LQH31HNR88J03K [MURATA]
General Purpose Inductor, 0.88uH, 5%, 1 Element, Ferrite-Core, SMD, 1206, CHIP, 1206;型号: | LQH31HNR88J03K |
厂家: | muRata |
描述: | General Purpose Inductor, 0.88uH, 5%, 1 Element, Ferrite-Core, SMD, 1206, CHIP, 1206 测试 射频感应器 电感器 |
文件: | 总86页 (文件大小:2176K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
Mu ra ta
Ma nu fa cturin g Co., Ltd .
Cat.No.O05E-13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
1
2
CONTENTS
Part Numbering
Products Guide
Selection Guide
High Frequency
2
4
5
3
4
1
2
3
4
5
Monolithic Type
Film Type
LQG15H/ LQG18H Series
LQP03T/ LQP15T/ LQP15M/ LQP18M Series
LQW15A/ LQW18A Series
LQW2BH/ LQW31H Series
LQH31H Series
6
13
23
33
37
5
Wound Type
Wound Type
Wound Type
6
for General Use
7
6
7
Monolithic Type
Wound Type
LQM18N/ LQM21N Series
38
41
LQH31M/ LQH32M/ LQH43M (N) Series
8
for DC-DC Converter
8
Wound Type
LQH2MC Series
47
9
for Choke
9
Monolithic Type
LQM21D/ LQM21F/ LQM31F Series
LQH31C/ LQH32C/ LQH43C Series
LQH3KS Series
48
52
57
59
62
69
71
83
10
11
12
10
11
12
Wound Type
Magnetic Shielded Type
Wound/ Magnetic Shielded Type LQH55D/ LQH66S Series
!Caution/Notice
Packaging
Design Kits
Information
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U. S. A.
Recycled Paper
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
o Part Numbering
Chip Coils (SMD)
(Part Number)
LQ
H
32
M
N
331
K
2
3
L
q
w
e
r
t
y
u
i o !0
yInductance
qProduct ID
Expressed by three figures. The unit is micro-henry (µH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits. If inductance is less
than 0.1µH, the inductance code is expressed by a combination
of two figures and the capital letter "N", and the unit of
inductance is nano-henry (nH).
Product ID
LQ
Chip Coils
wStructure
Code
G
Structure
Monolithic Type (Air-core Coil)
Wound Type (Ferrite Core)
Monolithic Type (Ferrite Core)
Film Type
The capital letter "N" indicates the unit of "nH", and also
expresses a decimal point. In this case, all figures are significant
digits.
H
M
P
uInductance Tolerance
W
Wound Type (Air-core Coil)
Code
B
Inductance Tolerance
±0.1nH
±0.2nH
±0.5nH
±2%
eDimensions (LgW)
Code
03
Dimensions (LgW)
0.6g0.3mm
1.0g0.5mm
1.6g0.8mm
2.0g1.25mm
2.0g1.5mm
2.0g1.6mm
3.2g1.6mm
3.2g2.5mm
3.3g3.3mm
4.5g3.2mm
5.7g5.0mm
6.3g6.3mm
EIA
C
0201
0402
0603
0805
0805
0806
1206
1210
1212
1812
2220
2525
D
15
G
18
H
±3%
21
J
±5%
2B
2M
31
K
±10%
M
N
±20%
±30%
32
S
±0.3nH
±0.05nH
3K
43
W
iFeatures
55
66
Code
Features
Series
LQG/LQP/LQW/LQM*1/LQH*2
0
Standard Type
rApplications and Characteristics
High-Q/
LQW15A/LQW18A/LQW2BH
Low DC Resistance
Code
H
Series
Applications and Characteristics
Monolithic Air-core
1
LQG
Standard Type
Low DC Resistance
Standard Type
Low DC Resistance
Low Profile Type
Large Current Type
LQM21N
LQH32C
N
for Resonant Circuit
2
3
5
7
LQH32C/LQH32M/LQH3KS
LQH32C
for Choke
(Low-current DC Power Supplies)
D
LQM
F
M
T
for Choke (DC Power Supplies)
Film Type
LQH32C/LQH3KS
LQM21F
LQP
Film Type (Low DC Resistance Type)
High Q Type (UHF-SHF)
*1 : Except LQM21N Series
*2 : Except LQH32/LQH3K Series
A
H
N
M
D
C
S
H
LQW
High Q Type (VHF-UHF)
oElectrode
for Resonant Circuit
•Lead (Pb) Free
for Resonant Circuit (Coating Type)
for Choke
Code
Electrode
Series
LQH
for Choke (Coating Type)
for Choke (Magnetically Shielded Type)
for High-frequency Resonant Circuit
0
2
3
LQG18H/LQP03T/LQWppA/LQM
LQG15H/LQP15T/LQPppM/LQH2MC
Sn
LF Solder LQWppH/LQH (Except LQH2MC)
tCategory
Code
N
Category
Standard Type
S
Continued on the following page.
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
(Part Number)
LQ
H
32
M
N
331
K
2
3
L
q
w
e
r
t
y
u
i o !
!Packaging
Code
Packaging
Series
*1
LQH /LQW
*2
K
Plastic Taping (ø330mm Reel)
Plastic Taping (ø180mm Reel)
Bulk
H/LQM31F/LQM21
pp
*2
H/LQM31F/LQM21
L
LQH/LQW
pp
B
All Series
*3
LQW18A/LQG/LQM18N/LQM21 /LQP
*4
J
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
*3
A/LQG/LQM18N/LQM21 /LQP
D
LQW
pp
*1 Except LQH43C/LQH66S
*2 LQM21D(22 - 47µH)/LQM21F(4.7 - 47µH)/LQM21N(2.7 - 4.7µH) only.
*3 LQM21D(1.0 - 10µH)/LQM21F(1.0 - 2.2µH)/LQM21N(0.1 - 2.2µH) only.
*4 Except LQP15T
3
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Products Guide
Murata's LQp series of chip coils consists of compact, high-performance inductors. Their innovative coil and case structures
mean low DC resistance and outstanding high-frequency characteristics. The series is designed for a variety of applications,
facilitating component selection for individual circuit requirements.
Dimensions
Inductance Range (H)
10n 100n 10 100
Application
Part Number
Structure
(mm)
EIA Code
1n
1
µ
µ
µ
1m
10m
1.0nH
1.0
0402
270nH
LQG15H
LQG18H
LQP03T
LQP15T
LQP15M
LQP18M
LQW15A
LQW18A
LQW2BH
LQW31H
LQH31H
LQM18N
LQM21N
LQH31M
LQH32M
LQH43M(N)
LQH2MC
LQM21D
LQM21F
0.5
Multilayer
High Frequency Range
1.2nH
0.6nH
1.0nH
1.0nH
1.3nH
1.3nH
1.6
0603
0201
0402
0402
0603
0402
0603
0805
1206
1206
0603
0805
1206
1210
1812
0806
0805
0805
100nH
0.8
0.3
0.5
0.5
0.8
0.5
0.6
1.0
27nH
18nH
Film
1.0
1.6
33nH
Tight Inductance
Tolerance
100nH
1.0
1.6
2.0
3.2
3.2
120nH
2.2nH
2.7nH
470nH
0.8
1.5
Wound
(air core)
470nH
8.8nH
100nH
1.6
Wound
(ferrite core)
54nH
47nH
880nH
1.6
1.6
2.0
2200nH
0.8
Magnetically shielded
multilayer
µ
0.1 H
4.7 H
µ
1.25
3.2
3.2
µ
0.15 H
100 H
µ
General Frequency Range
1.6
2.5
Wound
(ferrite core)
µ
1.0 H
560 H
µ
4.5
µ
1.0 H
2200 H
µ
3.2
2.0
2.0
2.0
3.2
4.7 H
µ
82 H
µ
DC-DC Converter Type
Wound
1.6
µ
1.0 H
47 H
µ
1.25
1.25
Magnetically shielded
multilayer
µ
1.0 H
47 H
µ
1206
1206
1210
1812
2220
1212
2525
10 H
µ
LQM31F
LQH31C
LQH32C
LQH43C
LQH55D
LQH3KS
LQH66S
1.6
1.6
2.5
3.2
3.2
3.2
µ
0.12 H
100 H
µ
µ
0.15 H
560 H
µ
Chokes
Wound
4.5
µ
1.0 H
470µH
5.7
10000 H
µ
0.12 H
µ
Wound
5.0
3.3
3.3µ
H
µ
2200 H
Magnetically shielded
Magnetically shielded
3.3
6.3
6.3
µ
10000 H
0.27 H
µ
CAUTION : Use rosin-based flux, but not strong acidic flux (with chlorine content exceeding 0.2wt%) when soldering chip coil.
Do not use water-soluble flux.
4
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Selection Guide
Start
Operating Frequency
Less than 100MHz
Application
Greater than 100MHz
Choke
General
High Frequency
Wire Wound
1212
Multilayer
Wire Wound
Multilayer
Wire Wound
Film
Multilayer
0805
1206
0603
0402
0201
0402
LQH3KS_23/_53
LQM21D
LQH31M
LQM18N
LQW15A
LQP03T
LQG15H
3.3–2200µH 20–320mA
1.0–47µH 7–60mA
0.15–100µH
47–2200nH
1.3–120nH
0.6–27nH
1.0–270nH
1206
0805
1210
0805
0603
0402
0603
LQH31C
LQM21F
LQH32M
LQM21N
LQW18A
LQP15T
LQG18H
0.12–100µH 80–970mA 1.0–47µH 7–220mA
1.0–560µH
0.1–4.7µH
2.2–470nH
1.0–18nH
1.2–100nH
1210
1206
1812
0805
0402
Dimensions in inches
LQM31F
10µH 70mA
LQH43M(N)
1.0–2200µH
LQW2BH
2.7–470nH
LQP15M
1.0–33nH
LQH32C
(Standard type)
0.15–560µH 60–1450mA
1206
0603
1210
LQW31H
LQP18M
DC-DC Converter
LQH32C_53
(Low profile type)
8.8–100nH
1.3–100nH
1206
1.0–100µH 100–1000mA
Wire Wound
1812
0806
LQH31H
54–880nH
LQH2MC
LQH43C
4.7–82µH
1.0–470µH 90–1080mA
2220
LQH55D
0.12–10000µH 0.05–6.0A
2525
LQH66S
0.27–10000µH 0.05–6.0A
5
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
1
Chip Coils
High Frequency Monolithic Type LQG15H/LQG18H Series
LQG15HN Series
0.25±0.1
Polarity Marking
The LQG15HN series are chip inductors specifically
designed for high frequency applications.
The LQG15H series is designed to realize stable
characteristics in high frequency range applying
integrated multilayer process. The integrated
multilayer process enables a wide range of inductance
values with tight tolerance.
1.0±0.05
0.5±0.05
■ Features
1. High-Q, stable inductance in high frequency is
achieved by the original structure that minimizes
stray capacitance. It is suitable for the high
frequency circuits of mobile communication
equipment.
(in mm)
2. The small size of LQG15H (1.0x0.5x0.5mm) is
suitable for small and low profile mobile equipment.
3. The external electrodes with nickel barrier
structure provide excellent solder heat resistance.
4. Wide variation in inductance value
1-10nH (E24 step)
10-120nH (E12 step)
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQG15HN1N0S02
LQG15HN1N1S02
LQG15HN1N2S02
LQG15HN1N3S02
LQG15HN1N5S02
LQG15HN1N6S02
LQG15HN1N8S02
LQG15HN2N0S02
LQG15HN2N2S02
LQG15HN2N4S02
LQG15HN2N7S02
LQG15HN3N0S02
LQG15HN3N3S02
LQG15HN3N6S02
LQG15HN3N9S02
LQG15HN4N3S02
LQG15HN4N7S02
LQG15HN5N1S02
1.0 ±0.3nH
1.1 ±0.3nH
1.2 ±0.3nH
1.3 ±0.3nH
1.5 ±0.3nH
1.6 ±0.3nH
1.8 ±0.3nH
2.0 ±0.3nH
2.2 ±0.3nH
2.4 ±0.3nH
2.7 ±0.3nH
3.0 ±0.3nH
3.3 ±0.3nH
3.6 ±0.3nH
3.9 ±0.3nH
4.3 ±0.3nH
4.7 ±0.3nH
5.1 ±0.3nH
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
0.10 max.
0.10 max.
0.10 max.
0.10 max.
0.10 max.
0.10 max.
0.10 max.
0.12 max.
0.15 max.
0.16 max.
0.17 max.
0.18 max.
0.19 max.
0.19 max.
0.19 max.
0.21 max.
0.23 max.
0.24 max.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
Continued on the following page.
6
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
1
(nH)
LQG15HN5N6S02
LQG15HN6N2S02
LQG15HN6N8J02
LQG15HN7N5J02
LQG15HN8N2J02
LQG15HN9N1J02
LQG15HN10NJ02
LQG15HN12NJ02
LQG15HN15NJ02
LQG15HN18NJ02
LQG15HN22NJ02
LQG15HN27NJ02
LQG15HN33NJ02
LQG15HN39NJ02
LQG15HN47NJ02
LQG15HN56NJ02
LQG15HN68NJ02
LQG15HN82NJ02
LQG15HNR10J02
LQG15HNR12J02
5.6 ±0.3nH
6.2 ±0.3nH
6.8 ±5%
7.5 ±5%
8.2 ±5%
9.1 ±5%
10 ±5%
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±5%
39 ±5%
47 ±5%
56 ±5%
68 ±5%
82 ±5%
100 ±5%
120 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
300
300
300
300
300
300
300
300
300
300
300
300
200
200
200
200
180
150
150
150
0.26 max.
0.27 max.
0.29 max.
0.31 max.
0.33 max.
0.34 max.
0.35 max.
0.41 max.
0.46 max.
0.51 max.
0.58 max.
0.67 max.
0.67 max.
1.06 max.
1.15 max.
1.20 max.
1.25 max.
1.60 max.
1.60 max.
1.60 max.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
5300
4300
4200
3900
3600
3400
3200
2800
2300
2100
1800
1600
1500
1200
1000
800
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
800
600
600
600
Operating Temp. Range: -55°C to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
1000
100
80
120nH
68nH
1.5nH
33nH
12nH
100
10
1
4.7nH
60
Q
4.7nH
40
12nH
20
68nH
1.5nH
33nH
120nH
0
100
1000
Frequency (MHz)
10000
100
1000
Frequency (MHz)
10000
7
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
1
LQG15HS Series
0.25±0.1
Polarity Marking
The LQG15HS series are chip inductors specifically
designed for high frequency applications.
The LQG15H series is designed to realize stable
characteristics in high frequency range applying
integrated multilayer process. The integrated
multilayer process enables a wide range of inductance
values with tight tolerance.
1.0±0.05
0.5±0.05
Since recent mobile phones install color LCDs and camera
modules, the power consumption becomes higher.
In order to reduce power consumption a low DC
resistance is strongly required. The LQG15HS has
achieved the lowest DC resistance.
(in mm)
■ Features
1. High-Q, stable inductance in high frequency is
achieved by the original structure that minimizes
stray capacitance. It is suitable for the high
frequency circuits of mobile communication
equipment.
2. The small size of LQG15H (1.0x0.5x0.5mm) is
suitable for small and low profile mobile equipment.
3. The external electrodes with nickel barrier
structure provide excellent solder heat resistance.
4. Wide variation in inductance value
1-10nH (E24 step)
10-270nH (E12 step)
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
■ Supplements
The product with tight inductance tolerance.
Please contact our local sales or product engineers.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQG15HS1N0S02
LQG15HS1N1S02
LQG15HS1N2S02
LQG15HS1N3S02
LQG15HS1N5S02
LQG15HS1N6S02
LQG15HS1N8S02
LQG15HS2N0S02
LQG15HS2N2S02
LQG15HS2N4S02
LQG15HS2N7S02
LQG15HS3N0S02
LQG15HS3N3S02
LQG15HS3N6S02
LQG15HS3N9S02
1.0 ±0.3nH
1.1 ±0.3nH
1.2 ±0.3nH
1.3 ±0.3nH
1.5 ±0.3nH
1.6 ±0.3nH
1.8 ±0.3nH
2.0 ±0.3nH
2.2 ±0.3nH
2.4 ±0.3nH
2.7 ±0.3nH
3.0 ±0.3nH
3.3 ±0.3nH
3.6 ±0.3nH
3.9 ±0.3nH
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
0.07 max.
0.09 max.
0.09 max.
0.09 max.
0.1 max.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0.1 max.
0.1 max.
0.1 max.
0.12 max.
0.15 max.
0.15 max.
0.17 max.
0.17 max.
0.18 max.
0.18 max.
Continued on the following page.
8
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
1
(nH)
LQG15HS4N3S02
LQG15HS4N7S02
LQG15HS5N1S02
LQG15HS5N6S02
LQG15HS6N2S02
LQG15HS6N8J02
LQG15HS7N5J02
LQG15HS8N2J02
LQG15HS9N1J02
LQG15HS10NJ02
LQG15HS12NJ02
LQG15HS15NJ02
LQG15HS18NJ02
LQG15HS22NJ02
LQG15HS27NJ02
LQG15HS33NJ02
LQG15HS39NJ02
LQG15HS47NJ02
LQG15HS56NJ02
LQG15HS68NJ02
LQG15HS82NJ02
LQG15HSR10J02
LQG15HSR12J02
LQG15HSR15J02
LQG15HSR18J02
LQG15HSR22J02
LQG15HSR27J02
4.3 ±0.3nH
4.7 ±0.3nH
5.1 ±0.3nH
5.6 ±0.3nH
6.2 ±0.3nH
6.8 ±5%
7.5 ±5%
8.2 ±5%
9.1 ±5%
10 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
200
200
200
200
180
150
150
150
140
130
120
110
0.18 max.
0.18 max.
0.2 max.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
6000
6000
5300
4500
4500
4500
4200
3700
3400
3400
3000
2500
2200
1900
1700
1600
1200
1000
800
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0.2 max.
0.22 max.
0.24 max.
0.24 max.
0.24 max.
0.26 max.
0.26 max.
0.28 max.
0.32 max.
0.36 max.
0.42 max.
0.46 max.
0.58 max.
0.65 max.
0.72 max.
0.82 max.
0.92 max.
1.2 max.
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±5%
39 ±5%
47 ±5%
56 ±5%
68 ±5%
800
82 ±5%
700
100 ±5%
120 ±5%
150 ±5%
180 ±5%
220 ±5%
270 ±5%
1.25 max.
1.3 max.
600
600
2.99 max.
3.38 max.
3.77 max.
4.94 max.
550
500
450
400
Operating Temp. Range: -55°C to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
E4991A
1000
270nH
80
60
40
20
120nH
1.0nH
3.3nH
56nH
100
22nH
10nH
10
3.3nH
10nH
22nH
1.0nH
1
56nH
120nH
270nH
0
1
100
1000
Frequency (MHz)
10000
100
1000
10000
Frequency (MHz)
Continued on the following page.
9
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
■ Reference Data
1
E4991&16197A
Q (typ.)
1.8GHz
51
59
56
56
50
50
48
47
48
51
49
49
46
45
49
44
42
44
41
41
40
38
35
36
35
28
25
22
16
-
Inductance (nH)
Rdc
(Ω typ.)
SRF
(MHz typ.)
Part Number
100MHz
2.0GHz
54
62
58
57
53
52
49
48
49
52
50
51
47
47
47
45
43
45
40
41
40
37
34
35
33
24
21
18
-
2.4GHz
57
64
60
58
55
54
50
49
50
52
50
50
46
46
46
44
42
42
38
38
37
34
29
31
28
18
13
-
800MHz
32
35
34
34
31
31
31
31
32
32
31
32
31
31
31
31
31
31
30
29
29
28
27
27
27
26
26
25
23
21
20
19
17
15
12
9
900MHz
34
37
36
36
34
33
33
32
34
34
33
34
33
33
33
33
33
33
32
31
30
29
29
29
29
27
27
25
24
21
20
18
16
13
10
6
11700
10000
8600
7000
9700
8600
7500
6400
6200
10000
8700
8000
6700
8000
7500
6500
6200
5800
5000
5100
4900
4500
LQG15HS1N0S02
LQG15HS1N1S02
LQG15HS1N2S02
LQG15HS1N3S02
LQG15HS1N5S02
LQG15HS1N6S02
LQG15HS1N8S02
LQG15HS2N0S02
LQG15HS2N2S02
LQG15HS2N4S02
LQG15HS2N7S02
LQG15HS3N0S02
LQG15HS3N3S02
LQG15HS3N6S02
LQG15HS3N9S02
LQG15HS4N3S02
LQG15HS4N7S02
LQG15HS5N1S02
LQG15HS5N6S02
LQG15HS6N2S02
LQG15HS6N8J02
LQG15HS7N5J02
LQG15HS8N2J02
LQG15HS9N1J02
LQG15HS10NJ02
LQG15HS12NJ02
LQG15HS15NJ02
LQG15HS18NJ02
LQG15HS22NJ02
LQG15HS27NJ02
LQG15HS33NJ02
LQG15HS39NJ02
LQG15HS47NJ02
LQG15HS56NJ02
LQG15HS68NJ02
LQG15HS82NJ02
LQG15HSR10J02
LQG15HSR12J02
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
0.03
0.04
0.05
0.07
0.08
0.09
0.1
0.12
0.13
0.16
0.17
0.18
4100
3900
3200
2900
2800
2500
2000
1900
1700
1500
1300
1200
1100
900
12
0.22
0.26
0.30
0.33
0.40
0.44
0.48
0.55
0.63
0.77
0.92
1.00
15
18
-
22
-
-
27
-
-
-
33
-
-
-
39
-
-
-
47
-
-
-
56
-
-
-
68
-
-
-
82
-
-
-
-
-
100
120
-
-
800
-
-
-
10
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
1
LQG18H Series
0.3±0.2
The LQG18H series is designed to realize stable
characteristics in high frequency range applying
integrated multilayer process.
Polarity Marking
■ Features
1. High-Q, stable inductance in high frequency is
achieved by the original structure that
minimizes stray capacitance. It is suitable for
the high frequency circuits of mobile communication
equipment.
