CSTCR4M19G53Z-R0 [MURATA]
RESONATOR 4.19MHZ INDUST SMD;
| 型号： | CSTCR4M19G53Z-R0 |
| 厂家： | 
muRata |
| 描述： | RESONATOR 4.19MHZ INDUST SMD 晶体 谐振器 |
| 文件： | 总28页 (文件大小：972K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P16E.pdf
Oct.1,2018
Ceramic Resonators
(CERALOCKr)
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
•
All the products in this catalog comply
with EU RoHS.
•
EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
•
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Contents
Product specifications are as of October 2018.
CERALOCKr, CERALOCK(R) and "CERALOCK"
in this catalog are the trademarks of
Murata Manufacturing Co., Ltd.
Selection Guide
2
3
4
5
p2
p3
Part Numbering
1 MHz Chip Type -Tight Frequency
Tolerance for Automotive
p4
p6
2 MHz Chip Type -Standard Frequency
Tolerance for Automotive
Notice for Automotive
p8
Packaging for Automotive
p11
3 MHz Chip Type
-Tight Frequency Tolerance
for Consumer/Industrial Usage
p13
p15
p17
4 MHz Chip Type
-Standard Frequency Tolerance
for Consumer/Industrial Usage
5 MHz Lead Type
-Standard Frequency Tolerance
for Consumer/Industrial Usage
Notice for Consumer/Industrial Usage
MHz Chip Type
p19
p21
MHz Lead Type
Packaging for Consumer/Industrial Usage
MHz Chip Type
p22
p24
MHz Lead Type
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guide
Applications
Automotive
Consumer/Industrial
Tight Tolerance
Standard Tolerance
SMD
Tight Tolerance
Standard Tolerance
SMD
SMD
SMD
CSTNR_GH5C
CSTCR_G_B
CSTNR_GH5L
CSTCR_G
4.00–7.99MHz
4.00–7.99MHz
4.00–7.99MHz
4.00–7.99MHz
CSTNE_G_A
CSTNE_G
CSTNE_GH5C
CSTNE_GH5L
CSTCE_G_A
CSTCE_G
8.00–13.99MHz
8.00–13.99MHz
8.00–13.99MHz
8.00–13.99MHz
CSTNE_V_C
CSTNE_V
CSTNE_VH3C
CSTNE_VH3L
CSTCE_V_C
CSTCE_V
14.00–20.00MHz
14.00–20.00MHz
14.00–20.00MHz
14.00–20.00MHz
Leaded
CSTLS_G
3.40–10.00MHz
CSTLS_X
16.00–70.00MHz
Notice: "CERALOCKr for consumer" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics,
Physical Characteristics and so on. Please choose either "for consumer" or "for automotive" according to the required specification.
2
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
CERALOCKr (MHz)
(Part Number)
CS
1
T
2
NE 16M0
V
5
5
6
3
7
**** R0
3
4
8
9
7Load Capacity
1Product ID
Product ID
Code
Load Capacity
5pF
CS
Ceramic Resonators
1
2
3
5
6
10pF
2Frequency/Capacitance
15pF
Frequency/Capacitance
33/39pF
47pF
Code
MHz with Built-in Capacitance
T
3Structure/Size
8Individual Specification
Structure/Size
Round Lead Type
Small-cap Chip Type
Individual Specification
Four-digit alphanumerics express
"Individual Specification."
Code
LS
Code
****
CR/NR/CE/NE
With standard products, " Individual Specification" and " Packaging"
8
9
is omitted.
4Nominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M."
9Packaging
Packaging
Code
B0
5Design
Bulk
Radial Taping H0=18mm
Plastic Taping ø=180mm Reel
Plastic Taping ø=330mm Reel
Code
G
Design
A0
Thickness Shear mode
R0
Thickness Expander mode
Thickness Expander mode (3rd overtone)
V
R1
Fꢀꢁꢂ"'ꢂ*ꢀ2ꢂ.',%ꢀ'1ꢀꢂ..*'#"ꢀ2-ꢀ*#ꢂ"ꢀ27.#ꢀꢂ,"ꢀ.*ꢂ12'!ꢀ2ꢂ.',%ꢀ2-ꢀ!&'.ꢀ27.#@ꢀ
X
6Initial Frequency Tolerance
Initial Frequency Tolerance
Code
0.5ꢀ
0.3ꢀ
0.ꢁꢀ
0.07ꢀ
5
3
2
H
3
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2ꢀ18
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Resonators (CERALOCK )
r
1
MHz Chip Type -Tight Frequency Tolerance for Automotive
4.5±±.ꢀ
Chip type CERALOCK with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and package technology
r
*
±.6±±.±5
±.2±±.2
4.ꢀ max.
expertise has enabled the development of the chip
CERALOCK with built-in load capacitors.
