GRM31BR73A102KW01L [MURATA]
Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT;型号: | GRM31BR73A102KW01L |
厂家: | muRata |
描述: | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT 电容器 |
文件: | 总4页 (文件大小:83K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
Chip Monolithic Ceramic Capacitors
Medium-voltage High-Capacitance for General-Use
e
g
L
e
■ Features
1. A new monolithic structure for small, high
capacitance capable of operating at high voltage
W
Dimensions (mm)
T
Part Number
levels.
L
W
e
g min.
0.4
GRM188
GRM21A
GRM21B
GRM31B
GRM31C
GRM32Q
GRM32D
GRM43Q
GRM43D
GRM55D
1.6 ±0.1 0.8 ±0.1
0.8 ±0.1
1.0 +0,-0.3
1.25 ±0.2
1.25 +0,-0.3
1.6 ±0.2
1.5 +0,-0.3 0.3 min.
2.0 +0,-0.3
0.2 to 0.5
2. Sn-plated external electrodes realized good
solderability.
2.0 ±0.2 1.25 ±0.2
0.7
3.2 ±0.2 1.6 ±0.2
3.2 ±0.3 2.5 ±0.2
4.5 ±0.4 3.2 ±0.3
3. Use the GRM18/21/31 types with flow or reflow
soldering, and other types with reflow soldering
only.
1.2
1.5 +0,-0.3
2.0 +0,-0.3
2.2
5.7 ±0.4 5.0 ±0.4 2.0 +0,-0.3
3.2*
* GRM55DR73A : 2.5mm min.
■ Applications
1. Ideal for use as a hot-cold coupling for DC/DC
converter.
2. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
3. Ideal for use on diode-snubber circuits for
switching power supplies.
Electrode g
min.
Rated Voltage
(V)
TC Code
(Standard)
Length L Width W Thickness T
Electrode e
(mm)
Part Number
Capacitance
(mm)
(mm)
(mm)
(mm)
GRM188R72E221KW07D
GRM188R72E331KW07D
GRM188R72E471KW07D
GRM188R72E681KW07D
GRM188R72E102KW07D
GRM21AR72E102KW01D
GRM188R72E152KW07D
GRM21AR72E152KW01D
GRM188R72E222KW07D
GRM21AR72E222KW01D
GRM21AR72E332KW01D
GRM21AR72E472KW01D
GRM21AR72E682KW01D
GRM21BR72E103KW03L
GRM31BR72E153KW01L
GRM31BR72E223KW01L
GRM31CR72E333KW03L
GRM31CR72E473KW03L
GRM32QR72E683KW01L
GRM31CR72E104KW03L
GRM32DR72E104KW01L
GRM43QR72E154KW01L
GRM32DR72E224KW01L
GRM43DR72E224KW01L
GRM43DR72E334KW01L
GRM55DR72E334KW01L
GRM43DR72E474KW01L
GRM55DR72E474KW01L
GRM55DR72E105KW01L
GRM31BR72J102KW01L
GRM31BR72J152KW01L
GRM31BR72J222KW01L
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC250
DC630
DC630
DC630
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
220pF ±10%
330pF ±10%
470pF ±10%
680pF ±10%
1000pF ±10%
1000pF ±10%
1500pF ±10%
1500pF ±10%
2200pF ±10%
2200pF ±10%
3300pF ±10%
4700pF ±10%
6800pF ±10%
10000pF ±10%
15000pF ±10%
22000pF ±10%
33000pF ±10%
47000pF ±10%
68000pF ±10%
0.10µF ±10%
0.10µF ±10%
0.15µF ±10%
0.22µF ±10%
0.22µF ±10%
0.33µF ±10%
0.33µF ±10%
0.47µF ±10%
0.47µF ±10%
1.0µF ±10%
1.6
1.6
1.6
1.6
1.6
2.0
1.6
2.0
1.6
2.0
2.0
2.0
2.0
2.0
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
3.2
4.5
4.5
5.7
4.5
5.7
5.7
3.2
3.2
3.2
0.8
0.8
0.8
0.8
0.8
1.25
0.8
1.25
0.8
1.25
1.25
1.25
1.25
1.25
1.6
1.6
1.6
1.6
2.5
1.6
2.5
3.2
2.5
3.2
3.2
5.0
3.2
5.0
5.0
1.6
1.6
1.6
0.8
0.8
0.8
0.8
0.8
1.0
0.8
1.0
0.8
1.0
1.0
1.0
1.0
1.25
1.25
1.25
1.6
1.6
1.5
1.6
2.0
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1.25
1.25
1.25
0.4
0.4
0.4
0.4
0.4
0.7
0.4
0.7
0.4
0.7
0.7
0.7
0.7
0.7
1.2
1.2
1.2
1.2
1.2
1.2
1.2
2.2
1.2
2.2
2.2
3.2
2.2
3.2
3.2
1.2
1.2
1.2
0.2 to 0.5
0.2 to 0.5
0.2 to 0.5
0.2 to 0.5
0.2 to 0.5
0.3 min.