1.6±0.15
0.8±0.15
(in mm)
2. Small size of LQG18H (1.6x0.8x0.8mm) is suitable
for small, handy equipment, especially for card
size equipment.
3. The external electrodes with nickel barrier
structure provide excellent solder heat resistance.
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQG18HN1N2S00
LQG18HN1N5S00
LQG18HN1N8S00
LQG18HN2N2S00
LQG18HN2N7S00
LQG18HN3N3S00
LQG18HN3N9S00
LQG18HN4N7S00
LQG18HN5N6S00
LQG18HN6N8J00
LQG18HN8N2J00
LQG18HN10NJ00
LQG18HN12NJ00
LQG18HN15NJ00
LQG18HN18NJ00
LQG18HN22NJ00
LQG18HN27NJ00
LQG18HN33NJ00
LQG18HN39NJ00
LQG18HN47NJ00
LQG18HN56NJ00
LQG18HN68NJ00
LQG18HN82NJ00
LQG18HNR10J00
1.2 ±0.3nH
1.5 ±0.3nH
1.8 ±0.3nH
2.2 ±0.3nH
2.7 ±0.3nH
3.3 ±0.3nH
3.9 ±0.3nH
4.7 ±0.3nH
5.6 ±0.3nH
6.8 ±5%
8.2 ±5%
10 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
500
500
500
500
500
500
450
450
430
430
400
400
400
350
350
300
300
300
300
300
300
300
300
300
0.10 max.
0.10 max.
0.10 max.
0.10 max.
0.15 max.
0.15 max.
0.15 max.
0.20 max.
0.20 max.
0.25 max.
0.25 max.
0.30 max.
0.35 max.
0.40 max.
0.45 max.
0.50 max.
0.55 max.
0.60 max.
0.65 max.
0.70 max.
0.75 max.
0.80 max.
0.85 max.
0.90 max.
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
6000
6000
6000
6000
6000
6000
6000
6000
5000
5000
4000
3500
3000
2800
2600
2300
2000
1700
1500
1200
1100
1000
900
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±5%
39 ±5%
47 ±5%
56 ±5%
68 ±5%
82 ±5%
100 ±5%
800
Operating Temp. Range: -40°C to +85°C
Only for reflow soldering.
11
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
1
1000
200
160
120
80
68nH
3.3nH
10nH
100
10
10nH
40
3.3nH
68nH
1
0
100
100
1000
1000
Frequency (MHz)
10000
10000
Frequency (MHz)
12
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
High Frequency Film Type LQP03T/LQP15T/LQP15M/LQP18M Series
2
LQP03T Series
*Polarity Marking
Coloring side
Inductance : 1.0-3.9nH
4.3-15nH±3%
18-27nH
LQP03T series using Murata's original thin film
technology contributes further to miniaturizing high
performance equipment because the size is small
and the Q-value is high.
Coloring side
0.60±0.05
Polarity Marking
■ Features
1. Ultra small and thin size 0.6x0.3x0.3mm
2. High Q value in high frequency range
3. E24 step
0.6 to 3.9nH +-0.1nH
4.3 to 10nH +-3%
0.15±0.05
(in mm)
4. E12 step
0.6 to 3.9nH +-0.2nH
4.7 to 15nH +-5%
18 to 27nH +-3%, +-5%
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQP03TN0N6B00
LQP03TN0N6C00
LQP03TN0N7B00
LQP03TN0N8B00
LQP03TN0N8C00
LQP03TN0N9B00
LQP03TN1N0B00
LQP03TN1N0C00
LQP03TN1N1B00
LQP03TN1N2B00
LQP03TN1N2C00
LQP03TN1N3B00
LQP03TN1N5B00
LQP03TN1N5C00
LQP03TN1N6B00
LQP03TN1N8B00
LQP03TN1N8C00
LQP03TN2N0B00
LQP03TN2N2B00
LQP03TN2N2C00
LQP03TN2N4B00
LQP03TN2N7B00
LQP03TN2N7C00
LQP03TN3N0B00
0.6 ±0.1nH
0.6 ±0.2nH
0.7 ±0.1nH
0.8 ±0.1nH
0.8 ±0.2nH
0.9 ±0.1nH
1.0 ±0.1nH
1.0 ±0.2nH
1.1 ±0.1nH
1.2 ±0.1nH
1.2 ±0.2nH
1.3 ±0.1nH
1.5 ±0.1nH
1.5 ±0.2nH
1.6 ±0.1nH
1.8 ±0.1nH
1.8 ±0.2nH
2.0 ±0.1nH
2.2 ±0.1nH
2.2 ±0.2nH
2.4 ±0.1nH
2.7 ±0.1nH
2.7 ±0.2nH
3.0 ±0.1nH
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
420
420
410
410
410
400
400
400
280
280
280
280
280
280
280
280
280
220
220
220
220
220
220
190
0.08 max.
0.08 max.
0.09 max.
0.09 max.
0.09 max.
0.10 max.
0.10 max.
0.10 max.
0.13 max.
0.13 max.
0.13 max.
0.16 max.
0.16 max.
0.16 max.
0.16 max.
0.16 max.
0.16 max.
0.18 max.
0.18 max.
0.18 max.
0.21 max.
0.21 max.
0.21 max.
0.30 max.
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
Continued on the following page.
13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQP03TN3N3B00
LQP03TN3N3C00
LQP03TN3N6B00
LQP03TN3N9B00
LQP03TN3N9C00
LQP03TN4N3H00
LQP03TN4N7H00
LQP03TN4N7J00
LQP03TN5N1H00
LQP03TN5N6H00
LQP03TN5N6J00
LQP03TN6N2H00
LQP03TN6N8H00
LQP03TN6N8J00
LQP03TN7N5H00
LQP03TN8N2H00
LQP03TN8N2J00
LQP03TN9N1H00
LQP03TN10NH00
LQP03TN10NJ00
LQP03TN12NH00
LQP03TN12NJ00
LQP03TN15NH00
LQP03TN15NJ00
LQP03TN18NH00
LQP03TN18NJ00
LQP03TN22NH00
LQP03TN22NJ00
LQP03TN27NH00
LQP03TN27NJ00
3.3 ±0.1nH
3.3 ±0.2nH
3.6 ±0.1nH
3.9 ±0.1nH
3.9 ±0.2nH
4.3 ±3%
4.7 ±3%
4.7 ±5%
5.1 ±3%
5.6 ±3%
5.6 ±5%
6.2 ±3%
6.8 ±3%
6.8 ±5%
7.5 ±3%
8.2 ±3%
8.2 ±5%
9.1 ±3%
10 ±3%
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
190
190
170
170
170
160
160
160
140
140
140
130
130
130
110
110
110
100
100
100
90
0.30 max.
0.30 max.
0.45 max.
0.45 max.
0.45 max.
0.55 max.
0.55 max.
0.55 max.
0.68 max.
0.68 max.
0.68 max.
0.75 max.
0.75 max.
0.75 max.
0.86 max.
0.86 max.
0.86 max.
1.10 max.
1.10 max.
1.10 max.
1.25 max.
1.25 max.
1.50 max.
1.50 max.
2.00 max.
2.00 max.
2.60 max.
2.60 max.
3.10 max.
3.10 max.
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
5500
5500
5500
4500
4500
4500
3700
3700
3300
3300
3100
3100
2800
2800
2500
2500
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
0201
2
10 ±5%
12 ±3%
12 ±5%
90
15 ±3%
90
15 ±5%
90
18 ±3%
80
18 ±5%
80
22 ±3%
70
22 ±5%
70
27 ±3%
70
27 ±5%
70
Operating Temp. Range: -40°C to +85°C
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
E4991A 16197A
E4991A 16197A
1.5nH
80
60
1000
100
10
27nH
3.9nH
15nH
Q
40
10nH
6.8nH
3.9nH
6.8nH
10nH
20
15nH
27nH
1.5nH
1
0
100
100
1000
10000
1000
10000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
14
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
■ Reference Data
E4991A & 16197A
Inductance (nH) (typ.)
900MHz 2.0GHz
Q (Typ.)
1.8GHz
70 min.
70 min.
70 min.
70 min.
70 min.
70 min.
70
Part Number
800MHz
1.8GHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.8
5.2
5.8
6.5
7.1
7.9
8.6
9.9
11
2.4GHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.4
3.7
4.1
4.5
5.1
5.5
6.1
6.9
7.7
8.7
9.6
11
800MHz
50 min.
50 min.
50 min.
50 min.
50 min.
50 min.
50
900MHz
54 min.
54 min.
54 min.
54 min.
54 min.
54 min.
54
2.0GHz
2.4GHz
LQP03TN0N6
LQP03TN0N7
LQP03TN0N8
LQP03TN0N9
LQP03TN1N0
LQP03TN1N1
LQP03TN1N2
LQP03TN1N3
LQP03TN1N5
LQP03TN1N6
LQP03TN1N8
LQP03TN2N0
LQP03TN2N2
LQP03TN2N4
LQP03TN2N7
LQP03TN3N0
LQP03TN3N3
LQP03TN3N6
LQP03TN3N9
LQP03TN4N3
LQP03TN4N7
LQP03TN5N1
LQP03TN5N6
LQP03TN6N2
LQP03TN6N8
LQP03TN7N5
LQP03TN8N2
LQP03TN9N1
LQP03TN10N
LQP03TN12N
LQP03TN15N
LQP03TN18N
LQP03TN22N
LQP03TN27N
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.7
4.0
4.4
4.9
5.3
5.9
6.6
7.4
8.2
9.1
10
73 min.
73 min.
73 min.
73 min.
73 min.
73 min.
73
77 min.
77 min.
77 min.
77 min.
77 min.
77 min.
77
2
48
52
67
72
74
45
48
63
66
69
43
47
57
64
67
36
38
50
53
55
38
40
52
54
57
28
35
49
52
54
36
38
50
53
56
28
30
40
42
44
28
29
39
41
43
29
31
42
43
45
31
33
43
45
47
29
31
41
43
45
28
30
40
42
44
28
30
40
42
43
26
28
37
39
40
22
24
32
33
33
20
21
27
28
28
21
22
29
30
30
21
22
28
30
29
18
19
25
25
24
20
21
26
26
25
12
13
21
22
28
28
27
12
12
13
14
16
21
22
27
27
25
15
15
18
19
23
21
21
25
24
22
18
18
24
-
-
18
19
20
-
-
22
23
32
-
-
16
17
16
-
-
28
29
47
-
-
15
15
13
-
-
15
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQP15T Series
Polarity Marking
The LQP15T series offers High Q value, tight
inductance tolerance with small/thin package using
Murata's original film engineering technology.
2
1.00±0.05
■ Features
1. High Q value
2. Tight inductance tolerance (+-0.1nH, +-0.2nH, +-3%)
3. Ultra small and tight size (1005 size, height 0.4mm)
4. Low DC resistance
(in mm)
0.25±0.1
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQP15TN1N0B02
LQP15TN1N0C02
LQP15TN1N1B02
LQP15TN1N1C02
LQP15TN1N2B02
LQP15TN1N2C02
LQP15TN1N3B02
LQP15TN1N3C02
LQP15TN1N5B02
LQP15TN1N5C02
LQP15TN1N6B02
LQP15TN1N6C02
LQP15TN1N8B02
LQP15TN1N8C02
LQP15TN2N0C02
LQP15TN2N2C02
LQP15TN2N4C02
LQP15TN2N7C02
LQP15TN3N0C02
LQP15TN3N3C02
LQP15TN3N6C02
LQP15TN3N9C02
LQP15TN4N7C02
LQP15TN5N6C02
LQP15TN6N8H02
LQP15TN8N2H02
LQP15TN10NH02
LQP15TN12NH02
LQP15TN15NH02
LQP15TN18NH02
1.0 ±0.1nH
1.0 ±0.2nH
1.1 ±0.1nH
1.1 ±0.2nH
1.2 ±0.1nH
1.2 ±0.2nH
1.3 ±0.1nH
1.3 ±0.2nH
1.5 ±0.1nH
1.5 ±0.2nH
1.6 ±0.1nH
1.6 ±0.2nH
1.8 ±0.1nH
1.8 ±0.2nH
2.0 ±0.2nH
2.2 ±0.2nH
2.4 ±0.2nH
2.7 ±0.2nH
3.0 ±0.2nH
3.3 ±0.2nH
3.6 ±0.2nH
3.9 ±0.2nH
4.7 ±0.2nH
5.6 ±0.2nH
6.8 ±3%
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
300
300
300
250
250
250
250
220
220
220
220
190
190
170
170
160
140
130
110
100
90
0.1 max.
0.1 max.
0.1 max.
0.1 max.
0.1 max.
0.1 max.
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.2 max.
0.2 max.
0.2 max.
0.2 max.
0.3 max.
0.3 max.
0.4 max.
0.4 max.
0.5 max.
0.6 max.
0.7 max.
0.8 max.
1.0 max.
1.0 max.
1.3 max.
1.5 max.
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
5500
5500
5500
5500
5000
4500
3500
3000
2500
2500
2000
1500
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
8.2 ±3%
10 ±3%
12 ±3%
15 ±3%
90
18 ±3%
80
Operating Temp. Range: -40°C to +85°C
Only for reflow soldering.
16
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
80
50
40
2.0nH
3.9nH
18nH
60
2
30
8.2nH
Q
40
20
0
12nH
12nH
18nH
20
8.2nH
10
0
3.9nH
2.0nH
10
100
1000
10000
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
17
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQP15M Series
■ Features
1. Tight inductance tolerance (+-0.05nH, +-0.1nH, +-2%)
realized by Murata's original film technology.
Various inductance values enable assembly with
no tuning.
2
1.0±0.1
2. Ultra small size 0402 inductor which is low profile
and lightest weight in the world enables
miniaturizing of mobile telecommunications equipment.
LQP15M series weights 0.6mg/pc. while multilayer
type inductor weights 0.9mg/pc.
0.25±0.1
(in mm)
3. High Q at high frequency range.
4. High self resonant frequency due to low stray
capacitance and narrow inductance distribution
provides stable inductance in high frequency
circuits such as telecommunications equipment.
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQP15MN1N0B02
LQP15MN1N0W02
LQP15MN1N1B02
LQP15MN1N1W02
LQP15MN1N2B02
LQP15MN1N2W02
LQP15MN1N3B02
LQP15MN1N3W02
LQP15MN1N4W02
LQP15MN1N5B02
LQP15MN1N5W02
LQP15MN1N6B02
LQP15MN1N6W02
LQP15MN1N7W02
LQP15MN1N8B02
LQP15MN1N8W02
LQP15MN1N9W02
LQP15MN2N0B02
LQP15MN2N0W02
LQP15MN2N1W02
LQP15MN2N2B02
LQP15MN2N2W02
LQP15MN2N3W02
LQP15MN2N4B02
LQP15MN2N4W02
LQP15MN2N5W02
LQP15MN2N6W02
LQP15MN2N7B02
LQP15MN2N7W02
LQP15MN2N8W02
1.0 ±0.1nH
1.0 ±0.05nH
1.1 ±0.1nH
1.1 ±0.05nH
1.2 ±0.1nH
1.2 ±0.05nH
1.3 ±0.1nH
1.3 ±0.05nH
1.4 ±0.05nH
1.5 ±0.1nH
1.5 ±0.05nH
1.6 ±0.1nH
1.6 ±0.05nH
1.7 ±0.05nH
1.8 ±0.1nH
1.8 ±0.05nH
1.9 ±0.05nH
2.0 ±0.1nH
2.0 ±0.05nH
2.1 ±0.05nH
2.2 ±0.1nH
2.2 ±0.05nH
2.3 ±0.05nH
2.4 ±0.1nH
2.4 ±0.05nH
2.5 ±0.05nH
2.6 ±0.05nH
2.7 ±0.1nH
2.7 ±0.05nH
2.8 ±0.05nH
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
400
400
390
390
390
390
280
280
280
280
280
220
220
280
280
280
220
220
220
220
220
220
220
220
220
220
220
220
220
190
0.1 max.
0.1 max.
0.1 max.
0.1 max.
0.1 max.
0.1 max.
0.2 max.
0.2 max.
0.2 max.
0.2 max.
0.2 max.
0.3 max.
0.3 max.
0.2 max.
0.2 max.
0.2 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.4 max.
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
Continued on the following page.
18
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQP15MN2N9W02
LQP15MN3N0B02
LQP15MN3N0W02
LQP15MN3N1W02
LQP15MN3N2W02
LQP15MN3N3B02
LQP15MN3N3W02
LQP15MN3N4W02
LQP15MN3N5W02
LQP15MN3N6B02
LQP15MN3N6W02
LQP15MN3N7W02
LQP15MN3N8W02
LQP15MN3N9B02
LQP15MN3N9W02
LQP15MN4N3B02
LQP15MN4N7B02
LQP15MN5N1B02
LQP15MN5N6B02
LQP15MN6N2B02
LQP15MN6N8B02
LQP15MN7N5B02
LQP15MN8N2B02
LQP15MN9N1B02
LQP15MN10NG02
LQP15MN12NG02
LQP15MN15NG02
LQP15MN18NG02
LQP15MN22NG02
LQP15MN27NG02
LQP15MN33NG02
2.9 ±0.05nH
3.0 ±0.1nH
3.0 ±0.05nH
3.1 ±0.05nH
3.2 ±0.05nH
3.3 ±0.1nH
3.3 ±0.05nH
3.4 ±0.05nH
3.5 ±0.05nH
3.6 ±0.1nH
3.6 ±0.05nH
3.7 ±0.05nH
3.8 ±0.05nH
3.9 ±0.1nH
3.9 ±0.05nH
4.3 ±0.1nH
4.7 ±0.1nH
5.1 ±0.1nH
5.6 ±0.1nH
6.2 ±0.1nH
6.8 ±0.1nH
7.5 ±0.1nH
8.2 ±0.1nH
9.1 ±0.1nH
10 ±2%
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
190
190
190
190
190
190
190
170
170
170
170
170
170
170
170
160
160
140
140
130
130
110
110
100
100
90
0.4 max.
0.4 max.
0.4 max.
0.4 max.
0.4 max.
0.4 max.
0.4 max.
0.5 max.
0.5 max.
0.5 max.
0.5 max.
0.5 max.
0.5 max.
0.5 max.
0.5 max.
0.6 max.
0.6 max.
0.7 max.
0.7 max.
0.9 max.
0.9 max.
1.1 max.
1.1 max.
1.3 max.
1.3 max.
1.6 max.
1.8 max.
2.0 max.
2.6 max.
3.1 max.
3.8 max.
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
5500
5500
4500
4500
3700
3300
3100
2800
2500
2100
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
2
12 ±2%
15 ±2%
90
18 ±2%
80
22 ±2%
70
27 ±2%
70
33 ±2%
60
Operating Temp. Range: -40°C to +85°C
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
100
80
100
33nH
2.2nH
15nH
60
Q
8.2nH
10
4.7nH
8.2nH
40
20
0
4.7nH
2.2nH
15nH
33nH
100
1000
10000
1
1000
10000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
19
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
■ Reference Data
E4991A+16197A
Inductance (nH) (Typ.)
900MHz 2.0GHz
Q (Typ.)
1.8GHz
73
70
69
56
51
49
37
48
46
46
47
47
48
47
47
47
47
48
47
44
41
39
35
38
37
37
35
35
38
37
38
38
36
32
32
33
32
32
31
30
29
26
24
22
21
-
Part Number
800MHz
1.8GHz
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.3
4.8
5.2
5.8
6.5
7.1
7.9
8.7
9.8
11
2.4GHz
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.5
5.1
5.5
6.2
6.9
7.7
8.6
9.5
11
800MHz
50
44
43
39
39
38
26
37
35
34
34
35
36
36
35
35
35
35
35
33
29
28
27
28
28
28
27
27
28
28
28
28
26
23
23
24
24
24
23
24
25
23
22
22
22
21
900MHz
55
47
47
43
41
40
28
40
37
36
36
37
38
38
37
37
37
37
37
35
31
29
28
29
29
29
28
28
29
29
30
29
28
25
25
26
25
25
25
26
26
25
23
23
23
22
2.0GHz
2.4GHz
85
83
82
65
58
54
42
53
52
52
53
53
56
53
52
53
52
53
53
49
48
45
38
43
41
40
41
41
42
41
42
41
40
34
34
35
34
34
33
31
28
25
-
LQP15MN1N0
LQP15MN1N1
LQP15MN1N2
LQP15MN1N3
LQP15MN1N4
LQP15MN1N5
LQP15MN1N6
LQP15MN1N7
LQP15MN1N8
LQP15MN1N9
LQP15MN2N0
LQP15MN2N1
LQP15MN2N2
LQP15MN2N3
LQP15MN2N4
LQP15MN2N5
LQP15MN2N6
LQP15MN2N7
LQP15MN2N8
LQP15MN2N9
LQP15MN3N0
LQP15MN3N1
LQP15MN3N2
LQP15MN3N3
LQP15MN3N4
LQP15MN3N5
LQP15MN3N6
LQP15MN3N7
LQP15MN3N8
LQP15MN3N9
LQP15MN4N3
LQP15MN4N7
LQP15MN5N1
LQP15MN5N6
LQP15MN6N2
LQP15MN6N8
LQP15MN7N5
LQP15MN8N2
LQP15MN9N1
LQP15MN10N
LQP15MN12N
LQP15MN15N
LQP15MN18N
LQP15MN22N
LQP15MN27N
LQP15MN33N
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.7
3.8
3.9
4.0
4.4
4.9
5.3
6.0
6.6
7.4
8.2
9.0
10
76
76
76
60
54
51
39
49
49
49
50
49
51
49
49
49
49
49
49
46
44
42
36
39
39
38
39
38
39
38
40
39
38
33
33
34
33
33
32
31
29
27
-
2
12
13
12
12
13
14
16
15
15
18
19
23
18
18
23
-
-
22
23
29
-
-
-
-
28
28
38
-
-
-
-
34
35
-
-
-
-
-
20
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQP18M Series
■ Features
1. Tight inductance tolerance (+-0.2nH, +-2%) realized
by Murata's original film technology. Various
inductance values enable assembly with no tuning.
2. Small size of LQP18M series is suitable for small
hand held equipment, especially for card size
equipment.
2
1.6±0.15
0.2 min.