This diverse series owes its development to MURATA's
original mass production techniques and high reliability,
and has achieved importance in the worldwide automotive
market.
r
±.4 (Ref.)
±.4 (Ref.)
±.4±±.ꢀ
±.4 (Ref.)
(3)
(2)
(ꢀ)
±.4±±.ꢀ
(ꢀ): Input
±.4±±.ꢀ
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTNR_GH5C
4.00-7.99MHz
*
±.75±±.ꢀ
ꢀ.5±±.ꢀ ꢀ.5±±.ꢀ
(in mm)
Features
1. High accuracy resonators whose total tolerance is
available for less than ±±,ꢀꢀꢀppm.
3.2±±±.ꢀ5
2. High reliability and available for a wide temperature range.
±. Oscillation circuits do not require external load capacitors.
4. Available for a wide frequency range.
*
±.ꢀ±±.ꢀ
3.± max.
±.4±±.ꢀ
5. Extremely small and have a low profile.
6. No adjustment is necessary for oscillation circuits.
7. Stable supply is ensured due to not using precious metal
(Paradium) in built-in Capacitance.
±.5± (ref.)
±.5± (ref.)
±.5± (ref.)
(3)
(2) (ꢀ)
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTNE_GH5C
*
8.00-13.99MHz
Applications
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
1. Cluster panel and Control panel
2. Safety control
Anti-lock Brake System, Electronic Stability Control,
Airbag, etc.
±. Engine ECU, Electronic Power Steering, Immobilizer, etc.
4. Car Air conditioner, Power Window,
Remote Keyless Entry system, etc.
5. Intelligent Transportation System
Lane Keeping System, Millimeter wave radar, etc.
6. Battery control for hybrid cars
3.2±±±.ꢀ5
*
±.ꢀ±±.ꢀ
±.4±±.ꢀ
3.± max.
±.5± (ref.)
±.5± (ref.)
±.5± (ref.)
(2) (ꢀ)
(3)
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
CSTNE_VH3C
14.00-20.00MHz
*
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(°C)
Frequency
(MHz)
Frequency Shift by Temperature
(%)
Part Number
CSTNR_GH5C
CSTNE_GH5C
CSTNE_VH3C
4.ꢀꢀ to 7.99
8.ꢀꢀ to 1±.99
14.ꢀꢀ to 2ꢀ.ꢀꢀ
±ꢀ.ꢀ7
±ꢀ.ꢀ7
±ꢀ.ꢀ7
±ꢀ.1±
±ꢀ.1±
±ꢀ.1±
-4ꢀ to 125
-4ꢀ to 125
-4ꢀ to 125
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
4
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Measuring Circuit of Oscillating Frequency
VDD
1
5pF
To Frequency Counter
Rf
ꢀMΩ
Rd
(3)
(ꢀ)
Cꢀ C2
(2)
Standard Land Pattern Dimensions
CSTNR_GH5C
(* This Land Pattern is not common to CSTCR_G.)
CSTNE_GH5C/CSTNE_VH3C
±.4
±.4
ꢀ.ꢀ
ꢀ.ꢀ
±.4
±.4 ±.8 ±.4 ±.8 ±.4
ꢀ.2
ꢀ.2
Land Pattern
ꢀ.5
ꢀ.5
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTNR_GH5C
CSTNE_GH5C
+±.2
+±.2
+±.ꢀ
±
+±.ꢀ
±
-±.ꢀ
-±.ꢀ
-±.2
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
CSTNE_VH3C
+±.2
+±.ꢀ
±
-±.ꢀ
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
5
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Resonators (CERALOCK )
r
MHz Chip Type -Standard Frequency Tolerance for Automotive
4.5±±.ꢀ
Chip type CERALOCK with built-in load capacitors
provides high accuracy in an extremely small package.
r
*
±.4±±.±5
(3)
±.2±±.2
(2)
(ꢀ)
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
2
4.ꢀ max.
CERALOCK with built-in load capacitors.
r
±.4 (Ref.) ±.4 (Ref.) ±.4 (Ref.)
±.8±±.ꢀ ±.8±±.ꢀ ±.8±±.ꢀ
This diverse series owes its development to MURATA's
original mass production techniques and high reliability,
and has achieved importance in the worldwide automotive
market.
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTCR_G_B
4.00-7.99MHz
*
±.4±±.ꢀ
ꢀ.5±±.ꢀ
±.4±±.ꢀ
ꢀ.5±±.ꢀ
±.4±±.ꢀ
±.75±±.ꢀ
(in mm)
Features
1. High reliability and available for a wide temperature range.
2. Oscillation circuits do not require external load capacitors.
3. Available for a wide frequency range.
3.2±±±.ꢀ5
*
4. Extremely small and have a low profile.
5. No adjustment is necessary for oscillation circuits.
±.ꢀ±±.ꢀ
3.± max.
±.4±±.ꢀ
±.5± (ref.)
±.5± (ref.)
