DLW43SH110XK2B [MURATA]
Ferrite Chip, 2 Function(s), 50V, 0.36A, EIA STD PACKAGE SIZE 1812, 4 PIN;型号: | DLW43SH110XK2B |
厂家: | muRata |
描述: | Ferrite Chip, 2 Function(s), 50V, 0.36A, EIA STD PACKAGE SIZE 1812, 4 PIN 数据线路滤波器 过滤器 PC |
文件: | 总40页 (文件大小:1492K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
/
p
p
DL PL
Chip Common Mode Choke Coil
Large Current Common Mode Choke Coil for Automotive Available
Series Introduction
Part Numbering
Series Line Up
Product Detail
!Caution/Notice
Soldering and Mounting
Packaging
150
152
154
156
174
176
182
184
Design Kits
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
Series Introduction
DL
p
Common Mode Current
Magnetic flux by common mode current is
added each other and works as an inductor
Differential Mode Current
Magnetic flux by differential mode current is
canceled each other and do not works as an
inductor
Features,
Category
Structure
Part Number
DLP11SA
Comments
Classification
· Low profile, small size, suitable for mobile
equipments.
· Tight terminal pitch enables high density layout.
· Ultra high cut-off frequency and its matching to line
impedance enables good transmission of high
speed signal.
Film type
Ultra high cut-off
frequency
for high speed
differential signal lines
· Ultra high self resonance frequency enables high
cut-off frequency.
· Its matching to line impedance enables good
transmission of high speed signal.
Wound type
Film type
DLW21SN_HQ2
High cut-off frequency
High Coupling
· Low profile, small size, suitable for mobile
equipments.
· Tight terminal pitch enables high density layout.
· High cut-off frequency enables good transmission
of high speed signal.
For high speed
differential signal lines
DLP0NS
DLP11SN
DLP2AD
(
)
High cut-off frequency
for high speed
differential signal lines
DLW21SN_SQ2
DLW31S
DLW21H
· Ultra high self resonance frequency enables high
cut-off frequency.
· DLW21H is designed as low profile.
Wound type
Film type
· Low profile,small size, suitable for mobile
equipments.
· Tight terminal pitch enables high density layout.
for general differential
signal lines
DLP31S
DLP31D
DLW5AH
DLW5BS
DLW5BT
Large current
High coupling
(For power lines)
· Large current (6A max.), suitable for input
connector from an AC adaptor.
· DLW5BT is designed as low profile.
Wound type
· Modified its differential mode impedance higher
than other common mode choke coils, this feature
makes possible to suppress both common mode
and differential mode noise.
· DLM11GN601SD2 is ideal to keep low distortion
audio signal.
Relative high differential
mode impedance
Low coupling
DLM11G
DLM2HG
Multilayer
type
(For audio lines)
· DLM2HG can meet stereo 3 lines which contain a
ground line.
Large current
Automotive Available Available up to 10A
(For power lines)
Winding type
Cased structure
· Large current, high reliability, suitable for mortors in
automobile.
PLT10HH
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
150
Noise
Suppression
Example
DLP/DLW Series
Mechanism of Skew Improvement
Waveform rises (or falls)
Skew Improve Effect of Common Mode Choke Coil
Example of Skew Improvement by Common Mode Choke Coil
(Test using pulse generator waveform)
Waveform is equivalent to 1000Mbps signal
Current change generates
magnetic flux on a ferrite core
Waveform with intentionally made skew (skew: 100ps)
Skew is improved by common mode choke coil
Electromotive force is
generated on another line
This electromotive force works to
decrease the delay of waveform
Noise Suppression of Common Mode Choke Coil in HDMI Line
Device under test / Transmitter : game machine Receiver : projector
Cable / HDMI categoly2 3m cable
Test resolution / 1080p Deep color 12bit (Data 1.11GHz) DVD play mode
60
55
50
45
40
35
30
25
20
60
55
50
45
40
35
30
25
20
Without filter
DLW21SN900HQ2
Without filter
DLP11SA900HL2
1000 1500 2000 2500 3000 3500 4000 4500 5000
1000 1500 2000 2500 3000 3500 4000 4500 5000
Frequency (MHz)
Frequency (MHz)
Film Type DLP11SN900HL2
(Cut-off frequency is most low in the table below)
ESD protection device only
Test Example of HDMI1.3
Waveform Transmission
~Using ESD protection device 0.05pF~
Signal frequency : 1.11GHz (Deep color 12bit)
Specification
satisfied
Video signal generator
CLOCK
Wound Type
Film Type
Film Type Array
DLW21SN900HQ2
DLP11SA900HL2
DLP2ADN900HL4
DATA
Over 10GHz
Around 4GHz
Cut-off Frequency
Around 6GHz
common mode choke coil ESD protection device 0.05pF
Specification satisfied
Specification satisfied
Specification satisfied
Judge
Rise time: 83.4ps
Fall time: 77.4ps
Rise time: 90.4ps
Fall time: 85.5ps
Rise time: 100ps
Fall time: 97.4ps
Transition Time
Each of common mode choke coil can keep waveform, satisfy the specification.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
151
DLp Chip Common Mode Choke Coil
Part Numbering
(Part Number)
DL
W
21 S
N
371 S
Q
2 L
q
w
e r t
y
u i o !
0
qProduct ID
Product ID
DL
tCategory
Code
A
Category
Chip Common Mode Choke Coils
B
wStructure
C
Expressed by a letter.
Code
W
Structure
Wire Wound Type
Multilayer Type
Film Type
N
R
M
P
yImpedance
Typical impedance at 100MHz is expressed by three figures. The
unit is in ohm (Ω). The first and second figures are significant
digits, and the third figure expresses the number of zeros which
follow the two figures.
eDimensions (LgW)
Code
0N
11
Dimensions (LgW)
0.85g0.65mm
1.25g1.0mm
1.5g0.65mm
2.0g1.2mm
EIA
03025
0504
05025
0805
1206
0804
1008
2014
2020
uCircuit
1N
21
Code
S
Circuit
31
3.2g1.6mm
M
Expressed by a letter.
2A
2H
5A
5B
2.0g1.0mm
H
2.5g2.0mm
U
5.0g3.6mm
5.0g5.0mm
iFeatures (2)
Code
Features
rFeatures (1)
D
L
Code
S
Type
Expressed by a letter.
Magnetically Shielded One Circuit Type
Magnetically Shielded Two Circuit Type
Open Magnetic One Circuit Type
Q
Z
D
H
G
T
Magnetically Monolithic Type (sectional winding)
Magnetically Shielded One Circuit Low Profile Type
oNumber of Signal Lines
Code
Number of Signal Lines
Two Lines
2
3
4
Three Lines
Four Lines
!Packaging
Code
Packaging
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Series
K
L
DLW5AH/DLW5BS/DLW5BT
All Series
B
All Series
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
152
PL p Common Mode Choke Coils
Part Numbering
(Part Number)
PL T 10H H 102 6R0 P N B
q w
e
r
t
y
u i o
qProduct ID
Product ID
PL
tImpedance
Expressed by three figures. The unit is ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Common Mode Choke Coils
wType
Code
T
yRated Current
Expressed by three figures. The unit is ampere (A). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
A decimal point is expressed by the capital letter "R". In this case,
all figures are significant digits.
