DEA1X3A271J [MURATA]
Safety Certified Ceramic Capacitors; 安全认证型陶瓷电容器型号: | DEA1X3A271J |
厂家: | muRata |
描述: | Safety Certified Ceramic Capacitors |
文件: | 总72页 (文件大小:1846K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C85E.pdf
08.10.29
Safety Certified
Ceramic Capacitors/
High Voltage
Ceramic Capacitors
Cat.No.C85E-2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
sales representatives or product engineers before ordering.
08. .10.29
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for EU RoHS Compliant
•
All the products in this catalog comply with EU RoHS.
•
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
•
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
2
CONTENTS
Part Numbering
2
4
1
2
3
4
Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2-
Type KH (Basic Insulation) -IEC60384-14 Class X1, Y2-
Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1-
Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1-
Type KY/KH/KX Specifications and Test Methods
3
6
8
4
10
12
16
17
20
23
25
28
29
31
33
36
39
42
44
47
49
51
53
55
57
58
60
68
69
5
5
DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan-
DEJ Series Specifications and Test Methods
6
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
Safety Certified Ceramic Capacitors Packaging
7
Safety Certified Ceramic Capacitors !Caution
Safety Certified Ceramic Capacitors Notice
8
6
7
DES Series (125 deg. C Guaranteed/ Low-dissipation Factor/ DC500V-1kV)
DES Series Specifications and Test Methods
9
DEH Series (125 deg. C Guaranteed/ Low-dissipation Factor/ DC250V-3.15kV)
DEH Series Specifications and Test Methods
10
11
8
DEA Series (125 deg. C Guaranteed/ Class 1/ DC1k-3.15kV)
DEA Series Specifications and Test Methods
9
DEB Series (Class 2/ DC1k-3.15kV)
DEB Series Specifications and Test Methods
10
11
DEC Series (Class 1, 2/ DC6.3kV)
DEC Series Specifications and Test Methods
DEF Series (Only for LCD Backlight Inverter Circuit/ 6.3kVp-p)
DEF Series Specifications and Test Methods
High Voltage Ceramic Capacitors Characteristics Data (Typical Example)
High Voltage Ceramic Capacitors Packaging
High Voltage Ceramic Capacitors !Caution
High Voltage Ceramic Capacitors Notice
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Safety Standard Certified Ceramic Capacitors
(Part Number)
DE
2
E3 KH 102
M
N3
A
q
w
e
r
t
y
u
i o
qProduct ID
yCapacitance Tolerance
Product ID
Code
Capacitance Tolerance
J
K
M
Z
T5%
T10%
Safety Standard Certified Ceramic Capacitors /
High Voltage Ceramic Capacitors
DE
T20%
wSeries Category
W80% , Y20%
Code
Outline
Contents
uLead Style
IEC60384-14 Class X1, Y1
IEC60384-14 Class X1, Y2
1
2
Safety Standard
Certified
Dimensions (mm)
Lead
Code
Lead
Spacing
Pitch of
"Products which are based on
the Electrical Appliance and
Material Safety Law of Japan"
Style
Lead Diameter
AC250V
(r.m.s.)
Components
J
A2
A3
A4
A5
B2
B3
B4
B5
C3
D3
N2
N3
N4
N5
N7
P3
5
Vertical
Crimp
Long
In case of Electrical Appliance and Material Safety Law of Japan, first
three digits (qProduct ID and wSeries Category) express "Series
Name".
7.5
10
10
5
ø0.6T0.05
ø0.6W0.1,Y0.05
ø0.6T0.05
Yꢀ
Yꢀ
In case of Safety Certified Capacitors, first three digits express
product code. The following fourth figure expresses certified type
shown in rSafety Standard Certified Type column.
Vertical
Crimp
Short
7.5
10
10
7.5
7.5
5
eTemperature Characteristics
ø0.6W0.1, Y0.05
ø0.6T0.05
Straight Long
Straight Short
Yꢀ
Yꢀ
Temperature
Cap.Change
or Temp. Coeff.
Temperature
Range
Code
Characteristics
ø0.6T0.05
B3
E3
F3
1X
B
E
T10%
12.7
15
W20% ,Y55%
Y25 to W85D
7.5
10
10
7.5
7.5
ø0.6T0.05
Vertical
Crimp
Taping
F
W30% ,Y80%
25.4
25.4
30
SL
W350 to Y1000ppm/D
W
20 to W85D
ø0.6W0.1, Y0.05
ø0.6T0.05
rRated Voltage/Safety Standard Certified Type
Straight Taping
ø0.6T0.05
15
Rated Voltage
Code
E2
iPackaging
AC250V
Code
A
Packaging
X1, Y2; AC250V, (Safety Standard Certified Type KH)
X1, Y2; AC250V, (Safety Standard Certified Type KY)
X1, Y1; AC250V, (Safety Standard Certified Type KX)
KH
KY
Ammo Pack Taping Type
Bulk Type
B
KX
tCapacitance
oIndividual Specification Code
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two numbers.
In case part number cannot be identified without "Individual
Specification", it is added at the end of part number. Expressed
by three-digit alphanumerics.
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors (250V-6.3kV)
(Part Number)
DE
B
B3 3A 102
K
N2
A
q
w
e
r
t
y
u
i o
qProduct ID
yCapacitance Tolerance
Product ID
Code
Capacitance Tolerance
T0.25pF
C
D
J
High Voltage Ceramic Capacitors (250V-6.3kV) /
Safety Standard Certified Ceramic Capacitors
DE
T0.5pF
T5%
wSeries Category
K
Z
T10%
Code
A
Outline
Contents
W80% , Y20%
Class 1 (Char. SL) DC1-3.15kV Rated
Class 2 DC1-3.15kV Rated
Class 1, 2 DC6.3kV Rated
uLead Style
B
C
Dimensions (mm)
Lead
Code
Style
High Temperature Guaranteed,
Lead
Spacing
Pitch of
Components
H
High Voltage
Lead Diameter
Low-dissipation Factor (Char. R, C)
A2
A3
5
High Temperature Guaranteed,
Low-dissipation Factor (Char. D)
Vertical
Crimp
Long
S
F
7.5
10
5
ø0.6T0.05
Yꢀ
Yꢀ
LCD Backlight Inverter Circuit
A4
First three digits (qProduct ID and wSeries Category) express "Series
B2/J2
B3/J3
B4
Vertical
Crimp
Short
Name".
7.5
10
5
ø0.6T0.05
eTemperature Characteristics
C1
ø0.5T0.05
ø0.6T0.05
C3
7.5
10
7.5
5
Temperature
Characteristics
Cap. Change
or Temp. Coeff.
Temperature
Range
Straight
Long
Code
Yꢀ
Yꢀ
C4
B3
E3
F3
B
E
F
T10%
CD
D1
ø0.5T0.05
ø0.5T0.05
ø0.6T0.05
ø0.5T0.05
W20% ,Y55%
W30% ,Y80%
T20%
Y25 to W85D
Straight
Short
D3
7.5
7.5
5
Y25 to W85D
W85 to W125D
Y25 to W85D
W85 to W125D
Y25 to W125Dꢀ
DD
N2
C3
R3
C
R
W15% ,Y30%
T15%
12.7
15
Vertical
Crimp
Taping
N3
7.5
7.5
5
ø0.6T0.05
ø0.6T0.05
W15% ,Y30%
N7
30
D3
1X
2C
D
W20% ,Y30%
ꢀ
P2
12.7
15
Straight
Taping
SL
CH
W350 to Y1000ppm/Dꢀ W20 to W85Dꢀ
P3
7.5
0T60ppm/D
W20 to W85D
iPackaging
rRated Voltage
Code
A
Packaging
Rated Voltage
DC250V
DC500V
DC1kV
Code
2E
Ammo Pack Taping Type
Bulk Type
B
2H
3A
3D
3F
oIndividual Specification Code
In case part number cannot be identified without "Individual
Specification", it is added at the end of part number. Expressed
by three-digit alphanumerics.
DC2kV
DC3.15kV
DC6.3kV
6.3kVp-p
3J
LH
tCapacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two numbers.
3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2-
D max.
T max.
■ Features
1. We design capacitors in much more compact size than
type KH, having reduced the diameter by 25% max.
e
2. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
F±1.0
3. Dielectric strength:
AC2000V (In case of lead spacing F=5mm)
AC2600V (In case of lead spacing F=7.5mm)
ød
(in mm)
4. Class X1/Y2 capacitors which are certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
NSW.
[Bulk]
Lead Code
Coating Extension e
Up to the end of crimp
ød
Vertical Crimp Long (A2, A3)
0.6±0.05
A2, A3
5. Coated with flame-retardant epoxy resin
(conforming to UL94V-0 standard).
D max.
T max.
6. Cost-saving automatic insertion available.
■ Applications
e
1. Ideal for use as X/Y capacitors for AC line filter
and primary-secondary coupling on switching power
supplies and AC adapters.
ød
F±0.8
2. Ideal for use on D-A isolation and noise absorption
for DAA modems without transformers.
(in mm)
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Short (B2, B3)
Up to the end of crimp
0.6±0.05
B2, B3
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
■ Standard Certification
■ Marking
Example
Item
Standard No.
UL1414
Certified No.
E37921
Rated Voltage
UL
q Type Designation KY
CSA
E384-14
1283280
w Nominal Capacitance
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
(Under 100pF: Actual value,
100pF and over: Marked with 3 figures)
VDE
40006273
w
e
r
472M
e Capacitance Tolerance
q
KY250~
BSI
KM 37901
r Company Name Code
X1 Y2
8
15
: Made in Thailand
: Made in Taiwan
AC250V(r.m.s.)
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
812168
314115
24197
P08209361
08.0710
t
65
8
t Manufactured Date Code
Class Code X1Y2
Rated Voltage Mark
IEC 60384-14
EN 60384-14
250~
IEC 60384-14
AS3250
NSW
6824
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Lead Spacing F=7.5mm
AC Rated
Voltage
(Vac)
Body
Dia. D
(mm)
Lead
Body
Lead
Lead
Lead
Temp.
Char.
Capacitance
(pF)
Part Number
Spacing F Thickness T Package
Package
Package
(mm)
(mm)
Long Bulk Short Bulk Taping (1)
DE21XKY100JpppM02
DE21XKY150JpppM02
DE21XKY220JpppM02
DE21XKY330JpppM02
DE21XKY470JpppM02
DE21XKY680JpppM02
DE2B3KY101KpppM02
DE2B3KY151KpppM02
DE2B3KY221KpppM02
DE2B3KY331KpppM02
DE2B3KY471KpppM02
DE2B3KY681KpppM02
DE2E3KY102MpppM02
DE2E3KY152MpppM02
DE2E3KY222MpppM02
DE2E3KY332MpppM02
DE2E3KY472MpppM02
DE2F3KY103MpppM02
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
SL
SL
SL
SL
SL
SL
B
10 ±5%
15 ±5%
8 max.
8 max.
8 max.
8 max.
8 max.
8 max.
7 max.
7 max.
7 max.
7 max.
7 max.
8 max.
7 max.
7 max.
8 max.
9 max.
10 max.
14 max.
7.5
5.0 max.
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
22 ±5%
33 ±5%
47 ±5%
68 ±5%
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±20%
1500 ±20%
2200 ±20%
3300 ±20%
4700 ±20%
10000 ±20%
B
B
B
B
B
E
E
E
E
E
F
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V".
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
Lead Spacing F=5mm
AC Rated
Voltage
(Vac)
Body
Dia. D
(mm)
Lead
Body
Lead
Lead
Lead
Temp.
Char.
Capacitance
(pF)
Part Number
Spacing F Thickness T Package
Package
Package
(mm)
(mm)
Long Bulk Short Bulk Taping (1)
DE21XKY100JpppM01
DE21XKY150JpppM01
DE21XKY220JpppM01
DE21XKY330JpppM01
DE21XKY470JpppM01
DE21XKY680JpppM01
DE2B3KY101KpppM01
DE2B3KY151KpppM01
DE2B3KY221KpppM01
DE2B3KY331KpppM01
DE2B3KY471KpppM01
DE2B3KY681KpppM01
DE2E3KY102MpppM01
DE2E3KY152MpppM01
DE2E3KY222MpppM01
DE2E3KY332MpppM01
DE2E3KY472MpppM01
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
SL
SL
SL
SL
SL
SL
B
10 ±5%
15 ±5%
8 max.
8 max.
8 max.
8 max.
8 max.
8 max.
7 max.
7 max.
7 max.
7 max.
7 max.
8 max.
7 max.
7 max.
8 max.
9 max.
10 max.
5.0
5.0 max.
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
5.0 max.
22 ±5%
33 ±5%
47 ±5%
68 ±5%
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±20%
1500 ±20%
2200 ±20%
3300 ±20%
4700 ±20%
B
B
B
B
B
E
E
E
E
E
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M01" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2000V".
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
5
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
Type KH (Basic Insulation) -IEC60384-14 Class X1, Y2-
2
D max.
T max.
■ Features
1. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
e
2. Dielectric strength: AC2600V
3. Class X1/Y2 capacitors which are certified by
F±1.0
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
NSW.
ød
4. Coated with flame-retardant epoxy resin (conforming
(in mm)
to UL94V-0 standard).
[Bulk]
Lead Code
Coating Extension e
Up to the end of crimp
ød
Vertical Crimp Long (A3)
5. Cost-saving automatic insertion available.
0.6±0.05
A3
■ Applications
Ideal for use as X/Y capacitors for AC line filter and
primary-secondary coupling on switching power supplies
and AC adapters.
D max.
T max.
e
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
ød
F±0.8
(in mm)
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Short (B3)
Up to the end of crimp
0.6±0.05
B3
■ Standard Certification
■ Marking
Item
Example
Standard No.
UL1414
Certified No.
Rated Voltage
q Type Designation
KH
UL
E37921
w Nominal Capacitance
(Marked with 3 figures)
CSA
E384-14
IEC 60384-14
EN 60384-14
1343805
VDE
40002796
e Capacitance Tolerance
r Company Name Code
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
w
BSI
KM 37901
8
15
: Made in Thailand
: Made in Taiwan
AC250V(r.m.s.)
t Manufactured Date Code
UL Approval Mark
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
812163
314578
24195
P08209182
08.0708
KH472M
X1Y2
BSI
e
q
IEC 60384-14
EN 60384-14
CSA Approval Mark
VDE Approval Mark
BSI Approval Mark
FI
8
r
MJ502
N
65
t
BSI
D
IEC 60384-14
AS3250
250~
SEMKO Approval Mark
DEMKO Approval Mark
FIMKO Approval Mark
NEMKO Approval Mark
ESTI Approval Mark
Class Code
NSW
6529
D
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
FI
N
MJ502
X1Y2
Rated Voltage Mark
250~
6
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
AC Rated
Voltage
(Vac)
Body
Dia. D
(mm)
Lead
Body
Lead
Lead
Lead
Temp.
