GCG155R71H122KA01 [MURATA]
Explanation of Symbols in This Catalog AEC-Q200 compliant product; 符号在此目录AEC -Q200标准的产品说明
| 型号： | GCG155R71H122KA01 |
| 厂家： | 
muRata |
| 描述： | Explanation of Symbols in This Catalog AEC-Q200 compliant product |
| 文件： | 总67页 (文件大小：2535K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
C03E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May.17,2013
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Explanation of Symbols in This Catalog
Lx W dimension: products of 0.6x0.3 mm or less
Ultra-
compact
AEC- AEC-Q200 compliant product
Q200
Anti-
noise
Product suitable for acoustic noise reduction and low distortion
This product suppresses acoustic noise,
which occurs when a ceramic capacitor is used,
by devising the materials and configuration.
Fail
safe
Fail safe product
This capacitor is designed to prevent failures
as much as possible by short mode.
Product resistant to deflection cracking
This capacitor is designed to prevent failures as much
Deflecting
crack
as possible by short mode caused by cracking
when there is board deflection.
Product with solder cracking suppression
This capacitor is configured with metal terminals or lead
Soldering
crack
wires connected to the chip.
The metal terminals or lead wires relieve the stress from
expansion and contraction of the solder, to suppress solder
cracking.
Also, including capacitor which can be mounted with a
conductive adhesive, instead of soldering.
s
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
s
EU RoHS
Compliant
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
s
(http://www.murata.com/info/rohs.html).
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Contents
Part Numbering
p2
p4
p5
Selection Guide
Capacitance Table
Chip Monolithic Ceramic Capacitors
for Automotive
Cap. Table
General Purpose Product
GCM Series
p16
p6
Product specifications are as of March 2013.
Resin External Electrode Product
GCJ Series
p23
p10
Specially Designed Product
to Reduce Shorts GCD Series
p28
p12
Specially Designed Product to Reduce
Shorts & Resin Electrode Product
GCE Series
p30
p32
p12
p13
Conductivity Adhesive Compatible Type
GCG Series
High Effective Capacitance
& High Allowable Ripple Current
GC3 Series
p36
p38
p14
p14
Metal Terminal Type KCM Series
Metal Terminal Type/High Effective
Capacitance & High Allowable Ripple
Current KC3 Series
p41
p14
!Caution/Notice
p44
p62
p63
Introduction of Website SimSurfing
EMICON-FUN!
Product Information p64
Please check the MURATA home page (http://www.murata.com/)
if you cannot find the part number in the catalog.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
o Part Numbering
Chip Monolithic Ceramic Capacitors for Automotive
(Part Number)
GC
M
18
8
R7 1H 102
K
A37
D
q
w
e
r
t
y
u
i
o
!
qProduct ID
wSeries
rHeight Dimension (T) (Except KCp)
Code
3
Dimension (T)
Product ID
Code
Series
0.3mm
5
0.5mm
High effective capacitance &
High allowable ripple current
3
D
E
6
0.6mm
Specially designed product to reduce shorts
8
0.8mm
9
0.85mm
Specially designed product to reduce shorts &
resin electrode product
GC
A
B
C
D
E
1.0mm
G
J
Conductivity adhesive compatible type
Resin external electrode product
For automotive
1.25mm
1.6mm
M
2.0mm
2.5mm
Metal terminal type/High effective capacitance &
High allowable ripple current
3
KC
M
N
Q
R
X
1.15mm
M
Metal terminal type
1.35mm
1.5mm
eChip Dimension (LgW)
1.8mm
Depends on individual standards.
Code
03
Dimension (LgW)
EIA
0.6g0.3mm
1.0g0.5mm
1.6g0.8mm
2.0g1.25mm
3.2g1.6mm
3.2g2.5mm
4.5g3.2mm
5.7g5.0mm
0201
0402
0603
0805
1206
1210
1812
2220
rHeight Dimension (T) (KCp Only)
15
18
Code
Dimension (T)
21
L
Q
T
2.8mm
3.7mm
4.8mm
6.4mm
31
32
43
W
55
tTemperature Characteristics
Temperature
Characteristic Codes
Temperature Characteristics
Capacitance Change Each Temperature (%)
Operating
Temperature
Range
Capacitance Change
or Temperature
Coefficient
–55°C
–25°C
–10°C
Public
Reference Temperature
Code
STD Code Temperature
Range
Max. Min. Max. Min. Max. Min.
20 to 150°C
20 to 125°C
20 to 125°C
20 to 125°C
20 to 125°C
25 to 125°C
25 to 150°C
0.82 –0.45 0.49 –0.27 0.33
0.54 –0.23 0.33 –0.14 0.22
0.82 –0.45 0.49 –0.27 0.33
–0.18
0C
1C
2C
3C
4C
5C
5G
7U
C7
D7
L8
R1
R7
R9
20°C
20°C
20°C
20°C
20°C
25°C
25°C
25°C
25°C
25°C
25°C
20°C
25°C
25°C
0 60ppm/°C
0 30ppm/°C
0 60ppm/°C
0 120ppm/°C
0 250ppm/°C
0 30ppm/°C
0 30ppm/°C
–55 to 150°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 150°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 150°C
–55 to 125°C
–55 to 125°C
–55 to 150°C
CHA
CG
*2
–0.09
JIS
JIS
JIS
JIS
EIA
*2
–0.18
CH
1.37
–0.9
0.82 –0.54 0.55
–0.36
CJ
2.56 –1.88 1.54 –1.13 1.02
–0.75
CK
0.58 –0.24
0.58 –0.24
0.4
–0.17 0.25
–0.17 0.25
–0.11
C0G
X8G
U2J
X7S
X7T
X8L
R *1
X7R
X8R
0.4
–0.11
25 to 125°C *3 –750 120ppm/°C
8.78
5.04
6.04
3.47
3.84
2.21
EIA
EIA
EIA
*2
22ꢀ
+22ꢀ, –33ꢀ
+15ꢀ, –40ꢀ
15ꢀ
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
–55 to 125°C
–55 to 125°C
–55 to 150°C
–55 to 125°C
–55 to 125°C
–55 to 150°C
JIS
EIA
EIA
15ꢀ
15ꢀ
*1 Capacitance change is specified with 50ꢀ rated voltage applied.
*2 Murata Temperature Characteristic Code.
*3 Rated Voltage 100Vdc max: 25 to 85°C
Continued on the following page.
Please check the MURATA home page (http://www.murata.com/) if you cannot find a part number in this catalog.
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Continued from the preceding page.
iCapacitance Tolerance
yRated Voltage
Code
0J
Rated Voltage
DC6.3V
DC10V
Code
B
Capacitance Tolerance
0.1pF
1A
1C
1E
C
0.25pF
DC16V
D
0.5pF
DC25V
F
1ꢀ
YA
1H
1J
DC35V
G
2ꢀ
DC50V
J
5ꢀ
DC63V
K
10ꢀ
2A
2E
DC100V
DC250V
DC450V
DC630V
DC1kV
M
R
20ꢀ
Depends on individual standards.
0.05pF
2W
2J
W
oIndividual Specification Code
3A
Expressed by three figures.
uCapacitance
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
numbers.
If there is a decimal point, it is expressed by the capital letter "R."
In this case, all figures are significant digits.
!Package
Code
Package
L
D/W
K
ø180mm Embossed Taping
ø180mm Paper Taping
ø330mm Embossed Taping
ø330mm Paper Taping
Bulk
If any letter, other than "R" is included, this indicates the specific
part number is a non-standard part.
J
Ex.)
Code
R50
1R0
100
Capacitance
0.50pF
B
C
Bulk Case
1.0pF
10pF
103
10000pF
Please check the MURATA home page (http://www.murata.com/) if you cannot find a part number in this catalog.
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Selection Guide for Chip Monolithic Ceramic Capacitors
page
GCM
GCJ
GCD
GCE
GCG
GC3
KCM
KC3
GRM
GNM
LLL
p16
p23
p28
p30
p32
p36
p38
p41
LLR
LLA
LLM
GJM
GQM
GMA
GMD
GWM
GRJ
GR3
GR4
GR7
GJ4
GJ8
ZRA
KRM
KR3
GA2
GA3
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Capacitance Table
How to read the Capacitance Table
0.6× 1.0×
L×W (mm)
1.6×0.8
0.9
0.± 0.5
T max. (mm) 0.±± 0.55
The values can be narrowed down in the order of size,
rated voltage, and temperature characteristics.
Rated Voltage (Vdc) 25 50 100 50 10
Cap. / TC Code C0G C0G C0G C0G C0
p17 p17 p17 p17
p17 p17 p17 p17
p17 p17 p17 p17
p17 p17 p17 p17
p17 p17 p17 p17
1.0pF
2.0pF
±.0pF
4.0pF
5.0pF
Refers to the page of the part number list.
Check the part number list for the applicable product number.
Temperature Characteristics Table
The Table is colored by temperature characteristic codes.
Refer to the following Table for the meaning of each code.
C0G U2J X7R X7S X7T
X8G X8L
EIA:
Murata Temperature Characteristic:
Temperature
Temperature Characteristics
Characteristic Codes
Capacitance Change Each Temperature (%)
–55°C –25°C –10°C
Operating
Temperature
Range
Capacitance Change
or Temperature
Coefficient
Public
STD Code
Reference
Temperature
Temperature
Range
Max.
Min.
Max.
Min.
Max.
Min.
X8G: Murata Temperature Characteristic
25°C
25°C
25°C
25°C
25°C
25°C
25°C
25 to 150°C
25 to 125°C
25 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 150°C
0±±0ppmꢀ°C
0±±0ppmꢀ°C
–750±120ppmꢀ°C
±15ꢁ
–55 to 150°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 150°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
C0G
U2J
X7R
X7S
X7T
EIA
EIA
EIA
EIA
EIA
0.58
–0.24
0.4
–0.17
0.25
–0.11
8.78
5.04
6.04
±.47
±.84
2.21
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
±22ꢁ
+22ꢁ, –±±ꢁ
+15ꢁ, –40ꢁ
X8L: Murata Temperature Characteristic
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GCM Series Temperature Compensating Type
p00 ←
C0G U2J
EIA:
Part Number List
0.6× 1.0×
L×W (mm)
1.6×0.8
0.9
2.0×1.25
3.2×1.6
3.2×2.5
1.25
0.3 0.5
T max. (mm) 0.33 0.55
0.7
0.95 1.0 1.4 1.45
0.95
1.0
1.25
1.8
1.0
1.5
Rated Voltage (Vdc) 25 50 100 50 100 50 50 250 50 250 100 50 1000 630 250 1000 630 250 50 1000 630 630 1000 630 1000 630
C0G C0G C0G C0G C0G C0G C0G U2J C0G U2J C0G C0G U2J U2J U2J U2J U2J U2J C0G U2J U2J U2J U2J U2J U2J U2J
Cap. / TC Code
1.0pF p17 p17 p17
2.0pF p17 p17 p17
p17
p17
p17
p17
p17
p17
p17
p17
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18 p18
p18
3.0pF p17 p17 p17
4.0pF p17 p17 p17
5.0pF p17 p17 p17
6.0pF p17 p17 p17
7.0pF p17 p17 p17
8.0pF p17 p17 p17
9.0pF p17 p17 p17
10pF p17 p17 p17
12pF p17 p17 p17
15pF p17 p17 p17
18pF p17 p17 p17
22pF p17 p17 p17
27pF p17 p17 p17
33pF p17 p17 p17
39pF p17 p17 p17
47pF p17 p17 p17
56pF p17 p17 p17
68pF p17 p17 p17
82pF p17 p17 p17
100pF p17 p17 p17
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19 p19
p19
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
p18
120pF
150pF
p17 p17 p18
p17 p17 p18
p18
p18
p18
p18
p18
p18
p18
180pF
p17 p17 p18
p17 p17 p18
p17 p17 p18
p17 p17 p18
p17 p17 p18
p17 p17 p18
220pF
270pF
330pF
390pF
p19
p19
p19
p19
470pF
p19
560pF
p17 p18 p18
p19
680pF
p17 p18 p18
p19
820pF
p17 p18 p18
p19
p19
p19
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
p17 p18 p18 p18
p17 p18 p18 p18
p17 p18 p18 p18
p18 p18 p18
p19
p19
p19 p19
p19
p19
p19
p18
p18
p19
p19
p18 p18 p18
p19
p19
p18 p18 p18
p18 p18
p18 p18
p18 p18 p19
p18 p18 p19
p18 p18 p19
p19 p19
p19 p19
p19 p19
p19
p19
p19
p19
p19
p19
p19
p19
p18 p18 p18
p18
p18
p18
p19
p19
p18
p18
p18
p18
p18
p18
p19
p19
p19
p19
p19
p19
p18
p18
p19
p19
p19
p19
p19
p19
p19
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GCM Series Temperature Compensating Type)
p00 ←
C0G U2J
Part Number List
EIA:
3.2×2.5
2.0
4.5×3.2
5.7×5.0
L×W (mm)
1.5
2.0
1.5
2.0
T max. (mm)
1000 630 1000 630 1000 630 1000 630 1000 630 Rated Voltage (Vdc)
U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J Cap. / TC Code
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
p19
p19
p19
p19
p20
p20
p20
p20
p19
p19
p20
p20
p20
p20
p20
p20
p20
p20
p20
p20
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GCM Series High Dielectric Constant Type
p00 ←
X7R X7S
EIA:
Part Number List
L×W (mm)
0.6×0.3
0.33
1.0×0.5
0.55
1.6×0.8
0.9
2.0×1.25
3.2×1.6
0.95 1.25
T max. (mm)
0.7
0.95
1.4
Rated Voltage (Vdc) 25 16 10 100 50 25 16 100 50 25 16 6.3 100 100 50 25 16 100 50 35 25 16 10 6.3 100 100
Cap. / TC Code X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7Δ X7R X7R X7R
100pF p21
150pF p21
220pF p21
330pF p21
470pF p21
680pF p21
1000pF p21
1500pF p21
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10μF
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21
p21
p21 p21
p21 p21
p21 p21 p21
p21
p21
p21
p21
p21
p21
p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21 p21
p21
p21 p21
p21 p21
p22 p22
p22 p22
p22 p22
p22
p21 p21 p21 p21 p21
p22
0.15μF
p21 p21
p21 p21
p21
p22
p22
p22
p22
p22
0.22μF
p22
0.33μF
p21
0.47μF
p21 p21
p21
p22
0.68μF
p21
p22
p22 p22
1.0μF
p21 p21
p22 p22 p22
p22 p22 p22
p22 p22
p22 p22
2.2μF
p21
4.7μF
10μF
22μF
47μF
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GCM Series High Dielectric Constant Type)
p00 ←
X7R X7S
Part Number List
EIA:
3.2×1.6
1.8
3.2×2.5
L×W (mm)
1.25 1.3
1.9
2.2
2.7
T max. (mm)
50 25 50 25 16 10 6.3 25 100 25 16 50 35 25 16 10 6.3 Rated Voltage (Vdc)
X7R X7R X7Δ X7R X7R X7R X7R X7S X7R X7R X7R X7Δ X7S X7R X7R X7R X7R Cap. / TC Code
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10μF
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
p22
p22
p22
p22
p22
p22 p22
p22 p22 p22
p22 p22
p22
2.2μF
p22
p22
4.7μF
p22
p22 p22 p22 p22
10μF
p22
p22 p22
22μF
p22
47μF
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GCJ Series High Dielectric Constant Type
p00 ←
X7R
EIA:
Part Number List
L×W (mm)
1.6×0.8
0.9
2.0×1.25
1.0
3.2×1.6
1.25
T max. (mm)
0.7
0.95
1.45
0.95
1.35
Rated Voltage (Vdc) 100 50 25 16 10 100 50 25 100 50 25 16 250 250 100 50 25 16 10 100 50 1000 630 250 100 50
X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
Cap. / TC Code
220pF
p25
p25
270pF
330pF
p25
p25
p25
p25
390pF
470pF
p25 p25 p25
p25 p25 p25
p25 p25 p25
p25 p25 p25
560pF
680pF
820pF
1000pF p24 p24 p24
p24 p25 p25
p25
p25
p25
p25
p25
p25
p26 p26
1200pF p24 p24 p24
1500pF p24 p24 p24
1800pF p24 p24 p24
2200pF p24 p24 p24
2700pF p24 p24 p24
3300pF p24 p24 p24
3900pF p24 p24 p24
p24 p25 p25
p24 p25 p25
p24 p25 p25
p24 p25 p25
p24 p25 p25
p24 p25 p25
p24 p25 p25
p24 p25 p25
p24 p25 p25
p25 p25 p25
p25 p25 p25
p25 p25 p25
p25 p25 p25
p25 p25
p26
p26
p26
p26
p26 p26
p26 p26
p26
p24 p24 p24
p24 p24 p24
p24 p24 p24
p24 p24 p24
p24 p24 p24 p24
4700pF
5600pF
6800pF
8200pF
10000pF
p25
p25
p25
p26
12000pF p24 p24 p24
15000pF p24 p24 p24
18000pF p24 p24 p24
22000pF p24 p24 p24
p25
p25
p25
p26
p26
p25 p25
p25 p25
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10μF
0.12μF
0.15μF
0.18μF
0.22μF
0.27μF
0.33μF
0.39μF
0.47μF
0.56μF
0.68μF
0.82μF
1.0μF
p24 p24
p25 p25
p25 p25
p25 p25
p25
p25
p24 p24 p24
p24 p24 p24
p24 p24 p24
p24 p24 p24
p24 p24 p24
p24 p24 p24
p24 p24 p24
p25
p25 p25 p25
p25 p25 p25
p25 p25 p25
p25 p25 p25
p25 p25 p25
p25
p26
p26 p26
p26
p24 p24 p24
p24 p24 p24
p25
p26 p26
p26 p26
p26 p26
p26
p24 p24 p24
p25
p24 p24 p24
p25
p24
p24
p24
p24
p25 p26
p25
p25
p25
p26
p25 p26
p26
p26
p26
p25
p26
p25 p26
p25
p26
p25
p25
p25
p26
p25
p26
p26 p26
p26
1.5μF
2.2μF
p26 p26
3.3μF
4.7μF
6.8μF
10μF
22μF
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GCJ Series High Dielectric Constant Type)
p00 ←
X7R
Part Number List
EIA:
3.2×1.6
3.2×2.5
2.0
4.5×3.2
5.7×5.0
2.0
L×W (mm)
1.35