3. High Q at high frequency range
4. High self resonant frequency due to low stray
capacitance and narrow inductance distribution
provides stable inductance in high frequency
circuits such as telecommunications equipment.
(in mm)
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQP18MN1N3C02
LQP18MN1N5C02
LQP18MN1N8C02
LQP18MN2N2C02
LQP18MN2N7C02
LQP18MN3N3C02
LQP18MN3N9C02
LQP18MN4N7C02
LQP18MN5N6C02
LQP18MN6N8C02
LQP18MN8N2C02
LQP18MN10NG02
LQP18MN12NG02
LQP18MN15NG02
LQP18MN18NG02
LQP18MN22NG02
LQP18MN27NG02
LQP18MN33NG02
LQP18MN39NG02
LQP18MN47NG02
LQP18MN56NG02
LQP18MN68NG02
LQP18MN82NG02
LQP18MNR10G02
1.3 ±0.2nH
1.5 ±0.2nH
1.8 ±0.2nH
2.2 ±0.2nH
2.7 ±0.2nH
3.3 ±0.2nH
3.9 ±0.2nH
4.7 ±0.2nH
5.6 ±0.2nH
6.8 ±0.2nH
8.2 ±0.2nH
10 ±2%
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
250
250
250
250
200
200
200
200
150
150
150
150
100
100
100
100
100
100
50
0.3 max.
0.3 max.
0.4 max.
0.4 max.
0.4 max.
0.4 max.
0.5 max.
0.5 max.
0.6 max.
0.7 max.
0.8 max.
1.0 max.
1.0 max.
1.3 max.
1.5 max.
1.9 max.
2.4 max.
2.8 max.
2.8 max.
2.2 max.
3.4 max.
3.5 max.
4.6 max.
6.1 max.
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
6000
6000
6000
6000
6000
6000
5900
5200
4700
4300
3600
3400
3000
2700
2300
2100
1900
1700
1400
1200
1000
900
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
12 ±2%
15 ±2%
18 ±2%
22 ±2%
27 ±2%
33 ±2%
39 ±2%
47 ±2%
56 ±2%
68 ±2%
50
82 ±2%
50
800
100 ±2%
50
700
Operating Temp. Range: -40°C to +85°C
Only for reflow soldering.
21
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
200
1000
100nH
1.5nH
3.3nH
68nH
33nH
160
2
15nH
100
120
Q
6.8nH
80
10
6.8nH
40
3.3nH
1.5nH
33nH
68nH
15nH
100nH
0
100
1
100
1000
Frequency (MHz)
1000
10000
10000
Frequency (MHz)
22
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
High Frequency Wound Type LQW15A/LQW18A Series
LQW15A_00 Series
3
The LQW15A series consists of air core chip coil
using a miniature alumina core.
The tight inductance tolerance (+-0.2nH, +-3%) is
0.5±0.1
1.0±0.1
available due to Murata's original wound technology.
W
The LQW15A series has high Q value in high frequency
range and high self resonant frequency. It is suitable
for high frequency circuits which are used in
telecommunications equipment.
W
Inductance (nH)
0.6±0.1 1.5-23, 100, 120
0.5±0.1 24-91
0.2±0.1
0.2±0.1
■ Features
(in mm)
1. Horizontal wound structure enables tight
inductance tolerance (+-0.2nH, +-3%)
And tolerance of +-0.1nH, +-2% is available.
2. Wide variation in inductance value.
3. The subminiature dimensions (1.0x0.5mm) allow high
density mounting.
4. The high self resonant frequency realizes high Q
value and stable inductance at high frequency.
5. Low DC resistance design is ideal for low loss, high
output and low power consumption.
6. Resin-coated surface enables excellent mounting.
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(GHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQW15AN1N5B00
LQW15AN1N5C00
LQW15AN1N5D00
LQW15AN2N4B00
LQW15AN2N4C00
LQW15AN2N4D00
LQW15AN2N5B00
LQW15AN2N5C00
LQW15AN2N5D00
LQW15AN2N7B00
LQW15AN2N7C00
LQW15AN2N7D00
LQW15AN2N9B00
LQW15AN2N9C00
LQW15AN2N9D00
LQW15AN3N9B00
LQW15AN3N9C00
LQW15AN3N9D00
1.5 ±0.1nH
1.5 ±0.2nH
1.5 ±0.5nH
2.4 ±0.1nH
2.4 ±0.2nH
2.4 ±0.5nH
2.5 ±0.1nH
2.5 ±0.2nH
2.5 ±0.5nH
2.7 ±0.1nH
2.7 ±0.2nH
2.7 ±0.5nH
2.9 ±0.1nH
2.9 ±0.2nH
2.9 ±0.5nH
3.9 ±0.1nH
3.9 ±0.2nH
3.9 ±0.5nH
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1000
1000
1000
850
850
850
850
850
850
850
850
850
750
750
750
750
750
750
0.03 max.
0.03 max.
0.03 max.
0.05 max.
0.05 max.
0.05 max.
0.05 max.
0.05 max.
0.05 max.
0.05 max.
0.05 max.
0.05 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
10
10
10
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
18.0
18.0
18.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
10.0
10.0
10.0
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
Continued on the following page.
23
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(GHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQW15AN4N1B00
LQW15AN4N1C00
LQW15AN4N1D00
LQW15AN4N3B00
LQW15AN4N3C00
LQW15AN4N3D00
LQW15AN4N7B00
LQW15AN4N7C00
LQW15AN4N7D00
LQW15AN5N1B00
LQW15AN5N1C00
LQW15AN5N1D00
LQW15AN5N8B00
LQW15AN5N8C00
LQW15AN5N8D00
LQW15AN6N2B00
LQW15AN6N2C00
LQW15AN6N2D00
LQW15AN6N8G00
LQW15AN6N8H00
LQW15AN6N8J00
LQW15AN7N3G00
LQW15AN7N3H00
LQW15AN7N3J00
LQW15AN7N5G00
LQW15AN7N5H00
LQW15AN7N5J00
LQW15AN8N2G00
LQW15AN8N2H00
LQW15AN8N2J00
LQW15AN8N7G00
LQW15AN8N7H00
LQW15AN8N7J00
LQW15AN9N1G00
LQW15AN9N1H00
LQW15AN9N1J00
LQW15AN9N5G00
LQW15AN9N5H00
LQW15AN9N5J00
LQW15AN10NG00
LQW15AN10NH00
LQW15AN10NJ00
LQW15AN11NG00
LQW15AN11NH00
LQW15AN11NJ00
LQW15AN12NG00
LQW15AN12NH00
LQW15AN12NJ00
LQW15AN13NG00
LQW15AN13NH00
LQW15AN13NJ00
LQW15AN15NG00
LQW15AN15NH00
LQW15AN15NJ00
LQW15AN16NG00
LQW15AN16NH00
LQW15AN16NJ00
4.1 ±0.1nH
4.1 ±0.2nH
4.1 ±0.5nH
4.3 ±0.1nH
4.3 ±0.2nH
4.3 ±0.5nH
4.7 ±0.1nH
4.7 ±0.2nH
4.7 ±0.5nH
5.1 ±0.1nH
5.1 ±0.2nH
5.1 ±0.5nH
5.8 ±0.1nH
5.8 ±0.2nH
5.8 ±0.5nH
6.2 ±0.1nH
6.2 ±0.2nH
6.2 ±0.5nH
6.8 ±2%
6.8 ±3%
6.8 ±5%
7.3 ±2%
7.3 ±3%
7.3 ±5%
7.5 ±2%
7.5 ±3%
7.5 ±5%
8.2 ±2%
8.2 ±3%
8.2 ±5%
8.7 ±2%
8.7 ±3%
8.7 ±5%
9.1 ±2%
9.1 ±3%
9.1 ±5%
9.5 ±2%
9.5 ±3%
9.5 ±5%
10 ±2%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
750
750
750
750
750
750
750
750
750
600
600
600
700
700
700
700
700
700
700
700
700
570
570
570
570
570
570
540
540
540
540
540
540
540
540
540
540
540
540
500
500
500
500
500
500
500
500
500
430
430
430
460
460
460
370
370
370
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.07 max.
0.12 max.
0.12 max.
0.12 max.
0.12 max.
0.12 max.
0.12 max.
0.09 max.
0.09 max.
0.09 max.
0.09 max.
0.09 max.
0.09 max.
0.13 max.
0.13 max.
0.13 max.
0.13 max.
0.13 max.
0.13 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.17 max.
0.17 max.
0.17 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.14 max.
0.21 max.
0.21 max.
0.21 max.
0.16 max.
0.16 max.
0.16 max.
0.24 max.
0.24 max.
0.24 max.
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
25
25
25
30
30
30
25
25
25
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
10.0
10.0
10.0
10.0
10.0
10.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.0
5.0
5.0
5.0
5.0
5.0
4.5
4.5
4.5
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
3
10 ±3%
10 ±5%
11 ±2%
11 ±3%
11 ±5%
12 ±2%
12 ±3%
12 ±5%
13 ±2%
13 ±3%
13 ±5%
15 ±2%
15 ±3%
15 ±5%
16 ±2%
16 ±3%
16 ±5%
Continued on the following page.
24
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(GHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQW15AN18NG00
LQW15AN18NH00
LQW15AN18NJ00
LQW15AN19NG00
LQW15AN19NH00
LQW15AN19NJ00
LQW15AN20NG00
LQW15AN20NH00
LQW15AN20NJ00
LQW15AN22NG00
LQW15AN22NH00
LQW15AN22NJ00
LQW15AN23NG00
LQW15AN23NH00
LQW15AN23NJ00
LQW15AN24NG00
LQW15AN24NH00
LQW15AN24NJ00
LQW15AN27NG00
LQW15AN27NH00
LQW15AN27NJ00
LQW15AN30NG00
LQW15AN30NH00
LQW15AN30NJ00
LQW15AN33NG00
LQW15AN33NH00
LQW15AN33NJ00
LQW15AN36NG00
LQW15AN36NH00
LQW15AN36NJ00
LQW15AN39NG00
LQW15AN39NH00
LQW15AN39NJ00
LQW15AN40NG00
LQW15AN40NH00
LQW15AN40NJ00
LQW15AN43NG00
LQW15AN43NH00
LQW15AN43NJ00
LQW15AN47NG00
LQW15AN47NH00
LQW15AN47NJ00
LQW15AN51NG00
LQW15AN51NH00
LQW15AN51NJ00
LQW15AN56NG00
LQW15AN56NH00
LQW15AN56NJ00
LQW15AN62NG00
LQW15AN62NH00
LQW15AN62NJ00
LQW15AN68NG00
LQW15AN68NJ00
LQW15AN72NG00
LQW15AN72NJ00
LQW15AN75NG00
LQW15AN75NJ00
18 ±2%
18 ±3%
18 ±5%
19 ±2%
19 ±3%
19 ±5%
20 ±2%
20 ±3%
20 ±5%
22 ±2%
22 ±3%
22 ±5%
23 ±2%
23 ±3%
23 ±5%
24 ±2%
24 ±3%
24 ±5%
27 ±2%
27 ±3%
27 ±5%
30 ±2%
30 ±3%
30 ±5%
33 ±2%
33 ±3%
33 ±5%
36 ±2%
36 ±3%
36 ±5%
39 ±2%
39 ±3%
39 ±5%
40 ±2%
40 ±3%
40 ±5%
43 ±2%
43 ±3%
43 ±5%
47 ±2%
47 ±3%
47 ±5%
51 ±2%
51 ±3%
51 ±5%
56 ±2%
56 ±3%
56 ±5%
62 ±2%
62 ±3%
62 ±5%
68 ±2%
68 ±5%
72 ±2%
72 ±5%
75 ±2%
75 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
370
370
370
370
370
370
370
370
370
310
310
310
310
310
310
280
280
280
280
280
280
270
270
270
260
260
260
260
260
260
250
250
250
250
250
250
250
250
250
210
210
210
210
210
210
200
200
200
145
145
145
140
140
135
135
135
135
0.27 max.
0.27 max.
0.27 max.
0.27 max.
0.27 max.
0.27 max.
0.27 max.
0.27 max.
0.27 max.
0.30 max.
0.30 max.
0.30 max.
0.30 max.
0.30 max.
0.30 max.
0.52 max.
0.52 max.
0.52 max.
0.52 max.
0.52 max.
0.52 max.
0.58 max.
0.58 max.
0.58 max.
0.63 max.
0.63 max.
0.63 max.
0.63 max.
0.63 max.
0.63 max.
0.70 max.
0.70 max.
0.70 max.
0.70 max.
0.70 max.
0.70 max.
0.70 max.
0.70 max.
0.70 max.
1.08 max.
1.08 max.
1.08 max.
1.08 max.
1.08 max.
1.08 max.
1.17 max.
1.17 max.
1.17 max.
1.82 max.
1.82 max.
1.82 max.
1.96 max.
1.96 max.
2.10 max.
2.10 max.
2.10 max.
2.10 max.
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
20
20
20
20
20
20
20
20
20
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
150
150
150
4.5
4.5
4.5
4.5
4.5
4.5
4.0
4.0
4.0
4.0
4.0
4.0
3.8
3.8
3.8
3.5
3.5
3.5
3.5
3.5
3.5
3.3
3.3
3.3
3.2
3.2
3.2
3.1
3.1
3.1
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
2.9
2.9
2.9
2.85
2.85
2.85
2.8
2.8
2.8
2.6
2.6
2.6
2.5
2.5
2.5
2.5
2.4
2.4
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
3
Continued on the following page.
25
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(GHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQW15AN82NG00
LQW15AN82NJ00
LQW15AN91NG00
LQW15AN91NJ00
LQW15ANR10J00
LQW15ANR12J00
82 ±2%
82 ±5%
91 ±2%
91 ±5%
100 ±5%
120 ±5%
100
100
100
100
100
100
130
130
125
125
120
110
2.24 max.
2.24 max.
2.38 max.
2.38 max.
2.52 max.
2.66 max.
20
20
20
20
20
20
150
150
150
150
150
150
2.3
2.3
2.1
2.1
1.5
1.0
0402
0402
0402
0402
0402
0402
Operating Temp. Range: -55°C to +125°C
3
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
150
1000
120nH
82nH
4.7nH
100
50
100
56nH
27nH
10nH
27nH
10nH
10
82nH
56nH
4.7nH
120nH
1
10
0
10
100
1000
10000
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
26
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
■ Reference Data
LQW15AN_00
E4991A & 16197A
Inductance (nH)
Q (Typ.)
1.5GHz
65
80
88
85
75
82
82
90
85
78
85
80
90
75
75
80
80
85
85
75
90
80
70
80
80
80
78
78
73
73
48
60
65
60
48
62
62
62
60
60
50
-
Part Number
300MHz
30
40
40
40
33
35
35
35
40
35
40
40
45
38
38
40
40
40
40
38
40
40
40
40
40
40
37
37
35
35
35
35
35
35
35
35
35
35
34
34
36
33
35
33
33
35
35
30
28
800MHz
55
65
65
67
53
58
58
58
65
60
63
63
70
58
58
62
60
62
62
60
65
60
60
60
60
63
57
57
55
55
50
55
55
55
52
55
55
55
52
52
53
51
49
49
49
49
52
43
30
900MHz
60
67
67
73
58
61
61
61
67
65
67
65
72
63
63
67
62
68
68
65
70
62
62
65
63
65
62
62
58
58
50
56
58
56
52
56
56
56
54
54
55
52
52
52
52
50
53
43
23
Nominal
1.8GHz
90
98
90
100
80
88
88
88
88
85
88
90
96
88
88
90
85
90
90
82
105
85
72
85
90
88
80
80
75
75
42
58
68
53
42
-
2.0GHz
100
108
100
105
85
92
92
92
92
90
92
95
100
90
90
95
90
92
92
85
110
90
71
88
100
87
82
82
78
78
-
2.4GHz
LQW15AN1N5
LQW15AN2N4
LQW15AN2N5
LQW15AN2N7
LQW15AN2N9
LQW15AN3N9
LQW15AN4N1
LQW15AN4N3
LQW15AN4N7
LQW15AN5N1
LQW15AN5N8
LQW15AN6N2
LQW15AN6N8
LQW15AN7N3
LQW15AN7N5
LQW15AN8N2
LQW15AN8N7
LQW15AN9N1
LQW15AN9N5
LQW15AN10N
LQW15AN11N
LQW15AN12N
LQW15AN13N
LQW15AN15N
LQW15AN16N
LQW15AN18N
LQW15AN19N
LQW15AN20N
LQW15AN22N
LQW15AN23N
LQW15AN24N
LQW15AN27N
LQW15AN30N
LQW15AN33N
LQW15AN36N
LQW15AN39N
LQW15AN40N
LQW15AN43N
LQW15AN47N
LQW15AN51N
LQW15AN56N
LQW15AN62N
LQW15AN68N
LQW15AN72N
LQW15AN75N
LQW15AN82N
LQW15AN91N
LQW15ANR10
LQW15ANR12
1.5
2.4
2.5
2.7
2.9
3.9
4.1
4.3
4.7
5.1
5.8
6.2
6.8
7.3
7.5
8.2
8.7
9.1
9.5
10
115
120
110
120
92
100
100
100
95
95
105
105
103
92
92
102
92
95
95
84
120
91
67
90
110
85
83
83
-
3
11
12
13
15
16
18
19
20
22
23
-
24
-
27
-
-
30
-
-
33
-
-
36
-
-
39
-
-
40
-
-
-
43
-
-
-
47
-
-
-
51
-
-
-
56
-
-
-
62
-
-
-
68
-
-
-
-
72
-
-
-
-
75
-
-
-
-
82
-
-
-
-
91
-
-
-
-
100
120
-
-
-
-
-
-
-
-
27
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQW15A_10 Series (High Q/Low DC Resistance Type)
■ Features
Lower DC resistance approximately by 50% than current
type. Higher Q by 20%, larger rated current by 20%.
Inductance range: 1.3 to 5.6nH
0.5±0.1
0.6±0.1
1.0±0.1
Inductance tolerance: +-0.2 or 0.5nH
Q (Typ.): 83 to 122 (at 1GHz)
3
DC Resistance: 0.017 to 0.051 ohm
Rated Current: 800 to 1200mA
0.2±0.1
0.2±0.1
■ Applications
(in mm)
1. Cellular phone and Base station
2. W-CDMA, GSM, N-CDMA, PDC
3. Higher Q -- Matching circuit for antenna, SAWFIL
4. Lower Rdc -- Choke coil for IF, RF circuit like PA
Equipment with high frequency circuits
(Wireless LAN, etc.)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(GHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQW15AN1N3C10
LQW15AN1N3D10
LQW15AN2N2C10
LQW15AN2N2D10
LQW15AN2N4D10
LQW15AN3N3D10
LQW15AN3N6C10
LQW15AN3N6D10
LQW15AN3N9D10
LQW15AN4N7D10
LQW15AN5N1C10
LQW15AN5N1D10
LQW15AN5N6C10
LQW15AN5N6D10
1.3 ±0.2nH
1.3 ±0.5nH
2.2 ±0.2nH
2.2 ±0.5nH
2.4 ±0.5nH
3.3 ±0.5nH
3.6 ±0.2nH
3.6 ±0.5nH
3.9 ±0.5nH
4.7 ±0.5nH
5.1 ±0.2nH
5.1 ±0.5nH
5.6 ±0.2nH
5.6 ±0.5nH
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1200
1200
1000
1000
1000
900
0.017 max.
0.017 max.
0.027 max.
0.027 max.
0.027 max.
0.040 max.
0.040 max.
0.040 max.
0.040 max.
0.051 max.
0.051 max.
0.051 max.
0.051 max.
0.051 max.
20
20
25
25
25
30
30
30
30
30
30
30
30
30
250
250
250
250
250
250
250
250
250
250
250
250
250
250
16.0
16.0
14.0
14.0
14.0
12.0
9.5
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
0402
900
900
9.5
900
7.0
800
8.0
800
8.0
800
8.0
800
8.0
800
8.0
Operating Temp. Range: -55°C to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
250
200
150
100
50
10
1.3nH
5.6nH
3.6nH
3.6nH
5.6nH
1.3nH
0
1
10
100
1000
10000
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
28
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
■ Reference Data
LQW15AN_10
E4991A & 16197A
Inductance (nH)
Q (Typ.)
1.5GHz
130
Part Number
Nominal
800MHz
90
900MHz
95
1.0GHz
100
95
1.8GHz
145
2.0GHz
160
2.4GHz
180
LQW15AN1N3
LQW15AN2N2
LQW15AN2N4
LQW15AN3N3
LQW15AN3N6
LQW15AN3N9
LQW15AN4N7
LQW15AN5N1
LQW15AN5N6
1.3
2.2
2.4
3.3
3.6
3.9
4.7
5.1
5.6
85
90
115
130
140
160
80
85
90
110
130
140
160
80
85
90
110
120
128
140
73
75
85
100
110
115
130
3
75
80
83
95
110
115
120
75
80
85
100
113
120
132
75
80
85
100
110
115
128
70
75
78
95
100
105
110
LQW18A_00 Series
■ Features
1. Broad range of inductance (2.2nH to 470nH) with E24
step line up.
2. Horizontal wound structure enables tight
inductance tolerance (+-0.2nH, +-2%). Stable circuit
operation is possible.
1.6±0.2
0.80±0.15
*
1 0.8±0.2
*
1 LQW18AN_10 : 0.8±0.3
3. The subminiature dimensions (1.6x0.8mm) allow high
density mounting.
4. The high self resonant frequency realizes high Q
value and stable inductance at high frequency.
5. Low DC resistance design is ideal for low loss,
high output and low power consumption.