±.5± (ref.)
(2) (ꢀ)
Applications
(3)
1. Cluster panel and Control panel
2. Safety control
Anti-lock Brake System, Electronic Stability Control,
Airbag, etc.
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTNE_G_A
8.00-13.99MHz
*
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
3. Engine ECU, Electronic Power Steering, Immobilizer, etc.
4. Car Air conditioner, Power Window,
Remote Keyless Entry system, etc.
5. Electronic Toll Collection system, Car Navigation, etc.
3.2±±±.ꢀ5
*
±.ꢀ±±.ꢀ
±.4±±.ꢀ
3.± max.
±.5± (ref.)
±.5± (ref.)
±.5± (ref.)
(2) (ꢀ)
(3)
(ꢀ): Input
(2): GND
(3): Output
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
: Frequency Marking
: EIAJ Monthly Code
CSTNE_V_C
14.00-20.00MHz
*
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(°C)
Frequency
(MHz)
Frequency Shift by Temperature
(%)
Part Number
CSTCR_G_B
CSTNE_G_A 8.00 to 13.99
CSTNE_V_C 14.00 to 20.00
4.00 to 7.99
0.50
0.50
0.50
0.15
0.20
0.15
-40 to 125
-40 to 125
-40 to 125
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
6
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Measuring Circuit of Oscillating Frequency
CSTNE_G_A/CSTNE_V_C/CSTCR_G_B
VDD
5pF
To Frequency Counter
Rf
ꢀMΩ
Rd
(3)
2
(ꢀ)
Cꢀ C2
(2)
Standard Land Pattern Dimensions
CSTCR_G_B
CSTNE_G_A/CSTNE_V_C
±.8 ±.7 ±.8 ±.7 ±.8
±.4 ±.8 ±.4 ±.8 ±.4
±.4
ꢀ.5
±.4
ꢀ.5
±.4
ꢀ.2
ꢀ.2
Land Pattern
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTCR_G_B
CSTNE_G_A
+±.2
+±.2
+±.ꢀ
±
+±.ꢀ
±
-±.ꢀ
-±.ꢀ
-±.2
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
CSTNE_V_C
+±.2
+±.ꢀ
±
-±.ꢀ
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
7
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Automotive
Soldering and Mounting (CSTCR_G_B/CSTNR_GH5C, CSTNE_G_A/GH5C, CSTNE_V_C/VH3C Series)
1. Soldering
(1) Reflow soldering
Please mount the component on a circuit board by reflow
soldering. Flow soldering is not acceptable.
Recommendable Flux and Solder
Please use rosin based flux,
not water soluble flux.
Flux
Peak
Please use solder (Sn-3.0Ag-0.5Cu) under
the following conditions: Standard thickness
of soldering paste: 0.10 to 0.15mm.
260
245
220
Solder
Heating
(220°C min.)
180
150
Pre-heating
(150 to 180°C)
Recommendable Soldering Profile
Gradual
Cooling
150 to 180°C
60 to 120s
30 to 60s
1s max.
Pre-heating
220°C min.
Heating
upper limit: 260°C
lower limit: 245°C
Peak Temperature
5s max.
60 to 120s
30 to 60s
Temperature shall be measured on the surface of component.
(2) Soldering with Iron
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
Recommendable Soldering with Iron
Heating of the soldering iron
350°C max.
30W max.
Watt
ø3mm max.
Shape of the soldering iron
Soldering Time
Solder
5s max. at one terminal
Sn-3.0Ag-0.5Cu
(3) Solder Volume
Please make the solder volume less than the height of
the substrate to avoid damage to the seal between the
metal cap and the substrate.
(4) Other
Do not reuse components removed from a circuit board
aꢀer soldering.
(5) Conditions for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
Continued on the following page.
8
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Automotive
Continued from the preceding page.
2. Wash
(1) Cleaning Solvents
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW
(2) Temperature Difference : dT *1
<
dT 60°C (dT=Component-solvent)
=
*1 ex. If the component is immersed at +90°C into
cleaning solvent at +60°C, then dT=30°C.
(3) Conditions
(a) Ultrasonic Wash
(b) Immersion Wash
1 minute max. in above solvent at +60°C max.
(Frequency: 28kHz, Output: 20W/l)
5 minutes max. in above solvent at +60°C max.
(c) Shower or Rinse Wash
5 minutes max. in above solvent at +60°C max.
(4) Drying
5 minutes max. by blowing air at +80°C max.
(5) Other
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
3. Coating
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to confirm
stable electrical characteristics are maintained.
Continued on the following page.
9
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Automotive
Continued from the preceding page.
Storage and Operating Conditions
1. Product Storage Conditions
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature changes.