1.8
1.9
1.5
2.3
2.8
1.5
2.0
T max. (mm)
25 16 1000 630 250 50 25 16 10 6.3 630 250 1000 630 250 100 50 25 630 250 1000 630 250 1000 630 250 Rated Voltage (Vdc)
X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R Cap. / TC Code
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10μF
0.12μF
0.15μF
0.18μF
0.22μF
0.27μF
0.33μF
0.39μF
0.47μF
0.56μF
0.68μF
0.82μF
1.0μF
p26
p26
p26
p26
p26
p26
p26 p26
p26 p26
p26
p26
p26
p26 p26
p26 p26
p26
p26
p26
p26
p27
p26
p26
p26
p26
p26
p26
p26
p26
p26
p27 p27
p27
p26
p26
p26
p26
p27
p27
p27
p27
p27
p26 p26
p26 p26
p26
1.5μF
p26
p26
2.2μF
p26
3.3μF
p26
p26
4.7μF
p26 p26
p26
6.8μF
p26
p26 p26
10μF
p26
22μF
p26
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GCD Series High Dielectric Constant Type
c GCE Series High Dielectric Constant Type
p00 ←
p00 ←
X7R
X7R
EIA:
Part Number List
EIA:
Part Number List
L×W (mm)
1.6×0.8
0.9
2.0×1.25
0.95
L×W (mm) 1.6×0.8
2.0×1.25
0.95
Rated Voltage (Vdc) 100 50 100 50 100 100 50
X7R X7R X7R X7R X7R X7R X7R
T max. (mm)
0.7
1.4
T max. (mm)
0.9
0.7
1.45
Rated Voltage (Vdc) 100 50 25 100 50 100 100 50
Cap. / TC Code X7R X7R X7R X7R X7R X7R X7R X7R
Cap. / TC Code
1000pF p31 p31 p31 p31
1000pF p29 p29
1200pF p29 p29
1500pF p29 p29
1800pF p29 p29
2200pF p29 p29
2700pF p29 p29
3300pF p29 p29
3900pF p29 p29
4700pF p29 p29
p29 p29
p29 p29
p29 p29
p29 p29
p29 p29
p29 p29
p29 p29
p29 p29
p29 p29
p29 p29
1200pF p31 p31 p31 p31
1500pF p31 p31 p31 p31
1800pF p31 p31 p31 p31
2200pF p31 p31 p31 p31
2700pF p31 p31 p31 p31
3300pF p31 p31 p31 p31
3900pF p31 p31 p31 p31
4700pF p31 p31 p31 p31
5600pF
6800pF
p29
p29
p29
p29
p29
p29
p29
p29
5600pF
6800pF
p31 p31 p31
p29
p31
p31
p31
p31
p31
p31
p31
p31
8200pF
p29
p29
p29
8200pF
p31
p31
p31
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10μF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10μF
p29
p29
p29
p29
p29
p29
p29
p29
p29
p29
p29
p31
p31
p31
p31
p31
p31
p31
p31
p31
p31
p31
p29
p29
p29
p29
12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GCG Series
Temperature Compensating Type
High Dielectric Constant Type
p00 ←
Part Number List
X8G
X7R
X8L
Murata Temperature Characteristic:
Murata Temperature Characteristic:
1.6×
EIA:
L×W (mm)
2.0×1.25
L×W (mm)
T max. (mm)
Rated Voltage (Vdc) 50
1.0×0.5
0.55
1.6×0.8
0.9
2.0×1.25
1.45
3.2×1.6
1.35
16 25 16 25 16 25 25
3.2×2.5
0.8
T max. (mm) 0.9 0.7 0.95
Rated Voltage (Vdc) 50 50 50
Cap. / TC Code X8G X8G X8G
10pF p33
1.9
2.3 2.8
25
16
50
25 16
50
25
Cap. / TC Code X7R X8L X7R X8L X7R X8L X7R X7R X8L X8L X7R X8L X7R X8L X7R X8L X7R X8L X7R X7R
220pF p34
270pF p34
330pF p34
390pF p34
470pF p34
560pF p34
680pF p34
820pF p34
1000pF p34
1200pF p34
1500pF p34
1800pF p34
2200pF p34
2700pF p34
3300pF p34
3900pF p34
4700pF p34
5600pF
p34
12pF p33
p34
15pF p33
p34
18pF p33
p34
22pF p33
p34
27pF p33
p34
33pF p33
p34
39pF p33
p34
47pF p33
p34
56pF p33
p34
68pF p33
p34
82pF p33
p34
p34
100pF p33 p33
120pF p33 p33
150pF p33 p33
180pF p33 p33
220pF p33 p33
270pF p33 p33
330pF p33 p33
390pF p33 p33
470pF p33 p33
560pF p33 p33
680pF p33 p33
820pF p33 p33
1000pF p33 p33
1200pF p33 p33
1500pF p33 p33
1800pF p33 p33
2200pF p33 p33
p34
p34
p34
p34
p34 p34
p34 p34
p34 p34
p34 p34
p34
6800pF
p34
8200pF
p34
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10μF
p34
p34
p34 p34 p34
p34 p34 p34
p34 p34 p34
p34 p34
p34 p34
p34 p34
p34 p34
p34
p34
p34
p34
p34
p34
p34
p34
p34
p34
p34
p34
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
p33
p33
p33
p33
p34
p34
p34
p34
p34
p33
p33
p33
p33
0.12μF
p34
0.15μF
p34 p34
p34
p34
p34
p34
0.18μF
0.22μF
p34 p34
0.27μF
p34
0.33μF
p34 p34 p35
p34 p35
p34 p35
p34 p35
p35 p35
p35 p35
p35
0.39μF
0.47μF
0.56μF
0.68μF
0.82μF
1.0μF
p35 p35
p35
1.2μF
1.5μF
p35 p35
p35
2.2μF
3.3μF
p35 p35 p35
p35
3.9μF
4.7μF
p35 p35
p35
p35
10μF
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GC3 Series High Dielectric Constant Type
p00 ←
X7T
EIA:
Part Number List
L×W (mm) 2.0×1.25
3.2×1.6
1.25
3.2×2.5
4.5×3.2
2.0
5.7×5.0
T max. (mm) 1.0 1.45
1.0
1.8
1.5
2.0
1.5
2.0
2.7
Rated Voltage (Vdc) 250 250 450 250 630 450 250 630 450 250 630 250 630 450 250 250 630 450 250 630 450 250 630 450 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
10000pF p37
15000pF p37
22000pF
33000pF
47000pF
68000pF
0.10μF
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
p37
0.15μF
p37
p37
0.22μF
p37
p37
p37
p37
0.27μF
0.33μF
p37
p37
0.47μF
p37 p37
0.56μF
p37
0.68μF
p37
1.0μF
p37
c KCM Series High Dielectric Constant Type
p00 ←
X7R
Part Number List
EIA:
L×W (mm)
6.1×5.3
T max. (mm)
3.0
3.9
5.0
6.7
Rated Voltage (Vdc) 100 63 50 35 25 100 63 50 35 25 100 35 25 100 63 50 35 25
Cap. / TC Code X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
4.7μF p40 p40 p40
6.8μF
10μF
15μF
17μF
22μF
33μF
47μF
p40
p40
p40 p40
p40
p40
p40
p40
p40
p40
p40 p40
p40
p40
p40
c KC3 Series High Dielectric Constant Type
p00 ←
X7T
EIA:
Part Number List
L×W (mm)
6.1×5.3
3.9
T max. (mm)
3.0
5.0
6.7
Rated Voltage (Vdc) 630 450 250 630 450 250 450 630 450 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
0.10μF p43
0.15μF p43
0.22μF
0.27μF
0.47μF
0.56μF
1.0μF
p43
p43
p43
p43 p43
p43
p43
p43
p43 p43
1.2μF
p43
2.2μF
p43
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Specifications and Test Methods, Package, Chart of Characteristic Data,
please refer to the search web page.
Search Capacitors
http://www.murata.com/products/capacitor/
Data Sheet
The product details page can be output in PDF.
Status and Features Icons
The status and features of products can be checked at
once. When is clicked, a description of each icon
will be displayed.
Characteristics & Applications
This links to the introduction page of each series.
Detailed Specifications Sheet
Rated value
s
Specifications and Test Methods
s
Package
s
s
Caution, Notice
(Storage, Soldering and Mounting, ....etc.)
Characteristics Data
The following characteristics data of the
main products can be acquired.
SPICE Netlist (mod type)
s
S parameter (S2P type)
s
Reliability Test Data *Typical data
s
Shape (Dimensions)
s
s
Rated Values
Specification by Packaging Code/
s
Minimum Order Quantity
Weight (1 pc/ø180mm reel)
s
Chart of Characteristic Data
The main products published characteristic data.
Frequency characteristics (ESR, Impedance)
s
S parameter (Smith chart S11)
s
DC bias characteristics
s
AC voltage characteristics
s
Capacitance - temperature characteristics
s
Calorific property by ripple current
s
15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
General Purpose Product
AEC-
Q200
GCM Series
Capacitor for automotive applications such as power train and safety equipment.
Features
1
Ideal for power trains and safety devices in automobiles.
This product can be used for safety devices, such as the drive system control for engine ECU, air bags, and ABS.
This product has cleared test conditions more severe than that of general products (GRM Series) even in
temperature cycle and humidity load tests.
General Purpose GRM Series
GCM Series for Automobiles
Maximum operating temperature: 85°C/105°C/125°C
Maximum operating temperature: 125°C
Items
Test Method
Test Method
Temperature Cycle: 100 cycles
(1,000 cycles for AEC-Q200 conforming products)
Temperature Cycle Temperature Cycle: 5 cycles
Test temperature: 85 2°C
Test humidity: 80 to 85%RH
Test time: 500 hours
Test temperature: 40 2°C
Humidity Loading Test humidity: 90 to 95%RH
Test time: 500 hours
(1,000 hours for AEC-Q200 conforming products)
2
3
Can be used at 125°C and 150°C temperatures.
We also offer a lineup for 150°C that can be used in the engine room.
Sn plating is applied to the external electrodes; excellent solder ability.
Internal Electrodes
Ni/Sn Plated Layer
Ceramic
Foundation Electrode Layer
<Example of Structure>
Specifications
e
g
e
Size
0.6×0.3mm to 5.7×5.0mm
DC6.3 to 1kV
T
Rated Voltage
Capacitance
0.1pF to 47μF
W
L
Main Applications Drive system control of engine ECU, Airbag, Safety equipment such as ABS
<Dimensions>
16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCM Series Temperature Compensating Type Q200 Part Number List
T
max.
Rated
Voltage Code
TC
Ultra-
Cap.
Tol.
Part Number
0.6×0.3mm
c
compact
0.55mm 50Vdc
C0G
220pF
270pF
330pF
390pF
470pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM1555C1H221JA16#
GCM1555C1H271JA16#
GCM1555C1H331JA16#
GCM1555C1H391JA16#
GCM1555C1H471JA16#
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.33mm 25Vdc
C0G
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
0.25pF GCM0335C1E1R0CD03#
0.25pF GCM0335C1E2R0CD03#
0.25pF GCM0335C1E3R0CD03#
0.25pF GCM0335C1E4R0CD03#
0.25pF GCM0335C1E5R0CD03#
0.5pF GCM0335C1E6R0DD03#
0.5pF GCM0335C1E7R0DD03#
0.5pF GCM0335C1E8R0DD03#
0.5pF GCM0335C1E9R0DD03#
1.6×0.8mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.9mm 100Vdc C0G
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
0.25pF GCM1885C2A1R0CA16#
0.25pF GCM1885C2A2R0CA16#
0.25pF GCM1885C2A3R0CA16#
0.25pF GCM1885C2A4R0CA16#
0.25pF GCM1885C2A5R0CA16#
0.5pF GCM1885C2A6R0DA16#
0.5pF GCM1885C2A7R0DA16#
0.5pF GCM1885C2A8R0DA16#
0.5pF GCM1885C2A9R0DA16#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM0335C1E100JD03#
GCM0335C1E120JD03#
GCM0335C1E150JD03#
GCM0335C1E180JD03#
GCM0335C1E220JD03#
GCM0335C1E270JD03#
GCM0335C1E330JD03#
GCM0335C1E390JD03#
GCM0335C1E470JD03#
GCM0335C1E560JD03#
GCM0335C1E680JD03#
GCM0335C1E820JD03#
GCM0335C1E101JD03#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM1885C2A100JA16#
GCM1885C2A120JA16#
GCM1885C2A150JA16#
GCM1885C2A180JA16#
GCM1885C2A220JA16#
GCM1885C2A270JA16#
GCM1885C2A330JA16#
GCM1885C2A390JA16#
GCM1885C2A470JA16#
GCM1885C2A560JA16#
GCM1885C2A680JA16#
GCM1885C2A820JA16#
GCM1885C2A101JA16#
GCM1885C2A121JA16#
GCM1885C2A151JA16#
GCM1885C2A181JA16#
GCM1885C2A221JA16#
GCM1885C2A271JA16#
GCM1885C2A331JA16#
GCM1885C2A391JA16#
GCM1885C2A471JA16#
GCM1885C2A561JA16#
GCM1885C2A681JA16#
GCM1885C2A821JA16#
GCM1885C2A102JA16#
GCM1885C2A122JA16#
GCM1885C2A152JA16#
12pF
15pF
18pF
22pF
27pF
33pF
1.0×0.5mm
c
39pF
47pF
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
56pF
0.55mm 50Vdc
C0G
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
0.25pF GCM1555C1H1R0CA16#
0.25pF GCM1555C1H2R0CA16#
0.25pF GCM1555C1H3R0CA16#
0.25pF GCM1555C1H4R0CA16#
0.25pF GCM1555C1H5R0CA16#
0.5pF GCM1555C1H6R0DA16#
0.5pF GCM1555C1H7R0DA16#
0.5pF GCM1555C1H8R0DA16#
0.5pF GCM1555C1H9R0DA16#
68pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM1555C1H100JA16#
GCM1555C1H120JA16#
GCM1555C1H150JA16#
GCM1555C1H180JA16#
GCM1555C1H220JA16#
GCM1555C1H270JA16#
GCM1555C1H330JA16#
GCM1555C1H390JA16#
GCM1555C1H470JA16#
GCM1555C1H560JA16#
GCM1555C1H680JA16#
GCM1555C1H820JA16#
GCM1555C1H101JA16#
GCM1555C1H121JA16#
GCM1555C1H151JA16#
GCM1555C1H181JA16#
50Vdc
C0G
0.25pF GCM1885C1H1R0CA16#
0.25pF GCM1885C1H2R0CA16#
0.25pF GCM1885C1H3R0CA16#
0.25pF GCM1885C1H4R0CA16#
0.25pF GCM1885C1H5R0CA16#
0.5pF GCM1885C1H6R0DA16#
0.5pF GCM1885C1H7R0DA16#
0.5pF GCM1885C1H8R0DA16#
Part number # indicates the package specification code.
17
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCM Series Temperature Compensating Type Q200 Part Number List
→
(
1.6×0.8mm)
c
T
max.
Rated
Voltage Code
TC
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
0.9mm
50Vdc
C0G
9.0pF
10pF
0.5pF GCM1885C1H9R0DA16#
0.7mm 100Vdc C0G
2200pF
2700pF
3300pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
100pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM2165C2A222JA16#
GCM2165C2A272JA16#
GCM2165C2A332JA16#
GCM2165C1H102JA16#
GCM2165C1H122JA16#
GCM2165C1H152JA16#
GCM2165C1H182JA16#
GCM2165C1H222JA16#
GCM2165C1H272JA16#
GCM2165C1H332JA16#
GCM2165C1H392JA16#
GCM2165C1H472JA16#
GCM2195C1H562JA16#
GCM2195C1H682JA16#
GCM2195C1H822JA16#
GCM2195C1H103JA16#
GCM2195C1H123JA16#
GCM2195C1H153JA16#
GCM21A7U2E101JX01D
GCM21A7U2E121JX01D
GCM21A7U2E151JX01D
GCM21A7U2E181JX01D
GCM21A7U2E221JX01D
GCM21A7U2E271JX01D
GCM21A7U2E331JX01D
GCM21A7U2E391JX01D
GCM21A7U2E471JX01D
GCM21A7U2E561JX01D
GCM21A7U2E681JX01D
GCM21A7U2E821JX01D
GCM21A7U2E102JX01D
GCM21A7U2E122JX01D
GCM21A7U2E152JX01D
GCM21A7U2E182JX01D
GCM21A7U2E222JX01D
GCM21B5C1H183JA16#
GCM21B5C1H223JA16#
GCM21B7U2E272JX03L
GCM21B7U2E332JX03L
GCM21B7U2E392JX03L
GCM21B7U2E472JX03L
GCM21B7U2E562JX03L
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM1885C1H100JA16#
GCM1885C1H120JA16#
GCM1885C1H150JA16#
GCM1885C1H180JA16#
GCM1885C1H220JA16#
GCM1885C1H270JA16#
GCM1885C1H330JA16#
GCM1885C1H390JA16#
GCM1885C1H470JA16#
GCM1885C1H560JA16#
GCM1885C1H680JA16#
GCM1885C1H820JA16#
GCM1885C1H101JA16#
GCM1885C1H121JA16#
GCM1885C1H151JA16#
GCM1885C1H181JA16#
GCM1885C1H221JA16#
GCM1885C1H271JA16#
GCM1885C1H331JA16#
GCM1885C1H391JA16#
GCM1885C1H471JA16#
GCM1885C1H561JA16#
GCM1885C1H681JA16#
GCM1885C1H821JA16#
GCM1885C1H102JA16#
GCM1885C1H122JA16#
GCM1885C1H152JA16#
GCM1885C1H182JA16#
GCM1885C1H222JA16#
GCM1885C1H272JA16#
GCM1885C1H332JA16#
GCM1885C1H392JA16#
12pF
15pF
50Vdc
C0G
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
0.95mm 50Vdc
C0G
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
1.0mm 250Vdc U2J
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2.0×1.25mm
c
1.4mm
50Vdc
C0G 18000pF
22000pF
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.45mm 250Vdc U2J
2700pF
3300pF
3900pF
4700pF
5600pF
0.7mm 100Vdc C0G
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM2165C2A101JA16#
GCM2165C2A121JA16#
GCM2165C2A151JA16#
GCM2165C2A181JA16#
GCM2165C2A221JA16#
GCM2165C2A271JA16#
GCM2165C2A331JA16#
GCM2165C2A391JA16#
GCM2165C2A471JA16#
GCM2165C2A561JA16#
GCM2165C2A681JA16#
GCM2165C2A821JA16#
GCM2165C2A102JA16#
GCM2165C2A122JA16#
GCM2165C2A152JA16#
GCM2165C2A182JA16#
3.2×1.6mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.95mm 100Vdc C0G
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM3195C2A182JA16#
GCM3195C2A222JA16#
GCM3195C2A272JA16#
GCM3195C2A332JA16#
GCM3195C2A392JA16#
GCM3195C2A472JA16#
GCM3195C2A562JA16#
Part number # indicates the package specification code.
18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCM Series Temperature Compensating Type Q200 Part Number List
→
(
3.2×1.6mm)
c
T
max.