0.2 to 0.5
0.3 min.
0.2 to 0.5
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
15
1000pF ±10%
1500pF ±10%
2200pF ±10%
Continued on the following page.
109
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
Continued from the preceding page.
Electrode g
min.
Rated Voltage
TC Code
(Standard)
Length L Width W Thickness T
Electrode e
(mm)
Part Number
Capacitance
(V)
(mm)
(mm)
(mm)
(mm)
GRM31BR72J332KW01L
GRM31BR72J472KW01L
GRM31BR72J682KW01L
GRM31BR72J103KW01L
GRM31CR72J153KW03L
GRM32QR72J223KW01L
GRM32DR72J333KW01L
GRM32DR72J473KW01L
GRM43QR72J683KW01L
GRM43DR72J104KW01L
GRM55DR72J154KW01L
GRM55DR72J224KW01L
GRM31BR73A102KW01L
GRM31BR73A152KW01L
GRM31BR73A222KW01L
GRM31BR73A332KW01L
GRM31BR73A472KW01L
GRM32QR73A682KW01L
GRM32QR73A103KW01L
GRM32DR73A153KW01L
GRM32DR73A223KW01L
GRM43DR73A333KW01L
GRM43DR73A473KW01L
GRM55DR73A104KW01L
DC630
DC630
DC630
DC630
DC630
DC630
DC630
DC630
DC630
DC630
DC630
DC630
DC1000
DC1000
DC1000
DC1000
DC1000
DC1000
DC1000
DC1000
DC1000
DC1000
DC1000
DC1000
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
3300pF ±10%
4700pF ±10%
6800pF ±10%
10000pF ±10%
15000pF ±10%
22000pF ±10%
33000pF ±10%
47000pF ±10%
68000pF ±10%
0.10µF ±10%
0.15µF ±10%
0.22µF ±10%
1000pF ±10%
1500pF ±10%
2200pF ±10%
3300pF ±10%
4700pF ±10%
6800pF ±10%
10000pF ±10%
15000pF ±10%
22000pF ±10%
33000pF ±10%
47000pF ±10%
0.10µF ±10%
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
4.5
5.7
5.7
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.5
4.5
5.7
1.6
1.6
1.6
1.6
1.6
2.5
2.5
2.5
3.2
3.2
5.0
5.0
1.6
1.6
1.6
1.6
1.6
2.5
2.5
2.5
2.5
3.2
3.2
5.0
1.25
1.25
1.25
1.25
1.6
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
2.2
2.2
3.2
3.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
2.2
2.2
2.5
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
1.5
2.0
2.0
1.5
2.0
2.0
2.0
1.25
1.25
1.25
1.25
1.25
1.5
1.5
2.0
2.0
2.0
2.0
2.0
15
110
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
Specifications and Test Methods
Specifications
No.
1
Item
Operating
Test Method
Y55 to W125D
Y
Temperature Range
Visual inspection
Using calipers
2
3
Appearance
No defects or abnormalities
Dimensions
Within the specified dimensions
No failure should be observed when 150% of the rated voltage
(200% of the rated voltage in case of rated voltage : DC250V,
120% of the rated voltage in case of rated voltage : DC1kV) is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4
5
Dielectric Strength No defects or abnormalities
The insulation resistance should be measured with DC500T50V
(DC250T50V in case of rated voltage : DC250V) and within 60T5
sec. of charging.
CU0.01µF : More than 100MΩ • µF
CF0.01µF : More than 10,000MΩ
Insulation Resistance
(I.R.)
The capacitance/D.F. should be measured at 25D at a frequency
of 1T0.2kHz and a voltage of AC1T0.2V (r.m.s.)
6
7
Capacitance
Within the specified tolerance
0.025 max.
#Pretreatment
Perform a heat treatment at 150
W0
Y10
Dissipation
Factor (D.F.)
D for 60T5 min. and then
let sit for 24T2 hrs. at *room condition.
The range of capacitance change compared with the 25D value
within Y55 to W125D should be within the specified range.
Cap. Change
Within T15%
(Temp. Range : Y55 to W125D)
Capacitance
Temperature
Characteristics
#Pretreatment
Perform a heat treatment at 150
8
W0
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at *room condition.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1 using a eutectic solder.
Then apply 10N force in the direction of the arrow.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
Adhesive Strength
of Termination
9
No removal of the terminations or other defect should occur.
10N (5N : Size 1.6g0.8mm only), 10T1s
Speed : 1.0mm/s
Glass Epoxy Board
Fig. 1
Appearance
Capacitance
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each 3 mutually perpendicular directions
(total of 6 hrs.).
