DEBB33A472KA2B [MURATA]

Ceramic Capacitor, Ceramic, 1000V, 10% +Tol, 10% -Tol, B, 10% TC, 0.0047uF, Through Hole Mount, RADIAL LEADED;


型号：	DEBB33A472KA2B
厂家：	muRata
描述：	Ceramic Capacitor, Ceramic, 1000V, 10% +Tol, 10% -Tol, B, 10% TC, 0.0047uF, Through Hole Mount, RADIAL LEADED
文件：	总5页 (文件大小：106K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

C85E.pdf

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

06.6.1

Safety Recognized/ High Voltage Ceramic Capacitors

DEB Series (Class 2/DC1k-3.15kV)

<Fig. 1>

T max.

<Fig. 2>

T max.

D max.

■ Features

1. Small size and high capacitance

2. Coated with flame-retardant epoxy resin

(equivalent to UL94V-0 standard).

3. Taping available for automatic insertion.

4. Available product for RoHS Restriction

(EU Directive 2002/95/EC).

F±1.0

ø d

(in mm)

Lead Code Coating Extension e

ø d

Style

Up to the end of crimp 0.6±0.05 Fig. 1

A2, A3

C1, CD

■ Applications

Ideal for use on decoupling circuits for power

[Bulk]

3.0 max.

0.5±0.05 Fig. 2

0.6±0.05 Fig. 2

Vertical Crimp Long (Fig. 1)

Straight Long (Fig. 2)

supplies.

<Fig. 1>

T max.

<Fig. 2>

T max.

D max.

ø d

F±0.8

(in mm)

Lead Code Coating Extension e

ø d

Style

Up to the end of crimp 0.6±0.05 Fig. 1

B2, B3

D1, DD

[Bulk]

3.0 max.

0.5±0.05 Fig. 2

0.6±0.05 Fig. 2

Vertical Crimp Short (Fig. 1)

Straight Short (Fig. 2)

■ Marking

Temp. Char.

Nominal Body Diameter

221

102

ø4.5-5mm

ø6mm

3KV

1KV

2KV

331

3KV

102

2KV

222

1KV

102K

3KV

102Z

3KV

472Z

2KV

ø7-9mm

103Z

2KV

332K

3KV

472Z

3KV

ø10-16mm

Marked with code for char. B and E (omitted for nominal body diameter ø9mm and under)

Marked with 3 figures

Temperature Characteristics

Nominal Capacitance

Marked with code (omitted for nominal body diameter ø6mm and under)

Marked with code (In case of DC3.15kV, marked with 3KV)

Capacitance Tolerance

Rated Voltage

Marked with

(omitted for nominal body diameter ø9mm and under)

Manufacturer's Identification

Manufactured Date Code

Abbreviation (omitted for nominal body diameter ø5mm and under)

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

C85E.pdf

sales representatives or product engineers before ordering.

06.6.1

B Characteristics

DC Rated

Voltage

(Vdc)

Lead

Package

Taping

Capacitance

(pF)

Body Dia. D

(mm)

Lead Spacing F

(mm)

Body Thickness T

(mm)

Part Number

Package

Long Bulk Short Bulk

DEBB33A101Kppp

DEBB33A151Kppp

DEBB33A221Kppp

DEBB33A331Kppp

DEBB33A471Kppp

DEBB33A681Kppp

DEBB33A102Kppp

DEBB33A152Kppp

DEBB33A222Kppp

DEBB33A332Kppp

DEBB33A472Kppp

DEBB33A682Kppp

DEBB33D101Kppp

DEBB33D151Kppp

DEBB33D221Kppp

DEBB33D331Kppp

DEBB33D471Kppp

DEBB33D681Kppp

DEBB33D102Kppp

DEBB33D152Kppp

DEBB33D222Kppp

DEBB33D332Kppp

DEBB33D472Kppp

DEBB33F101Kppp

DEBB33F151Kppp

DEBB33F221Kppp

DEBB33F331Kppp

DEBB33F471Kppp

DEBB33F681Kppp

DEBB33F102Kppp

DEBB33F152Kppp

DEBB33F222Kppp

DEBB33F332Kppp

1000

2000

3150

100 ±10%

150 ±10%

220 ±10%

330 ±10%

470 ±10%

680 ±10%

1000 ±10%

1500 ±10%

2200 ±10%

3300 ±10%

4700 ±10%

6800 ±10%

100 ±10%

150 ±10%

220 ±10%

330 ±10%

470 ±10%

680 ±10%

1000 ±10%

1500 ±10%

2200 ±10%

3300 ±10%

4700 ±10%

100 ±10%

150 ±10%

220 ±10%

330 ±10%

470 ±10%

680 ±10%

1000 ±10%

1500 ±10%

2200 ±10%

3300 ±10%

4.5

5.0

7.5

5.0

7.5

4.0

5.0

6.0

C1B

A2B

A3B

C1B

A2B

A3B

CDB

C3B

A3B

D1B

B2B

B3B

D1B

B2B

B3B

DDB

D3B

B3B

P2A

N2A

N3A

N7A

P2A

N2A

N3A

N7A

P3A

N3A

N7A

4.5

Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

E Characteristics

DC Rated

Voltage

(Vdc)