Rated
Voltage Code
TC
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
0.95mm 100Vdc C0G
6800pF
8200pF
10000pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
10pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM3195C2A682JA16#
GCM3195C2A822JA16#
GCM3195C2A103JA16#
GCM3195C1H392JA16#
GCM3195C1H472JA16#
GCM3195C1H562JA16#
GCM3195C1H682JA16#
GCM3195C1H822JA16#
GCM3195C1H103JA16#
GCM3195C1H123JA16#
GCM3195C1H153JA16#
GCM3195C1H183JA16#
GCM3195C1H223JA16#
GCM3195C1H273JA16#
GCM3195C1H333JA16#
GCM3195C1H393JA16#
GCM31A7U3A100JX01D
GCM31A7U3A120JX01D
GCM31A7U3A150JX01D
GCM31A7U3A180JX01D
GCM31A7U3A220JX01D
GCM31A7U3A270JX01D
GCM31A7U3A330JX01D
GCM31A7U3A390JX01D
GCM31A7U3A470JX01D
GCM31A7U3A560JX01D
GCM31A7U3A680JX01D
GCM31A7U3A820JX01D
GCM31A7U3A101JX01D
GCM31A7U3A121JX01D
GCM31A7U3A151JX01D
GCM31A7U3A181JX01D
GCM31A7U3A221JX01D
GCM31A7U3A271JX01D
GCM31A7U3A331JX01D
GCM31A7U2J100JX01D
GCM31A7U2J120JX01D
GCM31A7U2J150JX01D
GCM31A7U2J180JX01D
GCM31A7U2J220JX01D
GCM31A7U2J270JX01D
GCM31A7U2J330JX01D
GCM31A7U2J390JX01D
GCM31A7U2J470JX01D
GCM31A7U2J560JX01D
GCM31A7U2J680JX01D
GCM31A7U2J820JX01D
GCM31A7U2J101JX01D
GCM31A7U2J121JX01D
GCM31A7U2J151JX01D
GCM31A7U2J181JX01D
GCM31A7U2J221JX01D
GCM31A7U2J271JX01D
GCM31A7U2J331JX01D
1.0mm 630Vdc U2J
390pF
470pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM31A7U2J391JX01D
GCM31A7U2J471JX01D
GCM31A7U2J561JX01D
GCM31A7U2J681JX01D
GCM31A7U2J821JX01D
GCM31A7U2J102JX01D
GCM31A7U2J122JX01D
GCM31A7U2J152JX01D
GCM31A7U2J182JX01D
GCM31A7U2J222JX01D
GCM31A7U2E272JX01D
GCM31A7U2E332JX01D
GCM31A7U2E392JX01D
GCM31A7U2E472JX01D
GCM31A7U2E562JX01D
GCM31B7U3A391JX01L
GCM31B7U3A471JX01L
GCM31B7U3A561JX01L
GCM31B7U3A681JX01L
GCM31B7U2J272JX01L
GCM31B7U2J332JX01L
GCM31B7U2E682JX01L
GCM31B7U2E822JX01L
GCM31B7U2E103JX01L
GCM31M5C1H473JA16#
GCM31M5C1H563JA16#
GCM31C7U3A821JX03L
GCM31C7U3A102JX03L
GCM31C7U2J392JX03L
GCM31C7U2J472JX03L
560pF
50Vdc
C0G
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
390pF
250Vdc U2J
1.25mm 1000Vdc U2J
1.0mm 1000Vdc U2J
470pF
12pF
560pF
15pF
680pF
18pF
630Vdc U2J
250Vdc U2J
2700pF
3300pF
6800pF
8200pF
10000pF
22pF
27pF
33pF
39pF
47pF
50Vdc
C0G 47000pF
56000pF
56pF
68pF
1.8mm 1000Vdc U2J
820pF
1000pF
3900pF
4700pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
10pF
630Vdc U2J
3.2×2.5mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
630Vdc U2J
1.0mm 630Vdc U2J
1200pF
1500pF
1800pF
2200pF
1200pF
5600pF
1500pF
6800pF
1800pF
2200pF
8200pF
10000pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM32A7U2J122JX01D
GCM32A7U2J152JX01D
GCM32A7U2J182JX01D
GCM32A7U2J222JX01D
GCM32B7U3A122JX01L
GCM32B7U2J562JX01L
GCM32Q7U3A152JX01L
GCM32Q7U2J682JX01L
GCM32D7U3A182JX01L
GCM32D7U3A222JX01L
GCM32D7U2J822JX01L
GCM32D7U2J103JX01L
12pF
15pF
18pF
22pF
1.25mm 1000Vdc U2J
630Vdc U2J
27pF
33pF
1.5mm 1000Vdc U2J
630Vdc U2J
39pF
47pF
2.0mm 1000Vdc U2J
56pF
68pF
630Vdc U2J
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
4.5×3.2mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.5mm 1000Vdc U2J
2700pF
3300pF
5ꢀ
5ꢀ
GCM43Q7U3A272JX01L
GCM43Q7U3A332JX01L
Part number # indicates the package specification code.
19
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCM Series Temperature Compensating Type Q200 Part Number List
→
(
4.5×3.2mm)
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.5mm 630Vdc U2J 12000pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM43Q7U2J123JX01L
GCM43D7U3A392JX01L
GCM43D7U3A472JX01L
GCM43D7U2J153JX01L
GCM43D7U2J183JX01L
GCM43D7U2J223JX01L
2.0mm 1000Vdc U2J
3900pF
4700pF
630Vdc U2J 15000pF
18000pF
22000pF
5.7×5.0mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.5mm 1000Vdc U2J
5600pF
6800pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCM55Q7U3A562JX01L
GCM55Q7U3A682JX01L
GCM55Q7U2J273JX01L
GCM55D7U3A822JX01L
GCM55D7U3A103JX01L
GCM55D7U2J333JX01L
GCM55D7U2J393JX01L
GCM55D7U2J473JX01L
630Vdc U2J 27000pF
2.0mm 1000Vdc U2J
8200pF
10000pF
630Vdc U2J 33000pF
39000pF
47000pF
Part number # indicates the package specification code.
20
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCM Series High Dielectric Constant Type Q200 Part Number List
Ultra-
0.6×0.3mm
1.6×0.8mm
c
c
compact
T
max.
Rated
Voltage Code
TC
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
0.33mm 25Vdc
X7R
100pF
150pF
10ꢀ GCM033R71E101KA03#
10ꢀ GCM033R71E151KA03#
10ꢀ GCM033R71E221KA03#
10ꢀ GCM033R71E331KA03#
10ꢀ GCM033R71E471KA03#
10ꢀ GCM033R71E681KA03#
10ꢀ GCM033R71E102KA03#
10ꢀ GCM033R71E152KA03#
10ꢀ GCM033R71C222KA55#
10ꢀ GCM033R71C332KA55#
10ꢀ GCM033R71A472KA03#
10ꢀ GCM033R71A682KA03#
10ꢀ GCM033R71A103KA03#
0.9mm 100Vdc X7R
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
0.10µF
10ꢀ GCM188R72A102KA37#
10ꢀ GCM188R72A152KA37#
10ꢀ GCM188R72A222KA37#
10ꢀ GCM188R72A332KA37#
10ꢀ GCM188R72A472KA37#
10ꢀ GCM188R72A682KA37#
10ꢀ GCM188R72A103KA37#
10ꢀ GCM188R72A153KA37#
10ꢀ GCM188R72A223KA37#
10ꢀ GCM188R72A104KA64#
10ꢀ GCM188R71H102KA37#
10ꢀ GCM188R71H152KA37#
10ꢀ GCM188R71H222KA37#
10ꢀ GCM188R71H332KA37#
10ꢀ GCM188R71H472KA37#
10ꢀ GCM188R71H682KA37#
10ꢀ GCM188R71H103KA37#
10ꢀ GCM188R71H153KA37#
10ꢀ GCM188R71H223KA37#
10ꢀ GCM188R71H333KA55#
10ꢀ GCM188R71H473KA55#
10ꢀ GCM188R71H683KA57#
10ꢀ GCM188R71H104KA57#
10ꢀ GCM188R71H154KA64#
10ꢀ GCM188R71H224KA64#
10ꢀ GCM188R71E333KA37#
10ꢀ GCM188R71E473KA37#
10ꢀ GCM188R71E683KA57#
10ꢀ GCM188R71E104KA57#
10ꢀ GCM188R71E154KA37#
10ꢀ GCM188R71E224KA55#
10ꢀ GCM188R71E474KA64#
10ꢀ GCM188R71E105KA64#
10ꢀ GCM188R71C104KA37#
10ꢀ GCM188R71C334KA37#
10ꢀ GCM188R71C474KA55#
10ꢀ GCM188R71C105KA64#
10ꢀ GCM188R70J225KE22#
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
16Vdc
10Vdc
X7R
X7R
50Vdc
X7R
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.10µF
1.0×0.5mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.55mm 100Vdc X7R
220pF
330pF
10ꢀ GCM155R72A221KA37#
10ꢀ GCM155R72A331KA37#
10ꢀ GCM155R72A471KA37#
10ꢀ GCM155R72A681KA37#
10ꢀ GCM155R72A102KA37#
10ꢀ GCM155R72A152KA37#
10ꢀ GCM155R72A222KA37#
10ꢀ GCM155R72A332KA37#
10ꢀ GCM155R72A472KA37#
10ꢀ GCM155R71H221KA37#
10ꢀ GCM155R71H331KA37#
10ꢀ GCM155R71H471KA37#
10ꢀ GCM155R71H681KA37#
10ꢀ GCM155R71H102KA37#
10ꢀ GCM155R71H152KA37#
10ꢀ GCM155R71H222KA37#
10ꢀ GCM155R71H332KA37#
10ꢀ GCM155R71H472KA37#
10ꢀ GCM155R71H682KA55#
10ꢀ GCM155R71H103KA55#
10ꢀ GCM155R71H153KA55#
10ꢀ GCM155R71H223KA55#
10ꢀ GCM155R71E103KA37#
10ꢀ GCM155R71E153KA55#
10ꢀ GCM155R71E223KA55#
10ꢀ GCM155R71E333KA55#
10ꢀ GCM155R71E473KA55#
10ꢀ GCM155R71C333KA37#
10ꢀ GCM155R71C473KA37#
10ꢀ GCM155R71C683KA55#
10ꢀ GCM155R71C104KA55#
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
220pF
0.15µF
0.22µF
25Vdc
X7R 33000pF
47000pF
68000pF
0.10µF
50Vdc
X7R
330pF
470pF
0.15µF
680pF
0.22µF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
0.47µF
1.0µF
16Vdc
X7R
X7R
0.10µF
0.33µF
0.47µF
1.0µF
6.3Vdc
2.2µF
2.0×1.25mm
c
25Vdc
16Vdc
X7R 10000pF
15000pF
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
22000pF
33000pF
0.7mm 100Vdc X7R
6800pF
10000pF
15000pF
22000pF
10ꢀ GCM216R72A682KA37#
10ꢀ GCM216R72A103KA37#
10ꢀ GCM216R72A153KA37#
10ꢀ GCM216R72A223KA37#
10ꢀ GCM219R72A333KA37#
10ꢀ GCM219R71H333KA37#
10ꢀ GCM219R71H334KA55#
10ꢀ GCM219R71E474KA55#
10ꢀ GCM219R71C684KA37#
47000pF
X7R 33000pF
47000pF
68000pF
0.95mm 100Vdc X7R 33000pF
0.10µF
50Vdc
X7R 33000pF
0.33µF
25Vdc
16Vdc
X7R
X7R
0.47µF
0.68µF
Part number # indicates the package specification code.
21
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCM Series High Dielectric Constant Type Q200 Part Number List
→
(
2.0×1.25mm)
c
T
max.
Rated
Voltage Code
TC
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
0.95mm 16Vdc
X7R
1.0µF
10ꢀ GCM219R71C105KA37#
10ꢀ GCM21BR72A473KA37#
10ꢀ GCM21BR72A683KA37#
10ꢀ GCM21BR72A104KA37#
10ꢀ GCM21BR71H473KA37#
10ꢀ GCM21BR71H683KA37#
10ꢀ GCM21BR71H104KA37#
10ꢀ GCM21BR71H154KA37#
10ꢀ GCM21BR71H224KA37#
10ꢀ GCM21BR71H474KA55#
10ꢀ GCM21BR71H105KA03#
10ꢀ GCM21BR7YA684KA55#
10ꢀ GCM21BR7YA105KA55#
10ꢀ GCM21BR71E154KA37#
10ꢀ GCM21BR71E224KA37#
10ꢀ GCM21BR71E334KA37#
10ꢀ GCM21BR71E684KA55#
10ꢀ GCM21BR71E105KA56#
10ꢀ GCM21BR71E225KA73#
10ꢀ GCM21BR71C225KA64#
10ꢀ GCM21BR71C475KA73#
10ꢀ GCM21BR71A225KA37#
10ꢀ GCM21BR71A106KE22#
10ꢀ GCM21BC71A475KA73#
10ꢀ GCM21BR70J106KE22#
2.7mm
50Vdc
X7R
1.0µF
4.7µF
10µF
10µF
10µF
22µF
22µF
47µF
10ꢀ GCM32ER71H105KA37#
10ꢀ GCM32ER71H475KA55#
10ꢀ GCM32EC71H106KA03#
1.4mm 100Vdc X7R 47000pF
68000pF
0.10µF
X7S
X7S
X7R
X7R
X7R
X7R
35Vdc
25Vdc
16Vdc
10Vdc
6.3Vdc
10ꢀ GCM32EC7YA106KA03#
10ꢀ GCM32ER71E106KA57#
20ꢀ GCM32ER71C226ME19#
20ꢀ GCM32ER71A226ME12#
20ꢀ GCM32ER70J476ME19#
50Vdc
X7R 47000pF
68000pF
0.10µF
0.15µF
0.22µF
0.47µF
1.0µF
35Vdc
25Vdc
X7R
X7R
0.68µF
1.0µF
0.15µF
0.22µF
0.33µF
0.68µF
1.0µF
2.2µF
2.2µF
4.7µF
2.2µF
10µF
16Vdc
10Vdc
X7R
X7R
X7S
X7R
4.7µF
10µF
6.3Vdc
3.2×1.6mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.95mm 100Vdc X7R
1.25mm 100Vdc X7R
0.10µF
0.15µF
0.22µF
0.33µF
0.47µF
0.68µF
1.0µF
2.2µF
2.2µF
4.7µF
4.7µF
4.7µF
10µF
10ꢀ GCM319R72A104KA37#
10ꢀ GCM31MR72A154KA37#
10ꢀ GCM31MR72A224KA37#
10ꢀ GCM31MR71H334KA37#
10ꢀ GCM31MR71H474KA37#
10ꢀ GCM31MR71H684KA55#
10ꢀ GCM31MR71H105KA55#
10ꢀ GCM31MR71E225KA57#
10ꢀ GCM31CR71H225KA55#
10ꢀ GCM31CC71H475KA03#
10ꢀ GCM31CR71E475KA55#
10ꢀ GCM31CR71C475KA37#
10ꢀ GCM31CR71C106KA64#
10ꢀ GCM31CR71A106KA64#
20ꢀ GCM31CR70J226ME23#
10ꢀ GCM31CC71E106KA03#
50Vdc
X7R
1.3mm
1.8mm
25Vdc
50Vdc
X7R
X7R
X7S
X7R
X7R
25Vdc
16Vdc
10Vdc
6.3Vdc
25Vdc
X7R
X7R
X7S
10µF
22µF
1.9mm
10µF
3.2×2.5mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
2.2mm 100Vdc X7R
2.2µF
4.7µF
10µF
10ꢀ GCM32DR72A225KA64#
10ꢀ GCM32DR71E475KA55#
10ꢀ GCM32DR71C106KA37#
25Vdc
16Vdc
X7R
X7R
Part number # indicates the package specification code.
22
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Resin External Electrode Product
AEC- Fail
Q200 safe
Deflecting
crack
GCJ Series
The resin external electrodes prevent the occurrence of cracking caused by
deflection stress after board mounting!
Features
1
The resin external electrodes suppress cracks by board deflection.
Cracking of the ceramic element is suppressed by the resin of the external electrodes, which releases the stress.
Internal Electrodes
For Automobiles (GCM Series)
o
Resin Electrodes Layer
Ceramic
Occurrence of cracking on
edge of terminal electrode
Foundation Electrode Layer Ni/Sn Plated Layer
Resin electrodes relieve the stress
<Example of Structure>
Resin External Electrode Type (GCJ Series)
o
Separated foundation
electrode and resin electrode
Conductive resin layer relieves
the mechanical stress of the ceramic
2
Suppresses the occurrence of cracking caused by deflection stress at the time of board mounting,
etc.
100
GCJ/1608 (in mm)/0603 (in inch)
GCM/1608 (in mm)/0603 (in inch)
80
60
40
20
0
0
2
4
6
8
Deflection Amount (mm)
Due to the specification of the measuring instrument, measurements can be performed up to 8mm.
3
Ideal for automobiles.
This AEC-Q200 conforming product is ideal for the ECU, control circuits of headlights, etc. of automobiles.
