GRM0225C1C6R7WD05 [MURATA]
Chip Monolithic Ceramic Capacitors; 片状独石陶瓷电容器型号: | GRM0225C1C6R7WD05 |
厂家: | muRata |
描述: | Chip Monolithic Ceramic Capacitors |
文件: | 总237页 (文件大小:4776K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
C02E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Explanation of Symbols in This Catalog
Lx W dimension: products of 0.6x0.3 mm or less
Voltage and temperature derating recommended product
This product is suitable when a voltage continuously applied
to a capacitor in an operating circuit, is used below (derated)
the rated voltage of the capacitor.
This model guarantees the test conditions in the endurance test,
at a rated voltage x 100% at the maximum operating temperature.
A reliability assurance level equivalent to a common product
can be secured, by using this product within the voltage and
temperature derated conditions recommended in the figure below.
Ultra-
Derating
compact
Low dissipation for high frequency
HiQ
By devising ceramic materials and electrode materials,
low dissipation is achieved in frequency bands of VHF,
UHF and microwave or beyond.
Low inductance
Low
ESL
This capacitor is designed so that
the parasitic inductance component (ESL)
that the capacitor has on the high frequency
side becomes lower.
s
Recommended Conditions of the Derating Operating Voltage and Temperature
120
100
125°C Type
105°C Type
Product suitable for acoustic noise reduction and low distortion
Anti-
80
noise This product suppresses acoustic noise,
which occurs when a ceramic capacitor is used,
by devising the materials and configuration.
85°C Type
60
40
Product resistant to deflection cracking
This capacitor is designed to prevent failures as much
as possible by short mode caused by cracking
when there is board deflection.
Deflecting
crack
20
0
0
25
50
75
100
125
150
Product Temperature (°C)
Product with solder cracking suppression
This capacitor is configured with metal terminals
and leads connected to the chip.
Soldering
crack
The metal terminals and leads relieve the stress from expansion
and contraction of the solder, to suppress solder cracking.
s
All the products in this catalog comply with EU RoHS.
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
EU RoHS
Compliant
s
For General Purpose GRM Series Capacitance Table
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Contents
(Medium Voltage)
Cap. Table
For General Purpose
GRM (250Vdc min.)/GRJ/GR3 Series
Temperature Compensating Type
GRM Series (250Vdc min.)
High Dielectric Constant Type
GRM Series (250Vdc min.)
p136 separate volume
p143 separate volume
Soft Termination Type GRJ Series
Large Capacitance and High Allowable
Ripple Current GR3 Series
p148
p11
Product specifications are as of July 2012
p153
p11
Selection Guide
p2
p3
Capacitance Table
Part Numbering
Only for Applications
p15
For LCD Backlight Inverter Circuit
GRM/DC3.15kV Series
For Information Devices GR4 Series
For Camera Flash Circuit GR7 Series
p158
p161
p165
p12
p12
p12
Chip Monolithic Ceramic Capacitors
AC250V Type (Which Meet Japanese Law)
Cap. Table
GA2 Series
p169
p12
For General Purpose GRM Series
(Less than 250Vdc)
p21 separate volume
Safety Standard Certified GA3 Series
UL, IEC60384-14 Class X1/Y2 Type GC
IEC60384-14 Class Y2, X1/Y2 Type GF
IEC60384-14 Class Y3 Type GD
p173
p174
p176
p177
p13
p13
p13
p13
Capacitor Array GNM Series
p76
p4
IEC60384-14 Class X2 Type GB
Reference Data (Typical Example)
Package
!Caution/Notice
p182
p185
p188
Low ESL LLL/LLR/LLA/LLM Series
High-Q Type GJM Series
p79
p82
p5
p7
Metal Terminal Monolithic
Ceramic Capacitors
Cap. Table
For General Purpose KRM/KR3 Series
High Frequency GQM Series
p104
p113
p8
p9
High Capacitance for General Use
KRM Series
Large Capacitance and High Allowable
Ripple Current KR3 Series
p200
p204
p14
p14
Monolithic Microchip GMA Series
Package
!Caution/Notice
p208
p210
For Bonding GMD Series
p115
p118
p10
ISO 9001 Certifications
Introduction of Website SimSurfing
EMICON-FUN!
p215
p216
p217
!Caution/Notice
Product Information p218
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Selection Guide For Chip Monolithic Ceramic Capacitors
Function
Type
Series
GRM (X5R, X7R, Y5V etc.)
High Capacitance
68pF–150μF
Decoupling, Smoothing
GNM
470pF–2.2μF
Array (2 or 4 Elements)
Class 1 TC's
GRM (C0G)
0.1pF–0.1μF
Frequency Control/Tuning,
Impedance Matching
GRM (U2J etc.)
Low Inductance
LLL
(Reverse Geometry)
2200pF–10μF
Low Inductance
(Controlled ESR)
LLR
1.0μF
High Speed Decoupling
Low Inductance
LLA/LLM (From 1GHz)
(Multi-Termination)
0.01μF–4.7μF
GJM (500MHz to 10GHz)
Low ESR, Ultra Small
Lowest ESR
0.1pF–47pF
High Frequency
GQM (500MHz to 10GHz)
0.1pF–100pF
GMA 100pF–0.47μF
GMD 100pF–0.47μF
Optical Communications
Wire-Die-Bonding
250Vdc min.
High-Frequency Snubber
250V/630V/1kV/2kV/3.15kV
Low Dissipation
GRM (C0G, U2J)
10pF–47000pF
250Vdc min.
LCD Backlight Inverter
3.15kV
Low Dissipation
GRM (C0G)
5pF–47pF
250V/630V/1kV
GRM (X7R)
High Capacitance
220pF–1μF
250Vdc min.
Decoupling, Smoothing
250V/630V/1kV
Soft Termination
GRJ (X7R)
470pF–1μF
250V/450V/630V
Large Capacitance and
High Allowable Ripple Current
GR3 (X7T)
10000pF–1μF
250Vdc min.
For Camera Flash Circuit only
350V
High Capacitance
GR7
10000pF–47000pF
2kV
GR4
High Capacitance
100pF–10000pF
250Vdc min.
For Information Devices only
Safety Standard
Certified
Type GD 10pF–4700pF
Type GF 10pF–4700pF
Type GC 100pF–330pF
Type GF 470pF–4700pF
Type GB 10000pF–56000pF
Safety Standard
Certified
AC Lines Noise Removal
AC250V which meets
Japanese Law
GA2
470pF–0.1μF
GCM (X7R etc.)
100pF–47μF
High Capacitance
Class 1 TC's
Automotive
(Powertrain,
Safety Equipment)
GCM (C0G etc.)
1.0pF–56000pF
250V/630V/1kV
Low Dissipation
GCM (U2J)
10pF–47000pF
250Vdc min. for Automotive
(Powertrain, Safety Equipment)
250V/630V
GCJ (X7R)
Soft Termination
1000pF–0.47μF
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Capacitance Table
o Temperature Characteristics Table
Temperature
Characteristic Codes
Temperature Characteristics
Capacitance Change Each Temperature (%)
Operating
Temperature
Range
Capacitance Change
or Temperature
Coefficient
–55°C
–25°C
Min.
–10°C
Max.
Public
STD Code
Reference
Temperature
Temperature
Range
Min.
Max.
0.4
0.59
1.54
0.82
0.49
-
Max.
Min.
–0.17
–0.±±
–1.1±
–0.54
–0.27
-
0.25
0.±8
1.02
0.55
0.±±
-
–0.24
0±±0ppmꢀ°C
0±ꢁ0ppmꢀ°C
0±250ppmꢀ°C
0±120ppmꢀ°C
0±ꢁ0ppmꢀ°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 105°C
–55 to 105°C
–55 to 85°C
–55 to 85°C
–25 to 85°C
–55 to 125°C
0.58
C0G
C0H
CK
CJ
EIA
EIA
JIS
JIS
JIS
JIS
EIA
JIS
JIS
JIS
EIA
JIS
JIS
JIS
EIA
JIS
JIS
JIS
EIA
JIS
JIS
JIS
EIA
JIS
JIS
EIA
EIA
EIA
EIA
JIS
EIA
EIA
EIA
EIA
JIS
25°C
25°C
20°C
20°C
20°C
20°C
25°C
20°C
20°C
20°C
25°C
20°C
20°C
20°C
25°C
20°C
20°C
20°C
25°C
20°C
20°C
20°C
25°C
20°C
20°C
25°C
25°C
25°C
25°C
20°C
25°C
25°C
25°C
25°C
20°C
25°C
25 to 125°C
25 to 125°C
20 to 125°C
20 to 125°C
20 to 125°C
–0.11
–0.21
–0.75
–0.±ꢁ
–0.18
-
0.87
–0.48
2.5ꢁ
–1.88
1.±7
–0.9
0.82
–0.45
CH
SL
-
-
20 to 85°C +±50 to –1000ppmꢀ°C
1.02
1.57
1.1
0.88
1.±2
1.8±
1.±5
1.1±
1.79
2.2±
1.7ꢁ
1.54
2.±9
2.74
2.27
2.05
±.84
±.77
±.29
-
0.72
1.ꢁ1
2.±ꢁ
1.ꢁ5
1.±2
2.08
2.74
2.0±
1.7
2.81
±.±5
2.ꢁ±
2.±
±.75
4.12
±.4
±.07
ꢁ.04
5.ꢁ5
4.94
-
0.5
–0.45
0.14
0.41
0.88
–0.14
0.45
0.72
1.49
0.±ꢁ
0.95
1.22
2.2ꢁ
0.99
1.58
1.85
±.47
2.25
2.84
-
2.±±
25 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
25 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
25 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
25 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
25 to 125°C
20 to 85°C
20 to 85°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 105°C
–55 to 105°C
–55 to 85°C
–55 to 85°C
–25 to 85°C
–55 to 125°C
–150±ꢁ0ppmꢀ°C
–150±250ppmꢀ°C
–150±120ppmꢀ°C
–150±ꢁ0ppmꢀ°C
–220±ꢁ0ppmꢀ°C
–220±250ppmꢀ°C
–220±120ppmꢀ°C
–220±ꢁ0ppmꢀ°C
–±±0±ꢁ0ppmꢀ°C
–±±0±250ppmꢀ°C
–±±0±120ppmꢀ°C
–±±0±ꢁ0ppmꢀ°C
–470±ꢁ0ppmꢀ°C
–470±250ppmꢀ°C
–470±120ppmꢀ°C
–470±ꢁ0ppmꢀ°C
–750±120ppmꢀ°C
–750±250ppmꢀ°C
–750±120ppmꢀ°C
±15ꢂ
0.±2
–0.±
0.09
0.27
0.5ꢁ
–0.09
0.±
0.48
0.95
0.24
0.ꢁ±
0.81
1.44
0.ꢁꢁ
1.05
1.2±
2.21
1.5
1.89
-
P2H
PK
-
-
-
-
PJ
-
-
PH
±.02
1.28
R2H
RK
-
-
-
-
RJ
-
-
RH
S2H
SK
4.09
2.1ꢁ
-
-
-
-
SJ
-
-
SH
5.4ꢁ
±.28
T2H
TK
-
-
-
-
TJ
-
-
TH
8.78
5.04
U2J
UK
UJ
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
X7R
X7S
X7T
X7U
R
-
-
±22ꢂ
-
-
-
-
+22ꢂ, –±±ꢂ
+22ꢂ, –5ꢁꢂ
±15ꢂ
-
-
-
-
-
-
-
-
-
-
-
-
±22ꢂ
X6S
X6T
X5R
X5S
B
-
-
-
-
+22ꢂ, –±±ꢂ
±15ꢂ
-
-
-
-
-
-
-
-
±22ꢂ
-
-
-
-
±10ꢂ
-
-
-
-
-: Murata Temperature Characteristic
±10ꢂ
-
-
c GRM Series
Chip Monolithic Ceramic Capacitors
For General Purpose GRM Series
Capacitance Table
For the Capacitance Table of General Purpose GRM Series,
please review the inserted Capacitance Table of
"Chip Monolithic Ceramic Capacitor and General Purpose GRM Series".
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GRM Series Temperature Compensating Type
p00
←
CK
CJ
CH
SL
PK
PJ
PH
RK
RJ
RH
SK
SJ
SH
TK
TJ
TH
UK
UJ
Part Number List
JIS:
C0G P2H R2H S2H T2H U2J
EIA:
L×W (mm)
0.4×0.2
0.22
0.6×0.3
0.33
1.0×0.5
T max. (mm)
0.33
50
0.55
50
Rated Voltage (Vdc)
16
10
50
25
UΔ R2H RΔ S2H SΔ T2H TΔ
Cap. / TC Code C0G CΔ C0G CH C0G CΔ
UJ C0G CΔ C0G CΔ P2H PΔ R2H RΔ
p39 p42
p39 p42
p39 p42
p39 p42
p39 p43
p39 p43
p40 p43
p40 p44
p40 p44
p41 p44
p41 p45
p41 p45
p42 p45
p42 p45
p42 p45
p42 p45
p42 p45
p42 p46
p42 p46
p42 p46
p42 p46
p36 p38
p36 p38
p28 p32
0.1pF
p28
p28
p28
p29
p29
p29
p30
p30
p30
p31
p31
p31
p31
p31
p31
p31
p31
p31
p32
p32
p32
0.2pF p22 p25
0.5pF p22 p25
1.0pF p22 p25
2.0pF p22 p25
3.0pF p22 p25
4.0pF p23 p26
5.0pF p23 p26
6.0pF p23 p26
7.0pF p24 p27
8.0pF p24 p27
9.0pF p24 p28
10pF p25 p28
12pF p25 p28
15pF p25 p28
18pF p25 p28
22pF p25 p28
27pF p25 p28
33pF p25 p28
39pF p25 p28
47pF p25 p28
56pF
p36 p38
p32
p46
p37 p38
p35 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p36 p36 p36 p36
p32 p35 p35 p35
p32 p35 p35 p35
p32 p35 p35 p35
p33 p35 p35 p35
p33 p35 p35 p35
p33 p35 p35 p35
p34 p35 p35 p35
p34 p35 p35 p35
p34 p35 p35 p35
p35 p35 p35 p35
p35 p35 p35 p35
p35 p35 p35 p35
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46
p37 p38
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p46 p46
p37 p38
p37 p38
p37 p38
p37 p38
p37 p38
p37 p38
p37 p38
p37 p38
p37 p39
p37 p39
p36 p37 p39
p36 p37 p39
p36 p37 p39
p36 p37 p39
p36 p37 p39
p36 p37 p39
p35
p35
p35
p35
p35
p35
p35 p35
p35 p35
p35 p35
p35 p35
p35 p35
p35 p35
p46
p46
p46
p46
p39 p42
p36 p36 p36 p37
p36 p36 p36 p37
p36 p36 p36 p37
p36 p36 p36 p37
p35 p35 p36 p36
p35 p35 p36 p36
p35 p35 p36 p36
p35 p35 p36 p36
p28 p28 p32 p35
p28 p28 p32 p35
p28 p28 p32 p35
p28 p28 p32 p35
p39 p42
p39 p42
p39 p42
68pF
82pF
100pF
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p42 p46
p37 p39
120pF
p37 p39
p38 p39
p38 p39
p38 p39
p38 p39
p38 p39
p38 p39
p38 p39
p38 p39
150pF
180pF
The indication for every 0.1 pF has
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
separate volume 1
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series Temperature Compensating Type)
p00
←
CK
CJ
CH
SL
PK
PJ
PH
RK
RJ
RH
SK
SJ
SH
TK
TJ
TH
UK
UJ
Part Number List
JIS:
EIA:
C0G P2H R2H S2H T2H U2J
L×W (mm)
1.0×0.5
0.55
1.6×0.8
100
T max. (mm)
0.5
0.9
Rated Voltage (Vdc)
50
10
50
SL U2J UJ
10
50
10
SL
Cap. / TC Code S2H SΔ T2H TΔ
UΔ
SL U2J UJ
SL U2J UJ C0G CΔ C0G CΔ
SL U2J UJ
p55 p58
p55 p58
p55 p58
p55 p59
p55 p59
p56 p59
p56 p59
p56 p60
p57 p60
p57 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p58 p61
p48 p51
p48 p51
p48 p52
p49 p52
p49 p52
p49 p52
p49 p53
p50 p53
p50 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p54
p51 p55
0.5pF
1.0pF p46 p47 p47 p47 p47
2.0pF p46 p47 p47 p47 p47
3.0pF p46 p47 p47 p47 p47
4.0pF p46 p47 p47 p47 p47
5.0pF p46 p47 p47 p47 p47
6.0pF p46 p47 p47 p47 p47
7.0pF p47 p47 p47 p47 p47
8.0pF p47 p47 p47 p47 p47
9.0pF p47 p47 p47 p47 p47
10pF p47 p47 p47 p47 p47
12pF p47 p47 p47 p47 p47
15pF p47 p47 p47 p47 p47
18pF p47 p47 p47 p47 p47
22pF p47 p47 p47 p47 p47
27pF p47 p47 p47 p47 p47
33pF p47 p47 p47 p47 p47
39pF p47 p47 p47 p47 p47
The indication for every 0.1 pF has
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
p47 p47 p47
p47 p47 p47
p47 p47 p47
p47 p47 p47
p47 p47 p47
p47
47pF
56pF
68pF
82pF
100pF
120pF
p47
150pF
p47
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
p61
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
p61
p61
p61
p61
p61
p61
p61
p58 p61 p61 p61
p58 p61 p61 p61
p58 p61 p61 p61
p58 p61 p61 p61
p58 p61 p61 p61
p58 p61 p61 p61
p58 p61 p61 p61
p47 p47 p48
p47 p47 p48
p47 p47 p48
p47 p48 p48 p48 p48 p48
p47 p48 p48 p48 p48 p48
p47 p48 p48 p48 p48 p48
p47 p48 p48 p48 p48 p48
p47 p48 p48 p48 p48 p48
p61 p61 p61
p61 p61 p62
p61 p61 p62
p61 p61 p62
p61 p61 p62
p48 p48 p48
p48 p48 p48
p48 p48 p48
p48 p48 p48
p62
p62
p62
p62
separate volume 2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series Temperature Compensating Type)
p00
←
CK
CJ
CH
SL
PK
PJ
PH
RK
RJ
RH
SK
SJ
SH
TK
TJ
TH
UK
50
UJ
Part Number List
JIS:
EIA:
C0G P2H R2H S2H T2H U2J
L×W (mm)
1.6×0.8
0.9
2.0×1.25
50
T max. (mm)
0.7
0.95
1
Rated Voltage (Vdc)
10
100
50
10
250
Cap. / TC Code U2J UJ C0G CH C0G CH
SL U2J UJ C0G CH
SL U2J UJ
SL U2J UJ C0G U2J SL U2J UJ
p136
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
p136
p136
p136
p136
p136
p136
p136
p136
p136
p136
p136
p136 p137
p136 p137
p136 p137
p136 p137
p136 p137
p136 p137
p136 p137
p137
100pF
120pF
p62 p62
p62 p62
150pF
p62 p62
180pF
p62 p62
220pF
p62 p62
270pF
p62 p62
330pF
p62 p62
390pF
p62 p62
p137
470pF
p62 p62
p137
560pF
p62 p62
p137
680pF
p62 p62
p137
820pF
p62 p62
p137
1000pF
p62 p62
p138
1200pF
p62 p62 p62 p62
p62 p62 p62 p62
p62 p62 p62 p62
p62 p62 p62 p62
p62 p62 p62 p62
p62 p62 p62 p62
p62 p62
p138
1500pF
p138
1800pF
p138
2200pF
2700pF
3300pF
3900pF
p62 p62
4700pF
p62 p62
p62 p62
5600pF
6800pF
p62 p62
8200pF
p62 p62 p62
10000pF
12000pF p62 p62
15000pF p62 p62
18000pF p62 p62
22000pF p62 p62
27000pF
33000pF
39000pF
47000pF
56000pF
p62
p62
p62
p62 p62 p62 p62
p62 p62 p62 p62
p62 p62
p62 p62 p62
p62 p62 p62
p62 p62 p63
p62 p62 p62
separate volume 3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series Temperature Compensating Type)
p00
←
CK
CJ
CH
SL
PK
PJ
PH
RK
RJ
RH
SK
SJ
SH
TK
TJ
TH
UK
UJ
Part Number List
JIS:
EIA:
C0G P2H R2H S2H T2H U2J
2.0×1.25
L×W (mm)
3.2×1.6
T max. (mm)
1.35
1.45
250
0.95
1
Rated Voltage (Vdc)
Cap. / TC Code C0G CH
10pF
50
10
100
50
2000
1000
630
250
SL U2J UJ
SL U2J UJ U2J C0G CH C0G CH
SL U2J UJ U2J C0G U2J C0G U2J U2J
p139 p137 p139 p136 p138
p139 p137 p139 p136 p138
p139 p137 p139 p136 p138
p139 p137 p139 p136 p138
p139 p137 p139 p137 p138
p139 p137 p139 p137 p138
p139 p137 p139 p137 p138
p139 p137 p139 p137 p138
p139 p137 p139 p137 p138
p139 p137 p139 p137 p138
p139 p137 p139 p137 p138
p137 p139 p137 p138
p137 p139 p137 p138
p137 p139 p137 p138
p137 p139 p137 p138
p137 p139 p137 p138
p137 p139 p137 p138
p139 p137 p138
p139 p137 p138
p137 p138
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
p137 p138
470pF
p137 p138
560pF
p138
680pF
p138
820pF
p138
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF p63 p63
22000pF p63 p63
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.1μF
p138
p138
p138
p63 p63
p63 p63
p138
p138
p138 p63 p63
p138 p63 p63
p138 p63 p63
p138 p63 p63
p138 p63 p63
p63 p63
p138
p138
p138
p138
p63 p63
p63 p63
p63 p63 p63 p63
p63 p63 p63 p63
p63 p63 p63 p63
p63 p63 p63 p63
p63 p63
p63 p63
p63 p63 p63
p63 p63 p63
p63 p63
p63 p63 p63
p63 p63 p63
p63 p63 p63
p63 p63 p63
separate volume 4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series Temperature Compensating Type)
p00
←
CK
CJ
CH
SL
PK
PJ
PH
RK
RJ
RH
SK
SJ
SH
TK
TJ
TH
UK
UJ
Part Number List
JIS:
EIA:
C0G P2H R2H S2H T2H U2J
L×W (mm)
3.2×1.6
1.25
3.2×2.5
T max. (mm)
1.8
1000 630
1
1.25
1.5
2
Rated Voltage (Vdc) 1000
630
250
50
50
2000 630 2000 1000 630 1000 630 1000 630
Cap. / TC Code U2J C0G U2J U2J C0G CH
SL U2J UJ U2J U2J C0G CH U2J U2J U2J U2J U2J U2J U2J U2J U2J
p140
p140
p140
p140
p140
p140
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF p139
470pF p139
560pF p139
680pF p139 p137
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.1μF
p137
p137
p139
p139
p138
p138
p138
p138
p139
p139
p139
p139
p138
p138
p138
p138
p138
p138
p138
p138
p138
p138
p139
p63 p63
p63 p63
p63 p63 p63
p63 p63 p63
p63 p63 p63
p63 p63
p63 p63
p63 p63
separate volume 5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series Temperature Compensating Type)
p00
←
CK
C0G P2H R2H S2H T2H U2J
4.5×3.2 5.7×5.0
CJ
CH
SL
PK
PJ
PH
RK
RJ
RH
SK
SJ
SH
TK
TJ
TH
UK
UJ
Part Number List
JIS:
EIA:
4.5×
L×W (mm)
2.0
1
T max. (mm)
1.5
2
1.5
2
Rated Voltage (Vdc) 3150 1000 630 1000 630 1000 630 1000 630
Cap. / TC Code U2J U2J U2J U2J U2J U2J U2J U2J U2J
27pF p140
33pF p140
39pF p140
47pF p140
56pF p140
68pF p140
82pF p140
100pF p140
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
p139
p139
3900pF
p139
p139
4700pF
5600pF
p139
p139
6800pF
8200pF
p139
p139
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
p139
p139
p139
p139
p139
p139
p139
p139
separate volume 6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GRM Series High Dielectric Constant Type
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
EIA:
Part Number List
JIS:
L×W (mm)
0.4×0.2
0.22
0.6×0.3
0.33
1.0×0.5
0.22
T max. (mm)
Rated Voltage (Vdc)
10
6.3
4
50
25
16
10
6.3
4
10
6.3
4
2.5
Cap. / TC Code X7R X5R, B X5R, B X5R X7R
B
X7R, R X5R, B X7R, R X5R, B X7R, R X5R, B X7R, R X6S X5R, B X6S X5R, B X6S X5R, B X7T X6Δ X7T
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
p64
68pF p64
100pF p64
150pF p64
220pF p64
330pF p64
470pF p64
680pF
p65 p65 p65 p65 p65 p65
p65 p65 p65 p65 p65 p65
p65 p65 p65 p65 p65 p65
p65 p65 p65 p65 p65 p65
p65 p65 p65 p65 p65 p65
p65 p65 p65 p65 p65 p65
p65 p65 p65 p65 p65 p65
p65 p65 p65 p65 p65
p64 p64
p64 p64
p64 p64
p64 p64
p64 p64
p64 p64
p64 p64
p64 p64
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p65 p65 p65 p65 p65
p65 p65 p65 p65 p65
p65 p65 p65 p66 p66 p66
p65 p65 p66 p66 p66 p66
p66
p66
p65 p65
p65 p65 p65 p65 p66 p66 p66 p66
p66 p66
p66 p66
p66 p66
p66 p66
p66 p66
p66 p66
p66 p66
p66 p66
p66 p66
p66 p66
p64 p64
p64 p64
p64 p64
p66 p66 p66
p66 p66 p66
p66 p66 p66
p64 p64
p64 p64
p64 p64
p66 p66 p66
p66
p65 p65
p66 p66
p66
p66 p66 p66 p67 p67 p67 p67 p67
0.15μF
0.22μF
p66
p66 p66 p66 p66 p66 p67 p67 p67 p67 p67 p67
0.33μF
0.47μF
p67 p67
p67
0.68μF
1.0μF
2.2μF
4.7μF
10μF
22μF
47μF
100μF
150μF
separate volume 7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
EIA:
Part Number List
JIS:
L×W (mm)
1.0×0.5
0.33
T max. (mm)
0.3
B
0.55
25
Rated Voltage (Vdc)
50
25
X7R
16
X7R
10
10
6.3
4
100
50
16
10
Cap. / TC Code X7R, R
68pF
B
B
X5R X5R, B X6T X5R, B X6T X5R X7R X7Δ, R X6S X5R, B X7R, R X6S X5R, B X7R, R X5R, B X7R, R
100pF
150pF
220pF p67 p67
330pF p67 p67
470pF p67 p67
680pF p67 p67
1000pF p67 p67
1500pF p67 p67
2200pF
p67
p67
p67
p67
p67
p67
p67 p67 p68
p67 p67 p68
p67 p67 p68
p67 p67 p68
p67 p67 p68
p67 p67 p68
p67 p67 p68
p67 p67 p68
p67 p67 p68
p67 p68
p68
p68
p68
p68
p68 p68
p68
p67 p67
p68 p68
p68
3300pF
p67 p67
p67 p67
p67 p67
p67 p67
4700pF
p68 p68
p68 p68 p68
p68 p68 p68
p68
p68
p68
6800pF
p67 p68
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p67
p67
p67
p67
p67
p67
p68 p68 p68
p68 p68 p68
p68 p68 p68
p68
p68
p68 p68 p68 p68 p69
p68
p68
p68 p68 p68
p68
p68 p68 p68 p68 p69
p68 p68 p68 p68 p68 p68 p69 p69 p69
p68 p68 p68 p68 p68 p68 p68 p68
0.15μF
p68
p68
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
p67 p67 p67 p67 p67 p67 p67
p68 p68
p69 p69
2.2μF
4.7μF
10μF
22μF
47μF
100μF
150μF
separate volume 8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
EIA:
Part Number List
JIS:
L×W (mm)
1.0×0.5
4
1.6×0.8
0.9
0.55,
0.9,
0.95, 1
T max. (mm)
0.55
6.3
0.6, 0.7 0.6
0.7
2.5
0.5
0.6
Rated Voltage (Vdc)
10
6.3
4
2.5
25
16
250 100
50
25
16
6.3
2.5 25
Cap. / TC Code X6S X5R, B X7R X6S X7R X6Δ X5R, B X5R, B X6T X5R X5R, B X5R, B X7R X7R X7R, R X5R, B X7R, R X6S X7Δ, R X6S X6S X5R, B
68pF
100pF
150pF
p143 p69 p70
p143 p69 p70
p143 p69 p70
p143 p70 p70
p143 p70 p70
p143 p70 p70
p143 p70 p70
p70 p70
p70
p70
p70
p70
p70
p70
p70
p70
p70
p70
p70
p70
p70
220pF
330pF
470pF
p70
680pF
p70
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p70 p70
p70
0.9
p70 p70
p70
p71
0.9
p71
0.9
p70 p70
p70 p70
p70
p71
0.9
p70 p70
p71
0.9
p70 p70
p70 p70
p71
0.9
p70 p70
p70 p70
p70
p70
p70
p70
p70 p70 p71
p70 p70 p70 p71
p70 p70 p71
p71
0.9
p71
0.9
p71
0.9
p70 p70 p70 p70 p71
p71
0.9
p70
p70
p70
p70 p70 p71
p70
p71
0.9 0.9
p70 p70
p71 p71
0.55 0.55
0.9
0.15μF
p69 p69
p69 p69
p69 p69
p69 p69
p69 p69
p69
p69
p69
p69
p69
p69
p69
p69
p70 p70 p71
p70 p70 p70 p71
p71 p71
p71 p71
p71 p71
p71 p71
p71
p69 p69
p71
0.55 0.55
0.9 0.9
0.22μF
p69 p69
p71 p71
0.55 0.55
0.33μF
p69 p69
0.55 0.55
0.9 0.9
0.47μF
p70 p70
p69 p69
p71 p71
0.55 0.55
0.9 0.9
0.68μF
p69 p69
p71 p71
0.9 0.9
1.0μF p69
p69
p69
p69 p69 p69 p69
p70 p70 p70 p71 p71
p71 p71
0.55 0.55
0.9 0.9
2.2μF
4.7μF
10μF
p69 p69
p69
p69
p71
p72
p69 p69
p71 p71
0.6 0.6 0.6 0.6
0.95, 1
p69
p69 p69 p69 p69
p72
0.7
1
p69
p72
p69
p72
22μF
47μF
100μF
150μF
separate volume 9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
EIA:
Part Number List
JIS:
L×W (mm)
1.6×0.8
0.9, 1
6.3
2.0×1.25
0.95
0.9,
0.9,
T max. (mm)
1
0.7
0.95, 1
0.95
Rated Voltage (Vdc) 16
16
10
4
10
35
25
16
100
50
35
25
16
Cap. / TC Code X5R, B X6S X7Δ X6S X7Δ X5R, B X6S X5R, B X5R, B X5R X5R X6S X7R X5R, B X6S X5R X7R
R
X6S X5R
B
X7R
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p72
p72
p72
p72 p72
p72
0.9
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
p71
0.9 0.9
p71 p71
0.9
0.9
0.9 0.9
p72
p72
p71
p71
p71 p71
0.9
p72
p71
0.9 0.9
0.9
0.9 0.9
p72
p72
p72 p72
p72
p71 p71
p71
p71 p71
0.9 0.9 0.9
0.9
p72 p72
p72 p72
p71 p71 p71
p71
0.9 0.9 0.9 0.9 0.9 0.9
0.9
0.9 0.9
2.2μF
p72 p72 p72
p72 p72 p72 p72
p71 p71 p71 p71 p71 p71
p71
p71 p71
0.95 0.95
0.9
4.7μF
p72
p72
p72
p72 p72
p72
1
1
1
1
1
0.9 0.9 0.9 0.9 0.9 0.95
10μF
p72 p72
p72
p72
p72
p72
p72 p72 p72 p72 p72 p72 p72
1
1
1
1
1
22μF
p72 p72 p72 p72 p72
47μF
100μF
150μF
separate volume 10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
2.0×1.25
Part Number List
JIS:
EIA:
L×W (mm)
T max. (mm)
0.95
0.95, 1
50
1
1.35
Rated Voltage (Vdc)
Cap. / TC Code
68pF
16
10
6.3
4
250 100 100
50
25
16
R
X6S X5R
B
X7Δ X5R
B
X6S X5R
B
X6S X5R X7R, R X7R X7R X7R X7R, R X5R, B X7R, R X6S X5R, B X7R
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p143
p143
p143
p143
p143
p143
0.95
p73
p72
0.95
p73
p72
1
p73
p73
0.95 0.95
p73
p72 p72
p73 p73 p73 p73
p73 p73 p73 p73
p73 p73 p73 p73 p73 p73
0.15μF
p73 p73 p73 p73
p73 p73
p73
p73
p73
0.22μF
p73
p73
0.95
0.33μF
p72
0.47μF
p73 p73
p73 p73
p73 p73 p73
0.68μF p72
1.0μF
p72
2.2μF
p72
p73 p73 p73
4.7μF
p72 p72 p72 p72
p72 p72
p73 p73 p73
10μF
p72
p73
22μF
p72 p72
p72 p72
47μF
p73
100μF
150μF
separate volume 11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
EIA:
Part Number List
JIS:
L×W (mm)
2.0×1.25
1.4
T max. (mm)
1.35
10
1.45
6.3
Rated Voltage (Vdc)
16
6.3 100
50
25
16
10
6.3
4
250
25
4
Cap. / TC Code X6S X5R, B X6S X6S X7R X5R, B X7R, R X5R, B X7R X6S X7R
B
X7R X6S X5R, B X7U X6S X7R X5R X5R, B X6S X5R, B
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p143
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
p73
p73 p73 p73
p73 p73 p73
2.2μF
p73 p73
4.7μF p73 p73 p73
p73 p73
p73
p73
10μF
22μF
p73 p73 p73 p73
p73 p73
p73 p73
p73
p73
p73 p73 p73 p74 p74
p74
47μF
p74 p74 p74 p74 p74
100μF
150μF
separate volume 12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
3.2×1.6
Part Number List
JIS:
EIA:
L×W (mm)
T max. (mm)
0.7
0.95
1.25
50
1.25, 1.3
100 25
1.8
630
Rated Voltage (Vdc) 25
16
100
50
35
25
16
10
6.3
1000 630 250
16
Cap. / TC Code X5R, B X6S X7R X7R X5R X7R, R
B
X6S X5R, B X5R, B X6S X5R, B X7R X7R X7R X7R, R
B
X6S
B
X7R X5R, B X7R
68pF
100pF
150pF
220pF
330pF
470pF
p144
p144
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
p144
p144
p144
p144
p144
p144
p144
p144
p144
p144
p144
p144
p143
p143
p144
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p74
1.25
p74
1.25
p74
1.25
p74
1.25
p143
p74
p74
1.25
0.15μF
p74 p74 p74
p74 p74 p74
p74
1.25 1.25
0.22μF
p74
p74
0.33μF
p74
p74 p74 p74
p74
1.3
0.47μF
p74
p74
p74
1.3
0.68μF
p74
p74
p74
1.0μF
p74 p74
1.3
2.2μF p74 p74 p74
p74
4.7μF
10μF
p74
1.25
p74
p74 p74
p74
p74
22μF
p74 p74 p74 p74 p74
47μF
100μF
150μF
separate volume 13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
3.2×1.6
Part Number List
JIS:
EIA:
L×W (mm)
3.2×2.5
T max. (mm)
1.8
1.8, 1.9
6.3
1.9
4
1
4
Rated Voltage (Vdc) 250
50
25
16
10
6.3 100
4
6.3
Cap. / TC Code X7R X7R X5R, B X7R X6S X5R, B X7R, R X6S X5R, B X7R X6S X5R, B X7Δ X7R X6Δ X5R, B X7U X6Δ X5R X5S X6T X5S
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF p143
39000pF
47000pF p143
68000pF
0.1μF p143
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.8
1.0μF
p74
1.9
2.2μF
4.7μF
10μF
p74 p74 p74
p74
p74 p74 p74
p74 p74
p74 p74 p74 p74 p74
p74 p74
p74 p74
1.8
22μF
p74 p74 p74 p74 p74 p74 p74 p74
p74 p74 p74
p74
1.8 1.8 1.8 1.8
1.8
47μF
p74 p74 p74 p74
p74
1.9
1.9
1.9
1.9
100μF
150μF
p74
p74
p74
p74
p74
p75 p75 p75
separate volume 14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
3.2×2.5
Part Number List
JIS:
EIA:
L×W (mm)
T max. (mm)
1
1.5
1.8
2
2.2
25
2.7
Rated Voltage (Vdc) 2.5 1000 630 250
50
10
100 1000 630 250
100
50
35
25
16
Cap. / TC Code X6T X7R X7R X7R X7R
B
X6S X7R X7R X7R X7R X7R X6S X7R X7R X5R, B X7R X5R, B X7R X6S X5R, B X7R
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p144
p144
p144
p144
p144
p144
p143
p143
p144
p143
p143
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
p75 p75
p75
p75
2.2μF
p75
4.7μF
p75 p75
10μF
p75 p75
p75 p75 p75 p75 p75 p75
22μF
p75
p75 p75 p75 p75 p75
47μF
100μF
150μF p75
separate volume 15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
→
(
c GRM Series High Dielectric Constant Type)
p00
←
R
B
X7R X7S X7T X7U X6S X6T X5R X5S
4.5×3.2
Part Number List
JIS:
EIA:
L×W (mm)
3.2×2.5
2.7
5.7×5.0
2
T max. (mm)
1.5
2
Rated Voltage (Vdc)
16
10
6.3
4
630 250 1000 630 250 1000 630 250
Cap. / TC Code X6S X5R, B X7R X6S X5R, B X7Δ X6S X5R, B X7U X6S X7R X7R X7R X7R X7R X7R X7R X7R
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
p144
p144
p144
p144
p144
p144
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.0μF
p143
p144
p144
p144
p144
p144
p144
p144
p144
p144
2.2μF
4.7μF
10μF
22μF
p75
47μF p75 p75 p75 p75 p75 p75 p75 p75 p75
100μF
150μF
p75 p75 p75 p75 p75 p75
separate volume 16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GNM Series High Dielectric Constant Type
p00
←
R
B
X7R X5R
EIA:
Part Number List
JIS:
Number of Elements
L×W (mm)
2
0.9×0.6
0.5
1.37×1.0
50
T max. (mm)
0.55
0.7
Rated Voltage (Vdc)
16
10
4
16
X5R
10
25
X5R
16
X7R R
Cap. / TC Code X5R
470pF
B
X5R
B
X5R
B
X7R
R
B
X5R
B
X7R
R
X5R
B
X7R
R
B
p77 p77 p77 p77
1000pF
p77 p77 p77 p77
p77 p77 p77 p77
p77 p77 p77 p77
2200pF
4700pF
p77 p77 p77 p77
p77 p77 p77 p77
p77 p77 p77 p77
p77 p77 p77 p77
10000pF
22000pF
47000pF
0.1μF
p77 p77
p77 p77
p77 p77
p77 p77
p77
0.22μF
0.47μF
1.0μF
p77 p77
p77
p77 p77
2.2μF
Number of Elements
L×W (mm)
2
4
1.37×1.0
2.0×1.25
T max. (mm)
0.7
0.8
10
0.55
0.7
50
Rated Voltage (Vdc)
16
10
X5R
16
X5R
6.3
16
R
10
X5R
6.3
Cap. / TC Code X5R
470pF
B
X7R
R
B
B
X5R
B
X5R
B
X7R
B
B
X5R
B
X7R
R
B
p77
p77
p77 p77 p77
1000pF
2200pF
4700pF
10000pF
p77 p77 p77 p77 p77 p77
p77 p77 p77 p77 p77 p77
22000pF
47000pF
0.1μF
p77
p77 p77
p77 p77 p77
p77
p77
p77
p77 p77 p77 p77
p77 p77 p77 p77
0.22μF
0.47μF
1.0μF
p77 p77 p77 p77
p77 p77 p77 p77
2.2μF
Number of Elements
L×W (mm)
4
2.0×1.25
T max. (mm)
0.7
25
R
0.95
10
X5R
Rated Voltage (Vdc)
Cap. / TC Code X7R
470pF
16
6.3
B
X7R
R
B
B
X5R
B
1000pF
p77 p77 p77
p77 p77 p77
p77 p77 p78
2200pF
4700pF
10000pF
22000pF
47000pF
0.1μF
p78 p78 p78
p78 p78 p78
p78 p78 p78
0.22μF
0.47μF
1.0μF
p78 p78 p78 p78
2.2μF
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c LLL Series High Dielectric Constant Type
p00
←
X7R X7S X6S X5R
EIA:
Part Number List
L×W (mm)
0.5×1.0
0.35
0.8×1.6
0.55
1.25×2.0
T max. (mm)
0.5
0.6
16
0.5
0.7
25
0.95
16
Rated Voltage (Vdc) 6.3
4
25
16
10
4
4
50
25
10
4
50
25
16
10
6.3
4
50
10
Cap. / TC Code X6S X7S X7R X7R X7R X7S X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7S X7R X7R X7R X7R
p80
p80
2200pF
4700pF
p80
p80
p80
p80
p80
p80
10000pF
22000pF
47000pF
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
0.1μF p80
p80
p80
p80 p80
0.22μF p80
0.47μF
1.0μF
p80
p80
p80
p80
p80
p80
2.2μF
4.7μF
10μF
L×W (mm) 1.25×2.0
1.6×3.2
10
T max. (mm)
0.95
0.5
0.8
16
1.25
Rated Voltage (Vdc) 10
4
50
25
16
10
50
25
6.3
50
25
16
10
6.3
Cap. / TC Code X7R X7S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X5R
2200pF
4700pF
10000pF
22000pF
47000pF
0.1μF
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
0.22μF
0.47μF p80
1.0μF p80
2.2μF
p80
p80
p80
p80
p80
p80
4.7μF
p80
10μF
p80
c LLR Series High Dielectric Constant Type
p00
←
X7S
EIA:
Part Number List
L×W (mm)
0.8×1.6
0.55
4
T max. (mm)
Rated Voltage (Vdc)
TC Code
X7S
Cap. / ESR (mΩ) 100 220 470 1000
1.0μF p80 p80 p80 p80
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c LLA Series High Dielectric Constant Type
p00
←
X7R X7S
Part Number List
1.6×
EIA:
L×W (mm)
2.0×1.25
3.2×1.6
0.95
6.3 16 10
0.8
T max. (mm) 0.55
Rated Voltage (Vdc)
0.55
0.95
10
0.55
10
1.25
16 10
4
25
16
10
6.3
4
25
16
6.3
4
16
Cap. / TC Code X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7R X7R
p81
p81
p81
p81
p81
10000pF
22000pF
47000pF
0.1μF
p81
p81
p81
p81
p81
p81
p81
p81
0.22μF
p81
p81
p81
p81
0.47μF p81
p81
p81
p81
p81
p81
p81
p81
p81
p81 p81
1.0μF
2.2μF
4.7μF
p81
p81
p81
c LLM Series High Dielectric Constant Type
p00
←
X7R X7S
EIA:
Part Number List
L×W (mm)
2.0×1.25
0.55
3.2×1.6
0.55
T max. (mm)
Rated Voltage (Vdc) 25
16
6.3
4
16
10
6.3
Cap. / TC Code X7R X7R X7R X7S X7R X7R X7R
p81
p81
10000pF
22000pF
47000pF
0.1μF
p81
p81
p81
p81
p81
p81
0.22μF
0.47μF
1.0μF
p81
p81
p81
p81
2.2μF
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GJM Series Temperature Compensating Type
p00
←
CK
CJ
CH
C0G C0H
EIA:
Part Number List
JIS:
L×W (mm)
0.4×0.2
0.22
0.6×0.3
0.33
1.0×0.5
0.55
T max. (mm)
Rated Voltage (Vdc)
16
25
6.3
50
Cap. / TC Code C0G CΔ C0Δ CΔ C0G CH C0G CΔ
p96 p99
0.1pF
0.2pF
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
11pF
12pF
13pF
15pF
16pF
18pF
20pF
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
47pF
The indication for every 0.1 pF has
p96
p96
p96
p96
p97
p97
p97
p98
p98
p98
p99
p99
p99
p83 p86 p89 p92
p83 p86 p89 p92
p83 p86 p89 p92
p83 p86 p90 p93
p84 p87 p90 p93
p84 p87 p90 p93
p84 p87 p90 p94
p85 p88 p91 p94
p85 p88 p91 p94
p85 p88 p92 p95
p86 p89 p92 p95
p92 p95
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
p99
p100
p100
p100
p101
p101
p101
p102
p102
p99 p102
p99 p102
p92 p95
p92 p95
p99 p102
p92 p95
p99 p102
p92 p95
p99 p102
p92 p95
p99 p102
p92 p95
p99 p102
p95 p95 p99 p102
p95 p95 p99 p102
p95 p95 p99 p102
p95 p95 p99 p102
p95 p95 p99 p102
p99 p102
p99 p102
p99 p103
p99 p103
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GQM Series Temperature Compensating Type
p00
←
CK
CJ
CH
C0G
EIA:
Part Number List
JIS:
2.8×
2.8
L×W (mm)
1.6×0.8
0.9
2.0×1.25
0.95
T max. (mm) 0.8
1
1.35
Rated Voltage (Vdc) 250
100
50
100
50
250 500
Cap. / TC Code C0G C0G CΔ C0G CH C0G CΔ C0G CH C0G C0G
0.1pF p105
The indication for every 0.1 pF has
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
p108 p108
p108 p108
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p108 p109
p110
p110
p111
p111
p111
p111
p111
p111
p111
p111
p111
p111
p111
p111
p111
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
p112
0.5pF p105 p105 p106
1.0pF p105 p106 p106
2.0pF p105 p106 p106
3.0pF p105 p106 p106
4.0pF p105 p106 p106
5.0pF p105 p106 p106
6.0pF p105 p106 p106
7.0pF p105
p110
p110
p110
p110
p110
p110
p106 p107
p106 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p107
p107 p108
p107 p108
p107 p108
p107 p108
p107 p108
p110
8.0pF p105
p110
9.0pF p105
p110
10pF p105
p110
11pF p105
p110
12pF p105
p110
13pF p105
p110
15pF p105
p110
16pF p105
p110
18pF p105
p109 p109 p110
p109 p109 p110
p109 p109 p111
p109 p109 p111
p109 p109 p111
p109 p110 p111
p109 p110 p111
p109 p110 p111
p109 p110 p111
p109 p110 p111
20pF p105
22pF p105
24pF p105
27pF p105
30pF p105
p105
p105
p105
p105
p105
33pF
36pF
39pF
43pF
47pF
51pF
56pF
62pF
68pF
75pF
82pF
91pF
100pF
p109
p109
p109
p109
p109
p109
p109
p109
p110
p110
p110
p110
p110
p110
p110
p110
p111
p111
p111
p111
p111
p111
p111
p111
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GMA Series High Dielectric Constant Type
p00
←
R
B
X7R X5R
EIA:
Part Number List
JIS:
L×W (mm) 0.38×0.38
0.5×0.5
0.4
0.8×0.8
0.6
T max. (mm)
Rated Voltage (Vdc)
0.35
10
100
25
10
6.3
X5R
100
25
10
6.3
Cap. / TC Code X7R
100pF
R
X7R X7R
p114
B
X7R
R
B
B
X7R X7R
B
X7R
R
B
X5R
B
150pF
p114
220pF
p114
330pF
p114
470pF
p114
680pF
p114
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
p114
p114 p114
p114 p114
p114 p114
p114 p114
p114
p114
p114
p114
p114
p114 p114 p114
p114 p114 p114
p114 p114 p114
p114 p114 p114
p114 p114
p114 p114
p114 p114
10000pF p114 p114
15000pF
22000pF
p114 p114 p114
p114 p114 p114
p114 p114 p114
p114 p114 p114
33000pF
47000pF
68000pF
p114 p114
0.1μF
p114 p114
0.47μF
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GMD Series High Dielectric Constant Type
p00
←
R
B
X7R X5R
Part Number List
JIS:
EIA:
L×W (mm)
0.6×0.3
1.0×0.5
0.55
T max. (mm)
0.33
B
Rated Voltage (Vdc)
25
R
16
10
6.3
X5R
50
R
25
R
16
R
10
X5R B
Cap. / TC Code X7R
B
X7R
R
X7R
R
B
B
X7R
B
X7R
B
X7R
B
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
100pF
120pF
150pF
180pF
p116
p116
p116
p116
p116
p116
p116
p116
p116
p116
p116
p116
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
56000pF
68000pF
82000pF
0.1μF
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p117
p116 p117
p116 p117
p116 p117
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p116 p116
p116 p117 p117
p116 p117 p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p117 p117 p117
p116 p116
p116 p116
p116 p116
p116 p116
p117 p117
p117 p117
p117 p117
p117 p117
p117 p117
p117 p117
p117 p117
p117 p117
0.12μF
0.15μF
0.18μF
0.22μF
0.27μF
0.33μF
0.39μF
0.47μF
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GRJ Series High Dielectric Constant Type
p00
←
X7R
EIA:
Part Number List
L×W (mm) 2.0×1.25
T max. (mm)
1.45
3.2×1.6
3.2×2.5
4.5×3.2
5.7×5.0
2
1
1.25
1.8
1.5
2
1.5
2
Rated Voltage (Vdc) 250 250 1000 630 250 1000 630 250 1000 630 250 1000 630 250 630 250 1000 630 250 1000 630 250
Cap. / TC Code X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
p149
470pF
680pF
p149
p149 p149
p149 p149
p149 p149
p149 p149
p149 p149
p149
1000pF p148
1500pF p148
2200pF p148
3300pF p148
4700pF p148
6800pF p148
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.1μF
p149
p149
p149
p149
p148
p148
p148
p149
p148
p148
p149
p149
p149
p149
p149
p148
p148
p149
p149
p149
p149
p148
p148
p148
p149
p149
p149
p148
p148
p148
p149
p148
p149
p149
0.15μF
p148
p148
p148
0.22μF
p148
p148
p148
p148
0.33μF
0.47μF
0.68μF
1.0μF
c GR3 Series High Dielectric Constant Type
p00
←
X7T
EIA:
Part Number List
L×W (mm) 2.0×1.25
T max. (mm) 1.45
3.2×1.6
1.25
3.2×2.5
4.5×3.2
5.7×5.0
1
1
1.8
1.5
2
1.5
2
2
2.7
Rated Voltage (Vdc) 250 250 450 250 630 450 250 630 450 250 630 250 630 450 250 250 630 450 250 630 450 250 630 450 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
10000pF p153
15000pF p153
22000pF
33000pF
47000pF
68000pF
0.1μF
p153
p153
p154
p154
p153
p153
p153
p154
p153
p154
p154
p153
p153
p153
p153
p153
p154
p153
p154
p154
0.15μF
p153
p153
0.22μF
p153
p153
p154
p154
0.27μF
0.33μF
p153
p153
0.47μF
p153 p153
0.56μF
p153
0.68μF
p153
1.0μF
p153
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GRM/DC3.15kV Series High Dielectric Constant Type c GR7 Series
p00
←
C0G
p00
←
-
Part Number List
EIA:
Part Number List
Murata Temperature Characteristic:
3.2×1.6
4.5×
L×W (mm)
L×W (mm) 2.0×1.25
T max. (mm) 1.45
Rated Voltage (Vdc) 350 350 350 350 350
2.0
1
T max. (mm)
1
1
1.25 1.8
Rated Voltage (Vdc) 3150
Cap. / TC Code C0G
5.0pF p158
10pF p158
Cap. / TC Code
-
-
-
-
-
p165
p165
10000pF p165
15000pF p165
22000pF
p165
p165
p165 p165
p165
12pF p158
15pF p158
27000pF
p165 p165
18pF p158
33000pF
p165
22pF p158
47000pF
27pF p158
33pF p158
39pF p158
c GA2 Series High Dielectric Constant Type
47pF p158
p00
←
X7R
EIA:
Part Number List
4.5×
5.7×
L×W (mm)
4.5×3.2
2.0
5.0
T max. (mm) 1.5
1.5
2
2
c GR4 Series High Dielectric Constant Type
Rated Voltage (Vac(r.m.s.)) 250 250 250 250
Cap. / TC Code X7R X7R X7R X7R
470pF p169
p00
←
X7R
EIA:
Part Number List
4.5×
5.7×
5.0
L×W (mm)
4.5×3.2
2.0
T max. (mm) 1.5
1.5
2
2
1000pF p169
Rated Voltage (Vdc) 2000 2000 2000 2000
Cap. / TC Code X7R X7R X7R X7R
2200pF
3300pF
4700pF
10000pF
22000pF
47000pF
0.1μF
p169
p169
p161
p161
p161
p161
p161
p161
p161
p161
p161
p161
p161
p161
p161
p161
p161
p169
p169
100pF
120pF
p169
p169
150pF
180pF
p169
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
10000pF
p161
p161
p161
p161
p161
p161
p161
12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c GA3 Series
c GA3 Series
UL, IEC60384-14 Class X1/Y2 Type GC
High Dielectric Constant Type
IEC60384-14 Class Y3 Type GD
p00
←
SL
X7R
EIA:
Part Number List
JIS:
p00
←
X7R
EIA:
Part Number List
5.7×
L×W (mm)
4.5×2.0
1.5
4.5×3.2
1.5 2
L×W (mm)
T max. (mm)
1
2.2
5.0
T max. (mm) 2.3
Rated Voltage (Vac(r.m.s.)) 250 250 250 250 250
Cap. / TC Code SL X7R SL X7R X7R
Rated Voltage (Vac(r.m.s.)) 250
Cap. / TC Code X7R
100pF p173
p176
p176
p176
p176
p176
10pF
12pF
150pF p173
15pF
220pF p173
18pF
330pF p173
22pF
27pF p176
33pF p176
39pF p176
47pF p176
56pF p176
68pF p176
c GA3 Series
IEC60384-14 Class Y2, X1/Y2 Type GF
p00
←
SL
X7R
EIA:
Part Number List
JIS:
5.7×
4.5×2.0
5.7×5.0
82pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
1800pF
2200pF
4700pF
p176
L×W (mm)
2.8
1
1.5
2.2
1.5
1.5
2
p176
p176
p176
p176
p176
p176
p176
p176
T max. (mm)
Rated Voltage (Vac(r.m.s.)) 250 250 250 250 250 250 250
Cap. / TC Code SL X7R SL X7R X7R X7R X7R
p174
p174
p174
p174
p174
10pF
12pF
15pF
18pF
22pF
p176
p176
27pF p174
33pF p174
39pF p174
47pF p174
56pF p174
68pF p174
82pF p174
100pF
p176
c GA3 Series
IEC60384-14 Class X2 Type GB
High Dielectric Constant Type
p174
p174
150pF
p00
←
X7R
EIA:
Part Number List
p174
p174
220pF
330pF
L×W (mm)
5.7×5.0
p174
p174
p174
p174
470pF
T max. (mm) 1.5
2
2.5
2.9
680pF
Rated Voltage (Vac(r.m.s.)) 250 250 250 250
Cap. / TC Code X7R X7R X7R X7R
p174 p174
p175
1000pF
1500pF
1800pF
2200pF
3300pF
4700pF
p177
p177
10000pF
15000pF
22000pF
33000pF
47000pF
56000pF
p175
p175
p175
p177
p177
p177
p175
p177
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
Capacitance Table
c KRM Series High Dielectric Constant Type
p00
←
X7R X6S X5R
Part Number List
EIA:
3.6× 3.7×
L×W (mm)
3.5×1.7
6.1×5.3
3.9
1.7
1.7
T max. (mm)
2
2.9
50
2.9
2.9
3
5
6.7
Rated Voltage (Vdc) 25
100
25
50
100 100
63
50
25
100
63
50
25
100
25
100
63
50
25
Cap. / TC Code X5R X7R X7R X6S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
1.0μF
2.2μF
4.7μF
6.8μF
10μF p200
15μF
p200
p200 p200
p200
p200 p200 p200
p200
p200
p200 p200
p200
p200
p200
22μF
p200
p200 p200
33μF
p200
47μF
p200
c KR3 Series High Dielectric Constant Type
p00
←
X7T
EIA:
Part Number List
L×W (mm)
6.1×5.3
3.9
T max. (mm)
3
5
6.7
Rated Voltage (Vdc) 630 450 250 630 450 250 450 630 450 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
p204
p204
0.1μF
0.15μF
0.22μF
0.27μF
0.47μF
0.56μF
1.0μF
p204
p204
p204
p204 p204
p204
p204
p204
p204 p204
p204
1.2μF
p204
2.2μF
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
o Part Numbering
Chip Monolithic Ceramic Capacitors
(Part Number)
GR
M
18
8
B1 1H 102
K
A01
D
q
w
e
r
t
y
u
i
o
!
qProduct ID
wSeries
rDimension (T) (Except GNM)
Code
2
Dimension (T)
0.2mm
0.3mm
0.4mm
0.5mm
0.6mm
0.7mm
0.8mm
0.85mm
1.0mm
1.25mm
1.6mm
2.0mm
2.5mm
3.2mm
1.15mm
1.35mm
1.5mm
1.8mm
2.8mm
Product ID
Code
Series
J
Soft Termination Type
Tin Plated Layer
3
M
4
5
Large Capacitance and
High Allowable Ripple Current
GR
3
6
4
7
Only for Information Devices
Only for Camera Flash Circuit
7
8
9
High Frequency for
Flow/Reflow Soldering
GQ
M
A
B
C
D
E
A
D
M
L
Monolithic Microchip
For Bonding
GM
GN
Capacitor Array
Low ESL Type
R
A
M
M
4
Controlled ESR Low ESL Type
8-termination Low ESL Type
10-termination Low ESL Type
High Frequency Low Loss Type
Low Distortion Type
F
LL
GJ
M
N
Q
R
S
8
Low Acoustic Type
Depends on individual standards.
2
For AC250V (r.m.s.)
X
GA
3
Safety Standard Certified Type
For Decoupling
rElements (GNM Only)
GW
M
Code
Elements
2-elements
4-elements
eDimensions (LgW)
2
4
Code
02
Dimensions (LgW)
0.4g0.2mm
0.6g0.3mm
0.5g0.5mm
0.8g0.8mm
0.38g0.38mm
0.9g0.6mm
1.0g0.5mm
1.6g0.8mm
1.37g1.0mm
0.6g1.0mm
2.0g1.25mm
2.8g2.8mm
3.2g1.6mm
3.2g2.5mm
4.5g2.0mm
4.5g3.2mm
5.7g2.8mm
5.7g5.0mm
EIA
01005
0201
0202
0303
015015
0302
0402
0603
0504
02404
0805
1111
1206
1210
1808
1812
2211
2220
03
05
08
0D
0M
15
18
1M
1U
21
22
31
32
42
43
52
55
Continued on the following page.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
tTemperature Characteristics
Temperature
Characteristic Codes
Temperature Characteristics
Capacitance Change Each Temperature (%)
Operating
Temperature
Range
Capacitance Change
Reference Temperature
–55°C
–25°C
–10°C
Min.
Min. Max.
Public
Code
or Temperature
Coefficient
STD Code Temperature
Range
Min.
Max.
Max.
0.49
0.33
-
–0.45
0±±0ppm/°C
0±30ppm/°C
–55 to 150°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–55 to 150°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
0.82
0C
20 to 150°C
20 to 125°C
–0.18
CHA
CG
SL
*2
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
20°C
25°C
25°C
25°C
25°C
25°C
25°C
25°C
25°C
20°C
20°C
–0.27 0.33
–0.14 0.22
0.54
–0.23
1C
1X
2C
2P
2R
2S
2T
3C
3P
3R
3S
3T
3U
4C
4P
4R
4S
4T
4U
5C
5G
6C
6P
6R
6S
6T
7U
B1
B3
–0.09
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
JIS
EIA
*2
-
-
20 to 85°C +350 to –1000ppm/°C
-
-
-
0.82
–0.45
20 to 125°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 125°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 125°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
20 to 85°C
25 to 125°C
25 to 150°C
25 to 125°C
25 to 85°C
25 to 85°C
25 to 85°C
25 to 85°C
0±±0ppm/°C
–150±±0ppm/°C
–220±±0ppm/°C
–330±±0ppm/°C
–470±±0ppm/°C
0±120ppm/°C
–0.18
0.49
1.32
1.7
2.3
3.07
0.82
1.±5
2.03
2.±3
3.4
4.94
1.54
2.3±
2.74
3.35
4.12
5.±5
0.4
0.4
0.59
1.±1
2.08
2.81
3.75
±.04
-
–0.27 0.33
CH
PH
RH
SH
-
-
0.88
1.13
1.54
2.05
0.27
0.41
0.72
1.22
1.85
-
-
0.48
-
-
0.81
-
-
1.23
TH
1.37
–0.9
–0.3±
–0.54 0.55
CJ
-
-
–150±120ppm/°C
–220±120ppm/°C
–330±120ppm/°C
–470±120ppm/°C
–750±120ppm/°C
0±250ppm/°C
1.1
0.09
0.14
0.45
0.95
1.58
2.84
PJ
-
-
1.35
1.7±
2.27
3.29
0.3
RJ
-
-
0.±3
SJ
-
-
1.05
TJ
-
-
1.89
UJ
2.5±
–1.88
–0.75
–1.13 1.02
–0.45 1.57
–0.14 1.83
CK
PK
-
-
–150±250ppm/°C
–220±250ppm/°C
–330±250ppm/°C
–470±250ppm/°C
–750±250ppm/°C
0±30ppm/°C
–0.3
-
-
–0.09
RK
SK
-
-
2.23
2.74
3.77
0.24
0.3±
0.99
2.25
-
-
0.±±
TK
-
-
1.5
UK
C0G
X8G
C0H
P2H
R2H
S2H
T2H
U2J
B *1
B
0.58
–0.24
–0.11
–0.17 0.25
–0.17 0.25
–0.33 0.38
0.58
–0.24
0±30ppm/°C
–0.11
0.87
–0.48
0±±0ppm/°C
–0.21
EIA
EIA
EIA
EIA
EIA
EIA
JIS
JIS
2.33
0.72
–150±±0ppm/°C
–220±±0ppm/°C
–330±±0ppm/°C
–470±±0ppm/°C
1.02
0.32
0.5
3.02
1.28
1.32
0.5±
0.88
4.09
1.79
0.95
1.49
2.1±
5.4±
2.39
1.44
2.2±
3.28
8.78
25 to 125°C *5 –750±120ppm/°C
2.21
3.47
3.84
5.04
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
–25 to 85°C
–25 to 85°C
–25 to 85°C
85 to 125°C
–55 to 85°C
–55 to 125°C
–55 to 105°C
–25 to 125°C
–55 to 125°C
–55 to 125°C
–55 to 105°C
–25 to 85°C
10 to 85°C
±10ꢀ
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
±10ꢀ
-
±20ꢀ
-
–25 to 125°C
C3
JIS
20°C
C
+15ꢀ, –30ꢀ
±22ꢀ
-
–55 to 85°C
–55 to 125°C
–55 to 105°C
–25 to 85°C
–55 to 125°C
–55 to 125°C
–55 to 105°C
–25 to 85°C
10 to 85°C
C6
C7
C8
D3
D6
D7
D8
E1
E4
E7
F1
F4
F5
J1
EIA
EIA
EIA
JIS
EIA
EIA
EIA
25°C
25°C
25°C
20°C
25°C
25°C
25°C
20°C
25°C
25°C
20°C
25°C
25°C
20°C
25°C
-
X5S
X7S
X6S
D
±22ꢀ
-
±22ꢀ
-
+20ꢀ, –30ꢀ
+22ꢀ, –33ꢀ
+22ꢀ, –33ꢀ
+22ꢀ, –33ꢀ
+20ꢀ, –55ꢀ
+22ꢀ, –5±ꢀ
+22ꢀ, –5±ꢀ
+30ꢀ, –80ꢀ
+22ꢀ, –82ꢀ
+22ꢀ, –82ꢀ
–20ꢀ max.
+15ꢀ, –40ꢀ
-
X5T
X7T
X6T
-
-
-
E (1/2Ur) JIS
-
Z5U
X7U
F *1
Z5V
Y5V
JA
EIA
EIA
JIS
EIA
EIA
*2
-
–55 to 125°C
–25 to 85°C
–20 to 85°C
–30 to 85°C
–25 to 105°C
–55 to 150°C
–55 to 125°C
–25 to 85°C
10 to 85°C
-
-
-
–30 to 85°C
–25 to 105°C
–55 to 150°C
-
-
L8
X8L
*2
-
*1 Capacitance change is specified with 50ꢀ rated voltage applied.
*2 Murata Temperature Characteristic Code.
*5 Rated Voltage 100Vdc max: 25 to 85°C
Continued on the following page.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Temperature
Characteristic Codes
Temperature Characteristics
Capacitance Change Each Temperature (%)
Operating
Temperature
Range
Capacitance Change
Reference Temperature
–55°C
–25°C
–10°C
Public
Code
or Temperature
Coefficient
STD Code Temperature
Range
Max. Min. Max. Min. Max. Min.
R1
R3
R6
R7
R8
R9
R *1
R
JIS
JIS
EIA
EIA
JIS
EIA
20°C
20°C
25°C
25°C
20°C
25°C
–55 to 125°C
–55 to 125°C
–55 to 85°C
–55 to 125°C
–25 to 85°C
–55 to 150°C
15ꢀ
15ꢀ
–55 to 125°C
–55 to 125°C
–55 to 85°C
–55 to 125°C
–25 to 85°C
–55 to 150°C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
X5R
X7R
R *1
X8R
15ꢀ
15ꢀ
15ꢀ
15ꢀ
10ꢀ *3
+22ꢀ, –33ꢀ *4
W0
-
*2
25°C
–55 to 125°C
–55 to 125°C
*1 Capacitance change is specified with 50ꢀ rated ꢁoltage applied.
*2 Murata Temperature Characteristic Code.
*3 Apply DC350V bias.
*4 No DC bias.
yRated Voltage
iCapacitance Tolerance
Code
0E
Rated Voltage
Code
B
Capacitance Tolerance
DC2.5V
0.1pF
0G
0J
DC4V
C
0.25pF
DC6.3V
0.5pF (10pF and below)
D
1A
1C
1E
DC10V
0.5ꢀ (10pF and oꢁer)
DC16V
F
G
J
1ꢀ
DC25V
2ꢀ
YA
1H
2A
2D
2E
DC35V
5ꢀ
DC50V
K
M
N
R
W
X
Y
Z
10ꢀ
DC100V
20ꢀ
30ꢀ
DC200V
DC250V
Depends on indiꢁidual standards.
0.05pF
YD
2W
2H
2J
DC300V
DC450V
Depends on indiꢁidual standards.
Depends on indiꢁidual standards.
+80/–20ꢀ
DC500V
DC630V
DC1kV
3A
3D
3F
oIndiꢁidual Specification Code (Except LLR)
DC2kV
Expressed by three figures.
DC3.15kV
BB
E2
DC350V (for Camera Flash Circuit)
AC250V
oESR (LLR Only)
GC
GF
GD
GB
X1/Y2; AC250V (Safety Standard Certified Type GC)
Y2, X1/Y2; AC250V (Safety Standard Certified Type GF)
Y3; AC250V (Safety Standard Certified Type GD)
X2; AC250V (Safety Standard Certified Type GB)
Code
E01
E03
E05
E07
ESR
100mΩ
220mΩ
470mΩ
1000mΩ
uCapacitance
Expressed by three-digit alphanumerics. The unit is picofarad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros which follow the two
numbers. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits.
If any alphabet, other than "R", is included, this indicates the
specific part number is a non-standard part.
!Packaging
Code
Packaging
ø180mm Embossed Taping
ø180mm Paper Taping
ø180mm Paper Taping (LLL15)
ø330mm Embossed Taping
ø330mm Paper Taping
ø330mm Paper Taping (LLL15)
Bulk
L
D
E
K
J
Ex.)
Code
R50
1R0
100
Capacitance
0.5pF
F
B
C
T
1.0pF
10pF
Bulk Case
103
10000pF
Bulk Tray
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
17
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Metal Terminal Monolithic Ceramic Capacitors
(Part Number)
KR
M
55
T
R7 2A 106
M
H01
K
q
w
e
r
t
y
u
i
o
!
qProduct ID
wSeries
rHeight Dimension (T)
Code
Dimension (T)
1.9mm
Product ID
Code
Series
F
K
L
2.7mm
Metal Terminal Monolithic Ceramic Capacitors
(DC25V to DC100V)
KR
M
2.8mm
Q
T
3.7mm
Metal Terminal Monolithic Ceramic Capacitors
Large Capacitance and High Allowable Ripple
Current Type (DC250V to DC630V)
KR
3
4.8mm
W
6.4mm
eChip Dimension (LgW)
Code
31
Chip Dimension
EIA
3.2g1.6mm
5.7g5.0mm
1206
2220
55
tTemperature Characteristics
Temperature Characteristic Codes
Temperature Characteristics
Operating
Temperature
Range
Reference
Temperature
Temperature
Range
Temperature
Coefficient
Code
Public STD Code
C8
D7
R6
R7
X6S
X7T
X5R
X7R
EIA
25°C
25°C
25°C
25°C
–55 to 105°C
–55 to 125°C
–55 to 85°C
–55 to 125°C
22ꢀ
+22/–33ꢀ
15ꢀ
–55 to 105°C
–55 to 125°C
–55 to 85°C
–55 to 125°C
EIA
EIA
EIA
15ꢀ
yRated Voltage
iCapacitance Tolerance
Code
1E
Rated Voltage
DC25V
Code
K
Capacitance Tolerance
10ꢀ
20ꢀ
1H
1J
DC50V
M
DC63V
oIndividual Specification Code
2A
2E
DC100V
DC250V
DC450V
DC630V
Expressed by three figures.
2W
2J
!Package
Code
Package
uCapacitance
K
ø330mm Embossed Taping
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
numbers.
Ex.)
Code
105
225
106
226
Capacitance
1.0μF
2.2μF
10μF
22μF
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Contents
For General Purpose GRM Series
(Less than 250Vdc)
p21
p76
Capacitor Array GNM Series
Low ESL LLL/LLR/LLA/LLM Series
High-Q Type GJM Series
p79
p82
High Frequency GQM Series
p104
p113
Monolithic Microchip GMA Series
For Bonding GMD Series
p115
p118
!Caution/Notice
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
SPECIFICATIONS AND TEST METHODS, Package, Chart of characteristic data,
please refer to the search for capacitor page website.
Search Capacitors
http://www.murata.com/products/capacitor/
Detailed specifications sheet
Rated value
SPECIFICATIONS AND TEST METHODS
Package
Caution, Notice
(Storage, Soldering and Mounting, ....etc.)
Chart of characteristic data
The main products published characteristic data.
Frequency characteristics(ESR, Impedance)
S parameter(Smith chart S11)
DC bias characteristics
AC voltage characteristics
Capacitance - temperature characteristics
Calorific property by ripple current
20
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
For General Purpose GRM Series (Less than 250Vdc)
The most widely used capacitor in the world!
Ideal capacitors can be selected from an abundant lineup.
e
g
e
T
W
L
1
2
Lineup of small size and large capacity capacitors is available.
Since the external electrodes consist of a plated structure, the product is excellent in soldering heat resistance,
and flow (GRM18/21/31 types only) and reflow soldering can be used.
High reliability with no polarity.
3
4
5
Low impedance in high frequencies, and excellent in pulse response and noise elimination.
The profile dimensions have been standardized with high precision, therefore high reliability can be acquired in the case of
automatic mounting.
6
Paper tape or embossed tape is used for the packaging, according to the chip size.
GRM15/18/21 (T = 0.6, 1.25) can also be supplied in bulk cases.
21
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
T
Rated
TC
Ultra-
Cap.
Tol.
Part Number
0.4×0.2mm
c
compact
max. Voltage Code
0.22mm 16Vdc C0G 2.2pF
0.0ꢀpF GRM0225C1C2R2WD05#
0.1pF GRM0225C1C2R2BD05#
0.2ꢀpF GRM0225C1C2R2CD05#
0.0ꢀpF GRM0225C1C2R3WD05#
0.1pF GRM0225C1C2R3BD05#
0.2ꢀpF GRM0225C1C2R3CD05#
0.0ꢀpF GRM0225C1C2R4WD05#
0.1pF GRM0225C1C2R4BD05#
0.2ꢀpF GRM0225C1C2R4CD05#
0.0ꢀpF GRM0225C1C2R5WD05#
0.1pF GRM0225C1C2R5BD05#
0.2ꢀpF GRM0225C1C2R5CD05#
0.0ꢀpF GRM0225C1C2R6WD05#
0.1pF GRM0225C1C2R6BD05#
0.2ꢀpF GRM0225C1C2R6CD05#
0.0ꢀpF GRM0225C1C2R7WD05#
0.1pF GRM0225C1C2R7BD05#
0.2ꢀpF GRM0225C1C2R7CD05#
0.0ꢀpF GRM0225C1C2R8WD05#
0.1pF GRM0225C1C2R8BD05#
0.2ꢀpF GRM0225C1C2R8CD05#
0.0ꢀpF GRM0225C1C2R9WD05#
0.1pF GRM0225C1C2R9BD05#
0.2ꢀpF GRM0225C1C2R9CD05#
0.0ꢀpF GRM0225C1C3R0WD05#
0.1pF GRM0225C1C3R0BD05#
0.2ꢀpF GRM0225C1C3R0CD05#
0.0ꢀpF GRM0225C1C3R1WD05#
0.1pF GRM0225C1C3R1BD05#
0.2ꢀpF GRM0225C1C3R1CD05#
0.0ꢀpF GRM0225C1C3R2WD05#
0.1pF GRM0225C1C3R2BD05#
0.2ꢀpF GRM0225C1C3R2CD05#
0.0ꢀpF GRM0225C1C3R3WD05#
0.1pF GRM0225C1C3R3BD05#
0.2ꢀpF GRM0225C1C3R3CD05#
0.0ꢀpF GRM0225C1C3R4WD05#
0.1pF GRM0225C1C3R4BD05#
0.2ꢀpF GRM0225C1C3R4CD05#
0.0ꢀpF GRM0225C1C3R5WD05#
0.1pF GRM0225C1C3R5BD05#
0.2ꢀpF GRM0225C1C3R5CD05#
0.0ꢀpF GRM0225C1C3R6WD05#
0.1pF GRM0225C1C3R6BD05#
0.2ꢀpF GRM0225C1C3R6CD05#
0.0ꢀpF GRM0225C1C3R7WD05#
0.1pF GRM0225C1C3R7BD05#
0.2ꢀpF GRM0225C1C3R7CD05#
0.0ꢀpF GRM0225C1C3R8WD05#
0.1pF GRM0225C1C3R8BD05#
0.2ꢀpF GRM0225C1C3R8CD05#
0.0ꢀpF GRM0225C1C3R9WD05#
0.1pF GRM0225C1C3R9BD05#
0.2ꢀpF GRM0225C1C3R9CD05#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.22mm 16Vdc C0G 0.2pF
0.0ꢀpF GRM0225C1CR20WD05#
0.1pF GRM0225C1CR20BD05#
0.0ꢀpF GRM0225C1CR30WD05#
0.1pF GRM0225C1CR30BD05#
0.0ꢀpF GRM0225C1CR40WD05#
0.1pF GRM0225C1CR40BD05#
0.0ꢀpF GRM0225C1CR50WD05#
0.1pF GRM0225C1CR50BD05#
0.0ꢀpF GRM0225C1CR60WD05#
0.1pF GRM0225C1CR60BD05#
0.0ꢀpF GRM0225C1CR70WD05#
0.1pF GRM0225C1CR70BD05#
0.0ꢀpF GRM0225C1CR80WD05#
0.1pF GRM0225C1CR80BD05#
0.0ꢀpF GRM0225C1CR90WD05#
0.1pF GRM0225C1CR90BD05#
0.0ꢀpF GRM0225C1C1R0WD05#
0.1pF GRM0225C1C1R0BD05#
0.2ꢀpF GRM0225C1C1R0CD05#
0.0ꢀpF GRM0225C1C1R1WD05#
0.1pF GRM0225C1C1R1BD05#
0.2ꢀpF GRM0225C1C1R1CD05#
0.0ꢀpF GRM0225C1C1R2WD05#
0.1pF GRM0225C1C1R2BD05#
0.2ꢀpF GRM0225C1C1R2CD05#
0.0ꢀpF GRM0225C1C1R3WD05#
0.1pF GRM0225C1C1R3BD05#
0.2ꢀpF GRM0225C1C1R3CD05#
0.0ꢀpF GRM0225C1C1R4WD05#
0.1pF GRM0225C1C1R4BD05#
0.2ꢀpF GRM0225C1C1R4CD05#
0.0ꢀpF GRM0225C1C1R5WD05#
0.1pF GRM0225C1C1R5BD05#
0.2ꢀpF GRM0225C1C1R5CD05#
0.0ꢀpF GRM0225C1C1R6WD05#
0.1pF GRM0225C1C1R6BD05#
0.2ꢀpF GRM0225C1C1R6CD05#
0.0ꢀpF GRM0225C1C1R7WD05#
0.1pF GRM0225C1C1R7BD05#
0.2ꢀpF GRM0225C1C1R7CD05#
0.0ꢀpF GRM0225C1C1R8WD05#
0.1pF GRM0225C1C1R8BD05#
0.2ꢀpF GRM0225C1C1R8CD05#
0.0ꢀpF GRM0225C1C1R9WD05#
0.1pF GRM0225C1C1R9BD05#
0.2ꢀpF GRM0225C1C1R9CD05#
0.0ꢀpF GRM0225C1C2R0WD05#
0.1pF GRM0225C1C2R0BD05#
0.2ꢀpF GRM0225C1C2R0CD05#
0.0ꢀpF GRM0225C1C2R1WD05#
0.1pF GRM0225C1C2R1BD05#
0.2ꢀpF GRM0225C1C2R1CD05#
2.3pF
2.4pF
2.ꢀpF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.ꢀpF
3.6pF
3.7pF
3.8pF
3.9pF
0.3pF
0.4pF
0.ꢀpF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.4pF
1.ꢀpF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
Part number # indicates the package specification code.
22
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc C0G 4.0pF
0.0ꢀpF GRM0225C1C4R0WD05#
0.1pF GRM0225C1C4R0BD05#
0.2ꢀpF GRM0225C1C4R0CD05#
0.0ꢀpF GRM0225C1C4R1WD05#
0.1pF GRM0225C1C4R1BD05#
0.2ꢀpF GRM0225C1C4R1CD05#
0.0ꢀpF GRM0225C1C4R2WD05#
0.1pF GRM0225C1C4R2BD05#
0.2ꢀpF GRM0225C1C4R2CD05#
0.0ꢀpF GRM0225C1C4R3WD05#
0.1pF GRM0225C1C4R3BD05#
0.2ꢀpF GRM0225C1C4R3CD05#
0.0ꢀpF GRM0225C1C4R4WD05#
0.1pF GRM0225C1C4R4BD05#
0.2ꢀpF GRM0225C1C4R4CD05#
0.0ꢀpF GRM0225C1C4R5WD05#
0.1pF GRM0225C1C4R5BD05#
0.2ꢀpF GRM0225C1C4R5CD05#
0.0ꢀpF GRM0225C1C4R6WD05#
0.1pF GRM0225C1C4R6BD05#
0.2ꢀpF GRM0225C1C4R6CD05#
0.0ꢀpF GRM0225C1C4R7WD05#
0.1pF GRM0225C1C4R7BD05#
0.2ꢀpF GRM0225C1C4R7CD05#
0.0ꢀpF GRM0225C1C4R8WD05#
0.1pF GRM0225C1C4R8BD05#
0.2ꢀpF GRM0225C1C4R8CD05#
0.0ꢀpF GRM0225C1C4R9WD05#
0.1pF GRM0225C1C4R9BD05#
0.2ꢀpF GRM0225C1C4R9CD05#
0.0ꢀpF GRM0225C1C5R0WD05#
0.1pF GRM0225C1C5R0BD05#
0.2ꢀpF GRM0225C1C5R0CD05#
0.0ꢀpF GRM0225C1C5R1WD05#
0.1pF GRM0225C1C5R1BD05#
0.2ꢀpF GRM0225C1C5R1CD05#
0.ꢀpF GRM0225C1C5R1DD05#
0.0ꢀpF GRM0225C1C5R2WD05#
0.1pF GRM0225C1C5R2BD05#
0.2ꢀpF GRM0225C1C5R2CD05#
0.ꢀpF GRM0225C1C5R2DD05#
0.0ꢀpF GRM0225C1C5R3WD05#
0.1pF GRM0225C1C5R3BD05#
0.2ꢀpF GRM0225C1C5R3CD05#
0.ꢀpF GRM0225C1C5R3DD05#
0.0ꢀpF GRM0225C1C5R4WD05#
0.1pF GRM0225C1C5R4BD05#
0.2ꢀpF GRM0225C1C5R4CD05#
0.ꢀpF GRM0225C1C5R4DD05#
0.0ꢀpF GRM0225C1C5R5WD05#
0.1pF GRM0225C1C5R5BD05#
0.2ꢀpF GRM0225C1C5R5CD05#
0.ꢀpF GRM0225C1C5R5DD05#
0.0ꢀpF GRM0225C1C5R6WD05#
0.22mm 16Vdc C0G ꢀ.6pF
0.1pF GRM0225C1C5R6BD05#
0.2ꢀpF GRM0225C1C5R6CD05#
0.ꢀpF GRM0225C1C5R6DD05#
0.0ꢀpF GRM0225C1C5R7WD05#
0.1pF GRM0225C1C5R7BD05#
0.2ꢀpF GRM0225C1C5R7CD05#
0.ꢀpF GRM0225C1C5R7DD05#
0.0ꢀpF GRM0225C1C5R8WD05#
0.1pF GRM0225C1C5R8BD05#
0.2ꢀpF GRM0225C1C5R8CD05#
0.ꢀpF GRM0225C1C5R8DD05#
0.0ꢀpF GRM0225C1C5R9WD05#
0.1pF GRM0225C1C5R9BD05#
0.2ꢀpF GRM0225C1C5R9CD05#
0.ꢀpF GRM0225C1C5R9DD05#
0.0ꢀpF GRM0225C1C6R0WD05#
0.1pF GRM0225C1C6R0BD05#
0.2ꢀpF GRM0225C1C6R0CD05#
0.ꢀpF GRM0225C1C6R0DD05#
0.0ꢀpF GRM0225C1C6R1WD05#
0.1pF GRM0225C1C6R1BD05#
0.2ꢀpF GRM0225C1C6R1CD05#
0.ꢀpF GRM0225C1C6R1DD05#
0.0ꢀpF GRM0225C1C6R2WD05#
0.1pF GRM0225C1C6R2BD05#
0.2ꢀpF GRM0225C1C6R2CD05#
0.ꢀpF GRM0225C1C6R2DD05#
0.0ꢀpF GRM0225C1C6R3WD05#
0.1pF GRM0225C1C6R3BD05#
0.2ꢀpF GRM0225C1C6R3CD05#
0.ꢀpF GRM0225C1C6R3DD05#
0.0ꢀpF GRM0225C1C6R4WD05#
0.1pF GRM0225C1C6R4BD05#
0.2ꢀpF GRM0225C1C6R4CD05#
0.ꢀpF GRM0225C1C6R4DD05#
0.0ꢀpF GRM0225C1C6R5WD05#
0.1pF GRM0225C1C6R5BD05#
0.2ꢀpF GRM0225C1C6R5CD05#
0.ꢀpF GRM0225C1C6R5DD05#
0.0ꢀpF GRM0225C1C6R6WD05#
0.1pF GRM0225C1C6R6BD05#
0.2ꢀpF GRM0225C1C6R6CD05#
0.ꢀpF GRM0225C1C6R6DD05#
0.0ꢀpF GRM0225C1C6R7WD05#
0.1pF GRM0225C1C6R7BD05#
0.2ꢀpF GRM0225C1C6R7CD05#
0.ꢀpF GRM0225C1C6R7DD05#
0.0ꢀpF GRM0225C1C6R8WD05#
0.1pF GRM0225C1C6R8BD05#
0.2ꢀpF GRM0225C1C6R8CD05#
0.ꢀpF GRM0225C1C6R8DD05#
0.0ꢀpF GRM0225C1C6R9WD05#
0.1pF GRM0225C1C6R9BD05#
0.2ꢀpF GRM0225C1C6R9CD05#
4.1pF
4.2pF
4.3pF
4.4pF
4.ꢀpF
4.6pF
4.7pF
4.8pF
4.9pF
ꢀ.0pF
ꢀ.1pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
6.0pF
6.1pF
6.2pF
6.3pF
6.4pF
6.ꢀpF
6.6pF
6.7pF
6.8pF
6.9pF
ꢀ.2pF
ꢀ.3pF
ꢀ.4pF
ꢀ.ꢀpF
ꢀ.6pF
Part number # indicates the package specification code.
23
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc C0G 6.9pF
7.0pF
0.ꢀpF GRM0225C1C6R9DD05#
0.0ꢀpF GRM0225C1C7R0WD05#
0.1pF GRM0225C1C7R0BD05#
0.2ꢀpF GRM0225C1C7R0CD05#
0.ꢀpF GRM0225C1C7R0DD05#
0.0ꢀpF GRM0225C1C7R1WD05#
0.1pF GRM0225C1C7R1BD05#
0.2ꢀpF GRM0225C1C7R1CD05#
0.ꢀpF GRM0225C1C7R1DD05#
0.0ꢀpF GRM0225C1C7R2WD05#
0.1pF GRM0225C1C7R2BD05#
0.2ꢀpF GRM0225C1C7R2CD05#
0.ꢀpF GRM0225C1C7R2DD05#
0.0ꢀpF GRM0225C1C7R3WD05#
0.1pF GRM0225C1C7R3BD05#
0.2ꢀpF GRM0225C1C7R3CD05#
0.ꢀpF GRM0225C1C7R3DD05#
0.0ꢀpF GRM0225C1C7R4WD05#
0.1pF GRM0225C1C7R4BD05#
0.2ꢀpF GRM0225C1C7R4CD05#
0.ꢀpF GRM0225C1C7R4DD05#
0.0ꢀpF GRM0225C1C7R5WD05#
0.1pF GRM0225C1C7R5BD05#
0.2ꢀpF GRM0225C1C7R5CD05#
0.ꢀpF GRM0225C1C7R5DD05#
0.0ꢀpF GRM0225C1C7R6WD05#
0.1pF GRM0225C1C7R6BD05#
0.2ꢀpF GRM0225C1C7R6CD05#
0.ꢀpF GRM0225C1C7R6DD05#
0.0ꢀpF GRM0225C1C7R7WD05#
0.1pF GRM0225C1C7R7BD05#
0.2ꢀpF GRM0225C1C7R7CD05#
0.ꢀpF GRM0225C1C7R7DD05#
0.0ꢀpF GRM0225C1C7R8WD05#
0.1pF GRM0225C1C7R8BD05#
0.2ꢀpF GRM0225C1C7R8CD05#
0.ꢀpF GRM0225C1C7R8DD05#
0.0ꢀpF GRM0225C1C7R9WD05#
0.1pF GRM0225C1C7R9BD05#
0.2ꢀpF GRM0225C1C7R9CD05#
0.ꢀpF GRM0225C1C7R9DD05#
0.0ꢀpF GRM0225C1C8R0WD05#
0.1pF GRM0225C1C8R0BD05#
0.2ꢀpF GRM0225C1C8R0CD05#
0.ꢀpF GRM0225C1C8R0DD05#
0.0ꢀpF GRM0225C1C8R1WD05#
0.1pF GRM0225C1C8R1BD05#
0.2ꢀpF GRM0225C1C8R1CD05#
0.ꢀpF GRM0225C1C8R1DD05#
0.0ꢀpF GRM0225C1C8R2WD05#
0.1pF GRM0225C1C8R2BD05#
0.2ꢀpF GRM0225C1C8R2CD05#
0.ꢀpF GRM0225C1C8R2DD05#
0.0ꢀpF GRM0225C1C8R3WD05#
0.22mm 16Vdc C0G 8.3pF
0.1pF GRM0225C1C8R3BD05#
0.2ꢀpF GRM0225C1C8R3CD05#
0.ꢀpF GRM0225C1C8R3DD05#
0.0ꢀpF GRM0225C1C8R4WD05#
0.1pF GRM0225C1C8R4BD05#
0.2ꢀpF GRM0225C1C8R4CD05#
0.ꢀpF GRM0225C1C8R4DD05#
0.0ꢀpF GRM0225C1C8R5WD05#
0.1pF GRM0225C1C8R5BD05#
0.2ꢀpF GRM0225C1C8R5CD05#
0.ꢀpF GRM0225C1C8R5DD05#
0.0ꢀpF GRM0225C1C8R6WD05#
0.1pF GRM0225C1C8R6BD05#
0.2ꢀpF GRM0225C1C8R6CD05#
0.ꢀpF GRM0225C1C8R6DD05#
0.0ꢀpF GRM0225C1C8R7WD05#
0.1pF GRM0225C1C8R7BD05#
0.2ꢀpF GRM0225C1C8R7CD05#
0.ꢀpF GRM0225C1C8R7DD05#
0.0ꢀpF GRM0225C1C8R8WD05#
0.1pF GRM0225C1C8R8BD05#
0.2ꢀpF GRM0225C1C8R8CD05#
0.ꢀpF GRM0225C1C8R8DD05#
0.0ꢀpF GRM0225C1C8R9WD05#
0.1pF GRM0225C1C8R9BD05#
0.2ꢀpF GRM0225C1C8R9CD05#
0.ꢀpF GRM0225C1C8R9DD05#
0.0ꢀpF GRM0225C1C9R0WD05#
0.1pF GRM0225C1C9R0BD05#
0.2ꢀpF GRM0225C1C9R0CD05#
0.ꢀpF GRM0225C1C9R0DD05#
0.0ꢀpF GRM0225C1C9R1WD05#
0.1pF GRM0225C1C9R1BD05#
0.2ꢀpF GRM0225C1C9R1CD05#
0.ꢀpF GRM0225C1C9R1DD05#
0.0ꢀpF GRM0225C1C9R2WD05#
0.1pF GRM0225C1C9R2BD05#
0.2ꢀpF GRM0225C1C9R2CD05#
0.ꢀpF GRM0225C1C9R2DD05#
0.0ꢀpF GRM0225C1C9R3WD05#
0.1pF GRM0225C1C9R3BD05#
0.2ꢀpF GRM0225C1C9R3CD05#
0.ꢀpF GRM0225C1C9R3DD05#
0.0ꢀpF GRM0225C1C9R4WD05#
0.1pF GRM0225C1C9R4BD05#
0.2ꢀpF GRM0225C1C9R4CD05#
0.ꢀpF GRM0225C1C9R4DD05#
0.0ꢀpF GRM0225C1C9R5WD05#
0.1pF GRM0225C1C9R5BD05#
0.2ꢀpF GRM0225C1C9R5CD05#
0.ꢀpF GRM0225C1C9R5DD05#
0.0ꢀpF GRM0225C1C9R6WD05#
0.1pF GRM0225C1C9R6BD05#
0.2ꢀpF GRM0225C1C9R6CD05#
8.4pF
7.1pF
7.2pF
7.3pF
7.4pF
7.ꢀpF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.1pF
8.2pF
8.ꢀpF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.1pF
9.2pF
9.3pF
9.4pF
9.ꢀpF
9.6pF
8.3pF
Part number # indicates the package specification code.
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc C0G 9.6pF
9.7pF
0.ꢀpF GRM0225C1C9R6DD05#
0.0ꢀpF GRM0225C1C9R7WD05#
0.1pF GRM0225C1C9R7BD05#
0.2ꢀpF GRM0225C1C9R7CD05#
0.ꢀpF GRM0225C1C9R7DD05#
0.0ꢀpF GRM0225C1C9R8WD05#
0.1pF GRM0225C1C9R8BD05#
0.2ꢀpF GRM0225C1C9R8CD05#
0.ꢀpF GRM0225C1C9R8DD05#
0.0ꢀpF GRM0225C1C9R9WD05#
0.1pF GRM0225C1C9R9BD05#
0.2ꢀpF GRM0225C1C9R9CD05#
0.ꢀpF GRM0225C1C9R9DD05#
0.22mm 16Vdc CK
1.2pF
0.1pF GRM0224C1C1R2BD05#
0.2ꢀpF GRM0224C1C1R2CD05#
0.0ꢀpF GRM0224C1C1R3WD05#
0.1pF GRM0224C1C1R3BD05#
0.2ꢀpF GRM0224C1C1R3CD05#
0.0ꢀpF GRM0224C1C1R4WD05#
0.1pF GRM0224C1C1R4BD05#
0.2ꢀpF GRM0224C1C1R4CD05#
0.0ꢀpF GRM0224C1C1R5WD05#
0.1pF GRM0224C1C1R5BD05#
0.2ꢀpF GRM0224C1C1R5CD05#
0.0ꢀpF GRM0224C1C1R6WD05#
0.1pF GRM0224C1C1R6BD05#
0.2ꢀpF GRM0224C1C1R6CD05#
0.0ꢀpF GRM0224C1C1R7WD05#
0.1pF GRM0224C1C1R7BD05#
0.2ꢀpF GRM0224C1C1R7CD05#
0.0ꢀpF GRM0224C1C1R8WD05#
0.1pF GRM0224C1C1R8BD05#
0.2ꢀpF GRM0224C1C1R8CD05#
0.0ꢀpF GRM0224C1C1R9WD05#
0.1pF GRM0224C1C1R9BD05#
0.2ꢀpF GRM0224C1C1R9CD05#
0.0ꢀpF GRM0224C1C2R0WD05#
0.1pF GRM0224C1C2R0BD05#
0.2ꢀpF GRM0224C1C2R0CD05#
0.0ꢀpF GRM0223C1C2R1WD05#
0.1pF GRM0223C1C2R1BD05#
0.2ꢀpF GRM0223C1C2R1CD05#
0.0ꢀpF GRM0223C1C2R2WD05#
0.1pF GRM0223C1C2R2BD05#
0.2ꢀpF GRM0223C1C2R2CD05#
0.0ꢀpF GRM0223C1C2R3WD05#
0.1pF GRM0223C1C2R3BD05#
0.2ꢀpF GRM0223C1C2R3CD05#
0.0ꢀpF GRM0223C1C2R4WD05#
0.1pF GRM0223C1C2R4BD05#
0.2ꢀpF GRM0223C1C2R4CD05#
0.0ꢀpF GRM0223C1C2R5WD05#
0.1pF GRM0223C1C2R5BD05#
0.2ꢀpF GRM0223C1C2R5CD05#
0.0ꢀpF GRM0223C1C2R6WD05#
0.1pF GRM0223C1C2R6BD05#
0.2ꢀpF GRM0223C1C2R6CD05#
0.0ꢀpF GRM0223C1C2R7WD05#
0.1pF GRM0223C1C2R7BD05#
0.2ꢀpF GRM0223C1C2R7CD05#
0.0ꢀpF GRM0223C1C2R8WD05#
0.1pF GRM0223C1C2R8BD05#
0.2ꢀpF GRM0223C1C2R8CD05#
0.0ꢀpF GRM0223C1C2R9WD05#
0.1pF GRM0223C1C2R9BD05#
0.2ꢀpF GRM0223C1C2R9CD05#
0.0ꢀpF GRM0223C1C3R0WD05#
1.3pF
1.4pF
1.ꢀpF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
2.2pF
2.3pF
2.4pF
2.ꢀpF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
9.8pF
9.9pF
10pF
12pF
1ꢀpF
18pF
22pF
27pF
33pF
39pF
47pF
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
GRM0225C1C100GD05#
GRM0225C1C100JD05#
GRM0225C1C120GD05#
GRM0225C1C120JD05#
GRM0225C1C150GD05#
GRM0225C1C150JD05#
GRM0225C1C180GD05#
GRM0225C1C180JD05#
GRM0225C1C220GD05#
GRM0225C1C220JD05#
GRM0225C1C270GD05#
GRM0225C1C270JD05#
GRM0225C1C330GD05#
GRM0225C1C330JD05#
GRM0225C1C390GD05#
GRM0225C1C390JD05#
GRM0225C1C470GD05#
GRM0225C1C470JD05#
CJ
CK
0.2pF
0.3pF
0.4pF
0.ꢀpF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
0.0ꢀpF GRM0224C1CR20WD05#
0.1pF GRM0224C1CR20BD05#
0.0ꢀpF GRM0224C1CR30WD05#
0.1pF GRM0224C1CR30BD05#
0.0ꢀpF GRM0224C1CR40WD05#
0.1pF GRM0224C1CR40BD05#
0.0ꢀpF GRM0224C1CR50WD05#
0.1pF GRM0224C1CR50BD05#
0.0ꢀpF GRM0224C1CR60WD05#
0.1pF GRM0224C1CR60BD05#
0.0ꢀpF GRM0224C1CR70WD05#
0.1pF GRM0224C1CR70BD05#
0.0ꢀpF GRM0224C1CR80WD05#
0.1pF GRM0224C1CR80BD05#
0.0ꢀpF GRM0224C1CR90WD05#
0.1pF GRM0224C1CR90BD05#
0.0ꢀpF GRM0224C1C1R0WD05#
0.1pF GRM0224C1C1R0BD05#
0.2ꢀpF GRM0224C1C1R0CD05#
0.0ꢀpF GRM0224C1C1R1WD05#
0.1pF GRM0224C1C1R1BD05#
0.2ꢀpF GRM0224C1C1R1CD05#
0.0ꢀpF GRM0224C1C1R2WD05#
1.1pF
1.2pF
Part number # indicates the package specification code.
