DA102C [MURATA]
Transformers for Digital Audio Data Transmission; 变形金刚的数字音频数据传输型号: | DA102C |
厂家: | muRata |
描述: | Transformers for Digital Audio Data Transmission |
文件: | 总3页 (文件大小:131K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DA100 Series
Transformers for Digital Audio Data Transmission
SELECTION GUIDE
Max.
Leakage
Primary
Inductance
(10kHz, 50mV)
Isolation
(Flash tested
Inductance
for 1 second)
Order Code
(100kHz, 10mV)
mH
μH
Vμs
15
dB
dB
Vrms
2000
DA101C
DA102C
DA103C
1:1
1.00 - 1.59
0.22
46.80
52.10
FEATURES
ꢀRoHS compliant
1:1
1:1
2.00 - 3.00
4.00 - 5.96
0.39
0.91
20
28
40.40
36.30
49.70
46.40
ꢀCompatible with leading chip sets
ꢀ2kVrms isolation
ORDER CODE DETAILS
ꢀIndustry-standard pinout
ꢀSurface mount option
ꢀUL 94 V-0 package materials
ꢀLow profile
Order Code
Package Type
Packaging Type
Tube
Quantity
DAXXXC
DAXXXMC
DAXXXMC-R
6 Pin DIL
6 Pin SM
6 Pin SM
50
50
Tube
ꢀSuitable for both 75 & 110Ω circuits
ꢀToroidal construction
ꢀCompliant with AES/EBU standards
ꢀFully encapsulated
Tape & Reel
500
ABSOLUTE MAXIMUM RATINGS
Operating free air temperature range
0°C to 70°C
–40°C to 125°C
Storage temperature range
DESCRIPTION
The Digital Audio Range of transformers is
designed to improve the balance of transmitter
and receiver circuitry in hi-fi equipment,
video games and other applications requiring
high-performance digital audio transmission.
Compliant with AES/EBU recommendations for the
digital audio interface, offering optimised shunt
capacitance between primary and secondary
windings. Capable of operating over the audio
data rate frequency range, providing isolation from
50-60Hz noise.
All specifications typical at TA =25°C
TECHNICAL NOTES
ISOLATION VOLTAGE
REPEATED HIGH-VOLTAGE ISOLATION TESTING
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Volt-
age’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ testing of a barrier component can actually degrade
are all terms that relate to the same thing, a test voltage,
applied for a specified time, across a component designed
to provide electrical isolation, to verify the integrity of that
isolation.
It is well known that repeated high-voltage isolation
isolation capability, to a lesser or greater degree
depending on materials, construction and environ-
ment. This series has toroidal isolation transformers,
with no additional insulation between primary and
secondary windings of enameled wire. While parts
can be expected to withstand several times the
stated test voltage, the isolation capability does de-
pend on the wire insulation. Any material, including
this enamel (typically polyurethane) is susceptible
to eventual chemical degradation when subject to
very high applied voltages thus implying that the
number of tests should be strictly limited. We there-
fore strongly advise against repeated high voltage
isolation testing, but if it is absolutely required, that
the voltage be reduced by 20% from specified test
voltage.
All products in this series are 100% production tested at
their stated isolation voltage.
A question commonly asked is, “What is the continuous
voltage that can be applied across the part in normal opera-
tion?”
For a part holding no specific agency approvals both input
and output should normally be maintained within SELV limits
i.e. less than 42.4V peak, or 60VDC. The isolation test volt-
age represents a measure of immunity to transient voltages
and the part should never be used as an element of a safety
isolation system. The part could be expected to function cor-
rectly with several hundred volts offset applied continuously
across the isolation barrier; but then the circuitry on both
sides of the barrier must be regarded as operating at an
unsafe voltage and further isolation/insulation systems must
form a barrier between these circuits and any user-acces-
sible circuitry according to safety standard requirements.
This consideration equally applies to agency recog-
nized parts rated for better than functional isolation
where the wire enamel insulation is always supple-
mented by a further insulation system of physical
spacing or barriers.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KMP_DA100C_C02 Page 1 of 3
DA100 Series
Transformers for Digital Audio Data Transmission
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
6 Pin DIL
6 Pin SM
0.50
(12.70)
0.375
(9.52) Max.
0.375
(9.52) Max.
Top View
1
Top View
1
3
6
4
1
2
6
5
0.354
(9.0) Max.
0.354
(9.0) Max.
