DEF2CLH070DA3B [MURATA]
CAPACITOR, CERAMIC, 6300V, CH, 0.000007uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT;
| 型号： | DEF2CLH070DA3B |
| 厂家： | 
muRata |
| 描述： | CAPACITOR, CERAMIC, 6300V, CH, 0.000007uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT 电容器 |
| 文件： | 总70页 (文件大小：1544K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
C85E.pdf
May 17,2016
Safety Standard Certified Ceramic Capacitors/
High Voltage Ceramic Capacitors
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
Fꢀ
ꢁ**ꢀ2&#ꢀ.0-"3!21ꢀ',ꢀ2&'1ꢀ!ꢂ2ꢂ*-%ꢀ!-+.*7ꢀ
5'2&ꢀꢃꢄꢀꢅ-ꢆꢇ@
Fꢀ
ꢃꢄꢀꢅ-ꢆꢇꢀ'1ꢀ2&#ꢀꢃ30-.#ꢂ,ꢀꢈ'0#!2'4#ꢀ
|z{{GGꢃꢄꢀ-,ꢀ2&#ꢀꢅ#120'!2'-,ꢀ-$ꢀ2&#ꢀ
ꢄ1#ꢀ-$ꢀꢉ#02ꢂ',ꢀꢆꢂ8ꢂ0"-31ꢀꢇ3 12ꢂ,!#1ꢀ',ꢀ
ꢃ*#!20'!ꢂ*ꢀꢂ,"ꢀꢃ*#!20-,'!ꢀꢃ/3'.+#,2@ꢀ
Fꢀ
Forꢀ+-0#ꢀ"#2ꢂ'*1Aꢀ.*#ꢂ1#ꢀ0#$#rꢀ2oꢀ-urꢀ
5# 1'2#ꢀ'Murꢂ2ꢂ1ꢀA..roꢂc&ꢀ$o0ꢀꢃꢄꢀꢅ-ꢆꢇ'
ꢀH&22.BGG555@+30ꢂ2ꢂ@!-+G#,-
#3G13..-02G!-+.*'ꢂ,!#G0-&1J@ꢀ
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Contents
Product specifications are as of March 2016.
2
3
4
5
6
7
8
9
Part Numbering
p2
p5
Safety Standard Certified Ceramic Capacitors
Type KY (Basic Insulation) -Class X1, Y2- (Recommend)
1
Type KX New Small Size (Reinforced Insulation) -Class X1, Y1- (Recommend)
p8
2
Type KY/KX Specifications and Test Methods
p11
AC250V Ceramic Capacitor Non Safety Certified Type
DEJ Series (Based on the Electrical Appliance and Material Safety Law of Japan)
DEJ Series Specifications and Test Methods
p15
p16
3
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
Safety Certified Ceramic Capacitors Packaging
Safety Certified Ceramic Capacitors !Caution
p19
p21
p23
p26
Safety Certified Ceramic Capacitors Notice
High Voltage Ceramic Capacitors
DEH Series (125°C Guaranteed/Low-dissipation Factor/DC2kV, 3.15kV)
p27
p29
4
5
6
7
8
DEH Series Specifications and Test Methods
DEA Series (125°C Guaranteed/Class 1/DC2k-3.15kV)
DEA Series Specifications and Test Methods
p31
p33
DEB Series (Class 2/DC2k-3.15kV)
DEB Series Specifications and Test Methods
p35
p37
DEC Series (Class 1, 2/DC6.3kV)
DEC Series Specifications and Test Methods
p39
p41
DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p)
DEF Series Specifications and Test Methods
p43
p45
High Voltage Ceramic Capacitors Characteristics Data (Typical Example)
High Voltage Ceramic Capacitors Packaging
High Voltage Ceramic Capacitors !Caution
p47
p48
p50
p55
High Voltage Ceramic Capacitors Notice
Safety Standard Certified Ceramic Capacitors for Automotive
Type KJ -Class X1, Y2- (For Automotive Use/AC Line Filter of PHEV/EV Charger) p56
Type KJ Specifications and Test Methods
9
p57
Safety Certified Ceramic Capacitors for Automotive Characteristics Data (Typical Example)
Safety Certified Ceramic Capacitors for Automotive Packaging
Safety Certified Ceramic Capacitors for Automotive !Caution
Safety Certified Ceramic Capacitors for Automotive Notice
p61
p62
p63
p66
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications p67
Please check the MURATA website (http://www.murata.com/)
if you cannot find a part number in this catalog.
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Safety Standard Certified Ceramic Capacitors
(Part Number)
DE
1
2
2
E3 KY 102
M
6
N3
7
A
8
F
:
3
4
5
9
1Product ID 2Series Category
7Lead Style
Dimensions (mm)
Lead
Product
Code
Outline
Contents
ID
Code
Lead Style
Lead
Spacing
Pitch of
Diameter
Components
IEC61384-ꢀ4 Class Xꢀ, Yꢀ
IEC61384-ꢀ4 Class Xꢀ, Yꢁ
1
2
Safety Standard
Certified
A2
±
Vertical Crimp
Long
DE
A3
A4
7.±
ꢀ1
±
ø1.6±1.1±
—
-Products based on the
Electrical Appliance and
Material Safety Law of Japan-
ACꢁ±1V (r.m.s.)
J
B2/J2
B3/J3
B4/J4
C3
Vertical Crimp
Short
For Electrical Appliance and Material Safety Law of Japan, the first
three digits (1Product ID and 2Series Category) express "Series
Name."
For Safety Certified Capacitors, the first three digits express product
code. The fourth figure expresses certified type shown in 4Safety
Standard Certified Type column.
7.±
ꢀ1
7.±
7.±
±
ø1.6±1.1±
—
Straight Long
Straight Short
ø1.6±1.1±
ø1.6±1.1±
—
—
D3
N2
ꢀꢁ.7
ꢀ±
Vertical Crimp
Taping
N3
7.±
ꢀ1
7.±
ø1.6±1.1±
ø1.6±1.1±
3Temperature Characteristics
N4
ꢁ±.4
ꢀ±
Straight Taping
P3
Temperature
Characteristics
Cap. Change
or Temp. Coeff.
Temperature
Range
Code
8Packaging
B3
E3
F3
1X
B
E
±ꢀ15
Code
A
Packaging
+ꢁ15, -±±5
+315, -815
-ꢁ± to +8±°C
F
Ammo Pack Taping
Bulk
SL
+3±1 to -ꢀ111ppm/°C +ꢁ1 to +8±°C
B
4Rated Voltage/Safety Standard Certified Type
9Individual Specification Code
For part number that cannot be identified without "Individual
Specification," it is added at the end of part number, expressed by
three-digit alphanumerics.
Rated Voltage
Code
Xꢀ, Yꢀ; ACꢁ±1V (r.m.s.), AC311V (r.m.s.)
(Safety Standard Certified Type KX)
KX
:Halogen-free Compatible Product
Xꢀ, Yꢁ; ACꢁ±1V (r.m.s.), AC311V (r.m.s.)
(Safety Standard Certified Type KY)
KY
E2
ACꢁ±1V (r.m.s.)
5Capacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two numbers.
6Capacitance Tolerance
Code
Capacitance Tolerance
J
K
M
Z
±±5
±ꢀ15
±ꢁ15
+815, -ꢁ15
2
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors (2kV-6.3kV)
(Part Number)
DE
1
B
2
B3 3D 102
K
6
N2
7
A
8 9
3
4
5
1Product ID 2Series Category
6Capacitance Tolerance
Code
Capacitance Tolerance
±±.ꢀ2pF
Product
Code
Outline
Contents
ID
C
D
J
±±.2pF
Class ꢁ (Char. SL)
DCꢀ-3.ꢁ2kV Rated
A
B
C
F
±25
K
Z
±ꢁ±5
Class ꢀ
DCꢀ-3.ꢁ2kV Rated
+8±5, –ꢀ±5
Class ꢁ, ꢀ
DCꢂ.3kV Rated
7Lead Style
DE
High Voltage
Dimensions (mm)
LCD Backlight Inverter Circuit
ꢂ.3kVp-p
Code
Lead Style
Lead
Diameter Components
Lead
Spacing
Pitch of
High Temperature Guaranteed,
Low-dissipation Factor (Char. R)
DCꢀ-3.ꢁ2kV Rated
H
A2
A3
A4
B2
2
Vertical Crimp
Long
7.2
ꢁ±
2
ø±.ꢂ±±.±2
ø±.ꢂ±±.±2
–
–
The first three digits (1Product ID and 2Series Category) express
"Series Name."
Vertical Crimp
Short
B3/J3
B4
7.2
ꢁ±
2
3Temperature Characteristics
C1
ø±.2±±.±2
ø±.ꢂ±±.±2
Temperature
Characteristics
Cap. Change
or Temp. Coeff.
Temperature
Range
Code
C3
7.2
ꢁ±
7.2
2
Straight Long
Straight Short
–
B3
E3
F3
B
E
F
±ꢁ±5
C4
+ꢀ±5, –225
+3±5, –8±5
±ꢁ25
–ꢀ2 to +82°C
–ꢀ2 to +82°C
CD
D1
D3
DD
N2
N3
N7
P2
ø±.2±±.±2
ø±.2±±.±2
ø±.ꢂ±±.±2
ø±.2±±.±2
7.2
7.2
2
–
R3
R
+ꢁ25, –3±5
+ꢀ±5, –3±5
+
82 to
+
ꢁꢀ2°C
ꢁꢀ2°C
D3
1X
2C
D
–
ꢀ2 to
+
ꢁꢀ.7
ꢁ2
Vertical Crimp
Taping
SL
CH
+32± to –ꢁ±±±ppm/°C +ꢀ± to +82°C
7.2
7.2
2
ø±.ꢂ±±.±2
ø±.ꢂ±±.±2
±±ꢂ±ppm/°C
+ꢀ± to +82°C
3±
ꢁꢀ.7
ꢁ2
Straight Taping
4Rated Voltage
P3
7.2
Rated Voltage
DCꢀkV
Code
3D
3F
8Packaging
Code
A
Packaging
DC3.ꢁ2kV
DCꢂ.3kV
Ammo Pack Taping
Bulk
3J
ꢂ.3kVp-p
B
LH
5Capacitance
9Individual Specification Code
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two numbers.
For part number that cannot be identified without "Individual
Specification," it is added at the end of part number, expressed by
three-digit alphanumerics.
3
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Standard Certified Ceramic Capacitors for Automotive
(Part Number)
DE
1
6
2
E3 KJ 102
M
6
N3
7
A
8 9
3
4
5
1Product ID 2Series Category
7Lead Style
Dimensions (mm)
Lead
Product
Code
Outline
Contents
ID
Code
Lead Style
Lead
Spacing
Pitch of
Diameter
Components
Safety Standard
Certified
DE
6
IEC61384-±4 Class X±, Yꢀ
Vertical Crimp
Long
A3
B3
N3
—
The first three digits express product code. The fourth figure expresses
certified type shown in 4Safety Standard Certified Type column.
Vertical Crimp
Short
7.5
ø1.6±1.15
—
±5
3Temperature Characteristics
Vertical Crimp
Taping
Temperature
Characteristics or Temp. Coeff.
Cap. Change Temperature
Code
Range
8Packaging
B3
E3
B
E
±±10
-ꢀ5 to +85°C
Code
A
Packaging
+ꢀ10, -550
Ammo Pack Taping
Bulk
4Rated Voltage/Safety Standard Certified Type
B
Rated Voltage
Code
9Individual Specification Code
X±, Yꢀ; AC311V (r.m.s.)
(Safety Standard Certified Type KJ)
KJ
For part number that cannot be identified without "Individual
Specification," it is added at the end of part number, expressed by
three-digit alphanumerics.
5Capacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two numbers.
6Capacitance Tolerance
Code
K
Capacitance Tolerance
±±10
±ꢀ10
M
4
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Standard Certified Ceramic Capacitors
1
Type KY (Basic Insulation) -Class X1, Y2- (Recommend)
D max1
T max1
Features
1. Compact size; diameter 25% less than Type KH.
2. Operating temperature range guaranteed up to 125
degrees C.
e
3. Dielectric strength:
F±±1.
AC2000V (for lead spacing F=5mm)
AC2600V (for lead spacing F=7.5mm)
4. Class X1/Y2 capacitors certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/
ESTI/NSW/CQC.
ød
(in mm)
[Bulk]
Lead Code
A2, A3
Coating Extension e
Up to the end of crimp
ød
Vertical Crimp Long (A2, A3)
.16±.1.5
5. Coated with flame-retardant epoxy resin
(conforming to UL94V-0 standard).
We recommend a halogen-free product* as our
standard item.
D max1
T max1
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
6. Taping available for automatic insertion.
7. AC300V Rated Voltage item are newly added.
e
ød
F±.1ꢀ
Applications
(in mm)
1. Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Short (B2, B3)
Up to the end of crimp
.16±.1.5
B2, B3
2. Ideal for use on D-A isolation and noise absorption
for DAA modems without transformers.
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
Standard Certification
Standard No.
UL6.3ꢀ4-±4
Certified No.
E3792±
Rated Voltage
Standard No.
UL6.3ꢀ4-±4
Certified No.
E3792±
Rated Voltage
UL
UL
CSA E6.3ꢀ4-±4
IEC 6.3ꢀ4-±4
EN 6.3ꢀ4-±4
EN 6..65 (ꢀ1ꢀ, ±412)
IEC 6.3ꢀ4-±4
EN 6.3ꢀ4-±4
±2ꢀ32ꢀ.
CSA
CSA E6.3ꢀ4-±4
IEC 6.3ꢀ4-±4
EN 6.3ꢀ4-±4
EN 6..65 (ꢀ1ꢀ, ±412)
IEC 6.3ꢀ4-±4
EN 6.3ꢀ4-±4
±2ꢀ32ꢀ.
CSA
4...6273
KM 379.±
VDE
4...6273
KM 379.±
VDE
BSI
BSI
±2.7ꢀ4ꢀ
D.±..2
24±97
P±22±5.94
±21.±.2
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
±2.7ꢀ4ꢀ
D.±..2
24±97
P±22±5.94
±21.±.2
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
25.Vac (r1m1s1)
3..Vac (r1m1s1)
IEC 6.3ꢀ4-±4
EN 6.3ꢀ4-±4
IEC 6.3ꢀ4-±4
EN 6.3ꢀ4-±4
IEC 6.3ꢀ4-±4
AS325.
IEC 6.3ꢀ4-±4
AS325.
6ꢀ24
NSW
CQC
6ꢀ24
NSW
CQC
CQC.6..±.±7446
CQC.6..±.±7447
CQC±2..±.797.6
CQC±2..±.7994.
GB/T±4472
IEC 6.3ꢀ4-±4
Fꢀꢁ&#ꢀ!#02'q!ꢂ2'-,ꢀ,3+ #0ꢀ+'%&2ꢀ!&ꢂ,%#ꢀ"3#ꢀ2-ꢀ0#4'1'-,ꢀ-$ꢀ2&#ꢀꢂ..*'!ꢂ2'-,
ꢀꢀ12ꢂ,"ꢂ0"ꢀꢂ,"ꢀ!&ꢂ,%#1ꢀ',ꢀ2&#ꢀ0ꢂ,%#ꢀ-$ꢀꢂ!/3'1'2'-,@
Fꢀꢃ*#ꢂ1#ꢀ!-,2ꢂ!2ꢀ31ꢀ5&#,ꢀ2&#ꢀ!#02'q!ꢂ2'-,ꢀ-$ꢀꢄ-32&ꢀꢅ-0#ꢂ,ꢀꢄꢂ$#27ꢀꢄ2ꢂ,"ꢂ0"ꢀ
ꢀꢀ'1ꢀ,#!#11ꢂ07@
Fꢀꢁ&#ꢀ!#02'q!ꢂ2'-,ꢀ,3+ #0ꢀ+'%&2ꢀ!&ꢂ,%#ꢀ"3#ꢀ2-ꢀ0#4'1'-,ꢀ-$ꢀ2&#ꢀꢂ..*'!ꢂ2'-,
ꢀꢀ12ꢂ,"ꢂ0"ꢀꢂ,"ꢀ!&ꢂ,%#1ꢀ',ꢀ2&#ꢀ0ꢂ,%#ꢀ-$ꢀꢂ!/3'1'2'-,@
5
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Marking
Item
Type Designation
Nominal Capacitance
Example
1
2
KY
1
(Under 100pF: Actual value,
100pF and over: 3 digit system)
2
3
4
472M
3
4
Capacitance Tolerance
1
KY250
~
Company Name Code
X1Y2 HF
8
15
: Made in Thailand
: Made in Taiwan
5
0D
8
5
Manufactured Date Code
Class Code X1Y2
Rated Voltage Mark 250~, 300~
Halogen Free Mark HF
Rated Voltage 250Vac
Lead Spacing F=7.5mm
Lead
Spacing F
(mm)
Lead
Lead
Lead
AC Rated
Voltage
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package Package Package
Long Bulk Short Bulk Taping
DE21XKY100J
DE21XKY150J
DE21XKY220J
DE21XKY330J
DE21XKY470J
DE21XKY680J
DE2B3KY101K
DE2B3KY151K
DE2B3KY221K
DE2B3KY331K
DE2B3KY471K
DE2B3KY681K
DE2E3KY102M
DE2E3KY152M
DE2E3KY222M
DE2E3KY332M
DE2E3KY472M
DE2F3KY103M
M02F 250Vac(r.m.s.) SL
M02F 250Vac(r.m.s.) SL
M02F 250Vac(r.m.s.) SL
M02F 250Vac(r.m.s.) SL
M02F 250Vac(r.m.s.) SL
M02F 250Vac(r.m.s.) SL
10pF 5ꢀ
15pF 5ꢀ
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
8.0mm max.
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
22pF 5ꢀ
33pF 5ꢀ
47pF 5ꢀ
68pF 5ꢀ
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
B
B
B
B
B
B
E
E
E
E
E
F
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
470pF 10ꢀ
680pF 10ꢀ
1000pF 20ꢀ 7.0mm max.
1500pF 20ꢀ 7.0mm max.
2200pF 20ꢀ 8.0mm max.
3300pF 20ꢀ 9.0mm max.
4700pF 20ꢀ 10.0mm max.
10000pF 20ꢀ 14.0mm max.
ppp
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
M02F 250Vac(r.m.s.)
ppp
ppp
ppp
ppp
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V."
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
Lead Spacing F=5mm
Lead
Spacing F
(mm)
Lead
Lead
Lead
AC Rated
Voltage
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Package Package
Long Bulk Short Bulk Taping
DE21XKY100J
M01F 250Vac(r.m.s.) SL
M01F 250Vac(r.m.s.) SL
M01F 250Vac(r.m.s.) SL
M01F 250Vac(r.m.s.) SL
M01F 250Vac(r.m.s.) SL
M01F 250Vac(r.m.s.) SL
10pF 5ꢀ
15pF 5ꢀ
22pF 5ꢀ
33pF 5ꢀ
47pF 5ꢀ
68pF 5ꢀ
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
DE21XKY150J
DE21XKY220J
DE21XKY330J
DE21XKY470J
DE21XKY680J
DE2B3KY101K
DE2B3KY151K
DE2B3KY221K
DE2B3KY331K
DE2B3KY471K
DE2B3KY681K
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
B
B
B
B
B
B
E
100pF 10ꢀ 7.0mm max.