2ꢀ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc
CJ
3.0pF
0.1pF GRM0223C1C3R0BD05#
0.2ꢀpF GRM0223C1C3R0CD05#
0.0ꢀpF GRM0223C1C3R1WD05#
0.1pF GRM0223C1C3R1BD05#
0.2ꢀpF GRM0223C1C3R1CD05#
0.0ꢀpF GRM0223C1C3R2WD05#
0.1pF GRM0223C1C3R2BD05#
0.2ꢀpF GRM0223C1C3R2CD05#
0.0ꢀpF GRM0223C1C3R3WD05#
0.1pF GRM0223C1C3R3BD05#
0.2ꢀpF GRM0223C1C3R3CD05#
0.0ꢀpF GRM0223C1C3R4WD05#
0.1pF GRM0223C1C3R4BD05#
0.2ꢀpF GRM0223C1C3R4CD05#
0.0ꢀpF GRM0223C1C3R5WD05#
0.1pF GRM0223C1C3R5BD05#
0.2ꢀpF GRM0223C1C3R5CD05#
0.0ꢀpF GRM0223C1C3R6WD05#
0.1pF GRM0223C1C3R6BD05#
0.2ꢀpF GRM0223C1C3R6CD05#
0.0ꢀpF GRM0223C1C3R7WD05#
0.1pF GRM0223C1C3R7BD05#
0.2ꢀpF GRM0223C1C3R7CD05#
0.0ꢀpF GRM0223C1C3R8WD05#
0.1pF GRM0223C1C3R8BD05#
0.2ꢀpF GRM0223C1C3R8CD05#
0.0ꢀpF GRM0223C1C3R9WD05#
0.1pF GRM0223C1C3R9BD05#
0.2ꢀpF GRM0223C1C3R9CD05#
0.0ꢀpF GRM0222C1C4R0WD05#
0.1pF GRM0222C1C4R0BD05#
0.2ꢀpF GRM0222C1C4R0CD05#
0.0ꢀpF GRM0222C1C4R1WD05#
0.1pF GRM0222C1C4R1BD05#
0.2ꢀpF GRM0222C1C4R1CD05#
0.0ꢀpF GRM0222C1C4R2WD05#
0.1pF GRM0222C1C4R2BD05#
0.2ꢀpF GRM0222C1C4R2CD05#
0.0ꢀpF GRM0222C1C4R3WD05#
0.1pF GRM0222C1C4R3BD05#
0.2ꢀpF GRM0222C1C4R3CD05#
0.0ꢀpF GRM0222C1C4R4WD05#
0.1pF GRM0222C1C4R4BD05#
0.2ꢀpF GRM0222C1C4R4CD05#
0.0ꢀpF GRM0222C1C4R5WD05#
0.1pF GRM0222C1C4R5BD05#
0.2ꢀpF GRM0222C1C4R5CD05#
0.0ꢀpF GRM0222C1C4R6WD05#
0.1pF GRM0222C1C4R6BD05#
0.2ꢀpF GRM0222C1C4R6CD05#
0.0ꢀpF GRM0222C1C4R7WD05#
0.1pF GRM0222C1C4R7BD05#
0.2ꢀpF GRM0222C1C4R7CD05#
0.0ꢀpF GRM0222C1C4R8WD05#
0.22mm 16Vdc CH
4.8pF
0.1pF GRM0222C1C4R8BD05#
0.2ꢀpF GRM0222C1C4R8CD05#
0.0ꢀpF GRM0222C1C4R9WD05#
0.1pF GRM0222C1C4R9BD05#
0.2ꢀpF GRM0222C1C4R9CD05#
0.0ꢀpF GRM0222C1C5R0WD05#
0.1pF GRM0222C1C5R0BD05#
0.2ꢀpF GRM0222C1C5R0CD05#
0.0ꢀpF GRM0222C1C5R1WD05#
0.1pF GRM0222C1C5R1BD05#
0.2ꢀpF GRM0222C1C5R1CD05#
0.ꢀpF GRM0222C1C5R1DD05#
0.0ꢀpF GRM0222C1C5R2WD05#
0.1pF GRM0222C1C5R2BD05#
0.2ꢀpF GRM0222C1C5R2CD05#
0.ꢀpF GRM0222C1C5R2DD05#
0.0ꢀpF GRM0222C1C5R3WD05#
0.1pF GRM0222C1C5R3BD05#
0.2ꢀpF GRM0222C1C5R3CD05#
0.ꢀpF GRM0222C1C5R3DD05#
0.0ꢀpF GRM0222C1C5R4WD05#
0.1pF GRM0222C1C5R4BD05#
0.2ꢀpF GRM0222C1C5R4CD05#
0.ꢀpF GRM0222C1C5R4DD05#
0.0ꢀpF GRM0222C1C5R5WD05#
0.1pF GRM0222C1C5R5BD05#
0.2ꢀpF GRM0222C1C5R5CD05#
0.ꢀpF GRM0222C1C5R5DD05#
0.0ꢀpF GRM0222C1C5R6WD05#
0.1pF GRM0222C1C5R6BD05#
0.2ꢀpF GRM0222C1C5R6CD05#
0.ꢀpF GRM0222C1C5R6DD05#
0.0ꢀpF GRM0222C1C5R7WD05#
0.1pF GRM0222C1C5R7BD05#
0.2ꢀpF GRM0222C1C5R7CD05#
0.ꢀpF GRM0222C1C5R7DD05#
0.0ꢀpF GRM0222C1C5R8WD05#
0.1pF GRM0222C1C5R8BD05#
0.2ꢀpF GRM0222C1C5R8CD05#
0.ꢀpF GRM0222C1C5R8DD05#
0.0ꢀpF GRM0222C1C5R9WD05#
0.1pF GRM0222C1C5R9BD05#
0.2ꢀpF GRM0222C1C5R9CD05#
0.ꢀpF GRM0222C1C5R9DD05#
0.0ꢀpF GRM0222C1C6R0WD05#
0.1pF GRM0222C1C6R0BD05#
0.2ꢀpF GRM0222C1C6R0CD05#
0.ꢀpF GRM0222C1C6R0DD05#
0.0ꢀpF GRM0222C1C6R1WD05#
0.1pF GRM0222C1C6R1BD05#
0.2ꢀpF GRM0222C1C6R1CD05#
0.ꢀpF GRM0222C1C6R1DD05#
0.0ꢀpF GRM0222C1C6R2WD05#
0.1pF GRM0222C1C6R2BD05#
3.1pF
3.2pF
3.3pF
3.4pF
3.ꢀpF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.2pF
4.3pF
4.4pF
4.ꢀpF
4.6pF
4.7pF
4.8pF
4.9pF
ꢀ.0pF
ꢀ.1pF
ꢀ.2pF
ꢀ.3pF
ꢀ.4pF
ꢀ.ꢀpF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
6.0pF
6.1pF
6.2pF
CH
Part number # indicates the package specification code.
26
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc CH
6.2pF
0.2ꢀpF GRM0222C1C6R2CD05#
0.ꢀpF GRM0222C1C6R2DD05#
0.0ꢀpF GRM0222C1C6R3WD05#
0.1pF GRM0222C1C6R3BD05#
0.2ꢀpF GRM0222C1C6R3CD05#
0.ꢀpF GRM0222C1C6R3DD05#
0.0ꢀpF GRM0222C1C6R4WD05#
0.1pF GRM0222C1C6R4BD05#
0.2ꢀpF GRM0222C1C6R4CD05#
0.ꢀpF GRM0222C1C6R4DD05#
0.0ꢀpF GRM0222C1C6R5WD05#
0.1pF GRM0222C1C6R5BD05#
0.2ꢀpF GRM0222C1C6R5CD05#
0.ꢀpF GRM0222C1C6R5DD05#
0.0ꢀpF GRM0222C1C6R6WD05#
0.1pF GRM0222C1C6R6BD05#
0.2ꢀpF GRM0222C1C6R6CD05#
0.ꢀpF GRM0222C1C6R6DD05#
0.0ꢀpF GRM0222C1C6R7WD05#
0.1pF GRM0222C1C6R7BD05#
0.2ꢀpF GRM0222C1C6R7CD05#
0.ꢀpF GRM0222C1C6R7DD05#
0.0ꢀpF GRM0222C1C6R8WD05#
0.1pF GRM0222C1C6R8BD05#
0.2ꢀpF GRM0222C1C6R8CD05#
0.ꢀpF GRM0222C1C6R8DD05#
0.0ꢀpF GRM0222C1C6R9WD05#
0.1pF GRM0222C1C6R9BD05#
0.2ꢀpF GRM0222C1C6R9CD05#
0.ꢀpF GRM0222C1C6R9DD05#
0.0ꢀpF GRM0222C1C7R0WD05#
0.1pF GRM0222C1C7R0BD05#
0.2ꢀpF GRM0222C1C7R0CD05#
0.ꢀpF GRM0222C1C7R0DD05#
0.0ꢀpF GRM0222C1C7R1WD05#
0.1pF GRM0222C1C7R1BD05#
0.2ꢀpF GRM0222C1C7R1CD05#
0.ꢀpF GRM0222C1C7R1DD05#
0.0ꢀpF GRM0222C1C7R2WD05#
0.1pF GRM0222C1C7R2BD05#
0.2ꢀpF GRM0222C1C7R2CD05#
0.ꢀpF GRM0222C1C7R2DD05#
0.0ꢀpF GRM0222C1C7R3WD05#
0.1pF GRM0222C1C7R3BD05#
0.2ꢀpF GRM0222C1C7R3CD05#
0.ꢀpF GRM0222C1C7R3DD05#
0.0ꢀpF GRM0222C1C7R4WD05#
0.1pF GRM0222C1C7R4BD05#
0.2ꢀpF GRM0222C1C7R4CD05#
0.ꢀpF GRM0222C1C7R4DD05#
0.0ꢀpF GRM0222C1C7R5WD05#
0.1pF GRM0222C1C7R5BD05#
0.2ꢀpF GRM0222C1C7R5CD05#
0.ꢀpF GRM0222C1C7R5DD05#
0.22mm 16Vdc CH
7.6pF
0.0ꢀpF GRM0222C1C7R6WD05#
0.1pF GRM0222C1C7R6BD05#
0.2ꢀpF GRM0222C1C7R6CD05#
0.ꢀpF GRM0222C1C7R6DD05#
0.0ꢀpF GRM0222C1C7R7WD05#
0.1pF GRM0222C1C7R7BD05#
0.2ꢀpF GRM0222C1C7R7CD05#
0.ꢀpF GRM0222C1C7R7DD05#
0.0ꢀpF GRM0222C1C7R8WD05#
0.1pF GRM0222C1C7R8BD05#
0.2ꢀpF GRM0222C1C7R8CD05#
0.ꢀpF GRM0222C1C7R8DD05#
0.0ꢀpF GRM0222C1C7R9WD05#
0.1pF GRM0222C1C7R9BD05#
0.2ꢀpF GRM0222C1C7R9CD05#
0.ꢀpF GRM0222C1C7R9DD05#
0.0ꢀpF GRM0222C1C8R0WD05#
0.1pF GRM0222C1C8R0BD05#
0.2ꢀpF GRM0222C1C8R0CD05#
0.ꢀpF GRM0222C1C8R0DD05#
0.0ꢀpF GRM0222C1C8R1WD05#
0.1pF GRM0222C1C8R1BD05#
0.2ꢀpF GRM0222C1C8R1CD05#
0.ꢀpF GRM0222C1C8R1DD05#
0.0ꢀpF GRM0222C1C8R2WD05#
0.1pF GRM0222C1C8R2BD05#
0.2ꢀpF GRM0222C1C8R2CD05#
0.ꢀpF GRM0222C1C8R2DD05#
0.0ꢀpF GRM0222C1C8R3WD05#
0.1pF GRM0222C1C8R3BD05#
0.2ꢀpF GRM0222C1C8R3CD05#
0.ꢀpF GRM0222C1C8R3DD05#
0.0ꢀpF GRM0222C1C8R4WD05#
0.1pF GRM0222C1C8R4BD05#
0.2ꢀpF GRM0222C1C8R4CD05#
0.ꢀpF GRM0222C1C8R4DD05#
0.0ꢀpF GRM0222C1C8R5WD05#
0.1pF GRM0222C1C8R5BD05#
0.2ꢀpF GRM0222C1C8R5CD05#
0.ꢀpF GRM0222C1C8R5DD05#
0.0ꢀpF GRM0222C1C8R6WD05#
0.1pF GRM0222C1C8R6BD05#
0.2ꢀpF GRM0222C1C8R6CD05#
0.ꢀpF GRM0222C1C8R6DD05#
0.0ꢀpF GRM0222C1C8R7WD05#
0.1pF GRM0222C1C8R7BD05#
0.2ꢀpF GRM0222C1C8R7CD05#
0.ꢀpF GRM0222C1C8R7DD05#
0.0ꢀpF GRM0222C1C8R8WD05#
0.1pF GRM0222C1C8R8BD05#
0.2ꢀpF GRM0222C1C8R8CD05#
0.ꢀpF GRM0222C1C8R8DD05#
0.0ꢀpF GRM0222C1C8R9WD05#
0.1pF GRM0222C1C8R9BD05#
6.3pF
6.4pF
6.ꢀpF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.1pF
7.2pF
7.3pF
7.4pF
7.ꢀpF
7.7pF
7.8pF
7.9pF
8.0pF
8.1pF
8.2pF
8.3pF
8.4pF
8.ꢀpF
8.6pF
8.7pF
8.8pF
8.9pF
Part number # indicates the package specification code.
27
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc CH
8.9pF
0.2ꢀpF GRM0222C1C8R9CD05#
0.ꢀpF GRM0222C1C8R9DD05#
0.0ꢀpF GRM0222C1C9R0WD05#
0.1pF GRM0222C1C9R0BD05#
0.2ꢀpF GRM0222C1C9R0CD05#
0.ꢀpF GRM0222C1C9R0DD05#
0.0ꢀpF GRM0222C1C9R1WD05#
0.1pF GRM0222C1C9R1BD05#
0.2ꢀpF GRM0222C1C9R1CD05#
0.ꢀpF GRM0222C1C9R1DD05#
0.0ꢀpF GRM0222C1C9R2WD05#
0.1pF GRM0222C1C9R2BD05#
0.2ꢀpF GRM0222C1C9R2CD05#
0.ꢀpF GRM0222C1C9R2DD05#
0.0ꢀpF GRM0222C1C9R3WD05#
0.1pF GRM0222C1C9R3BD05#
0.2ꢀpF GRM0222C1C9R3CD05#
0.ꢀpF GRM0222C1C9R3DD05#
0.0ꢀpF GRM0222C1C9R4WD05#
0.1pF GRM0222C1C9R4BD05#
0.2ꢀpF GRM0222C1C9R4CD05#
0.ꢀpF GRM0222C1C9R4DD05#
0.0ꢀpF GRM0222C1C9R5WD05#
0.1pF GRM0222C1C9R5BD05#
0.2ꢀpF GRM0222C1C9R5CD05#
0.ꢀpF GRM0222C1C9R5DD05#
0.0ꢀpF GRM0222C1C9R6WD05#
0.1pF GRM0222C1C9R6BD05#
0.2ꢀpF GRM0222C1C9R6CD05#
0.ꢀpF GRM0222C1C9R6DD05#
0.0ꢀpF GRM0222C1C9R7WD05#
0.1pF GRM0222C1C9R7BD05#
0.2ꢀpF GRM0222C1C9R7CD05#
0.ꢀpF GRM0222C1C9R7DD05#
0.0ꢀpF GRM0222C1C9R8WD05#
0.1pF GRM0222C1C9R8BD05#
0.2ꢀpF GRM0222C1C9R8CD05#
0.ꢀpF GRM0222C1C9R8DD05#
0.0ꢀpF GRM0222C1C9R9WD05#
0.1pF GRM0222C1C9R9BD05#
0.2ꢀpF GRM0222C1C9R9CD05#
0.ꢀpF GRM0222C1C9R9DD05#
0.22mm 16Vdc CH
33pF
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
GRM0222C1C330GD05#
GRM0222C1C330JD05#
GRM0222C1C390GD05#
GRM0222C1C390JD05#
GRM0222C1C470GD05#
GRM0222C1C470JD05#
GRM0225C1A560GD05#
GRM0225C1A560JD05#
GRM0225C1A680GD05#
GRM0225C1A680JD05#
GRM0225C1A820GD05#
GRM0225C1A820JD05#
GRM0225C1A101GD05#
GRM0225C1A101JD05#
GRM0222C1A560GD05#
GRM0222C1A560JD05#
GRM0222C1A680GD05#
GRM0222C1A680JD05#
GRM0222C1A820GD05#
GRM0222C1A820JD05#
GRM0222C1A101GD05#
GRM0222C1A101JD05#
9.0pF
9.1pF
9.2pF
9.3pF
9.4pF
9.ꢀpF
9.6pF
9.7pF
9.8pF
9.9pF
39pF
47pF
ꢀ6pF
68pF
82pF
100pF
ꢀ6pF
68pF
82pF
100pF
10Vdc C0G
CH
Ultra-
0.6×0.3mm
c
compact
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.33mm ꢀ0Vdc C0G 0.1pF
0.0ꢀpF GRM0335C1HR10WA01#
0.1pF GRM0335C1HR10BA01#
0.0ꢀpF GRM0335C1HR20WA01#
0.1pF GRM0335C1HR20BA01#
0.0ꢀpF GRM0335C1HR30WA01#
0.1pF GRM0335C1HR30BA01#
0.0ꢀpF GRM0335C1HR40WA01#
0.1pF GRM0335C1HR40BA01#
0.0ꢀpF GRM0335C1HR50WA01#
0.1pF GRM0335C1HR50BA01#
0.0ꢀpF GRM0335C1HR60WA01#
0.1pF GRM0335C1HR60BA01#
0.0ꢀpF GRM0335C1HR70WA01#
0.1pF GRM0335C1HR70BA01#
0.0ꢀpF GRM0335C1HR80WA01#
0.1pF GRM0335C1HR80BA01#
0.0ꢀpF GRM0335C1HR90WA01#
0.1pF GRM0335C1HR90BA01#
0.0ꢀpF GRM0335C1H1R0WA01#
0.1pF GRM0335C1H1R0BA01#
0.2ꢀpF GRM0335C1H1R0CA01#
0.0ꢀpF GRM0335C1H1R1WA01#
0.1pF GRM0335C1H1R1BA01#
0.2ꢀpF GRM0335C1H1R1CA01#
0.0ꢀpF GRM0335C1H1R2WA01#
0.1pF GRM0335C1H1R2BA01#
0.2ꢀpF GRM0335C1H1R2CA01#
0.2pF
0.3pF
0.4pF
0.ꢀpF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
10pF
12pF
1ꢀpF
18pF
22pF
27pF
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
2ꢁ
ꢀꢁ
GRM0222C1C100GD05#
GRM0222C1C100JD05#
GRM0222C1C120GD05#
GRM0222C1C120JD05#
GRM0222C1C150GD05#
GRM0222C1C150JD05#
GRM0222C1C180GD05#
GRM0222C1C180JD05#
GRM0222C1C220GD05#
GRM0222C1C220JD05#
GRM0222C1C270GD05#
GRM0222C1C270JD05#
1.1pF
1.2pF
Part number # indicates the package specification code.
28
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc C0G 1.3pF
0.05pF GRM0335C1H1R3WA01#
0.1pF GRM0335C1H1R3BA01#
0.ꢀ5pF GRM0335C1H1R3CA01#
0.05pF GRM0335C1H1R4WA01#
0.1pF GRM0335C1H1R4BA01#
0.ꢀ5pF GRM0335C1H1R4CA01#
0.05pF GRM0335C1H1R5WA01#
0.1pF GRM0335C1H1R5BA01#
0.ꢀ5pF GRM0335C1H1R5CA01#
0.05pF GRM0335C1H1R6WA01#
0.1pF GRM0335C1H1R6BA01#
0.ꢀ5pF GRM0335C1H1R6CA01#
0.05pF GRM0335C1H1R7WA01#
0.1pF GRM0335C1H1R7BA01#
0.ꢀ5pF GRM0335C1H1R7CA01#
0.05pF GRM0335C1H1R8WA01#
0.1pF GRM0335C1H1R8BA01#
0.ꢀ5pF GRM0335C1H1R8CA01#
0.05pF GRM0335C1H1R9WA01#
0.1pF GRM0335C1H1R9BA01#
0.ꢀ5pF GRM0335C1H1R9CA01#
0.05pF GRM0335C1H2R0WA01#
0.1pF GRM0335C1H2R0BA01#
0.ꢀ5pF GRM0335C1H2R0CA01#
0.05pF GRM0335C1H2R1WA01#
0.1pF GRM0335C1H2R1BA01#
0.ꢀ5pF GRM0335C1H2R1CA01#
0.05pF GRM0335C1H2R2WA01#
0.1pF GRM0335C1H2R2BA01#
0.ꢀ5pF GRM0335C1H2R2CA01#
0.05pF GRM0335C1H2R3WA01#
0.1pF GRM0335C1H2R3BA01#
0.ꢀ5pF GRM0335C1H2R3CA01#
0.05pF GRM0335C1H2R4WA01#
0.1pF GRM0335C1H2R4BA01#
0.ꢀ5pF GRM0335C1H2R4CA01#
0.05pF GRM0335C1H2R5WA01#
0.1pF GRM0335C1H2R5BA01#
0.ꢀ5pF GRM0335C1H2R5CA01#
0.05pF GRM0335C1H2R6WA01#
0.1pF GRM0335C1H2R6BA01#
0.ꢀ5pF GRM0335C1H2R6CA01#
0.05pF GRM0335C1H2R7WA01#
0.1pF GRM0335C1H2R7BA01#
0.ꢀ5pF GRM0335C1H2R7CA01#
0.05pF GRM0335C1H2R8WA01#
0.1pF GRM0335C1H2R8BA01#
0.ꢀ5pF GRM0335C1H2R8CA01#
0.05pF GRM0335C1H2R9WA01#
0.1pF GRM0335C1H2R9BA01#
0.ꢀ5pF GRM0335C1H2R9CA01#
0.05pF GRM0335C1H3R0WA01#
0.1pF GRM0335C1H3R0BA01#
0.ꢀ5pF GRM0335C1H3R0CA01#
0.33mm 50Vdc C0G 3.1pF
0.05pF GRM0335C1H3R1WA01#
0.1pF GRM0335C1H3R1BA01#
0.ꢀ5pF GRM0335C1H3R1CA01#
0.05pF GRM0335C1H3R2WA01#
0.1pF GRM0335C1H3R2BA01#
0.ꢀ5pF GRM0335C1H3R2CA01#
0.05pF GRM0335C1H3R3WA01#
0.1pF GRM0335C1H3R3BA01#
0.ꢀ5pF GRM0335C1H3R3CA01#
0.05pF GRM0335C1H3R4WA01#
0.1pF GRM0335C1H3R4BA01#
0.ꢀ5pF GRM0335C1H3R4CA01#
0.05pF GRM0335C1H3R5WA01#
0.1pF GRM0335C1H3R5BA01#
0.ꢀ5pF GRM0335C1H3R5CA01#
0.05pF GRM0335C1H3R6WA01#
0.1pF GRM0335C1H3R6BA01#
0.ꢀ5pF GRM0335C1H3R6CA01#
0.05pF GRM0335C1H3R7WA01#
0.1pF GRM0335C1H3R7BA01#
0.ꢀ5pF GRM0335C1H3R7CA01#
0.05pF GRM0335C1H3R8WA01#
0.1pF GRM0335C1H3R8BA01#
0.ꢀ5pF GRM0335C1H3R8CA01#
0.05pF GRM0335C1H3R9WA01#
0.1pF GRM0335C1H3R9BA01#
0.ꢀ5pF GRM0335C1H3R9CA01#
0.05pF GRM0335C1H4R0WA01#
0.1pF GRM0335C1H4R0BA01#
0.ꢀ5pF GRM0335C1H4R0CA01#
0.05pF GRM0335C1H4R1WA01#
0.1pF GRM0335C1H4R1BA01#
0.ꢀ5pF GRM0335C1H4R1CA01#
0.05pF GRM0335C1H4R2WA01#
0.1pF GRM0335C1H4R2BA01#
0.ꢀ5pF GRM0335C1H4R2CA01#
0.05pF GRM0335C1H4R3WA01#
0.1pF GRM0335C1H4R3BA01#
0.ꢀ5pF GRM0335C1H4R3CA01#
0.05pF GRM0335C1H4R4WA01#
0.1pF GRM0335C1H4R4BA01#
0.ꢀ5pF GRM0335C1H4R4CA01#
0.05pF GRM0335C1H4R5WA01#
0.1pF GRM0335C1H4R5BA01#
0.ꢀ5pF GRM0335C1H4R5CA01#
0.05pF GRM0335C1H4R6WA01#
0.1pF GRM0335C1H4R6BA01#
0.ꢀ5pF GRM0335C1H4R6CA01#
0.05pF GRM0335C1H4R7WA01#
0.1pF GRM0335C1H4R7BA01#
0.ꢀ5pF GRM0335C1H4R7CA01#
0.05pF GRM0335C1H4R8WA01#
0.1pF GRM0335C1H4R8BA01#
0.ꢀ5pF GRM0335C1H4R8CA01#
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
ꢀ.0pF
ꢀ.1pF
ꢀ.ꢀpF
ꢀ.3pF
ꢀ.4pF
ꢀ.5pF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
3.0pF
3.ꢀpF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.ꢀpF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
Part number # indicates the package specification code.
ꢀ9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc C0G 4.9pF
0.05pF GRM0335C1H4R9WA01#
0.ꢀpF GRM0335C1H4R9BA01#
0.ꢁ5pF GRM0335C1H4R9CA01#
0.05pF GRM0335C1H5R0WA01#
0.ꢀpF GRM0335C1H5R0BA01#
0.ꢁ5pF GRM0335C1H5R0CA01#
0.05pF GRM0335C1H5R1WA01#
0.ꢀpF GRM0335C1H5R1BA01#
0.ꢁ5pF GRM0335C1H5R1CA01#
0.5pF GRM0335C1H5R1DA01#
0.05pF GRM0335C1H5R2WA01#
0.ꢀpF GRM0335C1H5R2BA01#
0.ꢁ5pF GRM0335C1H5R2CA01#
0.5pF GRM0335C1H5R2DA01#
0.05pF GRM0335C1H5R3WA01#
0.ꢀpF GRM0335C1H5R3BA01#
0.ꢁ5pF GRM0335C1H5R3CA01#
0.5pF GRM0335C1H5R3DA01#
0.05pF GRM0335C1H5R4WA01#
0.ꢀpF GRM0335C1H5R4BA01#
0.ꢁ5pF GRM0335C1H5R4CA01#
0.5pF GRM0335C1H5R4DA01#
0.05pF GRM0335C1H5R5WA01#
0.ꢀpF GRM0335C1H5R5BA01#
0.ꢁ5pF GRM0335C1H5R5CA01#
0.5pF GRM0335C1H5R5DA01#
0.05pF GRM0335C1H5R6WA01#
0.ꢀpF GRM0335C1H5R6BA01#
0.ꢁ5pF GRM0335C1H5R6CA01#
0.5pF GRM0335C1H5R6DA01#
0.05pF GRM0335C1H5R7WA01#
0.ꢀpF GRM0335C1H5R7BA01#
0.ꢁ5pF GRM0335C1H5R7CA01#
0.5pF GRM0335C1H5R7DA01#
0.05pF GRM0335C1H5R8WA01#
0.ꢀpF GRM0335C1H5R8BA01#
0.ꢁ5pF GRM0335C1H5R8CA01#
0.5pF GRM0335C1H5R8DA01#
0.05pF GRM0335C1H5R9WA01#
0.ꢀpF GRM0335C1H5R9BA01#
0.ꢁ5pF GRM0335C1H5R9CA01#
0.5pF GRM0335C1H5R9DA01#
0.05pF GRM0335C1H6R0WA01#
0.ꢀpF GRM0335C1H6R0BA01#
0.ꢁ5pF GRM0335C1H6R0CA01#
0.5pF GRM0335C1H6R0DA01#
0.05pF GRM0335C1H6R1WA01#
0.ꢀpF GRM0335C1H6R1BA01#
0.ꢁ5pF GRM0335C1H6R1CA01#
0.5pF GRM0335C1H6R1DA01#
0.05pF GRM0335C1H6R2WA01#
0.ꢀpF GRM0335C1H6R2BA01#
0.ꢁ5pF GRM0335C1H6R2CA01#
0.5pF GRM0335C1H6R2DA01#
0.33mm 50Vdc C0G 6.3pF
0.05pF GRM0335C1H6R3WA01#
0.ꢀpF GRM0335C1H6R3BA01#
0.ꢁ5pF GRM0335C1H6R3CA01#
0.5pF GRM0335C1H6R3DA01#
0.05pF GRM0335C1H6R4WA01#
0.ꢀpF GRM0335C1H6R4BA01#
0.ꢁ5pF GRM0335C1H6R4CA01#
0.5pF GRM0335C1H6R4DA01#
0.05pF GRM0335C1H6R5WA01#
0.ꢀpF GRM0335C1H6R5BA01#
0.ꢁ5pF GRM0335C1H6R5CA01#
0.5pF GRM0335C1H6R5DA01#
0.05pF GRM0335C1H6R6WA01#
0.ꢀpF GRM0335C1H6R6BA01#
0.ꢁ5pF GRM0335C1H6R6CA01#
0.5pF GRM0335C1H6R6DA01#
0.05pF GRM0335C1H6R7WA01#
0.ꢀpF GRM0335C1H6R7BA01#
0.ꢁ5pF GRM0335C1H6R7CA01#
0.5pF GRM0335C1H6R7DA01#
0.05pF GRM0335C1H6R8WA01#
0.ꢀpF GRM0335C1H6R8BA01#
0.ꢁ5pF GRM0335C1H6R8CA01#
0.5pF GRM0335C1H6R8DA01#
0.05pF GRM0335C1H6R9WA01#
0.ꢀpF GRM0335C1H6R9BA01#
0.ꢁ5pF GRM0335C1H6R9CA01#
0.5pF GRM0335C1H6R9DA01#
0.05pF GRM0335C1H7R0WA01#
0.ꢀpF GRM0335C1H7R0BA01#
0.ꢁ5pF GRM0335C1H7R0CA01#
0.5pF GRM0335C1H7R0DA01#
0.05pF GRM0335C1H7R1WA01#
0.ꢀpF GRM0335C1H7R1BA01#
0.ꢁ5pF GRM0335C1H7R1CA01#
0.5pF GRM0335C1H7R1DA01#
0.05pF GRM0335C1H7R2WA01#
0.ꢀpF GRM0335C1H7R2BA01#
0.ꢁ5pF GRM0335C1H7R2CA01#
0.5pF GRM0335C1H7R2DA01#
0.05pF GRM0335C1H7R3WA01#
0.ꢀpF GRM0335C1H7R3BA01#
0.ꢁ5pF GRM0335C1H7R3CA01#
0.5pF GRM0335C1H7R3DA01#
0.05pF GRM0335C1H7R4WA01#
0.ꢀpF GRM0335C1H7R4BA01#
0.ꢁ5pF GRM0335C1H7R4CA01#
0.5pF GRM0335C1H7R4DA01#
0.05pF GRM0335C1H7R5WA01#
0.ꢀpF GRM0335C1H7R5BA01#
0.ꢁ5pF GRM0335C1H7R5CA01#
0.5pF GRM0335C1H7R5DA01#
0.05pF GRM0335C1H7R6WA01#
0.ꢀpF GRM0335C1H7R6BA01#
5.0pF
5.ꢀpF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.ꢀpF
7.ꢁpF
7.3pF
7.4pF
7.5pF
7.6pF
5.ꢁpF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
6.ꢁpF
Part number # indicates the package specification code.
30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.ꢁ,ꢀ0ꢁꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc C0G 7.6pF
7.7pF
0.ꢀ5pF GRM0335C1H7R6CA01#
0.5pF GRM0335C1H7R6DA01#
0.05pF GRM0335C1H7R7WA01#
0.ꢁpF GRM0335C1H7R7BA01#
0.ꢀ5pF GRM0335C1H7R7CA01#
0.5pF GRM0335C1H7R7DA01#
0.05pF GRM0335C1H7R8WA01#
0.ꢁpF GRM0335C1H7R8BA01#
0.ꢀ5pF GRM0335C1H7R8CA01#
0.5pF GRM0335C1H7R8DA01#
0.05pF GRM0335C1H7R9WA01#
0.ꢁpF GRM0335C1H7R9BA01#
0.ꢀ5pF GRM0335C1H7R9CA01#
0.5pF GRM0335C1H7R9DA01#
0.05pF GRM0335C1H8R0WA01#
0.ꢁpF GRM0335C1H8R0BA01#
0.ꢀ5pF GRM0335C1H8R0CA01#
0.5pF GRM0335C1H8R0DA01#
0.05pF GRM0335C1H8R1WA01#
0.ꢁpF GRM0335C1H8R1BA01#
0.ꢀ5pF GRM0335C1H8R1CA01#
0.5pF GRM0335C1H8R1DA01#
0.05pF GRM0335C1H8R2WA01#
0.ꢁpF GRM0335C1H8R2BA01#
0.ꢀ5pF GRM0335C1H8R2CA01#
0.5pF GRM0335C1H8R2DA01#
0.05pF GRM0335C1H8R3WA01#
0.ꢁpF GRM0335C1H8R3BA01#
0.ꢀ5pF GRM0335C1H8R3CA01#
0.5pF GRM0335C1H8R3DA01#
0.05pF GRM0335C1H8R4WA01#
0.ꢁpF GRM0335C1H8R4BA01#
0.ꢀ5pF GRM0335C1H8R4CA01#
0.5pF GRM0335C1H8R4DA01#
0.05pF GRM0335C1H8R5WA01#
0.ꢁpF GRM0335C1H8R5BA01#
0.ꢀ5pF GRM0335C1H8R5CA01#
0.5pF GRM0335C1H8R5DA01#
0.05pF GRM0335C1H8R6WA01#
0.ꢁpF GRM0335C1H8R6BA01#
0.ꢀ5pF GRM0335C1H8R6CA01#
0.5pF GRM0335C1H8R6DA01#
0.05pF GRM0335C1H8R7WA01#
0.ꢁpF GRM0335C1H8R7BA01#
0.ꢀ5pF GRM0335C1H8R7CA01#
0.5pF GRM0335C1H8R7DA01#
0.05pF GRM0335C1H8R8WA01#
0.ꢁpF GRM0335C1H8R8BA01#
0.ꢀ5pF GRM0335C1H8R8CA01#
0.5pF GRM0335C1H8R8DA01#
0.05pF GRM0335C1H8R9WA01#
0.ꢁpF GRM0335C1H8R9BA01#
0.ꢀ5pF GRM0335C1H8R9CA01#
0.5pF GRM0335C1H8R9DA01#
0.33mm 50Vdc C0G 9.0pF
0.05pF GRM0335C1H9R0WA01#
0.ꢁpF GRM0335C1H9R0BA01#
0.ꢀ5pF GRM0335C1H9R0CA01#
0.5pF GRM0335C1H9R0DA01#
0.05pF GRM0335C1H9R1WA01#
0.ꢁpF GRM0335C1H9R1BA01#
0.ꢀ5pF GRM0335C1H9R1CA01#
0.5pF GRM0335C1H9R1DA01#
0.05pF GRM0335C1H9R2WA01#
0.ꢁpF GRM0335C1H9R2BA01#
0.ꢀ5pF GRM0335C1H9R2CA01#
0.5pF GRM0335C1H9R2DA01#
0.05pF GRM0335C1H9R3WA01#
0.ꢁpF GRM0335C1H9R3BA01#
0.ꢀ5pF GRM0335C1H9R3CA01#
0.5pF GRM0335C1H9R3DA01#
0.05pF GRM0335C1H9R4WA01#
0.ꢁpF GRM0335C1H9R4BA01#
0.ꢀ5pF GRM0335C1H9R4CA01#
0.5pF GRM0335C1H9R4DA01#
0.05pF GRM0335C1H9R5WA01#
0.ꢁpF GRM0335C1H9R5BA01#
0.ꢀ5pF GRM0335C1H9R5CA01#
0.5pF GRM0335C1H9R5DA01#
0.05pF GRM0335C1H9R6WA01#
0.ꢁpF GRM0335C1H9R6BA01#
0.ꢀ5pF GRM0335C1H9R6CA01#
0.5pF GRM0335C1H9R6DA01#
0.05pF GRM0335C1H9R7WA01#
0.ꢁpF GRM0335C1H9R7BA01#
0.ꢀ5pF GRM0335C1H9R7CA01#
0.5pF GRM0335C1H9R7DA01#
0.05pF GRM0335C1H9R8WA01#
0.ꢁpF GRM0335C1H9R8BA01#
0.ꢀ5pF GRM0335C1H9R8CA01#
0.5pF GRM0335C1H9R8DA01#
0.05pF GRM0335C1H9R9WA01#
0.ꢁpF GRM0335C1H9R9BA01#
0.ꢀ5pF GRM0335C1H9R9CA01#
0.5pF GRM0335C1H9R9DA01#
9.ꢁpF
9.ꢀpF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
7.8pF
7.9pF
8.0pF
8.ꢁpF
8.ꢀpF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
ꢁ0pF
ꢁꢀpF
ꢁ5pF
ꢁ8pF
ꢀꢀpF
ꢀ7pF
33pF
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
GRM0335C1H100GA01#
GRM0335C1H100JA01#
GRM0335C1H120GA01#
GRM0335C1H120JA01#
GRM0335C1H150GA01#
GRM0335C1H150JA01#
GRM0335C1H180GA01#
GRM0335C1H180JA01#
GRM0335C1H220GA01#
GRM0335C1H220JA01#
GRM0335C1H270GA01#
GRM0335C1H270JA01#
GRM0335C1H330GA01#
GRM0335C1H330JA01#
Part number # indicates the package specification code.
3ꢁ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc C0G
39pF
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
GRM0335C1H390GA01#
GRM0335C1H390JA01#
GRM0335C1H470GA01#
GRM0335C1H470JA01#
GRM0335C1H560GA01#
GRM0335C1H560JA01#
GRM0335C1H680GA01#
GRM0335C1H680JA01#
GRM0335C1H820GA01#
GRM0335C1H820JA01#
GRM0335C1H101GA01#
GRM0335C1H101JA01#
0.33mm 50Vdc CK
1.8pF ±0.05pF GRM0334C1H1R8WA01#
±0.1pF GRM0334C1H1R8BA01#
47pF
56pF
68pF
8±pF
100pF
±0.±5pF GRM0334C1H1R8CA01#
1.9pF ±0.05pF GRM0334C1H1R9WA01#
±0.1pF GRM0334C1H1R9BA01#
±0.±5pF GRM0334C1H1R9CA01#
±.0pF ±0.05pF GRM0334C1H2R0WA01#
±0.1pF GRM0334C1H2R0BA01#
±0.±5pF GRM0334C1H2R0CA01#
±.1pF ±0.05pF GRM0333C1H2R1WA01#
±0.1pF GRM0333C1H2R1BA01#
CJ
±0.±5pF GRM0333C1H2R1CA01#
±.±pF ±0.05pF GRM0333C1H2R2WA01#
±0.1pF GRM0333C1H2R2BA01#
CK
0.1pF ±0.05pF GRM0334C1HR10WA01#
±0.1pF GRM0334C1HR10BA01#
0.±pF ±0.05pF GRM0334C1HR20WA01#
±0.1pF GRM0334C1HR20BA01#
±0.±5pF GRM0333C1H2R2CA01#
±.3pF ±0.05pF GRM0333C1H2R3WA01#
±0.1pF GRM0333C1H2R3BA01#
0.3pF ±0.05pF GRM0334C1HR30WA01#
±0.1pF GRM0334C1HR30BA01#
±0.±5pF GRM0333C1H2R3CA01#
±.4pF ±0.05pF GRM0333C1H2R4WA01#
±0.1pF GRM0333C1H2R4BA01#
0.4pF ±0.05pF GRM0334C1HR40WA01#
±0.1pF GRM0334C1HR40BA01#
0.5pF ±0.05pF GRM0334C1HR50WA01#
±0.1pF GRM0334C1HR50BA01#
±0.±5pF GRM0333C1H2R4CA01#
±.5pF ±0.05pF GRM0333C1H2R5WA01#
±0.1pF GRM0333C1H2R5BA01#
0.6pF ±0.05pF GRM0334C1HR60WA01#
±0.1pF GRM0334C1HR60BA01#
±0.±5pF GRM0333C1H2R5CA01#
±.6pF ±0.05pF GRM0333C1H2R6WA01#
±0.1pF GRM0333C1H2R6BA01#
0.7pF ±0.05pF GRM0334C1HR70WA01#
±0.1pF GRM0334C1HR70BA01#
0.8pF ±0.05pF GRM0334C1HR80WA01#
±0.1pF GRM0334C1HR80BA01#
±0.±5pF GRM0333C1H2R6CA01#
±.7pF ±0.05pF GRM0333C1H2R7WA01#
±0.1pF GRM0333C1H2R7BA01#
0.9pF ±0.05pF GRM0334C1HR90WA01#
±0.1pF GRM0334C1HR90BA01#
±0.±5pF GRM0333C1H2R7CA01#
±.8pF ±0.05pF GRM0333C1H2R8WA01#
±0.1pF GRM0333C1H2R8BA01#
1.0pF ±0.05pF GRM0334C1H1R0WA01#
±0.1pF GRM0334C1H1R0BA01#
±0.±5pF GRM0334C1H1R0CA01#
±0.±5pF GRM0333C1H2R8CA01#
±.9pF ±0.05pF GRM0333C1H2R9WA01#
±0.1pF GRM0333C1H2R9BA01#
1.1pF ±0.05pF GRM0334C1H1R1WA01#
±0.1pF GRM0334C1H1R1BA01#
±0.±5pF GRM0334C1H1R1CA01#
±0.±5pF GRM0333C1H2R9CA01#
3.0pF ±0.05pF GRM0333C1H3R0WA01#
±0.1pF GRM0333C1H3R0BA01#
1.±pF ±0.05pF GRM0334C1H1R2WA01#
±0.1pF GRM0334C1H1R2BA01#
±0.±5pF GRM0334C1H1R2CA01#
±0.±5pF GRM0333C1H3R0CA01#
3.1pF ±0.05pF GRM0333C1H3R1WA01#
±0.1pF GRM0333C1H3R1BA01#
1.3pF ±0.05pF GRM0334C1H1R3WA01#
±0.1pF GRM0334C1H1R3BA01#
±0.±5pF GRM0334C1H1R3CA01#
±0.±5pF GRM0333C1H3R1CA01#
3.±pF ±0.05pF GRM0333C1H3R2WA01#
±0.1pF GRM0333C1H3R2BA01#
1.4pF ±0.05pF GRM0334C1H1R4WA01#
±0.1pF GRM0334C1H1R4BA01#
±0.±5pF GRM0334C1H1R4CA01#
±0.±5pF GRM0333C1H3R2CA01#
3.3pF ±0.05pF GRM0333C1H3R3WA01#
±0.1pF GRM0333C1H3R3BA01#
1.5pF ±0.05pF GRM0334C1H1R5WA01#
±0.1pF GRM0334C1H1R5BA01#
±0.±5pF GRM0334C1H1R5CA01#
±0.±5pF GRM0333C1H3R3CA01#
3.4pF ±0.05pF GRM0333C1H3R4WA01#
±0.1pF GRM0333C1H3R4BA01#
1.6pF ±0.05pF GRM0334C1H1R6WA01#
±0.1pF GRM0334C1H1R6BA01#
±0.±5pF GRM0334C1H1R6CA01#
±0.±5pF GRM0333C1H3R4CA01#
3.5pF ±0.05pF GRM0333C1H3R5WA01#
±0.1pF GRM0333C1H3R5BA01#
1.7pF ±0.05pF GRM0334C1H1R7WA01#
±0.1pF GRM0334C1H1R7BA01#
±0.±5pF GRM0334C1H1R7CA01#
±0.±5pF GRM0333C1H3R5CA01#
Part number # indicates the package specification code.
3±
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc
CJ
3.6pF
0.05pF GRM0333C1H3R6WA01#
0.ꢀpF GRM0333C1H3R6BA01#
0.ꢁ5pF GRM0333C1H3R6CA01#
0.05pF GRM0333C1H3R7WA01#
0.ꢀpF GRM0333C1H3R7BA01#
0.ꢁ5pF GRM0333C1H3R7CA01#
0.05pF GRM0333C1H3R8WA01#
0.ꢀpF GRM0333C1H3R8BA01#
0.ꢁ5pF GRM0333C1H3R8CA01#
0.05pF GRM0333C1H3R9WA01#
0.ꢀpF GRM0333C1H3R9BA01#
0.ꢁ5pF GRM0333C1H3R9CA01#
0.05pF GRM0332C1H4R0WA01#
0.ꢀpF GRM0332C1H4R0BA01#
0.ꢁ5pF GRM0332C1H4R0CA01#
0.05pF GRM0332C1H4R1WA01#
0.ꢀpF GRM0332C1H4R1BA01#
0.ꢁ5pF GRM0332C1H4R1CA01#
0.05pF GRM0332C1H4R2WA01#
0.ꢀpF GRM0332C1H4R2BA01#
0.ꢁ5pF GRM0332C1H4R2CA01#
0.05pF GRM0332C1H4R3WA01#
0.ꢀpF GRM0332C1H4R3BA01#
0.ꢁ5pF GRM0332C1H4R3CA01#
0.05pF GRM0332C1H4R4WA01#
0.ꢀpF GRM0332C1H4R4BA01#
0.ꢁ5pF GRM0332C1H4R4CA01#
0.05pF GRM0332C1H4R5WA01#
0.ꢀpF GRM0332C1H4R5BA01#
0.ꢁ5pF GRM0332C1H4R5CA01#
0.05pF GRM0332C1H4R6WA01#
0.ꢀpF GRM0332C1H4R6BA01#
0.ꢁ5pF GRM0332C1H4R6CA01#
0.05pF GRM0332C1H4R7WA01#
0.ꢀpF GRM0332C1H4R7BA01#
0.ꢁ5pF GRM0332C1H4R7CA01#
0.05pF GRM0332C1H4R8WA01#
0.ꢀpF GRM0332C1H4R8BA01#
0.ꢁ5pF GRM0332C1H4R8CA01#
0.05pF GRM0332C1H4R9WA01#
0.ꢀpF GRM0332C1H4R9BA01#
0.ꢁ5pF GRM0332C1H4R9CA01#
0.05pF GRM0332C1H5R0WA01#
0.ꢀpF GRM0332C1H5R0BA01#
0.ꢁ5pF GRM0332C1H5R0CA01#
0.05pF GRM0332C1H5R1WA01#
0.ꢀpF GRM0332C1H5R1BA01#
0.ꢁ5pF GRM0332C1H5R1CA01#
0.5pF GRM0332C1H5R1DA01#
0.05pF GRM0332C1H5R2WA01#
0.ꢀpF GRM0332C1H5R2BA01#
0.ꢁ5pF GRM0332C1H5R2CA01#
0.5pF GRM0332C1H5R2DA01#
0.05pF GRM0332C1H5R3WA01#
0.33mm 50Vdc CH
5.3pF
0.ꢀpF GRM0332C1H5R3BA01#
0.ꢁ5pF GRM0332C1H5R3CA01#
0.5pF GRM0332C1H5R3DA01#
0.05pF GRM0332C1H5R4WA01#
0.ꢀpF GRM0332C1H5R4BA01#
0.ꢁ5pF GRM0332C1H5R4CA01#
0.5pF GRM0332C1H5R4DA01#
0.05pF GRM0332C1H5R5WA01#
0.ꢀpF GRM0332C1H5R5BA01#
0.ꢁ5pF GRM0332C1H5R5CA01#
0.5pF GRM0332C1H5R5DA01#
0.05pF GRM0332C1H5R6WA01#
0.ꢀpF GRM0332C1H5R6BA01#
0.ꢁ5pF GRM0332C1H5R6CA01#
0.5pF GRM0332C1H5R6DA01#
0.05pF GRM0332C1H5R7WA01#
0.ꢀpF GRM0332C1H5R7BA01#
0.ꢁ5pF GRM0332C1H5R7CA01#
0.5pF GRM0332C1H5R7DA01#
0.05pF GRM0332C1H5R8WA01#
0.ꢀpF GRM0332C1H5R8BA01#
0.ꢁ5pF GRM0332C1H5R8CA01#
0.5pF GRM0332C1H5R8DA01#
0.05pF GRM0332C1H5R9WA01#
0.ꢀpF GRM0332C1H5R9BA01#
0.ꢁ5pF GRM0332C1H5R9CA01#
0.5pF GRM0332C1H5R9DA01#
0.05pF GRM0332C1H6R0WA01#
0.ꢀpF GRM0332C1H6R0BA01#
0.ꢁ5pF GRM0332C1H6R0CA01#
0.5pF GRM0332C1H6R0DA01#
0.05pF GRM0332C1H6R1WA01#
0.ꢀpF GRM0332C1H6R1BA01#
0.ꢁ5pF GRM0332C1H6R1CA01#
0.5pF GRM0332C1H6R1DA01#
0.05pF GRM0332C1H6R2WA01#
0.ꢀpF GRM0332C1H6R2BA01#
0.ꢁ5pF GRM0332C1H6R2CA01#
0.5pF GRM0332C1H6R2DA01#
0.05pF GRM0332C1H6R3WA01#
0.ꢀpF GRM0332C1H6R3BA01#
0.ꢁ5pF GRM0332C1H6R3CA01#
0.5pF GRM0332C1H6R3DA01#
0.05pF GRM0332C1H6R4WA01#
0.ꢀpF GRM0332C1H6R4BA01#
0.ꢁ5pF GRM0332C1H6R4CA01#
0.5pF GRM0332C1H6R4DA01#
0.05pF GRM0332C1H6R5WA01#
0.ꢀpF GRM0332C1H6R5BA01#
0.ꢁ5pF GRM0332C1H6R5CA01#
0.5pF GRM0332C1H6R5DA01#
0.05pF GRM0332C1H6R6WA01#
0.ꢀpF GRM0332C1H6R6BA01#
0.ꢁ5pF GRM0332C1H6R6CA01#
3.7pF
3.8pF
3.9pF
4.0pF
4.ꢀpF
4.ꢁpF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
5.ꢀpF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
6.ꢁpF
6.3pF
6.4pF
6.5pF
6.6pF
CH
5.ꢁpF
5.3pF
Part number # indicates the package specification code.
33
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc CH
6.6pF
6.7pF
0.5pF GRM0332C1H6R6DA01#
0.05pF GRM0332C1H6R7WA01#
0.ꢀpF GRM0332C1H6R7BA01#
0.ꢁ5pF GRM0332C1H6R7CA01#
0.5pF GRM0332C1H6R7DA01#
0.05pF GRM0332C1H6R8WA01#
0.ꢀpF GRM0332C1H6R8BA01#
0.ꢁ5pF GRM0332C1H6R8CA01#
0.5pF GRM0332C1H6R8DA01#
0.05pF GRM0332C1H6R9WA01#
0.ꢀpF GRM0332C1H6R9BA01#
0.ꢁ5pF GRM0332C1H6R9CA01#
0.5pF GRM0332C1H6R9DA01#
0.05pF GRM0332C1H7R0WA01#
0.ꢀpF GRM0332C1H7R0BA01#
0.ꢁ5pF GRM0332C1H7R0CA01#
0.5pF GRM0332C1H7R0DA01#
0.05pF GRM0332C1H7R1WA01#
0.ꢀpF GRM0332C1H7R1BA01#
0.ꢁ5pF GRM0332C1H7R1CA01#
0.5pF GRM0332C1H7R1DA01#
0.05pF GRM0332C1H7R2WA01#
0.ꢀpF GRM0332C1H7R2BA01#
0.ꢁ5pF GRM0332C1H7R2CA01#
0.5pF GRM0332C1H7R2DA01#
0.05pF GRM0332C1H7R3WA01#
0.ꢀpF GRM0332C1H7R3BA01#
0.ꢁ5pF GRM0332C1H7R3CA01#
0.5pF GRM0332C1H7R3DA01#
0.05pF GRM0332C1H7R4WA01#
0.ꢀpF GRM0332C1H7R4BA01#
0.ꢁ5pF GRM0332C1H7R4CA01#
0.5pF GRM0332C1H7R4DA01#
0.05pF GRM0332C1H7R5WA01#
0.ꢀpF GRM0332C1H7R5BA01#
0.ꢁ5pF GRM0332C1H7R5CA01#
0.5pF GRM0332C1H7R5DA01#
0.05pF GRM0332C1H7R6WA01#
0.ꢀpF GRM0332C1H7R6BA01#
0.ꢁ5pF GRM0332C1H7R6CA01#
0.5pF GRM0332C1H7R6DA01#
0.05pF GRM0332C1H7R7WA01#
0.ꢀpF GRM0332C1H7R7BA01#
0.ꢁ5pF GRM0332C1H7R7CA01#
0.5pF GRM0332C1H7R7DA01#
0.05pF GRM0332C1H7R8WA01#
0.ꢀpF GRM0332C1H7R8BA01#
0.ꢁ5pF GRM0332C1H7R8CA01#
0.5pF GRM0332C1H7R8DA01#
0.05pF GRM0332C1H7R9WA01#
0.ꢀpF GRM0332C1H7R9BA01#
0.ꢁ5pF GRM0332C1H7R9CA01#
0.5pF GRM0332C1H7R9DA01#
0.05pF GRM0332C1H8R0WA01#
0.33mm 50Vdc CH
8.0pF
0.ꢀpF GRM0332C1H8R0BA01#
0.ꢁ5pF GRM0332C1H8R0CA01#
0.5pF GRM0332C1H8R0DA01#
0.05pF GRM0332C1H8R1WA01#
0.ꢀpF GRM0332C1H8R1BA01#
0.ꢁ5pF GRM0332C1H8R1CA01#
0.5pF GRM0332C1H8R1DA01#
0.05pF GRM0332C1H8R2WA01#
0.ꢀpF GRM0332C1H8R2BA01#
0.ꢁ5pF GRM0332C1H8R2CA01#
0.5pF GRM0332C1H8R2DA01#
0.05pF GRM0332C1H8R3WA01#
0.ꢀpF GRM0332C1H8R3BA01#
0.ꢁ5pF GRM0332C1H8R3CA01#
0.5pF GRM0332C1H8R3DA01#
0.05pF GRM0332C1H8R4WA01#
0.ꢀpF GRM0332C1H8R4BA01#
0.ꢁ5pF GRM0332C1H8R4CA01#
0.5pF GRM0332C1H8R4DA01#
0.05pF GRM0332C1H8R5WA01#
0.ꢀpF GRM0332C1H8R5BA01#
0.ꢁ5pF GRM0332C1H8R5CA01#
0.5pF GRM0332C1H8R5DA01#
0.05pF GRM0332C1H8R6WA01#
0.ꢀpF GRM0332C1H8R6BA01#
0.ꢁ5pF GRM0332C1H8R6CA01#
0.5pF GRM0332C1H8R6DA01#
0.05pF GRM0332C1H8R7WA01#
0.ꢀpF GRM0332C1H8R7BA01#
0.ꢁ5pF GRM0332C1H8R7CA01#
0.5pF GRM0332C1H8R7DA01#
0.05pF GRM0332C1H8R8WA01#
0.ꢀpF GRM0332C1H8R8BA01#
0.ꢁ5pF GRM0332C1H8R8CA01#
0.5pF GRM0332C1H8R8DA01#
0.05pF GRM0332C1H8R9WA01#
0.ꢀpF GRM0332C1H8R9BA01#
0.ꢁ5pF GRM0332C1H8R9CA01#
0.5pF GRM0332C1H8R9DA01#
0.05pF GRM0332C1H9R0WA01#
0.ꢀpF GRM0332C1H9R0BA01#
0.ꢁ5pF GRM0332C1H9R0CA01#
0.5pF GRM0332C1H9R0DA01#
0.05pF GRM0332C1H9R1WA01#
0.ꢀpF GRM0332C1H9R1BA01#
0.ꢁ5pF GRM0332C1H9R1CA01#
0.5pF GRM0332C1H9R1DA01#
0.05pF GRM0332C1H9R2WA01#
0.ꢀpF GRM0332C1H9R2BA01#
0.ꢁ5pF GRM0332C1H9R2CA01#
0.5pF GRM0332C1H9R2DA01#
0.05pF GRM0332C1H9R3WA01#
0.ꢀpF GRM0332C1H9R3BA01#
0.ꢁ5pF GRM0332C1H9R3CA01#
8.ꢀpF
8.ꢁpF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.ꢀpF
9.ꢁpF
9.3pF
6.8pF
6.9pF
7.0pF
7.ꢀpF
7.ꢁpF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
Part number # indicates the package specification code.
34
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc CH
9.3pF
9.4pF
0.5pF GRM0332C1H9R3DA01#
0.05pF GRM0332C1H9R4WA01#
0.ꢀpF GRM0332C1H9R4BA01#
0.ꢁ5pF GRM0332C1H9R4CA01#
0.5pF GRM0332C1H9R4DA01#
0.05pF GRM0332C1H9R5WA01#
0.ꢀpF GRM0332C1H9R5BA01#
0.ꢁ5pF GRM0332C1H9R5CA01#
0.5pF GRM0332C1H9R5DA01#
0.05pF GRM0332C1H9R6WA01#
0.ꢀpF GRM0332C1H9R6BA01#
0.ꢁ5pF GRM0332C1H9R6CA01#
0.5pF GRM0332C1H9R6DA01#
0.05pF GRM0332C1H9R7WA01#
0.ꢀpF GRM0332C1H9R7BA01#
0.ꢁ5pF GRM0332C1H9R7CA01#
0.5pF GRM0332C1H9R7DA01#
0.05pF GRM0332C1H9R8WA01#
0.ꢀpF GRM0332C1H9R8BA01#
0.ꢁ5pF GRM0332C1H9R8CA01#
0.5pF GRM0332C1H9R8DA01#
0.05pF GRM0332C1H9R9WA01#
0.ꢀpF GRM0332C1H9R9BA01#
0.ꢁ5pF GRM0332C1H9R9CA01#
0.5pF GRM0332C1H9R9DA01#
0.33mm 50Vdc UJ
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
ꢀ0pF
ꢀꢁpF
ꢀ5pF
0.ꢁ5pF GRM0333U1H4R0CD01#
0.ꢁ5pF GRM0333U1H5R0CD01#
0.5pF GRM0333U1H6R0DD01#
0.5pF GRM0333U1H7R0DD01#
0.5pF GRM0333U1H8R0DD01#
0.5pF GRM0333U1H9R0DD01#
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
52
52
52
GRM0333U1H100JD01#
GRM0333U1H120JD01#
GRM0333U1H150JD01#
ꢁ5Vdc RꢁH ꢀ.0pF
ꢁ.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
ꢀ0pF
0.ꢁ5pF GRM0336R1E1R0CD01#
0.ꢁ5pF GRM0336R1E2R0CD01#
0.ꢁ5pF GRM0336R1E3R0CD01#
0.ꢁ5pF GRM0336R1E4R0CD01#
0.ꢁ5pF GRM0336R1E5R0CD01#
0.5pF GRM0336R1E6R0DD01#
0.5pF GRM0336R1E7R0DD01#
0.5pF GRM0336R1E8R0DD01#
0.5pF GRM0336R1E9R0DD01#
52
52
52
52
52
52
52
52
52
52
52
52
52
GRM0336R1E100JD01#
GRM0336R1E120JD01#
GRM0336R1E150JD01#
GRM0336R1E180JD01#
GRM0336R1E220JD01#
GRM0336R1E270JD01#
GRM0336R1E330JD01#
GRM0336R1E390JD01#
GRM0336R1E470JD01#
GRM0336R1E560JD01#
GRM0336R1E680JD01#
GRM0336R1E820JD01#
GRM0336R1E101JD01#
ꢀꢁpF
ꢀ5pF
ꢀ8pF
ꢁꢁpF
ꢁ7pF
33pF
ꢀ0pF
ꢀꢁpF
ꢀ5pF
ꢀ8pF
ꢁꢁpF
ꢁ7pF
33pF
39pF
47pF
56pF
68pF
8ꢁpF
ꢀ00pF
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
GRM0332C1H100GA01#
GRM0332C1H100JA01#
GRM0332C1H120GA01#
GRM0332C1H120JA01#
GRM0332C1H150GA01#
GRM0332C1H150JA01#
GRM0332C1H180GA01#
GRM0332C1H180JA01#
GRM0332C1H220GA01#
GRM0332C1H220JA01#
GRM0332C1H270GA01#
GRM0332C1H270JA01#
GRM0332C1H330GA01#
GRM0332C1H330JA01#
GRM0332C1H390GA01#
GRM0332C1H390JA01#
GRM0332C1H470GA01#
GRM0332C1H470JA01#
GRM0332C1H560GA01#
GRM0332C1H560JA01#
GRM0332C1H680GA01#
GRM0332C1H680JA01#
GRM0332C1H820GA01#
GRM0332C1H820JA01#
GRM0332C1H101GA01#
GRM0332C1H101JA01#
39pF
47pF
56pF
68pF
8ꢁpF
ꢀ00pF
RK
ꢀ.0pF
ꢁ.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
ꢀ0pF
ꢀꢁpF
ꢀ5pF
ꢀ8pF
ꢁꢁpF
ꢁ7pF
33pF
39pF
47pF
56pF
68pF
8ꢁpF
ꢀ00pF
0.ꢁ5pF GRM0334R1E1R0CD01#
0.ꢁ5pF GRM0334R1E2R0CD01#
0.ꢁ5pF GRM0333R1E3R0CD01#
0.ꢁ5pF GRM0332R1E4R0CD01#
0.ꢁ5pF GRM0332R1E5R0CD01#
0.5pF GRM0332R1E6R0DD01#
0.5pF GRM0332R1E7R0DD01#
0.5pF GRM0332R1E8R0DD01#
0.5pF GRM0332R1E9R0DD01#
RJ
RH
52
52
52
52
52
52
52
52
52
52
52
52
52
GRM0332R1E100JD01#
GRM0332R1E120JD01#
GRM0332R1E150JD01#
GRM0332R1E180JD01#
GRM0332R1E220JD01#
GRM0332R1E270JD01#
GRM0332R1E330JD01#
GRM0332R1E390JD01#
GRM0332R1E470JD01#
GRM0332R1E560JD01#
GRM0332R1E680JD01#
GRM0332R1E820JD01#
GRM0332R1E101JD01#
UK
UJ
ꢀ.0pF
ꢁ.0pF
3.0pF
0.ꢁ5pF GRM0334U1H1R0CD01#
0.ꢁ5pF GRM0334U1H2R0CD01#
0.ꢁ5pF GRM0333U1H3R0CD01#
SꢁH ꢀ.0pF
0.ꢁ5pF GRM0336S1E1R0CD01#
Part number # indicates the package specification code.
35
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 25Vdc S2H 2.0pF
0.25pF GRM0336S1E2R0CD01#
0.25pF GRM0336S1E3R0CD01#
0.25pF GRM0336S1E4R0CD01#
0.25pF GRM0336S1E5R0CD01#
0.5pF GRM0336S1E6R0DD01#
0.5pF GRM0336S1E7R0DD01#
0.5pF GRM0336S1E8R0DD01#
0.5pF GRM0336S1E9R0DD01#
0.33mm 25Vdc T2H
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM0336T1E150JD01#
GRM0336T1E180JD01#
GRM0336T1E220JD01#
GRM0336T1E270JD01#
GRM0336T1E330JD01#
GRM0336T1E390JD01#
GRM0336T1E470JD01#
GRM0336T1E560JD01#
GRM0336T1E680JD01#
GRM0336T1E820JD01#
GRM0336T1E101JD01#
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM0336S1E100JD01#
GRM0336S1E120JD01#
GRM0336S1E150JD01#
GRM0336S1E180JD01#
GRM0336S1E220JD01#
GRM0336S1E270JD01#
GRM0336S1E330JD01#
GRM0336S1E390JD01#
GRM0336S1E470JD01#
GRM0336S1E560JD01#
GRM0336S1E680JD01#
GRM0336S1E820JD01#
GRM0336S1E101JD01#
TK
0.25pF GRM0334T1E1R0CD01#
0.25pF GRM0334T1E2R0CD01#
0.25pF GRM0333T1E3R0CD01#
0.25pF GRM0332T1E4R0CD01#
0.25pF GRM0332T1E5R0CD01#
0.5pF GRM0332T1E6R0DD01#
0.5pF GRM0332T1E7R0DD01#
0.5pF GRM0332T1E8R0DD01#
0.5pF GRM0332T1E9R0DD01#
TJ
TH
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM0332T1E100JD01#
GRM0332T1E120JD01#
GRM0332T1E150JD01#
GRM0332T1E180JD01#
GRM0332T1E220JD01#
GRM0332T1E270JD01#
GRM0332T1E330JD01#
GRM0332T1E390JD01#
GRM0332T1E470JD01#
GRM0332T1E560JD01#
GRM0332T1E680JD01#
GRM0332T1E820JD01#
GRM0332T1E101JD01#
GRM0333U1E180JD01#
GRM0333U1E220JD01#
GRM0333U1E270JD01#
GRM0333U1E330JD01#
GRM0333U1E390JD01#
GRM0333U1E470JD01#
GRM0333U1E560JD01#
GRM0333U1E680JD01#
GRM0333U1E820JD01#
GRM0333U1E101JD01#
SK
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
0.25pF GRM0334S1E1R0CD01#
0.25pF GRM0334S1E2R0CD01#
0.25pF GRM0333S1E3R0CD01#
0.25pF GRM0332S1E4R0CD01#
0.25pF GRM0332S1E5R0CD01#
0.5pF GRM0332S1E6R0DD01#
0.5pF GRM0332S1E7R0DD01#
0.5pF GRM0332S1E8R0DD01#
0.5pF GRM0332S1E9R0DD01#
SJ
SH
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM0332S1E100JD01#
GRM0332S1E120JD01#
GRM0332S1E150JD01#
GRM0332S1E180JD01#
GRM0332S1E220JD01#
GRM0332S1E270JD01#
GRM0332S1E330JD01#
GRM0332S1E390JD01#
GRM0332S1E470JD01#
GRM0332S1E560JD01#
GRM0332S1E680JD01#
GRM0332S1E820JD01#
GRM0332S1E101JD01#
UJ
T2H
0.25pF GRM0336T1E1R0CD01#
0.25pF GRM0336T1E2R0CD01#
0.25pF GRM0336T1E3R0CD01#
0.25pF GRM0336T1E4R0CD01#
0.25pF GRM0336T1E5R0CD01#
0.5pF GRM0336T1E6R0DD01#
0.5pF GRM0336T1E7R0DD01#
0.5pF GRM0336T1E8R0DD01#
0.5pF GRM0336T1E9R0DD01#
1.0×0.5mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.33mm 50Vdc C0G 0.1pF
0.1pF GRM1535C1HR10BDD5#
0.1pF GRM1535C1HR20BDD5#
0.1pF GRM1535C1HR30BDD5#
0.1pF GRM1535C1HR40BDD5#
0.1pF GRM1535C1HR50BDD5#
0.1pF GRM1535C1HR60BDD5#
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
5ꢀ
5ꢀ
GRM0336T1E100JD01#
GRM0336T1E120JD01#
Part number # indicates the package specification code.
36
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc C0G 0.7pF
0.8pF
0.9pF
ꢀ.0pF
ꢀ.ꢀpF
ꢀ.ꢁpF
ꢀ.3pF
ꢀ.4pF
ꢀ.5pF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
ꢁ.0pF
ꢁ.ꢀpF
ꢁ.ꢁpF
ꢁ.3pF
ꢁ.4pF
ꢁ.5pF
ꢁ.6pF
ꢁ.7pF
ꢁ.8pF
ꢁ.9pF
3.0pF
3.ꢀpF
3.ꢁpF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.ꢀpF
4.ꢁpF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
5.ꢀpF
5.ꢁpF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
0.ꢀpF GRM1535C1HR70BDD5#
0.ꢀpF GRM1535C1HR80BDD5#
0.ꢀpF GRM1535C1HR90BDD5#
0.ꢁ5pF GRM1535C1H1R0CDD5#
0.ꢁ5pF GRM1535C1H1R1CDD5#
0.ꢁ5pF GRM1535C1H1R2CDD5#
0.ꢁ5pF GRM1535C1H1R3CDD5#
0.ꢁ5pF GRM1535C1H1R4CDD5#
0.ꢁ5pF GRM1535C1H1R5CDD5#
0.ꢁ5pF GRM1535C1H1R6CDD5#
0.ꢁ5pF GRM1535C1H1R7CDD5#
0.ꢁ5pF GRM1535C1H1R8CDD5#
0.ꢁ5pF GRM1535C1H1R9CDD5#
0.ꢁ5pF GRM1535C1H2R0CDD5#
0.ꢁ5pF GRM1535C1H2R1CDD5#
0.ꢁ5pF GRM1535C1H2R2CDD5#
0.ꢁ5pF GRM1535C1H2R3CDD5#
0.ꢁ5pF GRM1535C1H2R4CDD5#
0.ꢁ5pF GRM1535C1H2R5CDD5#
0.ꢁ5pF GRM1535C1H2R6CDD5#
0.ꢁ5pF GRM1535C1H2R7CDD5#
0.ꢁ5pF GRM1535C1H2R8CDD5#
0.ꢁ5pF GRM1535C1H2R9CDD5#
0.ꢁ5pF GRM1535C1H3R0CDD5#
0.ꢁ5pF GRM1535C1H3R1CDD5#
0.ꢁ5pF GRM1535C1H3R2CDD5#
0.ꢁ5pF GRM1535C1H3R3CDD5#
0.ꢁ5pF GRM1535C1H3R4CDD5#
0.ꢁ5pF GRM1535C1H3R5CDD5#
0.ꢁ5pF GRM1535C1H3R6CDD5#
0.ꢁ5pF GRM1535C1H3R7CDD5#
0.ꢁ5pF GRM1535C1H3R8CDD5#
0.ꢁ5pF GRM1535C1H3R9CDD5#
0.ꢁ5pF GRM1535C1H4R0CDD5#
0.ꢁ5pF GRM1535C1H4R1CDD5#
0.ꢁ5pF GRM1535C1H4R2CDD5#
0.ꢁ5pF GRM1535C1H4R3CDD5#
0.ꢁ5pF GRM1535C1H4R4CDD5#
0.ꢁ5pF GRM1535C1H4R5CDD5#
0.ꢁ5pF GRM1535C1H4R6CDD5#
0.ꢁ5pF GRM1535C1H4R7CDD5#
0.ꢁ5pF GRM1535C1H4R8CDD5#
0.ꢁ5pF GRM1535C1H4R9CDD5#
0.ꢁ5pF GRM1535C1H5R0CDD5#
0.5pF GRM1535C1H5R1DDD5#
0.5pF GRM1535C1H5R2DDD5#
0.5pF GRM1535C1H5R3DDD5#
0.5pF GRM1535C1H5R4DDD5#
0.5pF GRM1535C1H5R5DDD5#
0.5pF GRM1535C1H5R6DDD5#
0.5pF GRM1535C1H5R7DDD5#
0.5pF GRM1535C1H5R8DDD5#
0.5pF GRM1535C1H5R9DDD5#
0.5pF GRM1535C1H6R0DDD5#
0.33mm 50Vdc C0G 6.ꢀpF
6.ꢁpF
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.ꢀpF
7.ꢁpF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.ꢀpF
8.ꢁpF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.ꢀpF
9.ꢁpF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
ꢀ0pF
0.5pF GRM1535C1H6R1DDD5#
0.5pF GRM1535C1H6R2DDD5#
0.5pF GRM1535C1H6R3DDD5#
0.5pF GRM1535C1H6R4DDD5#
0.5pF GRM1535C1H6R5DDD5#
0.5pF GRM1535C1H6R6DDD5#
0.5pF GRM1535C1H6R7DDD5#
0.5pF GRM1535C1H6R8DDD5#
0.5pF GRM1535C1H6R9DDD5#
0.5pF GRM1535C1H7R0DDD5#
0.5pF GRM1535C1H7R1DDD5#
0.5pF GRM1535C1H7R2DDD5#
0.5pF GRM1535C1H7R3DDD5#
0.5pF GRM1535C1H7R4DDD5#
0.5pF GRM1535C1H7R5DDD5#
0.5pF GRM1535C1H7R6DDD5#
0.5pF GRM1535C1H7R7DDD5#
0.5pF GRM1535C1H7R8DDD5#
0.5pF GRM1535C1H7R9DDD5#
0.5pF GRM1535C1H8R0DDD5#
0.5pF GRM1535C1H8R1DDD5#
0.5pF GRM1535C1H8R2DDD5#
0.5pF GRM1535C1H8R3DDD5#
0.5pF GRM1535C1H8R4DDD5#
0.5pF GRM1535C1H8R5DDD5#
0.5pF GRM1535C1H8R6DDD5#
0.5pF GRM1535C1H8R7DDD5#
0.5pF GRM1535C1H8R8DDD5#
0.5pF GRM1535C1H8R9DDD5#
0.5pF GRM1535C1H9R0DDD5#
0.5pF GRM1535C1H9R1DDD5#
0.5pF GRM1535C1H9R2DDD5#
0.5pF GRM1535C1H9R3DDD5#
0.5pF GRM1535C1H9R4DDD5#
0.5pF GRM1535C1H9R5DDD5#
0.5pF GRM1535C1H9R6DDD5#
0.5pF GRM1535C1H9R7DDD5#
0.5pF GRM1535C1H9R8DDD5#
0.5pF GRM1535C1H9R9DDD5#
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
GRM1535C1H100JDD5#
GRM1535C1H120JDD5#
GRM1535C1H150JDD5#
GRM1535C1H180JDD5#
GRM1535C1H220JDD5#
GRM1535C1H270JDD5#
GRM1535C1H330JDD5#
GRM1535C1H390JDD5#
GRM1535C1H470JDD5#
GRM1535C1H560JDD5#
GRM1535C1H680JDD5#
GRM1535C1H820JDD5#
GRM1535C1H101JDD5#
GRM1535C1H121JDD5#
GRM1535C1H151JDD5#
ꢀꢁpF
ꢀ5pF
ꢀ8pF
ꢁꢁpF
ꢁ7pF
33pF
39pF
47pF
56pF
68pF
8ꢁpF
ꢀ00pF
ꢀꢁ0pF
ꢀ50pF
Part number # indicates the package specification code.
37
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc C0G 180pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1535C1H181JDD5#
GRM1535C1H221JDD5#
GRM1535C1H271JDD5#
GRM1535C1H331JDD5#
GRM1535C1H391JDD5#
GRM1535C1H471JDD5#
GRM1535C1H561JDD5#
GRM1535C1H681JDD5#
0.33mm 50Vdc CH
4.7pF
4.8pF
4.9pF
5.0pF
5.1pF
5.2pF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.1pF
6.2pF
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.1pF
7.2pF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.1pF
8.2pF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.1pF
9.2pF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
10pF
0.25pF GRM1532C1H4R7CDD5#
0.25pF GRM1532C1H4R8CDD5#
0.25pF GRM1532C1H4R9CDD5#
0.25pF GRM1532C1H5R0CDD5#
0.5pF GRM1532C1H5R1DDD5#
0.5pF GRM1532C1H5R2DDD5#
0.5pF GRM1532C1H5R3DDD5#
0.5pF GRM1532C1H5R4DDD5#
0.5pF GRM1532C1H5R5DDD5#
0.5pF GRM1532C1H5R6DDD5#
0.5pF GRM1532C1H5R7DDD5#
0.5pF GRM1532C1H5R8DDD5#
0.5pF GRM1532C1H5R9DDD5#
0.5pF GRM1532C1H6R0DDD5#
0.5pF GRM1532C1H6R1DDD5#
0.5pF GRM1532C1H6R2DDD5#
0.5pF GRM1532C1H6R3DDD5#
0.5pF GRM1532C1H6R4DDD5#
0.5pF GRM1532C1H6R5DDD5#
0.5pF GRM1532C1H6R6DDD5#
0.5pF GRM1532C1H6R7DDD5#
0.5pF GRM1532C1H6R8DDD5#
0.5pF GRM1532C1H6R9DDD5#
0.5pF GRM1532C1H7R0DDD5#
0.5pF GRM1532C1H7R1DDD5#
0.5pF GRM1532C1H7R2DDD5#
0.5pF GRM1532C1H7R3DDD5#
0.5pF GRM1532C1H7R4DDD5#
0.5pF GRM1532C1H7R5DDD5#
0.5pF GRM1532C1H7R6DDD5#
0.5pF GRM1532C1H7R7DDD5#
0.5pF GRM1532C1H7R8DDD5#
0.5pF GRM1532C1H7R9DDD5#
0.5pF GRM1532C1H8R0DDD5#
0.5pF GRM1532C1H8R1DDD5#
0.5pF GRM1532C1H8R2DDD5#
0.5pF GRM1532C1H8R3DDD5#
0.5pF GRM1532C1H8R4DDD5#
0.5pF GRM1532C1H8R5DDD5#
0.5pF GRM1532C1H8R6DDD5#
0.5pF GRM1532C1H8R7DDD5#
0.5pF GRM1532C1H8R8DDD5#
0.5pF GRM1532C1H8R9DDD5#
0.5pF GRM1532C1H9R0DDD5#
0.5pF GRM1532C1H9R1DDD5#
0.5pF GRM1532C1H9R2DDD5#
0.5pF GRM1532C1H9R3DDD5#
0.5pF GRM1532C1H9R4DDD5#
0.5pF GRM1532C1H9R5DDD5#
0.5pF GRM1532C1H9R6DDD5#
0.5pF GRM1532C1H9R7DDD5#
0.5pF GRM1532C1H9R8DDD5#
0.5pF GRM1532C1H9R9DDD5#
220pF
270pF
330pF
390pF
470pF
560pF
680pF
CK
0.1pF
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
2.2pF
2.3pF
2.4pF
2.5pF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.2pF
4.3pF
4.4pF
4.5pF
4.6pF
0.1pF GRM1534C1HR10BDD5#
0.1pF GRM1534C1HR20BDD5#
0.1pF GRM1534C1HR30BDD5#
0.1pF GRM1534C1HR40BDD5#
0.1pF GRM1534C1HR50BDD5#
0.1pF GRM1534C1HR60BDD5#
0.1pF GRM1534C1HR70BDD5#
0.1pF GRM1534C1HR80BDD5#
0.1pF GRM1534C1HR90BDD5#
0.25pF GRM1534C1H1R0CDD5#
0.25pF GRM1534C1H1R1CDD5#
0.25pF GRM1534C1H1R2CDD5#
0.25pF GRM1534C1H1R3CDD5#
0.25pF GRM1534C1H1R4CDD5#
0.25pF GRM1534C1H1R5CDD5#
0.25pF GRM1534C1H1R6CDD5#
0.25pF GRM1534C1H1R7CDD5#
0.25pF GRM1534C1H1R8CDD5#
0.25pF GRM1534C1H1R9CDD5#
0.25pF GRM1534C1H2R0CDD5#
0.25pF GRM1533C1H2R1CDD5#
0.25pF GRM1533C1H2R2CDD5#
0.25pF GRM1533C1H2R3CDD5#
0.25pF GRM1533C1H2R4CDD5#
0.25pF GRM1533C1H2R5CDD5#
0.25pF GRM1533C1H2R6CDD5#
0.25pF GRM1533C1H2R7CDD5#
0.25pF GRM1533C1H2R8CDD5#
0.25pF GRM1533C1H2R9CDD5#
0.25pF GRM1533C1H3R0CDD5#
0.25pF GRM1533C1H3R1CDD5#
0.25pF GRM1533C1H3R2CDD5#
0.25pF GRM1533C1H3R3CDD5#
0.25pF GRM1533C1H3R4CDD5#
0.25pF GRM1533C1H3R5CDD5#
0.25pF GRM1533C1H3R6CDD5#
0.25pF GRM1533C1H3R7CDD5#
0.25pF GRM1533C1H3R8CDD5#
0.25pF GRM1533C1H3R9CDD5#
0.25pF GRM1532C1H4R0CDD5#
0.25pF GRM1532C1H4R1CDD5#
0.25pF GRM1532C1H4R2CDD5#
0.25pF GRM1532C1H4R3CDD5#
0.25pF GRM1532C1H4R4CDD5#
0.25pF GRM1532C1H4R5CDD5#
0.25pF GRM1532C1H4R6CDD5#
CJ
CH
5ꢀ
GRM1532C1H100JDD5#
Part number # indicates the package specification code.
38
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 50Vdc CH
12pF
15pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1532C1H120JDD5#
GRM1532C1H150JDD5#
GRM1532C1H180JDD5#
GRM1532C1H220JDD5#
GRM1532C1H270JDD5#
GRM1532C1H330JDD5#
GRM1532C1H390JDD5#
GRM1532C1H470JDD5#
GRM1532C1H560JDD5#
GRM1532C1H680JDD5#
GRM1532C1H820JDD5#
GRM1532C1H101JDD5#
GRM1532C1H121JDD5#
GRM1532C1H151JDD5#
GRM1532C1H181JDD5#
GRM1532C1H221JDD5#
GRM1532C1H271JDD5#
GRM1532C1H331JDD5#
GRM1532C1H391JDD5#
GRM1532C1H471JDD5#
GRM1532C1H561JDD5#
GRM1532C1H681JDD5#
0.55mm 50Vdc C0G 1.4pF
1.5pF
0.25pF GRM1555C1H1R4CA01#
0.05pF GRM1555C1H1R5WA01#
0.1pF GRM1555C1H1R5BA01#
0.25pF GRM1555C1H1R5CA01#
0.05pF GRM1555C1H1R6WA01#
0.1pF GRM1555C1H1R6BA01#
0.25pF GRM1555C1H1R6CA01#
0.05pF GRM1555C1H1R7WA01#
0.1pF GRM1555C1H1R7BA01#
0.25pF GRM1555C1H1R7CA01#
0.05pF GRM1555C1H1R8WA01#
0.1pF GRM1555C1H1R8BA01#
0.25pF GRM1555C1H1R8CA01#
0.05pF GRM1555C1H1R9WA01#
0.1pF GRM1555C1H1R9BA01#
0.25pF GRM1555C1H1R9CA01#
0.05pF GRM1555C1H2R0WA01#
0.1pF GRM1555C1H2R0BA01#
0.25pF GRM1555C1H2R0CA01#
0.05pF GRM1555C1H2R1WA01#
0.1pF GRM1555C1H2R1BA01#
0.25pF GRM1555C1H2R1CA01#
0.05pF GRM1555C1H2R2WA01#
0.1pF GRM1555C1H2R2BA01#
0.25pF GRM1555C1H2R2CA01#
0.05pF GRM1555C1H2R3WA01#
0.1pF GRM1555C1H2R3BA01#
0.25pF GRM1555C1H2R3CA01#
0.05pF GRM1555C1H2R4WA01#
0.1pF GRM1555C1H2R4BA01#
0.25pF GRM1555C1H2R4CA01#
0.05pF GRM1555C1H2R5WA01#
0.1pF GRM1555C1H2R5BA01#
0.25pF GRM1555C1H2R5CA01#
0.05pF GRM1555C1H2R6WA01#
0.1pF GRM1555C1H2R6BA01#
0.25pF GRM1555C1H2R6CA01#
0.05pF GRM1555C1H2R7WA01#
0.1pF GRM1555C1H2R7BA01#
0.25pF GRM1555C1H2R7CA01#
0.05pF GRM1555C1H2R8WA01#
0.1pF GRM1555C1H2R8BA01#
0.25pF GRM1555C1H2R8CA01#
0.05pF GRM1555C1H2R9WA01#
0.1pF GRM1555C1H2R9BA01#
0.25pF GRM1555C1H2R9CA01#
0.05pF GRM1555C1H3R0WA01#
0.1pF GRM1555C1H3R0BA01#
0.25pF GRM1555C1H3R0CA01#
0.05pF GRM1555C1H3R1WA01#
0.1pF GRM1555C1H3R1BA01#
0.25pF GRM1555C1H3R1CA01#
0.05pF GRM1555C1H3R2WA01#
0.1pF GRM1555C1H3R2BA01#
18pF
22pF
27pF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
2.2pF
2.3pF
2.4pF
2.5pF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
0.55mm 50Vdc C0G 0.1pF
0.05pF GRM1555C1HR10WA01#
0.1pF GRM1555C1HR10BA01#
0.05pF GRM1555C1HR20WA01#
0.1pF GRM1555C1HR20BA01#
0.05pF GRM1555C1HR30WA01#
0.1pF GRM1555C1HR30BA01#
0.05pF GRM1555C1HR40WA01#
0.1pF GRM1555C1HR40BA01#
0.05pF GRM1555C1HR50WA01#
0.1pF GRM1555C1HR50BA01#
0.05pF GRM1555C1HR60WA01#
0.1pF GRM1555C1HR60BA01#
0.05pF GRM1555C1HR70WA01#
0.1pF GRM1555C1HR70BA01#
0.05pF GRM1555C1HR80WA01#
0.1pF GRM1555C1HR80BA01#
0.05pF GRM1555C1HR90WA01#
0.1pF GRM1555C1HR90BA01#
0.05pF GRM1555C1H1R0WA01#
0.1pF GRM1555C1H1R0BA01#
0.25pF GRM1555C1H1R0CA01#
0.05pF GRM1555C1H1R1WA01#
0.1pF GRM1555C1H1R1BA01#
0.25pF GRM1555C1H1R1CA01#
0.05pF GRM1555C1H1R2WA01#
0.1pF GRM1555C1H1R2BA01#
0.25pF GRM1555C1H1R2CA01#
0.05pF GRM1555C1H1R3WA01#
0.1pF GRM1555C1H1R3BA01#
0.25pF GRM1555C1H1R3CA01#
0.05pF GRM1555C1H1R4WA01#
0.1pF GRM1555C1H1R4BA01#
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.4pF
Part number # indicates the package specification code.
39
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc C0G 3.2pF
3.3pF
0.25pF GRM1555C1H3R2CA01#
0.05pF GRM1555C1H3R3WA01#
0.ꢀpF GRM1555C1H3R3BA01#
0.25pF GRM1555C1H3R3CA01#
0.05pF GRM1555C1H3R4WA01#
0.ꢀpF GRM1555C1H3R4BA01#
0.25pF GRM1555C1H3R4CA01#
0.05pF GRM1555C1H3R5WA01#
0.ꢀpF GRM1555C1H3R5BA01#
0.25pF GRM1555C1H3R5CA01#
0.05pF GRM1555C1H3R6WA01#
0.ꢀpF GRM1555C1H3R6BA01#
0.25pF GRM1555C1H3R6CA01#
0.05pF GRM1555C1H3R7WA01#
0.ꢀpF GRM1555C1H3R7BA01#
0.25pF GRM1555C1H3R7CA01#
0.05pF GRM1555C1H3R8WA01#
0.ꢀpF GRM1555C1H3R8BA01#
0.25pF GRM1555C1H3R8CA01#
0.05pF GRM1555C1H3R9WA01#
0.ꢀpF GRM1555C1H3R9BA01#
0.25pF GRM1555C1H3R9CA01#
0.05pF GRM1555C1H4R0WA01#
0.ꢀpF GRM1555C1H4R0BA01#
0.25pF GRM1555C1H4R0CA01#
0.05pF GRM1555C1H4R1WA01#
0.ꢀpF GRM1555C1H4R1BA01#
0.25pF GRM1555C1H4R1CA01#
0.05pF GRM1555C1H4R2WA01#
0.ꢀpF GRM1555C1H4R2BA01#
0.25pF GRM1555C1H4R2CA01#
0.05pF GRM1555C1H4R3WA01#
0.ꢀpF GRM1555C1H4R3BA01#
0.25pF GRM1555C1H4R3CA01#
0.05pF GRM1555C1H4R4WA01#
0.ꢀpF GRM1555C1H4R4BA01#
0.25pF GRM1555C1H4R4CA01#
0.05pF GRM1555C1H4R5WA01#
0.ꢀpF GRM1555C1H4R5BA01#
0.25pF GRM1555C1H4R5CA01#
0.05pF GRM1555C1H4R6WA01#
0.ꢀpF GRM1555C1H4R6BA01#
0.25pF GRM1555C1H4R6CA01#
0.05pF GRM1555C1H4R7WA01#
0.ꢀpF GRM1555C1H4R7BA01#
0.25pF GRM1555C1H4R7CA01#
0.05pF GRM1555C1H4R8WA01#
0.ꢀpF GRM1555C1H4R8BA01#
0.25pF GRM1555C1H4R8CA01#
0.05pF GRM1555C1H4R9WA01#
0.ꢀpF GRM1555C1H4R9BA01#
0.25pF GRM1555C1H4R9CA01#
0.05pF GRM1555C1H5R0WA01#
0.ꢀpF GRM1555C1H5R0BA01#
0.55mm 50Vdc C0G 5.0pF
5.ꢀpF
0.25pF GRM1555C1H5R0CA01#
0.05pF GRM1555C1H5R1WA01#
0.ꢀpF GRM1555C1H5R1BA01#
0.25pF GRM1555C1H5R1CA01#
0.5pF GRM1555C1H5R1DA01#
0.05pF GRM1555C1H5R2WA01#
0.ꢀpF GRM1555C1H5R2BA01#
0.25pF GRM1555C1H5R2CA01#
0.5pF GRM1555C1H5R2DA01#
0.05pF GRM1555C1H5R3WA01#
0.ꢀpF GRM1555C1H5R3BA01#
0.25pF GRM1555C1H5R3CA01#
0.5pF GRM1555C1H5R3DA01#
0.05pF GRM1555C1H5R4WA01#
0.ꢀpF GRM1555C1H5R4BA01#
0.25pF GRM1555C1H5R4CA01#
0.5pF GRM1555C1H5R4DA01#
0.05pF GRM1555C1H5R5WA01#
0.ꢀpF GRM1555C1H5R5BA01#
0.25pF GRM1555C1H5R5CA01#
0.5pF GRM1555C1H5R5DA01#
0.05pF GRM1555C1H5R6WA01#
0.ꢀpF GRM1555C1H5R6BA01#
0.25pF GRM1555C1H5R6CA01#
0.5pF GRM1555C1H5R6DA01#
0.05pF GRM1555C1H5R7WA01#
0.ꢀpF GRM1555C1H5R7BA01#
0.25pF GRM1555C1H5R7CA01#
0.5pF GRM1555C1H5R7DA01#
0.05pF GRM1555C1H5R8WA01#
0.ꢀpF GRM1555C1H5R8BA01#
0.25pF GRM1555C1H5R8CA01#
0.5pF GRM1555C1H5R8DA01#
0.05pF GRM1555C1H5R9WA01#
0.ꢀpF GRM1555C1H5R9BA01#
0.25pF GRM1555C1H5R9CA01#
0.5pF GRM1555C1H5R9DA01#
0.05pF GRM1555C1H6R0WA01#
0.ꢀpF GRM1555C1H6R0BA01#
0.25pF GRM1555C1H6R0CA01#
0.5pF GRM1555C1H6R0DA01#
0.05pF GRM1555C1H6R1WA01#
0.ꢀpF GRM1555C1H6R1BA01#
0.25pF GRM1555C1H6R1CA01#
0.5pF GRM1555C1H6R1DA01#
0.05pF GRM1555C1H6R2WA01#
0.ꢀpF GRM1555C1H6R2BA01#
0.25pF GRM1555C1H6R2CA01#
0.5pF GRM1555C1H6R2DA01#
0.05pF GRM1555C1H6R3WA01#
0.ꢀpF GRM1555C1H6R3BA01#
0.25pF GRM1555C1H6R3CA01#
0.5pF GRM1555C1H6R3DA01#
0.05pF GRM1555C1H6R4WA01#
3.4pF
5.2pF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
6.2pF
6.3pF
6.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.ꢀpF
4.2pF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
Part number # indicates the package specification code.
40
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc C0G 6.4pF
0.ꢀpF GRM1555C1H6R4BA01#
0.ꢁ5pF GRM1555C1H6R4CA01#
0.5pF GRM1555C1H6R4DA01#
0.05pF GRM1555C1H6R5WA01#
0.ꢀpF GRM1555C1H6R5BA01#
0.ꢁ5pF GRM1555C1H6R5CA01#
0.5pF GRM1555C1H6R5DA01#
0.05pF GRM1555C1H6R6WA01#
0.ꢀpF GRM1555C1H6R6BA01#
0.ꢁ5pF GRM1555C1H6R6CA01#
0.5pF GRM1555C1H6R6DA01#
0.05pF GRM1555C1H6R7WA01#
0.ꢀpF GRM1555C1H6R7BA01#
0.ꢁ5pF GRM1555C1H6R7CA01#
0.5pF GRM1555C1H6R7DA01#
0.05pF GRM1555C1H6R8WA01#
0.ꢀpF GRM1555C1H6R8BA01#
0.ꢁ5pF GRM1555C1H6R8CA01#
0.5pF GRM1555C1H6R8DA01#
0.05pF GRM1555C1H6R9WA01#
0.ꢀpF GRM1555C1H6R9BA01#
0.ꢁ5pF GRM1555C1H6R9CA01#
0.5pF GRM1555C1H6R9DA01#
0.05pF GRM1555C1H7R0WA01#
0.ꢀpF GRM1555C1H7R0BA01#
0.ꢁ5pF GRM1555C1H7R0CA01#
0.5pF GRM1555C1H7R0DA01#
0.05pF GRM1555C1H7R1WA01#
0.ꢀpF GRM1555C1H7R1BA01#
0.ꢁ5pF GRM1555C1H7R1CA01#
0.5pF GRM1555C1H7R1DA01#
0.05pF GRM1555C1H7R2WA01#
0.ꢀpF GRM1555C1H7R2BA01#
0.ꢁ5pF GRM1555C1H7R2CA01#
0.5pF GRM1555C1H7R2DA01#
0.05pF GRM1555C1H7R3WA01#
0.ꢀpF GRM1555C1H7R3BA01#
0.ꢁ5pF GRM1555C1H7R3CA01#
0.5pF GRM1555C1H7R3DA01#
0.05pF GRM1555C1H7R4WA01#
0.ꢀpF GRM1555C1H7R4BA01#
0.ꢁ5pF GRM1555C1H7R4CA01#
0.5pF GRM1555C1H7R4DA01#
0.05pF GRM1555C1H7R5WA01#
0.ꢀpF GRM1555C1H7R5BA01#
0.ꢁ5pF GRM1555C1H7R5CA01#
0.5pF GRM1555C1H7R5DA01#
0.05pF GRM1555C1H7R6WA01#
0.ꢀpF GRM1555C1H7R6BA01#
0.ꢁ5pF GRM1555C1H7R6CA01#
0.5pF GRM1555C1H7R6DA01#
0.05pF GRM1555C1H7R7WA01#
0.ꢀpF GRM1555C1H7R7BA01#
0.ꢁ5pF GRM1555C1H7R7CA01#
0.55mm 50Vdc C0G 7.7pF
7.8pF
0.5pF GRM1555C1H7R7DA01#
0.05pF GRM1555C1H7R8WA01#
0.ꢀpF GRM1555C1H7R8BA01#
0.ꢁ5pF GRM1555C1H7R8CA01#
0.5pF GRM1555C1H7R8DA01#
0.05pF GRM1555C1H7R9WA01#
0.ꢀpF GRM1555C1H7R9BA01#
0.ꢁ5pF GRM1555C1H7R9CA01#
0.5pF GRM1555C1H7R9DA01#
0.05pF GRM1555C1H8R0WA01#
0.ꢀpF GRM1555C1H8R0BA01#
0.ꢁ5pF GRM1555C1H8R0CA01#
0.5pF GRM1555C1H8R0DA01#
0.05pF GRM1555C1H8R1WA01#
0.ꢀpF GRM1555C1H8R1BA01#
0.ꢁ5pF GRM1555C1H8R1CA01#
0.5pF GRM1555C1H8R1DA01#
0.05pF GRM1555C1H8R2WA01#
0.ꢀpF GRM1555C1H8R2BA01#
0.ꢁ5pF GRM1555C1H8R2CA01#
0.5pF GRM1555C1H8R2DA01#
0.05pF GRM1555C1H8R3WA01#
0.ꢀpF GRM1555C1H8R3BA01#
0.ꢁ5pF GRM1555C1H8R3CA01#
0.5pF GRM1555C1H8R3DA01#
0.05pF GRM1555C1H8R4WA01#
0.ꢀpF GRM1555C1H8R4BA01#
0.ꢁ5pF GRM1555C1H8R4CA01#
0.5pF GRM1555C1H8R4DA01#
0.05pF GRM1555C1H8R5WA01#
0.ꢀpF GRM1555C1H8R5BA01#
0.ꢁ5pF GRM1555C1H8R5CA01#
0.5pF GRM1555C1H8R5DA01#
0.05pF GRM1555C1H8R6WA01#
0.ꢀpF GRM1555C1H8R6BA01#
0.ꢁ5pF GRM1555C1H8R6CA01#
0.5pF GRM1555C1H8R6DA01#
0.05pF GRM1555C1H8R7WA01#
0.ꢀpF GRM1555C1H8R7BA01#
0.ꢁ5pF GRM1555C1H8R7CA01#
0.5pF GRM1555C1H8R7DA01#
0.05pF GRM1555C1H8R8WA01#
0.ꢀpF GRM1555C1H8R8BA01#
0.ꢁ5pF GRM1555C1H8R8CA01#
0.5pF GRM1555C1H8R8DA01#
0.05pF GRM1555C1H8R9WA01#
0.ꢀpF GRM1555C1H8R9BA01#
0.ꢁ5pF GRM1555C1H8R9CA01#
0.5pF GRM1555C1H8R9DA01#
0.05pF GRM1555C1H9R0WA01#
0.ꢀpF GRM1555C1H9R0BA01#
0.ꢁ5pF GRM1555C1H9R0CA01#
0.5pF GRM1555C1H9R0DA01#
0.05pF GRM1555C1H9R1WA01#
6.5pF
7.9pF
8.0pF
8.ꢀpF
8.ꢁpF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.ꢀpF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.ꢀpF
7.ꢁpF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
Part number # indicates the package specification code.
4ꢀ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc C0G 9.1pF
0.1pF GRM1555C1H9R1BA01#
0.ꢀ5pF GRM1555C1H9R1CA01#
0.5pF GRM1555C1H9R1DA01#
0.05pF GRM1555C1H9R2WA01#
0.1pF GRM1555C1H9R2BA01#
0.ꢀ5pF GRM1555C1H9R2CA01#
0.5pF GRM1555C1H9R2DA01#
0.05pF GRM1555C1H9R3WA01#
0.1pF GRM1555C1H9R3BA01#
0.ꢀ5pF GRM1555C1H9R3CA01#
0.5pF GRM1555C1H9R3DA01#
0.05pF GRM1555C1H9R4WA01#
0.1pF GRM1555C1H9R4BA01#
0.ꢀ5pF GRM1555C1H9R4CA01#
0.5pF GRM1555C1H9R4DA01#
0.05pF GRM1555C1H9R5WA01#
0.1pF GRM1555C1H9R5BA01#
0.ꢀ5pF GRM1555C1H9R5CA01#
0.5pF GRM1555C1H9R5DA01#
0.05pF GRM1555C1H9R6WA01#
0.1pF GRM1555C1H9R6BA01#
0.ꢀ5pF GRM1555C1H9R6CA01#
0.5pF GRM1555C1H9R6DA01#
0.05pF GRM1555C1H9R7WA01#
0.1pF GRM1555C1H9R7BA01#
0.ꢀ5pF GRM1555C1H9R7CA01#
0.5pF GRM1555C1H9R7DA01#
0.05pF GRM1555C1H9R8WA01#
0.1pF GRM1555C1H9R8BA01#
0.ꢀ5pF GRM1555C1H9R8CA01#
0.5pF GRM1555C1H9R8DA01#
0.05pF GRM1555C1H9R9WA01#
0.1pF GRM1555C1H9R9BA01#
0.ꢀ5pF GRM1555C1H9R9CA01#
0.5pF GRM1555C1H9R9DA01#
0.55mm 50Vdc C0G
56pF
68pF
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
GRM1555C1H560JA01#
GRM1555C1H680GA01#
GRM1555C1H680JA01#
GRM1555C1H820GA01#
GRM1555C1H820JA01#
GRM1555C1H101GA01#
GRM1555C1H101JA01#
GRM1555C1H121GA01#
GRM1555C1H121JA01#
GRM1555C1H151GA01#
GRM1555C1H151JA01#
GRM1555C1H181GA01#
GRM1555C1H181JA01#
GRM1555C1H221GA01#
GRM1555C1H221JA01#
GRM1555C1H271GA01#
GRM1555C1H271JA01#
GRM1555C1H331GA01#
GRM1555C1H331JA01#
GRM1555C1H391GA01#
GRM1555C1H391JA01#
GRM1555C1H471GA01#
GRM1555C1H471JA01#
GRM1555C1H561GA01#
GRM1555C1H561JA01#
GRM1555C1H681GA01#
GRM1555C1H681JA01#
GRM1555C1H821GA01#
GRM1555C1H821JA01#
GRM1555C1H102GA01#
GRM1555C1H102JA01#
9.ꢀpF
8ꢀpF
100pF
1ꢀ0pF
150pF
180pF
ꢀꢀ0pF
ꢀ70pF
330pF
390pF
470pF
560pF
680pF
8ꢀ0pF
1000pF
0.1pF
0.ꢀpF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
CK
0.05pF GRM1554C1HR10WA01#
0.1pF GRM1554C1HR10BA01#
0.05pF GRM1554C1HR20WA01#
0.1pF GRM1554C1HR20BA01#
0.05pF GRM1554C1HR30WA01#
0.1pF GRM1554C1HR30BA01#
0.05pF GRM1554C1HR40WA01#
0.1pF GRM1554C1HR40BA01#
0.05pF GRM1554C1HR50WA01#
0.1pF GRM1554C1HR50BA01#
0.05pF GRM1554C1HR60WA01#
0.1pF GRM1554C1HR60BA01#
0.05pF GRM1554C1HR70WA01#
0.1pF GRM1554C1HR70BA01#
0.05pF GRM1554C1HR80WA01#
0.1pF GRM1554C1HR80BA01#
0.05pF GRM1554C1HR90WA01#
0.1pF GRM1554C1HR90BA01#
0.05pF GRM1554C1H1R0WA01#
0.1pF GRM1554C1H1R0BA01#
0.ꢀ5pF GRM1554C1H1R0CA01#
0.05pF GRM1554C1H1R1WA01#
0.1pF GRM1554C1H1R1BA01#
10pF
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
GRM1555C1H100GA01#
GRM1555C1H100JA01#
GRM1555C1H120GA01#
GRM1555C1H120JA01#
GRM1555C1H150GA01#
GRM1555C1H150JA01#
GRM1555C1H180GA01#
GRM1555C1H180JA01#
GRM1555C1H220GA01#
GRM1555C1H220JA01#
GRM1555C1H270GA01#
GRM1555C1H270JA01#
GRM1555C1H330GA01#
GRM1555C1H330JA01#
GRM1555C1H390GA01#
GRM1555C1H390JA01#
GRM1555C1H470GA01#
GRM1555C1H470JA01#
GRM1555C1H560GA01#
1ꢀpF
15pF
18pF
ꢀꢀpF
ꢀ7pF
33pF
39pF
47pF
1.1pF
56pF
Part number # indicates the package specification code.
