HPR1023/H [MURATA]
DC-DC Regulated Power Supply Module, SIP-6/5;型号: | HPR1023/H |
厂家: | muRata |
描述: | DC-DC Regulated Power Supply Module, SIP-6/5 |
文件: | 总4页 (文件大小:135K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OBSOLETE PRODUCT
Contact Factory for Replacement Model
Product Data Sheet
.
SIP DC/DC CONVERTER
HPR10XX
DESCRIPTION
The HPR10XX Series uses advanced circuit design and packag-
ing technology to deliver superior reliability and performance.
A 170kHz push-pull oscillator is used in the input stage. Beat-
frequency oscillation problems are reduced when using the
HPR10XX Series with high frequency isolation amplifiers.
Reduced parts count and high efficiency add to the reliability
of the HPR10XX Series. The high efficiency of the HPR10XX
Series means less internal power dissipation, as low as 190mW.
With reduced heat dissipation the HPR10XX Series can operate
at higher temperatures with no degradation. In addition, the high
efficiency of the HPR10XX Series means the series is able to
offer greater than 13 W/inch3 of output power density. Opera-
tion down to no load will not impact the reliability of the series,
although a 1mA minimum load is needed to realize published
specifications.
FEATURES
l
l
l
l
l
LOW COST
SINGLE-IN-LINE PACKAGE (SIP)
INTERNAL INPUT AND OUTPUT FILTERING
NON-CONDUCTIVE CASE
HIGH OUTPUT POWER DENSITY:
13 WATTS/INCH3
TheHPR10XXSeriesprovidestheuserlowcostwithoutsacrific-
ing reliability.The use of surface mounted devices and advanced
manufacturing technologies make it possible to offer premium
performance and low cost.
l
l
EXTENDED TEMPERATURE RANGE:
-25°C TO +65°C
HIGH EFFICIENCY: TO 72% TYPICAL
MECHANICAL
FRONT
VIEW
Notes: All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
RIGHT
PIN PLACEMENT TOLERANCE: 0.015ꢀ
HPR10XX
SIDE
VIEW
PIN CONNECTIONS
1. +VIN 2. -VIN
BOTTOM
VIEW
4. -VOUT 5. COM*
6. +VOUT
* Common pin not present on single output models.
Internet: http://www.cd4power.com
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 520.295.4100 Fax: 520.770.9369
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133 Fax:+353.61.474.141
HPR10XX REV D 8/2007
Page 1
ELECTRICAL SPECIFICATIONS
Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified.
A
NOMINAL
INPUT
RATED
OUTPUT
VOLTAGE
RATED
OUTPUT
CURRENT
INPUT CURRENT
REFLECTED
RIPPLE
EFFICIENCY
(%)
VOLTAGE
NO LOAD
RATED LOAD
(mA)
CURRENT
MODEL
(VDC)
(VDC)
(mA)
(mA)
(mAp-p)
HPR1000
HPR1001
HPR1002
HPR1003
HPR1004
5
5
5
5
5
5
200
83
67
100
42
33
33
33
33
33
290
290
285
285
285
8
8
8
8
8
68
69
70
70
70
12
15
5
12
HPR1005
HPR1006
HPR1007
HPR1008
HPR1009
5
15
5
12
15
5
34
200
83
67
100
33
18
18
18
18
285
110
107
107
107
8
70
70
71
71
71
12
12
12
12
10
10
10
10
HPR1010
HPR1011
HPR1012
HPR1013
HPR1014
12
12
15
15
15
12
15
5
12
15
42
34
200
83
18
18
15
15
15
107
107
96
94
94
10
10
10
10
10
71
71
70
70
71
67
HPR1015
HPR1016
HPR1017
HPR1018
HPR1019
15
15
24
24
12
15
5
42
34
200
83
15
15
12
12
94
94
60
60
10
10
15
15
71
71
71
71
12
HPR1020
HPR1021
HPR1022
HPR1023
24
24
24
24
15
5
12
15
67
100
42
12
12
12
12
58
58
58
58
15
15
15
15
72
72
72
72
34
Note: Other input to output voltages may be available. Please contact factory.
COMMON SPECIFICATIONS
Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified.