150pF 10ꢀ 7.0mm max.
220pF 10ꢀ 7.0mm max.
330pF 10ꢀ 7.0mm max.
470pF 10ꢀ 7.0mm max.
680pF 10ꢀ 8.0mm max.
1000pF 20ꢀ 7.0mm max.
DE2E3KY102M
ppp
Continued on the following page.
6
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Lead
Spacing F
(mm)
Lead
Lead
Lead
AC Rated
Voltage
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Package Package
Long Bulk Short Bulk Taping
DE2E3KY152M
DE2E3KY222M
DE2E3KY332M
DE2E3KY472M
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
M01F 250Vac(r.m.s.)
E
E
E
E
1500pF 20ꢀ 7.0mm max.
2200pF 20ꢀ 8.0mm max.
3300pF 20ꢀ 9.0mm max.
4700pF 20ꢀ 10.0mm max.
5.0
5.0
5.0
5.0
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
A2B
A2B
A2B
A2B
B2B
B2B
B2B
B2B
N2A
N2A
N2A
N2A
ppp
ppp
ppp
ppp
1
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M01" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2000V."
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
Rated Voltage 300Vac
Lead Spacing F=7.5mm
Lead
Spacing F
(mm)
Lead
Lead
Lead
AC Rated
Voltage
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package Package Package
Long Bulk Short Bulk Taping
DE2B3KY101K
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
B
B
B
B
B
B
E
E
E
E
E
F
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
470pF 10ꢀ
680pF 10ꢀ
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
8.0mm max.
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
ppp
ppp
ppp
ppp
ppp
ppp
DE2B3KY151K
DE2B3KY221K
DE2B3KY331K
DE2B3KY471K
DE2B3KY681K
DE2E3KY102M
DE2E3KY152M
DE2E3KY222M
DE2E3KY332M
DE2E3KY472M
DE2F3KY103M
1000pF 20ꢀ 7.0mm max.
1500pF 20ꢀ 7.0mm max.
2200pF 20ꢀ 8.0mm max.
3300pF 20ꢀ 9.0mm max.
4700pF 20ꢀ 10.0mm max.
10000pF 20ꢀ 14.0mm max.
ppp
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
U02F 300Vac(r.m.s.)
ppp
ppp
ppp
ppp
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "U02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V."
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
7
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
Note
C85E.pdf
May 17,2016
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Standard Certified Ceramic Capacitors
Type KX New Small Size (Reinforced Insulation) -Class X1, Y1- (Recommend)
D max1
T max1
Features
2
1. We design capacitors much more compact in size than
current Type KX, having reduced the diameter
by 20% max.
e
2. Operating temperature range guaranteed up to 125
degrees C.
3. Dielectric strength: AC4000V
F±±1.
ød
4. Class X1/Y1 capacitors certified by
UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/
ESTI/IMQ/CQC.
(in mm)
[Bulk]
Lead Code
A4
Coating Extension e
Up to the end of crimp
ød
Vertical Crimp Long (A4)
.16±.1.5
5. Can be use with a component in appliances
requiring reinforced insulation and double
insulation based on UL1492, IEC60065 and IEC60950.
6. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
D max1
T max1
We recommend a halogen-free product* as our
standard item.
e
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
ød
F±.1ꢀ
7. Taping available for automatic insertion.
8. AC300V Rated Voltage item are newly added.
(in mm)
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Short (B4)
Up to the end of crimp
.16±.1.5
B4
Applications
1. Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
2. Ideal for use on D-A isolation and noise absorption
for DAA modems without transformers.
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
*: Small sized Type KX differs from current Type KX
in electrical characteristics, such as the voltage
dependency, capacitance temperature dependency,
and Dielectric strength.
Therefore, before replacing current Type KX,
please make a performance check by equipment.
Please also refer to Notice (Rating) item 2,
"Performance Check by Equipment," below.
8
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Standard Certification Rated Voltage (AC250V) B, E Char.
Marking Rated Voltage (AC250V) B, E Char.
Item
Example
Standard No.
UL60384-14
CSA E60384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
Certified No.
E37921
1343810
1
2
3
4
UL
CSA
Type Designation
KX
Nominal Capacitance (3 digit system)
Capacitance Tolerance
2
1
3
4
40002831
KM 37901
VDE
472M
KX250
~
Company Name Code
8
15
: Made in Thailand
: Made in Taiwan
BSI
X1Y1 HF
5
5
0D
Manufactured Date Code
Class Code X1Y1
8
1200074
D01004
24191
P12215096
12.0094
2
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IEC 60384-14
EN 60384-14
Rated Voltage Mark 250~
Halogen Free Mark HF
EN 60384-14
GB/T14472
V4069
CQC02001001556
CQC04001011643
IMQ
CQC
Fꢀꢁ&#ꢀ!#02'q!ꢂ2'-,ꢀ,3+ #0ꢀ+'%&2ꢀ!&ꢂ,%#ꢀ"3#ꢀ2-ꢀ0#4'1'-,ꢀ-$ꢀ2&#ꢀꢂ..*'!ꢂ2'-,
ꢀꢀ12ꢂ,"ꢂ0"ꢀꢂ,"ꢀ!&ꢂ,%#1ꢀ',ꢀ2&#ꢀ0ꢂ,%#ꢀ-$ꢀꢂ!/3'1'2'-,@
Fꢀꢃ*#ꢂ1#ꢀ!-,2ꢂ!2ꢀ31ꢀ5&#,ꢀ2&#ꢀ!#02'q!ꢂ2'-,ꢀ-$ꢀꢄ-32&ꢀꢅ-0#ꢂ,ꢀꢄꢂ$#27ꢀꢄ2ꢂ,"ꢂ0"ꢀ
ꢀꢀ'1ꢀ,#!#11ꢂ07@
Standard Certification Rated Voltage (AC300V) B, E Char.
Marking Rated Voltage (AC300V) B, E Char.
Item
Example
Standard No.
UL60384-14
CSA E60384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
Certified No.
E37921
1343810
1
2
3
UL
CSA
Type Designation
KX
Nominal Capacitance (3 digit system)
Capacitance Tolerance
2
1
3
4
40002831
KM 37901
VDE
472M
KX300
~
4 Company Name Code
8
15
: Made in Thailand
: Made in Taiwan
BSI
X1Y1 HF
5
0D
5 Manufactured Date Code
Class Code X1Y1
8
1200074
D01004
24191
P12215096
12.0094
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IEC 60384-14
EN 60384-14
Rated Voltage Mark 300~
Halogen Free Mark HF
EN 60384-14
IEC 60384-14
V4069
CQC12001079735
CQC12001079941
IMQ
CQC
Fꢀꢁ&#ꢀ!#02'q!ꢂ2'-,ꢀ,3+ #0ꢀ+'%&2ꢀ!&ꢂ,%#ꢀ"3#ꢀ2-ꢀ0#4'1'-,ꢀ-$ꢀ2&#ꢀꢂ..*'!ꢂ2'-,
ꢀꢀ12ꢂ,"ꢂ0"ꢀꢂ,"ꢀ!&ꢂ,%#1ꢀ',ꢀ2&#ꢀ0ꢂ,%#ꢀ-$ꢀꢂ!/3'1'2'-,@
Rated Voltage 250Vac
Lead
Lead
Lead
Lead
AC Rated
Voltage
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Spacing F
(mm)
Package
Package Package
Long Bulk Short Bulk Taping
DE1B3KX101K
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
B
B
B
B
B
B
E
E
E
E
E
100pF 10ꢀ 7.0mm max.
150pF 10ꢀ 7.0mm max.
220pF 10ꢀ 8.0mm max.
330pF 10ꢀ 7.0mm max.
470pF 10ꢀ 7.0mm max.
680pF 10ꢀ 8.0mm max.
1000pF 20ꢀ 7.0mm max.
1500pF 20ꢀ 8.0mm max.
2200pF 20ꢀ 9.0mm max.
3300pF 20ꢀ 10.0mm max.
4700pF 20ꢀ 12.0mm max.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
ppp
ppp
ppp
ppp
ppp
ppp
DE1B3KX151K
DE1B3KX221K
DE1B3KX331K
DE1B3KX471K
DE1B3KX681K
DE1E3KX102M
DE1E3KX152M
DE1E3KX222M
DE1E3KX332M
DE1E3KX472M
ppp
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
N01F 250Vac(r.m.s.)
ppp
ppp
ppp
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
Please contact us when less than 100pF capacitance product is necessary.
9
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Rated Voltage 300Vac
Lead
Spacing F
(mm)
Lead
Lead
Lead
AC Rated
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Package Package
Voltage
Long Bulk Short Bulk Taping
DE1B3KX101K
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
B
B
B
B
B
B
E
E
E
E
E
100pF 10ꢀ 7.0mm max.
150pF 10ꢀ 7.0mm max.
220pF 10ꢀ 8.0mm max.
330pF 10ꢀ 7.0mm max.
470pF 10ꢀ 7.0mm max.
680pF 10ꢀ 8.0mm max.
1000pF 20ꢀ 7.0mm max.
1500pF 20ꢀ 8.0mm max.
2200pF 20ꢀ 9.0mm max.
3300pF 20ꢀ 10.0mm max.
4700pF 20ꢀ 12.0mm max.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
A4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
B4B
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
N4A
ppp
ppp
ppp
ppp
ppp
ppp
DE1B3KX151K
DE1B3KX221K
DE1B3KX331K
DE1B3KX471K
DE1B3KX681K
DE1E3KX102M
DE1E3KX152M
DE1E3KX222M
DE1E3KX332M
DE1E3KX472M
2
ppp
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
P01F 300Vac(r.m.s.)
ppp
ppp
ppp
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
10
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KY/KX Specifications and Test Methods
Operating Temperature Range: -40 to +125°C (Except for UL/VDE, -25 to +125°C)
No.
Item
Specifications
Test Method
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
No visible defect, and dimensions are within
specified range.
1
Appearance and Dimensions
2
3
Marking
To be easily legible
The capacitor should be visually inspected.
Capacitance
Within specified tolerance
Char.
B, E
F
Specifications
The capacitance, dissipation factor and Q should be measured
at 20˚C with 1 0.1ꢀHꢁ (char. SL: 1 0.1MHꢁ) and AC5V(r.m.s.)
max.
<
D.F. 2.5%
=
Dissipation Factor (D.F.)
Q
<
D.F. 5.0%
=
1
4
5
>
Q 400+20C* (C<30pF)
=
SL
>
>
=
Q 1000
(C 30pF)
=
The insulation resistance should be measured with
DC500 50V within 60 5 sec. of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
Insulation Resistance (I.R.)
10000MΩ min.
The capacitor should not be damaged when the test voltages
from Table 1 are applied between the lead wires for 60 sec.
<Table 1>
Between Lead
Wires
No failure
Type
KY
Test Voltage
For lead spacing F=5mm AC2000V(r.m.s.)
For lead spacing F=7.5mm AC2600V(r.m.s.)
AC4000V(r.m.s.)
KX
First, the terminals of the capacitor
should be connected together. Then,
as shown in the figure at right, a metal
foil should be closely wrapped around
the body of the capacitor to the
distance of about 3 to 6mm from
each terminal.
Then, the capacitor should be inserted
into a container filled with metal balls
of about 1mm diameter. Finally, AC
Dielectric
Strength
6
Metal
Foil
about
3 to 6mm
Metal
Balls
Body
Insulation
No failure
voltage from Table 2 is applied for 60 sec. between the
capacitor lead wires and metal balls.
<Table 2>
Type
KY
KX
Test Voltage
AC2600V(r.m.s.)
AC4000V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table 3.
Char.
Capacitance Change
B
E
F
Within 10%
<Table 3>
+20
–55
Within
Within
%
%
+30
–80
Step
1
2
Temperature (ºC)
20 2
7
8
Temperature Characteristics
(Temp. range: -25 to +85°C)
-25 2
3
4
5
20 2
85 2
20 2
Char.
Temperature Coefficient
SL
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The lead wire of a capacitor should be dipped into molten
solder for 2 0.5 sec.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245 5°C
H63 Eutectic Solder 235 5°C
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the
circumferential direction.
Solderability of Leads
*1 "C" expresses nominal capacitance value (pF).
Continued on the following page.
11
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KY/KX Specifications and Test Methods
2oꢃtCꢃued from the precedCꢃg pages
No.
Item
Appearance
Specifications
Test Method
Aꢀ ꢀhowꢃ Cꢃ the figure, the lead
wCreꢀ ꢀhould be Cmmerꢀed Cꢃ ꢀolder
of 350±±0ꢂ2 or 160±5ꢂ2 up to ±s5
to 1s0mm from the root of
termCꢃal for 3s5±0s5 ꢀecs ꢄ±0±±
ꢀecs for 160±5ꢂ2ꢅs
No marked defect
WCthCꢃ ±±0%
2apacCtor
±s5
Thermal
Screeꢃ
Capacitance
Change
to 1s0mm
Soldering
Effect
I.R.
±000MΩ mCꢃs
Molteꢃ
Solder
9
(Non-Preheat)
Pre-treatmeꢃt:
2apacCtor ꢀhould be ꢀtored at 85±1ꢂ2 for ± hrs, theꢃ placed at
room coꢃdCtCoꢃ*1 for 1ꢁ±1 hrꢀs before CꢃCtCal meaꢀuremeꢃtꢀs
Poꢀt-treatmeꢃt:
Dielectric
Strength
Per Item 6
2apacCtor ꢀhould be ꢀtored for ± to 1 hrꢀs at room coꢃdCtCoꢃs*1
Appearance
No marked defect
WCthCꢃ ±±0%
FCrꢀt the capacCtor ꢀhould be
ꢀtored at ±10+0/-5ꢂ2 for
60+0/-5 ꢀecs
Theꢃ, aꢀ Cꢃ the figure, the lead
wCreꢀ ꢀhould be Cmmerꢀed Cꢃ
ꢀolder of 160+0/-5ꢂ2 up to ±s5
to 1s0mm from the root of
termCꢃal for 7s5+0/-± ꢀecs
Pre-treatmeꢃt:
2apacCtor
Thermal
Screeꢃ
Capacitance
Change
±s5
to 1s0mm
I.R.
±000MΩ mCꢃs
Molteꢃ
Solder
Soldering
10 Effect
(On-Preheat)
Dielectric
Strength
Per Item 6
2apacCtor ꢀhould be ꢀtored at 85±1ꢂ2 for ± hrs, theꢃ placed at
room coꢃdCtCoꢃ*1 for 1ꢁ±1 hrꢀs before CꢃCtCal meaꢀuremeꢃtꢀs
Poꢀt-treatmeꢃt:
2apacCtor ꢀhould be ꢀtored for ± to 1 hrꢀs at room coꢃdCtCoꢃs*1
Appearance
Capacitance
No marked defect
WCthCꢃ the ꢀpecCfied toleraꢃce
The capacCtor ꢀhould be firmly ꢀoldered to the ꢀupportCꢃg lead
wCre aꢃd vCbrated at a frequeꢃcy raꢃge of ±0 to 55Hz, ±s5mm Cꢃ
total amplCtude, wCth about a ±-mCꢃute rate of vCbratCoꢃ chaꢃge
from ±0Hz to 55Hz aꢃd back to ±0Hzs
Apply for a total of 6 hrꢀs, 1 hrꢀs each Cꢃ 3 mutually
perpeꢃdCcular dCrectCoꢃꢀs
Vibration
Resistance
11
Char.
B, E
F
Specifications
<
DsFs 1s5%
=
D.F.
Q
<
DsFs 5s0%
=
±
>
Q ꢁ00+102* ꢄ2<30pFꢅ
Q ±000
=
SL
>
>
ꢄ2 30pFꢅ
=
=
Appearance
No marked defect
Char.
B
E, F
SL
Capacitance Change
WCthCꢃ ±±0%
Capacitance
Change
WCthCꢃ ±±5%
WCthCꢃ ± 5%
Humidity
(Under
Steady
State)
Set the capacCtor for 500±±1 hrꢀs at ꢁ0±1ꢂ2 Cꢃ n0 to n5%
relatCve humCdCtys
Char.
B, E
F
Specifications
12
<
DsFs 5s0%
=
Poꢀt-treatmeꢃt:
D.F.
Q
<
DsFs 7s5%
=
2apacCtor ꢀhould be ꢀtored for ± to 1 hrꢀs at room coꢃdCtCoꢃs*1
±
>
Q 175+5/12* ꢄ2<30pFꢅ
=
SL
>
>
Q 350
ꢄ2 30pFꢅ
=
=
I.R.
3000MΩ mCꢃs
Per Item 6
Dielectric
Strength
Appearance
No marked defect
Char.
B
E, F
SL
Capacitance Change
WCthCꢃ ±±0%
Capacitance
Change
WCthCꢃ ±±5%
WCthCꢃ ± 5%
Apply the rated voltage for 500±±1 hrꢀs at ꢁ0±1ꢂ2 Cꢃ n0 to
n5% relatCve humCdCtys
Humidity
Loading
Char.
B, E
F
Specifications
13
<
DsFs 5s0%
Poꢀt-treatmeꢃt:
=
D.F.
Q
<
DsFs 7s5%
2apacCtor ꢀhould be ꢀtored for ± to 1 hrꢀs at room coꢃdCtCoꢃs*1
=
±
>
Q 175+5/12* ꢄ2<30pFꢅ
=
SL
>
>
=
Q 350
ꢄ2 30pFꢅ
=
I.R.
3000MΩ mCꢃs
Per Item 6
Dielectric
Strength
*± "2" expreꢀꢀeꢀ ꢃomCꢃal capacCtaꢃce value ꢄpFꢅs
*1 "Room coꢃdCtCoꢃ" Temperature: ±5 to 35ꢂ2, RelatCve humCdCty: ꢁ5 to 75%, AtmoꢀpherCc preꢀꢀure: 86 to ±06kPa
2oꢃtCꢃued oꢃ the followCꢃg pages
12
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KY/KX Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
Test Method
No marked defect
Within 20%
Impulse Voltage
Each individual capacitor should be subjected to a 5kV (Type
KX: 8kV) impulses for three times. Then the capacitors are
Capacitance
Change
applied to life test.
100 (%)
I.R.
3000MΩ min.
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
90
50
30
0
t
T
T1
14 Life
T2
Apply a voltage from Table 4 for 1000 hrs. at 125+2/-0°C, and
relative humidity of 50% max.
Dielectric
Strength
Per Item 6
<Table 4>
Applied Voltage
170% of Rated Voltage except that once each hour the
voltage is increased to AC1000V(r.m.s.) for 0.1 sec.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition.*2
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10 1 sec.
Tensile
Robustness
15 of
Terminations
W
Lead wire should not be cut off. Capacitor should
not be broken.
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. aꢀer the last discharge.
R
F
L1
L2
S1
C1
S2 UAC
C2
L3
C3
L4
Cx
Ct
Ut
Tr
Oscilloscope
16 Active Flammability
The cheesecloth should not be on fire.
C1,2 : 1μF 10%
C3
: 0.033μF 5% 10kV
L1 to 4 : 1.5mH 20% 16A Rod core choke
Ct
Cx
F
: 3μF 5% 10kV
: Capacitor under test
: Fuse, Rated 10A
R
: 100Ω 2%
: UR 5%
: Rated Voltage
: Voltage applied to Ct
UAC
UR
Ut
Ux
5kV
time
*2 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
13
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KY/KX Specifications and Test Methods
Continued ꢂrom the preceding page.