Type
DC Type
eApplications
Code
Applications
10H
for DC Line High-frequency Type
uWinding Mode
Code
Winding Mode
rFeatures
Code
Aligned Winding Type
P
Features
H
for Automotive
iLead Dimensions
Code
Lead Dimensions
N
No Lead Terminal (SMD)
oPackaging
Code
Packaging
Bulk
Series
B
L
PLT10H
PLT10H
PLT10H
Embossed Taping (ø178mm/ø180mm Reel)
Embossed Taping (ø330mm Reel)
K
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
153
p Chip Common Mode Choke Coil
Series Line Up
DL
Size Code Thickness
Common Mode Impedance
(at 100MHz/20°C)
600ohm±25%
600ohm±25%
67ohm±20%
90ohm±20%
120ohm±20%
15ohm±5ohm
28ohm±20%
67ohm±20%
120ohm±20%
160ohm±20%
90ohm±20%
200ohm±20%
240ohm±20%
280ohm±20%
330ohm±20%
35ohm±20%
67ohm±20%
90ohm±20%
80ohm±25%
120ohm±20%
220ohm±20%
550ohm±20%
35ohm±20%
67ohm±20%
90ohm±20%
35ohm±20%
67ohm±20%
90ohm±20%
67ohm±20%
90ohm±20%
120ohm±20%
160ohm±20%
200ohm±20%
240ohm±20%
280ohm±20%
90ohm±20%
130ohm±20%
200ohm±20%
320ohm±20%
440ohm±20%
67ohm±25%
90ohm±25%
120ohm±25%
180ohm±25%
260ohm±25%
370ohm±25%
67ohm±25%
90ohm±25%
120ohm±25%
67ohm±25%
67ohm±25%
90ohm±25%
120ohm±25%
180ohm±25%
90ohm±25%
160ohm±25%
260ohm±25%
600ohm±25%
1000ohm±25%
2200ohm±25%
Type
Part Number
Rated Current
(Inch)
(mm)
0.5
p158
0504
1008
DLM11GN601SD2
DLM2HGN601SZ3
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
DLP0NSA150HL2
DLP0NSC280HL2
DLP11SN670SL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SN900HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11SA350HL2
DLP11SA670HL2
DLP11SA900HL2
DLP11TB800UL2
DLP31SN121ML2
DLP31SN221ML2
DLP31SN551ML2
DLP1NDN350HL4
DLP1NDN670HL4
DLP1NDN900HL4
DLP2ADA350HL4
DLP2ADA670HL4
DLP2ADA900HL4
DLP2ADN670HL4
DLP2ADN900HL4
DLP2ADN121HL4
DLP2ADN161HL4
DLP2ADN201HL4
DLP2ADN241HL4
DLP2ADN281HL4
DLP31DN900ML4
DLP31DN131ML4
DLP31DN201ML4
DLP31DN321ML4
DLP31DN441ML4
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SR670HQ2
DLW21HN670SQ2
DLW21HN900SQ2
DLW21HN121SQ2
DLW21HN181SQ2
DLW31SN900SQ2
DLW31SN161SQ2
DLW31SN261SQ2
DLW31SN601SQ2
DLW31SN102SQ2
DLW31SN222SQ2
100mA
100mA
110mA
100mA
90mA
100mA
100mA
180mA
140mA
120mA
150mA
110mA
100mA
90mA
Multilayer Type
for Audio Lines
p159
p160
1.2
0.45
0.45
0.45
0.45
0.45
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.3
1.15
1.15
1.15
0.45
0.45
0.45
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
1.15
1.15
1.15
1.15
1.15
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
0.9
0.9
0.9
0.9
1.9
1.9
1.9
03025
p162
Film Type
for Differential
Signal Lines
0504
80mA
170mA
150mA
150mA
100mA
100mA
100mA
100mA
100mA
80mA
p163
p164
1206
p165
05025
60mA
p166
150mA
130mA
120mA
140mA
130mA
120mA
100mA
90mA
80mA
80mA
160mA
120mA
100mA
80mA
0804
Film Array Type
for Differential
Signal Lines
p168
1206
70mA
p169
400mA
330mA
370mA
330mA
300mA
280mA
320mA
280mA
280mA
400mA
330mA
330mA
280mA
250mA
370mA
340mA
310mA
260mA
230mA
200mA
0805
Wire Wound Type
for Differential
Signal Lines
p171
p172
1206
1.9
1.9
1.9
Continued on the following page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
154
DLp Chip Common Mode Choke Coil
Series Line Up
Size Code Thickness
Common Mode Impedance
Type
Part Number
Rated Current
(Inch)
(mm)
4.3
4.5
4.5
4.5
4.5
4.5
2.5
2.5
2.5
2.5
2.5
(at 100MHz/20°C)
4000ohm(Typ.)
190ohm(Typ.)
350ohm(Typ.)
1000ohm(Typ.)
1500ohm(Typ.)
3000ohm(Typ.)
100ohm(Typ.)
250ohm(Typ.)
500ohm(Typ.)
1000ohm(Typ.)
1400ohm(Typ.)
p156
2014
DLW5AHN402SQ2
DLW5BSN191SQ2
DLW5BSN351SQ2
DLW5BSN102SQ2
DLW5BSN152SQ2
DLW5BSN302SQ2
DLW5BTN101SQ2
DLW5BTN251SQ2
DLW5BTN501SQ2
DLW5BTN102SQ2
DLW5BTN142SQ2
200mA
5000mA
2000mA
1500mA
1000mA
500mA
6000mA
5000mA
4000mA
2000mA
1500mA
p156
Wire Wound Type
for Power Lines
and Signal Lines
2020p157
Large Current Common Mode Choke Coil for Automotive Available
Series Line Up
p
PL
Thickness
(mm)
9.4
Common Mode Impedance
(at 10MHz/20°C)
400ohm
Type
Size
Part Number
Rated Current
p173
PLT10HH401100PN
PLT10HH501100PN
PLT10HH9016R0PN
PLT10HH1026R0PN
10A
10A
6A
Large Current
9.4
9.4
9.4
500ohm
900ohm
1000ohm
Common Mode Choke Coil 12.9x6.6
for Automotive Available
(mm)
6A
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
155
DLW Series
Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil
DLW5AH/DLW5BS
/
DLW5AH DLW5BSSeries (2014/ 2020 Size)
5A max, common mode choke coil for power lines.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
DLW5AH
(2)
(3)
(1)
*
*
0.5 min.
(4)
No polarity.
(W) 3.6±0.3
(L) 5.0±0.3
(1)
(2)
ꢀꢀPackaging
Starting position of wiring should
be covered with resin.
*
Minimum
Quantity
Code
Packaging
L
K
B
180mm Reel Embossed Tape
330mm Reel Embossed Tape
Bulk(Bag)
400
1500
100
: Electrode
(in mm)
(4)
(3)
1.3 0.9 1.3
±0.3 ±0.3 ±0.3
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
DLW5BS
* The marking to
indicate the product
direction can be
applicable.
Polarity Marking
(2)
(3)
(1)
(Optional)
(4)
No polarity.
3.6±0.3
0.5 min.
ꢀꢀPackaging
(W) 5.0±0.3
(L) 5.0±0.3
(1)
(2)
Minimum
Quantity
Code
Packaging
L
K
B
180mm Reel Embossed Tape
330mm Reel Embossed Tape
Bulk(Bag)
400
1500
100
: Electrode
(in mm)
(4)
(3)
1.3±0.3
0.9±0.3
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current Rated Voltage
Withstand Voltage DC Resistance
(at 100MHz/20°C)
DLW5AHN402SQ2p
DLW5BSN191SQ2p
DLW5BSN351SQ2p
DLW5BSN102SQ2p
DLW5BSN152SQ2p
DLW5BSN302SQ2p
4000ohm(Typ.)
190ohm(Typ.)
350ohm(Typ.)
1000ohm(Typ.)
1500ohm(Typ.)
3000ohm(Typ.)
200mA
5000mA
2000mA
1500mA
1000mA
500mA
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
125Vdc
125Vdc
125Vdc
125Vdc
125Vdc
125Vdc
3.0ohm max.
0.02ohm max.
0.04ohm max.
0.06ohm max.
0.1ohm max.
0.3ohm max.
Operating Temperature Range: -25°C to +85°C (DLW5AH), -40°C to +85°C (DLW5BS) Number of Circuit: 1
ꢀꢀImpedance-Frequency Characteristics (Main Items)
100000
ꢀꢀDerating of Rated Current
DLW5BSN191
DLW5BSN191SQ2 Temperature Derating
5
4.75
4.5
10000
1000
DLW5AHN402SQ2
DLW5BSN302SQ2
DLW5BSN152SQ2
DLW5BSN102SQ2
DLW5BSN351SQ2
DLW5BSN191SQ2
Common mode
100
10
DLW5AHN402SQ2
DLW5BSN302SQ2
DLW5BSN152SQ2
DLW5BSN102SQ2
DLW5BSN351SQ2
DLW5BSN191SQ2
Differential mode
1
10
100
1000
Frequency (MHz)
0
10
20
30
40
50
60
70
80
90
100
75°C
85°C
Operating Temperature (°C)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
156
DLW Series
Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil
DLW5BT
DLW5BTSeries (2020 Size)
Low profile wire-wound common choke coil for power lines.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(2)
(3)
* The marking to
indicate the product
direction can be
applicable.