6. Resin-coated surface enables excellent mounting.
0.3±0.1
0.3±0.1
in mm
■ Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. Bluetooth
4. W-LAN
5. High frequency circuits in general
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(ohm)
LQW18AN2N2D00
LQW18AN3N6C00
LQW18AN3N6D00
LQW18AN3N9C00
LQW18AN3N9D00
LQW18AN4N3C00
LQW18AN4N3D00
LQW18AN4N7D00
LQW18AN5N6C00
LQW18AN5N6D00
LQW18AN6N2C00
LQW18AN6N2D00
LQW18AN6N8C00
LQW18AN6N8D00
LQW18AN7N5D00
LQW18AN8N2D00
LQW18AN8N7D00
LQW18AN9N1D00
LQW18AN9N5D00
2.2 ±0.5nH
3.6 ±0.2nH
3.6 ±0.5nH
3.9 ±0.2nH
3.9 ±0.5nH
4.3 ±0.2nH
4.3 ±0.5nH
4.7 ±0.5nH
5.6 ±0.2nH
5.6 ±0.5nH
6.2 ±0.2nH
6.2 ±0.5nH
6.8 ±0.2nH
6.8 ±0.5nH
7.5 ±0.5nH
8.2 ±0.5nH
8.7 ±0.5nH
9.1 ±0.5nH
9.5 ±0.5nH
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
700
850
850
850
850
850
850
850
750
750
750
750
750
750
750
650
650
650
650
0.049 max.
0.059 max.
0.059 max.
0.059 max.
0.059 max.
0.059 max.
0.059 max.
0.059 max.
0.082 max.
0.082 max.
0.082 max.
0.082 max.
0.082 max.
0.082 max.
0.082 max.
0.11 max.
16
25
25
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0.11 max.
0.11 max.
0.11 max.
Continued on the following page.
29
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQW18AN10NG00
LQW18AN10NJ00
LQW18AN11NG00
LQW18AN11NJ00
LQW18AN12NG00
LQW18AN12NJ00
LQW18AN13NG00
LQW18AN13NJ00
LQW18AN15NG00
LQW18AN15NJ00
LQW18AN16NG00
LQW18AN16NJ00
LQW18AN18NG00
LQW18AN18NJ00
LQW18AN20NG00
LQW18AN20NJ00
LQW18AN22NG00
LQW18AN22NJ00
LQW18AN24NG00
LQW18AN24NJ00
LQW18AN27NG00
LQW18AN27NJ00
LQW18AN30NG00
LQW18AN30NJ00
LQW18AN33NG00
LQW18AN33NJ00
LQW18AN36NG00
LQW18AN36NJ00
LQW18AN39NG00
LQW18AN39NJ00
LQW18AN43NG00
LQW18AN43NJ00
LQW18AN47NG00
LQW18AN47NJ00
LQW18AN51NG00
LQW18AN51NJ00
LQW18AN56NG00
LQW18AN56NJ00
LQW18AN62NG00
LQW18AN62NJ00
LQW18AN68NG00
LQW18AN68NJ00
LQW18AN72NG00
LQW18AN72NJ00
LQW18AN75NG00
LQW18AN75NJ00
LQW18AN82NG00
LQW18AN82NJ00
LQW18AN91NG00
LQW18AN91NJ00
LQW18ANR10G00
LQW18ANR10J00
LQW18ANR11G00
LQW18ANR11J00
LQW18ANR12G00
LQW18ANR12J00
LQW18ANR13G00
10 ±2%
10 ±5%
11 ±2%
11 ±5%
12 ±2%
12 ±5%
13 ±2%
13 ±5%
15 ±2%
15 ±5%
16 ±2%
16 ±5%
18 ±2%
18 ±5%
20 ±2%
20 ±5%
22 ±2%
22 ±5%
24 ±2%
24 ±5%
27 ±2%
27 ±5%
30 ±2%
30 ±5%
33 ±2%
33 ±5%
36 ±2%
36 ±5%
39 ±2%
39 ±5%
43 ±2%
43 ±5%
47 ±2%
47 ±5%
51 ±2%
51 ±5%
56 ±2%
56 ±5%
62 ±2%
62 ±5%
68 ±2%
68 ±5%
72 ±2%
72 ±5%
75 ±2%
75 ±5%
82 ±2%
82 ±5%
91 ±2%
91 ±5%
100 ±2%
100 ±5%
110 ±2%
110 ±5%
120 ±2%
120 ±5%
130 ±2%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
650
650
650
650
600
600
600
600
600
600
550
550
550
550
550
550
500
500
500
500
440
440
420
420
420
420
400
400
400
400
380
380
380
380
370
370
360
360
280
280
340
340
270
270
270
270
250
250
230
230
220
220
200
200
180
180
170
0.11 max.
0.11 max.
0.11 max.
0.11 max.
0.13 max.
0.13 max.
0.13 max.
0.13 max.
0.13 max.
0.13 max.
0.16 max.
0.16 max.
0.16 max.
0.16 max.
0.16 max.
0.16 max.
0.17 max.
0.17 max.
0.21 max.
0.21 max.
0.21 max.
0.21 max.
0.23 max.
0.23 max.
0.23 max.
0.23 max.
0.26 max.
0.26 max.
0.26 max.
0.26 max.
0.29 max.
0.29 max.
0.29 max.
0.29 max.
0.33 max.
0.33 max.
0.35 max.
0.35 max.
0.51 max.
0.51 max.
0.38 max.
0.38 max.
0.56 max.
0.56 max.
0.56 max.
0.56 max.
0.60 max.
0.60 max.
0.64 max.
0.64 max.
0.68 max.
0.68 max.
1.2 max.
35
35
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
38
38
38
38
38
38
38
38
38
38
34
34
34
34
34
34
34
34
34
34
32
32
32
32
32
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200
200
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
5500
5500
5500
5500
4900
4900
4600
4600
3800
3800
3700
3700
3300
3300
3200
3200
2900
2900
2800
2800
2700
2700
2600
2600
2500
2500
2400
2400
2300
2300
2200
2200
2100
2100
2050
2050
2000
2000
1900
1900
1800
1800
1350
1350
1600
1600
1450
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
3
1.2 max.
1.3 max.
1.3 max.
1.4 max.
Continued on the following page.
30
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQW18ANR13J00
LQW18ANR15G00
LQW18ANR15J00
LQW18ANR16G00
LQW18ANR16J00
LQW18ANR18G00
LQW18ANR18J00
LQW18ANR20G00
LQW18ANR20J00
LQW18ANR22G00
LQW18ANR22J00
LQW18ANR27G00
LQW18ANR27J00
LQW18ANR33G00
LQW18ANR33J00
LQW18ANR39G00
LQW18ANR39J00
LQW18ANR47G00
LQW18ANR47J00
130 ±5%
150 ±2%
150 ±5%
160 ±2%
160 ±5%
180 ±2%
180 ±5%
200 ±2%
200 ±5%
220 ±2%
220 ±5%
270 ±2%
270 ±5%
330 ±2%
330 ±5%
390 ±2%
390 ±5%
470 ±2%
470 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
170
160
160
150
150
140
140
120
120
120
120
110
110
85
1.4 max.
1.5 max.
1.5 max.
2.1 max.
2.1 max.
2.2 max.
2.2 max.
2.4 max.
2.4 max.
2.5 max.
2.5 max.
3.4 max.
3.4 max.
5.5 max.
5.5 max.
6.2 max.
6.2 max.
7.0 max.
7.0 max.
32
32
32
32
32
25
25
25
25
25
25
30
30
30
30
30
30
30
30
150
150
150
150
150
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1450
1400
1400
1350
1350
1300
1300
1250
1250
1200
1200
960
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
3
960
800
85
800
80
800
80
800
75
700
75
700
Operating Temp. Range: -55°C to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
10000
120
100
80
8.7nH
20nH
470nH
220nH
1000
47nH
100nH
47nH
100
10
1
Q
60
40
100nH
20nH
8.7nH
20
0
470nH
220nH
10
100
1000
Frequency (MHz)
10000
10
100
1000
10000
Frequency (MHz)
31
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQW18A_10 Series (High Q/Low DC Resistance Type)
■ Features
DC Resistance is about 50% less than current type.
Q is about 10% higher, and allowable current is about
20% higher than current type. Tight inductance
tolerance is available.
1.6±0.2
0.80±0.15
*
1 0.8±0.2
3
*
1 LQW18AN_10 : 0.8±0.3
■ Applications
Cellular phone and Base station.
W-CDMA, GSM, N-CDMA, PDC.
Higher Q -- Matching circuit for antenna, SAWFIL.
Lower Rdc -- Choke coil for IF, RF circuit like PA.
Equipment with high frequency circuits
(Wireless LAN etc.)
0.3±0.1
0.3±0.1
in mm
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQW18AN2N2D10
LQW18AN3N9C10
LQW18AN3N9D10
LQW18AN5N6D10
LQW18AN6N8C10
LQW18AN6N8D10
LQW18AN8N2D10
LQW18AN10NG10
LQW18AN10NJ10
LQW18AN12NG10
LQW18AN12NJ10
LQW18AN15NJ10
LQW18AN18NG10
LQW18AN18NJ10
LQW18AN22NG10
LQW18AN22NJ10
LQW18AN27NG10
LQW18AN27NJ10
LQW18AN33NJ10
2.2 ±0.5nH
3.9 ±0.2nH
3.9 ±0.5nH
5.6 ±0.5nH
6.8 ±0.2nH
6.8 ±0.5nH
8.2 ±0.5nH
10 ±2%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1400
1000
1000
900
900
900
800
800
800
750
750
700
700
700
640
640
590
590
550
0.018 max.
0.032 max.
0.032 max.
0.045 max.
0.045 max.
0.045 max.
0.058 max.
0.058 max.
0.058 max.
0.071 max.
0.071 max.
0.085 max.
0.085 max.
0.085 max.
0.099 max.
0.099 max.
0.116 max.
0.116 max.
0.132 max.
25
38
38
38
38
38
38
38
38
38
38
42
42
42
42
42
42
42
42
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
18000
11000
11000
10000
7000
7000
7000
5000
5000
5000
5000
4500
3500
3500
3200
3200
2800
2800
2500
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
10 ±5%
12 ±2%
12 ±5%
15 ±5%
18 ±2%
18 ±5%
22 ±2%
22 ±5%
27 ±2%
27 ±5%
33 ±5%
Operating Temp. Range: -55°C to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
100
200
33nH
2.2nH
10nH
33nH
10nH
Q
100
10
2.2nH
0
10
1
100
1000
10000
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
32
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
High Frequency Wound Type LQW2BH/LQW31H Series
1.5±0.2
1.5±0.2
LQW2BH series consists of air-core chip coil using
a sub-miniature alumina core as a bobbin.
The series has excellent solder heat resistance.
Both flow and reflow soldering methods can be
2.0±0.2
1.5±0.2
employed.
4
■ Features (LQW2BH_03)
1. Inductance: 3.3 to 470nH (Wide inductance ranges)
2. High self-resonant frequency characteristics
3. High Q value and highly stable inductance in
0.5 min.
0.5 min.
0.5 min.
(in mm)
high frequency
4. Low DC resistance and large rated current
■ Features (LQW2BH_13)
LQW2BH_13 using thick wire has higher Q value than
existing LQW2BH_03 series.
1. Inductance: 2.7 to 27nH
2. DC resistance: 0.02 to 0.06 ohm
3. Q value: 85 to 95 (Typ.) at 800MHz
4. Rated current: 900 to 1900mA
■ Applications
1. High frequency circuit in telecommunications
equipment, such as DECT, PHS, PCS, PCN, GSM and
CDMA.
2. Impedance Matching
- PA module
- SAW filter
3. Resonance circuit
- VCO
LQW2BH_03 Series
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQW2BHN3N3D03
LQW2BHN6N8D03
LQW2BHN8N2D03
LQW2BHN10NJ03
LQW2BHN12NJ03
LQW2BHN15NJ03
LQW2BHN18NJ03
LQW2BHN22NJ03
LQW2BHN27NJ03
LQW2BHN33NG03
LQW2BHN33NJ03
LQW2BHN39NG03
LQW2BHN39NJ03
LQW2BHN47NG03
LQW2BHN47NJ03
LQW2BHN56NG03
LQW2BHN56NJ03
3.3 ±0.5nH
6.8 ±0.5nH
8.2 ±0.5nH
10 ±5%
12 ±5%
15 ±5%
18 ±5%
22 ±5%
27 ±5%
33 ±2%
33 ±5%
39 ±2%
39 ±5%
47 ±2%
47 ±5%
56 ±2%
56 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
910
680
630
1320
680
630
690
720
540
570
570
730
730
450
450
430
430
0.05 max.
0.11 max.
0.12 max.
0.03 max.
0.11 max.
0.12 max.
0.10 max.
0.09 max.
0.17 max.
0.15 max.
0.15 max.
0.09 max.
0.09 max.
0.23 max.
0.23 max.
0.26 max.
0.26 max.
10
20
20
30
30
30
30
30
40
40
40
40
40
40
40
40
40
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200
200
200
6000
5400
3900
3300
3200
2700
2600
2100
2300
1900
1900
1700
1700
1600
1600
1500
1500
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
Continued on the following page.
33
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(nH)
LQW2BHN68NG03
LQW2BHN68NJ03
LQW2BHN82NG03
LQW2BHN82NJ03
LQW2BHNR10G03
LQW2BHNR10J03
LQW2BHNR12G03
LQW2BHNR12J03
LQW2BHNR15G03
LQW2BHNR15J03
LQW2BHNR18G03
LQW2BHNR18J03
LQW2BHNR22G03
LQW2BHNR22J03
LQW2BHNR27J03
LQW2BHNR27K03
LQW2BHNR33J03
LQW2BHNR33K03
LQW2BHNR39J03
LQW2BHNR39K03
LQW2BHNR47J03
LQW2BHNR47K03
68 ±2%
68 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10
460
460
320
320
270
350
320
320
260
390
250
250
240
240
190
190
180
180
170
170
160
160
0.23 max.
0.23 max.
0.42 max.
0.42 max.
0.55 max.
0.38 max.
0.40 max.
0.40 max.
0.68 max.
0.47 max.
0.71 max.
0.71 max.
0.70 max.
0.70 max.
2.00 max.
2.00 max.
2.20 max.
2.20 max.
2.50 max.
2.50 max.
2.80 max.
2.80 max.
40
40
40
40
35
40
40
40
30
30
35
35
35
35
15
15
15
15
15
15
15
15
200
200
150
150
150
150
150
150
150
150
100
100
100
100
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
1200
1200
1100
1100
900
900
750
750
350
350
700
700
500
500
550
550
500
500
400
400
350
350
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
82 ±2%
82 ±5%
100 ±2%
100 ±5%
120 ±2%
120 ±5%
150 ±2%
150 ±5%
180 ±2%
180 ±5%
220 ±2%
220 ±5%
270 ±5%
270 ±10%
330 ±5%
330 ±10%
390 ±5%
390 ±10%
470 ±5%
470 ±10%
4
10
10
10
10
10
10
10
Operating Temp. Range: -25°C to +85°C
LQW2BH_13 Series (High Q/Low DC Resistance Type)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQW2BHN2N7D13
LQW2BHN3N1D13
LQW2BHN3N3D13
LQW2BHN5N6D13
LQW2BHN6N8D13
LQW2BHN8N6D13
LQW2BHN10NJ13
LQW2BHN12NK13
LQW2BHN15NK13
LQW2BHN18NK13
LQW2BHN21NK13
LQW2BHN27NK13
2.7 ±0.5nH
3.1 ±0.5nH
3.3 ±0.5nH
5.6 ±0.5nH
6.8 ±0.5nH
8.6 ±0.5nH
10 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
1900
1800
1700
1500
1400
1300
1320
1100
1000
1000
950
0.02 max.
0.02 max.
0.02 max.
0.02 max.
0.02 max.
0.03 max.
0.03 max.
0.04 max.
0.04 max.
0.05 max.
0.05 max.
0.06 max.
20
20
20
35
35
35
35
40
40
40
40
40
250
250
250
250
250
250
250
250
250
250
250
250
6000
6000
6000
6000
5400
3900
3300
3200
3100
2600
2200
1800
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
12 ±10%
15 ±10%
18.8 ±10%
21 ±10%
27 ±10%
900
Operating Temp. Range: -25°C to +85°C
34
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Q-Frequency Characteristics
LQW2BH_03
LQW2BH_13
140
140
120
100
80
3.3nH
12nH
120
100
80
Q
Q
60
60
330nH
470nH
40
40
27nH
20
0
20
10nH
33nH
220nH
1000
0
10
1
10
100
10000
100
1000
10000
4
Frequency (MHz)
Frequency (MHz)
■ Inductance-Frequency Characteristics
LQW2BH_03
LQW2BH_13
60
50
10000
27nH
330nH
470nH
1000
270nH
40
30
20
10
0
33nH
100
10
1
10nH
12nH
3.3nH
10
100
1000
10000
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
35
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQW31H Series
2.3±0.2
1.6±0.2
LQW31H series is alumina-core-type chip inductor
for high frequency circuit. Its low dc resistance and
high Q due to wound structure are suitable for hand
held telecommunications equipment.
1.6±0.2
3.2±0.3
■ Features
1. Inductance range from 8.8 to 100nH.
2. Because of the high self resonant frequency, it
can be used in high frequency range.
3. Tight inductance tolerance (+-5%)
(in mm)
4
0.7 min. 0.7 min. 0.7 min.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQW31HN8N8J03
LQW31HN8N8K03
LQW31HN15NJ03
LQW31HN15NK03
LQW31HN17NJ03
LQW31HN17NK03
LQW31HN23NJ03
LQW31HN23NK03
LQW31HN27NJ03
LQW31HN27NK03
LQW31HN33NJ03
LQW31HN33NK03
LQW31HN39NJ03
LQW31HN39NK03
LQW31HN47NJ03
LQW31HN47NK03
LQW31HN56NJ03
LQW31HN56NK03
LQW31HN64NJ03
LQW31HN64NK03
LQW31HN84NJ03
LQW31HN84NK03
LQW31HNR10J03
LQW31HNR10K03
8.8 ±5%
8.8 ±10%
14.7 ±5%
14.7 ±10%
17 ±5%
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
750
750
680
680
650
650
590
590
560
560
530
530
490
490
380
380
330
330
290
290
240
240
230
230
0.029 ±40%
0.029 ±40%
0.035 ±40%
0.035 ±40%
0.037 ±40%
0.037 ±40%
0.046 ±40%
0.046 ±40%
0.051 ±40%
0.051 ±40%
0.057 ±40%
0.057 ±40%
0.067 ±40%
0.067 ±40%
0.11 ±40%
0.11 ±40%
0.14 ±40%
0.14 ±40%
0.18 ±40%
0.18 ±40%
0.28 ±40%
0.28 ±40%
0.3 ±40%
50
50
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
436
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
900
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
17 ±10%
23 ±5%
23 ±10%
27 ±5%
27 ±10%
33 ±5%
33 ±10%
39 ±5%
39 ±10%
47 ±5%
47 ±10%
56 ±5%
56 ±10%
64 ±5%
64 ±10%
84 ±5%
84 ±10%
100 ±5%
100 ±10%
0.3 ±40%
900
Operating Temp. Range: -25°C to +85°C
■ Q-Frequency Characteristics
120
100
80
8.8nH
39nH
Q
60
40
20
0
100nH
10
50
100
500
Frequency (MHz)
1000
5000
36
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
High Frequency Wound Type LQH31H Series
2.3±0.2
1.6±0.2
LQH31H series is wound type chip coil with ferrite
core for high frequency.
■ Features
1.6±0.2
1. Inductance range from 54 to 880nH
2. High Q value and stable inductance in high
frequency range from 30 to 150MHz
3. Both flow and reflow soldering methods can be
employed for excellent solder heat resistance.
3.2±0.3
(in mm)
5
0.7 min. 0.7 min. 0.7 min.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQH31HN54NK03
LQH31HN95NK03
LQH31HNR14J03
LQH31HNR14K03
LQH31HNR21J03
LQH31HNR21K03
LQH31HNR29J03
LQH31HNR29K03
LQH31HNR39J03
LQH31HNR39K03
LQH31HNR50J03
LQH31HNR50K03
LQH31HNR61J03
LQH31HNR61K03
LQH31HNR75J03
LQH31HNR75K03
LQH31HNR88J03
LQH31HNR88K03
54 ±10%
95 ±10%
145 ±5%
145 ±10%
215 ±5%
215 ±10%
290 ±5%
290 ±10%
390 ±5%
390 ±10%
500 ±5%
500 ±10%
610 ±5%
610 ±10%
750 ±5%
750 ±10%
880 ±5%
880 ±10%
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
920
790
700
700
520
520
420
420
330
330
260
260
250
250
190
190
180
180
0.035 ±30%
0.047 ±30%
0.061 ±30%
0.061 ±30%
0.11 ±30%
0.11 ±30%
0.17 ±30%
0.17 ±30%
0.26 ±30%
0.26 ±30%
0.44 ±30%
0.44 ±30%
0.48 ±30%
0.48 ±30%
0.79 ±30%
0.79 ±30%
0.86 ±30%
0.86 ±30%
50
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
800
650
500
500
430
430
360
360
300
300
270
270
240
240
220
220
200
200
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
Operating Temp. Range: -25°C to +85°C
■ Q-Frequency Characteristics
100
80
215nH
880nH
54nH
60
Q
40
20
0
1
5
10
50
100
500 1000
Frequency (MHz)
37
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
for General Use Monolithic Type LQM18N/LQM21N Series
LQM18N Series
0.4±0.2
The LQM18N series of magnetically shielded chip coils
Electrode
was developed by using original multilayer process
technology and magnetic materials.
Compact size is suitable for high density mounting.
Shielded construction is not affected by interference
0.8±0.15
1.6±0.15
from peripheral components.
■ Features
1. Magnetically shielded structure provides excellent
characteristics in crosstalk and magnetic
coupling.
(in mm)
6
2. Compact size (1.6x0.8mm) and light weight
3. The external electrodes with nickel barrier
structure provide excellent solder heat resistance.
Both flow and reflow soldering can be applicable.
■ Applications
1. Resonance circuit, traps, filter circuits
2. RF choke in telecommunications equipment, cordless
phones, radio equipment
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
(nH)
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
LQM18NN47NM00
LQM18NN68NM00
LQM18NN82NM00
LQM18NNR10K00
LQM18NNR12K00
LQM18NNR15K00
LQM18NNR18K00
LQM18NNR22K00
LQM18NNR27K00
LQM18NNR33K00
LQM18NNR39K00
LQM18NNR47K00
LQM18NNR56K00
LQM18NNR68K00
LQM18NNR82K00
LQM18NN1R0K00
LQM18NN1R2K00
LQM18NN1R5K00
LQM18NN1R8K00
LQM18NN2R2K00
47 ±20%
68 ±20%
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
50
50
50
50
50
50
50
50
50
35
35
35
35
35
35
25
25
25
25
15
0.30 max.