No. Item
Specifications
Test Method
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time oꢂ exposure to flame:
31 sec.
Length oꢂ flame : ±ꢀ±±mm
Gas burner
Gas
: Length 3ꢁmm min.
Inside Dia.
1.ꢁ±1.±mm
Outside Dia. 1.9mm max.
: Butane gas Purity 9ꢁ0 min.
The burning time should not exceed 31 sec.
The tissue paper should not ignite.
17 Passive Flammability
Test Specimen
4ꢁ°
Tissue
About ±1mm Thick Board
Appearance
No marked deꢂect
The capacitor should be subjected to ꢁ temperature cycles,
then consecutively to ꢀ immersion cycles.
Char.
B
E, F
SL
Capacitance Change
Within ±±10
<Temperature Cycle>
Capacitance
Change
Within ±ꢀ10
Within ± ꢁ0
Step
Temperature (ºC)
-41+1/-3
Room temp.
±ꢀꢁ+3/-1
Time (min)
±
ꢀ
3
4
31
3
31
3
Char.
B, E
F
Specifications
Room temp.
<
D.F. ꢁ.10
=
D.F.
Q
Cycle time: ꢁ cycles
<
D.F. 7.ꢁ0
=
±
>
Q ꢀ7ꢁ+ꢁ/ꢀC* (C<31pF)
=
Temperature
and
Immersion
Cycle
SL
>
>
=
Q 3ꢁ1
(C 31pF)
=
<Immersion Cycle>
18
Time
Immersion
Water
I.R.
3111MΩ min.
Step
Temperature (ºC)
(min)
Clean
±
ꢀ
6ꢁ+ꢁ/-1
1±3
±ꢁ
water
Salt
water
±ꢁ
Cycle time: ꢀ cycles
Dielectric
Strength
Per Item 6
Pre-treatment:
Capacitor should be stored at 8ꢁ±ꢀ2C ꢂor ± hr., then placed at
room condition*ꢀ ꢂor ꢀ4±ꢀ hrs.
Post-treatment:
Capacitor should be stored ꢂor ꢀ4±ꢀ hrs. at room condition.*ꢀ
*± "C" expresses nominal capacitance value (pF).
*ꢀ "Room condition" Temperature: ±ꢁ to 3ꢁ°C, Relative humidity: 4ꢁ to 7ꢁ0, Atmospheric pressure: 86 to ±16kPa
14
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
AC250V Ceramic Capacitor Non Safety Certified Type
DEJ Series (Based on the Electrical Appliance and Material Safety Law of Japan)
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
Features
1. This type is based on the electrical appliance and
material safety law of Japan (separated table 4).
2. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
e
Please contact us when a halogen-free product*
is necessary.
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
F
1.0
ød
3
(in mm)
Lead Code Coating Extension e
ød
Style
[Bulk]
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
A3
C3
Vertical Crimp Long (A3)
Straight Long (C3)
3.0 max.
0.6 0.0ꢀ Fig. 2
3. Taping available for automatic insertion.
Applications
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
Ideal for use on AC line filters and primary-secondary
coupling for switching power supplies and AC adapters.
e
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
ød
F
0.ꢁ
(in mm)
Lead Code Coating Extension e
ød
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
3.0 max. 0.6 0.0ꢀ Fig. 2
Style
[Bulk]
B3
D3
Vertical Crimp Short (B3)
Straight Short (D3)
Marking
Temp. Char.
E, F
102Z
2ꢀ0~
16
ø7-8mm
332Z
2ꢀ0~
16
ø9-11mm
Marked with 3 figures
Marked with code
Marked with code
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Marked with
Manufacturer's
Identification
(omitted for nominal body diameter øꢁmm and under)
Manufactured Date Code
Abbreviation
Lead
Spacing F
(mm)
Lead
Lead
Lead
Lead
AC Rated
Voltage
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Package
Package Package
Long Bulk Short Bulk Taping (1) Taping (2)
DEJE3E2102Z
DEJE3E2222Z
DEJE3E2332Z
DEJE3E2472Z
DEJF3E2472Z
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
E
E
E
E
F
F
1000pF+80/-20%
2200pF+80/-20%
3300pF+80/-20%
4700pF+80/-20%
4700pF+80/-20%
7.0mm max.
8.0mm max.
9.0mm max.
11.0mm max.
8.0mm max.
7.5
7.5
7.5
7.5
7.5
7.5
4.0mm max.
4.0mm max.
4.0mm max.
4.0mm max.
4.0mm max.
4.0mm max.
C3B
A3B
A3B
A3B
A3B
A3B
D3B
B3B
B3B
B3B
B3B
B3B
N2A
N2A
N2A
N2A
N2A
N2A
P3A
N3A
N3A
N3A
N3A
N3A
ppp
ppp
ppp
ppp
ppp
ppp
DEJF3E2103Z
10000pF+80/-20% 11.0mm max.
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Taping (1): Lead spacing F=5.0mm, Taping (2): Lead spacing F=7.5mm.
15
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
Operating Temperature Range: -25 to +85°C
No.
Item
Specifications
Test Method
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
No visible defect, and dimensions are within
specified range.
1
Appearance and Dimensions
2
3
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitance should be measured at 20ꢀC with 1 0.1kHꢁ
and AC5V(r.m.s.) max.
Capacitance
Within specified tolerance
Char.
E
F
Specifications
Dissipation Factor
(D.F.)
The dissipation factor should be measured at 20ꢀC with
1 0.1kHꢁ and AC5V(r.m.s.) max.
<
D.F. 2.5%
=
4
5
<
D.F. 5.0%
=
3
The insulation resistance should be measured with
DC500 50V within 60 5 sec. of charging.
Insulation Resistance (I.R.)
10000MΩ min.
No failure
Between Lead
Wires
The capacitor should not be damaged when AC1500V(r.m.s.)
are applied between the lead wires for 60 sec.
First, the terminals of the capacitor should be connected
together. Then, as shown in the figure at right,
the capacitor should be immersed
Dielectric
Strength
6
into 10% salt solution up to a position
of about 3 to 4mm apart from the
terminals.
Body
Insulation
About
No failure
3 to 4mm
Electrode
Plate
10% Salt Solution
Finally, AC1500V(r.m.s.) is applied
for 60 sec. between the capacitor lead
wires and electrode plate.
The capacitance measurement should be made at each step
specified in Table 1.
<Table 1>
Char.
E
F
Capacitance Change
Step
1
2
Temperature (ºC)
20 2
+20
–55
7
Temperature Characteristics
Within
Within
%
%
+30
–80
-25 2
20 2
3
4
5
85 2
20 2
Appearance
I.R.
No marked defect
1000MΩ min.
As in Figure 1, discharge is made 50 times at 5 sec. intervals
from the capacitor (Cd) charged at DC voltage of specified.
R3
S
R1
Vs
Ct
R2
Cd
Discharge
Test
8
Dielectric
Strength
Fig.1
Per Item 6
Ct: Capacitor under test
S: High-voltage switch
R1: 1000Ω
R2: 100MΩ
R3: Surge resistance
Cd
Vs
0.001μF
DC10kV
The lead wire of a capacitor should be dipped into molten
solder for 2 0.5 sec.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245 5ꢀC
H63 Eutectic Solder 235 5ꢀC
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the
circumferential direction.
9
Solderability of Leads
Continued on the following page.
16
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
Continued from the preceding page.
No. Item
Appearance
I.R.
Specifications
Test Method
No marked defect
1000MΩ min.
As shown in the figure, the lead
wires should be immersed in
solder of ꢀ50±10°C up to 1.5 to
±.0mm from the root of terminal
for ꢀ.5±0.5 sec.
Capacitor
1.5
Thermal
Screen
to ±.0mm
Molten
Solder
Soldering
10 Effect
Pre-treatment:
(Non-Preheat) Dielectric
Strength
Capacitor should be stored at 85±±°C for 1 hr., then placed at
room condition*1 for ±4±± hrs. before initial measurements.
Post-treatment:
Per Item 6
Capacitor should be stored for 4 to ±4 hrs. at room
condition.*1
Appearance
I.R.
No marked defect
1000MΩ min.
First the capacitor should be
stored at 1±0+0/-5°C for
60+0/-5 sec.
Then, as in the figure, the lead
wires should be immersed in
solder of ±60+0/-5°C up to 1.5
to ±.0mm from the root of
terminal for 7.5+0/-1 sec.
Pre-treatment:
Capacitor
1.5
Thermal
Screen
3
to ±.0mm
Molten
Solder
Soldering
11 Effect
(On-Preheat) Dielectric
Strength
Per Item 6
Capacitor should be stored at 85±±°C for 1 hr., then placed at
room condition*1 for ±4±± hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to ±4 hrs. at
room condition.*1
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz.
Apply for a total of 6 hrs., ± hrs. each in ꢀ mutually perpendicular
directions.
Capacitance
Within the specified tolerance
Vibration
Resistance
D.F.
12
13
Char.
E
F
Specifications
<
D.F. ±.5%
=
<
D.F. 5.0%
=
Solvent
The capacitor should be immersed into a isopropyl alcohol for
ꢀ0±5 sec.
Appearance
Resistance
No marked defect
No marked defect
Appearance
Char.
E
F
Capacitance Change
Within ±±0%
Capacitance
Change
Set the capacitor for 500±1± hrs. at 40±±°C in 90 to 95%
relative humidity.
Pre-treatment:
Within ±ꢀ0%
Humidity
(Under
14
Char.
E
F
Specifications
Capacitor should be stored at 85±±°C for 1 hr., then placed at
room condition*1 for ±4±± hrs. before initial measurements.
Post-treatment:
Steady
<
D.F.
D.F. 5.0%
=
State)
<
D.F. 7.5%
=
Capacitor should be stored for 1 to ± hrs. at room condition.*1
I.R.
1000MΩ min.
Per Item 6
Dielectric
Strength
Appearance
No marked defect
Char.
E
F
Capacitance Change
Within ±±0%
Capacitance
Change
The capacitor should be subjected to 40±±°C, relative humidity
of 90 to 98% for 8 hrs., and then removed in room temperature
for 16 hrs. until 5 cycles are completed.
Within ±ꢀ0%
Humidity
Insulation
Pre-treatment:
15
Char.
E
F
Specifications
Capacitor should be stored at 85±±°C for 1 hr., then placed at
room condition*1 for ±4±± hrs. before initial measurements.
Post-treatment:
<
D.F. 5.0%
=
D.F.
<
D.F. 7.5%
=
Capacitor should be stored for 1 to ± hrs. at room condition.*1
I.R.
1000MΩ min.
Per Item 6
Dielectric
Strength
*1 "Room condition" Temperature: 15 to ꢀ5°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
17
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEJ Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
Test Method
No marked defect
Char.
E
F
Capacitance Change
Within 20%
Capacitance
Change
Apply the rated voltage for 500 12 hrs. at 40 2°C in 90 to
95% relative humidity.
Within 30%
Pre-treatment:
Humidity
Loading
16
Char.
E
F
Specifications
Capacitor should be stored at 85 2°C for 1 hr., then placed at
room condition*1 for 24 2 hrs. before initial measurements.
Post-treatment:
<
D.F.
I.R.
D.F. 5.0%
=
<
D.F. 7.5%
=
Capacitor should be stored for 1 to 2 hrs. at room condition.*1
1000MΩ min.
Per Item 6
Dielectric
Strength
3
Appearance
No marked defect
Apply a voltage from Table 2 for 1500 hrs. at 85 2°C, relative
humidity 50% max.
Char.
E
F
Capacitance Change
Within 20%
<Table 2>
Capacitance
Change
Applied Voltage
AC500V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1 sec.
Within 30%
17 Life
I.R.
1000MΩ min.
Pre-treatment:
Capacitor should be stored at 85 2°C for 1 hr., then placed at
room condition*1 for 24 2 hrs. before initial measurements.
Post-treatment:
Dielectric
Strength
Per Item 6
Capacitor should be stored for 4 to 24 hrs. at room condition.*1
The capacitor should be subjected
to applied flame for 15 sec. and then
removed for 15 sec. until 3 cycles
are completed.
Capacitor
Flame
The capacitor flame discontinued as follows.
Cycle
1 to 2
3
Time (sec.)
15 max.
60 max.
18 Flame Test
Gas Burner: Inside Dia. 9.5
(in mm)
As shown in the figure at right, fix the body of the
capacitor, apply a tensile weight gradually to
each lead wire in the radial direction of the
capacitor up to 10N and keep it for 10 1 sec.
Tensile
W
Robustness
19 of
Lead wire should not be cut off. Capacitor should
not be broken.
Terminations
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Bending
Appearance
No marked defect
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Char.
E
F
Capacitance Change
Within 20%
Capacitance
Change
<Temperature Cycle>
Within 30%
Step
Temperature (ºC)
-25+0/-3
Room temp.
85+3/-0
Time (min)
1
2
3
4
30
3
30
3
Char.
E
F
Specifications
<
D.F. 5.0%
=
D.F.
I.R.
Room temp.
<
D.F. 7.5%
=
Cycle time: 5 cycles
Temperature
1000MΩ min.
<Immersion Cycle>
and
20
Immersion
Time
Immersion
Water
Step
Temperature (ºC)
Cycle
(min)
Clean
1
2
65+5/-0
0 3
15
water
Salt
water
15
Dielectric
Strength
Per Item 6
Cycle time: 2 cycles
Pre-treatment:
Capacitor should be stored at 85 2ꢀC for 1 hr., then placed at
room condition*1 for 24 2 hrs.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at room condition.*1
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
18
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
Capacitance - Temperature Characteristics
40
20
SL
0
B
B
SL
-20
-40
E
-60
F
E
-80
F
-100
-40
-20
0
20
40
60
80
100
120
140
Temperature (°C)
Insertion Loss - Frequency Characteristics
Type KY
Type KX New Small Size
0
0
10
20
30
40
50
10
20
(1)
(2)
(1)
(3)
30
(2)
(4)
(3)
(4)
(5)
(5)
(6)
40
(6)
(7)
50
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Type KY
(1) DE2B3KY101KA2B****
(2) DE2B3KY221KA2B****
(3) DE2B3KY471KA2B****
(4) DE2E3KY102MA2B****
(5) DE2E3KY222MA2B****
(6) DE2E3KY472MA2B****
(7) DE2F3KY103MA3B****
Type KX New Small Size
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
(1) DE1B3KX101KA4BN01F
(2) DE1B3KX221KA4BN01F
(3) DE1B3KX471KA4BN01F
(4) DE1E3KX102MA4BN01F
(5) DE1E3KX222MA4BN01F
(6) DE1E3KX472MA4BN01F
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
19
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Characteristics Data (Typical Example)
Leakage Current Characteristics
Type KY (B char.)
Type KY (E,F char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
1.0
0.8
0.6
0.4
0.2
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
1000
2000
3000
0
1000
2000
3000
AC voltage [V(r.m.s.)]
AC voltage [V(r.m.s.)]
Type KX New Small Size (B char.)
Type KX New Small Size (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
1.0
0.8
0.6
0.4
0.2
0.0
4.0
3.0
2.0
1.0
0.0
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
20
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Packaging
Taping Specifications
12.7mm pitch / lead spacing 5mm taping
15mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N2)
Vertical crimp type
(Lead Code: Nꢀ)
ΔS
ΔS
D
P2
P
P2
P
D
ød
ød
P1
P1
F
F
øD0
øD0
P0
P0
ꢀ0mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N7)
15mm pitch / lead spacing 7.5mm taping
Straight type
(Lead Code: Pꢀ)
ΔS
P2
P
D
P2
ΔS
P
D
ød
P1
F
ød
P1
F
øD0
P0
øD0
P0
25.4mm pitch / lead spacing 10.0mm taping
Vertical crimp type
O
Δh1
Δh2
*
*
*
(Lead Code: N4, N5)
T max.
Marked side
ꢀ.0 max.
H0
4.0 max.
H0
Lead Code
N5
P
ΔS
D
*
Lead Code
N2, Nꢀ, N4, N7
Lead Code
Pꢀ
P1
ød
F
t2
t1
øD0
P0
N5
Item
Code
N2
N3
P3
N7
ꢀ0.0 2.0
N4
P
P0
F
12.7 1.0
15.0 2.0
15.0 0.ꢀ
25.4 2.0
12.7 0.ꢀ
10.0 1.0
—
Pitch of component
Pitch of sprocket hole
Lead spacing
12.7 0.ꢀ
+0.8
5.0
7.5 1.0
7.5 1.5
–0.2
P2
P1
D
6.ꢀ5 1.ꢀ
ꢀ.85 0.7
Length from hole center to component center
Length from hole center to lead
Body diameter
ꢀ.75 1.0
7.7 1.5
See the individual product specifications.
ΔS
W
W1
H0
H
0 1.0
0 2.0
18.0 0.5
Deviation along tape, leꢀ or right
Carrier tape width
9.0 0.5
Position of sprocket hole
Lead distance between reference
and bottom planes
+2.0
+2.0
–
18.0
18.0
–0
–0
+1.5
–
–
20.0
–1.0
+0.5 to -1.0
Protrusion length
øD0
ød
t1
4.0 0.1
Diameter of sprocket hole
Lead diameter
+0.1
0.6
0.6 0.05
–0.05
0.6 0.ꢀ
Total tape thickness
t2
1.5 max.
Total thickness, tape and lead wire
Body thickness
T
See the individual product specifications.
+0
11.0
–1.0
L
Portion to cut in case of defect
Hold down tape width
W0
W2
e
11.5 min.
1.5 1.5
Hold down tape position
Coating extension on lead
Deviation across tape, front
Deviation across tape, rear
Up to the end of crimp
1.0 max.
ꢀ.0 max.
Up to the end of crimp
Δh1
Δh2
2.0 max.
(in mm)
Continued on the following page.
21
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Packaging
Continued from the preceding page.
Packaging Styles
Bulk
Taping
Polyethylene Bag
Ammo Pack
Minimum Quantity (Order in Sets Only)
[Bulk]
(pcs./Bag)
Lead Code
Ap, Cp
Lead Code
Bp, Dp
Body Dia. D
(mm)
Long
Short
500
500
250
200
7
250 *
250
200
100
Type KY
8 to 11
12 to 14
15, 16
Type KX (New Small Size)
DEJ Series
* Lead Spacing F=5.0mm (Code: A2): 500pcs.
[Taping]
(pcs./Ammo Pack)
Lead Code
N2
1,000
–
N3, P3
900
N4, N5, N7
–
500
–
Type KY
–
Type KX (New Small Size)
DEJ Series
1,500
1,000
22
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Caution
!
Caution (Rating)
!
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p that contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes
these irregular voltages.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature and Self-generated Heat
(Apply to B/E/F Char.)
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected to an atmospheric temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's
characteristics and reliability. (Never attempt to perform
measurement with the cooling fan running. Otherwise,
accurate measurement cannot be ensured.)
3. Test Condition for Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.
23
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Caution
!
Continued from the preceding page.
(2) Voltage Applied Method
When the withstanding voltage is applied, the capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, test
voltage should be applied with the zero cross.* At the
end of the test time, the test voltage should be reduced
to near zero, and then capacitor's lead or terminal should
be taken off the output of the withstanding voltage test
equipment.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, the surge
voltage may rise, and therefore, a defect may be caused.
Voltage sine wave
zero cross
0V
*ZERO CROSS is the point where voltage sine wave
passes 0V. See the figure at right.