(1)
Polarity Marking
(Optional)
(4)
No polarity.
3.6±0.3
0.5 min.
(W) 5.0±0.3
ꢀꢀPackaging
(L) 5.0±0.3
(1)
(2)
Minimum
Quantity
Code
Packaging
L
K
B
180mm Reel Embossed Tape
330mm Reel Embossed Tape
Bulk(Bag)
700
2500
100
: Electrode
(in mm)
(4)
(3)
1.3±0.3
0.9±0.3
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current Rated Voltage
Withstand Voltage DC Resistance
(at 100MHz/20°C)
DLW5BTN101SQ2p
DLW5BTN251SQ2p
DLW5BTN501SQ2p
DLW5BTN102SQ2p
DLW5BTN142SQ2p
100ohm(Typ.)
250ohm(Typ.)
500ohm(Typ.)
1000ohm(Typ.)
1400ohm(Typ.)
6000mA
5000mA
4000mA
2000mA
1500mA
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
125Vdc
125Vdc
125Vdc
125Vdc
125Vdc
0.009ohm±40%
0.014ohm±40%
0.019ohm±40%
0.024ohm±40%
0.040ohm±40%
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
ꢀꢀImpedance-Frequency Characteristics (Main Items)
ꢀꢀDerating of Rated Current
10000
DLW5BTN101/251/501
Common mode
7000
DLW5BTN142SQ2
DLW5BTN102SQ2
1000
6000
DLW5BTN501SQ2
DLW5BTN251SQ2
5000
4750
DLW5BTN101SQ2
100
4000
3400
3000
10
2000
1000
0
DLW5BTN101SQ2
DLW5BTN251SQ2
DLW5BTN501SQ2
DLW5BTN102SQ2
DLW5BTN142SQ2
Differential mode
1
1
10
100
1000
0
20
40
60
80
100
Frequency (MHz)
65
85
Temperature (°C)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
157
DLM Series
Signal Lines Type Chip Common Mode Choke Coil
DLM11G
DLM11GSeries (0504 Size)
Audio line common choke also effective to differential mode.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(2)
(3)
(1)
(1)
(4)
(2)
(4)
No polarity.
(3)
0.2±0.15
1.0±0.15
0.5±0.1
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
: Electrode
(in mm)
D
B
180mm Reel Paper Tape
Bulk(Bag)
10000
1000
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Common Mode Impedance
Part Number
Rated Current Rated Voltage Insulation Resistance (min.)
Withstand Voltage
DC Resistance
(at 100MHz/20°C)
DLM11GN601SD2p
600ohm±25%
100mA
5Vdc
100M ohm
25Vdc
0.8ohm max.
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
ꢀꢀImpedance-Frequency Characteristics (Main Items)
10000
DLM11GN601SD2
Differential Mode
1000
100
Common Mode
DLM11GN601SD2
10
1
1
10
100
1000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
158
DLM Series
Signal Lines Type Chip Common Mode Choke Coil
DLM2HG
DLM2HGSeries (1008 Size)
3 line audio common mode choke coil.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(1) (3) (5)
(1)
(3)
(5)
No polarity.
(2)
(4)
(6)
(2)
(4)
(6)
2.0±0.2
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
L
180mm Reel Embossed Tape
Bulk(Bag)
3000
1000
: Electrode
(in mm)
0.8±0.1
0.4±0.2
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Common Mode Impedance
Part Number
Rated Current Rated Voltage
100mA 16Vdc
Resistance
(min.)
Withstand Voltage DC Resistance
100Vdc 0.40ohm max.
(at 100MHz/20°C)
DLM2HGN601SZ3p
600ohm±25%
100M ohm
Operating Temperature Range: -55°C to +85°C Number of Circuit: 1
ꢀꢀImpedance-Frequency Characteristics (Main Items)
10000
Differential Mode
DLM2HGN601SZ3
1000
100
DLM2HGN601SZ3
Common Mode
10
1
1
10
100
1000
10000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
159
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP0NS
DLP0NSSeries (03025 Size)
03025 size, very small chip common mode choke coil, Cut-off frequency 3GHz max.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
0.27±0.1
(2)
(1)
(3)
(4)
No polarity.
(1)
(2)
ꢀꢀPackaging
(3)
(4)
Minimum
Quantity
+0.05
–0.10
Code
Packaging
0.20
0.65±0.05
L
180mm Reel Embossed Tape
Bulk(Bag)
5000
500
: Electrode
(in mm)
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current
Rated Voltage
Withstand Voltage
DC Resistance
(at 100MHz/20°C)
DLP0NSN670HL2p
DLP0NSN900HL2p
DLP0NSN121HL2p
DLP0NSA150HL2p
DLP0NSC280HL2p
67ohm±20%
90ohm±20%
120ohm±20%
15ohm±5ohm
28ohm±20%
110mA
100mA
90mA
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
2.4ohm±25%
3.0ohm±25%
3.8ohm±25%
0.95ohm±25%
1.3ohm±25%
100mA
100mA
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics (Main Items)
DLP0NSN 670/900/121 HL2
DLP0NSA150HL2/DLP0NSC280HL2
10000
10000
Common Mode
DLP0NSN121HL2
1000
1000
DLP0NSN900HL2
Common Mode
DLP0NSN670HL2
100
DLP0NSC280HL2
100
DLP0NSA150HL2
DLP0NSN121HL2
10
10
DLP0NSC280HL2
DLP0NSA150HL2
DLP0NSN900HL2
DLP0NSN670HL2
Differential Mode
1000 10000
Differential Mode
1
1
1
10
100
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
ꢀꢀDifferential Mode Transmission Characteristics (Typ.)
DLP0NSN900HL2
DLP0NSA150HL2
0
0
2
2
4
DLP0NSN900HL2
DLP0NSA150HL2
4
6
6
8
8
10
10
1
10
100
1000
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
160
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP0NS
DLP0NS Series (03025 Size)
ꢀꢀDifferential Mode Transmission Characteristics (Typ.)
DLP0NSC280HL2
0
2
DLP0NSC280HL2
4
6
8
10
1
10
100
1000
10000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
161
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP11S/11T
/
DLP11S DLP11TSeries (0504 Size)
6GHz cut-off frequency (for HDMI) is available.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
0.3±0.1
(2)
(3)
(1)
(4)
No polarity.
Part Number
T
(1)
(4)
DLP11S 0.82±0.1
DLP11T 0.3±0.05
ꢀꢀPackaging
(2)
(3)
Minimum
Quantity
Code
Packaging
180mm Reel
Embossed Tape
3000 (DLP11S)
5000 (DLP11T)
+0.1
0.25
L
–0.05
: Electrode
(in mm)
1.25±0.1
B
Bulk(Bag)
500
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current
Rated Voltage
Withstand Voltage
DC Resistance
(at 100MHz/20°C)
DLP11SN670SL2p
DLP11SN121SL2p
DLP11SN161SL2p
DLP11SN900HL2p
DLP11SN201HL2p
DLP11SN241HL2p
DLP11SN281HL2p
DLP11SN331HL2p
DLP11SA350HL2p
DLP11SA670HL2p
DLP11SA900HL2p
67ohm±20%
120ohm±20%
160ohm±20%
90ohm±20%
200ohm±20%
240ohm±20%
280ohm±20%
330ohm±20%
35ohm±20%
67ohm±20%
90ohm±20%
180mA
140mA
120mA
150mA
110mA
100mA
90mA
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
1.3ohm±25%
2.0ohm±25%
2.7ohm±25%
1.5ohm±25%
3.1ohm±25%
3.5ohm±25%
4.2ohm±25%
4.9ohm±25%
0.9ohm±25%
1.2ohm±25%
80mA
170mA
150mA
150mA
1.4ohm±25%
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics
DLP11SN Series
DLP11SA Series
1000
100
10
10000
Common mode
DLP11SN331HL2
1000
100
10
DLP11SN281HL2
Common mode
DLP11SN241HL2
DLP11SN201HL2
DLP11SN161SL2
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
DLP11SN121SL2
DLP11SN900HL2
DLP11SN670SL2
DLP11SN331HL2
DLP11SN281HL2
DLP11SN241HL2
DLP11SN201HL2
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
DLP11SN161SL2
DLP11SN121SL2
DLP11SN900HL2
DLP11SN670SL2
Differential mode
Differential mode
1000 10000
1
1
1
10
100
Frequency (MHz)
1
10
100
1000
10000
Frequency (MHz)
Continued on the following page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
162
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP11S/11T
DLP11S/11T Series (0504 Size)
ꢀꢀDifferential Mode Transmission Characteristics (Typ.)