Char.
Capacitance
(pF)
Part Number
Spacing F Thickness T Package
Package
Package
(mm)
(mm)
Long Bulk Short Bulk Taping (1)
DE2B3KH101Kppp
DE2B3KH151Kppp
DE2B3KH221Kppp
DE2B3KH331Kppp
DE2B3KH471Kppp
DE2B3KH681Kppp
DE2E3KH102Mppp
DE2E3KH152Mppp
DE2E3KH222Mppp
DE2E3KH332Mppp
DE2E3KH472Mppp
DE2F3KH103Mppp
250
250
250
250
250
250
250
250
250
250
250
250
B
B
B
B
B
B
E
E
E
E
E
F
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±20%
1500 ±20%
2200 ±20%
3300 ±20%
4700 ±20%
10000 ±20%
8 max.
8 max.
8 max.
8 max.
8 max.
9 max.
8 max.
9 max.
10 max.
12 max.
13 max.
16 max.
7.5
7.0 max.
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N7A
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
2
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KH) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
7
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1-
D max.
T max.
■ Features
1. We design capacitors in much more compact size than
current Type KX, having reduced the diameter
by 20% max.
3
e
2. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
F±1.0
3. Dielectric strength: AC4000V
ød
4. Class X1/Y1 capacitors which are certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
IMQ.
(in mm)
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Long (A4)
Up to the end of crimp
0.6±0.05
A4
5. Possible to use with a component in appliance
requiring reinforced insulation and double
insulation based on UL1492, IEC60065 and IEC60950.
6. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
D max.
T max.
7. Cost-saving automatic insertion available.
e
■ Applications
ød
1. Ideal for use as X/Y capacitors for AC line filter
and primary-secondary coupling on switching power
supplies and AC adapters.
F±0.8
(in mm)
2. Ideal for use on D-A isolation and noise absorption
for DAA modems without transformers.
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Short (B4)
Up to the end of crimp
0.6±0.05
B4
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
*: Small sized Type KX differs from current Type KX
in electrical characteristics, such as the voltage
dependency, of capacitance temperature dependecy,
and Dielectric strength.
Therefore, before replacing current Type KX,
please make a performance check by equipment.
Please refer below too.
[Notice(Rating)
item 2. "Performance Check by Equipment".]
8
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Certification
■ Marking
Example
Item
Standard No.
Certified No.
Rated Voltage
UL
UL1414
E37921
q Type Designation KX
CSA
E384-14
1343810
w Nominal Capacitance
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
(Marked with 3 figures)
VDE
BSI
40002831
KM 37901
e
r
w
q
472M
KX250~
X1 Y1
e Capacitance Tolerance
r Company Name Code
8
15
: Made in Thailand
: Made in Taiwan
AC250V(r.m.s.)
3
t
65
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
812158
314577
24191
P08209173
08.0707
V4069
8
t Manufactured Date Code
Class Code X1Y1
Rated Voltage Mark
IEC 60384-14
EN 60384-14
250~
IMQ
EN 60384-14
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
AC Rated
Voltage
(Vac)
Body
Dia. D
(mm)
Lead
Body
Lead
Lead
Lead
Package
Temp.
Char.
Capacitance
(pF)
Part Number
Spacing F Thickness T Package
Package
(mm)
(mm)
Long Bulk Short Bulk Taping (1)
DE1B3KX101KpppL01
DE1B3KX151KpppL01
DE1B3KX221KpppL01
DE1B3KX331KpppL01
DE1B3KX471KpppL01
DE1B3KX681KpppL01
DE1E3KX102MpppL01
DE1E3KX152MpppL01
DE1E3KX222MpppL01
DE1E3KX332MpppL01
DE1E3KX472MpppL01
250
250
250
250
250
250
250
250
250
250
250
B
B
B
B
B
B
E
E
E
E
E
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±20%
1500 ±20%
2200 ±20%
3300 ±20%
4700 ±20%
8 max.
8 max.
8 max.
8 max.
8 max.
9 max.
7 max.
8 max.
9 max.
10.0
7.0 max.
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
7.0 max.
10 max.
12 max.
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
9
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1-
D max.
T max.
■ Features
1. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).
e
2. Dielectric strength: AC4000V
3. Class X1/Y1 capacitors which are certified by
F±1.0
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/
4
IMQ.
ød
4. Possible to use with a component in appliance
(in mm)
requiring reinforced insulation and double
insulation based on UL1492, IEC60065 and IEC60950.
5. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Long (A5)
0.1
Up to the end of crimp
0.6±
0.05
A5
6. Cost-saving automatic insertion available.
D max.
T max.
■ Applications
Ideal for use as X/Y capacitors for AC line filter and
primary-secondary coupling on switching power supplies
and AC adapters.
e
ød
F±0.8
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
(in mm)
[Bulk]
Lead Code
Coating Extension e
ød
0.1
Vertical Crimp Short (B5)
Up to the end of crimp
0.6±
0.05
B5
■ Standard Certification
■ Marking
Item
Example
Standard No.
UL1414
E384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
Certified No.
Rated Voltage
q Type Designation
KX
UL
CSA
E37921
1343810
w Nominal Capacitance
(Under 100pF: Actual value, 100pF and over: Marked with 3 figures)
VDE
BSI
40002831
KM 37901
e Capacitance Tolerance
r Company Name Code
w
8
15
: Made in Thailand
: Made in Taiwan
t Manufactured Date Code
UL Approval Mark
AC250V(r.m.s.)
KX222M
X1Y1
BSI
e
q
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
812158
314577
24191
P08209173
08.0707
V4069
CSA Approval Mark
VDE Approval Mark
BSI Approval Mark
SEMKO Approval Mark
DEMKO Approval Mark
FIMKO Approval Mark
NEMKO Approval Mark
ESTI Approval Mark
IMQ Approval Mark
Class Code
IEC 60384-14
EN 60384-14
FI
MJ502
N
D
BSI
8
r
65
t
250~
IMQ
EN 60384-14
D
FI
• The certification number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
N
MJ502
X1Y1
250~
Rated Voltage Mark
10
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
AC Rated
Voltage
(Vac)
Body
Dia. D
(mm)
Lead
Body
Lead
Lead
Lead
Temp.
Char.
Capacitance
(pF)
Part Number
Spacing F Thickness T Package
Package
Package
(mm)
(mm)
Long Bulk Short Bulk Taping (1)
DE11XKX100Jppp
DE11XKX150Jppp
DE11XKX220Jppp
DE11XKX330Jppp
DE11XKX470Jppp
DE11XKX680Jppp
DE1B3KX101Kppp
DE1B3KX151Kppp
DE1B3KX221Kppp
DE1B3KX331Kppp
DE1B3KX471Kppp
DE1B3KX681Kppp
DE1E3KX102MpppA01
DE1E3KX152MpppA01
DE1E3KX222MpppA01
DE1E3KX332MpppA01
DE1E3KX392MpppA01
DE1E3KX472MpppA01
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
SL
SL
SL
SL
SL
SL
B
10 ±5%
15 ±5%
9 max.
9 max.
9 max.
9 max.
9 max.
9 max.
9 max.
9 max.
9 max.
9 max.
9 max.
10 max.
8 max.
9 max.
10 max.
12 max.
13 max.
15 max.
10.0
8.0 max.
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
A5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
B5B
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
N5A
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
8.0 max.
22 ±5%
33 ±5%
47 ±5%
68 ±5%
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±20%
1500 ±20%
2200 ±20%
3300 ±20%
3900 ±20%
4700 ±20%
B
B
B
B
4
B
E
E
E
E
E
E
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.
11
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
TypeKY/KH/KXSpecificationsand Test Methods
Apply to Type KY/KH/KX
Operating Temperature Range: -25 to +125°C (-25 to +85°C in case of the standard of UL)
Specifications
No.
1
Item
Test Method
The capacitor should be visually inspected for evidence of
defect.
No marked defect on appearance form and
dimensions are within specified range.
Appearance and Dimensions
Dimensions should be measured with slide calipers.
2
3
Marking
To be easily legible
The capacitor should be visually inspected.
Capacitance
Within specified tolerance
Char.
B, E
F
Specifications
D.F.V2.5%
The capacitance, dissipation factor and Q should be measured
at 20˚C with 1±0.1kHz (char. SL: 1±0.1MHz) and AC5V(r.m.s.)
max.
Dissipation Factor (D.F.)
Q
4
D.F.V5.0%
4
5
1
*
QU400+20C (CF30pF)
SL
QU1000
(CU30pF)
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
Insulation Resistance (I.R.)
10000MΩ min.
The capacitor should not be damaged when test voltages of
Table 1 are applied between the lead wires for 60 sec.
<Table 1>
Type
Test Voltage
In case of lead spacing F=5mm AC2000V(r.m.s.)
In case of lead spacing F=7.5mm AC2600V(r.m.s.)
AC2600V(r.m.s.)
Between Lead
Wires
No failure
KY
KH
KX
AC4000V(r.m.s.)
First, the terminals of the capacitor
should be connected together. Then,
as shown in figure at right, a metal
foil should be closely wrapped around
the body of the capacitor to the
distance of about 3 to 4mm from
each terminal.
Then, the capacitor should be inserted
into a container filled with metal balls
of about 1mm diameter. Finally, AC
Dielectric
Strength
6
Metal
Foil
about
3 to 4mm
Metal
Balls
Body
Insulation
No failure
voltage of Table 2 is applied for 60 sec. between the capacitor
lead wires and metal balls.
<Table 2>
Type
KY
KH
Test Voltage
AC2600V(r.m.s.)
AC2600V(r.m.s.)
AC4000V(r.m.s.)
KX
The capacitance measurement should be made at each step
specified in Table 3.
Char.
Capacitance Change
B
E
F
Within ±10%
+20
<Table 3>
Within
Within
%
%
-55
+30
-80
Step
Temperature (ºC)
20±2
1
2
3
4
5
7
Temperature Characteristics
(Temp. range: -25 to +85°C)
-25±2
20±2
85±2
20±2
Char.
SL
Temperature Coefficient
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5 sec.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the circumferential
direction.
8
Solderability of Leads
*1 "C" expresses nominal capacitance value (pF).
Continued on the following page.
12
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KY/KH/KX Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Test Method
As shown in figure, the lead wires
should be immersed in solder of
350±10°C or 260±5°C up to 1.5
to 2.0mm from the root of terminal
for 3.5±0.5 sec. (10±1 sec. for
260±5°C).
Appearance
No marked defect
Within ±10%
Capacitor
1.5
Thermal
Screen
Capacitance
Change
to 2.0mm
I.R.
1000MΩ min.
Soldering
Effect
Molten
Solder
9
Pre-treatment:
(Non-Preheat)
Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*2 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
Dielectric
Strength
Per Item 6
4
Appearance
No marked defect
Within ±10%
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
Capacitor
Thermal
Screen
Capacitance
Change
1.5
to 2.0mm
I.R.
1000MΩ min.
Molten
Solder
Soldering
10 Effect
(On-Preheat)
Pre-treatment:
Dielectric
Strength
Per Item 6
Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*2 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
Appearance
Capacitance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz.
Apply for a total of 6 hrs., 2 hrs. each in 3 mutually
perpendicular directions.
Within the specified tolerance
Vibration
Resistance
Char.
B, E
F
Specifications
D.F.V2.5%
11
D.F.
Q
D.F.V5.0%
1
*
QU400+20C (CF30pF)
SL
QU1000
(CU30pF)
Appearance
No marked defect
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Capacitance
Change
Within ±15%
Within ± 5%
Humidity
(Under
Steady
State)
Set the capacitor for 500±12 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
Char.
B, E
F
Specifications
D.F.V5.0%
12
D.F.
Q
D.F.V7.5%
1
*
QU275+5/2C (CF30pF)
SL
QU350
(CU30pF)
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Capacitance
Change
Within ±15%
Within ± 5%
Apply the rated voltage for 500±12 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
Char.
B, E
F
Specifications
D.F.V5.0%
Humidity
Loading
13
D.F.
Q
D.F.V7.5%
1
*
QU275+5/2C (CF30pF)
SL
QU350
(CU30pF)
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
*1 "C" expresses nominal capacitance value (pF).
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
13
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
TypeKY/KH/KXSpecificationsand Test Methods
Continued from the preceding page.
Specifications
No.
Item
Appearance
Test Method
No marked defect
Within ±20%
Impulse Voltage
Each individual capacitor should be subjected to a 5kV (Type
KX: 8kV) impulses for three times. After the capacitors are
applied to life test.
Capacitance
Change
I.R.
3000MΩ min.
100 (%)
Front time (T1) =1.2µs=1.67T
Time to half-value (T2) =50µs
90
50
30
0
t
T
T
1
14 Life
4
T
2
Apply a voltage of Table 4 for 1000 hrs. at 125+2/-0°C, and
relative humidity of 50% max.
Dielectric
Strength
Per Item 6
<Table 4>
Applied Voltage
AC425V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1 sec.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*2.
The capacitor should be subjected to applied flame for 15 sec.
and then removed for 15 sec. until 5 cycles are completed.
The capacitor flame discontinues as follows.
Capacitor
Flame
Cycle
1 to 4
5
Time (sec.)
30 max.
60 max.
15 Flame Test
Gas Burner: Inside Dia. 9.5
(in mm)
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
Tensile
direction of the capacitor up to 10N and keep
it for 10±1 sec.
Robustness
16 of
W
Lead wire should not be cut off. Capacitor should
not be broken.
Terminations
Each lead wire should be subjected to 5N weight and then a
90° bend, at the point of egress, in one direction, return to
original position, and then apply a 90° bend in the opposite
direction at the rate of one bend in 2 to 3 sec.
Bending
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. after the last discharge.
R
F
L1
L2
S1
C1
C2
L3
C3
L4
Cx
Ct
Ut
S2 UAC
Tr
Oscilloscope
17 Active Flammability
The cheese-cloth should not be on fire.
C1,2 : 1µF±10%
C3
: 0.033µF±5% 10kV
L1 to 4 : 1.5mH±20% 16A Rod core choke
Ct
Cx
F
: 3µF±5% 10kV
: Capacitor under test
: Fuse, Rated 10A
R
: 100Ω±2%
: UR±5%
: Rated Voltage
: Voltage applied to Ct
UAC
UR
Ut
Ux
5kV
time
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
14
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KY/KH/KX Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Test Method
The capacitor under test should be held in the flame in the
position which best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30 sec.