4. Fail-Safe
When the capacitor is broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fuming.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
24
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Caution
!
Caution (Storage and Operating Condition)
!
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
Use capacitors within 6 months after delivery.
Check the solderability after 6 months or more.
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. Also, avoid exposure to
moisture. Before cleaning, bonding, or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Caution (Soldering and Mounting)
!
1. Vibration and Impact
3. Bonding, Resin Molding and Coating
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
Please confirm there is no influence of holding
measures on the product with the intended equipment.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specifications of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
For bonding, molding or coating this product, verify
that these processes do not affect the quality of the
capacitor by testing the performance of the bonded,
molded or coated product in the intended equipment.
When the amount of applications, dryness/hardening
conditions of adhesives and molding resins containing
organic solvents (ethyl acetate, methyl ethyl ketone,
toluene, etc). are unsuitable, the outer coating resin
of a capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding resin
or coating may cause outer coating resin cracking
and/or ceramic element cracking of a capacitor in a
temperature cycling.
4. Treatment after Bonding, Resin Molding and Coating
When the outer coating is hot (over 100 degrees C.)
after soldering, it becomes soft and fragile.
Therefore, please be careful not to give it mechanical
stress.
Soldering the capacitor with a soldering iron should
be performed in the following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Soldering time: 3.5 sec. max.
Caution (Handling)
!
Vibration and Impact
Please confirm there is no influence of holding
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
measures on the product with the intended equipment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
25
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors Notice
Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
Notice (Rating)
1. Capacitance Change of Capacitors
(1) For SL char.
Capacitance might change a little depending on a
surrounding temperature or an applied voltage.
Please contact us if you use a strict constant time
circuit.
2. Performance Check by Equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 (B/E/F char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance, so the capacitance value may change
depending on the operating condition in the
equipment. Therefore, be sure to confirm the
apparatus performance of receiving influence in
the capacitance value change of a capacitor,
such as leakage current and noise suppression
characteristic.
(2) For B/E/F char.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
change greatly depending on the surrounding
temperature or an applied voltage. Therefore,
it is not likely to be suitable for use in a constant
time circuit.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
Please contact us if you need detailed information.
26
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors
DEH Series (125°C Guaranteed/Low-dissipation Factor/DC2kV, 3.15kV)
<Fig. 1>
<Fig. 2>
D max.
T max.
T max.
Features
1. Reduced heat dissipation permitted due to small
dielectric loss of the ceramic material.
2. Operating temperature range is guaranteed up to 125
degrees C.
e
3. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
Please contact us when a halogen-free product*
is necessary.
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
F
1.0
ød
(in mm)
[Bulk]
Lead Code Coating Extension e
ød
Style
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
A2, A3, A4
C3
3.0 max.
0.6 0.0ꢀ Fig. 2
4. Taping available for automatic insertion.
4
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
Applications
Ideal for use on high-frequency pulse circuits such as
a horizontal resonance circuit for CTV and snubber
circuits for switching power supplies.
e
ød
F
0.ꢁ
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
(in mm)
Lead Code Coating Extension e
ød
Style
[Bulk]
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
B2, B3, B4
D3
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
3.0 max.
0.6 0.0ꢀ Fig. 2
Marking
Rated Voltage
DC2kV, 3.15kV
Nominal
Body Diameter
Temp. Char.
R
HR R
102K
ø7-9mm
2KV 66
HR R
272K
3KV
66
ø10-21mm
High Temperature Guaranteed Code
Temperature Characteristics
Nominal Capacitance
HR
Marked with code (omitted for nominal body diameter ø6mm)
Marked with 3 figures
Capacitance Tolerance
Marked with code (omitted for nominal body diameter ø6mm)
Marked with code (for DC3.1ꢀkV, marked with 3KV)
Rated Voltage
Manufacturer's Identification
Manufactured Date Code
Marked with
Abbreviation
(omitted for nominal body diameter ø9mm and under)
27
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May ±7,20±6
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DC2-3.15kV, R Characteristics
Lead
Spacing F
(mm)
Lead
Lead
Lead
DC Rated
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Long Bulk
Package
Short Bulk
Package
Taping
Voltage
DEHR33D221K
DEHR33D271K
DEHR33D331K
DEHR33D391K
DEHR33D471K
DEHR33D561K
DEHR33D681K
DEHR33D821K
DEHR33D102K
DEHR33D122K
DEHR33D152K
DEHR33D182K
DEHR33D222K
DEHR33D272K
DEHR33D332K
DEHR33D392K
DEHR33D472K
DEHR33F151K
DEHR33F181K
DEHR33F221K
DEHR33F271K
DEHR33F331K
DEHR33F391K
DEHR33F471K
DEHR33F561K
DEHR33F681K
DEHR33F821K
DEHR33F102K
DEHR33F122K
DEHR33F152K
DEHR33F182K
DEHR33F222K
DEHR33F272K
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
3±50Vdc
220pF±±0ꢀ
270pF±±0ꢀ
330pF±±0ꢀ
390pF±±0ꢀ
470pF±±0ꢀ
560pF±±0ꢀ
680pF±±0ꢀ
820pF±±0ꢀ
±000pF±±0ꢀ
±200pF±±0ꢀ
±500pF±±0ꢀ
±800pF±±0ꢀ
2200pF±±0ꢀ
2700pF±±0ꢀ
3300pF±±0ꢀ
3900pF±±0ꢀ
4700pF±±0ꢀ
±50pF±±0ꢀ
±80pF±±0ꢀ
220pF±±0ꢀ
270pF±±0ꢀ
330pF±±0ꢀ
390pF±±0ꢀ
470pF±±0ꢀ
560pF±±0ꢀ
680pF±±0ꢀ
820pF±±0ꢀ
±000pF±±0ꢀ
±200pF±±0ꢀ
±500pF±±0ꢀ
±800pF±±0ꢀ
2200pF±±0ꢀ
2700pF±±0ꢀ
7.0mm max.
7.0mm max.
8.0mm max.
8.0mm max.
9.0mm max.
9.0mm max.
±0.0mm max.
±±.0mm max.
±2.0mm max.
±2.0mm max.
±2.0mm max.
±4.0mm max.
±5.0mm max.
±7.0mm max.
±9.0mm max.
20.0mm max.
2±.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
8.0mm max.
9.0mm max.
±0.0mm max.
±0.0mm max.
±±.0mm max.
±2.0mm max.
±3.0mm max.
±4.0mm max.
±5.0mm max.
±6.0mm max.
±7.0mm max.
±9.0mm max.
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
±0.0
±0.0
±0.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
±0.0
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
C3B
C3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A4B
A4B
A4B
C3B
C3B
C3B
C3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A4B
D3B
D3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B4B
B4B
B4B
D3B
D3B
D3B
D3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B4B
P3A
P3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N7A
N7A
N7A
-
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
4
-
-
P3A
P3A
P3A
P3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N7A
N7A
N7A
N7A
-
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
28
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-ꢂ5 to +±ꢂ5ꢀ°
No visible defeꢄt. and dimensions are
within sꢁeꢄified range1
The ꢄaꢁaꢄitor should be visuallꢃ insꢁeꢄted for evidenꢄe of
defeꢄt1 Dimensions should be measured with slide ꢄaliꢁers1
2
3
Appearance and Dimensions
Marking
To be easilꢃ legible
The ꢄaꢁaꢄitor should be visuallꢃ insꢁeꢄted1
The ꢄaꢁaꢄitor should not be damaged when D° voltage of
ꢂ00ꢅ of the rated voltage is aꢁꢁlied between the lead wires
for ± to 5 seꢄ1
Between Lead
Wires
No failure
<
(°harge/Disꢄharge ꢄurrent 50mA)
=
The ꢄaꢁaꢄitor is ꢁlaꢄed in the ꢄontainer with
metal balls of diameter ±mm so that eaꢄh
lead wire. short ꢄirꢄuited. is keꢁt about ꢂmm
off the metal balls as shown in the figure at
right. and A°±ꢂ50ꢆ(r1m1s1) <50/60Hz> is
aꢁꢁlied for ± to 5 seꢄ1 between ꢄaꢁaꢄitor
lead wires and metal balls1
Dielectric
Strength
4
Body Insulation
No failure
About ꢂmm
Metal balls
<
(°harge/Disꢄharge ꢄurrent 50mA)
=
Insulation
Between Lead
Wires
The insulation resistanꢄe should be measured with
D°500±50ꢆ within 60±5 seꢄ1 of ꢄharging1
5
6
7
±0000MΩ min1
4
Resistance (I.R.)
The ꢄaꢁaꢄitanꢄe should be measured at ꢂ0ꢀ° with ±±01ꢂkHz
and A°5ꢆ(r1m1s1) max1
Capacitance
Within sꢁeꢄified toleranꢄe
°har1 R: 01ꢂꢅ max1
The dissiꢁation faꢄtor should be measured at ꢂ0ꢀ° with
±±01ꢂkHz and A°5ꢆ(r1m1s1) max1
Dissipation Factor (D.F.)
The ꢄaꢁaꢄitanꢄe measurement should be made at eaꢄh steꢁ
sꢁeꢄified in the Table1
Temp. Char.
T. C.
-25 to +85°C +85 to +125°C
R
Within ±±5ꢅ Within +±5/-30ꢅ
8
Temperature Characteristics
Pre-treatment: °aꢁaꢄitor should be stored at ±ꢂ5±3ꢀ° for ± hr1. then ꢁlaꢄed at
room ꢄondition* for ꢂ4±ꢂ hrs1 before measurements1
Step
Temp. (°C)
±
ꢂ0±ꢂ
ꢂ
3
ꢂ0±ꢂ
4
5
ꢂ0±ꢂ
-ꢂ5±3
±ꢂ5±ꢂ
As shown in the figure at right. fix the bodꢃ of
the ꢄaꢁaꢄitor and aꢁꢁlꢃ a tensile weight
graduallꢃ to eaꢄh lead wire in the radial
direꢄtion of the ꢄaꢁaꢄitor uꢁ to ±0N (5N for
lead diameter 015mm). and keeꢁ it for ±0±±
seꢄ1
Pull
W
Lead wire should not be ꢄut off1
°aꢁaꢄitor should not be broken1
9
Strength of Lead
Eaꢄh lead wire should be subjeꢄted to 5N (ꢂ15N for lead
diameter 015mm) of weight and bent 90ꢀ at the ꢁoint of egress.
in one direꢄtion. then returned to its original ꢁosition and bent
90ꢀ in the oꢁꢁosite direꢄtion at the rate of one bend in ꢂ to 3
seꢄ1
Bending
Appearance
No marked defeꢄt
The ꢄaꢁaꢄitor should be firmlꢃ soldered to the suꢁꢁorting lead
wire and vibrated at a frequenꢄꢃ range of ±0 to 55Hz. ±15mm in
total amꢁlitude. with about a ±-minute rate of vibration ꢄhange
from ±0Hz to 55Hz and baꢄk to ±0Hz1 Aꢁꢁlꢃ for a total of 6
hrs1. ꢂ hrs1 eaꢄh in 3 mutuallꢃ ꢁerꢁendiꢄular direꢄtions1
Vibration
Resistance
Capacitance
Within sꢁeꢄified toleranꢄe
10
D.F.
°har1 R: 01ꢂꢅ max1
The lead wire of a ꢄaꢁaꢄitor should be diꢁꢁed into a ethanol
solution of ꢂ5wtꢅ rosin and then into molten solder for ꢂ±015
seꢄ1 In both ꢄases the deꢁth of diꢁꢁing is uꢁ to about ±15 to
ꢂmm from the root of lead wires1
Temꢁ1 of solder: Lead Free Solder (Sn-3Ag-015°u) ꢂ45±5ꢀ°
H63 Euteꢄtiꢄ Solder ꢂ35±5ꢀ°
Lead wire should be soldered with
uniform ꢄoating on the axial direꢄtion
over 3/4 of the ꢄirꢄumferential direꢄtion1
11 Solderability of Leads
Appearance
No marked defeꢄt
Within ±±0ꢅ
The lead wire should be immersed into the melted solder of
350±±0ꢀ° uꢁ to about ±15 to ꢂmm from the main bodꢃ for
315±015 seꢄ1
Capacitance
Change
Soldering Effect
(Non-Preheat)
Pre-treatment:
12
°aꢁaꢄitor should be stored at ±ꢂ5±3ꢀ° for ± hr1. then ꢁlaꢄed
at room ꢄondition* for ꢂ4±ꢂ hrs1 before initial measurements1
Post-treatment:
Dielectric Strength
(Between Lead
Wires)
Per item 41
°aꢁaꢄitor should be stored for ꢂ4±ꢂ hrs1 at room ꢄondition1*
*±
"Room ꢄondition" Temꢁerature: ±5 to 35ꢀ°. Relative humiditꢃ: 45 to 75ꢅ. Atmosꢁheriꢄ ꢁressure: 86 to ±06kPa
°ontinued on the following ꢁage1
29
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEH Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Capacitor
1.5
Thermal
Screen
Capacitance
Change
Within 10%
Per item 4.
Then, as in the figure, the lead
ꢀires should be immersed in
solder of 260+0/-5°C up to 1.5
to 2.0mm from the root of
terminal for 7.5+0/-1 sec.
Pre-treatment:
Capacitor should be stored at 125 3°C for 1 hr., then placed
at room condition* for 24 2 hrs. before initial measurements.
Post-treatment:
to 2.0mm
Molten
Solder
Soldering Effect
(On-Preheat)
13
Dielectric Strength
(Between Lead
Wires)
Capacitor should be stored for 24 2 hrs. at room condition.*
Appearance
No marked defect
Within 10%
The capacitor should be subjected to 5 temperature cycles.
<Temperature Cycle>
Capacitance
Change
Step Temperature (°C) Time (min)
1
2
3
4
-25 3
Room Temp.
125 3
30
3
30
3
D.F.
I.R.
0.4% max.
Temperature
Cycle
1000MΩ min.
4
14
Room Temp.
Cycle time: 5 cycles
Pre-treatment:
Dielectric Strength
(Between Lead
Wires)
Capacitor should be stored at 125 3°C for 1 hr., then placed
at room condition* for 24 2 hrs. before initial measurements.
Post-treatment:
Per item 4.
Capacitor should be stored for 24 2 hrs. at room condition.*
Appearance
No marked defect
Within 10%
Set the capacitor for 500 +24/-0 hrs. at 40 2°C in ꢁ0 to ꢁ5%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125 3°C for 1 hr., then placed
at room condition* for 24 2 hrs. before initial measurements.
Post-treatment:
Capacitance
Change
Humidity (Under
Steady State)
15
16
D.F.
0.4% max.
I.R.
1000MΩ min.
No marked defect
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Appearance
Apply the rated voltage for 500+24/-0 hrs. at 40 2°C in ꢁ0 to
<
ꢁ5% relative humidity. (Charge/Discharge current 50mA)
=
Capacitance
Change
Pre-treatment:
Within 10%
Humidity
Loading
Capacitor should be stored at 125 3°C for 1 hr., then placed
at room condition* for 24 2 hrs. before initial measurements.
Post-treatment:
D.F.
0.6% max.
I.R.
1000MΩ min.
No marked defect
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Appearance
Apply a DC voltage of 150% of the rated voltage for 1000
+48/-0 hrs. at 125 2°C ꢀith a relative humidity of 50% max.
Capacitance
Change
<
(Charge/Discharge current 50mA)
Within 10%
0.4% max.
=
Pre-treatment:
17 Life
Capacitor should be stored at 125 3°C for 1 hr., then placed
at room condition* for 24 2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored at 125 3°C for 1 hr., then placed
at room condition* for 24 2 hrs.
D.F.
I.R.
2000MΩ min.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
30
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors
DEA Series (125°C Guaranteed/Class 1/DC2k-3.15kV)
<Fig. 1>
T max.
<Fig. 2>
D max.
T max.
Features
1. Temperature compensating type ceramics realize lower
e
heat dissipation than DEH series.
2. Operating temperature range is guaranteed up to 125
degrees C.
3. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
Please contact us when a halogen-free product*
is necessary.
F
1.0
ød
(in mm)
Lead Code Coating Extension e
ød
Style
[Bulk]
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
A2, A3
C1, CD
C3
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
3.0 max.
3.0 max.
0.ꢀ 0.0ꢀ Fig. 2
0.6 0.0ꢀ Fig. 2
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
4. Taping available for automatic insertion.
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
Applications
1. Ideal for use as the ballast in backlighting
inverters for liquid crystal display.
e
2. Ideal for use on high-frequency pulse circuits such
as a horizontal resonance circuit for CTV and snubber
circuits for switching power supplies.
5
ød
F
0.ꢁ
(in mm)
Lead Code Coating Extension e
ød
Style
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
B2, B3
D1, DD
D3
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
[Bulk]
3.0 max.
3.0 max.
0.ꢀ 0.0ꢀ Fig. 2
0.6 0.0ꢀ Fig. 2
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
Marking
Temp. Char.
SL
Nominal Body Diameter
6ꢁ
ø4.5-5mm
ø6mm
2KV
39
3KV
66
1ꢁ1J
2KV
66
ø7-9mm
391J
3KV
66
ø10-16mm
Under 100pF: Actual value, 100pF and over: Marked with 3 figures
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Marked with code (omitted for nominal body diameter ø6mm and under)
Marked with code (for DC3.1ꢀkV, marked with 3KV)
Marked with (omitted for nominal body diameter ø9mm and under)
Abbreviation (omitted for nominal body diameter øꢀmm and under)
Manufacturer's Identification
Manufactured Date Code
31
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C8±E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
SL Characteristics
Lead
Spacing F
(mm)
Lead
Lead
Lead
DC Rated
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Long Bulk
Package
Short Bulk
Package
Taping
Voltage
DEA1X3D100J
DEA1X3D120J
DEA1X3D150J
DEA1X3D180J
DEA1X3D220J
DEA1X3D270J
DEA1X3D330J
DEA1X3D390J
DEA1X3D470J
DEA1X3D560J
DEA1X3D680J
DEA1X3D820J
DEA1X3D101J
DEA1X3D121J
DEA1X3D151J
DEA1X3D181J
DEA1X3D221J
DEA1X3D271J
DEA1X3D331J
DEA1X3D391J
DEA1X3D471J
DEA1X3D561J
DEA1X3F100J
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
10pF±±5
12pF±±5
1±pF±±5
18pF±±5
22pF±±5
27pF±±5
33pF±±5
39pF±±5
47pF±±5
±6pF±±5
68pF±±5
82pF±±5
100pF±±5
120pF±±5
1±0pF±±5
180pF±±5
220pF±±5
270pF±±5
330pF±±5
390pF±±5
470pF±±5
±60pF±±5
10pF±±5
12pF±±5
1±pF±±5
18pF±±5
22pF±±5
27pF±±5
33pF±±5
39pF±±5
47pF±±5
±6pF±±5
68pF±±5
82pF±±5
100pF±±5
120pF±±5
1±0pF±±5
180pF±±5
220pF±±5
270pF±±5
330pF±±5
390pF±±5
4.±mm max.
4.±mm max.
4.±mm max.
4.±mm max.
4.±mm max.
4.±mm max.
4.±mm max.
±.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
7.0mm max.
7.0mm max.
8.0mm max.
8.0mm max.
9.0mm max.
10.0mm max.
11.0mm max.
12.0mm max.
13.0mm max.