Please store the products under the following
conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
(4) Please use the products immediately aꢀer the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
Expiration date (shelf life) of the products is six
months aꢀer delivery under the conditions of a
sealed and unopened package. Please use the products
within six months aꢀer delivery. ꢁf you store the
products for a long time (more than six months),
use carefully because the products may be degraded
in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
10
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging for Automotive
Minimum Quantity
Part Number
CSTCR_G_B
CSTNR_GH5C
CSTNE_G_A
CSTNE_GH5C
CSTNE_V_C
CSTNE_VH3C
Plastic Tape ø180mm
3,000
Plastic Tape ø330mm
9,000
Bulk
500
500
500
500
500
500
Reel Dimensions
a
a
b
b
b
b
3,000
9,000
3,000
9,000
3,000
9,000
3,000
9,000
3,000
9,000
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Dimensions of Reel
a
b
Trailer
160-190
Leader
Cover Film
Leader
Cover Film
Trailer
160-190
Empty Components
Empty
160 min.
Empty Components
Empty
160 min.
400-560
400-560
ø13.0 0.2
ø13.0 0.2
2.0 0.5
2.0 0.5
+1.0
0
+1.0
13.0
9.0
0
17.0 1.0
13.0 1.0
(in mm)
Dimensions of Taping
CSTNR_GH5C
CSTNE_GH5C
4.0 0.1
+0.1
+0.1
-0
ø1.5
4.0 0.1
ø1.5
-0.0
2.0 0.05
2.0 0.05
+0.2
-0.0
4.0 0.1
ø1.5 0.1
ø1.0
4.0 0.1
+0.10
2.2 0.1
1.50
-0.05
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(5°)
(7˚)
Cover Film
Cover Film
10°
10°
Direction of Feed
(in mm)
(in mm)
Direction of Feed
CSTNE_VH3C
Dimensions of Carrier Tape
4.0 0.1
+0.1
ø1.5
-0.0
2.0 0.05
+0.2
-0.0
1.50
4.0 0.1 ø1.0
+0.10
-0.05
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(5°)
Cover Film
10°
Direction of Feed
(in mm)
Continued on the following page.
11
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging for Automotive
Continued from the preceding page.
Dimensions of Taping
CSTCR_G_B
CSTNE_G_A
4.0 0.ꢀ
+0.ꢀ
-0.0
+0.ꢀ
-0
øꢀ.ꢁ
4.0 0.ꢀ
øꢀ.ꢁ
2.0 0.0ꢁ
2.0 0.0ꢁ
+0.ꢀ
-0
+0.2
-0.0
4.0 0.ꢀ
øꢀ.ꢁ
øꢀ.0
4.0 0.ꢀ
+0.ꢀ0
ꢀ.ꢁ0
-0.0ꢁ
2.2 0.ꢀ
Cover film peel strength force 0.ꢀ to 0.7N
Cover film peel speed 300mm/min.
Cover film peel strength force 0.ꢀ to 0.7N
(3°)
(7˚)
Cover film peel speed 300mm/min.
Cover Film
Cover Film
ꢀ0°
ꢀ0°
Direction of Feed
(in mm)
(in mm)
Direction of Feed
CSTNE_V_C
Dimensions of Carrier Tape
4.0 0.ꢀ
+0.ꢀ
øꢀ.ꢁ
-0.0
2.0 0.0ꢁ
+0.2
-0.0
ꢀ.ꢁ0
4.0 0.ꢀ øꢀ.0
+0.ꢀ0
-0.0ꢁ
Cover film peel strength force 0.ꢀ to 0.7N
Cover film peel speed 300mm/min.
(ꢁ°)
Cover Film
ꢀ0°
Direction of Feed
(in mm)
12
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Resonators (CERALOCK )
r
MHz Chip Type -Tight Frequency Tolerance for Consumer/Industrial Usage
4.5±±.ꢀ
Chip type CERALOCK with built-in load capacitors
provides high accuracy in an extremely small package.
MURATA's frequency adjustment and packaging technology
expertise has enabled the development of the chip
r
*
±.6±±.±5
±.2±±.2
4.ꢀ max.
CERALOCK with built-in load capacitors.
r
±.4 (Ref.)
±.4±±.ꢀ
±.4 (Ref.)
±.4±±.ꢀ
High-density mounting is made possible by the small
package and the elimination of the need for an external
load capacitor.
±.4 (Ref.)
(ꢀ)
±.4±±.ꢀ
(3)
(2)
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTNR_GH5L
4.00-7.99MHz
*
3
Features
±.75±±.ꢀ
ꢀ.5±±.ꢀ ꢀ.5±±.ꢀ
(in mm)
1. Oscillation circuits do not require external load capacitors.
2. Available for a wide frequency range.
3.2±±±.ꢀ5
3. Extremely small and have a low profile.
4. No adjustment is necessary for oscillation circuits.
5. Stable supply is ensured due to not using precious metal
(Paradium) in built-in Capacitance.
*
±.ꢀ±±.ꢀ
3.± max.
