HN-250U [MURATA]
2.4 GHz Frequency Hopping Wireless Data Modem;型号: | HN-250U |
厂家: | muRata |
描述: | 2.4 GHz Frequency Hopping Wireless Data Modem 无线 |
文件: | 总3页 (文件大小:112K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DEVELOPER KIT
(Info: click here)
HN-250
Features:
Benefits:
• 2.4GHz Frequency Hopping Spread
Spectrum Technology
• 1.23Mbps over the air data rate
• 921Kpbs (USB only) and 115Kbps I/O
data rates
• Exceptional immunity to multipath
fading and jamming
• Supports high speed applications
needing long range
• Co-location of multiple networks without
interference
• License-free application worldwide
• Cost-effective, simple installation
• Connects to PC Serial ports
2.4GHz
Frequency
Hopping
• 64 Hopping Patterns
• FCC Certified and CE marked
• Integral 6dB patch antenna
• RS-232 asynchronous or USB serial
interface
Wireless Data
Modem
The HN-250 is a versatile, low cost, multi-purpose 2.4 GHz frequency-hopping wireless data modem. Built
around the WIT2450 radio, the HN-250 has an integral 6dB patch antenna creating a “single piece” modem.
Communication with the HN-250 is through a 921.6kbps (USB version only) or 115.2Kbps (USB or RS-232
versions) asynchronous serial port supporting a standard RS-232 interface. The HN-250 communicates over
the air at 1.23Mbps and supports both point-to-point and point-to-multipoint networks.
HN-250
Specifications
HN-250
HN-250X
HN-254
Frequency Band
2401 - 2471 MHz (USA)
2452 - 2478 MHz (Canada)
Licensing
Unlicensed under FCC Part 15, ETSI 300.328
Number of Channels
Hopping Patterns
I/O Data Rates
86 USA; 50 Canada, software selectable
User configurable, 64 patterns (networks) available
Up to 115.2 Kbps Asynchronous
RF Channel Rate
Line of Site Range
RF Bandwidth
460 Kbps
> 5 Miles
750 KHz
Modulation Type
Output Impedance
Network Protocol
Transmit Power
Receive Sensitivity
Power Requirements
Serial Data Interface
GFSK
50 ohms
Dynamically Assigned TDMA with ARQ
EIRP: +16dBm/+24dBm
-99dBm for 10-5 BER
-93 dBm for 10-5 BER
9 Vdc 160mA typ. 750mA surge
Async. RS-232
-99dBm for 10-5 BER
www.RFM.com E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 1 of 3
HN-211 - 3/14/08
Mechanical Specifications
HN-250
HN-250X
HN-254
Antenna
Integrated 6dB Patch
n/a
Polycarbonate, NEMA 4X
130 x 79 x 35 (excl. flange)
235g
Integrated 6dB Patch
Case Materials
Dimensions (mm)
Weight excl. cable
Antenna Connector
Data Connector
Power Connector
n/a
Rev. TNC Male
9-Pin D/USB B
2 Pin DIN
n/a
Environmental Specifications
Temperature Range
Humidity
-30°C to +70°C (radio enclosure)
95% at +40°C, Non-condensing
www.RFM.com E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 2 of 3
HN-250 - 3/14/08
Versatility
The HopNet 211 family of modems are a versatile, low cost, multi-purpose 2.4 GHz frequency-hopping wireless data modem. Built around the WIT2411
radio, the HN-211 has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-211 is through an asynchronous,
115.2Kbps serial port supporting a standard RS-232 interface or a 921.6Kbps USB version is also available. The HN-211 communicates over the air at
1.23Mbps in both point-to-point and point-to-multipoint networks.
Simplicity
With a NEMA 4X weatherproof enclosure and aluminum mounting flange, the HN-211 is simple to install on the side of a building or attached to a mast.
With no antenna to connect, the HN-211 is simply mounted where the antenna would ordinarily be mounted. This removes the need for long antenna cable
runs, expensive both in terms of cost and performance. The HN-211 comes with a 50-foot cable that connects to an indoor Serial Adapter Box (included)
that provides a standard RS-232 serial 9-pin D connection. The HN-214 comes with just a 4-foot cable when long cable runs are not needed. The Serial
Adapter Box also provides power to the HN-211 through a universal 110/220 50/60 wall-mount power supply (also included).
The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-211 ideal for a variety of "last mile" applications. For
applications requiring more antenna gain, the HN-211X replaces the built-in patch antenna with an external TNC connector. When paired with the Cirronet
SNAP2411 family of products, the HN-211 provides a cost-effective link from remote devices to Ethernet/IP-based applications. These applications include
Intranet-based applications as well as Internet access. The HN-211 also is ideal for use in SCADA applications as remote modems in multipoint
configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power levels of 8mW and 65mW allow the HN-
211 to be used worldwide even with the gain of the patch antenna.
Useability
Based on the third generation Cirronet WIT2411 spread spectrum frequency-hopping radio, the HN-211 has exceptional multipath fade rejection as well
as immunity to jamming. The WIT2411 is a field proven performer that delivers robust, reliable real world performance. The HN-211 is both FCC and CE
marked. Combined with its operation in the 2.4GHz ISM band, the HN-211 can be deployed around the world without a license.
www.RFM.com E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 3 of 3
HN-250 - 3/14/08
相关型号:
©2020 ICPDF网 联系我们和版权申明