14.0mm max.
1±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
7.0mm max.
7.0mm max.
8.0mm max.
8.0mm max.
9.0mm max.
10.0mm max.
11.0mm max.
11.0mm max.
12.0mm max.
14.0mm max.
1±.0mm max.
16.0mm max.
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
±.0
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
7.±
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
±.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
C1B
C1B
C1B
C1B
C1B
C1B
C1B
C1B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
A3B
A3B
CDB
CDB
CDB
CDB
CDB
C3B
C3B
C3B
C3B
C3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
D1B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B2B
B3B
B3B
B3B
B3B
DDB
DDB
DDB
DDB
DDB
D3B
D3B
D3B
D3B
D3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
P2A
P2A
P2A
P2A
P2A
P2A
P2A
P2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N2A
N3A
N3A
N7A
N7A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
P3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N7A
N7A
N7A
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
5
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
DEA1X3F120J
DEA1X3F150J
DEA1X3F180J
DEA1X3F220J
DEA1X3F270J
DEA1X3F330J
DEA1X3F390J
DEA1X3F470J
DEA1X3F560J
DEA1X3F680J
DEA1X3F820J
DEA1X3F101J
DEA1X3F121J
DEA1X3F151J
DEA1X3F181J
DEA1X3F221J
DEA1X3F271J
DEA1X3F331J
DEA1X3F391J
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
32
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEA Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +125°C
No visible defect, and dimensions are
within specified range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires
for 1 to 5 sec. (Charge/Discharge currentV50mA)
Between Lead
Wires
No failure
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
right, and AC1250V(r.m.s.) <50/60Hz> is
applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
ꢂetal balls
(Charge/Discharge currentV50mA)
Insulation
Between Lead
Wires
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
5
6
7
10000ꢂΩ min.
Resistance (I.R.)
The capacitance should be measured at 20°C with 1±0.2ꢂHz
and AC5V(r.m.s.) max.
Capacitance
Q
Within specified tolerance
2
400+20C* min. (±0pF under)
The Q should be measured at 20°C with 1±0.2ꢂHz and
AC5V(r.m.s.) max.
1000 min. (±0pF min.)
+±50 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The capacitance measurement should be made at each step
specified in the Table.
5
8
Temperature Characteristics
Step
Temp. (°C)
1
20±2
2
±
20±2
4
85±2
5
20±2
-25±±
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N (5N for
lead diameter 0.5mm), and keep it for 10±1
sec.
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to ±
sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6
hrs., 2 hrs. each in ± mutually perpendicular directions.
Vibration
Resistance
Capacitance
Within specified tolerance
10
2
400+20C* min. (±0pF under)
Q
1000 min. (±0pF min.)
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-±Ag-0.5Cu) 245±5°C
H6± Eutectic Solder 2±5±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over ±/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
Within ±2.5%
The lead wire should be immersed into the melted solder of
±50±10°C (ꢀody of ꢁ5mm and under: 270±5°C) up to about
1.5 to 2mm from the main body for ±.5±0.5 sec.
(ꢀody of ꢁ5mm and under: 5±0.5 sec.)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitance
Change
Soldering Effect
(Non-Preheat)
12
Dielectric Strength
(Between Lead
Wires)
Per item 4.
1
1
* "Room condition" Temperature: 15 to ±5°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
2
* "C" expresses nominal capacitance value (pF).
Continued on the following page.
33
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEA Series Specifications and Test Methods
Contwnꢂed frou the precedwng page.
No.
Item
Appearance
Specifications
No uarked defect
Test Method
Fwrst the capacwtor shoꢂld be
Capacwtor
1.5
Therual
Screen
stored at 120+0/-5ꢀC for
60+0/-5 sec.
Capacitance
Change
Wwthwn 2.5%
Then, as wn the figꢂre, the lead
ꢁwres shoꢂld be wuuersed wn
solder of 260+0/-5ꢀC ꢂp to 1.5
to 2.0uu frou the root of
teruwnal for 7.5+0/-1 sec.
Post-treatuent:
to 2.0uu
Soldering Effect
(On-Preheat)
Molten
Solder
13
Dielectric Strength
(Between Lead
Wires)
Per wteu 4.
1
Capacwtor shoꢂld be stored for 1 to 2 hrs. at roou condwtwon.*
Appearance
No uarked defect
Wwthwn 5%
The capacwtor shoꢂld be sꢂbjected to 5 teuperatꢂre cycles.
<Teuperatꢂre Cycle>
Capacitance
Change
Step Temperature (°C) Time (min)
2
1
2
3
4
-25 3
Roou Teup.
125 3
30
3
30
3
275+5/2C* uwn. (30pF ꢂnder)
Temperature
Cycle
Q
14
350 uwn. (30pF uwn.)
I.R.
1000MΩ uwn.
Roou Teup.
Cycle twue: 5 cycles
Dielectric Strength
(Between Lead
Wires)
Post-treatuent:
Per wteu 4.
1
Capacwtor shoꢂld be stored for 1 to 2 hrs. at roou condwtwon.*
Appearance
No uarked defect
Wwthwn 5%
Set the capacwtor for 500+24/-0 hrs. at 40 2ꢀC wn ꢃ0 to ꢃ5%
relatwve hꢂuwdwty.
Capacitance
Change
Humidity (Under
Steady State)
15
16
2
275+5/2C* uwn. (30pF ꢂnder)
Post-treatuent:
Capacwtor shoꢂld be stored for 1 to 2 hrs. at roou condwtwon.*
Q
5
1
350 uwn. (30pF uwn.)
I.R.
1000MΩ uwn.
Appearance
No uarked defect
Apply the rated voltage for 500+24/-0 hrs. at 40 2ꢀC wn ꢃ0 to
ꢃ5% relatwve hꢂuwdwty.
Capacitance
Change
Wwthwn 5%
Humidity
Loading
<
(Charge/Dwscharge cꢂrrent 50uA)
=
2
275+5/2C* uwn. (30pF ꢂnder)
Post-treatuent:
Q
1
350 uwn. (30pF uwn.)
Capacwtor shoꢂld be stored for 1 to 2 hrs. at roou condwtwon.*
I.R.
1000MΩ uwn.
Appearance
No uarked defect
Apply a DC voltage of 150% of the rated voltage for
Capacitance
Change
Wwthwn 3%
1000+48/-0 hrs. at 125 2ꢀC ꢁwth a relatwve hꢂuwdwty of 50%
<
17 Life
uax. (Charge/Dwscharge cꢂrrent 50uA)
=
2
275+5/2C* uwn. (30pF ꢂnder)
Post-treatuent:
Q
1
350 uwn. (30pF uwn.)
Capacwtor shoꢂld be stored for 1 to 2 hrs. at roou condwtwon.*
I.R.
2000MΩ uwn.
1
* "Roou condwtwon" Teuperatꢂre: 15 to 35ꢀC, Relatwve hꢂuwdwty: 45 to 75%, Atuospherwc pressꢂre: 86 to 106kPa
2
* "C" expresses nouwnal capacwtance valꢂe (pF).
34
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors
DEB Series (Class 2/DC2k-3.15kV)
<Fig. 1>
T max.
<Fig. 2>
D max.
T max.
Features
1. Small size and high capacitance
e
2. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
Please contact us when a halogen-free product*
is necessary.
F
1.0
ød
(in mm)
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
3. Taping available for automatic insertion.
Lead Code Coating Extension e
ød
Style
[Bulk]
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
A2, A3
C1, CD
C3
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
3.0 max.
3.0 max.
0.ꢀ 0.0ꢀ Fig. 2
0.6 0.0ꢀ Fig. 2
Applications
Ideal for use on decoupling circuits for power supplies.
<Fig. 1>
T max.
<Fig. 2>
T max.
D max.
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
e
ød
F
0.ꢁ
(in mm)
Lead Code Coating Extension e
ød
Style
Up to the end of crimp 0.6 0.0ꢀ Fig. 1
B2, B3
D1, DD
D3
[Bulk]
3.0 max.
3.0 max.
0.ꢀ 0.0ꢀ Fig. 2
0.6 0.0ꢀ Fig. 2
Vertical Crimp Short (Fig. 1)
Straight Short (Fig. 2)
6
Marking
Temp. Char.
B
E
F
Nominal Body Diameter
221
3KV
102
2KV
ø4.5-5mm
ø6mm
331
3KV
66
102
2KV
66
102K
3KV
66
102Z
3KV
66
472Z
2KV
66
ø7-9mm
B
E
103Z
2KV
66
332K
3KV
66
472Z
3KV
66
ø10-16mm
Marked with code for char. B and E (omitted for nominal body diameter ø9mm and under)
Marked with 3 figures
Temperature Characteristics
Nominal Capacitance
Marked with code (omitted for nominal body diameter ø6mm and under)
Marked with code (for DC3.1ꢀkV, marked with 3KV)
Capacitance Tolerance
Rated Voltage
Marked with (omitted for nominal body diameter ø9mm and under)
Abbreviation (omitted for nominal body diameter øꢀmm and under)
Manufacturer's Identification
Manufactured Date Code
35
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
B Characteristics
Lead
Spacing F
(mm)
Lead
Lead
Lead
DC Rated
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Long Bulk
Package
Short Bulk
Package
Taping
Voltage
DEBB33D101K
DEBB33D151K
DEBB33D221K
DEBB33D331K
DEBB33D471K
DEBB33D681K
DEBB33D102K
DEBB33D152K
DEBB33D222K
DEBB33D332K
DEBB33D472K
DEBB33F101K
DEBB33F151K
DEBB33F221K
DEBB33F331K
DEBB33F471K
DEBB33F681K
DEBB33F102K
DEBB33F152K
DEBB33F222K
DEBB33F332K
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
470pF 10ꢀ
680pF 10ꢀ
1000pF 10ꢀ
1500pF 10ꢀ
2200pF 10ꢀ
3300pF 10ꢀ
4700pF 10ꢀ
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
470pF 10ꢀ
680pF 10ꢀ
1000pF 10ꢀ
1500pF 10ꢀ
2200pF 10ꢀ
3300pF 10ꢀ
4.5mm max.
4.5mm max.
4.5mm max.
5.0mm max.
6.0mm max.
7.0mm max.
8.0mm max.
9.0mm max.
10.0mm max.
12.0mm max.
15.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
6.0mm max.
7.0mm max.
8.0mm max.
9.0mm max.
11.0mm max.
13.0mm max.
15.0mm max.
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
C1B
C1B
C1B
C1B
A2B
A2B
A2B
A2B
A2B
A3B
A3B
CDB
CDB
CDB
C3B
C3B
A3B
A3B
A3B
A3B
A3B
D1B
D1B
D1B
D1B
B2B
B2B
B2B
B2B
B2B
B3B
B3B
DDB
DDB
DDB
D3B
D3B
B3B
B3B
B3B
B3B
B3B
P2A
P2A
P2A
P2A
N2A
N2A
N2A
N2A
N2A
N3A
N7A
P3A
P3A
P3A
P3A
P3A
N3A
N3A
N3A
N3A
N7A
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
E Characteristics
6
Lead
Spacing F
(mm)
Lead
Lead
Lead
Package
Taping
DC Rated
Voltage
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Package
Long Bulk Short Bulk
DEBE33D102Z
2000Vdc
2000Vdc
2000Vdc
1000pF+80/-20ꢀ
2200pF+80/-20ꢀ
4700pF+80/-20ꢀ
6.0mm max.
8.0mm max.
11.0mm max.
5.0
5.0
5.0
7.5
7.5
7.5
7.5
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
A2B
A2B
A2B
A3B
C3B
A3B
A3B
B2B
B2B
B2B
B3B
D3B
B3B
B3B
N2A
N2A
N2A
N7A
P3A
N3A
N3A
ppp
DEBE33D222Z
DEBE33D472Z
DEBE33D103Z
DEBE33F102Z
ppp
ppp
ppp
2000Vdc 10000pF+80/-20ꢀ 16.0mm max.
3150Vdc
3150Vdc
3150Vdc
1000pF+80/-20ꢀ
2200pF+80/-20ꢀ
4700pF+80/-20ꢀ
7.0mm max.
10.0mm max.
13.0mm max.
ppp
ppp
ppp
DEBE33F222Z
DEBE33F472Z
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
F Characteristics
Lead
Spacing F
(mm)
Lead
Lead
Lead
Package
Taping
DC Rated
Voltage
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Package
Long Bulk Short Bulk
DEBF33D102Z
2000Vdc
2000Vdc
2000Vdc
1000pF+80/-20ꢀ
2200pF+80/-20ꢀ
4700pF+80/-20ꢀ
5.0mm max.
7.0mm max.
9.0mm max.
5.0
5.0
5.0
7.5
5.0mm max.
5.0mm max.
5.0mm max.
5.0mm max.
C1B
A2B
A2B
A3B
D1B
B2B
B2B
B3B
P2A
N2A
N2A
N3A
ppp
DEBF33D222Z
DEBF33D472Z
DEBF33D103Z
ppp
ppp
ppp
2000Vdc 10000pF+80/-20ꢀ 12.0mm max.
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
36
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEB Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +85°C
No visible defect, and dimensions are
within specified range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires
Between Lead
Wires
No failure
<
for 1 to 5 sec. ꢀCharge/Discharge current 50mAꢂ
=
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2mm off the metal balls as shown in
the figure at right, and DC voltage of 1.±kꢃ
is applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
Metal balls
<
ꢀCharge/Discharge current 50mAꢂ
=
Insulation
Between Lead
Wires
The insulation resistance should be measured with
DC500±50ꢃ within 60±5 sec. of charging.
5
6
7
10000MΩ min.
Resistance (I.R.)
The capacitance should be measured at 20°C with 1±0.2kHz
and AC5ꢃꢀr.m.s.ꢂ max.
Capacitance
Within specified tolerance
Char. (, E: 2.5% max.
Char. F: 5.0% max.
The dissipation factor should be measured at 20°C with
1±0.2kHz and AC5ꢃꢀr.m.s.ꢂ max.
Dissipation Factor (D.F.)
Char. (: Within ±10%
Char. E: Within +20/-55%
Char. F: Within +±0/-80%
The capacitance measurement should be made at each step
specified in the Table.
8
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition* for 24±2 hrs. before measurements.
Step
Temp. (°C)
1
20±2
2
±
20±2
4
85±2
5
20±2
-25±±
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N ꢀ5N for
lead diameter 0.5mmꢂ, and keep it for 10±1
sec.
6
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N ꢀ2.5N for lead
diameter 0.5mmꢂ of weight and bent 90° at the point of egress,
in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to ±
sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6
hrs., 2 hrs. each in ± mutually perpendicular directions.
Vibration
Resistance
Capacitance
Within specified tolerance
10
Char. (, E: 2.5% max.
Char. F: 5.0% max.
D.F.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder ꢀSn-±Ag-0.5Cuꢂ 245±5°C
H6± Eutectic Solder 2±5±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over ±/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
The lead wire should be immersed into the melted solder of
±50±10°C ꢀ(ody of ꢁ5mm and under: 270±5°Cꢂ up to about
1.5 to 2mm from the main body for ±.5±0.5 sec.
ꢀ(ody of ꢁ5mm and under: 5±0.5 sec.ꢂ
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Char. (: Within ±5%
Char. E: Within ±15%
Char. F: Within ±20%
Capacitance
Change
Soldering Effect
(Non-Preheat)
12
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition.*
* "Room condition" Temperature: 15 to ±5°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
37
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEB Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Capacitor
1.5
Thermal
Screen
Char. B: Within ±5%
Char. E: Within ±15%
Char. F: Within ±20%
Capacitance
Change
Then, as in the figure, the lead
wires should be immersed in
solder of 260+0/-5°C up to 1.5
to 2.0mm from the root of
terminal for 7.5+0/-1 sec.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
to 2.0mm
Molten
Solder
Soldering Effect
(On-Preheat)
13
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition.*
Appearance
No marked defect
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
<Temperature Cycle>
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±±0%
Capacitance
Change
Step Temperature (°C) Time (min)
1
2
±
4
-25±±
Room Temp.
85±±
±0
±
±0
±
Char. B, E: 4.0% max.
Char. F: 7.5% max.
D.F.
I.R.
Room Temp.
2000MΩ min.
Temperature
14 and Immersion
Cycle
Cycle time: 5 cycles
<Immersion Cycle>
Step Temperature (°C) Time (min) Immersion Water
1
2
65+5/-0
0±±
15
15
Clean water
Salt water
Dielectric Strength
(Between Lead
Wires)
Cycle time : 2 cycles
Per item 4.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition.*
Appearance
No marked defect
Set the capacitor for 500+24/-0 hrs. at 40±2°C in ꢀ0 to ꢀ5%
relative humidity.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*
6
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±±0%
Capacitance
Change
Humidity (Under
15
Steady State)
Char. B, E: 5.0% max.
Char. F: 7.5% max.
D.F.
I.R.
1000MΩ min.
Appearance
No marked defect
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in ꢀ0 to
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±±0%
<
ꢀ5% relative humidity. (Charge/Discharge current 50mA)
=
Capacitance
Change
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
Humidity
16
Loading
Char. B, E: 5.0% max.
Char. F: 7.5% max.
D.F.
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
I.R.
500MΩ min.
Appearance
No marked defect
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 85±2°C with a relative humidity of 50%
Char. B: Within ±10%
Char. E: Within ±20%
Char. F: Within ±±0%
Capacitance
Change
<
max. (Charge/Discharge current 50mA)
=
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
before initial measurements.
17 Life
Char. B, E: 4.0% max.
Char. F: 7.5% max.
D.F.
I.R.
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition* for 24±2 hrs.
2000MΩ min.
* "Room condition" Temperature: 15 to ±5°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
38
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors
DEC Series (Class 1, 2/DC6.3kV)
<Fig. ±>
T max.
<Fig. 2>
D max.
T max.
Features
Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
e
Please contact us when a halogen-free product*
is necessary.
* Cl=900ppm max., Br=900ppm max. and
F±±.0
ød
(in mm)
Cl+Br=1500ppm max.
[Bulk]
Lead Code Coating Extension e
ød
Style
Applications
Vertical Crimp Long (Fig. 1)
Straight Long (Fig. 2)
Up to the end of crimp 0.6±0.05 Fig. ±
3.0 max. 0.6±0.05 Fig. 2
A3
C4
1. Ideal for use as the ballast in backlighting
inverters for liquid crystal displays (SL Char.).
2. Ideal for use on high voltage circuits such as
Cockcroft circuits (B Char.).
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
Marking
Temp. Char.