4ꢀ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc CK
1.1pF
1.ꢀpF
0.ꢀ5pF GRM1554C1H1R1CA01#
0.05pF GRM1554C1H1R2WA01#
0.1pF GRM1554C1H1R2BA01#
0.ꢀ5pF GRM1554C1H1R2CA01#
0.05pF GRM1554C1H1R3WA01#
0.1pF GRM1554C1H1R3BA01#
0.ꢀ5pF GRM1554C1H1R3CA01#
0.05pF GRM1554C1H1R4WA01#
0.1pF GRM1554C1H1R4BA01#
0.ꢀ5pF GRM1554C1H1R4CA01#
0.05pF GRM1554C1H1R5WA01#
0.1pF GRM1554C1H1R5BA01#
0.ꢀ5pF GRM1554C1H1R5CA01#
0.05pF GRM1554C1H1R6WA01#
0.1pF GRM1554C1H1R6BA01#
0.ꢀ5pF GRM1554C1H1R6CA01#
0.05pF GRM1554C1H1R7WA01#
0.1pF GRM1554C1H1R7BA01#
0.ꢀ5pF GRM1554C1H1R7CA01#
0.05pF GRM1554C1H1R8WA01#
0.1pF GRM1554C1H1R8BA01#
0.ꢀ5pF GRM1554C1H1R8CA01#
0.05pF GRM1554C1H1R9WA01#
0.1pF GRM1554C1H1R9BA01#
0.ꢀ5pF GRM1554C1H1R9CA01#
0.05pF GRM1554C1H2R0WA01#
0.1pF GRM1554C1H2R0BA01#
0.ꢀ5pF GRM1554C1H2R0CA01#
0.05pF GRM1553C1H2R1WA01#
0.1pF GRM1553C1H2R1BA01#
0.ꢀ5pF GRM1553C1H2R1CA01#
0.05pF GRM1553C1H2R2WA01#
0.1pF GRM1553C1H2R2BA01#
0.ꢀ5pF GRM1553C1H2R2CA01#
0.05pF GRM1553C1H2R3WA01#
0.1pF GRM1553C1H2R3BA01#
0.ꢀ5pF GRM1553C1H2R3CA01#
0.05pF GRM1553C1H2R4WA01#
0.1pF GRM1553C1H2R4BA01#
0.ꢀ5pF GRM1553C1H2R4CA01#
0.05pF GRM1553C1H2R5WA01#
0.1pF GRM1553C1H2R5BA01#
0.ꢀ5pF GRM1553C1H2R5CA01#
0.05pF GRM1553C1H2R6WA01#
0.1pF GRM1553C1H2R6BA01#
0.ꢀ5pF GRM1553C1H2R6CA01#
0.05pF GRM1553C1H2R7WA01#
0.1pF GRM1553C1H2R7BA01#
0.ꢀ5pF GRM1553C1H2R7CA01#
0.05pF GRM1553C1H2R8WA01#
0.1pF GRM1553C1H2R8BA01#
0.ꢀ5pF GRM1553C1H2R8CA01#
0.05pF GRM1553C1H2R9WA01#
0.1pF GRM1553C1H2R9BA01#
0.55mm 50Vdc
CJ
ꢀ.9pF
3.0pF
0.ꢀ5pF GRM1553C1H2R9CA01#
0.05pF GRM1553C1H3R0WA01#
0.1pF GRM1553C1H3R0BA01#
0.ꢀ5pF GRM1553C1H3R0CA01#
0.05pF GRM1553C1H3R1WA01#
0.1pF GRM1553C1H3R1BA01#
0.ꢀ5pF GRM1553C1H3R1CA01#
0.05pF GRM1553C1H3R2WA01#
0.1pF GRM1553C1H3R2BA01#
0.ꢀ5pF GRM1553C1H3R2CA01#
0.05pF GRM1553C1H3R3WA01#
0.1pF GRM1553C1H3R3BA01#
0.ꢀ5pF GRM1553C1H3R3CA01#
0.05pF GRM1553C1H3R4WA01#
0.1pF GRM1553C1H3R4BA01#
0.ꢀ5pF GRM1553C1H3R4CA01#
0.05pF GRM1553C1H3R5WA01#
0.1pF GRM1553C1H3R5BA01#
0.ꢀ5pF GRM1553C1H3R5CA01#
0.05pF GRM1553C1H3R6WA01#
0.1pF GRM1553C1H3R6BA01#
0.ꢀ5pF GRM1553C1H3R6CA01#
0.05pF GRM1553C1H3R7WA01#
0.1pF GRM1553C1H3R7BA01#
0.ꢀ5pF GRM1553C1H3R7CA01#
0.05pF GRM1553C1H3R8WA01#
0.1pF GRM1553C1H3R8BA01#
0.ꢀ5pF GRM1553C1H3R8CA01#
0.05pF GRM1553C1H3R9WA01#
0.1pF GRM1553C1H3R9BA01#
0.ꢀ5pF GRM1553C1H3R9CA01#
0.05pF GRM1552C1H4R0WA01#
0.1pF GRM1552C1H4R0BA01#
0.ꢀ5pF GRM1552C1H4R0CA01#
0.05pF GRM1552C1H4R1WA01#
0.1pF GRM1552C1H4R1BA01#
0.ꢀ5pF GRM1552C1H4R1CA01#
0.05pF GRM1552C1H4R2WA01#
0.1pF GRM1552C1H4R2BA01#
0.ꢀ5pF GRM1552C1H4R2CA01#
0.05pF GRM1552C1H4R3WA01#
0.1pF GRM1552C1H4R3BA01#
0.ꢀ5pF GRM1552C1H4R3CA01#
0.05pF GRM1552C1H4R4WA01#
0.1pF GRM1552C1H4R4BA01#
0.ꢀ5pF GRM1552C1H4R4CA01#
0.05pF GRM1552C1H4R5WA01#
0.1pF GRM1552C1H4R5BA01#
0.ꢀ5pF GRM1552C1H4R5CA01#
0.05pF GRM1552C1H4R6WA01#
0.1pF GRM1552C1H4R6BA01#
0.ꢀ5pF GRM1552C1H4R6CA01#
0.05pF GRM1552C1H4R7WA01#
0.1pF GRM1552C1H4R7BA01#
1.3pF
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
ꢀ.0pF
ꢀ.1pF
ꢀ.ꢀpF
ꢀ.3pF
ꢀ.4pF
ꢀ.5pF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
3.1pF
3.ꢀpF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.ꢀpF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
CJ
CH
Part number # indicates the package specification code.
43
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.ꢁ,ꢀ0ꢁꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc CH
4.7pF
4.8pF
0.ꢀ5pF GRM1552C1H4R7CA01#
0.05pF GRM1552C1H4R8WA01#
0.ꢁpF GRM1552C1H4R8BA01#
0.ꢀ5pF GRM1552C1H4R8CA01#
0.05pF GRM1552C1H4R9WA01#
0.ꢁpF GRM1552C1H4R9BA01#
0.ꢀ5pF GRM1552C1H4R9CA01#
0.05pF GRM1552C1H5R0WA01#
0.ꢁpF GRM1552C1H5R0BA01#
0.ꢀ5pF GRM1552C1H5R0CA01#
0.05pF GRM1552C1H5R1WA01#
0.ꢁpF GRM1552C1H5R1BA01#
0.ꢀ5pF GRM1552C1H5R1CA01#
0.5pF GRM1552C1H5R1DA01#
0.05pF GRM1552C1H5R2WA01#
0.ꢁpF GRM1552C1H5R2BA01#
0.ꢀ5pF GRM1552C1H5R2CA01#
0.5pF GRM1552C1H5R2DA01#
0.05pF GRM1552C1H5R3WA01#
0.ꢁpF GRM1552C1H5R3BA01#
0.ꢀ5pF GRM1552C1H5R3CA01#
0.5pF GRM1552C1H5R3DA01#
0.05pF GRM1552C1H5R4WA01#
0.ꢁpF GRM1552C1H5R4BA01#
0.ꢀ5pF GRM1552C1H5R4CA01#
0.5pF GRM1552C1H5R4DA01#
0.05pF GRM1552C1H5R5WA01#
0.ꢁpF GRM1552C1H5R5BA01#
0.ꢀ5pF GRM1552C1H5R5CA01#
0.5pF GRM1552C1H5R5DA01#
0.05pF GRM1552C1H5R6WA01#
0.ꢁpF GRM1552C1H5R6BA01#
0.ꢀ5pF GRM1552C1H5R6CA01#
0.5pF GRM1552C1H5R6DA01#
0.05pF GRM1552C1H5R7WA01#
0.ꢁpF GRM1552C1H5R7BA01#
0.ꢀ5pF GRM1552C1H5R7CA01#
0.5pF GRM1552C1H5R7DA01#
0.05pF GRM1552C1H5R8WA01#
0.ꢁpF GRM1552C1H5R8BA01#
0.ꢀ5pF GRM1552C1H5R8CA01#
0.5pF GRM1552C1H5R8DA01#
0.05pF GRM1552C1H5R9WA01#
0.ꢁpF GRM1552C1H5R9BA01#
0.ꢀ5pF GRM1552C1H5R9CA01#
0.5pF GRM1552C1H5R9DA01#
0.05pF GRM1552C1H6R0WA01#
0.ꢁpF GRM1552C1H6R0BA01#
0.ꢀ5pF GRM1552C1H6R0CA01#
0.5pF GRM1552C1H6R0DA01#
0.05pF GRM1552C1H6R1WA01#
0.ꢁpF GRM1552C1H6R1BA01#
0.ꢀ5pF GRM1552C1H6R1CA01#
0.5pF GRM1552C1H6R1DA01#
0.55mm 50Vdc CH
6.ꢀpF
0.05pF GRM1552C1H6R2WA01#
0.ꢁpF GRM1552C1H6R2BA01#
0.ꢀ5pF GRM1552C1H6R2CA01#
0.5pF GRM1552C1H6R2DA01#
0.05pF GRM1552C1H6R3WA01#
0.ꢁpF GRM1552C1H6R3BA01#
0.ꢀ5pF GRM1552C1H6R3CA01#
0.5pF GRM1552C1H6R3DA01#
0.05pF GRM1552C1H6R4WA01#
0.ꢁpF GRM1552C1H6R4BA01#
0.ꢀ5pF GRM1552C1H6R4CA01#
0.5pF GRM1552C1H6R4DA01#
0.05pF GRM1552C1H6R5WA01#
0.ꢁpF GRM1552C1H6R5BA01#
0.ꢀ5pF GRM1552C1H6R5CA01#
0.5pF GRM1552C1H6R5DA01#
0.05pF GRM1552C1H6R6WA01#
0.ꢁpF GRM1552C1H6R6BA01#
0.ꢀ5pF GRM1552C1H6R6CA01#
0.5pF GRM1552C1H6R6DA01#
0.05pF GRM1552C1H6R7WA01#
0.ꢁpF GRM1552C1H6R7BA01#
0.ꢀ5pF GRM1552C1H6R7CA01#
0.5pF GRM1552C1H6R7DA01#
0.05pF GRM1552C1H6R8WA01#
0.ꢁpF GRM1552C1H6R8BA01#
0.ꢀ5pF GRM1552C1H6R8CA01#
0.5pF GRM1552C1H6R8DA01#
0.05pF GRM1552C1H6R9WA01#
0.ꢁpF GRM1552C1H6R9BA01#
0.ꢀ5pF GRM1552C1H6R9CA01#
0.5pF GRM1552C1H6R9DA01#
0.05pF GRM1552C1H7R0WA01#
0.ꢁpF GRM1552C1H7R0BA01#
0.ꢀ5pF GRM1552C1H7R0CA01#
0.5pF GRM1552C1H7R0DA01#
0.05pF GRM1552C1H7R1WA01#
0.ꢁpF GRM1552C1H7R1BA01#
0.ꢀ5pF GRM1552C1H7R1CA01#
0.5pF GRM1552C1H7R1DA01#
0.05pF GRM1552C1H7R2WA01#
0.ꢁpF GRM1552C1H7R2BA01#
0.ꢀ5pF GRM1552C1H7R2CA01#
0.5pF GRM1552C1H7R2DA01#
0.05pF GRM1552C1H7R3WA01#
0.ꢁpF GRM1552C1H7R3BA01#
0.ꢀ5pF GRM1552C1H7R3CA01#
0.5pF GRM1552C1H7R3DA01#
0.05pF GRM1552C1H7R4WA01#
0.ꢁpF GRM1552C1H7R4BA01#
0.ꢀ5pF GRM1552C1H7R4CA01#
0.5pF GRM1552C1H7R4DA01#
0.05pF GRM1552C1H7R5WA01#
0.ꢁpF GRM1552C1H7R5BA01#
4.9pF
5.0pF
5.ꢁpF
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.ꢁpF
7.ꢀpF
7.3pF
7.4pF
7.5pF
5.ꢀpF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢁpF
Part number # indicates the package specification code.
44
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.ꢁ,ꢀ0ꢁꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc CH
7.5pF
0.ꢀ5pF GRM1552C1H7R5CA01#
0.5pF GRM1552C1H7R5DA01#
0.05pF GRM1552C1H7R6WA01#
0.ꢁpF GRM1552C1H7R6BA01#
0.ꢀ5pF GRM1552C1H7R6CA01#
0.5pF GRM1552C1H7R6DA01#
0.05pF GRM1552C1H7R7WA01#
0.ꢁpF GRM1552C1H7R7BA01#
0.ꢀ5pF GRM1552C1H7R7CA01#
0.5pF GRM1552C1H7R7DA01#
0.05pF GRM1552C1H7R8WA01#
0.ꢁpF GRM1552C1H7R8BA01#
0.ꢀ5pF GRM1552C1H7R8CA01#
0.5pF GRM1552C1H7R8DA01#
0.05pF GRM1552C1H7R9WA01#
0.ꢁpF GRM1552C1H7R9BA01#
0.ꢀ5pF GRM1552C1H7R9CA01#
0.5pF GRM1552C1H7R9DA01#
0.05pF GRM1552C1H8R0WA01#
0.ꢁpF GRM1552C1H8R0BA01#
0.ꢀ5pF GRM1552C1H8R0CA01#
0.5pF GRM1552C1H8R0DA01#
0.05pF GRM1552C1H8R1WA01#
0.ꢁpF GRM1552C1H8R1BA01#
0.ꢀ5pF GRM1552C1H8R1CA01#
0.5pF GRM1552C1H8R1DA01#
0.05pF GRM1552C1H8R2WA01#
0.ꢁpF GRM1552C1H8R2BA01#
0.ꢀ5pF GRM1552C1H8R2CA01#
0.5pF GRM1552C1H8R2DA01#
0.05pF GRM1552C1H8R3WA01#
0.ꢁpF GRM1552C1H8R3BA01#
0.ꢀ5pF GRM1552C1H8R3CA01#
0.5pF GRM1552C1H8R3DA01#
0.05pF GRM1552C1H8R4WA01#
0.ꢁpF GRM1552C1H8R4BA01#
0.ꢀ5pF GRM1552C1H8R4CA01#
0.5pF GRM1552C1H8R4DA01#
0.05pF GRM1552C1H8R5WA01#
0.ꢁpF GRM1552C1H8R5BA01#
0.ꢀ5pF GRM1552C1H8R5CA01#
0.5pF GRM1552C1H8R5DA01#
0.05pF GRM1552C1H8R6WA01#
0.ꢁpF GRM1552C1H8R6BA01#
0.ꢀ5pF GRM1552C1H8R6CA01#
0.5pF GRM1552C1H8R6DA01#
0.05pF GRM1552C1H8R7WA01#
0.ꢁpF GRM1552C1H8R7BA01#
0.ꢀ5pF GRM1552C1H8R7CA01#
0.5pF GRM1552C1H8R7DA01#
0.05pF GRM1552C1H8R8WA01#
0.ꢁpF GRM1552C1H8R8BA01#
0.ꢀ5pF GRM1552C1H8R8CA01#
0.5pF GRM1552C1H8R8DA01#
0.55mm 50Vdc CH
8.9pF
0.05pF GRM1552C1H8R9WA01#
0.ꢁpF GRM1552C1H8R9BA01#
0.ꢀ5pF GRM1552C1H8R9CA01#
0.5pF GRM1552C1H8R9DA01#
0.05pF GRM1552C1H9R0WA01#
0.ꢁpF GRM1552C1H9R0BA01#
0.ꢀ5pF GRM1552C1H9R0CA01#
0.5pF GRM1552C1H9R0DA01#
0.05pF GRM1552C1H9R1WA01#
0.ꢁpF GRM1552C1H9R1BA01#
0.ꢀ5pF GRM1552C1H9R1CA01#
0.5pF GRM1552C1H9R1DA01#
0.05pF GRM1552C1H9R2WA01#
0.ꢁpF GRM1552C1H9R2BA01#
0.ꢀ5pF GRM1552C1H9R2CA01#
0.5pF GRM1552C1H9R2DA01#
0.05pF GRM1552C1H9R3WA01#
0.ꢁpF GRM1552C1H9R3BA01#
0.ꢀ5pF GRM1552C1H9R3CA01#
0.5pF GRM1552C1H9R3DA01#
0.05pF GRM1552C1H9R4WA01#
0.ꢁpF GRM1552C1H9R4BA01#
0.ꢀ5pF GRM1552C1H9R4CA01#
0.5pF GRM1552C1H9R4DA01#
0.05pF GRM1552C1H9R5WA01#
0.ꢁpF GRM1552C1H9R5BA01#
0.ꢀ5pF GRM1552C1H9R5CA01#
0.5pF GRM1552C1H9R5DA01#
0.05pF GRM1552C1H9R6WA01#
0.ꢁpF GRM1552C1H9R6BA01#
0.ꢀ5pF GRM1552C1H9R6CA01#
0.5pF GRM1552C1H9R6DA01#
0.05pF GRM1552C1H9R7WA01#
0.ꢁpF GRM1552C1H9R7BA01#
0.ꢀ5pF GRM1552C1H9R7CA01#
0.5pF GRM1552C1H9R7DA01#
0.05pF GRM1552C1H9R8WA01#
0.ꢁpF GRM1552C1H9R8BA01#
0.ꢀ5pF GRM1552C1H9R8CA01#
0.5pF GRM1552C1H9R8DA01#
0.05pF GRM1552C1H9R9WA01#
0.ꢁpF GRM1552C1H9R9BA01#
0.ꢀ5pF GRM1552C1H9R9CA01#
0.5pF GRM1552C1H9R9DA01#
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.ꢁpF
8.ꢀpF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
9.0pF
9.ꢁpF
9.ꢀpF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
ꢁ0pF
ꢁꢀpF
ꢁ5pF
ꢁ8pF
ꢀꢀpF
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
GRM1552C1H100GA01#
GRM1552C1H100JA01#
GRM1552C1H120GA01#
GRM1552C1H120JA01#
GRM1552C1H150GA01#
GRM1552C1H150JA01#
GRM1552C1H180GA01#
GRM1552C1H180JA01#
GRM1552C1H220GA01#
GRM1552C1H220JA01#
Part number # indicates the package specification code.
45
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc CH
27pF
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
GRM1552C1H270GA01#
GRM1552C1H270JA01#
GRM1552C1H330GA01#
GRM1552C1H330JA01#
GRM1552C1H390GA01#
GRM1552C1H390JA01#
GRM1552C1H470GA01#
GRM1552C1H470JA01#
GRM1552C1H560GA01#
GRM1552C1H560JA01#
GRM1552C1H680GA01#
GRM1552C1H680JA01#
GRM1552C1H820GA01#
GRM1552C1H820JA01#
GRM1552C1H101GA01#
GRM1552C1H101JA01#
GRM1552C1H121GA01#
GRM1552C1H121JA01#
GRM1552C1H151GA01#
GRM1552C1H151JA01#
GRM1552C1H181GA01#
GRM1552C1H181JA01#
GRM1552C1H221GA01#
GRM1552C1H221JA01#
GRM1552C1H271GA01#
GRM1552C1H271JA01#
GRM1552C1H331GA01#
GRM1552C1H331JA01#
GRM1552C1H391GA01#
GRM1552C1H391JA01#
GRM1552C1H471GA01#
GRM1552C1H471JA01#
GRM1552C1H561GA01#
GRM1552C1H561JA01#
GRM1552C1H681GA01#
GRM1552C1H681JA01#
GRM1552C1H821GA01#
GRM1552C1H821JA01#
GRM1552C1H102GA01#
GRM1552C1H102JA01#
0.55mm 50Vdc P2H
PK
27pF
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
5ꢀ
GRM1556P1H270JZ01#
0.25pF GRM1554P1H1R0CZ01#
0.25pF GRM1554P1H2R0CZ01#
0.25pF GRM1553P1H3R0CZ01#
0.25pF GRM1552P1H4R0CZ01#
0.25pF GRM1552P1H5R0CZ01#
0.5pF GRM1552P1H6R0DZ01#
0.5pF GRM1552P1H7R0DZ01#
0.5pF GRM1552P1H8R0DZ01#
0.5pF GRM1552P1H9R0DZ01#
33pF
39pF
PJ
PH
47pF
56pF
68pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1552P1H100JZ01#
GRM1552P1H120JZ01#
GRM1552P1H150JZ01#
GRM1552P1H180JZ01#
GRM1552P1H220JZ01#
GRM1552P1H270JZ01#
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
R2H 1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
0.25pF GRM1556R1H1R0CD01#
0.25pF GRM1556R1H2R0CZ01#
0.25pF GRM1556R1H3R0CZ01#
0.25pF GRM1556R1H4R0CZ01#
0.25pF GRM1556R1H5R0CZ01#
0.5pF GRM1556R1H6R0DZ01#
0.5pF GRM1556R1H7R0DZ01#
0.5pF GRM1556R1H8R0DZ01#
0.5pF GRM1556R1H9R0DZ01#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1556R1H100JZ01#
GRM1556R1H120JZ01#
GRM1556R1H150JZ01#
GRM1556R1H180JZ01#
GRM1556R1H220JZ01#
GRM1556R1H270JZ01#
GRM1556R1H330JZ01#
12pF
15pF
18pF
22pF
27pF
33pF
RK
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
0.25pF GRM1554R1H1R0CD01#
0.25pF GRM1554R1H2R0CZ01#
0.25pF GRM1553R1H3R0CZ01#
0.25pF GRM1552R1H4R0CZ01#
0.25pF GRM1552R1H5R0CZ01#
0.5pF GRM1552R1H6R0DZ01#
0.5pF GRM1552R1H7R0DZ01#
0.5pF GRM1552R1H8R0DZ01#
0.5pF GRM1552R1H9R0DZ01#
RJ
RH
P2H 1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
0.25pF GRM1556P1H1R0CZ01#
0.25pF GRM1556P1H2R0CZ01#
0.25pF GRM1556P1H3R0CZ01#
0.25pF GRM1556P1H4R0CZ01#
0.25pF GRM1556P1H5R0CZ01#
0.5pF GRM1556P1H6R0DZ01#
0.5pF GRM1556P1H7R0DZ01#
0.5pF GRM1556P1H8R0DZ01#
0.5pF GRM1556P1H9R0DZ01#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1552R1H100JZ01#
GRM1552R1H120JZ01#
GRM1552R1H150JZ01#
GRM1552R1H180JZ01#
GRM1552R1H220JZ01#
GRM1552R1H270JZ01#
GRM1552R1H330JZ01#
S2H 1.0pF
2.0pF
0.25pF GRM1556S1H1R0CD01#
0.25pF GRM1556S1H2R0CZ01#
0.25pF GRM1556S1H3R0CZ01#
0.25pF GRM1556S1H4R0CZ01#
0.25pF GRM1556S1H5R0CZ01#
0.5pF GRM1556S1H6R0DZ01#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1556P1H100JZ01#
GRM1556P1H120JZ01#
GRM1556P1H150JZ01#
GRM1556P1H180JZ01#
GRM1556P1H220JZ01#
12pF
3.0pF
15pF
4.0pF
18pF
5.0pF
22pF
6.0pF
Part number # indicates the package specification code.
46
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc S2H 7.0pF
0.5pF GRM1556S1H7R0DZ01#
0.5pF GRM1556S1H8R0DZ01#
0.5pF GRM1556S1H9R0DZ01#
0.55mm 50Vdc TH
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
0.25pF GRM1552T1H5R0CD01#
0.5pF GRM1552T1H6R0DD01#
0.5pF GRM1552T1H7R0DD01#
0.5pF GRM1552T1H8R0DD01#
0.5pF GRM1552T1H9R0DD01#
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1556S1H100JZ01#
GRM1556S1H120JZ01#
GRM1556S1H150JZ01#
GRM1556S1H180JZ01#
GRM1556S1H220JZ01#
GRM1556S1H270JZ01#
GRM1556S1H330JZ01#
GRM1556S1H390JZ01#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1552T1H100JD01#
GRM1552T1H120JD01#
GRM1552T1H150JD01#
GRM1552T1H180JD01#
GRM1552T1H220JD01#
GRM1552T1H270JD01#
GRM1552T1H330JD01#
GRM1552T1H390JD01#
GRM1552T1H470JD01#
GRM1552T1H560JD01#
GRM1552T1H680JD01#
GRM1552T1H820JD01#
GRM1552T1H101JD01#
SK
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
1.0pF
2.0pF
3.0pF
4.0pF
5.0pF
6.0pF
7.0pF
8.0pF
9.0pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
1.0pF
2.0pF
3.0pF
4.0pF
0.25pF GRM1554S1H1R0CD01#
0.25pF GRM1554S1H2R0CZ01#
0.25pF GRM1553S1H3R0CZ01#
0.25pF GRM1552S1H4R0CZ01#
0.25pF GRM1552S1H5R0CZ01#
0.5pF GRM1552S1H6R0DZ01#
0.5pF GRM1552S1H7R0DZ01#
0.5pF GRM1552S1H8R0DZ01#
0.5pF GRM1552S1H9R0DZ01#
SJ
SH
UK
UJ
0.25pF GRM1554U1H1R0CZ01#
0.25pF GRM1554U1H2R0CZ01#
0.25pF GRM1553U1H3R0CZ01#
0.25pF GRM1553U1H4R0CZ01#
0.25pF GRM1553U1H5R0CZ01#
0.5pF GRM1553U1H6R0DZ01#
0.5pF GRM1553U1H7R0DZ01#
0.5pF GRM1553U1H8R0DZ01#
0.5pF GRM1553U1H9R0DZ01#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1552S1H100JZ01#
GRM1552S1H120JZ01#
GRM1552S1H150JZ01#
GRM1552S1H180JZ01#
GRM1552S1H220JZ01#
GRM1552S1H270JZ01#
GRM1552S1H330JZ01#
GRM1552S1H390JZ01#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1553U1H100JZ01#
GRM1553U1H120JZ01#
GRM1553U1H150JZ01#
GRM1553U1H180JZ01#
GRM1553U1H220JZ01#
GRM1553U1H270JZ01#
GRM1553U1H330JZ01#
GRM1553U1H390JZ01#
GRM1553U1H470JZ01#
GRM1553U1H560JZ01#
GRM1553U1H680JZ01#
GRM1553U1H820JZ01#
GRM1553U1H101JZ01#
GRM1553U1H121JZ01#
GRM1553U1H151JZ01#
GRM1553U1H181JZ01#
GRM1551X1A122JA01#
GRM1551X1A152JA01#
GRM1551X1A182JA01#
GRM1551X1A222JA01#
GRM1551X1A272JA01#
GRM1551X1A332JA01#
GRM1551X1A392JA01#
GRM1551X1A472JA01#
GRM1557U1A122JA01#
GRM1557U1A152JA01#
GRM1557U1A182JA01#
T2H
0.25pF GRM1556T1H1R0CD01#
0.25pF GRM1556T1H2R0CD01#
0.25pF GRM1556T1H3R0CD01#
0.25pF GRM1556T1H4R0CD01#
0.25pF GRM1556T1H5R0CD01#
0.5pF GRM1556T1H6R0DD01#
0.5pF GRM1556T1H7R0DD01#
0.5pF GRM1556T1H8R0DD01#
0.5pF GRM1556T1H9R0DD01#
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1556T1H100JD01#
GRM1556T1H120JD01#
GRM1556T1H150JD01#
GRM1556T1H180JD01#
GRM1556T1H220JD01#
GRM1556T1H270JD01#
GRM1556T1H330JD01#
GRM1556T1H390JD01#
GRM1556T1H470JD01#
GRM1556T1H560JD01#
GRM1556T1H680JD01#
GRM1556T1H820JD01#
GRM1556T1H101JD01#
10Vdc
SL 1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
TK
0.25pF GRM1554T1H1R0CD01#
0.25pF GRM1554T1H2R0CD01#
0.25pF GRM1553T1H3R0CD01#
0.25pF GRM1552T1H4R0CD01#
4700pF
U2J 1200pF
1500pF
TJ
TH
1800pF
Part number # indicates the package specification code.
47
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 10Vdc U2J 2200pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1557U1A222JA01#
GRM1557U1A272JA01#
GRM1557U1A332JA01#
GRM1557U1A392JA01#
GRM1557U1A472JA01#
GRM1553U1A122JA01#
GRM1553U1A152JA01#
GRM1553U1A182JA01#
GRM1553U1A222JA01#
GRM1553U1A272JA01#
GRM1553U1A332JA01#
GRM1553U1A392JA01#
GRM1553U1A472JA01#
0.9mm 100Vdc C0G 0.9pF
1.0pF
0.1pF GRM1885C2AR90BA01#
0.05pF GRM1885C2A1R0WA01#
0.1pF GRM1885C2A1R0BA01#
0.25pF GRM1885C2A1R0CA01#
0.05pF GRM1885C2A1R1WA01#
0.1pF GRM1885C2A1R1BA01#
0.25pF GRM1885C2A1R1CA01#
0.05pF GRM1885C2A1R2WA01#
0.1pF GRM1885C2A1R2BA01#
0.25pF GRM1885C2A1R2CA01#
0.05pF GRM1885C2A1R3WA01#
0.1pF GRM1885C2A1R3BA01#
0.25pF GRM1885C2A1R3CA01#
0.05pF GRM1885C2A1R4WA01#
0.1pF GRM1885C2A1R4BA01#
0.25pF GRM1885C2A1R4CA01#
0.05pF GRM1885C2A1R5WA01#
0.1pF GRM1885C2A1R5BA01#
0.25pF GRM1885C2A1R5CA01#
0.05pF GRM1885C2A1R6WA01#
0.1pF GRM1885C2A1R6BA01#
0.25pF GRM1885C2A1R6CA01#
0.05pF GRM1885C2A1R7WA01#
0.1pF GRM1885C2A1R7BA01#
0.25pF GRM1885C2A1R7CA01#
0.05pF GRM1885C2A1R8WA01#
0.1pF GRM1885C2A1R8BA01#
0.25pF GRM1885C2A1R8CA01#
0.05pF GRM1885C2A1R9WA01#
0.1pF GRM1885C2A1R9BA01#
0.25pF GRM1885C2A1R9CA01#
0.05pF GRM1885C2A2R0WA01#
0.1pF GRM1885C2A2R0BA01#
0.25pF GRM1885C2A2R0CA01#
0.05pF GRM1885C2A2R1WA01#
0.1pF GRM1885C2A2R1BA01#
0.25pF GRM1885C2A2R1CA01#
0.05pF GRM1885C2A2R2WA01#
0.1pF GRM1885C2A2R2BA01#
0.25pF GRM1885C2A2R2CA01#
0.05pF GRM1885C2A2R3WA01#
0.1pF GRM1885C2A2R3BA01#
0.25pF GRM1885C2A2R3CA01#
0.05pF GRM1885C2A2R4WA01#
0.1pF GRM1885C2A2R4BA01#
0.25pF GRM1885C2A2R4CA01#
0.05pF GRM1885C2A2R5WA01#
0.1pF GRM1885C2A2R5BA01#
0.25pF GRM1885C2A2R5CA01#
0.05pF GRM1885C2A2R6WA01#
0.1pF GRM1885C2A2R6BA01#
0.25pF GRM1885C2A2R6CA01#
0.05pF GRM1885C2A2R7WA01#
0.1pF GRM1885C2A2R7BA01#
2700pF
3300pF
3900pF
4700pF
1.1pF
1.2pF
1.3pF
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
2.2pF
2.3pF
2.4pF
2.5pF
2.6pF
2.7pF
UJ 1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
1.6×0.8mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.5mm 50Vdc
SL 2200pF
2700pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1851X1H222JA44#
GRM1851X1H272JA44#
GRM1851X1H332JA44#
GRM1851X1H392JA44#
GRM1851X1H472JA44#
GRM1857U1H222JA44#
GRM1857U1H272JA44#
GRM1857U1H332JA44#
GRM1857U1H392JA44#
GRM1857U1H472JA44#
GRM1853U1H222JA44#
GRM1853U1H272JA44#
GRM1853U1H332JA44#
GRM1853U1H392JA44#
GRM1853U1H472JA44#
GRM1851X1A562JA44#
GRM1851X1A682JA44#
GRM1851X1A822JA44#
GRM1851X1A103JA44#
GRM1857U1A562JA44#
GRM1857U1A682JA44#
GRM1857U1A822JA44#
GRM1857U1A103JA44#
GRM1853U1A562JA44#
GRM1853U1A682JA44#
GRM1853U1A822JA44#
GRM1853U1A103JA44#
3300pF
3900pF
4700pF
U2J 2200pF
2700pF
3300pF
3900pF
4700pF
UJ 2200pF
2700pF
3300pF
3900pF
4700pF
10Vdc
SL 5600pF
6800pF
8200pF
10000pF
U2J 5600pF
6800pF
8200pF
10000pF
UJ 5600pF
6800pF
8200pF
10000pF
0.9mm 100Vdc C0G 0.5pF
0.05pF GRM1885C2AR50WA01#
0.1pF GRM1885C2AR50BA01#
0.05pF GRM1885C2AR60WA01#
0.1pF GRM1885C2AR60BA01#
0.05pF GRM1885C2AR70WA01#
0.1pF GRM1885C2AR70BA01#
0.05pF GRM1885C2AR80WA01#
0.1pF GRM1885C2AR80BA01#
0.05pF GRM1885C2AR90WA01#
0.6pF
0.7pF
0.8pF
0.9pF
Part number # indicates the package specification code.
48
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc C0G 2.7pF
2.8pF
0.2ꢀpF GRM1885C2A2R7CA01#
0.0ꢀpF GRM1885C2A2R8WA01#
0.1pF GRM1885C2A2R8BA01#
0.2ꢀpF GRM1885C2A2R8CA01#
0.0ꢀpF GRM1885C2A2R9WA01#
0.1pF GRM1885C2A2R9BA01#
0.2ꢀpF GRM1885C2A2R9CA01#
0.0ꢀpF GRM1885C2A3R0WA01#
0.1pF GRM1885C2A3R0BA01#
0.2ꢀpF GRM1885C2A3R0CA01#
0.0ꢀpF GRM1885C2A3R1WA01#
0.1pF GRM1885C2A3R1BA01#
0.2ꢀpF GRM1885C2A3R1CA01#
0.0ꢀpF GRM1885C2A3R2WA01#
0.1pF GRM1885C2A3R2BA01#
0.2ꢀpF GRM1885C2A3R2CA01#
0.0ꢀpF GRM1885C2A3R3WA01#
0.1pF GRM1885C2A3R3BA01#
0.2ꢀpF GRM1885C2A3R3CA01#
0.0ꢀpF GRM1885C2A3R4WA01#
0.1pF GRM1885C2A3R4BA01#
0.2ꢀpF GRM1885C2A3R4CA01#
0.0ꢀpF GRM1885C2A3R5WA01#
0.1pF GRM1885C2A3R5BA01#
0.2ꢀpF GRM1885C2A3R5CA01#
0.0ꢀpF GRM1885C2A3R6WA01#
0.1pF GRM1885C2A3R6BA01#
0.2ꢀpF GRM1885C2A3R6CA01#
0.0ꢀpF GRM1885C2A3R7WA01#
0.1pF GRM1885C2A3R7BA01#
0.2ꢀpF GRM1885C2A3R7CA01#
0.0ꢀpF GRM1885C2A3R8WA01#
0.1pF GRM1885C2A3R8BA01#
0.2ꢀpF GRM1885C2A3R8CA01#
0.0ꢀpF GRM1885C2A3R9WA01#
0.1pF GRM1885C2A3R9BA01#
0.2ꢀpF GRM1885C2A3R9CA01#
0.0ꢀpF GRM1885C2A4R0WA01#
0.1pF GRM1885C2A4R0BA01#
0.2ꢀpF GRM1885C2A4R0CA01#
0.0ꢀpF GRM1885C2A4R1WA01#
0.1pF GRM1885C2A4R1BA01#
0.2ꢀpF GRM1885C2A4R1CA01#
0.0ꢀpF GRM1885C2A4R2WA01#
0.1pF GRM1885C2A4R2BA01#
0.2ꢀpF GRM1885C2A4R2CA01#
0.0ꢀpF GRM1885C2A4R3WA01#
0.1pF GRM1885C2A4R3BA01#
0.2ꢀpF GRM1885C2A4R3CA01#
0.0ꢀpF GRM1885C2A4R4WA01#
0.1pF GRM1885C2A4R4BA01#
0.2ꢀpF GRM1885C2A4R4CA01#
0.0ꢀpF GRM1885C2A4R5WA01#
0.1pF GRM1885C2A4R5BA01#
0.9mm 100Vdc C0G 4.ꢀpF
4.6pF
0.2ꢀpF GRM1885C2A4R5CA01#
0.0ꢀpF GRM1885C2A4R6WA01#
0.1pF GRM1885C2A4R6BA01#
0.2ꢀpF GRM1885C2A4R6CA01#
0.0ꢀpF GRM1885C2A4R7WA01#
0.1pF GRM1885C2A4R7BA01#
0.2ꢀpF GRM1885C2A4R7CA01#
0.0ꢀpF GRM1885C2A4R8WA01#
0.1pF GRM1885C2A4R8BA01#
0.2ꢀpF GRM1885C2A4R8CA01#
0.0ꢀpF GRM1885C2A4R9WA01#
0.1pF GRM1885C2A4R9BA01#
0.2ꢀpF GRM1885C2A4R9CA01#
0.0ꢀpF GRM1885C2A5R0WA01#
0.1pF GRM1885C2A5R0BA01#
0.2ꢀpF GRM1885C2A5R0CA01#
0.0ꢀpF GRM1885C2A5R1WA01#
0.1pF GRM1885C2A5R1BA01#
0.2ꢀpF GRM1885C2A5R1CA01#
0.ꢀpF GRM1885C2A5R1DA01#
0.0ꢀpF GRM1885C2A5R2WA01#
0.1pF GRM1885C2A5R2BA01#
0.2ꢀpF GRM1885C2A5R2CA01#
0.ꢀpF GRM1885C2A5R2DA01#
0.0ꢀpF GRM1885C2A5R3WA01#
0.1pF GRM1885C2A5R3BA01#
0.2ꢀpF GRM1885C2A5R3CA01#
0.ꢀpF GRM1885C2A5R3DA01#
0.0ꢀpF GRM1885C2A5R4WA01#
0.1pF GRM1885C2A5R4BA01#
0.2ꢀpF GRM1885C2A5R4CA01#
0.ꢀpF GRM1885C2A5R4DA01#
0.0ꢀpF GRM1885C2A5R5WA01#
0.1pF GRM1885C2A5R5BA01#
0.2ꢀpF GRM1885C2A5R5CA01#
0.ꢀpF GRM1885C2A5R5DA01#
0.0ꢀpF GRM1885C2A5R6WA01#
0.1pF GRM1885C2A5R6BA01#
0.2ꢀpF GRM1885C2A5R6CA01#
0.ꢀpF GRM1885C2A5R6DA01#
0.0ꢀpF GRM1885C2A5R7WA01#
0.1pF GRM1885C2A5R7BA01#
0.2ꢀpF GRM1885C2A5R7CA01#
0.ꢀpF GRM1885C2A5R7DA01#
0.0ꢀpF GRM1885C2A5R8WA01#
0.1pF GRM1885C2A5R8BA01#
0.2ꢀpF GRM1885C2A5R8CA01#
0.ꢀpF GRM1885C2A5R8DA01#
0.0ꢀpF GRM1885C2A5R9WA01#
0.1pF GRM1885C2A5R9BA01#
0.2ꢀpF GRM1885C2A5R9CA01#
0.ꢀpF GRM1885C2A5R9DA01#
0.0ꢀpF GRM1885C2A6R0WA01#
0.1pF GRM1885C2A6R0BA01#
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.ꢀpF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.2pF
4.3pF
4.4pF
4.ꢀpF
4.7pF
4.8pF
4.9pF
ꢀ.0pF
ꢀ.1pF
ꢀ.2pF
ꢀ.3pF
ꢀ.4pF
ꢀ.ꢀpF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
6.0pF
Part number # indicates the package specification code.
49
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc C0G 6.0pF
6.1pF
0.ꢀ2pF GRM1885C2A6R0CA01#
0.2pF GRM1885C2A6R0DA01#
0.02pF GRM1885C2A6R1WA01#
0.1pF GRM1885C2A6R1BA01#
0.ꢀ2pF GRM1885C2A6R1CA01#
0.2pF GRM1885C2A6R1DA01#
0.02pF GRM1885C2A6R2WA01#
0.1pF GRM1885C2A6R2BA01#
0.ꢀ2pF GRM1885C2A6R2CA01#
0.2pF GRM1885C2A6R2DA01#
0.02pF GRM1885C2A6R3WA01#
0.1pF GRM1885C2A6R3BA01#
0.ꢀ2pF GRM1885C2A6R3CA01#
0.2pF GRM1885C2A6R3DA01#
0.02pF GRM1885C2A6R4WA01#
0.1pF GRM1885C2A6R4BA01#
0.ꢀ2pF GRM1885C2A6R4CA01#
0.2pF GRM1885C2A6R4DA01#
0.02pF GRM1885C2A6R5WA01#
0.1pF GRM1885C2A6R5BA01#
0.ꢀ2pF GRM1885C2A6R5CA01#
0.2pF GRM1885C2A6R5DA01#
0.02pF GRM1885C2A6R6WA01#
0.1pF GRM1885C2A6R6BA01#
0.ꢀ2pF GRM1885C2A6R6CA01#
0.2pF GRM1885C2A6R6DA01#
0.02pF GRM1885C2A6R7WA01#
0.1pF GRM1885C2A6R7BA01#
0.ꢀ2pF GRM1885C2A6R7CA01#
0.2pF GRM1885C2A6R7DA01#
0.02pF GRM1885C2A6R8WA01#
0.1pF GRM1885C2A6R8BA01#
0.ꢀ2pF GRM1885C2A6R8CA01#
0.2pF GRM1885C2A6R8DA01#
0.02pF GRM1885C2A6R9WA01#
0.1pF GRM1885C2A6R9BA01#
0.ꢀ2pF GRM1885C2A6R9CA01#
0.2pF GRM1885C2A6R9DA01#
0.02pF GRM1885C2A7R0WA01#
0.1pF GRM1885C2A7R0BA01#
0.ꢀ2pF GRM1885C2A7R0CA01#
0.2pF GRM1885C2A7R0DA01#
0.02pF GRM1885C2A7R1WA01#
0.1pF GRM1885C2A7R1BA01#
0.ꢀ2pF GRM1885C2A7R1CA01#
0.2pF GRM1885C2A7R1DA01#
0.02pF GRM1885C2A7R2WA01#
0.1pF GRM1885C2A7R2BA01#
0.ꢀ2pF GRM1885C2A7R2CA01#
0.2pF GRM1885C2A7R2DA01#
0.02pF GRM1885C2A7R3WA01#
0.1pF GRM1885C2A7R3BA01#
0.ꢀ2pF GRM1885C2A7R3CA01#
0.2pF GRM1885C2A7R3DA01#
0.9mm 100Vdc C0G 7.4pF
0.02pF GRM1885C2A7R4WA01#
0.1pF GRM1885C2A7R4BA01#
0.ꢀ2pF GRM1885C2A7R4CA01#
0.2pF GRM1885C2A7R4DA01#
0.02pF GRM1885C2A7R5WA01#
0.1pF GRM1885C2A7R5BA01#
0.ꢀ2pF GRM1885C2A7R5CA01#
0.2pF GRM1885C2A7R5DA01#
0.02pF GRM1885C2A7R6WA01#
0.1pF GRM1885C2A7R6BA01#
0.ꢀ2pF GRM1885C2A7R6CA01#
0.2pF GRM1885C2A7R6DA01#
0.02pF GRM1885C2A7R7WA01#
0.1pF GRM1885C2A7R7BA01#
0.ꢀ2pF GRM1885C2A7R7CA01#
0.2pF GRM1885C2A7R7DA01#
0.02pF GRM1885C2A7R8WA01#
0.1pF GRM1885C2A7R8BA01#
0.ꢀ2pF GRM1885C2A7R8CA01#
0.2pF GRM1885C2A7R8DA01#
0.02pF GRM1885C2A7R9WA01#
0.1pF GRM1885C2A7R9BA01#
0.ꢀ2pF GRM1885C2A7R9CA01#
0.2pF GRM1885C2A7R9DA01#
0.02pF GRM1885C2A8R0WA01#
0.1pF GRM1885C2A8R0BA01#
0.ꢀ2pF GRM1885C2A8R0CA01#
0.2pF GRM1885C2A8R0DA01#
0.02pF GRM1885C2A8R1WA01#
0.1pF GRM1885C2A8R1BA01#
0.ꢀ2pF GRM1885C2A8R1CA01#
0.2pF GRM1885C2A8R1DA01#
0.02pF GRM1885C2A8R2WA01#
0.1pF GRM1885C2A8R2BA01#
0.ꢀ2pF GRM1885C2A8R2CA01#
0.2pF GRM1885C2A8R2DA01#
0.02pF GRM1885C2A8R3WA01#
0.1pF GRM1885C2A8R3BA01#
0.ꢀ2pF GRM1885C2A8R3CA01#
0.2pF GRM1885C2A8R3DA01#
0.02pF GRM1885C2A8R4WA01#
0.1pF GRM1885C2A8R4BA01#
0.ꢀ2pF GRM1885C2A8R4CA01#
0.2pF GRM1885C2A8R4DA01#
0.02pF GRM1885C2A8R5WA01#
0.1pF GRM1885C2A8R5BA01#
0.ꢀ2pF GRM1885C2A8R5CA01#
0.2pF GRM1885C2A8R5DA01#
0.02pF GRM1885C2A8R6WA01#
0.1pF GRM1885C2A8R6BA01#
0.ꢀ2pF GRM1885C2A8R6CA01#
0.2pF GRM1885C2A8R6DA01#
0.02pF GRM1885C2A8R7WA01#
0.1pF GRM1885C2A8R7BA01#
7.2pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.1pF
8.ꢀpF
8.3pF
8.4pF
8.2pF
8.6pF
8.7pF
6.ꢀpF
6.3pF
6.4pF
6.2pF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.1pF
7.ꢀpF
7.3pF
Part number # indicates the package specification code.
20
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc C0G 8.7pF
8.8pF
0.ꢀ2pF GRM1885C2A8R7CA01#
0.2pF GRM1885C2A8R7DA01#
0.02pF GRM1885C2A8R8WA01#
0.1pF GRM1885C2A8R8BA01#
0.ꢀ2pF GRM1885C2A8R8CA01#
0.2pF GRM1885C2A8R8DA01#
0.02pF GRM1885C2A8R9WA01#
0.1pF GRM1885C2A8R9BA01#
0.ꢀ2pF GRM1885C2A8R9CA01#
0.2pF GRM1885C2A8R9DA01#
0.02pF GRM1885C2A9R0WA01#
0.1pF GRM1885C2A9R0BA01#
0.ꢀ2pF GRM1885C2A9R0CA01#
0.2pF GRM1885C2A9R0DA01#
0.02pF GRM1885C2A9R1WA01#
0.1pF GRM1885C2A9R1BA01#
0.ꢀ2pF GRM1885C2A9R1CA01#
0.2pF GRM1885C2A9R1DA01#
0.02pF GRM1885C2A9R2WA01#
0.1pF GRM1885C2A9R2BA01#
0.ꢀ2pF GRM1885C2A9R2CA01#
0.2pF GRM1885C2A9R2DA01#
0.02pF GRM1885C2A9R3WA01#
0.1pF GRM1885C2A9R3BA01#
0.ꢀ2pF GRM1885C2A9R3CA01#
0.2pF GRM1885C2A9R3DA01#
0.02pF GRM1885C2A9R4WA01#
0.1pF GRM1885C2A9R4BA01#
0.ꢀ2pF GRM1885C2A9R4CA01#
0.2pF GRM1885C2A9R4DA01#
0.02pF GRM1885C2A9R5WA01#
0.1pF GRM1885C2A9R5BA01#
0.ꢀ2pF GRM1885C2A9R5CA01#
0.2pF GRM1885C2A9R5DA01#
0.02pF GRM1885C2A9R6WA01#
0.1pF GRM1885C2A9R6BA01#
0.ꢀ2pF GRM1885C2A9R6CA01#
0.2pF GRM1885C2A9R6DA01#
0.02pF GRM1885C2A9R7WA01#
0.1pF GRM1885C2A9R7BA01#
0.ꢀ2pF GRM1885C2A9R7CA01#
0.2pF GRM1885C2A9R7DA01#
0.02pF GRM1885C2A9R8WA01#
0.1pF GRM1885C2A9R8BA01#
0.ꢀ2pF GRM1885C2A9R8CA01#
0.2pF GRM1885C2A9R8DA01#
0.02pF GRM1885C2A9R9WA01#
0.1pF GRM1885C2A9R9BA01#
0.ꢀ2pF GRM1885C2A9R9CA01#
0.2pF GRM1885C2A9R9DA01#
0.9mm 100Vdc C0G
ꢀꢀpF
ꢀ7pF
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
GRM1885C2A220JA01#
GRM1885C2A270JA01#
GRM1885C2A330JA01#
GRM1885C2A390JA01#
GRM1885C2A470JA01#
GRM1885C2A560JA01#
GRM1885C2A680JA01#
GRM1885C2A820JA01#
GRM1885C2A101JA01#
GRM1885C2A121JA01#
GRM1885C2A151JA01#
GRM1885C2A181JA01#
GRM1885C2A221JA01#
GRM1885C2A271JA01#
GRM1885C2A331JA01#
GRM1885C2A391JA01#
GRM1885C2A471JA01#
GRM1885C2A561JA01#
GRM1885C2A681JA01#
GRM1885C2A821JA01#
GRM1885C2A102JA01#
GRM1885C2A122JA01#
GRM1885C2A152JA01#
33pF
39pF
47pF
26pF
8.9pF
9.0pF
9.1pF
9.ꢀpF
9.3pF
9.4pF
9.2pF
9.6pF
9.7pF
9.8pF
9.9pF
68pF
8ꢀpF
100pF
1ꢀ0pF
120pF
180pF
ꢀꢀ0pF
ꢀ70pF
330pF
390pF
470pF
260pF
680pF
8ꢀ0pF
1000pF
1ꢀ00pF
1200pF
0.2pF
CK
0.02pF GRM1884C2AR50WA01#
0.1pF GRM1884C2AR50BA01#
0.02pF GRM1884C2AR60WA01#
0.1pF GRM1884C2AR60BA01#
0.02pF GRM1884C2AR70WA01#
0.1pF GRM1884C2AR70BA01#
0.02pF GRM1884C2AR80WA01#
0.1pF GRM1884C2AR80BA01#
0.02pF GRM1884C2AR90WA01#
0.1pF GRM1884C2AR90BA01#
0.02pF GRM1884C2A1R0WA01#
0.1pF GRM1884C2A1R0BA01#
0.ꢀ2pF GRM1884C2A1R0CA01#
0.02pF GRM1884C2A1R1WA01#
0.1pF GRM1884C2A1R1BA01#
0.ꢀ2pF GRM1884C2A1R1CA01#
0.02pF GRM1884C2A1R2WA01#
0.1pF GRM1884C2A1R2BA01#
0.ꢀ2pF GRM1884C2A1R2CA01#
0.02pF GRM1884C2A1R3WA01#
0.1pF GRM1884C2A1R3BA01#
0.ꢀ2pF GRM1884C2A1R3CA01#
0.02pF GRM1884C2A1R4WA01#
0.1pF GRM1884C2A1R4BA01#
0.ꢀ2pF GRM1884C2A1R4CA01#
0.02pF GRM1884C2A1R5WA01#
0.1pF GRM1884C2A1R5BA01#
0.ꢀ2pF GRM1884C2A1R5CA01#
0.02pF GRM1884C2A1R6WA01#
0.1pF GRM1884C2A1R6BA01#
0.ꢀ2pF GRM1884C2A1R6CA01#
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.ꢀpF
1.3pF
1.4pF
1.2pF
1.6pF
10pF
1ꢀpF
12pF
18pF
25
25
25
25
GRM1885C2A100JA01#
GRM1885C2A120JA01#
GRM1885C2A150JA01#
GRM1885C2A180JA01#
Part number # indicates the package specification code.
21
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.1,ꢁ01ꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc CK
1.7pF
0.0ꢀpF GRM1884C2A1R7WA01#
0.1pF GRM1884C2A1R7BA01#
0.ꢁꢀpF GRM1884C2A1R7CA01#
0.0ꢀpF GRM1884C2A1R8WA01#
0.1pF GRM1884C2A1R8BA01#
0.ꢁꢀpF GRM1884C2A1R8CA01#
0.0ꢀpF GRM1884C2A1R9WA01#
0.1pF GRM1884C2A1R9BA01#
0.ꢁꢀpF GRM1884C2A1R9CA01#
0.0ꢀpF GRM1884C2A2R0WA01#
0.1pF GRM1884C2A2R0BA01#
0.ꢁꢀpF GRM1884C2A2R0CA01#
0.0ꢀpF GRM1883C2A2R1WA01#
0.1pF GRM1883C2A2R1BA01#
0.ꢁꢀpF GRM1883C2A2R1CA01#
0.0ꢀpF GRM1883C2A2R2WA01#
0.1pF GRM1883C2A2R2BA01#
0.ꢁꢀpF GRM1883C2A2R2CA01#
0.0ꢀpF GRM1883C2A2R3WA01#
0.1pF GRM1883C2A2R3BA01#
0.ꢁꢀpF GRM1883C2A2R3CA01#
0.0ꢀpF GRM1883C2A2R4WA01#
0.1pF GRM1883C2A2R4BA01#
0.ꢁꢀpF GRM1883C2A2R4CA01#
0.0ꢀpF GRM1883C2A2R5WA01#
0.1pF GRM1883C2A2R5BA01#
0.ꢁꢀpF GRM1883C2A2R5CA01#
0.0ꢀpF GRM1883C2A2R6WA01#
0.1pF GRM1883C2A2R6BA01#
0.ꢁꢀpF GRM1883C2A2R6CA01#
0.0ꢀpF GRM1883C2A2R7WA01#
0.1pF GRM1883C2A2R7BA01#
0.ꢁꢀpF GRM1883C2A2R7CA01#
0.0ꢀpF GRM1883C2A2R8WA01#
0.1pF GRM1883C2A2R8BA01#
0.ꢁꢀpF GRM1883C2A2R8CA01#
0.0ꢀpF GRM1883C2A2R9WA01#
0.1pF GRM1883C2A2R9BA01#
0.ꢁꢀpF GRM1883C2A2R9CA01#
0.0ꢀpF GRM1883C2A3R0WA01#
0.1pF GRM1883C2A3R0BA01#
0.ꢁꢀpF GRM1883C2A3R0CA01#
0.0ꢀpF GRM1883C2A3R1WA01#
0.1pF GRM1883C2A3R1BA01#
0.ꢁꢀpF GRM1883C2A3R1CA01#
0.0ꢀpF GRM1883C2A3R2WA01#
0.1pF GRM1883C2A3R2BA01#
0.ꢁꢀpF GRM1883C2A3R2CA01#
0.0ꢀpF GRM1883C2A3R3WA01#
0.1pF GRM1883C2A3R3BA01#
0.ꢁꢀpF GRM1883C2A3R3CA01#
0.0ꢀpF GRM1883C2A3R4WA01#
0.1pF GRM1883C2A3R4BA01#
0.ꢁꢀpF GRM1883C2A3R4CA01#
0.9mm 100Vdc CJ
3.ꢀpF
0.0ꢀpF GRM1883C2A3R5WA01#
0.1pF GRM1883C2A3R5BA01#
0.ꢁꢀpF GRM1883C2A3R5CA01#
0.0ꢀpF GRM1883C2A3R6WA01#
0.1pF GRM1883C2A3R6BA01#
0.ꢁꢀpF GRM1883C2A3R6CA01#
0.0ꢀpF GRM1883C2A3R7WA01#
0.1pF GRM1883C2A3R7BA01#
0.ꢁꢀpF GRM1883C2A3R7CA01#
0.0ꢀpF GRM1883C2A3R8WA01#
0.1pF GRM1883C2A3R8BA01#
0.ꢁꢀpF GRM1883C2A3R8CA01#
0.0ꢀpF GRM1883C2A3R9WA01#
0.1pF GRM1883C2A3R9BA01#
0.ꢁꢀpF GRM1883C2A3R9CA01#
0.0ꢀpF GRM1882C2A4R0WA01#
0.1pF GRM1882C2A4R0BA01#
0.ꢁꢀpF GRM1882C2A4R0CA01#
0.0ꢀpF GRM1882C2A4R1WA01#
0.1pF GRM1882C2A4R1BA01#
0.ꢁꢀpF GRM1882C2A4R1CA01#
0.0ꢀpF GRM1882C2A4R2WA01#
0.1pF GRM1882C2A4R2BA01#
0.ꢁꢀpF GRM1882C2A4R2CA01#
0.0ꢀpF GRM1882C2A4R3WA01#
0.1pF GRM1882C2A4R3BA01#
0.ꢁꢀpF GRM1882C2A4R3CA01#
0.0ꢀpF GRM1882C2A4R4WA01#
0.1pF GRM1882C2A4R4BA01#
0.ꢁꢀpF GRM1882C2A4R4CA01#
0.0ꢀpF GRM1882C2A4R5WA01#
0.1pF GRM1882C2A4R5BA01#
0.ꢁꢀpF GRM1882C2A4R5CA01#
0.0ꢀpF GRM1882C2A4R6WA01#
0.1pF GRM1882C2A4R6BA01#
0.ꢁꢀpF GRM1882C2A4R6CA01#
0.0ꢀpF GRM1882C2A4R7WA01#
0.1pF GRM1882C2A4R7BA01#
0.ꢁꢀpF GRM1882C2A4R7CA01#
0.0ꢀpF GRM1882C2A4R8WA01#
0.1pF GRM1882C2A4R8BA01#
0.ꢁꢀpF GRM1882C2A4R8CA01#
0.0ꢀpF GRM1882C2A4R9WA01#
0.1pF GRM1882C2A4R9BA01#
0.ꢁꢀpF GRM1882C2A4R9CA01#
0.0ꢀpF GRM1882C2A5R0WA01#
0.1pF GRM1882C2A5R0BA01#
0.ꢁꢀpF GRM1882C2A5R0CA01#
0.0ꢀpF GRM1882C2A5R1WA01#
0.1pF GRM1882C2A5R1BA01#
0.ꢁꢀpF GRM1882C2A5R1CA01#
0.ꢀpF GRM1882C2A5R1DA01#
0.0ꢀpF GRM1882C2A5R2WA01#
0.1pF GRM1882C2A5R2BA01#
1.8pF
1.9pF
ꢁ.0pF
ꢁ.1pF
ꢁ.ꢁpF
ꢁ.3pF
ꢁ.4pF
ꢁ.ꢀpF
ꢁ.6pF
ꢁ.7pF
ꢁ.8pF
ꢁ.9pF
3.0pF
3.1pF
3.ꢁpF
3.3pF
3.4pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.ꢁpF
4.3pF
4.4pF
4.ꢀpF
4.6pF
4.7pF
4.8pF
4.9pF
ꢀ.0pF
ꢀ.1pF
CJ
CH
ꢀ.ꢁpF
Part number # indicates the package specification code.
ꢀꢁ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc CH
5.2pF
0.25pF GRM1882C2A5R2CA01#
0.5pF GRM1882C2A5R2DA01#
0.05pF GRM1882C2A5R3WA01#
0.1pF GRM1882C2A5R3BA01#
0.25pF GRM1882C2A5R3CA01#
0.5pF GRM1882C2A5R3DA01#
0.05pF GRM1882C2A5R4WA01#
0.1pF GRM1882C2A5R4BA01#
0.25pF GRM1882C2A5R4CA01#
0.5pF GRM1882C2A5R4DA01#
0.05pF GRM1882C2A5R5WA01#
0.1pF GRM1882C2A5R5BA01#
0.25pF GRM1882C2A5R5CA01#
0.5pF GRM1882C2A5R5DA01#
0.05pF GRM1882C2A5R6WA01#
0.1pF GRM1882C2A5R6BA01#
0.25pF GRM1882C2A5R6CA01#
0.5pF GRM1882C2A5R6DA01#
0.05pF GRM1882C2A5R7WA01#
0.1pF GRM1882C2A5R7BA01#
0.25pF GRM1882C2A5R7CA01#
0.5pF GRM1882C2A5R7DA01#
0.05pF GRM1882C2A5R8WA01#
0.1pF GRM1882C2A5R8BA01#
0.25pF GRM1882C2A5R8CA01#
0.5pF GRM1882C2A5R8DA01#
0.05pF GRM1882C2A5R9WA01#
0.1pF GRM1882C2A5R9BA01#
0.25pF GRM1882C2A5R9CA01#
0.5pF GRM1882C2A5R9DA01#
0.05pF GRM1882C2A6R0WA01#
0.1pF GRM1882C2A6R0BA01#
0.25pF GRM1882C2A6R0CA01#
0.5pF GRM1882C2A6R0DA01#
0.05pF GRM1882C2A6R1WA01#
0.1pF GRM1882C2A6R1BA01#
0.25pF GRM1882C2A6R1CA01#
0.5pF GRM1882C2A6R1DA01#
0.05pF GRM1882C2A6R2WA01#
0.1pF GRM1882C2A6R2BA01#
0.25pF GRM1882C2A6R2CA01#
0.5pF GRM1882C2A6R2DA01#
0.05pF GRM1882C2A6R3WA01#
0.1pF GRM1882C2A6R3BA01#
0.25pF GRM1882C2A6R3CA01#
0.5pF GRM1882C2A6R3DA01#
0.05pF GRM1882C2A6R4WA01#
0.1pF GRM1882C2A6R4BA01#
0.25pF GRM1882C2A6R4CA01#
0.5pF GRM1882C2A6R4DA01#
0.05pF GRM1882C2A6R5WA01#
0.1pF GRM1882C2A6R5BA01#
0.25pF GRM1882C2A6R5CA01#
0.5pF GRM1882C2A6R5DA01#
0.9mm 100Vdc CH
6.6pF
0.05pF GRM1882C2A6R6WA01#
0.1pF GRM1882C2A6R6BA01#
0.25pF GRM1882C2A6R6CA01#
0.5pF GRM1882C2A6R6DA01#
0.05pF GRM1882C2A6R7WA01#
0.1pF GRM1882C2A6R7BA01#
0.25pF GRM1882C2A6R7CA01#
0.5pF GRM1882C2A6R7DA01#
0.05pF GRM1882C2A6R8WA01#
0.1pF GRM1882C2A6R8BA01#
0.25pF GRM1882C2A6R8CA01#
0.5pF GRM1882C2A6R8DA01#
0.05pF GRM1882C2A6R9WA01#
0.1pF GRM1882C2A6R9BA01#
0.25pF GRM1882C2A6R9CA01#
0.5pF GRM1882C2A6R9DA01#
0.05pF GRM1882C2A7R0WA01#
0.1pF GRM1882C2A7R0BA01#
0.25pF GRM1882C2A7R0CA01#
0.5pF GRM1882C2A7R0DA01#
0.05pF GRM1882C2A7R1WA01#
0.1pF GRM1882C2A7R1BA01#
0.25pF GRM1882C2A7R1CA01#
0.5pF GRM1882C2A7R1DA01#
0.05pF GRM1882C2A7R2WA01#
0.1pF GRM1882C2A7R2BA01#
0.25pF GRM1882C2A7R2CA01#
0.5pF GRM1882C2A7R2DA01#
0.05pF GRM1882C2A7R3WA01#
0.1pF GRM1882C2A7R3BA01#
0.25pF GRM1882C2A7R3CA01#
0.5pF GRM1882C2A7R3DA01#
0.05pF GRM1882C2A7R4WA01#
0.1pF GRM1882C2A7R4BA01#
0.25pF GRM1882C2A7R4CA01#
0.5pF GRM1882C2A7R4DA01#
0.05pF GRM1882C2A7R5WA01#
0.1pF GRM1882C2A7R5BA01#
0.25pF GRM1882C2A7R5CA01#
0.5pF GRM1882C2A7R5DA01#
0.05pF GRM1882C2A7R6WA01#
0.1pF GRM1882C2A7R6BA01#
0.25pF GRM1882C2A7R6CA01#
0.5pF GRM1882C2A7R6DA01#
0.05pF GRM1882C2A7R7WA01#
0.1pF GRM1882C2A7R7BA01#
0.25pF GRM1882C2A7R7CA01#
0.5pF GRM1882C2A7R7DA01#
0.05pF GRM1882C2A7R8WA01#
0.1pF GRM1882C2A7R8BA01#
0.25pF GRM1882C2A7R8CA01#
0.5pF GRM1882C2A7R8DA01#
0.05pF GRM1882C2A7R9WA01#
0.1pF GRM1882C2A7R9BA01#
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.1pF
6.2pF
6.3pF
6.4pF
6.5pF
6.7pF
6.8pF
6.9pF
7.0pF
7.1pF
7.2pF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
Part number # indicates the package specification code.
53
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc CH
7.9pF
0.ꢀ2pF GRM1882C2A7R9CA01#
0.2pF GRM1882C2A7R9DA01#
0.02pF GRM1882C2A8R0WA01#
0.1pF GRM1882C2A8R0BA01#
0.ꢀ2pF GRM1882C2A8R0CA01#
0.2pF GRM1882C2A8R0DA01#
0.02pF GRM1882C2A8R1WA01#
0.1pF GRM1882C2A8R1BA01#
0.ꢀ2pF GRM1882C2A8R1CA01#
0.2pF GRM1882C2A8R1DA01#
0.02pF GRM1882C2A8R2WA01#
0.1pF GRM1882C2A8R2BA01#
0.ꢀ2pF GRM1882C2A8R2CA01#
0.2pF GRM1882C2A8R2DA01#
0.02pF GRM1882C2A8R3WA01#
0.1pF GRM1882C2A8R3BA01#
0.ꢀ2pF GRM1882C2A8R3CA01#
0.2pF GRM1882C2A8R3DA01#
0.02pF GRM1882C2A8R4WA01#
0.1pF GRM1882C2A8R4BA01#
0.ꢀ2pF GRM1882C2A8R4CA01#
0.2pF GRM1882C2A8R4DA01#
0.02pF GRM1882C2A8R5WA01#
0.1pF GRM1882C2A8R5BA01#
0.ꢀ2pF GRM1882C2A8R5CA01#
0.2pF GRM1882C2A8R5DA01#
0.02pF GRM1882C2A8R6WA01#
0.1pF GRM1882C2A8R6BA01#
0.ꢀ2pF GRM1882C2A8R6CA01#
0.2pF GRM1882C2A8R6DA01#
0.02pF GRM1882C2A8R7WA01#
0.1pF GRM1882C2A8R7BA01#
0.ꢀ2pF GRM1882C2A8R7CA01#
0.2pF GRM1882C2A8R7DA01#
0.02pF GRM1882C2A8R8WA01#
0.1pF GRM1882C2A8R8BA01#
0.ꢀ2pF GRM1882C2A8R8CA01#
0.2pF GRM1882C2A8R8DA01#
0.02pF GRM1882C2A8R9WA01#
0.1pF GRM1882C2A8R9BA01#
0.ꢀ2pF GRM1882C2A8R9CA01#
0.2pF GRM1882C2A8R9DA01#
0.02pF GRM1882C2A9R0WA01#
0.1pF GRM1882C2A9R0BA01#
0.ꢀ2pF GRM1882C2A9R0CA01#
0.2pF GRM1882C2A9R0DA01#
0.02pF GRM1882C2A9R1WA01#
0.1pF GRM1882C2A9R1BA01#
0.ꢀ2pF GRM1882C2A9R1CA01#
0.2pF GRM1882C2A9R1DA01#
0.02pF GRM1882C2A9R2WA01#
0.1pF GRM1882C2A9R2BA01#
0.ꢀ2pF GRM1882C2A9R2CA01#
0.2pF GRM1882C2A9R2DA01#
0.9mm 100Vdc CH
9.3pF
0.02pF GRM1882C2A9R3WA01#
0.1pF GRM1882C2A9R3BA01#
0.ꢀ2pF GRM1882C2A9R3CA01#
0.2pF GRM1882C2A9R3DA01#
0.02pF GRM1882C2A9R4WA01#
0.1pF GRM1882C2A9R4BA01#
0.ꢀ2pF GRM1882C2A9R4CA01#
0.2pF GRM1882C2A9R4DA01#
0.02pF GRM1882C2A9R5WA01#
0.1pF GRM1882C2A9R5BA01#
0.ꢀ2pF GRM1882C2A9R5CA01#
0.2pF GRM1882C2A9R5DA01#
0.02pF GRM1882C2A9R6WA01#
0.1pF GRM1882C2A9R6BA01#
0.ꢀ2pF GRM1882C2A9R6CA01#
0.2pF GRM1882C2A9R6DA01#
0.02pF GRM1882C2A9R7WA01#
0.1pF GRM1882C2A9R7BA01#
0.ꢀ2pF GRM1882C2A9R7CA01#
0.2pF GRM1882C2A9R7DA01#
0.02pF GRM1882C2A9R8WA01#
0.1pF GRM1882C2A9R8BA01#
0.ꢀ2pF GRM1882C2A9R8CA01#
0.2pF GRM1882C2A9R8DA01#
0.02pF GRM1882C2A9R9WA01#
0.1pF GRM1882C2A9R9BA01#
0.ꢀ2pF GRM1882C2A9R9CA01#
0.2pF GRM1882C2A9R9DA01#
8.0pF
8.1pF
8.ꢀpF
8.3pF
8.4pF
8.2pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.1pF
9.ꢀpF
9.4pF
9.2pF
9.6pF
9.7pF
9.8pF
9.9pF
10pF
1ꢀpF
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
GRM1882C2A100JA01#
GRM1882C2A120JA01#
GRM1882C2A150JA01#
GRM1882C2A180JA01#
GRM1882C2A220JA01#
GRM1882C2A270JA01#
GRM1882C2A330JA01#
GRM1882C2A390JA01#
GRM1882C2A470JA01#
GRM1882C2A560JA01#
GRM1882C2A680JA01#
GRM1882C2A820JA01#
GRM1882C2A101JA01#
GRM1882C2A121JA01#
GRM1882C2A151JA01#
GRM1882C2A181JA01#
GRM1882C2A221JA01#
GRM1882C2A271JA01#
GRM1882C2A331JA01#
GRM1882C2A391JA01#
GRM1882C2A471JA01#
GRM1882C2A561JA01#
GRM1882C2A681JA01#
GRM1882C2A821JA01#
GRM1882C2A102JA01#
GRM1882C2A122JA01#
12pF
18pF
ꢀꢀpF
ꢀ7pF
33pF
39pF
47pF
26pF
68pF
8ꢀpF
100pF
1ꢀ0pF
120pF
180pF
ꢀꢀ0pF
ꢀ70pF
330pF
390pF
470pF
260pF
680pF
8ꢀ0pF
1000pF
1ꢀ00pF
Part number # indicates the package specification code.
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.1,ꢁ01ꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc CH 1500pF
50Vdc C0G 0.5pF
5ꢀ
GRM1882C2A152JA01#
0.9mm 50Vdc C0G ꢁ.4pF
ꢁ.5pF
0.1pF GRM1885C1H2R4BA01#
0.ꢁ5pF GRM1885C1H2R4CA01#
0.05pF GRM1885C1H2R5WA01#
0.1pF GRM1885C1H2R5BA01#
0.ꢁ5pF GRM1885C1H2R5CA01#
0.05pF GRM1885C1H2R6WA01#
0.1pF GRM1885C1H2R6BA01#
0.ꢁ5pF GRM1885C1H2R6CA01#
0.05pF GRM1885C1H2R7WA01#
0.1pF GRM1885C1H2R7BA01#
0.ꢁ5pF GRM1885C1H2R7CA01#
0.05pF GRM1885C1H2R8WA01#
0.1pF GRM1885C1H2R8BA01#
0.ꢁ5pF GRM1885C1H2R8CA01#
0.05pF GRM1885C1H2R9WA01#
0.1pF GRM1885C1H2R9BA01#
0.ꢁ5pF GRM1885C1H2R9CA01#
0.05pF GRM1885C1H3R0WA01#
0.1pF GRM1885C1H3R0BA01#
0.ꢁ5pF GRM1885C1H3R0CA01#
0.05pF GRM1885C1H3R1WA01#
0.1pF GRM1885C1H3R1BA01#
0.ꢁ5pF GRM1885C1H3R1CA01#
0.05pF GRM1885C1H3R2WA01#
0.1pF GRM1885C1H3R2BA01#
0.ꢁ5pF GRM1885C1H3R2CA01#
0.05pF GRM1885C1H3R3WA01#
0.1pF GRM1885C1H3R3BA01#
0.ꢁ5pF GRM1885C1H3R3CA01#
0.05pF GRM1885C1H3R4WA01#
0.1pF GRM1885C1H3R4BA01#
0.ꢁ5pF GRM1885C1H3R4CA01#
0.05pF GRM1885C1H3R5WA01#
0.1pF GRM1885C1H3R5BA01#
0.ꢁ5pF GRM1885C1H3R5CA01#
0.05pF GRM1885C1H3R6WA01#
0.1pF GRM1885C1H3R6BA01#
0.ꢁ5pF GRM1885C1H3R6CA01#
0.05pF GRM1885C1H3R7WA01#
0.1pF GRM1885C1H3R7BA01#
0.ꢁ5pF GRM1885C1H3R7CA01#
0.05pF GRM1885C1H3R8WA01#
0.1pF GRM1885C1H3R8BA01#
0.ꢁ5pF GRM1885C1H3R8CA01#
0.05pF GRM1885C1H3R9WA01#
0.1pF GRM1885C1H3R9BA01#
0.ꢁ5pF GRM1885C1H3R9CA01#
0.05pF GRM1885C1H4R0WA01#
0.1pF GRM1885C1H4R0BA01#
0.ꢁ5pF GRM1885C1H4R0CA01#
0.05pF GRM1885C1H4R1WA01#
0.1pF GRM1885C1H4R1BA01#
0.ꢁ5pF GRM1885C1H4R1CA01#
0.05pF GRM1885C1H4R2WA01#
0.05pF GRM1885C1HR50WA01#
0.1pF GRM1885C1HR50BA01#
0.05pF GRM1885C1HR60WA01#
0.1pF GRM1885C1HR60BA01#
0.05pF GRM1885C1HR70WA01#
0.1pF GRM1885C1HR70BA01#
0.05pF GRM1885C1HR80WA01#
0.1pF GRM1885C1HR80BA01#
0.05pF GRM1885C1HR90WA01#
0.1pF GRM1885C1HR90BA01#
0.05pF GRM1885C1H1R0WA01#
0.1pF GRM1885C1H1R0BA01#
0.ꢁ5pF GRM1885C1H1R0CA01#
0.05pF GRM1885C1H1R1WA01#
0.1pF GRM1885C1H1R1BA01#
0.ꢁ5pF GRM1885C1H1R1CA01#
0.05pF GRM1885C1H1R2WA01#
0.1pF GRM1885C1H1R2BA01#
0.ꢁ5pF GRM1885C1H1R2CA01#
0.05pF GRM1885C1H1R3WA01#
0.1pF GRM1885C1H1R3BA01#
0.ꢁ5pF GRM1885C1H1R3CA01#
0.05pF GRM1885C1H1R4WA01#
0.1pF GRM1885C1H1R4BA01#
0.ꢁ5pF GRM1885C1H1R4CA01#
0.05pF GRM1885C1H1R5WA01#
0.1pF GRM1885C1H1R5BA01#
0.ꢁ5pF GRM1885C1H1R5CA01#
0.05pF GRM1885C1H1R6WA01#
0.1pF GRM1885C1H1R6BA01#
0.ꢁ5pF GRM1885C1H1R6CA01#
0.05pF GRM1885C1H1R7WA01#
0.1pF GRM1885C1H1R7BA01#
0.ꢁ5pF GRM1885C1H1R7CA01#
0.05pF GRM1885C1H1R8WA01#
0.1pF GRM1885C1H1R8BA01#
0.ꢁ5pF GRM1885C1H1R8CA01#
0.05pF GRM1885C1H1R9WA01#
0.1pF GRM1885C1H1R9BA01#
0.ꢁ5pF GRM1885C1H1R9CA01#
0.05pF GRM1885C1H2R0WA01#
0.1pF GRM1885C1H2R0BA01#
0.ꢁ5pF GRM1885C1H2R0CA01#
0.05pF GRM1885C1H2R1WA01#
0.1pF GRM1885C1H2R1BA01#
0.ꢁ5pF GRM1885C1H2R1CA01#
0.05pF GRM1885C1H2R2WA01#
0.1pF GRM1885C1H2R2BA01#
0.ꢁ5pF GRM1885C1H2R2CA01#
0.05pF GRM1885C1H2R3WA01#
0.1pF GRM1885C1H2R3BA01#
0.ꢁ5pF GRM1885C1H2R3CA01#
0.05pF GRM1885C1H2R4WA01#
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
ꢁ.6pF
ꢁ.7pF
ꢁ.8pF
ꢁ.9pF
3.0pF
3.1pF
3.ꢁpF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.ꢁpF
1.1pF
1.ꢁpF
1.3pF
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
ꢁ.0pF
ꢁ.1pF
ꢁ.ꢁpF
ꢁ.3pF
ꢁ.4pF
Part number # indicates the package specification code.
55
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc C0G 4.2pF
4.3pF
0.ꢀpF GRM1885C1H4R2BA01#
0.25pF GRM1885C1H4R2CA01#
0.05pF GRM1885C1H4R3WA01#
0.ꢀpF GRM1885C1H4R3BA01#
0.25pF GRM1885C1H4R3CA01#
0.05pF GRM1885C1H4R4WA01#
0.ꢀpF GRM1885C1H4R4BA01#
0.25pF GRM1885C1H4R4CA01#
0.05pF GRM1885C1H4R5WA01#
0.ꢀpF GRM1885C1H4R5BA01#
0.25pF GRM1885C1H4R5CA01#
0.05pF GRM1885C1H4R6WA01#
0.ꢀpF GRM1885C1H4R6BA01#
0.25pF GRM1885C1H4R6CA01#
0.05pF GRM1885C1H4R7WA01#
0.ꢀpF GRM1885C1H4R7BA01#
0.25pF GRM1885C1H4R7CA01#
0.05pF GRM1885C1H4R8WA01#
0.ꢀpF GRM1885C1H4R8BA01#
0.25pF GRM1885C1H4R8CA01#
0.05pF GRM1885C1H4R9WA01#
0.ꢀpF GRM1885C1H4R9BA01#
0.25pF GRM1885C1H4R9CA01#
0.05pF GRM1885C1H5R0WA01#
0.ꢀpF GRM1885C1H5R0BA01#
0.25pF GRM1885C1H5R0CA01#
0.05pF GRM1885C1H5R1WA01#
0.ꢀpF GRM1885C1H5R1BA01#
0.25pF GRM1885C1H5R1CA01#
0.5pF GRM1885C1H5R1DA01#
0.05pF GRM1885C1H5R2WA01#
0.ꢀpF GRM1885C1H5R2BA01#
0.25pF GRM1885C1H5R2CA01#
0.5pF GRM1885C1H5R2DA01#
0.05pF GRM1885C1H5R3WA01#
0.ꢀpF GRM1885C1H5R3BA01#
0.25pF GRM1885C1H5R3CA01#
0.5pF GRM1885C1H5R3DA01#
0.05pF GRM1885C1H5R4WA01#
0.ꢀpF GRM1885C1H5R4BA01#
0.25pF GRM1885C1H5R4CA01#
0.5pF GRM1885C1H5R4DA01#
0.05pF GRM1885C1H5R5WA01#
0.ꢀpF GRM1885C1H5R5BA01#
0.25pF GRM1885C1H5R5CA01#
0.5pF GRM1885C1H5R5DA01#
0.05pF GRM1885C1H5R6WA01#
0.ꢀpF GRM1885C1H5R6BA01#
0.25pF GRM1885C1H5R6CA01#
0.5pF GRM1885C1H5R6DA01#
0.05pF GRM1885C1H5R7WA01#
0.ꢀpF GRM1885C1H5R7BA01#
0.25pF GRM1885C1H5R7CA01#
0.5pF GRM1885C1H5R7DA01#
0.9mm 50Vdc C0G 5.8pF
0.05pF GRM1885C1H5R8WA01#
0.ꢀpF GRM1885C1H5R8BA01#
0.25pF GRM1885C1H5R8CA01#
0.5pF GRM1885C1H5R8DA01#
0.05pF GRM1885C1H5R9WA01#
0.ꢀpF GRM1885C1H5R9BA01#
0.25pF GRM1885C1H5R9CA01#
0.5pF GRM1885C1H5R9DA01#
0.05pF GRM1885C1H6R0WA01#
0.ꢀpF GRM1885C1H6R0BA01#
0.25pF GRM1885C1H6R0CA01#
0.5pF GRM1885C1H6R0DA01#
0.05pF GRM1885C1H6R1WA01#
0.ꢀpF GRM1885C1H6R1BA01#
0.25pF GRM1885C1H6R1CA01#
0.5pF GRM1885C1H6R1DA01#
0.05pF GRM1885C1H6R2WA01#
0.ꢀpF GRM1885C1H6R2BA01#
0.25pF GRM1885C1H6R2CA01#
0.5pF GRM1885C1H6R2DA01#
0.05pF GRM1885C1H6R3WA01#
0.ꢀpF GRM1885C1H6R3BA01#
0.25pF GRM1885C1H6R3CA01#
0.5pF GRM1885C1H6R3DA01#
0.05pF GRM1885C1H6R4WA01#
0.ꢀpF GRM1885C1H6R4BA01#
0.25pF GRM1885C1H6R4CA01#
0.5pF GRM1885C1H6R4DA01#
0.05pF GRM1885C1H6R5WA01#
0.ꢀpF GRM1885C1H6R5BA01#
0.25pF GRM1885C1H6R5CA01#
0.5pF GRM1885C1H6R5DA01#
0.05pF GRM1885C1H6R6WA01#
0.ꢀpF GRM1885C1H6R6BA01#
0.25pF GRM1885C1H6R6CA01#
0.5pF GRM1885C1H6R6DA01#
0.05pF GRM1885C1H6R7WA01#
0.ꢀpF GRM1885C1H6R7BA01#
0.25pF GRM1885C1H6R7CA01#
0.5pF GRM1885C1H6R7DA01#
0.05pF GRM1885C1H6R8WA01#
0.ꢀpF GRM1885C1H6R8BA01#
0.25pF GRM1885C1H6R8CA01#
0.5pF GRM1885C1H6R8DA01#
0.05pF GRM1885C1H6R9WA01#
0.ꢀpF GRM1885C1H6R9BA01#
0.25pF GRM1885C1H6R9CA01#
0.5pF GRM1885C1H6R9DA01#
0.05pF GRM1885C1H7R0WA01#
0.ꢀpF GRM1885C1H7R0BA01#
0.25pF GRM1885C1H7R0CA01#
0.5pF GRM1885C1H7R0DA01#
0.05pF GRM1885C1H7R1WA01#
0.ꢀpF GRM1885C1H7R1BA01#
5.9pF
6.0pF
6.ꢀpF
6.2pF
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.ꢀpF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
5.ꢀpF
5.2pF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
Part number # indicates the package specification code.
56
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc C0G 7.1pF
7.ꢀpF
0.ꢀ5pF GRM1885C1H7R1CA01#
0.5pF GRM1885C1H7R1DA01#
0.05pF GRM1885C1H7R2WA01#
0.1pF GRM1885C1H7R2BA01#
0.ꢀ5pF GRM1885C1H7R2CA01#
0.5pF GRM1885C1H7R2DA01#
0.05pF GRM1885C1H7R3WA01#
0.1pF GRM1885C1H7R3BA01#
0.ꢀ5pF GRM1885C1H7R3CA01#
0.5pF GRM1885C1H7R3DA01#
0.05pF GRM1885C1H7R4WA01#
0.1pF GRM1885C1H7R4BA01#
0.ꢀ5pF GRM1885C1H7R4CA01#
0.5pF GRM1885C1H7R4DA01#
0.05pF GRM1885C1H7R5WA01#
0.1pF GRM1885C1H7R5BA01#
0.ꢀ5pF GRM1885C1H7R5CA01#
0.5pF GRM1885C1H7R5DA01#
0.05pF GRM1885C1H7R6WA01#
0.1pF GRM1885C1H7R6BA01#
0.ꢀ5pF GRM1885C1H7R6CA01#
0.5pF GRM1885C1H7R6DA01#
0.05pF GRM1885C1H7R7WA01#
0.1pF GRM1885C1H7R7BA01#
0.ꢀ5pF GRM1885C1H7R7CA01#
0.5pF GRM1885C1H7R7DA01#
0.05pF GRM1885C1H7R8WA01#
0.1pF GRM1885C1H7R8BA01#
0.ꢀ5pF GRM1885C1H7R8CA01#
0.5pF GRM1885C1H7R8DA01#
0.05pF GRM1885C1H7R9WA01#
0.1pF GRM1885C1H7R9BA01#
0.ꢀ5pF GRM1885C1H7R9CA01#
0.5pF GRM1885C1H7R9DA01#
0.05pF GRM1885C1H8R0WA01#
0.1pF GRM1885C1H8R0BA01#
0.ꢀ5pF GRM1885C1H8R0CA01#
0.5pF GRM1885C1H8R0DA01#
0.05pF GRM1885C1H8R1WA01#
0.1pF GRM1885C1H8R1BA01#
0.ꢀ5pF GRM1885C1H8R1CA01#
0.5pF GRM1885C1H8R1DA01#
0.05pF GRM1885C1H8R2WA01#
0.1pF GRM1885C1H8R2BA01#
0.ꢀ5pF GRM1885C1H8R2CA01#
0.5pF GRM1885C1H8R2DA01#
0.05pF GRM1885C1H8R3WA01#
0.1pF GRM1885C1H8R3BA01#
0.ꢀ5pF GRM1885C1H8R3CA01#
0.5pF GRM1885C1H8R3DA01#
0.05pF GRM1885C1H8R4WA01#
0.1pF GRM1885C1H8R4BA01#
0.ꢀ5pF GRM1885C1H8R4CA01#
0.5pF GRM1885C1H8R4DA01#
0.9mm 50Vdc C0G 8.5pF
0.05pF GRM1885C1H8R5WA01#
0.1pF GRM1885C1H8R5BA01#
0.ꢀ5pF GRM1885C1H8R5CA01#
0.5pF GRM1885C1H8R5DA01#
0.05pF GRM1885C1H8R6WA01#
0.1pF GRM1885C1H8R6BA01#
0.ꢀ5pF GRM1885C1H8R6CA01#
0.5pF GRM1885C1H8R6DA01#
0.05pF GRM1885C1H8R7WA01#
0.1pF GRM1885C1H8R7BA01#
0.ꢀ5pF GRM1885C1H8R7CA01#
0.5pF GRM1885C1H8R7DA01#
0.05pF GRM1885C1H8R8WA01#
0.1pF GRM1885C1H8R8BA01#
0.ꢀ5pF GRM1885C1H8R8CA01#
0.5pF GRM1885C1H8R8DA01#
0.05pF GRM1885C1H8R9WA01#
0.1pF GRM1885C1H8R9BA01#
0.ꢀ5pF GRM1885C1H8R9CA01#
0.5pF GRM1885C1H8R9DA01#
0.05pF GRM1885C1H9R0WA01#
0.1pF GRM1885C1H9R0BA01#
0.ꢀ5pF GRM1885C1H9R0CA01#
0.5pF GRM1885C1H9R0DA01#
0.05pF GRM1885C1H9R1WA01#
0.1pF GRM1885C1H9R1BA01#
0.ꢀ5pF GRM1885C1H9R1CA01#
0.5pF GRM1885C1H9R1DA01#
0.05pF GRM1885C1H9R2WA01#
0.1pF GRM1885C1H9R2BA01#
0.ꢀ5pF GRM1885C1H9R2CA01#
0.5pF GRM1885C1H9R2DA01#
0.05pF GRM1885C1H9R3WA01#
0.1pF GRM1885C1H9R3BA01#
0.ꢀ5pF GRM1885C1H9R3CA01#
0.5pF GRM1885C1H9R3DA01#
0.05pF GRM1885C1H9R4WA01#
0.1pF GRM1885C1H9R4BA01#
0.ꢀ5pF GRM1885C1H9R4CA01#
0.5pF GRM1885C1H9R4DA01#
0.05pF GRM1885C1H9R5WA01#
0.1pF GRM1885C1H9R5BA01#
0.ꢀ5pF GRM1885C1H9R5CA01#
0.5pF GRM1885C1H9R5DA01#
0.05pF GRM1885C1H9R6WA01#
0.1pF GRM1885C1H9R6BA01#
0.ꢀ5pF GRM1885C1H9R6CA01#
0.5pF GRM1885C1H9R6DA01#
0.05pF GRM1885C1H9R7WA01#
0.1pF GRM1885C1H9R7BA01#
0.ꢀ5pF GRM1885C1H9R7CA01#
0.5pF GRM1885C1H9R7DA01#
0.05pF GRM1885C1H9R8WA01#
0.1pF GRM1885C1H9R8BA01#
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.1pF
9.ꢀpF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.1pF
8.ꢀpF
8.3pF
8.4pF
Part number # indicates the package specification code.
57
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.ꢁ,ꢀ0ꢁꢀ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc C0G 9.8pF
9.9pF
0.ꢀ5pF GRM1885C1H9R8CA01#
0.5pF GRM1885C1H9R8DA01#
0.05pF GRM1885C1H9R9WA01#
0.ꢁpF GRM1885C1H9R9BA01#
0.ꢀ5pF GRM1885C1H9R9CA01#
0.5pF GRM1885C1H9R9DA01#
0.9mm 50Vdc CK
ꢁ.ꢀpF
0.05pF GRM1884C1H1R2WA01#
0.ꢁpF GRM1884C1H1R2BA01#
0.ꢀ5pF GRM1884C1H1R2CA01#
0.05pF GRM1884C1H1R3WA01#
0.ꢁpF GRM1884C1H1R3BA01#
0.ꢀ5pF GRM1884C1H1R3CA01#
0.05pF GRM1884C1H1R4WA01#
0.ꢁpF GRM1884C1H1R4BA01#
0.ꢀ5pF GRM1884C1H1R4CA01#
0.05pF GRM1884C1H1R5WA01#
0.ꢁpF GRM1884C1H1R5BA01#
0.ꢀ5pF GRM1884C1H1R5CA01#
0.05pF GRM1884C1H1R6WA01#
0.ꢁpF GRM1884C1H1R6BA01#
0.ꢀ5pF GRM1884C1H1R6CA01#
0.05pF GRM1884C1H1R7WA01#
0.ꢁpF GRM1884C1H1R7BA01#
0.ꢀ5pF GRM1884C1H1R7CA01#
0.05pF GRM1884C1H1R8WA01#
0.ꢁpF GRM1884C1H1R8BA01#
0.ꢀ5pF GRM1884C1H1R8CA01#
0.05pF GRM1884C1H1R9WA01#
0.ꢁpF GRM1884C1H1R9BA01#
0.ꢀ5pF GRM1884C1H1R9CA01#
0.05pF GRM1884C1H2R0WA01#
0.ꢁpF GRM1884C1H2R0BA01#
0.ꢀ5pF GRM1884C1H2R0CA01#
0.05pF GRM1883C1H2R1WA01#
0.ꢁpF GRM1883C1H2R1BA01#
0.ꢀ5pF GRM1883C1H2R1CA01#
0.05pF GRM1883C1H2R2WA01#
0.ꢁpF GRM1883C1H2R2BA01#
0.ꢀ5pF GRM1883C1H2R2CA01#
0.05pF GRM1883C1H2R3WA01#
0.ꢁpF GRM1883C1H2R3BA01#
0.ꢀ5pF GRM1883C1H2R3CA01#
0.05pF GRM1883C1H2R4WA01#
0.ꢁpF GRM1883C1H2R4BA01#
0.ꢀ5pF GRM1883C1H2R4CA01#
0.05pF GRM1883C1H2R5WA01#
0.ꢁpF GRM1883C1H2R5BA01#
0.ꢀ5pF GRM1883C1H2R5CA01#
0.05pF GRM1883C1H2R6WA01#
0.ꢁpF GRM1883C1H2R6BA01#
0.ꢀ5pF GRM1883C1H2R6CA01#
0.05pF GRM1883C1H2R7WA01#
0.ꢁpF GRM1883C1H2R7BA01#
0.ꢀ5pF GRM1883C1H2R7CA01#
0.05pF GRM1883C1H2R8WA01#
0.ꢁpF GRM1883C1H2R8BA01#
0.ꢀ5pF GRM1883C1H2R8CA01#
0.05pF GRM1883C1H2R9WA01#
0.ꢁpF GRM1883C1H2R9BA01#
0.ꢀ5pF GRM1883C1H2R9CA01#
ꢁ.3pF
ꢁ.4pF
ꢁ.5pF
ꢁ.6pF
ꢁ.7pF
ꢁ.8pF
ꢁ.9pF
ꢀ.0pF
ꢀ.ꢁpF
ꢀ.ꢀpF
ꢀ.3pF
ꢀ.4pF
ꢀ.5pF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
ꢁ0pF
ꢁꢀpF
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
GRM1885C1H100JA01#
GRM1885C1H120JA01#
GRM1885C1H150JA01#
GRM1885C1H180JA01#
GRM1885C1H220JA01#
GRM1885C1H270JA01#
GRM1885C1H330JA01#
GRM1885C1H390JA01#
GRM1885C1H470JA01#
GRM1885C1H560JA01#
GRM1885C1H680JA01#
GRM1885C1H820JA01#
GRM1885C1H101JA01#
GRM1885C1H121JA01#
GRM1885C1H151JA01#
GRM1885C1H181JA01#
GRM1885C1H221JA01#
GRM1885C1H271JA01#
GRM1885C1H331JA01#
GRM1885C1H391JA01#
GRM1885C1H471JA01#
GRM1885C1H561JA01#
GRM1885C1H681JA01#
GRM1885C1H821JA01#
GRM1885C1H102JA01#
GRM1885C1H122JA01#
GRM1885C1H152JA01#
GRM1885C1H182JA01#
GRM1885C1H222JA01#
GRM1885C1H272JA01#
GRM1885C1H332JA01#
GRM1885C1H392JA01#
ꢁ5pF
ꢁ8pF
ꢀꢀpF
ꢀ7pF
33pF
39pF
47pF
56pF
68pF
8ꢀpF
ꢁ00pF
ꢁꢀ0pF
ꢁ50pF
ꢁ80pF
ꢀꢀ0pF
ꢀ70pF
330pF
390pF
470pF
560pF
680pF
8ꢀ0pF
ꢁ000pF
ꢁꢀ00pF
ꢁ500pF
ꢁ800pF
ꢀꢀ00pF
ꢀ700pF
3300pF
3900pF
CJ
CK
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
ꢁ.0pF
0.05pF GRM1884C1HR50WA01#
0.ꢁpF GRM1884C1HR50BA01#
0.05pF GRM1884C1HR60WA01#
0.ꢁpF GRM1884C1HR60BA01#
0.05pF GRM1884C1HR70WA01#
0.ꢁpF GRM1884C1HR70BA01#
0.05pF GRM1884C1HR80WA01#
0.ꢁpF GRM1884C1HR80BA01#
0.05pF GRM1884C1HR90WA01#
0.ꢁpF GRM1884C1HR90BA01#
0.05pF GRM1884C1H1R0WA01#
0.ꢁpF GRM1884C1H1R0BA01#
0.ꢀ5pF GRM1884C1H1R0CA01#
0.05pF GRM1884C1H1R1WA01#
0.ꢁpF GRM1884C1H1R1BA01#
0.ꢀ5pF GRM1884C1H1R1CA01#
ꢁ.ꢁpF
Part number # indicates the package specification code.
58
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc
CJ
3.0pF
0.05pF GRM1883C1H3R0WA01#
0.ꢀpF GRM1883C1H3R0BA01#
0.ꢁ5pF GRM1883C1H3R0CA01#
0.05pF GRM1883C1H3R1WA01#
0.ꢀpF GRM1883C1H3R1BA01#
0.ꢁ5pF GRM1883C1H3R1CA01#
0.05pF GRM1883C1H3R2WA01#
0.ꢀpF GRM1883C1H3R2BA01#
0.ꢁ5pF GRM1883C1H3R2CA01#
0.05pF GRM1883C1H3R3WA01#
0.ꢀpF GRM1883C1H3R3BA01#
0.ꢁ5pF GRM1883C1H3R3CA01#
0.05pF GRM1883C1H3R4WA01#
0.ꢀpF GRM1883C1H3R4BA01#
0.ꢁ5pF GRM1883C1H3R4CA01#
0.05pF GRM1883C1H3R5WA01#
0.ꢀpF GRM1883C1H3R5BA01#
0.ꢁ5pF GRM1883C1H3R5CA01#
0.05pF GRM1883C1H3R6WA01#
0.ꢀpF GRM1883C1H3R6BA01#
0.ꢁ5pF GRM1883C1H3R6CA01#
0.05pF GRM1883C1H3R7WA01#
0.ꢀpF GRM1883C1H3R7BA01#
0.ꢁ5pF GRM1883C1H3R7CA01#
0.05pF GRM1883C1H3R8WA01#
0.ꢀpF GRM1883C1H3R8BA01#
0.ꢁ5pF GRM1883C1H3R8CA01#
0.05pF GRM1883C1H3R9WA01#
0.ꢀpF GRM1883C1H3R9BA01#
0.ꢁ5pF GRM1883C1H3R9CA01#
0.05pF GRM1882C1H4R0WA01#
0.ꢀpF GRM1882C1H4R0BA01#
0.ꢁ5pF GRM1882C1H4R0CA01#
0.05pF GRM1882C1H4R1WA01#
0.ꢀpF GRM1882C1H4R1BA01#
0.ꢁ5pF GRM1882C1H4R1CA01#
0.05pF GRM1882C1H4R2WA01#
0.ꢀpF GRM1882C1H4R2BA01#
0.ꢁ5pF GRM1882C1H4R2CA01#
0.05pF GRM1882C1H4R3WA01#
0.ꢀpF GRM1882C1H4R3BA01#
0.ꢁ5pF GRM1882C1H4R3CA01#
0.05pF GRM1882C1H4R4WA01#
0.ꢀpF GRM1882C1H4R4BA01#
0.ꢁ5pF GRM1882C1H4R4CA01#
0.05pF GRM1882C1H4R5WA01#
0.ꢀpF GRM1882C1H4R5BA01#
0.ꢁ5pF GRM1882C1H4R5CA01#
0.05pF GRM1882C1H4R6WA01#
0.ꢀpF GRM1882C1H4R6BA01#
0.ꢁ5pF GRM1882C1H4R6CA01#
0.05pF GRM1882C1H4R7WA01#
0.ꢀpF GRM1882C1H4R7BA01#
0.ꢁ5pF GRM1882C1H4R7CA01#
0.9mm 50Vdc CH
4.8pF
0.05pF GRM1882C1H4R8WA01#
0.ꢀpF GRM1882C1H4R8BA01#
0.ꢁ5pF GRM1882C1H4R8CA01#
0.05pF GRM1882C1H4R9WA01#
0.ꢀpF GRM1882C1H4R9BA01#
0.ꢁ5pF GRM1882C1H4R9CA01#
0.05pF GRM1882C1H5R0WA01#
0.ꢀpF GRM1882C1H5R0BA01#
0.ꢁ5pF GRM1882C1H5R0CA01#
0.05pF GRM1882C1H5R1WA01#
0.ꢀpF GRM1882C1H5R1BA01#
0.ꢁ5pF GRM1882C1H5R1CA01#
0.5pF GRM1882C1H5R1DA01#
0.05pF GRM1882C1H5R2WA01#
0.ꢀpF GRM1882C1H5R2BA01#
0.ꢁ5pF GRM1882C1H5R2CA01#
0.5pF GRM1882C1H5R2DA01#
0.05pF GRM1882C1H5R3WA01#
0.ꢀpF GRM1882C1H5R3BA01#
0.ꢁ5pF GRM1882C1H5R3CA01#
0.5pF GRM1882C1H5R3DA01#
0.05pF GRM1882C1H5R4WA01#
0.ꢀpF GRM1882C1H5R4BA01#
0.ꢁ5pF GRM1882C1H5R4CA01#
0.5pF GRM1882C1H5R4DA01#
0.05pF GRM1882C1H5R5WA01#
0.ꢀpF GRM1882C1H5R5BA01#
0.ꢁ5pF GRM1882C1H5R5CA01#
0.5pF GRM1882C1H5R5DA01#
0.05pF GRM1882C1H5R6WA01#
0.ꢀpF GRM1882C1H5R6BA01#
0.ꢁ5pF GRM1882C1H5R6CA01#
0.5pF GRM1882C1H5R6DA01#
0.05pF GRM1882C1H5R7WA01#
0.ꢀpF GRM1882C1H5R7BA01#
0.ꢁ5pF GRM1882C1H5R7CA01#
0.5pF GRM1882C1H5R7DA01#
0.05pF GRM1882C1H5R8WA01#
0.ꢀpF GRM1882C1H5R8BA01#
0.ꢁ5pF GRM1882C1H5R8CA01#
0.5pF GRM1882C1H5R8DA01#
0.05pF GRM1882C1H5R9WA01#
0.ꢀpF GRM1882C1H5R9BA01#
0.ꢁ5pF GRM1882C1H5R9CA01#
0.5pF GRM1882C1H5R9DA01#
0.05pF GRM1882C1H6R0WA01#
0.ꢀpF GRM1882C1H6R0BA01#
0.ꢁ5pF GRM1882C1H6R0CA01#
0.5pF GRM1882C1H6R0DA01#
0.05pF GRM1882C1H6R1WA01#
0.ꢀpF GRM1882C1H6R1BA01#
0.ꢁ5pF GRM1882C1H6R1CA01#
0.5pF GRM1882C1H6R1DA01#
0.05pF GRM1882C1H6R2WA01#
3.ꢀpF
3.ꢁpF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.ꢀpF
4.ꢁpF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.9pF
5.0pF
5.ꢀpF
5.ꢁpF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
6.ꢁpF
CH
Part number # indicates the package specification code.