±.4±±.ꢀ
±.5± (ref.)
±.5± (ref.)
Applications
±.5± (ref.)
(3)
(2) (ꢀ)
1. Clock oscillators for USB (full-speed) controller ICs
2. Audio equipment and musical instruments, etc.
3. Other applications for replacement of Crystal units/
Oscillators
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTNE_GH5L
8.00-13.99MHz
*
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
3.2±±±.ꢀ5
*
±.ꢀ±±.ꢀ
±.4±±.ꢀ
3.± max.
±.5± (ref.)
±.5± (ref.)
±.5± (ref.)
(2) (ꢀ)
(3)
(ꢀ): Input
(2): GND
(3): Output
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
: Frequency Marking
: EIAJ Monthly Code
CSTNE_VH3L
14.00-20.00MHz
*
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(°C)
Frequency
(MHz)
Frequency Shift by Temperature
(%)
Part Number
CSTNR_GH5L
CSTNE_GH5L
CSTNE_VH3L
4.00 to 7.99
8.00 to 13.99
14.00 to 20.00
0.07
0.07
0.07
0.11
0.11
0.11
-20 to 85
-40 to 85
-40 to 85
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
13
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Measuring Circuit of Oscillating Frequency
CSTNR_GH5L/CSTNE_GH5L/CSTNE_VH3L
VDD
5pF
To Frequency Counter
Rf
ꢀMΩ
Rd
(3)
(ꢀ)
Cꢀ C2
(2)
Standard Land Pattern Dimensions
3
CSTNR_GH5L
(* This Land Pattern is not common to CSTCR_G.)
CSTNE_GH5L/CSTNE_VH3L
±.4
±.4
ꢀ.ꢀ
ꢀ.ꢀ
±.4
±.4 ±.8 ±.4 ±.8 ±.4
ꢀ.2
ꢀ.2
Land Pattern
ꢀ.5
ꢀ.5
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTNR_GH5L
CSTNE_GH5L
+±.2
+±.2
+±.ꢀ
±
+±.ꢀ
±
-±.ꢀ
-±.ꢀ
-±.2
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
CSTNE_VH3L
+±.2
+±.ꢀ
±
-±.ꢀ
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
14
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Resonators (CERALOCK )
r
MHz Chip Type -Standard Frequency Tolerance for Consumer/Industrial Usage
4.5±±.ꢀ
Chip type CERALOCK with built-in load capacitors
provides an extremely small package.
r
*
±.4±±.±5
(3)
±.2±±.2
(2)
(ꢀ)
MURATA's package technology expertise has enabled the
4.ꢀ max.
development of the Chip CERALOCK with built-in
r
load capacitors.
±.4 (Ref.) ±.4 (Ref.) ±.4 (Ref.)
±.8±±.ꢀ ±.8±±.ꢀ ±.8±±.ꢀ
High-density mounting can be realized because of the
small package and the elimination of the need for an
external load capacitor.
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTCR_G
4.00-7.99MHz
*
±.4±±.ꢀ
ꢀ.5±±.ꢀ
±.4±±.ꢀ
ꢀ.5±±.ꢀ
±.4±±.ꢀ
Features
±.75±±.ꢀ
(in mm)
1. Oscillation circuits do not require external load capacitors.
2. Available in a wide frequency range.
3.2±±±.ꢀ5
3. Extremely small and have a low profile.
4. No adjustment is necessary for oscillation circuits.
*
±.ꢀ±±.ꢀ
3.± max.
±.4±±.ꢀ
Applications
4
1. Clock oscillators for microprocessors
2. Small electronic equipment such as handheld phone,
digital video camcorder (DVC), digital still camera (DSC),
portable audio player, etc.
3. Storage media and memory (HDD, Optical storage device,
FDD, Flash memory card, etc.)
±.5± (ref.)
±.5± (ref.)
±.5± (ref.)
(2) (ꢀ)
(3)
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
(ꢀ): Input
(2): GND
(3): Output
: Frequency Marking
: EIAJ Monthly Code
CSTNE_G
8.00-13.99MHz
*
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
4. Office automation equipment (Mobile PC, Mouse,
Keyboard, etc.)
3.2±±±.ꢀ5
5. Audio-visual applications (TV, DVD-HDD recorder, Audio
equipment, Remote control, etc.)
6. Home appliances (Air conditioner, Microwave oven,
Refrigerator, Washing machine, etc.)
*
±.ꢀ±±.ꢀ
±.4±±.ꢀ
3.± max.
±.5± (ref.)
±.5± (ref.)
±.5± (ref.)
