KDC_NMJ [MURATA]
5.2kVDC Isolated 1W DC/DC Converters; 5.2kVDC 1W隔离DC / DC转换器型号: | KDC_NMJ |
厂家: | muRata |
描述: | 5.2kVDC Isolated 1W DC/DC Converters |
文件: | 总6页 (文件大小:161K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NMJ Series
5.2kVDC Isolated 1W DC/DC Converters
SELECTION GUIDE
Nominal
Input
Voltage
Output
Voltage
Output
Current
Ripple &
Noise4
Efficiency
(Min.)
Isolation
Capacitance
MTTF1
Order Code
V
5
V
5
mA
100
55
mV p-p
40
%
60
65
65
65
60
65
65
65
66
64
68
pF
kHrs
4950
3832
2770
1903
3688
3029
2324
1682
13780
13460
13360
12700
11490
9980
8447
8176
7660
6950
NMJ0505SC
NMJ0509SC
NMJ0512SC
NMJ0515SC
NMJ1205SC
NMJ1209SC
NMJ1212SC
NMJ1215SC
NMJ0303SAC
NMJ0503SAC
NMJ0505SAC
NMJ0509SAC
NMJ0512SAC
NMJ0515SAC
NMJ1205SAC
NMJ1209SAC
NMJ1212SAC
NMJ1215SAC
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5
9
30
5
12
15
5
42
20
5
33
20
12
12
12
12
3.3
5
100
55
40
FEATURES
ꢀRoHS compliant
9
30
12
15
3.3
3.3
5
42
20
33
20
ꢀUL60950 recognized
ꢀPower density 0.42W/cm3
303
303
200
70
60
5
50
ꢀWide temperature performance at full
1 watt load, –40°C to 60°C
Contact Factory
5
9
12
15
5
111
50
50
50
50
50
50
50
72
71
71
69
73
73
74
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5
83
ꢀSingle and dual outputs
ꢀUL 94V-0 package material
ꢀNo heatsink required
5
66
12
12
12
12
200
111
83
9
12
15
ꢀFootprint 1.91cm2
66
When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external
capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the
additional external capacitance for reliable start up.
ꢀSIP package style
ꢀ5.2kVDC isolation
INPUT CHARACTERISTICS
ꢀ3V, 5V & 12V input
Parameter
Conditions
Min.
2.97
4.5
Typ.
3.3
5
Max.
3.63
5.5
Units
V
ꢀ3V, 5V, 9V, 12V and 15V output
ꢀInternal SMD construction
ꢀFully encapsulated with toroidal magnetics
Continuous operation, 3V input types
Continuous operation, 5V input types
Continuous operation, 12V input types
Voltage range
10.8
12
13.2
OUTPUT CHARACTERISTICS
ꢀPin compatible with the NMV series SIP
Parameter
Rated Power2
Conditions
Min.
Typ.
Max.
1
Units
W
DC/DC converters
TA=-40ºC to 60ºC
ꢀMTTF up to 13 million hours
ꢀCustom solutions available
Voltage Set Point Accuracy See tolerance envelopes
Line regulation
High VIN to low VIN
1.0
10.0
7.0
1.2
15.0
10.0
10.0
7.0
%/%
%
10% load to rated load, xx03
10% load to rated load, 0505
10% load to rated load, 0509, 0512, 0515
10% load to rated load, 12xx
10% load to rated load, 5V output types
10% load to rated load, 9V output types
10% load to rated load, 12V output types
10% load to rated load, 15V output types
All types
Load regulation
Single outputs
PRODUCT OVERVIEW
6.0
The NMJ series are dual and single output
DC/DC converters in a 7 pin SIP package style
offering pin and functionality compatibility with
the NMV series SIP DC/DC converters. The NMJ
series is UL60950 recognized and suitable for
applications where safety and miniaturisation
are of paramount importance. Isolation barrier
approved for supplementary/reinforced insulation
- see page 2.