59
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc CH
6.2pF
0.ꢀpF GRM1882C1H6R2BA01#
0.25pF GRM1882C1H6R2CA01#
0.5pF GRM1882C1H6R2DA01#
0.05pF GRM1882C1H6R3WA01#
0.ꢀpF GRM1882C1H6R3BA01#
0.25pF GRM1882C1H6R3CA01#
0.5pF GRM1882C1H6R3DA01#
0.05pF GRM1882C1H6R4WA01#
0.ꢀpF GRM1882C1H6R4BA01#
0.25pF GRM1882C1H6R4CA01#
0.5pF GRM1882C1H6R4DA01#
0.05pF GRM1882C1H6R5WA01#
0.ꢀpF GRM1882C1H6R5BA01#
0.25pF GRM1882C1H6R5CA01#
0.5pF GRM1882C1H6R5DA01#
0.05pF GRM1882C1H6R6WA01#
0.ꢀpF GRM1882C1H6R6BA01#
0.25pF GRM1882C1H6R6CA01#
0.5pF GRM1882C1H6R6DA01#
0.05pF GRM1882C1H6R7WA01#
0.ꢀpF GRM1882C1H6R7BA01#
0.25pF GRM1882C1H6R7CA01#
0.5pF GRM1882C1H6R7DA01#
0.05pF GRM1882C1H6R8WA01#
0.ꢀpF GRM1882C1H6R8BA01#
0.25pF GRM1882C1H6R8CA01#
0.5pF GRM1882C1H6R8DA01#
0.05pF GRM1882C1H6R9WA01#
0.ꢀpF GRM1882C1H6R9BA01#
0.25pF GRM1882C1H6R9CA01#
0.5pF GRM1882C1H6R9DA01#
0.05pF GRM1882C1H7R0WA01#
0.ꢀpF GRM1882C1H7R0BA01#
0.25pF GRM1882C1H7R0CA01#
0.5pF GRM1882C1H7R0DA01#
0.05pF GRM1882C1H7R1WA01#
0.ꢀpF GRM1882C1H7R1BA01#
0.25pF GRM1882C1H7R1CA01#
0.5pF GRM1882C1H7R1DA01#
0.05pF GRM1882C1H7R2WA01#
0.ꢀpF GRM1882C1H7R2BA01#
0.25pF GRM1882C1H7R2CA01#
0.5pF GRM1882C1H7R2DA01#
0.05pF GRM1882C1H7R3WA01#
0.ꢀpF GRM1882C1H7R3BA01#
0.25pF GRM1882C1H7R3CA01#
0.5pF GRM1882C1H7R3DA01#
0.05pF GRM1882C1H7R4WA01#
0.ꢀpF GRM1882C1H7R4BA01#
0.25pF GRM1882C1H7R4CA01#
0.5pF GRM1882C1H7R4DA01#
0.05pF GRM1882C1H7R5WA01#
0.ꢀpF GRM1882C1H7R5BA01#
0.25pF GRM1882C1H7R5CA01#
0.9mm 50Vdc CH
7.5pF
7.6pF
0.5pF GRM1882C1H7R5DA01#
0.05pF GRM1882C1H7R6WA01#
0.ꢀpF GRM1882C1H7R6BA01#
0.25pF GRM1882C1H7R6CA01#
0.5pF GRM1882C1H7R6DA01#
0.05pF GRM1882C1H7R7WA01#
0.ꢀpF GRM1882C1H7R7BA01#
0.25pF GRM1882C1H7R7CA01#
0.5pF GRM1882C1H7R7DA01#
0.05pF GRM1882C1H7R8WA01#
0.ꢀpF GRM1882C1H7R8BA01#
0.25pF GRM1882C1H7R8CA01#
0.5pF GRM1882C1H7R8DA01#
0.05pF GRM1882C1H7R9WA01#
0.ꢀpF GRM1882C1H7R9BA01#
0.25pF GRM1882C1H7R9CA01#
0.5pF GRM1882C1H7R9DA01#
0.05pF GRM1882C1H8R0WA01#
0.ꢀpF GRM1882C1H8R0BA01#
0.25pF GRM1882C1H8R0CA01#
0.5pF GRM1882C1H8R0DA01#
0.05pF GRM1882C1H8R1WA01#
0.ꢀpF GRM1882C1H8R1BA01#
0.25pF GRM1882C1H8R1CA01#
0.5pF GRM1882C1H8R1DA01#
0.05pF GRM1882C1H8R2WA01#
0.ꢀpF GRM1882C1H8R2BA01#
0.25pF GRM1882C1H8R2CA01#
0.5pF GRM1882C1H8R2DA01#
0.05pF GRM1882C1H8R3WA01#
0.ꢀpF GRM1882C1H8R3BA01#
0.25pF GRM1882C1H8R3CA01#
0.5pF GRM1882C1H8R3DA01#
0.05pF GRM1882C1H8R4WA01#
0.ꢀpF GRM1882C1H8R4BA01#
0.25pF GRM1882C1H8R4CA01#
0.5pF GRM1882C1H8R4DA01#
0.05pF GRM1882C1H8R5WA01#
0.ꢀpF GRM1882C1H8R5BA01#
0.25pF GRM1882C1H8R5CA01#
0.5pF GRM1882C1H8R5DA01#
0.05pF GRM1882C1H8R6WA01#
0.ꢀpF GRM1882C1H8R6BA01#
0.25pF GRM1882C1H8R6CA01#
0.5pF GRM1882C1H8R6DA01#
0.05pF GRM1882C1H8R7WA01#
0.ꢀpF GRM1882C1H8R7BA01#
0.25pF GRM1882C1H8R7CA01#
0.5pF GRM1882C1H8R7DA01#
0.05pF GRM1882C1H8R8WA01#
0.ꢀpF GRM1882C1H8R8BA01#
0.25pF GRM1882C1H8R8CA01#
0.5pF GRM1882C1H8R8DA01#
0.05pF GRM1882C1H8R9WA01#
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
6.9pF
7.0pF
7.ꢀpF
7.2pF
7.3pF
7.4pF
7.5pF
7.7pF
7.8pF
7.9pF
8.0pF
8.ꢀpF
8.2pF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
Part number # indicates the package specification code.
60
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc CH
8.9pF
0.ꢀpF GRM1882C1H8R9BA01#
0.ꢁ5pF GRM1882C1H8R9CA01#
0.5pF GRM1882C1H8R9DA01#
0.05pF GRM1882C1H9R0WA01#
0.ꢀpF GRM1882C1H9R0BA01#
0.ꢁ5pF GRM1882C1H9R0CA01#
0.5pF GRM1882C1H9R0DA01#
0.05pF GRM1882C1H9R1WA01#
0.ꢀpF GRM1882C1H9R1BA01#
0.ꢁ5pF GRM1882C1H9R1CA01#
0.5pF GRM1882C1H9R1DA01#
0.05pF GRM1882C1H9R2WA01#
0.ꢀpF GRM1882C1H9R2BA01#
0.ꢁ5pF GRM1882C1H9R2CA01#
0.5pF GRM1882C1H9R2DA01#
0.05pF GRM1882C1H9R3WA01#
0.ꢀpF GRM1882C1H9R3BA01#
0.ꢁ5pF GRM1882C1H9R3CA01#
0.5pF GRM1882C1H9R3DA01#
0.05pF GRM1882C1H9R4WA01#
0.ꢀpF GRM1882C1H9R4BA01#
0.ꢁ5pF GRM1882C1H9R4CA01#
0.5pF GRM1882C1H9R4DA01#
0.05pF GRM1882C1H9R5WA01#
0.ꢀpF GRM1882C1H9R5BA01#
0.ꢁ5pF GRM1882C1H9R5CA01#
0.5pF GRM1882C1H9R5DA01#
0.05pF GRM1882C1H9R6WA01#
0.ꢀpF GRM1882C1H9R6BA01#
0.ꢁ5pF GRM1882C1H9R6CA01#
0.5pF GRM1882C1H9R6DA01#
0.05pF GRM1882C1H9R7WA01#
0.ꢀpF GRM1882C1H9R7BA01#
0.ꢁ5pF GRM1882C1H9R7CA01#
0.5pF GRM1882C1H9R7DA01#
0.05pF GRM1882C1H9R8WA01#
0.ꢀpF GRM1882C1H9R8BA01#
0.ꢁ5pF GRM1882C1H9R8CA01#
0.5pF GRM1882C1H9R8DA01#
0.05pF GRM1882C1H9R9WA01#
0.ꢀpF GRM1882C1H9R9BA01#
0.ꢁ5pF GRM1882C1H9R9CA01#
0.5pF GRM1882C1H9R9DA01#
0.9mm 50Vdc CH
8ꢁpF
ꢀ00pF
ꢀꢁ0pF
ꢀ50pF
ꢀ80pF
ꢁꢁ0pF
ꢁ70pF
330pF
390pF
470pF
560pF
680pF
8ꢁ0pF
ꢀ000pF
ꢀꢁ00pF
ꢀ500pF
ꢀ800pF
ꢁꢁ00pF
ꢁ700pF
3300pF
3900pF
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
GRM1882C1H820JA01#
GRM1882C1H101JA01#
GRM1882C1H121JA01#
GRM1882C1H151JA01#
GRM1882C1H181JA01#
GRM1882C1H221JA01#
GRM1882C1H271JA01#
GRM1882C1H331JA01#
GRM1882C1H391JA01#
GRM1882C1H471JA01#
GRM1882C1H561JA01#
GRM1882C1H681JA01#
GRM1882C1H821JA01#
GRM1882C1H102JA01#
GRM1882C1H122JA01#
GRM1882C1H152JA01#
GRM1882C1H182JA01#
GRM1882C1H222JA01#
GRM1882C1H272JA01#
GRM1882C1H332JA01#
GRM1882C1H392JA01#
GRM1881X1H122JA01#
GRM1881X1H152JA01#
GRM1881X1H182JA01#
GRM1881X1H222JA01#
GRM1881X1H272JA01#
GRM1881X1H332JA01#
GRM1881X1H392JA01#
GRM1881X1H472JA01#
GRM1881X1H562JA01#
GRM1881X1H682JA01#
GRM1881X1H822JA01#
GRM1881X1H103JA01#
GRM1887U1H122JA01#
GRM1887U1H152JA01#
GRM1887U1H182JA01#
GRM1887U1H222JA01#
GRM1887U1H272JA01#
GRM1887U1H332JA01#
GRM1887U1H392JA01#
GRM1887U1H472JA01#
GRM1887U1H562JA01#
GRM1887U1H682JA01#
GRM1887U1H822JA01#
GRM1887U1H103JA01#
GRM1883U1H102JA01#
GRM1883U1H122JA01#
GRM1883U1H152JA01#
GRM1883U1H182JA01#
GRM1883U1H222JA01#
GRM1883U1H272JA01#
GRM1883U1H332JA01#
GRM1883U1H392JA01#
GRM1883U1H472JA01#
9.0pF
9.ꢀpF
9.ꢁpF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
SL ꢀꢁ00pF
ꢀ500pF
ꢀ800pF
ꢁꢁ00pF
ꢁ700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8ꢁ00pF
ꢀ0000pF
UꢁJ ꢀꢁ00pF
ꢀ500pF
ꢀ800pF
ꢁꢁ00pF
ꢁ700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8ꢁ00pF
ꢀ0000pF
UJ ꢀ000pF
ꢀꢁ00pF
ꢀ500pF
ꢀ800pF
ꢁꢁ00pF
ꢁ700pF
3300pF
3900pF
4700pF
ꢀ0pF
ꢀꢁpF
ꢀ5pF
ꢀ8pF
ꢁꢁpF
ꢁ7pF
33pF
39pF
47pF
56pF
68pF
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
5ꢂ
GRM1882C1H100JA01#
GRM1882C1H120JA01#
GRM1882C1H150JA01#
GRM1882C1H180JA01#
GRM1882C1H220JA01#
GRM1882C1H270JA01#
GRM1882C1H330JA01#
GRM1882C1H390JA01#
GRM1882C1H470JA01#
GRM1882C1H560JA01#
GRM1882C1H680JA01#
Part number # indicates the package specification code.
6ꢀ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc
UJ 5600pF
6800pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM1883U1H562JA01#
GRM1883U1H682JA01#
GRM1883U1H822JA01#
GRM1883U1H103JA01#
GRM1881X1A123JA01#
GRM1881X1A153JA01#
GRM1881X1A183JA01#
GRM1881X1A223JA01#
GRM1887U1A123JA01#
GRM1887U1A153JA01#
GRM1887U1A183JA01#
GRM1887U1A223JA01#
GRM1883U1A123JA01#
GRM1883U1A153JA01#
GRM1883U1A183JA01#
GRM1883U1A223JA01#
0.7mm 100Vdc CH 1500pF
1800pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM2162C2A152JA01#
GRM2162C2A182JA01#
GRM2162C2A222JA01#
GRM2162C2A272JA01#
GRM2162C2A332JA01#
GRM2165C1H122JA01#
GRM2165C1H152JA01#
GRM2165C1H182JA01#
GRM2165C1H222JA01#
GRM2165C1H272JA01#
GRM2165C1H332JA01#
GRM2165C1H392JA01#
GRM2165C1H472JA01#
GRM2162C1H122JA01#
GRM2162C1H152JA01#
GRM2162C1H182JA01#
GRM2162C1H222JA01#
GRM2162C1H272JA01#
GRM2162C1H332JA01#
GRM2162C1H392JA01#
GRM2162C1H472JA01#
GRM2161X1H123JA01#
GRM2161X1H153JA01#
GRM2161X1H183JA01#
GRM2167U1H123JA01#
GRM2167U1H153JA01#
GRM2167U1H183JA01#
GRM2163U1H103JA01#
GRM2163U1H123JA01#
GRM2163U1H153JA01#
GRM2163U1H183JA01#
GRM2195C1H562JA01#
GRM2195C1H682JA01#
GRM2195C1H822JA01#
GRM2195C1H103JA01#
GRM2195C1H123JA01#
GRM2195C1H153JA01#
GRM2192C1H562JA01#
GRM2192C1H682JA01#
GRM2192C1H822JA01#
GRM2192C1H103JA01#
GRM2192C1H123JA01#
GRM2192C1H153JA01#
GRM2191X1H223JA01#
GRM2191X1H273JA01#
GRM2197U1H223JA01#
GRM2197U1H273JA01#
GRM2193U1H223JA01#
GRM2193U1H273JA01#
GRM2191X1A563JA01#
GRM2197U1A563JA01#
GRM2193U1A563JA01#
GRM21A1X1H333JA39#
GRM21A7U1H333JA39#
8200pF
2200pF
10000pF
2700pF
10Vdc
SL 12000pF
15000pF
3300pF
50Vdc C0G 1200pF
1500pF
18000pF
22000pF
1800pF
U2J 12000pF
15000pF
2200pF
2700pF
18000pF
3300pF
22000pF
3900pF
UJ 12000pF
15000pF
4700pF
CH 1200pF
1500pF
18000pF
22000pF
1800pF
2200pF
2700pF
2.0×1.25mm
c
3300pF
3900pF
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
4700pF
0.7mm 100Vdc C0G 100pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM2165C2A101JA01#
GRM2165C2A121JA01#
GRM2165C2A151JA01#
GRM2165C2A181JA01#
GRM2165C2A221JA01#
GRM2165C2A271JA01#
GRM2165C2A331JA01#
GRM2165C2A391JA01#
GRM2165C2A471JA01#
GRM2165C2A561JA01#
GRM2165C2A681JA01#
GRM2165C2A821JA01#
GRM2165C2A102JA01#
GRM2165C2A122JA01#
GRM2165C2A152JA01#
GRM2165C2A182JA01#
GRM2165C2A222JA01#
GRM2165C2A272JA01#
GRM2165C2A332JA01#
GRM2162C2A101JA01#
GRM2162C2A121JA01#
GRM2162C2A151JA01#
GRM2162C2A181JA01#
GRM2162C2A221JA01#
GRM2162C2A271JA01#
GRM2162C2A331JA01#
GRM2162C2A391JA01#
GRM2162C2A471JA01#
GRM2162C2A561JA01#
GRM2162C2A681JA01#
GRM2162C2A821JA01#
GRM2162C2A102JA01#
GRM2162C2A122JA01#
SL 12000pF
15000pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
18000pF
U2J 12000pF
15000pF
18000pF
UJ 10000pF
12000pF
15000pF
18000pF
0.95mm 50Vdc C0G 5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
CH 5600pF
6800pF
8200pF
CH
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
10000pF
12000pF
15000pF
SL 22000pF
27000pF
U2J 22000pF
27000pF
UJ 22000pF
27000pF
10Vdc
50Vdc
SL 56000pF
U2J 56000pF
UJ 56000pF
SL 33000pF
U2J 33000pF
1mm
Part number # indicates the package specification code.
62
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
→
(
2.0×1.25mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
1mm 50Vdc UJ 33000pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM21A3U1H333JA39#
GRM21B5C1H183JA01#
GRM21B5C1H223JA01#
GRM21B2C1H183JA01#
GRM21B2C1H223JA01#
GRM21B1X1H393JA01#
GRM21B1X1H473JA01#
GRM21B7U1H393JA01#
GRM21B7U1H473JA01#
GRM21B3U1H393JA01#
GRM21B3U1H473JA01#
GRM21B1X1A683JA01#
GRM21B1X1A823JA01#
GRM21B1X1A104JA01#
GRM21B7U1A683JA01#
GRM21B7U1A823JA01#
GRM21B7U1A104JA01#
GRM21B3U1A683JA01#
GRM21B3U1A823JA01#
GRM21B3U1A104JA01#
0.95mm 50Vdc C0G 15000pF
18000pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM3195C1H153JA01#
GRM3195C1H183JA01#
GRM3195C1H223JA01#
GRM3195C1H273JA01#
GRM3195C1H333JA01#
GRM3195C1H393JA01#
GRM3192C1H123JA01#
GRM3192C1H153JA01#
GRM3192C1H183JA01#
GRM3192C1H223JA01#
GRM3192C1H273JA01#
GRM3192C1H333JA01#
GRM3192C1H393JA01#
GRM3191X1H563JA01#
GRM3197U1H563JA01#
GRM3193U1H563JA01#
GRM31M5C1H473JA01#
GRM31M5C1H563JA01#
GRM31M2C1H473JA01#
GRM31M2C1H563JA01#
GRM31M1X1H683JA01#
GRM31M1X1H823JA01#
GRM31M1X1H104JA01#
GRM31M7U1H683JA01#
GRM31M7U1H823JA01#
GRM31M7U1H104JA01#
GRM31M3U1H683JA01#
GRM31M3U1H823JA01#
GRM31M3U1H104JA01#
GRM31C5C1H683JA01#
GRM31C5C1H823JA01#
GRM31C5C1H104JA01#
GRM31C2C1H683JA01#
GRM31C2C1H823JA01#
GRM31C2C1H104JA01#
1.35mm 50Vdc C0G 18000pF
22000pF
22000pF
CH 18000pF
22000pF
27000pF
33000pF
SL 39000pF
47000pF
39000pF
CH 12000pF
15000pF
U2J 39000pF
47000pF
18000pF
UJ 39000pF
47000pF
22000pF
27000pF
10Vdc
SL 68000pF
82000pF
0.1µF
33000pF
39000pF
SL 56000pF
U2J 56000pF
UJ 56000pF
1.25mm 50Vdc C0G 47000pF
56000pF
U2J 68000pF
82000pF
0.1µF
UJ 68000pF
82000pF
0.1µF
CH 47000pF
56000pF
SL 68000pF
82000pF
3.2×1.6mm
c
0.1µF
U2J 68000pF
82000pF
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.95mm 100Vdc C0G 1800pF
2200pF
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
GRM3195C2A182JA01#
GRM3195C2A222JA01#
GRM3195C2A272JA01#
GRM3195C2A332JA01#
GRM3195C2A392JA01#
GRM3195C2A472JA01#
GRM3195C2A562JA01#
GRM3195C2A682JA01#
GRM3195C2A822JA01#
GRM3195C2A103JA01#
GRM3195C2A123JA01#
GRM3195C2A153JA01#
GRM3195C2A183JA01#
GRM3195C2A223JA01#
GRM3192C2A182JA01#
GRM3192C2A222JA01#
GRM3192C2A272JA01#
GRM3192C2A332JA01#
GRM3192C2A392JA01#
GRM3192C2A472JA01#
GRM3192C2A562JA01#
GRM3192C2A682JA01#
GRM3192C2A822JA01#
GRM3192C2A103JA01#
GRM3192C2A123JA01#
GRM3192C2A153JA01#
GRM3192C2A183JA01#
GRM3192C2A223JA01#
GRM3195C1H123JA01#
0.1µF
UJ 68000pF
82000pF
2700pF
3300pF
0.1µF
3900pF
1.8mm 50Vdc C0G 68000pF
82000pF
4700pF
5600pF
0.1µF
6800pF
CH 68000pF
82000pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
CH 1800pF
2200pF
0.1µF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
12000pF
15000pF
18000pF
22000pF
50Vdc C0G 12000pF
Part number # indicates the package specification code.
63
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
T
Rated
TC
Ultra-
Cap.
Tol.
Part Number
0.4×0.2mm
c
compact
max. Voltage Code
0.22mm 10Vdc
B
680pF
10ꢀ GRM022B31A681KE19#
20ꢀ GRM022B31A681ME19#
10ꢀ GRM022B31A102KE19#
20ꢀ GRM022B31A102ME19#
10ꢀ GRM022B31A152KE19#
20ꢀ GRM022B31A152ME19#
10ꢀ GRM022B31A222KE19#
20ꢀ GRM022B31A222ME19#
10ꢀ GRM022B31A332KE19#
20ꢀ GRM022B31A332ME19#
10ꢀ GRM022B31A472KE19#
20ꢀ GRM022B31A472ME19#
10ꢀ GRM022B31A682KE19#
20ꢀ GRM022B31A682ME19#
10ꢀ GRM022B31A103KE19#
20ꢀ GRM022B31A103ME19#
20ꢀ GRM022R60J681ME19#
20ꢀ GRM022R60J102ME19#
20ꢀ GRM022R60J152ME19#
20ꢀ GRM022R60J222ME19#
20ꢀ GRM022R60J332ME19#
20ꢀ GRM022R60J472ME19#
20ꢀ GRM022R60J682ME19#
20ꢀ GRM022R60J103ME19#
20ꢀ GRM022R60J153ME15#
10ꢀ GRM022R60J223KE15#
20ꢀ GRM022R60J223ME15#
20ꢀ GRM022R60J333ME15#
20ꢀ GRM022R60J473ME15#
20ꢀ GRM022R60J683ME15#
20ꢀ GRM022R60J104ME15#
20ꢀ GRM022B30J681ME19#
20ꢀ GRM022B30J102ME19#
20ꢀ GRM022B30J152ME19#
20ꢀ GRM022B30J222ME19#
20ꢀ GRM022B30J332ME19#
20ꢀ GRM022B30J472ME19#
20ꢀ GRM022B30J682ME19#
20ꢀ GRM022B30J103ME19#
10ꢀ GRM022R60G153KE15#
20ꢀ GRM022R60G153ME15#
10ꢀ GRM022R60G223KE15#
20ꢀ GRM022R60G223ME15#
10ꢀ GRM022R60G333KE15#
20ꢀ GRM022R60G333ME15#
10ꢀ GRM022R60G473KE15#
20ꢀ GRM022R60G473ME15#
20ꢀ GRM022R60G683ME15#
20ꢀ GRM022R60G104ME15#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.22mm 10Vdc X7R
68pF
10ꢀ GRM022R71A680KA01#
20ꢀ GRM022R71A680MA01#
10ꢀ GRM022R71A101KA01#
20ꢀ GRM022R71A101MA01#
10ꢀ GRM022R71A151KA01#
20ꢀ GRM022R71A151MA01#
10ꢀ GRM022R71A221KA01#
20ꢀ GRM022R71A221MA01#
10ꢀ GRM022R71A331KA01#
20ꢀ GRM022R71A331MA01#
10ꢀ GRM022R71A471KA01#
20ꢀ GRM022R71A471MA01#
10ꢀ GRM022R61A680KA01#
20ꢀ GRM022R61A680MA01#
10ꢀ GRM022R61A101KA01#
20ꢀ GRM022R61A101MA01#
10ꢀ GRM022R61A151KA01#
20ꢀ GRM022R61A151MA01#
10ꢀ GRM022R61A221KA01#
20ꢀ GRM022R61A221MA01#
10ꢀ GRM022R61A331KA01#
20ꢀ GRM022R61A331MA01#
10ꢀ GRM022R61A471KA01#
20ꢀ GRM022R61A471MA01#
10ꢀ GRM022R61A681KE19#
20ꢀ GRM022R61A681ME19#
10ꢀ GRM022R61A102KE19#
20ꢀ GRM022R61A102ME19#
10ꢀ GRM022R61A152KE19#
20ꢀ GRM022R61A152ME19#
10ꢀ GRM022R61A222KE19#
20ꢀ GRM022R61A222ME19#
10ꢀ GRM022R61A332KE19#
20ꢀ GRM022R61A332ME19#
10ꢀ GRM022R61A472KE19#
20ꢀ GRM022R61A472ME19#
10ꢀ GRM022R61A682KE19#
20ꢀ GRM022R61A682ME19#
10ꢀ GRM022R61A103KE19#
20ꢀ GRM022R61A103ME19#
10ꢀ GRM022B11A680KA01#
20ꢀ GRM022B11A680MA01#
10ꢀ GRM022B11A101KA01#
20ꢀ GRM022B11A101MA01#
10ꢀ GRM022B11A151KA01#
20ꢀ GRM022B11A151MA01#
10ꢀ GRM022B11A221KA01#
20ꢀ GRM022B11A221MA01#
10ꢀ GRM022B11A331KA01#
20ꢀ GRM022B11A331MA01#
10ꢀ GRM022B11A471KA01#
20ꢀ GRM022B11A471MA01#
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
100pF
150pF
220pF
330pF
470pF
68pF
X5R
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
68pF
6.3Vdc X5R 680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
Derating
Derating
Derating
Derating
Derating
Derating
Derating
33000pF
47000pF
68000pF
0.1µF
B
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
4Vdc X5R 15000pF
22000pF
B
33000pF
100pF
150pF
220pF
330pF
470pF
47000pF
68000pF
0.1µF
Part number # indicates the package specification code.
64
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
GRM Series High Dielectric Constant Type Part Number List
T
Rated
TC
Ultra-
Cap.
Tol.
Part Number
0.6×0.3mm
c
compact
max. Voltage Code
0.33mm ±5Vdc X5R 100pF
±10ꢀ GRM033R61E101KA01#
±10ꢀ GRM033R61E151KA01#
±10ꢀ GRM033R61E221KA01#
±10ꢀ GRM033R61E331KA01#
±10ꢀ GRM033R61E471KA01#
±10ꢀ GRM033R61E681KA01#
±10ꢀ GRM033R61E102KA01#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
150pF
±±0pF
330pF
470pF
680pF
1000pF
0.33mm 50Vdc X7R 100pF
±10ꢀ GRM033R71H101KA12#
±±0ꢀ GRM033R71H101MA12#
±10ꢀ GRM033R71H151KA12#
±±0ꢀ GRM033R71H151MA12#
±10ꢀ GRM033R71H221KA12#
±±0ꢀ GRM033R71H221MA12#
±10ꢀ GRM033R71H331KA12#
±±0ꢀ GRM033R71H331MA12#
±10ꢀ GRM033R71H471KA12#
±±0ꢀ GRM033R71H471MA12#
±10ꢀ GRM033R71H681KA12#
±±0ꢀ GRM033R71H681MA12#
±10ꢀ GRM033R71H102KA12#
±±0ꢀ GRM033R71H102MA12#
±10ꢀ GRM033R71H152KA12#
±±0ꢀ GRM033R71H152MA12#
±10ꢀ GRM033B31H101KA12#
±±0ꢀ GRM033B31H101MA12#
±10ꢀ GRM033B31H151KA12#
±±0ꢀ GRM033B31H151MA12#
±10ꢀ GRM033B31H221KA12#
±±0ꢀ GRM033B31H221MA12#
±10ꢀ GRM033B31H331KA12#
±±0ꢀ GRM033B31H331MA12#
±10ꢀ GRM033B31H471KA12#
±±0ꢀ GRM033B31H471MA12#
±10ꢀ GRM033B31H681KA12#
±±0ꢀ GRM033B31H681MA12#
±10ꢀ GRM033B31H102KA12#
±±0ꢀ GRM033B31H102MA12#
±10ꢀ GRM033B31H152KA12#
±±0ꢀ GRM033B31H152MA12#
±10ꢀ GRM033R71E101KA01#
±10ꢀ GRM033R71E151KA01#
±10ꢀ GRM033R71E221KA01#
±10ꢀ GRM033R71E331KA01#
±10ꢀ GRM033R71E471KA01#
±10ꢀ GRM033R71E681KA01#
±10ꢀ GRM033R71E102KA01#
±10ꢀ GRM033R71E152KA01#
±10ꢀ GRM033R71E222KA12#
±±0ꢀ GRM033R71E222MA12#
±10ꢀ GRM033R71E332KA12#
±±0ꢀ GRM033R71E332MA12#
±10ꢀ GRM033R11E101KA01#
±10ꢀ GRM033R11E151KA01#
±10ꢀ GRM033R11E221KA01#
±10ꢀ GRM033R11E331KA01#
±10ꢀ GRM033R11E471KA01#
±10ꢀ GRM033R11E681KA01#
±10ꢀ GRM033R11E102KA01#
±10ꢀ GRM033R11E152KA01#
150pF
±±0pF
330pF
470pF
680pF
1000pF
1500pF
Derating
10000pF ±10ꢀ GRM033R61E103KA12#
±±0ꢀ GRM033R61E103MA12#
Derating
B
100pF
150pF
±±0pF
330pF
470pF
680pF
1000pF
±10ꢀ GRM033B11E101KA01#
±10ꢀ GRM033B11E151KA01#
±10ꢀ GRM033B11E221KA01#
±10ꢀ GRM033B11E331KA01#
±10ꢀ GRM033B11E471KA01#
±10ꢀ GRM033B11E681KA01#
±10ꢀ GRM033B11E102KA01#
±±0ꢀ GRM033B11E102MA01#
±10ꢀ GRM033B11E152KA01#
±±0ꢀ GRM033B11E152MA01#
±10ꢀ GRM033B31E222KA12#
±±0ꢀ GRM033B31E222MA12#
±10ꢀ GRM033B31E332KA12#
±±0ꢀ GRM033B31E332MA12#
1500pF
±±00pF
3300pF
B
100pF
150pF
±±0pF
330pF
470pF
680pF
1000pF
1500pF
Derating
Derating
10000pF ±10ꢀ GRM033B31E103KA12#
±±0ꢀ GRM033B31E103MA12#
16Vdc X7R ±±00pF
3300pF
±10ꢀ GRM033R71C222KA88#
±10ꢀ GRM033R71C332KA88#
±10ꢀ GRM033R11C222KA88#
±10ꢀ GRM033R11C332KA88#
R
±±00pF
3300pF
X5R 10000pF ±10ꢀ GRM033R61C103KA12#
±±0ꢀ GRM033R61C103MA12#
Derating
Derating
0.1µF
±±00pF
3300pF
±10ꢀ GRM033R61C104KE84#
±±0ꢀ GRM033R61C104ME84#
±10ꢀ GRM033B31C222KA87#
±±0ꢀ GRM033B31C222MA87#
±10ꢀ GRM033B31C332KA87#
±±0ꢀ GRM033B31C332MA87#
B
±5Vdc X7R 100pF
150pF
±±0pF
330pF
10000pF ±10ꢀ GRM033B31C103KA12#
±±0ꢀ GRM033B31C103MA12#
470pF
Derating
Derating
680pF
0.1µF
±10ꢀ GRM033B31C104KE84#
±±0ꢀ GRM033B31C104ME84#
±10ꢀ GRM033R71A472KA01#
±±0ꢀ GRM033R71A472MA01#
±10ꢀ GRM033R71A682KA01#
±±0ꢀ GRM033R71A682MA01#
1000pF
1500pF
10Vdc X7R 4700pF
6800pF
±±00pF
3300pF
10000pF ±10ꢀ GRM033R71A103KA01#
±±0ꢀ GRM033R71A103MA01#
R
100pF
150pF
±±0pF
330pF
470pF
680pF
1000pF
1500pF
R
4700pF
±10ꢀ GRM033R11A472KA01#
±±0ꢀ GRM033R11A472MA01#
±10ꢀ GRM033R11A682KA01#
±±0ꢀ GRM033R11A682MA01#
6800pF
10000pF ±10ꢀ GRM033R11A103KA01#
±±0ꢀ GRM033R11A103MA01#
X5R 4700pF
±10ꢀ GRM033R61A472KA01#
Part number # indicates the package specification code.
65
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
GRM Series High Dielectric Constant Type Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 10Vdc X5R 4700pF
6800pF
±±0ꢀ GRM033R61A472MA01#
±10ꢀ GRM033R61A682KA01#
±±0ꢀ GRM033R61A682MA01#
0.33mm 6.3Vdc X7R 10000pF ±10ꢀ GRM033R70J103KA01#
R
4700pF
6800pF
±10ꢀ GRM033R10J472KA01#
±10ꢀ GRM033R10J682KA01#
10000pF ±10ꢀ GRM033R61A103KA01#
±±0ꢀ GRM033R61A103MA01#
10000pF ±10ꢀ GRM033R10J103KA01#
X6S 15000pF ±10ꢀ GRM033C80J153KE01#
±±0ꢀ GRM033C80J153ME01#
1±000pF ±10ꢀ GRM033R61A123KE84#
±±0ꢀ GRM033R61A123ME84#
±±000pF ±10ꢀ GRM033C80J223KE01#
±±0ꢀ GRM033C80J223ME01#
15000pF ±10ꢀ GRM033R61A153KE84#
±±0ꢀ GRM033R61A153ME84#
33000pF ±10ꢀ GRM033C80J333KE01#
±±0ꢀ GRM033C80J333ME01#
18000pF ±10ꢀ GRM033R61A183KE84#
±±0ꢀ GRM033R61A183ME84#
47000pF ±10ꢀ GRM033C80J473KE19#
±±0ꢀ GRM033C80J473ME19#
±±000pF ±10ꢀ GRM033R61A223KE84#
±±0ꢀ GRM033R61A223ME84#
Derating
68000pF ±10ꢀ GRM033C80J683KE84#
±±0ꢀ GRM033C80J683ME84#
Derating
Derating
Derating
Derating
±7000pF ±10ꢀ GRM033R61A273KE84#
±±0ꢀ GRM033R61A273ME84#
0.1µF
±10ꢀ GRM033C80J104KE84#
±±0ꢀ GRM033C80J104ME84#
±±0ꢀ GRM033C80J224ME90#
33000pF ±10ꢀ GRM033R61A333KE84#
±±0ꢀ GRM033R61A333ME84#
0.±±µF
39000pF ±10ꢀ GRM033R61A393KE84#
±±0ꢀ GRM033R61A393ME84#
X5R 10000pF ±10ꢀ GRM033R60J103KA01#
15000pF ±10ꢀ GRM033R60J153KE01#
±±0ꢀ GRM033R60J153ME01#
47000pF ±10ꢀ GRM033R61A473KE84#
±±0ꢀ GRM033R61A473ME84#
±±000pF ±10ꢀ GRM033R60J223KE01#
±±0ꢀ GRM033R60J223ME01#
68000pF ±10ꢀ GRM033R61A683KE84#
±±0ꢀ GRM033R61A683ME84#
33000pF ±10ꢀ GRM033R60J333KE01#
±±0ꢀ GRM033R60J333ME01#
0.1µF
±10ꢀ GRM033R61A104KE84#
±±0ꢀ GRM033R61A104ME84#
±±0ꢀ GRM033R61A224ME90#
±10ꢀ GRM033B11A472KA01#
±±0ꢀ GRM033B11A472MA01#
±10ꢀ GRM033B11A682KA01#
±±0ꢀ GRM033B11A682MA01#
47000pF ±10ꢀ GRM033R60J473KE19#
±±0ꢀ GRM033R60J473ME19#
Derating
0.±±µF
4700pF
B
0.±±µF
4700pF
6800pF
±±0ꢀ GRM033R60J224ME90#
±10ꢀ GRM033B10J472KA01#
±10ꢀ GRM033B10J682KA01#
B
6800pF
10000pF ±10ꢀ GRM033B10J103KA01#
15000pF ±10ꢀ GRM033B10J153KE01#
±±0ꢀ GRM033B10J153ME01#
10000pF ±10ꢀ GRM033B11A103KA01#
±±0ꢀ GRM033B11A103MA01#
1±000pF ±10ꢀ GRM033B31A123KE84#
±±0ꢀ GRM033B31A123ME84#
±±000pF ±10ꢀ GRM033B10J223KE01#
±±0ꢀ GRM033B10J223ME01#
15000pF ±10ꢀ GRM033B31A153KE84#
±±0ꢀ GRM033B31A153ME84#
33000pF ±10ꢀ GRM033B10J333KE01#
±±0ꢀ GRM033B10J333ME01#
18000pF ±10ꢀ GRM033B31A183KE84#
±±0ꢀ GRM033B31A183ME84#
47000pF ±10ꢀ GRM033B30J473KE18#
±±0ꢀ GRM033B30J473ME18#
±±000pF ±10ꢀ GRM033B31A223KE84#
±±0ꢀ GRM033B31A223ME84#
4Vdc X6S 0.±±µF
±±0ꢀ GRM033C80G224ME90#
±7000pF ±10ꢀ GRM033B31A273KE84#
±±0ꢀ GRM033B31A273ME84#
1.0×0.5mm
c
33000pF ±10ꢀ GRM033B31A333KE84#
±±0ꢀ GRM033B31A333ME84#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
Derating
Derating
Derating
Derating
Derating
Derating
Derating
Derating
Derating
Derating
39000pF ±10ꢀ GRM033B31A393KE84#
±±0ꢀ GRM033B31A393ME84#
0.±±mm 10Vdc X5R 0.1µF
0.±±µF
±10ꢀ GRM152R61A104KE19#
±±0ꢀ GRM152R61A104ME19#
±10ꢀ GRM152R61A224KE19#
±±0ꢀ GRM152R61A224ME19#
±10ꢀ GRM152B31A104KE19#
±±0ꢀ GRM152B31A104ME19#
±10ꢀ GRM152B31A224KE19#
±±0ꢀ GRM152B31A224ME19#
±10ꢀ GRM152C80J104KE19#
±±0ꢀ GRM152C80J104ME19#
47000pF ±10ꢀ GRM033B31A473KE84#
±±0ꢀ GRM033B31A473ME84#
68000pF ±10ꢀ GRM033B31A683KE84#
±±0ꢀ GRM033B31A683ME84#
B
0.1µF
0.±±µF
0.1µF
0.1µF
±10ꢀ GRM033B31A104KE84#
±±0ꢀ GRM033B31A104ME84#
±10ꢀ GRM033R70J472KA01#
±10ꢀ GRM033R70J682KA01#
6.3Vdc X7R 4700pF
6800pF
6.3Vdc X6S
Part number # indicates the package specification code.
66
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.±,20±2
GRM Series High Dielectric Constant Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
Derating
Derating
0.22mm 6.3Vdc X6S 0.22µF
±±0ꢀ GRM152C80J224KE19#
±20ꢀ GRM152C80J224ME19#
±±0ꢀ GRM152R60J104KE19#
±20ꢀ GRM152R60J104ME19#
±±0ꢀ GRM152R60J224KE19#
±20ꢀ GRM152R60J224ME19#
±20ꢀ GRM152R60J474ME15#
±±0ꢀ GRM152B30J104KE19#
±20ꢀ GRM152B30J104ME19#
±±0ꢀ GRM152B30J224KE19#
±20ꢀ GRM152B30J224ME19#
±20ꢀ GRM152B30J474ME15#
±±0ꢀ GRM152D70G104KE15#
±20ꢀ GRM152D70G104ME15#
±±0ꢀ GRM152D70G224KE15#
±20ꢀ GRM152D70G224ME15#
±±0ꢀ GRM152C80G104KE19#
±20ꢀ GRM152C80G104ME19#
±±0ꢀ GRM152C80G224KE19#
±20ꢀ GRM152C80G224ME19#
±20ꢀ GRM152D80G474ME15#
±±0ꢀ GRM152D70E104KE19#
±20ꢀ GRM152D70E104ME19#
±±0ꢀ GRM152D70E224KE19#
±20ꢀ GRM152D70E224ME19#
±±0ꢀ GRM15XR71H221KA86#
±±0ꢀ GRM15XR71H331KA86#
±±0ꢀ GRM15XR71H471KA86#
±±0ꢀ GRM15XR71H681KA86#
±±0ꢀ GRM15XR71H102KA86#
±±0ꢀ GRM15XR71H152KA86#
±±0ꢀ GRM15XR11H221KA86#
±±0ꢀ GRM15XR11H331KA86#
±±0ꢀ GRM15XR11H471KA86#
±±0ꢀ GRM15XR11H681KA86#
±±0ꢀ GRM15XR11H102KA86#
±±0ꢀ GRM15XR11H152KA86#
±±0ꢀ GRM15XB11H221KA86#
±20ꢀ GRM15XB11H221MA86#
±±0ꢀ GRM15XB11H331KA86#
±20ꢀ GRM15XB11H331MA86#
±±0ꢀ GRM15XB11H471KA86#
±20ꢀ GRM15XB11H471MA86#
±±0ꢀ GRM15XB11H681KA86#
±20ꢀ GRM15XB11H681MA86#
±±0ꢀ GRM15XB11H102KA86#
±20ꢀ GRM15XB11H102MA86#
±±0ꢀ GRM15XB11H152KA86#
±20ꢀ GRM15XB11H152MA86#
±±0ꢀ GRM15XR71E222KA86#
±20ꢀ GRM15XR71E222MA86#
±±0ꢀ GRM15XB11E222KA86#
±20ꢀ GRM15XB11E222MA86#
±±0ꢀ GRM15XR71C332KA86#
0.3mm ±6Vdc X7R 3300pF
4700pF
±20ꢀ GRM15XR71C332MA86#
±±0ꢀ GRM15XR71C472KA86#
±20ꢀ GRM15XR71C472MA86#
±±0ꢀ GRM15XR71C682KA86#
±20ꢀ GRM15XR71C682MA86#
X5R 0.±µF
0.22µF
6800pF
±0000pF ±±0ꢀ GRM15XR71C103KA86#
±20ꢀ GRM15XR71C103MA86#
Derating
0.47µF
B
0.±µF
B
3300pF
4700pF
6800pF
±±0ꢀ GRM15XB11C332KA86#
±20ꢀ GRM15XB11C332MA86#
±±0ꢀ GRM15XB11C472KA86#
±20ꢀ GRM15XB11C472MA86#
±±0ꢀ GRM15XB11C682KA86#
±20ꢀ GRM15XB11C682MA86#
0.22µF
Derating
Derating
Derating
Derating
Derating
0.47µF
0.±µF
4Vdc X7T
±0000pF ±±0ꢀ GRM15XB11C103KA86#
±20ꢀ GRM15XB11C103MA86#
0.22µF
0.±µF
±0Vdc X5R ±5000pF ±±0ꢀ GRM15XR61A153KA86#
±20ꢀ GRM15XR61A153MA86#
X6S
22000pF ±±0ꢀ GRM15XR61A223KA86#
±20ꢀ GRM15XR61A223MA86#
0.22µF
33000pF ±±0ꢀ GRM15XR61A333KA86#
±20ꢀ GRM15XR61A333MA86#
X6T 0.47µF
Derating
2.5Vdc X7T
0.±µF
0.33mm ±0Vdc X5R ±.0µF
±20ꢀ GRM153R61A105ME95#
±20ꢀ GRM153B31A105ME95#
±20ꢀ GRM153D80J105ME95#
±20ꢀ GRM153R60J105ME95#
±20ꢀ GRM153B30J105ME95#
±20ꢀ GRM153D80G105ME95#
±20ꢀ GRM153R60G105ME95#
±±0ꢀ GRM155R72A221KA01#
±±0ꢀ GRM155R72A331KA01#
±±0ꢀ GRM155R72A471KA01#
±±0ꢀ GRM155R72A681KA01#
±±0ꢀ GRM155R72A102KA01#
±±0ꢀ GRM155R72A152KA01#
±±0ꢀ GRM155R72A222KA01#
±±0ꢀ GRM155R72A332KA01#
±±0ꢀ GRM155R72A472KA01#
±±0ꢀ GRM155R71H221KA01#
±±0ꢀ GRM155R71H331KA01#
±±0ꢀ GRM155R71H471KA01#
±±0ꢀ GRM155R71H681KA01#
±±0ꢀ GRM155R71H102KA01#
±±0ꢀ GRM155R71H152KA01#
±±0ꢀ GRM155R71H222KA01#
±±0ꢀ GRM155R71H332KA01#
±±0ꢀ GRM155R71H472KA01#
±±0ꢀ GRM155R71H682KA88#
Derating
Derating
B
±.0µF
±.0µF
0.22µF
6.3Vdc X6T
X5R ±.0µF
0.3mm 50Vdc X7R 220pF
B
±.0µF
±.0µF
330pF
470pF
680pF
±000pF
±500pF
4Vdc X6T
X5R ±.0µF
0.55mm ±00Vdc X7R 220pF
330pF
470pF
R
220pF
330pF
470pF
680pF
±000pF
±500pF
220pF
680pF
±000pF
±500pF
2200pF
3300pF
4700pF
B
50Vdc X7R 220pF
330pF
330pF
470pF
680pF
±000pF
±500pF
470pF
680pF
±000pF
±500pF
2200pF
3300pF
4700pF
6800pF
±0000pF ±±0ꢀ GRM155R71H103KA88#
±5000pF ±±0ꢀ GRM155R71H153KA12#
22000pF ±±0ꢀ GRM155R71H223KA12#
25Vdc X7R 2200pF
0.±µF
±±0ꢀ GRM155R71H104KE14#
±20ꢀ GRM155R71H104ME14#
B
2200pF
X7S 33000pF ±±0ꢀ GRM155C71H333KE19#
±20ꢀ GRM155C71H333ME19#
±6Vdc X7R 3300pF
Part number # indicates the package specification code.
67
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.±,ꢁ0±ꢁ
GRM Series High Dielectric Constant Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc X7S 47000pF ±±0ꢀ GRM155C71H473KE19#
±ꢁ0ꢀ GRM155C71H473ME19#
0.55mm 50Vdc
B
0.±µF
±±0ꢀ GRM155B31H104KE14#
±ꢁ0ꢀ GRM155B31H104ME14#
±±0ꢀ GRM155R71E682KA01#
68000pF ±±0ꢀ GRM155C71H683KE19#
±ꢁ0ꢀ GRM155C71H683ME19#
ꢁ5Vdc X7R 6800pF
±0000pF ±±0ꢀ GRM155R71E103KA01#
±5000pF ±±0ꢀ GRM155R71E153KA61#
ꢁꢁ000pF ±±0ꢀ GRM155R71E223KA61#
33000pF ±±0ꢀ GRM155R71E333KA88#
47000pF ±±0ꢀ GRM155R71E473KA88#
R
ꢁꢁ0pF
330pF
±±0ꢀ GRM155R11H221KA01#
±±0ꢀ GRM155R11H331KA01#
±±0ꢀ GRM155R11H471KA01#
±±0ꢀ GRM155R11H681KA01#
±±0ꢀ GRM155R11H102KA01#
±±0ꢀ GRM155R11H152KA01#
±±0ꢀ GRM155R11H222KA01#
±±0ꢀ GRM155R11H332KA01#
±±0ꢀ GRM155R11H472KA01#
±±0ꢀ GRM155R11H682KA88#
470pF
680pF
±000pF
±500pF
ꢁꢁ00pF
3300pF
4700pF
6800pF
0.±µF
±±0ꢀ GRM155R71E104KE14#
±ꢁ0ꢀ GRM155R71E104ME14#
±±0ꢀ GRM155R11E682KA01#
R
6800pF
±0000pF ±±0ꢀ GRM155R11E103KA01#
±5000pF ±±0ꢀ GRM155R11E153KA61#
ꢁꢁ000pF ±±0ꢀ GRM155R11E223KA61#
33000pF ±±0ꢀ GRM155R11E333KA88#
47000pF ±±0ꢀ GRM155R11E473KA88#
±0000pF ±±0ꢀ GRM155R11H103KA88#
X6S
0.±µF
±±0ꢀ GRM155C81H104KE14#
±ꢁ0ꢀ GRM155C81H104ME14#
±±0ꢀ GRM155R61H102KA01#
±±0ꢀ GRM155R61H222KA01#
±±0ꢀ GRM155R61H472KA01#
X6S 68000pF ±±0ꢀ GRM155C81E683KA12#
X5R ±000pF
ꢁꢁ00pF
0.±µF
±±0ꢀ GRM155C81E104KA12#
±ꢁ0ꢀ GRM155C81E104MA12#
4700pF
X5R 68000pF ±±0ꢀ GRM155R61E683KA87#
±ꢁ0ꢀ GRM155R61E683MA87#
33000pF ±±0ꢀ GRM155R61H333KE19#
±ꢁ0ꢀ GRM155R61H333ME19#
0.±µF
±±0ꢀ GRM155R61E104KA87#
±ꢁ0ꢀ GRM155R61E104MA87#
±±0ꢀ GRM155R61E105KA12#
±ꢁ0ꢀ GRM155R61E105MA12#
±±0ꢀ GRM155B11E472KA01#
±±0ꢀ GRM155B11E682KA01#
47000pF ±±0ꢀ GRM155R61H473KE19#
±ꢁ0ꢀ GRM155R61H473ME19#
Derating
±.0µF
Derating
68000pF ±±0ꢀ GRM155R61H683KE19#
±ꢁ0ꢀ GRM155R61H683ME19#
B
4700pF
6800pF
0.±µF
±±0ꢀ GRM155R61H104KE14#
±ꢁ0ꢀ GRM155R61H104ME14#
±±0ꢀ GRM155B11H221KA01#
±ꢁ0ꢀ GRM155B11H221MA01#
±±0ꢀ GRM155B11H331KA01#
±ꢁ0ꢀ GRM155B11H331MA01#
±±0ꢀ GRM155B11H471KA01#
±ꢁ0ꢀ GRM155B11H471MA01#
±±0ꢀ GRM155B11H681KA01#
±ꢁ0ꢀ GRM155B11H681MA01#
±±0ꢀ GRM155B11H102KA01#
±ꢁ0ꢀ GRM155B11H102MA01#
±±0ꢀ GRM155B11H152KA01#
±ꢁ0ꢀ GRM155B11H152MA01#
±±0ꢀ GRM155B11H222KA01#
±ꢁ0ꢀ GRM155B11H222MA01#
±±0ꢀ GRM155B11H332KA01#
±ꢁ0ꢀ GRM155B11H332MA01#
±±0ꢀ GRM155B11H472KA01#
±ꢁ0ꢀ GRM155B11H472MA01#
±±0ꢀ GRM155B31H682KA88#
±ꢁ0ꢀ GRM155B31H682MA88#
±0000pF ±±0ꢀ GRM155B11E103KA01#
±ꢁ0ꢀ GRM155B11E103MA01#
B
ꢁꢁ0pF
±5000pF ±±0ꢀ GRM155B11E153KA61#
±ꢁ0ꢀ GRM155B11E153MA61#
330pF
ꢁꢁ000pF ±±0ꢀ GRM155B11E223KA61#
±ꢁ0ꢀ GRM155B11E223MA61#
470pF
33000pF ±±0ꢀ GRM155B31E333KA87#
±ꢁ0ꢀ GRM155B31E333MA87#
680pF
47000pF ±±0ꢀ GRM155B31E473KA87#
±ꢁ0ꢀ GRM155B31E473MA87#
±000pF
±500pF
ꢁꢁ00pF
3300pF
4700pF
6800pF
68000pF ±±0ꢀ GRM155B31E683KA87#
±ꢁ0ꢀ GRM155B31E683MA87#
0.±µF
±±0ꢀ GRM155B31E104KA87#
±ꢁ0ꢀ GRM155B31E104MA87#
±±0ꢀ GRM155B31E105KA12#
±ꢁ0ꢀ GRM155B31E105MA12#
Derating
Derating
±.0µF
±6Vdc X7R 33000pF ±±0ꢀ GRM155R71C333KA01#
47000pF ±±0ꢀ GRM155R71C473KA01#
68000pF ±±0ꢀ GRM155R71C683KA88#
0.±5µF
0.ꢁꢁµF
±±0ꢀ GRM155R71C154KA12#
±±0ꢀ GRM155R71C224KA12#
±0000pF ±±0ꢀ GRM155B31H103KA88#
±ꢁ0ꢀ GRM155B31H103MA88#
R
33000pF ±±0ꢀ GRM155R11C333KA01#
47000pF ±±0ꢀ GRM155R11C473KA01#
68000pF ±±0ꢀ GRM155R11C683KA88#
±5000pF ±±0ꢀ GRM155B31H153KA12#
±ꢁ0ꢀ GRM155B31H153MA12#
X5R 33000pF ±±0ꢀ GRM155R61C333KA01#
47000pF ±±0ꢀ GRM155R61C473KA01#
68000pF ±±0ꢀ GRM155R61C683KA88#
ꢁꢁ000pF ±±0ꢀ GRM155B31H223KA12#
±ꢁ0ꢀ GRM155B31H223MA12#
Part number # indicates the package specification code.
68
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
GRM Series High Dielectric Constant Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 16Vdc X5R 1.0µF
±10ꢀ GRM155R61C105KA12#
±±0ꢀ GRM155R61C105MA12#
0.55mm 6.3Vdc X5R 0.33µF
0.47µF
±±0ꢀ GRM155R60J334ME01#
±10ꢀ GRM155R60J474KE19#
±±0ꢀ GRM155R60J474ME19#
±10ꢀ GRM155R60J684KE19#
±±0ꢀ GRM155R60J684ME19#
±10ꢀ GRM155R60J225KE95#
±±0ꢀ GRM155R60J225ME95#
±10ꢀ GRM155B10J154KE01#
±±0ꢀ GRM155B10J154ME01#
±10ꢀ GRM155B10J224KE01#
±±0ꢀ GRM155B10J224ME01#
±10ꢀ GRM155B10J334KE01#
±±0ꢀ GRM155B10J334ME01#
±10ꢀ GRM155B30J474KE18#
±±0ꢀ GRM155B30J474ME18#
±10ꢀ GRM155B30J684KE18#
±±0ꢀ GRM155B30J684ME18#
±10ꢀ GRM155B30J225KE95#
±±0ꢀ GRM155B30J225ME95#
±10ꢀ GRM155R70G105KA12#
±±0ꢀ GRM155R70G105MA12#
±10ꢀ GRM155C80G154KE01#
±±0ꢀ GRM155C80G154ME01#
±10ꢀ GRM155C80G224KE01#
±±0ꢀ GRM155C80G224ME01#
±10ꢀ GRM155C80G334KE01#
±±0ꢀ GRM155C80G334ME01#
±10ꢀ GRM155C80G474KE01#
±±0ꢀ GRM155C80G474ME01#
±10ꢀ GRM155D80G225KE95#
±±0ꢀ GRM155D80G225ME95#
±±0ꢀ GRM155R60J475ME47#
±±0ꢀ GRM155B30J475ME47#
±±0ꢀ GRM155R60G475ME47#
±±0ꢀ GRM155B30G475ME47#
±±0ꢀ GRM155D80E475ME47#
±±0ꢀ GRM155R60G106ME44#
±±0ꢀ GRM155R60E106ME16#
B
33000pF ±10ꢀ GRM155B11C333KA01#
47000pF ±10ꢀ GRM155B11C473KA01#
68000pF ±10ꢀ GRM155B31C683KA87#
0.68µF
±.±µF
1.0µF
±10ꢀ GRM155B31C105KA12#
±±0ꢀ GRM155B31C105MA12#
10Vdc X7R 68000pF ±10ꢀ GRM155R71A683KA01#
±±0ꢀ GRM155R71A683MA01#
B
0.15µF
0.±±µF
0.33µF
0.47µF
0.68µF
±.±µF
R
68000pF ±10ꢀ GRM155R11A683KA01#
±±0ꢀ GRM155R11A683MA01#
X6S
1.0µF
±10ꢀ GRM155C81A105KA12#
±±0ꢀ GRM155C81A105MA12#
±10ꢀ GRM155R61A154KE19#
±±0ꢀ GRM155R61A154ME19#
±10ꢀ GRM155R61A224KE19#
±±0ꢀ GRM155R61A224ME19#
±10ꢀ GRM155R61A334KE15#
±±0ꢀ GRM155R61A334ME15#
±10ꢀ GRM155R61A474KE15#
±±0ꢀ GRM155R61A474ME15#
±10ꢀ GRM155R61A684KE15#
±±0ꢀ GRM155R61A684ME15#
±10ꢀ GRM155R61A225KE95#
±±0ꢀ GRM155R61A225ME95#
±10ꢀ GRM155B31A154KE18#
±±0ꢀ GRM155B31A154ME18#
±10ꢀ GRM155B31A224KE18#
±±0ꢀ GRM155B31A224ME18#
±10ꢀ GRM155B31A334KE14#
±±0ꢀ GRM155B31A334ME14#
±10ꢀ GRM155B31A474KE14#
±±0ꢀ GRM155B31A474ME14#
±10ꢀ GRM155B31A684KE15#
±±0ꢀ GRM155B31A684ME15#
±10ꢀ GRM155B31A225KE95#
±±0ꢀ GRM155B31A225ME95#
±10ꢀ GRM155R70J105KA12#
±±0ꢀ GRM155R70J105MA12#
±10ꢀ GRM155C80J154KE01#
±±0ꢀ GRM155C80J154ME01#
±10ꢀ GRM155C80J224KE01#
±±0ꢀ GRM155C80J224ME01#
±10ꢀ GRM155C80J334KE01#
±±0ꢀ GRM155C80J334ME01#
±10ꢀ GRM155C80J474KE19#
±±0ꢀ GRM155C80J474ME19#
±10ꢀ GRM155C80J225KE95#
±±0ꢀ GRM155C80J225ME95#
±10ꢀ GRM155R60J154KE01#
±±0ꢀ GRM155R60J154ME01#
±10ꢀ GRM155R60J224KE01#
±±0ꢀ GRM155R60J224ME01#
±10ꢀ GRM155R60J334KE01#
X5R 0.15µF
0.±±µF
0.33µF
0.47µF
4Vdc X7R 1.0µF
X6S 0.15µF
0.±±µF
0.68µF
Derating
Derating
±.±µF
B
0.15µF
0.±±µF
0.33µF
0.47µF
0.68µF
±.±µF
0.33µF
0.47µF
X6T
±.±µF
Derating
0.6mm 6.3Vdc X5R 4.7µF
4.7µF
4Vdc X5R 4.7µF
Derating
B
B
±.5Vdc X6T
4.7µF
4.7µF
10µF
10µF
Derating
Derating
Derating
Derating
Derating
0.7mm 4Vdc X5R
±.5Vdc X5R
6.3Vdc X7R 1.0µF
X6S 0.15µF
0.±±µF
1.6×0.8mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
Derating
Derating
Derating
Derating
0.33µF
0.5mm ±5Vdc X5R 1.0µF
±10ꢀ GRM185R61E105KA12#
±±0ꢀ GRM185R61E105MA12#
±10ꢀ GRM185B31E105KA12#
±±0ꢀ GRM185B31E105MA12#
±10ꢀ GRM185R61C105KE44#
±±0ꢀ GRM185R61C105ME44#
±10ꢀ GRM185B31C105KE43#
±±0ꢀ GRM185B31C105ME43#
±10ꢀ GRM188R72A221KA01#
±10ꢀ GRM188R72A331KA01#
±10ꢀ GRM188R72A471KA01#
0.47µF
B
1.0µF
Derating
Derating
±.±µF
16Vdc X5R 1.0µF
X5R 0.15µF
0.±±µF
B
1.0µF
0.9mm 100Vdc X7R ±±0pF
330pF
470pF
0.33µF
Part number # indicates the package specification code.
69
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc X7R 680pF
10ꢀ GRM188R72A681KA01#
10ꢀ GRM188R72A102KA01#
10ꢀ GRM188R72A152KA01#
10ꢀ GRM188R72A222KA01#
10ꢀ GRM188R72A332KA01#
10ꢀ GRM188R72A472KA01#
10ꢀ GRM188R72A682KA01#
10ꢀ GRM188R72A103KA01#
10ꢀ GRM188R72A153KAC4#
20ꢀ GRM188R72A153MAC4#
10ꢀ GRM188R72A223KAC4#
20ꢀ GRM188R72A223MAC4#
10ꢀ GRM188R72A104KA35#
10ꢀ GRM188R71H221KA01#
10ꢀ GRM188R71H331KA01#
10ꢀ GRM188R71H471KA01#
10ꢀ GRM188R71H681KA01#
10ꢀ GRM188R71H102KA01#
10ꢀ GRM188R71H152KA01#
10ꢀ GRM188R71H222KA01#
10ꢀ GRM188R71H332KA01#
10ꢀ GRM188R71H472KA01#
10ꢀ GRM188R71H682KA01#
10ꢀ GRM188R71H103KA01#
10ꢀ GRM188R71H153KA01#
10ꢀ GRM188R71H223KA01#
10ꢀ GRM188R71H333KA61#
10ꢀ GRM188R71H473KA61#
10ꢀ GRM188R71H683KA93#
10ꢀ GRM188R71H104KA93#
10ꢀ GRM188R11H221KA01#
10ꢀ GRM188R11H331KA01#
10ꢀ GRM188R11H471KA01#
10ꢀ GRM188R11H681KA01#
10ꢀ GRM188R11H102KA01#
10ꢀ GRM188R11H152KA01#
10ꢀ GRM188R11H222KA01#
10ꢀ GRM188R11H332KA01#
10ꢀ GRM188R11H472KA01#
10ꢀ GRM188R11H682KA01#
10ꢀ GRM188R11H103KA01#
10ꢀ GRM188R11H153KA01#
10ꢀ GRM188R11H223KA01#
10ꢀ GRM188R11H333KA61#
10ꢀ GRM188R11H473KA61#
10ꢀ GRM188R11H683KA93#
10ꢀ GRM188R11H104KA93#
10ꢀ GRM188R61H102KA01#
10ꢀ GRM188R61H222KA01#
10ꢀ GRM188R61H472KA01#
10ꢀ GRM188R61H103KA01#
10ꢀ GRM188R61H223KA01#
10ꢀ GRM188R61H224KAC4#
10ꢀ GRM188R61H474KA12#
0.9mm 50Vdc X5R 0.47µF
1.0µF
20ꢀ GRM188R61H474MA12#
10ꢀ GRM188R61H105KAAL#
20ꢀ GRM188R61H105MAAL#
10ꢀ GRM188B11H221KA01#
20ꢀ GRM188B11H221MA01#
10ꢀ GRM188B11H331KA01#
20ꢀ GRM188B11H331MA01#
10ꢀ GRM188B11H471KA01#
20ꢀ GRM188B11H471MA01#
10ꢀ GRM188B11H681KA01#
20ꢀ GRM188B11H681MA01#
10ꢀ GRM188B11H102KA01#
20ꢀ GRM188B11H102MA01#
10ꢀ GRM188B11H152KA01#
20ꢀ GRM188B11H152MA01#
10ꢀ GRM188B11H222KA01#
20ꢀ GRM188B11H222MA01#
10ꢀ GRM188B11H332KA01#
20ꢀ GRM188B11H332MA01#
10ꢀ GRM188B11H472KA01#
20ꢀ GRM188B11H472MA01#
10ꢀ GRM188B11H682KA01#
20ꢀ GRM188B11H682MA01#
10ꢀ GRM188B11H103KA01#
20ꢀ GRM188B11H103MA01#
10ꢀ GRM188B11H153KA01#
20ꢀ GRM188B11H153MA01#
10ꢀ GRM188B11H223KA01#
20ꢀ GRM188B11H223MA01#
10ꢀ GRM188B11H333KA61#
20ꢀ GRM188B11H333MA61#
10ꢀ GRM188B11H473KA61#
20ꢀ GRM188B11H473MA61#
10ꢀ GRM188B31H683KA92#
20ꢀ GRM188B31H683MA92#
10ꢀ GRM188B31H104KA92#
20ꢀ GRM188B31H104MA92#
10ꢀ GRM188B31H154KAC4#
20ꢀ GRM188B31H154MAC4#
10ꢀ GRM188B31H224KAC4#
20ꢀ GRM188B31H224MAC4#
10ꢀ GRM188B31H105KAAL#
20ꢀ GRM188B31H105MAAL#
10ꢀ GRM188R71E153KA01#
10ꢀ GRM188R71E223KA01#
20ꢀ GRM188R71E223MA01#
10ꢀ GRM188R71E333KA01#
10ꢀ GRM188R71E473KA01#
10ꢀ GRM188R71E683KA01#
10ꢀ GRM188R71E154KA01#
10ꢀ GRM188R71E224KA88#
10ꢀ GRM188R71E474KA12#
10ꢀ GRM188R71E105KA12#
20ꢀ GRM188R71E105MA12#
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
B
220pF
330pF
470pF
680pF
22000pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.1µF
0.1µF
50Vdc X7R 220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.1µF
R
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
68000pF
0.1µF
0.15µF
0.22µF
1.0µF
25Vdc X7R 15000pF
22000pF
33000pF
47000pF
68000pF
0.15µF
0.22µF
0.47µF
1.0µF
X5R 1000pF
2200pF
4700pF
10000pF
22000pF
0.22µF
0.47µF
Part number # indicates the package specification code.
70
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 25Vdc
R
15000pF
22000pF
10ꢀ GRM188R11E153KA01#
10ꢀ GRM188R11E223KA01#
20ꢀ GRM188R11E223MA01#
10ꢀ GRM188R11E333KA01#
10ꢀ GRM188R11E473KA01#
10ꢀ GRM188R11E683KA01#
10ꢀ GRM188R11E154KA01#
10ꢀ GRM188R11E224KA88#
10ꢀ GRM188C81E105KAAD#
20ꢀ GRM188C81E105MAAD#
10ꢀ GRM188R61E104KA01#
10ꢀ GRM188R61E224KA88#
10ꢀ GRM188R61E474KA12#
20ꢀ GRM188R61E474MA12#
10ꢀ GRM188R61E684KA75#
20ꢀ GRM188R61E684MA75#
10ꢀ GRM188R61E105KA12#
20ꢀ GRM188R61E105MA12#
10ꢀ GRM188R61E225KA12#
20ꢀ GRM188R61E225MA12#
10ꢀ GRM188B11E222KA01#
10ꢀ GRM188B11E332KA01#
10ꢀ GRM188B11E472KA01#
10ꢀ GRM188B11E682KA01#
10ꢀ GRM188B11E103KA01#
20ꢀ GRM188B11E103MA01#
10ꢀ GRM188B11E153KA01#
20ꢀ GRM188B11E153MA01#
10ꢀ GRM188B11E223KA01#
20ꢀ GRM188B11E223MA01#
10ꢀ GRM188B11E333KA01#
20ꢀ GRM188B11E333MA01#
10ꢀ GRM188B11E473KA01#
20ꢀ GRM188B11E473MA01#
10ꢀ GRM188B11E683KA01#
20ꢀ GRM188B11E683MA01#
10ꢀ GRM188B11E104KA01#
20ꢀ GRM188B11E104MA01#
10ꢀ GRM188B11E154KA01#
10ꢀ GRM188B31E224KA87#
10ꢀ GRM188B31E474KA75#
20ꢀ GRM188B31E474MA75#
10ꢀ GRM188B31E684KA75#
20ꢀ GRM188B31E684MA75#
10ꢀ GRM188B31E105KA75#
20ꢀ GRM188B31E105MA75#
10ꢀ GRM188B31E225KA12#
20ꢀ GRM188B31E225MA12#
10ꢀ GRM188R71C154KA01#
10ꢀ GRM188R71C224KA01#
10ꢀ GRM188R71C334KA01#
10ꢀ GRM188R71C474KA88#
10ꢀ GRM188R71C105KA12#
10ꢀ GRM188R71C105KE15#
0.9mm 16Vdc X7R 1.0µF
20ꢀ GRM188R71C105MA12#
20ꢀ GRM188R71C105ME15#
10ꢀ GRM188C71C684KA12#
10ꢀ GRM188R11C154KA01#
10ꢀ GRM188R11C224KA01#
10ꢀ GRM188R11C334KA01#
10ꢀ GRM188R11C474KA88#
10ꢀ GRM188C81C105KA12#
20ꢀ GRM188C81C105MA12#
10ꢀ GRM188C81C225KA12#
20ꢀ GRM188C81C225MA12#
10ꢀ GRM188R61C224KA88#
10ꢀ GRM188R61C684KA75#
20ꢀ GRM188R61C684MA75#
10ꢀ GRM188R61C105KA93#
10ꢀ GRM188R61C225KE15#
10ꢀ GRM188B11C154KA01#
10ꢀ GRM188B11C224KA01#
10ꢀ GRM188B11C334KA01#
20ꢀ GRM188B11C334MA01#
10ꢀ GRM188B31C684KA75#
20ꢀ GRM188B31C684MA75#
10ꢀ GRM188B31C105KA92#
20ꢀ GRM188B31C105MA92#
10ꢀ GRM188B31C225KE14#
10ꢀ GRM188R71A334KA61#
20ꢀ GRM188R71A334MA61#
10ꢀ GRM188R71A474KA61#
10ꢀ GRM188R71A684KA61#
20ꢀ GRM188R71A684MA61#
10ꢀ GRM188R71A225KE15#
20ꢀ GRM188R71A225ME15#
10ꢀ GRM188D71A225KE34#
20ꢀ GRM188D71A225ME34#
10ꢀ GRM188C81A225KE34#
20ꢀ GRM188C81A225ME34#
10ꢀ GRM188R61A334KA61#
20ꢀ GRM188R61A334MA61#
10ꢀ GRM188R61A684KA61#
20ꢀ GRM188R61A684MA61#
10ꢀ GRM188R61A225KE34#
20ꢀ GRM188R61A225ME34#
10ꢀ GRM188B11A334KA61#
20ꢀ GRM188B11A334MA61#
10ꢀ GRM188B11A684KA61#
20ꢀ GRM188B11A684MA61#
10ꢀ GRM188B31A225KE33#
20ꢀ GRM188B31A225ME33#
10ꢀ GRM188R70J105KA01#
20ꢀ GRM188R70J105MA01#
10ꢀ GRM188C70J225KE20#
20ꢀ GRM188C70J225ME20#
10ꢀ GRM188C80J225KE19#
20ꢀ GRM188C80J225ME19#
X7S 0.68µF
33000pF
47000pF
68000pF
0.15µF
R
0.15µF
0.22µF
0.33µF
0.47µF
1.0µF
0.22µF
X6S
X6S
1.0µF
2.2µF
X5R 0.1µF
0.22µF
X5R 0.22µF
0.68µF
0.47µF
0.68µF
1.0µF
2.2µF
1.0µF
2.2µF
B
0.15µF
0.22µF
0.33µF
B
2200pF
3300pF
4700pF
6800pF
10000pF
0.68µF
1.0µF
2.2µF
10Vdc X7R 0.33µF
15000pF
22000pF
33000pF
47000pF
68000pF
0.1µF
0.47µF
0.68µF
2.2µF
X7T
X6S
2.2µF
2.2µF
X5R 0.33µF
0.68µF
0.15µF
0.22µF
0.47µF
2.2µF
0.68µF
1.0µF
2.2µF
B
0.33µF
0.68µF
2.2µF
16Vdc X7R 0.15µF
6.3Vdc X7R 1.0µF
0.22µF
0.33µF
0.47µF
1.0µF
X7S
X6S
2.2µF
2.2µF
Part number # indicates the package specification code.
71
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.±,ꢁ0±ꢁ
GRM Series High Dielectric Constant Type Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
Derating
Derating
0.9mm 6.3Vdc X6S
4.7µF
±±0ꢀ GRM188C80J475KE15#
±ꢁ0ꢀ GRM188C80J475ME15#
±ꢁ0ꢀ GRM188R60J106ME47#
±ꢁ0ꢀ GRM188B30J106ME47#
±±0ꢀ GRM188C80G475KE19#
±ꢁ0ꢀ GRM188C80G475ME19#
±ꢁ0ꢀ GRM188C80G106ME47#
±ꢁ0ꢀ GRM188R60G106ME47#
±ꢁ0ꢀ GRM188B30G106ME46#
±ꢁ0ꢀ GRM188C80E106ME47#
±±0ꢀ GRM188R61E475KE11#
±±0ꢀ GRM188R61C475KAAJ#
±ꢁ0ꢀ GRM188R61C475MAAJ#
±±0ꢀ GRM188B31C475KAAJ#
±ꢁ0ꢀ GRM188B31C475MAAJ#
±ꢁ0ꢀ GRM188B31A106ME69#
±±0ꢀ GRM188R6YA475KE15#
±ꢁ0ꢀ GRM188R6YA475ME15#
±±0ꢀ GRM188R61E475KE15#
±ꢁ0ꢀ GRM188R61E475ME15#
±ꢁ0ꢀ GRM188R61E106MA73#
±ꢁ0ꢀ GRM188C81C106MA73#
±ꢁ0ꢀ GRM188R61C106MA73#
±ꢁ0ꢀ GRM188D71A106MA73#
±ꢁ0ꢀ GRM188C81A106MA73#
±ꢁ0ꢀ GRM188D70J106MA73#
±ꢁ0ꢀ GRM188R60J226MEA0#
±ꢁ0ꢀ GRM188B30J226MEA0#
±ꢁ0ꢀ GRM188C80G226MEA0#
±ꢁ0ꢀ GRM188R60G226MEA0#
±ꢁ0ꢀ GRM188B30G226MEA0#
0.95mm 50Vdc
B
0.33µF
±.0µF
±ꢁ0ꢀ GRM219B31H334MA87#
±±0ꢀ GRM219B31H105KA73#
±ꢁ0ꢀ GRM219B31H105MA73#
±±0ꢀ GRM219B31H225KE15#
±ꢁ0ꢀ GRM219B31H225ME15#
±±0ꢀ GRM219C8YA225KE15#
±ꢁ0ꢀ GRM219C8YA225ME15#
±±0ꢀ GRM219R6YA475KA73#
±ꢁ0ꢀ GRM219R6YA475MA73#
X5R
B
±0µF
±0µF
4.7µF
ꢁ.ꢁµF
ꢁ.ꢁµF
4Vdc X6S
35Vdc X6S
Derating
±0µF
±0µF
±0µF
±0µF
Derating
X5R
B
X5R 4.7µF
Derating
ꢁ.5Vdc X6S
ꢁ5Vdc X7R 68000pF ±±0ꢀ GRM219R71E683KA01#
0.95mm ꢁ5Vdc X5R 4.7µF
±6Vdc X5R 4.7µF
0.±µF
±±0ꢀ GRM219R71E104KA01#
±ꢁ0ꢀ GRM219R71E104MA01#
±±0ꢀ GRM219R71E684KA88#
±±0ꢀ GRM219R71E105KA88#
Derating
Derating
Derating
Derating
Derating
0.68µF
±.0µF
B
4.7µF
R
68000pF ±±0ꢀ GRM219R11E683KA01#
ꢁ.ꢁµF
±0Vdc
B
±0µF
X6S
±±0ꢀ GRM219C81E225KE15#
±ꢁ0ꢀ GRM219C81E225ME15#
±±0ꢀ GRM219R61E225KA12#
±ꢁ0ꢀ GRM219R61E225MA12#
±±0ꢀ GRM219R61E475KA73#
±ꢁ0ꢀ GRM219R61E475MA73#
±±0ꢀ GRM219R61E106KA12#
±ꢁ0ꢀ GRM219R61E106MA12#
±±0ꢀ GRM219B31E474KA88#
±±0ꢀ GRM219B31E684KA88#
±±0ꢀ GRM219B31E105KA88#
±±0ꢀ GRM219B31E225KA75#
±ꢁ0ꢀ GRM219B31E225MA75#
±±0ꢀ GRM219B31E106KA12#
±ꢁ0ꢀ GRM219B31E106MA12#
±±0ꢀ GRM219R71C334KA88#
±±0ꢀ GRM219R71C684KA01#
±±0ꢀ GRM219R71C225KE15#
±ꢁ0ꢀ GRM219R71C225ME15#
±±0ꢀ GRM219R11C684KA01#
±±0ꢀ GRM219C81C475KA73#
±ꢁ0ꢀ GRM219C81C475MA73#
±±0ꢀ GRM219R61C475KE15#
±±0ꢀ GRM219R61C106KA73#
±ꢁ0ꢀ GRM219R61C106MA73#
±±0ꢀ GRM219B11C684KA01#
±±0ꢀ GRM219B31C475KE15#
±±0ꢀ GRM219B31C106KA73#
±ꢁ0ꢀ GRM219B31C106MA73#
±±0ꢀ GRM219R71A225KE15#
±ꢁ0ꢀ GRM219R71A225ME15#
±±0ꢀ GRM219D71A475KE15#
±ꢁ0ꢀ GRM219D71A475ME15#
±ꢁ0ꢀ GRM219R61A226MEA0#
±ꢁ0ꢀ GRM219B31A226MEA0#
±±0ꢀ GRM219C80J106KE39#
±ꢁ0ꢀ GRM219C80J106ME39#
±ꢁ0ꢀ GRM219R60J226ME47#
±ꢁ0ꢀ GRM219B30J226ME47#
±mm
35Vdc X5R 4.7µF
ꢁ5Vdc X5R 4.7µF
±0µF
X5R ꢁ.ꢁµF
4.7µF
Derating
Derating
±6Vdc X6S
±0µF
±0µF
±0µF
±0µF
±0µF
ꢁꢁµF
ꢁꢁµF
ꢁꢁµF
ꢁꢁµF
ꢁꢁµF
±0µF
X5R
±0Vdc X7T
B
0.47µF
0.68µF
±.0µF
X6S
6.3Vdc X7T
Derating
Derating
Derating
X5R
ꢁ.ꢁµF
B
4Vdc X6S
X5R
Derating
Derating
±0µF
B
±6Vdc X7R 0.33µF
0.68µF
ꢁ.ꢁµF
2.0×1.25mm
c
R
0.68µF
4.7µF
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
X6S
0.7mm ꢁ5Vdc X5R ±.0µF
±6Vdc X6S ±.0µF
0.95mm ±00Vdc X7R 6800pF
±±0ꢀ GRM216R61E105KA12#
±±0ꢀ GRM216C81C105KA12#
±±0ꢀ GRM219R72A682KA01#
X5R 4.7µF
±0µF
±0000pF ±±0ꢀ GRM219R72A103KA01#
±ꢁ0ꢀ GRM219R72A103MA01#
B
0.68µF
4.7µF
±0µF
50Vdc X7R ±0000pF ±±0ꢀ GRM219R71H103KA01#
±ꢁ0ꢀ GRM219R71H103MA01#
±5000pF ±±0ꢀ GRM219R71H153KA01#
±ꢁ0ꢀ GRM219R71H153MA01#
±0Vdc X7R ꢁ.ꢁµF
33000pF ±±0ꢀ GRM219R71H333KA01#
Derating
Derating
Derating
Derating
0.33µF
±±0ꢀ GRM219R71H334KA88#
X7T
4.7µF
R
33000pF ±±0ꢀ GRM219R11H333KA01#
X5R ±.0µF
±±0ꢀ GRM219R61H105KA73#
±ꢁ0ꢀ GRM219R61H105MA73#
±±0ꢀ GRM219R61H225KE15#
±ꢁ0ꢀ GRM219R61H225ME15#
X5R
B
ꢁꢁµF
ꢁꢁµF
±0µF
ꢁ.ꢁµF
6.3Vdc X6S
Derating
Derating
B
33000pF ±±0ꢀ GRM219B11H333KA01#
0.33µF ±±0ꢀ GRM219B31H334KA87#
X5R
B
ꢁꢁµF
ꢁꢁµF
Part number # indicates the package specification code.
7ꢁ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
GRM Series High Dielectric Constant Type Part Number List
→
(
2.0×1.25mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.95mm 4Vdc X6S
10µF
±10ꢀ GRM219C80G106KE19#
±±0ꢀ GRM219C80G106ME19#
±±0ꢀ GRM219R60G476ME44#
±10ꢀ GRM21AR72A224KAC5#
±10ꢀ GRM21AR72A334KAC5#
1.35mm ±5Vdc X5R 4.7µF
±±0ꢀ GRM21BR61E475MA12#
±10ꢀ GRM21BB11E154KA01#
±10ꢀ GRM21BB11E224KA01#
±10ꢀ GRM21BB11E334KA01#
±10ꢀ GRM21BB31E225KA75#
±±0ꢀ GRM21BB31E225MA75#
±10ꢀ GRM21BB31E475KA75#
±±0ꢀ GRM21BB31E475MA75#
±10ꢀ GRM21BR71C225KA12#
±±0ꢀ GRM21BR71C225MA12#
±10ꢀ GRM21BC81C475KA88#
±10ꢀ GRM21BR61C225KA88#
±10ꢀ GRM21BR61C475KA88#
±10ꢀ GRM21BR61C106KE15#
±±0ꢀ GRM21BR61C106ME15#
±10ꢀ GRM21BB31C225KA87#
±10ꢀ GRM21BB31C475KA87#
±10ꢀ GRM21BB31C106KE15#
±±0ꢀ GRM21BB31C106ME15#
±10ꢀ GRM21BC81A106KE18#
±±0ꢀ GRM21BC81A106ME18#
±10ꢀ GRM21BC80J106KE19#
±±0ꢀ GRM21BC80J106ME19#
±10ꢀ GRM21BR72A474KA73#
±10ꢀ GRM21BR61H225KA73#
±±0ꢀ GRM21BR61H225MA73#
±10ꢀ GRM21BR61H475KE51#
±±0ꢀ GRM21BR61H475ME51#
±10ꢀ GRM21BB31H225KA73#
±±0ꢀ GRM21BB31H225MA73#
±10ꢀ GRM21BB31H475KE51#
±±0ꢀ GRM21BB31H475ME51#
±10ꢀ GRM21BR71E105KA99#
±10ꢀ GRM21BR71E225KA73#
±10ꢀ GRM21BR11E105KA99#
±10ꢀ GRM21BR61E106KA73#
±±0ꢀ GRM21BR61E106MA73#
±10ꢀ GRM21BB31E105KA98#
±10ꢀ GRM21BB31E106KA73#
±±0ꢀ GRM21BB31E106MA73#
±10ꢀ GRM21BR71C475KA73#
±±0ꢀ GRM21BR71C475MA73#
±10ꢀ GRM21BC81C106KA73#
±±0ꢀ GRM21BC81C106MA73#
±10ꢀ GRM21BR71A475KA73#
±±0ꢀ GRM21BR71A475MA73#
±10ꢀ GRM21BR71A106KE51#
±±0ꢀ GRM21BR71A106ME51#
±±0ꢀ GRM21BB31A226ME51#
±10ꢀ GRM21BR70J106KE76#
±±0ꢀ GRM21BR70J106ME76#
±±0ꢀ GRM21BC80J226ME51#
±±0ꢀ GRM21BR60J226ME39#
±±0ꢀ GRM21BB30J226ME38#
B
0.15µF
0.±±µF
0.33µF
±.±µF
Derating
X5R
47µF
1mm 100Vdc X7R 0.±±µF
0.33µF
50Vdc X7R ±±000pF ±10ꢀ GRM219R71H223KA17#
±±0ꢀ GRM219R71H223MA17#
4.7µF
1.35mm 100Vdc X7R 10000pF ±10ꢀ GRM21BR72A103KA01#
15000pF ±10ꢀ GRM21BR72A153KA01#
±±000pF ±10ꢀ GRM21BR72A223KA01#
33000pF ±10ꢀ GRM21BR72A333KA01#
47000pF ±10ꢀ GRM21BR72A473KA01#
68000pF ±10ꢀ GRM21BR72A683KAC4#
±±0ꢀ GRM21BR72A683MAC4#
16Vdc X7R ±.±µF
X6S
4.7µF
X5R ±.±µF
4.7µF
10µF
0.1µF
±10ꢀ GRM21BR72A104KAC4#
±±0ꢀ GRM21BR72A104MAC4#
B
±.±µF
4.7µF
10µF
50Vdc X7R 47000pF ±10ꢀ GRM21BR71H473KA01#
68000pF ±10ꢀ GRM21BR71H683KA01#
0.1µF
±10ꢀ GRM21BR71H104KA01#
±±0ꢀ GRM21BR71H104MA01#
±10ꢀ GRM21BR71H154KA01#
±10ꢀ GRM21BR71H224KA01#
±10ꢀ GRM21BR71H474KA88#
±10ꢀ GRM21BR71H105KA12#
10Vdc X6S
6.3Vdc X6S
10µF
10µF
0.15µF
0.±±µF
0.47µF
1.0µF
1.4mm 100Vdc X7R 0.47µF
50Vdc X5R ±.±µF
R
47000pF ±10ꢀ GRM21BR11H473KA01#
68000pF ±10ꢀ GRM21BR11H683KA01#
0.1µF
±10ꢀ GRM21BR11H104KA01#
±±0ꢀ GRM21BR11H104MA01#
±10ꢀ GRM21BR61H105KA12#
4.7µF
X5R 1.0µF
B
±.±µF
4.7µF
B
47000pF ±10ꢀ GRM21BB11H473KA01#
68000pF ±10ꢀ GRM21BB11H683KA01#
0.1µF
0.15µF
0.±±µF
0.47µF
0.68µF
1.0µF
±10ꢀ GRM21BB11H104KA01#
±±0ꢀ GRM21BB11H104MA01#
±10ꢀ GRM21BB31H154KA88#
±±0ꢀ GRM21BB31H154MA88#
±10ꢀ GRM21BB31H224KA88#
±±0ꢀ GRM21BB31H224MA88#
±10ꢀ GRM21BB31H474KA87#
±±0ꢀ GRM21BB31H474MA87#
±10ꢀ GRM21BB31H684KAC4#
±±0ꢀ GRM21BB31H684MAC4#
±10ꢀ GRM21BB31H105KA12#
±±0ꢀ GRM21BB31H105MA12#
±10ꢀ GRM21BR71E104KA01#
±10ꢀ GRM21BR71E154KA01#
±10ꢀ GRM21BR11E104KA01#
±10ꢀ GRM21BR11E154KA01#
±±0ꢀ GRM21BR11E154MA01#
±10ꢀ GRM21BR11E684KA88#
±10ꢀ GRM21BC81E475KA12#
±±0ꢀ GRM21BC81E475MA12#
±10ꢀ GRM21BR61E225KA12#
±±0ꢀ GRM21BR61E225MA12#
±10ꢀ GRM21BR61E475KA12#
±5Vdc X7R 1.0µF
±.±µF
R
1.0µF
10µF
X5R
B
1.0µF
10µF
16Vdc X7R 4.7µF
X6S
10µF
±5Vdc X7R 0.1µF
0.15µF
10Vdc X7R 4.7µF
10µF
R
0.1µF
0.15µF
Derating
0.68µF
4.7µF
B
±±µF
10µF
X6S
6.3Vdc X7R
Derating
X5R ±.±µF
4.7µF
X6S
X5R
B
±±µF
±±µF
±±µF
Part number # indicates the package specification code.
73
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
Cꢀ2E.pdf
Oct.1,2ꢀ12
GRM Series High Dielectric Constant Type Part Number List
→
(
2.0×1.25mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
1.4mm 4Vdc X7U
X6S
22µF
22µF
22µF
47µF
47µF
47µF
47µF
47µF
2ꢀ0 GRM21BE70G226ME51#
2ꢀ0 GRM21BC80G226ME39#
2ꢀ0 GRM21BR61E226ME44#
2ꢀ0 GRM21BR60J476ME15#
2ꢀ0 GRM21BB30J476ME15#
2ꢀ0 GRM21BC80G476ME15#
2ꢀ0 GRM21BR60G476ME15#
2ꢀ0 GRM21BB30G476ME15#
1.25mm 16Vdc X6S
B
1ꢀµF
1ꢀ0 GRM31MC81C106KA12#
1ꢀ0 GRM31MB11C684KA01#
1ꢀ0 GRM31MR72A474KA35#
2ꢀ0 GRM31MR72A474MA35#
1ꢀ0 GRM31MR72A684KA35#
1ꢀ0 GRM31MB31E225KA92#
1ꢀ0 GRM31CR72A105KA01#
1ꢀ0 GRM31CR71H225KA88#
1ꢀ0 GRM31CR71H475KA12#
1ꢀ0 GRM31CR61H225KA88#
1ꢀ0 GRM31CB31H225KA87#
2ꢀ0 GRM31CB31H225MA87#
1ꢀ0 GRM31CB31H475KA12#
2ꢀ0 GRM31CB31H475MA12#
1ꢀ0 GRM31CR71E475KA88#
1ꢀ0 GRM31CR71E106KA12#
2ꢀ0 GRM31CR71E106MA12#
1ꢀ0 GRM31CC81E106KE15#
2ꢀ0 GRM31CC81E106MA12#
1ꢀ0 GRM31CR61E106KA12#
2ꢀ0 GRM31CR61E226ME15#
1ꢀ0 GRM31CB31E106KA75#
2ꢀ0 GRM31CB31E226ME15#
2ꢀ0 GRM31CR71C475MA01#
1ꢀ0 GRM31CR71C106KAC7#
2ꢀ0 GRM31CR71C106MAC7#
2ꢀ0 GRM31CR11C475MA01#
2ꢀ0 GRM31CC81C226ME15#
1ꢀ0 GRM31CR61C106KA88#
2ꢀ0 GRM31CR61C226ME15#
1ꢀ0 GRM31CB31C106KA88#
2ꢀ0 GRM31CB31C226ME15#
2ꢀ0 GRM31CR71A226ME15#
2ꢀ0 GRM31CC81A226ME19#
2ꢀ0 GRM31CR61A226ME19#
2ꢀ0 GRM31CR61A476ME15#
2ꢀ0 GRM31CB31A226ME19#
2ꢀ0 GRM31CB31A476ME15#
2ꢀ0 GRM31CR70J226ME19#
2ꢀ0 GRM31CE70J476ME15#
2ꢀ0 GRM31CC80J226ME19#
2ꢀ0 GRM31CC80J476ME18#
2ꢀ0 GRM31CR60J476ME19#
2ꢀ0 GRM31CB30J476ME18#
2ꢀ0 GRM31CE70G476ME15#
2ꢀ0 GRM31CC80G476ME19#
1ꢀ0 GRM31CR72A225KA73#
2ꢀ0 GRM31CR72A225MA73#
2ꢀ0 GRM31CD80J107ME39#
2ꢀ0 GRM31CR60J107ME39#
2ꢀ0 GRM31CE70G107ME39#
2ꢀ0 GRM31CD80G107ME39#
2ꢀ0 GRM31CR60G107ME39#
ꢀ.68µF
1.45mm 25Vdc X5R
1.3mm 1ꢀꢀVdc X7R ꢀ.47µF
Derating
Derating
Derating
6.3Vdc X5R
B
4Vdc X6S
X5R
ꢀ.68µF
25Vdc
B
2.2µF
1.8mm 1ꢀꢀVdc X7R 1.ꢀµF
5ꢀVdc X7R 2.2µF
4.7µF
B
X5R 2.2µF
3.2×1.6mm
c
B
2.2µF
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
4.7µF
ꢀ.7mm 25Vdc X5R 2.2µF
1ꢀ0 GRM316R61E225KA12#
1ꢀ0 GRM316B31E225KA75#
1ꢀ0 GRM316C81C225KA12#
1ꢀ0 GRM319R72A153KA01#
1ꢀ0 GRM319R72A104KA01#
1ꢀ0 GRM319R71H334KA01#
1ꢀ0 GRM319R6YA106KA12#
2ꢀ0 GRM319R6YA106MA12#
1ꢀ0 GRM319R71E334KA01#
1ꢀ0 GRM319R11E334KA01#
1ꢀ0 GRM319B11E334KA01#
1ꢀ0 GRM319B11E684KA01#
1ꢀ0 GRM319C81C475KA12#
1ꢀ0 GRM319R61C106KE15#
2ꢀ0 GRM319R61C106ME15#
1ꢀ0 GRM319B11C474KA01#
1ꢀ0 GRM319B31C106KE15#
2ꢀ0 GRM319B31C106ME15#
2ꢀ0 GRM319R61A226ME15#
2ꢀ0 GRM319B31A226ME15#
2ꢀ0 GRM319C80J226ME15#
2ꢀ0 GRM319R60J226ME15#
2ꢀ0 GRM319B30J226ME15#
1ꢀ0 GRM31MR72A223KA01#
1ꢀ0 GRM31MR72A333KA01#
1ꢀ0 GRM31MR72A473KA01#
1ꢀ0 GRM31MR72A683KA01#
1ꢀ0 GRM31MR72A154KA01#
1ꢀ0 GRM31MR72A224KA01#
1ꢀ0 GRM31MR71H154KA01#
1ꢀ0 GRM31MR71H224KA01#
1ꢀ0 GRM31MR71H474KA01#
1ꢀ0 GRM31MR71H684KA88#
1ꢀ0 GRM31MR71H105KA88#
1ꢀ0 GRM31MR11H154KA01#
1ꢀ0 GRM31MR11H224KA01#
1ꢀ0 GRM31MB11H154KA01#
1ꢀ0 GRM31MB11H224KA01#
1ꢀ0 GRM31MB31H105KA87#
2ꢀ0 GRM31MR61E106MA12#
1ꢀ0 GRM31MB11E224KA01#
B
2.2µF
2.2µF
25Vdc X7R 4.7µF
1ꢀµF
16Vdc X6S
ꢀ.95mm 1ꢀꢀVdc X7R 15ꢀꢀꢀpF
ꢀ.1µF
X6S
X5R
B
1ꢀµF
5ꢀVdc X7R ꢀ.33µF
Derating
Derating
35Vdc X5R
1ꢀµF
1ꢀµF
22µF
1ꢀµF
22µF
25Vdc X7R ꢀ.33µF
R
B
ꢀ.33µF
ꢀ.33µF
ꢀ.68µF
4.7µF
16Vdc X7R 4.7µF
1ꢀµF
16Vdc X6S
X5R
1ꢀµF
R
4.7µF
22µF
1ꢀµF
22µF
1ꢀµF
22µF
22µF
22µF
22µF
47µF
22µF
47µF
22µF
47µF
22µF
47µF
47µF
47µF
47µF
47µF
X6S
X5R
B
ꢀ.47µF
1ꢀµF
B
1ꢀVdc X5R
22µF
22µF
22µF
22µF
22µF
B
6.3Vdc X6S
X5R
1ꢀVdc X7R
X6S
X5R
B
1.25mm 1ꢀꢀVdc X7R 22ꢀꢀꢀpF
B
33ꢀꢀꢀpF
47ꢀꢀꢀpF
6.3Vdc X7R
X7U
Derating
68ꢀꢀꢀpF
ꢀ.15µF
X6S
ꢀ.22µF
5ꢀVdc X7R ꢀ.15µF
ꢀ.22µF
X5R
B
ꢀ.47µF
4Vdc X7U
X6S
ꢀ.68µF
1.ꢀµF
1.9mm 1ꢀꢀVdc X7R 2.2µF
R
B
ꢀ.15µF
ꢀ.22µF
ꢀ.15µF
ꢀ.22µF
1.ꢀµF
Derating
Derating
6.3Vdc X6T 1ꢀꢀµF
X5R 1ꢀꢀµF
4Vdc X7U 1ꢀꢀµF
X6T 1ꢀꢀµF
25Vdc X5R
B
1ꢀµF
X5R 1ꢀꢀµF
ꢀ.22µF
Part number # indicates the package specification code.
74
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
GRM Series High Dielectric Constant Type Part Number List
3.2×2.5mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
Derating
Derating
1mm 6.3Vdc X5S 150µF
4Vdc X6T 150µF
±±0ꢀ GRM32RC60J157ME15#
±±0ꢀ GRM32RD80G157ME15#
±±0ꢀ GRM32RC60G157ME15#
±±0ꢀ GRM32RD80E157ME15#
±10ꢀ GRM32NR71H684KA01#
±10ꢀ GRM32NB11H684KA01#
±±0ꢀ GRM32NC81A226ME19#
±10ꢀ GRM32CR72A684KA01#
±10ꢀ GRM32CR72A105KA35#
±10ꢀ GRM32DR71E106KA12#
±10ꢀ GRM32DC81E106KA12#
±10ꢀ GRM32ER72A225KA35#
±±0ꢀ GRM32ER72A225MA35#
±10ꢀ GRM32ER71H475KA88#
±10ꢀ GRM32ER71H106KA12#
±10ꢀ GRM32ER61H106KA12#
±±0ꢀ GRM32ER61H106MA12#
±10ꢀ GRM32EB31H475KA87#
±10ꢀ GRM32EB31H106KA12#
±±0ꢀ GRM32EB31H106MA12#
±10ꢀ GRM32ER7YA106KA12#
±10ꢀ GRM32ER6YA106KA12#
±10ꢀ GRM32EB3YA106KA12#
±±0ꢀ GRM32ER71E226ME15#
±±0ꢀ GRM32EC81E226ME15#
±±0ꢀ GRM32ER61E226ME15#
±±0ꢀ GRM32EB31E226ME15#
±±0ꢀ GRM32ER71C226MEA8#
±±0ꢀ GRM32EC81C476ME15#
±±0ꢀ GRM32ER61C476ME15#
±±0ꢀ GRM32EB31C226ME16#
±±0ꢀ GRM32EB31C476ME15#
±±0ꢀ GRM32ER71A476ME15#
±±0ꢀ GRM32EC81A476ME19#
±±0ꢀ GRM32ER61A476ME20#
±±0ꢀ GRM32EB31A476ME20#
±±0ꢀ GRM32ER70J476ME20#
±±0ꢀ GRM32EE70J107ME15#
±±0ꢀ GRM32EC80J476ME64#
±±0ꢀ GRM32EC80J107ME20#
±±0ꢀ GRM32ER60J107ME20#
±±0ꢀ GRM32EB30J107ME16#
±±0ꢀ GRM32EE70G107ME19#
±±0ꢀ GRM32EC80G107ME20#
X5S 150µF
±.5Vdc X6T 150µF
1.5mm 50Vdc X7R 0.68µF
B
0.68µF
±±µF
10Vdc X6S
1.8mm 100Vdc X7R 0.68µF
1.0µF
±.±mm ±5Vdc X7R
X6S
10µF
10µF
±.7mm 100Vdc X7R ±.±µF
50Vdc X7R 4.7µF
10µF
X5R
10µF
B
4.7µF
10µF
35Vdc X7R
10µF
10µF
10µF
±±µF
±±µF
±±µF
±±µF
±±µF
47µF
47µF
±±µF
47µF
47µF
47µF
47µF
47µF
47µF
X5R
B
±5Vdc X7R
X6S
X5R
B
16Vdc X7R
Derating
X6S
X5R
B
10Vdc X7R
X6S
X5R
B
6.3Vdc X7R
Derating
X7U 100µF
X6S
47µF
100µF
X5R 100µF
100µF
B
4Vdc X7U 100µF
X6S 100µF
Part number # indicates the package specification code.
75
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Capacitor Array GNM Series
Ideal for reducing the mounting area and mounting costs.
P
P
1
2
3
4
T
T
1
2
7
3
6
4
5
W
W
8
7
6
5
L
8
L
2 Elements
4 Elements
1
2
3
4
The number of parts can be reduced.
Also contributes to the low profile of the set.
Ideal for decoupling and smoothing.
Reduction of environmental impact substances is possible.
(Accommodates 2 or 4 times the number of individual chips per reel.)