(2) (ꢀ)
(3)
(ꢀ): Input
(2): GND
(3): Output
±.4±±.ꢀ ±.4±±.ꢀ ±.4±±.ꢀ
: Frequency Marking
: EIAJ Monthly Code
CSTNE_V
14.00-20.00MHz
*
±.4±±.ꢀ
ꢀ.2±±.ꢀ ꢀ.2±±.ꢀ
(in mm)
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(°C)
Frequency
(MHz)
Frequency Shift by Temperature
(%)
Part Number
CSTCR_G
CSTNE_G
CSTNE_V
4.00 to 7.99
8.00 to 13.99
14.00 to 20.00
0.50
0.50
0.50
0.20
0.20
0.30
-20 to 80
-40 to 85
-40 to 85
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
15
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Measuring Circuit of Oscillating Frequency
CSTCR_G/CSTNE_G/CSTNE_G_Z/CSTNE_V
VDD
5pF
To Frequency Counter
Rf
ꢀMΩ
Rd
(3)
(ꢀ)
Cꢀ C2
(2)
Standard Land Pattern Dimensions
CSTCR_G
(* This Land Pattern is not common to
CSTNR_GH5C, CSTNR_GH5L.)
CSTNE_G/CSTNE_V
±.8 ±.7 ±.8 ±.7 ±.8
±.4 ±.8 ±.4 ±.8 ±.4
4
±.4
ꢀ.5
±.4
ꢀ.5
±.4
ꢀ.2
ꢀ.2
Land Pattern
Land Pattern
(in mm)
(in mm)
Frequency Temperature Characteristics
CSTCR_G
CSTNE_G
+±.2
+±.2
+±.ꢀ
±
+±.ꢀ
±
-±.ꢀ
-±.ꢀ
-±.2
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
CSTNE_V
+±.2
+±.ꢀ
±
-±.ꢀ
-±.2
-6± -4± -2±
±
+2± +4± +6± +8± +ꢀ±± +ꢀ2± +ꢀ4±
Temperature (°C)
16
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Resonators (CERALOCK )
r
MHz Lead Type -Standard Frequency Tolerance for Consumer/Industrial Usage
8.0±±.0
3.0±±.0
MURATA's ceramic resonator, CERALOCK with built-in
r
load capacitors, has been widely applied as the most
suitable component for clock oscillators in a broad
range of microprocessors.
***
The CSTLS series can be used in the design of
oscillation circuits not requiring external load
capacitors, enabling both high-density mounting and
cost reduction.
7.0 (Ref.)
2.5±0.2
(3)
(2)
(±)
CSTLS_G
3.40-10.00MHz
: Frequency Marking
: Vender’s Code
***: Weekly Date Code
2.5±0.2
Features
(in mm)
1. Oscillation circuits do not require external load capacitors.
There is some variation in built-in capacitance values
applicable to various IC.
5.5±±.0
T *±
2. Stable over a wide temperature range.
3. Compact, lightweight and exhibit superior shock
resistance performance.
*
4. Enable the design of oscillator circuits requiring no
adjustment.
(3)
(2)
(±)
5. Cost-effective and reliable availability
T*± : 3.5±±.0 (±6.00ꢀ32.ꢁꢁMꢂH)
3.0±±.0 (33.00ꢀ70.00MꢂH)
: Frequency Marking
Applications
CSTLS_X
16.00-70.00MHz
*
: EIAJ Monthly Code
2.5±0.2 2.5±0.2
1. DTMF generators
(in mm)
5
2. Clock oscillators for microcomputers
3. Remote control units
4. Automated office equipment
Initial
Frequency Tolerance
(%)
Operating
Frequency
(MHz)
Frequency Shift by Temperature
(%)
Part Number
Temperature Range
(°C)
CSTLS_G
CSTLS_X
3.40 to 10.00
16.00 to 70.00
0.5
0.5
0.2 ꢀ-0.4ꢁ to +0.2ꢁ:Built-in Capacitance 47pF type]
0.2
-20 to 80
-20 to 80
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
The order quantity should be an integral multiple of the "Minimum Quantity" shown on the packaging page.
Measuring Circuit of Oscillating Frequency
32-bit Microcomputer
VDD
To Frequency Counter
Rf
Rd
(±)
(3)
C± C2
(2)
17
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Frequency Temperature Characteristics
CSTLS_G
CSTLS_X
+0.50
0.3
0.2
0.±
0.0
+0.25
0
ꢀ50
ꢀ30
ꢀ±0
±0
30
50
70
ꢁ0
±±0
±30
ꢀ40
0
40
80
±20
Temperature (°C)
Temperature (°C)
ꢀ
ꢀ
ꢀ
0.±
0.2
0.3
ꢀ0.25
ꢀ0.50
5
18
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Consumer/Industrial Usage -MHz Chip Type
Soldering and Mounting (CSTCR_G/CSTNR_GH5L, CSTNE_G/GH5L, CSTNE_V/VH3L Series)
1. Soldering
(1) Reflow soldering
Please mount the component on a circuit board by reflow
soldering. Flow soldering is not acceptable.
Recommendable Flux and Solder
Please use rosin based flux,
not water soluble flux.