Specifications
e
g
e
Size
1.6×0.8mm to 5.7×5.0mm
DC10 to 1kV
T
Rated Voltage
Capacitance
220pF to 10μF
W
L
Main Applications Battery lines and power trains for automobiles
<Dimensions>
23
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Fail
GCJ Series High Dielectric Constant Type Q200 safe
Deflecting
crack
Part Number List
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.6×0.8mm
c
0.9mm
25Vdc
X7R
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10µF
10ꢀ GCJ188R71E822KA01#
10ꢀ GCJ188R71E103KA01#
10ꢀ GCJ188R71E123KA01#
10ꢀ GCJ188R71E153KA01#
10ꢀ GCJ188R71E183KA01#
10ꢀ GCJ188R71E223KA01#
10ꢀ GCJ188R71E273KA01#
10ꢀ GCJ188R71E333KA01#
10ꢀ GCJ188R71E393KA01#
10ꢀ GCJ188R71E473KA01#
10ꢀ GCJ188R71E563KA12#
10ꢀ GCJ188R71E683KA12#
10ꢀ GCJ188R71E823KA12#
10ꢀ GCJ188R71E104KA12#
10ꢀ GCJ188R71E124KA01#
10ꢀ GCJ188R71E154KA01#
10ꢀ GCJ188R71E184KA12#
10ꢀ GCJ188R71E224KA12#
10ꢀ GCJ188R71C103KA01#
10ꢀ GCJ188R71C273KA01#
10ꢀ GCJ188R71C333KA01#
10ꢀ GCJ188R71C393KA01#
10ꢀ GCJ188R71C473KA01#
10ꢀ GCJ188R71C563KA01#
10ꢀ GCJ188R71C683KA01#
10ꢀ GCJ188R71C823KA01#
10ꢀ GCJ188R71C104KA01#
10ꢀ GCJ188R71C124KA01#
10ꢀ GCJ188R71C154KA01#
10ꢀ GCJ188R71C184KA01#
10ꢀ GCJ188R71C224KA01#
10ꢀ GCJ188R71C274KA01#
10ꢀ GCJ188R71C334KA01#
10ꢀ GCJ188R71C394KA12#
10ꢀ GCJ188R71C474KA12#
10ꢀ GCJ188R71A124KA01#
10ꢀ GCJ188R71A154KA01#
10ꢀ GCJ188R71A184KA01#
10ꢀ GCJ188R71A224KA01#
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.9mm 100Vdc X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10µF
10ꢀ GCJ188R72A102KA01#
10ꢀ GCJ188R72A122KA01#
10ꢀ GCJ188R72A152KA01#
10ꢀ GCJ188R72A182KA01#
10ꢀ GCJ188R72A222KA01#
10ꢀ GCJ188R72A272KA01#
10ꢀ GCJ188R72A332KA01#
10ꢀ GCJ188R72A392KA01#
10ꢀ GCJ188R72A472KA01#
10ꢀ GCJ188R72A562KA01#
10ꢀ GCJ188R72A682KA01#
10ꢀ GCJ188R72A822KA01#
10ꢀ GCJ188R72A103KA01#
10ꢀ GCJ188R72A123KA01#
10ꢀ GCJ188R72A153KA01#
10ꢀ GCJ188R72A183KA01#
10ꢀ GCJ188R72A223KA01#
10ꢀ GCJ188R71H102KA01#
10ꢀ GCJ188R71H122KA01#
10ꢀ GCJ188R71H152KA01#
10ꢀ GCJ188R71H182KA01#
10ꢀ GCJ188R71H222KA01#
10ꢀ GCJ188R71H272KA01#
10ꢀ GCJ188R71H332KA01#
10ꢀ GCJ188R71H392KA01#
10ꢀ GCJ188R71H472KA01#
10ꢀ GCJ188R71H562KA01#
10ꢀ GCJ188R71H682KA01#
10ꢀ GCJ188R71H822KA01#
10ꢀ GCJ188R71H103KA01#
10ꢀ GCJ188R71H123KA01#
10ꢀ GCJ188R71H153KA01#
10ꢀ GCJ188R71H183KA01#
10ꢀ GCJ188R71H223KA01#
10ꢀ GCJ188R71H333KA12#
10ꢀ GCJ188R71H393KA12#
10ꢀ GCJ188R71H473KA12#
10ꢀ GCJ188R71H563KA12#
10ꢀ GCJ188R71H683KA12#
10ꢀ GCJ188R71H823KA12#
10ꢀ GCJ188R71H104KA12#
10ꢀ GCJ188R71E102KA01#
10ꢀ GCJ188R71E122KA01#
10ꢀ GCJ188R71E152KA01#
10ꢀ GCJ188R71E182KA01#
10ꢀ GCJ188R71E222KA01#
10ꢀ GCJ188R71E272KA01#
10ꢀ GCJ188R71E332KA01#
10ꢀ GCJ188R71E392KA01#
10ꢀ GCJ188R71E472KA01#
10ꢀ GCJ188R71E562KA01#
10ꢀ GCJ188R71E682KA01#
0.12µF
0.15µF
0.18µF
0.22µF
16Vdc
X7R 10000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10µF
50Vdc
X7R
0.12µF
0.15µF
0.18µF
0.22µF
0.27µF
0.33µF
0.39µF
0.47µF
10Vdc
X7R
0.12µF
0.15µF
0.18µF
0.22µF
2.0×1.25mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
25Vdc
X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
0.7mm 100Vdc X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
10ꢀ GCJ216R72A102KA01#
10ꢀ GCJ216R72A122KA01#
10ꢀ GCJ216R72A152KA01#
10ꢀ GCJ216R72A182KA01#
10ꢀ GCJ216R72A222KA01#
10ꢀ GCJ216R72A272KA01#
10ꢀ GCJ216R72A332KA01#
10ꢀ GCJ216R72A392KA01#
10ꢀ GCJ216R72A472KA01#
10ꢀ GCJ216R72A562KA01#
Part number # indicates the package specification code.
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Fail
GCJ Series High Dielectric Constant Type Q200 safe
Deflecting
crack
Part Number List
→
(
2.0×1.25mm)
c
T
max.
Rated
Voltage Code
TC
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
0.7mm 100Vdc X7R
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
330pF
10ꢀ GCJ216R72A682KA01#
10ꢀ GCJ216R72A822KA01#
10ꢀ GCJ216R72A103KA01#
10ꢀ GCJ216R72A123KA01#
10ꢀ GCJ216R72A153KA01#
10ꢀ GCJ216R72A183KA01#
10ꢀ GCJ216R72A223KA01#
10ꢀ GCJ216R71H331KA01#
10ꢀ GCJ216R71H391KA01#
10ꢀ GCJ216R71H471KA01#
10ꢀ GCJ216R71H561KA01#
10ꢀ GCJ216R71H681KA01#
10ꢀ GCJ216R71H821KA01#
10ꢀ GCJ216R71H102KA01#
10ꢀ GCJ216R71H122KA01#
10ꢀ GCJ216R71H152KA01#
10ꢀ GCJ216R71H182KA01#
10ꢀ GCJ216R71H222KA01#
10ꢀ GCJ216R71H272KA01#
10ꢀ GCJ216R71H332KA01#
10ꢀ GCJ216R71H392KA01#
10ꢀ GCJ216R71H472KA01#
10ꢀ GCJ216R71H562KA01#
10ꢀ GCJ216R71H682KA01#
10ꢀ GCJ216R71H822KA01#
10ꢀ GCJ216R71H103KA01#
10ꢀ GCJ216R71H123KA01#
10ꢀ GCJ216R71H153KA01#
10ꢀ GCJ216R71H183KA01#
10ꢀ GCJ216R71H223KA01#
10ꢀ GCJ216R71E471KA01#
10ꢀ GCJ216R71E561KA01#
10ꢀ GCJ216R71E681KA01#
10ꢀ GCJ216R71E821KA01#
10ꢀ GCJ216R71E102KA01#
10ꢀ GCJ216R71E122KA01#
10ꢀ GCJ216R71E152KA01#
10ꢀ GCJ216R71E182KA01#
10ꢀ GCJ216R71E222KA01#
10ꢀ GCJ216R71E272KA01#
10ꢀ GCJ216R71E332KA01#
10ꢀ GCJ216R71E392KA01#
10ꢀ GCJ216R71E472KA01#
10ꢀ GCJ216R71E562KA01#
10ꢀ GCJ216R71E682KA01#
10ꢀ GCJ216R71E822KA01#
10ꢀ GCJ216R71E103KA01#
10ꢀ GCJ216R71E123KA01#
10ꢀ GCJ219R72A221KA01#
10ꢀ GCJ219R72A271KA01#
10ꢀ GCJ219R72A331KA01#
10ꢀ GCJ219R72A391KA01#
10ꢀ GCJ219R72A471KA01#
10ꢀ GCJ219R72A561KA01#
0.95mm 100Vdc X7R
680pF
820pF
10ꢀ GCJ219R72A681KA01#
10ꢀ GCJ219R72A821KA01#
10ꢀ GCJ219R72A273KA01#
10ꢀ GCJ219R72A333KA01#
10ꢀ GCJ219R72A393KA01#
10ꢀ GCJ219R71H273KA01#
10ꢀ GCJ219R71H333KA01#
10ꢀ GCJ219R71H393KA01#
10ꢀ GCJ219R71H334KA12#
10ꢀ GCJ219R71E153KA01#
10ꢀ GCJ219R71E183KA01#
10ꢀ GCJ219R71E223KA01#
10ꢀ GCJ219R71E334KA01#
10ꢀ GCJ219R71E474KA12#
10ꢀ GCJ219R71C684KA01#
10ꢀ GCJ219R71C824KA01#
10ꢀ GCJ219R71C105KA01#
10ꢀ GCJ21AR72E102KXJ1D
10ꢀ GCJ21AR72E152KXJ1D
10ꢀ GCJ21AR72E222KXJ1D
10ꢀ GCJ21AR72E332KXJ1D
10ꢀ GCJ21AR72E472KXJ1D
10ꢀ GCJ21AR72E682KXJ1D
10ꢀ GCJ21BR72E103KXJ3L
10ꢀ GCJ21BR72E153KXJ3L
10ꢀ GCJ21BR72E223KXJ3L
10ꢀ GCJ21BR72A473KA01#
10ꢀ GCJ21BR72A563KA01#
10ꢀ GCJ21BR72A683KA01#
10ꢀ GCJ21BR72A823KA01#
10ꢀ GCJ21BR72A104KA01#
10ꢀ GCJ21BR71H473KA01#
10ꢀ GCJ21BR71H563KA01#
10ꢀ GCJ21BR71H683KA01#
10ꢀ GCJ21BR71H823KA01#
10ꢀ GCJ21BR71H104KA01#
10ꢀ GCJ21BR71H124KA01#
10ꢀ GCJ21BR71H154KA01#
10ꢀ GCJ21BR71H184KA01#
10ꢀ GCJ21BR71H224KA01#
10ꢀ GCJ21BR71H474KA12#
10ꢀ GCJ21BR71E273KA01#
10ꢀ GCJ21BR71E333KA01#
10ꢀ GCJ21BR71E393KA01#
10ꢀ GCJ21BR71E473KA01#
10ꢀ GCJ21BR71E563KA01#
10ꢀ GCJ21BR71E683KA01#
10ꢀ GCJ21BR71E823KA01#
10ꢀ GCJ21BR71E104KA01#
10ꢀ GCJ21BR71E274KA01#
10ꢀ GCJ21BR71E394KA01#
10ꢀ GCJ21BR71E564KA12#
10ꢀ GCJ21BR71E684KA12#
10ꢀ GCJ21BR71E824KA12#
27000pF
33000pF
39000pF
50Vdc
25Vdc
X7R 27000pF
33000pF
50Vdc
X7R
39000pF
390pF
0.33µF
470pF
X7R 15000pF
18000pF
560pF
680pF
22000pF
820pF
0.33µF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
470pF
0.47µF
16Vdc
X7R
0.68µF
0.82µF
1.0µF
1.0mm 250Vdc X7R
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
1.45mm 250Vdc X7R 10000pF
15000pF
22000pF
100Vdc X7R 47000pF
56000pF
68000pF
82000pF
25Vdc
X7R
0.10µF
560pF
50Vdc
X7R 47000pF
56000pF
68000pF
82000pF
0.10µF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
220pF
0.12µF
0.15µF
0.18µF
0.22µF
0.47µF
25Vdc
X7R 27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10µF
0.95mm 100Vdc X7R
270pF
0.27µF
330pF
0.39µF
390pF
0.56µF
470pF
0.68µF
560pF
0.82µF
Part number # indicates the package specification code.
25
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Fail
GCJ Series High Dielectric Constant Type Q200 safe
Deflecting
crack
Part Number List
→
(
2.0×1.25mm)
c
T
max.
Rated
Voltage Code
TC
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
1.45mm 25Vdc
16Vdc
X7R
X7R
1.0µF
0.27µF
0.33µF
0.39µF
0.47µF
0.56µF
1.0µF
10ꢀ GCJ21BR71E105KA12#
10ꢀ GCJ21BR71C274KA01#
10ꢀ GCJ21BR71C334KA01#
10ꢀ GCJ21BR71C394KA01#
10ꢀ GCJ21BR71C474KA01#
10ꢀ GCJ21BR71C564KA01#
10ꢀ GCJ21BR71C105KA01#
10ꢀ GCJ21BR71C225KA13#
10ꢀ GCJ21BR71A225KA01#
1.35mm 25Vdc
16Vdc
X7R
X7R
3.3µF
1.0µF
10ꢀ GCJ31MR71E335KA12#
10ꢀ GCJ31MR71C105KA01#
10ꢀ GCJ31MR71C155KA01#
10ꢀ GCJ31CR73A682KXJ3L
10ꢀ GCJ31CR73A103KXJ3L
10ꢀ GCJ31CR72J153KXJ3L
10ꢀ GCJ31CR72J223KXJ3L
10ꢀ GCJ31CR72E333KXJ3L
10ꢀ GCJ31CR72E473KXJ3L
10ꢀ GCJ31CR72E104KXJ3L
10ꢀ GCJ31CR71H155KA12#
10ꢀ GCJ31CR71H225KA12#
10ꢀ GCJ31CR71E475KA12#
10ꢀ GCJ31CR71C335KA01#
10ꢀ GCJ31CR71C475KA01#
10ꢀ GCJ31CR71C106KA15#
10ꢀ GCJ31CR71A685KA13#
10ꢀ GCJ31CR71A106KA13#
10ꢀ GCJ31CR70J226KE01#
1.5µF
1.8mm 1000Vdc X7R
6800pF
10000pF
630Vdc X7R 15000pF
22000pF
2.2µF
250Vdc X7R 33000pF
47000pF
10Vdc
X7R
2.2µF
0.10µF
1.9mm
50Vdc
X7R
1.5µF
2.2µF
4.7µF
3.3µF
4.7µF
10µF
6.8µF
10µF
22µF
3.2×1.6mm
c
25Vdc
16Vdc
X7R
X7R
T
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
max.
0.95mm 100Vdc X7R
50Vdc X7R
0.10µF
0.10µF
0.12µF
1000pF
1500pF
2200pF
3300pF
4700pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
10ꢀ GCJ319R72A104KA01#
10ꢀ GCJ319R71H104KA01#
10ꢀ GCJ319R71H124KA01#
10ꢀ GCJ31BR73A102KXJ1L
10ꢀ GCJ31BR73A152KXJ1L
10ꢀ GCJ31BR73A222KXJ1L
10ꢀ GCJ31BR73A332KXJ1L
10ꢀ GCJ31BR73A472KXJ1L
10ꢀ GCJ31BR72J102KXJ1L
10ꢀ GCJ31BR72J152KXJ1L
10ꢀ GCJ31BR72J222KXJ1L
10ꢀ GCJ31BR72J332KXJ1L
10ꢀ GCJ31BR72J472KXJ1L
10ꢀ GCJ31BR72J682KXJ1L
10ꢀ GCJ31BR72J103KXJ1L
10ꢀ GCJ31BR72E153KXJ1L
10ꢀ GCJ31BR72E223KXJ1L
10ꢀ GCJ31BR72E683KXJ1L
10ꢀ GCJ31MR72A154KA01#
10ꢀ GCJ31MR72A184KA01#
10ꢀ GCJ31MR72A224KA01#
10ꢀ GCJ31MR71H154KA01#
10ꢀ GCJ31MR71H184KA01#
10ꢀ GCJ31MR71H224KA01#
10ꢀ GCJ31MR71H274KA01#
10ꢀ GCJ31MR71H334KA01#
10ꢀ GCJ31MR71H394KA01#
10ꢀ GCJ31MR71H474KA01#
10ꢀ GCJ31MR71H564KA12#
10ꢀ GCJ31MR71H684KA12#
10ꢀ GCJ31MR71H824KA12#
10ꢀ GCJ31MR71H105KA12#
10ꢀ GCJ31MR71E104KA01#
10ꢀ GCJ31MR71E124KA01#
10ꢀ GCJ31MR71E154KA01#
10ꢀ GCJ31MR71E184KA01#
10ꢀ GCJ31MR71E224KA01#
10ꢀ GCJ31MR71E105KA01#
10ꢀ GCJ31MR71E155KA12#
10ꢀ GCJ31MR71E225KA12#
10Vdc
6.3Vdc
X7R
X7R
1.25mm 1000Vdc X7R
3.2×2.5mm
c
630Vdc X7R
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.5mm 630Vdc X7R
6800pF
10ꢀ GCJ32QR72J682KXJ1L
10ꢀ GCJ32QR72J103KXJ1L
10ꢀ GCJ32QR72E683KXJ1L
10ꢀ GCJ32QR72E154KXJ1L
10ꢀ GCJ32DR73A153KXJ1L
10ꢀ GCJ32DR73A223KXJ1L
10ꢀ GCJ32DR72J153KXJ1L
10ꢀ GCJ32DR72J223KXJ1L
10ꢀ GCJ32DR72J333KXJ1L
10ꢀ GCJ32DR72J473KXJ1L
10ꢀ GCJ32DR72E104KXJ1L
10ꢀ GCJ32DR72E224KXJ1L
10ꢀ GCJ32DR72A225KA01#
10ꢀ GCJ32ER71H475KA12#
10ꢀ GCJ32ER71E106KA12#
10000pF
250Vdc X7R 68000pF
0.15µF
2.0mm 1000Vdc X7R 15000pF
22000pF
250Vdc X7R 15000pF
22000pF
630Vdc X7R 15000pF
22000pF
68000pF
1.35mm 100Vdc X7R
0.15µF
0.18µF
0.22µF
0.15µF
0.18µF
0.22µF
0.27µF
0.33µF
0.39µF
0.47µF
0.56µF
0.68µF
0.82µF
1.0µF
33000pF
47000pF
250Vdc X7R
0.10µF
0.22µF
2.2µF
4.7µF
10µF
50Vdc
X7R
2.3mm 100Vdc X7R
2.8mm
50Vdc
25Vdc
X7R
X7R
4.5×3.2mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.5mm 630Vdc X7R 68000pF
250Vdc X7R 0.15µF
10ꢀ GCJ43QR72J683KXJ1L
10ꢀ GCJ43QR72E154KXJ1L
10ꢀ GCJ43DR73A333KXJ1L
10ꢀ GCJ43DR73A473KXJ1L
10ꢀ GCJ43DR72J333KXJ1L
10ꢀ GCJ43DR72J473KXJ1L
10ꢀ GCJ43DR72J104KXJ1L
10ꢀ GCJ43DR72E224KXJ1L
10ꢀ GCJ43DR72E334KXJ1L
10ꢀ GCJ43DR72E474KXJ1L
25Vdc
X7R
0.10µF
0.12µF
0.15µF
0.18µF
0.22µF
1.0µF
2.0mm 1000Vdc X7R 33000pF
47000pF
630Vdc X7R 33000pF
47000pF
0.10µF
250Vdc X7R
0.22µF
0.33µF
0.47µF
1.5µF
2.2µF
Part number # indicates the package specification code.
26
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Fail
GCJ Series High Dielectric Constant Type Q200 safe
Deflecting
crack
Part Number List
5.7×5.0mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
2.0mm 1000Vdc X7R 68000pF
0.10µF
10ꢀ GCJ55DR73A683KXJ1L
10ꢀ GCJ55DR73A104KXJ1L
10ꢀ GCJ55DR72J104KXJ1L
10ꢀ GCJ55DR72J154KXJ1L
10ꢀ GCJ55DR72J224KXJ1L
10ꢀ GCJ55DR72E334KXJ1L
10ꢀ GCJ55DR72E474KXJ1L
10ꢀ GCJ55DR72E684KXJ1L
10ꢀ GCJ55DR72E105KXJ1L
630Vdc X7R
0.10µF
0.15µF
0.22µF
0.33µF
0.47µF
0.68µF
1.0µF
250Vdc X7R
Part number # indicates the package specification code.