76
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
GNM Series High Dielectric Constant Type Part Number List
T
Rated
TC
Cap.
Tol.
Part Number
2 Elements 0.9×0.6mm
c
max. Voltage Code
0.7mm 16Vdc X5R 47000pF ±±0ꢀ GNM1M2R61C473MA01#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
B
±±000pF ±±0ꢀ GNM1M2B11C223MA01#
47000pF ±±0ꢀ GNM1M2B11C473MA01#
0.5mm 16Vdc X5R 10000pF ±±0ꢀ GNM0M2R61C103ME18#
±±000pF ±±0ꢀ GNM0M2R61C223ME18#
0.1µF
±±0ꢀ GNM1M2B11C104MA01#
47000pF ±±0ꢀ GNM0M2R61C473ME18#
10Vdc X7R ±±000pF ±±0ꢀ GNM1M2R71A223MA01#
47000pF ±±0ꢀ GNM1M2R71A473MA01#
0.1µF
±±0ꢀ GNM0M2R61C104ME18#
B
10000pF ±±0ꢀ GNM0M2B31C103ME18#
±±000pF ±±0ꢀ GNM0M2B31C223ME18#
47000pF ±±0ꢀ GNM0M2B31C473ME18#
R
±±000pF ±±0ꢀ GNM1M2R11A223MA01#
47000pF ±±0ꢀ GNM1M2R11A473MA01#
X5R ±±000pF ±±0ꢀ GNM1M2R61A223MA01#
47000pF ±±0ꢀ GNM1M2R61A473MA01#
0.1µF
±±0ꢀ GNM0M2B31C104ME18#
10Vdc X5R 10000pF ±±0ꢀ GNM0M2R61A103ME17#
±±000pF ±±0ꢀ GNM0M2R61A223ME17#
0.1µF
±±0ꢀ GNM1M2R61A104MA01#
B
±±000pF ±±0ꢀ GNM1M2B11A223MA01#
47000pF ±±0ꢀ GNM1M2B11A473MA01#
47000pF ±±0ꢀ GNM0M2R61A473ME17#
0.1µF
±±0ꢀ GNM0M2R61A104ME17#
0.1µF
±±0ꢀ GNM1M2B11A104MA01#
±±0ꢀ GNM1M2R61C224ME18#
±±0ꢀ GNM1M2R61C105ME18#
±±0ꢀ GNM1M2B31C105ME18#
±±0ꢀ GNM1M2R61A105ME17#
±±0ꢀ GNM1M2R61A225ME18#
±±0ꢀ GNM1M2B31A224ME17#
±±0ꢀ GNM1M2B31A474ME17#
±±0ꢀ GNM1M2B31A105ME17#
±±0ꢀ GNM1M2B31A225ME18#
±±0ꢀ GNM1M2R60J225ME18#
±±0ꢀ GNM1M2B30J225ME18#
B
10000pF ±±0ꢀ GNM0M2B31A103ME17#
±±000pF ±±0ꢀ GNM0M2B31A223ME17#
47000pF ±±0ꢀ GNM0M2B31A473ME17#
0.8mm 16Vdc X5R 0.±±µF
1.0µF
B
1.0µF
0.1µF
4Vdc X5R 1.0µF
1.0µF
±±0ꢀ GNM0M2B31A104ME17#
±±0ꢀ GNM0M2R60G105ME17#
±±0ꢀ GNM0M2B30G105ME17#
10Vdc X5R 1.0µF
±.±µF
B
B
0.±±µF
0.47µF
1.0µF
2 Elements 1.37×1.0mm
c
±.±µF
6.3Vdc X5R ±.±µF
±.±µF
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
B
0.55mm 16Vdc X7R 0.1µF
0.1µF
X5R 1.0µF
0.1µF
10Vdc X5R 1.0µF
1.0µF
0.7mm 50Vdc X7R 1000pF
1000pF
X5R 1000pF
1000pF
±±0ꢀ GNM1M2R71C104MAA1#
±±0ꢀ GNM1M2R11C104MAA1#
±±0ꢀ GNM1M2R61C105MEA2#
±±0ꢀ GNM1M2B11C104MAA1#
±±0ꢀ GNM1M2R61A105MEA4#
±±0ꢀ GNM1M2B31A105MEA4#
±±0ꢀ GNM1M2R71H102MA01#
±±0ꢀ GNM1M2R11H102MA01#
±±0ꢀ GNM1M2R61H102MA01#
±±0ꢀ GNM1M2B11H102MA01#
±±0ꢀ GNM1M2R71E222MA01#
±±0ꢀ GNM1M2R71E472MA01#
R
4 Elements 2.0×1.25mm
c
B
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
B
0.55mm 16Vdc X7R 0.1µF
±±0ꢀ GNM214R71C104MAA1#
±±0ꢀ GNM214R11C104MAA1#
±±0ꢀ GNM214B11C104MAA1#
±±0ꢀ GNM214R61A224MEA2#
±±0ꢀ GNM214R61A105MEA2#
±±0ꢀ GNM214B31A224MEA2#
±±0ꢀ GNM214B31A105MEA2#
±±0ꢀ GNM214R60J224MEA2#
±±0ꢀ GNM214R60J105MEA2#
±±0ꢀ GNM214B30J224MEA2#
±±0ꢀ GNM214B30J105MEA2#
±±0ꢀ GNM214R71H471MA01#
±±0ꢀ GNM214R71H102MA01#
±±0ꢀ GNM214R11H102MA01#
±±0ꢀ GNM214B11H471MA01#
±±0ꢀ GNM214B11H102MA01#
±±0ꢀ GNM214R71E222MA01#
±±0ꢀ GNM214R71E472MA01#
R
B
0.1µF
0.1µF
R
10Vdc X5R 0.±±µF
1.0µF
B
±5Vdc X7R ±±00pF
4700pF
B
0.±±µF
1.0µF
10000pF ±±0ꢀ GNM1M2R71E103MA01#
6.3Vdc X5R 0.±±µF
1.0µF
R
±±00pF
4700pF
±±0ꢀ GNM1M2R11E222MA01#
±±0ꢀ GNM1M2R11E472MA01#
B
0.±±µF
1.0µF
10000pF ±±0ꢀ GNM1M2R11E103MA01#
X5R ±±00pF
4700pF
±±0ꢀ GNM1M2R61E222MA01#
±±0ꢀ GNM1M2R61E472MA01#
0.7mm 50Vdc X7R 470pF
1000pF
10000pF ±±0ꢀ GNM1M2R61E103MA01#
R
B
1000pF
470pF
B
±±00pF
4700pF
±±0ꢀ GNM1M2B11E222MA01#
±±0ꢀ GNM1M2B11E472MA01#
1000pF
10000pF ±±0ꢀ GNM1M2B11E103MA01#
±5Vdc X7R ±±00pF
4700pF
16Vdc X7R ±±000pF ±±0ꢀ GNM1M2R71C223MA01#
47000pF ±±0ꢀ GNM1M2R71C473MA01#
10000pF ±±0ꢀ GNM214R71E103MA01#
0.1µF
±±0ꢀ GNM1M2R71C104MA01#
R
B
±±00pF
4700pF
±±0ꢀ GNM214R11E222MA01#
±±0ꢀ GNM214R11E472MA01#
R
±±000pF ±±0ꢀ GNM1M2R11C223MA01#
47000pF ±±0ꢀ GNM1M2R11C473MA01#
10000pF ±±0ꢀ GNM214R11E103MA01#
0.1µF
±±0ꢀ GNM1M2R11C104MA01#
±±00pF
4700pF
±±0ꢀ GNM214B11E222MA01#
±±0ꢀ GNM214B11E472MA01#
X5R ±±000pF ±±0ꢀ GNM1M2R61C223MA01#
Part number # indicates the package specification code.
77
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GNM Series High Dielectric Constant Type Part Number List
→
(
4 Elements 2.0×1.25mm)
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.7mm 25Vdc
B
10000pF
20ꢀ GNM214B11E103MA01#
20ꢀ GNM214R71C223MA01#
20ꢀ GNM214R71C473MA01#
20ꢀ GNM214R71C104MA01#
20ꢀ GNM214R11C223MA01#
20ꢀ GNM214R11C473MA01#
20ꢀ GNM214R11C104MA01#
20ꢀ GNM214B11C223MA01#
20ꢀ GNM214B11C473MA01#
20ꢀ GNM214B11C104MA01#
20ꢀ GNM214R61A105ME17#
20ꢀ GNM214B31A105ME17#
20ꢀ GNM214R60J105ME17#
20ꢀ GNM214B30J105ME17#
0.95mm 16Vdc X7R 22000pF
47000pF
0.1µF
R
B
22000pF
47000pF
0.1µF
22000pF
47000pF
0.1µF
10Vdc X5R 1.0µF
1.0µF
6.3Vdc X5R 1.0µF
1.0µF
B
B
Part number # indicates the package specification code.
78
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Low
ESL
Low ESL LLL/LLR/LLA/LLM Series
LLL Series Ideal decoupling solution for equipment having advanced features.
T
W
L
1
2
Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).
LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance
requirements.
LLR Series Low ESL capacitor that suppresses the anti-resonance in circuits.
T
W
L
1
2
3
Reduces the anti-resonance generated in the high-frequency range.
An optimal ESR value can be selected from four types, according to the characteristics of the circuit.
The low ESL type, is also ideal as a decoupling component.
LLA Series Ideal decoupling solution for equipment having advanced features.
P
1
2
3
4
T
1
2
3
4
5
6
7
8
W
8
7
6
5
L
1
2
Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).
LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance
requirements.
LLM Series Ideal decoupling solution for equipment having advanced features.
P
1
2
3
4
10
T
1
2
3
4
5
6
7
8
9
5
W
9
8
7
6
L
10
1
2
Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).
LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance
requirements.
79
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Low
ESL
LLL Series High Dielectric Constant Type
Part Number List
T
Rated
TC
Cap.
Tol.
Part Number
0.5×1.0mm
c
max. Voltage Code
0.5mm 4Vdc X7S
1.0µF
20ꢀ LLL215C70G105MA11#
20ꢀ LLL216R71H103MA01#
20ꢀ LLL216R71H223MA01#
20ꢀ LLL216R71E473MA01#
20ꢀ LLL216R71E104MA01#
20ꢀ LLL216R71A224MA01#
20ꢀ LLL219R71C224MA01#
20ꢀ LLL219R71A474MA01#
20ꢀ LLL219R71A105MA01#
20ꢀ LLL219C70G225MA01#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.7mm 50Vdc X7R 10000pF
22000pF
0.35mm 6.3Vdc X6S
0.1µF
20ꢀ LLL153C80J104ME01#
20ꢀ LLL153C80J224ME14#
20ꢀ LLL153C70G474ME17#
0.22µF
25Vdc X7R 47000pF
0.1µF
4Vdc X7S 0.47µF
10Vdc X7R 0.22µF
0.95mm 16Vdc X7R 0.22µF
10Vdc X7R 0.47µF
1.0µF
0.8×1.6mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
4Vdc X7S
2.2µF
0.5mm 25Vdc X7R 10000pF
16Vdc X7R 22000pF
47000pF
20ꢀ LLL185R71E103MA11#
20ꢀ LLL185R71C223MA11#
20ꢀ LLL185R71C473MA11#
20ꢀ LLL185R71A104MA11#
20ꢀ LLL185C70G224MA11#
20ꢀ LLL185C70G105ME01#
20ꢀ LLL185C70G225ME01#
20ꢀ LLL185R71H222MA01#
20ꢀ LLL185R71H472MA01#
20ꢀ LLL185R71E103MA01#
20ꢀ LLL185R71E223MA01#
20ꢀ LLL185R71C473MA01#
20ꢀ LLL185R71A104MA01#
20ꢀ LLL185R71A224MA01#
20ꢀ LLL185C70G474MA01#
1.6×3.2mm
c
10Vdc X7R 0.1µF
4Vdc X7S 0.22µF
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm 4Vdc X7S
1.0µF
2.2µF
0.5mm 50Vdc X7R 10000pF
22000pF
20ꢀ LLL315R71H103MA11#
20ꢀ LLL315R71H223MA11#
20ꢀ LLL315R71E473MA11#
20ꢀ LLL315R71E104MA11#
20ꢀ LLL315R71C224MA11#
20ꢀ LLL315R71A474MA11#
20ꢀ LLL317R71H103MA01#
20ꢀ LLL317R71H223MA01#
20ꢀ LLL317R71H473MA01#
20ꢀ LLL317R71E104MA01#
20ꢀ LLL317R71C224MA01#
20ꢀ LLL317R71C474MA01#
20ꢀ LLL317R71A105MA01#
20ꢀ LLL317R70J225MA01#
20ꢀ LLL31MR71H104MA01#
20ꢀ LLL31MR71E224MA01#
20ꢀ LLL31MR71E474MA01#
20ꢀ LLL31MR71C105MA01#
20ꢀ LLL31MR71A225MA01#
20ꢀ LLL31MR70J475MA01#
20ꢀ LLL31MR60J106ME01#
0.6mm 50Vdc X7R 2200pF
4700pF
25Vdc X7R 47000pF
0.1µF
25Vdc X7R 10000pF
22000pF
16Vdc X7R 0.22µF
10Vdc X7R 0.47µF
0.8mm 50Vdc X7R 10000pF
22000pF
16Vdc X7R 47000pF
10Vdc X7R 0.1µF
0.22µF
47000pF
4Vdc X7S 0.47µF
25Vdc X7R 0.1µF
16Vdc X7R 0.22µF
0.47µF
1.25×2.0mm
c
10Vdc X7R 1.0µF
6.3Vdc X7R 2.2µF
1.25mm 50Vdc X7R 0.1µF
25Vdc X7R 0.22µF
0.47µF
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.5mm 50Vdc X7R 10000pF
25Vdc X7R 22000pF
16Vdc X7R 47000pF
0.1µF
20ꢀ LLL215R71H103MA11#
20ꢀ LLL215R71E223MA11#
20ꢀ LLL215R71C473MA11#
20ꢀ LLL215R71C104MA11#
20ꢀ LLL215R71A224MA11#
20ꢀ LLL215R70J474MA11#
16Vdc X7R 1.0µF
10Vdc X7R 2.2µF
6.3Vdc X7R 4.7µF
10Vdc X7R 0.22µF
6.3Vdc X7R 0.47µF
X5R
10µF
Low
ESL
LLR Series High Dielectric Constant Type
Part Number List
0.8×1.6mm
c
T
Rated
TC
Cap.
Tol.
ESR
Part Number
max. Voltage Code
0.55mm 4Vdc X7S
1.0µF
20ꢀ
20ꢀ
20ꢀ
100mΩ LLR185C70G105ME01#
220mΩ LLR185C70G105ME03#
470mΩ LLR185C70G105ME05#
20ꢀ 1000mΩ LLR185C70G105ME07#
Part number # indicates the package specification code.
80
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
Low
ESL
LLA Series High Dielectric Constant Type
Part Number List
T
Rated
TC
Cap.
Tol.
Part Number
1.6×0.8mm
c
max. Voltage Code
0.95mm ±5Vdc X7R ±±000pF ±±0ꢀ LLA219R71E223MA01#
47000pF ±±0ꢀ LLA219R71E473MA01#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm 4Vdc X7S
0.1µF
0.±±µF
0.47µF
1.0µF
±±0ꢀ LLA185C70G104MA01#
±±0ꢀ LLA185C70G224MA01#
±±0ꢀ LLA185C70G474MA01#
±±0ꢀ LLA185C70G105ME01#
±±0ꢀ LLA185C70G225ME16#
16Vdc X7R 0.1µF
0.±±µF
±±0ꢀ LLA219R71C104MA01#
±±0ꢀ LLA219R71C224MA01#
±±0ꢀ LLA219R71A474MA01#
±±0ꢀ LLA219R70J105MA01#
±±0ꢀ LLA219C70G225MA01#
±±0ꢀ LLA219C70G475ME01#
10Vdc X7R 0.47µF
6.3Vdc X7R 1.0µF
±.±µF
4Vdc X7S
±.±µF
4.7µF
2.0×1.25mm
c
3.2×1.6mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm ±5Vdc X7R 10000pF ±±0ꢀ LLA215R71E103MA14#
±±000pF ±±0ꢀ LLA215R71E223MA14#
0.55mm 16Vdc X7R 0.±±µF
10Vdc X7R 0.47µF
6.3Vdc X7R 1.0µF
±.±µF
±±0ꢀ LLA315R71C224MA14#
±±0ꢀ LLA315R71A474MA14#
±±0ꢀ LLA315R70J105MA14#
±±0ꢀ LLA315R70J225MA14#
±±0ꢀ LLA319R71C474MA01#
±±0ꢀ LLA319R71A105MA01#
±±0ꢀ LLA31MR71C105MA01#
±±0ꢀ LLA31MR71A225MA01#
16Vdc X7R 47000pF ±±0ꢀ LLA215R71C473MA14#
0.1µF
10Vdc X7R 0.±±µF
6.3Vdc X7R 0.47µF
±±0ꢀ LLA215R71C104MA14#
±±0ꢀ LLA215R71A224MA14#
±±0ꢀ LLA215R70J474MA14#
±±0ꢀ LLA215C70G105MA14#
±±0ꢀ LLA215C70G225ME11#
±±0ꢀ LLA215C70G475ME19#
0.95mm 16Vdc X7R 0.47µF
10Vdc X7R 1.0µF
1.±5mm 16Vdc X7R 1.0µF
10Vdc X7R ±.±µF
4Vdc X7S
1.0µF
±.±µF
4.7µF
0.95mm ±5Vdc X7R 10000pF ±±0ꢀ LLA219R71E103MA01#
Low
ESL
LLM Series High Dielectric Constant Type
Part Number List
2.0×1.25mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm ±5Vdc X7R 10000pF ±±0ꢀ LLM215R71E103MA11#
±±000pF ±±0ꢀ LLM215R71E223MA11#
16Vdc X7R 47000pF ±±0ꢀ LLM215R71C473MA11#
0.1µF
6.3Vdc X7R 0.±±µF
0.47µF
±±0ꢀ LLM215R71C104MA11#
±±0ꢀ LLM215R70J224MA11#
±±0ꢀ LLM215R70J474MA11#
±±0ꢀ LLM215C70G105MA11#
±±0ꢀ LLM215C70G225ME11#
4Vdc X7S
1.0µF
±.±µF
3.2×1.6mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm 16Vdc X7R 0.1µF
0.±±µF
±±0ꢀ LLM315R71C104MA11#
±±0ꢀ LLM315R71C224MA11#
±±0ꢀ LLM315R71A474MA11#
±±0ꢀ LLM315R70J225MA11#
10Vdc X7R 0.47µF
6.3Vdc X7R ±.±µF
Part number # indicates the package specification code.
81
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
HiQ
High-Q Type GJM Series
Contributes to improvements in the reduction of power consumption and processing yield
by HiQ or low ESR.
e
g
e
T
W
L
1
2
3
Ideal for high-frequency decoupling applications.
HiQ and low ESR in VHF, UHF and microwave frequency bands.
Compatible to tight tolerances.
82
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
T
Rated
TC
Ultra-
Cap.
Tol.
Part Number
0.4×0.2mm
c
compact
max. Voltage Code
0.22mm 16Vdc C0G 2.2pF
0.0ꢀpF GJM0225C1C2R2WB01#
0.1pF GJM0225C1C2R2BB01#
0.2ꢀpF GJM0225C1C2R2CB01#
0.0ꢀpF GJM0225C1C2R3WB01#
0.1pF GJM0225C1C2R3BB01#
0.2ꢀpF GJM0225C1C2R3CB01#
0.0ꢀpF GJM0225C1C2R4WB01#
0.1pF GJM0225C1C2R4BB01#
0.2ꢀpF GJM0225C1C2R4CB01#
0.0ꢀpF GJM0225C1C2R5WB01#
0.1pF GJM0225C1C2R5BB01#
0.2ꢀpF GJM0225C1C2R5CB01#
0.0ꢀpF GJM0225C1C2R6WB01#
0.1pF GJM0225C1C2R6BB01#
0.2ꢀpF GJM0225C1C2R6CB01#
0.0ꢀpF GJM0225C1C2R7WB01#
0.1pF GJM0225C1C2R7BB01#
0.2ꢀpF GJM0225C1C2R7CB01#
0.0ꢀpF GJM0225C1C2R8WB01#
0.1pF GJM0225C1C2R8BB01#
0.2ꢀpF GJM0225C1C2R8CB01#
0.0ꢀpF GJM0225C1C2R9WB01#
0.1pF GJM0225C1C2R9BB01#
0.2ꢀpF GJM0225C1C2R9CB01#
0.0ꢀpF GJM0225C1C3R0WB01#
0.1pF GJM0225C1C3R0BB01#
0.2ꢀpF GJM0225C1C3R0CB01#
0.0ꢀpF GJM0225C1C3R1WB01#
0.1pF GJM0225C1C3R1BB01#
0.2ꢀpF GJM0225C1C3R1CB01#
0.0ꢀpF GJM0225C1C3R2WB01#
0.1pF GJM0225C1C3R2BB01#
0.2ꢀpF GJM0225C1C3R2CB01#
0.0ꢀpF GJM0225C1C3R3WB01#
0.1pF GJM0225C1C3R3BB01#
0.2ꢀpF GJM0225C1C3R3CB01#
0.0ꢀpF GJM0225C1C3R4WB01#
0.1pF GJM0225C1C3R4BB01#
0.2ꢀpF GJM0225C1C3R4CB01#
0.0ꢀpF GJM0225C1C3R5WB01#
0.1pF GJM0225C1C3R5BB01#
0.2ꢀpF GJM0225C1C3R5CB01#
0.0ꢀpF GJM0225C1C3R6WB01#
0.1pF GJM0225C1C3R6BB01#
0.2ꢀpF GJM0225C1C3R6CB01#
0.0ꢀpF GJM0225C1C3R7WB01#
0.1pF GJM0225C1C3R7BB01#
0.2ꢀpF GJM0225C1C3R7CB01#
0.0ꢀpF GJM0225C1C3R8WB01#
0.1pF GJM0225C1C3R8BB01#
0.2ꢀpF GJM0225C1C3R8CB01#
0.0ꢀpF GJM0225C1C3R9WB01#
0.1pF GJM0225C1C3R9BB01#
0.2ꢀpF GJM0225C1C3R9CB01#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.22mm 16Vdc C0G 0.2pF
0.0ꢀpF GJM0225C1CR20WB01#
0.1pF GJM0225C1CR20BB01#
0.0ꢀpF GJM0225C1CR30WB01#
0.1pF GJM0225C1CR30BB01#
0.0ꢀpF GJM0225C1CR40WB01#
0.1pF GJM0225C1CR40BB01#
0.0ꢀpF GJM0225C1CR50WB01#
0.1pF GJM0225C1CR50BB01#
0.0ꢀpF GJM0225C1CR60WB01#
0.1pF GJM0225C1CR60BB01#
0.0ꢀpF GJM0225C1CR70WB01#
0.1pF GJM0225C1CR70BB01#
0.0ꢀpF GJM0225C1CR80WB01#
0.1pF GJM0225C1CR80BB01#
0.0ꢀpF GJM0225C1CR90WB01#
0.1pF GJM0225C1CR90BB01#
0.0ꢀpF GJM0225C1C1R0WB01#
0.1pF GJM0225C1C1R0BB01#
0.2ꢀpF GJM0225C1C1R0CB01#
0.0ꢀpF GJM0225C1C1R1WB01#
0.1pF GJM0225C1C1R1BB01#
0.2ꢀpF GJM0225C1C1R1CB01#
0.0ꢀpF GJM0225C1C1R2WB01#
0.1pF GJM0225C1C1R2BB01#
0.2ꢀpF GJM0225C1C1R2CB01#
0.0ꢀpF GJM0225C1C1R3WB01#
0.1pF GJM0225C1C1R3BB01#
0.2ꢀpF GJM0225C1C1R3CB01#
0.0ꢀpF GJM0225C1C1R4WB01#
0.1pF GJM0225C1C1R4BB01#
0.2ꢀpF GJM0225C1C1R4CB01#
0.0ꢀpF GJM0225C1C1R5WB01#
0.1pF GJM0225C1C1R5BB01#
0.2ꢀpF GJM0225C1C1R5CB01#
0.0ꢀpF GJM0225C1C1R6WB01#
0.1pF GJM0225C1C1R6BB01#
0.2ꢀpF GJM0225C1C1R6CB01#
0.0ꢀpF GJM0225C1C1R7WB01#
0.1pF GJM0225C1C1R7BB01#
0.2ꢀpF GJM0225C1C1R7CB01#
0.0ꢀpF GJM0225C1C1R8WB01#
0.1pF GJM0225C1C1R8BB01#
0.2ꢀpF GJM0225C1C1R8CB01#
0.0ꢀpF GJM0225C1C1R9WB01#
0.1pF GJM0225C1C1R9BB01#
0.2ꢀpF GJM0225C1C1R9CB01#
0.0ꢀpF GJM0225C1C2R0WB01#
0.1pF GJM0225C1C2R0BB01#
0.2ꢀpF GJM0225C1C2R0CB01#
0.0ꢀpF GJM0225C1C2R1WB01#
0.1pF GJM0225C1C2R1BB01#
0.2ꢀpF GJM0225C1C2R1CB01#
2.3pF
2.4pF
2.ꢀpF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.ꢀpF
3.6pF
3.7pF
3.8pF
3.9pF
0.3pF
0.4pF
0.ꢀpF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.4pF
1.ꢀpF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
Part number # indicates the package specification code.
83
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc C0G 4.0pF
0.0ꢀpF GJM0225C1C4R0WB01#
0.1pF GJM0225C1C4R0BB01#
0.2ꢀpF GJM0225C1C4R0CB01#
0.0ꢀpF GJM0225C1C4R1WB01#
0.1pF GJM0225C1C4R1BB01#
0.2ꢀpF GJM0225C1C4R1CB01#
0.0ꢀpF GJM0225C1C4R2WB01#
0.1pF GJM0225C1C4R2BB01#
0.2ꢀpF GJM0225C1C4R2CB01#
0.0ꢀpF GJM0225C1C4R3WB01#
0.1pF GJM0225C1C4R3BB01#
0.2ꢀpF GJM0225C1C4R3CB01#
0.0ꢀpF GJM0225C1C4R4WB01#
0.1pF GJM0225C1C4R4BB01#
0.2ꢀpF GJM0225C1C4R4CB01#
0.0ꢀpF GJM0225C1C4R5WB01#
0.1pF GJM0225C1C4R5BB01#
0.2ꢀpF GJM0225C1C4R5CB01#
0.0ꢀpF GJM0225C1C4R6WB01#
0.1pF GJM0225C1C4R6BB01#
0.2ꢀpF GJM0225C1C4R6CB01#
0.0ꢀpF GJM0225C1C4R7WB01#
0.1pF GJM0225C1C4R7BB01#
0.2ꢀpF GJM0225C1C4R7CB01#
0.0ꢀpF GJM0225C1C4R8WB01#
0.1pF GJM0225C1C4R8BB01#
0.2ꢀpF GJM0225C1C4R8CB01#
0.0ꢀpF GJM0225C1C4R9WB01#
0.1pF GJM0225C1C4R9BB01#
0.2ꢀpF GJM0225C1C4R9CB01#
0.0ꢀpF GJM0225C1C5R0WB01#
0.1pF GJM0225C1C5R0BB01#
0.2ꢀpF GJM0225C1C5R0CB01#
0.0ꢀpF GJM0225C1C5R1WB01#
0.1pF GJM0225C1C5R1BB01#
0.2ꢀpF GJM0225C1C5R1CB01#
0.ꢀpF GJM0225C1C5R1DB01#
0.0ꢀpF GJM0225C1C5R2WB01#
0.1pF GJM0225C1C5R2BB01#
0.2ꢀpF GJM0225C1C5R2CB01#
0.ꢀpF GJM0225C1C5R2DB01#
0.0ꢀpF GJM0225C1C5R3WB01#
0.1pF GJM0225C1C5R3BB01#
0.2ꢀpF GJM0225C1C5R3CB01#
0.ꢀpF GJM0225C1C5R3DB01#
0.0ꢀpF GJM0225C1C5R4WB01#
0.1pF GJM0225C1C5R4BB01#
0.2ꢀpF GJM0225C1C5R4CB01#
0.ꢀpF GJM0225C1C5R4DB01#
0.0ꢀpF GJM0225C1C5R5WB01#
0.1pF GJM0225C1C5R5BB01#
0.2ꢀpF GJM0225C1C5R5CB01#
0.ꢀpF GJM0225C1C5R5DB01#
0.0ꢀpF GJM0225C1C5R6WB01#
0.22mm 16Vdc C0G ꢀ.6pF
0.1pF GJM0225C1C5R6BB01#
0.2ꢀpF GJM0225C1C5R6CB01#
0.ꢀpF GJM0225C1C5R6DB01#
0.0ꢀpF GJM0225C1C5R7WB01#
0.1pF GJM0225C1C5R7BB01#
0.2ꢀpF GJM0225C1C5R7CB01#
0.ꢀpF GJM0225C1C5R7DB01#
0.0ꢀpF GJM0225C1C5R8WB01#
0.1pF GJM0225C1C5R8BB01#
0.2ꢀpF GJM0225C1C5R8CB01#
0.ꢀpF GJM0225C1C5R8DB01#
0.0ꢀpF GJM0225C1C5R9WB01#
0.1pF GJM0225C1C5R9BB01#
0.2ꢀpF GJM0225C1C5R9CB01#
0.ꢀpF GJM0225C1C5R9DB01#
0.0ꢀpF GJM0225C1C6R0WB01#
0.1pF GJM0225C1C6R0BB01#
0.2ꢀpF GJM0225C1C6R0CB01#
0.ꢀpF GJM0225C1C6R0DB01#
0.0ꢀpF GJM0225C1C6R1WB01#
0.1pF GJM0225C1C6R1BB01#
0.2ꢀpF GJM0225C1C6R1CB01#
0.ꢀpF GJM0225C1C6R1DB01#
0.0ꢀpF GJM0225C1C6R2WB01#
0.1pF GJM0225C1C6R2BB01#
0.2ꢀpF GJM0225C1C6R2CB01#
0.ꢀpF GJM0225C1C6R2DB01#
0.0ꢀpF GJM0225C1C6R3WB01#
0.1pF GJM0225C1C6R3BB01#
0.2ꢀpF GJM0225C1C6R3CB01#
0.ꢀpF GJM0225C1C6R3DB01#
0.0ꢀpF GJM0225C1C6R4WB01#
0.1pF GJM0225C1C6R4BB01#
0.2ꢀpF GJM0225C1C6R4CB01#
0.ꢀpF GJM0225C1C6R4DB01#
0.0ꢀpF GJM0225C1C6R5WB01#
0.1pF GJM0225C1C6R5BB01#
0.2ꢀpF GJM0225C1C6R5CB01#
0.ꢀpF GJM0225C1C6R5DB01#
0.0ꢀpF GJM0225C1C6R6WB01#
0.1pF GJM0225C1C6R6BB01#
0.2ꢀpF GJM0225C1C6R6CB01#
0.ꢀpF GJM0225C1C6R6DB01#
0.0ꢀpF GJM0225C1C6R7WB01#
0.1pF GJM0225C1C6R7BB01#
0.2ꢀpF GJM0225C1C6R7CB01#
0.ꢀpF GJM0225C1C6R7DB01#
0.0ꢀpF GJM0225C1C6R8WB01#
0.1pF GJM0225C1C6R8BB01#
0.2ꢀpF GJM0225C1C6R8CB01#
0.ꢀpF GJM0225C1C6R8DB01#
0.0ꢀpF GJM0225C1C6R9WB01#
0.1pF GJM0225C1C6R9BB01#
0.2ꢀpF GJM0225C1C6R9CB01#
4.1pF
4.2pF
4.3pF
4.4pF
4.ꢀpF
4.6pF
4.7pF
4.8pF
4.9pF
ꢀ.0pF
ꢀ.1pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
6.0pF
6.1pF
6.2pF
6.3pF
6.4pF
6.ꢀpF
6.6pF
6.7pF
6.8pF
6.9pF
ꢀ.2pF
ꢀ.3pF
ꢀ.4pF
ꢀ.ꢀpF
ꢀ.6pF
Part number # indicates the package specification code.
84
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc C0G 6.9pF
7.0pF
0.ꢀpF GJM0225C1C6R9DB01#
0.0ꢀpF GJM0225C1C7R0WB01#
0.1pF GJM0225C1C7R0BB01#
0.2ꢀpF GJM0225C1C7R0CB01#
0.ꢀpF GJM0225C1C7R0DB01#
0.0ꢀpF GJM0225C1C7R1WB01#
0.1pF GJM0225C1C7R1BB01#
0.2ꢀpF GJM0225C1C7R1CB01#
0.ꢀpF GJM0225C1C7R1DB01#
0.0ꢀpF GJM0225C1C7R2WB01#
0.1pF GJM0225C1C7R2BB01#
0.2ꢀpF GJM0225C1C7R2CB01#
0.ꢀpF GJM0225C1C7R2DB01#
0.0ꢀpF GJM0225C1C7R3WB01#
0.1pF GJM0225C1C7R3BB01#
0.2ꢀpF GJM0225C1C7R3CB01#
0.ꢀpF GJM0225C1C7R3DB01#
0.0ꢀpF GJM0225C1C7R4WB01#
0.1pF GJM0225C1C7R4BB01#
0.2ꢀpF GJM0225C1C7R4CB01#
0.ꢀpF GJM0225C1C7R4DB01#
0.0ꢀpF GJM0225C1C7R5WB01#
0.1pF GJM0225C1C7R5BB01#
0.2ꢀpF GJM0225C1C7R5CB01#
0.ꢀpF GJM0225C1C7R5DB01#
0.0ꢀpF GJM0225C1C7R6WB01#
0.1pF GJM0225C1C7R6BB01#
0.2ꢀpF GJM0225C1C7R6CB01#
0.ꢀpF GJM0225C1C7R6DB01#
0.0ꢀpF GJM0225C1C7R7WB01#
0.1pF GJM0225C1C7R7BB01#
0.2ꢀpF GJM0225C1C7R7CB01#
0.ꢀpF GJM0225C1C7R7DB01#
0.0ꢀpF GJM0225C1C7R8WB01#
0.1pF GJM0225C1C7R8BB01#
0.2ꢀpF GJM0225C1C7R8CB01#
0.ꢀpF GJM0225C1C7R8DB01#
0.0ꢀpF GJM0225C1C7R9WB01#
0.1pF GJM0225C1C7R9BB01#
0.2ꢀpF GJM0225C1C7R9CB01#
0.ꢀpF GJM0225C1C7R9DB01#
0.0ꢀpF GJM0225C1C8R0WB01#
0.1pF GJM0225C1C8R0BB01#
0.2ꢀpF GJM0225C1C8R0CB01#
0.ꢀpF GJM0225C1C8R0DB01#
0.0ꢀpF GJM0225C1C8R1WB01#
0.1pF GJM0225C1C8R1BB01#
0.2ꢀpF GJM0225C1C8R1CB01#
0.ꢀpF GJM0225C1C8R1DB01#
0.0ꢀpF GJM0225C1C8R2WB01#
0.1pF GJM0225C1C8R2BB01#
0.2ꢀpF GJM0225C1C8R2CB01#
0.ꢀpF GJM0225C1C8R2DB01#
0.0ꢀpF GJM0225C1C8R3WB01#
0.22mm 16Vdc C0G 8.3pF
0.1pF GJM0225C1C8R3BB01#
0.2ꢀpF GJM0225C1C8R3CB01#
0.ꢀpF GJM0225C1C8R3DB01#
0.0ꢀpF GJM0225C1C8R4WB01#
0.1pF GJM0225C1C8R4BB01#
0.2ꢀpF GJM0225C1C8R4CB01#
0.ꢀpF GJM0225C1C8R4DB01#
0.0ꢀpF GJM0225C1C8R5WB01#
0.1pF GJM0225C1C8R5BB01#
0.2ꢀpF GJM0225C1C8R5CB01#
0.ꢀpF GJM0225C1C8R5DB01#
0.0ꢀpF GJM0225C1C8R6WB01#
0.1pF GJM0225C1C8R6BB01#
0.2ꢀpF GJM0225C1C8R6CB01#
0.ꢀpF GJM0225C1C8R6DB01#
0.0ꢀpF GJM0225C1C8R7WB01#
0.1pF GJM0225C1C8R7BB01#
0.2ꢀpF GJM0225C1C8R7CB01#
0.ꢀpF GJM0225C1C8R7DB01#
0.0ꢀpF GJM0225C1C8R8WB01#
0.1pF GJM0225C1C8R8BB01#
0.2ꢀpF GJM0225C1C8R8CB01#
0.ꢀpF GJM0225C1C8R8DB01#
0.0ꢀpF GJM0225C1C8R9WB01#
0.1pF GJM0225C1C8R9BB01#
0.2ꢀpF GJM0225C1C8R9CB01#
0.ꢀpF GJM0225C1C8R9DB01#
0.0ꢀpF GJM0225C1C9R0WB01#
0.1pF GJM0225C1C9R0BB01#
0.2ꢀpF GJM0225C1C9R0CB01#
0.ꢀpF GJM0225C1C9R0DB01#
0.0ꢀpF GJM0225C1C9R1WB01#
0.1pF GJM0225C1C9R1BB01#
0.2ꢀpF GJM0225C1C9R1CB01#
0.ꢀpF GJM0225C1C9R1DB01#
0.0ꢀpF GJM0225C1C9R2WB01#
0.1pF GJM0225C1C9R2BB01#
0.2ꢀpF GJM0225C1C9R2CB01#
0.ꢀpF GJM0225C1C9R2DB01#
0.0ꢀpF GJM0225C1C9R3WB01#
0.1pF GJM0225C1C9R3BB01#
0.2ꢀpF GJM0225C1C9R3CB01#
0.ꢀpF GJM0225C1C9R3DB01#
0.0ꢀpF GJM0225C1C9R4WB01#
0.1pF GJM0225C1C9R4BB01#
0.2ꢀpF GJM0225C1C9R4CB01#
0.ꢀpF GJM0225C1C9R4DB01#
0.0ꢀpF GJM0225C1C9R5WB01#
0.1pF GJM0225C1C9R5BB01#
0.2ꢀpF GJM0225C1C9R5CB01#
0.ꢀpF GJM0225C1C9R5DB01#
0.0ꢀpF GJM0225C1C9R6WB01#
0.1pF GJM0225C1C9R6BB01#
0.2ꢀpF GJM0225C1C9R6CB01#
8.4pF
7.1pF
7.2pF
7.3pF
7.4pF
7.ꢀpF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.1pF
8.2pF
8.3pF
8.ꢀpF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.1pF
9.2pF
9.3pF
9.4pF
9.ꢀpF
9.6pF
Part number # indicates the package specification code.
8ꢀ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc C0G 9.6pF
9.7pF
0.ꢀpF GJM0225C1C9R6DB01#
0.0ꢀpF GJM0225C1C9R7WB01#
0.1pF GJM0225C1C9R7BB01#
0.2ꢀpF GJM0225C1C9R7CB01#
0.ꢀpF GJM0225C1C9R7DB01#
0.0ꢀpF GJM0225C1C9R8WB01#
0.1pF GJM0225C1C9R8BB01#
0.2ꢀpF GJM0225C1C9R8CB01#
0.ꢀpF GJM0225C1C9R8DB01#
0.0ꢀpF GJM0225C1C9R9WB01#
0.1pF GJM0225C1C9R9BB01#
0.2ꢀpF GJM0225C1C9R9CB01#
0.ꢀpF GJM0225C1C9R9DB01#
0.22mm 16Vdc CK
1.7pF
1.8pF
0.2ꢀpF GJM0224C1C1R7CB01#
0.0ꢀpF GJM0224C1C1R8WB01#
0.1pF GJM0224C1C1R8BB01#
0.2ꢀpF GJM0224C1C1R8CB01#
0.0ꢀpF GJM0224C1C1R9WB01#
0.1pF GJM0224C1C1R9BB01#
0.2ꢀpF GJM0224C1C1R9CB01#
0.0ꢀpF GJM0224C1C2R0WB01#
0.1pF GJM0224C1C2R0BB01#
0.2ꢀpF GJM0224C1C2R0CB01#
0.0ꢀpF GJM0223C1C2R1WB01#
0.1pF GJM0223C1C2R1BB01#
0.2ꢀpF GJM0223C1C2R1CB01#
0.0ꢀpF GJM0223C1C2R2WB01#
0.1pF GJM0223C1C2R2BB01#
0.2ꢀpF GJM0223C1C2R2CB01#
0.0ꢀpF GJM0223C1C2R3WB01#
0.1pF GJM0223C1C2R3BB01#
0.2ꢀpF GJM0223C1C2R3CB01#
0.0ꢀpF GJM0223C1C2R4WB01#
0.1pF GJM0223C1C2R4BB01#
0.2ꢀpF GJM0223C1C2R4CB01#
0.0ꢀpF GJM0223C1C2R5WB01#
0.1pF GJM0223C1C2R5BB01#
0.2ꢀpF GJM0223C1C2R5CB01#
0.0ꢀpF GJM0223C1C2R6WB01#
0.1pF GJM0223C1C2R6BB01#
0.2ꢀpF GJM0223C1C2R6CB01#
0.0ꢀpF GJM0223C1C2R7WB01#
0.1pF GJM0223C1C2R7BB01#
0.2ꢀpF GJM0223C1C2R7CB01#
0.0ꢀpF GJM0223C1C2R8WB01#
0.1pF GJM0223C1C2R8BB01#
0.2ꢀpF GJM0223C1C2R8CB01#
0.0ꢀpF GJM0223C1C2R9WB01#
0.1pF GJM0223C1C2R9BB01#
0.2ꢀpF GJM0223C1C2R9CB01#
0.0ꢀpF GJM0223C1C3R0WB01#
0.1pF GJM0223C1C3R0BB01#
0.2ꢀpF GJM0223C1C3R0CB01#
0.0ꢀpF GJM0223C1C3R1WB01#
0.1pF GJM0223C1C3R1BB01#
0.2ꢀpF GJM0223C1C3R1CB01#
0.0ꢀpF GJM0223C1C3R2WB01#
0.1pF GJM0223C1C3R2BB01#
0.2ꢀpF GJM0223C1C3R2CB01#
0.0ꢀpF GJM0223C1C3R3WB01#
0.1pF GJM0223C1C3R3BB01#
0.2ꢀpF GJM0223C1C3R3CB01#
0.0ꢀpF GJM0223C1C3R4WB01#
0.1pF GJM0223C1C3R4BB01#
0.2ꢀpF GJM0223C1C3R4CB01#
0.0ꢀpF GJM0223C1C3R5WB01#
0.1pF GJM0223C1C3R5BB01#
1.9pF
2.0pF
2.1pF
2.2pF
2.3pF
2.4pF
2.ꢀpF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.ꢀpF
9.8pF
9.9pF
10pF
CJ
2ꢁ
ꢀꢁ
GJM0225C1C100GB01#
GJM0225C1C100JB01#
CK
0.2pF
0.3pF
0.4pF
0.ꢀpF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
0.0ꢀpF GJM0224C1CR20WB01#
0.1pF GJM0224C1CR20BB01#
0.0ꢀpF GJM0224C1CR30WB01#
0.1pF GJM0224C1CR30BB01#
0.0ꢀpF GJM0224C1CR40WB01#
0.1pF GJM0224C1CR40BB01#
0.0ꢀpF GJM0224C1CR50WB01#
0.1pF GJM0224C1CR50BB01#
0.0ꢀpF GJM0224C1CR60WB01#
0.1pF GJM0224C1CR60BB01#
0.0ꢀpF GJM0224C1CR70WB01#
0.1pF GJM0224C1CR70BB01#
0.0ꢀpF GJM0224C1CR80WB01#
0.1pF GJM0224C1CR80BB01#
0.0ꢀpF GJM0224C1CR90WB01#
0.1pF GJM0224C1CR90BB01#
0.0ꢀpF GJM0224C1C1R0WB01#
0.1pF GJM0224C1C1R0BB01#
0.2ꢀpF GJM0224C1C1R0CB01#
0.0ꢀpF GJM0224C1C1R1WB01#
0.1pF GJM0224C1C1R1BB01#
0.2ꢀpF GJM0224C1C1R1CB01#
0.0ꢀpF GJM0224C1C1R2WB01#
0.1pF GJM0224C1C1R2BB01#
0.2ꢀpF GJM0224C1C1R2CB01#
0.0ꢀpF GJM0224C1C1R3WB01#
0.1pF GJM0224C1C1R3BB01#
0.2ꢀpF GJM0224C1C1R3CB01#
0.0ꢀpF GJM0224C1C1R4WB01#
0.1pF GJM0224C1C1R4BB01#
0.2ꢀpF GJM0224C1C1R4CB01#
0.0ꢀpF GJM0224C1C1R5WB01#
0.1pF GJM0224C1C1R5BB01#
0.2ꢀpF GJM0224C1C1R5CB01#
0.0ꢀpF GJM0224C1C1R6WB01#
0.1pF GJM0224C1C1R6BB01#
0.2ꢀpF GJM0224C1C1R6CB01#
0.0ꢀpF GJM0224C1C1R7WB01#
0.1pF GJM0224C1C1R7BB01#
1.1pF
1.2pF
1.3pF
1.4pF
1.ꢀpF
1.6pF
1.7pF
Part number # indicates the package specification code.
86
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc
CJ
3.5pF
3.6pF
0.25pF GJM0223C1C3R5CB01#
0.05pF GJM0223C1C3R6WB01#
0.1pF GJM0223C1C3R6BB01#
0.25pF GJM0223C1C3R6CB01#
0.05pF GJM0223C1C3R7WB01#
0.1pF GJM0223C1C3R7BB01#
0.25pF GJM0223C1C3R7CB01#
0.05pF GJM0223C1C3R8WB01#
0.1pF GJM0223C1C3R8BB01#
0.25pF GJM0223C1C3R8CB01#
0.05pF GJM0223C1C3R9WB01#
0.1pF GJM0223C1C3R9BB01#
0.25pF GJM0223C1C3R9CB01#
0.05pF GJM0222C1C4R0WB01#
0.1pF GJM0222C1C4R0BB01#
0.25pF GJM0222C1C4R0CB01#
0.05pF GJM0222C1C4R1WB01#
0.1pF GJM0222C1C4R1BB01#
0.25pF GJM0222C1C4R1CB01#
0.05pF GJM0222C1C4R2WB01#
0.1pF GJM0222C1C4R2BB01#
0.25pF GJM0222C1C4R2CB01#
0.05pF GJM0222C1C4R3WB01#
0.1pF GJM0222C1C4R3BB01#
0.25pF GJM0222C1C4R3CB01#
0.05pF GJM0222C1C4R4WB01#
0.1pF GJM0222C1C4R4BB01#
0.25pF GJM0222C1C4R4CB01#
0.05pF GJM0222C1C4R5WB01#
0.1pF GJM0222C1C4R5BB01#
0.25pF GJM0222C1C4R5CB01#
0.05pF GJM0222C1C4R6WB01#
0.1pF GJM0222C1C4R6BB01#
0.25pF GJM0222C1C4R6CB01#
0.05pF GJM0222C1C4R7WB01#
0.1pF GJM0222C1C4R7BB01#
0.25pF GJM0222C1C4R7CB01#
0.05pF GJM0222C1C4R8WB01#
0.1pF GJM0222C1C4R8BB01#
0.25pF GJM0222C1C4R8CB01#
0.05pF GJM0222C1C4R9WB01#
0.1pF GJM0222C1C4R9BB01#
0.25pF GJM0222C1C4R9CB01#
0.05pF GJM0222C1C5R0WB01#
0.1pF GJM0222C1C5R0BB01#
0.25pF GJM0222C1C5R0CB01#
0.05pF GJM0222C1C5R1WB01#
0.1pF GJM0222C1C5R1BB01#
0.25pF GJM0222C1C5R1CB01#
0.5pF GJM0222C1C5R1DB01#
0.05pF GJM0222C1C5R2WB01#
0.1pF GJM0222C1C5R2BB01#
0.25pF GJM0222C1C5R2CB01#
0.5pF GJM0222C1C5R2DB01#
0.22mm 16Vdc CH
5.3pF
0.05pF GJM0222C1C5R3WB01#
0.1pF GJM0222C1C5R3BB01#
0.25pF GJM0222C1C5R3CB01#
0.5pF GJM0222C1C5R3DB01#
0.05pF GJM0222C1C5R4WB01#
0.1pF GJM0222C1C5R4BB01#
0.25pF GJM0222C1C5R4CB01#
0.5pF GJM0222C1C5R4DB01#
0.05pF GJM0222C1C5R5WB01#
0.1pF GJM0222C1C5R5BB01#
0.25pF GJM0222C1C5R5CB01#
0.5pF GJM0222C1C5R5DB01#
0.05pF GJM0222C1C5R6WB01#
0.1pF GJM0222C1C5R6BB01#
0.25pF GJM0222C1C5R6CB01#
0.5pF GJM0222C1C5R6DB01#
0.05pF GJM0222C1C5R7WB01#
0.1pF GJM0222C1C5R7BB01#
0.25pF GJM0222C1C5R7CB01#
0.5pF GJM0222C1C5R7DB01#
0.05pF GJM0222C1C5R8WB01#
0.1pF GJM0222C1C5R8BB01#
0.25pF GJM0222C1C5R8CB01#
0.5pF GJM0222C1C5R8DB01#
0.05pF GJM0222C1C5R9WB01#
0.1pF GJM0222C1C5R9BB01#
0.25pF GJM0222C1C5R9CB01#
0.5pF GJM0222C1C5R9DB01#
0.05pF GJM0222C1C6R0WB01#
0.1pF GJM0222C1C6R0BB01#
0.25pF GJM0222C1C6R0CB01#
0.5pF GJM0222C1C6R0DB01#
0.05pF GJM0222C1C6R1WB01#
0.1pF GJM0222C1C6R1BB01#
0.25pF GJM0222C1C6R1CB01#
0.5pF GJM0222C1C6R1DB01#
0.05pF GJM0222C1C6R2WB01#
0.1pF GJM0222C1C6R2BB01#
0.25pF GJM0222C1C6R2CB01#
0.5pF GJM0222C1C6R2DB01#
0.05pF GJM0222C1C6R3WB01#
0.1pF GJM0222C1C6R3BB01#
0.25pF GJM0222C1C6R3CB01#
0.5pF GJM0222C1C6R3DB01#
0.05pF GJM0222C1C6R4WB01#
0.1pF GJM0222C1C6R4BB01#
0.25pF GJM0222C1C6R4CB01#
0.5pF GJM0222C1C6R4DB01#
0.05pF GJM0222C1C6R5WB01#
0.1pF GJM0222C1C6R5BB01#
0.25pF GJM0222C1C6R5CB01#
0.5pF GJM0222C1C6R5DB01#
0.05pF GJM0222C1C6R6WB01#
0.1pF GJM0222C1C6R6BB01#
3.7pF
3.8pF
3.9pF
4.0pF
4.1pF
4.2pF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
5.1pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.1pF
6.2pF
6.3pF
6.4pF
6.5pF
6.6pF
CH
5.2pF
Part number # indicates the package specification code.
87
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc CH
6.6pF
0.2ꢀpF GJM0222C1C6R6CB01#
0.ꢀpF GJM0222C1C6R6DB01#
0.0ꢀpF GJM0222C1C6R7WB01#
0.1pF GJM0222C1C6R7BB01#
0.2ꢀpF GJM0222C1C6R7CB01#
0.ꢀpF GJM0222C1C6R7DB01#
0.0ꢀpF GJM0222C1C6R8WB01#
0.1pF GJM0222C1C6R8BB01#
0.2ꢀpF GJM0222C1C6R8CB01#
0.ꢀpF GJM0222C1C6R8DB01#
0.0ꢀpF GJM0222C1C6R9WB01#
0.1pF GJM0222C1C6R9BB01#
0.2ꢀpF GJM0222C1C6R9CB01#
0.ꢀpF GJM0222C1C6R9DB01#
0.0ꢀpF GJM0222C1C7R0WB01#
0.1pF GJM0222C1C7R0BB01#
0.2ꢀpF GJM0222C1C7R0CB01#
0.ꢀpF GJM0222C1C7R0DB01#
0.0ꢀpF GJM0222C1C7R1WB01#
0.1pF GJM0222C1C7R1BB01#
0.2ꢀpF GJM0222C1C7R1CB01#
0.ꢀpF GJM0222C1C7R1DB01#
0.0ꢀpF GJM0222C1C7R2WB01#
0.1pF GJM0222C1C7R2BB01#
0.2ꢀpF GJM0222C1C7R2CB01#
0.ꢀpF GJM0222C1C7R2DB01#
0.0ꢀpF GJM0222C1C7R3WB01#
0.1pF GJM0222C1C7R3BB01#
0.2ꢀpF GJM0222C1C7R3CB01#
0.ꢀpF GJM0222C1C7R3DB01#
0.0ꢀpF GJM0222C1C7R4WB01#
0.1pF GJM0222C1C7R4BB01#
0.2ꢀpF GJM0222C1C7R4CB01#
0.ꢀpF GJM0222C1C7R4DB01#
0.0ꢀpF GJM0222C1C7R5WB01#
0.1pF GJM0222C1C7R5BB01#
0.2ꢀpF GJM0222C1C7R5CB01#
0.ꢀpF GJM0222C1C7R5DB01#
0.0ꢀpF GJM0222C1C7R6WB01#
0.1pF GJM0222C1C7R6BB01#
0.2ꢀpF GJM0222C1C7R6CB01#
0.ꢀpF GJM0222C1C7R6DB01#
0.0ꢀpF GJM0222C1C7R7WB01#
0.1pF GJM0222C1C7R7BB01#
0.2ꢀpF GJM0222C1C7R7CB01#
0.ꢀpF GJM0222C1C7R7DB01#
0.0ꢀpF GJM0222C1C7R8WB01#
0.1pF GJM0222C1C7R8BB01#
0.2ꢀpF GJM0222C1C7R8CB01#
0.ꢀpF GJM0222C1C7R8DB01#
0.0ꢀpF GJM0222C1C7R9WB01#
0.1pF GJM0222C1C7R9BB01#
0.2ꢀpF GJM0222C1C7R9CB01#
0.ꢀpF GJM0222C1C7R9DB01#
0.22mm 16Vdc CH
8.0pF
0.0ꢀpF GJM0222C1C8R0WB01#
0.1pF GJM0222C1C8R0BB01#
0.2ꢀpF GJM0222C1C8R0CB01#
0.ꢀpF GJM0222C1C8R0DB01#
0.0ꢀpF GJM0222C1C8R1WB01#
0.1pF GJM0222C1C8R1BB01#
0.2ꢀpF GJM0222C1C8R1CB01#
0.ꢀpF GJM0222C1C8R1DB01#
0.0ꢀpF GJM0222C1C8R2WB01#
0.1pF GJM0222C1C8R2BB01#
0.2ꢀpF GJM0222C1C8R2CB01#
0.ꢀpF GJM0222C1C8R2DB01#
0.0ꢀpF GJM0222C1C8R3WB01#
0.1pF GJM0222C1C8R3BB01#
0.2ꢀpF GJM0222C1C8R3CB01#
0.ꢀpF GJM0222C1C8R3DB01#
0.0ꢀpF GJM0222C1C8R4WB01#
0.1pF GJM0222C1C8R4BB01#
0.2ꢀpF GJM0222C1C8R4CB01#
0.ꢀpF GJM0222C1C8R4DB01#
0.0ꢀpF GJM0222C1C8R5WB01#
0.1pF GJM0222C1C8R5BB01#
0.2ꢀpF GJM0222C1C8R5CB01#
0.ꢀpF GJM0222C1C8R5DB01#
0.0ꢀpF GJM0222C1C8R6WB01#
0.1pF GJM0222C1C8R6BB01#
0.2ꢀpF GJM0222C1C8R6CB01#
0.ꢀpF GJM0222C1C8R6DB01#
0.0ꢀpF GJM0222C1C8R7WB01#
0.1pF GJM0222C1C8R7BB01#
0.2ꢀpF GJM0222C1C8R7CB01#
0.ꢀpF GJM0222C1C8R7DB01#
0.0ꢀpF GJM0222C1C8R8WB01#
0.1pF GJM0222C1C8R8BB01#
0.2ꢀpF GJM0222C1C8R8CB01#
0.ꢀpF GJM0222C1C8R8DB01#
0.0ꢀpF GJM0222C1C8R9WB01#
0.1pF GJM0222C1C8R9BB01#
0.2ꢀpF GJM0222C1C8R9CB01#
0.ꢀpF GJM0222C1C8R9DB01#
0.0ꢀpF GJM0222C1C9R0WB01#
0.1pF GJM0222C1C9R0BB01#
0.2ꢀpF GJM0222C1C9R0CB01#
0.ꢀpF GJM0222C1C9R0DB01#
0.0ꢀpF GJM0222C1C9R1WB01#
0.1pF GJM0222C1C9R1BB01#
0.2ꢀpF GJM0222C1C9R1CB01#
0.ꢀpF GJM0222C1C9R1DB01#
0.0ꢀpF GJM0222C1C9R2WB01#
0.1pF GJM0222C1C9R2BB01#
0.2ꢀpF GJM0222C1C9R2CB01#
0.ꢀpF GJM0222C1C9R2DB01#
0.0ꢀpF GJM0222C1C9R3WB01#
0.1pF GJM0222C1C9R3BB01#
6.7pF
6.8pF
6.9pF
7.0pF
7.1pF
7.2pF
7.3pF
7.4pF
7.ꢀpF
7.6pF
7.7pF
7.8pF
7.9pF
8.1pF
8.2pF
8.3pF
8.4pF
8.ꢀpF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.1pF
9.2pF
9.3pF
Part number # indicates the package specification code.
88
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.4×0.2mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.22mm 16Vdc CH
9.3pF
0.2ꢀpF GJM0222C1C9R3CB01#
0.ꢀpF GJM0222C1C9R3DB01#
0.0ꢀpF GJM0222C1C9R4WB01#
0.1pF GJM0222C1C9R4BB01#
0.2ꢀpF GJM0222C1C9R4CB01#
0.ꢀpF GJM0222C1C9R4DB01#
0.0ꢀpF GJM0222C1C9R5WB01#
0.1pF GJM0222C1C9R5BB01#
0.2ꢀpF GJM0222C1C9R5CB01#
0.ꢀpF GJM0222C1C9R5DB01#
0.0ꢀpF GJM0222C1C9R6WB01#
0.1pF GJM0222C1C9R6BB01#
0.2ꢀpF GJM0222C1C9R6CB01#
0.ꢀpF GJM0222C1C9R6DB01#
0.0ꢀpF GJM0222C1C9R7WB01#
0.1pF GJM0222C1C9R7BB01#
0.2ꢀpF GJM0222C1C9R7CB01#
0.ꢀpF GJM0222C1C9R7DB01#
0.0ꢀpF GJM0222C1C9R8WB01#
0.1pF GJM0222C1C9R8BB01#
0.2ꢀpF GJM0222C1C9R8CB01#
0.ꢀpF GJM0222C1C9R8DB01#
0.0ꢀpF GJM0222C1C9R9WB01#
0.1pF GJM0222C1C9R9BB01#
0.2ꢀpF GJM0222C1C9R9CB01#
0.ꢀpF GJM0222C1C9R9DB01#
0.33mm 2ꢀVdc C0G 1.1pF
1.2pF
0.2ꢀpF GJM0335C1E1R1CB01#
0.0ꢀpF GJM0335C1E1R2WB01#
0.1pF GJM0335C1E1R2BB01#
0.2ꢀpF GJM0335C1E1R2CB01#
0.0ꢀpF GJM0335C1E1R3WB01#
0.1pF GJM0335C1E1R3BB01#
0.2ꢀpF GJM0335C1E1R3CB01#
0.0ꢀpF GJM0335C1E1R4WB01#
0.1pF GJM0335C1E1R4BB01#
0.2ꢀpF GJM0335C1E1R4CB01#
0.0ꢀpF GJM0335C1E1R5WB01#
0.1pF GJM0335C1E1R5BB01#
0.2ꢀpF GJM0335C1E1R5CB01#
0.0ꢀpF GJM0335C1E1R6WB01#
0.1pF GJM0335C1E1R6BB01#
0.2ꢀpF GJM0335C1E1R6CB01#
0.0ꢀpF GJM0335C1E1R7WB01#
0.1pF GJM0335C1E1R7BB01#
0.2ꢀpF GJM0335C1E1R7CB01#
0.0ꢀpF GJM0335C1E1R8WB01#
0.1pF GJM0335C1E1R8BB01#
0.2ꢀpF GJM0335C1E1R8CB01#
0.0ꢀpF GJM0335C1E1R9WB01#
0.1pF GJM0335C1E1R9BB01#
0.2ꢀpF GJM0335C1E1R9CB01#
0.0ꢀpF GJM0335C1E2R0WB01#
0.1pF GJM0335C1E2R0BB01#
0.2ꢀpF GJM0335C1E2R0CB01#
0.0ꢀpF GJM0335C1E2R1WB01#
0.1pF GJM0335C1E2R1BB01#
0.2ꢀpF GJM0335C1E2R1CB01#
0.0ꢀpF GJM0335C1E2R2WB01#
0.1pF GJM0335C1E2R2BB01#
0.2ꢀpF GJM0335C1E2R2CB01#
0.0ꢀpF GJM0335C1E2R3WB01#
0.1pF GJM0335C1E2R3BB01#
0.2ꢀpF GJM0335C1E2R3CB01#
0.0ꢀpF GJM0335C1E2R4WB01#
0.1pF GJM0335C1E2R4BB01#
0.2ꢀpF GJM0335C1E2R4CB01#
0.0ꢀpF GJM0335C1E2R5WB01#
0.1pF GJM0335C1E2R5BB01#
0.2ꢀpF GJM0335C1E2R5CB01#
0.0ꢀpF GJM0335C1E2R6WB01#
0.1pF GJM0335C1E2R6BB01#
0.2ꢀpF GJM0335C1E2R6CB01#
0.0ꢀpF GJM0335C1E2R7WB01#
0.1pF GJM0335C1E2R7BB01#
0.2ꢀpF GJM0335C1E2R7CB01#
0.0ꢀpF GJM0335C1E2R8WB01#
0.1pF GJM0335C1E2R8BB01#
0.2ꢀpF GJM0335C1E2R8CB01#
0.0ꢀpF GJM0335C1E2R9WB01#
0.1pF GJM0335C1E2R9BB01#
9.4pF
9.ꢀpF
9.6pF
9.7pF
9.8pF
9.9pF
10pF
1.3pF
1.4pF
1.ꢀpF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
2.2pF
2.3pF
2.4pF
2.ꢀpF
2.6pF
2.7pF
2.8pF
2.9pF
2ꢁ
ꢀꢁ
GJM0222C1C100GB01#
GJM0222C1C100JB01#
Ultra-
0.6×0.3mm
c
compact
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.33mm 2ꢀVdc C0G 0.2pF
0.0ꢀpF GJM0335C1ER20WB01#
0.1pF GJM0335C1ER20BB01#
0.0ꢀpF GJM0335C1ER30WB01#
0.1pF GJM0335C1ER30BB01#
0.0ꢀpF GJM0335C1ER40WB01#
0.1pF GJM0335C1ER40BB01#
0.0ꢀpF GJM0335C1ER50WB01#
0.1pF GJM0335C1ER50BB01#
0.0ꢀpF GJM0335C1ER60WB01#
0.1pF GJM0335C1ER60BB01#
0.0ꢀpF GJM0335C1ER70WB01#
0.1pF GJM0335C1ER70BB01#
0.0ꢀpF GJM0335C1ER80WB01#
0.1pF GJM0335C1ER80BB01#
0.0ꢀpF GJM0335C1ER90WB01#
0.1pF GJM0335C1ER90BB01#
0.0ꢀpF GJM0335C1E1R0WB01#
0.1pF GJM0335C1E1R0BB01#
0.2ꢀpF GJM0335C1E1R0CB01#
0.0ꢀpF GJM0335C1E1R1WB01#
0.1pF GJM0335C1E1R1BB01#
0.3pF
0.4pF
0.ꢀpF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
Part number # indicates the package specification code.
89
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 25Vdc C0G 2.9pF
3.0pF
0.25pF GJM0335C1E2R9CB01#
0.05pF GJM0335C1E3R0WB01#
0.ꢀpF GJM0335C1E3R0BB01#
0.25pF GJM0335C1E3R0CB01#
0.05pF GJM0335C1E3R1WB01#
0.ꢀpF GJM0335C1E3R1BB01#
0.25pF GJM0335C1E3R1CB01#
0.05pF GJM0335C1E3R2WB01#
0.ꢀpF GJM0335C1E3R2BB01#
0.25pF GJM0335C1E3R2CB01#
0.05pF GJM0335C1E3R3WB01#
0.ꢀpF GJM0335C1E3R3BB01#
0.25pF GJM0335C1E3R3CB01#
0.05pF GJM0335C1E3R4WB01#
0.ꢀpF GJM0335C1E3R4BB01#
0.25pF GJM0335C1E3R4CB01#
0.05pF GJM0335C1E3R5WB01#
0.ꢀpF GJM0335C1E3R5BB01#
0.25pF GJM0335C1E3R5CB01#
0.05pF GJM0335C1E3R6WB01#
0.ꢀpF GJM0335C1E3R6BB01#
0.25pF GJM0335C1E3R6CB01#
0.05pF GJM0335C1E3R7WB01#
0.ꢀpF GJM0335C1E3R7BB01#
0.25pF GJM0335C1E3R7CB01#
0.05pF GJM0335C1E3R8WB01#
0.ꢀpF GJM0335C1E3R8BB01#
0.25pF GJM0335C1E3R8CB01#
0.05pF GJM0335C1E3R9WB01#
0.ꢀpF GJM0335C1E3R9BB01#
0.25pF GJM0335C1E3R9CB01#
0.05pF GJM0335C1E4R0WB01#
0.ꢀpF GJM0335C1E4R0BB01#
0.25pF GJM0335C1E4R0CB01#
0.05pF GJM0335C1E4R1WB01#
0.ꢀpF GJM0335C1E4R1BB01#
0.25pF GJM0335C1E4R1CB01#
0.05pF GJM0335C1E4R2WB01#
0.ꢀpF GJM0335C1E4R2BB01#
0.25pF GJM0335C1E4R2CB01#
0.05pF GJM0335C1E4R3WB01#
0.ꢀpF GJM0335C1E4R3BB01#
0.25pF GJM0335C1E4R3CB01#
0.05pF GJM0335C1E4R4WB01#
0.ꢀpF GJM0335C1E4R4BB01#
0.25pF GJM0335C1E4R4CB01#
0.05pF GJM0335C1E4R5WB01#
0.ꢀpF GJM0335C1E4R5BB01#
0.25pF GJM0335C1E4R5CB01#
0.05pF GJM0335C1E4R6WB01#
0.ꢀpF GJM0335C1E4R6BB01#
0.25pF GJM0335C1E4R6CB01#
0.05pF GJM0335C1E4R7WB01#
0.ꢀpF GJM0335C1E4R7BB01#
0.33mm 25Vdc C0G 4.7pF
4.8pF
0.25pF GJM0335C1E4R7CB01#
0.05pF GJM0335C1E4R8WB01#
0.ꢀpF GJM0335C1E4R8BB01#
0.25pF GJM0335C1E4R8CB01#
0.05pF GJM0335C1E4R9WB01#
0.ꢀpF GJM0335C1E4R9BB01#
0.25pF GJM0335C1E4R9CB01#
0.05pF GJM0335C1E5R0WB01#
0.ꢀpF GJM0335C1E5R0BB01#
0.25pF GJM0335C1E5R0CB01#
0.05pF GJM0335C1E5R1WB01#
0.ꢀpF GJM0335C1E5R1BB01#
0.25pF GJM0335C1E5R1CB01#
0.5pF GJM0335C1E5R1DB01#
0.05pF GJM0335C1E5R2WB01#
0.ꢀpF GJM0335C1E5R2BB01#
0.25pF GJM0335C1E5R2CB01#
0.5pF GJM0335C1E5R2DB01#
0.05pF GJM0335C1E5R3WB01#
0.ꢀpF GJM0335C1E5R3BB01#
0.25pF GJM0335C1E5R3CB01#
0.5pF GJM0335C1E5R3DB01#
0.05pF GJM0335C1E5R4WB01#
0.ꢀpF GJM0335C1E5R4BB01#
0.25pF GJM0335C1E5R4CB01#
0.5pF GJM0335C1E5R4DB01#
0.05pF GJM0335C1E5R5WB01#
0.ꢀpF GJM0335C1E5R5BB01#
0.25pF GJM0335C1E5R5CB01#
0.5pF GJM0335C1E5R5DB01#
0.05pF GJM0335C1E5R6WB01#
0.ꢀpF GJM0335C1E5R6BB01#
0.25pF GJM0335C1E5R6CB01#
0.5pF GJM0335C1E5R6DB01#
0.05pF GJM0335C1E5R7WB01#
0.ꢀpF GJM0335C1E5R7BB01#
0.25pF GJM0335C1E5R7CB01#
0.5pF GJM0335C1E5R7DB01#
0.05pF GJM0335C1E5R8WB01#
0.ꢀpF GJM0335C1E5R8BB01#
0.25pF GJM0335C1E5R8CB01#
0.5pF GJM0335C1E5R8DB01#
0.05pF GJM0335C1E5R9WB01#
0.ꢀpF GJM0335C1E5R9BB01#
0.25pF GJM0335C1E5R9CB01#
0.5pF GJM0335C1E5R9DB01#
0.05pF GJM0335C1E6R0WB01#
0.ꢀpF GJM0335C1E6R0BB01#
0.25pF GJM0335C1E6R0CB01#
0.5pF GJM0335C1E6R0DB01#
0.05pF GJM0335C1E6R1WB01#
0.ꢀpF GJM0335C1E6R1BB01#
0.25pF GJM0335C1E6R1CB01#
0.5pF GJM0335C1E6R1DB01#
3.ꢀpF
4.9pF
5.0pF
5.ꢀpF
3.2pF
3.3pF
3.4pF
5.2pF
5.3pF
5.4pF
5.5pF
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
4.0pF
4.ꢀpF
4.2pF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
Part number # indicates the package specification code.
90
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 25Vdc C0G 6.2pF
0.05pF GJM0335C1E6R2WB01#
0.ꢀpF GJM0335C1E6R2BB01#
0.25pF GJM0335C1E6R2CB01#
0.5pF GJM0335C1E6R2DB01#
0.05pF GJM0335C1E6R3WB01#
0.ꢀpF GJM0335C1E6R3BB01#
0.25pF GJM0335C1E6R3CB01#
0.5pF GJM0335C1E6R3DB01#
0.05pF GJM0335C1E6R4WB01#
0.ꢀpF GJM0335C1E6R4BB01#
0.25pF GJM0335C1E6R4CB01#
0.5pF GJM0335C1E6R4DB01#
0.05pF GJM0335C1E6R5WB01#
0.ꢀpF GJM0335C1E6R5BB01#
0.25pF GJM0335C1E6R5CB01#
0.5pF GJM0335C1E6R5DB01#
0.05pF GJM0335C1E6R6WB01#
0.ꢀpF GJM0335C1E6R6BB01#
0.25pF GJM0335C1E6R6CB01#
0.5pF GJM0335C1E6R6DB01#
0.05pF GJM0335C1E6R7WB01#
0.ꢀpF GJM0335C1E6R7BB01#
0.25pF GJM0335C1E6R7CB01#
0.5pF GJM0335C1E6R7DB01#
0.05pF GJM0335C1E6R8WB01#
0.ꢀpF GJM0335C1E6R8BB01#
0.25pF GJM0335C1E6R8CB01#
0.5pF GJM0335C1E6R8DB01#
0.05pF GJM0336C1E6R9WB01#
0.ꢀpF GJM0336C1E6R9BB01#
0.25pF GJM0336C1E6R9CB01#
0.5pF GJM0336C1E6R9DB01#
0.05pF GJM0336C1E7R0WB01#
0.ꢀpF GJM0336C1E7R0BB01#
0.25pF GJM0336C1E7R0CB01#
0.5pF GJM0336C1E7R0DB01#
0.05pF GJM0336C1E7R1WB01#
0.ꢀpF GJM0336C1E7R1BB01#
0.25pF GJM0336C1E7R1CB01#
0.5pF GJM0336C1E7R1DB01#
0.05pF GJM0336C1E7R2WB01#
0.ꢀpF GJM0336C1E7R2BB01#
0.25pF GJM0336C1E7R2CB01#
0.5pF GJM0336C1E7R2DB01#
0.05pF GJM0336C1E7R3WB01#
0.ꢀpF GJM0336C1E7R3BB01#
0.25pF GJM0336C1E7R3CB01#
0.5pF GJM0336C1E7R3DB01#
0.05pF GJM0336C1E7R4WB01#
0.ꢀpF GJM0336C1E7R4BB01#
0.25pF GJM0336C1E7R4CB01#
0.5pF GJM0336C1E7R4DB01#
0.05pF GJM0336C1E7R5WB01#
0.ꢀpF GJM0336C1E7R5BB01#
0.33mm 25Vdc C0H 7.5pF
7.6pF
0.25pF GJM0336C1E7R5CB01#
0.5pF GJM0336C1E7R5DB01#
0.05pF GJM0336C1E7R6WB01#
0.ꢀpF GJM0336C1E7R6BB01#
0.25pF GJM0336C1E7R6CB01#
0.5pF GJM0336C1E7R6DB01#
0.05pF GJM0336C1E7R7WB01#
0.ꢀpF GJM0336C1E7R7BB01#
0.25pF GJM0336C1E7R7CB01#
0.5pF GJM0336C1E7R7DB01#
0.05pF GJM0336C1E7R8WB01#
0.ꢀpF GJM0336C1E7R8BB01#
0.25pF GJM0336C1E7R8CB01#
0.5pF GJM0336C1E7R8DB01#
0.05pF GJM0336C1E7R9WB01#
0.ꢀpF GJM0336C1E7R9BB01#
0.25pF GJM0336C1E7R9CB01#
0.5pF GJM0336C1E7R9DB01#
0.05pF GJM0336C1E8R0WB01#
0.ꢀpF GJM0336C1E8R0BB01#
0.25pF GJM0336C1E8R0CB01#
0.5pF GJM0336C1E8R0DB01#
0.05pF GJM0336C1E8R1WB01#
0.ꢀpF GJM0336C1E8R1BB01#
0.25pF GJM0336C1E8R1CB01#
0.5pF GJM0336C1E8R1DB01#
0.05pF GJM0336C1E8R2WB01#
0.ꢀpF GJM0336C1E8R2BB01#
0.25pF GJM0336C1E8R2CB01#
0.5pF GJM0336C1E8R2DB01#
0.05pF GJM0336C1E8R3WB01#
0.ꢀpF GJM0336C1E8R3BB01#
0.25pF GJM0336C1E8R3CB01#
0.5pF GJM0336C1E8R3DB01#
0.05pF GJM0336C1E8R4WB01#
0.ꢀpF GJM0336C1E8R4BB01#
0.25pF GJM0336C1E8R4CB01#
0.5pF GJM0336C1E8R4DB01#
0.05pF GJM0336C1E8R5WB01#
0.ꢀpF GJM0336C1E8R5BB01#
0.25pF GJM0336C1E8R5CB01#
0.5pF GJM0336C1E8R5DB01#
0.05pF GJM0336C1E8R6WB01#
0.ꢀpF GJM0336C1E8R6BB01#
0.25pF GJM0336C1E8R6CB01#
0.5pF GJM0336C1E8R6DB01#
0.05pF GJM0336C1E8R7WB01#
0.ꢀpF GJM0336C1E8R7BB01#
0.25pF GJM0336C1E8R7CB01#
0.5pF GJM0336C1E8R7DB01#
0.05pF GJM0336C1E8R8WB01#
0.ꢀpF GJM0336C1E8R8BB01#
0.25pF GJM0336C1E8R8CB01#
0.5pF GJM0336C1E8R8DB01#
6.3pF
6.4pF
7.7pF
7.8pF
7.9pF
8.0pF
8.ꢀpF
8.2pF
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
6.5pF
6.6pF
6.7pF
6.8pF
C0H 6.9pF
7.0pF
7.ꢀpF
7.2pF
7.3pF
7.4pF
7.5pF
Part number # indicates the package specification code.
9ꢀ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 25Vdc C0H 8.9pF
0.05pF GJM0336C1E8R9WB01#
0.ꢀpF GJM0336C1E8R9BB01#
0.25pF GJM0336C1E8R9CB01#
0.5pF GJM0336C1E8R9DB01#
0.05pF GJM0336C1E9R0WB01#
0.ꢀpF GJM0336C1E9R0BB01#
0.25pF GJM0336C1E9R0CB01#
0.5pF GJM0336C1E9R0DB01#
0.05pF GJM0336C1E9R1WB01#
0.ꢀpF GJM0336C1E9R1BB01#
0.25pF GJM0336C1E9R1CB01#
0.5pF GJM0336C1E9R1DB01#
0.05pF GJM0336C1E9R2WB01#
0.ꢀpF GJM0336C1E9R2BB01#
0.25pF GJM0336C1E9R2CB01#
0.5pF GJM0336C1E9R2DB01#
0.05pF GJM0336C1E9R3WB01#
0.ꢀpF GJM0336C1E9R3BB01#
0.25pF GJM0336C1E9R3CB01#
0.5pF GJM0336C1E9R3DB01#
0.05pF GJM0336C1E9R4WB01#
0.ꢀpF GJM0336C1E9R4BB01#
0.25pF GJM0336C1E9R4CB01#
0.5pF GJM0336C1E9R4DB01#
0.05pF GJM0336C1E9R5WB01#
0.ꢀpF GJM0336C1E9R5BB01#
0.25pF GJM0336C1E9R5CB01#
0.5pF GJM0336C1E9R5DB01#
0.05pF GJM0336C1E9R6WB01#
0.ꢀpF GJM0336C1E9R6BB01#
0.25pF GJM0336C1E9R6CB01#
0.5pF GJM0336C1E9R6DB01#
0.05pF GJM0336C1E9R7WB01#
0.ꢀpF GJM0336C1E9R7BB01#
0.25pF GJM0336C1E9R7CB01#
0.5pF GJM0336C1E9R7DB01#
0.05pF GJM0336C1E9R8WB01#
0.ꢀpF GJM0336C1E9R8BB01#
0.25pF GJM0336C1E9R8CB01#
0.5pF GJM0336C1E9R8DB01#
0.05pF GJM0336C1E9R9WB01#
0.ꢀpF GJM0336C1E9R9BB01#
0.25pF GJM0336C1E9R9CB01#
0.5pF GJM0336C1E9R9DB01#
0.33mm 25Vdc C0H
ꢀ6pF
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
GJM0336C1E160GB01#
GJM0336C1E160JB01#
GJM0336C1E180GB01#
GJM0336C1E180JB01#
GJM0336C1E200GB01#
GJM0336C1E200JB01#
ꢀ8pF
20pF
9.0pF
9.ꢀpF
9.2pF
9.3pF
9.4pF
9.5pF
9.6pF
9.7pF
9.8pF
9.9pF
CK
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
ꢀ.0pF
0.05pF GJM0334C1ER20WB01#
0.ꢀpF GJM0334C1ER20BB01#
0.05pF GJM0334C1ER30WB01#
0.ꢀpF GJM0334C1ER30BB01#
0.05pF GJM0334C1ER40WB01#
0.ꢀpF GJM0334C1ER40BB01#
0.05pF GJM0334C1ER50WB01#
0.ꢀpF GJM0334C1ER50BB01#
0.05pF GJM0334C1ER60WB01#
0.ꢀpF GJM0334C1ER60BB01#
0.05pF GJM0334C1ER70WB01#
0.ꢀpF GJM0334C1ER70BB01#
0.05pF GJM0334C1ER80WB01#
0.ꢀpF GJM0334C1ER80BB01#
0.05pF GJM0334C1ER90WB01#
0.ꢀpF GJM0334C1ER90BB01#
0.05pF GJM0334C1E1R0WB01#
0.ꢀpF GJM0334C1E1R0BB01#
0.25pF GJM0334C1E1R0CB01#
0.05pF GJM0334C1E1R1WB01#
0.ꢀpF GJM0334C1E1R1BB01#
0.25pF GJM0334C1E1R1CB01#
0.05pF GJM0334C1E1R2WB01#
0.ꢀpF GJM0334C1E1R2BB01#
0.25pF GJM0334C1E1R2CB01#
0.05pF GJM0334C1E1R3WB01#
0.ꢀpF GJM0334C1E1R3BB01#
0.25pF GJM0334C1E1R3CB01#
0.05pF GJM0334C1E1R4WB01#
0.ꢀpF GJM0334C1E1R4BB01#
0.25pF GJM0334C1E1R4CB01#
0.05pF GJM0334C1E1R5WB01#
0.ꢀpF GJM0334C1E1R5BB01#
0.25pF GJM0334C1E1R5CB01#
0.05pF GJM0334C1E1R6WB01#
0.ꢀpF GJM0334C1E1R6BB01#
0.25pF GJM0334C1E1R6CB01#
0.05pF GJM0334C1E1R7WB01#
0.ꢀpF GJM0334C1E1R7BB01#
0.25pF GJM0334C1E1R7CB01#
0.05pF GJM0334C1E1R8WB01#
0.ꢀpF GJM0334C1E1R8BB01#
0.25pF GJM0334C1E1R8CB01#
0.05pF GJM0334C1E1R9WB01#
0.ꢀpF GJM0334C1E1R9BB01#
0.25pF GJM0334C1E1R9CB01#
0.05pF GJM0334C1E2R0WB01#
0.ꢀpF GJM0334C1E2R0BB01#
ꢀ.ꢀpF
ꢀ.2pF
ꢀ.3pF
ꢀ.4pF
ꢀ.5pF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
2.0pF
ꢀ0pF
ꢀꢀpF
ꢀ2pF
ꢀ3pF
ꢀ5pF
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
GJM0336C1E100GB01#
GJM0336C1E100JB01#
GJM0336C1E110GB01#
GJM0336C1E110JB01#
GJM0336C1E120GB01#
GJM0336C1E120JB01#
GJM0336C1E130GB01#
GJM0336C1E130JB01#
GJM0336C1E150GB01#
GJM0336C1E150JB01#
Part number # indicates the package specification code.
92
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 25Vdc CK
CJ
2.0pF
2.1pF
0.25pF GJM0334C1E2R0CB01#
0.05pF GJM0333C1E2R1WB01#
0.1pF GJM0333C1E2R1BB01#
0.25pF GJM0333C1E2R1CB01#
0.05pF GJM0333C1E2R2WB01#
0.1pF GJM0333C1E2R2BB01#
0.25pF GJM0333C1E2R2CB01#
0.05pF GJM0333C1E2R3WB01#
0.1pF GJM0333C1E2R3BB01#
0.25pF GJM0333C1E2R3CB01#
0.05pF GJM0333C1E2R4WB01#
0.1pF GJM0333C1E2R4BB01#
0.25pF GJM0333C1E2R4CB01#
0.05pF GJM0333C1E2R5WB01#
0.1pF GJM0333C1E2R5BB01#
0.25pF GJM0333C1E2R5CB01#
0.05pF GJM0333C1E2R6WB01#
0.1pF GJM0333C1E2R6BB01#
0.25pF GJM0333C1E2R6CB01#
0.05pF GJM0333C1E2R7WB01#
0.1pF GJM0333C1E2R7BB01#
0.25pF GJM0333C1E2R7CB01#
0.05pF GJM0333C1E2R8WB01#
0.1pF GJM0333C1E2R8BB01#
0.25pF GJM0333C1E2R8CB01#
0.05pF GJM0333C1E2R9WB01#
0.1pF GJM0333C1E2R9BB01#
0.25pF GJM0333C1E2R9CB01#
0.05pF GJM0333C1E3R0WB01#
0.1pF GJM0333C1E3R0BB01#
0.25pF GJM0333C1E3R0CB01#
0.05pF GJM0333C1E3R1WB01#
0.1pF GJM0333C1E3R1BB01#
0.25pF GJM0333C1E3R1CB01#
0.05pF GJM0333C1E3R2WB01#
0.1pF GJM0333C1E3R2BB01#
0.25pF GJM0333C1E3R2CB01#
0.05pF GJM0333C1E3R3WB01#
0.1pF GJM0333C1E3R3BB01#
0.25pF GJM0333C1E3R3CB01#
0.05pF GJM0333C1E3R4WB01#
0.1pF GJM0333C1E3R4BB01#
0.25pF GJM0333C1E3R4CB01#
0.05pF GJM0333C1E3R5WB01#
0.1pF GJM0333C1E3R5BB01#
0.25pF GJM0333C1E3R5CB01#
0.05pF GJM0333C1E3R6WB01#
0.1pF GJM0333C1E3R6BB01#
0.25pF GJM0333C1E3R6CB01#
0.05pF GJM0333C1E3R7WB01#
0.1pF GJM0333C1E3R7BB01#
0.25pF GJM0333C1E3R7CB01#
0.05pF GJM0333C1E3R8WB01#
0.1pF GJM0333C1E3R8BB01#
0.33mm 25Vdc
CJ
3.8pF
3.9pF
0.25pF GJM0333C1E3R8CB01#
0.05pF GJM0333C1E3R9WB01#
0.1pF GJM0333C1E3R9BB01#
0.25pF GJM0333C1E3R9CB01#
0.05pF GJM0332C1E4R0WB01#
0.1pF GJM0332C1E4R0BB01#
0.25pF GJM0332C1E4R0CB01#
0.05pF GJM0332C1E4R1WB01#
0.1pF GJM0332C1E4R1BB01#
0.25pF GJM0332C1E4R1CB01#
0.05pF GJM0332C1E4R2WB01#
0.1pF GJM0332C1E4R2BB01#
0.25pF GJM0332C1E4R2CB01#
0.05pF GJM0332C1E4R3WB01#
0.1pF GJM0332C1E4R3BB01#
0.25pF GJM0332C1E4R3CB01#
0.05pF GJM0332C1E4R4WB01#
0.1pF GJM0332C1E4R4BB01#
0.25pF GJM0332C1E4R4CB01#
0.05pF GJM0332C1E4R5WB01#
0.1pF GJM0332C1E4R5BB01#
0.25pF GJM0332C1E4R5CB01#
0.05pF GJM0332C1E4R6WB01#
0.1pF GJM0332C1E4R6BB01#
0.25pF GJM0332C1E4R6CB01#
0.05pF GJM0332C1E4R7WB01#
0.1pF GJM0332C1E4R7BB01#
0.25pF GJM0332C1E4R7CB01#
0.05pF GJM0332C1E4R8WB01#
0.1pF GJM0332C1E4R8BB01#
0.25pF GJM0332C1E4R8CB01#
0.05pF GJM0332C1E4R9WB01#
0.1pF GJM0332C1E4R9BB01#
0.25pF GJM0332C1E4R9CB01#
0.05pF GJM0332C1E5R0WB01#
0.1pF GJM0332C1E5R0BB01#
0.25pF GJM0332C1E5R0CB01#
0.05pF GJM0332C1E5R1WB01#
0.1pF GJM0332C1E5R1BB01#
0.25pF GJM0332C1E5R1CB01#
0.5pF GJM0332C1E5R1DB01#
0.05pF GJM0332C1E5R2WB01#
0.1pF GJM0332C1E5R2BB01#
0.25pF GJM0332C1E5R2CB01#
0.5pF GJM0332C1E5R2DB01#
0.05pF GJM0332C1E5R3WB01#
0.1pF GJM0332C1E5R3BB01#
0.25pF GJM0332C1E5R3CB01#
0.5pF GJM0332C1E5R3DB01#
0.05pF GJM0332C1E5R4WB01#
0.1pF GJM0332C1E5R4BB01#
0.25pF GJM0332C1E5R4CB01#
0.5pF GJM0332C1E5R4DB01#
0.05pF GJM0332C1E5R5WB01#
2.2pF
2.3pF
2.4pF
2.5pF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
CH
4.0pF
4.1pF
4.2pF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
5.1pF
5.2pF
5.3pF
5.4pF
5.5pF
Part number # indicates the package specification code.
93
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 25Vdc CH
5.5pF
0.ꢀpF GJM0332C1E5R5BB01#
0.25pF GJM0332C1E5R5CB01#
0.5pF GJM0332C1E5R5DB01#
0.05pF GJM0332C1E5R6WB01#
0.ꢀpF GJM0332C1E5R6BB01#
0.25pF GJM0332C1E5R6CB01#
0.5pF GJM0332C1E5R6DB01#
0.05pF GJM0332C1E5R7WB01#
0.ꢀpF GJM0332C1E5R7BB01#
0.25pF GJM0332C1E5R7CB01#
0.5pF GJM0332C1E5R7DB01#
0.05pF GJM0332C1E5R8WB01#
0.ꢀpF GJM0332C1E5R8BB01#
0.25pF GJM0332C1E5R8CB01#
0.5pF GJM0332C1E5R8DB01#
0.05pF GJM0332C1E5R9WB01#
0.ꢀpF GJM0332C1E5R9BB01#
0.25pF GJM0332C1E5R9CB01#
0.5pF GJM0332C1E5R9DB01#
0.05pF GJM0332C1E6R0WB01#
0.ꢀpF GJM0332C1E6R0BB01#
0.25pF GJM0332C1E6R0CB01#
0.5pF GJM0332C1E6R0DB01#
0.05pF GJM0332C1E6R1WB01#
0.ꢀpF GJM0332C1E6R1BB01#
0.25pF GJM0332C1E6R1CB01#
0.5pF GJM0332C1E6R1DB01#
0.05pF GJM0332C1E6R2WB01#
0.ꢀpF GJM0332C1E6R2BB01#
0.25pF GJM0332C1E6R2CB01#
0.5pF GJM0332C1E6R2DB01#
0.05pF GJM0332C1E6R3WB01#
0.ꢀpF GJM0332C1E6R3BB01#
0.25pF GJM0332C1E6R3CB01#
0.5pF GJM0332C1E6R3DB01#
0.05pF GJM0332C1E6R4WB01#
0.ꢀpF GJM0332C1E6R4BB01#
0.25pF GJM0332C1E6R4CB01#
0.5pF GJM0332C1E6R4DB01#
0.05pF GJM0332C1E6R5WB01#
0.ꢀpF GJM0332C1E6R5BB01#
0.25pF GJM0332C1E6R5CB01#
0.5pF GJM0332C1E6R5DB01#
0.05pF GJM0332C1E6R6WB01#
0.ꢀpF GJM0332C1E6R6BB01#
0.25pF GJM0332C1E6R6CB01#
0.5pF GJM0332C1E6R6DB01#
0.05pF GJM0332C1E6R7WB01#
0.ꢀpF GJM0332C1E6R7BB01#
0.25pF GJM0332C1E6R7CB01#
0.5pF GJM0332C1E6R7DB01#
0.05pF GJM0332C1E6R8WB01#
0.ꢀpF GJM0332C1E6R8BB01#
0.25pF GJM0332C1E6R8CB01#
0.33mm 25Vdc CH
6.8pF
6.9pF
0.5pF GJM0332C1E6R8DB01#
0.05pF GJM0332C1E6R9WB01#
0.ꢀpF GJM0332C1E6R9BB01#
0.25pF GJM0332C1E6R9CB01#
0.5pF GJM0332C1E6R9DB01#
0.05pF GJM0332C1E7R0WB01#
0.ꢀpF GJM0332C1E7R0BB01#
0.25pF GJM0332C1E7R0CB01#
0.5pF GJM0332C1E7R0DB01#
0.05pF GJM0332C1E7R1WB01#
0.ꢀpF GJM0332C1E7R1BB01#
0.25pF GJM0332C1E7R1CB01#
0.5pF GJM0332C1E7R1DB01#
0.05pF GJM0332C1E7R2WB01#
0.ꢀpF GJM0332C1E7R2BB01#
0.25pF GJM0332C1E7R2CB01#
0.5pF GJM0332C1E7R2DB01#
0.05pF GJM0332C1E7R3WB01#
0.ꢀpF GJM0332C1E7R3BB01#
0.25pF GJM0332C1E7R3CB01#
0.5pF GJM0332C1E7R3DB01#
0.05pF GJM0332C1E7R4WB01#
0.ꢀpF GJM0332C1E7R4BB01#
0.25pF GJM0332C1E7R4CB01#
0.5pF GJM0332C1E7R4DB01#
0.05pF GJM0332C1E7R5WB01#
0.ꢀpF GJM0332C1E7R5BB01#
0.25pF GJM0332C1E7R5CB01#
0.5pF GJM0332C1E7R5DB01#
0.05pF GJM0332C1E7R6WB01#
0.ꢀpF GJM0332C1E7R6BB01#
0.25pF GJM0332C1E7R6CB01#
0.5pF GJM0332C1E7R6DB01#
0.05pF GJM0332C1E7R7WB01#
0.ꢀpF GJM0332C1E7R7BB01#
0.25pF GJM0332C1E7R7CB01#
0.5pF GJM0332C1E7R7DB01#
0.05pF GJM0332C1E7R8WB01#
0.ꢀpF GJM0332C1E7R8BB01#
0.25pF GJM0332C1E7R8CB01#
0.5pF GJM0332C1E7R8DB01#
0.05pF GJM0332C1E7R9WB01#
0.ꢀpF GJM0332C1E7R9BB01#
0.25pF GJM0332C1E7R9CB01#
0.5pF GJM0332C1E7R9DB01#
0.05pF GJM0332C1E8R0WB01#
0.ꢀpF GJM0332C1E8R0BB01#
0.25pF GJM0332C1E8R0CB01#
0.5pF GJM0332C1E8R0DB01#
0.05pF GJM0332C1E8R1WB01#
0.ꢀpF GJM0332C1E8R1BB01#
0.25pF GJM0332C1E8R1CB01#
0.5pF GJM0332C1E8R1DB01#
0.05pF GJM0332C1E8R2WB01#
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
6.2pF
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
7.0pF
7.ꢀpF
7.2pF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.ꢀpF
8.2pF
Part number # indicates the package specification code.
94
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
0.6×0.3mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.33mm 25Vdc CH
8.2pF
0.ꢀpF GJM0332C1E8R2BB01#
0.25pF GJM0332C1E8R2CB01#
0.5pF GJM0332C1E8R2DB01#
0.05pF GJM0332C1E8R3WB01#
0.ꢀpF GJM0332C1E8R3BB01#
0.25pF GJM0332C1E8R3CB01#
0.5pF GJM0332C1E8R3DB01#
0.05pF GJM0332C1E8R4WB01#
0.ꢀpF GJM0332C1E8R4BB01#
0.25pF GJM0332C1E8R4CB01#
0.5pF GJM0332C1E8R4DB01#
0.05pF GJM0332C1E8R5WB01#
0.ꢀpF GJM0332C1E8R5BB01#
0.25pF GJM0332C1E8R5CB01#
0.5pF GJM0332C1E8R5DB01#
0.05pF GJM0332C1E8R6WB01#
0.ꢀpF GJM0332C1E8R6BB01#
0.25pF GJM0332C1E8R6CB01#
0.5pF GJM0332C1E8R6DB01#
0.05pF GJM0332C1E8R7WB01#
0.ꢀpF GJM0332C1E8R7BB01#
0.25pF GJM0332C1E8R7CB01#
0.5pF GJM0332C1E8R7DB01#
0.05pF GJM0332C1E8R8WB01#
0.ꢀpF GJM0332C1E8R8BB01#
0.25pF GJM0332C1E8R8CB01#
0.5pF GJM0332C1E8R8DB01#
0.05pF GJM0332C1E8R9WB01#
0.ꢀpF GJM0332C1E8R9BB01#
0.25pF GJM0332C1E8R9CB01#
0.5pF GJM0332C1E8R9DB01#
0.05pF GJM0332C1E9R0WB01#
0.ꢀpF GJM0332C1E9R0BB01#
0.25pF GJM0332C1E9R0CB01#
0.5pF GJM0332C1E9R0DB01#
0.05pF GJM0332C1E9R1WB01#
0.ꢀpF GJM0332C1E9R1BB01#
0.25pF GJM0332C1E9R1CB01#
0.5pF GJM0332C1E9R1DB01#
0.05pF GJM0332C1E9R2WB01#
0.ꢀpF GJM0332C1E9R2BB01#
0.25pF GJM0332C1E9R2CB01#
0.5pF GJM0332C1E9R2DB01#
0.05pF GJM0332C1E9R3WB01#
0.ꢀpF GJM0332C1E9R3BB01#
0.25pF GJM0332C1E9R3CB01#
0.5pF GJM0332C1E9R3DB01#
0.05pF GJM0332C1E9R4WB01#
0.ꢀpF GJM0332C1E9R4BB01#
0.25pF GJM0332C1E9R4CB01#
0.5pF GJM0332C1E9R4DB01#
0.05pF GJM0332C1E9R5WB01#
0.ꢀpF GJM0332C1E9R5BB01#
0.25pF GJM0332C1E9R5CB01#
0.33mm 25Vdc CH
9.5pF
9.6pF
0.5pF GJM0332C1E9R5DB01#
0.05pF GJM0332C1E9R6WB01#
0.ꢀpF GJM0332C1E9R6BB01#
0.25pF GJM0332C1E9R6CB01#
0.5pF GJM0332C1E9R6DB01#
0.05pF GJM0332C1E9R7WB01#
0.ꢀpF GJM0332C1E9R7BB01#
0.25pF GJM0332C1E9R7CB01#
0.5pF GJM0332C1E9R7DB01#
0.05pF GJM0332C1E9R8WB01#
0.ꢀpF GJM0332C1E9R8BB01#
0.25pF GJM0332C1E9R8CB01#
0.5pF GJM0332C1E9R8DB01#
0.05pF GJM0332C1E9R9WB01#
0.ꢀpF GJM0332C1E9R9BB01#
0.25pF GJM0332C1E9R9CB01#
0.5pF GJM0332C1E9R9DB01#
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.ꢀpF
9.2pF
9.3pF
9.4pF
9.5pF
9.7pF
9.8pF
9.9pF
ꢀ0pF
ꢀꢀpF
ꢀ2pF
ꢀ3pF
ꢀ5pF
ꢀ6pF
ꢀ8pF
20pF
22pF
24pF
27pF
30pF
33pF
22pF
24pF
27pF
30pF
33pF
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
GJM0332C1E100GB01#
GJM0332C1E100JB01#
GJM0332C1E110GB01#
GJM0332C1E110JB01#
GJM0332C1E120GB01#
GJM0332C1E120JB01#
GJM0332C1E130GB01#
GJM0332C1E130JB01#
GJM0332C1E150GB01#
GJM0332C1E150JB01#
GJM0332C1E160GB01#
GJM0332C1E160JB01#
GJM0332C1E180GB01#
GJM0332C1E180JB01#
GJM0332C1E200GB01#
GJM0332C1E200JB01#
GJM0335C0J220GB01#
GJM0335C0J220JB01#
GJM0335C0J240GB01#
GJM0335C0J240JB01#
GJM0335C0J270GB01#
GJM0335C0J270JB01#
GJM0335C0J300GB01#
GJM0335C0J300JB01#
GJM0335C0J330GB01#
GJM0335C0J330JB01#
GJM0332C0J220GB01#
GJM0332C0J220JB01#
GJM0332C0J240GB01#
GJM0332C0J240JB01#
GJM0332C0J270GB01#
GJM0332C0J270JB01#
GJM0332C0J300GB01#
GJM0332C0J300JB01#
GJM0332C0J330GB01#
GJM0332C0J330JB01#
6.3Vdc C0G
CH
Part number # indicates the package specification code.
95
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
T
Rated
TC
Cap.
Tol.