DLP11SN Series
DLP11SA Series
0
0
DLP11SA900HL2
2
4
2
DLP11SN900HL2
4
6
6
8
8
10
10
1
10
100
Frequency (MHz)
1000
10000
1
10
100
1000
10000
Frequency (MHz)
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current
Rated Voltage
Withstand Voltage
DC Resistance
(at 100MHz/20°C)
DLP11TB800UL2p
80ohm±25%
100mA
5Vdc
100M ohm
12.5Vdc
1.5ohm±25%
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
Differential mode to common mode conversion characteristic (Scd21) at 2.5GHz: -40dB (typ.)
Impedance Characteristics between signal lines Z0 (TDR at 50ps): 90ohm±15ohm
ꢀꢀImpedance-Frequency Characteristics
ꢀꢀDifferential Mode Transmission Characteristics
DLP11TB Series
DLP11TB Series
1000
0
Common Mode
DLP11TB800UL2
2
100
DLP11TB800UL2
4
6
DLP11TB800UL2
10
8
Differential Mode
1000
1
10
1
10
100
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
163
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP31S
DLP31SSeries (1206 Size)
1206 size film type chip common mode choke coil.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
0.7±0.2
(2)
(3)
(1)
1.6±0.15
(2.1)
(4)
3.2±0.15
No polarity.
(1)
(4)
(2)
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
(3)
L
180mm Reel Embossed Tape
Bulk(Bag)
3000
500
: Electrode
(in mm)
0.3±0.2
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Common Mode Impedance
Part Number
Rated Current Rated Voltage
Resistance
Withstand Voltage DC Resistance
(at 100MHz/20°C)
(min.)
DLP31SN121ML2p
DLP31SN221ML2p
DLP31SN551ML2p
120ohm±20%
220ohm±20%
550ohm±20%
100mA
100mA
100mA
16Vdc
16Vdc
16Vdc
100M ohm
40Vdc
40Vdc
40Vdc
2.0ohm max.
2.5ohm max.
100M ohm
100M ohm
3.6ohm max.
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics (Main Items)
10000
1000
DLP31SN551ML2
DLP31SN221ML2
DLP31SN121ML2
100
Common mode
10
DLP31SN121ML2
DLP31SN221ML2
DLP31SN551ML2
Differential mode
1
1
10
100
1000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
164
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP1ND
DLP1NDSeries (0502 Size)
2 circuits in 05025 size, adapt to HDMI line.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(1)
(2)
(3)
(4)
0.2±0.1
0.4±0.1
(5)
(6)
(7)
(8)
(1)
(5)
(2)
(6)
(3)
(7)
(4)
(8)
No polarity.
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
1.5±0.1
L
180mm Reel Embossed Tape
Bulk(Bag)
5000
500
: Electrode
(in mm)
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Common Mode Impedance
Part Number
Rated Current Rated Voltage Resistance Withstand Voltage DC Resistance
(min.)
(at 100MHz/20°C)
DLP1NDN350HL4p
DLP1NDN670HL4p
DLP1NDN900HL4p
35ohm±20%
67ohm±20%
90ohm±20%
100mA
80mA
60mA
5Vdc
5Vdc
5Vdc
100M ohm
100M ohm
100M ohm
12.5Vdc
12.5Vdc
12.5Vdc
1.8ohm±25%
2.9ohm±25%
3.7ohm±25%
Operating Temperature Range: -40°C to +85°C Number of Circuit: 2
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics
10000
ꢀꢀDifferential Mode Transmission Characteristics
0
Common mode
-2
1000
DLP1NDN900HL4
DLP1NDN900HL4
DLP1NDN670HL4
-4
-6
DLP1NDN350HL4
100
DLP1NDN350HL4
10
DLP1NDN670HL4
-8
DLP1NDN900HL4
Differential mode
-10
1
1
10
100
1000
10000
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
165
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP2AD
DLP2ADSeries (0804 Size)
2 circuit built-in, 0804 size, HDMI adapted type available, cut-off frequency 6GHz max.
ꢀꢀDimensions
0.25±0.1
ꢀꢀEquivalent Circuit
(1)
(2)
(3)
(4)
0.5±0.1
(1)
(5)
(2)
(6)
(3)
(7)
(4)
(8)
(5)
(6)
(7)
(8)
No polarity.
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
2.0±0.1
L
180mm Reel Embossed Tape
Bulk(Bag)
3000
500
: Electrode
(in mm)
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated
Current
Rated
Voltage
Withstand
DC Resistance
Voltage
(at 100MHz/20°C)
DLP2ADA350HL4p
DLP2ADA670HL4p
DLP2ADA900HL4p
DLP2ADN670HL4p
DLP2ADN900HL4p
DLP2ADN121HL4p
DLP2ADN161HL4p
DLP2ADN201HL4p
DLP2ADN241HL4p
DLP2ADN281HL4p
35ohm±20%
67ohm±20%
90ohm±20%
67ohm±20%
90ohm±20%
120ohm±20%
160ohm±20%
200ohm±20%
240ohm±20%
280ohm±20%
150mA
130mA
120mA
140mA
130mA
120mA
100mA
90mA
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
5Vdc
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
100M ohm
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
12.5Vdc
0.8ohm±25%
1.0ohm±25%
1.4ohm±25%
1.3ohm±25%
1.7ohm±25%
2.0ohm±25%
2.5ohm±25%
3.2ohm±25%
3.8ohm±25%
80mA
80mA
4.6ohm±25%
Operating Temperature Range: -40°C to +85°C Number of Circuit: 2
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics (Main Items)
DLP2ADA Series
DLP2ADN Series
10000
1000
Common Mode
Common mode
DLP2ADA900HL4
DLP2ADN281HL4
DLP2ADN241HL4
DLP2ADN201HL4
1000
100
10
DLP2ADA670HL4
100
DLP2ADN161HL4
DLP2ADN121HL4
DLP2ADN900HL4
DLP2ADA350HL4
DLP2ADN670HL4
DLP2ADA900HL4
10
DLP2ADN281HL4
DLP2ADN241HL4
DLP2ADN201HL4
DLP2ADN161HL4
DLP2ADN121HL4
DLP2ADA670HL4
DLP2ADA350HL4
Differential mode
Differential Mode
1000 10000
DLP2ADN670HL4
10
DLP2ADN900HL4
1
1
1
10
100
1
100
1000 10000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
166
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP2AD
DLP2AD Series (0504 Size)
ꢀꢀDifferential Mode Transmission Characteristics (Typ.)
DLP2ADA Series
DLP2ADN Series
0
0
2
4
6
8
2
DLP2ADA900HL4
DLP2ADN900HL4
DLP2ADA670HL4
DLP2ADA350HL4
4
6
8
10
10
10
100
1000
10000
1
10
100
Frequency (MHz)
1000
10000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
167
DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP31D
DLP31DSeries (1206 Size)
2 circuit built-in, 1206 size, meet IEEE1394,USB,LVDS.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(1)
(2)
(3)
(4)
0.4±0.2
0.8±0.1
(5)
(6)
(7)
(8)
(1)
(2)
(3)
(4)
No polarity.