27
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Specially Designed Product to Reduce Shorts
AEC- Fail
Q200 safe
Deflecting
crack
GCD Series
Prevents momentary dielectric breakdown by a two-element array structure!
Features
1
Prevents momentary dielectric breakdown by a two-element array structure!
This product consists of two elements arranged in one capacitor. It is structured so that even when one element is
shorted, the other capacitor element will not short.
Internal Electrodes
Ceramic
Ni/Sn Plated Layer
Foundation Electrode Layer
two-element Array Arrangement
<Example of Structure>
2
This AEC-Q200 conforming product is ideal for battery lines of automobiles.
Space can be reduced in battery lines where two capacitors are arranged in an array.
Specifications
e
g
e
Size
1.6×0.8mm to 2.0×1.25mm
DC25 to 100V
T
Rated Voltage
Capacitance
1,000pF to 0.1μF
W
L
Main Applications Battery lines and power trains for automobiles
<Dimensions>
28
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Fail
GCD Series High Dielectric Constant Type Q200 safe
Deflecting
crack
Part Number List
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.6×0.8mm
c
0.7mm
50Vdc X7R
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
10ꢀ GCD216R71H392KA01#
10ꢀ GCD216R71H472KA01#
10ꢀ GCD216R71H562KA01#
10ꢀ GCD219R72A682KA01#
10ꢀ GCD21BR72A822KA01#
10ꢀ GCD21BR72A103KA01#
10ꢀ GCD21BR72A123KA01#
10ꢀ GCD21BR71H153KA01#
10ꢀ GCD21BR71H183KA01#
10ꢀ GCD21BR71H223KA01#
10ꢀ GCD21BR71H273KA01#
10ꢀ GCD21BR71H333KA01#
10ꢀ GCD21BR71H393KA01#
10ꢀ GCD21BR71H473KA01#
10ꢀ GCD21BR71H563KA01#
10ꢀ GCD21BR71H683KA01#
10ꢀ GCD21BR71H823KA01#
10ꢀ GCD21BR71H104KA01#
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.9mm 100Vdc X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
10ꢀ GCD188R72A102KA01#
10ꢀ GCD188R72A122KA01#
10ꢀ GCD188R72A152KA01#
10ꢀ GCD188R72A182KA01#
10ꢀ GCD188R72A222KA01#
10ꢀ GCD188R72A272KA01#
10ꢀ GCD188R72A332KA01#
10ꢀ GCD188R72A392KA01#
10ꢀ GCD188R72A472KA01#
10ꢀ GCD188R71H102KA01#
10ꢀ GCD188R71H122KA01#
10ꢀ GCD188R71H152KA01#
10ꢀ GCD188R71H182KA01#
10ꢀ GCD188R71H222KA01#
10ꢀ GCD188R71H272KA01#
10ꢀ GCD188R71H332KA01#
10ꢀ GCD188R71H392KA01#
10ꢀ GCD188R71H472KA01#
10ꢀ GCD188R71H562KA01#
10ꢀ GCD188R71H682KA01#
10ꢀ GCD188R71H822KA01#
10ꢀ GCD188R71H103KA01#
10ꢀ GCD188R71H123KA01#
10ꢀ GCD188R71H153KA01#
10ꢀ GCD188R71H183KA01#
10ꢀ GCD188R71H223KA01#
10ꢀ GCD188R71E273KA01#
10ꢀ GCD188R71E333KA01#
10ꢀ GCD188R71E393KA01#
10ꢀ GCD188R71E473KA01#
0.95mm 100Vdc X7R
1.4mm 100Vdc X7R
50Vdc
X7R 15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10µF
50Vdc
X7R
25Vdc
X7R 27000pF
33000pF
39000pF
47000pF
2.0×1.25mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.7mm 100Vdc X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
10ꢀ GCD216R72A102KA01#
10ꢀ GCD216R72A122KA01#
10ꢀ GCD216R72A152KA01#
10ꢀ GCD216R72A182KA01#
10ꢀ GCD216R72A222KA01#
10ꢀ GCD216R72A272KA01#
10ꢀ GCD216R72A332KA01#
10ꢀ GCD216R72A392KA01#
10ꢀ GCD216R72A472KA01#
10ꢀ GCD216R72A562KA01#
10ꢀ GCD216R71H102KA01#
10ꢀ GCD216R71H122KA01#
10ꢀ GCD216R71H152KA01#
10ꢀ GCD216R71H182KA01#
10ꢀ GCD216R71H222KA01#
10ꢀ GCD216R71H272KA01#
10ꢀ GCD216R71H332KA01#
50Vdc
X7R
Part number # indicates the package specification code.
29
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Specially Designed Product to Reduce Shorts & Resin Electrode Product
AEC- Fail
Q200 safe
Deflecting
crack
GCE Series
Further improved safety performance with a combination of a two-element array
structure & resin external electrodes!
Features
1
Avoid instantaneous dielectric breakdown with the two-element array structure.
This product is configured with two elements arranged in one capacitor. Even if one element short circuits, the other
element in the capacitor does not short.
Internal Electrodes
Resin Electrodes Layer
Ceramic
Ni/Sn Plated Layer
Foundation Electrode Layer
two-element Array Configuration
2
Provides additional safety performance in combination with resin electrodes.
Adopting resin electrodes as the external electrodes will suppress the occurrence of cracking in the capacitor by
mechanical stress.
For Automobiles (GCM Series)
o
Occurrence of cracking on
edge of terminal electrode
Fail Safe Type (GCE Series)
o
Separated foundation
electrode and resin electrode
Conductive resin layer relieves
the mechanical stress of the ceramic
3
Ideal for battery lines of on-board applications.
Space can be reduced for battery lines, when two capacitors are configured in an array.
Specifications
e
g
e
Size
1.6×0.8mm to 2.0×1.25mm
DC50V, 100V
T
Rated Voltage
Capacitance
1000pF to 0.1μF
W
L
Main Applications For automotive, battery lines, power trains
<Dimensions>
30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Fail
GCE Series High Dielectric Constant Type Q200 safe
Deflecting
crack
Part Number List
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.6×0.8mm
c
1.45mm 100Vdc X7R
8200pF
10000pF
12000pF
10ꢀ GCE21BR72A822KA01#
10ꢀ GCE21BR72A103KA01#
10ꢀ GCE21BR72A123KA01#
10ꢀ GCE21BR71H153KA01#
10ꢀ GCE21BR71H183KA01#
10ꢀ GCE21BR71H223KA01#
10ꢀ GCE21BR71H273KA01#
10ꢀ GCE21BR71H333KA01#
10ꢀ GCE21BR71H393KA01#
10ꢀ GCE21BR71H473KA01#
10ꢀ GCE21BR71H563KA01#
10ꢀ GCE21BR71H683KA01#
10ꢀ GCE21BR71H823KA01#
10ꢀ GCE21BR71H104KA01#
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.9mm 100Vdc X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
10ꢀ GCE188R72A102KA01#
10ꢀ GCE188R72A122KA01#
10ꢀ GCE188R72A152KA01#
10ꢀ GCE188R72A182KA01#
10ꢀ GCE188R72A222KA01#
10ꢀ GCE188R72A272KA01#
10ꢀ GCE188R72A332KA01#
10ꢀ GCE188R72A392KA01#
10ꢀ GCE188R72A472KA01#
10ꢀ GCE188R71H102KA01#
10ꢀ GCE188R71H122KA01#
10ꢀ GCE188R71H152KA01#
10ꢀ GCE188R71H182KA01#
10ꢀ GCE188R71H222KA01#
10ꢀ GCE188R71H272KA01#
10ꢀ GCE188R71H332KA01#
10ꢀ GCE188R71H392KA01#
10ꢀ GCE188R71H472KA01#
10ꢀ GCE188R71H562KA01#
10ꢀ GCE188R71H682KA01#
10ꢀ GCE188R71H822KA01#
10ꢀ GCE188R71H103KA01#
10ꢀ GCE188R71H123KA01#
10ꢀ GCE188R71H153KA01#
10ꢀ GCE188R71H183KA01#
10ꢀ GCE188R71H223KA01#
50Vdc
X7R 15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.10µF
50Vdc
X7R
2.0×1.25mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.7mm 100Vdc X7R
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
10ꢀ GCE216R72A102KA01#
10ꢀ GCE216R72A122KA01#
10ꢀ GCE216R72A152KA01#
10ꢀ GCE216R72A182KA01#
10ꢀ GCE216R72A222KA01#
10ꢀ GCE216R72A272KA01#
10ꢀ GCE216R72A332KA01#
10ꢀ GCE216R72A392KA01#
10ꢀ GCE216R72A472KA01#
10ꢀ GCE216R72A562KA01#
10ꢀ GCE216R71H102KA01#
10ꢀ GCE216R71H122KA01#
10ꢀ GCE216R71H152KA01#
10ꢀ GCE216R71H182KA01#
10ꢀ GCE216R71H222KA01#
10ꢀ GCE216R71H272KA01#
10ꢀ GCE216R71H332KA01#
10ꢀ GCE216R71H392KA01#
10ꢀ GCE216R71H472KA01#
10ꢀ GCE216R71H562KA01#
10ꢀ GCE219R72A682KA01#
50Vdc
X7R
0.95mm 100Vdc X7R
Part number # indicates the package specification code.
31
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Conductivity Adhesive Compatible Type
AEC-
Q200
Deflecting Soldering
crack
crack
GCG Series
Improved mechanical and thermal strength by adopting AgPd external electrodes,
which can be mounted with a conductive adhesive!
Features
1
Conductive adhesives can be used.
This capacitor can be mounted with a conductive adhesive* in power trains and safety devices of automobiles.
External Electrodes
Internal Electrodes
Ceramic
Cu+AgPd
Conductive Adhesive
2
3
Adopted AgPd external electrodes.
Adopted AgPd, which is excellent in bonding strength with a conductive adhesive.
Compatible up to 150 °C.
This capacitor lineup with X8L and X8R characteristics can be used in high-temperature environments, such as in
ABS and transmission control.
* The conductive adhesive buffers the expansion and contraction difference between the substrate and parts caused by
temperature changes, and has a high temperature cycle life span.
Specifications
e
g
e
Size
1.0×0.5mm to 3.2×2.5mm
DC16V to 50V
T
Rated Voltage
Capacitance
10pF to 10μF
W
L
Main Applications For automotive, power trains, sensors
<Dimensions>
32
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCG Series Temperature Compensating Type Q200
Deflecting Soldering
crack
crack
Part Number List
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.6×0.8mm
c
0.7mm
50Vdc
X8G
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCG2165G1H332JA01#
GCG2165G1H392JA01#
GCG2165G1H472JA01#
GCG2195G1H562JA01#
GCG2195G1H682JA01#
GCG2195G1H822JA01#
GCG2195G1H103JA01#
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.9mm
50Vdc
X8G
10pF
12pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCG1885G1H100JA01#
GCG1885G1H120JA01#
GCG1885G1H150JA01#
GCG1885G1H180JA01#
GCG1885G1H220JA01#
GCG1885G1H270JA01#
GCG1885G1H330JA01#
GCG1885G1H390JA01#
GCG1885G1H470JA01#
GCG1885G1H560JA01#
GCG1885G1H680JA01#
GCG1885G1H820JA01#
GCG1885G1H101JA01#
GCG1885G1H121JA01#
GCG1885G1H151JA01#
GCG1885G1H181JA01#
GCG1885G1H221JA01#
GCG1885G1H271JA01#
GCG1885G1H331JA01#
GCG1885G1H391JA01#
GCG1885G1H471JA01#
GCG1885G1H561JA01#
GCG1885G1H681JA01#
GCG1885G1H821JA01#
GCG1885G1H102JA01#
GCG1885G1H122JA01#
GCG1885G1H152JA01#
GCG1885G1H182JA01#
GCG1885G1H222JA01#
0.95mm 50Vdc
X8G
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2.0×1.25mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.7mm
50Vdc X8G
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GCG2165G1H101JA01#
GCG2165G1H121JA01#
GCG2165G1H151JA01#
GCG2165G1H181JA01#
GCG2165G1H221JA01#
GCG2165G1H271JA01#
GCG2165G1H331JA01#
GCG2165G1H391JA01#
GCG2165G1H471JA01#
GCG2165G1H561JA01#
GCG2165G1H681JA01#
GCG2165G1H821JA01#
GCG2165G1H102JA01#
GCG2165G1H122JA01#
GCG2165G1H152JA01#
GCG2165G1H182JA01#
GCG2165G1H222JA01#
GCG2165G1H272JA01#
Part number # indicates the package specification code.
33
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.±7,20±3
AEC-
GCG Series High Dielectric Constant Type Q200
Deflecting Soldering
crack
crack
Part Number List
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.0×0.5mm
c
0.9mm
50Vdc
X8L
470pF
560pF
±±0ꢀ GCG188L81H471KA01#
±±0ꢀ GCG188L81H561KA01#
±±0ꢀ GCG188L81H681KA01#
±±0ꢀ GCG188L81H821KA01#
±±0ꢀ GCG188L81H102KA01#
±±0ꢀ GCG188L81H122KA01#
±±0ꢀ GCG188L81H152KA01#
±±0ꢀ GCG188L81H182KA01#
±±0ꢀ GCG188L81H222KA01#
±±0ꢀ GCG188L81H272KA01#
±±0ꢀ GCG188L81H332KA01#
±±0ꢀ GCG188L81H392KA01#
±±0ꢀ GCG188L81H472KA01#
±±0ꢀ GCG188L81H562KA01#
±±0ꢀ GCG188L81H682KA01#
±±0ꢀ GCG188L81H822KA01#
±±0ꢀ GCG188L81H103KA01#
±±0ꢀ GCG188L81H123KA01#
±±0ꢀ GCG188L81H153KA01#
±±0ꢀ GCG188L81H183KA01#
±±0ꢀ GCG188L81H223KA01#
±±0ꢀ GCG188R71H273KA12#
±±0ꢀ GCG188R71H333KA12#
±±0ꢀ GCG188R71H393KA12#
±±0ꢀ GCG188R71H473KA12#
±±0ꢀ GCG188R71H563KA12#
±±0ꢀ GCG188R71H683KA12#
±±0ꢀ GCG188R71H823KA12#
±±0ꢀ GCG188R71E124KA12#
±±0ꢀ GCG188R71E154KA12#
±±0ꢀ GCG188R71E184KA12#
±±0ꢀ GCG188R71E224KA12#
±±0ꢀ GCG188L81C154KA01#
±±0ꢀ GCG188L81C224KA01#
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.55mm 50Vdc
X7R
220pF
270pF
±±0ꢀ GCG155R71H221KA01#
±±0ꢀ GCG155R71H271KA01#
±±0ꢀ GCG155R71H331KA01#
±±0ꢀ GCG155R71H391KA01#
±±0ꢀ GCG155R71H471KA01#
±±0ꢀ GCG155R71H561KA01#
±±0ꢀ GCG155R71H681KA01#
±±0ꢀ GCG155R71H821KA01#
±±0ꢀ GCG155R71H102KA01#
±±0ꢀ GCG155R71H122KA01#
±±0ꢀ GCG155R71H152KA01#
±±0ꢀ GCG155R71H182KA01#
±±0ꢀ GCG155R71H222KA01#
±±0ꢀ GCG155R71H272KA01#
±±0ꢀ GCG155R71H332KA01#
±±0ꢀ GCG155R71H392KA01#
±±0ꢀ GCG155R71H472KA01#
±±0ꢀ GCG155L81E562KA01#
±±0ꢀ GCG155L81E682KA01#
±±0ꢀ GCG155L81E822KA01#
±±0ꢀ GCG155L81E103KA01#
±±0ꢀ GCG155R71E562KA01#
±±0ꢀ GCG155R71E682KA01#
±±0ꢀ GCG155R71E822KA01#
±±0ꢀ GCG155R71E103KA01#
±±0ꢀ GCG155L81C153KA01#
±±0ꢀ GCG155L81C183KA01#
±±0ꢀ GCG155L81C223KA01#
±±0ꢀ GCG155L81C273KA01#
±±0ꢀ GCG155L81C333KA01#
±±0ꢀ GCG155L81C393KA01#
±±0ꢀ GCG155L81C473KA01#
±±0ꢀ GCG155R71C153KA01#
±±0ꢀ GCG155R71C183KA01#
±±0ꢀ GCG155R71C223KA01#
±±0ꢀ GCG155R71C273KA01#
±±0ꢀ GCG155R71C333KA01#
±±0ꢀ GCG155R71C393KA01#
±±0ꢀ GCG155R71C473KA01#
±±0ꢀ GCG155R71C563KA01#
±±0ꢀ GCG155R71C683KA01#
±±0ꢀ GCG155R71C823KA01#
±±0ꢀ GCG155R71C104KA01#
680pF
820pF
330pF
±000pF
±200pF
±500pF
±800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
±0000pF
±2000pF
±5000pF
±8000pF
22000pF
390pF
470pF
560pF
680pF
820pF
±000pF
±200pF
±500pF
±800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
±0000pF
5600pF
6800pF
8200pF
±0000pF
25Vdc
X8L
X7R
X7R 27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
±6Vdc
X8L ±5000pF
±8000pF
22000pF
27000pF
33000pF
39000pF
47000pF
X7R ±5000pF
±8000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.±0µF
82000pF
25Vdc
±6Vdc
X7R
X8L
0.±2µF
0.±5µF
0.±8µF
0.22µF
0.±5µF
0.22µF
2.0×1.25mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
±.45mm 50Vdc
X8L 27000pF
33000pF
±±0ꢀ GCG21BL81H273KA01#
±±0ꢀ GCG21BL81H333KA01#
±±0ꢀ GCG21BL81H393KA01#
±±0ꢀ GCG21BL81H473KA01#
±±0ꢀ GCG21BL81H104KA03#
±±0ꢀ GCG21BR71H154KA01#
±±0ꢀ GCG21BR71H184KA01#
±±0ꢀ GCG21BR71H224KA01#
±±0ꢀ GCG21BL81E104KA01#
±±0ꢀ GCG21BL81E334KA01#
±±0ꢀ GCG21BR71E274KA01#
±±0ꢀ GCG21BR71E334KA01#
±±0ꢀ GCG21BR71E394KA01#
±±0ꢀ GCG21BR71E474KA01#
±±0ꢀ GCG21BR71E564KA01#
39000pF
47000pF
0.±0µF
X7R
0.±5µF
0.±8µF
0.22µF
0.±0µF
0.33µF
0.27µF
0.33µF
0.39µF
0.47µF
0.56µF
1.6×0.8mm
c
25Vdc
X8L
X7R
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
0.9mm
50Vdc X8L
220pF
270pF
330pF
390pF
±±0ꢀ GCG188L81H221KA01#
±±0ꢀ GCG188L81H271KA01#
±±0ꢀ GCG188L81H331KA01#
±±0ꢀ GCG188L81H391KA01#
Part number # indicates the package specification code.