Length of flame: 12±1mm
Gas burner
: Length 35mm min.
Inside Dia. 0.5±0.1mm
Outside Dia. 0.9mm max.
: Butane gas Purity 95% min.
The burning time should not exceed 30 sec.
The tissue paper should not ignite.
Gas
18 Passive Flammability
Test Specimen
4
45°
Tissue
About 10mm Thick Board
Appearance
No marked defect
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Char.
B
E, F
SL
Capacitance Change
Within ±10%
<Temperature Cycle>
Capacitance
Change
Within ±20%
Within ± 5%
Step
Temperature (ºC)
-25+0/-3
Room temp.
125+3/-0
Time (min)
1
2
3
4
30
3
30
3
Char.
B, E
F
Specifications
D.F.V5.0%
Room temp.
D.F.
Q
Cycle time: 5 cycle
D.F.V7.5%
1
*
Temperature
and
Immersion
Cycle
QU275+5/2C (CF30pF)
SL
<Immersion Cycle>
QU350
(CU30pF)
19
Time
(min)
Immersion
Water
Step
Temperature (ºC)
I.R.
3000MΩ min.
Clean
water
Salt
1
2
65+5/-0
0±3
15
15
water
Cycle time: 2 cycle
Dielectric
Strength
Per Item 6
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*2 for 24±2 hrs.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*2.
*1 "C" expresses nominal capacitance value (pF).
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
15
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan-
<Fig. 1>
T max.
<Fig. 2>
D max.
T max.
■ Features
1. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
e
2. Cost-saving automatic insertion available.
3. This type is based on the electrical appliance and
material safety law of Japan (separated table 4).
F±1.0
ø d
(in mm)
■ Applications
Lead Code Coating Extension e
ø d
Style
Ideal for use on AC line filter and primary-secondary
[Bulk]
Up to the end of crimp 0.6±0.05 Fig. 1
A3
C3
Vertical Crimp Long (A3)
Straight Long (C3)
5
coupling for switching power supplies and AC adapters.
3.0 max.
0.6±0.05 Fig. 2
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
e
ø d
F±0.8
■ Marking
(in mm)
Lead Code Coating Extension e
ø d
Style
Temp. Char.
E, F
[Bulk]
Up to the end of crimp 0.6±0.05 Fig. 1
B3
D3
Vertical Crimp Short (B3)
Straight Short (D3)
3.0 max.
0.6±0.05 Fig. 2
102Z
250~
65
ø7-8mm
332Z
250~
65
ø9-11mm
Marked with 3 figures
Marked with code
Marked with code
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Marked with
Manufacturer's
Identification
(omitted for nominal body diameter ø8mm and under)
Abbreviation
Manufactured Date Code
AC Rated
Body
Lead
Body
Lead
Lead
Package
Lead
Package
Lead
Temp.
Char.
Capacitance
(pF)
Part Number
Voltage
Dia. D Spacing F Thickness T Package
Package
(Vac)
(mm)
(mm)
(mm)
Long Bulk Short Bulk Taping (1) Taping (2)
DEJE3E2102Zppp
DEJE3E2222Zppp
DEJE3E2332Zppp
DEJE3E2472Zppp
DEJF3E2472Zppp
DEJF3E2103Zppp
250
E
E
E
E
F
F
1000 +80/-20% 7 max.
2200 +80/-20% 8 max.
3300 +80/-20% 9 max.
4700 +80/-20% 11 max.
4700 +80/-20% 8 max.
10000 +80/-20% 11 max.
7.5
4.0 max.
C3B
A3B
A3B
A3B
A3B
A3B
D3B
B3B
B3B
B3B
B3B
B3B
N2A
N2A
N2A
N2A
N2A
N2A
P3A
N3A
N3A
N3A
N3A
N3A
250
250
250
250
250
7.5
7.5
7.5
7.5
7.5
4.0 max.
4.0 max.
4.0 max.
4.0 max.
4.0 max.
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Taping (1): Lead spacing F=5.0mm, Taping (2): Lead spacing F=7.5mm.
16
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
! Apply to DEJ Series (Products which are based on the electrical appliance and material safety law of Japan)
Operating Temperature Range: -25 to +85°C
Specifications
No.
Item
Test Method
The capacitor should be visually inspected for evidence of
defect.
No marked defect on appearance form and
dimensions are within specified range.
1
Appearance and Dimensions
Dimensions should be measured with slide calipers.
2
3
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitance should be measured at 20˚C with 1±0.1kHz
and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
Char.
E
F
Specifications
D.F.V2.5%
D.F.V5.0%
Dissipation Factor
(D.F.)
The dissipation factor should be measured at 20˚C with
1±0.1kHz and AC5V(r.m.s.) max.
4
5
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
Insulation Resistance (I.R.)
10000MΩ min.
5
Between Lead
Wires
The capacitor should not be damaged when AC1500V(r.m.s.)
are applied between the lead wires for 60 sec.
No failure
First, the terminals of the capacitor should be connected
together. Then, as shown in figure at right,
the capacitor should be immersed
Dielectric
Strength
6
into 10% salt solution up to a position
Body
Insulation
About
of about 3 to 4mm apart from the
3 to 4mm
No failure
terminals.
Electrode
Plate
10% Salt Solution
Finally, AC1500V(r.m.s.) is applied
for 60 sec. between the capacitor lead
wires and electrode plate.
The capacitance measurement should be made at each step
specified in Table 1.
<Table 1>
Char.
E
F
Capacitance Change
Step
Temperature (ºC)
20±2
+20
Within
Within
%
%
1
2
3
4
5
-55
+30
-80
7
Temperature Characteristics
-25±2
20±2
85±2
20±2
As in Figure 1, discharge is made 50 times at 5 sec. intervals
from the capacitor (Cd) charged at DC voltage of specified.
Appearance
I.R.
No marked defect
1000MΩ min.
R3
S
R1
Vs
Ct
R2
Cd
Discharge
Test
8
Fig.1
R2: 100MΩ
Dielectric
Strength
Per Item 6
Ct: Capacitor under test
S: High-voltage switch
R1: 1000Ω
R3: Surge resistance
Cd
Vs
0.001µF
DC10kV
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5 sec.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the circumferential
direction.
9
Solderability of Leads
Continued on the following page.
17
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Appearance
Test Method
No marked defect
As shown in figure, the lead wires
Capacitor
1.5
Thermal
Screen
should be immersed in solder of
350±10˚C up to 1.5 to 2.0mm from
the root of terminal for 3.5±0.5 sec.
Pre-treatment:
I.R.
1000MΩ min.
to 2.0mm
Molten
Solder
Soldering
10 Effect
(Non-Preheat)
Capacitor should be stored at
85±2˚C for 1 hr., then placed at room condition*1 for 24±2 hrs.
before initial measurements.
Dielectric
Strength
Per Item 6
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
Appearance
I.R.
No marked defect
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Capacitor
1.5
Thermal
Screen
1000MΩ min.
to 2.0mm
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
Molten
Solder
5
Soldering
11 Effect
Dielectric
Strength
(On-Preheat)
Per Item 6
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
Appearance
Capacitance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz.
Within the specified tolerance
Vibration
Resistance
12
13
Char.
Specifications
D.F.
D.F.V2.5%
D.F.V5.0%
E
F
Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular
directions.
Solvent
Resistance
The capacitor should be immersed into a isopropyl alcohol for
30±5 sec.
Appearance
Appearance
No marked defect
No marked defect
Char.
E
F
Capacitance Change
Within ±20%
Capacitance
Change
Set the capacitor for 500±12 hrs. at 40±2˚C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Within ±30%
Humidity
(Under
Steady
State)
14
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
D.F.
I.R.
1000MΩ min.
Per Item 6
Dielectric
Strength
Appearance
No marked defect
Char.
E
F
Capacitance Change
Within ±20%
Capacitance
Change
The capacitor should be subjected to 40±2˚C, relative humidity
of 90 to 98% for 8 hrs., and then removed in room temperature
for 16 hrs. until 5 cycles.
Within ±30%
Humidity
Insulation
Pre-treatment:
15
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
D.F.
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
18
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Test Method
Appearance
No marked defect
Char.
E
F
Capacitance Change
Within ±20%
Capacitance
Change
Apply the rated voltage for 500±12 hrs. at 40±2˚C in 90 to 95%
relative humidity.
Within ±30%
Pre-treatment:
Humidity
Loading
16
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
D.F.
I.R.
1000MΩ min.
Per Item 6
Dielectric
Strength
Appearance
No marked defect
Apply a voltage of Table 2 for 1500 hrs. at 85±2˚C, relative
humidity 50% max.
5
Char.
E
F
Capacitance Change
Within ±20%
<Table 2>
Capacitance
Change
Applied Voltage
AC500V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1 sec.
Within ±30%
17 Life
I.R.
1000MΩ min.
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at room condition*1.
Dielectric
Strength
Per Item 6
The capacitor should be subjected
The capacitor flame discontinued as follows.
to applied flame for 15 sec. and then
removed for 15 sec. until 3 cycles
are completed.
Capacitor
Flame
Cycle
1 to 2
3
Time (sec.)
15 max.
60 max.
18 Flame Test
Gas Burner: Inside Dia. 9.5
(in mm)
As shown in figure at right, fix the body of
capacitor, apply a tensile weight gradually to
each lead wire in the radial direction of capacitor
up to 10N and keep it for 10±1 sec.
Tensile
W
Robustness
19 of
Lead wire should not be cut off. Capacitor should
not be broken.
Terminations
Each lead wire should be subjected to 5N weight and then a
90° bend, at the point of egress, in one direction, return to
original position, and then apply a 90° bend in the opposite
direction at the rate of one bend in 2 to 3 sec.
Bending
Appearance
No marked defect
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Char.
E
F
Capacitance Change
Within ±20%
Capacitance
Change
<Temperature Cycle>
Step
Temperature (ºC)
-25+0/-3
Room temp.
85+3/-0
Time (min)
Within ±30%
1
2
3
4
30
3
30
3
Char.
E
F
Specifications
D.F.V5.0%
D.F.V7.5%
D.F.
I.R.
Room temp.
Cycle time: 5 cycle
Temperature
1000MΩ min.
<Immersion Cycle>
and
Immersion
Cycle
20
Time
Immersion
Water
Step
Temperature (ºC)
(min)
Clean
water
Salt
1
2
65+5/-0
0±3
15
15
Dielectric
Strength
water
Per Item 6
Cycle time: 2 cycle
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
room condition*1 for 24±2 hrs.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at room condition*1.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
19
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
■ Capacitance - Temperature Characteristics
40
20
SL
0
B
B
SL
-20
-40
E
-60
F
E
-80
F
-100
-40 -20
0
20
40
60
80 100 120 140
Temperature (°C)
5
■ Insertion Loss - Frequency Characteristics
Type KY
Type KH
0
0
10
20
30
40
50
Type KY
Type KH
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
10
20
30
40
50
(1) DE2B3KY101KA2BM01
(2) DE2B3KY221KA2BM01
(3) DE2B3KY471KA2BM01
(4) DE2E3KY102MA2BM01
(5) DE2E3KY222MA2BM01
(6) DE2E3KY472MA2BM01
(7) DE2F3KY103MA3BM02
(1) DE2B3KH101KA3B
(2) DE2B3KH221KA3B
(3) DE2B3KH471KA3B
(4) DE2E3KH102MA3B
(5) DE2E3KH222MA3B
(6) DE2E3KH472MA3B
(7) DE2F3KH103MA3B
(1)
(2)
(1)
(3)
(4)
(2)
(5)
(3)
(4)
(6)
(5)
(6)
(7)
(7)
10
1
10
100
1000
1
100
1000
Frequency (MHz)
Frequency (MHz)
Type KX Small Size
Type KX
0
10
20
30
40
50
0
10
20
30
40
Type KX Small Size
Type KX
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
(1) DE1B3KX101KA4BL01
(2) DE1B3KX221KA4BL01
(3) DE1B3KX471KA4BL01
(4) DE1E3KX102MA4BL01
(5) DE1E3KX222MA4BL01
(6) DE1E3KX472MA4BL01
(1) DE1B3KX101KA5B
(2) DE1B3KX221KA5B
(3) DE1B3KX471KA5B
(4) DE1E3KX102MA5BA01
(5) DE1E3KX222MA5BA01
(6) DE1E3KX472MA5BA01
(1)
(2)
(3)
(1)
(2)
(4)
(5)
(3)
(6)
(4)
(5)
(6)
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
20
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
■ Leakage Current Characteristics
Type KY (B char.)
Type KY (E,F char.)
AC voltage : 60Hz
AC voltage : 60Hz
Temperature : 25°C
Temperature : 25°C
6.0
5.0
4.0
3.0
2.0
1.0
0.0
1.0
0.8
0.6
0.4
0.2
0.0
5
0
1000
2000
3000
3000
4000
0
1000
2000
3000
3000
4000
AC voltage [V(r.m.s.)]
AC voltage [V(r.m.s.)]
Type KH (B char.)
Type KH (E, F char.)
AC voltage : 60Hz
Temperature : 25°C
AC voltage : 60Hz
Temperature : 25°C
1.0
0.8
0.6
0.4
0.2
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
B
3
A
M
3
0
1
H
K
3
F
2
E
D
0
1000
2000
0
1000
2000
AC voltage [V(r.m.s.)]
AC voltage [V(r.m.s.)]
Type KX Small Size (B char.)
Type KX Small Size (E char.)
AC voltage : 60Hz
Temperature : 25°C
AC voltage : 60Hz
Temperature : 25°C
1.0
0.8
0.6
0.4
0.2
0.0
4.0
3.0
2.0
1.0
0.0
0
1000
2000
AC voltage [V(r.m.s.)]
3000
0
1000
2000
AC voltage [V(r.m.s.)]
3000
Continued on the following page.
21
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
Continued from the preceding page.
Type KX (B char.)
Type KX (E char.)
AC voltage : 60Hz
AC voltage : 60Hz
Temperature : 25°C
Temperature : 25°C
1.2
1.0
0.8
0.6
0.4
0.2
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
1
0
A
B
5
A
M
2
7
4
X
K
3
E
1
E
D
5
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
22
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Packaging
Taping Specifications
12.7mm pitch / lead spacing 5mm taping
15mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N2)
∆S
Vertical crimp type
(Lead Code: N3)
∆S
D
P2
P
P2
P
D
ød
ød
P1
P1
F
F
øD0
øD0
R
P0
R
P0
30mm pitch / lead spacing 7.5mm taping
Vertical crimp type
15mm pitch / lead spacing 7.5mm taping
Straight type
(Lead Code: N7)
(Lead Code: P3)
∆S
5
P2
P
D
P2
∆S
P
D
ød
P1
F
ød
P1
F
øD0
R
P0
øD0
P0
R
25.4mm pitch / lead spacing 10.0mm taping
Vertical crimp type
O
∆h1
∆h2
(Lead Code: N4, N5)
T max.
