EHS20-015-PHCRC [MURATA]
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, PACKAGE-8;型号: | EHS20-015-PHCRC |
厂家: | muRata |
描述: | DC-DC Regulated Power Supply Module, 1 Output, Hybrid, PACKAGE-8 |
文件: | 总6页 (文件大小:255K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
E Class Converters
EHS20 – 1.5V Model
OBSOLETE PRODUCT
Model
1.5V
Units
Parameter
Output Voltage Setpoint
Line/Load Regulation
Output total regulation
Output adjust (note 4)
1.48 – 1.52
0.1% / 0.2%
1.45 – 1.55
90-110
Vdc
% Vo
Max
Vdc
%Vo,nom
Remote-sense Comp.
10%
100
V
Output Ripple & Noise (note 2)
Max
Typ
mVp-p
Output Current
0-20
86%
A
%
Efficiency (48V, Full load, 25C)
External Capacitance
1,000 – 10,000
μF
150
400
Transient Response (typ) (note 3)
mV
ΔVo
Ts
25% step, 1A/μs
μs
Over-voltage trip point (latching)
1.80 – 2.03
25
V
A
Over-current trip point (non-latching)
Typ
All specifications, waveforms, charts at Ta=25C, Vin=48V, unless otherwise specified
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
1
EHS20-6200981505_D01_28/04/08
E Class Converters
Murata Power Solutions
EHS20 – 1.5V Model
Parameter
Conditions
Min. Typ. Max.
Units
Input
Input Voltage (Vin)
Reflected Ripple Current
Inrush Transient
36
48
25
75
Vdc
‘mA p-p
A2s
See note (1)
0.2
100mS 10% duty
cycle
Input Voltage Transient
Undervoltage Lockout
100
V
Turn-on
(non-latching)Turn-off
(non-latching)Turn-off
32
31
77
35
34
81
Vdc
Vdc
Vdc
Over-voltage lockout
Isolation
Input-Output
Resistance; input-output
1500
10
Vdc
Mohm
Temperature
Operating Ambient
Storage
-40
-40
90
°C
°C
125
Protection
Over-Temperature
(non-latching)Measured on PCB
125
°C
Physical Information Dimensions
MTBF
2.30”L x 0.82” W x 0.36”H (58.4 x 20.8 x 9.3 mm)
1,000,000 Hrs EHS15/20 Series
Demonstrated at 40C ambient with 90% confidence: 2,800,000 Hrs
Calculated at 40C ambient, (Bellcore)
Complies with IEC/EN/CSA/UL 60950, provides basic insulation, input to output.
c-UL-us (US and Canada) recognized, TUV certified (Bauart).
Safety
Pin Assignments
Pin #
Description
Vin (+)
Pin #
Description
Vout(-)
Sense -
Vo adj
Pin #
7
8
Description
Sense +
Vo (+)
1
2
3
4
5
6
Enable
Vin(-)
www.murata-ps.com/support
2
EHS20-6200981505_D01_28/04/08
E Class Converters
Murata Power Solutions
EHS20 – 1.5V Model
EHS20-015 TEMPERATURE DERATING
Airflow from Vin(-) to Vin(+), Tj=120C
EHS20-015 TEMPERATURE DERATING
Airflow from Input to Output, Tj=120C
25
20
15
10
5
25
20
15
10
5
100 LFM
300 LFM
200 LFM
400 LFM
100 LFM
300 LFM
200 LFM
400 LFM
20
30
40
50
60
70
80
90
20
40
50
70
80
90
30EHS20-015 Enable w6it0h Pre-Bias
Ambient temp (deg c)
14Nov03
Ambient temp (deg c)
14Nov03
EHS20-015 Efficiency
90.0
85.0
80.0
75.0
70.0
65.0
36V
48V
75V
Output Voltage @ 0.5 V/div., 2 ms/div.
Prebias voltage =0.9 Vdc. Input Voltage 48 V
Load current = 0, Load capacitance = 2,200 uF.