Flux
Peak
Please use solder (Sn-3.0Ag-0.5Cu) under
the following conditions: Standard thickness
of soldering paste: 0.10 to 0.15mm.
260
245
220
Solder
Heating
(220°C min.)
180
150
Pre-heating
(150 to 180°C)
Recommendable Soldering Profile
Gradual
Cooling
150 to 180°C
60 to 120s
30 to 60s
1s max.
Pre-heating
220°C min.
Heating
upper limit: 260°C
lower limit: 245°C
Peak Temperature
5s max.
60 to 120s
30 to 60s
Temperature shall be measured on the surface of component.
(2) Soldering with Iron
(4) Other
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
Do not reuse components removed from a circuit board
aꢀer soldering.
(5) Conditions for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
Recommendable Soldering with Iron
350°C max.
30W max.
Heating of the soldering iron
Watt
ø3mm max.
Shape of the soldering iron
Soldering Time
Solder
5s max. at one terminal
Sn-3.0Ag-0.5Cu
(3) Solder Volume
Please make the solder volume less than the height of
the substrate to avoid damage to the seal between the
metal cap and the substrate.
2. Washing / Coating
Conformal coating or washing of the component is not
acceptable, because it is not hermetically sealed.
Please contact us if you need a washable component.
Continued on the following page.
19
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Consumer/Industrial Usage -MHz Chip Type
Continued from the preceding page.
Storage and Operating Conditions
1. Product Storage Conditions
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
(4) Please use the products immediately aꢀer the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Expiration date (shelf life) of the products is six
months aꢀer delivery under the conditions of a
sealed and unopened package. Please use the
products within six months aꢀer delivery. ꢁf you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
20
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice for Consumer/Industrial Usage -MHz Lead Type
Soldering and Mounting (CSTLS_G, CSTLS_X Series)
The component cannot withstand washing.
Please do not apply excessive mechanical stress to the
component and lead terminals during soldering.
Storage and Operating Conditions
1. Product Storage Conditions
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
and/or dusty places.
(3) Please do not store the products in places
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
Please store the products in a room where the
temperature/humidity is stable, and avoid
places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
(4) Please use the products immediately aꢀer the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of ceramic elements.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
Expiration date (shelf life) of the products is six
months aꢀer delivery under the conditions of a
sealed and unopened package. Please use the
products within six months aꢀer delivery. ꢁf you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
21
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging for Consumer/Industrial Usage -MHz Chip Type
Minimum Quantity
Part Number
Plastic Tape ø180mm
3,000
Plastic Tape ø330mm
9,000
Bulk
500
500
500
500
500
500
Reel Dimensions
CSTCR_G
a
a
b
b
b
b
CSTNR_GH5L
CSTNE_G
3,000
9,000
3,000
9,000
CSTNE_GH5L
CSTNE_V
3,000
9,000
3,000
9,000
CSTNE_VH3L
3,000
9,000
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Dimensions of Reel
a
b
Trailer
160-190
Leader
Cover Film
Leader
Cover Film
Trailer
160-190
Empty
Components
Empty
160 min.
Empty Components
Empty
160 min.
400-560
400-560
ø13.0 0.ꢀ
ø13.0 0.ꢀ
ꢀ.0 0.5
ꢀ.0 0.5
+1.0
0
+1.0
13.0
9.0
–0
13.0 1.0
17.0 1.0
(in mm)
Dimensions of Taping
CSTNR_GH5L
CSTNE_GH5L
4.0 0.1
+0.1
-0.0
+0.1
-0
ø1.5
4.0 0.1
ø1.5
ꢀ.0 0.05
ꢀ.0 0.05
+0.ꢀ
-0.0
4.0 0.1
ø1.5 0.1
ø1.0
4.0 0.1
+0.10
1.50
-0.05
ꢀ.ꢀ 0.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(5°)
(7˚)
Cover Film
Cover Film
10°
10°
Direction of Feed
(in mm)
(in mm)
Direction of Feed
CSTNE_VH3L
Dimensions of Carrier Tape
4.0 0.1
+0.1
ø1.5
-0.0
ꢀ.0 0.05
+0.ꢀ
-0.0
1.50
4.0 0.1 ø1.0
+0.10
-0.05
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(5°)
Cover Film
10°
Direction of Feed
(in mm)
Continued on the following page.
22
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging for Consumer/Industrial Usage -MHz Chip Type
Continued from the preceding page.
Dimensions of Taping
CSTCR_G
CSTNE_G
4.0 0.ꢀ
+0.ꢀ
-0.0
+0.ꢀ
-0
øꢀ.ꢁ
4.0 0.ꢀ
øꢀ.ꢁ
2.0 0.0ꢁ
2.0 0.0ꢁ
+0.ꢀ
-0
+0.2
-0.0
4.0 0.ꢀ
øꢀ.ꢁ
øꢀ.0
4.0 0.ꢀ
+0.ꢀ0
ꢀ.ꢁ0
-0.0ꢁ
2.2 0.ꢀ
Cover film peel strength force 0.ꢀ to 0.7N
Cover film peel speed 300mm/min.