3.0 max.
H0
4.0 max.
H0
Marked side
P
∆S
D
Lead Code
N2, N3, N4, N7
Lead Code
P3
Lead Code
N5
P1
ød
F
t2
t1
øD0
P0
R
N5
Item
Code
N2
N3
P3
N7
N4
P
P0
F
12.7
15.0
15.0
30.0
25.4
12.7±0.3
10.0±1.0
—
Pitch of component
Pitch of sprocket hole
Lead spacing
12.7±0.3
15.0±0.3
7.5±1.0
7.5±1.5
3.75±1.0
15.0±0.3
7.5±1.0
7.5±1.5
3.75±1.0
15.0±0.3
7.5±1.0
7.5±1.5
3.75±1.0
+0.8
–0.2
5.0
P2
P1
D
6.35±1.3
3.85±0.7
Length from hole center to component center
Length from hole center to lead
Body diameter
7.7±1.5
See the individual product specifications.
∆S
W
0±1.0
0±2.0
18.0±0.5
Deviation along tape, left or right
Carrier tape width
W1
H0
H
9.0±0.5
Position of sprocket hole
Lead distance between reference
and bottom planes
+2.0
–0
+2.0
–
18.0
18.0
–0
+1.5
–1.0
–
–
20.0
r
øD0
ød
t1
+0.5 to -1.0
Protrusion length
4.0±0.1
Diameter of sprocket hole
Lead diameter
+0.1
–0.05
0.6
0.6±0.05
0.6±0.3
1.5 max.
Total tape thickness
t2
Total thickness, tape and lead wire
Body thickness
T
See the individual product specifications.
+0
L
11.0
Portion to cut in case of defect
Hold down tape width
–1.0
W0
W2
e
11.5 min.
1.5±1.5
Hold down tape position
Coating extension on lead
Deviation across tape, front
Deviation across tape, rear
Up to the end of crimp
1.0 max.
3.0 max.
Up to the end of crimp
2.0 max.
∆h1
∆h2
(in mm)
Continued on the following page.
23
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Packaging
Continued from the preceding page.
Packaging Styles
Bulk
Taping
Polyethylene Bag
Ammo Pack
5
Minimum Quantity (Order in Sets Only)
[Bulk] 1,000 pcs.
[Taping]
(pcs.)
DEJ Series
Lead Code
N2
Type KY
Type KH
Type KX
1,000
900
–
–
–
–
1,500
1,000
–
N3, P3
N7
900
400
–
–
N4, N5
–
500
–
Minimum Order Quantity
[Bulk] 3,000 pcs.
(pcs.)
[Taping]
Lead Code
N2
Type KY
3,000
2,700
–
Type KH
–
Type KX
DEJ Series
–
–
3,000
3,000
–
N3, P3
N7
2,700
2,000
–
–
N4, N5
–
2,000
–
“Minimum Quantity” means the numbers of units of each delivery or order.
The quantity should be an integral multiple of the “minimum quantity”.
(In case of bulk packaging, minimum quantities differ from packing quantities in a
bulk bag.)
24
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors !Caution
■ !Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to
use a capacitor with a rated voltage range that includes
these irregular voltages.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
5
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature and Self-generated Heat
(Apply to B/E/F Char.)
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected to an atmosphere temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's characteristics
and reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
3. Test Condition for Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.
25
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors !Caution
Continued from the preceding page.
(2) Voltage Applied Method
When the withstanding voltage is applied, capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero voltage
would be applied directly to capacitor, test voltage should
be applied with the zero cross*. At the end of the test
time, the test voltage should be reduced to near zero,
and then capacitor's lead or terminal should be taken off
the output of the withstanding voltage test equipment.
If the test voltage without the raise from near zero voltage
would be applied directly to capacitor, the surge voltage
may arise, and therefore, a defect may be caused.
5
Voltage sine wave
zero cross
0V
*ZERO CROSS is the point where voltage sine wave
passes 0V. See figure at right.
4. Fail-Safe
When capacitor is broken, failure may result in a short
circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fuming.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
26
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors !Caution
■ !Caution (Storage and Operating Condition)
Operating and Storage Environment
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to
moisture. Before cleaning, bonding, or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
Use capacitors within 6 months after delivery.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
5
■ !Caution (Soldering and Mounting)
1. Vibration and Impact
the bonded, molded or coated product in the
intended equipment.
Do not expose a capacitor or its leads to
excessive shock or vibration during use.
2. Soldering
In case the amount of applications,
dryness/hardening conditions of adhesives and
molding resins containing organic solvents
(ethyl acetate, methyl ethyl ketone, toluene, etc.)
are unsuitable, the outer coating resin of a
capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding
resin or coating may cause outer coating resin
cracking and/or ceramic element cracking of a
capacitor in a temperature cycling.
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specifications of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
When soldering capacitor with a soldering iron, it
should be performed in the following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
3. Bonding, Resin Molding and Coating
Before bonding, molding or coating this product,
verify that these processes do not affect the
quality of capacitor by testing the performance of
■ !Caution (Handling)
Vibration and Impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
27
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Notice
■ Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
■ Notice (Rating)
1. Capacitance Change of Capacitors
2. Performance Check by Equipment
5
(1) In case of SL char.
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Capacitance might change a little depending on a
surrounding temperature or an applied voltage.
Please contact us if you use for the strict
constant time circuit.
Generally speaking, CLASS 2 (B/E/F char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance. So, the capacitance value may change
depending on the operating condition in the
equipment. Therefore, be sure to confirm the
apparatus performance of receiving influence in
the capacitance value change of a capacitor,
such as leakage current and noise suppression
characteristic.
(2) In case of B/E/F char.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
change greatly depending on the surrounding
temperature or an applied voltage. So, it is not
likely to be suitable for use in a constant time
circuit.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
Please contact us if you need detailed information.
28
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
DES Series (125 deg. C Guaranteed/Low-dissipation Factor/DC500V-1kV)
D max.
T max.
■ Features
1. Low dissipation factor series which can be used for
power supplies with an increased switching
frequency.
e
2. The allowable power in the 100 to 300kHz band is
improved to approximately one-and-a-half times
that of DEH series while remaining the same size.
3. Operating temperature range is guaranteed up to 125
degrees C.
F±1.0
ø d
(in mm)
Lead Code
A2, A3
Coating Extension e
Up to the end of crimp
ø d
0.6±0.05
[Bulk]
Vertical Crimp Long (A2,A3)
4. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
5. Taping available for automatic insertion.
D max.
T max.
6
■ Applications
Ideal for use on high frequency pulse circuits such as
snubber circuits for switching power supplies.
e
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
ø d
F±0.8
(in mm)
Lead Code
Coating Extension e
ø d
[Bulk]
Up to the end of crimp
0.6±0.05
J2, J3
Vertical Crimp Short (J2,J3)
■ Marking
Rated Voltage
DC500V
DC1kV
Nominal Body Diameter
S D
101
66
S D
101
1KV 66
ø6mm
S D
471K
1KV 66
S D
102K
66
ø7-9mm
S D
152K
1KV
66
S D
222K
66
ø10-17mm
Abbreviation (S)
Marked with code
Marked with 3 figures
Series Code
Temperature Characteristic
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Marked with code (omitted for nominal body diameter ø6mm)
Marked with code (omitted for DC500V)
Marked with
Abbreviation
(omitted for nominal body diameter ø9mm and under)
Manufacturer's Identification
Manufactured Date Code
29
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
D Characteristics
DC Rated
Voltage
(V)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DESD32H101Kppp
DESD32H151Kppp
DESD32H221Kppp
DESD32H331Kppp
DESD32H471Kppp
DESD32H681Kppp
DESD32H102Kppp
DESD32H152Kppp
DESD32H222Kppp
DESD32H332Kppp
DESD32H472Kppp
DESD33A101Kppp
DESD33A151Kppp
DESD33A221Kppp
DESD33A331Kppp
DESD33A471Kppp
DESD33A681Kppp
DESD33A102Kppp
DESD33A152Kppp
DESD33A222Kppp
DESD33A332Kppp
DESD33A472Kppp
500
500
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
6
6
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
A3B
J2B
J2B
J2B
J2B
J2B
J2B
J2B
J2B
J2B
J3B
J3B
J2B
J2B
J2B
J2B
J2B
J2B
J2B
J2B
J3B
J3B
J3B
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N3A
N7A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N3A
N7A
N7A
500
6
500
6
500
6
500
6
500
8
500
9
500
10
12
14
6
500
500
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
6
6
6
6
7
8
9
10
12
14
17
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
30
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DES Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +125°C
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage (DC1kV) or DC voltage of 250% of
the rated voltage (DC500V) is applied between the lead wires
for 1 to 5 sec.
Between Lead
Wires
No failure
(Charge/Discharge currentV50mA)
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
right, and AC1250V(r.m.s.) <50/60Hz> is
applied for 1 to 5 sec. between capacitor
Metal balls
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Insulation
Resistance (I.R.) Wires
Between Lead
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
5
6
7
10000MΩ min.
6
The capacitance should be measured at 20°C with 1±0.2kHz
and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
0.3% max.
The dissipation factor should be measured at 20°C with
1±0.2kHz and AC5V(r.m.s.) max.
Dissipation Factor (D.F.)
The capacitance measurement should be made at each step
specified in Table.
Within +20/-30%
(Temp. range: -25 to +125°C)
8
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at
room condition* for 24±2 hrs. before measurements.
Step
1
2
3
4
5
Temp. (°C)
20±2
-25±3
20±2
125±2
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
Appearance
No marked defect
Vibration
Resistance
Capacitance
D.F.
Within specified tolerance
10
0.3% max.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
11 Solderability of Leads
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
3.5±0.5 sec.
Appearance
No marked defect
Within ±10%
Capacitance
Change
Soldering Effect
(Non-Preheat)
Pre-treatment:
12
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Capacitor should be stored for 24±2 hrs. at room condition*.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
31
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DES Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
First the capacitor should be
Capacitor
1.5
Thermal
Screen
stored at 120+0/-5°C for
60+0/-5 sec.
Capacitance
Change
Within ±10%
Per item 4.
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
to 2.0mm
Molten
Solder
Soldering Effect
(On-Preheat)
13
Dielectric Strength
(Between Lead
Wires)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*.
Appearance
No marked defect
Within ±10%
The capacitor should be subjected to 5 temperature cycles.
<Temperature Cycle>
Capacitance
Change
Step Temperature (°C) Time (min)
1
2
3
4
-25±3
Room Temp.
125±3
30
3
30
3
D.F.
I.R.
0.4% max.
1000MΩ min.
Temperature
Cycle
14
Room Temp.
Cycle time: 5 cycle
6
Pre-treatment:
Dielectric Strength
(Between Lead
Wires)
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Per item 4.
Capacitor should be stored for 24±2 hrs. at room condition*.
Appearance
No marked defect
Within ±10%
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitance
Change
Humidity (Under
Steady State)
15
D.F.
0.4% max.
I.R.
1000MΩ min.
No marked defect
Capacitor should be stored for 1 to 2 hrs. at room condition*.
Appearance
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitance
Change
Within ±10%
Humidity
Loading
16
D.F.
0.6% max.
I.R.
1000MΩ min.
No marked defect
Capacitor should be stored for 1 to 2 hrs. at room condition*.
Apply a DC voltage of 200% of the rated voltage (DC500V) or
DC voltage of 150% of the rated voltage (DC1kV) for 1000
+48/-0 hrs. at 125±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA)
Appearance
Capacitance
Change
Within ±10%
0.4% max.
D.F.
Pre-treatment:
17 Life
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
I.R.
2000MΩ min.
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition* for 24±2 hrs.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
32
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
DEH Series (125 deg. C Guaranteed/Low-dissipation Factor/DC250V-3.15kV)
<Fig. 1>
T max.
<Fig. 2>
D max.
T max.
■ Features
1. Reduced heat dissipation permitted due to small
dielectric loss of the ceramic material.
2. Operating temperature range is guaranteed up to 125
degrees C.
e
3. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
4. Taping available for automatic insertion.
F±1.0
ø d
(in mm)
Lead Code Coating Extension e
ø d
Style
[Bulk]
Up to the end of crimp 0.6±0.05 Fig. 1
A2, A3, A4
C3
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
■ Applications
3.0 max.
0.6±0.05 Fig. 2
Ideal for use on high frequency pulse circuits such as
a horizontal resonance circuit for CTV and snubber
circuits for switching power supplies.
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
e
7
ø d
F±0.8
(in mm)
Lead Code Coating Extension e
ø d
Style
[Bulk]
Up to the end of crimp 0.6±0.05 Fig. 1
B2, B3, B4
D3
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
3.0 max.
0.6±0.05 Fig. 2
■ Marking
Rated Voltage
Temp. Char.