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
(5)
(6)
(8)
(7)
: Electrode
(in mm)
L
180mm Reel Embossed Tape
Bulk(Bag)
3000
500
3.2±0.15
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Common Mode Impedance
Part Number
Rated Current Rated Voltage
Resistance
Withstand Voltage DC Resistance
(at 100MHz/20°C)
(min.)
DLP31DN900ML4p
DLP31DN131ML4p
DLP31DN201ML4p
DLP31DN321ML4p
DLP31DN441ML4p
90ohm±20%
130ohm±20%
200ohm±20%
320ohm±20%
440ohm±20%
160mA
120mA
100mA
80mA
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
100M ohm
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
1.1ohm max.
1.1ohm max.
2.2ohm max.
3.5ohm max.
100M ohm
100M ohm
100M ohm
100M ohm
70mA
4.3ohm max.
Operating Temperature Range: -40°C to +85°C Number of Circuit: 2
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics (Main Items)
10000
Common mode
DLP31DN441ML4
1000
100
10
DLP31DN321ML4
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4
DLP31DN441ML4
DLP31DN321ML4
DLP31DN900ML4
DLP31DN131ML4
DLP31DN201ML4
Differential mode
1000
1
1
10
100
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
168
DLW Series
Signal Lines Type Chip Common Mode Choke Coil
DLW21S
DLW21SSeries (0805 Size)
Wire-wound common choke, HDMI available type prepaird.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(2)
(3)
(1)
(4)
2.0±0.2
1.2±0.2
No polarity.
(1)
(2)
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
(4)
(3)
L
180mm Reel Embossed Tape
Bulk(Bag)
2000
500
: Electrode
(in mm)
(0.45)
(0.45)
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current
Rated Voltage
Withstand Voltage
DC Resistance
(at 100MHz/20°C)
DLW21SN670SQ2p
DLW21SN900SQ2p
DLW21SN121SQ2p
DLW21SN181SQ2p
DLW21SN261SQ2p
DLW21SN371SQ2p
DLW21SN670HQ2p
DLW21SN900HQ2p
DLW21SN121HQ2p
DLW21SR670HQ2p
67ohm±25%
90ohm±25%
120ohm±25%
180ohm±25%
260ohm±25%
370ohm±25%
67ohm±25%
90ohm±25%
120ohm±25%
67ohm±25%
400mA
330mA
370mA
330mA
300mA
280mA
320mA
280mA
280mA
400mA
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
20Vdc
20Vdc
20Vdc
20Vdc
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
125Vdc
125Vdc
125Vdc
125Vdc
125Vdc
125Vdc
50Vdc
0.25ohm max.
0.35ohm max.
0.45ohm max.
0.35ohm max.
0.40ohm max.
0.45ohm max.
0.31ohm max.
0.41ohm max.
0.41ohm max.
50Vdc
50Vdc
50Vdc
0.25ohm max.
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
DLW21SR670HQ2 is designed to correct line impedance when ESD protection device is also used.
ꢀꢀImpedance-Frequency Characteristics (Main Items)
DLW21SN_SQ2 Series
DLW21SN_HQ2 Series
1000
100
10
10000
Common mode
DLW21SN371SQ2
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
DLW21SN900SQ2
DLW21SN670SQ2
DLW21SN121HQ2
Common mode
DLW21SN900HQ2
DLW21SN670HQ2
1000
100
10
DLW21SN371SQ2
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121HQ2
DLW21SN900HQ2
1
1
DLW21SN121SQ2
DLW21SN900SQ2
DLW21SN670HQ2
Differential mode
10
DLW21SN670SQ2
Differential mode
1000
0.1
0.1
10
1
100
1000
100
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
169
DLW Series
Signal Lines Type Chip Common Mode Choke Coil
DLW21S
DLW21S Series (0805 Size)
ꢀꢀImpedance-Frequency Characteristics (Main Items)
DLW21SR_HQ2 Series
1000
Common mode
100
DLW21SR670HQ2
10
Differential mode
1
DLW21SR670HQ2
0.1
1
10
100
1000
Frequency (MHz)
ꢀꢀDifferential Mode Transmission Characteristics (Typ.)
DLW21SN_HQ2 Series
0
DLW21SN900HQ2
2
4
6
8
10
1
10
100
1000
10000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
170
DLW Series
Signal Lines Type Chip Common Mode Choke Coil
DLW21H
DLW21HSeries (0805 Size)
Low profile wire-wound common choke coil.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(2)
(3)
(1)
2.0±0.2
1.2±0.2
(4)
No polarity.
(0.45)
(1)
(0.45)
(2)
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
: Electrode
(in mm)
L
180mm Reel Embossed Tape
Bulk(Bag)
3000
500
(4)
(3)
B
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current Rated Voltage
Withstand Voltage DC Resistance
(at 100MHz/20°C)
DLW21HN670SQ2p
DLW21HN900SQ2p
DLW21HN121SQ2p
DLW21HN181SQ2p
67ohm±25%
90ohm±25%
120ohm±25%
180ohm±25%
330mA
330mA
280mA
250mA
50Vdc
50Vdc
50Vdc
50Vdc
10M ohm
10M ohm
10M ohm
10M ohm
125Vdc
125Vdc
125Vdc
125Vdc
0.35ohm max.
0.35ohm max.
0.45ohm max.
0.50ohm max.
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics (Main Items)
10000
DLW21HN181SQ2
Common mode
1000
DLW21HN121SQ2
DLW21HN900SQ2
100
DLW21HN670SQ2
10
DLW21HN181SQ2
DLW21HN121SQ2
1
DLW21HN900SQ2
Differential mode
DLW21HN670SQ2
0.1
1
10
100
1000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
171
DLW Series
Signal Lines Type Chip Common Mode Choke Coil
DLW31S
DLW31SSeries (1206 Size)
1206 size wire-wound common mode choke coil.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(2)
(3)
(1)
(4)
3.2±0.2
1.6±0.2
No polarity.
(1)
(2)
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
(4)
(3)
L
180mm Reel Embossed Tape
Bulk(Bag)
2000
500
: Electrode
(in mm)
B
(0.6)
(0.6)
Refer to pages from p.176 to p.179 for mounting information.
ꢀꢀRated Value (p: packaging code)
Insulation
Resistance
(min.)
Common Mode Impedance
Part Number
Rated Current Rated Voltage
Withstand Voltage DC Resistance
(at 100MHz/20°C)
DLW31SN900SQ2p
DLW31SN161SQ2p
DLW31SN261SQ2p
DLW31SN601SQ2p
DLW31SN102SQ2p
DLW31SN222SQ2p
90ohm±25%
160ohm±25%
260ohm±25%
600ohm±25%
1000ohm±25%
2200ohm±25%
370mA
340mA
310mA
260mA
230mA
200mA
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
10M ohm
125Vdc
125Vdc
125Vdc
125Vdc
125Vdc
125Vdc
0.3ohm max.
0.4ohm max.
0.5ohm max.
0.8ohm max.
1.0ohm max.
1.2ohm max.
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
HD: for high speed differential signal lines
UD: for ultra high speed differential signal lines
ꢀꢀImpedance-Frequency Characteristics
10000
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
Common mode
1000
100
DLW31SN161SQ2
DLW31SN900SQ2
10
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
1
DLW31SN900SQ2
Differential mode
0.1
1
10
100
1000
Frequency (MHz)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
172
PLT Series
Power Lines Type Large Current Common Mode Choke Coil for Automotive Available
PLT10H
PLT10HSeries (12.9x6.6 mm)
Automotive available, up to 10A.
ꢀꢀDimensions
ꢀꢀEquivalent Circuit
(1) (2)
(2)
(3)
(1)
102
(4) (3)
6.6±0.2
12.9±0.2
(4)
No polarity.