1
1
1
DA101C
DA103MC
4
3
XYYWW
XYYWW
0.25
(6.35)
0.25
(6.35)
0.135 0.02
(3.44 0.50)
0.012 (0.30)
0.007 (0.20)
0.04
(0.90)
0.025 (0.63)
0.021 (0.53)
0.10
(2.54)
0.025 (0.63)
0.021 (0.53)
0.012 (0.30)
0.008 (0.20)
0.20
(5.08)
0.40
(10.16)
Unless otherwise stated all dimensions in inches (mm) 0.01 (0.25).
All pins on a 0.1 (2.54) pitch and within 0.01 (0.25) of true position.
Package Weight 0.93g Typ.
RECOMMENDED FOOTPRINT DETAILS
6 Pin DIL
6 Pin SM
0.10 (2.54)
0.06 (1.60)
0.10 (2.54)
0.10 (2.54)
+0.006 (0.15)
-0.000 (0.00)
Ø0.05 (1.20)
0.04
(1.00)
0.45
(11.50)
Unless otherwise stated all dimensions in inches (mm)
0.01 (0.25). All pins on a 0.1 (2.54) pitch and within
0.01 (0.25) of true position.
SOLDERING INFORMATION1
Pin finish
TUBE OUTLINE DIMENSIONS
0.43
Bright tin
(10.95)
300˚C for 10 seconds
220˚C
Peak wave solder temperature
Peak reflow temperature
Unless otherwise stated all
dimensions in inches (mm)
0.01 (0.25).
0.16 (4.00)
1
For further information, please visit www.murata-ps.com/rohs
0.023 0.005
(0.60 0.15)
0.51
(12.95)
Tube length: 18.3 0.08
(465 2).
Tube material: Antistatic coated
clear pvc.
0.22 (5.50)
0.15
(3.80)
0.62 (15.70)
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KMP_DA100C_C02 Page 2 of 3
DA100 Series
Transformers for Digital Audio Data Transmission
TAPE & REEL SPECIFICATIONS
REEL OUTLINE DIMENSIONS
*
2.36 (60) Min.
Ø
Ø15.039 (382) Max.
0.94-1.08 (23.9-27.4)
0.53 (13.50)
0.50 (12.80)
Leader section
15.7 (400) Min.
3.9 (100)
Min.
0.059 (1.50)
Min.
1.20
(30.4) Max.
ꢀ
Goods
enclosure
section
ꢀ
0.96 (24.4)
1.04 (26.4)
Trailer section
6.3 (160) Min.
Unless otherwise stated all
dimensions in inches (mm) 0.01(0.25).
Ø0.80 (20.20) Min.
*
Includes flange distortion at outer edge.
ꢀ Measured at hub.
TAPE OUTLINE DIMENSIONS
+0.004
-0.000
+0.10
)
-0.00
0.157 (4.00)
0.059
(1.50
0.069 (1.75)
0.079 (2.00)
Cover tape
0.369 (9.37)
0.472 (12.00)
0.024 (0.60) Max.
0.283 (7.20)
Unless otherwise stated all
Direction of unreeling
dimensions in inches (mm) 0.01(0.25).
USA:
Canada: Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com
UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com
Mansfield (MA), Tel: (800) 233 2765, email: sales@murata-ps.com
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com
Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com
Japan: Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com
Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com
Website: www.murata-ps.jp
www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
China:
Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com
Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com
notice.
© 2008 Murata Power Solutions, Inc.
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KMP_DA100C_C02 Page 3 of 3
相关型号:
DA102J11B202HQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
DA102J11B215DQF
Rocker Switch, SPST, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount, ROHS COMPLIANT
ITT
DA102J11B215PQF
Rocker Switch, SPST, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount, ROHS COMPLIANT
ITT
DA102J11B217HQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Panel Mount, ROHS COMPLIANT
ITT
DA102J11B2AHQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Through Hole-right Angle, ROHS COMPLIANT
ITT
DA102J11G202NQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
DA102J11G202PQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
DA102J11G202QF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
DA102J11G215PQF
Rocker Switch, SPST, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount, ROHS COMPLIANT
ITT
DA102J11G217NQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Panel Mount, ROHS COMPLIANT
ITT
DA102J11G2ANQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Through Hole-right Angle, ROHS COMPLIANT
ITT
DA102J11G2APQF
Rocker Switch, SPST, Latched, Solder Terminal, Rocker Actuator, Through Hole-right Angle, ROHS COMPLIANT
ITT
©2020 ICPDF网 联系我们和版权申明