DC250V
DC500V
C
DC1-3.15kV
Nominal
Body Diameter
R
R
HR
102
66
HR
471
66
ø6mm
HR R
332K
250V
66
HR R
102K
1KV 66
HR C
152K
66
ø7-9mm
HR R
103K
250V
66
HR R
272K
3KV
66
HR C
472K
66
ø10-21mm
HR
High Temperature Guaranteed Code
Temperature Characteristics
Nominal Capacitance
Marked with code (omitted for nominal body diameter ø6mm)
Marked with 3 figures
Marked with code (omitted for nominal body diameter ø6mm)
Marked with code
Capacitance Tolerance
DC250V
(Marked with horizontal line over nominal capacitance for nominal body diameter ø6mm)
Omitted
Rated Voltage
DC500V
Marked with code (In case of DC3.15kV, marked with 3KV)
DC1-3.15kV
Marked with
Abbreviation
(omitted for nominal body diameter ø9mm and under)
Manufacturer's Identification
Manufactured Date Code
33
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DC250V, R Characteristics
DC Rated
Voltage
(V)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DEHR32E221Kppp
DEHR32E331Kppp
DEHR32E471Kppp
DEHR32E681Kppp
DEHR32E102Kppp
DEHR32E152Kppp
DEHR32E222Kppp
DEHR32E332Kppp
DEHR32E472Kppp
DEHR32E682Kppp
DEHR32E103Kppp
250
250
250
250
250
250
250
250
250
250
250
220 ±10%
330 ±10%
6
6
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
470 ±10%
6
680 ±10%
6
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
6800 ±10%
10000 ±10%
6
7
8
9
10
12
12
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
DC500V, C Characteristics
DC Rated
Voltage
(V)
Lead
Package
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Long Bulk Short Bulk
DEHC32H331Kppp
DEHC32H471Kppp
DEHC32H681Kppp
DEHC32H102Kppp
DEHC32H152Kppp
DEHC32H222Kppp
DEHC32H332Kppp
DEHC32H472Kppp
500
500
500
500
500
500
500
500
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
6
6
5.0
5.0
5.0
5.0
5.0
5.0
5.0
10.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A4B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B4B
N2A
N2A
N2A
N2A
N2A
N2A
N2A
-
7
7
8
9
10
12
14
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
DC1-3.15kV, R Characteristics
DC Rated
Voltage
(V)
Lead
Package
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Long Bulk Short Bulk
DEHR33A221Kppp
DEHR33A331Kppp
DEHR33A471Kppp
DEHR33A681Kppp
DEHR33A102Kppp
DEHR33A152Kppp
DEHR33A222Kppp
DEHR33A332Kppp
DEHR33A472Kppp
DEHR33D221Kppp
DEHR33D271Kppp
DEHR33D331Kppp
DEHR33D391Kppp
DEHR33D471Kppp
DEHR33D561Kppp
DEHR33D681Kppp
DEHR33D821Kppp
DEHR33D102Kppp
DEHR33D122Kppp
DEHR33D152Kppp
DEHR33D182Kppp
1000
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
220 ±10%
270 ±10%
330 ±10%
390 ±10%
470 ±10%
560 ±10%
680 ±10%
820 ±10%
1000 ±10%
1200 ±10%
1500 ±10%
1800 ±10%
7
7
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
A2B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
A3B
C3B
C3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
B2B
B2B
B2B
B2B
B2B
B2B
B3B
B3B
B3B
D3B
D3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
N2A
N2A
N2A
N2A
N2A
N2A
N3A
N7A
N7A
P3A
P3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N7A
7
8
9
11
13
15
17
7
7
8
8
9
9
10
11
12
12
12
14
Continued on the following page.
34
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
DC Rated
Voltage
(V)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DEHR33D222Kppp
DEHR33D272Kppp
DEHR33D332Kppp
DEHR33D392Kppp
DEHR33D472Kppp
DEHR33F151Kppp
DEHR33F181Kppp
DEHR33F221Kppp
DEHR33F271Kppp
DEHR33F331Kppp
DEHR33F391Kppp
DEHR33F471Kppp
DEHR33F561Kppp
DEHR33F681Kppp
DEHR33F821Kppp
DEHR33F102Kppp
DEHR33F122Kppp
DEHR33F152Kppp
DEHR33F182Kppp
DEHR33F222Kppp
DEHR33F272Kppp
2000
2000
2000
2000
2000
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
2200 ±10%
2700 ±10%
3300 ±10%
3900 ±10%
4700 ±10%
150 ±10%
180 ±10%
220 ±10%
270 ±10%
330 ±10%
390 ±10%
470 ±10%
560 ±10%
680 ±10%
820 ±10%
1000 ±10%
1200 ±10%
1500 ±10%
1800 ±10%
2200 ±10%
2700 ±10%
15
17
19
20
21
7
7.5
7.5
10.0
10.0
10.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.0
5.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
A3B
A3B
A4B
A4B
A4B
C3B
C3B
C3B
C3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A4B
B3B
B3B
B4B
B4B
B4B
D3B
D3B
D3B
D3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B4B
N7A
N7A
-
-
-
P3A
P3A
P3A
P3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N7A
N7A
N7A
N7A
-
7
7
7
8
9
10
10
11
12
13
14
15
16
17
19
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
7
35
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
No.
1
Item
Specifications
-25 to +125°C
Test Method
Operating Temperature Range
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage (DC1 to 3.15kV) or DC voltage of
250% of the rated voltage (DC250V, DC500V) is applied
between the lead wires for 1 to 5 sec.
Between Lead
Wires
No failure
(Charge/Discharge currentV50mA)
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
right, and AC1250V(r.m.s.) <50/60Hz> is
applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
Metal balls
(Charge/Discharge currentV50mA)
Char. R [DC1 to 3.15kV], Char. C
: 10000MΩ min.
Char. R [DC250V]: 1000MΩ min.
The insulation resistance should be measured with
DC500±50V (Char. R [DC 250V]: DC100±15V) within
60±5 sec. of charging.
Insulation
Resistance (I.R.) Wires
Between Lead
5
6
7
The capacitance should be measured at 20°C with 1±0.2kHz
and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
Char. R [DC250V]: 0.4% max.
Char. R [DC1 to 3.15kV]: 0.2% max.
Char. C: 0.3% max.
7
The dissipation factor should be measured at 20°C with
1±0.2kHz and AC5V(r.m.s.) max.
Dissipation Factor (D.F.)
The capacitance measurement should be made at each step
specified in Table.
Temp. Char.
T. C.
-25 to +85°C +85 to +125°C
R
C
Within ±15%
Within ±20%
Within +15/-30%
8
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before measurements.
Step
1
2
3
4
5
Temp. (°C)
20±2
-25±3
20±2
125±2
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N (5N for
lead diameter 0.5mm), and keep it for 10±1
sec.
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
Capacitance
Within specified tolerance
Vibration
Resistance
10
Char. R [DC250V]: 0.4% max.
Char. R [DC1 to 3.15kV]: 0.2% max.
Char. C: 0.3% max.
D.F.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
11 Solderability of Leads
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
36
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Test Method
Appearance
No marked defect
Within ±10%
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
3.5±0.5 sec.
Capacitance
Change
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Soldering Effect
(Non-Preheat)
12
Dielectric Strength
(Between Lead
Wires)
Capacitor should be stored for 24±2 hrs. at room condition*1.
Measurement order:
Per item 4.
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
•
Capacitance Dielectric strength (Char. R [DC250V])
Appearance
No marked defect
Within ±10%
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Then, as in figure, the lead wires
Capacitor
Thermal
Screen
Capacitance
Change
1.5
to 2.0mm
should be immersed in solder of
Molten
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
Solder
Soldering Effect
(On-Preheat)
13
Pre-treatment:
Dielectric Strength
(Between Lead
Wires)
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*1.
Measurement order:
Per item 4.
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
7
•
Capacitance Dielectric strength (Char. R [DC250V])
Appearance
No marked defect
Within ±10%
The capacitor should be subjected to 5 temperature cycles.
<Temperature Cycle>
Capacitance
Change
Step Temperature (°C) Time (min)
1
2
3
4
-25±3
Room Temp.
125±3
30
3
30
3
D.F.
I.R.
0.4% max.
1000MΩ min.
Room Temp.
Cycle time: 5 cycle
Temperature
Cycle
Pre-treatment:
14
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*1.
Measurement order:
Dielectric Strength
(Between Lead
Wires)
Per item 4.
•
•
I.R. Dielectric strength -> Pre-treatment -> Capacitance
D.F. -> Temperature cycle test -> Post-treatment ->
•
•
•
Capacitance D.F. I.R. Dielectric strength
(Char. R [DC250V])
Appearance
No marked defect
Within ±10%
0.4% max.
Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Measurement order:
Capacitance
Change
D.F.
Humidity (Under
Steady State)
15
I.R.
1000MΩ min.
•
I.R. -> Pre-treatment -> Capacitance D.F. -> Humidity test ->
•
•
Post-treatment -> Capacitance D.F. I.R.
(Char. R [DC250V])
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
37
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
(Char. R [DC1 to 3.15kV], Char. C)
Capacitance
Change
Within ±10%
0.6% max.
D.F.
Humidity
Loading
16
Post-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. (Char. R [DC250V])
Measurement order:
I.R.
1000MΩ min.
•
I.R. -> Pre-treatment -> Capacitance D.F. ->
Humidity loading test -> I.R.*2 -> Post-treatment ->
•
Capacitance D.F. (Char. R [DC250V])
Appearance
No marked defect
Within ±10%
0.4% max.
Apply a DC voltage of 200% of the rated voltage (DC250V,
DC500V) or DC voltage of 150% of the rated voltage (DC1 to
3.15kV) for 1000 +48/-0 hrs. at 125±2°C with a relative
humidity of 50% max.
Capacitance
Change
D.F.
(Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*1 for 24±2 hrs.
17 Life
Char. R [DC1 to 3.15kV], Char. C
: 2000MΩ min.
Char. R [DC250V]: 1000MΩ min.
I.R.
7
Measurement order:
•
I.R. -> Pre-treatment -> Capacitance D.F. -> Life test ->
3
•
I.R.* -> Post-treatment -> Capacitance D.F.
(Char. R [DC250V])
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 The measurement of I.R. will be held in 1 to 2 hrs. after Humidity loading test.
*3 The measurement of I.R. will be held in 12 to 24 hrs. after Life test.
38
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
DEA Series (125 deg. C Guaranteed/Class 1/DC1k-3.15kV)
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
■ Features
1. Temperature compensating type ceramics realize low
heat dissipation than DEH/DES series.
e
2. Operating temperature range is guaranteed up to 125
degrees C.
3. Coated with flame-retardant epoxy resin
F±1.0
ø d
(equivalent to UL94V-0 standard).
(in mm)
4. Taping available for automatic insertion.
Lead Code Coating Extension e
ø d
Style
Up to the end of crimp 0.6±0.05 Fig. 1
A2, A3
C1, CD
C3
[Bulk]
3.0 max.
3.0 max.
0.5±0.05 Fig. 2
0.6±0.05 Fig. 2
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
■ Applications
1. Ideal for use as the ballast in back lighting
inverters for liquid crystal display.
<Fig. 1>
T max.
<Fig. 2>
T max.
2. Ideal for use on high frequency pulse circuits such
as a horizontal resonance circuit for CTV and snubber
circuits for switching power supplies.
D max.
e
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
ø d
F±0.8
(in mm)
Lead Code Coating Extension e
ø d
Style
8
Up to the end of crimp 0.6±0.05 Fig. 1
B2, B3
D1, DD
D3
[Bulk]
3.0 max.
3.0 max.
0.5±0.05 Fig. 2
0.6±0.05 Fig. 2
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
■ Marking
Temp. Char.
SL
Nominal Body Diameter
68
ø4.5-5mm
ø6mm
1KV
39
3KV
66
181J
2KV
66
ø7-9mm
391J
3KV
66
ø10-16mm
Under 100pF: Actual value, 100pF and over: Marked with 3 figures
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Marked with code (omitted for nominal body diameter ø6mm and under)
Marked with code (In case of DC3.15kV, marked with 3KV)
Marked with
(omitted for nominal body diameter ø9mm and under)
Manufacturer's Identification
Manufactured Date Code
Abbreviation (omitted for nominal body diameter ø5mm and under)
39
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
SL Characteristics
DC Rated
Voltage
(V)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DEA1X3A100Jppp
DEA1X3A120Jppp
DEA1X3A150Jppp
DEA1X3A180Jppp
DEA1X3A220Jppp
DEA1X3A270Jppp
DEA1X3A330Jppp
DEA1X3A390Jppp
DEA1X3A470Jppp
DEA1X3A560Jppp
DEA1X3A680Jppp
DEA1X3A820Jppp
DEA1X3A101Jppp
DEA1X3A121Jppp
DEA1X3A151Jppp
DEA1X3A181Jppp
DEA1X3A221Jppp
DEA1X3A271Jppp
DEA1X3A331Jppp
DEA1X3A391Jppp
DEA1X3A471Jppp
DEA1X3A561Jppp
DEA1X3D100Jppp
DEA1X3D120Jppp
DEA1X3D150Jppp
DEA1X3D180Jppp
DEA1X3D220Jppp
DEA1X3D270Jppp
DEA1X3D330Jppp
DEA1X3D390Jppp
DEA1X3D470Jppp
DEA1X3D560Jppp
DEA1X3D680Jppp
DEA1X3D820Jppp
DEA1X3D101Jppp
DEA1X3D121Jppp
DEA1X3D151Jppp
DEA1X3D181Jppp
DEA1X3D221Jppp
DEA1X3D271Jppp
DEA1X3D331Jppp
DEA1X3D391Jppp
DEA1X3D471Jppp
DEA1X3D561Jppp
DEA1X3F100Jppp
DEA1X3F120Jppp
DEA1X3F150Jppp
DEA1X3F180Jppp
DEA1X3F220Jppp
DEA1X3F270Jppp
DEA1X3F330Jppp
DEA1X3F390Jppp
DEA1X3F470Jppp
DEA1X3F560Jppp
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
10 ±5%
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±5%
39 ±5%
47 ±5%
56 ±5%
68 ±5%
82 ±5%
100 ±5%
120 ±5%
150 ±5%
180 ±5%
220 ±5%
270 ±5%
330 ±5%
390 ±5%
470 ±5%
560 ±5%
10 ±5%
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±5%
39 ±5%
47 ±5%
56 ±5%
68 ±5%
82 ±5%
100 ±5%
120 ±5%
150 ±5%
180 ±5%
220 ±5%
270 ±5%
330 ±5%
390 ±5%
470 ±5%
560 ±5%
10 ±5%
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±5%
39 ±5%
47 ±5%
56 ±5%
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
C1B
C1B
C1B
C1B
C1B
C1B
C1B
C1B
C1B
C1B
C1B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A3B
C1B
C1B
C1B
C1B
C1B
C1B
C1B
C1B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
A3B
A3B
CDB
CDB
CDB
CDB
CDB
C3B
C3B
C3B
C3B
C3B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B3B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B3B
B3B
B3B
B3B
DDB
DDB
DDB
DDB
DDB
D3B
D3B
D3B
D3B
D3B
P2A
P2A
P2A
P2A
P2A
P2A
P2A
P2A
P2A
P2A
P2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N3A
P2A
P2A
P2A
P2A
P2A
P2A
P2A
P2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N3A
N3A
N7A
N7A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
5
6
6
6
7
7
8
9
10
10
11
12
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5
8
6
6
6
7
7
8
8
9
10
11
12
13
14
15
5
5
5
5
5
6
6
6
7
7
Continued on the following page.