34
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC-
GCG Series High Dielectric Constant Type Q200
Deflecting Soldering
crack
crack
Part Number List
→
(
2.0×1.25mm)
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.45mm 25Vdc
16Vdc
X7R
X8L
0.68µF
0.82µF
1.0µF
10ꢀ GCG21BR71E684KA01#
10ꢀ GCG21BR71E824KA01#
10ꢀ GCG21BR71E105KA12#
10ꢀ GCG21BL81C334KA01#
10ꢀ GCG21BL81C394KA01#
10ꢀ GCG21BL81C474KA01#
10ꢀ GCG21BL81C564KA01#
10ꢀ GCG21BL81C684KA01#
10ꢀ GCG21BL81C824KA01#
0.33µF
0.39µF
0.47µF
0.56µF
0.68µF
0.82µF
3.2×1.6mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.35mm 25Vdc
X7R
1.0µF
1.2µF
1.5µF
2.2µF
1.0µF
1.5µF
3.3µF
3.9µF
4.7µF
3.3µF
4.7µF
10ꢀ GCG31MR71E105KA01#
10ꢀ GCG31MR71E125KA01#
10ꢀ GCG31MR71E155KA01#
10ꢀ GCG31MR71E225KA12#
10ꢀ GCG31ML81C105KA01#
10ꢀ GCG31ML81C155KA01#
10ꢀ GCG31CR71E335KA01#
10ꢀ GCG31CR71E395KA01#
10ꢀ GCG31CR71E475KA01#
10ꢀ GCG31CL81C335KA01#
10ꢀ GCG31CL81C475KA01#
16Vdc
X8L
X7R
1.9mm
25Vdc
16Vdc
X8L
3.2×2.5mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
2.3mm
2.8mm
25Vdc
25Vdc
X7R
X7R
3.3µF
4.7µF
10µF
10ꢀ GCG32DR71E335KA01#
10ꢀ GCG32ER71E475KA01#
10ꢀ GCG32ER71E106KA12#
Part number # indicates the package specification code.
35
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
High Effective Capacitance & High Allowable Ripple Current
AEC- Anti-
Q200 noise
GC3 Series
This is a high ripple resistance product for automobiles, excellent in DC voltage
characteristics.
Features
1
When a DC voltage is applied, a capacitance higher than conventional products
(X7R characteristics) can be acquired.
When DC600V is applied, about twice the capacitance can be secured.
20
0
-20
-40
-60
New Material GC3
5750 (in mm)/2220 (in inch)/0.1μF/630V
-80
Conventional Material GCM
5750 (in mm)/2220 (in inch)/0.1μF/630V
-100
0
100
200
300
400
500
600
700
DC Voltage (V)
<Comparison between Capacitance - DC Voltage Characteristics>
2
Improved ripple resistance performance compared to conventional products (X7R characteristics).
In the case of a product with a capacitance of 0.1μF, when the exothermic temperature reaches 20°C at frequency
f=300kHz, the amount of resistance of a product with conventional material is 1.8Arms; however, the new material
is 2.3 Arms.
5750 (in mm)/2220 (in inch)/0.1μF/630V
100
30kHz
30kHz
1.8Arms 2.3Arms
20°C
10
300kHz
300kHz
100kHz
New Material GC3
Conventional Material GCM
100kHz
1
1
0
0.5
1.5
2
2.5
3
Current (Ar.m.s.)
<Exothermic Temperature Comparison>
3
This product has a noise reduction effect.
Since dielectric materials that enable a reduction of noise are used, this product is more effective for reducing noise
compared to the GCM series for automobiles.
Specifications
e
g
e
Size
2.0×1.25mm to 5.7×5.0mm
DC250 to 630V
T
Rated Voltage
Capacitance
0.01μF to 1.0μF
W
L
For PFC (Power Factor Correction) circuits of power supplies, EMI suppression,
and smoothing circuits of automobiles
Main Applications
<Dimensions>
36
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Anti-
GC3 Series High Dielectric Constant Type Q200 noise Part Number List
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
2.0×1.25mm
c
2.7mm 630Vdc X7T
450Vdc X7T
0.27µF
0.56µF
1.0µF
10ꢀ GC355XD72J274KX05L
10ꢀ GC355XD72W564KX05L
10ꢀ GC355XD72E105KX05L
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.0mm 250Vdc X7T 10000pF
15000pF
10ꢀ GC321AD72E103KX01D
10ꢀ GC321AD72E153KX01D
10ꢀ GC321BD72E223KX03L
250Vdc X7T
1.45mm 250Vdc X7T 22000pF
3.2×1.6mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.0mm 450Vdc X7T 10000pF
15000pF
10ꢀ GC331AD72W103KX01D
10ꢀ GC331AD72W153KX01D
10ꢀ GC331AD72E333KX01D
10ꢀ GC331BD72J103KX01L
10ꢀ GC331BD72W223KX01L
10ꢀ GC331BD72W333KX01L
10ꢀ GC331BD72E473KX01L
10ꢀ GC331CD72J153KX03L
10ꢀ GC331CD72W473KX03L
10ꢀ GC331CD72E683KX03L
250Vdc X7T 33000pF
1.25mm 630Vdc X7T 10000pF
450Vdc X7T 22000pF
33000pF
250Vdc X7T 47000pF
1.8mm 630Vdc X7T 15000pF
450Vdc X7T 47000pF
250Vdc X7T 68000pF
3.2×2.5mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.5mm 630Vdc X7T 22000pF
250Vdc X7T 0.10µF
10ꢀ GC332QD72J223KX01L
10ꢀ GC332QD72E104KX01L
10ꢀ GC332DD72J333KX01L
10ꢀ GC332DD72J473KX01L
10ꢀ GC332DD72W683KX01L
10ꢀ GC332DD72W104KX01L
10ꢀ GC332DD72E154KX01L
2.0mm 630Vdc X7T 33000pF
47000pF
450Vdc X7T 68000pF
0.10µF
250Vdc X7T
0.15µF
4.5×3.2mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
1.5mm 250Vdc X7T
0.22µF
10ꢀ GC343QD72E224KX01L
10ꢀ GC343DD72J683KX01L
10ꢀ GC343DD72W154KX01L
10ꢀ GC343DD72E334KX01L
2.0mm 630Vdc X7T 68000pF
450Vdc X7T
250Vdc X7T
0.15µF
0.33µF
5.7×5.0mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
2.0mm 630Vdc X7T
450Vdc X7T
0.10µF
0.15µF
0.22µF
0.33µF
0.47µF
0.47µF
0.68µF
0.22µF
10ꢀ GC355DD72J104KX01L
10ꢀ GC355DD72J154KX01L
10ꢀ GC355DD72W224KX01L
10ꢀ GC355DD72W334KX01L
10ꢀ GC355DD72W474KX01L
10ꢀ GC355DD72E474KX01L
10ꢀ GC355DD72E684KX01L
10ꢀ GC355XD72J224KX05L
250Vdc X7T
2.7mm 630Vdc X7T
Part number # indicates the package specification code.
37
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Metal Terminal Type
AEC- Anti-
Q200 noise
Deflecting Soldering
crack
crack
KCM Series
By bonding metal terminals to the external electrodes of the chip, the problem of
how to design a capacitor to enable it to be mounted on a large MLCC has been
solved!
Features
1
Bond the metal terminals to the external electrodes of the chip.
The stress on the chip is reduced due to the elastic behavior of the metal terminals.
Internal Electrode
Ceramic
Lead-free High
Temperature
Solder
Noise
Board Bending Cracks
Solder Cracks
Metal Terminal
Noise due to cracks or vibration of the capacitor caused by
mechanical stress applied to the board was a design issue.
Stress is reduced due to the elastic behavior of the metal terminals!
2
Noise, board deflection cracks, and solder cracks are greatly reduced.
No breakage occurs even when the board deflection is 6mm.
Solder cracks were not found even after 2000 heat stress cycles.
Comparison of Noise Reduction Effect
Stress caused by board deflection is reduced.
80
Does not
100
80
60
40
20
0
break even
at 6 mm!
Metal Terminal
(2220/630V/220nF)
60
40
20
0
Approx. 30dB reduction!
Chip Capacitor
(2220/630V/220nF)
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Chip Capacitor
With Metal Terminals
Deflection Amount (mm)
Evaluation Items: 2220 size/DC630V/220nF
Test Conditions: 50V, AC10Vp-p/3kHz
Sample Board: Glass-epoxy Board (T: 1.6mm)
Number of samples: 3
Distance between microphone and board: 3mm
Note: Results obtained using Murata’s evaluation board
Solder cracks due to heat stress are reduced.
Chip Size
Individual Chip (2220 size)
Metal Terminal (2220 size)
1000 cycles
Solder cracks
2000 cycles
Compared to an individual chip, the addition
of metal terminals results in excellent solder
cracking resistance.
Solder cracks
Test Conditions: -55 to +125°C, 5 minutes (liquid phase)
Board used: Glass-epoxy Board (FR-4)
38
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
3
Chip Stacking
A large capacitance can be realized by stacking two capacitors on top of each other.
Specifications
Size
6.1×5.3mm
T
Rated Voltage
Capacitance
DC25V to 100V
4.7μF to 47μF
W
e
L
For drive control of engine ECU, etc.
For other drive system control and safety equipment
Main Applications
<Dimensions>
39
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Anti-
KCM Series High Dielectric Constant Type Q200 noise
Deflecting Soldering
crack
crack
Part Number List
6.1×5.3mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
3.0mm 100Vdc X7R
4.7µF
4.7µF
4.7µF
10µF
15µF
6.8µF
10µF
10µF
17µF
22µF
10µF
22µF
33µF
15µF
22µF
22µF
33µF
47µF
10ꢀ KCM55LR72A475KH01K
10ꢀ KCM55LR71J475KH01K
10ꢀ KCM55LR71H475KH01K
10ꢀ KCM55LR7YA106KH01K
10ꢀ KCM55LR71E156KH01K
10ꢀ KCM55QR72A685KH01K
10ꢀ KCM55QR71J106KH01K
10ꢀ KCM55QR71H106KH01K
10ꢀ KCM55QR7YA176KH01K
10ꢀ KCM55QR71E226KH01K
20ꢀ KCM55TR72A106MH01K
20ꢀ KCM55TR7YA226MH01K
20ꢀ KCM55TR71E336MH01K
20ꢀ KCM55WR72A156MH01K
20ꢀ KCM55WR71J226MH01K
20ꢀ KCM55WR71H226MH01K
20ꢀ KCM55WR7YA336MH01K
20ꢀ KCM55WR71E476MH01K
63Vdc
50Vdc
35Vdc
25Vdc
X7R
X7R
X7R
X7R
3.9mm 100Vdc X7R
63Vdc
50Vdc
35Vdc
25Vdc
X7R
X7R
X7R
X7R
5.0mm 100Vdc X7R
35Vdc
25Vdc
X7R
X7R
6.7mm 100Vdc X7R
63Vdc
50Vdc
35Vdc
25Vdc
X7R
X7R
X7R
X7R
Part number # indicates the package specification code.
40
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Metal Terminal Type/High Effective Capacitance & High Allowable Ripple Current
AEC- Anti-
Deflecting Soldering
crack
crack
Q200 noise
KC3 Series
By bonding metal terminals to the external electrodes of the chip, the problem of
how to design a capacitor to enable it to be mounted on a large MLCC has been
solved!
Features
1
Bond the metal terminals to the external electrodes of the chip.
The stress on the chip is reduced due to the elastic behavior of the metal terminals.
Internal Electrode
Ceramic
Lead-free High
Temperature
Solder
Noise
Board Bending Cracks
Solder Cracks
Metal Terminal
Noise due to cracks or vibration of the capacitor caused by
mechanical stress applied to the board was a design issue.
Stress is reduced due to the elastic behavior of the metal terminals!
2
Noise, board deflection cracks, and solder cracks are greatly reduced.
No breakage occurs even when the board deflection is 6mm.
Solder cracks were not found even after 2000 heat stress cycles.
Comparison of Noise Reduction Effect
Stress caused by board deflection is reduced.
80
Does not
100
80
60
40
20
0
break even
at 6 mm!
Metal Terminal
(2220/630V/220nF)
60
40
20
0
Approx. 30dB reduction!
Chip Capacitor
(2220/630V/220nF)
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Chip Capacitor
With Metal Terminals
Deflection Amount (mm)
Evaluation Items: 2220 size/DC630V/220nF
Test Conditions: 50V, AC10Vp-p/3kHz
Sample Board: Glass-epoxy Board (T: 1.6mm)
Number of samples: 3
Distance between microphone and board: 3mm
Note: Results obtained using Murata’s evaluation board
Solder cracks due to heat stress are reduced.
Chip Size
Individual Chip (2220 size)
Metal Terminal (2220 size)
1000 cycles
Solder cracks
2000 cycles
Compared to an individual chip, the addition
of metal terminals results in excellent solder
cracking resistance.
Solder cracks
Test Conditions: -55 to +125°C, 5 minutes (liquid phase)
Board used: Glass-epoxy Board (FR-4)
41
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
3
Uses material of low dielectric constant.
Compared to a conventional capacitor (X7R characteristics), this series has higher effective capacitance and better
anti-ripple performance.
20
New Material
(250V/1μF/X7T)
Conventional Material
0
(250V/1μF/X7R)
-20
-40
-60
-80
-100
0
50
100
150
200
250
DC Voltage (V)
4
Chip Stacking
A large capacitance can be realized by stacking two capacitors on top of each other.
Specifications
Size
6.1×5.3mm
T
Rated Voltage
Capacitance
DC250V to 630V
0.1μF to 2.2μF
W
e
L
For drive control of engine ECU, etc.
For other drive system control and safety equipment
Main Applications
<Dimensions>
42
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
AEC- Anti-
KC3 Series High Dielectric Constant Type Q200 noise
Deflecting Soldering
crack
crack
Part Number List
6.1×5.3mm
c
T
max.
Rated
Voltage Code
TC
Cap.
Tol.
Part Number
3.0mm 630Vdc X7T
450Vdc X7T
0.10µF
0.15µF
0.22µF
0.47µF
0.47µF
0.22µF
0.27µF
0.56µF
1.0µF
10ꢀ KC355LD72J104KH01K
10ꢀ KC355LD72J154KH01K
10ꢀ KC355LD72W224KH01K
10ꢀ KC355LD72W474KH01K
10ꢀ KC355LD72E474KH01K
10ꢀ KC355QD72J224KH01K
10ꢀ KC355QD72J274KH01K
10ꢀ KC355QD72W564KH01K
10ꢀ KC355QD72E105KH01K
20ꢀ KC355TD72W105MH01K
20ꢀ KC355WD72J474MH01K
20ꢀ KC355WD72J564MH01K
20ꢀ KC355WD72W125MH01K
20ꢀ KC355WD72E225MH01K
250Vdc X7T
3.9mm 630Vdc X7T
450Vdc X7T
250Vdc X7T
5.0mm 450Vdc X7T
6.7mm 630Vdc X7T
1.0µF
0.47µF
0.56µF
1.2µF
450Vdc X7T
250Vdc X7T
2.2µF
Part number # indicates the package specification code.
43
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
For Automotive
!Caution/Notice
Notice
!Caution
..........................
......................................................................
c Storage and Operation Conditions
45
c Rating
57
57
57
57
.......................................
...................................
1. Operating Temperature
......................................................................
c Rating
1. Temperature Dependent Characteristics
..............................
45
45
46
46
2. Atmosphere Surroundings
3. Piezo-electric Phenomenon
.............
.................................
2. Measurement of Capacitance
...................................................
..........................................
3. Applied Voltage
4. Type of Applied Voltage and
c Soldering and Mounting
57
57
57
58
58
59
59
59
59
60
.........................................................
1. PCB Design
....................................
Self-heating Temperature
47
48
49
49
.................................
1. Notice for Pattern Forms
.......
5. DC Voltage and AC Voltage Characteristics
.............................................
...........................................
2. Land Dimensions
..............................................
6. Capacitance Aging
7. Vibration and Shock
2. Adhesive Application
............................................
..................................................
3. Adhesive Curing
4. Flux Application
...................................................
..........................................
c Soldering and Mounting
49
49
50
.....................................................
5. Flow Soldering
................................................
1. Mounting Position
...............................................................
6. Washing
................................................................
................................
2. Information before Mounting
7. Coating
3. Maintenance of the Mounting
(pick and place) Machine
.....................................
50
51
52
53
54
54
54
54
.......................................................................
.....................................................
..............................................
c Other
60
60
4-1. Reflow Soldering
..................................................
.......................
1. Transportation
4-2. Flow Soldering
2. Characteristics Evaluation
............................................
4-3. Correction with a Soldering Iron
in the Actual System
60
...........................
4-4. Leaded Component Insertion
...............................................................
5. Washing
...............
6. Electrical Test on Printed Circuit Board
............................
7. Printed Circuit Board Cropping
8. Selection of Conductive Adhesive,
Mounting Process, and Bonding Strength
...........
56
56
56
.......................................
9. Moisture Proof Process
.........................................................
10. Application
.......................................................................
c Other
1. Under Operation of Equipment
....................................................................
56
56
56
............................
2. Other
44
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
c Storage and Operation Conditions
1. The performance of chip monolithic ceramic capacitors
may be affected by the storage conditions.
1-1. Store the capacitors in the following conditions:
Room Temperature of +5°C to +40°C and
a Relative Humidity of 20% to 70%.
(1) Sunlight, dust, rapid temperature changes,
corrosive gas atmosphere, or high temperature
and humidity conditions during storage may affect
solderability and packaging performance.
Please use product within six months of receipt.
(2) Please confirm solderability before using after six
months. Store the capacitors without opening the
original bag. Even if the storage period is short, do
not exceed the specified atmospheric conditions.
1-2. Corrosive gas can react with the termination
(external) electrodes or lead wires of capacitors, and
result in poor solderability. Do not store the capacitors
in an atmosphere consisting of corrosive gas (e.g.,
hydrogen sulfide, sulfur dioxide, chlorine, ammonia
gas, etc.).
1-3. Due to moisture condensation caused by rapid
humidity changes, or the photochemical change
caused by direct sunlight on the terminal electrodes
and/or the resin/epoxy coatings, the solderability and
electrical performance may deteriorate. Do not store
capacitors under direct sunlight or in high humidity
conditions.
<Applicable to GCG Series>
1-4. After unpacking, immediately reseal, or store in a
desiccator containing a desiccant.
c Rating
1. Temperature Dependent Characteristics
1. The electrical characteristics of a capacitor can change
[Typical Temperature Characteristics R7(X7R)]
Sample: 0.1μF, Rated Voltage 50VDC
with temperature.
1-1. For capacitors having larger temperature
dependency, the capacitance may change with
temperature changes.
20
10
The following actions are recommended in order to
ensure suitable capacitance values.
(1) Select a suitable capacitance for the operating
temperature range.
0
-10
-20
-30
-40
-50
(2) The capacitance may change within the rated
temperature.