SL
B
E
Nominal Body Diameter
±0J
ø7mm
6KV
7
47J
6KV
66
33±K
6KV
66
ø8-9mm
B
±5±J
6KV
66
222Z
6KV
66
±02K
6KV
66
ø10-15mm
Marked with code for char. B (omitted for nominal body diameter ø9mm and under)
Under ±00pF: Actual value, ±00pF and over: Marked with 3 figures
Marked with code
Temperature Characteristics
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Marked with code (for DC6.3kV, marked with 6KV)
Marked with
(omitted for nominal body diameter ø9mm and under)
Manufacturer's Identification
Manufactured Date Code
Abbreviation (omitted for nominal body diameter ø7mm)
39
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C8±E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
SL Characteristics
Lead
Spacing F
(mm)
DC Rated
Voltage
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
DEC1X3J100JA3BMS1
DEC1X3J100JC4BMS1
DEC1X3J120JA3B
DEC1X3J120JC4B
DEC1X3J150JA3B
DEC1X3J150JC4B
DEC1X3J180JA3B
DEC1X3J180JC4B
DEC1X3J220JA3B
DEC1X3J220JC4B
DEC1X3J270JA3B
DEC1X3J270JC4B
DEC1X3J330JA3B
DEC1X3J330JC4B
DEC1X3J390JA3B
DEC1X3J390JC4B
DEC1X3J470JA3B
DEC1X3J470JC4B
DEC1X3J560JC4B
DEC1X3J680JC4B
DEC1X3J820JC4B
DEC1X3J101JC4B
DEC1X3J121JC4B
DEC1X3J151JC4B
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
10pF±±5
10pF±±5
12pF±±5
12pF±±5
1±pF±±5
1±pF±±5
18pF±±5
18pF±±5
22pF±±5
22pF±±5
27pF±±5
27pF±±5
33pF±±5
33pF±±5
39pF±±5
39pF±±5
47pF±±5
47pF±±5
±6pF±±5
68pF±±5
82pF±±5
100pF±±5
120pF±±5
1±0pF±±5
7.0mm max.
7.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
10.0mm max.
12.0mm max.
12.0mm max.
13.0mm max.
14.0mm max.
1±.0mm max.
7.±
10.0
7.±
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
10.0
7.±
10.0
7.±
10.0
7.±
10.0
7.±
10.0
7.±
10.0
7.±
10.0
7.±
10.0
10.0
10.0
10.0
10.0
10.0
10.0
B Characteristics
Lead
Spacing F
(mm)
DC Rated
Voltage
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
DECB33J101KC4B
DECB33J151KC4B
DECB33J221KC4B
DECB33J331KC4B
DECB33J471KC4B
DECB33J681KC4B
DECB33J102KC4B
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
6300Vdc
100pF±105
1±0pF±105
220pF±105
330pF±105
470pF±105
680pF±105
1000pF±105
9.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
10.0mm max.
11.0mm max.
13.0mm max.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7
E Characteristics
Lead
Spacing F
(mm)
DC Rated
Voltage
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
DECE33J102ZC4B
DECE33J222ZC4B
6300Vdc
6300Vdc
1000pF+80/-205
2200pF+80/-205
11.0mm max.
1±.0mm max.
10.0
10.0
7.0mm max.
7.0mm max.
40
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEC Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +85°C
No visible defect, and dimensions are
within specified range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage is applied between the lead wires
Between Lead
Wires
No failure
<
for 1 to 5 sec. (Charge/Discharge current 50mA)
=
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2mm off the metal balls as shown in
the figure at right, and DC voltage of 1.±kꢁ
is applied for 1 to 5 sec. between capacitor
lead wires and metal balls.
Dielectric
Strength
4
Body Insulation
No failure
About 2mm
ꢀetal balls
<
(Charge/Discharge current 50mA)
=
Insulation
Between Lead
Wires
The insulation resistance should be measured with
DC500±50ꢁ within 60±5 sec. of charging.
5
6
10000ꢀΩ min.
Resistance (I.R.)
The capacitance should be measured at 20°C with 1±0.2kHz
(Char. SL: 1±0.2ꢀHz) and AC5ꢁ(r.m.s.) max.
Capacitance
Q
Within specified tolerance
2
Char. SL: 400+20C* min. (±0pF under)
The dissipation factor and Q should be measured at 20°C with
1±0.2kHz (Char. SL: 1±0.2ꢀHz) and AC5ꢁ(r.m.s.) max.
1000 min. (±0pF min.)
7
Dissipation Factor (D.F.)
Char. B, E: 2.5% max.
Char. SL: +±50 to -1000ppm/°C
The capacitance measurement should be made at each step
(Temp. range: +20 to +85°C) specified in the Table.
Char. B: Within ±10%
Char. E: Within +20/-55%
8
Temperature Characteristics
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at
1
room condition* for 24±2 hrs. before measurements. (Char. B, E)
Step
Temp. (°C)
1
20±2
2
±
20±2
4
85±2
5
20±2
-25±±
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
7
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to ± sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6
hrs., 2 hrs. each in ± mutually perpendicular directions.
Capacitance
Within specified tolerance
Vibration
Resistance
2
10
Char. SL: 400+20C* min. (±0pF under)
1000 min. (±0pF min.)
Q
D.F.
Char. B, E: 2.5% max.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-±Ag-0.5Cu) 245±5°C
H6± Eutectic Solder 2±5±5°C
Lead wire should be soldered with
uniform coating on the axial direction
over ±/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
The lead wire should be immersed into the melted solder of
±50±10°C up to about 1.5 to 2mm from the main body for
±.5±0.5 sec.
Char. SL: Within ±2.5%
Char. B: Within ±5%
Char. E: Within ±15%
Capacitance
Change
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
1
Soldering Effect
(Non-Preheat)
then placed at room condition* for 24±2 hrs.
12
before initial measurements. (Char. B, E)
Dielectric Strength
(Between Lead
Wires)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
1
Per item 4.
room condition.* (Char. SL)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
1
room condition.* (Char. B, E)
1
* "Room condition" Temperature: 15 to ±5°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
2
* "C" expresses nominal capacitance value (pF).
Continued on the following page.
41
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEC Series Specifications and Test Methods
Contwnꢁed frou the precedwng page.
No.
Item
Appearance
Specifications
No uarked defect
Test Method
Fwrst the capacwtor shoꢁld be
stored at 1±0+0/-52C for
60+0/-5 sec.
Capacwtor
1.5
Therual
Screen
Char. SL: Wwthwn ±±.5%
Char. B: Wwthwn ±5%
Char. E: Wwthwn ±15%
Capacitance
Change
Thenꢂ as wn the figꢁreꢂ the lead
ꢀwres shoꢁld be wuuersed wn
solder of ±60+0/-52C ꢁp to 1.5
to ±.0uu frou the root of
teruwnal for 7.5+0/-1 sec.
to ±.0uu
Molten
Solder
Soldering Effect
(On-Preheat)
13
Pre-treatuent: Capacwtor shoꢁld be stored at 85±±2C for 1 hr.ꢂ
Dielectric Strength
(Between Lead
Wires)
1
then placed at roou condwtwon* for ±4±± hrs.
before wnwtwal ueasꢁreuents. (Char. Bꢂ E)
Per wteu 4.
Post-treatuent: Capacwtor shoꢁld be stored for 1 to ± hrs. at
1
roou condwtwon.* (Char. SL)
Post-treatuent: Capacwtor shoꢁld be stored for 4 to ±4 hrs. at
1
roou condwtwon.* (Char. Bꢂ E)
Appearance
No uarked defect
The capacwtor shoꢁld be sꢁbjected to 5 teuperatꢁre cyclesꢂ
then consecꢁtwvely to ± wuuerswon cycles.
Char. SL: Wwthwn ±3%
Char. B: Wwthwn ±10%
Char. E: Wwthwn ±±0%
Capacitance
Change
<Teuperatꢁre Cycle>
Step Temperature (°C) Time (min)
±
Char. SL: ±75+5/±C* uwn. (30pF ꢁnder)
1
±
3
4
-±5±3
Roou Teup.
85±3
30
3
30
3
Q
350 uwn. (30pF uwn.)
Char. Bꢂ E: 4.0% uax.
±000MΩ uwn.
D.F.
I.R.
Roou Teup.
Temperature
Cycle twue: 5 cycles
14 and Immersion
Cycle
<Iuuerswon Cycle>
Step Temperature (°C) Time (min) Immersion Water
1
±
65+5/-0
0±3
15
15
Clean ꢀater
Salt ꢀater
Cycle twue: ± cycles
Dielectric Strength
(Between Lead
Wires)
Per wteu 4.
Pre-treatuent: Capacwtor shoꢁld be stored at 85±±2C for 1 hr.ꢂ
1
then placed at roou condwtwon* for ±4±± hrs.
before wnwtwal ueasꢁreuents. (Char. Bꢂ E)
Post-treatuent: Capacwtor shoꢁld be stored for 4 to ±4 hrs. at
1
roou condwtwon.*
Appearance
No uarked defect
Char. SL: Wwthwn ±5%
Char. B: Wwthwn ±10%
Char. E: Wwthwn ±±0%
Set the capacwtor for 500+±4/-0 hrs. at 40±±2C wn ꢃ0 to ꢃ5%
relatwve hꢁuwdwty.
Capacitance
Change
Pre-treatuent: Capacwtor shoꢁld be stored at 85±±2C for 1 hr.ꢂ
Humidity (Under
15
1
then placed at roou condwtwon* for ±4±± hrs.
±
7
Steady State)
Char. SL: ±75+5/±C* uwn. (30pF ꢁnder)
Q
before wnwtwal ueasꢁreuents. (Char. Bꢂ E)
350 uwn. (30pF uwn.)
Char. Bꢂ E: 5.0% uax.
1000MΩ uwn.
Post-treatuent: Capacwtor shoꢁld be stored for 1 to ± hrs. at
1
D.F.
roou condwtwon.*
I.R.
Appearance
No uarked defect
Apply the rated voltage for 500+±4/-0 hrs. at 40±±2C wn ꢃ0 to
<
Char. SL: Wwthwn ±7.5%
Char. B: Wwthwn ±10%
Char. E: Wwthwn ±±0%
ꢃ5% relatwve hꢁuwdwty. (Charge/Dwscharge cꢁrrent 50uA.)
=
Capacitance
Change
Pre-treatuent: Capacwtor shoꢁld be stored at 85±±2C for 1 hr.ꢂ
1
then placed at roou condwtwon* for ±4±± hrs.
Humidity
16
before wnwtwal ueasꢁreuents. (Char. Bꢂ E)
Char. SL:
100+10/3C* uwn. (30pF ꢁnder)
±00 uwn. (30pF uwn.)
Char. Bꢂ E: 5.0% uax.
500MΩ uwn.
Loading
Post-treatuent: Capacwtor shoꢁld be stored for 1 to ± hrs. at
±
Q
1
roou condwtwon.* (Char. SL)
Post-treatuent: Capacwtor shoꢁld be stored at 85±±2C for 1
1
D.F.
hr.ꢂ then placed at roou condwtwon* for ±4±±
hrs. (Char. Bꢂ E)
I.R.
Appearance
No uarked defect
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 85±±2C ꢀwth a relatwve hꢁuwdwty of 50%
Char. SL: Wwthwn ±3%
Char. B: Wwthwn ±10%
Char. E: Wwthwn ±±0%
<
Capacitance
Change
uax. (Charge/Dwscharge cꢁrrent 50uA.)
=
Pre-treatuent: Capacwtor shoꢁld be stored at 85±±2C for 1 hr.ꢂ
1
then placed at roou condwtwon* for ±4±± hrs.
±
17 Life
Char. SL: ±75+5/±C* uwn. (30pF ꢁnder)
before wnwtwal ueasꢁreuents. (Char. Bꢂ E)
Q
350 uwn. (30pF uwn.)
Post-treatuent: Capacwtor shoꢁld be stored for 1 to ± hrs. at
1
roou condwtwon.* (Char. SL)
D.F.
I.R.
Char. Bꢂ E: 4.0% uax.
Post-treatuent: Capacwtor shoꢁld be stored at 85±±2C for 1
1
hr.ꢂ then placed at roou condwtwon* for ±4±±
±000MΩ uwn.
hrs. (Char. Bꢂ E)
1
* "Roou condwtwon" Teuperatꢁre: 15 to 352Cꢂ Relatwve hꢁuwdwty: 45 to 75%ꢂ Atuospherwc pressꢁre: 86 to 106kPa
±
* "C" expresses nouwnal capacwtance valꢁe (pF).
42
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors
DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p)
D max.
T max.
Features
1. Compact size: Diameter is 20% less than DEC series.
e
2. Low self-heating at high frequency and high voltage
due to low dielectric loss of the ceramic material.
3. Operating temperature range is guaranteed up to 105
degrees C.
F±±.0
ød
4. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
Please contact us when a halogen-free product*
is necessary.
(in mm)
[Bulk]
Lead Code
Coating Extension e
Up to the end of crimp
ød
0.6±0.0ꢀ
Vertical Crimp Long (A3)
A3
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
5. Taping available for automatic insertion.
D max.
T max.
Applications
e
Ideal for use in LCD backlight inverters.
ød
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
F±0.ꢁ
(in mm)
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Short (J3)
Up to the end of crimp
0.6±0.0ꢀ
J3
Marking
Temp. Char.
CH
SL
Nominal Body Diameter
±0J
6K~
66
33J
6K~
66
ø7-9mm
Temperature Characteristics
Upper horizontal line
–
8
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Actual value
Marked with code
Marked with code (Marked with 6K~)
Abbreviation
Manufactured Date Code
SL Characteristics
Lead
Spacing F
(mm)
Lead
Lead
Lead
Rated
Voltage
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Package
Short Bulk
Package
Taping
Long Bulk
A3B
DEF1XLH100J
DEF1XLH120J
DEF1XLH150J
DEF1XLH180J
DEF1XLH220J
DEF1XLH270J
DEF1XLH330J
DEF1XLH390J
DEF1XLH470J
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
10pF 5%
12pF 5%
15pF 5%
18pF 5%
22pF 5%
27pF 5%
33pF 5%
39pF 5%
47pF 5%
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
8.0mm max.
9.0mm max.
9.0mm max.
9.0mm max.
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
43
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C8ꢀE.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CH Characteristics
Lead
Spacing F
(mm)
Lead
Lead
Lead
Rated
Voltage
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Long Bulk
Package
Short Bulk
Package
Taping
DEF2CLH020C
DEF2CLH030C
DEF2CLH040C
DEF2CLH050D
DEF2CLH060D
DEF2CLH070D
DEF2CLH080D
DEF2CLH090D
DEF2CLH100J
6300Vdc(p-p) 2.0pF 0.2ꢀpF 7.0mm max.
6300Vdc(p-p) 3.0pF 0.2ꢀpF 7.0mm max.
6300Vdc(p-p) 4.0pF 0.2ꢀpF 7.0mm max.
7.ꢀ
7.ꢀ
7.ꢀ
7.ꢀ
7.ꢀ
7.ꢀ
7.ꢀ
7.ꢀ
7.ꢀ
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
6.0mm max.
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
J3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
ppp
ppp
ppp
ppp
ppp
ppp
ppp
ppp
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
6300Vdc(p-p)
ꢀ.0pF 0.ꢀpF
6.0pF 0.ꢀpF
7.0pF 0.ꢀpF
8.0pF 0.ꢀpF
9.0pF 0.ꢀpF
10pF ꢀ5
7.0mm max.
7.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.
8
44
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEF Series Specifications and Test Methods
No.
1
Item
Specifications
Test Method
Operating Temperature Range
-25 to +105°C
No visible defect, and dimensions are
within specified range.
The capacitor should be visually inspected for evidence of
defect. Dimensions should be measured with slide calipers.
2
3
Appearance and Dimensions
Marking
To be easily legible
The capacitor should be visually inspected.
The capacitor should not be damaged when DC12.6kV is
applied between the lead wires for 1 to 5 sec.
Between Lead
Wires
No failure
<
(Charge/Discharge current 50mA)
=
The capacitor is placed in the container
with metal balls of diameter 1mm so that
each lead wire, short circuited, is kept
about 2.0mm off the metal balls as shown
in the figure at right, and DC voltage of
1.±kV is applied for 1 to 5 sec. between
capacitor lead wires and metal balls.
Dielectric
Strength
4
Body Insulation
No failure
About
2.0mm
ꢀetal balls
<
(Charge/Discharge current 50mA)
=
Insulation
Between Lead
Wires
The insulation resistance should be measured with
DC500±50V within 60±5 sec. of charging.
5
6
7
10000ꢀΩ min.
Resistance (I.R.)
The capacitance should be measured at 20°C with 1±0.2ꢀHz
and AC5V(r.m.s.) max.
Capacitance
Q
Within specified tolerance
400+20C*2min. (±0pF under)
1000 min. (±0pF min.)
The Q should be measured at 20°C with 1±0.2ꢀHz and
AC5V(r.m.s.) max.
Char. CH: 0±60ppm/°C
Char. SL: +±50 to -1000ppm/°C
(Temp. range: +20 to +85°C)
The capacitance measurement should be made at each step
specified in the Table.
8
Temperature Characteristics
Step
Temp. (°C)
1
20±2
2
±
20±2
4
85±2
5
20±2
-25±±
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1 sec.
Pull
W
Lead wire should not be cut off.
Capacitor should not be broken.
9
Strength of Lead
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to ± sec.
Bending
Appearance
No marked defect
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6
hrs., 2 hrs. each in ± mutually perpendicular directions.
Vibration
Resistance
Capacitance
Within specified tolerance
400+20C*2min. (±0pF under)
1000 min. (±0pF min.)
10
Q
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
sec. In both cases the depth of dipping is up to about 1.5 to
2.0mm from the root of lead wires.
Temp. of solder: Lead Free Solder (Sn-±Ag-0.5Cu) 245±5°C
H6± Eutectic Solder 2±5±5°C
8
Lead wire should be soldered with
uniform coating on the axial direction
over ±/4 of the circumferential direction.
11 Solderability of Leads
Appearance
No marked defect
Within ±2.5%
The lead wire should be immersed into the melted solder of
±50±10°C up to about 1.5 to 2.0mm from the main body for
±.5±0.5 sec.
Capacitance
Change
Soldering Effect
(Non-Preheat)
12
Dielectric Strength
(Between Lead
Wires)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
Per item 4.
room condition.*1
*1 "Room condition" Temperature: 15 to ±5°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
45
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
DEF Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
No marked defect
Test Method
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Capacitor
1.5
Thermal
Screen
Capacitance
Change
Within 2.5%
Then, as in the figure, the lead
ꢀires should be immersed in
solder of 260+0/-5°C up to 1.5
to 2.0mm from the root of
terminal for 7.5+0/-1 sec.
to 2.0mm
Soldering Effect
(On-Preheat)
Molten
Solder
13
Dielectric Strength
(Between Lead
Wires)
Per item 4.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*1
Appearance
No marked defect
Within 3%
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Capacitance
Change
<Temperature Cycle>
200+10C*2min. (10pF under)
275+5/2C*2min. (10pF min. and 30pF under)
350 min. (30pF min.)
Step Temperature (°C) Time (min)
Q
1
2
3
4
-25 3
Room Temp.
105 3
30
3
30
3
I.R.
2000MΩ min.
Temperature
Room Temp.
14 and Immersion
Cycle
Cycle time: 5 cycles
<Immersion Cycle>
Step Temperature (°C) Time (min) Immersion Water
Dielectric Strength
(Between Lead
Wires)
1
2
65+5/-0
0 3
15
15
Clean ꢀater
Salt ꢀater
Per item 4.
Cycle time: 2 cycles
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition.*1
Appearance
No marked defect
Within 5%
Capacitance
Change
Set the capacitor for 500 +24/-0 hrs. at 40 2°C in ꢁ0 to ꢁ5%
relative humidity.
Humidity (Under
15
200+10C*2min. (10pF under)
275+5/2C*2min. (10pF min. and 30pF under)
350 min. (30pF min.)
Steady State)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*1
Q
I.R.
1000MΩ min.
Appearance
No marked defect
Apply 6.3kVp-p at the frequency in the Table for 1000+48/-0
hrs. at 105 2°C ꢀith a relative humidity of 50% max.