Vibration
Resistance
D.F.
10
0.025 max.
15
Solder resist
Cu
Glass Epoxy Board
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2 using a eutectic solder.
No cracking or marking defects should occur.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
b
φ4.5
d
c
50
Pressurizing
20
a
speed : 1.0mm/s
t : 1.6
Pressurize
100
R230
11 Deflection
Dimension (mm)
LZW
(mm)
a
b
c
d
Flexure=1
1.6Z0.80
2.0Z1.25
3.2Z1.60
3.2Z2.50
4.5Z3.20
5.7Z5.00
1.0
1.2
2.2
2.2
3.5
4.5
3.0
4.0
5.0
5.0
7.0
8.0
1.25
1.65
2.05
2.95
3.75
5.65
Capacitance meter
45 45
(in mm)
1.0
Fig. 3
Fig. 2
* "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmospheric pressure : 86 to 106kPa
Continued on the following page.
111
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
12
Item
Test Method
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in eutectic solder solution for 2T0.5 sec. at 235T5D.
Immersing speed : 25T2.5mm/s
Solderability of
Termination
75% of the terminations are to be soldered evenly and continuously.
*
Preheat the capacitor at 120 to 150D for 1 min.
Appearance
No marking defects
Within T10%
Immerse the capacitor in eutectic solder solution at 260T5D for
10T1 sec. Let sit at *room condition for 24T2 hrs., then measure.
#Immersing speed : 25T2.5mm/s
Capacitance
Change
#Pretreatment
Perform a heat treatment at 150
let sit for 24T2 hrs. at *room condition.
D.F.
I.R.
0.025 max.
W00
Y10
Resistance
13 to Soldering
Heat
D for 60T5 min. and then
CU0.01µF : More than 100MΩ • µF
CF0.01µF : More than 10,000MΩ
*Preheating for more than 3.2Z2.5mm
Dielectric
Strength
Step
1
2
Temperature
100D to 120D
170D to 200D
Time
1 min.
1 min.
In accordance with item No.4
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4 using a eutectic solder.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Appearance
No marking defects
Within T7.5%
0.025 max.
Capacitance
Change
D.F.
I.R.
Let sit for 24T2 hrs. at *room condition, then measure.
Time (min.)
30T3
2 to 3
30T3
2 to 3
Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Step
CU0.01µF : More than 100MΩ • µF
CF0.01µF : More than 10,000MΩ
1
2
3
4
Temperature
14
#Pretreatment
Perform a heat treatment at 150
Cycle
W00
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at *room condition.
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
Appearance
No marking defects
Within T15%
0.05 max.
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
W24
Capacitance
Change
for 500
hrs.
Y00
Remove and let sit for 24T2 hrs. at *room condition, then
measure.
Humidity
15 (Steady
State)
D.F.
I.R.
CU0.01µF : More than 10MΩ • µF
CF0.01µF : More than 1,000MΩ
#Pretreatment
Perform a heat treatment at 150
W00
Y10
D for 60T5 min. and then
let sit for 24T2 hrs. at *room condition.
15
Dielectric
Strength
In accordance with item No.4
No marking defects
Appearance
Apply 120% of the rated voltage (150% of the rated voltage in
case of rated voltage : DC250V, 110% of the rated voltage in
Within T15% (rated voltage : DC250V, DC630V)
Within T20% (rated voltage : DC1kV)
Capacitance
Change
W48
Y00
case of rated voltage : DC1kV) for 1,000
hrs. at maximum
operating temperature T3D. Remove and let sit for 24 T2 hrs. at
*room condition, then measure.
The charge/discharge current is less than 50mA.
#Pretreatment
D.F.
I.R.
0.05 max.
16 Life
CU0.01µF : More than 10MΩ • µF
CF0.01µF : More than 1,000MΩ
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at *room condition.
Dielectric
Strength
In accordance with item No.4
No marking defects
Within T15%
Appearance
Apply the rated voltage at 40T2D and relative humidity of 90 to
W24
Capacitance
Change
Humidity
Loading
95% for 500
hrs.
Y00
Remove and let sit for 24T2 hrs. at *room condition, then
measure.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at *room condition.
(Application :
D.F.
I.R.
0.05 max.
17
DC250V,
CU0.01µF : More than 10MΩ • µF
CF0.01µF : More than 1,000MΩ
DC630V
item)
Dielectric
Strength
In accordance with item No.4
* "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmospheric pressure : 86 to 106kPa
112
相关型号:
GRM31BR73A152KW01L
Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0015uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT
MURATA
GRM31BR73A222KW01L
Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0022uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT
MURATA
GRM31BR73A471KW01L
Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.00047uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT
MURATA
©2020 ICPDF网 联系我们和版权申明