40
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
DC Rated
Voltage
(V)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DEA1X3F680Jppp
DEA1X3F820Jppp
DEA1X3F101Jppp
DEA1X3F121Jppp
DEA1X3F151Jppp
DEA1X3F181Jppp
DEA1X3F221Jppp
DEA1X3F271Jppp
DEA1X3F331Jppp
DEA1X3F391Jppp
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
68 ±5%
82 ±5%
8
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N7A
N7A
N7A
8
100 ±5%
120 ±5%
150 ±5%
180 ±5%
220 ±5%
270 ±5%
330 ±5%
390 ±5%
9
10
11
11
12
14
15
16
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
8
41
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEA Series Specifications and Test Methods
No.
1
Item
Specifications
-25 to +125°C
Test Method
Operating Temperature Range
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires for
1 to 5 sec. (Charge/Discharge currentV50mA)
Between Lead
Wires
No failure
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
right, and AC1250V(r.m.s.) <50/60Hz> is
applied for 1 to 5 sec. between capacitor
Metal balls
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Insulation
Resistance (I.R.) Wires
Between Lead
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
5
6
7
10000MΩ min.
The capacitance should be measured at 20°C with 1±0.2MHz
and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
400+20C*2min. (30pF under)
1000 min. (30pF min.)
The Q should be measured at 20°C with 1±0.2MHz and
AC5V(r.m.s.) max.
Q
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The capacitance measurement should be made at each step
specified in Table.
8
Temperature Characteristics
Step
1
2
3
4
5
Temp. (°C)
20±2
-25±3
20±2
85±2
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N (5N for
lead diameter 0.5mm), and keep it for 10±1
sec.
8
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
Capacitance
Q
Within specified tolerance
Vibration
Resistance
10
400+20C*2min. (30pF under)
1000 min. (30pF min.)
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
Within ±2.5%
The lead wire should be immersed into the melted solder of
350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5
to 2mm from the main body for 3.5±0.5 sec.
(Body of ø5mm and under: 5±0.5 sec.)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Capacitance
Change
Soldering Effect
(Non-Preheat)
12
Dielectric Strength
(Between Lead
Wires)
Per item 4.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
42
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEA Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Test Method
First the capacitor should be
Appearance
No marked defect
Within ±2.5%
Capacitor
1.5
Thermal
Screen
stored at 120+0/-5°C for
60+0/-5 sec.
Capacitance
Change
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
to 2.0mm
Soldering Effect
(On-Preheat)
Molten
Solder
13
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Appearance
No marked defect
Within ±5%
The capacitor should be subjected to 5 temperature cycles.
<Temperature Cycle>
Capacitance
Change
Step Temperature (°C) Time (min)
1
2
3
4
-25±3
Room Temp.
125±3
30
3
30
3
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
Temperature
Cycle
Q
14
Room Temp.
I.R.
1000MΩ min.
Cycle time: 5 cycle
Dielectric Strength
(Between Lead
Wires)
Post-treatment:
Per item 4.
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Appearance
No marked defect
Within ±5%
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Capacitance
Change
Humidity (Under
Steady State)
15
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Q
I.R.
1000MΩ min.
Appearance
No marked defect
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity.
(Charge/Discharge currentV50mA)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Capacitance
Change
Within ±5%
8
Humidity
Loading
16
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
Q
I.R.
1000MΩ min.
Appearance
No marked defect
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 125±2°C with a relative humidity of 50%
max. (Charge/Discharge currentV50mA)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*1.
Capacitance
Change
Within ±3%
17 Life
275+5/2C*2min. (30pF under)
350 min. (30pF min.)
Q
I.R.
2000MΩ min.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
43
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
DEB Series (Class 2/DC1k-3.15kV)
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
■ Features
1. Small size and high capacitance
2. Coated with flame-retardant epoxy resin
e
(equivalent to UL94V-0 standard).
3. Taping available for automatic insertion.
F±1.0
ø d
■ Applications
(in mm)
Ideal for use on decoupling circuits for power supplies.
Lead Code Coating Extension e
ø d
Style
Up to the end of crimp 0.6±0.05 Fig. 1
A2, A3
C1, CD
C3
[Bulk]
3.0 max.
3.0 max.
0.5±0.05 Fig. 2
0.6±0.05 Fig. 2
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
e
ø d
F±0.8
(in mm)
Lead Code Coating Extension e
ø d
Style
Up to the end of crimp 0.6±0.05 Fig. 1
B2, B3
D1, DD
D3
[Bulk]
3.0 max.
3.0 max.
0.5±0.05 Fig. 2
0.6±0.05 Fig. 2
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
9
■ Marking
Temp. Char.
B
E
F
Nominal Body Diameter
221
102
102
ø4.5-5mm
ø6mm
3KV
1KV
2KV
331
3KV
66
102
2KV
66
222
1KV
66
102K
3KV
66
102Z
3KV
66
472Z
2KV
66
ø7-9mm
B
E
103Z
2KV
66
332K
3KV
66
472Z
3KV
66
ø10-16mm
Marked with code for char. B and E (omitted for nominal body diameter ø9mm and under)
Marked with 3 figures
Temperature Characteristics
Nominal Capacitance
Marked with code (omitted for nominal body diameter ø6mm and under)
Marked with code (In case of DC3.15kV, marked with 3KV)
Capacitance Tolerance
Rated Voltage
Marked with
(omitted for nominal body diameter ø9mm and under)
Manufacturer's Identification
Manufactured Date Code
Abbreviation (omitted for nominal body diameter ø5mm and under)
44
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
B Characteristics
DC Rated
Voltage
(V)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DEBB33A101Kppp
DEBB33A151Kppp
DEBB33A221Kppp
DEBB33A331Kppp
DEBB33A471Kppp
DEBB33A681Kppp
DEBB33A102Kppp
DEBB33A152Kppp
DEBB33A222Kppp
DEBB33A332Kppp
DEBB33A472Kppp
DEBB33A682Kppp
DEBB33D101Kppp
DEBB33D151Kppp
DEBB33D221Kppp
DEBB33D331Kppp
DEBB33D471Kppp
DEBB33D681Kppp
DEBB33D102Kppp
DEBB33D152Kppp
DEBB33D222Kppp
DEBB33D332Kppp
DEBB33D472Kppp
DEBB33F101Kppp
DEBB33F151Kppp
DEBB33F221Kppp
DEBB33F331Kppp
DEBB33F471Kppp
DEBB33F681Kppp
DEBB33F102Kppp
DEBB33F152Kppp
DEBB33F222Kppp
DEBB33F332Kppp
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
3150
3150
3150
3150
3150
3150
3150
3150
3150
3150
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
6800 ±10%
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4.5
4.5
4.5
4.5
5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
C1B
C1B
C1B
C1B
C1B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
C1B
C1B
C1B
C1B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
CDB
CDB
CDB
C3B
C3B
A3B
A3B
A3B
A3B
A3B
D1B
D1B
D1B
D1B
D1B
B2B
B2B
B2B
B2B
B2B
B3B
B3B
D1B
D1B
D1B
D1B
B2B
B2B
B2B
B2B
B2B
B3B
B3B
DDB
DDB
DDB
D3B
D3B
B3B
B3B
B3B
B3B
B3B
P2A
P2A
P2A
P2A
P2A
N2A
N2A
N2A
N2A
N2A
N3A
N7A
P2A
P2A
P2A
P2A
N2A
N2A
N2A
N2A
N2A
N3A
N7A
P3A
P3A
P3A
P3A
P3A
N3A
N3A
N3A
N3A
N7A
6
6
8
9
10
12
15
4.5
4.5
4.5
5
6
7
8
9
10
12
15
5
5
5
6
9
7
8
9
11
13
15
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
E Characteristics
DC Rated
Voltage
(V)
Lead
Package
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Long Bulk Short Bulk
DEBE33A102Zppp
DEBE33A222Zppp
DEBE33A472Zppp
DEBE33A103Zppp
DEBE33D102Zppp
DEBE33D222Zppp
DEBE33D472Zppp
DEBE33D103Zppp
DEBE33F102Zppp
DEBE33F222Zppp
DEBE33F472Zppp
1000
1000
1000
1000
2000
2000
2000
2000
3150
3150
3150
1000 +80/-20%
2200 +80/-20%
4700 +80/-20%
10000 +80/-20%
1000 +80/-20%
2200 +80/-20%
4700 +80/-20%
10000 +80/-20%
1000 +80/-20%
2200 +80/-20%
4700 +80/-20%
5
7
5.0
5.0
5.0
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
C1B
A2B
A2B
A3B
A2B
A2B
A2B
A3B
C3B
A3B
A3B
D1B
B2B
B2B
B3B
B2B
B2B
B2B
B3B
D3B
B3B
B3B
P2A
N2A
N2A
N3A
N2A
N2A
N2A
N7A
P3A
N3A
N3A
9
13
6
8
11
16
7
10
13
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
45
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
F Characteristics
DC Rated
Voltage
(V)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DEBF33A222Zppp
DEBF33A472Zppp
DEBF33A103Zppp
DEBF33D102Zppp
DEBF33D222Zppp
DEBF33D472Zppp
DEBF33D103Zppp
1000
1000
1000
2000
2000
2000
2000
2200 +80/-20%
4700 +80/-20%
10000 +80/-20%
1000 +80/-20%
2200 +80/-20%
4700 +80/-20%
10000 +80/-20%
6
7
5.0
5.0
5.0
5.0
5.0
5.0
7.5
4.0
4.0
4.0
5.0
5.0
5.0
5.0
A2B
A2B
A2B
C1B
A2B
A2B
A3B
B2B
B2B
B2B
D1B
B2B
B2B
B3B
N2A
N2A
N2A
P2A
N2A
N2A
N3A
10
5
7
9
12
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
9
46
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEB Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +85°C
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires for
1 to 5 sec. (Charge/Discharge currentV50mA)
Between Lead
Wires
No failure
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2mm off the metal balls as shown in
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
the figure at right, and DC voltage of 1.3kV
is applied for 1 to 5 sec. between capacitor
Metal balls
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Insulation
Resistance (I.R.) Wires
Between Lead
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
5
6
7
10000MΩ min.
The capacitance should be measured at 20°C with 1±0.2kHz
and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
Char. B, E: 2.5% max.
Char. F: 5.0% max.
The dissipation factor should be measured at 20°C with
1±0.2kHz and AC5V(r.m.s.) max.
Dissipation Factor (D.F.)
Char. B: Within ±10%
Char. E: Within +20/-55%
Char. F: Within +30/-80%
The capacitance measurement should be made at each step
specified in Table.
8
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition* for 24±2 hrs. before measurements.
Step
1
2
3
4
5
Temp. (°C)
20±2
-25±3
20±2
85±2
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N (5N for
lead diameter 0.5mm), and keep it for 10±1
sec.
Pull
9
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
Capacitance
D.F.
Within specified tolerance
Vibration
Resistance
10
Char. B, E: 2.5% max.
Char. F: 5.0% max.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
The lead wire should be immersed into the melted solder of
350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5
to 2mm from the main body for 3.5±0.5 sec.
(Body of ø5mm and under: 5±0.5 sec.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Char. B: Within ±5%
Char. E: Within ±15%
Char. F: Within ±20%
Capacitance
Change
Soldering Effect
(Non-Preheat)
12
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
47
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEB Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
First the capacitor should be
Capacitor
1.5
Thermal
Screen
stored at 120+0/-5°C for
60+0/-5 sec.
Char. B: Within ±5%
Char. E: Within ±15%
Char. F: Within ±20%
Capacitance
Change
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
to 2.0mm
Molten
Solder
Soldering Effect
(On-Preheat)
13
Dielectric Strength
(Between Lead
Wires)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Per item 4.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*.
Appearance
No marked defect
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
<Temperature Cycle>
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
Capacitance
Change
Step Temperature (°C) Time (min)
1
2
3
4
-25±3
Room Temp.
85±3
30
3
30
3
Char. B, E: 4.0% max.
Char. F: 7.5% max.
D.F.
I.R.
Room Temp.
2000MΩ min.
Temperature
Cycle time: 5 cycle
14 and Immersion
Cycle
<Immersion Cycle>
Step Temperature (°C) Time (min) Immersion Water
1
2
65+5/-0
0±3
15
15
Clean water
Salt water
Dielectric Strength
(Between Lead
Wires)
Cycle time : 2 cycle
Per item 4.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*.
Appearance
No marked defect
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
Capacitance
Change
Humidity (Under
15
9
Steady State)
Char. B, E: 5.0% max.
Char. F: 7.5% max.
D.F.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*.
I.R.
1000MΩ min.
Appearance
No marked defect
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
Capacitance
Change
Humidity
16
Loading
before initial measurements.
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
Char. B, E: 5.0% max.
Char. F: 7.5% max.
D.F.
I.R.
500MΩ min.
Appearance
No marked defect
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 85±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±30%
Capacitance
Change
17 Life
Char. B, E: 4.0% max.
Char. F: 7.5% max.
D.F.
I.R.
2000MΩ min.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
48
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
DEC Series (Class 1, 2/DC6.3kV)
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
■ Features
Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
e
■ Applications
1. Ideal for use as the ballast in back lighting
F±1.0
ø d
inverters for liquid crystal displays (SL Char.).
2. Ideal for use on high voltage circuits such as
(in mm)
Lead Code Coating Extension e
ø d
Style
Cockcroft circuits (B Char.).
[Bulk]
Up to the end of crimp 0.6±0.05 Fig. 1
3.0 max. 0.6±0.05 Fig. 2
A3
C4
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
■ Marking
Temp. Char.
SL
B
E
Nominal Body Diameter
10J
6KV
ø7mm
47J
6KV
66
331K
6KV
66
ø8-9mm
B
10
151J
6KV
66
222Z
6KV
66
102K
6KV
66
ø10-15mm
Marked with code for char. B (omitted for nominal body diameter ø9mm and under)
Under 100pF: Actual value, 100pF and over: Marked with 3 figures
Marked with code
Temperature Characteristics
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Marked with code (In case of DC6.3kV, marked with 6KV)
Marked with
(omitted for nominal body diameter ø9mm and under)
Manufacturer's Identification
Manufactured Date Code
Abbreviation (omitted for nominal body diameter ø7mm)
SL Characteristics
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
DEC1X3J100JA3BMS1
DEC1X3J100JC4BMS1
DEC1X3J120JA3B
DEC1X3J120JC4B
DEC1X3J150JA3B
DEC1X3J150JC4B
DEC1X3J180JA3B
DEC1X3J180JC4B
DEC1X3J220JA3B
DEC1X3J220JC4B
6300
6300
6300
6300
6300
6300
6300
6300
6300
6300
10 ±5%
10 ±5%
12 ±5%
12 ±5%
15 ±5%
15 ±5%
18 ±5%
18 ±5%
22 ±5%
22 ±5%
7
7
8
8
8
8
9
9
9
9
7.5
10.0
7.5
7.0
7.0
7.0
10.0
7.5
7.0
7.0
10.0
7.5
7.0
7.0
10.0
7.5
7.0
7.0
7.0
10.0
Continued on the following page.