ꢀꢀPackaging
Minimum
Quantity
Code
Packaging
L
K
B
180mm Reel Embossed Tape
330mm Reel Embossed Tape
Bulk(Bag)
125
500
50
: Electrode
(in mm)
1.0±0.2
1.0±0.2
3.2±0.3
Refer to pages from p.180 to p.181 for mounting information.
ꢀꢀRated Value (p: packaging code)
Common Mode
Insulation
Resistance
(min.)
Rated
Current Voltage
Rated
Withstand
Voltage
Common Mode
DC Resistance
Part Number
Impedance
Inductance
(at 10MHz/20°C)
PLT10HH401100PNp
PLT10HH501100PNp
PLT10HH9016R0PNp
PLT10HH1026R0PNp
400ohm
500ohm
900ohm
1000ohm
10A
10A
6A
100Vdc 10M ohm
100Vdc 10M ohm
100Vdc 10M ohm
100Vdc 10M ohm
250Vdc
250Vdc
250Vdc
250Vdc
3.6m ohm±0.5m ohm
3.6m ohm±0.5m ohm
8.0m ohm±0.5m ohm
8.0m ohm±0.5m ohm
6µH min.
9µH min.
14µH min.
20µH min.
6A
Operating Temperature Range (Self-temperature rise is included): -55°C to +105°C (PLT10HH 1026R0/501100 PN), -55°C to +105°C (PLT10HH 401100/9016R0 PN) Number of Circuit: 1
ꢀꢀImpedance-Frequency Characteristics
10000
ꢀꢀNotice (Rating)
In operating temperature exceeding +65°C,
derating of current is necessary for
PLT10H Series.
PLT10HH1026R0PN
PLT10HH9016R0PN
Please apply the derating curve shown in
chart according to the operating
temperature.
1000
Derating
12
100
PLT10HH501100PN
PLT10HH401100PN
10
8
PLT10HH401
10
PLT10HH501
1
10
100
1000
Frequency (MHz)
PLT10HH901
6
4
2
PLT10HH102
0
0
20
40
60
80
100
120
140
Operating Temperature [°C]
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
173
Chip Common Mode Choke Coil
!Caution/Notice
!Caution
ꢀꢀRating
2. Mounting Direction
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.
Mount Chip Common Mode Choke Coils in right
direction. Wrong direction, which is 90 degrees rotated
from right direction, causes not only open or short
circuit but also flames or other serious trouble.
ꢀꢀSoldering and Mounting
1. Self-heating
Please provide special attention when mounting chip
common mode choke coils DLW5 series in close
proximity to other products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in
this component.
Z
Z
right direction
wrong direction
Notice
ꢀꢀStorage and Operating Conditions
ꢀꢀHandling
<Operating Environment>
1. Resin Coating (Except DLW Series.)
Using resin for coating/molding products may affect
the products performance.
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
<Storage and Handling Requirements>
1. Storage Period
So please pay careful attention in selecting resin.
Prior to use, please make the reliability evaluation with
the product mounted in your application set.
2. Resin Coating (DLW Series)
DLW11G/DLM2HG series should be used within 6
months, the other series should be used within 12
months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
The impedance value may change due to high cure-
stress of resin to be used for coating/molding products.
An open circuit issue may occur by mechanical stress
caused by the resin, amount/cured shape of resin, or
operating condition etc. Some resin contains some
impurities or chloride possible to generate chlorine by
hydrolysis under some operating condition may cause
corrosion of wire of coil, leading to open circuit.
So, please pay your careful attention in selecting resin
in case of coating/molding the products with the resin.
Prior to use the coating resin, please make sure no
reliability issue is observed by evaluating products
mounted on your board.
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
ꢀꢀNotice (Soldering and Mounting)
1. Cleaning
3. Caution for Use (DLW Series)
Failure and degradation of a product are caused by
the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
When you hold products with a tweezer, please hold
by the sides. Sharp materials, such as a pair of
tweezers, should not touch the winding portion to
prevent breaking the wire. Mechanical shock should
not be applied to the products mounted on the board
to prevent breaking the core.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
4. Brushing
When you clean the neighborhood of products such
as connector pins, bristles of cleaning brush shall not
be touched to the winding portion of this product to
prevent the breaking of wire.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a commercial-
purpose equipment design.
5. Handling of a Substrate
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate. Excessive
mechanical stress may cause cracking in the Product.
Bending
Twisting
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
174
Chip Common Mode Choke Coil
!Caution/Notice
!Caution
ꢀꢀRating
2. Mounting Direction
1. Do not use products beyond the rated current and
rated voltage as this may create excessive heat and
deteriorate the insulation resistance.
2. Be sure to provide an appropriate fail-safe function on
your product to prevent a second damage that may be
caused by the abnormal function or the failure our
product.
Mount Chip Common Mode Choke Coils in right
direction. Wrong direction, which is 90 degrees
rotated from right direction, causes not only open or
short circuit but also flames or other serious trouble.
Z
Z
ꢀꢀSoldering and Mounting
1. Self-heating
Please provide special attention when mounting chip
common mode choke coils in close proximity to other
products that radiate heat.
right direction
wrong direction
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in
this component.
Notice
ꢀꢀStorage and Operating Conditions
<Operating Environment>
ꢀꢀNotice (Soldering and Mounting)
1. Cleaning
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
Failure and degradation of a product are caused by
the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
<Storage and Handling Requirements>
1. Storage Period
PLT10H series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
3. Other
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a commercial-
purpose equipment design.
ꢀꢀHandling
1. Handling of a Substrate
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate.
Excessive mechanical stress may cause cracking in
the Product.
Bending
Twisting
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
175
Soldering and Mounting
DLp Chip Common Mode Choke Coil
1. Standard Land Pattern Dimensions
Land Pattern
+ Solder Resist
Land Pattern
Solder Resist
(in mm)
DLM11G
DLM2HG
DLP0NS
DLP11S
DLP11T
DLP1ND
DLP2AD
DLP31S
DLP31D
DLW21S
DLW21H
DLW31SN
DLW5AH
DLW5B
oReflow and Flow
DLM2HG
DLP31D
DLP31S
2.8
1.0
4.0
1.0 0.6 1.0
0.8 Pitch
0.4
oReflow Soldering
DLP0NS
DLP11S
DLP11T
DLP1ND
1.4
0.2
0.30
0.55
1.95
0.55
1.55
0.90
0.4
DLP2AD
DLM11G
DLW21S/21H/31SN
1.75
0.25
3
0.5
1.5
a
b
0.5
Series
DLW21S/H
DLW31SN
a
b
c
d
DLW5AH/5B
0.8
1.6
2.6
3.7
0.4
0.4
1.2
1.6
1
: If the pattern is made with wider than 1.2mm (DLW21) /
1.6mm (DLW31S) it may result in components turning
around, because melting speed is different. In the worst
case, short circuit between lines may occur.
2
: If the pattern is made with less than 0.4mm, in the worst
case, short circuit between lines may occur due to spread
of soldering paste or mount placing accuracy.
0.9
3: If the pattern is made with wider than 0.8mm (DLW21) /
1.6mm (DLW31SN), the bending strength will be reduced.
Do not use gild pattern; excess soldering heat may dissolve
metal of a copper wire.
2.9
5.5
o PCB Warping
Products should be located in the sideways direction
(Length: a<b) to the mechanical stress.
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.
a
b
Poor example
Good example
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
176
DLp Chip Common Mode Choke Coil Soldering and Mounting
2. Solder Paste Printing and Adhesive Application
When flow soldering the chip common mode choke coils,
apply the adhesive in accordance with the following
conditions.
When reflow soldering the chip common mode choke
coils, the printing must be conducted in accordance with
the following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
Standard land dimensions should be used for resist and
copper foil patterns.
become detached during flow soldering process.
(in mm)
Series
Solder Paste Printing
Adhesive Application
oGuideline of solder paste thickness:
100-150µm: DLW21S/21H/31S,
DLP0NS/11S/11T/1ND/2AD/DLM11G
150-200µm: DLP31D/31S, DLM2HG,
DLW5AH/5BS/5BT
DLP31S/DLM2HG/DLP31D
Apply 0.3mg of bonding agent at each chip.