When you use a high dielectric constant type
capacitor in a circuit that needs a tight (narrow)
capacitance tolerance (e.g., a time-constant
circuit), please carefully consider the temperature
characteristics, and carefully confirm the various
characteristics in actual use conditions and the
actual system.
-75
-50
-25
0
25
50
75
100
125
Temperature (°C)
Continued on the following page.
45
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
2. Measurement of Capacitance
1. Measure capacitance with the voltage and frequency
specified in the product specifications.
1-1. The output voltage of the measuring equipment may
decrease occasionally when capacitance is high.
Please confirm whether a prescribed measured
voltage is impressed to the capacitor.
1-2. The capacitance values of high dielectric constant
type capacitors change depending on the AC voltage
applied. Please consider the AC voltage
characteristics when selecting a capacitor to be used
in an AC circuit.
3. Applied Voltage
1. Do not apply a voltage to the capacitor that exceeds the
rated voltage as called out in the specifications.
1-1. Applied voltage between the terminals of a capacitor
shall be less than or equal to the rated voltage.
(1) When AC voltage is superimposed on DC voltage,
the zero-to-peak voltage shall not exceed the
rated DC voltage.
When AC voltage or pulse voltage is applied, the
peak-to-peak voltage shall not exceed the rated
DC voltage.
(2) Abnormal voltages (surge voltage, static
electricity, pulse voltage, etc.) shall not exceed
the rated DC voltage.
Typical Voltage Applied to the DC Capacitor
DC Voltage
DC Voltage+AC
AC Voltage
Pulse Voltage
0
E
E
E
E
0
0
0
(E: Maximum possible applied voltage.)
1-2. Influence of over voltage
Over voltage that is applied to the capacitor may
result in an electrical short circuit caused by the
breakdown of the internal dielectric layers.
The time duration until breakdown depends on the
applied voltage and the ambient temperature.
2. Use a safety standard certified capacitor in a power
supply input circuit (AC filter), as it is also necessary to
consider the withstand voltage and impulse withstand
voltage defined for each device.
Continued on the following page.
46
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
4. Type of Applied Voltage and Self-heating Temperature
1. Confirm the operating conditions to make sure that no large
[Example of Temperature Rise (Heat Generation)
in Chip Monolithic Ceramic Capacitors in Contrast
to Ripple Current]
current is flowing into the capacitor due to the continuous
application of an AC voltage or pulse voltage.
When a DC rated voltage product is used in an AC voltage
circuit or a pulse voltage circuit, the AC current or pulse
current will flow into the capacitor; therefore check the
self-heating condition.
Sample: R characteristics 10μF, Rated voltage: DC10V
Ripple Current
100
Please confirm the surface temperature of the capacitor so
that the temperature remains within the upper limits of the
operating temperature, including the rise in temperature due
to self-heating. When the capacitor is used with a
high-frequency voltage or pulse voltage, heat may be
generated by dielectric loss.
10
100kHz
500kHz
1MHz
<Applicable to Rated Voltage of less than 100VDC>
1-1. The load should be contained to the level such that
when measuring at atmospheric temperature of 25°C,
the product's self-heating remains below 20°C and the
surface temperature of the capacitor in the actual circuit
remains within the maximum operating temperature.
<Applicable to Temperature Characteristic X7R, X7T
beyond Rated Voltage of 250VDC>
1
0
1
2
3
4
5
6
Current (Ar.m.s.)
The temperature of the surface
of capacitor: 125°C or less (including self-heating)
U2J char., Rated Voltage: DC250V
1000
1-2. The load should be contained so that the self-heating of
the capacitor body remains below 20°C, when
measuring at an ambient temperature of 25°C. In
addition, use a K thermocouple of ø0.1mm with less
heat capacity when measuring, and measure in a
condition where there is no effect from the radiant heat
of other components or air flow caused by convection.
Excessive generation of heat may cause deterioration
of the characteristics and reliability of the capacitor.
(Absolutely do not perform measurements while the
cooling fan is operating, as an accurate measurement
may not be performed.)
to 2,200pF
4,700pF
(250)
100
10,000pF
10
1
10
100
1000
Frequency [kHz]
U2J char., Rated Voltage: DC630V
1000
to 680pF
<Applicable to Temperature Characteristic U2J beyond
Rated Voltage of 250VDC>
1,000pF
2,200pF
4,700pF
10,000pF
22,000pF
47,000pF
1-3. Since the self-heating is low in the low loss series, the
allowable power becomes extremely high compared to
the common X7R characteristics.
100
However, when a load with self-heating of 20°C is
applied at the rated voltage, the allowable power may
be exceeded. When the capacitor is used in a
high-frequency voltage circuit of 1kHz or more, the
frequency of the applied voltage should be less than
500kHz sine wave (less than 100kHz for a product with
rated voltage of DC3.15kV), to limit the voltage load so
that the load remains within the derating shown in the
following figure. In the case of non-sine wave,
high-frequency components exceeding the fundamental
frequency may be included. In such a case, please
contact Murata. The excessive generation of heat may
cause deterioration of the characteristics and reliability
of the capacitor.
10
1
10
100
1000
Frequency [kHz]
U2J char., Rated Voltage: DC1kV
10000
to 470pF
1,000pF
2,200pF
4,700pF
10,000pF
1000
100
10
1
10
100
1000
Frequency [kHz]
(Absolutely do not perform measurements while the
cooling fan is operating, as an accurate measurement
may not be performed.)
Sine-wave frequency VS allowable voltage
Continued on the following page.
47
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
<Design Tool>
· Simsurfing
By using this tool, the preferred products* can be checked
Simsurfing is a web application to display the
characteristics charts and download the characteristics
data of our products. The frequency characteristics,
temperature characteristics, bias characteristics etc. can
be checked.
by specifications, such as the power, voltage, and
fundamental frequency of the voltage waveform to be
input into the capacitor.
*Supported Series
(Address: http://www.murata.com/simsurfing/)
· Medium Voltage Ceramic Capacitor Selection Tool
The selection tool "Murata Medium Voltage Capacitors
Selection Tool by Voltage Form" is installed in the above
SimSurfing, where the usability of the preferred medium
voltage ceramic capacitors can be determined according
to the application including automobiles.
Temperature characteristic U2J of GCM/DC250V or more
5. DC Voltage and AC Voltage Characteristics
1. The capacitance value of a high dielectric constant type
[DC Voltage Characteristics]
capacitor changes depending on the DC voltage applied.
Please consider the DC voltage characteristics when a
capacitor is selected for use in a DC circuit.
1-1. The capacitance of ceramic capacitors may change
sharply depending on the applied voltage (see
figure).
Sample: R Characteristics 0.1μF, Rated Voltage 50VDC
20
0
-20
-40
-60
-80
-100
Please confirm the following in order to secure the
capacitance.
(1) Determine whether the capacitance change
caused by the applied voltage is within the
allowed range.
0
10
20
30
40
50
(2) In the DC voltage characteristics, the rate of
capacitance change becomes larger as voltage
increases, even if the applied voltage is below
the rated voltage. When a high dielectric constant
type capacitor is used in a circuit that requires a
tight (narrow) capacitance tolerance (e.g., a time
constant circuit), please carefully consider the
voltage characteristics, and confirm the various
characteristics in actual operating conditions in an
actual system.
DC Voltage (V)
2. The capacitance values of high dielectric constant type
capacitors changes depending on the AC voltage applied.
Please consider the AC voltage characteristics when
selecting a capacitor to be used in an AC circuit.
[AC Voltage Characteristics]
Sample: X7R Characteristics 10μF, Rated Voltage 6.3VDC
30
20
10
0
-10
-20
-30
-40
-50
-60
0
0.5
1
1.5
2
AC Voltage (Vr.m.s.)
Continued on the following page.
48
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
6. Capacitance Aging
1. The high dielectric constant type capacitors have the
[Example of Change Over Time (Aging Characteristics)]
characteristic in which the capacitance value decreases
with the passage of time.
20
10
0
When you use high dielectric constant type capacitors in
a circuit that needs a tight (narrow) capacitance tolerance
(e.g., a time-constant circuit), please carefully consider
the characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics. In
addition, check capacitors using your actual appliances at
the intended environment and operating conditions.
-10
-20
C0G
X7R
-30
-40
10
100
1000
10000
Time (h)
7. Vibration and Shock
1. Please confirm the kind of vibration and/or shock, its
condition, and any generation of resonance.
Please mount the capacitor so as not to generate
resonance, and do not allow any impact on the terminals.
2. Mechanical shock due to being dropped may cause
damage or a crack in the dielectric material of the
capacitor.
Do not use a dropped capacitor because the quality and
reliability may be deteriorated.
Crack
Floor
3. When printed circuit boards are piled up or handled, the
corner of another printed circuit board should not be
allowed to hit the capacitor, in order to avoid a crack or
other damage to the capacitor.
Mounting printed circuit board
Crack
c Soldering and Mounting
1. Mounting Position
1. Confirm the best mounting position and direction that
minimizes the stress imposed on the capacitor during
flexing or bending the printed circuit board.
1-1. Choose a mounting position that minimizes the
stress imposed on the chip during flexing or bending
of the board.
[Component Direction]
Locate chip
horizontal to the
direction in
which stress
acts.
[Chip Mounting Close to Board Separation Point]
C
Stress is easily
imposed in the order of
B, D<C<A.
Perforation
B
D
A
Slit
Continued on the following page.
49
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
2. Information before Mounting
1. Do not re-use capacitors that were removed from the
equipment.
2. Confirm capacitance characteristics under actual applied
voltage.
3. Confirm the mechanical stress under actual process and
equipment use.
4. Confirm the rated capacitance, rated voltage and other
electrical characteristics before assembly.
5. Prior to use, confirm the solder ability of capacitors that
were in long-term storage.
6. Prior to measuring capacitance, carry out a heat
treatment for capacitors that were in long-term storage.
7. The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
3. Maintenance of the Mounting (pick and place) Machine
1. Make sure that the following excessive forces are not
applied to the capacitors.
[Incorrect]
[Correct]
Suction Nozzle
1-1. In mounting the capacitors on the printed circuit
board, any bending force against them shall be kept
to a minimum to prevent them from any bending
damage or cracking. Please take into account the
following precautions and recommendations for use
in your process.
Deflection
Board
Board Guide
(1) Adjust the lowest position of the pickup nozzle so
as not to bend the printed circuit board.
(2) Adjust the nozzle pressure within a static load of
1N to 3N during mounting.
Support Pin
2. Dirt particles and dust accumulated between the suction
nozzle and the cylinder inner wall prevent the nozzle from
moving smoothly. This imposes greater force upon the
chip during mounting, causing cracked chips. Also, the
locating claw, when worn out, imposes uneven forces on
the chip when positioning, causing cracked chips. The
suction nozzle and the locating claw must be maintained,
checked, and replaced periodically.
Continued on the following page.
50
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
4-1. Reflow Soldering
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both the components and the PCB.
Preheating conditions are shown in table 1. It is required to
keep the temperature differential between the solder and
the components surface (ΔT) as small as possible.
2. Solder ability of tin plating termination chips might be
deteriorated when a low temperature soldering profile
where the peak solder temperature is below the melting
point of tin is used. Please confirm the solder ability of tin
plated termination chips before use.
[Standard Conditions for Reflow Soldering]
Reflow
Temperature (°C)
Peak Temperature
220°C (200°C)
Soldering
Gradual
Cooling
ΔT
190°C (170°C)
170°C (150°C)
150°C (130°C)
Preheating
Time
60-120 seconds 30-60 seconds
Temperature
Incase of Lead Free Solder
(
): In case of Pb-Sn Solder
3. When components are immersed in solvent after mounting,
be sure to maintain the temperature difference (ΔT)
between the component and the solvent within the range
shown in table 1.
Vapor Reflow
Temperature (°C)
Peak Temperature
Soldering
Gradual
Cooling
ΔT
Table 1
190°C (170°C)
170°C (150°C)
150°C (130°C)
Part Number
Temperature Differential
GC3/GCD/GCE/GCJ/GCM Series
03/15/18/21/31 sizes
ΔTV190°C
Preheating
GCJ/GCM Series 32/43/55 sizes
KC3/KCM Series 55 size
ΔTV130°C
Time
20 seconds max.
60-120 seconds
Recommended Conditions
[Allowable Reflow Soldering Temperature and Time]
Pb-Sn Solder
Lead Free
Solder
280
270
260
250
240
Reflow
Vapor Reflow
Peak Temperature 230 to 250°C
230 to 240°C
240 to 260°C
Saturated vapor
of inactive solvent
Atmosphere
Air
Air or N2
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
230
220
0
30
60
90
120
Soldering Time (sec.)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
4. Optimum Solder Amount for Reflow Soldering
4-1. Overly thick application of solder paste results in a
excessive solder fillet height.
This makes the chip more susceptible to mechanical
and thermal stress on the board and may cause the
chips to crack.
∗
0.2mm min.
4-2. Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in
chips breaking loose from the PCB.
∗
GRM03: 1/3 of Chip Thickness min.
in section
4-3. Make sure the solder has been applied smoothly to
the end surface to a height of 0.2mm* min.
Inverting the PCB
Make sure not to impose any abnormal mechanical shocks
to the PCB.
Continued on the following page.
51
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
4-2. Flow Soldering
1. Do not apply flow soldering to chips not listed in table 2.
[Standard Conditions for Flow Soldering]
Temperature (D)
Table 2
Soldering
Soldering
Peak
Part Number
Temperature Differential
Gradual
Cooling
Temperature
GC3/GCD/GCM Series 18/21/31 sizes
ΔT
(Except for characteristics of X8L, X8G)
Preheating
Peak
Temperature
ΔTV150°C
GCJ Series Rated Voltage 250VDC
or more 18/21/31 sizes
Preheating
2. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both of the components and the PCB board.
Preheating conditions are shown in table 2. It is required
to keep the temperature differential between the solder
and the components surface (ΔT) as low as possible.
3. Excessively long soldering time or high soldering
temperature can result in leaching of the outer electrodes,
causing poor adhesion or a reduction in capacitance
value due to loss of contact between the electrodes and
end termination.
Time
5 seconds max.
30-90 seconds
[Allowable Flow Soldering Temperature and Time]
280
270
260
250
240
230
220
0
10
20
30
40
Soldering Time (sec.)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
4. When components are immersed in solvent after
mounting, be sure to maintain the temperature differential
(ΔT) between the component and solvent within the range
shown in the table 2.
Recommended Conditions
Pb-Sn Solder
90 to 110°C
240 to 250°C
Air
Lead Free Solder
100 to 120°C
250 to 260°C
N2
Preheating Peak Temperature
Soldering Peak Temperature
Atmosphere
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
5. Optimum Solder Amount for Flow Soldering
5-1. The top of the solder fillet should be lower than the
thickness of the components. If the solder amount is
excessive, the risk of cracking is higher during board
bending or any other stressful condition.
Up to Chip Thickness
Adhesive
in section
Continued on the following page.
52
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
4-3. Correction with a Soldering Iron
1. When sudden heat is applied to the components when
using a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change can cause deformations inside the
components. In order to prevent mechanical damage to
the components, preheating is required for both the
components and the PCB board. Preheating conditions
(the "Temperature of the Soldering Iron Tip," "Preheating
Temperature," and "Temperature Differential" between
the iron tip and the components and the PCB), should be
within the conditions of table 3. It is required to keep the
temperature differential between the soldering iron and
the component surfaces (ΔT) as low as possible.
2. After soldering, do not allow the component/PCB to cool
down rapidly.
Table 3
Temperature
of Soldering
Iron Tip
Temperature
Differential
(ΔT)
Preheating
Temperature
Part Number
Atmosphere
GC3/GCD/GCE/
GCJ/GCM Series
03/15/18/21/31 sizes
350°C max. 150°C min. ΔTV190°C
280°C max. 150°C min. ΔTV130°C
Air
Air
GCJ/GCM Series
32/43/55 sizes
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
3. The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, resulting in a reduction in the
adhesive strength of the terminations.
4. Optimum solder amount when re-working with a soldering
iron
4-1. In the case of sizes smaller than 0603, (GC3/GCD/
GCE/GCJ/GCM Series, 03/15/18 sizes), the top of
the solder fillet should be lower than 2 3 of the
/
Solder Amount
thickness of the component or 0.5mm, whichever is
smaller. In the case of 0805 and larger sizes, (GC3/
GCD/GCE/GCJ/GCM Series, 21/31/32/43/55 sizes),
in section
the top of the solder fillet should be lower than 2 3 of
/
the thickness of the component. If the solder amount
is excessive, the risk of cracking is higher during
board bending or under any other stressful condition.
4-2. A soldering iron with a tip of ø3mm or smaller should
be used. It is also necessary to keep the soldering
iron from touching the components during the re-work.
4-3. Solder wire with ø0.5mm or smaller is required for
soldering.
<Applicable to KC3/KCM Series>
5. For the shape of the soldering iron tip, refer to the figure
on the right.
17
26
R0.5
Regarding the type of solder, use a wire diameter of
ø0.5mm or less (rosin core wire solder).
(in mm)
Tip of Soldering Iron
Tip temperature: 350°C or less/
5 sec. or less/60W or less
How to Apply the Soldering Iron
Apply the tip of the soldering iron against the lower end of
the metal terminal.
Copper Land
1) In order to prevent cracking caused by sudden heating of
the ceramic device, do not touch the ceramic base directly.
2) In order to prevent deviations and dislocating of the chip,
do not touch the junction of the chip and the metal
terminal, and the metal portion on the outside directly.
Apply the tip of the soldering iron only
on the terminal portion, without touching
the body of the chip.
Wire Solder
Appropriate Amount of Solder
The amount of solder for corrections by soldering iron,
should be lower than the height of the lower side of the chip.
Cross Section
Continued on the following page.
53
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
4-4. Leaded Component Insertion
1. If the PCB is flexed when leaded components (such as
transformers and ICs) are being mounted, chips may
crack and solder joints may break.
Before mounting leaded components, support the PCB
using backup pins or special jigs to prevent warping.
5. Washing
Excessive ultrasonic oscillation during cleaning can cause
the PCBs to resonate, resulting in cracked chips or broken
solder joints. Take note not to vibrate PCBs.
6. Electrical Test on Printed Circuit Board
1. Confirm position of the support pin or specific jig, when
inspecting the electrical performance of a capacitor after
mounting on the printed circuit board.
[Not Recommended]
Peeling
1-1. Avoid bending the printed circuit board by the
pressure of a test pin, etc.
Test-pin
The thrusting force of the test probe can flex the PCB,
resulting in cracked chips or open solder joints.
Provide support pins on the back side of the PCB to
prevent warping or flexing.
[Recommended]
Support Pin
1-2. Avoid vibration of the board by shock when a test pin
contacts a printed circuit board.
Test-pin
7. Printed Circuit Board Cropping
1. After mounting a capacitor on a printed circuit board, do
not apply any stress to the capacitor that is caused by
bending or twisting the board.
[Bending]
[Twisting]
1-1. In cropping the board, the stress as shown at right
may cause the capacitor to crack.