49
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
DEC1X3J270JA3B
DEC1X3J270JC4B
DEC1X3J330JA3B
DEC1X3J330JC4B
DEC1X3J390JA3B
DEC1X3J390JC4B
DEC1X3J470JA3B
DEC1X3J470JC4B
DEC1X3J560JC4B
DEC1X3J680JC4B
DEC1X3J820JC4B
DEC1X3J101JC4B
DEC1X3J121JC4B
DEC1X3J151JC4B
6300
6300
6300
6300
6300
6300
6300
6300
6300
6300
6300
6300
6300
6300
27 ±5%
27 ±5%
33 ±5%
33 ±5%
39 ±5%
39 ±5%
47 ±5%
47 ±5%
56 ±5%
68 ±5%
82 ±5%
100 ±5%
120 ±5%
150 ±5%
9
9
7.5
10.0
7.5
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
9
9
10.0
7.5
9
9
10.0
7.5
9
9
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10
12
12
13
14
15
B Characteristics
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
DECB33J101KC4B
DECB33J151KC4B
DECB33J221KC4B
DECB33J331KC4B
DECB33J471KC4B
DECB33J681KC4B
DECB33J102KC4B
6300
6300
6300
6300
6300
6300
6300
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
9
9
10.0
10.0
10.0
10.0
10.0
10.0
10.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
9
9
10
11
13
E Characteristics
DC Rated
Voltage
(V)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
10
DECE33J102ZC4B
DECE33J222ZC4B
6300
6300
1000 +80/-20%
2200 +80/-20%
11
15
10.0
10.0
7.0
7.0
50
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEC Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +85°C
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires for
1 to 5 sec. (Charge/Discharge currentV50mA)
Between Lead
Wires
No failure
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2mm off the metal balls as shown in
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
the figure at right, and DC voltage of 1.3kV
is applied for 1 to 5 sec. between capacitor
Metal balls
lead wires and metal balls.
(Charge/Discharge currentV50mA)
Insulation
Resistance (I.R.) Wires
Between Lead
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
5
6
10000MΩ min.
The capacitance should be measured at 20°C with 1±0.2kHz
(Char. SL: 1±0.2MHz) and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
Char. SL: 400+20C*2min. (30pF under)
1000 min. (30pF min.)
Q
The dissipation factor and Q should be measured at 20°C with
1±0.2kHz (Char. SL: 1±0.2MHz) and AC5V(r.m.s.) max.
7
Dissipation Factor (D.F.)
Char. B, E: 2.5% max.
Char. SL: +350 to -1000ppm/°C
The capacitance measurement should be made at each step
(Temp. range: +20 to +85°C) specified in Table.
Char. B: Within ±10%
Char. E: Within +20/-55%
8
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*1 for 24±2 hrs. before measurements. (Char. B, E)
Step
1
2
3
4
5
Temp. (°C)
20±2
-25±3
20±2
85±2
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
10
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
Capacitance
Within specified tolerance
Vibration
Resistance
Char. SL: 400+20C*2min. (30pF under)
1000 min. (30pF min.)
10
Q
D.F.
Char. B, E: 2.5% max.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
3.5±0.5 sec.
Char. SL: Within ±2.5%
Char. B: Within ±5%
Char. E: Within ±15%
Capacitance
Change
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Soldering Effect
(Non-Preheat)
then placed at room condition*1
for 24±2 hrs.
12
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1. (Char. B, E)
Dielectric Strength
(Between Lead
Wires)
Per item 4.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
51
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEC Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
First the capacitor should be
Capacitor
1.5
Thermal
Screen
stored at 120+0/-5°C for
60+0/-5 sec.
Char. SL: Within ±2.5%
Char. B: Within ±5%
Char. E: Within ±15%
Capacitance
Change
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
to 2.0mm
Molten
Solder
Soldering Effect
(On-Preheat)
13
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1. (Char. B, E)
Appearance
No marked defect
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Char. SL: Within ±3%
Char. B: Within ±10%
Char. E: Within ±20%
Capacitance
Change
<Temperature Cycle>
Step Temperature (°C) Time (min)
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
1
2
3
4
-25±3
Room Temp.
85±3
30
3
30
3
Q
D.F.
I.R.
Char. B, E: 4.0% max.
Room Temp.
2000MΩ min.
Temperature
Cycle time: 5 cycle
14 and Immersion
Cycle
<Immersion Cycle>
Step Temperature (°C) Time (min) Immersion Water
1
2
65+5/-0
0±3
15
15
Clean water
Salt water
Cycle time: 2 cycle
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
Appearance
No marked defect
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Char. SL: Within ±5%
Char. B: Within ±10%
Char. E: Within ±20%
Capacitance
Change
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
Humidity (Under
15
Steady State)
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
10
Q
D.F.
Char. B, E: 5.0% max.
1000MΩ min.
I.R.
Appearance
No marked defect
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
(Char. B, E)
Char. SL: Within ±7.5%
Char. B: Within ±10%
Char. E: Within ±20%
Capacitance
Change
Humidity
16
Char. SL:
100+10/3C*2min. (30pF under)
200 min. (30pF min.)
Loading
Q
D.F.
Char. B, E: 5.0% max.
500MΩ min.
I.R.
Appearance
No marked defect
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 85±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1. (Char. SL)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
(Char. B, E)
Char. SL: Within ±3%
Char. B: Within ±10%
Char. E: Within ±20%
Capacitance
Change
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
17 Life
Q
D.F.
I.R.
Char. B, E: 4.0% max.
2000MΩ min.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
52
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors
DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p)
D max.
T max.
■ Features
1. We design capacitors in much more compact size than
DEC series, having reduced the diameter by 20% max.
e
2. Low self-heating at high frequency and high voltage
due to low dielectric loss of the ceramic material.
3. Operating temperature range is guaranteed up to 105
F±1.0
ø d
degrees C.
4. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
5. Taping available for automatic insertion.
(in mm)
Lead Code
Coating Extension e
Up to the end of crimp
ø d
0.6±0.05
[Bulk]
Vertical Crimp Long (A3)
A3
■ Applications
Ideal for use in LCD backlight inverter.
D max.
T max.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as Power train and
Safety equipment.
e
ø d
F±0.8
(in mm)
Lead Code
Coating Extension e
ø d
[Bulk]
Up to the end of crimp
0.6±0.05
J3
Vertical Crimp Short (J3)
■ Marking
Temp. Char.
CH
SL
Nominal Body Diameter
10J
6K~
66
33J
6K~
66
ø7-9mm
Temperature Characteristics
Upper horizontal line
–
11
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Actual value
Marked with code
Marked with code (Marked with 6K~)
Abbreviation
Manufactured Date Code
SL Characteristics
Rated
Voltage
(Vp-p)
Lead
Package
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
Part Number
Package
(mm)
Long Bulk Short Bulk
DEF1XLH100Jppp
DEF1XLH120Jppp
DEF1XLH150Jppp
DEF1XLH180Jppp
DEF1XLH220Jppp
DEF1XLH270Jppp
DEF1XLH330Jppp
DEF1XLH390Jppp
DEF1XLH470Jppp
6300
6300
6300
6300
6300
6300
6300
6300
6300
10 ±5%
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±5%
39 ±5%
47 ±5%
7
7
7
7
7
8
9
9
9
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
53
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CH Characteristics
Rated
Voltage
(Vp-p)
Lead
Lead
Lead
Package
Taping
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Part Number
Package
Package
Long Bulk Short Bulk
DEF2CLH020Cppp
DEF2CLH030Cppp
DEF2CLH040Cppp
DEF2CLH050Dppp
DEF2CLH060Dppp
DEF2CLH070Dppp
DEF2CLH080Dppp
DEF2CLH090Dppp
DEF2CLH100Jppp
6300
6300
6300
6300
6300
6300
6300
6300
6300
2 ±0.25pF
3 ±0.25pF
4 ±0.25pF
5 ±0.5pF
6 ±0.5pF
7 ±0.5pF
8 ±0.5pF
9 ±0.5pF
10 ±5%
7
7
7
7
7
8
8
8
8
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
11
54
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEF Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +105°C
No marked defect on appearance form
and dimensions are within specified
range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC12.6kV is
applied between the lead wires for 1 to 5 sec.
(Charge/Discharge currentV50mA)
Between Lead
Wires
No failure
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2.0mm off the metal balls as shown
in the figure at right, and DC voltage of
1.3kV is applied for 1 to 5 sec. between
capacitor lead wires and metal balls.
(Charge/Discharge currentV50mA)
Dielectric
Strength
4
Body Insulation
No failure
About
2.0mm
Metal balls
Insulation
Resistance (I.R.) Wires
Between Lead
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
5
6
7
10000MΩ min.
The capacitance should be measured at 20°C with 1±0.2MHz
and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
400+20C*2min. (30pF under)
1000 min. (30pF min.)
The Q should be measured at 20°C with 1±0.2MHz and
AC5V(r.m.s.) max.
Q
Char. CH: 0±60ppm/°C
Char. SL: +350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The capacitance measurement should be made at each step
specified in Table.
8
Temperature Characteristics
Step
1
2
3
4
5
Temp. (°C)
20±2
-25±3
20±2
85±2
20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1 minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
Appearance
No marked defect
Vibration
Resistance
Capacitance
Q
Within specified tolerance
10
400+20C*2min. (30pF under)
1000 min. (30pF min.)
11
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2.0mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over 3/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
Within ±2.5%
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2.0mm from the main body for
3.5±0.5 sec.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
Capacitance
Change
Soldering Effect
(Non-Preheat)
12
Dielectric Strength
(Between Lead
Wires)
Per item 4.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
55
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEF Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
First the capacitor should be
Capacitor
1.5
Thermal
Screen
stored at 120+0/-5°C for
60+0/-5 sec.
Capacitance
Change
Within ±2.5%
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
to 2.0mm
Soldering Effect
(On-Preheat)
Molten
Solder
13
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
Appearance
No marked defect
Within ±3%
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Capacitance
Change
<Temperature Cycle>
200+10C*2min. (10pF under)
275+5/2C*2min. (10pF min. and 30pF under)
350 min. (30pF min.)
Step Temperature (°C) Time (min)
Q
1
2
3
4
-25±3
Room Temp.
105±3
30
3
30
3
I.R.
2000MΩ min.
Temperature
Room Temp.
14 and Immersion
Cycle
Cycle time: 5 cycle
<Immersion Cycle>
Step Temperature (°C) Time (min) Immersion Water
Dielectric Strength
(Between Lead
Wires)
1
2
65+5/-0
0±3
15
15
Clean water
Salt water
Per item 4.
Cycle time: 2 cycle
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition*1.
Appearance
No marked defect
Within ±5%
Capacitance
Change
Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
Humidity (Under
15
200+10C*2min. (10pF under)
275+5/2C*2min. (10pF min. and 30pF under)
350 min. (30pF min.)
Steady State)
Q
I.R.
1000MΩ min.
Appearance
No marked defect
Apply 6.3kVp-p at the frequency in Table for 1000+48/-0 hrs. at
105±2°C with a relative humidity of 50% max.
(Charge/Discharge currentV50mA.)
Capacitance
Change
Within ±3%
<Frequency>
200+10C*2min. (10pF under)
275+5/2C*2min. (10pF min. and 30pF under)
350 min. (30pF min.)
Capacitance (pF)
to 10
Frequency (kHz)
Q
16 Life
100
45
12 to 22
27 to 47
33
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition*1.
I.R.
2000MΩ min.
11
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
56
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Characteristics Data (Typical Example)
■ Capacitance - Temperature Characteristics
CH, SL, B, E, F char.
C, D, R char.
20
10
20
10
SL
CH
B
D
CH
SL
B
0
C
R
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
0
E
F
E
F
-10
-20
-30
R
C
D
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
80
100
120
140
Temp. (°C)
Temperature (°C)
■ Capacitance - DC Bias Characteristics
20
DESD33A471KA2B
DEA1X3D221JA2B
0
DEHR33D102KA3B
-20
-40
DEBB33D102KA2B
DEBE33D222ZA2B
-60
-80
-100
0
500
1000
1500
2000
DC Bias (V)
11
57
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Packaging
■ Taping Specifications
15.0mm pitch / lead spacing 7.5mm taping
Straight type
15.0mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: P3)
(Lead Code: N3)
∆S
P2
P
D
∆S
D
P2
P
ød
P1
F
ød
P1
F
øD0
øD0
R
P0
R
P0
30.0mm pitch / lead spacing 7.5mm taping
Vertical crimp type
12.7mm pitch / lead spacing 5.0mm taping
Straight type
(Lead Code: N7)
(Lead Code: P2)
P2
P
∆S
∆S
P2
D
D
P
ød
P1
ød
F
P1
F
øD0
øD0
R
P0
P0
R
O
12.7mm pitch / lead spacing 5.0mm taping
Vertical crimp type
(Lead Code: N2)
∆h1
∆h2
T max.
Marked
side
∆S
P2
D
P
ød
P1
F
H0
H0
Lead Code
N2, N3, N7
Lead Code
N3
Lead Code P2, P3
øD0
Except DEF Series
DEF Series
R
P0
Item
Code
P
P3
N3
N7
P2
N2
15.0
30.0
12.7
Pitch of component
Pitch of sprocket hole
Lead spacing
P0
F
15.0±0.3
7.5±1.0
7.5±1.5
3.75±1.0
12.7±0.3
+0.8
–0.2
5.0
P2
P1
D
6.35±1.3
3.85±0.7
Length from hole center to component center
Length from hole center to lead
Body diameter
See the individual product specifications.
11
∆S
W
0±2.0
0±1.0
Deviation along tape, left or right
Carrier tape width
18.0±0.5
W1
H
9.0±0.5
Position of sprocket hole
Lead distance between reference
and bottom planes
+1.5
–1.0
+1.5
20.0
—
20.0
—
–1.0
+2.0
+2.0
H0
r
φD0
φd
t1
—
18.0
—
18.0
–0
–0
+0.5 to -1.0
Protrusion length
4.0±0.1
0.6±0.05
0.6±0.3
Diameter of sprocket hole
Lead diameter
Total tape thickness
t2
1.5 max.
Total thickness, tape and lead wire
Body thickness
T
See the individual product specifications.
+0
L
11.0
Portion to cut in case of defect
Hold down tape width
–1.0
W0
W2
e
11.5 min.