DLP
DLW
DLM
DLP31D
DLP31S
*Solderability is subject to reflow conditions and
thermal conductivity. Please make sure that your
product has been evaluated in view of your
specifications with our product being mounted to your
product.
Coating Position of
Bonding Agent
DLP0NS/11S/11T/31S/DLM11G DLW21S/21H/31S
Coating Position of
Bonding Agent
DLM2HG
a
b
a
b
a
Coating Position of
Bonding Agent
Series
a
b
c
d
Series
a
b
c
d
DLP0NS 0.3 0.3 0.3 0.5
DLP11S 0.7 0.55 0.3 0.55
DLP11T 0.5 0.55 0.3 0.55
DLP31S 1.0 0.6 0.7 2.1
DLM11G 0.5 0.5 0.4 0.7
DLW21S/H 0.8 2.6 0.5 1.2
DLW31S
1.6 3.7 0.4 1.6
DLP2AD/31D
c
Series
a
b
c
d
DLP1ND 0.3 0.3 0.2 0.4
DLP2AD 0.55 0.4 0.25 0.5
DLP31D 1.0 0.8 0.4 0.8
d
DLW5AH/5BS/5BT
DLM2HG
5.5
2.9
0.9
1.0
4.0
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
177
DLp Chip Common Mode Choke Coil Soldering and Mounting
3. Standard Soldering Conditions
(1) Soldering Methods
Flux:
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
common mode choke coils.
o Use Rosin-based flux.
In case of DLW21/31 series, use Rosin-based flux with
converting chlorine content of 0.06 to 0.1wt%.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using DLP/DLM series with Sn-Zn based solder,
please contact Murata in advance.
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
(2) Soldering Profile
oFlow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
T3
T2
t2
Limit Profile
Heating
T1
Standard Profile
Pre-heating
t1
Time (s)
Standard Profile
Heating
Limit Profile
Heating
Pre-heating
Series
Cycle
Cycle
of Flow
of Flow
Temp. (T1)
Time. (t1)
Temp. (T2) Time. (t2)
Temp. (T3)
Time. (t2)
DLM2HG
DLP31D/31S
2 times
max.
2 times
max.
150°C
60s min.
250°C
4 to 6s
265±3°C
5s max.
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
T4
T3
T2
T1
180
150
Limit Profile
t1
t2
Pre-heating
Standard Profile
90s±30s
time (s)
Standard Profile
Peak
Limit Profile
Peak
Temperature
(T4)
Series
Heating
Heating
Temp. (T3) Time. (t2)
Cycle
of Reflow
Cycle
of Reflow
Temperature
(T2)
Temp. (T1)
Time. (t1)
2 times
max.
2 times
max.
DLM/DLP
DLW21/31
220°C min. 30 to 60s
220°C min. 30 to 60s
245±3°C
230°C min. 60s max. 260°C/10s
230°C min. 60s max. 260°C/10s
2 times
max.
2 times
max.
DLW5A/5B
250±3°C
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
178
DLp Chip Common Mode Choke Coil Soldering and Mounting
(3) Reworking with Solder Iron
The following conditions must be strictly followed when
using a soldering iron.
Do not allow the tip of the soldering iron to directly
contact the chip.
Pre-heating: 150°C 60s min.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
Soldering iron power output / Tip diameter:
30W max. / ø3mm max.
Temperature of soldering iron tip / Soldering time / Times:
350°C max. / 3-4s / 2 times*1
*1 DLP0NS, DLP11S, DLP11T, DLP1ND, DLP2AD:
380°C max. / 3-4s / 2 times
4. Cleaning
Following conditions should be observed when cleaning
chip EMI filter.
Before cleaning, please contact Murata engineering.
(a) Alcohol cleaning agent
(1) Cleaning Temperature: 60°C max. (40°C max. for
alcohol type cleaner)
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
(2) Ultrasonic
Pine Alpha ST-100S
Output: 20W/liter max.
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agent has been removed with deionized water.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning agent
The following list of cleaning agents have been tested on
the individual components. Evaluation of final assembly
should be completed prior to production.
Do not clean DLW (except DLW21H) series.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
179
Soldering and Mounting
PL p Chip Common Mode Choke Coil
1. Standard Land Pattern Dimensions
(in mm)
Copper Foil Pattern
PLT10H
oReflow Soldering
Copper Foil Pattern + Resist
Resist
PLT10H
4.0
8.0
4.0
o PCB Warping
Products should be located in the sideways direction
(Length: a<b) to the mechanical stress.
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.
a
b
Poor example
Good example
2. Solder Paste Printing and Adhesive Application
When flow soldering the chip common mode choke coils,
apply the adhesive in accordance with the following
conditions.
When reflow soldering the chip common mode choke
coils, the printing must be conducted in accordance with
the following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.
Standard land dimensions should be used for resist and
copper foil patterns.
Series
Solder Paste Printing
oGuideline of solder paste thickness:
150-200µm: PLT10H
PLT10H
For the solder paste printing pattern, use standard land dimensions.
*Solderability is subject to reflow conditions and thermal conductivity. Please make sure that your
product has been evaluated in view of your specifications with our product being mounted to your
product.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
180
PLp Chip Common Mode Choke Coil Soldering and Mounting
3. Standard Soldering Conditions
(1) Soldering Methods
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
Flux:
Use reflow soldering methods only.
Use standard soldering conditions when soldering chip
common mode choke coils.
o Use Rosin-based flux.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
use Rosin-based flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
(2) Soldering Profile
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
T4
T3
T2
T1
180
150
Limit Profile
t1
t2
Pre-heating
Standard Profile
90s±30s
time (s)
Standard Profile
Limit Profile
Peak
Peak
Temperature
(T2)
Series
Heating
Temp. (T1) Time. (t1)
Heating
Cycle
of Reflow
Cycle
of Reflow
Temperature
(T4)
Time. (t2)
Temp. (T3)
2 times
max.
2 times
max.
PLT10H
220°C min. 30 to 60s
250±3°C
230°C min. 60s max. 260°C/10s
(3) Reworking with Solder Iron
Do not allow the tip of the soldering iron to directly
contact the chip.
The following conditions must be strictly followed when
using a soldering iron.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
Pre-heating: 150°C 60s min.
Soldering iron power output / Tip diameter:
80W max. / ø3mm max.
Temperature of soldering iron tip / Soldering time / Times:
400°C max. / 5s / 2 times
4. Cleaning
Do not clean after soldering. If cleaning, please contact us.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
181
Packaging
DLp Chip Common Mode Choke Coil
Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
<Embossed>
<Paper>
2.0±0.05
c
1 4.0±0.1 4.0±0.1 ø1.5+0.1
-
0
d
c
Direction of Feed
DLM11G: 2.0±0.05
b
c: Depth of Cavity
(Embossed Tape)
c: Total Thickness of Tape
(Paper Tape)
1
Dimension of the cavity of embossed tape is measured at the bottom side.
Minimum Qty. (pcs.)
ø330mm Reel
Paper Tape Embossed Tape Paper Tape Embossed Tape
Cavity Size
Part Number
ø180mm Reel
Bulk
a
b
c
0.8 max.
1.3
d
DLM11G
DLM2HG
DLP0NS
DLP11S
DLP11T
DLP1ND
DLP2AD
1.45 1.2
2.75 2.25
0.95 0.75
-
10000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1000
1000
500
500
500
500
500
500
500
500
500
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.3
-
-
-
-
-
-
-
-
-
-
3000
5000
3000
5000
5000
3000
3000
2000
3000
2000
0.55
0.98
0.45
0.57
0.98
1.3
1.4
1.2
1.35 1.1
1.7 0.84
2.2
3.5
1.2
1.9
DLP31D/31S
DLW21S
2.25 1.45
2.3 1.55
1.4
DLW21H
1.1
0.25
0.3
DLW31S
3.6
2.0
2.1
(in mm)
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
c
2.0±0.05
ø1.5+0.1
0.4
8.0±0.1
4.0±0.1
-
0
Cavity Size
Minimum Qty. (pcs.)