Part Number
1.0×0.5mm
c
max. Voltage Code
0.55mm 50Vdc C0G 2.1pF
2.2pF
0.1pF GJM1555C1H2R1BB01#
0.25pF GJM1555C1H2R1CB01#
0.05pF GJM1555C1H2R2WB01#
0.1pF GJM1555C1H2R2BB01#
0.25pF GJM1555C1H2R2CB01#
0.05pF GJM1555C1H2R3WB01#
0.1pF GJM1555C1H2R3BB01#
0.25pF GJM1555C1H2R3CB01#
0.05pF GJM1555C1H2R4WB01#
0.1pF GJM1555C1H2R4BB01#
0.25pF GJM1555C1H2R4CB01#
0.05pF GJM1555C1H2R5WB01#
0.1pF GJM1555C1H2R5BB01#
0.25pF GJM1555C1H2R5CB01#
0.05pF GJM1555C1H2R6WB01#
0.1pF GJM1555C1H2R6BB01#
0.25pF GJM1555C1H2R6CB01#
0.05pF GJM1555C1H2R7WB01#
0.1pF GJM1555C1H2R7BB01#
0.25pF GJM1555C1H2R7CB01#
0.05pF GJM1555C1H2R8WB01#
0.1pF GJM1555C1H2R8BB01#
0.25pF GJM1555C1H2R8CB01#
0.05pF GJM1555C1H2R9WB01#
0.1pF GJM1555C1H2R9BB01#
0.25pF GJM1555C1H2R9CB01#
0.05pF GJM1555C1H3R0WB01#
0.1pF GJM1555C1H3R0BB01#
0.25pF GJM1555C1H3R0CB01#
0.05pF GJM1555C1H3R1WB01#
0.1pF GJM1555C1H3R1BB01#
0.25pF GJM1555C1H3R1CB01#
0.05pF GJM1555C1H3R2WB01#
0.1pF GJM1555C1H3R2BB01#
0.25pF GJM1555C1H3R2CB01#
0.05pF GJM1555C1H3R3WB01#
0.1pF GJM1555C1H3R3BB01#
0.25pF GJM1555C1H3R3CB01#
0.05pF GJM1555C1H3R4WB01#
0.1pF GJM1555C1H3R4BB01#
0.25pF GJM1555C1H3R4CB01#
0.05pF GJM1555C1H3R5WB01#
0.1pF GJM1555C1H3R5BB01#
0.25pF GJM1555C1H3R5CB01#
0.05pF GJM1555C1H3R6WB01#
0.1pF GJM1555C1H3R6BB01#
0.25pF GJM1555C1H3R6CB01#
0.05pF GJM1555C1H3R7WB01#
0.1pF GJM1555C1H3R7BB01#
0.25pF GJM1555C1H3R7CB01#
0.05pF GJM1555C1H3R8WB01#
0.1pF GJM1555C1H3R8BB01#
0.25pF GJM1555C1H3R8CB01#
0.05pF GJM1555C1H3R9WB01#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm 50Vdc C0G 0.1pF
0.05pF GJM1555C1HR10WB01#
0.1pF GJM1555C1HR10BB01#
0.05pF GJM1555C1HR20WB01#
0.1pF GJM1555C1HR20BB01#
0.05pF GJM1555C1HR30WB01#
0.1pF GJM1555C1HR30BB01#
0.05pF GJM1555C1HR40WB01#
0.1pF GJM1555C1HR40BB01#
0.05pF GJM1555C1HR50WB01#
0.1pF GJM1555C1HR50BB01#
0.05pF GJM1555C1HR60WB01#
0.1pF GJM1555C1HR60BB01#
0.05pF GJM1555C1HR70WB01#
0.1pF GJM1555C1HR70BB01#
0.05pF GJM1555C1HR80WB01#
0.1pF GJM1555C1HR80BB01#
0.05pF GJM1555C1HR90WB01#
0.1pF GJM1555C1HR90BB01#
0.05pF GJM1555C1H1R0WB01#
0.1pF GJM1555C1H1R0BB01#
0.25pF GJM1555C1H1R0CB01#
0.05pF GJM1555C1H1R1WB01#
0.1pF GJM1555C1H1R1BB01#
0.25pF GJM1555C1H1R1CB01#
0.05pF GJM1555C1H1R2WB01#
0.1pF GJM1555C1H1R2BB01#
0.25pF GJM1555C1H1R2CB01#
0.05pF GJM1555C1H1R3WB01#
0.1pF GJM1555C1H1R3BB01#
0.25pF GJM1555C1H1R3CB01#
0.05pF GJM1555C1H1R4WB01#
0.1pF GJM1555C1H1R4BB01#
0.25pF GJM1555C1H1R4CB01#
0.05pF GJM1555C1H1R5WB01#
0.1pF GJM1555C1H1R5BB01#
0.25pF GJM1555C1H1R5CB01#
0.05pF GJM1555C1H1R6WB01#
0.1pF GJM1555C1H1R6BB01#
0.25pF GJM1555C1H1R6CB01#
0.05pF GJM1555C1H1R7WB01#
0.1pF GJM1555C1H1R7BB01#
0.25pF GJM1555C1H1R7CB01#
0.05pF GJM1555C1H1R8WB01#
0.1pF GJM1555C1H1R8BB01#
0.25pF GJM1555C1H1R8CB01#
0.05pF GJM1555C1H1R9WB01#
0.1pF GJM1555C1H1R9BB01#
0.25pF GJM1555C1H1R9CB01#
0.05pF GJM1555C1H2R0WB01#
0.1pF GJM1555C1H2R0BB01#
0.25pF GJM1555C1H2R0CB01#
0.05pF GJM1555C1H2R1WB01#
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
2.3pF
2.4pF
2.5pF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
3.9pF
1.1pF
1.2pF
1.3pF
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
Part number # indicates the package specification code.
96
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc C0G 3.9pF
4.0pF
0.ꢀpF GJM1555C1H3R9BB01#
0.ꢁ5pF GJM1555C1H3R9CB01#
0.05pF GJM1555C1H4R0WB01#
0.ꢀpF GJM1555C1H4R0BB01#
0.ꢁ5pF GJM1555C1H4R0CB01#
0.05pF GJM1555C1H4R1WB01#
0.ꢀpF GJM1555C1H4R1BB01#
0.ꢁ5pF GJM1555C1H4R1CB01#
0.05pF GJM1555C1H4R2WB01#
0.ꢀpF GJM1555C1H4R2BB01#
0.ꢁ5pF GJM1555C1H4R2CB01#
0.05pF GJM1555C1H4R3WB01#
0.ꢀpF GJM1555C1H4R3BB01#
0.ꢁ5pF GJM1555C1H4R3CB01#
0.05pF GJM1555C1H4R4WB01#
0.ꢀpF GJM1555C1H4R4BB01#
0.ꢁ5pF GJM1555C1H4R4CB01#
0.05pF GJM1555C1H4R5WB01#
0.ꢀpF GJM1555C1H4R5BB01#
0.ꢁ5pF GJM1555C1H4R5CB01#
0.05pF GJM1555C1H4R6WB01#
0.ꢀpF GJM1555C1H4R6BB01#
0.ꢁ5pF GJM1555C1H4R6CB01#
0.05pF GJM1555C1H4R7WB01#
0.ꢀpF GJM1555C1H4R7BB01#
0.ꢁ5pF GJM1555C1H4R7CB01#
0.05pF GJM1555C1H4R8WB01#
0.ꢀpF GJM1555C1H4R8BB01#
0.ꢁ5pF GJM1555C1H4R8CB01#
0.05pF GJM1555C1H4R9WB01#
0.ꢀpF GJM1555C1H4R9BB01#
0.ꢁ5pF GJM1555C1H4R9CB01#
0.05pF GJM1555C1H5R0WB01#
0.ꢀpF GJM1555C1H5R0BB01#
0.ꢁ5pF GJM1555C1H5R0CB01#
0.05pF GJM1555C1H5R1WB01#
0.ꢀpF GJM1555C1H5R1BB01#
0.ꢁ5pF GJM1555C1H5R1CB01#
0.5pF GJM1555C1H5R1DB01#
0.05pF GJM1555C1H5R2WB01#
0.ꢀpF GJM1555C1H5R2BB01#
0.ꢁ5pF GJM1555C1H5R2CB01#
0.5pF GJM1555C1H5R2DB01#
0.05pF GJM1555C1H5R3WB01#
0.ꢀpF GJM1555C1H5R3BB01#
0.ꢁ5pF GJM1555C1H5R3CB01#
0.5pF GJM1555C1H5R3DB01#
0.05pF GJM1555C1H5R4WB01#
0.ꢀpF GJM1555C1H5R4BB01#
0.ꢁ5pF GJM1555C1H5R4CB01#
0.5pF GJM1555C1H5R4DB01#
0.05pF GJM1555C1H5R5WB01#
0.ꢀpF GJM1555C1H5R5BB01#
0.ꢁ5pF GJM1555C1H5R5CB01#
0.55mm 50Vdc C0G 5.5pF
5.6pF
0.5pF GJM1555C1H5R5DB01#
0.05pF GJM1555C1H5R6WB01#
0.ꢀpF GJM1555C1H5R6BB01#
0.ꢁ5pF GJM1555C1H5R6CB01#
0.5pF GJM1555C1H5R6DB01#
0.05pF GJM1555C1H5R7WB01#
0.ꢀpF GJM1555C1H5R7BB01#
0.ꢁ5pF GJM1555C1H5R7CB01#
0.5pF GJM1555C1H5R7DB01#
0.05pF GJM1555C1H5R8WB01#
0.ꢀpF GJM1555C1H5R8BB01#
0.ꢁ5pF GJM1555C1H5R8CB01#
0.5pF GJM1555C1H5R8DB01#
0.05pF GJM1555C1H5R9WB01#
0.ꢀpF GJM1555C1H5R9BB01#
0.ꢁ5pF GJM1555C1H5R9CB01#
0.5pF GJM1555C1H5R9DB01#
0.05pF GJM1555C1H6R0WB01#
0.ꢀpF GJM1555C1H6R0BB01#
0.ꢁ5pF GJM1555C1H6R0CB01#
0.5pF GJM1555C1H6R0DB01#
0.05pF GJM1555C1H6R1WB01#
0.ꢀpF GJM1555C1H6R1BB01#
0.ꢁ5pF GJM1555C1H6R1CB01#
0.5pF GJM1555C1H6R1DB01#
0.05pF GJM1555C1H6R2WB01#
0.ꢀpF GJM1555C1H6R2BB01#
0.ꢁ5pF GJM1555C1H6R2CB01#
0.5pF GJM1555C1H6R2DB01#
0.05pF GJM1555C1H6R3WB01#
0.ꢀpF GJM1555C1H6R3BB01#
0.ꢁ5pF GJM1555C1H6R3CB01#
0.5pF GJM1555C1H6R3DB01#
0.05pF GJM1555C1H6R4WB01#
0.ꢀpF GJM1555C1H6R4BB01#
0.ꢁ5pF GJM1555C1H6R4CB01#
0.5pF GJM1555C1H6R4DB01#
0.05pF GJM1555C1H6R5WB01#
0.ꢀpF GJM1555C1H6R5BB01#
0.ꢁ5pF GJM1555C1H6R5CB01#
0.5pF GJM1555C1H6R5DB01#
0.05pF GJM1555C1H6R6WB01#
0.ꢀpF GJM1555C1H6R6BB01#
0.ꢁ5pF GJM1555C1H6R6CB01#
0.5pF GJM1555C1H6R6DB01#
0.05pF GJM1555C1H6R7WB01#
0.ꢀpF GJM1555C1H6R7BB01#
0.ꢁ5pF GJM1555C1H6R7CB01#
0.5pF GJM1555C1H6R7DB01#
0.05pF GJM1555C1H6R8WB01#
0.ꢀpF GJM1555C1H6R8BB01#
0.ꢁ5pF GJM1555C1H6R8CB01#
0.5pF GJM1555C1H6R8DB01#
0.05pF GJM1555C1H6R9WB01#
4.ꢀpF
4.ꢁpF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
5.ꢀpF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
6.ꢁpF
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
6.9pF
5.ꢁpF
5.3pF
5.4pF
5.5pF
Part number # indicates the package specification code.
97
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc C0G 6.9pF
0.ꢀpF GJM1555C1H6R9BB01#
0.ꢁ5pF GJM1555C1H6R9CB01#
0.5pF GJM1555C1H6R9DB01#
0.05pF GJM1555C1H7R0WB01#
0.ꢀpF GJM1555C1H7R0BB01#
0.ꢁ5pF GJM1555C1H7R0CB01#
0.5pF GJM1555C1H7R0DB01#
0.05pF GJM1555C1H7R1WB01#
0.ꢀpF GJM1555C1H7R1BB01#
0.ꢁ5pF GJM1555C1H7R1CB01#
0.5pF GJM1555C1H7R1DB01#
0.05pF GJM1555C1H7R2WB01#
0.ꢀpF GJM1555C1H7R2BB01#
0.ꢁ5pF GJM1555C1H7R2CB01#
0.5pF GJM1555C1H7R2DB01#
0.05pF GJM1555C1H7R3WB01#
0.ꢀpF GJM1555C1H7R3BB01#
0.ꢁ5pF GJM1555C1H7R3CB01#
0.5pF GJM1555C1H7R3DB01#
0.05pF GJM1555C1H7R4WB01#
0.ꢀpF GJM1555C1H7R4BB01#
0.ꢁ5pF GJM1555C1H7R4CB01#
0.5pF GJM1555C1H7R4DB01#
0.05pF GJM1555C1H7R5WB01#
0.ꢀpF GJM1555C1H7R5BB01#
0.ꢁ5pF GJM1555C1H7R5CB01#
0.5pF GJM1555C1H7R5DB01#
0.05pF GJM1555C1H7R6WB01#
0.ꢀpF GJM1555C1H7R6BB01#
0.ꢁ5pF GJM1555C1H7R6CB01#
0.5pF GJM1555C1H7R6DB01#
0.05pF GJM1555C1H7R7WB01#
0.ꢀpF GJM1555C1H7R7BB01#
0.ꢁ5pF GJM1555C1H7R7CB01#
0.5pF GJM1555C1H7R7DB01#
0.05pF GJM1555C1H7R8WB01#
0.ꢀpF GJM1555C1H7R8BB01#
0.ꢁ5pF GJM1555C1H7R8CB01#
0.5pF GJM1555C1H7R8DB01#
0.05pF GJM1555C1H7R9WB01#
0.ꢀpF GJM1555C1H7R9BB01#
0.ꢁ5pF GJM1555C1H7R9CB01#
0.5pF GJM1555C1H7R9DB01#
0.05pF GJM1555C1H8R0WB01#
0.ꢀpF GJM1555C1H8R0BB01#
0.ꢁ5pF GJM1555C1H8R0CB01#
0.5pF GJM1555C1H8R0DB01#
0.05pF GJM1555C1H8R1WB01#
0.ꢀpF GJM1555C1H8R1BB01#
0.ꢁ5pF GJM1555C1H8R1CB01#
0.5pF GJM1555C1H8R1DB01#
0.05pF GJM1555C1H8R2WB01#
0.ꢀpF GJM1555C1H8R2BB01#
0.ꢁ5pF GJM1555C1H8R2CB01#
0.55mm 50Vdc C0G 8.ꢁpF
8.3pF
0.5pF GJM1555C1H8R2DB01#
0.05pF GJM1555C1H8R3WB01#
0.ꢀpF GJM1555C1H8R3BB01#
0.ꢁ5pF GJM1555C1H8R3CB01#
0.5pF GJM1555C1H8R3DB01#
0.05pF GJM1555C1H8R4WB01#
0.ꢀpF GJM1555C1H8R4BB01#
0.ꢁ5pF GJM1555C1H8R4CB01#
0.5pF GJM1555C1H8R4DB01#
0.05pF GJM1555C1H8R5WB01#
0.ꢀpF GJM1555C1H8R5BB01#
0.ꢁ5pF GJM1555C1H8R5CB01#
0.5pF GJM1555C1H8R5DB01#
0.05pF GJM1555C1H8R6WB01#
0.ꢀpF GJM1555C1H8R6BB01#
0.ꢁ5pF GJM1555C1H8R6CB01#
0.5pF GJM1555C1H8R6DB01#
0.05pF GJM1555C1H8R7WB01#
0.ꢀpF GJM1555C1H8R7BB01#
0.ꢁ5pF GJM1555C1H8R7CB01#
0.5pF GJM1555C1H8R7DB01#
0.05pF GJM1555C1H8R8WB01#
0.ꢀpF GJM1555C1H8R8BB01#
0.ꢁ5pF GJM1555C1H8R8CB01#
0.5pF GJM1555C1H8R8DB01#
0.05pF GJM1555C1H8R9WB01#
0.ꢀpF GJM1555C1H8R9BB01#
0.ꢁ5pF GJM1555C1H8R9CB01#
0.5pF GJM1555C1H8R9DB01#
0.05pF GJM1555C1H9R0WB01#
0.ꢀpF GJM1555C1H9R0BB01#
0.ꢁ5pF GJM1555C1H9R0CB01#
0.5pF GJM1555C1H9R0DB01#
0.05pF GJM1555C1H9R1WB01#
0.ꢀpF GJM1555C1H9R1BB01#
0.ꢁ5pF GJM1555C1H9R1CB01#
0.5pF GJM1555C1H9R1DB01#
0.05pF GJM1555C1H9R2WB01#
0.ꢀpF GJM1555C1H9R2BB01#
0.ꢁ5pF GJM1555C1H9R2CB01#
0.5pF GJM1555C1H9R2DB01#
0.05pF GJM1555C1H9R3WB01#
0.ꢀpF GJM1555C1H9R3BB01#
0.ꢁ5pF GJM1555C1H9R3CB01#
0.5pF GJM1555C1H9R3DB01#
0.05pF GJM1555C1H9R4WB01#
0.ꢀpF GJM1555C1H9R4BB01#
0.ꢁ5pF GJM1555C1H9R4CB01#
0.5pF GJM1555C1H9R4DB01#
0.05pF GJM1555C1H9R5WB01#
0.ꢀpF GJM1555C1H9R5BB01#
0.ꢁ5pF GJM1555C1H9R5CB01#
0.5pF GJM1555C1H9R5DB01#
0.05pF GJM1555C1H9R6WB01#
7.0pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.ꢀpF
9.ꢁpF
9.3pF
9.4pF
9.5pF
9.6pF
7.ꢀpF
7.ꢁpF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.ꢀpF
8.ꢁpF
Part number # indicates the package specification code.
98
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc C0G 9.6pF
0.ꢀpF GJM1555C1H9R6BB01#
0.ꢁ5pF GJM1555C1H9R6CB01#
0.5pF GJM1555C1H9R6DB01#
0.05pF GJM1555C1H9R7WB01#
0.ꢀpF GJM1555C1H9R7BB01#
0.ꢁ5pF GJM1555C1H9R7CB01#
0.5pF GJM1555C1H9R7DB01#
0.05pF GJM1555C1H9R8WB01#
0.ꢀpF GJM1555C1H9R8BB01#
0.ꢁ5pF GJM1555C1H9R8CB01#
0.5pF GJM1555C1H9R8DB01#
0.05pF GJM1555C1H9R9WB01#
0.ꢀpF GJM1555C1H9R9BB01#
0.ꢁ5pF GJM1555C1H9R9CB01#
0.5pF GJM1555C1H9R9DB01#
0.55mm 50Vdc C0G
43pF
47pF
52
ꢀ2
ꢁ2
52
GJM1555C1H430JB01#
GJM1555C1H470FB01#
GJM1555C1H470GB01#
GJM1555C1H470JB01#
9.7pF
CK
0.ꢀpF
0.ꢁpF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
ꢀ.0pF
0.05pF GJM1554C1HR10WB01#
0.ꢀpF GJM1554C1HR10BB01#
0.05pF GJM1554C1HR20WB01#
0.ꢀpF GJM1554C1HR20BB01#
0.05pF GJM1554C1HR30WB01#
0.ꢀpF GJM1554C1HR30BB01#
0.05pF GJM1554C1HR40WB01#
0.ꢀpF GJM1554C1HR40BB01#
0.05pF GJM1554C1HR50WB01#
0.ꢀpF GJM1554C1HR50BB01#
0.05pF GJM1554C1HR60WB01#
0.ꢀpF GJM1554C1HR60BB01#
0.05pF GJM1554C1HR70WB01#
0.ꢀpF GJM1554C1HR70BB01#
0.05pF GJM1554C1HR80WB01#
0.ꢀpF GJM1554C1HR80BB01#
0.05pF GJM1554C1HR90WB01#
0.ꢀpF GJM1554C1HR90BB01#
0.05pF GJM1554C1H1R0WB01#
0.ꢀpF GJM1554C1H1R0BB01#
0.ꢁ5pF GJM1554C1H1R0CB01#
0.05pF GJM1554C1H1R1WB01#
0.ꢀpF GJM1554C1H1R1BB01#
0.ꢁ5pF GJM1554C1H1R1CB01#
0.05pF GJM1554C1H1R2WB01#
0.ꢀpF GJM1554C1H1R2BB01#
0.ꢁ5pF GJM1554C1H1R2CB01#
0.05pF GJM1554C1H1R3WB01#
0.ꢀpF GJM1554C1H1R3BB01#
0.ꢁ5pF GJM1554C1H1R3CB01#
0.05pF GJM1554C1H1R4WB01#
0.ꢀpF GJM1554C1H1R4BB01#
0.ꢁ5pF GJM1554C1H1R4CB01#
0.05pF GJM1554C1H1R5WB01#
0.ꢀpF GJM1554C1H1R5BB01#
0.ꢁ5pF GJM1554C1H1R5CB01#
0.05pF GJM1554C1H1R6WB01#
0.ꢀpF GJM1554C1H1R6BB01#
0.ꢁ5pF GJM1554C1H1R6CB01#
0.05pF GJM1554C1H1R7WB01#
0.ꢀpF GJM1554C1H1R7BB01#
0.ꢁ5pF GJM1554C1H1R7CB01#
0.05pF GJM1554C1H1R8WB01#
0.ꢀpF GJM1554C1H1R8BB01#
0.ꢁ5pF GJM1554C1H1R8CB01#
0.05pF GJM1554C1H1R9WB01#
0.ꢀpF GJM1554C1H1R9BB01#
0.ꢁ5pF GJM1554C1H1R9CB01#
0.05pF GJM1554C1H2R0WB01#
0.ꢀpF GJM1554C1H2R0BB01#
9.8pF
9.9pF
ꢀ0pF
ꢀꢀpF
ꢀꢁpF
ꢀ3pF
ꢀ5pF
ꢀ6pF
ꢀ8pF
ꢁ0pF
ꢁꢁpF
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢁ2
52
ꢀ2
ꢁ2
52
ꢀ2
ꢁ2
52
ꢀ2
ꢁ2
52
ꢀ2
ꢁ2
52
ꢀ2
ꢁ2
52
ꢀ2
ꢁ2
52
ꢀ2
ꢁ2
52
ꢀ2
ꢁ2
GJM1555C1H100GB01#
GJM1555C1H100JB01#
GJM1555C1H110GB01#
GJM1555C1H110JB01#
GJM1555C1H120GB01#
GJM1555C1H120JB01#
GJM1555C1H130GB01#
GJM1555C1H130JB01#
GJM1555C1H150GB01#
GJM1555C1H150JB01#
GJM1555C1H160GB01#
GJM1555C1H160JB01#
GJM1555C1H180GB01#
GJM1555C1H180JB01#
GJM1555C1H200GB01#
GJM1555C1H200JB01#
GJM1555C1H220FB01#
GJM1555C1H220GB01#
GJM1555C1H220JB01#
GJM1555C1H240FB01#
GJM1555C1H240GB01#
GJM1555C1H240JB01#
GJM1555C1H270FB01#
GJM1555C1H270GB01#
GJM1555C1H270JB01#
GJM1555C1H300FB01#
GJM1555C1H300GB01#
GJM1555C1H300JB01#
GJM1555C1H330FB01#
GJM1555C1H330GB01#
GJM1555C1H330JB01#
GJM1555C1H360FB01#
GJM1555C1H360GB01#
GJM1555C1H360JB01#
GJM1555C1H390FB01#
GJM1555C1H390GB01#
GJM1555C1H390JB01#
GJM1555C1H430FB01#
GJM1555C1H430GB01#
ꢀ.ꢀpF
ꢀ.ꢁpF
ꢀ.3pF
ꢀ.4pF
ꢀ.5pF
ꢀ.6pF
ꢀ.7pF
ꢀ.8pF
ꢀ.9pF
ꢁ.0pF
ꢁ4pF
ꢁ7pF
30pF
33pF
36pF
39pF
43pF
Part number # indicates the package specification code.
99
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc CK
CJ
2.0pF
2.1pF
0.25pF GJM1554C1H2R0CB01#
0.05pF GJM1553C1H2R1WB01#
0.1pF GJM1553C1H2R1BB01#
0.25pF GJM1553C1H2R1CB01#
0.05pF GJM1553C1H2R2WB01#
0.1pF GJM1553C1H2R2BB01#
0.25pF GJM1553C1H2R2CB01#
0.05pF GJM1553C1H2R3WB01#
0.1pF GJM1553C1H2R3BB01#
0.25pF GJM1553C1H2R3CB01#
0.05pF GJM1553C1H2R4WB01#
0.1pF GJM1553C1H2R4BB01#
0.25pF GJM1553C1H2R4CB01#
0.05pF GJM1553C1H2R5WB01#
0.1pF GJM1553C1H2R5BB01#
0.25pF GJM1553C1H2R5CB01#
0.05pF GJM1553C1H2R6WB01#
0.1pF GJM1553C1H2R6BB01#
0.25pF GJM1553C1H2R6CB01#
0.05pF GJM1553C1H2R7WB01#
0.1pF GJM1553C1H2R7BB01#
0.25pF GJM1553C1H2R7CB01#
0.05pF GJM1553C1H2R8WB01#
0.1pF GJM1553C1H2R8BB01#
0.25pF GJM1553C1H2R8CB01#
0.05pF GJM1553C1H2R9WB01#
0.1pF GJM1553C1H2R9BB01#
0.25pF GJM1553C1H2R9CB01#
0.05pF GJM1553C1H3R0WB01#
0.1pF GJM1553C1H3R0BB01#
0.25pF GJM1553C1H3R0CB01#
0.05pF GJM1553C1H3R1WB01#
0.1pF GJM1553C1H3R1BB01#
0.25pF GJM1553C1H3R1CB01#
0.05pF GJM1553C1H3R2WB01#
0.1pF GJM1553C1H3R2BB01#
0.25pF GJM1553C1H3R2CB01#
0.05pF GJM1553C1H3R3WB01#
0.1pF GJM1553C1H3R3BB01#
0.25pF GJM1553C1H3R3CB01#
0.05pF GJM1553C1H3R4WB01#
0.1pF GJM1553C1H3R4BB01#
0.25pF GJM1553C1H3R4CB01#
0.05pF GJM1553C1H3R5WB01#
0.1pF GJM1553C1H3R5BB01#
0.25pF GJM1553C1H3R5CB01#
0.05pF GJM1553C1H3R6WB01#
0.1pF GJM1553C1H3R6BB01#
0.25pF GJM1553C1H3R6CB01#
0.05pF GJM1553C1H3R7WB01#
0.1pF GJM1553C1H3R7BB01#
0.25pF GJM1553C1H3R7CB01#
0.05pF GJM1553C1H3R8WB01#
0.1pF GJM1553C1H3R8BB01#
0.55mm 50Vdc
CJ
3.8pF
3.9pF
0.25pF GJM1553C1H3R8CB01#
0.05pF GJM1553C1H3R9WB01#
0.1pF GJM1553C1H3R9BB01#
0.25pF GJM1553C1H3R9CB01#
0.05pF GJM1552C1H4R0WB01#
0.1pF GJM1552C1H4R0BB01#
0.25pF GJM1552C1H4R0CB01#
0.05pF GJM1552C1H4R1WB01#
0.1pF GJM1552C1H4R1BB01#
0.25pF GJM1552C1H4R1CB01#
0.05pF GJM1552C1H4R2WB01#
0.1pF GJM1552C1H4R2BB01#
0.25pF GJM1552C1H4R2CB01#
0.05pF GJM1552C1H4R3WB01#
0.1pF GJM1552C1H4R3BB01#
0.25pF GJM1552C1H4R3CB01#
0.05pF GJM1552C1H4R4WB01#
0.1pF GJM1552C1H4R4BB01#
0.25pF GJM1552C1H4R4CB01#
0.05pF GJM1552C1H4R5WB01#
0.1pF GJM1552C1H4R5BB01#
0.25pF GJM1552C1H4R5CB01#
0.05pF GJM1552C1H4R6WB01#
0.1pF GJM1552C1H4R6BB01#
0.25pF GJM1552C1H4R6CB01#
0.05pF GJM1552C1H4R7WB01#
0.1pF GJM1552C1H4R7BB01#
0.25pF GJM1552C1H4R7CB01#
0.05pF GJM1552C1H4R8WB01#
0.1pF GJM1552C1H4R8BB01#
0.25pF GJM1552C1H4R8CB01#
0.05pF GJM1552C1H4R9WB01#
0.1pF GJM1552C1H4R9BB01#
0.25pF GJM1552C1H4R9CB01#
0.05pF GJM1552C1H5R0WB01#
0.1pF GJM1552C1H5R0BB01#
0.25pF GJM1552C1H5R0CB01#
0.05pF GJM1552C1H5R1WB01#
0.1pF GJM1552C1H5R1BB01#
0.25pF GJM1552C1H5R1CB01#
0.5pF GJM1552C1H5R1DB01#
0.05pF GJM1552C1H5R2WB01#
0.1pF GJM1552C1H5R2BB01#
0.25pF GJM1552C1H5R2CB01#
0.5pF GJM1552C1H5R2DB01#
0.05pF GJM1552C1H5R3WB01#
0.1pF GJM1552C1H5R3BB01#
0.25pF GJM1552C1H5R3CB01#
0.5pF GJM1552C1H5R3DB01#
0.05pF GJM1552C1H5R4WB01#
0.1pF GJM1552C1H5R4BB01#
0.25pF GJM1552C1H5R4CB01#
0.5pF GJM1552C1H5R4DB01#
0.05pF GJM1552C1H5R5WB01#
2.2pF
2.3pF
2.4pF
2.5pF
2.6pF
2.7pF
2.8pF
2.9pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
3.5pF
3.6pF
3.7pF
3.8pF
CH
4.0pF
4.1pF
4.2pF
4.3pF
4.4pF
4.5pF
4.6pF
4.7pF
4.8pF
4.9pF
5.0pF
5.1pF
5.2pF
5.3pF
5.4pF
5.5pF
Part number # indicates the package specification code.
100
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢁE.pdf
Oct.ꢀ,ꢁ0ꢀꢁ
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc CH
5.5pF
0.ꢀpF GJM1552C1H5R5BB01#
0.ꢁ5pF GJM1552C1H5R5CB01#
0.5pF GJM1552C1H5R5DB01#
0.05pF GJM1552C1H5R6WB01#
0.ꢀpF GJM1552C1H5R6BB01#
0.ꢁ5pF GJM1552C1H5R6CB01#
0.5pF GJM1552C1H5R6DB01#
0.05pF GJM1552C1H5R7WB01#
0.ꢀpF GJM1552C1H5R7BB01#
0.ꢁ5pF GJM1552C1H5R7CB01#
0.5pF GJM1552C1H5R7DB01#
0.05pF GJM1552C1H5R8WB01#
0.ꢀpF GJM1552C1H5R8BB01#
0.ꢁ5pF GJM1552C1H5R8CB01#
0.5pF GJM1552C1H5R8DB01#
0.05pF GJM1552C1H5R9WB01#
0.ꢀpF GJM1552C1H5R9BB01#
0.ꢁ5pF GJM1552C1H5R9CB01#
0.5pF GJM1552C1H5R9DB01#
0.05pF GJM1552C1H6R0WB01#
0.ꢀpF GJM1552C1H6R0BB01#
0.ꢁ5pF GJM1552C1H6R0CB01#
0.5pF GJM1552C1H6R0DB01#
0.05pF GJM1552C1H6R1WB01#
0.ꢀpF GJM1552C1H6R1BB01#
0.ꢁ5pF GJM1552C1H6R1CB01#
0.5pF GJM1552C1H6R1DB01#
0.05pF GJM1552C1H6R2WB01#
0.ꢀpF GJM1552C1H6R2BB01#
0.ꢁ5pF GJM1552C1H6R2CB01#
0.5pF GJM1552C1H6R2DB01#
0.05pF GJM1552C1H6R3WB01#
0.ꢀpF GJM1552C1H6R3BB01#
0.ꢁ5pF GJM1552C1H6R3CB01#
0.5pF GJM1552C1H6R3DB01#
0.05pF GJM1552C1H6R4WB01#
0.ꢀpF GJM1552C1H6R4BB01#
0.ꢁ5pF GJM1552C1H6R4CB01#
0.5pF GJM1552C1H6R4DB01#
0.05pF GJM1552C1H6R5WB01#
0.ꢀpF GJM1552C1H6R5BB01#
0.ꢁ5pF GJM1552C1H6R5CB01#
0.5pF GJM1552C1H6R5DB01#
0.05pF GJM1552C1H6R6WB01#
0.ꢀpF GJM1552C1H6R6BB01#
0.ꢁ5pF GJM1552C1H6R6CB01#
0.5pF GJM1552C1H6R6DB01#
0.05pF GJM1552C1H6R7WB01#
0.ꢀpF GJM1552C1H6R7BB01#
0.ꢁ5pF GJM1552C1H6R7CB01#
0.5pF GJM1552C1H6R7DB01#
0.05pF GJM1552C1H6R8WB01#
0.ꢀpF GJM1552C1H6R8BB01#
0.ꢁ5pF GJM1552C1H6R8CB01#
0.55mm 50Vdc CH
6.8pF
6.9pF
0.5pF GJM1552C1H6R8DB01#
0.05pF GJM1552C1H6R9WB01#
0.ꢀpF GJM1552C1H6R9BB01#
0.ꢁ5pF GJM1552C1H6R9CB01#
0.5pF GJM1552C1H6R9DB01#
0.05pF GJM1552C1H7R0WB01#
0.ꢀpF GJM1552C1H7R0BB01#
0.ꢁ5pF GJM1552C1H7R0CB01#
0.5pF GJM1552C1H7R0DB01#
0.05pF GJM1552C1H7R1WB01#
0.ꢀpF GJM1552C1H7R1BB01#
0.ꢁ5pF GJM1552C1H7R1CB01#
0.5pF GJM1552C1H7R1DB01#
0.05pF GJM1552C1H7R2WB01#
0.ꢀpF GJM1552C1H7R2BB01#
0.ꢁ5pF GJM1552C1H7R2CB01#
0.5pF GJM1552C1H7R2DB01#
0.05pF GJM1552C1H7R3WB01#
0.ꢀpF GJM1552C1H7R3BB01#
0.ꢁ5pF GJM1552C1H7R3CB01#
0.5pF GJM1552C1H7R3DB01#
0.05pF GJM1552C1H7R4WB01#
0.ꢀpF GJM1552C1H7R4BB01#
0.ꢁ5pF GJM1552C1H7R4CB01#
0.5pF GJM1552C1H7R4DB01#
0.05pF GJM1552C1H7R5WB01#
0.ꢀpF GJM1552C1H7R5BB01#
0.ꢁ5pF GJM1552C1H7R5CB01#
0.5pF GJM1552C1H7R5DB01#
0.05pF GJM1552C1H7R6WB01#
0.ꢀpF GJM1552C1H7R6BB01#
0.ꢁ5pF GJM1552C1H7R6CB01#
0.5pF GJM1552C1H7R6DB01#
0.05pF GJM1552C1H7R7WB01#
0.ꢀpF GJM1552C1H7R7BB01#
0.ꢁ5pF GJM1552C1H7R7CB01#
0.5pF GJM1552C1H7R7DB01#
0.05pF GJM1552C1H7R8WB01#
0.ꢀpF GJM1552C1H7R8BB01#
0.ꢁ5pF GJM1552C1H7R8CB01#
0.5pF GJM1552C1H7R8DB01#
0.05pF GJM1552C1H7R9WB01#
0.ꢀpF GJM1552C1H7R9BB01#
0.ꢁ5pF GJM1552C1H7R9CB01#
0.5pF GJM1552C1H7R9DB01#
0.05pF GJM1552C1H8R0WB01#
0.ꢀpF GJM1552C1H8R0BB01#
0.ꢁ5pF GJM1552C1H8R0CB01#
0.5pF GJM1552C1H8R0DB01#
0.05pF GJM1552C1H8R1WB01#
0.ꢀpF GJM1552C1H8R1BB01#
0.ꢁ5pF GJM1552C1H8R1CB01#
0.5pF GJM1552C1H8R1DB01#
0.05pF GJM1552C1H8R2WB01#
5.6pF
5.7pF
5.8pF
5.9pF
6.0pF
6.ꢀpF
6.ꢁpF
6.3pF
6.4pF
6.5pF
6.6pF
6.7pF
6.8pF
7.0pF
7.ꢀpF
7.ꢁpF
7.3pF
7.4pF
7.5pF
7.6pF
7.7pF
7.8pF
7.9pF
8.0pF
8.ꢀpF
8.ꢁpF
Part number # indicates the package specification code.
ꢀ0ꢀ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.ꢀ,20ꢀ2
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc CH
8.2pF
0.ꢀpF GJM1552C1H8R2BB01#
0.25pF GJM1552C1H8R2CB01#
0.5pF GJM1552C1H8R2DB01#
0.05pF GJM1552C1H8R3WB01#
0.ꢀpF GJM1552C1H8R3BB01#
0.25pF GJM1552C1H8R3CB01#
0.5pF GJM1552C1H8R3DB01#
0.05pF GJM1552C1H8R4WB01#
0.ꢀpF GJM1552C1H8R4BB01#
0.25pF GJM1552C1H8R4CB01#
0.5pF GJM1552C1H8R4DB01#
0.05pF GJM1552C1H8R5WB01#
0.ꢀpF GJM1552C1H8R5BB01#
0.25pF GJM1552C1H8R5CB01#
0.5pF GJM1552C1H8R5DB01#
0.05pF GJM1552C1H8R6WB01#
0.ꢀpF GJM1552C1H8R6BB01#
0.25pF GJM1552C1H8R6CB01#
0.5pF GJM1552C1H8R6DB01#
0.05pF GJM1552C1H8R7WB01#
0.ꢀpF GJM1552C1H8R7BB01#
0.25pF GJM1552C1H8R7CB01#
0.5pF GJM1552C1H8R7DB01#
0.05pF GJM1552C1H8R8WB01#
0.ꢀpF GJM1552C1H8R8BB01#
0.25pF GJM1552C1H8R8CB01#
0.5pF GJM1552C1H8R8DB01#
0.05pF GJM1552C1H8R9WB01#
0.ꢀpF GJM1552C1H8R9BB01#
0.25pF GJM1552C1H8R9CB01#
0.5pF GJM1552C1H8R9DB01#
0.05pF GJM1552C1H9R0WB01#
0.ꢀpF GJM1552C1H9R0BB01#
0.25pF GJM1552C1H9R0CB01#
0.5pF GJM1552C1H9R0DB01#
0.05pF GJM1552C1H9R1WB01#
0.ꢀpF GJM1552C1H9R1BB01#
0.25pF GJM1552C1H9R1CB01#
0.5pF GJM1552C1H9R1DB01#
0.05pF GJM1552C1H9R2WB01#
0.ꢀpF GJM1552C1H9R2BB01#
0.25pF GJM1552C1H9R2CB01#
0.5pF GJM1552C1H9R2DB01#
0.05pF GJM1552C1H9R3WB01#
0.ꢀpF GJM1552C1H9R3BB01#
0.25pF GJM1552C1H9R3CB01#
0.5pF GJM1552C1H9R3DB01#
0.05pF GJM1552C1H9R4WB01#
0.ꢀpF GJM1552C1H9R4BB01#
0.25pF GJM1552C1H9R4CB01#
0.5pF GJM1552C1H9R4DB01#
0.05pF GJM1552C1H9R5WB01#
0.ꢀpF GJM1552C1H9R5BB01#
0.25pF GJM1552C1H9R5CB01#
0.55mm 50Vdc CH
9.5pF
9.6pF
0.5pF GJM1552C1H9R5DB01#
0.05pF GJM1552C1H9R6WB01#
0.ꢀpF GJM1552C1H9R6BB01#
0.25pF GJM1552C1H9R6CB01#
0.5pF GJM1552C1H9R6DB01#
0.05pF GJM1552C1H9R7WB01#
0.ꢀpF GJM1552C1H9R7BB01#
0.25pF GJM1552C1H9R7CB01#
0.5pF GJM1552C1H9R7DB01#
0.05pF GJM1552C1H9R8WB01#
0.ꢀpF GJM1552C1H9R8BB01#
0.25pF GJM1552C1H9R8CB01#
0.5pF GJM1552C1H9R8DB01#
0.05pF GJM1552C1H9R9WB01#
0.ꢀpF GJM1552C1H9R9BB01#
0.25pF GJM1552C1H9R9CB01#
0.5pF GJM1552C1H9R9DB01#
8.3pF
8.4pF
8.5pF
8.6pF
8.7pF
8.8pF
8.9pF
9.0pF
9.ꢀpF
9.2pF
9.3pF
9.4pF
9.5pF
9.7pF
9.8pF
9.9pF
ꢀ0pF
ꢀꢀpF
ꢀ2pF
ꢀ3pF
ꢀ5pF
ꢀ6pF
ꢀ8pF
20pF
22pF
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
2ꢁ
5ꢁ
ꢀꢁ
2ꢁ
5ꢁ
ꢀꢁ
2ꢁ
5ꢁ
ꢀꢁ
2ꢁ
5ꢁ
ꢀꢁ
2ꢁ
5ꢁ
ꢀꢁ
2ꢁ
5ꢁ
ꢀꢁ
2ꢁ
5ꢁ
ꢀꢁ
2ꢁ
5ꢁ
GJM1552C1H100GB01#
GJM1552C1H100JB01#
GJM1552C1H110GB01#
GJM1552C1H110JB01#
GJM1552C1H120GB01#
GJM1552C1H120JB01#
GJM1552C1H130GB01#
GJM1552C1H130JB01#
GJM1552C1H150GB01#
GJM1552C1H150JB01#
GJM1552C1H160GB01#
GJM1552C1H160JB01#
GJM1552C1H180GB01#
GJM1552C1H180JB01#
GJM1552C1H200GB01#
GJM1552C1H200JB01#
GJM1552C1H220FB01#
GJM1552C1H220GB01#
GJM1552C1H220JB01#
GJM1552C1H240FB01#
GJM1552C1H240GB01#
GJM1552C1H240JB01#
GJM1552C1H270FB01#
GJM1552C1H270GB01#
GJM1552C1H270JB01#
GJM1552C1H300FB01#
GJM1552C1H300GB01#
GJM1552C1H300JB01#
GJM1552C1H330FB01#
GJM1552C1H330GB01#
GJM1552C1H330JB01#
GJM1552C1H360FB01#
GJM1552C1H360GB01#
GJM1552C1H360JB01#
GJM1552C1H390FB01#
GJM1552C1H390GB01#
GJM1552C1H390JB01#
24pF
27pF
30pF
33pF
36pF
39pF
Part number # indicates the package specification code.
ꢀ02
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.±,ꢀ0±ꢀ
HiQ
GJM Series Temperature Compensating Type
Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm 50Vdc CH
43pF
±±1
±ꢀ1
±51
±±1
±ꢀ1
±51
GJM1552C1H430FB01#
GJM1552C1H430GB01#
GJM1552C1H430JB01#
GJM1552C1H470FB01#
GJM1552C1H470GB01#
GJM1552C1H470JB01#
47pF
Part number # indicates the package specification code.
±03
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
HiQ
High Frequency GQM Series
Capacitor for high frequency suitable for PA designs.
e
g
e
T
W
L
1
2
3
4
5
HiQ and low ESR in UHF and microwave frequency bands.
Highly conductive copper was adopted for the internal electrodes.
Product compatible to tight tolerances.
Achieved high withstand voltages.
Ideal for improving the characteristics and reducing power consumption in RF equipment.
104
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GQM Series Temperature Compensating Type
Part Number List
T
Rated
TC
Cap.
Tol.
Part Number
1.6×0.8mm
c
max. Voltage Code
0.8mm 250Vdc C0G 6.0pF
0.25pF GQM1875C2E6R0CB12#
0.5pF GQM1875C2E6R0DB12#
0.25pF GQM1875C2E6R2CB12#
0.5pF GQM1875C2E6R2DB12#
0.25pF GQM1875C2E6R8CB12#
0.5pF GQM1875C2E6R8DB12#
0.25pF GQM1875C2E7R0CB12#
0.5pF GQM1875C2E7R0DB12#
0.25pF GQM1875C2E7R5CB12#
0.5pF GQM1875C2E7R5DB12#
0.25pF GQM1875C2E8R0CB12#
0.5pF GQM1875C2E8R0DB12#
0.25pF GQM1875C2E8R2CB12#
0.5pF GQM1875C2E8R2DB12#
0.25pF GQM1875C2E9R0CB12#
0.5pF GQM1875C2E9R0DB12#
0.25pF GQM1875C2E9R1CB12#
0.5pF GQM1875C2E9R1DB12#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.8mm 250Vdc C0G 0.1pF
0.1pF GQM1875C2ER10BB12#
0.1pF GQM1875C2ER20BB12#
0.1pF GQM1875C2ER30BB12#
0.25pF GQM1875C2ER30CB12#
0.1pF GQM1875C2ER40BB12#
0.25pF GQM1875C2ER40CB12#
0.1pF GQM1875C2ER50BB12#
0.25pF GQM1875C2ER50CB12#
0.1pF GQM1875C2ER75BB12#
0.25pF GQM1875C2ER75CB12#
0.1pF GQM1875C2E1R0BB12#
0.25pF GQM1875C2E1R0CB12#
0.1pF GQM1875C2E1R1BB12#
0.25pF GQM1875C2E1R1CB12#
0.1pF GQM1875C2E1R2BB12#
0.25pF GQM1875C2E1R2CB12#
0.1pF GQM1875C2E1R3BB12#
0.25pF GQM1875C2E1R3CB12#
0.1pF GQM1875C2E1R5BB12#
0.25pF GQM1875C2E1R5CB12#
0.1pF GQM1875C2E1R6BB12#
0.25pF GQM1875C2E1R6CB12#
0.1pF GQM1875C2E1R8BB12#
0.25pF GQM1875C2E1R8CB12#
0.1pF GQM1875C2E2R0BB12#
0.25pF GQM1875C2E2R0CB12#
0.1pF GQM1875C2E2R2BB12#
0.25pF GQM1875C2E2R2CB12#
0.1pF GQM1875C2E2R4BB12#
0.25pF GQM1875C2E2R4CB12#
0.1pF GQM1875C2E2R7BB12#
0.25pF GQM1875C2E2R7CB12#
0.1pF GQM1875C2E3R0BB12#
0.25pF GQM1875C2E3R0CB12#
0.1pF GQM1875C2E3R3BB12#
0.25pF GQM1875C2E3R3CB12#
0.1pF GQM1875C2E3R6BB12#
0.25pF GQM1875C2E3R6CB12#
0.1pF GQM1875C2E3R9BB12#
0.25pF GQM1875C2E3R9CB12#
0.1pF GQM1875C2E4R0BB12#
0.25pF GQM1875C2E4R0CB12#
0.1pF GQM1875C2E4R3BB12#
0.25pF GQM1875C2E4R3CB12#
0.1pF GQM1875C2E4R7BB12#
0.25pF GQM1875C2E4R7CB12#
0.1pF GQM1875C2E5R0BB12#
0.25pF GQM1875C2E5R0CB12#
0.25pF GQM1875C2E5R1CB12#
0.5pF GQM1875C2E5R1DB12#
0.25pF GQM1875C2E5R6CB12#
0.5pF GQM1875C2E5R6DB12#
6.2pF
0.2pF
0.3pF
6.8pF
0.4pF
0.5pF
0.75pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
1.6pF
1.8pF
2.0pF
2.2pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.1pF
5.6pF
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
GQM1875C2E100GB12#
GQM1875C2E100JB12#
GQM1875C2E110GB12#
GQM1875C2E110JB12#
GQM1875C2E120GB12#
GQM1875C2E120JB12#
GQM1875C2E130GB12#
GQM1875C2E130JB12#
GQM1875C2E150GB12#
GQM1875C2E150JB12#
GQM1875C2E160GB12#
GQM1875C2E160JB12#
GQM1875C2E180GB12#
GQM1875C2E180JB12#
GQM1875C2E200GB12#
GQM1875C2E200JB12#
GQM1875C2E220GB12#
GQM1875C2E220JB12#
GQM1875C2E240GB12#
GQM1875C2E240JB12#
GQM1875C2E270GB12#
GQM1875C2E270JB12#
GQM1875C2E300GB12#
GQM1875C2E300JB12#
GQM1875C2E330GB12#
GQM1875C2E330JB12#
GQM1875C2E360GB12#
GQM1875C2E360JB12#
GQM1875C2E390GB12#
GQM1875C2E390JB12#
GQM1875C2E430GB12#
GQM1875C2E430JB12#
GQM1875C2E470GB12#
GQM1875C2E470JB12#
11pF
12pF
13pF
15pF
16pF
18pF
20pF
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
47pF
0.9mm 100Vdc C0G 0.5pF
0.1pF GQM1885C2AR50BB01#
0.25pF GQM1885C2AR50CB01#
Part number # indicates the package specification code.
105
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
HiQ
GQM Series Temperature Compensating Type
Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 100Vdc C0G 0.75pF
0.1pF GQM1885C2AR75BB01#
0.ꢀ5pF GQM1885C2AR75CB01#
0.1pF GQM1885C2A1R0BB01#
0.ꢀ5pF GQM1885C2A1R0CB01#
0.1pF GQM1885C2A1R1BB01#
0.ꢀ5pF GQM1885C2A1R1CB01#
0.1pF GQM1885C2A1R2BB01#
0.ꢀ5pF GQM1885C2A1R2CB01#
0.1pF GQM1885C2A1R3BB01#
0.ꢀ5pF GQM1885C2A1R3CB01#
0.1pF GQM1885C2A1R5BB01#
0.ꢀ5pF GQM1885C2A1R5CB01#
0.1pF GQM1885C2A1R6BB01#
0.ꢀ5pF GQM1885C2A1R6CB01#
0.1pF GQM1885C2A1R8BB01#
0.ꢀ5pF GQM1885C2A1R8CB01#
0.1pF GQM1885C2A2R0BB01#
0.ꢀ5pF GQM1885C2A2R0CB01#
0.1pF GQM1885C2A2R2BB01#
0.ꢀ5pF GQM1885C2A2R2CB01#
0.1pF GQM1885C2A2R4BB01#
0.ꢀ5pF GQM1885C2A2R4CB01#
0.1pF GQM1885C2A2R7BB01#
0.ꢀ5pF GQM1885C2A2R7CB01#
0.1pF GQM1885C2A3R0BB01#
0.ꢀ5pF GQM1885C2A3R0CB01#
0.1pF GQM1885C2A3R3BB01#
0.ꢀ5pF GQM1885C2A3R3CB01#
0.1pF GQM1885C2A3R6BB01#
0.ꢀ5pF GQM1885C2A3R6CB01#
0.1pF GQM1885C2A3R9BB01#
0.ꢀ5pF GQM1885C2A3R9CB01#
0.1pF GQM1885C2A4R0BB01#
0.ꢀ5pF GQM1885C2A4R0CB01#
0.1pF GQM1885C2A4R3BB01#
0.ꢀ5pF GQM1885C2A4R3CB01#
0.1pF GQM1885C2A4R7BB01#
0.ꢀ5pF GQM1885C2A4R7CB01#
0.1pF GQM1885C2A5R0BB01#
0.ꢀ5pF GQM1885C2A5R0CB01#
0.ꢀ5pF GQM1885C2A5R1CB01#
0.5pF GQM1885C2A5R1DB01#
0.ꢀ5pF GQM1885C2A5R6CB01#
0.5pF GQM1885C2A5R6DB01#
0.ꢀ5pF GQM1885C2A6R0CB01#
0.5pF GQM1885C2A6R0DB01#
0.ꢀ5pF GQM1885C2A6R2CB01#
0.5pF GQM1885C2A6R2DB01#
0.ꢀ5pF GQM1885C2A6R8CB01#
0.5pF GQM1885C2A6R8DB01#
0.1pF GQM1884C2AR50BB01#
0.ꢀ5pF GQM1884C2AR50CB01#
0.1pF GQM1884C2AR75BB01#
0.ꢀ5pF GQM1884C2AR75CB01#
0.9mm 100Vdc CK
1.0pF
0.1pF GQM1884C2A1R0BB01#
0.ꢀ5pF GQM1884C2A1R0CB01#
0.1pF GQM1884C2A1R1BB01#
0.ꢀ5pF GQM1884C2A1R1CB01#
0.1pF GQM1884C2A1R2BB01#
0.ꢀ5pF GQM1884C2A1R2CB01#
0.1pF GQM1884C2A1R3BB01#
0.ꢀ5pF GQM1884C2A1R3CB01#
0.1pF GQM1884C2A1R5BB01#
0.ꢀ5pF GQM1884C2A1R5CB01#
0.1pF GQM1884C2A1R6BB01#
0.ꢀ5pF GQM1884C2A1R6CB01#
0.1pF GQM1884C2A1R8BB01#
0.ꢀ5pF GQM1884C2A1R8CB01#
0.1pF GQM1884C2A2R0BB01#
0.ꢀ5pF GQM1884C2A2R0CB01#
0.1pF GQM1883C2A2R2BB01#
0.ꢀ5pF GQM1883C2A2R2CB01#
0.1pF GQM1883C2A2R4BB01#
0.ꢀ5pF GQM1883C2A2R4CB01#
0.1pF GQM1883C2A2R7BB01#
0.ꢀ5pF GQM1883C2A2R7CB01#
0.1pF GQM1883C2A3R0BB01#
0.ꢀ5pF GQM1883C2A3R0CB01#
0.1pF GQM1883C2A3R3BB01#
0.ꢀ5pF GQM1883C2A3R3CB01#
0.1pF GQM1883C2A3R6BB01#
0.ꢀ5pF GQM1883C2A3R6CB01#
0.1pF GQM1883C2A3R9BB01#
0.ꢀ5pF GQM1883C2A3R9CB01#
0.1pF GQM1882C2A4R0BB01#
0.ꢀ5pF GQM1882C2A4R0CB01#
0.1pF GQM1882C2A4R3BB01#
0.ꢀ5pF GQM1882C2A4R3CB01#
0.1pF GQM1882C2A4R7BB01#
0.ꢀ5pF GQM1882C2A4R7CB01#
0.1pF GQM1882C2A5R0BB01#
0.ꢀ5pF GQM1882C2A5R0CB01#
0.ꢀ5pF GQM1882C2A5R1CB01#
0.5pF GQM1882C2A5R1DB01#
0.ꢀ5pF GQM1882C2A5R6CB01#
0.5pF GQM1882C2A5R6DB01#
0.ꢀ5pF GQM1882C2A6R0CB01#
0.5pF GQM1882C2A6R0DB01#
0.ꢀ5pF GQM1882C2A6R2CB01#
0.5pF GQM1882C2A6R2DB01#
0.ꢀ5pF GQM1882C2A6R8CB01#
0.5pF GQM1882C2A6R8DB01#
0.ꢀ5pF GQM1885C1H7R0CB01#
0.5pF GQM1885C1H7R0DB01#
0.ꢀ5pF GQM1885C1H7R5CB01#
0.5pF GQM1885C1H7R5DB01#
0.ꢀ5pF GQM1885C1H8R0CB01#
0.5pF GQM1885C1H8R0DB01#
1.0pF
1.1pF
1.ꢀpF
1.3pF
1.5pF
1.6pF
1.8pF
ꢀ.0pF
ꢀ.ꢀpF
ꢀ.4pF
ꢀ.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.1pF
5.6pF
6.0pF
6.ꢀpF
6.8pF
1.1pF
1.ꢀpF
1.3pF
1.5pF
1.6pF
1.8pF
ꢀ.0pF
ꢀ.ꢀpF
ꢀ.4pF
ꢀ.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.1pF
5.6pF
6.0pF
6.ꢀpF
6.8pF
CJ
CH
50Vdc C0G 7.0pF
CK
0.5pF
7.5pF
8.0pF
0.75pF
Part number # indicates the package specification code.
106
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GQM Series Temperature Compensating Type
Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc C0G 8.2pF
0.25pF GQM1885C1H8R2CB01#
0.5pF GQM1885C1H8R2DB01#
0.25pF GQM1885C1H9R0CB01#
0.5pF GQM1885C1H9R0DB01#
0.25pF GQM1885C1H9R1CB01#
0.5pF GQM1885C1H9R1DB01#
0.9mm 50Vdc C0G 100pF
2ꢀ
5ꢀ
GQM1885C1H101GB01#
GQM1885C1H101JB01#
9.0pF
9.1pF
10pF
11pF
12pF
13pF
15pF
16pF
18pF
20pF
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
47pF
51pF
56pF
62pF
68pF
75pF
82pF
91pF
CH
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
11pF
12pF
13pF
15pF
16pF
18pF
20pF
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
47pF
51pF
56pF
62pF
0.25pF GQM1882C1H7R0CB01#
0.5pF GQM1882C1H7R0DB01#
0.25pF GQM1882C1H7R5CB01#
0.5pF GQM1882C1H7R5DB01#
0.25pF GQM1882C1H8R0CB01#
0.5pF GQM1882C1H8R0DB01#
0.25pF GQM1882C1H8R2CB01#
0.5pF GQM1882C1H8R2DB01#
0.25pF GQM1882C1H9R0CB01#
0.5pF GQM1882C1H9R0DB01#
0.25pF GQM1882C1H9R1CB01#
0.5pF GQM1882C1H9R1DB01#
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
GQM1885C1H100GB01#
GQM1885C1H100JB01#
GQM1885C1H110GB01#
GQM1885C1H110JB01#
GQM1885C1H120GB01#
GQM1885C1H120JB01#
GQM1885C1H130GB01#
GQM1885C1H130JB01#
GQM1885C1H150GB01#
GQM1885C1H150JB01#
GQM1885C1H160GB01#
GQM1885C1H160JB01#
GQM1885C1H180GB01#
GQM1885C1H180JB01#
GQM1885C1H200GB01#
GQM1885C1H200JB01#
GQM1885C1H220GB01#
GQM1885C1H220JB01#
GQM1885C1H240GB01#
GQM1885C1H240JB01#
GQM1885C1H270GB01#
GQM1885C1H270JB01#
GQM1885C1H300GB01#
GQM1885C1H300JB01#
GQM1885C1H330GB01#
GQM1885C1H330JB01#
GQM1885C1H360GB01#
GQM1885C1H360JB01#
GQM1885C1H390GB01#
GQM1885C1H390JB01#
GQM1885C1H430GB01#
GQM1885C1H430JB01#
GQM1885C1H470GB01#
GQM1885C1H470JB01#
GQM1885C1H510GB01#
GQM1885C1H510JB01#
GQM1885C1H560GB01#
GQM1885C1H560JB01#
GQM1885C1H620GB01#
GQM1885C1H620JB01#
GQM1885C1H680GB01#
GQM1885C1H680JB01#
GQM1885C1H750GB01#
GQM1885C1H750JB01#
GQM1885C1H820GB01#
GQM1885C1H820JB01#
GQM1885C1H910GB01#
GQM1885C1H910JB01#
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
GQM1882C1H100GB01#
GQM1882C1H100JB01#
GQM1882C1H110GB01#
GQM1882C1H110JB01#
GQM1882C1H120GB01#
GQM1882C1H120JB01#
GQM1882C1H130GB01#
GQM1882C1H130JB01#
GQM1882C1H150GB01#
GQM1882C1H150JB01#
GQM1882C1H160GB01#
GQM1882C1H160JB01#
GQM1882C1H180GB01#
GQM1882C1H180JB01#
GQM1882C1H200GB01#
GQM1882C1H200JB01#
GQM1882C1H220GB01#
GQM1882C1H220JB01#
GQM1882C1H240GB01#
GQM1882C1H240JB01#
GQM1882C1H270GB01#
GQM1882C1H270JB01#
GQM1882C1H300GB01#
GQM1882C1H300JB01#
GQM1882C1H330GB01#
GQM1882C1H330JB01#
GQM1882C1H360GB01#
GQM1882C1H360JB01#
GQM1882C1H390GB01#
GQM1882C1H390JB01#
GQM1882C1H430GB01#
GQM1882C1H430JB01#
GQM1882C1H470GB01#
GQM1882C1H470JB01#
GQM1882C1H510GB01#
GQM1882C1H510JB01#
GQM1882C1H560GB01#
GQM1882C1H560JB01#
GQM1882C1H620GB01#
GQM1882C1H620JB01#
Part number # indicates the package specification code.
107
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
HiQ
GQM Series Temperature Compensating Type
Part Number List
→
(
1.6×0.8mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.9mm 50Vdc CH
68pF
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
GQM1882C1H680GB01#
GQM1882C1H680JB01#
GQM1882C1H750GB01#
GQM1882C1H750JB01#
GQM1882C1H820GB01#
GQM1882C1H820JB01#
GQM1882C1H910GB01#
GQM1882C1H910JB01#
GQM1882C1H101GB01#
GQM1882C1H101JB01#
0.95mm 100Vdc C0G 4.7pF ±0.±5pF GQM2195C2A4R7CB01#
5.0pF
±0.1pF GQM2195C2A5R0BB01#
±0.±5pF GQM2195C2A5R0CB01#
75pF
8±pF
91pF
100pF
5.1pF ±0.±5pF GQM2195C2A5R1CB01#
±0.5pF GQM2195C2A5R1DB01#
5.6pF ±0.±5pF GQM2195C2A5R6CB01#
±0.5pF GQM2195C2A5R6DB01#
6.0pF ±0.±5pF GQM2195C2A6R0CB01#
±0.5pF GQM2195C2A6R0DB01#
6.±pF ±0.±5pF GQM2195C2A6R2CB01#
±0.5pF GQM2195C2A6R2DB01#
6.8pF ±0.±5pF GQM2195C2A6R8CB01#
±0.5pF GQM2195C2A6R8DB01#
2.0×1.25mm
c
7.0pF ±0.±5pF GQM2195C2A7R0CB01#
±0.5pF GQM2195C2A7R0DB01#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.95mm 100Vdc C0G 0.5pF
±0.1pF GQM2195C2AR50BB01#
±0.±5pF GQM2195C2AR50CB01#
7.5pF ±0.±5pF GQM2195C2A7R5CB01#
±0.5pF GQM2195C2A7R5DB01#
0.75pF ±0.1pF GQM2195C2AR75BB01#
±0.±5pF GQM2195C2AR75CB01#
8.0pF ±0.±5pF GQM2195C2A8R0CB01#
±0.5pF GQM2195C2A8R0DB01#
1.0pF
1.1pF
1.±pF
1.3pF
1.5pF
1.6pF
1.8pF
±.0pF
±.±pF
±.4pF
±.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
±0.1pF GQM2195C2A1R0BB01#
±0.±5pF GQM2195C2A1R0CB01#
±0.1pF GQM2195C2A1R1BB01#
±0.±5pF GQM2195C2A1R1CB01#
±0.1pF GQM2195C2A1R2BB01#
±0.±5pF GQM2195C2A1R2CB01#
±0.1pF GQM2195C2A1R3BB01#
±0.±5pF GQM2195C2A1R3CB01#
±0.1pF GQM2195C2A1R5BB01#
±0.±5pF GQM2195C2A1R5CB01#
±0.1pF GQM2195C2A1R6BB01#
±0.±5pF GQM2195C2A1R6CB01#
±0.1pF GQM2195C2A1R8BB01#
±0.±5pF GQM2195C2A1R8CB01#
±0.1pF GQM2195C2A2R0BB01#
±0.±5pF GQM2195C2A2R0CB01#
±0.1pF GQM2195C2A2R2BB01#
±0.±5pF GQM2195C2A2R2CB01#
±0.1pF GQM2195C2A2R4BB01#
±0.±5pF GQM2195C2A2R4CB01#
±0.1pF GQM2195C2A2R7BB01#
±0.±5pF GQM2195C2A2R7CB01#
±0.1pF GQM2195C2A3R0BB01#
±0.±5pF GQM2195C2A3R0CB01#
±0.1pF GQM2195C2A3R3BB01#
±0.±5pF GQM2195C2A3R3CB01#
±0.1pF GQM2195C2A3R6BB01#
±0.±5pF GQM2195C2A3R6CB01#
±0.1pF GQM2195C2A3R9BB01#
±0.±5pF GQM2195C2A3R9CB01#
±0.1pF GQM2195C2A4R0BB01#
±0.±5pF GQM2195C2A4R0CB01#
±0.1pF GQM2195C2A4R3BB01#
±0.±5pF GQM2195C2A4R3CB01#
±0.1pF GQM2195C2A4R7BB01#
8.±pF ±0.±5pF GQM2195C2A8R2CB01#
±0.5pF GQM2195C2A8R2DB01#
9.0pF ±0.±5pF GQM2195C2A9R0CB01#
±0.5pF GQM2195C2A9R0DB01#
9.1pF ±0.±5pF GQM2195C2A9R1CB01#
±0.5pF GQM2195C2A9R1DB01#
10pF
11pF
1±pF
13pF
15pF
16pF
18pF
0.5pF
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
GQM2195C2A100GB01#
GQM2195C2A100JB01#
GQM2195C2A110GB01#
GQM2195C2A110JB01#
GQM2195C2A120GB01#
GQM2195C2A120JB01#
GQM2195C2A130GB01#
GQM2195C2A130JB01#
GQM2195C2A150GB01#
GQM2195C2A150JB01#
GQM2195C2A160GB01#
GQM2195C2A160JB01#
GQM2195C2A180GB01#
GQM2195C2A180JB01#
CK
±0.1pF GQM2194C2AR50BB01#
±0.±5pF GQM2194C2AR50CB01#
0.75pF ±0.1pF GQM2194C2AR75BB01#
±0.±5pF GQM2194C2AR75CB01#
1.0pF
1.1pF
1.±pF
1.3pF
1.5pF
1.6pF
±0.1pF GQM2194C2A1R0BB01#
±0.±5pF GQM2194C2A1R0CB01#
±0.1pF GQM2194C2A1R1BB01#
±0.±5pF GQM2194C2A1R1CB01#
±0.1pF GQM2194C2A1R2BB01#
±0.±5pF GQM2194C2A1R2CB01#
±0.1pF GQM2194C2A1R3BB01#
±0.±5pF GQM2194C2A1R3CB01#
±0.1pF GQM2194C2A1R5BB01#
±0.±5pF GQM2194C2A1R5CB01#
±0.1pF GQM2194C2A1R6BB01#
Part number # indicates the package specification code.
108
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0ꢀE.pdf
Oct.1,ꢀ01ꢀ
HiQ
GQM Series Temperature Compensating Type
Part Number List
→
(
2.0×1.25mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.95mm 100Vdc CK
1.6pF
1.8pF
0.ꢀ5pF GQM2194C2A1R6CB01#
0.1pF GQM2194C2A1R8BB01#
0.ꢀ5pF GQM2194C2A1R8CB01#
0.1pF GQM2194C2A2R0BB01#
0.ꢀ5pF GQM2194C2A2R0CB01#
0.1pF GQM2193C2A2R2BB01#
0.ꢀ5pF GQM2193C2A2R2CB01#
0.1pF GQM2193C2A2R4BB01#
0.ꢀ5pF GQM2193C2A2R4CB01#
0.1pF GQM2193C2A2R7BB01#
0.ꢀ5pF GQM2193C2A2R7CB01#
0.1pF GQM2193C2A3R0BB01#
0.ꢀ5pF GQM2193C2A3R0CB01#
0.1pF GQM2193C2A3R3BB01#
0.ꢀ5pF GQM2193C2A3R3CB01#
0.1pF GQM2193C2A3R6BB01#
0.ꢀ5pF GQM2193C2A3R6CB01#
0.1pF GQM2193C2A3R9BB01#
0.ꢀ5pF GQM2193C2A3R9CB01#
0.1pF GQM2192C2A4R0BB01#
0.ꢀ5pF GQM2192C2A4R0CB01#
0.1pF GQM2192C2A4R3BB01#
0.ꢀ5pF GQM2192C2A4R3CB01#
0.1pF GQM2192C2A4R7BB01#
0.ꢀ5pF GQM2192C2A4R7CB01#
0.1pF GQM2192C2A5R0BB01#
0.ꢀ5pF GQM2192C2A5R0CB01#
0.ꢀ5pF GQM2192C2A5R1CB01#
0.5pF GQM2192C2A5R1DB01#
0.ꢀ5pF GQM2192C2A5R6CB01#
0.5pF GQM2192C2A5R6DB01#
0.ꢀ5pF GQM2192C2A6R0CB01#
0.5pF GQM2192C2A6R0DB01#
0.ꢀ5pF GQM2192C2A6R2CB01#
0.5pF GQM2192C2A6R2DB01#
0.ꢀ5pF GQM2192C2A6R8CB01#
0.5pF GQM2192C2A6R8DB01#
0.ꢀ5pF GQM2192C2A7R0CB01#
0.5pF GQM2192C2A7R0DB01#
0.ꢀ5pF GQM2192C2A7R5CB01#
0.5pF GQM2192C2A7R5DB01#
0.ꢀ5pF GQM2192C2A8R0CB01#
0.5pF GQM2192C2A8R0DB01#
0.ꢀ5pF GQM2192C2A8R2CB01#
0.5pF GQM2192C2A8R2DB01#
0.ꢀ5pF GQM2192C2A9R0CB01#
0.5pF GQM2192C2A9R0DB01#
0.ꢀ5pF GQM2192C2A9R1CB01#
0.5pF GQM2192C2A9R1DB01#
0.95mm 100Vdc CH
1ꢀpF
13pF
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
52
ꢀ2
GQM2192C2A120JB01#
GQM2192C2A130GB01#
GQM2192C2A130JB01#
GQM2192C2A150GB01#
GQM2192C2A150JB01#
GQM2192C2A160GB01#
GQM2192C2A160JB01#
GQM2192C2A180GB01#
GQM2192C2A180JB01#
GQM2195C1H200GB01#
GQM2195C1H200JB01#
GQM2195C1H220GB01#
GQM2195C1H220JB01#
GQM2195C1H240GB01#
GQM2195C1H240JB01#
GQM2195C1H270GB01#
GQM2195C1H270JB01#
GQM2195C1H300GB01#
GQM2195C1H300JB01#
GQM2195C1H330GB01#
GQM2195C1H330JB01#
GQM2195C1H360GB01#
GQM2195C1H360JB01#
GQM2195C1H390GB01#
GQM2195C1H390JB01#
GQM2195C1H430GB01#
GQM2195C1H430JB01#
GQM2195C1H470GB01#
GQM2195C1H470JB01#
GQM2195C1H510GB01#
GQM2195C1H510JB01#
GQM2195C1H560GB01#
GQM2195C1H560JB01#
GQM2195C1H620GB01#
GQM2195C1H620JB01#
GQM2195C1H680GB01#
GQM2195C1H680JB01#
GQM2195C1H750GB01#
GQM2195C1H750JB01#
GQM2195C1H820GB01#
GQM2195C1H820JB01#
GQM2195C1H910GB01#
GQM2195C1H910JB01#
GQM2195C1H101GB01#
GQM2195C1H101JB01#
GQM2192C1H200GB01#
GQM2192C1H200JB01#
GQM2192C1H220GB01#
GQM2192C1H220JB01#
GQM2192C1H240GB01#
GQM2192C1H240JB01#
GQM2192C1H270GB01#
GQM2192C1H270JB01#
GQM2192C1H300GB01#
ꢀ.0pF
ꢀ.ꢀpF
ꢀ.4pF
ꢀ.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.1pF
5.6pF
6.0pF
6.ꢀpF
6.8pF
7.0pF
7.5pF
8.0pF
8.ꢀpF
9.0pF
9.1pF
10pF
15pF
16pF
18pF
ꢀ0pF
ꢀꢀpF
ꢀ4pF
ꢀ7pF
30pF
33pF
36pF
39pF
43pF
47pF
51pF
56pF
6ꢀpF
68pF
75pF
8ꢀpF
91pF
100pF
ꢀ0pF
ꢀꢀpF
ꢀ4pF
ꢀ7pF
30pF
CJ
50Vdc C0G
CH
CH
ꢀ2
52
ꢀ2
52
ꢀ2
GQM2192C2A100GB01#
GQM2192C2A100JB01#
GQM2192C2A110GB01#
GQM2192C2A110JB01#
GQM2192C2A120GB01#
11pF
1ꢀpF
Part number # indicates the package specification code.
109
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
HiQ
GQM Series Temperature Compensating Type
Part Number List
→
(
2.0×1.25mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.95mm 50Vdc CH
30pF
33pF
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
GQM2192C1H300JB01#
GQM2192C1H330GB01#
GQM2192C1H330JB01#
GQM2192C1H360GB01#
GQM2192C1H360JB01#
GQM2192C1H390GB01#
GQM2192C1H390JB01#
GQM2192C1H430GB01#
GQM2192C1H430JB01#
GQM2192C1H470GB01#
GQM2192C1H470JB01#
GQM2192C1H510GB01#
GQM2192C1H510JB01#
GQM2192C1H560GB01#
GQM2192C1H560JB01#
GQM2192C1H620GB01#
GQM2192C1H620JB01#
GQM2192C1H680GB01#
GQM2192C1H680JB01#
GQM2192C1H750GB01#
GQM2192C1H750JB01#
GQM2192C1H820GB01#
GQM2192C1H820JB01#
GQM2192C1H910GB01#
GQM2192C1H910JB01#
GQM2192C1H101GB01#
GQM2192C1H101JB01#
1mm ±50Vdc C0G 3.0pF ±0.±5pF GQM2195C2E3R0CB12#
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
±0.1pF GQM2195C2E3R3BB12#
±0.±5pF GQM2195C2E3R3CB12#
±0.1pF GQM2195C2E3R6BB12#
±0.±5pF GQM2195C2E3R6CB12#
±0.1pF GQM2195C2E3R9BB12#
±0.±5pF GQM2195C2E3R9CB12#
±0.1pF GQM2195C2E4R0BB12#
±0.±5pF GQM2195C2E4R0CB12#
±0.1pF GQM2195C2E4R3BB12#
±0.±5pF GQM2195C2E4R3CB12#
±0.1pF GQM2195C2E4R7BB12#
±0.±5pF GQM2195C2E4R7CB12#
±0.1pF GQM2195C2E5R0BB12#
±0.±5pF GQM2195C2E5R0CB12#
36pF
39pF
43pF
47pF
51pF
56pF
6±pF
68pF
75pF
8±pF
91pF
100pF
5.1pF ±0.±5pF GQM2195C2E5R1CB12#
±0.5pF GQM2195C2E5R1DB12#
5.6pF ±0.±5pF GQM2195C2E5R6CB12#
±0.5pF GQM2195C2E5R6DB12#
6.0pF ±0.±5pF GQM2195C2E6R0CB12#
±0.5pF GQM2195C2E6R0DB12#
6.±pF ±0.±5pF GQM2195C2E6R2CB12#
±0.5pF GQM2195C2E6R2DB12#
6.8pF ±0.±5pF GQM2195C2E6R8CB12#
±0.5pF GQM2195C2E6R8DB12#
7.0pF ±0.±5pF GQM2195C2E7R0CB12#
±0.5pF GQM2195C2E7R0DB12#
1mm ±50Vdc C0G 0.5pF
±0.1pF GQM2195C2ER50BB12#
±0.±5pF GQM2195C2ER50CB12#
7.5pF ±0.±5pF GQM2195C2E7R5CB12#
±0.5pF GQM2195C2E7R5DB12#
0.75pF ±0.1pF GQM2195C2ER75BB12#
±0.±5pF GQM2195C2ER75CB12#
8.0pF ±0.±5pF GQM2195C2E8R0CB12#
±0.5pF GQM2195C2E8R0DB12#
1.0pF
1.1pF
1.±pF
1.3pF
1.5pF
1.6pF
1.8pF
±.0pF
±.±pF
±.4pF
±.7pF
3.0pF
±0.1pF GQM2195C2E1R0BB12#
±0.±5pF GQM2195C2E1R0CB12#
±0.1pF GQM2195C2E1R1BB12#
±0.±5pF GQM2195C2E1R1CB12#
±0.1pF GQM2195C2E1R2BB12#
±0.±5pF GQM2195C2E1R2CB12#
±0.1pF GQM2195C2E1R3BB12#
±0.±5pF GQM2195C2E1R3CB12#
±0.1pF GQM2195C2E1R5BB12#
±0.±5pF GQM2195C2E1R5CB12#
±0.1pF GQM2195C2E1R6BB12#
±0.±5pF GQM2195C2E1R6CB12#
±0.1pF GQM2195C2E1R8BB12#
±0.±5pF GQM2195C2E1R8CB12#
±0.1pF GQM2195C2E2R0BB12#
±0.±5pF GQM2195C2E2R0CB12#
±0.1pF GQM2195C2E2R2BB12#
±0.±5pF GQM2195C2E2R2CB12#
±0.1pF GQM2195C2E2R4BB12#
±0.±5pF GQM2195C2E2R4CB12#
±0.1pF GQM2195C2E2R7BB12#
±0.±5pF GQM2195C2E2R7CB12#
±0.1pF GQM2195C2E3R0BB12#
8.±pF ±0.±5pF GQM2195C2E8R2CB12#
±0.5pF GQM2195C2E8R2DB12#
9.0pF ±0.±5pF GQM2195C2E9R0CB12#
±0.5pF GQM2195C2E9R0DB12#
9.1pF ±0.±5pF GQM2195C2E9R1CB12#
±0.5pF GQM2195C2E9R1DB12#
10pF
11pF
1±pF
13pF
15pF
16pF
18pF
±0pF
±±pF
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
±5ꢀ
±±ꢀ
GQM2195C2E100GB12#
GQM2195C2E100JB12#
GQM2195C2E110GB12#
GQM2195C2E110JB12#
GQM2195C2E120GB12#
GQM2195C2E120JB12#
GQM2195C2E130GB12#
GQM2195C2E130JB12#
GQM2195C2E150GB12#
GQM2195C2E150JB12#
GQM2195C2E160GB12#
GQM2195C2E160JB12#
GQM2195C2E180GB12#
GQM2195C2E180JB12#
GQM2195C2E200GB12#
GQM2195C2E200JB12#
GQM2195C2E220GB12#
Part number # indicates the package specification code.
110
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
HiQ
GQM Series Temperature Compensating Type
Part Number List
→
(
2.0×1.25mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
1mm 250Vdc C0G
22pF
24pF
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
GQM2195C2E220JB12#
GQM2195C2E240GB12#
GQM2195C2E240JB12#
GQM2195C2E270GB12#
GQM2195C2E270JB12#
GQM2195C2E300GB12#
GQM2195C2E300JB12#
GQM2195C2E330GB12#
GQM2195C2E330JB12#
GQM2195C2E360GB12#
GQM2195C2E360JB12#
GQM2195C2E390GB12#
GQM2195C2E390JB12#
GQM2195C2E430GB12#
GQM2195C2E430JB12#
GQM2195C2E470GB12#
GQM2195C2E470JB12#
GQM2195C2E510GB12#
GQM2195C2E510JB12#
GQM2195C2E560GB12#
GQM2195C2E560JB12#
GQM2195C2E620GB12#
GQM2195C2E620JB12#
GQM2195C2E680GB12#
GQM2195C2E680JB12#
GQM2195C2E750GB12#
GQM2195C2E750JB12#
GQM2195C2E820GB12#
GQM2195C2E820JB12#
GQM2195C2E910GB12#
GQM2195C2E910JB12#
GQM2195C2E101GB12#
GQM2195C2E101JB12#
1.35mm 500Vdc C0G 1.8pF
0.1pF GQM22M5C2H1R8BB01#
0.25pF GQM22M5C2H1R8CB01#
0.1pF GQM22M5C2H2R0BB01#
0.25pF GQM22M5C2H2R0CB01#
0.1pF GQM22M5C2H2R2BB01#
0.25pF GQM22M5C2H2R2CB01#
0.1pF GQM22M5C2H2R4BB01#
0.25pF GQM22M5C2H2R4CB01#
0.1pF GQM22M5C2H2R7BB01#
0.25pF GQM22M5C2H2R7CB01#
0.1pF GQM22M5C2H3R0BB01#
0.25pF GQM22M5C2H3R0CB01#
0.1pF GQM22M5C2H3R3BB01#
0.25pF GQM22M5C2H3R3CB01#
0.1pF GQM22M5C2H3R6BB01#
0.25pF GQM22M5C2H3R6CB01#
0.1pF GQM22M5C2H3R9BB01#
0.25pF GQM22M5C2H3R9CB01#
0.1pF GQM22M5C2H4R0BB01#
0.25pF GQM22M5C2H4R0CB01#
0.1pF GQM22M5C2H4R3BB01#
0.25pF GQM22M5C2H4R3CB01#
0.1pF GQM22M5C2H4R7BB01#
0.25pF GQM22M5C2H4R7CB01#
0.1pF GQM22M5C2H5R0BB01#
0.25pF GQM22M5C2H5R0CB01#
0.25pF GQM22M5C2H5R1CB01#
0.5pF GQM22M5C2H5R1DB01#
0.25pF GQM22M5C2H5R6CB01#
0.5pF GQM22M5C2H5R6DB01#
0.25pF GQM22M5C2H6R0CB01#
0.5pF GQM22M5C2H6R0DB01#
0.25pF GQM22M5C2H6R2CB01#
0.5pF GQM22M5C2H6R2DB01#
0.25pF GQM22M5C2H6R8CB01#
0.5pF GQM22M5C2H6R8DB01#
0.25pF GQM22M5C2H7R0CB01#
0.5pF GQM22M5C2H7R0DB01#
0.25pF GQM22M5C2H7R5CB01#
0.5pF GQM22M5C2H7R5DB01#
0.25pF GQM22M5C2H8R0CB01#
0.5pF GQM22M5C2H8R0DB01#
0.25pF GQM22M5C2H8R2CB01#
0.5pF GQM22M5C2H8R2DB01#
0.25pF GQM22M5C2H9R0CB01#
0.5pF GQM22M5C2H9R0DB01#
0.25pF GQM22M5C2H9R1CB01#
0.5pF GQM22M5C2H9R1DB01#
2.0pF
2.2pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.1pF
5.6pF
6.0pF
6.2pF
6.8pF
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
27pF
30pF
33pF
36pF
39pF
43pF
47pF
51pF
56pF
62pF
68pF
75pF
82pF
91pF
100pF
2.8×2.8mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
1.35mm 500Vdc C0G 0.5pF
0.1pF GQM22M5C2HR50BB01#
0.25pF GQM22M5C2HR50CB01#
0.1pF GQM22M5C2HR75BB01#
0.25pF GQM22M5C2HR75CB01#
0.1pF GQM22M5C2H1R0BB01#
0.25pF GQM22M5C2H1R0CB01#
0.1pF GQM22M5C2H1R1BB01#
0.25pF GQM22M5C2H1R1CB01#
0.1pF GQM22M5C2H1R2BB01#
0.25pF GQM22M5C2H1R2CB01#
0.1pF GQM22M5C2H1R3BB01#
0.25pF GQM22M5C2H1R3CB01#
0.1pF GQM22M5C2H1R5BB01#
0.25pF GQM22M5C2H1R5CB01#
0.1pF GQM22M5C2H1R6BB01#
0.25pF GQM22M5C2H1R6CB01#
0.75pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
1.6pF
2ꢀ
5ꢀ
2ꢀ
5ꢀ
2ꢀ
5ꢀ
GQM22M5C2H100GB01#
GQM22M5C2H100JB01#
GQM22M5C2H110GB01#
GQM22M5C2H110JB01#
GQM22M5C2H120GB01#
GQM22M5C2H120JB01#
11pF
12pF
Part number # indicates the package specification code.
111
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C0±E.pdf
Oct.1,±01±
HiQ
GQM Series Temperature Compensating Type
Part Number List
→
(
2.8×2.8mm)
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
1.35mm 500Vdc C0G
13pF
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
±±2
±52
GQM22M5C2H130GB01#
GQM22M5C2H130JB01#
GQM22M5C2H150GB01#
GQM22M5C2H150JB01#
GQM22M5C2H160GB01#
GQM22M5C2H160JB01#
GQM22M5C2H180GB01#
GQM22M5C2H180JB01#
GQM22M5C2H200GB01#
GQM22M5C2H200JB01#
GQM22M5C2H220GB01#
GQM22M5C2H220JB01#
GQM22M5C2H240GB01#
GQM22M5C2H240JB01#
GQM22M5C2H270GB01#
GQM22M5C2H270JB01#
GQM22M5C2H300GB01#
GQM22M5C2H300JB01#
GQM22M5C2H330GB01#
GQM22M5C2H330JB01#
GQM22M5C2H360GB01#
GQM22M5C2H360JB01#
GQM22M5C2H390GB01#
GQM22M5C2H390JB01#
GQM22M5C2H430GB01#
GQM22M5C2H430JB01#
GQM22M5C2H470GB01#
GQM22M5C2H470JB01#
GQM22M5C2H510GB01#
GQM22M5C2H510JB01#
GQM22M5C2H560GB01#
GQM22M5C2H560JB01#
GQM22M5C2H620GB01#
GQM22M5C2H620JB01#
GQM22M5C2H680GB01#
GQM22M5C2H680JB01#
GQM22M5C2H750GB01#
GQM22M5C2H750JB01#
GQM22M5C2H820GB01#
GQM22M5C2H820JB01#
GQM22M5C2H910GB01#
GQM22M5C2H910JB01#
GQM22M5C2H101GB01#
GQM22M5C2H101JB01#
15pF
16pF
18pF
±0pF
±±pF
±4pF
±7pF
30pF
33pF
36pF
39pF
43pF
47pF
51pF
56pF
6±pF
68pF
75pF
8±pF
91pF
100pF
Part number # indicates the package specification code.
11±
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Monolithic Microchip GMA Series
Capacitor for wire bonding. Can also be mounted directly to a frame!!
T
W
L
1
2
3
Excellent high frequency characteristics.
Ideal for bypass applications.
High density mounting is possible.
113
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GMA Series High Dielectric Constant Type Part Number List
T
Rated
TC
Ultra-
Cap.
Tol.
Part Number
0.38×0.38mm
c
compact
max. Voltage Code
0.6mm 10Vdc X7R 33000pF
20ꢀ GMA085R71A333MA01#
20ꢀ GMA085R71A473MA01#
20ꢀ GMA085R71A683MA01#
20ꢀ GMA085R71A104MA01#
20ꢀ GMA085R11A333MA01#
20ꢀ GMA085R11A473MA01#
20ꢀ GMA085R11A683MA01#
20ꢀ GMA085R11A104MA01#
20ꢀ GMA085B11A333MA01#
20ꢀ GMA085B11A473MA01#
20ꢀ GMA085B11A683MA01#
20ꢀ GMA085B11A104MA01#
20ꢀ GMA085R60J474ME12#
20ꢀ GMA085B30J474ME12#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
47000pF
68000pF
0.1µF
0.35mm 10Vdc X7R 10000pF
10000pF
20ꢀ GMA0D3R71A103MA01#
20ꢀ GMA0D3R11A103MA01#
R
R
B
33000pF
47000pF
68000pF
0.1µF
Ultra-
0.5×0.5mm
c
compact
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
33000pF
47000pF
68000pF
0.1µF
0.4mm 100Vdc X7R 100pF
20ꢀ GMA05XR72A101MA01#
20ꢀ GMA05XR72A151MA01#
20ꢀ GMA05XR72A221MA01#
20ꢀ GMA05XR72A331MA01#
20ꢀ GMA05XR72A471MA01#
20ꢀ GMA05XR72A681MA01#
20ꢀ GMA05XR72A102MA01#
20ꢀ GMA05XR71E152MA11#
20ꢀ GMA05XR71E222MA11#
20ꢀ GMA05XR71E332MA11#
20ꢀ GMA05XR71E472MA11#
20ꢀ GMA05XB31E152MA11#
20ꢀ GMA05XB31E222MA11#
20ꢀ GMA05XB31E332MA11#
20ꢀ GMA05XB31E472MA11#
20ꢀ GMA05XR71A682MA01#
20ꢀ GMA05XR71A103MA01#
20ꢀ GMA05XR71A153MA01#
20ꢀ GMA05XR71A223MA01#
20ꢀ GMA05XR11A682MA01#
20ꢀ GMA05XR11A103MA01#
20ꢀ GMA05XR11A153MA01#
20ꢀ GMA05XR11A223MA01#
20ꢀ GMA05XB11A682MA01#
20ꢀ GMA05XB11A103MA01#
20ꢀ GMA05XB11A153MA01#
20ꢀ GMA05XB11A223MA01#
20ꢀ GMA05XR60J104ME12#
20ꢀ GMA05XB30J104ME12#
150pF
220pF
330pF
6.3Vdc X5R 0.47µF
0.47µF
470pF
B
680pF
1000pF
25Vdc X7R 1500pF
2200pF
3300pF
4700pF
B
1500pF
2200pF
3300pF
4700pF
10Vdc X7R 6800pF
10000pF
15000pF
22000pF
R
B
6800pF
10000pF
15000pF
22000pF
6800pF
10000pF
15000pF
22000pF
6.3Vdc X5R 0.1µF
B
0.1µF
0.8×0.8mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.6mm 100Vdc X7R 1500pF
20ꢀ GMA085R72A152MA01#
20ꢀ GMA085R72A222MA01#
20ꢀ GMA085R72A332MA01#
20ꢀ GMA085R72A472MA01#
20ꢀ GMA085R72A682MA01#
20ꢀ GMA085R71E103MA11#
20ꢀ GMA085R71E153MA11#
20ꢀ GMA085R71E223MA11#
20ꢀ GMA085B31E103MA11#
20ꢀ GMA085B31E153MA11#
20ꢀ GMA085B31E223MA11#
2200pF
3300pF
4700pF
6800pF
25Vdc X7R 10000pF
15000pF
22000pF
B
10000pF
15000pF
22000pF
Part number # indicates the package specification code.
114
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
For Bonding GMD Series
Capacitor for wire bonding. Compatible up to 0.6x0.3mm size!!
e
g
e
T
W
L
1
2
3
Compact product sizes of 0.6x0.3x0.3mm, 1.0x0.5x0.5mm
Can be mounted by wire bonding and AuSn soldering.
Ideal for mounting in optical communication related devices and IC packages.
115
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GMD Series High Dielectric Constant Type Part Number List
T
Rated
TC
Ultra-
Cap.
Tol.
Part Number
0.6×0.3mm
c
compact
max. Voltage Code
0.33mm 16Vdc
R
B
3300pF
1800pF
2200pF
2700pF
3300pF
10ꢀ GMD033R11C332KA11#
10ꢀ GMD033B31C182KA11#
10ꢀ GMD033B31C222KA11#
10ꢀ GMD033B31C272KA11#
10ꢀ GMD033B31C332KA11#
10ꢀ GMD033R71A392KA01#
10ꢀ GMD033R71A472KA01#
10ꢀ GMD033R71A562KA01#
10ꢀ GMD033R71A682KA01#
10ꢀ GMD033R71A822KA01#
10ꢀ GMD033R71A103KA01#
10ꢀ GMD033R11A392KA01#
10ꢀ GMD033R11A472KA01#
10ꢀ GMD033R11A562KA01#
10ꢀ GMD033R11A682KA01#
10ꢀ GMD033R11A822KA01#
10ꢀ GMD033R11A103KA01#
10ꢀ GMD033B11A392KA01#
10ꢀ GMD033B11A472KA01#
10ꢀ GMD033B11A562KA01#
10ꢀ GMD033B11A682KA01#
10ꢀ GMD033B11A822KA01#
10ꢀ GMD033B11A103KA01#
10ꢀ GMD033R60J563KE11#
10ꢀ GMD033R60J683KE11#
10ꢀ GMD033R60J823KE11#
10ꢀ GMD033R60J104KE11#
10ꢀ GMD033B30J563KE11#
10ꢀ GMD033B30J683KE11#
10ꢀ GMD033B30J823KE11#
10ꢀ GMD033B30J104KE11#
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.33mm 25Vdc X7R 100pF
10ꢀ GMD033R71E101KA01#
10ꢀ GMD033R71E121KA01#
10ꢀ GMD033R71E151KA01#
10ꢀ GMD033R71E181KA01#
10ꢀ GMD033R71E221KA01#
10ꢀ GMD033R71E271KA01#
10ꢀ GMD033R71E331KA01#
10ꢀ GMD033R71E391KA01#
10ꢀ GMD033R71E471KA01#
10ꢀ GMD033R71E561KA01#
10ꢀ GMD033R71E681KA01#
10ꢀ GMD033R71E821KA01#
10ꢀ GMD033R71E102KA01#
10ꢀ GMD033R71E122KA01#
10ꢀ GMD033R71E152KA01#
10ꢀ GMD033R11E101KA01#
10ꢀ GMD033R11E121KA01#
10ꢀ GMD033R11E151KA01#
10ꢀ GMD033R11E181KA01#
10ꢀ GMD033R11E221KA01#
10ꢀ GMD033R11E271KA01#
10ꢀ GMD033R11E331KA01#
10ꢀ GMD033R11E391KA01#
10ꢀ GMD033R11E471KA01#
10ꢀ GMD033R11E561KA01#
10ꢀ GMD033R11E681KA01#
10ꢀ GMD033R11E821KA01#
10ꢀ GMD033R11E102KA01#
10ꢀ GMD033R11E122KA01#
10ꢀ GMD033R11E152KA01#
10ꢀ GMD033B11E101KA01#
10ꢀ GMD033B11E121KA01#
10ꢀ GMD033B11E151KA01#
10ꢀ GMD033B11E181KA01#
10ꢀ GMD033B11E221KA01#
10ꢀ GMD033B11E271KA01#
10ꢀ GMD033B11E331KA01#
10ꢀ GMD033B11E391KA01#
10ꢀ GMD033B11E471KA01#
10ꢀ GMD033B11E561KA01#
10ꢀ GMD033B11E681KA01#
10ꢀ GMD033B11E821KA01#
10ꢀ GMD033B11E102KA01#
10ꢀ GMD033B11E122KA01#
10ꢀ GMD033B11E152KA01#
10ꢀ GMD033R71C182KA11#
10ꢀ GMD033R71C222KA11#
10ꢀ GMD033R71C272KA11#
10ꢀ GMD033R71C332KA11#
10ꢀ GMD033R11C182KA11#
10ꢀ GMD033R11C222KA11#
10ꢀ GMD033R11C272KA11#
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
10Vdc X7R 3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
R
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
3900pF
4700pF
5600pF
6800pF
8200pF
10000pF
R
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
B
6.3Vdc X5R 56000pF
68000pF
82000pF
0.1µF
B
56000pF
68000pF
82000pF
0.1µF
B
1.0×0.5mm
c
T
Rated
TC
Cap.
Tol.
Part Number
max. Voltage Code
0.55mm 50Vdc X7R 220pF
10ꢀ GMD155R71H221KA01#
10ꢀ GMD155R71H271KA01#
10ꢀ GMD155R71H331KA01#
10ꢀ GMD155R71H391KA01#
10ꢀ GMD155R71H471KA01#
10ꢀ GMD155R71H561KA01#
10ꢀ GMD155R71H681KA01#
10ꢀ GMD155R71H821KA01#
10ꢀ GMD155R71H102KA01#
10ꢀ GMD155R71H122KA01#
10ꢀ GMD155R71H152KA01#
10ꢀ GMD155R71H182KA01#
10ꢀ GMD155R71H222KA01#
10ꢀ GMD155R71H272KA01#
10ꢀ GMD155R71H332KA01#
10ꢀ GMD155R71H392KA01#
10ꢀ GMD155R71H472KA01#
10ꢀ GMD155R11H221KA01#
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
16Vdc X7R 1800pF
2200pF
2700pF
3300pF
R
1800pF
2200pF
2700pF
R
220pF
Part number # indicates the package specification code.
116
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.±,20±2
GMD Series High Dielectric Constant Type Part Number List
→
(
1.0×0.5mm)
c
T
Rated
TC
T
Rated
TC
Cap.
Tol.
Part Number
Cap.
Tol.
Part Number
max. Voltage Code
max. Voltage Code
0.55mm 50Vdc R
270pF
330pF
±±0ꢀ GMD155R11H271KA01#
±±0ꢀ GMD155R11H331KA01#
±±0ꢀ GMD155R11H391KA01#
±±0ꢀ GMD155R11H471KA01#
±±0ꢀ GMD155R11H561KA01#
±±0ꢀ GMD155R11H681KA01#
±±0ꢀ GMD155R11H821KA01#
±±0ꢀ GMD155R11H102KA01#
±±0ꢀ GMD155R11H122KA01#
±±0ꢀ GMD155R11H152KA01#
±±0ꢀ GMD155R11H182KA01#
±±0ꢀ GMD155R11H222KA01#
±±0ꢀ GMD155R11H272KA01#
±±0ꢀ GMD155R11H332KA01#
±±0ꢀ GMD155R11H392KA01#
±±0ꢀ GMD155R11H472KA01#
±±0ꢀ GMD155B11H221KA01#
±±0ꢀ GMD155B11H271KA01#
±±0ꢀ GMD155B11H331KA01#
±±0ꢀ GMD155B11H391KA01#
±±0ꢀ GMD155B11H471KA01#
±±0ꢀ GMD155B11H561KA01#
±±0ꢀ GMD155B11H681KA01#
±±0ꢀ GMD155B11H821KA01#
±±0ꢀ GMD155B11H102KA01#
±±0ꢀ GMD155B11H122KA01#
±±0ꢀ GMD155B11H152KA01#
±±0ꢀ GMD155B11H182KA01#
±±0ꢀ GMD155B11H222KA01#
±±0ꢀ GMD155B11H272KA01#
±±0ꢀ GMD155B11H332KA01#
±±0ꢀ GMD155B11H392KA01#
±±0ꢀ GMD155B11H472KA01#
±±0ꢀ GMD155R71E562KA01#
±±0ꢀ GMD155R71E682KA01#
±±0ꢀ GMD155R71E822KA01#
0.55mm 25Vdc
R
B
33000pF ±±0ꢀ GMD155R11E333KA11#
39000pF ±±0ꢀ GMD155R11E393KA11#
47000pF ±±0ꢀ GMD155R11E473KA11#
390pF
470pF
5600pF
6800pF
8200pF
±±0ꢀ GMD155B11E562KA01#
±±0ꢀ GMD155B11E682KA01#
±±0ꢀ GMD155B11E822KA01#
560pF
680pF
820pF
±0000pF ±±0ꢀ GMD155B11E103KA01#
±2000pF ±±0ꢀ GMD155B11E123KA01#
±5000pF ±±0ꢀ GMD155B11E153KA01#
±8000pF ±±0ꢀ GMD155B11E183KA01#
22000pF ±±0ꢀ GMD155B11E223KA01#
27000pF ±±0ꢀ GMD155B31E273KA11#
33000pF ±±0ꢀ GMD155B31E333KA11#
39000pF ±±0ꢀ GMD155B31E393KA11#
47000pF ±±0ꢀ GMD155B31E473KA11#
±000pF
±200pF
±500pF
±800pF
2200pF
2700pF
3300pF
3900pF
4700pF
220pF
±6Vdc X7R 56000pF ±±0ꢀ GMD155R71C563KA11#
68000pF ±±0ꢀ GMD155R71C683KA11#
B
270pF
82000pF ±±0ꢀ GMD155R71C823KA11#
330pF
0.±µF
±±0ꢀ GMD155R71C104KA11#
390pF
R
B
56000pF ±±0ꢀ GMD155R11C563KA11#
68000pF ±±0ꢀ GMD155R11C683KA11#
82000pF ±±0ꢀ GMD155R11C823KA11#
470pF
560pF
680pF
0.±µF
±±0ꢀ GMD155R11C104KA11#
820pF
56000pF ±±0ꢀ GMD155B31C563KA11#
68000pF ±±0ꢀ GMD155B31C683KA11#
82000pF ±±0ꢀ GMD155B31C823KA11#
±000pF
±200pF
±500pF
±800pF
2200pF
2700pF
3300pF
3900pF
4700pF
0.±µF
±±0ꢀ GMD155B31C104KA11#
±±0ꢀ GMD155R61A124KE12#
±±0ꢀ GMD155R61A154KE12#
±±0ꢀ GMD155R61A184KE12#
±±0ꢀ GMD155R61A224KE12#
±±0ꢀ GMD155R61A274KE11#
±±0ꢀ GMD155R61A334KE11#
±±0ꢀ GMD155R61A394KE11#
±±0ꢀ GMD155R61A474KE11#
±±0ꢀ GMD155B31A124KE12#
±±0ꢀ GMD155B31A154KE12#
±±0ꢀ GMD155B31A184KE12#
±±0ꢀ GMD155B31A224KE12#
±±0ꢀ GMD155B31A274KE11#
±±0ꢀ GMD155B31A334KE11#
±±0ꢀ GMD155B31A394KE11#
±±0ꢀ GMD155B31A474KE11#
±0Vdc X5R 0.±2µF
0.±5µF
0.±8µF
0.22µF
0.27µF
0.33µF
25Vdc X7R 5600pF
6800pF
0.39µF
0.47µF
8200pF
B
0.±2µF
0.±5µF
0.±8µF
0.22µF
0.27µF
0.33µF
0.39µF
0.47µF
±0000pF ±±0ꢀ GMD155R71E103KA01#
±2000pF ±±0ꢀ GMD155R71E123KA01#
±5000pF ±±0ꢀ GMD155R71E153KA01#
±8000pF ±±0ꢀ GMD155R71E183KA01#
22000pF ±±0ꢀ GMD155R71E223KA01#
27000pF ±±0ꢀ GMD155R71E273KA11#
33000pF ±±0ꢀ GMD155R71E333KA11#
39000pF ±±0ꢀ GMD155R71E393KA11#
47000pF ±±0ꢀ GMD155R71E473KA11#
R
5600pF
6800pF
8200pF
±±0ꢀ GMD155R11E562KA01#
±±0ꢀ GMD155R11E682KA01#
±±0ꢀ GMD155R11E822KA01#
±0000pF ±±0ꢀ GMD155R11E103KA01#
±2000pF ±±0ꢀ GMD155R11E123KA01#
±5000pF ±±0ꢀ GMD155R11E153KA01#
±8000pF ±±0ꢀ GMD155R11E183KA01#
22000pF ±±0ꢀ GMD155R11E223KA01#
27000pF ±±0ꢀ GMD155R11E273KA11#
Part number # indicates the package specification code.