4
6
8
10
12
14
16
18
20
Iout [Adc]
EHS20-015 Trim-up and Trim-down Resistance
Trim Up/Down Formula : 1.5V model
1000
5.10 Vnom (100
1.225 %
%) 510
%
Rup (1.5 V)
Rdown
Rup
10.2
K
100
10
1
Where
(Vout Vnom) 100
Vnom
and, Vout = Target output voltage
%
Where
510
%
(Vnom Vout) 100
%
Rdown( %)
10.2 K
Vnom
0%
2%
4%
6%
8%
10%
Delta (%)
www.murata-ps.com/support
3
EHS20-6200981505_D01_28/04/08
E Class Converters
Murata Power Solutions
EHS20 – 1.5V Model
EHS20-015 Startup Sequence from Enable
EHS20-015 Startup Sequence from Vin
Top Trace: Vout @ 0.5 V/div.
Bot. Trace: Vin @ 20V/div. (48Vdc)
Horiz. @ 50 ms/div.
Top Trace: Vout @ 0.5 V/div.
Bot. Trace: Venable @ 2 V/div.
Horiz. @ 5 ms/div. Vin= 36Vdc
Load: 20 A,
Turn-on delay: 110mS
Load: 20 A., 10,000 uF,
Turn-on delay: 4.8 ms
EHS20-015 Transient Response, 50-25% step, 1A/us
EHS20-015 Transient Response, 50-75% step, 1A/μs
CH1: Vout AC coupled
CH1: Vout AC coupled
CH2 : Step up Current (2A/div)
CH2 : Step down Current (2A/div)
EHS20-015 Input Reflected Ripple Current, Iout = 20 A
EHS20-015 Output Ripple Voltage, Iout = 20A
Input Current @ 5.0 mA/div., 20 us/div. (14 mApp)
Input Voltage: 48 V, Load Current: 20A
Note: refer to test circuit schematic
www.murata-ps.com/support
4
EHS20-6200981505_D01_28/04/08
E Class Converters
Murata Power Solutions
EHS20 – 1.5V Model
Notes:
1.
Input Reflected Ripple is specified when measured with the filter shown below
is
ic
L2
Vin
12uF
DC-DC
Converter
220uF,
ESR<0.1 Ohm s
33uF,
ESR<0.7 Ohm s
100kHz
@
100kHz
@
RTN
2.
Output Ripple and noise is specified when measured with a 10uF tantalum and a 1uF ceramic
capacitor at the converter output pins
3.
4.
Transient response is specified with a 470uF tantalum capacitor at the output of the converter
Trim resistor connection: Rtrim-up connected from Vo adj to Vo(+), Rtrim –down connected from
Vo adj to Vo(-).
EHS20-015 Enable Pin Connection Table
ENABLE POWER SUPPLY
0V < Venable < 0.8V
(internal pull-up > 50Kohms @
5V)
2.5V < Venable < 15V
(external pull-up > 1Kohms)
DISABLE POWER SUPPLY
2.5V < Venable < 15V
(external pull-up > 1Kohms)
NEGATIVE LOGIC VERSION
POSITIVE LOGIC VERSION
0V < Venable < 0.8V
(internal pull-up > 50Kohms @
5V)
Note:
Power Supply has internal pull-up resistor. Enable pin is in a valid “high” state if left open-circuit.
Safety considerations
The EHS series of converters are certified to IEC/EN/CSA/UL 60950. If this product is built into information technology
equipment, the installation must comply with the above standard.
An external input fuse (5A to 30A recommended), must be used to meet the above requirements.
The output of the converter [Vo(+)/Vo(-)] is considered to remain within SELV limits when the input to the converter
meets SELV or TNV-2 requirements.
The converters and materials meet UL 94V-0 flammability ratings.
www.murata-ps.com/support
5
EHS20-6200981505_D01_28/04/08
E Class Converters
Murata Power Solutions
EHS20 – 1.5V Model
Part Number Designations
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2012 Murata Power Solutions, Inc.
www.murata-ps.com/support
6
EHS20-6200981505_D01_28/04/08
相关型号:
©2020 ICPDF网 联系我们和版权申明