ø180mm Reel ø330mm Reel Bulk
Part Number
a
b
c
DLW5AH
DLW5BS
DLW5BT
5.4
5.5
5.5
4.1
5.4
5.4
4.4
4.7
2.7
400
400
700
1500
1500
2500
100
100
100
b
Direction of feed
c: Depth of Cavity
Dimension of the cavity is measured at the bottom side.
(in mm)
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity".
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
C31E.pdf
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Mar.28,2011
182
Packaging
PL p Chip Common Mode Choke Coil
Minimum Quantity and Dimensions of 24mm Width Embossed Tape
4.0±0.1
+0.1
–0
2.0±0.1
ø1.5
d
b
12.0±0.1
c
Direction of Feed
(in mm)
Dimension of the cavity is measured at the bottom side.
Cavity Size (mm)
Minimum Qty. (pcs.)
ø330mm Reel
500
Part Number
PLT10H
a
b
c
d
ø178mm Reel
Bulk
50
13.5
6.5
9.4
0.5
125
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
183
DLp Chip Common Mode Choke Coil
Design Kits
oEKEMDL21L (Chip Common Mode Choke Coils)
Quantity
(pcs.)
Common Mode Impedance
(at 100MHz, 20 degrees C)
Rated Voltage
(Vdc)
Rated Current
(mA)
No.
Part Number
1
DLW21HN670SQ2
DLW21HN900SQ2
DLW21HN121SQ2
DLW21HN181SQ2
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SR670HQ2
DLP0NSA150HL2
DLP0NSC280HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
DLP1NDN350HL4
DLP1NDN670HL4
DLP1NDN900HL4
DLP11SA350HL2
DLP11SA670HL2
DLP11SA900HL2
DLP11SN670SL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SN900HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11TB800UL2
DLP2ADA350HL4
DLP2ADA670HL4
DLP2ADA900HL4
DLP2ADN670HL4
DLP2ADN900HL4
DLP2ADN121HL4
DLP2ADN161HL4
DLP2ADN201HL4
DLP2ADN241HL4
DLP2ADN281HL4
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
67Ω±25%
90Ω±25%
120Ω±25%
180Ω±25%
67Ω±25%
90Ω±25%
120Ω±25%
180Ω±25%
260Ω±25%
370Ω±25%
67Ω±25%
90Ω±25%
120Ω±25%
67Ω±25%
15Ω±5Ω
50
50
50
50
50
50
50
50
50
50
20
20
20
20
5
330
330
280
250
400
330
370
330
300
280
320
280
280
400
100
100
110
100
90
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
28Ω±20%
67Ω±20%
90Ω±20%
120Ω±20%
35Ω±20%
67Ω±20%
90Ω±20%
35Ω±20%
67Ω±20%
90Ω±20%
67Ω±20%
120Ω±20%
160Ω±20%
90Ω±20%
200Ω±20%
240Ω±20%
280Ω±20%
330Ω±20%
80Ω±25%
35Ω±20%
67Ω±20%
90Ω±20%
67Ω±20%
90Ω±20%
120Ω±20%
160Ω±20%
200Ω±20%
240Ω±20%
280Ω±20%
5
5
5
5
5
100
80
5
5
60
5
170
150
150
180
140
120
150
110
100
90
5
5
5
5
5
5
5
5
5
5
80
5
100
150
130
120
140
130
120
100
90
5
5
5
5
5
5
5
5
5
80
5
80
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
184
DLp Chip Common Mode Choke Coil Design Kits
oEKEMDCC5C (Chip Common Mode Choke Coils for DC Power Line / SMD Block type EMIFILr for Power Line)
Quantity
(pcs.)
Common Mode Impedance
(at 100MHz, 20 degrees C)
Rated Voltage
(Vdc)
Rated Current
(mA)
No.
Part Number
1
2
DLW5AHN402SQ2
DLW5BSN191SQ2
DLW5BSN351SQ2
DLW5BSN102SQ2
DLW5BSN152SQ2
DLW5BSN302SQ2
DLW5BTN101SQ2
DLW5BTN251SQ2
DLW5BTN501SQ2
DLW5BTN102SQ2
DLW5BTN142SQ2
5
5
5
5
5
5
5
5
5
5
5
4000Ω (Typ.)
190Ω (Typ.)
350Ω (Typ.)
1000Ω (Typ.)
1500Ω (Typ.)
3000Ω (Typ.)
100Ω (Typ.)
250Ω (Typ.)
500Ω (Typ.)
1000Ω (Typ.)
1400Ω (Typ.)
50
50
50
50
50
50
50
50
50
50
50
200
5000
2000
1500
1000
500
3
4
5
6
7
6000
5000
4000
2000
1500
8
9
10
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
185
PL p Large Current Common Mode Choke Coils (Automotive Available)
Design Kits
oEKEPPL10B (Common Mode Choke Coil)
Quantity
(pcs.)
Common Mode Impedance
(at 10MHz, 20 degrees C)
Rated Voltage
(Vdc)
Rated Current
(A)
No.
Part Number
1
2
3
4
PLT10HH401100PN
PLT10HH501100PN
PLT10HH9016R0PN
PLT10HH1026R0PN
6
6
6
6
400Ω (Typ.)
500Ω (Typ.)
900Ω (Typ.)
1000Ω (Typ.)
100
100
100
100
10
10
6
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C31E.pdf
Mar.28,2011
186
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Murata:
DLW5AHN402SQ2L DLW5BSN152SQ2L DLW5BSN191SQ2L DLW5BSN102SQ2L DLW5BSN302SQ2L
DLW21SN261SQ2L DLW5BSN351SQ2L DLP31SN221SL2B DLP31SN221SL2L DLP31SN121SL2L
DLP31DN441ML4L DLP31DN471SL4L DLW21HN670SQ2L DLW21SN670SQ2L DLW21SN181SQ2L
DLP11SN161SL2L DLW21HN181SQ2L DLP11SN201SL2L DLW31SN601SQ2L DLP31DN900SL4L
DLW21HN121SQ2L DLP31SN551SL2L DLW21SN261SQ2B DLW5BTN102SQ2L DLW5BTN142SQ2L
DLW5BTN251SQ2L DLW5BTN501SQ2L DLW5BSN102SQ2B DLP31SN221ML2B DLM2HGN601SZ3L
DLP11SN900SL2L DLW31SN900SQ2L DLP31DN900ML4L DLP0NSN900HL2L DLP2ADN121HL4L
DLP31SN221ML2L DLW31SN102SQ2L DLP31DN900SL4 DLW31SN222SQ2L DLW31SH222SQ2L
DLP31DN201ML4L DLW21SN121SQ2L DLW21SN371SQ2L DLP31DN131ML4L DLP31DN201SL4L
DLW21HN900SQ2L DLP11SN121SL2L DLP31DN321ML4L DLW21SN900SQ2L DLW31SN261SQ2L
DLW31SN161SQ2L DLP31DN161SL4L DLP31DN361SL4L DLP0NSN121HL2L DLP0NSN670HL2L
DLP11SA350HL2L DLP11SA670HL2L DLP11SA900HL2L DLP11SN241HL2L DLP11SN281HL2L
DLP11SN331HL2L DLP11SN900HL2L DLP2ADN161HL4L DLP2ADN201HL4L DLP2ADN241HL4L
DLP2ADN281HL4L DLP2ADN670HL4L DLP2ADN900HL4L DLW21SN121HQ2L DLW21SN670HQ2L
DLW21SR670HQ2L DLW43SH101XK2L DLW43SH510XK2B DLP11TB800UL2L DLW5BTN501SQ2K
DLW21SN900HQ2L DLW5BTN101SQ2L DLP31SN121ML2L DLP31SN551ML2L DLP11SN201HL2L
DLP11SN670SL2L DLP31DN441ML4B DLM11GN601SZ2D DLM11GN601SD2D DLW43SH101XP2L
DLW43SH110XK2L DLW43SH220XK2L
相关型号:
©2020 ICPDF网 联系我们和版权申明