Lead

Package

Lead

Package

Taping

Capacitance

(pF)

Body Dia. D

(mm)

Lead Spacing F

(mm)

Body Thickness T

(mm)

Part Number

Package

Long Bulk Short Bulk

DEBE33A102Zppp

DEBE33A222Zppp

DEBE33A472Zppp

DEBE33A103Zppp

DEBE33D102Zppp

DEBE33D222Zppp

DEBE33D472Zppp

DEBE33D103Zppp

DEBE33F102Zppp

DEBE33F222Zppp

DEBE33F472Zppp

1000

2000

3150

1000 +80/-20%

2200 +80/-20%

4700 +80/-20%

10000 +80/-20%

1000 +80/-20%

2200 +80/-20%

4700 +80/-20%

10000 +80/-20%

1000 +80/-20%

2200 +80/-20%

4700 +80/-20%

5.0

7.5

5.0

7.5

4.0

5.0

6.0

C1B

A2B

A3B

A2B

A3B

C3B

A3B

D1B

B2B

B3B

B2B

B3B

D3B

B3B

P2A

N2A

N3A

N2A

N7A

P3A

N3A

Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

C85E.pdf

sales representatives or product engineers before ordering.

06.6.1

F Characteristics

DC Rated

Voltage

(Vdc)

Lead

Package

Taping

Capacitance

(pF)

Body Dia. D

(mm)

Lead Spacing F

(mm)

Body Thickness T

(mm)

Part Number

Package

Long Bulk Short Bulk

DEBF33A222Zppp

DEBF33A472Zppp

DEBF33A103Zppp

DEBF33D102Zppp

DEBF33D222Zppp

DEBF33D472Zppp

DEBF33D103Zppp

1000

2000

2200 +80/-20%

4700 +80/-20%

10000 +80/-20%

1000 +80/-20%

2200 +80/-20%

4700 +80/-20%

10000 +80/-20%

5.0

7.5

4.0

5.0

A2B

C1B

A2B

A3B

B2B

D1B

B2B

B3B

N2A

P2A

N2A

N3A

Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

C85E.pdf

sales representatives or product engineers before ordering.

06.6.1

DEB Series Specifications and Test Methods

No.

Item

Specifications

Testing Method

Operating Temperature Range

-25 to +85°C

No marked defect on appearance form

and dimensions are within specified

range.

The capacitor should be visually inspected for evidence of

defect. Dimensions should be measured with slide calipers.

Appearance and Dimensions

Marking

To be easily legible

The capacitor should be visually inspected.

The capacitor should not be damaged when DC voltage of

200% of the rated voltage is applied between the lead wires for

1 to 5 sec. (Charge/Discharge currentV50mA)

Between Lead

Wires

No failure

The capacitor is placed in the container

with metal balls of diameter 1mm so that

each lead wire, short circuited, is kept

about 2mm off the metal balls as shown in

Dielectric

Strength

Body Insulation

No failure

About 2mm

the figure at right, and DC voltage of 1.3kV

is applied for 1 to 5 sec. between capacitor

Metal balls

lead wires and metal balls.

(Charge/Discharge currentV50mA)

Insulation

Resistance (I.R.) Wires

Between Lead

The insulation resistance should be measured with

DC500±50V within 60±5 sec. of charging.

10000MΩ min.

The capacitance should be measured at 20°C with 1±0.2kHz

and AC5V(r.m.s.) max.

Capacitance

Within specified tolerance

Char. B, E: 2.5% max.

Char. F: 5.0% max.

The dissipation factor should be measured at 20°C with

1±0.2kHz and AC5V(r.m.s.) max.

Dissipation Factor (D.F.)

Char. B: Within ±10%

Char. E: Within +20/-55%

Char. F: Within +30/-80%

The capacitance measurement should be made at each step

specified in Table.

Temperature Characteristics

Pre-treatment : Capacitor should be stored at 85±2°C for 1 hr., then placed at

*room condition for 24±2 hrs. before measurements.

Step

Temp. (°C)

20±2

-25±3

20±2

85±2

20±2

As shown in the figure at right, fix the body of

the capacitor and apply a tensile weight

gradually to each lead wire in the radial

direction of the capacitor up to 10N (5N for

lead diameter 0.5mm), and keep it for 10±1

sec.

Pull

Lead wire should not be cut off.

Capacitor should not be broken.

Strength of Lead

Each lead wire should be subjected to 5N (2.5N for lead

diameter 0.5mm) of weight and bent 90° at the point of egress,

in one direction, then returned to its original position and bent

90° in the opposite direction at the rate of one bend in 2 to 3

sec.