Cover film peel strength force 0.ꢀ to 0.7N
(3°)
(7˚)
Cover film peel speed 300mm/min.
Cover Film
Cover Film
ꢀ0°
ꢀ0°
Direction of Feed
(in mm)
(in mm)
Direction of Feed
CSTNE_V
Dimensions of Carrier Tape
4.0 0.ꢀ
+0.ꢀ
øꢀ.ꢁ
-0.0
2.0 0.0ꢁ
+0.2
-0.0
ꢀ.ꢁ0
4.0 0.ꢀ øꢀ.0
+0.ꢀ0
-0.0ꢁ
Cover film peel strength force 0.ꢀ to 0.7N
Cover film peel speed 300mm/min.
(ꢁ°)
Cover Film
ꢀ0°
Direction of Feed
(in mm)
23
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging for Consumer/Industrial Usage -MHz Lead Type
Minimum Quantity
Part Number
Ammo Pack
2,000
Bulk
500
500
CSTLS_G (3.40 to 10.0MHz)
CSTLS_X (16.00 to 70.00MHz)
2,000
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Tape Dimensions of CSTLS_G
P2
P
dh dh
dS
D
M
M
* * *
* * *
d
D0
P1 F1 F2
P0
t
Direction of Feed
Item
Code
Dimensions
Tolerance
1.0
Remarks
Width of diameter
Height of resonator
D
A
8.0
5.5
0.5
Dimensions of terminal
d
ø0.48
5.0 min.
12.7
12.7
3.85
0.05
–
Lead length under the hold down tape
Pitch of component
L1
P
0.5
Tolerance for Pitches 10xP0=127 1
Pitch of sprocket hole
P0
P1
0.2
Length from sprocket hole center to lead
0.5
Length from sprocket hole center to
component center
P2
6.35
0.5
Lead spacing (I)
F1
F2
2.5
0.2
0.2
1.0
0.5
–
Lead spacing (II)
2.5
Slant forward or backward
Width of carrier tape
dh
0
1mm max.
W
18.0
6.0 min.
9.0
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
W0
W1
W2
Hold down tape does not exceed the carrier tape.
0.5
+0.5
0
−0
Distance between the center of
sprocket hole and lead stopper
H0
18.0
0.5
Total height of resonator
Diameter of sprocket hole
Total tape thickness
Body tilt
H1
D0
t
23.5
ø4.0
0.6
0
1.0
0.2
0.2
1.0
dS
(in mm)
Continued on the following page.
24
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P16E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging for Consumer/Industrial Usage -MHz Lead Type
Continued from the preceding page.
Tape Dimensions of CSTLS_X
P2
P
dh dh
D
dS
d
D0
P1 F1 F2
P0
Direction of Feed
t
Item
Width of diameter
Code
D
Dimensions
5.5
Tolerance
1.0
Remarks
Height of resonator
Dimensions of terminal
A
6.5
0.5
d
ø0.48
5.0 min.
12.7
0.05
–
Lead length under the hold down tape
Pitch of component
L1
P
0.5
Tolerance for Pitches 10xP0=127 1
Pitch of sprocket hole
P0
P1
12.7
0.2
Length from sprocket hole center to lead
3.85
0.5
Length from sprocket hole center to
component center
P2
6.35
0.5
Lead spacing (I)
F1
F2
2.5
0.2
0.2
1.0
0.5
–
Lead spacing (II)
2.5
Slant forward or backward
Width of carrier tape
dh
0
1mm max.
W
18.0
6.0 min.
9.0
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
W0
W1
W2
Hold down tape does not exceed the carrier tape.
0.5
+
−
0.5
0
0.0
Distance between the center of
sprocket hole and lead stopper
H0
18.0
0.5
Total height of resonator
Diameter of sprocket hole
Total tape thickness
Body tilt
H1
D0
t
24.5
ø4.0
0.6
0
1.0
0.2
0.2
1.0
dS
(in mm)
25
P16E.pdf
Oct.1,2018
Cat. No. P16E-27
Global Locations
For details please visit www.murata.com
Note
1 Export Control
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
3 Product specifications in this catalog are as of
October 2018. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
1
2
3
4
5
6
Aircraf equipment
Aerospace equipment
Undersea equipment
Power plant equipment
Medical equipment
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
Transportation equipment (vehicles, trains,
ships, etc.)
7
8
Traffic signal equipment
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10 Application oꢀ similar complexity and/or
reliability requirements to the applications
listed above
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Murata Manufacturing Co., Ltd.
www.murata.com
相关型号：
©2020 ICPDF网 联系我们和版权申明