0.30 max.
0.30 max.
0.50 max.
0.50 max.
0.60 max.
0.60 max.
0.80 max.
0.80 max.
0.85 max.
1.00 max.
1.35 max.
1.55 max.
1.70 max.
2.10 max.
0.60 max.
0.80 max.
0.80 max.
0.95 max.
1.15 max.
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
35
35
35
35
35
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
260
250
245
240
205
180
165
150
136
125
110
105
95
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
82 ±20%
100 ±10%
120 ±10%
150 ±10%
180 ±10%
220 ±10%
270 ±10%
330 ±10%
390 ±10%
470 ±10%
560 ±10%
680 ±10%
820 ±10%
1000 ±10%
1200 ±10%
1500 ±10%
1800 ±10%
2200 ±10%
90
85
75
65
60
55
50
Operating Temp. Range: -40°C to +85°C
38
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Q-Frequency Characteristics
■ Inductance-Frequency Characteristics
10000
80
2200nH
60
820nH
2200nH
1000
40
100nH
100nH
100
820nH
20
47nH
47nH
0
10
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
LQM21N Series
0.5±0.3
Electrode
■ Features
The LQM21N series consists of magnetically shielded
chip inductors developed using Murata's original
multilayer process technology and magnetic materials.
The miniature size of 2.0x1.25mm enables compact
design of electric equipment. Inductance range from
0.1 micro H to 4.7 micro H is available.
t
6
1.25±0.2
2.0±0.3
(in mm)
Inductance : 0.1 to 2.2µH 0.85±0.2
Inductance : 2.7 to 4.7µH 1.25±0.2
Dimension of t
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(µH)
LQM21NNR10K10
LQM21NNR12K10
LQM21NNR15K10
LQM21NNR18K10
LQM21NNR22K10
LQM21NNR27K10
LQM21NNR33K10
LQM21NNR39K10
LQM21NNR47K10
LQM21NNR56K10
LQM21NNR68K10
LQM21NNR82K10
LQM21NN1R0K10
LQM21NN1R2K10
LQM21NN1R5K10
LQM21NN1R8K10
LQM21NN2R2K10
LQM21NN2R7K10
LQM21NN3R3K10
LQM21NN3R9K10
LQM21NN4R7K10
0.1 ±10%
0.12 ±10%
0.15 ±10%
0.18 ±10%
0.22 ±10%
0.27 ±10%
0.33 ±10%
0.39 ±10%
0.47 ±10%
0.56 ±10%
0.68 ±10%
0.82 ±10%
1 ±10%
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
250
250
250
250
250
250
250
200
200
150
150
150
50
0.26 max.
0.29 max.
0.32 max.
0.35 max.
0.38 max.
0.42 max.
0.48 max.
0.53 max.
0.57 max.
0.63 max.
0.72 max.
0.81 max.
0.40 max.
0.47 max.
0.50 max.
0.57 max.
0.63 max.
0.69 max.
0.80 max.
0.89 max.
1.00 max.
20
20
20
20
20
20
20
25
25
25
25
25
45
45
45
45
45
45
45
45
45
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
340
310
270
250
220
200
180
165
150
140
125
115
107
97
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
1.2 ±10%
1.5 ±10%
1.8 ±10%
2.2 ±10%
2.7 ±10%
3.3 ±10%
3.9 ±10%
4.7 ±10%
50
50
87
50
80
30
71
30
66
30
59
30
53
30
47
Operating Temp. Range: -40°C to +85°C
39
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Q-Frequency Characteristics
■ Inductance-Current Characteristics
100
50
1.0µH
0.1µH
80
60
40
1.8µH
4.7µH
10
0.22µH
4.7µH
5
Q
1.8µH
0.18µH
20
0
1
1.0µH
0.82µH
0.5
1
10
100
1000
0.22µH
0.10µH
Frequency (MHz)
0.1
1
5
10
50
100
500
1000
Current (mA)
6
40
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
for General Use Wound Type LQH31M/LQH32M/LQH43M (N) Series
LQH31M Series
2.3±0.2
1.6±0.2
LQH31M series consists of wound type chip coils
using Murata's original ferrite core and auto winding
technology.
■ Features
1.6±0.2
3.2±0.3
1. Wide inductance range from 0.15 to 100 micro H
2. High Q value at high frequencies and low DC
resistance
3. Small size (3.2x1.6x1.8mm) and tight pitch mounting
4. Low DC resistance and large current
5. Both flow and reflow soldering heat resistance
(in mm)
0.7 min. 0.7 min. 0.7 min.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(µH)
LQH31MNR15K03
LQH31MNR22K03
LQH31MNR33K03
LQH31MNR47K03
LQH31MNR56K03
LQH31MNR68K03
LQH31MNR82K03
LQH31MN1R0K03
LQH31MN1R2K03
LQH31MN1R5J03
LQH31MN1R5K03
LQH31MN1R8J03
LQH31MN1R8K03
LQH31MN2R2J03
LQH31MN2R2K03
LQH31MN2R7J03
LQH31MN2R7K03
LQH31MN3R3J03
LQH31MN3R3K03
LQH31MN3R9J03
LQH31MN3R9K03
LQH31MN4R7J03
LQH31MN4R7K03
LQH31MN5R6J03
LQH31MN5R6K03
LQH31MN6R8J03
LQH31MN6R8K03
LQH31MN8R2J03
LQH31MN8R2K03
LQH31MN100J03
LQH31MN100K03
LQH31MN120J03
LQH31MN120K03
LQH31MN150J03
LQH31MN150K03
LQH31MN180J03
0.15 ±10%
0.22 ±10%
0.33 ±10%
0.47 ±10%
0.56 ±10%
0.68 ±10%
0.82 ±10%
1.0 ±10%
1.2 ±10%
1.5 ±5%
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
250
240
230
215
200
190
185
175
165
155
155
150
150
140
140
135
135
130
130
125
125
120
120
115
115
110
110
105
105
100
100
95
0.39 ±40%
0.43 ±40%
0.45 ±40%
0.83 ±40%
0.61 ±40%
0.67 ±40%
0.73 ±40%
0.49 ±30%
0.9 ±30%
1.0 ±30%
1.0 ±30%
1.6 ±30%
1.6 ±30%
0.7 ±30%
0.7 ±30%
0.55 ±30%
0.55 ±30%
1.4 ±30%
1.4 ±30%
1.5 ±30%
1.5 ±30%
1.7 ±30%
1.7 ±30%
1.8 ±30%
1.8 ±30%
2.0 ±30%
2.0 ±30%
2.2 ±30%
2.2 ±30%
2.5 ±30%
2.5 ±30%
2.7 ±30%
2.7 ±30%
3.0 ±30%
3 ±30%
20
20
30
30
30
30
30
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
8
250
250
250
200
180
160
120
100
90
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
7
75
1.5 ±10%
1.8 ±5%
75
60
1.8 ±10%
2.2 ±5%
60
50
2.2 ±10%
2.7 ±5%
50
43
2.7 ±10%
3.3 ±5%
43
38
3.3 ±10%
3.9 ±5%
8
38
8
35
3.9 ±10%
4.7 ±5%
8
35
8
31
4.7 ±10%
5.6 ±5%
8
31
8
28
5.6 ±10%
6.8 ±5%
8
28
8
25
6.8 ±10%
8.2 ±5%
8
25
8
23
8.2 ±10%
10 ±5%
8
23
5
20
10 ±10%
12 ±5%
5
20
5
18
12 ±10%
15 ±5%
95
5
18
90
5
16
15 ±10%
18 ±5%
90
5
16
85
3.4 ±30%
5
15
Continued on the following page.
41
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Q
(min.)
Test Frequency
(MHz)
Part Number
EIA
(µH)
LQH31MN180K03
LQH31MN220J03
LQH31MN220K03
LQH31MN270J03
LQH31MN270K03
LQH31MN330J03
LQH31MN330K03
LQH31MN390J03
LQH31MN390K03
LQH31MN470J03
LQH31MN470K03
LQH31MN560J03
LQH31MN560K03
LQH31MN680J03
LQH31MN680K03
LQH31MN820J03
LQH31MN820K03
LQH31MN101J03
LQH31MN101K03
18 ±10%
22 ±5%
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
85
85
85
85
85
80
80
55
55
55
55
50
50
50
50
45
45
45
45
3.4 ±30%
3.1 ±30%
3.1 ±30%
3.4 ±30%
3.4 ±30%
3.8 ±30%
3.8 ±30%
7.2 ±30%
7.2 ±30%
8 ±30%
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
5
15
14
14
13
13
12
12
11
11
10
10
9
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
22 ±10%
27 ±5%
27 ±10%
33 ±5%
33 ±10%
39 ±5%
39 ±10%
47 ±5%
47 ±10%
56 ±5%
8.0 ±30%
8.9 ±30%
8.9 ±30%
9.9 ±30%
9.9 ±30%
11 ±30%
11 ±30%
12 ±30%
12 ±30%
56 ±10%
68 ±5%
9
8.5
8.5
7.5
7.5
7
68 ±10%
82 ±5%
82 ±10%
100 ±5%
100 ±10%
7
Operating Temp. Range: -25°C to +85°C
7
■ Q-Frequency Characteristics
■ Inductance-Current Characteristics
100
500
80
100µH
100µH
10µH
1µH
100
60
40
Q
50
33µH
20
0
10µH
10
0.5
1
5
10
50
100
5
Frequency (MHz)
1.0µH
1
5
10
50
100
500
Current (mA)
■ Coupling Coefficient
10
8
R
6
R=0.9mm
(2.5mm Pitch Parallel
Mounting)
4
2
R=2.0mm
0
0.5
1
5
10
50
100
Inductance (µH)
42
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQH32M Series
2.5±0.2
2.5±0.2
LQH32M series consists of miniature chip inductors
wound on a special ferrite core.
■ Features
2.5±0.2
3.2±0.3
1. High Q value at high frequencies and low DC
resistance
2. Wide inductance range from 1.0 to 560 micro H
0.9±0.3 1.3±0.2 0.9±0.3
(in mm)
Rated
Current
(mA)
Self Resonance
Test Frequency Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Q
(min.)
Part Number
Test Frequency
EIA
(µH)
LQH32MN1R0M23
LQH32MN1R2M23
LQH32MN1R5K23
LQH32MN1R8K23
LQH32MN2R2K23
LQH32MN2R7K23
LQH32MN3R3K23
LQH32MN3R9K23
LQH32MN4R7K23
LQH32MN5R6K23
LQH32MN6R8K23
LQH32MN8R2K23
LQH32MN100J23
LQH32MN100K23
LQH32MN120J23
LQH32MN120K23
LQH32MN150J23
LQH32MN150K23
LQH32MN180J23
LQH32MN180K23
LQH32MN220J23
LQH32MN220K23
LQH32MN270J23
LQH32MN270K23
LQH32MN330J23
LQH32MN330K23
LQH32MN390J23
LQH32MN390K23
LQH32MN470J23
LQH32MN470K23
LQH32MN560J23
LQH32MN560K23
LQH32MN680J23
LQH32MN680K23
LQH32MN820J23
LQH32MN820K23
LQH32MN101J23
LQH32MN101K23
LQH32MN121J23
LQH32MN121K23
LQH32MN151J23
LQH32MN151K23
1.0 ±20%
1.2 ±20%
1.5 ±10%
1.8 ±10%
2.2 ±10%
2.7 ±10%
3.3 ±10%
3.9 ±10%
4.7 ±10%
5.6 ±10%
6.8 ±10%
8.2 ±10%
10 ±5%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
445
425
400
390
370
320
300
290
270
250
240
225
190
190
180
180
170
170
165
165
150
150
125
125
115
115
110
110
100
100
85
0.5 max.
0.6 max.
0.6 max.
0.7 max.
0.8 max.
0.9 max.
1.0 max.
1.1 max.
1.2 max.
1.3 max.
1.5 max.
1.6 max.
1.8 max.
1.8 max.
2.0 max.
2.0 max.
2.2 max.
2.2 max.
2.5 max.
2.5 max.
2.8 max.
2.8 max.
3.1 max.
3.1 max.
3.5 max.
3.5 max.
3.9 max.
3.9 max.
4.3 max.
4.3 max.
4.9 max.
4.9 max.
5.5 max.
5.5 max.
6.2 max.
6.2 max.
7.0 max.
7.0 max.
8.0 max.
8.0 max.
9.3 max.
9.3 max.
20
20
20
20
20
20
20
20
20
20
20
20
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
100
100
75
60
50
43
38
35
31
28
25
23
20
20
18
18
16
16
15
15
14
14
13
13
12
12
11
11
11
11
10
10
9
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
7
10 ±10%
12 ±5%
12 ±10%
15 ±5%
15 ±10%
18 ±5%
18 ±10%
22 ±5%
22 ±10%
27 ±5%
27 ±10%
33 ±5%
33 ±10%
39 ±5%
39 ±10%
47 ±5%
47 ±10%
56 ±5%
56 ±10%
68 ±5%
85
80
68 ±10%
82 ±5%
80
9
70
8.5
8.5
8
82 ±10%
100 ±5%
100 ±10%
120 ±5%
120 ±10%
150 ±5%
150 ±10%
70
80
80
8
75
7.5
7.5
7
75
70
70
7
Continued on the following page.
43
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Test Frequency Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Q
(min.)
Part Number
Test Frequency
EIA
(µH)
LQH32MN181J23
LQH32MN181K23
LQH32MN221J23
LQH32MN221K23
LQH32MN271J23
LQH32MN271K23
LQH32MN331J23
LQH32MN331K23
LQH32MN391J23
LQH32MN391K23
LQH32MN471J23
LQH32MN471K23
LQH32MN561J23
LQH32MN561K23
180 ±5%
180 ±10%
220 ±5%
220 ±10%
270 ±5%
270 ±10%
330 ±5%
330 ±10%
390 ±5%
390 ±10%
470 ±5%
470 ±10%
560 ±5%
560 ±10%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1kHz
65
65
65
65
65
65
65
65
50
50
45
45
40
40
10.2 max.
10.2 max.
11.8 max.
11.8 max.
12.5 max.
12.5 max.
13.0 max.
13.0 max.
22.0 max.
22.0 max.
25.0 max.
25.0 max.
28.0 max.
28.0 max.
40
40
40
40
40
40
40
40
50
50
50
50
50
50
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
6
6
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
5.5
5.5
5
5
5
5
5
5
5
1kHz
5
1kHz
5
1kHz
5
Operating Temp. Range: -25°C to +85°C
■ Q-Frequency Characteristics
■ Inductance-Current Characteristics
100
500
220µH
80
7
100µH
100µH
10µH
100
60
Q
39µH
50
1µH
40
20
10µH
10
0
3.9µH
5
0.1
0.5
1
5
10
Frequency (MHz)
1.0µH
1
5
10
50
100
500
Current (mA)
44
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQH43M/N Series
3.2±0.2
3.6±0.2
LQH43M/N series consists of wound type chip coils
for general use by Murata's original auto winding
technology and ferrite core.
3.2±0.2
4.5±0.3
■ Features
1. High Q value at high frequency and low DC resistance
2. Wide inductance range from 1.0 to 2200 micro H
3. Large current and large inductance
(in mm)
1.0min. 1.0min. 1.0min.
Rated
Current
(mA)
Self Resonance
Test Frequency Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Q
(min.)
Part Number
Test Frequency
EIA
(µH)
LQH43MN1R0M03
LQH43MN1R2M03
LQH43MN1R5M03
LQH43MN1R8M03
LQH43MN2R2M03
LQH43MN2R7M03
LQH43MN3R3M03
LQH43MN3R9M03
LQH43MN4R7K03
LQH43MN5R6K03
LQH43MN6R8K03
LQH43MN8R2K03
LQH43MN100J03
LQH43MN100K03
LQH43MN120J03
LQH43MN120K03
LQH43MN150J03
LQH43MN150K03
LQH43MN180J03
LQH43MN180K03
LQH43MN220J03
LQH43MN220K03
LQH43MN270J03
LQH43MN270K03
LQH43MN330J03
LQH43MN330K03
LQH43MN390J03
LQH43MN390K03
LQH43MN470J03
LQH43MN470K03
LQH43MN560J03
LQH43MN560K03
LQH43MN680J03
LQH43MN680K03
LQH43MN820J03
LQH43MN820K03
LQH43MN101J03
LQH43MN101K03
LQH43MN121J03
LQH43MN121K03
LQH43MN151J03
LQH43MN151K03
1.0 ±20%
1.2 ±20%
1.5 ±20%
1.8 ±20%
2.2 ±20%
2.7 ±20%
3.3 ±20%
3.9 ±20%
4.7 ±10%
5.6 ±10%
6.8 ±10%
8.2 ±10%
10 ±5%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
500
500
500
500
500
500
500
500
500
500
450
450
400
400
380
380
360
360
340
340
320
320
300
300
270
270
240
240
220
220
200
200
180
180
170
170
160
160
150
150
130
130
0.20 max.
0.20 max.
0.30 max.
0.30 max.
0.30 max.
0.32 max.
0.35 max.
0.38 max.
0.40 max.
0.47 max.
0.50 max.
0.56 max.
0.56 max.
0.56 max.
0.62 max.
0.62 max.
0.73 max.
0.73 max.
0.82 max.
0.82 max.
0.94 max.
0.94 max.
1.1 max.
1.1 max.
1.2 max.
1.2 max.
1.4 max.
1.4 max.
1.5 max.
1.5 max.
1.7 max.
1.7 max.
1.9 max.
1.9 max.
2.2 max.
2.2 max.
2.5 max.
2.5 max.
3.0 max.
3.0 max.
3.7 max.
3.7 max.
20
20
20
20
20
20
20
20
30
30
30
30
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
40
40
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
120
100
85
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
75
62
53
47
7
41
38
33
31
27
23
10 ±10%
12 ±5%
23
21
12 ±10%
15 ±5%
21
19
15 ±10%
18 ±5%
19
17
18 ±10%
22 ±5%
17
15
22 ±10%
27 ±5%
15
14
27 ±10%
33 ±5%
14
12
33 ±10%
39 ±5%
12
11
39 ±10%
47 ±5%
11
10
47 ±10%
56 ±5%
10
9.3
9.3
8.4
8.4
7.5
7.5
6.8
6.8
6.2
6.2
5.5
5.5
56 ±10%
68 ±5%
68 ±10%
82 ±5%
82 ±10%
100 ±5%
100 ±10%
120 ±5%
120 ±10%
150 ±5%
150 ±10%
Continued on the following page.
45
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Continued from the preceding page.
Rated
Current
(mA)
Self Resonance
Test Frequency Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Q
(min.)
Part Number
Test Frequency
EIA
(µH)
LQH43MN181J03
LQH43MN181K03
LQH43MN221J03
LQH43MN221K03
LQH43MN271J03
LQH43MN271K03
LQH43MN331J03
LQH43MN331K03
LQH43MN391J03
LQH43MN391K03
LQH43MN471J03
LQH43MN471K03
LQH43MN561J03
LQH43MN561K03
LQH43MN681J03
LQH43MN681K03
LQH43MN821J03
LQH43MN821K03
LQH43MN102J03
LQH43MN102K03
LQH43MN122J03
LQH43MN122K03
LQH43MN152J03
LQH43MN152K03
LQH43NN182J03
LQH43NN182K03
LQH43NN222J03
LQH43NN222K03
180 ±5%
180 ±10%
220 ±5%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
120
120
110
110
100
100
95
4.5 max.
4.5 max.
5.4 max.
5.4 max.
6.8 max.
6.8 max.
8.2 max.
8.2 max.
9.7 max.
9.7 max.
11.8 max.
11.8 max.
14.5 max.
14.5 max.
17.0 max.
17.0 max.
20.5 max.
20.5 max.
25.0 max.
25.0 max.
30.0 max.
30.0 max.
37.0 max.
37.0 max.
45.0 max.
45.0 max.
50.0 max.
50.0 max.
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
796kHz
252kHz
252kHz
252kHz
252kHz
252kHz
252kHz
252kHz
252kHz
252kHz
252kHz
5
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
5
4.5
4.5
4
220 ±10%
270 ±5%
270 ±10%
330 ±5%
4
3.6
3.6
3.3
3.3
3
330 ±10%
390 ±5%
95
90
390 ±10%
470 ±5%
90
80
470 ±10%
560 ±5%
80
3
70
2.7
2.7
2.5
2.5
2.2
2.2
2
560 ±10%
680 ±5%
70
65
680 ±10%
820 ±5%
65
60
820 ±10%
1000 ±5%
1000 ±10%
1200 ±5%
1200 ±10%
1500 ±5%
1500 ±10%
1800 ±5%
1800 ±10%
2200 ±5%
2200 ±10%
60
50
50
2
45
1.8
1.8
1.6
1.6
1.5
1.5
1.3
1.3
45
7
40
40
35
35
30
30
Operating Temp. Range: -25°C to +85°C
■ Q-Frequency Characteristics
■ Inductance-Current Characteristics
100
5000
2200µH
1000µH
80
1000µH
1000
100µH
60
Q
500
10µH
40
20
390µH
100µH
100
0
50
0.1
0.5
1
5
10
39µH
Frequency (MHz)
10µH
10
5
10
50
100
500
Current (mA)
46
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
for DC-DC Converter WoundType LQH2MC Series
■ Features
1. Wound type with 0.95mm low-profile
2. Size: 2.0x1.6mm
2.0±0.2
1.6±0.2
3. Rated current: 300mA (4.7 micro H)
4. Wide inductance range: 4.7 to 82 micro H
■ Applications
For DC-DC converter
0.6±0.2 0.8±0.2 0.6±0.2
(in mm)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Part Number
(µH)
LQH2MCN4R7M02
LQH2MCN5R6M02
LQH2MCN6R8M02
LQH2MCN8R2M02
LQH2MCN100K02
LQH2MCN120K02
LQH2MCN150K02
LQH2MCN180K02
LQH2MCN220K02
LQH2MCN270K02
LQH2MCN330K02
LQH2MCN390K02
LQH2MCN470K02
LQH2MCN560K02
LQH2MCN680K02
LQH2MCN820K02
4.7 ±20%
5.6 ±20%
6.8 ±20%
8.2 ±20%
10 ±10%
12 ±10%
15 ±10%
18 ±10%
22 ±10%
27 ±10%
33 ±10%
39 ±20%
47 ±20%
56 ±20%
68 ±20%
82 ±20%
300
280
255
235
225
210
200
190
185
180
160
125
120
110
100
90
0.8 ±30%
0.9 ±30%
1.0 ±30%
1.1 ±30%
1.2 ±30%
1.4 ±30%
1.6 ±30%
1.8 ±30%
2.1 ±30%
2.5 ±30%
2.8 ±30%
4.4 ±30%
5.1 ±30%
5.7 ±30%
6.6 ±30%
7.5 ±30%
60
60
55
50
48
44
40
35
30
30
28
24
18
17
14
14
8
Operating Temp. Range: -40°C to +85°C
Only for reflow soldering.