Bending

Appearance

No marked defect

The capacitor should be firmly soldered to the supporting lead

wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in

total amplitude, with about a 1 minute rate of vibration change

from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,

2 hrs. each in 3 mutually perpendicular directions.

Capacitance

D.F.

Within specified tolerance

Vibration

Resistance

Char. B, E: 2.5% max.

Char. F: 5.0% max.

The lead wire of a capacitor should be dipped into a ethanol

solution of 25wt% rosin and then into molten solder for 2±0.5

sec. In both cases the depth of dipping is up to about 1.5 to

2mm from the root of lead wires.

Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C

H63 Eutectic Solder 235±5°C

Lead wire should be soldered with

uniform coating on the axial direction

over 3/4 of the circumferential direction.

11 Solderability of Leads

Appearance

No marked defect

The lead wire should be immersed into the melted solder of

350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5

to 2mm from the main body for 3.5±0.5 sec.

(Body of ø5mm and under: 5±0.5 sec.)

Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

before initial measurements.

Char. B: Within ± 5%

Char. E: Within ± 15%

Char. F: Within ± 20%

Capacitance

Change

Soldering Effect

(Non-Preheat)

Dielectric Strength

(Between Lead

Wires)

Per item 4.

Post-treatment: Capacitor should be stored for 4 to 24 hrs. at

*room condition.

* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Continued on the following page.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

C85E.pdf

sales representatives or product engineers before ordering.

06.6.1

DEB Series Specifications and Test Methods

Continued from the preceding page.

No.

Item

Appearance

Specifications

No marked defect

Testing Method

First the capacitor should be

Capacitor

1.5

Thermal

Screen

stored at 120+0/-5°C for

60+0/-5 sec.

Char. B: Within ± 5%

Char. E: Within ± 15%

Char. F: Within ± 20%

Capacitance

Change

Then, as in figure, the lead wires

should be immersed solder of

260+0/-5°C up to 1.5 to 2.0mm

from the root of terminal for

7.5+0/-1 sec.

to 2.0mm

Molten

Solder

Soldering Effect

(On-Preheat)

Dielectric Strength

(Between Lead

Wires)

Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

before initial measurements.

Per item 4.

Post-treatment: Capacitor should be stored for 4 to 24 hrs. at

*room condition.

Appearance

No marked defect

The capacitor should be subjected to 5 temperature cycles,

then consecutively to 2 immersion cycles.

Char. B: Within ±10%

Char. E: Within ±20%

Char. F: Within ±30%

Capacitance

Change

Step Temperature (°C) Time (min)

-25±3

Room Temp.

85±3

Char. B, E: 4.0% max.

Char. F: 7.5% max.

D.F.

I.R.

Room Temp.

2000MΩ min.

Temperature

Cycle time: 5 cycle

14 and Immersion

Cycle

Step Temperature (°C) Time (min) Immersion water

65 +5/-0

0 ±3

Clean water

Salt water

Dielectric Strength

(Between Lead

Wires)

Cycle time : 2 cycle

Per item 4.

Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

before initial measurements.

Post-treatment: Capacitor should be stored for 4 to 24 hrs. at

*room condition.

Appearance

No marked defect

Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%

relative humidity.

Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

before initial measurements.

Char. B: Within ±10%

Char. E: Within ±20%

Char. F: Within ±30%

Capacitance

Change

Humidity (Under

Steady State)

Char. B, E: 5.0% max.

Char. F: 7.5% max.

D.F.

Post-treatment: Capacitor should be stored for 1 to 2 hrs. at

*room condition.

I.R.

1000MΩ min.

Appearance

No marked defect

Apply the rated voltage for 500 +24/-0 hrs. at 40±2°C in 90 to

95% relative humidity. (Charge/Discharge currentV50mA)

Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

Char. B: Within ±10%

Char. E: Within ±20%

Char. F: Within ±30%

Capacitance

Change

Humidity

before initial measurements.

Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

Char. B, E: 5.0% max.

Char. F: 7.5% max.

D.F.

I.R.

500MΩ min.

Appearance

No marked defect

Apply a DC voltage of 150% of the rated voltage for

1000 +48/-0 hrs. at 85±2°C with a relative humidity of 50%

max. (Charge/Discharge currentV50mA)

Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

before initial measurements.

Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,

then placed at *room condition for 24±2 hrs.

Char. B: Within ±10%

Char. E: Within ±20%

Char. F: Within ±30%

Capacitance

Change

17 Life

Char. B, E: 4.0% max.

Char. F: 7.5% max.

D.F.

I.R.

2000MΩ min.

* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

DEBB33A472KA2B [MURATA]

相关型号：

DEBB33A472KA3B

DEBB33ACN2A

DEBB33ADN2A

DEBB33D101KC1B

DEBB33D101KP2A

DEBB33D102KA2B

DEBB33D102KN2A

DEBB33D151KC1B

DEBB33D152KA2B

DEBB33D221KC1B

DEBB33D222KA2B

DEBB33D222KN2A