±±7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
For General
!Caution/Notice
Notice
!Caution
........................
....................................................................
c Storage and Operation Conditions
119
c Rating
129
129
129
129
.....................................
.................................
1. Operating Temperature
....................................................................
c Rating
1. Temperature Dependent Characteristics
............................
119
119
120
120
2. Atmosphere Surroundings
3. Piezo-electric Phenomenon
...........
...............................
2. Measurement of Capacitance
.................................................
........................................
3. Applied Voltage
c Soldering and Mounting
129
129
129
130
131
132
132
132
132
133
.......................................................
4. Applied Voltage and
Self-heating Temperature
1. PCB Design
..................................
120
121
121
122
...............................
1. Notice for Pattern Forms
.......
5. DC Voltage and AC Voltage Characteristic
...........................................
.........................................
2. Land Dimensions
............................................
6. Capacitance Aging
7. Vibration and Shock
2. Adhesive Application
..........................................
................................................
3. Adhesive Curing
4. Flux Application
.................................................
........................................
c Soldering and Mounting
122
122
123
...................................................
5. Flow Soldering
..............................................
1. Mounting Position
.............................................................
6. Washing
..............................................................
..............................
2. Information before Mounting
7. Coating
8. Die Bonding/Wire Bonding
3. Maintenance of the Mounting (pick and place)
.............................................................
Machine
123
124
125
126
126
126
127
127
.......................................
(GMA or GMD Series)
133
............................................
4-1. Reflow Soldering
................................................
4-2. Flow Soldering
....................................................................
c Others
133
133
.....................
4-3. Correction with a Soldering Iron
...................................................
1. Transportation
.........................
4-4. Leaded Component Insertion
.............................................................
5. Washing
.............
6. Electrical Test on Printed Circuit Board
..........................
7. Printed Circuit Board Cropping
....................................................................
c Others
1. Under Operation of Equipment
................................................................
128
128
128
..........................
2. Others
118
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
c Storage and Operation Conditions
1. The performance of chip monolithic ceramic capacitors
may be affected by the storage conditions.
1-1. Store capacitors in the following conditions:
Temperature of +5°C to +40°C and a Relative
Humidity of 20% to 70%.
1-2. Corrosive gas can react with the termination
(external) electrodes or lead wires of capacitors, and
result in poor solderability. Do not store the
capacitors in an atmosphere consisting of corrosive
gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine,
ammonia gas, etc.).
(1) Sunlight, dust, rapid temperature changes,
corrosive gas atmosphere or high temperature
and humidity conditions during storage may affect
solderability and packaging performance.
1-3. Due to moisture condensation caused by rapid
humidity changes, or the photochemical change
caused by direct sunlight on the terminal electrodes
and/or the resin/epoxy coatings, the solderability and
electrical performance may deteriorate. Do not store
capacitors under direct sunlight or in high humidity
conditions.
Please use product within six months of receipt.
(2) Please confirm solderability before using after six
months. Store the capacitors without opening the
original bag. Even if the storage period is short, do
not exceed the specified atmospheric conditions.
c Rating
1. Temperature Dependent Characteristics
1. The electrical characteristics of the capacitor can change
(2) The capacitance may change within the rated
temperature.
with temperature.
1-1. For capacitors having larger temperature
dependency, the capacitance may change with
temperature changes.
When you use a high dielectric constant type
capacitor in a circuit that needs a tight (narrow)
capacitance tolerance (e.g., a time-constant
circuit), please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
In addition, check capacitors using your actual
appliances at the intended environment and
operating conditions.
The following actions are recommended in order to
ensure suitable capacitance values.
(1) Select a suitable capacitance for the operating
temperature range.
Typical Temperature Characteristics R6(X5R)
Typical Temperature Characteristics R7(X7R)
20
15
10
5
20
15
10
5
0
0
-5
-5
-10
-15
-20
-10
-15
-20
-75
-50
-25
0
25
50
75
100
-75
-50
-25
0
25
50
75 100
125 150
Temperature (°C)
Temperature (°C)
Typical Temperature Characteristics F5(Y5V)
40
20
0
-20
-40
-60
-80
-100
-50
-25
0
25
50
75
100
Temperature (°C)
Continued on the following page.
119
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
2. Measurement of Capacitance
1. Measure capacitance with the voltage and the frequency
1-2. The capacitance values of high dielectric constant
specified in the product specifications.
type capacitors change depending on the AC voltage
applied. Please consider the AC voltage
characteristics when selecting a capacitor to be used
in an AC circuit.
1-1. The output voltage of the measuring equipment may
decrease occasionally when capacitance is high.
Please confirm whether a prescribed measured
voltage is impressed to the capacitor.
3. Applied Voltage
1. Do not apply a voltage to the capacitor that exceeds the
rated voltage as called out in the specifications.
1-1. Applied voltage between the terminals of a capacitor
shall be less than or equal to the rated voltage.
(1) When AC voltage is superimposed on DC voltage,
the zero-to-peak voltage shall not exceed the
rated DC voltage.
When AC voltage or pulse voltage is applied, the
peak-to-peak voltage shall not exceed the rated
DC voltage.
(2) Abnormal voltages (surge voltage, static
electricity, pulse voltage, etc.) shall not exceed
the rated DC voltage.
Typical Voltage Applied to the DC Capacitor
DC Voltage
DC Voltage+AC
AC Voltage
Pulse Voltage
0
E
E
E
E
0
0
0
(E: Maximum possible applied voltage.)
1-2. Influence of overvoltage
Overvoltage that is applied to the capacitor may
result in an electrical short circuit caused by the
breakdown of the internal dielectric layers.
The time duration until breakdown depends on the
applied voltage and the ambient temperature.
4. Applied Voltage and Self-heating Temperature
1. When the capacitor is used in a high-frequency voltage,
pulse voltage, application, be sure to take into account
self-heating may be caused by resistant factors of the
capacitor.
1-1. The load should be contained to the level such that
when measuring at atmospheric temperature of 25°C,
the product's self-heating remains below 20°C and
surface temperature of the capacitor in the actual
circuit remains within the maximum operating
temperature.
Continued on the following page.
120
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
5. DC Voltage and AC Voltage Characteristics
1. The capacitance value of a high dielectric constant type
[DC Voltage Characteristics]
capacitor changes depending on the DC voltage applied.
Please consider the DC voltage characteristics when a
capacitor is selected for use in a DC circuit.
1-1. The capacitance of ceramic capacitors may change
sharply depending on the applied voltage (see
figure).
20
0
-20
-40
-60
-80
-100
Please confirm the following in order to secure the
capacitance.
(1) Determine whether the capacitance change
caused by the applied voltage is within the
allowed range.
0
1
2
3
4
5
6
7
DC Voltage (VDC)
(2) In the DC voltage characteristics, the rate of
capacitance change becomes larger as voltage
increases, even if the applied voltage is below
the rated voltage. When a high dielectric constant
type capacitor is in a circuit that needs a tight
(narrow) capacitance tolerance (e.g., a time-
constant circuit), please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
In addition, check capacitors using your actual
appliances at the intended environment and
operating conditions.
2. The capacitance values of high dielectric constant type
capacitors change depending on the AC voltage applied.
Please consider the AC voltage characteristics when
selecting a capacitor to be used in an AC circuit.
[AC Voltage Characteristics]
30
20
10
0
-10
-20
-30
-40
-50
-60
0.0
0.5
1.0
1.5
2.0
2.5
AC Voltage (Vr.m.s.)
6. Capacitance Aging
1. The high dielectric constant type capacitors have the
characteristic in which the capacitance value decreases
with the passage of time.
20
10
When you use a high dielectric constant type capacitors
in a circuit that needs a tight (narrow) capacitance
tolerance (e.g., a time-constant circuit), please carefully
consider the characteristics of these capacitors, such as
their aging, voltage, and temperature characteristics. In
addition, check capacitors using your actual appliances at
the intended environment and operating conditions.
0
-10
-20
-30
-40
5C
RΔ
10
100
1000
10000
Time (Hr)
Continued on the following page.
121
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
7. Vibration and Shock
1. Please confirm the kind of vibration and/or shock, its
condition, and any generation of resonance.
Please mount the capacitor so as not to generate
resonance, and do not allow any impact on the terminals.
2. Mechanical shock due to being dropped may cause
damage or a crack in the dielectric material of the
capacitor.
Crack
Do not use a dropped capacitor because the quality and
reliability may be deteriorated.
Floor
3. When printed circuit boards are piled up or handled, the
corner of another printed circuit board should not be
allowed to hit the capacitor, in order to avoid a crack or
other damage to the capacitor.
Mounting printed circuit board
Crack
c Soldering and Mounting
1. Mounting Position
1. Confirm the best mounting position and direction that
minimizes the stress imposed on the capacitor during
flexing or bending the printed circuit board.
1-1. Choose a mounting position that minimizes the
stress imposed on the chip during flexing or bending
of the board.
[Component Direction]
Locate chip
horizontal to the
direction in
which stress
acts.
[Chip Mounting Close to Board Separation Point]
C
Chip arrangement
Worst A-C-(B~D) Best
Perforation
B
D
A
Slit
Continued on the following page.
122
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
2. Information before Mounting
1. Do not reuse capacitors that were removed from the
equipment.
2. Confirm capacitance characteristics under actual applied
voltage.
3. Confirm the mechanical stress under actual process and
equipment use.
4. Confirm the rated capacitance, rated voltage and other
electrical characteristics before assembly.
5. Prior to use, confirm the solderability of capacitors that
were in long-term storage.
6. Prior to measuring capacitance, carry out a heat
treatment for capacitors that were in long-term storage.
7. The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
3. Maintenance of the Mounting (pick and place) Machine
1. Make sure that the following excessive forces are not
applied to the capacitors.
[Incorrect]
[Correct]
Suction Nozzle
1-1. In mounting the capacitors on the printed circuit
board, any bending force against them shall be kept
to a minimum to prevent them from any bending
damage or cracking. Please take into account the
following precautions and recommendations for use
in your process.
Deflection
Board
Board Guide
(1) Adjust the lowest position of the pickup nozzle so
as not to bend the printed circuit board.
(2) Adjust the nozzle pressure within a static load of
1N to 3N during mounting.
Support Pin
2. Dirt particles and dust accumulated between the suction
nozzle and the cylinder inner wall prevent the nozzle from
moving smoothly. This imposes greater force upon the
chip during mounting, causing cracked chips. Also, the
locating claw, when worn out, imposes uneven forces on
the chip when positioning, causing cracked chips. The
suction nozzle and the locating claw must be maintained,
checked and replaced periodically.
Continued on the following page.
123
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
4-1. Reflow Soldering
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both the components and the PCB board.
Preheating conditions are shown in table 1. It is required to
keep the temperature differential between the solder and
the component's surface (ΔT) as small as possible.
2. Solderability of tin plating termination chips might be
deteriorated when a low temperature soldering profile
where the peak solder temperature is below the melting
point of tin is used. Please confirm the solderability of tin
plated termination chips before use.
[Standard Conditions for Reflow Soldering]
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
ΔT
170°C
150°C
130°C
Preheating
Time
60-120 seconds 30-60 seconds
3. When components are immersed in solvent after mounting,
be sure to maintain the temperature difference (ΔT)
between the component and the solvent within the range
shown in the table 1.
Vapor Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
ΔT
170°C
150°C
130°C
Table 1
Part Number
GRM02/03/15/18/21/31
GJM02/03/15
LLL15/18/21/31
LLR18
Temperature Differential
Preheating
ΔTV190°C
Time
20 seconds max.
60-120 seconds
GQM18/21
GRM32/43/55
LLA18/21/31
LLM21/31
[Allowable Reflow Soldering Temperature and Time]
280
270
260
250
240
ΔTV130°C
GNM
GQM22
Recommended Conditions
230
220
Pb-Sn Solder
Lead Free Solder
0
30
60
90
120
Infrared Reflow Vapor Reflow
Soldering Time (sec.)
Peak Temperature 230 to 250°C 230 to 240°C
240 to 260°C
Air or N2
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Atmosphere
Air
Air
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
4. Optimum Solder Amount for Reflow Soldering
4-1. Overly thick application of solder paste results in a
excessive solder fillet height.
This makes the chip more susceptible to mechanical
and thermal stress on the board and may cause the
chips to crack.
∗
0.2mm min.
4-2. Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in
chips breaking loose from the PCB.
∗
GRM02/03: 1/3 of Chip Thickness min.
in section
4-3. Make sure the solder has been applied smoothly to
the end surface to a height of 0.2mm* min.
Inverting the PCB
Make sure not to impose any abnormal mechanical shocks
to the PCB.
Continued on the following page.
124
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
4-2. Flow Soldering
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage in the components, preheating
should be required for both of the components and the
PCB board.
[Standard Conditions for Flow Soldering]
Temperature (D)
Soldering
Soldering
Peak
Temperature
Gradual
Cooling
ΔT
Preheating
Peak
Temperature
Preheating conditions are shown in table 2. It is required
to keep the temperature differential between the solder
and the component's surface (ΔT) as small as possible.
2. Excessively long soldering time or high soldering
temperature can result in leaching of the outer electrodes,
causing poor adhesion or a reduction in capacitance
value due to loss of contact between electrodes and end
termination.
Preheating
Time
5 seconds max.
30-90 seconds
[Allowable Flow Soldering Temperature and Time]
280
270
3. When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(ΔT) between the component and solvent within the range
shown in the table 2.
260
250
240
230
220
4. Do not apply flow soldering to chips not listed in table 2.
0
10
20
30
40
Soldering Time (sec.)
Table 2
Part Number
GRM18/21/31
LLL21/31
Temperature Differential
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
ΔTV150°C
GQM18/21
Recommended Conditions
Pb-Sn Solder
Lead Free Solder
100 to 120°C
250 to 260°C
N2
Preheating Peak Temperature
Soldering Peak Temperature
Atmosphere
90 to 110°C
240 to 250°C
Air
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
5. Optimum Solder Amount for Flow Soldering
5-1. The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessive, the risk of cracking is higher during board
bending or any other stressful condition.
Up to Chip Thickness
Adhesive
in section
Continued on the following page.
125
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
4-3. Correction with a Soldering Iron
1. When sudden heat is applied to the components when
using a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change can cause deformations inside the
components. In order to prevent mechanical damage to
the components, preheating is required for both the
components and the PCB board. Preheating conditions
(The "Temperature of the Soldering Iron Tip", "Preheating
Temperature," "Temperature Differential" between the
iron tip and the components and the PCB), should be
within the conditions of table 3. It is required to keep the
temperature differential between the soldering iron and
the component surfaces (ΔT) as small as possible.
2. After soldering, do not allow the component/PCB to cool
down rapidly.
Table 3
Temperature
of Soldering
Iron Tip
Temperature
Differential
(ΔT)
Preheating
Temperature
Part Number
Atmosphere
GRM03/15/18/21/31
GJM03/15
350°C max. 150°C min. ΔTV190°C
280°C max. 150°C min. ΔTV130°C
Air
Air
GQM18/21
GRM32/43/55
GQM22
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
3. The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, in turn causing a reduction in the
adhesive strength of the terminations.
4. Optimum solder amount when re-working with a soldering
iron
4-1. For sizes smaller than 0603, (GRM03/15/18,
GJM03/15, GQM18), the top of the solder fillet
should be lower than 2 3 of the thickness of the
/
Solder Amount
component or 0.5mm whichever is smaller. For 0805
and larger sizes, (GRM21/31/32/43/55, GQM21/22),
the top of the solder fillet should be lower than 2 3 of
/
in section
the thickness of the component. If the solder amount
is excessive, the risk of cracking is higher during
board bending or under any other stressful condition.
4-2. A soldering iron with a tip of ø3mm or smaller should
be used. It is also necessary to keep the soldering
iron from touching the components during the
re-work.
4-3. Solder wire with ø0.5mm or smaller is required for
soldering.
4-4. Leaded Component Insertion
1. If the PCB is flexed when leaded components (such as
transformers and ICs) are being mounted, chips may
crack and solder joints may break.
Before mounting leaded components, support the PCB
using backup pins or special jigs to prevent warping.
5. Washing
Excessive ultrasonic oscillation during cleaning can cause
the PCBs to resonate, resulting in cracked chips or broken
solder joints. Take note not to vibrate PCBs.
Continued on the following page.
126
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
6. Electrical Test on Printed Circuit Board
1. Confirm position of the support pin or specific jig, when
inspecting the electrical performance of a capacitor after
mounting on the printed circuit board.
[Not Recommended]
Peeling
1-1. Avoid bending the printed circuit board by the
pressure of a test pin, etc.
Test-pin
The thrusting force of the test probe can flex the PCB,
resulting in cracked chips or open solder joints.
Provide support pins on the back side of the PCB to
prevent warping or flexing.
[Recommended]
Support Pin
1-2. Avoid vibration of the board by shock when a test pin
contacts a printed circuit board.
Test-pin
7. Printed Circuit Board Cropping
1. After mounting a capacitor on a printed circuit board, do
not apply any stress to the capacitor that is caused by
bending or twisting the board.
[Bending]
[Twisting]
1-1. In cropping the board, the stress as shown at right
may cause the capacitor to crack.
Try not to apply this type of stress to a capacitor.
2. Ascertain of the cropping method for the printed circuit
board in advance.
2-1. Printed circuit board cropping shall be carried out by
using a jig or an apparatus to prevent the mechanical
stress that can occur to the board.
(1) Example of a suitable jig
Recommended example: the board should be
pushed as close to the cropping jig as possible
and from the back side of board in order to
minimize the compressive stress applied to the
capacitor.
[Outline of Jig]
Printed Circuit Board
V-groove
Not recommended example: when the board is
pushed at a point far from the cropping jig and
from the front side of board as below, the
capacitor may form a crack caused by the tensile
stress applied to capacitor.
Board Cropping Jig
Recommended
Not recommended
Direction of Load
Direction of Load
Load Point
Printed Circuit Board
Components
Components
Load Point
Printed Circuit Board
Continued on the following page.
127
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
(2) Example of a suitable machine
An outline of a printed circuit board cropping
machine is shown as follows. Along the lines with
the V-grooves on the printed circuit board, the top
and bottom blades are aligned to one another
when cropping the board.
[Outline of Machine]
Top Blade
The misalignment of the position between top and
bottom blades may cause the capacitor to crack.
Printed Circuit Board
Top Blade
[Principle of Operation]
[Cross-section Diagram]
Bottom Blade
V-groove
Printed Circuit Board
V-groove
Not Recommended
Recommended
Top-bottom Misalignment
Left-right Misalignment
Front-rear Misalignment
Top Blade
Top Blade
Top Blade
Top Blade
Bottom Blade
Bottom Blade
Bottom Blade
Bottom Blade
c Others
1. Under Operation of Equipment
If the equipment is not turned off or unplugged,
the hazards may be worsened by supplying
continuous power.
1-1. Do not touch a capacitor directly with bare hands
during operation in order to avoid the danger of an
electric shock.
(2) In this type of situation, do not allow face and
hands to come in contact with the capacitor or
burns may be caused by the capacitor's high
temperature.
1-2. Do not allow the terminals of a capacitor to come in
contact with any conductive objects (short-circuit).
Do not expose a capacitor to a conductive liquid,
including any acid or alkali solutions.
2-2. Disposal of Waste
1-3. Confirm the environment in which the equipment will
operate is under the specified conditions.
Do not use the equipment under the following
environments.
When capacitors are disposed, they must be burned
or buried by an industrial waste vendor with the
appropriate licenses.
2-3. Circuit Design
(1) Being spattered with water or oil.
(2) Being exposed to direct sunlight.
(3) Being exposed to Ozone, ultraviolet rays or
radiation.
GRM, GCM, GMA/D, LLL/A/M, GQM, GJM, GNM
Series capacitors in this catalog are not safety
certified products.
2-4. Remarks
(4) Being exposed to toxic gas (e.g., hydrogen sulfide,
sulfur dioxide, chlorine, ammonia gas, etc.)
(5) Any vibrations or mechanical shocks exceeding the
specified limits.
Failure to follow the cautions may result, worst case,
in a short circuit and smoking when the product is
used.
The above notices are for standard applications and
conditions. Contact us when the products are used in
special mounting conditions.
(6) Moisture condensing environments.
1-4. Use damp proof countermeasures if using under any
conditions that can cause condensation.
Select optimum conditions for operation as they
determine the reliability of the product after assembly.
The data herein are given in typical values, not
guaranteed ratings.
2. Others
2-1. In an Emergency
(1) If the equipment should generate smoke, fire or
smell, immediately turn off or unplug the equipment.
128
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
c Rating
1. Operating Temperature
operating environments may deteriorate due to
the corrosion of the terminations and the
1. The operating temperature limit depends on the capacitor.
1-1. Do not apply temperatures exceeding the upper
operating temperature.
penetration of moisture into the capacitor.
1-2. The same phenomenon as the above may occur
when the electrodes or terminals of the capacitor
are subject to moisture condensation.
It is necessary to select a capacitor with a suitable
rated temperature that will cover the operating
temperature range.
1-3. The deterioration of characteristics and insulation
resistance due to the oxidization or corrosion of
It is also necessary to consider the temperature
distribution in equipment and the seasonal
temperature variable factor.
terminal electrodes may result in breakdown when
the capacitor is exposed to corrosive or volatile
gases or solvents for long periods of time.
1-2. Consider the self-heating factor of the capacitor.
The surface temperature of the capacitor shall be
the upper operating temperature or less when
including the self-heating factors.
3. Piezo-electric Phenomenon
1. When using high dielectric constant type capacitors in
AC or pulse circuits, the capacitor itself vibrates at
specific frequencies and noise may be generated.
Moreover, when the mechanical vibration or shock is
added to the capacitor, noise may occur.
2. Atmosphere Surroundings (gaseous and liquid)
1. Restriction on the operating environment of capacitors.
1-1. Capacitors, when used in the above, unsuitable,
c Soldering and Mounting
1. PCB Design
1. Notice for Pattern Forms
1-2. There is a possibility of chip crack caused by PCB
expansion/contraction with heat. Because stress for
chip is different depend on PCB material and
structure. Especially metal PCB such as alumina has
a greater risk of chip crack because of large
difference of thermal expansion coefficient. In case of
chip below 0402 size, there is also the same
possibility of crack with a single-layered glass epoxy
board.
1-1. Unlike leaded components, chip components are
susceptible to flexing stresses since they are
mounted directly on the substrate.
They are also more sensitive to mechanical and
thermal stresses than leaded components.
Excess solder fillet height can multiply these stresses
and cause chip cracking. When designing substrates,
take land patterns and dimensions into consideration
to eliminate the possibility of excess solder fillet
height.
Pattern Forms
Prohibited
Correct
Chassis
Solder Resist
Solder (ground)
Placing Close to Chassis
Electrode Pattern
Lead Wire
Solder Resist
Placing
of Chip Components
and Leaded Components
Soldering Iron
Lead Wire
Placing
of Leaded Components
after Chip Component
Solder Resist
Solder Resist
Lateral Mounting
Continued on the following page.
129
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
Continued from the preceding page.
2. Land Dimensions
Land
2-1. A chip capacitor can be cracked due to the stress of
PCB bending, etc. if the land area is larger than
needed and has an excess amount of solder.
Please refer to the land dimensions in table 1 for flow
soldering, table 2 for reflow soldering, table 3 for
GNM & LLA, and table 4 for LLM.
Chip Capacitor
c
Solder Resist
b
a
Please confirm the suitable land dimension by
evaluating the actual SET ꢀ PCB.
Table 1 Flow Soldering Method
Dimensions
Chip (LgW)
a
b
c
Part Number
GRM18
1.6g0.8
GQM18
0.6 to 1.0
1.0 to 1.2
0.8 to 0.9
0.9 to 1.0
0.6 to 0.8
0.8 to 1.1
GRM21
2.0g1.25
GQM21
GRM31
LLL21
LLL31
3.2g1.6
1.25g2.0
1.6g3.2
2.2 to 2.6
0.4 to 0.7
0.6 to 1.0
1.0 to 1.1
0.5 to 0.7
0.8 to 0.9
1.0 to 1.4
1.4 to 1.8
2.6 to 2.8
(in mm)
Table 2 Reflow Soldering Method
Dimensions
Chip (LgW)
a
b
c
Part Number
GRM02
GJM02
0.4g0.2
0.6g0.3
0.16 to 0.2
0.2 to 0.3
0.12 to 0.18
0.2 to 0.35
0.2 to 0.23
0.2 to 0.4
GRM03
GJM03
1.0g0.5 (within 0.10)
1.0g0.5 ( 0.15ꢀ 0.20)
1.6g0.8 (within 0.10)
1.6g0.8 ( 0.15ꢀ 0.20)
2.0g1.25
0.3 to 0.5
0.4 to 0.6
0.6 to 0.8
0.7 to 0.9
1.0 to 1.2
1.2
0.35 to 0.45
0.40 to 0.50
0.6 to 0.7
0.7 to 0.8
0.6 to 0.7
0.6
0.4 to 0.6
0.5 to 0.7
0.6 to 0.8
0.8 to 1.0
0.8 to 1.1
1.25
GRM15
GJM15
GRM18
GQM18
GQM21
2.0g1.25 (within 1.0)
2.0g1.25 ( 0.15)
2.0g1.25 ( 0.20)
3.2g1.6 (within 0.20)
3.2g1.6 ( 0.30)
3.2g2.5
1.2
0.6 to 0.8
0.6 to 0.8
0.9 to 1.2
1.0 to 1.3
1.0 to 1.2
1.2 to 1.4
1.4 to 1.6
0.2 to 0.25
1.2 to 1.4
1.2 to 1.4
1.5 to 1.7
1.7 to 1.9
1.8 to 2.3
2.3 to 3.0
3.5 to 4.8
0.7 to 1.0
GRM21
1.0 to 1.4
1.8 to 2.0
1.9 to 2.1
2.0 to 2.4
3.0 to 3.5
4.0 to 4.6
0.15 to 0.2
GRM31
GRM32
GRM43
GRM55
LLL15
4.5g3.2
5.7g5.0
0.5g1.0
LLL18
LLR18
0.8g1.6
0.2 to 0.3
0.3 to 0.4
1.4 to 1.6
1.25g2.0
1.6g3.2
2.8g2.8
0.4 to 0.6
0.6 to 0.8
2.2 to 2.5
0.4 to 0.5
0.6 to 0.7
0.8 to 1.0
1.4 to 1.8
2.6 to 2.8
1.9 to 2.3
LLL21
LLL31
GQM22
(in mm)
Continued on the following page.
130
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
Continued from the preceding page.
GNMpp2
GNMpp4
LLA
Chip Capacitor
Chip Capacitor
a
b
a
b
c
Land
Land
p
c
p
Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions
Dimensions (mm)
Part Number
L
W
0.6
a
b
c
p
GNM0M2
GNM1M2
GNM212
GNM214
GNM314
LLA18
0.9
1.37
2.0
2.0
3.2
1.6
2.0
3.2
0.12 to 0.20*
0.4 to 0.5
0.6 to 0.7
0.6 to 0.7
0.8 to 1.0
0.3 to 0.4
0.5 to 0.7
0.7 to 0.9
0.35 to 0.40*
0.35 to 0.45
0.5 to 0.7
0.3
0.45
0.64
1.0
0.5
0.8
0.4
0.5
0.8
1.0
0.3 to 0.35
0.4 to 0.5
1.25
1.25
1.6
0.5 to 0.7
0.25 to 0.35
0.3 to 0.4
0.7 to 0.9
0.8
0.25 to 0.35
0.35 to 0.6
0.4 to 0.7
0.15 to 0.25
0.2 to 0.3
LLA21
1.25
1.6
LLA31
0.3 to 0.4
* 0.82Va+2bV1.00
p
c
LLM
b
a
e
Chip Capacitor
c'
b'
f
d
Table 4 LLM Series for Reflow Soldering Land Dimensions
Dimensions (mm)
d
Part Number
a
b, b'
c, c'
0.3
e
f
p
LLM21
LLM31
0.6 to 0.8
1.0
(0.3 to 0.5)
2.0 to 2.6
3.2 to 3.6
1.3 to 1.8
1.6 to 2.0
1.4 to 1.6
2.6
0.5
0.8
(0.3 to 0.5)
0.4
b=(c-e)/2, b'=(d-f)/2
2. Adhesive Application
1. Thin or insufficient adhesive can cause the chips to
loosen or become disconnected during flow soldering.
The amount of adhesive must be more than dimension c,
shown in the drawing at right, to obtain the correct
bonding strength.
a=20 to 70μm
b=30 to 35μm
c=50 to 105μm
Chip Capacitor
a
c
The chip's electrode thickness and land thickness must
also be taken into consideration.
b
Adhesive
Land
Board
2. Low viscosity adhesive can cause chips to slip after
mounting. The adhesive must have a viscosity of
5000Pa s s (500ps) min. (at 25°C).
3. Adhesive Coverage
Part Number
GRM18, GQM18
Adhesive Coverage*
0.05mg min.
GRM21, LLL21, GQM21
GRM31, LLL31
0.1mg min.
0.15mg min.
*Nominal Value
Continued on the following page.
131
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
Continued from the preceding page.
3. Adhesive Curing
1. Insufficient curing of the adhesive can cause chips to
disconnect during flow soldering and deterioration in the
insulation resistance between the outer electrodes due to
moisture absorption.
Control curing temperature and time in order to prevent
insufficient hardening.
4. Flux Application
1. An excessive amount of flux generates a large quantity of
3. Do not use strong acidic flux.
4. Do not use water-soluble *flux.
flux gas, which can cause a deterioration of solderability,
so apply flux thinly and evenly throughout. (A foaming
system is generally used for flow soldering.)
2. Flux containing too high a percentage of halide may
cause corrosion of the outer electrodes unless there is
sufficient cleaning. Use flux with a halide content of 0.2%
max.
(*Water-soluble flux can be defined as non-rosin type flux
including wash-type flux and non-wash-type flux.)
5. Flow Soldering
o Set temperature and time to ensure that leaching of the
[As a Single Chip]
outer electrode does not exceed 25% of the chip end
area as a single chip (full length of the edge A-B-C-D
shown at right) and 25% of the length A-B shown as
mounted on substrate.
A
B
D
Outer Electrode
C
[As Mounted on Substrate]
B
A
6. Washing
1. Please evaluate a capacitor using actual cleaning
3. Select the proper cleaning conditions.
3-1. Improper cleaning conditions (excessive or
insufficient) may result in the deterioration of the
performance of the capacitors.
equipment and conditions to confirm the quality and
select the applicable solvent.
2. Unsuitable cleaning solvent may leave residual flux or
other foreign substances, causing deterioration of
electrical characteristics and the reliability of the
capacitors.
Continued on the following page.
132
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
Continued from the preceding page.
7. Coating
1. A crack may be caused in the capacitor due to the stress
of the thermal contraction of the resin during curing
process.
Select a resin for which the thermal expansion coefficient
is as close to that of the capacitor as possible.
A silicone resin can be used as an under-coating to buffer
against the stress.
The stress is affected by the amount of resin and curing
contraction.
2. Select a resin that is less hygroscopic.
Select a resin with low curing contraction.
The difference in the thermal expansion coefficient
between a coating resin or a molding resin and the
capacitor may cause the destruction and deterioration of
the capacitor such as a crack or peeling, and lead to the
deterioration of insulation resistance or dielectric
breakdown.
Using hygroscopic resins under high humidity conditions
may cause the deterioration of the insulation resistance of
a capacitor.
An epoxy resin can be used as a less hygroscopic resin.
8. Die Bonding/Wire Bonding (GMA or GMD Series)
1. Die Bonding of Capacitors
2. Wire Bonding
s 5SE THE FOLLOWING MATERIALS FOR THE "RAZING ALLOYSꢀ
Au-Sn (80/20) 300 to 320 °C in N2 atmosphere
s -OUNTING
s 7IRE
'OLD WIREꢀ ꢃꢅ MICRO M ꢂꢆꢁꢆꢆꢇ INCHꢄ DIAMETER
s "ONDING
(1) Control the temperature of the substrate so it
MATCHES THE TEMPERATURE OF THE BRAZING ALLOYꢁ
ꢂꢃꢄ 0LACE THE BRAZING ALLOY ON THE SUBSTRATE AND PLACE
the capacitor on the alloy. Hold the capacitor and
gently apply the load. Be sure to complete the
operation within 1 minute.
(1) Thermo compression, ultrasonic ball bonding.
ꢂꢃꢄ 2EQUIRED STAGE TEMPERATUREꢀ ꢇꢅꢆ TO ꢃꢆꢆ #
ꢂꢈꢄ 2EQUIRED WEDGE OR CAPILLARY WEIGHTꢀ ꢆꢁꢃ. TO ꢆꢁꢅ.
(4) Bond the capacitor and base substrate or other
devices with gold wire.
c Others
1. Transportation
1-2. Do not apply excessive vibration, shock, and
pressure to the capacitor.
1. The performance of a capacitor may be affected by the
conditions during transportation.
1-1. The capacitors shall be protected against
excessive temperature, humidity and mechanical
force during transportation.
(1) When excessive mechanical shock or pressure
is applied to a capacitor, chipping or cracking
may occur in the ceramic body of the capacitor.
(2) When the sharp edge of an air driver, a
SOLDERING IRONꢎ TWEEZERSꢎ A CHASSISꢎ ETCꢁ
impacts strongly on the surface of the capacitor,
the capacitor may crack and short-circuit.
1-3. Do not use a capacitor to which excessive shock
was applied by dropping, etc.
(1) Climatic condition
s LOW AIR TEMPERATUREꢀ ꢉꢊꢆ #
s CHANGE OF TEMPERATURE AIRꢋAIRꢀ ꢉꢃꢅ #ꢋꢌꢃꢅ #
s LOW AIR PRESSUREꢀ ꢈꢆ K0A
s CHANGE OF AIR PRESSUREꢀ ꢍ K0AꢋMINꢁ
ꢂꢃꢄ -ECHANICAL CONDITION
A capacitor dropped accidentally during
processing may be damaged.
Transportation shall be done in such a way that
the boxes are not deformed and forces are not
directly passed on to the inner packaging.
133
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
MEMO
134
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Contents
(Medium Voltage)
For General Purpose
GRM (250Vdc min.)/GRJ/GR3 Series
Temperature Compensating Type
GRM Series (250Vdc min.)
Specifications and Test Methods
High Dielectric Constant Type
GRM Series (250Vdc min.)
Specifications and Test Methods
Soft Termination Type GRJ Series
Specifications and Test Methods
Large Capacitance and High Allowable
Ripple Current GR3 Series
p136
p141
p143
p145
p148
p150
p153
p155
Specifications and Test Methods
Only for Applications
For LCD Backlight Inverter Circuit
GRM/DC3.15kV Series
p158
p159
p161
p162
p165
p166
Specifications and Test Methods
For Information Devices GR4 Series
Specifications and Test Methods
For Camera Flash Circuit GR7 Series
Specifications and Test Methods
AC250V Type (Which Meet Japanese Law)
GA2 Series
p169
p170
Specifications and Test Methods
Safety Standard Certified GA3 Series
UL, IEC60384-14 Class X1/Y2 Type GC
IEC60384-14 Class Y2, X1/Y2 Type GF
IEC60384-14 Class Y3 Type GD
IEC60384-14 Class X2 Type GB
Specifications and Test Methods
p173
p174
p176
p177
p178
Reference Data (Typical Example)
Package
!Caution/Notice
p182
p185
p188
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
Temperature Compensating Type GRM Series (250Vdc min.)
e
g
e
Features
c
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
provides high flash-over voltage.
L
W
Dimensions (mm)
T
1.0 +0,-0.3
Part Number
L
W
e min. g min.
GRM21A
GRM21B
GRM31A
GRM31B
GRM31C
GRM32A
GRM32B
GRM32Q
GRM32D
GRM42A
GRM43Q
GRM43D
GRM55Q
GRM55D
ꢀ.0 0.ꢀ 1.ꢀ5 0.ꢀ
0.7
3. A new monolithic structure for small, surface-
mountable devices capable of operating at high
voltage levels
1.ꢀ5 0.ꢀ
1.0 +0,-0.3
3.ꢀ 0.ꢀ 1.6 0.ꢀ 1.ꢀ5 +0,-0.3
1.6 0.ꢀ
1.0 +0,-0.3
1.5*
0.3
1.ꢀ5 +0,-0.3
1.5 +0,-0.3
ꢀ.0 +0,-0.3
3.ꢀ 0.ꢀ ꢀ.5 0.ꢀ
4. Sn-plated external electrodes provides good
solderability.
4.5 0.3 ꢀ.0 0.ꢀ 1.0 +0,-0.3
1.5 +0,-0.3
4.5 0.4 3.ꢀ 0.3
ꢀ.0 +0,-0.3
1.5 +0,-0.3
5.7 0.4 5.0 0.4
ꢀ.0 +0,-0.3
ꢀ.9
ꢀ.ꢀ
3.ꢀ
5. Use the GRM21/31 type with flow or reflow soldering,
and other types with reflow soldering only.
* GRM31A7U3D, GRM3ꢀA7U3D, GRM3ꢀB7U3D: 1.8mm min.
Applications
c
Ideal for use on high frequency pulse circuits such
as snubber circuits for switching power supplies,
DC-DC converters, ballasts (inverter fluorescent
lamps), etc.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
C0G Characteristics
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
max.
(mm)
Electrode e
GRM21A5C2E100JW01D
GRM21A5C2E120JW01D
GRM21A5C2E150JW01D
GRM21A5C2E180JW01D
GRM21A5C2E220JW01D
GRM21A5C2E270JW01D
GRM21A5C2E330JW01D
GRM21A5C2E390JW01D
GRM21A5C2E470JW01D
GRM21A5C2E560JW01D
GRM21A5C2E680JW01D
GRM21A5C2E820JW01D
GRM21A5C2E101JW01D
GRM21A5C2E121JW01D
GRM21A5C2E151JW01D
GRM21A5C2E181JW01D
GRM21A5C2E221JW01D
GRM21A5C2E271JW01D
GRM21A5C2E331JW01D
GRM31A5C2J100JW01D
GRM31A5C2J120JW01D
GRM31A5C2J150JW01D
GRM31A5C2J180JW01D
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
630Vdc
630Vdc
630Vdc
630Vdc
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
10pF 5ꢀ
12pF 5ꢀ
15pF 5ꢀ
18pF 5ꢀ
22pF 5ꢀ
27pF 5ꢀ
33pF 5ꢀ
39pF 5ꢀ
47pF 5ꢀ
56pF 5ꢀ
68pF 5ꢀ
82pF 5ꢀ
100pF 5ꢀ
120pF 5ꢀ
150pF 5ꢀ
180pF 5ꢀ
220pF 5ꢀ
270pF 5ꢀ
330pF 5ꢀ
10pF 5ꢀ
12pF 5ꢀ
15pF 5ꢀ
18pF 5ꢀ
2
2
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
1.5mm
1.5mm
1.5mm
1.5mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3.2
3.2
3.2
3.2
1.6
1.6
1.6
Continued on the following page.
136
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GRM31A5C2J220JW01D
GRM31A5C2J270JW01D
GRM31A5C2J330JW01D
GRM31A5C2J390JW01D
GRM31A5C2J470JW01D
GRM31A5C2J560JW01D
GRM31A5C2J680JW01D
GRM31A5C2J820JW01D
GRM31A5C2J101JW01D
GRM31A5C2J121JW01D
GRM31A5C2J151JW01D
GRM31A5C2J181JW01D
GRM31A5C2J221JW01D
GRM31A5C2J271JW01D
GRM31A5C2J331JW01D
GRM31A5C2J391JW01D
GRM31A5C2J471JW01D
GRM31A5C2J561JW01D
GRM31B5C2J681JW01L
GRM31B5C2J821JW01L
GRM31B5C2J102JW01L
GRM31A5C3A100JW01D
GRM31A5C3A120JW01D
GRM31A5C3A150JW01D
GRM31A5C3A180JW01D
GRM31A5C3A220JW01D
GRM31A5C3A270JW01D
GRM31A5C3A330JW01D
GRM31A5C3A390JW01D
GRM31A5C3A470JW01D
GRM31A5C3A560JW01D
GRM31A5C3A680JW01D
GRM31A5C3A820JW01D
GRM31A5C3A101JW01D
GRM31A5C3A121JW01D
GRM31A5C3A151JW01D
GRM31A5C3A181JW01D
GRM31A5C3A221JW01D
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
22pF±±5
27pF±±5
33pF±±5
39pF±±5
47pF±±5
±6pF±±5
68pF±±5
82pF±±5
100pF±±5
120pF±±5
1±0pF±±5
180pF±±5
220pF±±5
270pF±±5
330pF±±5
390pF±±5
470pF±±5
±60pF±±5
680pF±±5
820pF±±5
1000pF±±5
10pF±±5
12pF±±5
1±pF±±5
18pF±±5
22pF±±5
27pF±±5
33pF±±5
39pF±±5
47pF±±5
±6pF±±5
68pF±±5
82pF±±5
100pF±±5
120pF±±5
1±0pF±±5
180pF±±5
220pF±±5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1
1
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.2±
1.2±
1.2±
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
U2J Characteristics
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GRM21A7U2E101JW31D
GRM21A7U2E121JW31D
GRM21A7U2E151JW31D
GRM21A7U2E181JW31D
GRM21A7U2E221JW31D
GRM21A7U2E271JW31D
GRM21A7U2E331JW31D
GRM21A7U2E391JW31D
GRM21A7U2E471JW31D
GRM21A7U2E561JW31D
GRM21A7U2E681JW31D
GRM21A7U2E821JW31D
GRM21A7U2E102JW31D
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
2±0Vdc
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
100pF±±5
120pF±±5
1±0pF±±5
180pF±±5
220pF±±5
270pF±±5
330pF±±5
390pF±±5
470pF±±5
±60pF±±5
680pF±±5
820pF±±5
1000pF±±5
2
2
2
2
2
2
2
2
2
2
2
2
2
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1.2±
1
1
1
1
1
1
1
1
1
1
1
1
1
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
Continued on the following page.
137
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GRM21A7U2E122JW31D
GRM21A7U2E152JW31D
GRM21A7U2E182JW31D
GRM21A7U2E222JW31D
GRM21B7U2E272JW32L
GRM31A7U2E272JW31D
GRM21B7U2E332JW32L
GRM31A7U2E332JW31D
GRM21B7U2E392JW32L
GRM31A7U2E392JW31D
GRM21B7U2E472JW32L
GRM31A7U2E472JW31D
GRM21B7U2E562JW32L
GRM31A7U2E562JW31D
GRM31B7U2E682JW31L
GRM31B7U2E822JW31L
GRM31B7U2E103JW31L
GRM31A7U2J100JW31D
GRM31A7U2J120JW31D
GRM31A7U2J150JW31D
GRM31A7U2J180JW31D
GRM31A7U2J220JW31D
GRM31A7U2J270JW31D
GRM31A7U2J330JW31D
GRM31A7U2J390JW31D
GRM31A7U2J470JW31D
GRM31A7U2J560JW31D
GRM31A7U2J680JW31D
GRM31A7U2J820JW31D
GRM31A7U2J101JW31D
GRM31A7U2J121JW31D
GRM31A7U2J151JW31D
GRM31A7U2J181JW31D
GRM31A7U2J221JW31D
GRM31A7U2J271JW31D
GRM31A7U2J331JW31D
GRM31A7U2J391JW31D
GRM31A7U2J471JW31D
GRM31A7U2J561JW31D
GRM31A7U2J681JW31D
GRM31A7U2J821JW31D
GRM31A7U2J102JW31D
GRM31A7U2J122JW31D
GRM32A7U2J122JW31D
GRM31A7U2J152JW31D
GRM32A7U2J152JW31D
GRM31A7U2J182JW31D
GRM32A7U2J182JW31D
GRM31A7U2J222JW31D
GRM32A7U2J222JW31D
GRM31B7U2J272JW31L
GRM31B7U2J332JW31L
GRM31C7U2J392JW32L
GRM31C7U2J472JW32L
GRM32B7U2J562JW31L
GRM32Q7U2J682JW31L
GRM32D7U2J822JW31L
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
1200pF 5ꢀ
1500pF 5ꢀ
1800pF 5ꢀ
2200pF 5ꢀ
2700pF 5ꢀ
2700pF 5ꢀ
3300pF 5ꢀ
3300pF 5ꢀ
3900pF 5ꢀ
3900pF 5ꢀ
4700pF 5ꢀ
4700pF 5ꢀ
5600pF 5ꢀ
5600pF 5ꢀ
6800pF 5ꢀ
8200pF 5ꢀ
10000pF 5ꢀ
10pF 5ꢀ
2
1.25
1.25
1.25
1.25
1.25
1.6
1.25
1.6
1.25
1.6
1.25
1.6
1.25
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.5
1.6
2.5
1.6
2.5
1.6
2.5
1.6
1.6
1.6
1.6
2.5
2.5
2.5
1
1
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
1.5mm
0.7mm
1.5mm
0.7mm
1.5mm
0.7mm
1.5mm
0.7mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
2
1
2
1
2
1.45
1
3.2
2
1.45
1
3.2
2
1.45
1
3.2
2
1.45
1
3.2
2
1.45
1
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
1.25
1.25
1.25
1
12pF 5ꢀ
1
15pF 5ꢀ
1
18pF 5ꢀ
1
22pF 5ꢀ
1
27pF 5ꢀ
1
33pF 5ꢀ
1
39pF 5ꢀ
1
47pF 5ꢀ
1
56pF 5ꢀ
1
68pF 5ꢀ
1
82pF 5ꢀ
1
100pF 5ꢀ
120pF 5ꢀ
150pF 5ꢀ
180pF 5ꢀ
220pF 5ꢀ
270pF 5ꢀ
330pF 5ꢀ
390pF 5ꢀ
470pF 5ꢀ
560pF 5ꢀ
680pF 5ꢀ
820pF 5ꢀ
1000pF 5ꢀ
1200pF 5ꢀ
1200pF 5ꢀ
1500pF 5ꢀ
1500pF 5ꢀ
1800pF 5ꢀ
1800pF 5ꢀ
2200pF 5ꢀ
2200pF 5ꢀ
2700pF 5ꢀ
3300pF 5ꢀ
3900pF 5ꢀ
4700pF 5ꢀ
5600pF 5ꢀ
6800pF 5ꢀ
8200pF 5ꢀ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.25
1.25
1.8
1.8
1.25
1.5
2
Continued on the following page.
138
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GRM32D7U2J103JW31L
GRM43Q7U2J123JW31L
GRM43D7U2J153JW31L
GRM43D7U2J183JW31L
GRM43D7U2J223JW31L
GRM55Q7U2J273JW31L
GRM55D7U2J333JW31L
GRM55D7U2J393JW31L
GRM55D7U2J473JW31L
GRM31A7U3A100JW31D
GRM31A7U3A120JW31D
GRM31A7U3A150JW31D
GRM31A7U3A180JW31D
GRM31A7U3A220JW31D
GRM31A7U3A270JW31D
GRM31A7U3A330JW31D
GRM31A7U3A390JW31D
GRM31A7U3A470JW31D
GRM31A7U3A560JW31D
GRM31A7U3A680JW31D
GRM31A7U3A820JW31D
GRM31A7U3A101JW31D
GRM31A7U3A121JW31D
GRM31A7U3A151JW31D
GRM31A7U3A181JW31D
GRM31A7U3A221JW31D
GRM31A7U3A271JW31D
GRM31A7U3A331JW31D
GRM31B7U3A391JW31L
GRM31B7U3A471JW31L
GRM31B7U3A561JW31L
GRM31B7U3A681JW31L
GRM31C7U3A821JW32L
GRM31C7U3A102JW32L
GRM32B7U3A122JW31L
GRM32Q7U3A152JW31L
GRM32D7U3A182JW31L
GRM32D7U3A222JW31L
GRM43Q7U3A272JW31L
GRM43Q7U3A332JW31L
GRM43D7U3A392JW31L
GRM43D7U3A472JW31L
GRM55Q7U3A562JW31L
GRM55Q7U3A682JW31L
GRM55D7U3A822JW31L
GRM55D7U3A103JW31L
GRM31A7U3D100JW31D
GRM31A7U3D120JW31D
GRM31A7U3D150JW31D
GRM31A7U3D180JW31D
GRM31A7U3D220JW31D
GRM31A7U3D270JW31D
GRM31A7U3D330JW31D
GRM31A7U3D390JW31D
GRM31A7U3D470JW31D
GRM31A7U3D560JW31D
GRM31A7U3D680JW31D
630Vdc
630Vdc
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
10000pF±±5
12000pF±±5
1±000pF±±5
18000pF±±5
22000pF±±5
27000pF±±5
33000pF±±5
39000pF±±5
47000pF±±5
10pF±±5
3.2
4.±
4.±
4.±
4.±
±.7
±.7
±.7
±.7
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.±
4.±
4.±
4.±
±.7
±.7
±.7
±.7
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
2.±
3.2
3.2
3.2
3.2
±.0
±.0
±.0
±.0
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.±
2.±
2.±
2.±
3.2
3.2
3.2
3.2
±.0
±.0
±.0
±.0
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2
1.±
2
1.±mm
2.2mm
2.2mm
2.2mm
2.2mm
3.2mm
3.2mm
3.2mm
3.2mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
1.±mm
2.2mm
2.2mm
2.2mm
2.2mm
3.2mm
3.2mm
3.2mm
3.2mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
630Vdc
630Vdc
2
630Vdc
2
630Vdc
1.±
2
630Vdc
630Vdc
2
630Vdc
2
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
1
12pF±±5
1
1±pF±±5
1
18pF±±5
1
22pF±±5
1
27pF±±5
1
33pF±±5
1
39pF±±5
1
47pF±±5
1
±6pF±±5
1
68pF±±5
1
82pF±±5
1
100pF±±5
120pF±±5
1±0pF±±5
180pF±±5
220pF±±5
270pF±±5
330pF±±5
390pF±±5
470pF±±5
±60pF±±5
680pF±±5
820pF±±5
1000pF±±5
1200pF±±5
1±00pF±±5
1800pF±±5
2200pF±±5
2700pF±±5
3300pF±±5
3900pF±±5
4700pF±±5
±600pF±±5
6800pF±±5
8200pF±±5
10000pF±±5
10pF±±5
1
1
1
1
1
1
1
1.2±
1.2±
1.2±
1.2±
1.8
1.8
1.2±
1.±
2
2
1.±
1.±
2
2
1.±
1.±
2
2
1
12pF±±5
1
1±pF±±5
1
18pF±±5
1
22pF±±5
1
27pF±±5
1
33pF±±5
1
39pF±±5
1
47pF±±5
1
±6pF±±5
1
68pF±±5
1
Continued on the following page.
139
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GRM32A7U3D820JW31D
GRM32A7U3D101JW31D
GRM32A7U3D121JW31D
GRM32A7U3D151JW31D
GRM32B7U3D181JW31L
GRM32B7U3D221JW31L
GRM42A7U3F270JW31L
GRM42A7U3F330JW31L
GRM42A7U3F390JW31L
GRM42A7U3F470JW31L
GRM42A7U3F560JW31L
GRM42A7U3F680JW31L
GRM42A7U3F820JW31L
GRM42A7U3F101JW31L
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
31±0Vdc
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
U2J (EIA)
82pF±±5
100pF±±5
120pF±±5
1±0pF±±5
180pF±±5
220pF±±5
27pF±±5
33pF±±5
39pF±±5
47pF±±5
±6pF±±5
68pF±±5
82pF±±5
100pF±±5
3.2
3.2
3.2
3.2
3.2
3.2
4.±
4.±
4.±
4.±
4.±
4.±
4.±
4.±
2.±
2.±
2.±
2.±
2.±
2.±
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1
1
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
1.8mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
1
1
1.2±
1.2±
1
1
1
1
1
1
1
1
140
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to ꢁ125ꢀC
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimension
Using calipers and micrometers
No failure should be observed when voltage in the Table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
Rated Voltage
DC250V
DC630V
Test Voltage
200% of the rated voltage
150% of the rated voltage
4
Dielectric Strength No defects or abnormalities
DC1kV, DC2kV,
DC3.15kV
130% of the rated voltage
The insulation resistance should be measured with DC500 50V
(DC250 25V in case of rated voltage: DC250V) and within 60 5
sec. of charging.
Insulation Resistance
More than 10,000MΩ
(I.R.)
5
6
Capacitance
Q
Within the specified tolerance
1,000 min.
The capacitance/Q should be measured at the frequency and
voltage shown as follows.
Capacitance
CF1,000pF
CU1,000pF
Frequency
1 0.2MHz AC0.5 to 5V(r.m.s.)
1 0.2kHz AC1 0.2V(r.m.s.)
Voltage
7
The capacitance measurement should be made at each step
specified in the Table.
Temp. Coefficient
C0G char. :
Step
Temperature (°C)
Capacitance
Temperature
Characteristics
0 30ppm/ꢀC (Temp. Range : ꢁ25 to ꢁ125ꢀC)
0ꢁ30, –72ppm/ꢀC (Temp. Range : –55 to ꢁ25ꢀC)
U2J char. :
–750 120ppm/ꢀC (Temp. Range : ꢁ25 to ꢁ125ꢀC)
–750ꢁ120, –347ppm/ꢀC (Temp. Range : –55 to ꢁ25ꢀC)
1
2
3
4
5
25 2
Min. Operating Temp. 3
25 2
Max. Operating Temp. 2
25 2
8
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Adhesive Strength
of Termination
9
No removal of the terminations or other defect should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
Appearance
Capacitance
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
Q
10
1,000 min.
Solder resist
Cu
Glass Epoxy Board
Continued on the following page.
141
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
a
t : 1.6
100
50
Pressurizing
speed: 1.0mm/s
20
11 Deflection
Fig. 2
Pressurize
R230
ꢃiÃÊ®
LZW
(mm)
a
b
c
d
Flexure=1
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z2.0
4.5Z3.2
5.7Z5.0
1.2
2.2
2.2
3.5
3.5
4.5
4.0
5.0
5.0
7.0
7.0
8.0
1.65
2.0
2.ꢀ
2.4
3.7
5.6
Capacitance meter
(in mm)
45
45
1.0
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5ꢀ02) (25% rosin in weight proportion). Immerse in
solder solution for 2 0.5 sec.
Solderability of
Termination
75% of the terminations are to be soldered evenly
and continuously.
12
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢁ60A or ꢁ63A ꢂutectic Solder
*
Appearance
No marking defects
Within 2.5%
Preheat the capacitor at 120 to 150°C for 1 min.
Immerse the capacitor in solder solution at 260 5°C for 10 1 sec.
Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`: 25 2.5mm/s
Capacitance
Change
,iÃÃÌ>ViÊ
13 to Soldering
Heat
Q
1,000 min.
*Preheating for more than 3.2Z2.5mm
I.R.
More than 10,000MΩ
Step
1
2
Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Within 2.5%
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Capacitance
Change
Q
500 min.
Let sit for 24 2 hrs. at room condition,* then measure.
I.R.
Step
Temperature (°C)
Min. Operating Temp. 3
Room Temp.
Max. Operating Temp. 2
Room Temp.
Time (min.)
30 3
2 to 3
30 3
2 to 3
More than 10,000MΩ
1
2
3
4
Temperature
Cycle
14
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass ꢂpoxy Board
Fig. 4
Appearance
No marking defects
Within 5.0%
Capacitance
Change
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
for 500Y 0hrs.
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
Humidity
15 (Steady
State)
W24
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
No marking defects
Within 3.0%
W48
Apply voltage as in Table for 1,000Y 0hrs. at maximum
operating temperature 3°C.
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
Appearance
Capacitance
Change
Q
350 min.
16 Life
Rated Voltage
DC250V
Applied Voltage
150% of the rated voltage
I.R.
More than 1,000MΩ
DC630V, DC1kV,
DC2kV, DC3.15kV
120% of the rated voltage
Dielectric
Strength
In accordance with item No.4
The charge/discharge current is less than 50mA.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
142
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
High Dielectric Constant Type GRM Series (250Vdc min.)
e
g
e
Features
c
1. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
L
W
Dimensions (mm)
T
Part Number
L
W
e
g min.
0.4
2. Sn-plated external electrodes provide good
solderability.
GRM188
GRM21A
GRM21B
GRM31B
GRM31C
GRM32Q
GRM32D
GRM43Q
GRM43D
GRM55D
1.6 0.1 0.8 0.1
0.8 0.1
1.0 +0,-0.3
1.25 0.2
1.25 +0,-0.3
1.6 0.2
1.5 +0,-0.3 0.3 min.
2.0 +0,-0.3
1.5 +0,-0.3
2.0 +0,-0.3
0.2 to 0.5
2.0 0.2 1.25 0.2
0.7
3. Use the GRM18/21/31 types with flow or reflow
soldering, and other types with reflow soldering
only.
3.2 0.2 1.6 0.2
3.2 0.3 2.5 0.2
4.5 0.4 3.2 0.3
1.2
2.2
3.2
5.7 0.4 5.0 0.4 2.0 +0,-0.3
Applications
c
1. Ideal for use on clamp-snubber circuits for
switching power supplies.
2. Ideal for use as primary-secondary coupling for
DC-DC converters.
3. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L Width W
Electrode g
min.
Part Number
Rated Voltage
Capacitance
max.
(mm)
Electrode e
(mm)
(mm)
GRM188R72E221KW07D
GRM188R72E331KW07D
GRM188R72E471KW07D
GRM188R72E681KW07D
GRM188R72E102KW07D
GRM21AR72E102KW01D
GRM188R72E152KW07D
GRM21AR72E152KW01D
GRM188R72E222KW07D
GRM21AR72E222KW01D
GRM21AR72E332KW01D
GRM21AR72E472KW01D
GRM21AR72E682KW01D
GRM21BR72E103KW03L
GRM31BR72E153KW01L
GRM31BR72E223KW01L
GRM31CR72E333KW03L
GRM31CR72E473KW03L
GRM31BR72E683KW01L
GRM32QR72E683KW01L
GRM31CR72E104KW03L
GRM32DR72E104KW01L
GRM32QR72E154KW01L
GRM43QR72E154KW01L
GRM32DR72E224KW01L
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
220pF 10ꢀ
330pF 10ꢀ
1.6
1.6
1.6
1.6
1.6
2
0.8
0.8
0.9
0.9
0.9
0.9
0.9
1
0.4mm
0.4mm
0.4mm
0.4mm
0.4mm
0.7mm
0.4mm
0.7mm
0.4mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
2.2mm
1.2mm
0.2 to 0.5mm
0.2 to 0.5mm
0.2 to 0.5mm
0.2 to 0.5mm
0.2 to 0.5mm
0.3mm min.
0.2 to 0.5mm
0.3mm min.
0.2 to 0.5mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
470pF 10ꢀ
0.8
680pF 10ꢀ
0.8
1000pF 10ꢀ
1000pF 10ꢀ
1500pF 10ꢀ
1500pF 10ꢀ
2200pF 10ꢀ
2200pF 10ꢀ
3300pF 10ꢀ
4700pF 10ꢀ
6800pF 10ꢀ
10000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
68000pF 10ꢀ
68000pF 10ꢀ
0.10µF 10ꢀ
0.10µF 10ꢀ
0.15µF 10ꢀ
0.15µF 10ꢀ
0.22µF 10ꢀ
0.8
1.25
0.8
1.6
2
0.9
1
1.25
0.8
1.6
2
0.9
1
1.25
1.25
1.25
1.25
1.25
1.6
2
1
2
1
2
1
2
1.45
1.25
1.25
1.8
1.8
1.25
1.5
1.8
2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
3.2
1.6
1.6
1.6
1.6
2.5
1.6
2.5
2.5
1.5
1.5
2
3.2
2.5
Continued on the following page.
143
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.±,20±2
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L Width W
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
(mm)
(mm)
GRM43DR72E224KW01L
GRM43DR72E334KW01L
GRM55DR72E334KW01L
GRM43DR72E474KW01L
GRM55DR72E474KW01L
GRM55DR72E684KW01L
GRM55DR72E105KW01L
GRM31BR72J102KW01L
GRM31BR72J152KW01L
GRM31BR72J222KW01L
GRM31BR72J332KW01L
GRM31BR72J472KW01L
GRM31BR72J682KW01L
GRM31BR72J103KW01L
GRM31CR72J153KW03L
GRM32QR72J223KW01L
GRM32DR72J333KW01L
GRM32DR72J473KW01L
GRM43QR72J683KW01L
GRM43DR72J104KW01L
GRM55DR72J154KW01L
GRM55DR72J224KW01L
GRM31BR73A471KW01L
GRM31BR73A681KW01L
GRM31BR73A102KW01L
GRM31BR73A152KW01L
GRM31BR73A222KW01L
GRM31BR73A332KW01L
GRM31BR73A472KW01L
GRM32QR73A682KW01L
GRM32QR73A103KW01L
GRM32DR73A153KW01L
GRM32DR73A223KW01L
GRM43DR73A333KW01L
GRM43DR73A473KW01L
GRM55DR73A683KW01L
GRM55DR73A104KW01L
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
±000Vdc
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
0.22µF±±0ꢀ
0.33µF±±0ꢀ
0.33µF±±0ꢀ
0.47µF±±0ꢀ
0.47µF±±0ꢀ
0.68µF±±0ꢀ
±.0µF±±0ꢀ
4.5
4.5
5.7
4.5
5.7
5.7
5.7
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
4.5
5.7
5.7
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
4.5
5.7
5.7
3.2
3.2
5.0
3.2
5.0
5.0
5.0
±.6
±.6
±.6
±.6
±.6
±.6
±.6
±.6
2.5
2.5
2.5
3.2
3.2
5.0
5.0
±.6
±.6
±.6
±.6
±.6
±.6
±.6
2.5
2.5
2.5
2.5
3.2
3.2
5.0
5.0
2
2
2.2mm
2.2mm
3.2mm
2.2mm
3.2mm
3.2mm
3.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
2.2mm
2.2mm
3.2mm
3.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
±.2mm
2.2mm
2.2mm
3.2mm
3.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
2
2
2
2
±000pF±±0ꢀ
±500pF±±0ꢀ
2200pF±±0ꢀ
3300pF±±0ꢀ
4700pF±±0ꢀ
6800pF±±0ꢀ
±0000pF±±0ꢀ
±5000pF±±0ꢀ
22000pF±±0ꢀ
33000pF±±0ꢀ
47000pF±±0ꢀ
68000pF±±0ꢀ
0.±0µF±±0ꢀ
0.±5µF±±0ꢀ
0.22µF±±0ꢀ
470pF±±0ꢀ
±.25
±.25
±.25
±.25
±.25
±.25
±.25
±.8
±.5
2
2
±.5
2
2
2
±.25
±.25
±.25
±.25
±.25
±.25
±.25
±.5
±.5
2
680pF±±0ꢀ
±000pF±±0ꢀ
±500pF±±0ꢀ
2200pF±±0ꢀ
3300pF±±0ꢀ
4700pF±±0ꢀ
6800pF±±0ꢀ
±0000pF±±0ꢀ
±5000pF±±0ꢀ
22000pF±±0ꢀ
33000pF±±0ꢀ
47000pF±±0ꢀ
68000pF±±0ꢀ
0.±0µF±±0ꢀ
2
2
2
2
2
±44
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125°C
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when 150% of the rated voltage
(200% of the rated voltage in case of rated voltage: DC250V,
120% of the rated voltage in case of rated voltage: DC1kV) is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4
Dielectric Strength No defects or abnormalities
The insulation resistance should be measured with DC500 50V
(DC250 25V in case of rated voltage: DC250V) and within 60 5
sec. of charging.
Insulation Resistance
(I.R.)
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
5
6
7
Capacitance
Within the specified tolerance
0.025 max.
The capacitance/D.F. should be measured at a frequency of
1 0.2kHz and a voltage of AC1 0.2V(r.m.s.).
Dissipation
Factor (D.F.)
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
2
3
4
5
25 2
Min. Operating Temp. 3
25 2
Max. Operating Temp. 2
25 2
Capacitance
Temperature
Characteristics
Cap. Change
Within 15%
(Temp. Range: –55 to +125°C)
8
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Adhesive Strength
of Termination
9
No removal of the terminations or other defect should occur.
10N (5N : Size 1.6g0.8mm only), 10 1s
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
10
D.F.
0.025 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
145
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
a
50
Pressurizing
20
t : 1.6
speed: 1.0mm/s
100
Pressurize
11 ꢃiviVÌ
R230
Fig. 2
ꢃiÃÊ®
LZW
®
Flexure=1
>
L
V
`
1.6Z0.8
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
1.0
1.2
2.2
2.2
3.5
4.5
3.0
4.0
5.0
5.0
7.0
8.0
1.2
1.65
2.0
2.ꢀ
3.7
5.6
Capacitance meter
45
45
(in mm)
1.0
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5ꢀ02) (25% rosin in weight proportion).
Immerse in solder solution for 2 0.5 sec.
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
12
75% of the terminations are to be soldered evenly and continuously.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢁ60A or ꢁ63A ꢂutectic Solder
*
ꢅ««i>À>Vi No marking defects
Preheat the capacitor at 120 to 150°C for 1 min.
Immerse the capacitor in solder solution at 260 5°C for 10 1
sec. Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`\Ê25 2.5mm/s
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
Within 10%
0.025 max.
D.F.
I.R.
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
,iÃÃÌ>ViÊ
13 ÌÊ-`iÀ}Ê
+ 0
–10
°C for 60 5 min. and then
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
let sit for 24 2 hrs. at room condition.*
ꢄi>Ì
*Preheating for more than 3.2Z2.5mm
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
-Ìi«
1
2
/i«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/i
1 min.
1 min.
In accordance with item No.4
ꢅ««i>À>Vi No marking defects
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
ꢆ>«>VÌ>ViÊ
Within 7.5%
ꢆꢂ>}i
D.F.
I.R.
0.025 max.
Let sit for 24 2 hrs. at room condition,* then measure.
-Ìi«
/i«iÀ>ÌÕÀiÊcꢆ®
Min. Operating Temp. 3
Room Temp.
/iÊ°®
30 3
2 to 3
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
1
2
3
4
Max. Operating Temp. 2
Room Temp.
30 3
2 to 3
/i«iÀ>ÌÕÀiÊ
ꢆÞVi
14
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+ 0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
Solder resist
Cu
Glass ꢂpoxy Board
Fig. 4
ꢅ««i>À>Vi No marking defects
ꢆ>«>VÌ>ViÊ
Within 15%
ꢆꢂ>}i
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
+24
for 500
hrs.
– 0
ꢄÕ`ÌÞÊ
15 -Ìi>`ÞÊ
-Ì>Ìi®
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
D.F.
I.R.
0.05 max.
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+ 0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
146
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM Series Specifications and Test Methods
Continued from the preceding page.
No.
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
ꢅ««i>À>Vi No marking defects
ꢆ>«>VÌ>ViÊ Within 15% (rated voltage: DC250V, DC630V)
Apply 120% of the rated voltage (150% of the rated voltage in
case of rated voltage: DC250V, 110% of the rated voltage in case
+48
ꢆꢂ>}i
Within 20% (rated voltage: DC1kV)
of rated voltage: DC1kV) for 1,000
hrs. at maximum
– 0
operating temperature 3°C. Remove and let sit for 24 2hrs. at
room condition,* then measure.
D.F.
0.05 max.
16 ꢇvi
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
I.R.
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
ꢅ««i>À>Vi No marking defects
ꢆ>«>VÌ>ViÊ
Within 15%
ꢆꢂ>}i
Apply the rated voltage at 40 2°C and relative humidity of ꢀ0 to
+24
ꢄÕ`ÌÞÊ
ꢀ5% for 500
– 0
hrs.
ꢇ>`}Ê
ꢅ««V>Ì\Ê
ꢃꢆÓxä6]Ê
ꢃꢆÈÎä6Ê
Ìi®
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
D.F.
I.R.
0.05 max.
17
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
147
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
Deflecting
Soft Termination Type GRJ Series
crack
e
g
L
e
Features
c
1. Improves endurance against Board Bending Stress.
2. Reduces the board bending stress by the conductive
polymer termination.
W
Dimensions (mm)
T
1.± +±,-±.3
Part Number
L
W
e
g min.
3. Use the GRJ21/31 types with flow or reflow
soldering, and other types with reflow soldering
only.
GRJ21A
GRJ21B
GRJ31B
GRJ31C
GRJ32Q
GRJ32D
GRJ43Q
GRJ43D
GRJ55D
2.± ±±.2 1.25 ±±.2
3.2 ±±.2 1.6 ±±.2
3.2 ±±.3 2.5 ±±.2
4.5 ±±.4 3.2 ±±.3
±.7
1.25 ±±.2
1.25 +±,-±.3
1.6 ±±.2
1.5 +±,-±.3 ±.3 min.
2.± +±,-±.3
1.5 +±,-±.3
1.2
Applications
c
2.2
3.2
2.± +±,-±.3
5.7 ±±.4 5.± ±±.4 2.± +±,-±.3
1. Ideal for use on clamp-snubber circuits for
switching power supplies.
2. Ideal for use as primary-secondary coupling for
DC-DC converters.
3. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
Part Number
Rated Voltage
Capacitance
max.
(mm)
Electrode e
min.
GRJ21AR72E102KWJ1D
GRJ21AR72E152KWJ1D
GRJ21AR72E222KWJ1D
GRJ21AR72E332KWJ1D
GRJ21AR72E472KWJ1D
GRJ21AR72E682KWJ1D
GRJ21BR72E103KWJ3L
GRJ21BR72E153KWJ3L
GRJ31BR72E153KWJ1L
GRJ21BR72E223KWJ3L
GRJ31BR72E223KWJ1L
GRJ31CR72E333KWJ3L
GRJ31CR72E473KWJ3L
GRJ31BR72E683KWJ1L
GRJ32QR72E683KWJ1L
GRJ31CR72E104KWJ3L
GRJ32DR72E104KWJ1L
GRJ32QR72E154KWJ1L
GRJ43QR72E154KWJ1L
GRJ32DR72E224KWJ1L
GRJ43DR72E224KWJ1L
GRJ43DR72E334KWJ1L
GRJ55DR72E334KWJ1L
GRJ43DR72E474KWJ1L
GRJ55DR72E474KWJ1L
GRJ55DR72E684KWJ1L
GRJ55DR72E105KWJ1L
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
1000pF 10ꢀ
1500pF 10ꢀ
2200pF 10ꢀ
3300pF 10ꢀ
4700pF 10ꢀ
6800pF 10ꢀ
10000pF 10ꢀ
15000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
68000pF 10ꢀ
68000pF 10ꢀ
0.10µF 10ꢀ
0.10µF 10ꢀ
0.15µF 10ꢀ
0.15µF 10ꢀ
0.22µF 10ꢀ
0.22µF 10ꢀ
0.33µF 10ꢀ
0.33µF 10ꢀ
0.47µF 10ꢀ
0.47µF 10ꢀ
0.68µF 10ꢀ
1.0µF 10ꢀ
2
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.6
1.25
1.6
1.6
1.6
1.6
2.5
1.6
2.5
2.5
3.2
2.5
3.2
3.2
5
1
1
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
0.7mm
1.2mm
0.7mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
2.2mm
1.2mm
2.2mm
2.2mm
3.2mm
2.2mm
3.2mm
3.2mm
3.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
2
1
2
1
2
1
2
1
2
1.45
1.45
1.25
1.45
1.25
1.8
1.8
1.25
1.5
1.8
2
2
3.2
2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
3.2
4.5
4.5
5.7
4.5
5.7
5.7
5.7
1.5
1.5
2
2
2
2
3.2
5
2
2
5
2
5
2
Continued on the following page.
148
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GRJ31BR72J102KWJ1L
GRJ31BR72J152KWJ1L
GRJ31BR72J222KWJ1L
GRJ31BR72J332KWJ1L
GRJ31BR72J472KWJ1L
GRJ31BR72J682KWJ1L
GRJ31BR72J103KWJ1L
GRJ31CR72J153KWJ3L
GRJ31CR72J223KWJ3L
GRJ32QR72J223KWJ1L
GRJ32DR72J333KWJ1L
GRJ32DR72J473KWJ1L
GRJ43QR72J683KWJ1L
GRJ43DR72J104KWJ1L
GRJ55DR72J154KWJ1L
GRJ55DR72J224KWJ1L
GRJ31BR73A471KWJ1L
GRJ31BR73A681KWJ1L
GRJ31BR73A102KWJ1L
GRJ31BR73A152KWJ1L
GRJ31BR73A222KWJ1L
GRJ31BR73A332KWJ1L
GRJ31BR73A472KWJ1L
GRJ31CR73A682KWJ3L
GRJ32QR73A682KWJ1L
GRJ31CR73A103KWJ3L
GRJ32QR73A103KWJ1L
GRJ32DR73A153KWJ1L
GRJ32DR73A223KWJ1L
GRJ43DR73A333KWJ1L
GRJ43DR73A473KWJ1L
GRJ55DR73A683KWJ1L
GRJ55DR73A104KWJ1L
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
1000Vdc
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
1000pF 10ꢀ
1500pF 10ꢀ
2200pF 10ꢀ
3300pF 10ꢀ
4700pF 10ꢀ
6800pF 10ꢀ
10000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
68000pF 10ꢀ
0.10µF 10ꢀ
0.15µF 10ꢀ
0.22µF 10ꢀ
470pF 10ꢀ
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
4.5
5.7
5.7
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
4.5
5.7
5.7
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.5
2.5
2.5
3.2
3.2
5
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.8
1.8
1.5
2
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
2.2mm
2.2mm
3.2mm
3.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
2.2mm
2.2mm
3.2mm
3.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
1.5
2
2
5
2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.5
1.6
2.5
2.5
2.5
3.2
3.2
5
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.8
1.5
1.8
1.5
2
680pF 10ꢀ
1000pF 10ꢀ
1500pF 10ꢀ
2200pF 10ꢀ
3300pF 10ꢀ
4700pF 10ꢀ
6800pF 10ꢀ
6800pF 10ꢀ
10000pF 10ꢀ
10000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
68000pF 10ꢀ
0.10µF 10ꢀ
2
2
2
2
5
2
149
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRJ Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125°C
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the Table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4
Dielectric Strength No defects or abnormalities
Rated Voltage
DC250V
DC630V
Test Voltage
200% of the rated voltage
150% of the rated voltage
120% of the rated voltage
DC1kV
The insulation resistance should be measured with DC500 50V
(DC250 25V in case of rated voltage: DC250V) and within 60 5
sec. of charging.
Insulation Resistance
(I.R.)
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
5
6
7
Capacitance
Within the specified tolerance
0.025 max.
The capacitance/D.F. should be measured at a frequency of
1 0.2kHz and a voltage of AC1 0.2V(r.m.s.).
Dissipation
Factor (D.F.)
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
2
3
4
5
25 2
Min. Operating Temp. 3
25 2
Max. Operating Temp. 2
25 2
Capacitance
Temperature
Characteristics
Cap. Change
Within 15%
(Temp. Range: –55 to +125°C)
8
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Adhesive Strength
of Termination
9
No removal of the terminations or other defect should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
10
D.F.
0.025 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
150
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRJ Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
ꢅ««i>À>Vi No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
Within 12.5%
b
ø4.5
d
50
Pressurizing
speed: 1.0mm/s
c
20
Pressurize
a
R230
11 ꢃiviVÌ
t : 1.6
100
Fig. 2
ꢃiÃÊ®
Flexure=3 (2mm for 2.0x1.25mm)
LZW
®
Capacitance meter
>
L
V
`
45
45
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
1.2
2.2
2.2
3.5
4.5
4.0
5.0
5.0
7.0
8.0
1.65
2.0
2.ꢀ
3.7
5.6
(in mm)
Fig. 3
1.0
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5ꢀ02) (25% rosin in weight proportion).
Immerse in solder solution for 2 0.5 sec.
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
12
75% of the terminations are to be soldered evenly and continuously.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢁ60A or ꢁ63A ꢂutectic Solder
*
ꢅ««i>À>Vi No marking defects
Preheat the capacitor at 120 to 150°C for 1 min.
Immerse the capacitor in solder solution at 260 5°C for 10 1
sec. Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`\Ê25 2.5mm/s
ꢆ>«>VÌ>ViÊ
Within 10%
ꢆꢂ>}i
D.F.
I.R.
0.025 max.
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
let sit for 24 2 hrs. at room condition.*
,iÃÃÌ>ViÊ
13 ÌÊ-`iÀ}Ê
+ 0
–10
°C for 60 5 min. and then
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
ꢄi>Ì
*Preheating for more than 3.2Z2.5mm
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
-Ìi«
1
2
/i«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/i
1 min.
1 min.
In accordance with item No.4
ꢅ««i>À>Vi No marking defects
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
ꢆ>«>VÌ>ViÊ
Within 7.5%
ꢆꢂ>}i
D.F.
I.R.
0.025 max.
Let sit for 24 2 hrs. at room condition,* then measure.
-Ìi«
/i«iÀ>ÌÕÀiÊcꢆ®
Min. Operating Temp. 3
Room Temp.
/iÊ°®
30 3
2 to 3
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
1
2
3
4
Max. Operating Temp. 2
Room Temp.
30 3
2 to 3
/i«iÀ>ÌÕÀiÊ
ꢆÞVi
14
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+ 0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
Solder resist
Cu
Glass ꢂpoxy Board
Fig. 4
ꢅ««i>À>Vi No marking defects
ꢆ>«>VÌ>ViÊ
Within 15%
ꢆꢂ>}i
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
+24
for 500
hrs.
– 0
ꢄÕ`ÌÞÊ
15 -Ìi>`ÞÊ
-Ì>Ìi®
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
D.F.
I.R.
0.05 max.
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+ 0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
151
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRJ Series Specifications and Test Methods
Continued from the preceding page.
No.
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
+48
– 0
ꢅ««i>À>Vi No marking defects
ꢆ>«>VÌ>ViÊ Within 15% ꢁrated voltage: ꢂC250V, ꢂC630Vꢃ
Apply voltage as in Table for 1,000
hrs. at maximum
operating temperature 3°C. Remove and let sit for 24 2 hrs. at
room condition,* then measure.
ꢆꢂ>}i
Within 20% ꢁrated voltage: ꢂC1kVꢃ
,>Ìi`Ê6Ì>}i
ꢂC250V
ꢂC630V
ꢅ««i`Ê6Ì>}i
D.F.
0.05 max.
150% of the rated voltage
120% of the rated voltage
110% of the rated voltage
16 ꢇvi
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
I.R.
ꢂC1kV
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
ꢅ««i>À>Vi No marking defects
ꢆ>«>VÌ>ViÊ
Within 15%
ꢆꢂ>}i
Apply the rated voltage at 40 2°C and relative humidity of ꢀ0 to
+24
ꢄÕ`ÌÞÊ
ꢀ5% for 500
– 0
hrs.
ꢇ>`}Ê
ꢅ««V>Ì\Ê
ꢃꢆÓxä6]Ê
ꢃꢆÈÎä6Ê
Ìi®
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
D.F.
I.R.
0.05 max.
17
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
152
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
Anti-
noise
Large Capacitance and High Allowable Ripple Current GR3 Series
e
g
e
Features
c
1. This series can provide higher capacitance value under
DC-Bias condition, compare with previous X7R char.
2. Improve the performance of ripple-resistance compared
with X7R char.
L
W
Dimensions (mm)
T
Part Number
L
W
e
g min.
GR321A
GR321B
GR331A
GR331B
GR331C
GR332Q
GR332D
GR343Q
GR343D
GR355D
GR355X
1.0+0,-0.3
1.25 0.2
2.0 0.2 1.25 0.2
0.7
3. Reduce acoustic noise.
1.0+0,-0.3
3.2 0.2 1.6 0.2 1.25+0,-0.3
1.6 0.2
4. High reliability for board bending stress
5. Sn-plated external electrodes provide good soldering,
and other types with reflow soldering only.
6. Use the GR321/331 types with flow or reflow soldering,
and other types with reflow soldering only.
1.2
1.5+0,-0.3 0.3 min.
2.0+0,-0.3
3.2 0.3 2.5 0.2
4.5 0.4 3.2 0.3
5.7 0.4 5.0 0.4
1.5+0,-0.3
2.2
3.2
2.0+0,-0.3
2.0+0,-0.3
2.7+0,-0.3
Applications
c
1. DC smoothing & EMI filiter for LED Lighting.
2. For PFC circuit in the swiching power supplies,
AC adaptor.
3. DC-DC converter for general electronic equipment.
Do not use these products in any Automotive
Power train or Safety equipment incliding Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
appliations such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
max.
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
(mm)
GR321AD72E103KW01D
GR321AD72E153KW01D
GR321BD72E223KW03L
GR331AD72E333KW01D
GR331BD72E473KW01L
GR331CD72E683KW03L
GR332QD72E104KW01L
GR332DD72E154KW01L
GR343QD72E224KW01L
GR343DD72E334KW01L
GR355DD72E474KW01L
GR355DD72E684KW01L
GR355XD72E105KW05L
GR331AD72W103KW01D
GR331AD72W153KW01D
GR331BD72W223KW01L
GR331BD72W333KW01L
GR331CD72W473KW03L
GR332DD72W683KW01L
GR332DD72W104KW01L
GR343DD72W154KW01L
GR355DD72W224KW01L
GR355DD72W334KW01L
GR355DD72W474KW01L
GR355XD72W564KW05L
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
250Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
10000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
68000pF 10ꢀ
0.10µF 10ꢀ
0.15µF 10ꢀ
0.22µF 10ꢀ
0.33µF 10ꢀ
0.47µF 10ꢀ
0.68µF 10ꢀ
1.0µF 10ꢀ
2
1.25
1.25
1.25
1.6
1.6
1.6
2.5
2.5
3.2
3.2
5.0
5.0
5.0
1.6
1.6
1.6
1.6
1.6
2.5
2.5
3.2
5.0
5.0
5.0
5.0
1
1
0.7mm
0.7mm
0.7mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
2.2mm
2.2mm
3.2mm
3.2mm
3.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
2.2mm
3.2mm
3.2mm
3.2mm
3.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
2
1.45
1
3.2
3.2
3.2
3.2
3.2
4.5
4.5
5.7
5.7
5.7
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
5.7
5.7
5.7
5.7
1.25
1.8
1.5
2
1.5
2
2
2
2.7
1
10000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
68000pF 10ꢀ
0.10µF 10ꢀ
0.15µF 10ꢀ
0.22µF 10ꢀ
0.33µF 10ꢀ
0.47µF 10ꢀ
0.56µF 10ꢀ
1
1.25
1.25
1.8
2
2
2
2
2
2
2.7
Continued on the following page.
153
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GR331BD72J103KW01L
GR331CD72J153KW03L
GR332QD72J223KW01L
GR332DD72J333KW01L
GR332DD72J473KW01L
GR343DD72J683KW01L
GR355DD72J104KW01L
GR355DD72J154KW01L
GR355XD72J224KW05L
GR355XD72J274KW05L
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
10000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
68000pF 10ꢀ
0.1µF 10ꢀ
3.2
3.2
3.2
3.2
3.2
4.5
5.7
5.7
5.7
5.7
1.6
1.6
2.5
2.5
2.5
3.2
5.0
5.0
5.0
5.0
1.25
1.8
1.5
2
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
2.2mm
3.2mm
3.2mm
3.2mm
3.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
2
2
0.15µF 10ꢀ
0.22µF 10ꢀ
0.27µF 10ꢀ
2
2.7
2.7
154
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR3 Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125°C
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in Table is applied
between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4
Dielectric Strength No defects or abnormalities
Rated Voltage
DC250V
DC450V
Test Voltage
200% of the rated voltage
150% of the rated voltage
120% of the rated voltage
DC630V
The insulation resistance should be measured with DC500 50V
(DC250 25V in case of rated voltage: DC250V, DC450V) and
within 60 5 sec. of charging.
Insulation Resistance
(I.R.)
5
More than 10,000MΩ or 100MΩ s & ꢀ7HICHEVER IS SMALLERꢁ
6
7
Capacitance
Within the specified tolerance
0.01 max.
The capacitance/D.F. should be measured at a frequency of
1 0.2kHz and a voltage of AC1 0.2V(r.m.s.).
Dissipation
Factor (D.F.)
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
2
3
4
5
25 2
Min. Operating Temp. 3
25 2
Max. Operating Temp. 2
25 2
Capacitance
Temperature
Characteristics
Cap. Change
+22
8
Within
%
–33
(Temp. Range: –55 to +125°C)
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Adhesive Strength
of Termination
9
No removal of the terminations or other defect should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
10
D.F.
0.01 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
155
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR3 Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
No marking defects
3OLDER THE CAPACITOR TO THE TESTING JIG ꢀGLASS EPOXY BOARDꢁ SHOWN
IN &IGꢂ ꢊꢂ
4HEN APPLY A FORCE IN THE DIRECTION SHOWN IN &IGꢂ ꢌꢂ
4HE SOLDERING SHOULD BE DONE USING THE REFLOW METHOD AND
SHOULD BE CONDUCTED WITH CARE SO THAT THE SOLDERING IS UNIFORM
and free of defects such as heat shock.
B
ø4.5
d
c
a
50
Pressurizing
20
t : 1.6
speed : 1.0mm/s
100
11 ꢃiviVÌ
Pressurize
R230
&IGꢂ ꢊ
ꢃiÃÊ®
LZW
®
&LEXUREꢏꢊ ꢀꢆMM FOR ꢊꢂꢇZꢆꢂꢊꢈMMꢁ
>
L
V
`
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
1.2
2.2
2.2
3.5
4.5
4.0
5.0
5.0
7.0
8.0
1.65
2.0
2.ꢀ
3.7
5.6
Capacitance meter
45
45
1.0
ꢀIN MMꢁ
&IGꢂ ꢌ
)MMERSE THE CAPACITOR IN A SOLUTION OF ETHANOL ꢀ*)3ꢄ+ꢄꢅꢆꢇꢆꢁ AND
ROSIN ꢀ*)3ꢄ+ꢄꢈꢉꢇꢊꢁ ꢀꢊꢈꢋ ROSIN IN WEIGHT PROPORTIONꢁꢂ
Immerse in solder solution for 2 0.5 sec.
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
12
ꢎꢈꢋ OF THE TERMINATIONS ARE TO BE SOLDERED EVENLY AND CONTINUOUSLYꢂ
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 ꢈ # ,EAD &REE 3OLDER ꢀ3Nꢄꢌꢂꢇ!Gꢄꢇꢂꢈ#Uꢁ
235 ꢈ # (ꢍꢇ! OR (ꢍꢌ! %UTECTIC 3OLDER
*
ꢅ««i>À>Vi No marking defects
Preheat the capacitor at 120 to 150°C for 1 min.
Immerse the capacitor in solder solution at 260 5°C for 10 1
sec. Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`\Ê25 2.5mm/s
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
Within 10%
D.F.
I.R.
0.01 max.
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
let sit for 24 2 hrs. at room condition.*
,iÃÃÌ>ViÊ
13 ÌÊ-`iÀ}Ê
+ 0
–10
°C for 60 5 min. and then
More than 10,000MΩ or 100MΩ s & ꢀ7HICHEVER IS SMALLERꢁ
ꢄi>Ì
*Preheating for more than 3.2Z2.5mm
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
-Ìi«
/i«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/i
1 min.
1 min.
1
2
ꢅ««i>À>Vi No marking defects
&IX THE CAPACITOR TO THE SUPPORTING JIG ꢀGLASS EPOXY BOARDꢁ SHOWN
IN &IGꢂ ꢃꢂ
Perform the 5 cycles according to the 4 heat treatments listed in
THE FOLLOWING TABLEꢂ
ꢆ>«>VÌ>ViÊ
Within 7.5%
ꢆꢂ>}i
D.F.
I.R.
0.01 max.
Let sit for 24 2 hrs. at room condition,* then measure.
-Ìi«
/i«iÀ>ÌÕÀiÊcꢆ®
Min. Operating Temp.Y3
/iÊ°®
30 3
More than 10,000MΩ or 100MΩ s & ꢀ7HICHEVER IS SMALLERꢁ
W0
1
2
3
4
2 to 3
30 3
Room Temp.
Max. Operating Temp.Y0
W2
2 to 3
Room Temp.
/i«iÀ>ÌÕÀiÊ
ꢆÞVi
14
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
+ 0
–10
°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
3OLDER RESIST
Cu
Glass Epoxy Board
&IGꢂ ꢃ
ꢅ««i>À>Vi No marking defects
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
+24
ꢆ>«>VÌ>ViÊ
Within 12.5%
ꢆꢂ>}i
for 500
hrs.
– 0
ꢄÕ`ÌÞÊ
15 -Ìi>`ÞÊ
-Ì>Ìi®
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
D.F.
I.R.
0.02 max.
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150
More than 1,000MΩ or 10MΩ s & ꢀ7HICHEVER IS SMALLERꢁ
+ 0
–10
°C for 60 5 min. and then
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
let sit for 24 2 hrs. at room condition.*
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
156
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR3 Series Specifications and Test Methods
Continued from the preceding page.
No.
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
+48
– 0
ꢅ««i>À>Vi No marking defects
Apply voltage as Table for 1,000
hrs. at maximum
operating temperature 3°C. Remove and let sit for 24 2hrs. at
room condition,* then measure.
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
Within 12.5%
0.02 max.
,>Ìi`Ê6Ì>}i
DC250V
ꢅ««i`Ê6Ì>}i
D.F.
I.R.
150% of the rated voltage
130% of the rated voltage
120% of the rated voltage
16 ꢇvi
DC450V
More than 1,000MΩ or 10MΩ s & ꢀ7HICHEVER IS SMALLERꢁ
DC630V
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
ꢅ««i>À>Vi No marking defects
Apply the rated voltage at 40 2°C and relative humidity of ꢀ0 to
+24
ꢆ>«>VÌ>ViÊ
Within 12.5%
ꢆꢂ>}i
ꢀ5% for 500
– 0
hrs.
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
ꢄÕ`ÌÞÊ
ꢇ>`}Ê
17
D.F.
I.R.
0.02 max.
More than 1,000MΩ or 10MΩ s & ꢀ7HICHEVER IS SMALLERꢁ
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
157
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For LCD Backlight Inverter Circuit GRM/DC3.15kV Series
Features
c
e
g
e
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
realizes high flash-over voltage.
3. A new monolithic structure for small, surface-
mountable devices capable of operating at high
voltage levels.
L
W
4. Sn-plated external electrodes realize good
solderability.
Dimensions (mm)
T
4.5 0.3 2.0 0.2 1.0 +0, -0.3
Part Number
L
W
e min. g min.
5. Only for reflow soldering
GRM42A
0.3
2.9
6. Capacitance values less than 22pF can be used in
LCD backlight inverter circuits as long as
the applied voltage, peak to peak, is less
than 4.0kV at 100kHz or less.
Applications
c
Ideal for use as the ballast in LCD backlight
inverter.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
Part Number
Rated Voltage
Capacitance
max.
(mm)
Electrode e
min.
GRM42A5C3F050DW01L
GRM42A5C3F100JW01L
GRM42A5C3F120JW01L
GRM42A5C3F150JW01L
GRM42A5C3F180JW01L
GRM42A5C3F220JW01L
GRM42A5C3F270JW01L
GRM42A5C3F330JW01L
GRM42A5C3F390JW01L
GRM42A5C3F470JW01L
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
3150Vdc
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
C0G (EIA)
5.0pF 0.5pF
10pF 5ꢀ
12pF 5ꢀ
15pF 5ꢀ
18pF 5ꢀ
22pF 5ꢀ
27pF 5ꢀ
33pF 5ꢀ
39pF 5ꢀ
47pF 5ꢀ
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1
1
1
1
1
1
1
1
1
1
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
2.9mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
158
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM/DC3.15kV Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125ꢀC
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimension
Using calipers and micrometers
No failure should be observed when DC4095V is applied
between the terminations for 1 to 5 sec., provided the charge/
discharge current is less than 50mA.
4
5
Dielectric Strength No defects or abnormalities
Insulation Resistance
More than 10,000MΩ
(I.R.)
The insulation resistance should be measured with DC500 50V
and within 60 5 sec. of charging.
6
7
Capacitance
Q
Within the specified tolerance
1,000 min.
The capacitance/Q should be measured at a frequency of
1 0.2MHz and a voltage of AC0.5 to 5V(r.m.s.).
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
Capacitance
Temperature
Characteristics
Temp. Coefficient
0 30ppm/ꢀC (Temp. Rangeꢁ +25 to +125ꢀC)
0+30, –72ppm/ꢀC (Temp. Rangeꢁ –55 to +25ꢀC)
1
2
3
4
5
25 2
Min. Operating Temp. 3
25 2
Max. Operating Temp. 2
25 2
8
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Adhesive Strength
of Termination
9
No removal of the terminations or other defect should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
Appearance
Capacitance
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
Q
10
1,000 min.
Solder resist
Cu
Glass Epoxy Board
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
50
Pressurizing
a
20
speedꢁ 1.0mm/s
t ꢁ 1.6
100
11 Deflection
Pressurize
R230
Fig. 2
Dimension (mm)
LZW
(mm)
4.5Z2.0
Flexure=1
a
3.5
b
c
d
1.0
Capacitance meter
45 45
7.0
2.4
(in mm)
Fig. 3
Continued on the following page.
159
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM/DC3.15kV Series Specifications and Test Methods
Continued from the preceding page.
No.
12
Item
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5ꢀ02) (25% rosin in weight proportion). Immerse in
solder solution for 2 0.5 sec.
Solderability of
Termination
75% of the terminations are to be soldered evenly
and continuously.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢁ60A or ꢁ63A ꢂutectic Solder
Appearance
No marking defects
Within 2.5%
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260 5°C for 10 1 sec.
Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`: 25 2.5mm/s
Capacitance
Change
,iÃÃÌ>ViÊ
13 to Soldering
Heat
Q
1,000 min.
*Preheating
I.R.
More than 10,000MΩ
Step
1
2
Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Within 2.5%
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Capacitance
Change
Q
1,000 min.
Let sit for 24 2 hrs. at room condition,* then measure.
I.R.
Step
Temperature (°C)
Min. Operating Temp. 3
Room Temp.
Max. Operating Temp. 2
Room Temp.
Time (min.)
30 3
2 to 3
30 3
2 to 3
More than 10,000MΩ
1
2
3
4
Temperature
Cycle
14
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass ꢂpoxy Board
Fig. 4
Appearance
No marking defects
Within 5.0%
Capacitance
Change
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
for 500Y 0hrs.
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
Humidity
15 (Steady
State)
W24
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
No marking defects
Within 3.0%
Appearance
Capacitance
Change
W48
Apply 120% of the rated voltage for 1,000Y 0hrs. at maximum
operating temperature 3°C.
16 Life
Q
350 min.
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
The charge/discharge current is less than 50mA.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
160
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For Information Devices GR4 Series
e
g
e
Features
c
1. These items are designed specifically for
telecommunications devices (IEEE802.3) in
Ethernet LAN and primary-secondary coupling for
DC-DC converters.
L
W
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels
Dimensions (mm)
Part Number
L
W
T
e min. g min.
GR442Q
GR443D
GR443Q
GR455D
4.5 0.ꢀ 2.0 0.2
1.5 +0, -0.ꢀ
2.0 +0, -0.ꢀ
1.5 +0, -0.ꢀ
2.0 +0, -0.ꢀ
2.5
0.ꢀ
3. Sn-plated external electrodes realize good
solderability.
4.5 0.4 ꢀ.2 0.ꢀ
5.7 0.4 5.0 0.4
ꢀ.2
4. Only for reflow soldering
Applications
c
1. Ideal for use on telecommunications devices in
Ethernet LAN
2. Ideal for use as primary-secondary coupling for
DC-DC converters
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
max.
(mm)
Electrode e
GR442QR73D101KW01L
GR442QR73D121KW01L
GR442QR73D151KW01L
GR442QR73D181KW01L
GR442QR73D221KW01L
GR442QR73D271KW01L
GR442QR73D331KW01L
GR442QR73D391KW01L
GR442QR73D471KW01L
GR442QR73D561KW01L
GR442QR73D681KW01L
GR442QR73D821KW01L
GR442QR73D102KW01L
GR442QR73D122KW01L
GR442QR73D152KW01L
GR443QR73D182KW01L
GR443QR73D222KW01L
GR443QR73D272KW01L
GR443QR73D332KW01L
GR443QR73D392KW01L
GR443DR73D472KW01L
GR455DR73D103KW01L
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
2000Vdc
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
100pF 10ꢀ
120pF 10ꢀ
150pF 10ꢀ
180pF 10ꢀ
220pF 10ꢀ
270pF 10ꢀ
330pF 10ꢀ
390pF 10ꢀ
470pF 10ꢀ
560pF 10ꢀ
680pF 10ꢀ
820pF 10ꢀ
1000pF 10ꢀ
1200pF 10ꢀ
1500pF 10ꢀ
1800pF 10ꢀ
2200pF 10ꢀ
2700pF 10ꢀ
3300pF 10ꢀ
3900pF 10ꢀ
4700pF 10ꢀ
10000pF 10ꢀ
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.7
2
2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
3.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2
2
2
2
2
2
2
2
2
2
2
2
2
3.2
3.2
3.2
3.2
3.2
3.2
5
2
161
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR4 Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125°C
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the table is
applied between the terminations, provided the charge/discharge
current is less than 50mA.
4
5
Dielectric Strength No defects or abnormalities
Rated Voltage
Test Voltage
120% of the rated voltage
AC1500V(r.m.s.)
Time
60 1 sec.
60 1 sec.
DC2kV
10 impulses of alternating polarity are subjected.
(5 impulses for each polarity)
The interval between impulses is 60 sec.
Applied Pulse: 1.2/50μs
No self healing breakdowns or flash-overs have taken place in
*ÕÃiÊ6Ì>}i
the capacitor.
Applied Voltage: 2.5kVo-p
Insulation Resistance
(I.R.)
The insulation resistance should be measured with DC500 50V
and within 60 5 sec. of charging.
6
7
8
More than 6,000MΩ
Within the specified tolerance
0.025 max.
Capacitance
The capacitance/D.F. should be measured at a frequency of
1 0.2kHz and a voltage of AC1 0.2V(r.m.s.).
Dissipation
Factor (D.F.)
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
2
ꢀ
4
5
25 2
Min. Operating Temp. ꢀ
25 2
Max. Operating Temp. 2
25 2
Capacitance
Temperature
Characteristics
Cap. Change
within 15%
(Temp. Range: –55 to +125°C)
9
U*ÀiÌÀi>ÌiÌ
W0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Adhesive Strength
of Termination
10
No removal of the terminations or other defect should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
Appearance
Capacitance
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of ꢀ mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
D.F.
11
0.025 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to ꢀ5°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
162
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR4 Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
50
a
Pressurizing
20
speed: 1.0mm/s
t : 1.6
12 ꢃiviVÌ
100
Pressurize
R230
Fig. 2
ꢃiÃÊ®
Flexure=1
LZW
®
4.5Z2.0
4.5Z3.2
5.7Z5.0
>
L
V
`
Capacitance meter
45 45
3.5
3.5
4.5
7.0
7.0
8.0
2.4
3.7
5.6
(in mm)
1.0
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5ꢀ02) (25% rosin in weight proportion).
Immerse in solder solution for 2 0.5 sec.
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
13
75% of the terminations are to be soldered evenly and continuously.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢁ60A or ꢁ63A ꢂutectic Solder
ꢅ««i>À>Vi
No marking defects
Within 10%
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260 5°C for 10 1
sec. Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`: 25 2.5mm/s
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
D.F.
I.R.
0.025 max.
U*ÀiÌÀi>ÌiÌ
W 0
,iÃÃÌ>ViÊ
14 ÌÊ-`iÀ}Ê
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
More than 1,000MΩ
ꢄi>Ì
**Àiꢂi>Ì}
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
-Ìi«
1
2
/i«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/i
1 min.
1 min.
ꢅ««i>À>Vi
No marking defects
Within 15%
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
D.F.
I.R.
0.05 max.
Let sit for 24 2 hrs. at room condition,* then measure.
-Ìi«
/i«iÀ>ÌÕÀiÊcꢆ®
Min. Operating Temp. 3
Room Temp.
/iÊ°®
30 3
2 to 3
More than 3,000MΩ
1
2
3
4
Max. Operating Temp. 2
Room Temp.
30 3
2 to 3
/i«iÀ>ÌÕÀiÊ
ꢆÞVi
15
U*ÀiÌÀi>ÌiÌ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
Solder resist
Cu
Glass ꢂpoxy Board
Fig. 4
ꢅ««i>À>Vi
No marking defects
Within 15%
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
W24
for 500Y 0hrs.