■ Inductance-Frequency Characteristics
■ Inductance-Current Characteristics
1000
1000
82µH
47µH
100
100
10
1
82µH
47µH
22µH
10µH
4.7µH
22µH
10µH
10
4.7µH
1
0.1
1
10
100
10
100
DC Current (mA)
1000
Frequency (MHz)
47
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
for Choke Monolithic Type LQM21D/LQM21F/LQM31F Series
LQM21D Series
0.5±0.3
Electrode
The LQM21D series consists of magnetically shielded
chip inductors. It has less than half the DC
t
resistance of our conventional monolithic chip
1.25±0.2
2.0±0.2
inductors as well as high inductance.
■ Features
(in mm)
1. The inductors have very low DC resistance.
2. The series has an inductance range of 1.0 micro H
to 47 micro H.
Inductance : 1.0 to 10µH 0.85±0.2
Inductance : 22 to 47µH 1.25±0.2
Dimension of t
3. Magnetically shielded structure provides excellent
crosstalk characteristics.
4. Compact (2.0x1.25mm) and lightweight
5. Outstanding solder heat resistance. Either flow or
reflow soldering methods can be employed.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
DC Resistance
Part Number
EIA
(µH)
(MHz)
(ohm)
LQM21DN1R0N00
LQM21DN2R2N00
LQM21DN4R7N00
LQM21DN100N00
LQM21DN220N00
LQM21DN470N00
1.0 ±30%
2.2 ±30%
4.7 ±30%
10 ±30%
22 ±30%
47 ±30%
1
1
1
1
1
1
60
40
30
15
13
7
0.10 max.
0.17 max.
0.30 max.
0.50 max.
0.65 max.
1.20 max.
75
50
35
24
16
7.5
0805
0805
0805
0805
0805
0805
9
Operating Temp. Range: -40°C to +85°C
■ Impedance-Frequency Characteristics
LQM21D
10000
47µH
22µH
10µH
1000
100
4.7µH
2.5µH
1.0µH
10
1
1
10
100
1000
Frequency (MHz)
48
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQM21F_00 Series
0.5±0.3
Electrode
The LQM21F series consists of magnetically shielded
chip coils based on Murata's technologies of
t
multilayer process and magnetic materials. Excellent
direct current characteristics are realized by using
magnetic materials which have excellent saturation
characteristics. The inductance of LQM21F is four
times as large as that of conventional items.
1.25±0.2
2.0±0.2
(in mm)
■ Features
Inductance : 1.0 to 10µH 0.85±0.2
Inductance : 22 to 47µH 1.25±0.2
Dimension of t
1. LQM21F series is suitable for power line choke
because of its excellent direct current
characteristics. The series has larger rated
current (60mA at 10 micro H) than conventional
rated current.
2. Low DC resistance is realized.
3. The crosstalk characteristics are excellent
because of the use of magnetically shielded
structure.
4. Small size (2.0x1.25mm) and light weight
5. The series has excellent solder heat resistance.
Both flow and reflow soldering can be employed.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
DC Resistance
Part Number
EIA
(µH)
(MHz)
(ohm)
LQM21FN1R0N00
LQM21FN2R2N00
LQM21FN4R7N00
LQM21FN100N00
LQM21FN220N00
LQM21FN470N00
1.0 ±30%
2.2 ±30%
4.7 ±30%
10 ±30%
22 ±30%
47 ±30%
1
1
1
1
1
1
220
150
80
60
13
7
0.20 ±30%
0.28 ±30%
0.30 ±30%
0.50 ±30%
0.35 ±30%
0.60 ±30%
105
70
0805
0805
0805
0805
0805
0805
25
15
15
9
7.5
Operating Temp. Range: -40°C to +85°C
■ Inductance-Current Characteristics
■ Impedance-Frequency Characteristics
LQM21F_00
LQM21F_00
100
100000
47µH
22µH
10000
47µH
10µH
10
22µH
10µH
4.7µH
1000
2.2µH
100
1.0µH
4.7µH
1
2.2µH
10
1.0µH
1
0.1
1
10
100
1000
1
10
100
1000
Frequency (MHz)
DC Current (mA)
49
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQM21F_70 Series
0.5±0.3
Electrode
■ Features
Rated Current is larger than previous (LQM21F_00)
series.
Rated Current: 100mA (10 micro H)
1.25±0.2
2.0±0.2
(in mm)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
DC Resistance
(ohm)
Part Number
EIA
(µH)
(MHz)
LQM21FN4R7M70
LQM21FN100M70
4.7 ±20%
10 ±20%
1
1
120
100
0.35 ±30%
0.60 ±30%
25
15
0805
0805
Operating Temp. Range: -55°C to +125°C
■ Inductance-Current Characteristics
■ Impedance-Frequency Characteristics
LQM21F_70
LQM21F_70
10000
100
1000
10µH
10
10µH
47µH
4.7µH
100
10
1
1
9
0.1
10
10
100
1000
1
10
100
1000
Frequency (MHz)
DC Current (mA)
50
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQM31F Series
0.7±0.3
LQM31F series consists of magnetically shielded chip
coils based on Murata's technologies of multilayer
process and magnetic materials. Excellent direct
current characteristics and low DC resistance are
realized by using magnetic materials which have
excellent saturation characteristics and high
permeability.
1.6±0.2
3.2±0.2
■ Features
1. LQM31F series is suitable for power line choke
because of its excellent direct current
characteristics and large rated current (70mA at
10 micro H).
(in mm)
2. Low DC resistance is realized.
3. The crosstalk characteristics are excellent
because of magnetically shielded structure.
4. Low profile 1.0mm
5. The series has excellent solder heat resistance.
Both flow and reflow soldering can be employed.
■ Applications
Circuits for DC power line choke of telecommunications
equipment such as PDAs, Note-PCs, digital cameras, MD
and DVD-RAM
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Part Number
EIA
(µH)
LQM31FN100M00
10 ±20%
1
70
0.50 max.
20
1206
9
Operating Temp. Range: -40°C to +85°C
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
LQM31F
LQM31F
10000
100
1000
100
10
10
1
1
1
10
100
1000
1
10
100
Frequency (MHz)
DC Current (mA)
51
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
for Choke Wound Type LQH31C/LQH32C/LQH43C Series
LQH31C Series
2.3±0.2
1.6±0.2
■ Features
LQH31C series consists of miniature chip inductors
with low DC resistance, high current capacity, and
high impedance characteristics. It is suitable for use
1.6±0.2
as choke coils in DC power supply circuits. High rated
3.2±0.3
current up to 970mA is available.
(in mm)
0.7min.
0.7min. 0.7min.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Part Number
EIA
(µH)
LQH31CNR12M03
LQH31CNR22M03
LQH31CNR47M03
LQH31CN1R0M03
LQH31CN2R2M03
LQH31CN4R7M03
LQH31CN100K03
LQH31CN220K03
LQH31CN470K03
LQH31CN101K03
0.12 ±20%
0.22 ±20%
0.47 ±20%
1.0 ±20%
2.2 ±20%
4.7 ±20%
10 ±10%
1
1
1
1
1
1
1
1
1
1
970
850
700
510
430
340
230
160
100
80
0.08 ±40%
0.1 ±40%
0.15 ±40%
0.28 ±30%
0.41 ±30%
0.65 ±30%
1.3 ±30%
3.0 ±30%
8.0 ±30%
12 ±30%
250
250
180
100
50
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
31
20
22 ±10%
14
47 ±10%
10
100 ±10%
7
Operating Temp. Range: -25°C to +85°C
10
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
1000
100
100µH
100µH
10µH
100
10
1.0µH
1
0.1
10µH
10
0.01
0.01
0.1
1
10
100
1000
Frequency (MHz)
1.0µH
1
5
10
50
100
500
Current (mA)
52
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
2.5±0.2
2.5±0.2
LQH32C series consists of miniature chip coils with
low DC resistance, high current capacity, and high
impedance characteristics. These features are made
possible by the development of Murata's innovative
automatic wound techniques.
2.5±0.2
3.2±0.3
■ Features (LQH32C_23/_33)
1. Low DC resistance, high rated current and high
inductance. Inductance: 0.15 to 560 micro H.
2. The series exhibits low voltage drops and small
variations in inductance with respect to
temperature rise and DC current level. This makes
them excellent for use as power supply line choke
coils.
LQH32C_23/_33
0.9±0.3 1.3±0.2 0.9±0.3
(in mm)
3. The series has excellent solder heat resistance.
Both flow and reflow soldering methods can be
employed.
LQH32C_23 Series
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Part Number
Test Frequency
EIA
(µH)
LQH32CN1R0M23
LQH32CN2R2M23
LQH32CN4R7M23
LQH32CN100K23
LQH32CN220K23
LQH32CN470K23
LQH32CN101K23
LQH32CN221K23
LQH32CN331K23
LQH32CN391K23
LQH32CN471K23
LQH32CN561K23
1.0 ±20%
2.2 ±20%
4.7 ±20%
10 ±10%
22 ±10%
47 ±10%
100 ±10%
220 ±10%
330 ±10%
390 ±10%
470 ±10%
560 ±10%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1kHz
800
600
450
300
250
170
100
70
0.09 ±30%
0.13 ±30%
0.2 ±30%
0.44 ±30%
0.71 ±30%
1.3 ±30%
3.5 ±30%
8.4 ±30%
10 ±30%
17 ±30%
19 ±30%
22 ±30%
96
64
43
26
19
15
10
6.8
5.6
5
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
60
60
60
5
1kHz
60
5
10
Operating Temp. Range: -25°C to +85°C
LQH32C_33 Series (Low DC Resistance Type)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(MHz)
DC Resistance
(ohm)
Part Number
EIA
(µH)
LQH32CNR15M33
LQH32CNR27M33
LQH32CNR47M33
LQH32CN1R0M33
LQH32CN2R2M33
LQH32CN4R7M33
LQH32CN100K33
0.15 ±20%
0.27 ±20%
0.47 ±20%
1.0 ±20%
2.2 ±20%
4.7 ±20%
10 ±10%
1
1
1
1
1
1
1
1450
1250
1100
1000
790
0.028 ±30%
0.034 ±30%
0.042 ±30%
0.06 ±30%
0.097 ±30%
0.15 ±30%
0.3 ±30%
400
250
150
100
64
1210
1210
1210
1210
1210
1210
1210
650
43
450
26
Operating Temp. Range: -25°C to +85°C
53
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
LQH32C_23/_33
LQH32C_23/_33
1000
1000
100
100µH
100µH
100
10µH
10
1
10µH
1.0µH
10
0.1
1.0µH
1
0.01
0.01
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency (MHz)
DC Current (mA)
10
54
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQH32C_53 Series (Low Profile Type)
2.5±0.2
2.5±0.2
LQH32C_53 series consists of miniature chip coils
with low DC resistance, high current capacity, and
high impedance characteristics. These features are
made possible by the development of Murata's
innovative wound techniques. They are excellent
for use as choke coils in DC power supply circuits.
The LQH32C_53 series has achieved Max 1.7mm height
and high rated current.
A
A
3.2±0.3
2.5±0.2
A : 2.8 max.
■ Features
0.9±0.3 1.3±0.2 0.9±0.3
(in mm)
1. The series has a wide inductance range of
1.0 to 100 micro H.
2. The series exhibit low voltage drops and small
variations in inductance with respect to
temperature rise and DC current level. This makes
them excellent for use as power supply line choke
coils.
3. The series has excellent solder heat resistance.
Both flow and reflow soldering methods can be
employed.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
DC Resistance
(ohm)
Part Number
EIA
(µH)
(MHz)
LQH32CN1R0M53
LQH32CN2R2M53
LQH32CN4R7M53
LQH32CN100K53
LQH32CN150K53
LQH32CN220K53
LQH32CN330K53
LQH32CN470K53
LQH32CN680K53
LQH32CN101K53
1.0 ±20%
2.2 ±20%
4.7 ±20%
10 ±10%
15 ±10%
22 ±10%
33 ±10%
47 ±10%
68 ±10%
100 ±10%
1
1
1
1
1
1
1
1
1
1
1000
790
650
450
300
250
200
170
130
100
0.060 ±30%
0.097 ±30%
0.15 ±30%
0.30 ±30%
0.58 ±30%
0.71 ±30%
1.1 ±30%
100
64
43
26
26
19
17
15
12
10
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1.3 ±30%
2.2 ±30%
10
3.5 ±30%
Operating Temp. Range: -25°C to +85°C
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
LQH32C_53
LQH32C_53
1000
100
100uH
100uH
10
100
10uH
1
10uH
10
1.0uH
0.1
1.0uH
1
0.01
0.1
0.001
1000
1
10
100
1000
1
10
100
Frequency (MHz)
DC Current (mA)
55
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQH43C Series
3.2±0.2
3.6±0.2
LQH43C series consists of miniature chip inductors
with low DC resistance, high current capacity, and
high impedance characteristics. It is suitable for use
as choke coils in DC power supply circuits.
3.2±0.2
4.5±0.3
■ Features
1. Various inductance ranges are available.
2. The series exhibits low voltage drops and small
change in inductance with respect to temperature
rise and DC current level. This makes them
excellent to use as power supply line choke coils.
3. Small size 4.5x3.2mm and realized low height
2.8mm max.
(in mm)
1.0min. 1.0min. 1.0min.
4. The series has excellent solder heat resistance.
Both flow and reflow soldering methods can be
employed.
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Part Number
Test Frequency
EIA
(µH)
LQH43CN1R0M03
LQH43CN1R5M03
LQH43CN2R2M03
LQH43CN3R3M03
LQH43CN4R7M03
LQH43CN6R8M03
LQH43CN100K03
LQH43CN150K03
LQH43CN220K03
LQH43CN330K03
LQH43CN470K03
LQH43CN680K03
LQH43CN101K03
LQH43CN151K03
LQH43CN221K03
LQH43CN331K03
LQH43CN471K03
1.0 ±20%
1.5 ±20%
2.2 ±20%
3.3 ±20%
4.7 ±20%
6.8 ±20%
10 ±10%
15 ±10%
22 ±10%
33 ±10%
47 ±10%
68 ±10%
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1kHz
1080
1000
900
800
750
720
650
570
420
310
280
220
190
130
110
100
90
0.08 max.
0.09 max.
0.11 max.
0.13 max.
0.15 max.
0.20 max.
0.24 max.
0.32 max.
0.6 max.
1.0 max.
1.1 max.
1.7 max.
2.2 max.
3.5 max.
4.0 max.
6.8 max.
8.5 max.
100
85
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
60
47
35
30
23
20
15
12
10
8.4
6.8
5.5
4.5
3.6
3.0
10
Operating Temp. Range: -25°C to +85°C
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
1000
1000
100µH
100
100µH
100
10µH
10
1.0µH
10µH
10
1
1.0µH
1
0.1
0.1
0.01
1
10
100
1000
10000
0.01
0.1
1
10
100
1000
DC Current (mA)
Frequency (MHz)
56
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
for Choke Magnetic Shielded Type LQH3KS Series
LQH3KS_23 Series
3.3±0.3
■ Features
1. Low profile dimension (2.1mm max.) and small size
of 1212 (3.3x3.3mm) are suitable for portable
equipment.
3.3±0.3
2. The series has low DC Resistance.
3. Large inductance of 560 to 2200 micro H
4. Magnetically shielded structure prevents
interference occurring between peripheral
components.
0.9
±0.3
1.3
±0.2 ±0.3
0.9
(in mm)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
Test Frequency
(kHz)
DC Resistance
(ohm)
Part Number
EIA
(µH)
LQH3KSN561N23
LQH3KSN681N23
LQH3KSN102N23
LQH3KSN152N23
LQH3KSN222N23
560 ±30%
680 ±30%
1000 ±30%
1500 ±30%
2200 ±30%
100
100
10
50
40
30
25
20
7.8 ±30%
9.1 ±30%
11 ±30%
23 ±30%
28 ±30%
3.0
2.6
2.1
1.7
1.5
1212
1212
1212
1212
1212
10
10
Operating Temp. Range: -25°C to +85°C
Only for reflow soldering.
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
1000
10000
2200µH
1000µH
100
2200µH
1000µH
1000
560µH
10
560µH
11
1
0.1
100
10
0.01
0.01
0.1
1
10
1
10
100
Frequency (MHz)
DC Current (mA)
57
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
LQH3KS_53 Series (Low Profile Type)
3.3±0.3
LQH3KS_53 series is miniature chip inductor with high
current capacity and low DC resistance. These features
are achieved by Murata's innovative winding technology.
3.3±0.3
■ Features
1. Low profile (1.8mm max.) and small size (3.3x3.3mm)
2. The series has large inductance of 3.3 to 820
micro H.
3. Low DC resistance
0.9
±0.3
1.3
±0.2 ±0.3
0.9
(in mm)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Part Number
Test Frequency
EIA
(µH)
LQH3KSN3R3N53
LQH3KSN4R7N53
LQH3KSN6R8N53
LQH3KSN100M53
LQH3KSN220M53
LQH3KSN330M53
LQH3KSN471M53
LQH3KSN561M53
LQH3KSN821M53
3.3 ±30%
4.7 ±30%
6.8 ±30%
10 ±20%
22 ±20%
33 ±20%
470 ±20%
560 ±20%
820 ±20%
1MHz
1MHz
320
260
210
180
120
100
30
0.07 ±30%
0.09 ±30%
0.10 ±30%
0.17 ±30%
0.40 ±30%
0.50 ±30%
6.90 ±30%
7.60 ±30%
15.5 ±30%
50
42
1212
1212
1212
1212
1212
1212
1212
1212
1212
1MHz
35
1MHz
28
1MHz
19
1MHz
16
100kHz
100kHz
100kHz
4.2
3.8
3.2
30
20
Operating Temp. Range: -25°C to +85°C
Only for reflow soldering.
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
1000
10000
820µH
100
470µH
1000
100
10
820µH
470µH
10
33µH
1
33µH
11
10µH
0.1
10µH
4.7µH
4.7µH
0.01
1
1
10
100
1000
1
10
100
DC Current (mA)
1000
Frequency (MHz)
58
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Chip Coils
for Choke Wound/Magnetic Shielded Type LQH55D/LQH66S Series
LQH55D Series
5.0±0.3
5.0±0.3
LQH55D series are winding type coils for choke by
using high performance thick wire wound technology.
■ Features
1. Low direct current resistance, large current
5.7±0.3
capacity and large inductance
2. For DC-DC converters and DC power supply circuits
EIA Code:2220
1.3
min.
1.7
min.
1.3
min.
(in mm)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Part Number
Test Frequency
EIA
(µH)
LQH55DNR12M03
LQH55DNR27M03
LQH55DNR47M03
LQH55DN1R0M03
LQH55DN1R5M03
LQH55DN2R2M03
LQH55DN3R3M03
LQH55DN4R7M03
LQH55DN6R8M03
LQH55DN100M03
LQH55DN150M03
LQH55DN220M03
LQH55DN330M03
LQH55DN470M03
LQH55DN680M03
LQH55DN101M03
LQH55DN151M03
LQH55DN221M03
LQH55DN331M03
LQH55DN471M03
LQH55DN681M03
LQH55DN102M03
LQH55DN222M03
LQH55DN472M03
LQH55DN103M03
0.12 ±20%
0.27 ±20%
0.47 ±20%
1.0 ±20%
1.5 ±20%
2.2 ±20%
3.3 ±20%
4.7 ±20%
6.8 ±20%
10 ±20%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
100kHz
100kHz
100kHz
100kHz
100kHz
100kHz
10kHz
10kHz
10kHz
10kHz
6000
5300
4800
4000
3700
3200
2900
2700
2000
1700
1400
1200
900
0.007 ±40%
0.010 ±40%
0.013 ±40%
0.019 ±40%
0.022 ±40%
0.029 ±40%
0.036 ±40%
0.041 ±40%
0.074 ±40%
0.093 ±40%
0.15 ±40%
0.19 ±40%
0.32 ±40%
0.40 ±40%
0.67 ±40%
0.86 ±40%
1.9 ±40%
450
300
200
150
110
80
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
40
30
25
20
15 ±20%
17
22 ±20%
15
33 ±20%
12
47 ±20%
800
10
68 ±20%
640
7.6
6.5
5.0
4.0
3.1
2.4
1.9
1.7
1.2
0.8
0.5
100 ±20%
150 ±20%
220 ±20%
330 ±20%
470 ±20%
680 ±20%
1000 ±20%
2200 ±20%
4700 ±20%
10000 ±20%
560
420
320
2.4 ±40%
270
4.4 ±40%
240
5.4 ±40%
12
190
8.1 ±40%
150
10.3 ±40%
21.5 ±40%
43.6 ±40%
100 ±40%
100
70
50
Operating Temp. Range: -25°C to +80°C
Only for reflow soldering.
59
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
1000000
100000
10000µH
10000
10000µH
10000
1000µH
1000
1000µH
100µH
1000
100
10
1
10µH
1µH
100µH
100
0.01
0.1
1
10
100
1000
Frequency (MHz)
10µH
10
1µH
1
0.01
0.1
1
10
DC Current (A)
LQH66S Series
6.3±0.3
6.3±0.3
LQH66S series are magnetic shielded type coils
for choke by using high performance thick wire
wound technology.