Capacitance
Change
<
Within 3%
(Charge/Discharge current 50mA.)
=
<Frequency>
200+10C*2min. (10pF under)
275+5/2C*2min. (10pF min. and 30pF under)
350 min. (30pF min.)
Capacitance (pF)
to 10
Frequency (kHz)
16 Life
Q
100
45
12 to 22
27 to 47
33
I.R.
2000MΩ min.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*1
8
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
46
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Characteristics Data (Typical Example)
Capacitance - Temperature Characteristics
CH, SL, B, E, F char.
C, D, R char.
20
20
10
10
SL
D
CH
SL
B
CH
B
C
R
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
0
E
F
E
F
-10
-20
-30
R
D
C
-40
-20
0
20
40
Temp. (°C)
60
80
100
120
-40
-20
0
20
40
60
80
100
120
140
Temperature (°C)
Capacitance - DC Bias Characteristics
20
DESD33A471KA2B
0
-20
DEA1X3D221JA2B
DEHR33D102KA3B
-40
-60
DEBB33D102KA2B
DEBE33D222ZA2B
-80
-100
0
500
1000
DC Bias (V)
1500
2000
47
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Packaging
Taping Specifications
15.0mm pitch / lead spacing 7.5mm taping
15.0mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: Nꢀ)
Straight type
(Lead Code: Pꢀ)
ΔS
P2
P
D
ΔS
D
P2
P
ød
P1
F
ød
P1
F
øD0
øD0
P0
P0
ꢀ0.0mm pitch / lead spacing 7.5mm taping
Vertical crimp type
12.7mm pitch / lead spacing 5.0mm taping
Straight type
(Lead Code: N7)
(Lead Code: P2)
P2
P
ΔS
ΔS
P2
D
D
P
ød
P1
ød
F
P1
F
øD0
øD0
P0
P0
O
12.7mm pitch / lead spacing 5.0mm taping
Vertical crimp type
Δh1
T max.
Δh2
(Lead Code: N2)
*
*
*
Marked
side
ΔS
P2
D
P
*
ød
P1
F
H0
H0
Lead Code
N2, Nꢀ, N7
Lead Code
Nꢀ
Lead Code P2, Pꢀ
øD0
Except DEF Series
DEF Series
P0
Item
Code
P
P3
N3
N7
P2
N2
15.0 2.0
15.0 0.ꢀ
ꢀ0.0 2.0
12.7 1.0
Pitch of component
Pitch of sprocket hole
Lead spacing
P0
F
12.7 0.ꢀ
+0.8
7.5 1.0
7.5 1.5
ꢀ.75 1.0
5.0
–0.2
P2
P1
D
6.ꢀ5 1.ꢀ
ꢀ.85 0.7
Length from hole center to component center
Length from hole center to lead
Body diameter
See the individual product specifications.
ΔS
W
W1
H
0 2.0
0 1.0
Deviation along tape, leꢀ or right
Carrier tape width
18.0 0.5
9.0 0.5
Position of sprocket hole
Lead distance between reference
and bottom planes
+1.5
–1.0
+1.5
20.0
—
—
20.0
—
–1.0
+2.0
+2.0
H0
18.0
—
18.0
–0
–0
+0.5 to -1.0
Protrusion length
øD0
ød
t1
4.0 0.1
0.6 0.05
0.6 0.ꢀ
1.5 max.
Diameter of sprocket hole
Lead diameter
Total tape thickness
t2
Total thickness, tape and lead wire
Body thickness
T
See the individual product specifications.
+0
L
11.0
Portion to cut in case of defect
Hold down tape width
–1.0
W0
W2
e
11.5 min.
1.5 1.5
Hold down tape position
Coating extension on lead
Deviation across tape, front
Deviation across tape, rear
ꢀ.0 max. (Vertical crimp type: Up to the end of crimp)
Δh1
Δh2
2.0 max. 1.0 max.
(in : mm)
Continued on the following page.
48
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Packaging
Continued from the preceding page.
Packaging Styles
Bulk
Taping
Polyethylene Bag
Ammo Pack
Minimum Quantity (Order in Sets Only)
[Bulk]
(pcs./Bag)
Lead Code
Bp, Dp, Jp
Lead Code
Ap, Cp
Body Dia. D
(mm)
Long
Short
500
500
500
250
250
200
100
500
–
4.5 to 6
7
500
250 *1
250
200
200
100
50
8 to 11
12
DEH Series
DEA Series
DEB Series
13, 14
15 to 18
19 to 21
7 to 9
10, 11
12 to 15
250
100
100
DEC Series
DEF Series
–
*1 Lead Spacing F=5.0mm (Code: A2): 500pcs.
[Taping]
(pcs./Ammo Pack)
Lead Code
DEH Series
DEA Series
DEB Series
DEF Series
N2, P2
1,500
1,500
1,500
–
N3, P3
900
N7
500
500
500
–
900
900
900
49
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Caution
!
Caution (Rating)
!
<DEH/DEA/DEB/DEC Series>
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p that contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes
these irregular voltages.
When DC-rated capacitors are to be used in input circuits
from commercial power source (AC filter), be sure to use
Safety Certified Capacitors because various regulations
on withstand voltage or impulse withstand established for
each type of equipment should be taken into
consideration.
When using the low-dissipation DEA (SL Char.) /DEC (SL
Char.) /DEH (R Char.) series in a high- frequency and
high-voltage circuit, be sure to read the instructions in
item 4.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss. The frequency of
the applied sine wave voltage should be less than
300kHz. The applied voltage load (*) should be such that
the capacitor's self-generated heat is within 20°C in an
atmospheric temperature of 25°C. When measuring, use
a thermocouple of small thermal capacity-K of ø0.1mm in
conditions where the capacitor is not affected by radiant
heat from other components or surrounding ambient
fluctuations.
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability.
(Never attempt to perform measurement with the cooling
fan running. Otherwise, accurate measurement cannot
be ensured.)
*Before using the low-dissipation DEA/DEC (SL Char.)
/DEH series, be sure to read the instructions in item 4.
3. Fail-Safe
When the capacitor is broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could follow
an electric shock, fire or fume.
Continued on the following page.
50
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Caution
!
Continued from the preceding page.
4. Load Reduction and Self-generated Heat During
Application of High-frequency and High-voltage
Due to the low self-heating characteristics of low-
dissipation capacitors, the allowable electric power of
these capacitors is generally much higher than that of B
characteristic capacitors. However, if the self-heating
temperature is 20°C under a high-frequency voltage
whose peak-to-peak value equals the capacitor's rated
voltage, the capacitor's power consumption may exceed
its allowable electric power.
contact our sales representatives or product engineers.
We are offering free soꢀware, The Capacitor Selection
Tool: by Voltage Form, which will assist you in selecting a
suitable capacitor.
The soꢀware can be downloaded from ꢁurata's Web site
(http://www.murata.com/products/design_support/
mmcsv/index.html).
By inputting capacitance values and applied voltage
waveform of the specific capacitor series, this soꢀware
will calculate the capacitor's power consumption and list
suitable capacitors.
When the result of this soꢀware is different from the
measurement result of the self-heating temperature on
your side, please contact our sales representatives or
product engineers.
Therefore, when using the DEA/DEC (SL Char.) /DEH
series in a high-frequency and high-voltage circuit with a
frequency of 1kHz or higher, make sure that the Vp-p
values including the DC bias, do not exceed the applied
voltage value specified in Table 1. Also make sure that
the self-heating temperature (the difference between
the capacitor's surface temperature and the capacitor's
ambient temperature) at an ambient temperature of
25°C does not exceed the value specified in Table 1.
As shown in Fig. 2, the self-heating temperature depends on
the ambient temperature. Therefore, if you are not able to
set the ambient temperature to approximately 25°C, please
FAILURE TO FOLLOW THE ABOVE CAUTIONS (ITEMS 1
TO 4) MAY RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION WHEN
THE PRODUCT IS USED.
<Fig. 1> Relationship Between Applied Voltage and
Self-heating Temperature (Allowable Self-heating
Temp. at 25°C Ambient Temp.)
<Table 1> Allowable Conditions at High frequency
Allowable Conditions
at High-frequency *3
DC
Rated
Voltage
Capacitor's
Ambient
Temp.
Char.
Series
Applied
Self-heating Temp.
Temp. *2
DEH Series R Char. (Rated Voltage: DC2kV to 3.15kV)
Voltage (Max.) (25°C Ambient Temp.) *1
25
1400Vp-p
2000Vp-p
1600Vp-p
3150Vp-p
2000Vp-p
20°C ꢁax.
5°C ꢁax.
20°C ꢁax.
5°C ꢁax.
2kV
20
15
10
5
DEH
R
3.15kV
2kV
-25 to +85°C
DEA
DEC
SL
SL
5°C ꢁax.
5°C ꢁax.
3.15kV 3150Vp-p
6.3kV 6300Vp-p
2kV
3.15kV
0
*1 Fig. 1 shows the relationship between the applied voltage and the allowable self- heating
temperature regarding 2 to 3.15kV rated voltage of the DEH series R characteristic.
*2 When the ambient temperature is 85 to 125°C, the applied voltage needs to be further
reduced. If the DEA/DEH series needs to be used at an ambient temperature of 85 to
125°C, please contact our sales representatives or product engineers.
*3 Fig. 3 shows reference data on the allowable voltage - frequency characteristics for a sine
wave voltage.
100
1000
Applied Voltage (Vp-p)
10000
<Fig. 2> Dependence of Self-heating Temperature on
Ambient Temperature
DEH Series R Char. (Rated Voltage: DC2kV to 3.15kV)
25
DEA/DEC Series SL Char. (Rated Voltage: DC2kV to 6.3kV)
20
20
15
10
5
15
10
5
0
0
0
20 (25)
40
60
80
100
0
20(25)
40
60
80
100
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page.
51
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Caution
!
Continued from the preceding page.
<Fig. 3> Allowable Voltage (Sine Wave Voltage) - Frequency Characteristics (At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
voltage is a rectangular wave or pulse wave voltage (instead
of a sine wave voltage), the heat generated by the capacitor
is higher than the value obtained by application of the sine
wave with the same fundamental frequency.
to the allowable voltage for a sine wave whose fundamental
frequency is twice as large as that of the rectangular wave
or pulse wave. This allowable voltage, however, varies
depending on the voltage and current waveforms.
Therefore, you are requested to make sure that the self-
heating temperature is not higher than the value specified in
Table 1.
Roughly calculated for reference, the allowable voltage for a
rectangular wave or pulse wave corresponds approximately
DEH Series R Char. (Rated Voltage: DC2kV)
DEH Series R Char. (Rated Voltage: DC3.15kV)
10000
10000
(3150)
1000
1000
220pF
220pF
470pF
1000pF
2200pF
4700pF
470pF
1000pF
2200pF
100
100
1
10
100
1000
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
DEA Series SL Char. (Rated Voltage: DC2kV)
DEA Series SL Char. (Rated Voltage: DC3.15kV)
10000
10000
(3150)
1000
10pF
100pF
220pF
10pF
100pF
220pF
470pF
1000
100
100
1
10
100
1000
1
10
100
1000
Frequency (kHz)
Frequency (kHz)
DEC Series SL Char. (Rated Voltage: DC6.3kV)
10000
(6300)
to 22pF
47pF
100pF
1000
100
1
10
100
1000
Frequency (kHz)
Continued on the following page.
52
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Caution
!
Continued from the preceding page.
<DEF Series>
1. Operating Voltage
The frequency of the applied sine wave voltage should be
less than 100kHz. The applied voltage should be less
than the value shown in the figure below. For non-sine
wave that includes a harmonic frequency, please contact
our sales representatives or product engineers.
The temperature of the surface of the capacitor:
below the upper limit of its rated operating temperature
range (including self-heating).
10000
to 10pF
(6300)
12 to 22pF
27 to 47pF
The capacitor can be applied at a maximum of
6.3kVp-p at 100kHz when the lamp is turned on.
Voltage
AC Voltage
Positional
Measurement
Vp-p
1000
1
10
100
Frequency (kHz)
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss.
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability. (Never attempt
to perform measurement with the cooling fan running.
Otherwise, accurate measurement cannot be ensured.)
3. Fail-Safe
When the capacitor is broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fume.
53
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Caution
!
Caution (Storage and Operating Condition)
!
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
Use capacitors within 6 months after delivery.
Check the solderability after 6 months or more.
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. Also, avoid exposure to
moisture. Before cleaning, bonding or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Caution (Soldering and Mounting)
!
1. Vibration and Impact
3. Bonding, Resin Molding and Coating
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
Please confirm there is no influence of holding
measures on the product with the intended equipment.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specification of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
For bonding, molding or coating this product, verify
that these processes do not affect the quality of the
capacitor by testing the performance of the bonded,
molded or coated product in the intended equipment.
When the amount of applications, dryness/hardening
conditions of adhesives and molding resins containing
organic solvents (ethyl acetate, methyl ethyl ketone,
toluene, etc). are unsuitable, the outer coating resin
of a capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding resin
or coating may cause outer coating resin cracking
and/or ceramic element cracking of a capacitor in a
temperature cycling.
4. Treatment after Bonding, Resin Molding and Coating
When the outer coating is hot (over 100 degrees C.)
after soldering, it becomes soft and fragile.
Therefore, please be careful not to give it mechanical
stress.
Soldering the capacitor with a soldering iron should
be performed in following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Soldering time: 3.5 sec. max.
Caution (Handling)
!
Vibration and Impact
Please confirm there is no influence of holding
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
measures on the product with the intended equipment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
54
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Voltage Ceramic Capacitors Notice
Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
Notice (Rating)
Capacitance Change of Capacitors
3. DEH Series
1. DEA/DEC/DEF Series (Temp. Char. CH, SL)
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this
product in a strict time constant circuit.
Capacitance might change greatly depending on the
surrounding temperature or an applied voltage.
Therefore, it is not likely to be suitable for use in a
time constant circuit. Please contact us if you need
detailed information.
2. DEB/DEC Series (Temp. Char. B, E, F)
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might change
greatly depending on the surrounding temperature or
an applied voltage. Therefore, it is not likely to be
suitable for use in a time constant circuit.
Please contact us if you need detailed information.
55
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Standard Certified Ceramic Capacitors for Automotive
Type KJ -Class X1, Y2- (For Automotive Use/AC Line Filter of PHEV/EV Charger)
D max1
T max1
Features
1. Capacitors designed for AC line filters for PHEV/EV.
2. Meet AEC-Q200
e
3. Heat cycle: 1000cycle (-55/+125 deg.)
4. Class X1/Y2 capacitors certified by UL/ENEC(VDE).
5. Rated Voltage: AC300V
6. Coated with flame-retardant epoxy resin
(conforming to UL94V-0 standard).
7. Available product for RoHS Restriction
(EU Directive 2002/95/EC).
F±±1.
ød
(in mm)
[Bulk]
Lead Code
A3
Coating Extension e
Up to the end of crimp
ød
Vertical Crimp Long (A3)
.16±.1.5
8. Taping available for automatic insertion.
Applications
D max1
T max1
1. Ideal for use as Y capacitors for AC line filters
and primary-secondary coupling on battery chargers
for PHEV/EV.
e
2. Ideal for use as a filter capacitor for DC-DC
converters for PHEV/EV and HEV.
ød
F±.1ꢀ
(in mm)
[Bulk]
Lead Code
Coating Extension e
ød
Vertical Crimp Short (B3)
Up to the end of crimp
.16±.1.5
B3
Standard Certification
Marking
Standard No.
Certified No.
Rated Voltage
Example
Item
UL
UL 6.3ꢀ4-±4
ENEC (VDE) EN 6.3ꢀ4-±4
E3792±
4..3±2±7
±
2
Type Designation KJ
AC3..V(r1m1s1)
Nominal Capacitance
(Marked with 3 figures)
2
3
4
472M
3
4
Capacitance Tolerance
Company Name Code
±
KJ300~
X1 Y2
±5
: Made in Thailand
Manufactured Date Code
Class Code X±Y2
Rated Voltage Mark
5
±D
±5
5
3..~
Lead
Spacing F
(mm)
Lead
Lead
Package
Lead
Package
Taping
AC Rated
Voltage
Temp.
Char.
Body
Dia. D
Body
Thickness T
Part Number
Capacitance
Package
Long Bulk Short Bulk
9
DE6B3KJ101K
DE6B3KJ151K
DE6B3KJ221K
DE6B3KJ331K
DE6B3KJ471K
DE6B3KJ681K
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
300Vac(r.m.s.)
B
B
B
B
B
B
E
E
E
E
E
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
470pF 10ꢀ
680pF 10ꢀ
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
8.0mm max.
9.0mm max.
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
7.0mm max.
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
A3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
B3B
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
N3A
ppp
ppp
ppp
ppp
ppp
ppp
DE6E3KJ102M
DE6E3KJ152M
DE6E3KJ222M
DE6E3KJ332M
DE6E3KJ472M
1000pF 20ꢀ 7.0mm max.
1500pF 20ꢀ 8.0mm max.
2200pF 20ꢀ 9.0mm max.
3300pF 20ꢀ 10.0mm max.
4700pF 20ꢀ 12.0mm max.
ppp
ppp
ppp
ppp
ppp
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KJ) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
56
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KJ Specifications and Test Methods
Operating Temperature Range: -40 to +125°C
No.
Item
Specifications
Test Method
The caꢀacitor should be visually insꢀected for evidence of
defect1
Dimensions should be measured with slide caliꢀers1
No visible defect, and dimensions are within
sꢀecified range1
1
Appearance and Dimensions
2
3
Marking
To be easily legible
The caꢀacitor should be visually insꢀected1
Capacitance
Within sꢀecified tolerance
The dissiꢀation factor should be measured at 205° with
ꢁ±01ꢁkHꢇ and A°±V(r1m1s1) max1
Char.
Specifications
4
Dissipation Factor (D.F.)
Insulation Resistance (I.R.)
<
B, E
D1F1 21±ꢅ
=
The insulation resistance should be measured with
D°±00±±0V within 60±± sec1 of charging1
The voltage should be aꢀꢀlied to the caꢀacitor through a
resistor of ꢁMΩ1
5
ꢁ0000MΩ min1
No failure
The caꢀacitor should not be damaged when the test voltages
from Table ꢁ are aꢀꢀlied between the lead wires for 60 sec1
Between Lead
Wires
<Table ꢁ>
Type
KJ
Test Voltage
A°2600V(r1m1s1)
First, the terminals of the caꢀacitor
should be connected together1 Then,
as shown in the figure at right, a metal
foil should be closely wraꢀꢀed around
the body of the caꢀacitor to the
distance of about ꢂ to ꢄmm from
each terminal1
Then, the caꢀacitor should be inserted
into a container filled with metal balls
of about ꢁmm diameter1 Finally, A°
Dielectric
Strength
Metal
Foil
about
6
ꢂ to ꢄmm
Metal
Balls
Body
Insulation
No failure
voltage from Table 2 is aꢀꢀlied for 60 sec1 between the
caꢀacitor lead wires and metal balls1
<Table 2>
Type
KJ
Test Voltage
A°2600V(r1m1s1)
The caꢀacitance measurement should be made at each steꢀ
sꢀecified in Table ꢂ1
<Table ꢂ>
Step
ꢁ
2
Temperature (ºC)
20±2
Char.