ꢄÕ`ÌÞÊ
Remove and let sit for 24 2 hrs. at room condition,* then
16 -Ìi>`ÞÊ D.F.
0.05 max.
measure.
-Ì>Ìi®
U*ÀiÌÀi>ÌiÌ
I.R.
More than 1,000MΩ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
let sit for 24 2 hrs. at room condition.*
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
163
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR4 Series Specifications and Test Methods
Continued from the preceding page.
No.
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢁiÌꢂ`
ꢅ««i>À>Vi
No marking defects
Within 20%
W48
Apply 110% of the rated voltage for 1,000Y 0hrs. at maximum
operating temperature 3°C. Remove and let sit for 24 2 hrs. at
room condition,* then measure.
ꢆ>«>VÌ>ViÊ
ꢆꢂ>}i
17 ꢇvi
D.F.
I.R.
0.05 max.
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
More than 2,000MΩ
ꢃiiVÌÀVÊ
-ÌÀi}Ìꢂ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
164
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For Camera Flash Circuit GR7 Series
e
g
e
Features
c
1. Suitable for the trigger of the flash circuit,
because real capacitance is stable during
operating voltage.
L
W
2. The thin type fits thinner cameras.
3. Sn-plated external electrodes realize good
solderability.
Dimensions (mm)
Part Number
L
W
T
e min. g min.
GR721A
GR721B
GR731A
GR731B
GR731C
1.0 +0, -0.3
1.25 0.2
1.0 +0, -0.3
2.0 0.2 1.25 0.2
0.7
4. For flow and reflow soldering
0.3
1.2
3.2 0.2 1.6 0.2 1.25 +0, -0.3
1.6 0.2
Applications
c
For strobe circuit
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
max.
(mm)
Electrode e
GR721AW0BB103KW01D
GR731AW0BB103KW01D
GR721AW0BB153KW01D
GR731AW0BB153KW01D
GR721BW0BB223KW03L
GR731AW0BB223KW01D
GR731BW0BB223KW01L
GR721BW0BB273KW03L
GR731AW0BB273KW01D
GR731AW0BB333KW01D
GR731BW0BB333KW01L
GR731CW0BB473KW03L
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
350Vdc
-
-
-
-
-
-
-
-
-
-
-
-
10000pF 10ꢀ
10000pF 10ꢀ
15000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
22000pF 10ꢀ
22000pF 10ꢀ
27000pF 10ꢀ
27000pF 10ꢀ
33000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
2
1.25
1.6
1
1
0.7mm
1.2mm
0.7mm
1.2mm
0.7mm
1.2mm
1.2mm
0.7mm
1.2mm
1.2mm
1.2mm
1.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
3.2
2
1.25
1.6
1
3.2
2
1
1.25
1.6
1.45
1
3.2
3.2
2
1.6
1.25
1.45
1
1.25
1.6
3.2
3.2
3.2
3.2
1.6
1
1.6
1.25
1.8
1.6
165
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR7 Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125°C
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Using calipers and micrometers
Dimensions
Within the specified dimensions
No failure should be observed when ꢀC500V is applied between
the terminations for 1 to 5 sec., provided the charge/discharge
current is less than 50mA.
4
Dielectric Strength No defects or abnormalities
Insulation Resistance
(I.R.)
The insulation resistance should be measured with ꢀC250 50V
and within 60 5 sec. of charging.
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
5
6
7
Capacitance
Within the specified tolerance
The capacitance/ꢀ.F. should be measured at a frequency of
1 0.2kHz and a voltage of AC1 0.2V(r.m.s.).
Dissipation
Factor (D.F.)
0.025 max.
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
2
3
4
5
25 2
Min. Operating Temp. 3
25 2
Max. Operating Temp. 2
25 2
Cap. Change
Capacitance
Temperature
Characteristics
Within 10% (Apply ꢀC350V bias)
8
W22
Within Y33% (No ꢀC bias)
(Temp. Range : –55 to +125°C)
U*ÀiÌÀi>ÌiÌ
W0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Adhesive Strength
of Termination
9
No removal of the terminations or other defect should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
Appearance
Capacitance
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
D.F.
10
0.025 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
166
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR7 Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
-«iVvV>ÌÃ
/iÃÌÊꢂ iÌꢃ`
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
50
Pressurizing
20
a
speed: 1.0mm/s
11 Deflection
t : 1.6
100
Pressurize
R230
Fig. 2
ꢁiÃÊ®
Flexure=1
LZW
(mm)
2.0Z1.25
3.2Z1.6
Capacitance meter
45 45
a
1.2
2.2
b
c
d
(in mm)
4.0
5.0
1.65
2.0
1.0
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5ꢀ02) (25% rosin in weight proportion).
Immerse in solder solution for 2 0.5 sec.
Solderability of
Termination
12
75% of the terminations are to be soldered evenly and continuously.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢁ60A or ꢁ63A Eutectic Solder
Appearance
No marking defects
Within 10%
Capacitance
Change
Preheat the capacitor at 120 to 150°C for 1 min.
Immerse the capacitor in solder solution at 260 5°C for 10 1
sec. Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`: 25 2.5mm/s
,iÃÃÌ>ViÊ
13 to Soldering
Heat
D.F.
I.R.
0.025 max.
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
U*ÀiÌÀi>ÌiÌ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Dielectric
Strength
In accordance with item No.4
No marking defects
Within 7.5%
Appearance
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Capacitance
Change
D.F.
I.R.
0.025 max.
Let sit for 24 2 hrs. at room condition,* then measure.
Step
Temperature (°C)
Min. Operating Temp. 3
Room Temp.
Time (min.)
30 3
2 to 3
CU0.01μF: More than 100MΩ s &
CF0.01μF: More than 10,000MΩ
1
2
3
4
Max. Operating Temp. 2
Room Temp.
30 3
2 to 3
Temperature
Cycle
14
U*ÀiÌÀi>ÌiÌ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
Appearance
No marking defects
Within 15%
Capacitance
Change
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
W24
for 500Y 0 hrs.
Humidity
15 (Steady
State)
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
D.F.
I.R.
0.05 max.
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
s0RETREATMENT
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
Dielectric
Strength
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
167
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GR7 Series Specifications and Test Methods
Continued from the preceding page.
No.
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢂ iÌꢃ`
ꢆ««i>À>Vi
No marking defects
Within 15%
W48
Apply DC350V for 1,000Y 0 hrs. at maximum operating
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
temperature 3°C. Remove and let sit for 24 2 hrs. at room
condition,* then measure.
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
D.F.
I.R.
0.05 max.
16 ꢅvi
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
In accordance with item No.4
No marking defects
Within 15%
ꢆ««i>À>Vi
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
Apply the rated voltage at 40 2°C and relative humidity of ꢀ0 to
W24
ꢀ5% for 500Y 0 hrs.
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
ꢄÕ`ÌÞÊ D.F.
ꢅ>`}Ê
0.05 max.
17
CU0.01μF: More than 10MΩ s &
CF0.01μF: More than 1,000MΩ
I.R.
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
168
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
AC250V Type (Which Meet Japanese Law) GA2 Series
e
g
e
Features
c
1. Chip monolithic ceramic capacitor for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
L
W
3. Sn-plated external electrodes realize good
solderability.
Dimensions (mm)
T
2.0 0.2 1.5 +0, -0.3
Part Number
L
W
e min. g min.
GA242Q
GA243D
GA243Q
GA255D
4.5 0.3
4. Only for reflow soldering
2.0 +0, -0.3
1.5 +0, -0.3
2.5
0.3
4.5 0.4
5.7 0.4
3.2 0.3
5. Capacitance 0.01 to 0.1uF for connecting lines and
470 to 4700pF for connecting lines to earth.
5.0 0.4 2.0 +0, -0.3
3.2
Applications
c
Noise suppression filters for switching power supplies,
telephones, facsimiles, modems.
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Reference Standard
c
GA2 series obtains no safety approval.
This series is based on the standards of the
electrical appliance and material safety law of Japan
(separated table 4).
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
Part Number
Rated Voltage
Capacitance
Electrode e
min.
(mm)
GA242QR7E2471MW01L
GA242QR7E2102MW01L
GA243QR7E2222MW01L
GA243QR7E2332MW01L
GA243DR7E2472MW01L
GA243QR7E2103MW01L
GA243QR7E2223MW01L
GA243DR7E2473MW01L
GA255DR7E2104MW01L
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
470pF 20ꢀ
1000pF 20ꢀ
2200pF 20ꢀ
3300pF 20ꢀ
4700pF 20ꢀ
10000pF 20ꢀ
22000pF 20ꢀ
47000pF 20ꢀ
0.10µF 20ꢀ
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.7
2.0
2.0
3.2
3.2
3.2
3.2
3.2
3.2
5.0
1.5
1.5
1.5
1.5
2
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
3.2mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
1.5
1.5
2
2
169
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GA2 Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125°C
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the table is
applied between the terminations for 60 1 sec., provided the
charge/discharge current is less than 50mA.
4
Dielectric Strength No defects or abnormalities
Nominal Capacitance
CU10,000pF
Test Voltage
AC575V (r.m.s.)
AC1500V (r.m.s.)
CF10,000pF
Insulation Resistance
More than 2,000MΩ
(I.R.)
The insulation resistance should be measured with DC500 50V
and within 60 5 sec. of charging.
5
6
7
Capacitance
Within the specified tolerance
0.025 max.
The capacitance/D.F. should be measured at a frequency of
1 0.2kHz and a voltage of AC1 0.2V (r.m.s.).
Dissipation
Factor (D.F.)
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
2
3
4
5
25 2
Min. Operating Temp. 3
25 2
Max. Operating Temp. 2
25 2
Capacitance
Temperature
Characteristics
Cap. Change
Within 15%
(Temp. Range: –55 to +125°C)
8
U*ÀiÌÀi>ÌiÌ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
R3
R1
Discharge
Test
(Application:
Nominal
Capacitance
CF10,000pF)
9
Appearance
No defects or abnormalities
R2
Ct
10kV
V
Cd
Ct: Capacitor under test Cd: 0.001μF
R1: 1,000Ω R2: 100MΩ R3: Surge resistance
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
Adhesive Strength
of Termination
10
No removal of the terminations or other defects should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
Appearance
Capacitance
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
D.F.
11
0.025 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
170
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GA2 Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢂ iÌꢃ`
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
b
ø4.5
d
c
a
50
Pressurizing
20
t : 1.6
speed: 1.0mm/s
12 ꢁiviVÌ
100
Pressurize
Fig. 2
ꢁiÃÊ®
R230
LZW
®
Flexure=1
>
L
c
`
Capacitance meter
4.5Z2.0
4.5Z3.2
5.7Z5.0
3.5
3.5
4.5
7.0
7.0
8.0
2.4
3.7
5.6
45
45
(in mm)
1.0
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2 0.5 sec.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢀ60A or ꢀ63A ꢁutectic Solder
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
13
14
75% of the terminations are to be soldered evenly and continuously.
ꢆ««i>À>Vi
No marking defects
Within 15%
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
The capacitor should be subjected to 40 2°C, relative humidity of
90 to 98% for 8 hrs., and then removed in room condition* for 16
hrs. until 5 cycles.
ꢄÕ`ÌÞ
ꢀÃÕ>Ì
D.F.
I.R.
0.05 max.
More than 1,000MΩ
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
In accordance with item No.4
No marking defects
Within 10%
ꢆ««i>À>Vi
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260 5°C for 10 1
sec. Let sit at room condition* for 24 2 hrs., then measure.
UꢀiÀÃ}Êëii`: 25 2.5mm/s
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
D.F.
0.025 max.
U*ÀiÌÀi>ÌiÌ
,iÃÃÌ>ViÊ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*
**Àiꢃi>Ì}
15 ÌÊ-`iÀ}Ê I.R.
More than 2,000MΩ
ꢄi>Ì
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
-Ìi«
1
2
/i«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/i
1 min.
1 min.
In accordance with item No.4
ꢆ««i>À>Vi
No marking defects
Within 15%
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
D.F.
I.R.
0.05 max.
Let sit for 24 2 hrs. at room condition,* then measure.
-Ìi«
/i«iÀ>ÌÕÀiÊcꢇ®
Min. Operating Temp. 3
Room Temp.
/iÊ°®
30 3
2 to 3
More than 2,000MΩ
1
2
3
4
Max. Operating Temp. 2
Room Temp.
30 3
2 to 3
/i«iÀ>ÌÕÀiÊ
ꢇÞVi
16
U*ÀiÌÀi>ÌiÌ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
let sit for 24 2 hrs. at room condition.*
In accordance with item No.4
Solder resist
Cu
Glass ꢁpoxy Board
Fig. 4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
171
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GA2 Series Specifications and Test Methods
Continued from the preceding page.
No.
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢂ iÌꢃ`
ꢆ««i>À>Vi
No marking defects
Within 15%
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
W24
for 500Y 0hrs.
ꢄÕ`ÌÞÊ
Remove and let sit for 24 2 hrs. at room condition,* then
17 -Ìi>`ÞÊ
D.F.
I.R.
0.05 max.
measure.
U*ÀiÌÀi>ÌiÌ
Ê-Ì>Ìi®
More than 1,000MΩ
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
let sit for 24 2 hrs. at room condition.*
In accordance with item No.4
No marking defects
Within 20%
ꢆ««i>À>Vi
Apply voltage and time as in Table at maximum operating
temperature 3°C. Remove and let sit for 24 2 hrs. at room
condition,* then measure. The charge / discharge current is
less than 50mA.
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
D.F.
I.R.
0.05 max.
>Êꢇ>«>VÌ>Vi
CU10,000pF
/iÃÌÊ/i
/iÃÌÊ6Ì>}i
AC300V (r.m.s.)
AC500V (r.m.s.)
W48
More than 1,000MΩ
1,000
Y 0 hrs.
W48
*
18 ꢅvi
CF10,000pF
1,500Y 0 hrs.
* Except that once each hour the voltage is increased to
AC1,000V (r.m.s.) for 0.1 sec.
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
In accordance with item No.4
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
ꢆ««i>À>Vi
No marking defects
Within 15%
Apply the rated voltage at 40 2°C and relative humidity of ꢀ0 to
ꢇ>«>VÌ>ViÊ
ꢇꢃ>}i
W24
ꢀ5% for 500Y 0hrs.
Remove and let sit for 24 2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5 min. at test temperature.
Remove and let sit for 24 2 hrs. at room condition.*
ꢄÕ`ÌÞ
19
D.F.
I.R.
0.05 max.
ꢅ>`}
More than 1,000MΩ
ꢁiiVÌÀVÊ
-ÌÀi}Ìꢃ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
172
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC
e
g
e
Features
c
1. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
L
W
3. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
4. Type GC can be used as an X1-class and Y2-class
capacitor, line-by-pass capacitor of UL1414.
5. +125 degree C guaranteed
Dimensions (mm)
e min.
0.ꢀ
Part Number
L
W
T
g min.
ꢁ.0
GA355D
5.7 0.ꢁ 5.0 0.ꢁ 2.0 0.ꢀ
6. Only for reflow soldering
Standard Certification
c
Standard No.
Class
Rated Voltage
Applications
1. Ideal for use as Y capacitor or X capacitor for
c
UL
VDE
UL1ꢁ1ꢁ
Line By-pass
IEC 60ꢀ8ꢁ-1ꢁ
EN 60ꢀ8ꢁ-1ꢁ
various switching power supplies
2. Ideal for modem applications
EN 60065 (1ꢁ.2)
IEC 60ꢀ8ꢁ-1ꢁ
EN 60ꢀ8ꢁ-1ꢁ
AC250V
(r.m.s.)
BSI
X1, Y2
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
IEC 60ꢀ8ꢁ-1ꢁ
EN 60ꢀ8ꢁ-1ꢁ
SEMKO
ESTI
IEC 60ꢀ8ꢁ-1ꢁ
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
Part Number
Rated Voltage
Capacitance
max.
Electrode e
min.
(mm)
GA355DR7GC101KY02L
GA355DR7GC151KY02L
GA355DR7GC221KY02L
GA355DR7GC331KY02L
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
5.7
5.7
5.7
5.7
5.0
5.0
5.0
5.0
2.3
4.0mm
4.0mm
4.0mm
4.0mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2.3
2.3
2.3
173
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class Y2, X1/Y2 Type GF
e
g
e
Features
c
1. Available for equipment based on IEC/EN60950
and UL1950. Besides, the GA352/355 types are
available for equipment based on IEC/EN60065,
UL1492, and UL6500.
L
W
Dimensions (mm)
Part Number
2. Type GF can be used as a Y2-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
L
W
T
e min. g min.
GA342A
GA342D
GA342Q
GA352Q
GA355D
GA355Q
1.0 +0, -0.3
2.0 0.2
1.5 +0, -0.3
1.5 +0, -0.3
2.0 +0, -0.3
1.5 +0, -0.3
4.5 0.3 2.0 0.2
2.8 0.3
2.5
0.3
4.0
5.7 0.4
5.0 0.4
4. +125 degree C guaranteed
5. Only for reflow soldering
Standard Certification
c
Applications
c
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
Status of Certification
Standard
Class
No.
Rated
Voltage
Size : 5.7x2.8mm
Size : 4.5x2.0mm
and over
UL1414
X1, Y2
–
–
–
–
UL
UL 60950-1
AC250V
(r.m.s.)
3. Ideal for use as Y capacitor or X capacitor for
various switching power supplies (GA352/355 types
only)
VDE
X1, Y2
Y2
IEC 60384-14
EN 60384-14
SEMKO
Applications
Size
Communication
network devices
such as a modem
Switching power
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
supplies
–
4.5x2.0mm
5.7x2.8mm and over
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
Part Number
Rated Voltage
Capacitance
Electrode e
min.
(mm)
GA342D1XGF100JY02L
GA342D1XGF120JY02L
GA342D1XGF150JY02L
GA342D1XGF180JY02L
GA342D1XGF220JY02L
GA342A1XGF270JW31L
GA342A1XGF330JW31L
GA342A1XGF390JW31L
GA342A1XGF470JW31L
GA342A1XGF560JW31L
GA342A1XGF680JW31L
GA342A1XGF820JW31L
GA342QR7GF101KW01L
GA342QR7GF151KW01L
GA342DR7GF221KW02L
GA342DR7GF331KW02L
GA342QR7GF471KW01L
GA352QR7GF471KW01L
GA342QR7GF681KW01L
GA352QR7GF681KW01L
GA342DR7GF102KW02L
GA352QR7GF102KW01L
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
SL (JIS)
SL (JIS)
10pF 5ꢀ
12pF 5ꢀ
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.7
4.5
5.7
4.5
5.7
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.8
2.0
2.8
2.0
2.8
2.2
2.2
2.2
2.2
2.2
1
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
4.0mm
2.5mm
4.0mm
2.5mm
4.0mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
SL (JIS)
15pF 5ꢀ
SL (JIS)
18pF 5ꢀ
SL (JIS)
22pF 5ꢀ
SL (JIS)
27pF 5ꢀ
SL (JIS)
33pF 5ꢀ
1
SL (JIS)
39pF 5ꢀ
1
SL (JIS)
47pF 5ꢀ
1
SL (JIS)
56pF 5ꢀ
1
SL (JIS)
68pF 5ꢀ
1
SL (JIS)
82pF 5ꢀ
1
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
470pF 10ꢀ
470pF 10ꢀ
680pF 10ꢀ
680pF 10ꢀ
1000pF 10ꢀ
1000pF 10ꢀ
1.5
1.5
2.2
2.2
1.5
1.5
1.5
1.5
2.2
1.5
Continued on the following page.
174
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
min.
Part Number
Rated Voltage
Capacitance
Electrode e
(mm)
GA352QR7GF152KW01L
GA355QR7GF182KW01L
GA355QR7GF222KW01L
GA355QR7GF332KW01L
GA355DR7GF472KW01L
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
1500pF 10ꢀ
1800pF 10ꢀ
2200pF 10ꢀ
3300pF 10ꢀ
4700pF 10ꢀ
5.7
5.7
5.7
5.7
5.7
2.8
5.0
5.0
5.0
5.0
1.5
1.5
1.5
1.5
2
4.0mm
4.0mm
4.0mm
4.0mm
4.0mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
175
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class Y3 Type GD
e
g
e
Features
c
1. Available for equipment based on IEC/EN60950
and UL1950.
2. Type GD can be used as a Y3-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
L
W
Dimensions (mm)
Part Number
L
W
T
e min. g min.
1.0 +0, -0.3
2.0 0.2
1.5 +0, -0.3
2.0 +0, -0.3
1.5 +0, -0.3
GA342A
GA342D
GA342Q
GA343D
GA343Q
4. +125 degree C guaranteed
4.5 0.3 2.0 0.2
4.5 0.4 3.2 0.3
5. Only for reflow soldering
0.3
2.5
Applications
c
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
Standard Certification
c
Standard No.
Class
Rated Voltage
UL
SEMKO
Applications
Size
4.5x3.2mm and under
UL 60950-1
–
AC250V(r.m.s.)
IEC 60384-14
EN 60384-14
Y3
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
Communication
network devices
such as a modem
Switching power
supplies
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
–
Thickness T
max.
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
Part Number
Rated Voltage
Capacitance
Electrode e
min.
(mm)
GA342D1XGD100JY02L
GA342D1XGD120JY02L
GA342D1XGD150JY02L
GA342D1XGD180JY02L
GA342D1XGD220JY02L
GA342A1XGD270JW31L
GA342A1XGD330JW31L
GA342A1XGD390JW31L
GA342A1XGD470JW31L
GA342A1XGD560JW31L
GA342A1XGD680JW31L
GA342A1XGD820JW31L
GA342QR7GD101KW01L
GA342QR7GD151KW01L
GA342QR7GD221KW01L
GA342QR7GD331KW01L
GA342QR7GD471KW01L
GA342QR7GD681KW01L
GA342QR7GD102KW01L
GA342QR7GD152KW01L
GA343QR7GD182KW01L
GA343QR7GD222KW01L
GA343DR7GD472KW01L
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
SL (JIS)
SL (JIS)
10pF 5ꢀ
12pF 5ꢀ
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.2
3.2
3.2
2.2
2.2
2.2
2.2
2.2
1
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
2.5mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
SL (JIS)
15pF 5ꢀ
SL (JIS)
18pF 5ꢀ
SL (JIS)
22pF 5ꢀ
SL (JIS)
27pF 5ꢀ
SL (JIS)
33pF 5ꢀ
1
SL (JIS)
39pF 5ꢀ
1
SL (JIS)
47pF 5ꢀ
1
SL (JIS)
56pF 5ꢀ
1
SL (JIS)
68pF 5ꢀ
1
SL (JIS)
82pF 5ꢀ
1
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
100pF 10ꢀ
150pF 10ꢀ
220pF 10ꢀ
330pF 10ꢀ
470pF 10ꢀ
680pF 10ꢀ
1000pF 10ꢀ
1500pF 10ꢀ
1800pF 10ꢀ
2200pF 10ꢀ
4700pF 10ꢀ
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
176
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class X2 Type GB
e
g
e
Features
c
1. Type GB can be used as an X2-class capacitor.
2. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
L
W
Dimensions (mm)
Part Number
L
W
T
e min.
g min.
1.5 +0,-0.3
2.0 +0,-0.3
2.5 +0,-0.3
2.9 +0,-0.ꢀ
GA355Q
GA355D
GA355E
GA355X
4. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
5. +125 degree C guaranteed
5.7 0.ꢀ 5.0 0.ꢀ
0.3
3.0
6. Only for reflow soldering
Standard Certification
c
Applications
c
Standard No.
Class
Rated Voltage
Ideal for use as X capacitor for various switching
VDE
SEMKO
IEC 6038ꢀ-1ꢀ
EN 6038ꢀ-1ꢀ
power supplies
AC250V
(r.m.s.)
X2
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
ESTI
IEC 6038ꢀ-1ꢀ
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Electrode g
Part Number
Rated Voltage
Capacitance
max.
(mm)
Electrode e
min.
GA355QR7GB103KW01L
GA355QR7GB153KW01L
GA355DR7GB223KW01L
GA355ER7GB333KW01L
GA355ER7GB473KW01L
GA355XR7GB563KW06L
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
250Vac(r.m.s.)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
10000pF 10ꢀ
15000pF 10ꢀ
22000pF 10ꢀ
33000pF 10ꢀ
47000pF 10ꢀ
56000pF 10ꢀ
5.7
5.7
5.7
5.7
5.7
5.7
5.0
5.0
5.0
5.0
5.0
5.0
1.5
1.5
2
3.0mm
3.0mm
3.0mm
3.0mm
3.0mm
3.0mm
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
0.3mm min.
2.5
2.5
2.9
177
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GA3 Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
–55 to +125°C
–
Temperature Range
2
3
Appearance
No defects or abnormalities
Visual inspection
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the table is
applied between the terminations for 60 1 sec., provided the
charge/discharge current is less than 50mA.
4
5
Dielectric Strength No defects or abnormalities
/iÃÌÊ6Ì>}i
DC1075V
AC1500V (r.m.s.)
AC2000V (r.m.s.)
Type GB
Type GC/GD
Type GF
10 impulses of alternating polarity are subjected.
(5 impulses for each polarity)
The interval between impulses is 60 sec.
Applied Pulse: 1.2/50μs
*ÕÃiÊ6Ì>}i
(Application: Type
GD/GF)
No self healing breakdowns or flash-overs have taken place in
the capacitor.
Applied Voltage: 2.5kVo-p
Insulation Resistance
(I.R.)
The insulation resistance should be measured with DC500 50V
and within 60 5 sec. of charging.
6
More than 6,000MΩ
Ç
Capacitance
Within the specified tolerance
The capacitance/Q/D.F. should be measured at a frequency of
1 0.2kꢁH (SL char.: 1 0.2MꢁH) and a voltage of
AC1 0.2V (r.m.s.).
Char.
X7R
Specification
D.F.V0.025
Dissipation
Factor (D.F.)
Q
8
QUꢀ00+20C*2 (CF30pF)
SL
QU1000
(CU30pF)
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
2
3
ꢀ
5
25 2 (20 2 for SL char.)
Min. Operating Temp. 3
25 2 (20 2 for SL char.)
Max. Operating Temp. 2
25 2 (20 2 for SL char.)
Char.
X7R
Capacitance Change
Within 15%
Capacitance
Temperature
Characteristics
Temperature characteristic guarantee is –55 to +125°C
9
Char.
SL
Temperature Coefficient
+350 to –1000ppm/°C
SL char. :
Temperature characteristic guarantee is +20 to +85°C
The capacitance should be measured at even 85°C between
step 3 and step ꢀ.
U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊVꢀ>À°
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 2ꢀ 2 hrs. at room condition.*1
Appearance
No defects or abnormalities
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
I.R.
More than 1,000MΩ
R3
R1
Discharge
Test
(Application:
Dielectric
Type GC)
10
R2
Ct
10kV
V
Cd
In accordance with item No.ꢀ
Strength
Ct: Capacitor under test Cd: 0.001μF
R1: 1,000Ω R2: 100MΩ R3: Surge resistance
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
Adhesive Strength
of Termination
11
No removal of the terminations or other defect should occur.
10N, 10 1s
Glass Epoxy Board
Fig. 1
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: ꢀ5 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
178
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GA3 Series Specifications and Test Methods
Continued from the preceding page.
°
ꢁÌi
-«iVvV>ÌÃ
/iÃÌÊꢇiÌꢀ`
ꢃ««i>À>Vi
ꢄ>«>VÌ>Vi
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55ꢁz. The
frequency range, from 10 to 55ꢁz and return to 10ꢁz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
6LÀ>ÌÊ
,iÃÃÌ>Vi
12
ꢄꢀ>À°
-«iVvV>Ì
ꢅ°ꢆ°
Q
X7R
D.F.V0.025
QU400+20C*2 (CF30pF)
Sꢀ
QU1000
(CU30pF)
Solder resist
Cu
Glass ꢂpoxy Board
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
b
ø4.5
d
c
a
50
Pressurizing
speed: 1.0mm/s
20
t : 1.6
100
13 ꢅiviVÌ
Pressurize
Fig. 2
ꢅiÃÊ®
R230
LZW
®
4.5Z2.0
4.5Z3.2
5.7Z2.8
5.7Z5.0
Flexure=1
>
L
V
`
Capacitance meter
45 45
3.5
3.5
4.5
4.5
7.0
7.0
8.0
8.0
2.4
3.7
3.2
5.6
(in mm)
1.0
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2 0.5 sec.
Immersing speed: 25 2.5mm/s
Temp. of solder: 245 5°C ꢀead Free Solder (Sn-3.0Ag-0.5Cu)
235 5°C ꢁ60A or ꢁ63A ꢂutectic Solder
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
14
75% of the terminations are to be soldered evenly and continuously.
No marking defects
ꢃ««i>À>Vi
Preheat the capacitor as in table. Immerse the capacitor in
solder solution at 260 5°C for 10 1 sec. ꢀet sit at room
condition*1 for 24 2 hrs., then measure.
UꢁiÀÃ}Êëii`: 25 2.5mm/s
ꢄꢀ>À°
X7R
ꢄ>«>VÌ>ViÊꢄꢀ>}i
Within 10%
ꢄ>«>VÌ>ViÊ
ꢄꢀ>}i
Within 2.5% or 0.25pF
(Whichever is larger)
U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊVꢀ>À°
Sꢀ
W 0
,iÃÃÌ>ViÊ
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*1
15 ÌÊ-`iÀ}Ê
ꢁ°,°
More than 1,000MΩ
ꢂi>Ì
**Àiꢀi>Ì}
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢀ
In accordance with item No.4
-Ìi«
1
2
/i«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/i
1 min.
1 min.
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
179
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GA3 Series Specifications and Test Methods
Continued from the preceding page.
°
ꢁÌi
-«iVvV>ÌÃ
/iÃÌÊꢇiÌꢀ`
ꢃ««i>À>Vi
No marking defects
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24 2 hrs. at room condition,*1 then measure.
ꢄꢀ>À°
X7R
ꢄ>«>VÌ>ViÊꢄꢀ>}i
Within 15%
ꢄ>«>VÌ>ViÊ
ꢄꢀ>}i
Within 2.5% or 0.25pF
(Whichever is larger)
SL
-Ìi«
/i«iÀ>ÌÕÀiÊcꢄ®
Min. Operating Temp. 3
Room Temp.
Max. Operating Temp. 2
Room Temp.
/iÊ°®
30 3
2 to 3
30 3
2 to 3
1
2
3
4
ꢄꢀ>À°
X7R
-«iVvV>Ì
D.F.V0.05
ꢅ°ꢆ°
Q
QU400+20C*2 (CF30pF)
SL
/i«iÀ>ÌÕÀiÊ
ꢄÞVi
QU1000
(CU30pF)
16
U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊVꢀ>À°
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*1
ꢁ°,°
More than 3,000MΩ
W 0
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢀ
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
ꢃ««i>À>Vi
No marking defects
ꢄꢀ>À°
X7R
ꢄ>«>VÌ>ViÊꢄꢀ>}i
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (applied force is 5N)
·Item 13 Deflection
ꢄ>«>VÌ>ViÊ
ꢄꢀ>}i
Within 15%
Within 5.0% or 0.5pF
(Whichever is larger)
SL
ꢂÕ`ÌÞÊ
£Ç -Ìi>`ÞÊ
Ê-Ì>Ìi®
Let the capacitor sit at 40 2°C and relative humidity of ꢀ0 to ꢀ5%
W24
ꢄꢀ>À°
X7R
-«iVvV>Ì
D.F.V0.05
for 500Y 0 hrs.
Remove and let sit for 24 2 hrs. at room condition,*1 then
measure.
ꢅ°ꢆ°
Q
QU275+5/2C*2 (CF30pF)
SL
QU350
(CU30pF)
U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊVꢀ>À°
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
ꢁ°,°
More than 3,000MΩ
let sit for 24 2 hrs. at room condition.*1
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢀ
In accordance with item No.4
No marking defects
ꢃ««i>À>Vi
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
ꢄꢀ>À°
X7R
ꢄ>«>VÌ>ViÊꢄꢀ>}i
Within 20%
Within 3.0% or 0.3pF
(Whichever is larger)
ꢄ>«>VÌ>ViÊ
ꢄꢀ>}i
Front time (T1)=1.2μs=1.67T
Impulse Voltage
SL
Time to half-value (T2)
(%)
=50μs
Each individual capacitor should
be subjected to a 2.5kV (Type
GC/GF: 5kV) Impulse (the
voltage value means zero to
peak) for three times. Then the
capacitors are applied to life test.
100
ꢀ0
50
ꢄꢀ>À°
X7R
-«iVvV>Ì
D.F.V0.05
QU275+5/2C*2 (CF30pF)
30
ꢅ°ꢆ°
Q
0
t
T
SL
T1
QU350
(CU30pF)
T2
W2
Apply voltage as in Table for 1,000 hrs. at 125Y0°C, relative
humidity 50% max.
ꢁ°,°
More than 3,000MΩ
18 ꢈvi
/Þ«i
ꢃ««i`Ê6Ì>}i
AC312.5V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
GB
GC
ꢉꢆ
GD
AC425V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢀ
In accordance with item No.4
Let sit for 24 2 hrs. at room condition,*1 then measure.
U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊVꢀ>À°
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*1
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
180
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GA3 Series Specifications and Test Methods
Continued from the preceding page.
°
Item
-«iVvV>ÌÃ
/iÃÌÊꢇiÌꢀ`
ꢃ««i>À>Vi
No marking defects
ꢄꢀ>À°
X7R
ꢄ>«>VÌ>ViÊꢄꢀ>}i
Within 15%
Within 5.0% or 0.5pF
(Whichever is larger)
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
ꢄ>«>VÌ>ViÊ
ꢄꢀ>}i
SL
Humidity
ꢈ>`}
Apply the rated voltage at 40 2°C and relative humidity of 90 to
95% for 500Y 0hrs. Remove and let sit for 24 2 hrs. at room
condition,*1 then measure.
ꢄꢀ>À°
X7R
-«iVvV>Ì
D.F.V0.05
19
W24
ꢅ°ꢆ°
Q
QU275+5/2C*2 (CF30pF)
SL
U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊVꢀ>À°
QU350
(CU30pF)
W 0
Perform a heat treatment at 150Y10°C for 60 5 min. and then
let sit for 24 2 hrs. at room condition.*1
ꢁ°,°
More than 3,000MΩ
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢀ
In accordance with item No.4
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. after the last discharge.
R
F
L1
L2
S1
C1
C2
L3
C3
L4
Cx
Ct
Ut
S2 UAC
Tr
Oscilloscope
Active
Flammability
20
The cheesecloth should not be on fire.
C1,2 : 1μF 10%
C3
: 0.033μF 5% 10kV
L1 to 4 : 1.5mH 20% 16A Rod core choke
Ct
Cx
F
: 3μF 5% 10kV
: Capacitor under test
: Fuse, Rated 16A
R
: 100Ω 2%
UAC : UR 5%
UR
Ut
: Rated Voltage
: Voltage applied to Ct
Ux
Type
Ui
GD, GB
GC, GF
2.5kV
5kV
Ui
time
The capacitor under test should be held in the flame in the
position which best promotes burning. Each specimen should
be exposed to the flame only once. Time of exposure to flame:
30 sec.
Length of flame : 12 1mm
Gas burner
: Length 35mm min.
Inside Dia. 0.5 0.1mm
Outside Dia. 0.9mm max.
: Butane gas Purity 95% min.
Passive
Flammability
The burning time should not exceed 30 sec.
The tissue paper should not ignite.
Gas
21
Test Specimen
45°
Tissue
About 10mm Thick Board
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
181
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
Capacitance - Temperature Characteristics
c
C0G/U2J/SL Characteristics
X7R Characteristics
20
30
20
10
0
15
U2J
10
X7R Char. Spec.(upper)
5
C0G
SL
0
U2J
C0G
–5
-10
–10
SL
X7R Char. Spec.(lower)
-20
-30
–15
–20
–60 –40 –20
0
20 40 60 80 100 120 140
Temperature (°C)
-60 -40 -20
0
20 40 60
80 100 120 140
Temperature (°C)
GR4 Series
X7T Characteristics
30
20
20
15
10
5
10
0
0
-5
–10
–20
–30
–10
–15
–20
–60 –40 –20
0
20 40 60 80 100 120 140
Temperature (°C)
–60 –40 –20
0
20 40 60 80 100 120 140
Temperature (°C)
Impedance - Frequency Characteristics
c
GRM Series (C0G Char. 250V)
GRM Series (C0G Char. 630V)
100k
10k
1k
10k
1k
22pF
10pF
100
47pF
10pF
100pF
470pF
100
10
47pF
10
100pF
1000pF
1
1
100m
100m
1M
10M
100M
1G
10G
1M
10M
100M
1G
10G
Frequency (Hz)
Frequency (Hz)
Continued on the following page.
182
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
Continued from the preceding page.
Impedance - Frequency Characteristics
c
GRM Series (C0G Char. 1kV)
GRM Series (X7R Char. 250V)
100k
10k
1k
100
10
10pF
1000pF
1k
22pF
47pF
100
10000pF
100000pF
100pF
10
1
100m
10m
1
100m
1M
10M
100M
1G
10G
1M
10M
100M
1G
Frequency (Hz)
Frequency (Hz)
GRM Series (X7R Char. 630V)
GRJ Series (X7R Char. 250V)
100
10
1k
100
10
(1)
(2)
(3)
1000pF
(1) GRJ21AR72E102KWJ1D
(2) GRJ21BR72E103KWJ3L
(3) GRJ31BR72E223KWJ1L
(4) GRJ31CR72E473KWJ3L
(5) GRJ31CR72E104KWJ3L
(6) GRJ55DR72E105KWJ1L
(4)
(5)
1
10000pF
100000pF
1
(6)
0.1
0.01
100m
10m
1M
10M
100M
Frequency (Hz)
1G
1M
10M
Frequency (Hz)
100M
1G
GR3 Series (X7T Char. 250V)
GR4 Series
1k
100
10
(1)
(2)
100
10
100pF
1000pF
(1) GR321AD72E103KW01D
(2) GR332QD72E104KW01L
(3) GR355XD72E105KW05L
1
4700pF
1
(3)
0.1
0.01
100m
10m
1M
10M
100M
Frequency (Hz)
1G
1M
10M
100M
1G
Frequency (Hz)
GA2 Series
GA3 Series (Type GF)
1k
100
10
1K
100
10
1000pF
1000pF
2200pF
10000pF
100000pF
1
1
100m
10m
100m
10m
1M
10M
100M
1G
1M
10M
100M
Frequency (Hz)
1G
Frequency (Hz)
Continued on the following page.
183
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
Continued from the preceding page.
Impedance - Frequency Characteristics
c
c
c
GA3 Series (Type GD)
GA3 Series (Type GB)
1K
100
10
150pF
100
1000pF
10000pF
10
1
2200pF
1
56000pF
0.1
0.01
100m
10m
33000pF
1M
10M
100M
1G
1M
10M
100M
1G
Frequency (Hz)
Frequency (Hz)
Capacitance - AC Voltage Characteristics
GA3 Series (Type GF/GD, X7R Char.)
GA3 Series (Type GB)
at Room Condition (25°C)
60
at Room Condition (25°C)
60
40
20
0
40
20
10000pF
33000pF
56000pF
0
-20
-40
-60
-20
-40
-60
0
500
1000
1500
2000
0
50
100
150
200
250
300
AC Voltage [V(r.m.s.)]
AC Voltage [V(r.m.s.)]
Capacitance - DC Bias Characteristics
GRM/GR3 Series
GR7 Series
20
0
20
0
(1) GR721AW0BB103KW01D
GR721AW0BB153KW01D
GR721BW0BB223KW03L
GR731AW0BB223KW01D
GR721BW0BB273KW03L
GR731AW0BB273KW01D
GR731AW0BB333KW01D
-20
-20
-40
-60
-80
-100
(2)
(2)
(1)
(1) GRM55DR72E105KW01L
(2) GR355XD72E105KW05L
-40
-60
(2) GR731AW0BB103KW01D
GR731AW0BB153KW01D
GR731BW0BB223KW01L
GR731BW0BB333KW01L
GR731CW0BB473KW03L
(1)
-80
-100
0
50
100
150
200
250
0
50
100
150
200
250
300
350
DC Bias (V)
DC Bias (V)
184
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Package
Taping is the standard packaging method.
c Minimum Quantity Guide
Quantity (pcs.)
ø180mm Reel
Dimensions (mm)
Part Number
L
W
T
Paper Tape
Embossed Tape
1.6
0.8
0.8
1.0
1.25
1.0
1.25
1.6
1.0
1.25
1.5
2.0
1.0
1.5
1.5
2.0
2.5
1.5
4,000
-
GRM18
4,000
-
GRJ21/GRM21/GR321/
GR721
2.0
3.2
1.25
1.6
-
3,000
-
4,000
GRJ31/GRM31/GR331/
GR731
-
3,000
2,000
-
-
4,000
-
-
-
-
-
-
-
-
-
3,000
2,000
1,000
3,000
2,000
1,000
1,000
500
GRJ32/GRM32/GR332
3.2
2.5
250Vdc min.
For General Purpose &
Only for Applications
GRM42/GR442
4.5
4.5
2.0
3.2
GRJ43/GRM43/GR343/
GR443
1,000
GRM55
5.7
5.7
5.0
5.0
GRJ55/GRM55/GR355/
GR455
2.0
-
1,000
2.7
1.5
1.5
2.0
2.0
1.0
1.5
2.0
1.5
2.0
1.5
1.5
2.0
2.5
2.7
2.9
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
500
GR355
GA242
5.7
4.5
5.0
2.0
2,000
1,000
AC250V
GA243
GA255
4.5
5.7
3.2
5.0
1,000
1,000
3,000
2,000
GA342
4.5
2.0
2,000
1,000
GA343
GA352
4.5
5.7
3.2
2.8
1,000
Safety Std.
Certification
1,000
1,000
1,000
500
GA355
5.7
5.0
500
500
Continued on the following page.
185
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Package
Continued from the preceding page.
c Tape Carrier Packaging
(1) Appearance of Taping
q Embossed Tape
w Paper Tape
Cover Tape: 0.06mm in thickness
Top Tape: 0.05mm in thickness
Sprocket Hole: As specified in (2)
Sprocket Hole: As specified in (2)
Cavity for Chip: As specified in (2)
Cavity for Chip: As specified in (2)
Bottom Tape: 0.05mm in thickness
Base Tape: As specified in (2)
Base Tape: As specified in (2)
Packed Chips Chip
Packed Chips Chip
(2) Dimensions of Tape
q Embossed Tape
8mm width, 4mm pitch Tape
12mm width, 8mm/4mm pitch Tape
W0.1
Y0
4.0 0.05
2.0 0.05
ø1.5
1
*
8.0 0.1
2.0 0.05
4.0 0.1
W0.1
Y0
0.25 0.1
0.3 0.1
1.75 0.1
ø1.5
4.0 0.1
1.75 0.1
A
A
Direction of Feed
Direction of Feed
2.5 max.
3.7 max.
B*
Part Number
A*
B*
Part Number
A*
2.5
3.6
3.2
5.4
5.1
GRM42/GR442/GA242/GA342
GRJ43/GRM43/GR343/GR443/GA243/GA343
GA352
GRJ21/GRM21/GR321/GR721
(TU1.25mm)
1.45
2.25
3.6
4.9
6.1
GRJ31/GRM31/GR331/GR731
(TU1.25mm)
2.0
2.9
6.1
GRJ55/GRM55/GR355/GR455/GA255/GA355
GRJ32/GRM32/GR332
*1 4.0 0.1mm in case of GRM42/GR442/GA242/GA342
*Nominal Value
3.6
(TU1.25mm)
*Nominal Value
(in mm)
w Paper Tape
8mm width, 4mm pitch Tape
4.0 0.1
Part Number
A*
B*
W0.1
Y0
1.1 max.
2.0 0.05
ø1.5
4.0 0.1
1.75 0.1
1.05
1.85
GRM18
GRJ21/GRM21/GR321/GR721
(T=1.0mm)
1.45
2.0
2.25
A
GRM31/GR331/GR731
(T=1.0mm)
3.6
GRM32
(T=1.0mm)
2.9
3.6
Direction of Feed
*Nominal Value
(in mm)
Continued on the following page.
186
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Package
Continued from the preceding page.
(3) Dimensions of Reel
13.0 1.0 (Tape width 8mm)
17.0 1.0 (Tape width 12mm)
2.0 0.5
ø13 0.2
ø21 0.8
9.0 +1.0 (Tape width 8mm)
-
0
0
13.0 +1.0 (Tape width 12mm)
-
(in mm)
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
Vacant section Chip mounting unit Vacant section
w Part of the leader and part of the empty tape should be
attached to the end of the tape as shown at right.
e The top tape or cover tape and base tape are not
attached at the end of the tape for a minimum of 5
pitches.
160 min.
190 min.
210 min.
(Top Tape or Cover Tape alone)
Direction of feed
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
(in mm)
t The top tape or cover tape and bottom tape should not
protrude beyond the edges of the tape and should not
cover sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
0.3mm.
u Peeling off force: 0.1 to 0.6N in the direction shown at
right.
Top Tape or Cover Tape
Base Tape
187
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
!Caution/Notice
Notice
!Caution
........................
....................................................................
c Storage and Operation Conditions
189
c Rating
195
195
195
.....................
1. Capacitance Change of Capacitor
2. Performance Check by Equipment
....................................................................
....................
c Rating
189
189
..............................................
1. Operating Voltage
........................................
2. Operating Temperature, Self-generated Heat,
and Load Reduction at High-frequency Voltage
Condition ........................................................... 189
c Soldering and Mounting
195
195
196
197
...........................
1. Construction of Board Pattern
..............................................
2. Mounting of Chips
.............................................................
3. Fail-safe
191
191
191
191
...........................................................
3. Soldering
.....
4. Test Condition for AC Withstanding Voltage
(1) Limit of losing effective area of the
terminations and conditions needed
............................................
(1) Test Equipment
...............................
(2) Voltage Applied Method
for soldering. ................................................ 197
............................................
(2) Flux Application
197
197
197
197
........................................
..........................................
........................................
...........................................................
c Soldering and Mounting
191
191
191
191
192
193
194
194
194
(3) Solder
4. Cleaning
............................................................
1. Vibration and Impact
....................................................
2. Circuit Board Material
5. Resin Coating
.................
3. Land Layout for Cropping PC Board
...............................................
4. Reflow Soldering
...................................................
5. Flow Soldering
........................
6. Correction with a Soldering Iron
.............................................................
7. Washing
8. Handling
............................................................
188
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
c Storage and Operation Conditions
Do not use or store capacitors in a corrosive
atmosphere, especially where chloride gas, sulfide
gas, acid, alkali, salt or the like are present. In
addition, avoid exposure to moisture. Before cleaning,
bonding or molding this product, verify that these
processes do not affect product quality by testing the
performance of a cleaned, bonded or molded product
in the intended equipment. Store the capacitors
where the temperature and relative humidity do not
exceed 5 to 40 degrees centigrade and 20 to 70%.
Use capacitors within 6 months of delivery.
Check the solderability after 6 months or more.
c Rating
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When DC-rated capacitors are to be used in input circuits
from a commercial power source (AC filter), be sure to
use Safety Certified Capacitors because various
regulations for withstanding voltage or impulses,
established for all equipment, should be taken into
consideration.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature, Self-generated Heat, and Load Reduction at High-frequency Voltage Condition
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency voltage, pulse voltage, it may self-generate
heat due to dielectric loss.
(1) In the case of X7R, X7T char.
Applied voltage should be the load such as self-
generated heat is within 20°C on the condition of
atmosphere temperature 25°C. When measuring, use a
thermocouple of small thermal capacity -K of ø0.1mm
in conditions where the capacitor is not affected by
radiant heat from other components or surrounding
ambient fluctuations. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
Continued on the following page.
189
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
(2) In case of C0G, U2J char.
Due to the low self-heating characteristics of
low-dissipation capacitors, the allowable electric power of
these capacitors is generally much higher than that of
X7R characteristic capacitors.
<C0G char., Rated Voltage: DC3.15kV>
The capacitors less than 22pF can be applied maximum
4.0kV peak to peak at 100kHz or less only for the ballast
or the resonance usage in the LCD backlight inverter
circuit.
When a high frequency voltage that causes 20°C self-
heating to the capacitor is applied, it will exceed the
capacitor's allowable electric power.
<Capacitor Selection Tool>
We are also offering free software/the capacitor selection
tool: "Murata Medium Voltage Capacitors Selection Tool
by Voltage Form," which will assist you in selecting a
suitable capacitor.
The frequency of the applied sine wave voltage should be
less than 500kHz (less than 100kHz in the case of rated
voltage: DC3.15kV). The applied voltage should be less
than the value shown in figure below.
The software can be downloaded from Murata's Website.
(http://www.murata.com/designlib/mmcsv/index.html).
By inputting capacitance values and the applied voltage
waveform of the specific capacitor series, this software
will calculate the capacitor's power consumption and list
suitable capacitors (non-sine wave is also available).
In the case of non-sine wave that includes a harmonic
frequency, please contact our sales representatives or
product engineers. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement with
the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
The temperature of the surface
of capacitor: 125˚C or less (including self-heating)
C0G char., Rated Voltage: DC250V
C0G char., Rated Voltage: DC630V
C0G char., Rated Voltage: DC1kV
1000
1000
10000
to 470pF
560pF
680pF
820pF
(630)
to 100pF
to 100pF
(1000)
100
1000pF
(250)
100
100
1
10
100
1000
1
10
100
1000
1
10
100
1000
Frequency [kHz]
Frequency [kHz]
Frequency [kHz]
C0G char., Rated Voltage: DC3.15kV
U2J char., Rated Voltage: DC250V
U2J char., Rated Voltage: DC630V
10000
1000
1000
to 680pF
1,000pF
2,200pF
4,700pF
10,000pF
22,000pF
47,000pF
to 22pF
27 to 47pF
to 4,700pF
100
(3150)
1000
(250)
100
10,000pF
10
1
10
100
1000
1
10
100 (500)1000
1
10
100
1000
Frequency [kHz]
Frequency [kHz]
Frequency [kHz]
U2J char., Rated Voltage: DC1kV
U2J char., Rated Voltage: DC2kV
U2J char., Rated Voltage: DC3.15kV
10000
10000
10000
1000
100
to 470pF
1,000pF
2,200pF
4,700pF
10,000pF
1000
100
to 100pF
150pF
220pF
to 33pF
47pF
100pF
(3150)
1000
10
1
10
100
1000
1
10
100
1000
1
10
100 (500)1000
Frequency [kHz]
Frequency [kHz]
Frequency [kHz]
The sine-wave frequency VS allowable voltage
Continued on the following page.
190
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
3. Fail-safe
Failure of a capacitor may result in a short circuit. Be sure
to provide an appropriate fail-safe function such as a fuse
on your product to help eliminate possible electric shock,
fire, or fumes.
FUSE
AC IN
Please consider using fuses on each AC line if the
capacitors are used between the AC input lines and earth
(line bypass capacitors), to prepare for the worst case,
such as a short circuit.
4. Test Condition for AC Withstanding Voltage
(1) Test Equipment
(2) Voltage Applied Method
Tests for AC withstanding voltage should be made with
equipment capable of creating a wave similar to a
50/60 Hz sine wave.
The capacitor's leads or terminals should be firmly
connected to the output of the withstanding voltage test
equipment, and then the voltage should be raised from
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
near zero to the test voltage. If the test voltage is applied
directly to the capacitor without raising it from near zero,
it should be applied with the zero cross.* At the end of the
test time, the test voltage should be reduced to near zero,
and then the capacitor's leads or terminals should be
taken off the output of the withstanding voltage test
equipment. If the test voltage is applied directly to the
capacitor without raising it from near zero, surge voltage
may occur and cause a defect.
*ZERO CROSS is the point where voltage sine wave
passes 0V.
Voltage sine wave
- See the figure at right -
0V
zero cross
Soldering and Mounting
1. Vibration and Impact
2. Circuit Board Material
Do not expose a capacitor to excessive shock or vibration
during use.
It is possible for the chip to crack by the expansion and
shrinkage of a metal board.
Please contact us if you want to use our ceramic
capacitors on a metal board such as Aluminum.
3. Land Layout for Cropping PC Board
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
[Component Direction]
[Chip Mounting Close to Board Separation Point]
C
Perforation
Locate chip
B
Chip arrangement
Worst AGCGB~D Best
horizontal to the
direction in which
stress acts.
D
A
Slit
<Example
<Example
to be avoided>
of improvement>
Continued on the following page.
191
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
4. Reflow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. In order to prevent mechanical
damage, preheating is required for both the components
and the PCB board. Preheating conditions are shown in
Table 1. It is required to keep the temperature differential
between the soldering and the components surface (ΔT)
as small as possible.
[Standard Conditions for Reflow Soldering]
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
ΔT
170°C
150°C
130°C
Preheating
Solderability of Tin plating termination chips might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chips before use.
Time
60-120 seconds 30-60 seconds
Vapor Reflow
Temperature (D)
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(ΔT) between the component and solvent within the
range shown in the Table 1.
Soldering
Peak Temperature
Gradual
Cooling
ΔT
170°C
150°C
130°C
Table 1
Preheating
Part Number
G--18/21/31
Temperature Differential
ΔTV190D
G--32/42/43/52/55
ΔTV130D
Time
20 seconds max.
60-120 seconds
Recommended Conditions
Pb-Sn Solder
Infrared Reflow Vapor Reflow
[Allowable Soldering Temperature and Time]
Lead Free Solder
Peak Temperature
Atmosphere
230-250°C
Air
230-240°C
Air
240-260°C
Air or N2
270
260
250
240
230
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
0
30
60
90
Soldering Time (sec.)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Optimum Solder Amount for Reflow Soldering
Overly thick application of solder paste results in
excessive solder fillet height.
[Optimum Solder Amount for Reflow Soldering]
This makes the chip more susceptible to mechanical and
thermal stress on the board and may cause cracked
chips.
0.2mm min.
Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in chips
breaking loose from the PCB.
in section
Make sure the solder has been applied smoothly to the
end surface to a height of 0.2mm min.
Inverting the PCB
Make sure not to impose an abnormal mechanical shock on
the PCB.
Continued on the following page.
192
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
5. Flow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. Additionally, an excessively long
soldering time or high soldering temperature results in
leaching by the outer electrodes, causing poor adhesion
or a reduction in capacitance value due to loss of contact
between electrodes and end termination.
[Standard Conditions for Flow Soldering]
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
ΔT
170°C
150°C
130°C
Preheating
In order to prevent mechanical damage, preheating is
required for both the components and the PCB board.
Preheating conditions are shown in Table 2. It is required
to keep temperature differential between the soldering
and the components surface (ΔT) as small as possible.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
between the component and solvent within the range
shown in Table 2.
Time
5 seconds max.
60-120 seconds
[Allowable Soldering Temperature and Time]
270
260
250
240
230
Do not apply flow soldering to chips not listed in Table 2.
Table 2
0
10
20
30
Soldering Time (sec.)
Part Number
Temperature Differential
ΔTV150D
G--18/21/31
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Recommended Conditions
Pb-Sn Solder
240-250°C
Air
Lead Free Solder
250-260°C
N2
Peak Temperature
Atmosphere
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Optimum Solder Amount for Flow Soldering
The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessively large, the risk of cracking is higher during
board bending or under any other stressful conditions.
Up to Chip Thickness
Adhesive
in section
Continued on the following page.
193
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
6. Correction with a Soldering Iron
When sudden heat is applied to the components by use
of a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change causes deformations inside the
components.
components and the PCB), should be within the
conditions of table 3.
It is required to keep the temperature differential between
the soldering Iron and the component's surface (ΔT) as
small as possible.
In order to prevent mechanical damage to the
components, preheating is required for both the
components and the PCB board.
After soldering, do not allow the component/PCB to cool
down rapidly.
The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, in turn causing a reduction of the
adhesive strength of the terminations.
Preheating conditions, (The "Temperature of the
Soldering Iron Tip", "Preheating Temperature,"
"Temperature Differential" between iron tip and the
Table 3
Temperature
of Soldering
Iron Tip
Temperature
Differential
(ΔT)
Preheating
Temperature
Part Number
Atmosphere
G--18/21/31
350°C max. 150°C min. ΔTV190D
air
air
G--32/42/43/
52/55
280°C max. 150°C min. ΔTV130D
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Optimum Solder Amount when re-working Using a
Soldering Iron
For sizes smaller than Gpp18, the top of the solder fillet
should be lower than 2/3 of the thickness of the
component or 0.5mm whichever is smaller.
For sizes larger than Gpp21, the top of the solder fillet
should be lower than 2/3 of the thickness of the
component.
Solder Amount
in section
If the solder amount is excessive, the risk of cracking is
higher during board bending or under any other stressful
conditions.
A Soldering iron ø3mm or smaller should be used.
It is also necessary to keep the soldering iron from
touching the components during the re-work.
Solder wire with ø0.5mm or smaller is required for
soldering.
7. Washing
Excessive output of ultrasonic oscillation during cleaning
causes PCBs to resonate, resulting in cracked chips or
broken solder. Take note not to vibrate PCBs.
8. Handling
Do not directly touch the chip capacitor, especially the
ceramic body. Residue from hands/fingers may create a
short circuit environment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
FUMING WHEN THE PRODUCT IS USED.
194
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
Rating
1. Capacitance Change of Capacitor
2. Performance Check by Equipment
(1) In the case of X7R, X7T char.
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might change
greatly depending on the surrounding temperature
or an applied voltage. Therefore, it is not likely
to be suitable for use in a time constant circuit.
Please contact us if you need detailed information.
(2) In the case of any char. except X7R, X7T
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this product
in a strict time constant circuit.
Generally speaking, CLASS 2 (X7R, X7T char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance. Therefore, the capacitance value may
change depending on the operating condition in the
equipment.
Accordingly, be sure to confirm the apparatus
performance of receiving influence in a capacitance
value change of a capacitor, such as leakage current
and noise suppression characteristics.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed the specific value by the
inductance of the circuit.
Soldering and Mounting
1. Construction of Board Pattern
After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
Construction and Dimensions of Pattern (Example)
Flow Soldering
Chip Capacitor
LgW
1.6g0.8
2.0g1.25
3.2g1.6
a
b
c
Solder Resist
0.6-1.0
1.0-1.2
2.2-2.6
0.8-0.9
0.9-1.0
1.0-1.1
0.6-0.8
0.8-1.1
1.0-1.4
c
L
W
Flow soldering: 3.2g1.6 or less available.
Land
b
a
Reflow Soldering
LgW
1.6g0.8
2.0g1.25
3.2g1.6
3.2g2.5
4.5g2.0
4.5g3.2
5.7g2.8
5.7g5.0
a
b
c
0.6-0.8
1.0-1.2
2.2-2.4
2.0-2.4
2.8-3.4
2.8-3.4
4.0-4.6
4.0-4.6
0.6-0.7
0.6-0.7
0.8-0.9
1.0-1.2
1.2-1.4
1.2-1.4
1.4-1.6
1.4-1.6
0.6-0.8
0.8-1.1
1.0-1.4
1.8-2.3
1.4-1.8
2.3-3.0
2.1-2.6
3.5-4.8
(in mm)
Continued on the following page.
195
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
Continued from the preceding page.
Dimensions of Slit (Example)
Chip Capacitor
Slit
Solder Resist
LgW
1.6g0.8
2.0g1.25
3.2g1.6
3.2g2.5
4.5g2.0
4.5g3.2
5.7g2.8
5.7g5.0
d
e
-
-
-
-
d
L
1.0-2.0
1.0-2.0
1.0-2.8
1.0-2.8
1.0-4.0
1.0-4.0
3.2-3.7
4.1-4.6
3.6-4.1
4.8-5.3
4.4-4.9
6.6-7.1
e
W
Land
Preparing the slit helps flux cleaning and resin
coating on the back of the capacitor.
However, the length of the slit design should
be as short as possible to prevent mechanical
damage in the capacitor.
(in mm)
A longer slit design might receive more severe
mechanical stress from the PCB.
Recommended slit design is shown in the
Table.
Land Layout to Prevent Excessive Solder
Mounting Close to a Chassis
Mounting with Leaded Components
Mounting Leaded Components Later
Soldering Iron
Lead Wire of
Component to be
Connected Later.
Lead Wire Connected
to a Part Provided
with Lead Wires.
d1
Chassis
Solder (Ground solder)
Examples
to Be Avoided
Adhesive
Base board
Land Pattern
in section
in section
in section
d2
Solder Resist
d1<d2
Solder Resist
Examples of
Improvements
by the Land
Division
Solder Resist
in section
in section
in section
2. Mounting of Chips
Thickness of adhesives applied
Keep thickness of adhesives applied (50-105μm or more)
to reinforce the adhesive contact considering the
thickness of the termination or capacitor (20-70μm) and
the land pattern (30-35μm).
Mechanical shock of the chip placer
When the positioning claws and pick-up nozzle are worn,
the load is applied to the chip while positioning is
concentrated in one position, thus causing cracks,
breakage, faulty positioning accuracy, etc.
Careful checking and maintenance are necessary to
prevent unexpected trouble.
An excessively low bottom dead point of the suction
nozzle imposes great force on the chip during mounting,
causing cracked chips. Please set the suction nozzle's
bottom dead point on the upper surface of the board.
Continued on the following page.
196
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
Continued from the preceding page.
3. Soldering
(1) Limit of losing effective area of the terminations and
conditions needed for soldering.
(2) Flux Application
An excessive amount of flux generates a large quantity of
flux gas, causing deteriorated solderability. So apply flux
thinly and evenly throughout. (A foaming system is
generally used for flow soldering.)
Depending on the conditions of the soldering
temperature and/or immersion (melting time),
effective areas may be lost in some parts of the
terminations.
To prevent this, be careful in soldering so that any
possible loss of the effective area on the terminations
will securely remain at a maximum of 25% on all
edge length A-B-C-D-A of part with A, B, C, D, shown
Flux containing too high a percentage of halide may
cause corrosion of the outer electrodes without sufficient
cleaning. Use flux with a halide content of 0.2% max.
Do not use strong acidic flux.
Do not use water-soluble flux.*
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
in the Figure below.
A
(3) Solder
B
The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
D
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
Termination
C
4. Cleaning
Please confirm there is no problem in the reliability of the
product beforehand when cleaning it with the intended
equipment.
The residue after cleaning it might cause a decrease in
the surface resistance of the chip and the corrosion of the
electrode part, etc. As a result it might cause reliability to
deteriorate. Please confirm beforehand that there is no
problem with the intended equipment in ultrasonic
cleansing.
5. Resin Coating
Please use it after confirming there is no influence on the
product with the intended equipment before the resin
coating and molding.
A cracked chip might be caused at the cooling/heating
cycle by the amount of resin spreading and/or bias
thickness.
The resin for coating and molding must be selected as
the stress is small when stiffening and the hygroscopic is
low as possible.
197
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
MEMO
198
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Metal Terminal Monolithic
Ceramic Capacitors
Contents
For General Purpose KRM/KR3 Series
High Capacitance for General Use
KRM Series
Specifications and Test Methods
Large Capacitance and High Allowable
Ripple Current Type KR3 Series
Specifications and Test Methods
p200
p201
p204
p205
Package
!Caution/Notice
p208
p210
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Metal Terminal Monolithic Ceramic Capacitors
Anti-
noise
Deflecting Soldering
High Capacitance for General Use KRM Series
crack
crack
Features
c
T
1. The product has high reliability against heat and
mechanical impact.
e
2. Stacking two capacitors reduces the mounting space and
achieves a large capacitance.
W
L
Dimensions (mm)
T
Part Number
3. The unique terminal structure greatly reduces noise from
the ceramics on the board.
L
W
e
KRM31F
3.5±±.3
3.5±±.3
3.6±±.3
3.7±±.3
1.7±±.ꢀ
1.7±±.ꢀ
1.7±±.ꢀ
1.85±±.ꢀ
1.9±±.1
ꢀ.7±±.ꢀ
ꢀ.7±±.ꢀ
ꢀ.7±±.ꢀ
ꢀ.8±±.ꢀ
3.7±±.ꢀ
ꢁ.8±±.ꢀ
6.ꢁ±±.3
±.8±±.ꢀ
KRM31K
KRM55L
KRM55Q
KRM55T
KRM55W
Applications
c
6.1±±.ꢁ
5.3±±.ꢀ
1.ꢀ±±.ꢀ
For smoothing and noise suppression of DC-DC converters
Do not use these products in any Automotive
Power train or Safety equipment incliding Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
appliations such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Metal Terminal
Width e (mm)
Part Number
Rated Voltage
Capacitance
max.
(mm)
KRM31FR61E106KH01K
KRM31KC81E106KH01K
KRM55LR71E156KH01K
KRM55QR71E226KH01K
KRM55TR71E336MH01K
KRM55WR71E476MH01K
KRM31KR71H225KH01K
KRM31KR71H475KH01K
KRM55LR71H475KH01K
KRM55QR71H106KH01K
KRM55WR71H226MH01K
KRM55LR71J475KH01K
KRM55QR71J106KH01K
KRM55WR71J226MH01K
KRM31KR72A105KH01K
KRM31KR72A225KH01K
KRM55LR72A475KH01K
KRM55QR72A685KH01K
KRM55TR72A106MH01K
KRM55WR72A156MH01K
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
63Vdc
63Vdc
63Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
X5R (EIA)
X6S (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
10µF 10ꢀ
10µF 10ꢀ
15µF 10ꢀ
22µF 10ꢀ
33µF 20ꢀ
47µF 20ꢀ
2.2µF 10ꢀ
4.7µF 10ꢀ
4.7µF 10ꢀ
10µF 10ꢀ
22µF 20ꢀ
4.7µF 10ꢀ
10µF 10ꢀ
22µF 20ꢀ
1.0µF 10ꢀ
2.2µF 10ꢀ
4.7µF 10ꢀ
6.8µF 10ꢀ
10µF 20ꢀ
15µF 20ꢀ
3.5
3.5
6.1
6.1
6.1
6.1
3.6
3.5
6.1
6.1
6.1
6.1
6.1
6.1
3.5
3.7
6.1
6.1
6.1
6.1
1.7
1.7
5.3
5.3
5.3
5.3
1.7
1.7
5.3
5.3
5.3
5.3
5.3
5.3
1.7
1.7
5.3
5.3
5.3
5.3
2
0.8 0.2mm
0.8 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
0.8 0.2mm
0.8 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
0.8 0.2mm
0.8 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
2.9
3
3.9
5
6.7
2.9
2.9
3
3.9
6.7
3
3.9
6.7
2.9
2.9
3
3.9
5
6.7
200
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
KRM Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
X5R Char.: ꢂ55 to +85°C
X6S Char.: ꢂ55 to +1±5°C
X7R Char.: ꢂ55 to +1ꢀ5°C
Test Method
Reference temperature: ꢀ5°C
Temperature Range
2
3
Appearance
Dimensions
No defects or abnormalities
Visual inspection
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 5±mA.
4
Dielectric Strength No defects or abnormalities
Rated Voltage
DCꢀ5V, DC5±V, DC63V
DC1±±V
Test Voltage
ꢀ5±% of the rated voltage
ꢀ±±% of the rated voltage
[KRM31]
W.V.: ꢀ5V
: More than 5±MΩ · μF
Insulation Resistance
W.V.: 5±V/1±±V
(I.R.)
The insulation resistance should be measured with Rated
Voltage and within 6±±5 sec. of charging.
5
6
: More than 5±±MΩ · μF
[KRM55]
More than 1±±MΩ · μF
Capacitance
Within the specified tolerance
The capacitance/D.F. should be measured at reference
temperature at the meaning frequency and voltage shown in
the table.
[KRM31]
W.V.: ꢀ5V
: ±.15 max.
W.V.: 5±V
: ±.±ꢀ5 max.
W.V.: 1±±V
: ±.±5 max.
[KRM55]
Nominal
Measuring
Measuring
Voltage
Dissipation
Factor (D.F.)
7
Capacitance Frequency
C>1±μF
CV1±μF
1ꢀ±±ꢀꢁ4H
1±±.ꢀk4H
AC±.5±±.1V(r.m.s.)
AC1.±±±.ꢀV(r.m.s.)
±.±ꢀ5 max.
The capacitance measurement should be made at each step
specified in the Table.
Step
Temperature (°C)
1
ꢀ
3
ꢁ
5
ꢀ5±ꢀ
Min. Operating Temp. ±3
ꢀ5±ꢀ
Max. Operating Temp. ±ꢀ
ꢀ5±ꢀ
Capacitance
Temperature
Characteristics
X5R Char.: Within ±15% (Temp. Range: ꢂ55 to +85°C)
X6S Char.: Within ±ꢀꢀ% (Temp. Range: ꢂ55 to +1±5°C)
X7R Char.: Within ±15% (Temp. Range: ꢂ55 to +1ꢀ5°C)
8
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 15±+±/–1±°C for 6±±5 min. and
then let sit for ꢀꢁ±ꢀ hrs. at room condition. (*1)
A static load of 1±N using a pressure rod should be applied to
the center in the direction of the arrow and held for 1± s.
Pressure Rod
Pressure
Strength of Metal
Terminal
R ±.5
9
Termination not to be broken or loosened
±.5L
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 1±N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free defects such as heat shock.
Adhesive Strength
of Termination
10
No removal of the terminations or other defect should occur.
1±N, 1±T1s
Glass Epoxy Board
Fig. 1
(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: ꢁ5 to 75%, Atmospheric pressure: 86 to 1±6kPa
Continued on the following page.
201
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
KRM Series Specifications and Test Methods
°ontinued from tꢁe preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢆiÌꢄ`
ꢂ««i>À>Vi No defects or abnormalities
ꢃ>«>VÌ>Vi Witꢁin tꢁe specified tolerance
Solder tꢁe capacitor to tꢁe test jig (glass epoxy board).
Tꢁe capacitor sꢁould be subjected to a simple ꢁarmonic motion
ꢁaving a total amplitude of 1.5mmꢂ tꢁe frequency being varied
uniformly between tꢁe approximate limits of 10 and 55Hz.
Tꢁe frequency rangeꢂ from 10 to 55Hz and return to 10Hzꢂ
sꢁould be traversed in approximately 1 min. Tꢁis motion sꢁould
be applied for a period of 2 ꢁrs. in eacꢁ of 3 mutually
perpendicular directions (total of 6 ꢁrs.).
6LÀ>ÌÊ
,iÃÃÌ>Vi
11
D.F.
In accordance witꢁ item No.7
Solder Resist
°u
Glass Epoxy Board
No marking defects
Solder tꢁe capacitor to tꢁe testing jig (glass epoxy board) sꢁown
in Fig. 2.
Tꢁen apply a force in tꢁe direction sꢁown in Fig. 3.
Tꢁe soldering sꢁould be done using tꢁe reflow metꢁod and
sꢁould be conducted witꢁ care so tꢁat tꢁe soldering is uniform
and free of defects sucꢁ as ꢁeat sꢁock.
b
ø4.5
d
c
50
20
12 ꢅiviVÌ
a
speed: 1.0mm/s
Pressurize
t : 1.6
100
R4
(in mm)
ꢅiÃÊ®
Flexure: V5
/Þ«i
>
2.2
4.5
L
V
`
1.0
1.0
°apacitance meter
KRM31
KRM55
5.0
8.0
1.65
5.6
45
45
(in mm)
Fig. 2
Fig. 3
Reflow Soldering: Peak 260+0/-5ꢀ°
Tꢁe area of soldering 230ꢀ° min.ꢂ 20 to 40 s
Let sit for 24 2 ꢁ at room conditionꢂ, tꢁen measure.
U*ÀiÌÀi>ÌiÌ
Perform tꢁe ꢁeat treatment at 150+0/-10ꢀ° for 60 5 min. and
tꢁen let sit for 24 2 ꢁ at room condition. (,1)
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
300ꢀ°
260+0/-5ꢀ°
13
Tꢁe metal surface is soldered well
20 to 40 s
230ꢀ° min.
200ꢀ°
180ꢀ°
150ꢀ°
60 to 120 s
100ꢀ°
ꢂ««i>À>Vi No marking defects
UꢀÊV>ÃiÊvÊ,ivÜÊ-`iÀ}
See item 13 Solderability of termination
UꢀÊV>ÃiÊvÊ-`iÀ}ÊꢀÀ
ꢃ>«>VÌ>ViÊ
ꢃꢄ>}i
Witꢁin 10ꢃ
,iÃÃÌ>ViÊ
14 ÌÊ-`iÀ}Ê
Temp. of solder: 350 10ꢀ°
Solder time: 4+1/-0 s
Let sit for 24 2 ꢁrs.at room conditionꢂ, tꢁen measure
Please refer to "°aution (Soldering and Mounting) °orrection
witꢁ a Soldering Iron"
D.F.
In accordance witꢁ item No.7
In accordance witꢁ item No.5
ꢁi>Ì
ꢀ°,°
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance witꢁ item No.4
(,1) "Room condition" Temperature: 15 to 35ꢀ°ꢂ Relative ꢁumidity: 45 to 75ꢃꢂ Atmospꢁeric pressure: 86 to 106kPa
°ontinued on tꢁe following page.
202
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
KRM Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢆiÌꢄ`
ꢂ««i>À>Vi No marking defects
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 100 cycles according to the 4 heat treatments listed
in the following table.
ꢃ>«>VÌ>ViÊ
ꢃꢄ>}i
Within 7.5%
D.F.
I.R.
In accordance with item No.7
In accordance with item No.5
Let sit for ꢀ4 ꢀ hrs. at room condition,* then measure.
-Ìi«
/i«iÀ>ÌÕÀiÊcꢃ®
Min. Operating Temp.
Room Temp.
/iÊ°®
30 3
ꢀ to 3
1
ꢀ
3
4
3
Max. Operating Temp.
Room Temp.
ꢀ
30 3
ꢀ to 3
/i«iÀ>ÌÕÀiÊ
ꢃÞVi
15
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150+0/-10°C for 60 5 min. and
then let sit for ꢀ4 ꢀ hrs. at room condition. (*1)
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance with item No.4
Solder Resist
Cu
Glass Epoxy Board
Fig. 4
ꢂ««i>À>Vi No marking defects
ꢃ>«>VÌ>ViÊ
Within 15%
ꢃꢄ>}i
[KRM31]
W.V.: ꢀ5V
: 0.ꢀ max.
D.F.
W.V.: 50V/100V
: 0.05 max.
[KRM55]
Let the capacitor sit at 40 ꢀ°C and relative humidity of ꢁ0 to ꢁ5%
for 500+ꢀ4/-0 hrs.
Remove and let sit for ꢀ4 ꢀ hrs. at room condition,* then
measure.
ꢁÕ`ÌÞÊ
16 -Ìi>`ÞÊ
0.05 max.
-Ì>Ìi®
U*ÀiÌÀi>ÌiÌ
[KRM31]
W.V.: ꢀ5V
: More than 1ꢀ.5MΩ · μF
W.V.: 50V/100V
: More than 50MΩ · μF
Perform a heat treatment at 150+0/-10°C for 60 5 min. and
then let sit for ꢀ4 ꢀ hrs. at room condition. (*1)
I.R.
[KRM55]
More than 10MΩ · μF
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance with item No.4
ꢂ««i>À>Vi No marking defects
ꢃ>«>VÌ>ViÊ
Within 15%
ꢃꢄ>}i
[KRM31]
W.V.: ꢀ5V
: 0.ꢀ max.
Apply voltage as in the Table for 1000+48/-0 hrs. at maximum
operating temperature 3°C. Remove and let sit for ꢀ4 ꢀ hrs.
at room condition, (*1) then measure.
D.F.
W.V.: 50V/100V
: 0.05 max.
[KRM55]
,>Ìi`Ê6Ì>}i
DCꢀ5V, DC50V
DC63V, DC100V
ꢂ««i`Ê6Ì>}i
ꢀ00% of the rated voltage (*ꢀ)
150% of the rated voltage
0.05 max.
17 ꢇvi
The charge/discharge current is than 50mA.
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150+0/-10°C for 60 5 min. and
then let sit for ꢀ4 ꢀ hrs. at room condition. (*1)
[KRM31]
W.V.: ꢀ5V
: More than ꢀ5MΩ · μF
W.V.: 50V/100V
: More than 50MΩ · μF
[KRM55]
More than 10MΩ · μF
I.R.
(*ꢀ) KRM31KC81E106, KRM31FR61E106, KRM31KR71Hꢀꢀ5,
KRM31KR71H475, KRM31KR7ꢀA105
: 150% of the rated voltage
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance with item No.4
(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
203
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Metal Terminal Monolithic Ceramic Capacitors
Anti-
noise
Deflecting Soldering
Large Capacitance and High Allowable Ripple Current KR3 Series
crack
crack
Features
c
T
1. The product has high reliability against heat and
mechanical impact.
e
2. Stacking two capacitors reduces the mounting space and
achieves a large capacitance.
W
L
3. The unique terminal structure greatly reduces noise from
the ceramics on the board.
Dimensions (mm)
T
Part Number
L
W
e
KR355L
KR355Q
KR355T
KR355W
2.8±±.2
3.7±±.2
ꢀ.8±±.2
6.ꢀ±±.3
4. This series can provide higher capacitance value under
DC-Bias condition, compare with previous X7R char.
5. Improve the performance of ripple-resistance compared
with X7R char.
6.1±±.ꢀ
5.3±±.2
1.2±±.2
Applications
c
1. DC smoothing & EMI filiter for LED Lighting.
2. For PFC circuit in the swiching power supplies,
AC adaptor.
3. DC-DC converter for general electronic equipment.
Do not use these products in any Automotive
Power train or Safety equipment incliding Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
appliations such as Power train and Safety equipment.
Thickness T
TC Code
(Standard)
Length L
(mm)
Width W
(mm)
Metal Terminal
Width e (mm)
Part Number
Rated Voltage
Capacitance
max.
(mm)
KR355LD72E474KH01K
KR355QD72E105KH01K
KR355WD72E225MH01K
KR355LD72W224KH01K
KR355LD72W474KH01K
KR355QD72W564KH01K
KR355TD72W105MH01K
KR355WD72W125MH01K
KR355LD72J104KH01K
KR355LD72J154KH01K
KR355QD72J224KH01K
KR355QD72J274KH01K
KR355WD72J474MH01K
KR355WD72J564MH01K
250Vdc
250Vdc
250Vdc
450Vdc
450Vdc
450Vdc
450Vdc
450Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
630Vdc
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
X7T (EIA)
0.47µF 10ꢀ
1.0µF 10ꢀ
2.2µF 20ꢀ
0.22µF 10ꢀ
0.47µF 10ꢀ
0.56µF 10ꢀ
1.0µF 20ꢀ
1.2µF 20ꢀ
0.1µF 10ꢀ
0.15µF 10ꢀ
0.22µF 10ꢀ
0.27µF 10ꢀ
0.47µF 20ꢀ
0.56µF 20ꢀ
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
3
3.9
6.7
3
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
1.2 0.2mm
3
3.9
5
6.7
3
3
3.9
3.9
6.7
6.7
204
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
KR3 Series Specifications and Test Methods
No.
1
Item
Operating
Specifications
Test Method
Reference temperature: 25°C
-55 to +125°C
Temperature Range
2
3
Appearance
No defects or adnormalities
Visual inspection
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 5±mA.
4
Dielectric Strength No defects or abnormalities
Rated Voltage
DC25±V
DCꢀ5±V
Test Voltage
2±±% of the rated voltage
15±% of the rated voltage
12±% of the rated voltage
DC63±V
The inslation resisitance should be measured with
DC5±±V±5±V (DC25±V±25V in case of rated Voltage:
DC25±V, DCꢀ5±V) and within 6±±5 sec. of charging.
Insulation Resistance
(I.R.)
5
More than 1±,±±±MΩ or 1±±Ω · μF (Whichever is Smaller)
6
7
Capacitance
Within the specified tolerance
±.±1 max.
The capacitance/D.F. should be measured at a frequency of
1±±.2kHz and a voltage of AC1±±.2V (r.m.s.).
Dissipation
Factor (D.F.)
The capacitance measurement should be made at each step
specified in the table.
Step
Temperature (°C)
1
2
3
ꢀ
5
25±2
Min. Operating Temp. ±3
25±2
Max. Operating Temp. ±2
25±2
Capacitance
Temperature
Characteristics
Cap. Change
Within +22/-33%
(Temp. Range: -55 to +125°C)
8
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 15±+±/-1±°C for 6±±5 min. and
then let sit for 2ꢀ±2 hrs. at room condition.*
A static load of 1±N using a pressure rod should be applied to
the center in the direction of the arrow and held for 1± sec.
Pressure Rod
Pressure
Strength of Metal
Terminal
R ±.5
9
Termination not to be broken or loosened
±.5L
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 1±N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free defects such as heat shock.
Adhesive Strength
of Termination
10
No removal of the terminations or other defect should occur.
1±N, 1±T1s
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 1± and 55Hz.
The frequency range, from 1± to 55Hz and return to 1±Hz,
should be traversed in approximately 1 min. This motion should
be applied for a period of 2 hrs. in each of 3 mutually
perpendicular directions (total of 6 hrs.).
Vibration
Resistance
11
D.F.
In accordance with item No.7
Solder
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: ꢀ5 to 75%, Atmospheric pressure: 86 to 1±6kPa
Continued on the following page.
205
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
KR3 Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢆiÌꢄ`
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
50
20
c
12 ꢅiviVÌ
speed: 1.0mm/s
Pressurize
a
R4
t : 1.6
100
(in mm)
Flexure: V5
ꢅiÃÊ®
/Þ«i
Capacitance meter
>
4.5
L
c
`
1.0
45
45
KR355
8.0
5.6
(in mm)
Fig. 2
Fig. 3
Reflow Soldering: Peak 260+0/-5°C
The area of soldering 230°C min.* 20 to 40 sec.
Let sit for 24±2 hrs. at room conditionꢀ* then measure.
U*ÀiÌÀi>ÌiÌ
Perform the heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition.ꢀ
-`iÀ>LÌÞÊvÊ
/iÀ>Ì
300°C
260+0/-5°C
13
The metal surface is soldered well.
20 to 40 s
230°C min.
200°C
180°C
150°C
60 to 120 s
100°C
ꢂ««i>À>Vi No marking defects
UꢀÊV>ÃiÊvÊ,ivÜÊ-`iÀ}
See item 13 Solderability of Termination
UꢀÊV>ÃiÊvÊ-`iÀ}ÊꢀÀ
ꢃ>«>VÌ>ViÊ
ꢃꢄ>}i
Within ±10ꢁ
,iÃÃÌ>ViÊ
14 ÌÊ-`iÀ}Ê
Temp. of solder: 350±10°C
Solder time: 4+1/-0 sec.
Let sit for 24±2 hrs.at room condition*ꢀ then measure.
Please refer to "Caution (Soldering and Mounting) Correction
with a Soldering Iron".
D.F.
I.R.
In accordance with item No.±
In accordance with item No.5
ꢁi>Ì
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance with item No.4
ꢂ««i>À>Vi No marking defects
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 100 cycles according to the 4 heat treatments listed
in the following table.
ꢃ>«>VÌ>ViÊ
Within ±±.5ꢁ
ꢃꢄ>}i
D.F.
I.R.
In accordance with item No.±
In accordance with item No.5
Let sit for 24±2 hrs. at room conditionꢀ* then measure.
-Ìi«
/i«iÀ>ÌÕÀiÊcꢃ®
Min. Operating Temp. ±3
Room Temp.
/iÊ°®
30±3
2 to 3
1
2
3
4
Min. Operating Temp. ±2
Room Temp.
30±3
2 to 3
/i«iÀ>ÌÕÀiÊ
ꢃÞVi
15
U*ÀiÌÀi>ÌiÌ
Perform a heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition.ꢀ
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance with item No.4
Solder
Cu
Glass Epoxy Board
Fig. 4
ꢀ "Room condition" Temperature: 15 to 35°C* Relative humidity: 45 to ±5ꢁ* Atmospheric pressure: 86 to 106kPa
Continued on the following page.
206
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
KR3 Series Specifications and Test Methods
Continued from the preceding page.
°
ꢀÌi
-«iVvV>ÌÃ
/iÃÌÊꢆiÌꢄ`
ꢂ««i>À>Vi No marking defects
Let the capacitor sit at 40 ꢀ°C and relative humidity of ꢁ0 to ꢁ5%
for 500+ꢀ4/-0 hrs.
Remove and let sit for ꢀ4 ꢀ hrs. at room condition*, then
measure.
ꢃ>«>VÌ>ViÊ
ꢃꢄ>}i
Within 1ꢀ.5%
0.0ꢀ max.
ꢁÕ`ÌÞÊ
16 -Ìi>`ÞÊ
D.F.
I.R.
-Ì>Ìi®
U*ÀiÌÀi>ÌiÌ
More than 1,000MΩ or 10MΩ · μF (Whichever is smaller)
Perform a heat treatment at 150+0/-10°C for 60 5 min. and
then let sit for ꢀ4 ꢀ hrs. at room condition.*
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance with item No.4
ꢂ««i>À>Vi No marking defects
Apply voltage as in the Table for 1000+48/-0 hrs. at maximum
operating temperature 3°C. Remove and let sit for ꢀ4 ꢀ hrs.
at room condition,* then measure.
ꢃ>«>VÌ>ViÊ
Within 1ꢀ.5%
ꢃꢄ>}i
,>Ìi`Ê6Ì>}i
DCꢀ50V
DC450V
ꢂ««i`Ê6Ì>}i
D.F.
I.R.
0.0ꢀ max.
150% of the rated voltage
130% of the rated voltage
1ꢀ0% of the rated voltage
17 ꢇvi
More than 1,000MΩ or 10MΩ · μF (Whichever is smaller)
DC630V
The charge/discharge current is than 50mA.
U*ÀiÌÀi>ÌiÌ
Apply test voltage for 60 5min. at test temperature.
Remove and let sit for ꢀ4 ꢀ hrs, at room condition.*
ꢅiiVÌÀVÊ
-ÌÀi}Ìꢄ
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
207
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Package
Taping is standard packaging method.
c Minimum Quantity Guide
Dimensions (mm)
Quantity (pcs.)
ø330mm Reel
4,000
Part Number
L
W
T
Kpp31K
Kpp31F
3.5
3.5
6.1
6.1
6.1
6.1
1.7
1.7
5.3
5.3
5.3
5.3
2.7
1.9
2.8
3.7
4.8
6.4
5,000
Kpp55L
2,000
Kpp55Q
1,000
Kpp55T
1,000
Kpp55W
500
ø180mm reel is also available.
c Tape Carrier Packaging
(1) Appearance of Taping
Embossed Tape
(2) Dimensions of Tape
Embossed Tape
12mm width 4mm pitch Tape
+0.1
–0
Cover Tape: 0.06mm in thickness
ø1.5
2.0 0.05
4.0 0.1 4.0 0.1
0.3 0.1
1.75 0.1
Sprocket Hole: As specified in (2)
Cavity for Chip: As specified in (2)
A
Base Tape: As specified in (2)
Direction of Feed
C max.
Part Number
Kpp31K
A*
2.2
2.2
B*
C
4.1
4.1
4.1
2.8
Packed Capacitors
Capacitor
Kpp31F
*Nominal Value
12mm width 8mm pitch Tape
16mm width 12mm pitch Tape
+0.1
+0.1
ø1.5
ø1.5
–0
–0
8.0 0.1
2.0 0.05
4.0 0.1
12.0 0.1
2.0 0.1
0.4 0.1
0.4 0.1
1.75 0.1
1.75 0.1
4.0 0.1
A
A
Direction of Feed
Direction of Feed
C max.
C max.
Part Number
Kpp55L
A*
B*
C
Part Number
A*
B*
6.7
C
7.4
5.5
5.5
5.5
6.4
6.4
6.4
4.1
5.7
Kpp55W
5.8
5.8
*Nominal Value
Kpp55Q
Kpp55T
*Nominal Value
(in mm)
Continued on the following page.
208
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Package
Continued from the preceding page.
(3) Dimensions of Reel
17.ꢀ 1.ꢀ (ꢁape ꢂidth 12mm)
21.ꢀ 1.0 (ꢁape ꢂidth 1ꢃmm)
2.0 0.ꢀ
ø13 0.2
ø21 0.ꢄ
13.ꢀ 1.0 (ꢁape ꢂidth 12mm)
17.ꢀ 1.0 (ꢁape ꢂidth 1ꢃmm)
(in mm)
(4) ꢁaping Method
q ꢁapes for capacitors are ꢂound clockꢂise. ꢁhe
sprocket holes are to the right as the tape is pulled
toꢂard the user.
Capacitors
mounting unit
Vacant section
Vacant section
w Part of the leader and part of the empty tape should be
attached to the end of the tape as shoꢂn at right.
e ꢁhe top tape or cover tape and base tape are not
attached at the end of the tape for a minimum of ꢀ
pitches.
1ꢃ0 min.
190 min.
210 min.
(ꢁop ꢁape or Cover ꢁape alone)
Direction of Feed
r Missing capacitors number ꢂithin 0.1% of the number
per reel or 1 pc, ꢂhichever is greater, and are not
continuous.
(in mm)
t ꢁhe top tape or cover tape and bottom tape should not
protrude beyond the edges of the tape and should not
cover sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
0.3mm.
u Peeling off force: 0.1 to 0.ꢃN in the direction shoꢂn at
right.
ꢁop ꢁape or Cover ꢁape
Base ꢁape
209
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
!Caution/Notice
Notice
!Caution
........................
....................................................................
c Storage and Operation Conditions
211
c Rating
214
214
214
.....................
....................
1. Capacitance Change of Capacitor
....................................................................
c Rating
211
211
2. Performance Check by Equipment
..............................................
1. Operating Voltage
........................................
2. Operating Temperature
and Self-generated Heat
c Soldering and Mounting
214
214
214
214
214
214
...................................
211
211
...........................
1. Construction of Board Pattern
.............................................................
3. Fail-safe
..............................................
2. Mounting of Chips
...........................................................
3. Soldering
........................................
..........................................
c Soldering and Mounting
212
212
212
212
213
213
............................................................
4. Cleaning
1. Vibration and Impact
....................................................
5. Resin Coating
.................
2. Land Layout for Cropping PC Board
...............................................
3. Reflow Soldering
...................................................
4. Flow Soldering
........................
5. Correction with a Soldering Iron
210
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
c Storage and Operation Conditions
Do not use or store capacitors in a corrosive
atmosphere, especially where chloride gas, sulfide
gas, acid, alkali, salt or the like are present. In
addition, avoid exposure to moisture. Before cleaning,
bonding or molding this product, verify that these
processes do not affect product quality by testing the
performance of a cleaned, bonded or molded product
in the intended equipment. Store the capacitors
where the temperature and relative humidity do not
exceed 5 to 40 degrees centigrade and 20 to 70%.
Use capacitors within 6 months of delivery.
Check the solderability after 6 months or more.
c Rating
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When DC-rated capacitors are to be used in input circuits
from a commercial power source (AC filter), be sure to
use Safety Certified Capacitors because various
regulations for withstanding voltage or impulses,
established for all equipment, should be taken into
consideration.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
Voltage
DC Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage (1)
Pulse Voltage (2)
Positional
Measurement
V0-p
V0-p
Vp-p
Vp-p
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency voltage, pulse voltage, it may self-generate
heat due to dielectric loss.
Applied voltage should be the load such as self-
generated heat is within 20°C on the condition of
atmosphere temperature 25°C. When measuring, use a
thermocouple of small thermal capacity -K of ø0.1mm
in conditions where the capacitor is not affected by
radiant heat from other components or surrounding
ambient fluctuations. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
3. Fail-safe
Failure of a capacitor may result in a short circuit. Be sure
to provide an appropriate fail-safe function such as a fuse
on your product to help eliminate possible electric shock,
fire, or fumes.
Continued on the following page.
211
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
Soldering and Mounting
1. Vibration and Impact
Do not expose a capacitor to excessive shock or vibration
during use.
Do not directly touch the capacitor, especially the ceramic
body. Residue from hands/fingers may create a short
circuit environment.
2. Land Layout for Cropping PC Board
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
[Component Direction]
[Chip Mounting Close to Board Separation Point]
C
Perforation
Locate chip
B
Chip arrangement
Worst AGCGB~D Best
horizontal to the
direction in which
stress acts.
D
A
Slit
<Example
<Example
to be avoided>
of improvement>
3. Reflow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. In order to prevent mechanical
damage, preheating is required for both the components
and the PCB board. Preheating conditions are shown in
Table 1. It is required to keep the temperature differential
between the soldering and the components surface (ΔT)
as small as possible.
[Standard Conditions for Reflow Soldering]
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
ΔT
170°C
150°C
130°C
Preheating
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(ΔT) between the component and solvent within the
range shown in the Table 1.
Time
60-120 seconds 30-60 seconds
Vapor Reflow
Temperature (D)
Table 1
Soldering
Part Number
Temperature Differential
ΔTV190D
Peak Temperature
Gradual
Cooling
K--31
K--55
ΔT
170°C
ΔTV130D
150°C
130°C
Recommended Conditions
Preheating
Pb-Sn Solder
Infrared Reflow Vapor Reflow
Lead Free Solder
Peak Temperature
Atmosphere
230-250°C
Air
230-240°C
Air
240-260°C
Air or N2
Time
60-120 seconds
20 seconds max.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Continued on the following page.
212
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Caution
!
Continued from the preceding page.
Optimum Solder Amount for Reflow Soldering
If solder paste is excessive, solder between a chip and a
metal terminal melts. This causes the chip to move and
come off.
[Optimum Solder Amount for Reflow Soldering]
If solder paste is too little, it causes a lack of adhesive
strength on the metal terminal and the capacitor comes
off.
Please make sure that solder is smoothly applied higher
than 0.3mm and lower than the level of the bottom of the
chip.
in section
Inverting the PCB
Make sure not to impose an abnormal mechanical shock on
the PCB.
4. Flow Soldering
Do not apply flow soldering.
5. Correction with a Soldering Iron
Please refer to the figure of a soldering iron on the right.
Please use thread solder which is smaller than 0.5mm in
diameter.
17
26
R0.5
A soldering iron must be touched the bottom of metal
terminal.
(in mm)
Soldering Iron
Temperature of iron chip: 350°C max./5s max./60W max.
*1) Do not touch ceramic, or it causes cracks because of
sudden heat.
*2) Do not touch the connection between a chip and a
metal and the outside of that area, or it causes the
chip to move and come off.
Electrode Land
Please only touch the metal terminal.
Do not touch the chip.
Thread Solder
Optimum Solder Amount when re-working Using a Solder
Iron.
[Optimum Solder Amount when Re-working Using
a Solder Iron]
The top of the solder fillet should be lower than the level
of the bottom of the chip.
in section
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
CAUSE FUMING OR PARTIAL DISPERSION WHEN THE
PRODUCT IS USED.
213
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Notice
c Rating
1. Capacitance Change of Capacitor
Generally speaking, CLASS 2 ceramic capacitors have
voltage dependence characteristics and temperature
dependence characteristics in capacitance.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its capacitance
slightly if the capacitor is left on for a long time.
Moreover, capacitance might change greatly depending
on the surrounding temperature or an applied voltage.
Therefore, it is not likely to be suitable for use in a time
constant circuit.
Therefore, the capacitance value may change depending
on the operating condition in the equipment.
Accordingly, be sure to confirm the apparatus
performance of receiving influence in a capacitance
value change of a capacitor, such as leakage current
and noise suppression characteristics.
Please contact us if you need detailed information.
2. Performance Check by Equipment
Moreover, check the surge-proof ability of a capacitor in
the equipment, if needed, because the surge voltage may
exceed the specific value by the inductance of the circuit.
Before using a capacitor, check that there is no problem
in the equipment's performance and the specifications.
c Soldering and Mounting
1. Construction of Board Pattern
If solder is excessively applied to the circuit board,
mechanical stress will cause destruction resistance
characteristics to lower. To prevent this, be extremely
careful in determining shape and dimension before
designing the circuit board diagram.
Construction and Dimensions of Pattern (Example)
Chip Capacitor
Solder Resist
c
Land
b
a
Part Number
Kpp31
a
b
c
1.6
2.6
1.8
2.7
1.9
Kpp55
5.6
(in mm)
2. Mounting of Chips
Mechanical shock of the chip placer
3. Soldering
Flux Application
When the positioning claws and pick-up nozzle are worn,
the load is applied to the chip while positioning is
concentrated in one position, thus causing cracks,
breakage, faulty positioning accuracy, etc.
Careful checking and maintenance are necessary to
prevent unexpected trouble.
Do not use strong acidic flux.
Do not use water-soluble flux.*
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
An excessively low bottom dead point of the suction
nozzle imposes great force on the chip during mounting,
causing cracked chips and the metal to bend. Please set
the suction nozzle's bottom dead point on the upper
surface of the board.
4. Cleaning
5. Resin Coating
Please confirm there is no problem in the reliability of the
product beforehand when cleaning it with the intended
equipment.
Please use it after confirming there is no influence on the
product with the intended equipment before the resin
coating and molding.
The residue after cleaning it might cause a decrease in
the surface resistance of the chip and the corrosion of the
electrode part, etc. As a result it might cause reliability to
deteriorate. Please confirm beforehand that there is no
problem with the intended equipment in ultrasonic
cleansing.
A cracked chip might be caused at the cooling/heating
cycle by the amount of resin spreading and/or bias
thickness.
The resin for coating and molding must be selected as
the stress is small when stiffening and the hygroscopic is
low as possible.
214
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
ISO 9001 Certifications
c Qualified Standards
The products listed here have been produced by ISO 9001
certified factory.
Plant
Fukui Murata Mfg. Co., Ltd.
Izumo Murata Mfg. Co., Ltd.
Okayama Murata Mfg. Co., Ltd.
Murata Electronics Singapore (Pte.) Ltd.
Beijing Murata Electronics Co., Ltd.
Wuxi Murata Electronics Co., Ltd.
215
• Please read rating and !
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
C02E.pdf
Oct.1,2012
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
216
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Please check Murata’s newsletter!
You can learn about electric parts with fun.
http://www.murata.com/products/emicon_fun/
EMICON-FUN! disseminated widely from basics (principles, characteristics, mounting, etc.) of capacitors, inductors and EMI suppression filters
to information can practically be used.
Updated information is also distributed via the mail magazine.
This banner is
You can register from the Products page on Murata Manufacturing website.
the entrance of
http://www.murata.com/products/
register form
217
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
!Note
C02E.pdf
Oct.1,2012
C02E.pdf
Oct.1,2012
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Convenient Search
The type of searches has been increased to respond to various ways of searching.
The products you are searching for can easily be found from about 40,000 part numbers!
The frequency of revisions and discontinuance has been increased to provide the latest information at all times!
Capacitor Website Introduction
The website and search engine of ceramic capacitors has been drastically renewed.
s
( )
Reference drawings Specifications and Test Methods can be downloaded in PDF format.
Substantial
Technical
Information
s
(
Graphs of the electrical characteristic data Capacitance - Temperature characteristics / DC bias characteristics /
)
AC voltage characteristics / Frequency characteristics can be displayed.
capacitor murata
http://www.murata.com/products/capacitor/
s
Reliability test data can be downloaded.
Examples of Problem Solving
Contents for Solving customers' problems. Introducing the recommended
Industry Pickup
Advantages of Murata Capacitors
3
1
2
We explain the unique benefits of
Murata capacitors, our matchless
quality, track record in the market,
supply systems and development
capability.
s
(
)
Examples of Replacement Video
series and the latest information
on Murata for each industry.
s
s
Proposal for Cost Reductions
Examples of Noise
s
Automobile
Smart Phones
s
(
)
Countermeasures Video
You can contact us and download catalogs from here.
Search by features
Search in the lineups
Products can be searched
by entire product lineup.
Search by specifications
Products can be searched by capacitance,
rated voltage or temperature characteristics.
1
4
2
5
3
Products can be searched by problems,
shapes or mounting methods.
2
1
1
5
3
4
Cross reference search
Equivalent products of Murata can be
searched by competitors' part numbers.
Search by part number
Products can be searched
by Murata's part numbers.
SimSurfing
2
This is a web application to display characteristics charts of
Murata products, and download the characteristics data.
s
S parameter
s
s
(
)
SPICE Model
Netlist
Data Libraries
(
)
r
for Agilent ADS, for AWR Microwave Office
(
)
Frequently Asked Questions FAQ
This is a collection of questions asked by customers.
The contents of problems can easily be searched by keywords with
this search function.
3
Characteristics Data
(
Dimensions / Capacitance - Temperature Characteristics /
DC Bias Characteristics / AC Voltage / Frequency Characteristics /
Heat Generation by Ripple Currents, etc.
)
Reliability Test Data
Initial Characteristics / Board Bending Resistance /
Humidity Resistance / High Temperature Load / Solderability, etc.
Safety Certificates by Series
List of ISO14001 Certified Plants
218
219
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Cat. No. C02E-17
相关型号:
©2020 ICPDF网 联系我们和版权申明