Avoid this type of stress to a capacitor.
Continued on the following page.
54
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
2. Check the cropping method for the printed circuit board
in advance.
2-1. Printed circuit board cropping shall be carried out by
using a jig or an apparatus to prevent the mechanical
stress that can occur to the board.
(1) Example of a suitable jig
Recommended example: the board should be
pushed as close to the cropping jig as possible
and from the back side of the board in order to
minimize the compressive stress applied to the
capacitor.
[Outline of Jig]
Printed Circuit Board
V-groove
Not recommended example: when the board is
pushed at a point far from the cropping jig and
from the front side of board as below, the
capacitor may form a crack caused by the tensile
stress applied.
Board Cropping Jig
Recommended
Not recommended
Direction of Load
Direction of Load
Load Point
Printed Circuit Board
Components
Components
Load Point
Printed Circuit Board
(2) Example of a suitable machine
An outline of a printed circuit board cropping
machine is shown as follows. Along the lines with
the V-grooves on the printed circuit board, the top
and bottom blades are aligned to one another
when cropping the board.
[Outline of Machine]
Top Blade
The misalignment of the position between top and
bottom blades may cause the capacitor to crack.
Printed Circuit Board
Top Blade
[Principle of Operation]
[Cross-section Diagram]
Bottom Blade
V-groove
Printed Circuit Board
V-groove
Not Recommended
Recommended
Top-bottom Misalignment
Left-right Misalignment
Front-rear Misalignment
Top Blade
Top Blade
Top Blade
Top Blade
Bottom Blade
Bottom Blade
Bottom Blade
Bottom Blade
Continued on the following page.
55
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Caution
!
Continued from the preceding page.
<Applicable to GCG Series>
8. Selection of Conductive Adhesive, Mounting
Process, and Bonding Strength
The acquired bonding strength may change greatly
depending on the conductive adhesive to be used.
Be sure to confirm if the desired performance can be
acquired in the assumed mounting process with the
conductive adhesive to be used.
9. Moisture Proof Process
In order to prevent the occurrence of migration, perform a
moisture proof process, such as applying a resin coating or
enclosing with a dry inert gas.
10. Application
This product is for conductive adhesive mounting. When
performing solder mounting, contact Murata in advance.
c Other
1. Under Operation of Equipment
2-2. Disposal of Waste
1-1. Do not touch a capacitor directly with bare hands
during operation in order to avoid the danger of an
electric shock.
When capacitors are disposed of, they must be
burned or buried by an industrial waste vendor with
the appropriate licenses.
1-2. Do not allow the terminals of a capacitor to come in
contact with any conductive objects (short-circuit).
Do not expose a capacitor to a conductive liquid,
including any acid or alkali solutions.
1-3. Confirm the environment in which the equipment will
operate is under the specified conditions.
Do not use the equipment under the following
environments.
2-3. Circuit Design
(1) Addition of Fail Safe Function
Be sure to add a fail safe function to the finished
product to prevent secondary accidents, in the
case where an abnormality or discrepancy occurs
in the product.
(2) Capacitors used to prevent electromagnetic
interference in the primary AC side circuit, or as a
connection/insulation, must be a safety standard
certified product, or satisfy the contents stipulated
in the Electrical Appliance and Material Safety
Law.
(1) Being spattered with water or oil.
(2) Being exposed to direct sunlight.
(3) Being exposed to ozone, ultraviolet rays, or
radiation.
(4) Being exposed to toxic gas (e.g., hydrogen sulfide,
sulfur dioxide, chlorine, ammonia gas, etc.)
(5) Any vibrations or mechanical shocks exceeding the
specified limits.
(3) The GC3, GCD, GCE, GCG, GCJ, GCM, KC3,
and KCM series are not safety standard certified
products.
2-4. Remarks
(6) Moisture condensing environments.
1-4. Use damp proof countermeasures if using under any
conditions that can cause condensation.
2. Other
Failure to follow the cautions may result, worst case,
in a short circuit and smoking when the product is
used.
The above notices are for standard applications and
conditions. Contact us when the products are used in
special mounting conditions.
2-1. In an Emergency
(1) If the equipment should generate smoke, fire, or
smell, immediately turn off or unplug the equipment.
If the equipment is not turned off or unplugged, the
hazards may be worsened by supplying continuous
power.
Select optimum conditions for operation as they
determine the reliability of the product after assembly.
The data herein are given in typical values, not
guaranteed ratings.
(2) In this type of situation, do not allow face and
hands to come in contact with the capacitor or
burns may be caused by the capacitor's high
temperature.
56
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Notice
c Rating
1. Operating Temperature
operating environments may deteriorate due to
the corrosion of the terminations and the
1. The operating temperature limit depends on the capacitor.
1-1. Do not apply temperatures exceeding the upper
operating temperature.
penetration of moisture into the capacitor.
1-2. The same phenomenon as the above may occur
when the electrodes or terminals of the capacitor
are subject to moisture condensation.
It is necessary to select a capacitor with a suitable
rated temperature that will cover the operating
temperature range.
1-3. The deterioration of characteristics and insulation
resistance due to the oxidization or corrosion of
terminal electrodes may result in breakdown when
the capacitor is exposed to corrosive or volatile
gases or solvents for long periods of time.
It is also necessary to consider the temperature
distribution in equipment and the seasonal
temperature variable factor.
1-2. Consider the self-heating factor of the capacitor.
The surface temperature of the capacitor shall be
the upper operating temperature or less when
including the self-heating factors.
3. Piezo-electric Phenomenon
1. When using high dielectric constant type capacitors in
AC or pulse circuits, the capacitor itself vibrates at
specific frequencies and noise may be generated.
Moreover, when the mechanical vibration or shock is
added to the capacitor, noise may occur.
2. Atmosphere Surroundings (gaseous and liquid)
1. Restriction on the operating environment of capacitors.
1-1. Capacitors, when used in the above, unsuitable,
c Soldering and Mounting
1. PCB Design
1. Notice for Pattern Forms
1-2. There is a possibility of chip cracking caused by PCB
expansion/contraction with heat, because stress on a
chip is different depending on PCB material and
structure. Especially metal PCB such as alumina has
a greater risk of chip crack because of the large
difference in thermal expansion coefficient. In case of
a chip below 0402 size, there is also the same
possibility of cracking with a single-layered glass
epoxy board.
1-1. Unlike leaded components, chip components are
susceptible to flexing stresses since they are
mounted directly on the substrate.
They are also more sensitive to mechanical and
thermal stresses than leaded components.
Excess solder fillet height can multiply these stresses
and cause chip cracking. When designing substrates,
take land patterns and dimensions into consideration
to eliminate the possibility of excess solder fillet
height.
Pattern Forms
Prohibited
Correct
Chassis
Solder Resist
Solder (ground)
Placing Close to Chassis
Electrode Pattern
Lead Wire
Solder Resist
Placing
of Chip Components
and Leaded Components
Soldering Iron
Lead Wire
Placing
of Leaded Components
after Chip Component
Solder Resist
Solder Resist
Lateral Mounting
Continued on the following page.
57
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Notice
Continued from the preceding page.
2. Land Dimensions
Land
2-1. Chip capacitors can be cracked due to the stress of
PCB bending, etc. if the land area is larger than
needed and has an excess amount of solder.
Please refer to the land dimensions in table 1 for flow
soldering, table 2 for reflow soldering.
Please confirm the suitable land dimension by
evaluating of the actual SET / PCB.
Chip Capacitor
c
Solder Resist
b
a
Table 1 Flow Soldering Method
Dimensions
Chip (LgW)
a
b
c
Part Number
GC3/GCD/GCM/GCJ18
1.6g0.8
0.6 to 1.0
1.0 to 1.2
2.2 to 2.6
0.8 to 0.9
0.9 to 1.0
1.0 to 1.1
0.6 to 0.8
0.8 to 1.1
1.0 to 1.4
(Rated Voltage: above 250VDC (for GCJ18 alone))
GC3/GCD/GCM/GCJ21
2.0g1.25
(Rated Voltage: above 250VDC (for GCJ21 alone))
GC3/GCD/GCM/GCJ31
3.2g1.6
(Rated Voltage: above 250VDC (for GCJ31 alone))
(in mm)
Flow soldering can only be used for products with a chip size of 3.2x1.6mm or less.
Table 2 Reflow Soldering Method
Dimensions
Chip (LgW)
a
b
c
Part Number
GC3/GCD/GCE/GCJ/GCM03
GC3/GCD/GCE/GCJ/GCM15
GC3/GCD/GCE/GCJ/GCM18
GC3/GCD/GCE/GCJ/GCM21
GC3/GCD/GCE/GCJ/GCM31
GC3/GCD/GCE/GCJ/GCM32
GC3/GCD/GCE/GCJ/GCM43
GC3/GCD/GCE/GCJ/GCM55
0.6g0.3
1.0g0.5
1.6g0.8
2.0g1.25
3.2g1.6
3.2g2.5
4.5g3.2
5.7g5.0
0.2 to 0.3
0.3 to 0.5
0.6 to 0.8
1.0 to 1.2
2.2 to 2.4
2.0 to 2.4
3.0 to 3.5
4.0 to 4.6
0.2 to 0.35
0.35 to 0.45
0.6 to 0.7
0.6 to 0.7
0.8 to 0.9
1.0 to 1.2
1.2 to 1.4
1.4 to 1.6
0.2 to 0.4
0.4 to 0.6
0.6 to 0.8
0.8 to 1.1
1.0 to 1.4
1.8 to 2.3
2.3 to 3.0
3.5 to 4.8
(in mm)
<Applicable to Part Number KC3/KCM>
Dimensions
Part Number
Chip (LgW)
5.7g5.0
a
b
c
KC3/KCM55
2.6
2.7
5.6
(in mm)
2. Adhesive Application
1. Thin or insufficient adhesive can cause the chips to
loosen or become disconnected during flow soldering.
The amount of adhesive must be more than dimension c,
shown in the drawing at right, to obtain the correct
bonding strength.
a=20 to 70μm
b=30 to 35μm
c=50 to 105μm
Chip Capacitor
a
c
The chip's electrode thickness and land thickness must
also be taken into consideration.
b
Adhesive
Land
Board
2. Low viscosity adhesive can cause chips to slip after
mounting. The adhesive must have a viscosity of
5000Pa s s (500ps) min. (at 25°C).
3. Adhesive Coverage
Size (LgW)
1.6g0.8
Adhesive Coverage*
0.05mg min.
2.0g1.25
3.2g1.6
0.1mg min.
0.15mg min.
*Nominal Value
Continued on the following page.
58
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Notice
Continued from the preceding page.
3. Adhesive Curing
1. Insufficient curing of the adhesive can cause chips to
disconnect during flow soldering and causes deterioration
in the insulation resistance between the outer electrodes
due to moisture absorption.
Control curing temperature and time in order to prevent
insufficient hardening.
4. Flux Application
1. An excessive amount of flux generates a large quantity of
flux gas, which can cause a deterioration of solder ability,
so apply flux thinly and evenly throughout. (A foaming
system is generally used for flow soldering.)
2. Flux containing too high a percentage of halide may
cause corrosion of the outer electrodes unless there is
sufficient cleaning. Use flux with a halide content of 0.1%
max.
3. Do not use strong acidic flux.
4. Do not use water-soluble flux.*
(*Water-soluble flux can be defined as non-rosin type flux
including wash-type flux and non-wash-type flux.)
5. Flow Soldering
o Set temperature and time to ensure that leaching of the
outer electrode does not exceed 25% of the chip end
area as a single chip (full length of the edge A-B-C-D
shown at right) and 25% of the length A-B shown as
mounted on substrate.
[As a Single Chip]
A
B
D
Outer Electrode
C
[As Mounted on Substrate]
B
A
6. Washing
1. Please evaluate the capacitor using actual cleaning
equipment and conditions to confirm the quality, and
select the solvent for cleaning.
3. Select the proper cleaning conditions.
3-1. Improper cleaning conditions (excessive or
insufficient) may result in deterioration of the
performance of the capacitors.
2. Unsuitable cleaning solvent may leave residual flux or
other foreign substances, causing deterioration of
electrical characteristics and the reliability of the
capacitors.
59
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Notice
Continued from the preceding page.
7. Coating
ꢍꢊ ! CRACK MAY BE CAUSED IN THE CAPACITOR DUE TO THE STRESS
of the thermal contraction of the resin during curing
process.
ꢅꢊ 3ELECT A RESIN THAT IS LESS HYGROSCOPICꢊ
Using hygroscopic resins under high humidity conditions
may cause the deterioration of the insulation resistance of
a capacitor.
The stress is affected by the amount of resin and curing
contraction.
An epoxy resin can be used as a less hygroscopic resin.
3ELECT A RESIN WITH LOW CURING CONTRACTIONꢊ
The difference in the thermal expansion coefficient
BETWEEN A COATING RESIN OR A MOLDING RESIN AND THE
capacitor may cause the destruction and deterioration of
THE CAPACITOR SUCH AS A CRACK OR PEELINGꢎ AND LEAD TO THE
deterioration of insulation resistance or dielectric
BREAKDOWNꢊ
3ELECT A RESIN FOR WHICH THE THERMAL EXPANSION COEFFICIENT
is as close to that of the capacitor as possible.
A silicone resin can be used as an under-coating to buffer
against the stress.
c Other
1. Transportation
ꢅꢊ #HARACTERISTICS %VALUATION IN THE !CTUAL 3YSTEM
ꢍꢊ %VALUATE THE CAPACITOR IN THE ACTUAL SYSTEMꢎ TO CONFIRM
THAT THERE IS NO PROBLEM WITH THE PERFORMANCE AND
specification values in a finished product before using.
ꢅꢊ 3INCE A VOLTAGE DEPENDENCY AND TEMPERATURE
dependency exists in the capacitance of high dielectric
type ceramic capacitors, the capacitance may change
depending on the operating conditions in the actual
system. Therefore, be sure to evaluate the various
CHARACTERISTICSꢎ SUCH AS THE LEAKAGE CURRENT AND NOISE
ABSORPTIVITYꢎ WHICH WILL AFFECT THE CAPACITANCE VALUE OF
the capacitor.
1. The performance of a capacitor may be affected by the
conditions during transportation.
1-1. The capacitors shall be protected against
excessive temperature, humidity, and mechanical
force during transportation.
(1) Climatic condition
s LOW AIR TEMPERATUREꢀ ꢁꢂꢃ #
s CHANGE OF TEMPERATURE AIRꢄAIRꢀ ꢁꢅꢆ #ꢄꢇꢅꢆ #
s LOW AIR PRESSUREꢀ ꢈꢃ K0A
s CHANGE OF AIR PRESSUREꢀ ꢉ K0AꢄMINꢊ
ꢋꢅꢌ -ECHANICAL CONDITION
4RANSPORTATION SHALL BE DONE IN SUCH A WAY THAT
the boxes are not deformed and forces are not
DIRECTLY PASSED ON TO THE INNER PACKAGINGꢊ
ꢍꢁꢅꢊ $O NOT APPLY EXCESSIVE VIBRATIONꢎ SHOCKꢎ OR
pressure to the capacitor.
ꢈꢊ )N ADDITIONꢎ VOLTAGES EXCEEDING THE PREDETERMINED
surge may be applied to the capacitor by the
INDUCTANCE IN THE ACTUAL SYSTEMꢊ %VALUATE THE SURGE
resistance in the actual system as required.
ꢋꢍꢌ 7HEN EXCESSIVE MECHANICAL SHOCK OR PRESSURE
IS APPLIED TO A CAPACITORꢎ CHIPPING OR CRACKING
may occur in the ceramic body of the capacitor.
ꢋꢅꢌ 7HEN THE SHARP EDGE OF AN AIR DRIVERꢎ A
SOLDERING IRONꢎ TWEEZERSꢎ A CHASSISꢎ ETCꢊ
impacts strongly on the surface of the capacitor,
THE CAPACITOR MAY CRACK AND SHORTꢁCIRCUITꢊ
ꢍꢁꢈꢊ $O NOT USE A CAPACITOR TO WHICH EXCESSIVE SHOCK
WAS APPLIED BY DROPPINGꢎ ETCꢊ
A capacitor dropped accidentally during
processing may be damaged.
60
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
MEMO
61
• Please read rating and !
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
C03E.pdf
May.17,2013
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
62
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
63
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
!Note
C03E.pdf
May.17,2013
C03E.pdf
May.17,2013
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Convenient Search
The type of searches has been increased to respond to various ways of searching.
The products you are searching for can easily be found from about 40,000 part numbers!
The frequency of revisions and discontinuance has been increased to provide the latest information at all times!
Capacitor Website Introduction
The website and search engine of ceramic capacitors has been drastically renewed.
s
( )
Reference drawings Specifications and Test Methods can be downloaded in PDF format.
Substantial
Technical
Information
s
(
Graphs of the electrical characteristic data Capacitance - Temperature characteristics / DC bias characteristics /
)
AC voltage characteristics / Frequency characteristics can be displayed.
capacitor murata
http://www.murata.com/products/capacitor/
s
Reliability test data can be downloaded.
Examples of Problem Solving
Contents for Solving customers' problems. Introducing the recommended
Industry Pickup
Advantages of Murata Capacitors
3
1
2
We explain the unique benefits of
Murata capacitors, our matchless
quality, track record in the market,
supply systems and development
capability.
s
(
)
Examples of Replacement Video
series and the latest information
on Murata for each industry.
s
s
Proposal for Cost Reductions
Examples of Noise
s
Automobile
Smart Phones etc.
s
(
) etc.
Countermeasures Video
You can contact us and download catalogs from here.
Search by features
Search in the lineups
Products can be searched
by entire product lineup.
Search by specifications
Products can be searched by capacitance,
rated voltage or temperature characteristics.
1
4
2
5
3
Products can be searched by problems,
shapes or mounting methods.
2
1
1
5
3
4
Cross reference search
Equivalent products of Murata can be
searched by competitors' part numbers.
Search by part number
Products can be searched
by Murata's part numbers.
SimSurfing
2
This is a web application to display characteristics charts of
Murata products, and download the characteristics data.
s
S parameter
s
s
(
)
SPICE Model
Netlist
Data Libraries
(
)
r
for Agilent ADS, for AWR Microwave Office
(
)
Frequently Asked Questions FAQ
This is a collection of questions asked by customers.
The contents of problems can easily be searched by keywords with
this search function.
3
Characteristics Data
(
Dimensions / Capacitance - Temperature Characteristics /
DC Bias Characteristics / AC Voltage / Frequency Characteristics /
Heat Generation by Ripple Currents, etc.
)
Reliability Test Data
Initial Characteristics / Board Bending Resistance /
Humidity Resistance / High Temperature Load / Solderability, etc.
Safety Certificates by Series
List of ISO14001 Certified Plants
64
65
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C03E.pdf
May.17,2013
Cat. No. C03E-6
相关型号：
©2020 ICPDF网 联系我们和版权申明