6.3±0.3
■ Features
1. Low direct current resistance, large current
capacity and large inductance
2. High density mounting
EIA Code:2525
3. For DC-DC converters and DC power supply circuits
1.3
min.
1.7
min.
1.3
min.
(in mm)
Rated
Current
(mA)
Self Resonance
Frequency (min.)
(MHz)
Inductance
DC Resistance
(ohm)
Part Number
Test Frequency
EIA
(µH)
LQH66SNR27M03
LQH66SNR68M03
LQH66SN1R0M03
LQH66SN1R5M03
LQH66SN2R2M03
LQH66SN3R3M03
LQH66SN4R7M03
LQH66SN6R8M03
LQH66SN100M03
LQH66SN150M03
LQH66SN220M03
LQH66SN330M03
LQH66SN470M03
LQH66SN680M03
LQH66SN101M03
LQH66SN151M03
LQH66SN221M03
LQH66SN331M03
LQH66SN471M03
LQH66SN681M03
LQH66SN102M03
LQH66SN222M03
LQH66SN472M03
LQH66SN103M03
0.27 ±20%
0.68 ±20%
1.0 ±20%
1.5 ±20%
2.2 ±20%
3.3 ±20%
4.7 ±20%
6.8 ±20%
10 ±20%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
100kHz
100kHz
100kHz
100kHz
100kHz
100kHz
10kHz
10kHz
10kHz
10kHz
6000
5300
4700
3800
3300
2600
2200
1800
1600
1300
1100
860
0.007 ±40%
0.010 ±40%
0.013 ±40%
0.016 ±40%
0.019 ±40%
0.022 ±40%
0.025 ±40%
0.029 ±40%
0.036 ±40%
0.069 ±40%
0.087 ±40%
0.14 ±40%
0.17 ±40%
0.29 ±40%
0.36 ±40%
0.63 ±40%
0.79 ±40%
1.8 ±40%
300
180
150
110
80
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
2525
40
30
25
12
20
15 ±20%
17
22 ±20%
15
33 ±20%
12
47 ±20%
760
10
68 ±20%
600
7.6
6.5
5.0
4.0
3.2
2.5
2.0
1.7
1.2
0.8
0.5
100 ±20%
150 ±20%
220 ±20%
330 ±20%
470 ±20%
680 ±20%
1000 ±20%
2200 ±20%
4700 ±20%
10000 ±20%
520
420
350
280
240
2.2 ±40%
200
3.9 ±40%
160
4.9 ±40%
100
9.4 ±40%
70
19.5 ±40%
39.7 ±40%
50
Operating Temp. Range: -25°C to +80°C
Only for reflow soldering.
60
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
■ Impedance-Frequency Characteristics
■ Inductance-Current Characteristics
1000000
100000
10000µH
10000
10000µH
10000
1000µH
1000
1000µH
100µH
1000
100
10
1
10µH
1µH
100µH
100
0.01
0.1
1
10
100
1000
Frequency (MHz)
10µH
10
1µH
1
0.01
0.1
1
10
DC Current (A)
12
61
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
!Caution/Notice
■ !Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
■ Notice (Storage and Operating Condition)
<Operating Environment>
Do not store them in chemical atmosphere such
as one containing sulfurous acid gas or
alkaline gas.
Do not use products in chemical atmosphere such as
chlorine gas, acid or sulfide gas.
<Storage Requirements>
This will prevent electrode oxidation which
causes poor solderability and possible
corrosion of coils.
1. Storage Period
LQG/LQM series should be used within 6 months; the
other products should be used within 12 months.
Check solderability if this period is exceeded.
2. Storage conditions
(2) Do not store products in bulk packaging to
prevent collision among coils which causes core
chipping and wire breakage.
(1) Store products in a warehouse in compliance with
the following conditions:
(3) Store products on pallets to protect from
humidity, dust, etc.
Temperature: -10 to 40 degree C.
(4) Avoid heat shock, vibration, direct sunlight,
etc.
Humidity: 30 to 70% (relative humidity)
Do not subject products to rapid changes in
temperature and humidity.
12
62
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
!Caution/Notice
■ Notice (Soldering and Mounting)
1. Standard Land Dimensions
A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip coil
electrode.
Land Pattern
Solder Resist
(in mm)
Series
Standard Land Dimensions
LQG15H
LQG18H
LQM18N
LQM21N/21D/21F
LQM31F
LQP03T
LQP15M/15T
LQP18M
LQH2MC
LQW15A
LQW18A
LQW2BH
Part Number
LQG15H
a
b
c
0.5-0.6
0.6-0.8
1.4-1.5
1.8-2.2
2.2-2.6
1.8-2.0
3.0-4.0
4.2-5.2
0.8-0.9
1.4-1.5
1.8-2.2
2.6
0.4
LQG18H
0.6-0.8
Flow
LQM18N
0.7
0.7
Reflow
LQM21N/21D/21F
LQM31F
1.0
1.2
1.2
2.0
LQP03T
0.2-0.3
0.5-0.6
0.7-0.9
1.0
0.2-0.3
0.4
LQP15M/15T
LQP18M
LQW31H
LQH31M/31C/31H
c
0.6-0.8
0.8
b
LQH2MC
LQH31M/31C/31H
LQW31H
1.5
4.5
1.0
LQW2BH
1.2
0.7-1.0
0.65
3.0
1.8-2.0
1.2
0.8
0.6-0.8
0.50
LQW18A
LQW15A
5.5
LQH32M
LQH32C
LQH3KS
1.0 1.3 1.0
7.5
LQH43M
LQH43N
LQH43C
1.5 1.5 1.5
8.0
LQH55D
LQH66S
12
2.0
3.0
3.0
Attention should be paid to potential magnetic coupling effects when using the coil as a resonator.
Continued on the following page.
63
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
!Caution/Notice
Continued from the preceding page.
2. Standard Soldering Conditions
(1) Soldering method
Chip coils can be flow or reflow soldered.
Please contact Murata regarding other soldering
methods.
As for LQG, LQP, LQW15A/18A, LQH2MC/3KS/55D/66S
series, please use reflow soldering.
Solder: Use H60A, H63A (JIS Z 3282) or equivalent.
Use solder paste equivalent to H60A for
LQP03T/15M/15T/18M and LQG15H/18H.
In case of Lead-free solder, use Sn-3.0Ag-0.5Cu
solder.
Flux: Use rosin-based flux, but not strongly acidic flux (with
chlorine content exceeding 0.2wt%).
Do not use water-soluble flux.
The flux used for LQW15/18 series should use the
rosin-based flux that includes middle activator
equivalent to 0.06wt% to 0.1wt% chlorine.
For additional mounting methods, please contact Murata.
(2) Soldering profile
oFlow Soldering profile
(Eutectic solder, Sn-3.0Ag-0.5Cu solder)
T3
T2
t2
Limit Profile
Heating
T1
Standard Profile
Pre-heating
t1
time (s)
Standard Profile
Heating
Limit Profile
Heating
Pre-heating
Series
Cycle
Cycle
of flow
of flow
Temp. (T1)
Time. (t1)
Temp. (T2) Time. (t2)
Temp. (T3)
Time. (t2)
LQM18N
LQM21N/21D/21F
LQM31F
LQW2BH/31H
LQH31C/31H/31M
150°C
60s min.
250°C
250°C
4 to 6s
4 to 6s
265±3°C
5s max.
2 times
2 times
2 times
1 times
12
LQH32C/32M
LQH43C/43M(N)
150°C
60s min.
265±3°C
5s max.
Continued on the following page.
64
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
!Caution/Notice
Continued from the preceding page.
oReflow Soldering profile
qSoldering profile for Lead-free solder (Sn-3Ag-0.5Cu)
T4
T3
T2
T1
180
150
Limit Profile
t1
t2
Pre-heating
Standard Profile
90±30s
time (s)
Standard Profile
Limit Profile
Peak
Peak
temperature
(T2)
Series
Heating
Heating
Cycle
of reflow
Cycle
temperature
(T4)
of reflow
Temp. (T1)
Time. (t1)
Temp. (T3)
Time. (t2)
LQG15H/18H
LQW15A/18A
LQP03T/15M/15T/18M
LQW2BH/31H
LQM18N
LQM21N/21D/21F
LQM31F, LQH2MC
LQH31C/31H/31M
220°C
220°C
30 to 60s
245±3°C
245±3°C
2 times
2 times
230°C
60s max. 260°C/10s
2 times
1 times
LQH32C/32M
LQH43C/43M(N)
LQH55D, LQH66S
LQH3KS
30 to 60s
230°C
60s max. 260°C/10s
wSoldering profile for Eutectic solder (Limit profile: refer to q)
T3
T2
T1
t2
Standard Profile
t1
time (s)
Standard Profile
Pre-heating
Series
Peak
temperature
(T3)
Heating
Cycle
of reflow
Temp. (T1)
Time. (t1)
Temp. (T2)
Time. (t2)
LQG15H/18H
LQW15A/18A
LQP03T/15T/15M/18M
LQW2BH/31H
12
LQH31H, LQM18N
LQM21N/21D/21F
LQM31F, LQH2MC
LQH31C, LQH32C
LQH31M, LQH32M
LQH43C, LQH43M(N)
LQH3KS, LQH55D
LQH66S
150°C
60s min.
183°C
60s max.
230°C
2 times
Continued on the following page.
65
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
!Caution/Notice
Continued from the preceding page.
(3) Reworking with Soldering Iron
Preheating at 150°C for 1 minute is required. Do not
directly touch the ceramic element with the tip of the
soldering iron. The reworking soldering conditions are as
follows:
Soldering iron power output: 30W max.
Temperature of soldering iron tip: 280°C
Diameter of soldering iron end: 3.0mm max.
Soldering time: within 3 s
3. Mounting Instructions
(1) Land Pattern Dimensions
Solder Resist
Land
Large lands reduce Q of the mounted chip. Also, large
protruding land areas (bordered by lines having
dimensions 'c' and 'd' shown) cause floating and
electrode leaching.
c
d
(2) Magnetic Coupling
Magnetic Coupling
Since some chip coils are constructed like an open
magnetic circuit, narrow spacing between coils may
cause magnetic coupling.
The LQG, LQM and LQH3KS/66S series have a
magnetically shielded structure. The structure makes
their coupling coefficient smaller than that of
conventional chip coils.
(3) PCB Warping
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.
a
b
Products should be located in the sideways direction
(Length: a<b) to the mechanical stress.
Poor example
Good example
(4) Amount of Solder Paste
Excessive solder causes electrode corrosion, while
insufficient solder causes low electrode bonding strength.
Adjust the amount of solder paste as shown on the right
so that solder is applied.
12
LQH_C/D/H/M/N
LQW_H
LQH_S
o Standard thickness of solder paste
LQP/LQG/LQM/LQW_A: 100 to 150µm
LQH/LQW_H: 200 to 300µm
(LQH2MC: 100 to 150µm)
LQP/LQG/LQM
LQW_A
Continued on the following page.
66
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
!Caution/Notice
Continued from the preceding page.
(5) Amount of Adhesive
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering. Apply the
adhesive in accordance with the following conditions:
LQH_C/H/M/N
LQW_H
LQP/LQG/LQM
Typical Application Amount (in:mg)
Part Number
MR-8153RA
0.05-0.06
0.15-0.20
0.20-0.25
0.116-0.18
NF-3000
0.06-0.07
0.20-0.25
0.25-0.30
–
LQM18N
LQM21N/21D/21F
LQM31F
LQW2BH
LQH31M/31C/31H
LQW31H
0.18-0.20
0.20-0.23
0.45-0.50
0.20-0.25
0.27-0.35
0.60-0.80
LQH32M/32C
LQH43M(N)
LQH43C
4. Cleaning
The following conditions should be observed when
cleaning chip coils:
individual components. Evaluation in complete assembly
should be done prior to production.
(1) Cleaning Temperature: 60°C max. (40°C max. for
alcohol cleaning agents)
(a) Alcohol cleaning agents
Isopropyl alcohol (IPA)
(2) Ultrasonic
(b) Aqueous cleaning agents
Output: 20W/l max.
Pine Alpha ST-100S
Duration: 5 minutes max.
LQH_S series: Aqueous agents should not be used
because they may cause quality deterioration.
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agents have been removed with deionized water.
Frequency: 28 to 40kHz
Care should be taken not to cause resonance of the
PCB and mounted products.
(3) Cleaning agent
The following cleaning agents have been tested on
For additional cleaning methods, please contact Murata.
12
67
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
!Caution/Notice
■ Notice (Handling)
This item is designed to have sufficient strength,
but handle with care to avoid chipping or breaking
its ceramic structure.
LQM series
• There is the possibility that magnetism may change
the inductance value. Do not use a magnet or tweezers
with magnetism when handling chip coils. (The tip of
the tweezers should be molded with resin or pottery.)
<Handling>
LQW_A series
• To prevent breaking the wire, avoid touching sharp
material, such as tweezers, to the winding portion.
• To prevent breaking the core, avoid applying
excessive mechanical shock to products mounted on
the board.
1. Avoid applying excessive stress to products to
prevent damage.
2. Do not touch winding with sharp objects such as
tweezers to prevent wire breakage.
3. Do not apply excessive force to products
mounted on boards to prevent core breakage.
<Transportations>
• In some mounting machines, when picking up
components, support pin pushes up the components
from the bottom of base tape. In this case, please
remove the support pin. The support pin may damage
the components and break wire.
Do not apply excessive vibration or mechanical
shock to products.
LQH_C/D/H/M/N, LQW_H series
• To prevent breaking the wire, avoid touching sharp
material, such as tweezers, to the winding portion.
• To prevent breaking the core, avoid applying
excessive mechanical shock to products mounted on
the board.
<Resin Coating>
When coating products with resin, the relatively
high resin curing stress may change inductance
values.
For exterior coating, select resin carefully so
that electrical and mechanical performance of the
product is not affected.
LQP series
• The pattern of the chip coil is covered with
protective film. Take care to avoid damaging the
chip coil when handling it with pick-up nozzles,
sharp instruments, etc.
■ Notice (Measuring Method)
Measuring Method of Inductance/Q
1. Residual elements and stray elements of test fixture can
be described by F-parameter shown in following.
3. Thus, the relation between Zx and Zm is following;
Zm - β
where, α = D / A = 1
β = B / D = Zsm - (1 - Yom Zsm) Zss
Zx = α
1 - ZmΓ
I1
I2
Γ = C / A = Yom
Zsm: measured impedance of short chip
Zss: residual impedance of short chip*
Yom: measured admittance when opening the fixture
A
C
B
D
V1
I1
A
C
B
D
V2
I2
=
Zm
Zx
V2
V1
*Residual impedance of short chip
Test Head
Test fixture
Product
Residual Impedance
0nH
Series
LQG15HS
LQP03T
2. The impedance of chip coil Zx and measured value Zm
can be described by input/output current/voltage.
0.430nH
0.556nH
0.771nH
LQG15HN, LQW15A, LQP15T/M
LQG18H, LQP18M, LQW18A
V1
I1
V2
I2
12
Zm =
Zx =
,
4. Lx and Qx shall be calculated with the following equation.
Lx: Inductance of chip coil
Qx: Q of chip coil
f: Measuring frequency
Im (Zx)
Im (Zx)
Re (Zx)
Lx =
Qx =
,
2πf
68
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Packaging
Minimum Quantity and 8mm Width Taping Dimension
LQG15H,
LQP15M/18M
LQP03T/15T,
LQW15A
+0.1
2.0±0.05 2.0±0.05
4.0±0.1
ø1.5
-0
c
c
a
Direction of feed
Paper Tape
Dimensions (in mm)
Minimum Qty. (pcs.)
Part Number
a
b
c
ø180mm reel ø330mm reel
Bulk
0.62
0.38
0.62
0.70
1.19
1.12 0.8 max.
0.68 0.55 max.
1.12
1000
LQG15H
50000
LQP03T
10000
-
LQP15T
1.20
50000
LQP15M
500
2.0
0.8 max.
4000
10000
LQP18M
0.64/0.66
0.69
LQW15A_00
LQW15A_10
1.18
10000
-
0.66
0.69 (1.5-2.7nH, 3.9-4.7nH, 5.8-6.8nH, 8.2-9.5nH, 11nH, 12nH, 15nH)
0.66 (2.9nH, 5.1nH, 7.3nH, 7.5nH, 10nH, 13nH, 16-23nH, 100nH, 120nH)
0.64 (24-91nH)
<Plastic>
<Paper>
1
+0.1
ø1.5
0.2
-0
4.0±0.1
2.0±0.05
4.0±0.1
a
c
c
Direction of feed
LQW2BH
1 : 0.3
Paper Tape
Dimensions (in mm)
Minimum Qty. (pcs.)
Part Number
a
b
c
ø180mm reel ø330mm reel
Bulk
LQM21N (0.1-2.2µH)
LQM21D (1-10µH)
LQM21F (1-2.2µH)
LQG18H
1.45
2.25
1000
1.1
max.
4000
10000
1.05
1.85
LQM18N
12
1.0
1.1
1.8
1.9
LQW18A_00
500
LQW18A_10
Plastic Tape
Dimensions (in mm)
Minimum Qty. (pcs.)
Part Number
a
b
c
ø180mm reel ø330mm reel
Bulk
LQM21N (2.7-4.7µH)
LQM21D (22-47µH)
LQM21F (4.7-47µH)
LQM31F
1.45
2.25
1.3
3000
10000
1000
1.9
1.9
3.5
3.6
2.3
1.3
2.0
LQH31M/31C/31H, LQW31H
LQW2BH
1.75
2000
3000
7500
-
-
-
2.1
1.7
LQH32M, LQH32C_33/_23
LQH32C_53
2.9
1.9
3.6
2.3
1.05
LQH2MC
(in mm)
Continued on the following page.
69
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Packaging
Continued from the preceding page.
Minimum Quantity and 12mm Width Plastic Taping Dimension
2.0±0.1
d
4.0±0.1
+0.1
-0
8.0±0.1
ø1.5
a
c
Direction of feed
Plastic Tape
Dimensions (in mm)
Minimum Qty. (pcs.)
Part Number
a
b
c
d
ø180mm reel ø330mm reel
3.9
3.7
1.9
1000
4000
2500
-
LQH3KS
LQH43M(N)
LQH43C
LQH55D
LQH66S
0.3
3.6
4.9
2.7
500
5.4
6.7
6.1
6.7
5.0
5.6
1500
-
0.4
350
(in mm)
12
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
oEKLMQG15A (High-frequency Monolithic Type)
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
1.0nH
1.1nH
1.2nH
1.3nH
1.5nH
1.6nH
1.8nH
2.0nH
2.2nH
2.4nH
2.7nH
3.0nH
3.3nH
3.6nH
3.9nH
4.3nH
4.7nH
5.1nH
5.6nH
6.2nH
6.8nH
7.5nH
8.2nH
9.1nH
10nH
12nH
15nH
18nH
22nH
27nH
33nH
39nH
47nH
56nH
68nH
82nH
100nH
120nH
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±5%
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.12
0.15
0.16
0.17
0.18
0.19
0.19
0.19
0.21
0.23
0.24
0.26
0.27
0.29
0.31
0.33
0.34
0.35
0.41
0.46
0.51
0.58
0.67
0.67
1.06
1.15
1.20
1.25
1.60
1.60
1.60
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
200
200
200
200
180
150
150
150
1
LQG15HN1N0S02
LQG15HN1N1S02
LQG15HN1N2S02
LQG15HN1N3S02
LQG15HN1N5S02
LQG15HN1N6S02
LQG15HN1N8S02
LQG15HN2N0S02
LQG15HN2N2S02
LQG15HN2N4S02
LQG15HN2N7S02
LQG15HN3N0S02
LQG15HN3N3S02
LQG15HN3N6S02
LQG15HN3N9S02
LQG15HN4N3S02
LQG15HN4N7S02
LQG15HN5N1S02
LQG15HN5N6S02
LQG15HN6N2S02
LQG15HN6N8J02
LQG15HN7N5J02
LQG15HN8N2J02
LQG15HN9N1J02
LQG15HN10NJ02
LQG15HN12NJ02
LQG15HN15NJ02
LQG15HN18NJ02
LQG15HN22NJ02
LQG15HN27NJ02
LQG15HN33NJ02
LQG15HN39NJ02
LQG15HN47NJ02
LQG15HN56NJ02
LQG15HN68NJ02
LQG15HN82NJ02
LQG15HNR10J02
LQG15HNR12J02
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
±5%
±5%
±5%
12
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Continued on the following page.
71
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
oEKLMQ15SB (High-frequency Monolithic Type)
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
1.0nH
1.1nH
1.2nH
1.3nH
1.5nH
1.6nH
1.8nH
2.0nH
2.2nH
2.4nH
2.7nH
3.0nH
3.3nH
3.6nH
3.9nH
4.3nH
4.7nH
5.1nH
5.6nH
6.2nH
6.8nH
7.5nH
8.2nH
9.1nH
10nH
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±5%
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
0.07
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.12
0.15
0.15
0.17
0.17
0.18
0.18
0.18
0.18
0.20
0.20
0.22
0.24
0.24
0.24
0.26
0.26
0.28
0.32
0.36
0.42
0.46
0.58
0.65
0.72
0.82
0.92
1.20
1.25
1.30
2.99
3.38
3.77
4.94
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
200
200
200
200
180
150
150
150
140
130
120
110
1
LQG15HS1N0S02
LQG15HS1N1S02
LQG15HS1N2S02
LQG15HS1N3S02
LQG15HS1N5S02
LQG15HS1N6S02
LQG15HS1N8S02
LQG15HS2N0S02
LQG15HS2N2S02
LQG15HS2N4S02
LQG15HS2N7S02
LQG15HS3N0S02
LQG15HS3N3S02
LQG15HS3N6S02
LQG15HS3N9S02
LQG15HS4N3S02
LQG15HS4N7S02
LQG15HS5N1S02
LQG15HS5N6S02
LQG15HS6N2S02
LQG15HS6N8J02
LQG15HS7N5J02
LQG15HS8N2J02
LQG15HS9N1J02
LQG15HS10NJ02
LQG15HS12NJ02
LQG15HS15NJ02
LQG15HS18NJ02
LQG15HS22NJ02
LQG15HS27NJ02
LQG15HS33NJ02
LQG15HS39NJ02
LQG15HS47NJ02
LQG15HS56NJ02
LQG15HS68NJ02
LQG15HS82NJ02
LQG15HSR10J02
LQG15HSR12J02
LQG15HSR15J02
LQG15HSR18J02
LQG15HSR22J02
LQG15HSR27J02
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
±5%
±5%
±5%
±5%
12nH
±5%
15nH
±5%
18nH
±5%
22nH
±5%
27nH
±5%
33nH
±5%
39nH
±5%
47nH
±5%
56nH
±5%
68nH
±5%
82nH
±5%
12
100nH
120nH
150nH
180nH
220nH
270nH
±5%
±5%
±5%
±5%
±5%
±5%
oEKLMQG18A (High-frequency Monolithic Type)
Inductance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
1.2nH
1.5nH
1.8nH
2.2nH
Tolerance
±0.3nH
±0.3nH
±0.3nH
±0.3nH
1
2
3
4
LQG18HN1N2S00
LQG18HN1N5S00
LQG18HN1N8S00
LQG18HN2N2S00
20
20
20
20
12
12
12
12
0.10
0.10
0.10
0.10
300
300
300
300
Continued on the following page.