B
E
Capacitance Change
Within ±ꢁ0ꢅ
-2±±2
20±2
7
Temperature Characteristics
+20
–±±
Within
ꢅ
ꢂ
(Temꢀ1 range: -2± to +8±5°)
ꢄ
±
8±±2
20±2
Pre-treatment:
°aꢀacitor should be stored at ꢁ2±±ꢂ5° for ꢁ hr1, then ꢀlaced
at room conditionꢃ for 2ꢄ±2 hrs1 before initial measurements1
Should be ꢀlaced into steam aging for 8 hrs1±ꢁ± min1 Aꢆer the
steam aging, the lead wire of a caꢀacitor should be diꢀꢀed into
an ethanol solution of 2±ꢅ rosin and then into molten solder
for ±+0/-01± sec1
The deꢀth of immersion is uꢀ to about ꢁ1± to 210mm from the
root of lead wires1
Lead wire should be soldered with uniform coating
on the axial direction over ꢂ/ꢄ of the
circumferential direction1
8
Solderability
9
Temꢀ1 of solder: Lead Free Solder (Sn-ꢂAg-01±°u) 2ꢄ±±±5°
H6ꢂ Eutectic Solder 2ꢂ±±±5°
Appearance
No marked defect
Within ±ꢁ0ꢅ
As shown in the figure, the lead
wires should be immersed in solder
°aꢀacitor
Thermal
Capacitance
Change
Screen
of 260±±5° uꢀ to ꢁ1± to 210mm
ꢁ1±
from the root of terminal for ꢁ0±ꢁ
to 210mm
Resistance to I.R.
Soldering Heat
ꢁ000MΩ min1
sec1
Pre-treatment:
Molten
Solder
9
°aꢀacitor should be stored at
ꢁ2±±ꢂ5° for ꢁ hr1, then ꢀlaced at room conditionꢃ for 2ꢄ±2
hrs1 before initial measurements1
Post-treatment:
Dielectric
Strength
Per Item 6
°aꢀacitor should be stored for ꢁ to 2 hrs1 at room condition1ꢃ
ꢃ "Room condition" Temꢀerature: ꢁ± to ꢂ±5°, Relative humidity: ꢄ± to 7±ꢅ, Atmosꢀheric ꢀressure: 86 to ꢁ06kPa
°ontinued on the following ꢀage1
57
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KJ Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
Test Method
Solder the capacitor and gum
No marked defect
up the body to the test jig
(glass epoxy board) by resin
(adhesive).
Resin (Adhesive)
Capacitance
Within the specified tolerance
The capacitor should be firmly soldered to the supporting lead
wire, 1.5mm in total amplitude, with about a 20 minutes rate of
vibration change from 10Hz to 2000Hz and back to 10Hz.
This motion should be applied 12 times in each of ± mutually
perpendicular directions (total of ±6 times).
10 Vibration
Char.
B, E
Specifications
D.F.
<
D.F. 2.5%
=
The acceleration is 5g max.
Appearance
Capacitance
No marked defect
Solder the capacitor and gum
up the body to the test
jig (glass epoxy board) by resin
Within the specified tolerance
Resin (Adhesive)
(adhesive).
Mechanical
Shock
Char.
B, E
Specifications
11
D.F.
Three shocks in each direction should be applied along ±
mutually perpendicular axes to and from of the test specimen
(1ꢀ shocks).
<
D.F. 5.0%
=
The specified test pulse should be half-sine and should have a
duration: 0.5ms, peak value: 100g and velocity change: 4.7m/s.
I.R.
10000MΩ min.
Appearance
No marked defect
Char.
B
E
Capacitance Change
Within ±10%
Capacitance
Change
Set the capacitor for 1000±12 hrs. at ꢀ5±±°C in ꢀ0 to ꢀ5%
relative humidity.
Within ±15%
Humidity
(Under
Pre-treatment:
12
Steady
State)
Char.
Specifications
Capacitor should be stored at 125±±°C for 1hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
D.F.
I.R.
<
B, E
D.F. 5.0%
=
±000MΩ min.
Per Item 6
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Dielectric
Strength
Appearance
No marked defect
Apply the rated voltage for 1000±12 hrs. at ꢀ5±±°C in ꢀ0 to
ꢀ5% relative humidity.
Char.
B
E
Capacitance Change
Within ±10%
Capacitance
Change
Within ±15%
Humidity
13
Pre-treatment:
Loading
Capacitor should be stored at 125±±°C for 1hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Char.
B, E
Specifications
D.F.
<
D.F. 5.0%
=
Capacitor should be stored for 1 to 2 hrs. at room condition.*
I.R.
±000MΩ min.
Appearance
No marked defect
Impulse Voltage
Each individual capacitor should be subjected to a 5kV
impulses for three times. Then the capacitors are applied to life
test.
Capacitance
Change
Within ±20%
±000MΩ min.
I.R.
100 (%)
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
90
50
±0
0
t
T
T1
T
2
14 Life
Apply a voltage from Table 4 for 1000 hrs. at 125+2/-0°C, and
relative humidity of 50% max.
9
Dielectric
Strength
Per Item 6
<Table 4>
Applied Voltage
AC510V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1 sec.
Pre-treatment:
Capacitor should be stored at 125±±°C for 1hr., then placed
at room condition* for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition.*
* "Room condition" Temperature: 15 to ±5°C, Relative humidity: 45 to 75%, Atmospheric pressure: ꢀ6 to 106kPa
Continued on the following page.
58
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KJ Specifications and Test Methods
Continued ꢂrom the preceding page.
No. Item
Specifications
Test Method
As shown in the figure at right, fix the body
oꢂ the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction oꢂ the capacitor up to ±1N and keep
it ꢂor ±1±± sec.
Tensile
Robustness
15 of
Terminations
W
Lead wire should not be cut off. Capacitor should
not be broken.
Each lead wire should be subjected to 5N oꢂ weight and bent
91ꢁ at the point oꢂ egress, in one direction, then returend to
its original position and bent 91ꢁ in the opposite direction at
the rate oꢂ one bend in ꢀ to 3 sec.
Bending
The capacitor should be individually wrapped in at least one,
but not more than two, complete layers oꢂ cheesecloth. The
capacitor should be subjected to ꢀ1 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained ꢂor ꢀ min. afer the last discharge.
R
F
L±
Lꢀ
S±
C±
Sꢀ UAC
Cꢀ
L3
C3
L4
Cx
Ct
Ut
Tr
Oscilloscope
16 Active Flammability
The cheesecloth should not catch on fire.
C±,ꢀ : ±μF±±10
C3
: 1.133μF±50 ±1kꢃ
L± to 4 : ±.5mH±ꢀ10 ±6A Rod core choke
Ct
Cx
F
: 3μF±50 ±1kꢃ
: Capacitor under test
: Fuse, Rated ±1A
R
: ±11Ω±ꢀ0
: UR±50
: Rated ꢃoltage
UAC
UR
Ut
: ꢃoltage applied to Ct
Ux
5kꢃ
time
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time oꢂ exposure to flame:
31 sec.
Length oꢂ flame : ±ꢀ±±mm
Gas burner
: Length 35mm min.
Inside Dia.
1.5±1.±mm
Outside Dia. 1.9mm max.
: Butane gas Purity 950 min.
The burning time should not exceed 31 sec.
The tissue paper should not ignite.
Gas
17 Passive Flammability
Test Specimen
45ꢁ
Tissue
About ±1mm Thick Board
Appearance
No marked deꢂect
The capacitor should be subjected to ±111 temperature cycles.
9
Char.
B
E
Capacitance Change
Within ±±10
Step
Temperature (ºC)
-55+1/-3
Room temp.
±ꢀ5+3/-1
Time (min)
Capacitance
Change
±
ꢀ
3
4
31
Within ±ꢀ10
3
31
3
Temperature
Cycle
Room temp.
18
Char.
B, E
Specifications
D.F.
I.R.
Cycle time: ±111 cycles
<
D.F. 5.10
=
Pre-treatment:
Capacitor should be stored at ±ꢀ5±3ꢁC ꢂor ± hr., then placed
at room condition* ꢂor ꢀ4±ꢀ hrs.
Post-treatment:
Capacitor should be stored ꢂor ꢀ4±ꢀ hrs. at room condition.*
3111MΩ min.
Per Item 6
Dielectric
Strength
* "Room condition" Temperature: ±5 to 35ꢁC, Relative humidity: 45 to 750, Atmospheric pressure: 86 to ±16kPa
Continued on the ꢂollowing page.
59
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type KJ Specifications and Test Methods
Continued from the preceding page.
No.
Item
Capacitance
Specifications
Test Method
Set the capacitor for ±111±±ꢀ hrs. at ±51±ꢁ°C.
Within ±ꢀ10
Change
High
Pre-treatment:
Temperature
Exposure
(Storage)
19
Capacitor should be stored at ±ꢀ5±ꢁ°C for ± hr., then placed
at room condition* for ꢀ4±ꢀ hrs.
Char.
B, E
Specifications
D.F.
<
D.F. 5.10
=
Post-treatment:
I.R.
±111MΩ min.
Capacitor should be stored for ꢀ4±ꢀ hrs. at room condition.*
No marked defect except color change of outer
coating.
The capacitor should be subjected to ꢁ11 cycles.
Appearance
Step
±
ꢀ
Temperature (ºC)
-55+1/-ꢁ
Time (min)
Char.
B
E
Capacitance Change
Within ±±10
ꢁ1
ꢁ1
Capacitance
Change
±ꢀ5+ꢁ/-1
Thermal
Shock
Within ±ꢀ10
20
Pre-treatment:
Capacitor should be stored at ±ꢀ5±ꢁ°C for ± hr., then placed
at room condition* for ꢀ4±ꢀ hrs.
Post-treatment:
Char.
B, E
Specifications
D.F.
<
D.F. 5.10
=
Capacitor should be stored for ꢀ4±ꢀ hrs. at room condition.*
I.R.
ꢁ111MΩ min.
Appearance
No marked defect
Per MIL-STD-ꢀ1ꢀ Method ꢀ±5
Char.
B
E
Capacitance Change
Within ±±10
Solvent ±: ± part (by volume) of isopropyl alcohol
ꢁ parts (by volume) of mineral spirits
Solvent ꢀ: Terpene defluxer
Capacitance
Change
Within ±ꢀ10
Resistance to
Solvents
21
Solvent ꢁ: 4ꢀ parts (by volume) of water
± part (by volume) of propylene glycol
monomethyl ether
Char.
B, E
Specifications
D.F.
<
D.F. 5.10
=
± part (by volume) of monoethanolomine
I.R.
ꢁ111MΩ min.
Appearance
No marked defect
Apply the rated voltage and DC±.ꢁ+1.ꢀ/-1V (add 6.8kΩ
resistor) at 85±ꢁ°C and 81 to 850 humidity for ±111±±ꢀ hrs.
Char.
B
E
Capacitance Change
Within ±±10
Capacitance
Change
Within ±±50
Biased
Humidity
Pre-treatment:
22
Capacitor should be stored at ±ꢀ5±ꢁ°C for ±hr., then placed
at room condition* for ꢀ4±ꢀ hrs.
Post-treatment:
Char.
B, E
Specifications
D.F.
<
D.F. 5.10
=
Capacitor should be stored for ꢀ4±ꢀ hrs. at room condition.*
I.R.
ꢁ111MΩ min.
Appearance
No marked defect
Apply ꢀ4 hrs. of heat (ꢀ5 to 65°C) and humidity (81 to 980)
treatment shown below, ±1 consecutive times.
Char.
B
E
Capacitance Change
Within ±±10
Capacitance
Change
Pre-treatment:
Capacitor should be stored at ±ꢀ5±ꢁ°C for ± hr., then placed
at room condition* for ꢀ4±ꢀ hrs.
Within ±ꢀ10
Post-treatment:
Capacitor should be stored for ꢀ4±ꢀ hrs. at room condition.*
Char.
Specifications
D.F.
I.R.
<
D.F. 5.10
=
B, E
Humidity Humidity Humidity Humidity Humidity
°C
71
65
61
55
51
45
41
ꢁ5
ꢁ1
ꢀ5
ꢀ1
±5
±1
5
91-980 81-980 91-980 81-980 91-980
Moisture
Resistance
23
+±1
ꢁ111MΩ min.
°C
-ꢀ
9
Initial measurement
1
-5
-±1
One cycle ꢀ4 hours
1 ± ꢀ ꢁ 4 5 6 7 8 9 ±1±±±ꢀ±ꢁ±4±5±6±7±8±9ꢀ1ꢀ±ꢀꢀꢀꢁꢀ4
Hours
* "Room condition" Temperature: ±5 to ꢁ5°C, Relative humidity: 45 to 750, Atmospheric pressure: 86 to ±16kPa
60
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors for Automotive Characteristics Data (Typical Example)
Capacitance - Temperature Characteristics
Insertion Loss - Frequency Characteristics
40
0
20
10
20
0
B
B
-20
(1)
(2)
-40
E
(3)
30
40
50
(4)
-60
(5)
E
(6)
-80
-100
-40
-20
0
20
40
60
80
100
120
140
1
10
100
1000
Temperature (°C)
Frequency (MHz)
Type KJ
(1) 100pF
(2) 220pF
(3) 470pF
(4) 1000pF
(5) 2200pF
(6) 4700pF
Signal power: 1mW
AC240V(r.m.s.) / 60Hz is
applied on the capacitor.
Leakage Current Characteristics
Type KJ (B char.)
Type KJ (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
1.0
0.8
0.6
0.4
0.2
0.0
4.0
4700pF
470pF
220pF
3.0
2.0
1.0
0.0
2200pF
1000pF
100pF
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
61
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors for Automotive Packaging
Taping Specifications
15mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: Nꢀ)
ΔS
O
P2
D
Δh1
T max.
Δh2
P
ød
P1
Marked side
F
*
*
ꢀ.0 max.
H0
øD0
P0
t2
t1
Item
Code
P
N3
15.0 2.0
15.0 0.ꢀ
7.5 1.0
Pitch of component
Pitch of sprocket hole
Lead spacing
P0
F
P2
P1
D
7.5 1.5
Length from hole center to component center
Length from hole center to lead
Body diameter
ꢀ.75 1.0
See the individual product specifications.
ΔS
W
0 2.0
Deviation along tape, leꢀ or right
Carrier tape width
18.0 0.5
W1
H0
9.0 0.5
Position of sprocket hole
+2.0
Lead distance between reference and bottom planes
Protrusion length
18.0
–0
+0.5 to -1.0
4.0 0.1
øD0
ød
t1
Diameter of sprocket hole
Lead diameter
0.6 0.05
0.6 0.ꢀ
Total tape thickness
t2
1.5 max.
7.0 max.
+0
11.0
–1.0
Total thickness, tape and lead wire
Body thickness
T
L
Portion to cut in case of defect
Hold down tape width
W0
W2
e
11.5 min.
1.5 1.5
Hold down tape position
Coating extension on lead
Deviation across tape, front
Deviation across tape, rear
Up to the end of crimp
Δh1
Δh2
2.0 max.
(in mm)
Packaging Styles
Minimum Quantity (Order in Sets Only)
Bulk
Taping
[Bulk]
(pcs./Bag)
Lead Code
Polyethylene Bag
Ammo Pack
Lead Code
Body Dia. D
A3
B3
(mm)
Long
Short
500
7 to 10
12
250
200
250
[Taping]
Lead Code: N3
700pcs./Ammo Pack
62
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors for Automotive Caution
!
Caution (Rating)
!
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p that contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes
these irregular voltages.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected to an atmospheric temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's
characteristics and reliability. (Never attempt to perform
measurement with the cooling fan running. Otherwise,
accurate measurement cannot be ensured.)
3. Test Condition for Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.
63
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors for Automotive Caution
!
Continued from the preceding page.
(2) Voltage Applied Method
When the withstanding voltage is applied, the capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, test
voltage should be applied with the zero cross.* At the
end of the test time, the test voltage should be reduced
to near zero, and then capacitor's lead or terminal should
be taken off the output of the withstanding voltage test
equipment.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, the surge
voltage may rise, and therefore, a defect may be caused.
Voltage sine wave
zero cross
0V
*ZERO CROSS is the point where voltage sine wave
passes 0V. See the figure at right.
4. Fail-Safe
When the capacitor is broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fuming.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
64
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors for Automotive Caution
!
Caution (Storage and Operating Condition)
!
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
Use capacitors within 6 months after delivery.
Check the solderability after 6 months or more.
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. Also, avoid exposure to
moisture. Before cleaning, bonding, or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Caution (Soldering and Mounting)
!
1. Vibration and Impact
3. Bonding, Resin Molding and Coating
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
Please confirm there is no influence of holding
measures on the product with the intended equipment.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specifications of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
For bonding, molding or coating this product, verify
that these processes do not affect the quality of the
capacitor by testing the performance of the bonded,
molded or coated product in the intended equipment.
When the amount of applications, dryness/hardening
conditions of adhesives and molding resins containing
organic solvents (ethyl acetate, methyl ethyl ketone,
toluene, etc). are unsuitable, the outer coating resin
of a capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding resin
or coating may cause outer coating resin cracking
and/or ceramic element cracking of a capacitor in a
temperature cycling.
4. Treatment after Bonding, Resin Molding and Coating
When the outer coating is hot (over 100 degrees C.)
after soldering, it becomes soft and fragile.
Therefore, please be careful not to give it mechanical
stress.
Soldering the capacitor with a soldering iron should
be performed in the following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Soldering time: 3.5 sec. max.
Caution (Handling)
!
Vibration and Impact
Please confirm there is no influence of holding
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
measures on the product with the intended equipment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
65
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
Note
C85E.pdf
May 17,2016
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors for Automotive Notice
Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
Notice (Rating)
1. Capacitance Change of Capacitors
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
change greatly depending on the surrounding
temperature or an applied voltage. Therefore,
it is not likely to be suitable for use in a constant
time circuit.
Please contact us if you need detailed information.
2. Performance Check by Equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 ceramic capacitors
have voltage dependence characteristics and
temperature dependence characteristics in
capacitance. Therefore, the capacitance value may
change depending on the operating condition in the
equipment. Therefore, be sure to confirm the
apparatus performance of receiving influence in
the capacitance value change of a capacitor,
such as leakage current and noise suppression
characteristic.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
66
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
C85E.pdf
May 17,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications
Manufacturing plants that produce the products in this
catalog have obtained the ISO9000 quality system certificate.
Plant
Applied Standard
Izumo Murata Manufacturing Co., Ltd.
Murata Electronics (Thailand), Ltd.
Taiwan Murata Electronics Co., Ltd.
ISO9001
ISO9001
ISO9001
67
C85E.pdf
May 17,2016
Cat. No. C85E-5
Global Locations
For details please visit www.murata.com
Note
1 Export Control
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
3 Product specifications in this catalog are as
of March 2016. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
1
2
3
4
5
6
Aircraf equipment
Aerospace equipment
Undersea equipment
Power plant equipment
Medical equipment
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
Transportation equipment (vehicles, trains,
ships, etc.)
7
8
Traffic signal equipment
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10 Application oꢀ similar complexity and/or
reliability requirements to the applications
listed above
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Murata Manufacturing Co., Ltd.
www.murata.com
相关型号：
DEF2CLH090DJ3B
CAPACITOR, CERAMIC, 6300V, CH, 0.000009uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
MURATA
©2020 ICPDF网 联系我们和版权申明