5.0
10.0
6.0
15.0
10.0
10.0
10.0
Load regulation
Dual outputs
%
6.0
6.0
Zero Load Power Consumption
250
mW
ABSOLUTE MAXIMUM RATINGS
Short-circuit protection3
1 second
300°C
5V
Lead temperature 1.5mm from case for 10 seconds
Input voltage VIN, NMJ03 types
Input voltage VIN, NMJ05 types
7V
Input voltage VIN, NMJ12 types
15V
1. Calculated using MIL-HDBK-217 FN2 calculation model with nominal input voltage at full load.
2. See derating graph.
3. Supply voltage must be discontinued at the end of the short circuit duration.
4. See ripple & noise test method.
For full details go to
www.murata-ps.com/rohs
All specifications typical at T =25°C, nominal input voltage and rated output current unless otherwise specified.
A
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NMJC.G02 Page 1 of 6
NMJ Series
5.2kVDC Isolated 1W DC/DC Converters
ISOLATION CHARACTERISTICS
Parameter
Isolation test voltage
Resistance
Conditions
Flash tested for 1 second
Viso= 500VDC
Min.
5200
Typ.
1
Max.
Units
VDC
GΩ
GENERAL CHARACTERISTICS
Parameter
Conditions
Single output
Dual output
Min.
Typ.
45
70
Max.
Units
kHz
Switching frequency
TEMPERATURE CHARACTERISTICS
Parameter
Specification
Storage
Conditions
All output types
Min.
-40
Typ.
Max.
60
Units
°C
-55
130
33
Case Temperature above ambient All output types
Cooling Free air convection
TEMPERATURE DERATING GRAPH
TOLERANCE ENVELOPE
TOLERANCE ENVELOPE, 3.3V in, 3V out type only
1.5
+10%
+6%
+9%
+2.5%
-4%
60ºC
+1%
VNOM
+1%
-7%
1.0
0.5
0
VNOM
-7%
-7.5%
Safe Operating Area
-15%
100
100
75
Output Load Current (%)
75
Output Load Current (%)
10 25
50
10 25
50
-40
0
40
80
Ambient Temperature (ºC)
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test
voltage, applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions NMJ series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 5.2kVDC for 1 second.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
The NMJ series has been recognized by Underwiters Laboratory to 300Vrms for Supplementary Insulation and 150Vrms for Reinforced Insulation.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on
materials, construction and environment. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be
reduced by 20% from specified test voltage.
SAFETY APPROVAL
The NMJ series has been recognised by Underwriters Laboratory (UL) to UL 60950 for supplementary insulation up to 300Vrms and reinforced insulation up to 150Vrms at a
maximum ambient temperature of 60ºC. File number E179522 applies.
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300ºC for 10 seconds. The pin termination finish
on this product series is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The series is backward compatible with Sn/Pb soldering
systems.
For further information, please visit www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NMJC.G02 Page 2 of 6
NMJ Series
5.2kVDC Isolated 1W DC/DC Converters
OUTPUT RIPPLE REDUCTION
By using the values of inductance and capacitance stated, the output ripple at the rated load is lowered to 5mV p-p max.
Component selection
Capacitor: It is required that the ESR (Equivalent Series Resistance) should be as low as possible, ceramic types are recommended.
The voltage rating should be at least twice (except for 15V output), the rated output voltage of the DC/DC converter.
Inductor: The rated current of the inductor should not be less than that of the output of the DC/DC converter. At the rated current, the DC resistance of the inductor should be
such that the voltage drop across the inductor is <2% of the rated voltage of the DC/DC converter. The SRF (Self Resonant Frequency) should be >20MHz.
L
DC
Power
Source
Load
C
DC
Inductor
Capacitor
Size
L, μH
Through Hole
SMD
Consult Factory
C, μF
V rating, V
3.3V single output types
5V single output types
9V single output types
12V single output types
15V single output types
Consult Factory
Consult Factory
Consult Factory
Consult Factory
L
+VOUT
Load
Load
C
DC
Power
Source
OV
C
DC
-VOUT
L
Inductor
Capacitor
Size
L, μH
Through Hole
22R223C
SMD
82223C
Consult Factory
82224C
Consult Factory
C, μF
V rating, V
10
5V dual output types
9V dual output types
12V dual output types
15V dual output types
22
4.70
1206
68
22R224C
0.47
0805
25
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NMJC.G02 Page 3 of 6
NMJ Series
5.2kVDC Isolated 1W DC/DC Converters
OUTPUT RIPPLE REDUCTION (continued)
SMD option 8200 Inductor Series Mechanical Dimensions
Through hole option 2200R Inductor Series Mechanical Dimensions
0.283 0.020
(7.2 0.50)
2.5 (0.098)
0.2 (0.008)
2.0 (0.080)
0.3 (0.012)
103C
0.335 0.020
(8.5 0.50)
Recommended pad layout
3.81 (0.15)
1.52
(0.060)
0.024 0.002
(0.60 0.05)
Recommended footprint
+0.006
-0.000
+0.15
Ø1.20
-0.00
Ø0.047
0.118(3.00)
All dimensions in inches (mm).