1.5±1.5
Hold down tape position
Coating extension on lead
Deviation across tape, front
Deviation across tape, rear
3.0 max. (Vertical crimp type: Up to the end of crimp)
∆h1
∆h2
2.0 max. 1.0 max.
(in : mm)
Continued on the following page.
58
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Packaging
Continued from the preceding page.
■ Packaging Styles
Bulk
Taping
Polyethylene Bag
Ammo Pack
■ Minimum Quantity (Order in Sets Only)
[Bulk] 1,000 pcs.
[Taping]
1,500 pcs. (Lead Code: P2, N2)
1,000 pcs. (Lead Code: P3, N3*)
500 pcs. (Lead Code: N7)
900 pcs. for 2kV, 3.15kV and DEF Series
*
■ Minimum Order Quantity
[Bulk] 3,000 pcs.
[Taping]
3,000 pcs. (Lead Code: P2, N2)
3,000 pcs. (Lead Code: P3, N3*)
2,000 pcs. (Lead Code: N7)
2,700 pcs. for 2kV, 3.15kV and DEF Series
*
“Minimum Quantity” means the numbers of units of each delivery or order. The
quantity should be an integral multiple of the “minimum quantity”. (Please note
that the actual delivery quantity in a package may change sometimes.)
11
59
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
■ !Caution (Rating)
<DES/DEH/DEA/DEB/DEC Series>
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When DC-rated capacitors are to be used in input circuits
from commercial power source (AC filter), be sure to use
Safety Certified Capacitors because various regulations
on withstand voltage or impulse withstand established for
each equipment should be taken into considerations.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
When using the low-dissipation DEA (SL Char.) /DEC (SL
Char.) /DEH (C, R Char.) /DES (D Char.) series in a high-
frequency and high-voltage circuit, be sure to read the
instructions in item 4.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss. The frequency of
the applied sine wave voltage should be less than
300kHz. The applied voltage load (*) should be such that
the capacitor's self-generated heat is within 20°C in an
atmosphere temperature of 25°C. When measuring, use
a thermocouple of small thermal capacity-K of ø0.1mm in
conditions where the capacitor is not affected by radiant
heat from other components or surrounding ambient
fluctuations.
11
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability.
(Never attempt to perform measurement with the cooling
fan running. Otherwise, accurate measurement cannot
be ensured.)
*Before using the low-dissipation DEA/DEC (SL Char.)
/DEH/DES series, be sure to read the instructions in
item 4.
3. Fail-Safe
When capacitor is broken, failure may result in a short
circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure would follow
an electric shock, fire or fume.
Continued on the following page.
60
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
4. Load Reduction and Self-generated Heat During
Application of High-frequency and High-voltage
Due to the low self-heating characteristics of low-
dissipation capacitors, the allowable electric power of
these capacitors is generally much higher than that of B
characteristic capacitors. However, in case the self-
heating temperature is 20°C under a high-frequency
voltage whose peak-to-peak value equals the capacitor's
rated voltage, the capacitor's power consumption may
exceed its allowable electric power.
We are offering free software, The Capacitor Selection
Tool: by Voltage Form* which will assist you in selecting
a suitable capacitor.
The software can be downloaded from Murata's Internet
Web site.
(http://www.murata.com/designlib/mmcsv_e.html)
By inputting capacitance values and applied voltage
waveform of the specific capacitor series, this software
will calculate the capacitor's power consumption and list
suitable capacitors.
Therefore, when using the DEA/DEC (SL Char.) /DEH
/DES series in a high-frequency and high-voltage circuit
with a frequency of 1kHz or higher, make sure that the
Vp-p values including the DC bias, do not exceed the
applied voltage value specified in Table 1. Also make
sure that the self-heating temperature (the difference
between the capacitor's surface temperature and the
capacitor's ambient temperature ) at an ambient
temperature of 25°C does not exceed the value specified
in Table 1.
When the result of this software is different from the
measurement result of the self-heating temperature on
your side, please contact our sales representatives or
product engineers.
* Subject series are below.
· DEA/DEC (SL char.) /DEH/DES/DEF Series
As shown in Fig. 2, the self-heating temperature
depends on the ambient temperature. Therefore, if you
are not able to set the ambient temperature to
approximately 25°C, please contact our sales
representatives or product engineers.
FAILURE TO FOLLOW THE ABOVE CAUTIONS (ITEMS 1
TO 4) MAY RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION WHEN
THE PRODUCT IS USED.
<Table 1> Allowable Conditions at High-frequency
<Fig. 1> Relationship Between Applied Voltage and
Self-heating Temperature (Allowable Self-heating
Allowable Conditions
DC
Rated
Voltage
Capacitor's
Ambient
Temp. *2
at High-frequency *3
Temp. at 25°C Ambient Temp.)
Temp.
Char.
Series
Applied
Self-heating Temp.
DEH Series R Char. (Rated Voltage: DC1kV to 3.15kV)
Voltage (Max.) (25°C Ambient Temp.) *1
25
R
C
250V
500V
250Vp-p
500Vp-p
10°C Max.
20°C Max.
20°C Max.
5°C Max.
20°C Max.
5°C Max.
20°C Max.
5°C Max.
20
15
10
5
800Vp-p
1kV
2kV
1000Vp-p
1400Vp-p
2000Vp-p
1600Vp-p
3150Vp-p
1000Vp-p
2000Vp-p
DEH
R
11
Rated Voltage: 1kV 2kV
3.15kV
3.15kV
-25 to +85°C
0
100
1000
10000
1kV
2kV
Applied Voltage (Vp-p)
DEA
DEC
DES
SL
SL
D
5°C Max.
3.15kV 3150Vp-p
6.3kV 6300Vp-p
5°C Max.
15°C Max.
5°C Max.
DES Series D Char. (Rated Voltage: DC1kV)
500V
500Vp-p
800Vp-p
1000Vp-p
25
1kV
20
15
10
5
*1 Fig. 1 shows the relationship between the applied voltage and the allowable self-
heating temperature regarding 1 to 3.15kV rated voltage of the DEH series R
characteristic and 1kV rated voltage of the DES series D characteristic.
*2 When the ambient temperature is 85 to 125°C, the applied voltage needs to be
further reduced. If the DEA/DEH/DES series needs to be used at an ambient
temperature of 85 to 125°C, please contact our sales representatives or product
engineers.
Rated Voltage: DC1kV
0
*3 Fig. 3 shows reference data on the allowable voltage - frequency characteristics
for a sine wave voltage.
100
1000
10000
Applied Voltage (Vp-p)
Continued on the following page.
61
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
<Fig. 2> Dependence of Self-heating Temperature on
Ambient Temperature
DEH Series C Char. and R Char. (Rated Voltage: DC1kV to 3.15kV)
25
DEH Series R Char. (Rated Voltage: DC250V) and
DEA/DEC Series SL Char. (Rated Voltage: DC1kV to 6.3kV)
20
20
15
15
C Char. (500V)
R Char. (1 to 3.15kV)
10
R Char. (250V)
10
5
5
0
SL Char. (1 to 6.3kV)
0
0
20 (25)
40
60
80
100
0
20 (25)
40
60
80
100
Ambient Temperature (°C)
Ambient Temperature (°C)
DES Series D Char.
(Rated Voltage: DC500V to 1kV)
25
20
15
D Char. (500V to 1kV)
10
5
0
0
20 (25)
40
60
80
100
Ambient Temperature (°C)
Continued on the following page.
11
62
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
<Fig. 3> Allowable Voltage (Sine Wave Voltage) - Frequency Characteristics (At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
voltage is a rectangular wave or pulse wave voltage (instead
of a sine wave voltage), the heat generated by the capacitor
is higher than the value obtained by application of the sine
wave with the same fundamental frequency.
to the allowable voltage for a sine wave whose fundamental
frequency is twice as large as that of the rectangular wave or
pulse wave. This allowable voltage, however, varies
depending on the voltage and current waveforms.
Therefore, you are requested to make sure that the self-
heating temperature is not higher than the value specified in
Table 1.
Roughly calculated for reference, the allowable voltage for a
rectangular wave or pulse wave corresponds approximately
DEH Series R Char. (Rated Voltage: DC250V)
DEH Series C Char. (Rated Voltage: DC500V)
10000
10000
1000
1000
(500)
to 470pF
1000pF
2200pF
to 2200pF
4700pF
(250)
100
4700pF
10000pF
100
1
10
100
1000
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
DEH Series R Char. (Rated Voltage: DC1kV)
DEH Series R Char. (Rated Voltage: DC2kV)
10000
1000
100
10000
1000
100
220pF
470pF
220pF
470pF
1000pF
2200pF
1000pF
2200pF
11
4700pF
4700pF
1
10
100
1000
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
DEH Series R Char. (Rated Voltage: DC3.15kV)
10000
(3150)
1000
220pF
470pF
1000pF
2200pF
100
1
10
100
1000
Frequency (kHz)
Continued on the following page.
63
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
<Fig. 3 (continued)> Allowable Voltage (Sine Wave Voltage) -
Frequency Characteristics
(At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
voltage is a rectangular wave or pulse wave voltage
(instead of a sine wave voltage), the heat generated by
the capacitor is higher than the value obtained by
application of the sine wave with the same fundamental
frequency.
approximately to the allowable voltage for a sine wave
whose fundamental frequency is twice as large as that of
the rectangular wave or pulse wave.
This allowable voltage, however, varies depending on the
voltage and current waveforms.
Therefore, you are requested to make sure that the self-
heating temperature is not higher than the value specified
in Table 1.
Roughly calculated for reference, the allowable voltage
for a rectangular wave or pulse wave corresponds
DEA Series SL Char. (Rated Voltage: DC1kV)
DEA Series SL Char. (Rated Voltage: DC2kV)
10000
10000
10pF
100pF
220pF
470pF
to 100pF
220pF
470pF
1000
1000
100
100
1
10
100
1000
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
DEA Series SL Char. (Rated Voltage: DC3.15kV)
DEC Series SL Char. (Rated Voltage: DC6.3kV)
10000
10000
(6300)
to 22pF
47pF
100pF
(3150)
1000
10pF
100pF
220pF
11
1000
100
100
1
10
100
1000
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
Continued on the following page.
64
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
<Fig. 3 (continued)> Allowable Voltage (Sine Wave Voltage) -
Frequency Characteristics
(At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
voltage is a rectangular wave or pulse wave voltage
(instead of a sine wave voltage), the heat generated by
the capacitor is higher than the value obtained by
application of the sine wave with the same fundamental
frequency.
approximately to the allowable voltage for a sine wave
whose fundamental frequency is twice as large as that of
the rectangular wave or pulse wave.
This allowable voltage, however, varies depending on the
voltage and current waveforms.
Therefore, you are requested to make sure that the self-
heating temperature is not higher than the value specified
in Table 1.
Roughly calculated for reference, the allowable voltage
for a rectangular wave or pulse wave corresponds
DES Series D Char. (Rated Voltage: DC500V)
DES Series D Char. (Rated Voltage: DC1kV)
10000
10000
100pF
220pF
470pF
1000
1000
1000pF
2200pF
4700pF
(500)
to 1000pF
2200pF
4700pF
100
100
1
10
100
1000
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
Continued on the following page.
11
65
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
<DEF Series>
1. Operating Voltage
The frequency of the applied sine wave voltage should be
less than 100kHz. The applied voltage should be less
than the value shown in figure below. In case of non-sine
wave which includes a harmonic frequency, please
contact our sales representatives or product engineers.
The temperature of the surface of capacitor:
below the upper limit of its rated operating temperature
range (including self-heating.)
10000
to 10pF
(6300)
12 to 22pF
27 to 47pF
The capacitor can be applied maximum
6.3kVp-p at 100kHz when lamp turn on.
Voltage
AC Voltage
Positional
Measurement
Vp-p
1000
1
10
100
Frequency (kHz)
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss.
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability. (Never attempt
to perform measurement with the cooling fan running.
Otherwise, accurate measurement cannot be ensured.)
3. Fail-Safe
11
When capacitor is broken, failure may result in a short
circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fume.
66
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors !Caution
■ !Caution (Storage and Operating Condition)
Operating and Storage Environment
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to
moisture. Before cleaning, bonding or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
Use capacitors within 6 months after delivery.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
■ !Caution (Soldering and Mounting)
1. Vibration and Impact
of the bonded, molded or coated product in the
intended equipment.
Do not expose a capacitor or its leads to
excessive shock or vibration during use.
2. Soldering
In case the amount of applications,
dryness/hardening conditions of adhesives and
molding resins containing organic solvents
(ethyl acetate, methyl ethyl ketone, toluene, etc.)
are unsuitable, the outer coating resin of a
capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding
resin or coating may cause outer coating resin
cracking and/or ceramic element cracking of a
capacitor in a temperature cycling.
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specification of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
When soldering capacitor with a soldering iron, it
should be performed in following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
3. Bonding, Resin Molding and Coating
Before bonding, molding or coating this product,
verify that these processes do not affect the
quality of capacitor by testing the performance
■ !Caution (Handling)
Vibration and Impact
11
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
67
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Notice
■ Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
■ Notice (Rating)
Capacitance Change of Capacitor
change greatly depending on the surrounding
temperature or an applied voltage. So, it is not
likely to be suitable for use in a time constant
circuit.
1. DEA/DEC/DEF Series (Temp. Char. CH, SL)
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this
product in a strict time constant circuit.
2. DEB/DEC Series (Temp. Char. B, E, F)
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
Please contact us if you need detailed information.
3. DEH/DES Series
Capacitance might change greatly depending on the
surrounding temperature or an applied voltage.
So, it is not likely to be suitable for use in a
time constant circuit. Please contact us if you
need detailed information.
11
68
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C85E.pdf
08.10.29
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications
Manufacturing plants which produce the products in this
catalog have obtained the ISO9000 quality system certificate.
Plant
Applied Standard
Izumo Murata Manufacturing Co., Ltd.
Murata Electronics (Thailand), Ltd.
Taiwan Murata Electronics Co., Ltd.
ISO9001
ISO9001
ISO9001
11
69
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
!Note
C85E.pdf
08.10.29
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
相关型号:
DEA1X3A330JC1B
CAPACITOR, CERAMIC, 1000V, SL, 0.000033uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
MURATA
DEA1X3A470JD1B
CAPACITOR, CERAMIC, 1000V, SL, 0.000047uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
MURATA
DEA1X3A560JC1B
CAPACITOR, CERAMIC, 1000V, SL, 0.000056uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
MURATA
©2020 ICPDF网 联系我们和版权申明