A
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
INPUT
Voltage Range
4.5
10.8
13.5
21.6
5
5.5
13.2
16.5
26.4
VDC
VDC
VDC
VDC
12
15
24
Voltage Rise Time
See Typical Performance Curves & Application Notes: ꢀCapacitive Loading Effects on Start-Up of DC/DC Convertersꢀ
ISOLATION
Rated Voltage
Test Voltage
Resistance
Capacitance
Leakage Current
1000
1000
VDC
Vpk
GΩ
pF
μArms
60 Hz, 10 Seconds
VISO= 240VAC, 60Hz
10
25
2
100
8.5
OUTPUT
Rated Power
Voltage Setpoint Accuracy
Ripple & Noise
1.0
30
W
%
mVp-p
mVrms
VDC
VDC
VDC
%/Deg C
Rated Load, Nominal VIN
BW = DC to 10MHz
BW =10Hz to 2MHz
1mA Load, VOUT = 5V
1mA Load, VOUT = 12V
1mA Load, VOUT = 15V
5
100
Voltage
7
15
18
Temperature Coefficent
.01
1
REGULATION
Line Regulation
High Line to Low Line
%/%Vin
Load Regulation (5V out only)
Load Regulation (All other Models)
Rated Load to 1mA Load
Rated Load to 1mA Load
10
3
%
%
GENERAL
Switching Frequency
Frequency Change
Package Weight
MTTF per MIL-HDBK-217, Rev. E
Ground Benign
Fixed Ground
Naval Sheltered
Airborne Uninhabited Fighter
Moisture Sensitivity Level (MSL)
170
24
2
kHz
%
g
Over Line and Load
Circuit Stress Method
T = +25°C
3.8
1.4
685
211
2
MHr
MHr
kHr
A
T = +35°C
A
T = +35°C
A
T = +35°C
kHr
IPC/JEADEC J-STD-20
TEMPERATURE
Specification
Storage
-25
-50
+25
+65
+110
°C
°C
* For demonstrated MTTF results reference Reliability Report HPR105
Page 2
HPR10XX REV D 8/2007
TYPICAL PERFORMANCE CURVES
VOUT VS LOAD
VOUT VS LOAD
( 5Vout Models)
VOUT VS LOAD
(12Vout Models)
(5Vout Models)
12.5
12.4
5.7
5.4
5.2
5.0
5.5
5.3
12.3
12.2
12.1
12.0
11.9
4.8
4.6
5.1
4.9
80
0
40
120
160
0
20
40
60
80
80
90
0
20
40
60
80
Output Current (mA)
Output Current each load (mA)
Output Current each load (mA)
VOUT VS LOAD
( 12Vout Models)
VOUT VS LOAD
(15Vout Models)
VOUT VS LOAD
( 15Vout Models)
16.5
16.0
12.6
12.5
15.9
15.7
15.5
15.3
12.4
12.3
12.2
15.5
15.0
14.5
15.1
14.9
12.1
12.0
14.0
13.5
0.2
0.4
0.6
0.8
1.0
0
10
20
30
40
0
20
40
60
0
Output Current each load (mA)
Output Current each load (mA)
Output Power each load (Watts)
OSCILLATION FREQUENCY VS
TEMPERATURE
EFFICIENCY VS LOAD
90
75
220
200
180
160
60
45
30
15
0
140
60
20
40
80
-30
0
30
60
0
100
% of Rated Load (%)
Temperature (°C)
SAFE OPERATING AREA
LOAD CAPACITANCE vs INPUT RISE TIME
(5 Vout models)
LOAD CAPACITANCE vs INPUT RISE TIME
(15 Vout models)
600
60
50
40
30
20
10
0
500
400
300
SAFE OPERATING AREA
SAFE OPERATING AREA
200
100
0
0
5
10
15
20
25
30
35
40
45
50
0
5
10
15
20
25
30
Rise Time of Input Voltage (mS)
35
40
45
50
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
NOTES:
90
80
70
1.) When operated within the SAFE OPERATING AREA as de-
fined by the above curves, the output voltage of HPR10XX
devices is guaranteed to be within 95% of its steady-state
value within 100 milliseconds after the input voltage has
reached 95% of its steady-state value.
60
50
40
30
20
SAFE OPERATING AREA
2.) For dual output models, total load capacitance is the sum of
the capacitances on the plus and minus outputs.
10
0
0
5
10
15
20
25
30
35
40
45
50
Rise Time of Input Voltage (mS)
HPR10XX REV D 8/2007
Page 3
ORDERING INFORMATION
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation.....................................................490mW
Short Circuit Duration......................................................Momentary
Lead Temperature (soldering, 10 seconds max)..................+300°C
HPR 10XX /H
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
Screening Option
THROUGH-HOLE SOLDERING INFORMATION
These devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of
no more than 10 seconds. Within this time and temperature range, the integrity of the device’s body will not be compromised and internal temperatures within
the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering.
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of
this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein
are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications.
Page 4
HPR10XX REV D 8/2007
相关型号:
HPR102WC
DC-DC Regulated Power Supply Module, 1 Output, 0.75W, Hybrid, ROHS COMPLIANT, SMD-14
MURATA
©2020 ICPDF网 联系我们和版权申明