All dimensions in inches (mm).
For more information please visit www.murata-ps.com
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NMJC.G02 Page 4 of 6
NMJ Series
5.2kVDC Isolated 1W DC/DC Converters
CHARACTERISATION TEST METHODS
Ripple & Noise Characterisation Method
Ripple and noise measurements are performed with the following test configuration.
C1
C2
1uF X7R multilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC/DC converter
10uF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC/DC converter with an ESR of less
than 100mꢀ at 100 kHz
C3
R1
100nF multilayer ceramic capacitor, general purpose
450ꢀ resistor, carbon film, +/-1% tolerance
R2
50ꢀ BNC termination
T1
3T of the coax cable through a ferrite toroid
RLOAD
R3
Resistive load to the maximum power rating of the DC/DC converter. Connections should be made via twisted wires
50ꢀ resistor, carbon film, +/-1%
Measured values are multiplied by 10 to obtain the specified values.
Differential Mode Noise Test Schematic
DC/DC Converter
OSCILLOSCOPE
Y INPUT
R2
C1 C2 C3
R1
T1
+
+
Input
Output
SUPPLY
-
-
R LOAD
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NMJC.G02 Page 5 of 6
NMJ Series
5.2kVDC Isolated 1W DC/DC Converters
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS
Dual Output
0.77 (19.50)
Single Output
Pin
1
Function
+VIN
Pin
1
Function
+VIN
0.39
(9.80)
2
-VIN
2
5
7
-VIN
5
-VOUT
OV
-VOUT
6
+VOUT
7
+VOUT
0.49 (12.50)
0.18 (4.60)
RECOMMENDED FOOTPRINT DETAILS
0.045 (1.15)
0.039 (1.00)
x5 HOLES Ø
0.004 (0.10)
0.022 (0.55)
0.018 (0.45)
1
2
5
6*
7
0.14 (3.60)
*
0.1 (2.54)
0.022 (0.55)
0.018 (0.45)
0.1 (2.54)
Weight: 4.3g
0.1 (2.54)
* Hole not required for single output variants.
All dimensions in inches 0.01 (mm 0.25mm).
0.094 (2.40)
0.012 (0.30)
0.008 (0.20)
0.074 0.03 (1.88 0.75)
TUBE OUTLINE DIMENSIONS
ꢀꢁꢂꢃꢄꢅ
ꢆꢄꢁꢀꢀꢇ
ꢀꢁꢋꢋꢉꢅꢆꢈꢌꢁꢂꢀꢇ
All dimensions in inches 0.01 (mm 0.25mm). All pins on a 0.1 (2.54) pitch and within
0.01 (0.25) of true position.
* Pin not fitted on single output variants.
ꢀꢁꢈꢉꢊꢅꢆꢋꢁꢀꢀꢇ
ꢀꢁꢂꢀꢋꢅꢆꢋꢁꢂꢀꢇ
ꢀꢁꢀꢋꢉꢅꢆꢈꢁꢋꢀꢇ
ꢀꢁꢀꢂꢌꢀꢁꢀꢀꢄꢅ
ꢆꢀꢁꢄꢀꢀꢁꢈꢋꢇ
Unless otherwise stated all dimensions in inches 0.02 (mm 0.5mm).
Tube length : 20.669 0.079 (525mm 2mm).
Tube Quantity : 25
USA:
Canada: Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com
UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com
Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com
Murata Power Solutions, Inc.
France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com
Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED
Japan: Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com
Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com
Website: www.murata-ps.jp
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
China:
Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com
Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com
notice.
© 2008 Murata Power Solutions, Inc.
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NMJC.G02 Page 6 of 6
相关型号:
©2020 ICPDF网 联系我们和版权申明