72
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
2.7nH
3.3nH
3.9nH
4.7nH
5.6nH
6.8nH
8.2nH
10nH
12nH
15nH
18nH
22nH
27nH
33nH
39nH
47nH
56nH
68nH
82nH
100nH
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±5%
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
5
LQG18HN2N7S00
LQG18HN3N3S00
LQG18HN3N9S00
LQG18HN4N7S00
LQG18HN5N6S00
LQG18HN6N8J00
LQG18HN8N2J00
LQG18HN10NJ00
LQG18HN12NJ00
LQG18HN15NJ00
LQG18HN18NJ00
LQG18HN22NJ00
LQG18HN27NJ00
LQG18HN33NJ00
LQG18HN39NJ00
LQG18HN47NJ00
LQG18HN56NJ00
LQG18HN68NJ00
LQG18HN82NJ00
LQG18HNR10J00
0.15
0.15
0.15
0.20
0.20
0.25
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
0.90
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
oEKLMQP03D (High-frequency Film Type)
Inductance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
0.6nH
0.7nH
0.8nH
0.9nH
1.0nH
1.1nH
1.2nH
1.3nH
1.5nH
1.6nH
1.8nH
2.0nH
2.2nH
2.4nH
2.7nH
3.0nH
3.3nH
3.6nH
3.9nH
4.3nH
4.7nH
5.1nH
5.6nH
6.2nH
6.8nH
7.5nH
8.2nH
9.1nH
Tolerance
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±3%
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
0.08
0.09
0.09
0.09
0.10
0.13
0.13
0.16
0.16
0.16
0.16
0.18
0.18
0.21
0.21
0.30
0.30
0.45
0.45
0.55
0.55
0.68
0.68
0.75
0.75
0.86
0.86
1.10
420
410
410
410
400
280
280
280
280
280
280
220
220
220
220
190
190
170
170
160
160
140
140
130
130
110
110
100
1
LQP03TN0N6B00
LQP03TN0N7B00
LQP03TN0N8B00
LQP03TN0N9B00
LQP03TN1N0B00
LQP03TN1N1B00
LQP03TN1N2B00
LQP03TN1N3B00
LQP03TN1N5B00
LQP03TN1N6B00
LQP03TN1N8B00
LQP03TN2N0B00
LQP03TN2N2B00
LQP03TN2N4B00
LQP03TN2N7B00
LQP03TN3N0B00
LQP03TN3N3B00
LQP03TN3N6B00
LQP03TN3N9B00
LQP03TN4N3H00
LQP03TN4N7H00
LQP03TN5N1H00
LQP03TN5N6H00
LQP03TN6N2H00
LQP03TN6N8H00
LQP03TN7N5H00
LQP03TN8N2H00
LQP03TN9N1H00
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
12
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Continued on the following page.
73
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
10nH
12nH
15nH
18nH
22nH
27nH
29
30
31
32
33
34
LQP03TN10NH00
LQP03TN12NH00
LQP03TN15NH00
LQP03TN18NH00
LQP03TN22NH00
LQP03TN27NH00
20
20
20
20
20
20
±3%
±3%
±3%
±3%
±3%
±3%
11
11
11
11
11
11
1.10
1.25
1.50
2.00
2.60
3.10
100
90
90
80
70
70
oEKLMQP15A (High-frequency Film Type)
Inductance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
1.0nH
1.1nH
1.2nH
1.3nH
1.5nH
1.6nH
1.8nH
2.0nH
2.2nH
2.4nH
2.7nH
3.0nH
3.3nH
3.6nH
3.9nH
4.3nH
4.7nH
5.1nH
5.6nH
6.2nH
6.8nH
7.5nH
8.2nH
9.1nH
10nH
Tolerance
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±2%
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
0.1
0.1
0.1
0.2
0.2
0.3
0.2
0.3
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.9
0.9
1.1
1.1
1.3
1.3
1.6
1.8
2.0
2.6
3.1
3.8
1
LQP15MN1N0B02
LQP15MN1N1B02
LQP15MN1N2B02
LQP15MN1N3B02
LQP15MN1N5B02
LQP15MN1N6B02
LQP15MN1N8B02
LQP15MN2N0B02
LQP15MN2N2B02
LQP15MN2N4B02
LQP15MN2N7B02
LQP15MN3N0B02
LQP15MN3N3B02
LQP15MN3N6B02
LQP15MN3N9B02
LQP15MN4N3B02
LQP15MN4N7B02
LQP15MN5N1B02
LQP15MN5N6B02
LQP15MN6N2B02
LQP15MN6N8B02
LQP15MN7N5B02
LQP15MN8N2B02
LQP15MN9N1B02
LQP15MN10NG02
LQP15MN12NG02
LQP15MN15NG02
LQP15MN18NG02
LQP15MN22NG02
LQP15MN27NG02
LQP15MN33NG02
400
390
390
280
280
220
280
220
220
220
220
190
190
170
170
160
160
140
140
130
130
110
110
100
100
90
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
12nH
±2%
12
15nH
±2%
90
18nH
±2%
80
22nH
±2%
70
27nH
±2%
70
33nH
±2%
60
oEKLMQW15F (High-frequency Winding Type)
Inductance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
1.5nH
2.7nH
3.9nH
4.3nH
4.7nH
Tolerance
±0.1nH
±0.1nH
±0.1nH
±0.1nH
±0.1nH
1
2
3
4
5
LQW15AN1N5B00
LQW15AN2N7B00
LQW15AN3N9B00
LQW15AN4N3B00
LQW15AN4N7B00
20
20
20
20
20
10
20
25
25
25
0.03
0.05
0.07
0.07
0.07
1000
850
750
750
750
Continued on the following page.
74
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
0.12
0.09
0.09
0.13
0.14
0.14
0.14
0.17
0.14
0.14
0.21
0.16
0.24
0.27
0.27
0.30
0.52
0.52
0.58
0.63
0.63
0.70
1.08
1.17
1.96
2.24
2.52
2.66
0.017
0.027
0.027
0.040
0.040
0.040
0.051
0.051
0.051
Nominal
5.1nH
6.2nH
6.8nH
7.5nH
8.2nH
8.7nH
9.1nH
10nH
11nH
12nH
13nH
15nH
16nH
18nH
19nH
22nH
24nH
27nH
30nH
33nH
36nH
39nH
47nH
56nH
68nH
82nH
100nH
120nH
1.3nH
2.2nH
2.4nH
3.3nH
3.6nH
3.9nH
4.7nH
5.1nH
5.6nH
600
700
700
570
540
540
540
500
500
500
430
460
370
370
370
310
280
280
270
260
260
250
210
200
140
130
120
110
1200
1000
1000
900
900
900
800
800
800
±0.1nH
±0.1nH
±2%
25
25
25
25
25
25
25
25
30
30
25
30
25
25
25
25
25
25
25
25
25
25
25
25
20
20
20
20
20
25
25
30
30
30
30
30
30
6
LQW15AN5N1B00
LQW15AN6N2B00
LQW15AN6N8G00
LQW15AN7N5G00
LQW15AN8N2G00
LQW15AN8N7G00
LQW15AN9N1G00
LQW15AN10NG00
LQW15AN11NG00
LQW15AN12NG00
LQW15AN13NG00
LQW15AN15NG00
LQW15AN16NG00
LQW15AN18NG00
LQW15AN19NG00
LQW15AN22NG00
LQW15AN24NG00
LQW15AN27NG00
LQW15AN30NG00
LQW15AN33NG00
LQW15AN36NG00
LQW15AN39NG00
LQW15AN47NG00
LQW15AN56NG00
LQW15AN68NG00
LQW15AN82NG00
LQW15ANR10J00
LQW15ANR12J00
LQW15AN1N3C10
LQW15AN2N2C10
LQW15AN2N4D10
LQW15AN3N3D10
LQW15AN3N6C10
LQW15AN3N9D10
LQW15AN4N7D10
LQW15AN5N1C10
LQW15AN5N6C10
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
7
8
±2%
9
±2%
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±5%
±5%
±0.2nH
±0.2nH
±0.5nH
±0.5nH
±0.2nH
±0.5nH
±0.5nH
±0.2nH
±0.2nH
12
oEKLMQ18GA (High-frequency Winding Type)
Inductance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
3.6nH
3.9nH
4.3nH
5.6nH
6.2nH
6.8nH
10nH
Tolerance
±0.2nH
±0.2nH
±0.2nH
±0.2nH
±0.2nH
±0.2nH
±2%
20
20
20
20
20
20
20
20
20
20
20
25
35
35
35
35
35
35
35
35
35
40
0.059
0.059
0.059
0.082
0.082
0.082
0.11
850
850
850
750
750
750
650
650
600
600
600
1
2
LQW18AN3N6C00
LQW18AN3N9C00
LQW18AN4N3C00
LQW18AN5N6C00
LQW18AN6N2C00
LQW18AN6N8C00
LQW18AN10NG00
LQW18AN11NG00
LQW18AN12NG00
LQW18AN13NG00
LQW18AN15NG00
3
4
5
6
7
8
11nH
±2%
0.11
9
12nH
±2%
0.13
10
11
13nH
±2%
0.13
15nH
±2%
0.13
Continued on the following page.
75
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
16nH
18nH
20nH
22nH
24nH
27nH
30nH
33nH
36nH
39nH
43nH
47nH
51nH
56nH
62nH
68nH
72nH
75nH
82nH
91nH
100nH
110nH
120nH
130nH
150nH
160nH
180nH
200nH
220nH
270nH
330nH
390nH
470nH
3.9nH
6.8nH
10nH
12nH
18nH
22nH
27nH
40
40
40
40
40
40
40
40
40
40
40
38
38
38
38
38
34
34
34
34
34
32
32
32
32
32
25
25
25
30
30
30
30
38
38
38
38
42
42
42
0.16
0.16
0.16
0.17
0.21
0.21
0.23
0.23
0.26
0.26
0.29
0.29
0.33
0.35
0.51
0.38
0.56
0.56
0.60
0.64
0.68
1.2
550
550
550
500
500
440
420
420
400
400
380
380
370
360
280
340
270
270
250
230
220
200
180
170
160
150
140
120
120
110
85
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±0.2nH
±0.2nH
±2%
±2%
±2%
±2%
±2%
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
LQW18AN16NG00
LQW18AN18NG00
LQW18AN20NG00
LQW18AN22NG00
LQW18AN24NG00
LQW18AN27NG00
LQW18AN30NG00
LQW18AN33NG00
LQW18AN36NG00
LQW18AN39NG00
LQW18AN43NG00
LQW18AN47NG00
LQW18AN51NG00
LQW18AN56NG00
LQW18AN62NG00
LQW18AN68NG00
LQW18AN72NG00
LQW18AN75NG00
LQW18AN82NG00
LQW18AN91NG00
LQW18ANR10G00
LQW18ANR11G00
LQW18ANR12G00
LQW18ANR13G00
LQW18ANR15G00
LQW18ANR16G00
LQW18ANR18G00
LQW18ANR20G00
LQW18ANR22G00
LQW18ANR27G00
LQW18ANR33G00
LQW18ANR39G00
LQW18ANR47G00
LQW18AN3N9C10
LQW18AN6N8C10
LQW18AN10NG10
LQW18AN12NG10
LQW18AN18NG10
LQW18AN22NG10
LQW18AN27NG10
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
1.3
1.4
1.5
2.1
2.2
2.4
2.5
3.4
5.5
6.2
80
7.0
75
0.032
0.045
0.058
0.071
0.085
0.099
0.116
1000
900
800
750
700
640
590
12
oEKLMQ18JA (High-frequency Winding Type)
Inductance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
2.2nH
3.6nH
3.9nH
4.3nH
4.7nH
5.6nH
6.2nH
6.8nH
Tolerance
±0.5nH
±0.5nH
±0.5nH
±0.5nH
±0.5nH
±0.5nH
±0.5nH
±0.5nH
1
2
3
4
5
6
7
8
LQW18AN2N2D10
LQW18AN3N6D00
LQW18AN3N9D10
LQW18AN4N3D00
LQW18AN4N7D00
LQW18AN5N6D10
LQW18AN6N2D00
LQW18AN6N8D10
20
20
20
20
20
20
20
20
25
25
38
35
35
38
35
38
0.018
0.059
0.032
0.059
0.059
0.045
0.082
0.045
1400
850
1000
850
850
900
750
900
Continued on the following page.
76
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
0.082
0.058
0.11
0.11
0.11
0.058
0.11
0.071
0.13
0.085
0.16
0.085
0.16
0.099
0.21
0.116
0.23
0.132
0.26
0.26
0.29
0.29
0.33
0.35
0.51
0.38
0.56
0.56
0.60
0.64
0.68
1.2
Nominal
7.5nH
8.2nH
8.7nH
9.1nH
9.5nH
10nH
11nH
12nH
13nH
15nH
16nH
18nH
20nH
22nH
24nH
27nH
30nH
33nH
36nH
39nH
43nH
47nH
51nH
56nH
62nH
68nH
72nH
75nH
82nH
91nH
100nH
110nH
120nH
130nH
150nH
160nH
180nH
200nH
220nH
270nH
330nH
390nH
470nH
750
800
650
650
650
800
650
750
600
700
550
700
550
640
500
590
420
550
400
400
380
380
370
360
280
340
270
270
250
230
220
200
180
170
160
150
140
120
120
110
85
±0.5nH
±0.5nH
±0.5nH
±0.5nH
±0.5nH
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
35
38
35
35
35
38
35
38
35
42
40
42
40
42
40
42
40
42
40
40
40
38
38
38
38
38
34
34
34
34
34
32
32
32
32
32
25
25
25
30
30
30
30
9
LQW18AN7N5D00
LQW18AN8N2D10
LQW18AN8N7D00
LQW18AN9N1D00
LQW18AN9N5D00
LQW18AN10NJ10
LQW18AN11NJ00
LQW18AN12NJ10
LQW18AN13NJ00
LQW18AN15NJ10
LQW18AN16NJ00
LQW18AN18NJ10
LQW18AN20NJ00
LQW18AN22NJ10
LQW18AN24NJ00
LQW18AN27NJ10
LQW18AN30NJ00
LQW18AN33NJ10
LQW18AN36NJ00
LQW18AN39NJ00
LQW18AN43NJ00
LQW18AN47NJ00
LQW18AN51NJ00
LQW18AN56NJ00
LQW18AN62NJ00
LQW18AN68NJ00
LQW18AN72NJ00
LQW18AN75NJ00
LQW18AN82NJ00
LQW18AN91NJ00
LQW18ANR10J00
LQW18ANR11J00
LQW18ANR12J00
LQW18ANR13J00
LQW18ANR15J00
LQW18ANR16J00
LQW18ANR18J00
LQW18ANR20J00
LQW18ANR22J00
LQW18ANR27J00
LQW18ANR33J00
LQW18ANR39J00
LQW18ANR47J00
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
1.3
1.4
1.5
2.1
2.2
2.4
12
2.5
3.4
5.5
6.2
80
7.0
75
oEKLMQW2BB (High-frequency Winding Type)
Inductance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
2.7nH
3.1nH
3.3nH
5.6nH
6.8nH
Tolerance
±0.5nH
±0.5nH
±0.5nH
±0.5nH
±0.5nH
1
2
3
4
5
LQW2BHN2N7D13
LQW2BHN3N1D13
LQW2BHN3N3D13
LQW2BHN5N6D13
LQW2BHN6N8D13
20
20
20
20
20
20
20
20
35
35
0.02
0.02
0.02
0.02
0.02
1900
1800
1700
1500
1400
Continued on the following page.
77
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Tolerance
Quantity
(pcs.)
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
8.6nH
10nH
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
±0.5nH
±5%
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
30
35
35
15
15
15
15
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.15
0.09
0.23
0.26
0.23
0.42
0.38
0.40
0.47
0.71
0.70
2.00
2.20
2.50
2.80
1300
1320
1100
1000
1000
950
900
570
730
450
430
460
320
350
320
390
250
240
190
180
170
160
6
LQW2BHN8N6D13
LQW2BHN10NJ13
LQW2BHN12NK13
LQW2BHN15NK13
LQW2BHN18NK13
LQW2BHN21NK13
LQW2BHN27NK13
LQW2BHN33NJ03
LQW2BHN39NJ03
LQW2BHN47NJ03
LQW2BHN56NJ03
LQW2BHN68NJ03
LQW2BHN82NJ03
LQW2BHNR10J03
LQW2BHNR12J03
LQW2BHNR15J03
LQW2BHNR18J03
LQW2BHNR22J03
LQW2BHNR27K03
LQW2BHNR33K03
LQW2BHNR39K03
LQW2BHNR47K03
7
12nH
±10%
±10%
±10%
±10%
±10%
±5%
8
15nH
9
18.8nH
21nH
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
27nH
33nH
39nH
±5%
47nH
±5%
56nH
±5%
68nH
±5%
82nH
±5%
100nH
120nH
150nH
180nH
220nH
270nH
330nH
390nH
470nH
±5%
±5%
±5%
±5%
±5%
±10%
±10%
±10%
±10%
oEKLMQM18A (for General Use Monolithic Type)
Inductance
Quantity
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(pcs.)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
(Ω) max.
Nominal
47nH
Tolerance
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
2
LQM18NN47NM00
LQM18NN68NM00
LQM18NN82NM00
LQM18NNR10K00
LQM18NNR12K00
LQM18NNR15K00
LQM18NNR18K00
LQM18NNR22K00
LQM18NNR27K00
LQM18NNR33K00
LQM18NNR39K00
LQM18NNR47K00
LQM18NNR56K00
LQM18NNR68K00
LQM18NNR82K00
LQM18NN1R0K00
LQM18NN1R2K00
LQM18NN1R5K00
LQM18NN1R8K00
LQM18NN2R2K00
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
35
35
35
35
35
0.30
0.30
0.30
0.50
0.50
0.60
0.60
0.80
0.80
0.85
1.00
1.35
1.55
1.70
2.10
0.60
0.80
0.80
0.95
1.15
50
50
50
50
50
50
50
50
50
35
35
35
35
35
35
25
25
25
25
15
68nH
82nH
3
100nH
120nH
150nH
180nH
220nH
270nH
330nH
390nH
470nH
560nH
680nH
820nH
1000nH
1200nH
1500nH
1800nH
2200nH
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
12
Continued on the following page.
78
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
oEKLMM21NA (for General Use Monolithic Type)
Inductance
Tolerance
Quantity
Q
min.
DC Resistance
Rated Current
(mA)
No.
Part Number
(pcs.)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
(Ω) max.
0.26
0.29
0.32
0.35
0.38
0.42
0.48
0.53
0.57
0.63
0.72
0.81
0.40
0.47
0.50
0.57
0.63
0.69
0.80
0.89
1.00
Nominal
0.1µH
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
20
20
20
20
20
20
20
25
25
25
25
25
45
45
45
45
45
45
45
45
45
1
2
LQM21NNR10K10
LQM21NNR12K10
LQM21NNR15K10
LQM21NNR18K10
LQM21NNR22K10
LQM21NNR27K10
LQM21NNR33K10
LQM21NNR39K10
LQM21NNR47K10
LQM21NNR56K10
LQM21NNR68K10
LQM21NNR82K10
LQM21NN1R0K10
LQM21NN1R2K10
LQM21NN1R5K10
LQM21NN1R8K10
LQM21NN2R2K10
LQM21NN2R7K10
LQM21NN3R3K10
LQM21NN3R9K10
LQM21NN4R7K10
250
250
250
250
250
250
250
200
200
150
150
150
50
0.12µH
0.15µH
0.18µH
0.22µH
0.27µH
0.33µH
0.39µH
0.47µH
0.56µH
0.68µH
0.82µH
1.0µH
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1.2µH
50
1.5µH
50
1.8µH
50
2.2µH
30
2.7µH
30
3.3µH
30
3.9µH
30
4.7µH
30
oEKLMM21FA (for Choke Monolithic Type)
Inductance
Quantity
(pcs.)
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω)
Nominal
Tolerance
±30%
±30%
±30%
±30%
±30%
±30%
±20%
1
2
3
4
5
6
7
LQM21FN1R0N00
LQM21FN2R2N00
LQM21FN4R7N00
LQM21FN100N00
LQM21FN220N00
LQM21FN470N00
LQM31FN100M00
20
20
20
20
20
20
20
1.0µH
2.2µH
4.7µH
10µH
22µH
47µH
10µH
0.20±30%
0.28±30%
0.30±30%
0.50±30%
0.35±30%
0.60±30%
0.5 max.
220
150
80
60
13
7
70
12
oEKLMH32MB (for General Use Winding Type)
Inductance
Quantity
(pcs.)
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
1.0µH
1.2µH
1.5µH
1.8µH
2.2µH
2.7µH
3.3µH
3.9µH
4.7µH
5.6µH
6.8µH
8.2µH
Tolerance
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
2
LQH32MN1R0M23
LQH32MN1R2M23
LQH32MN1R5K23
LQH32MN1R8K23
LQH32MN2R2K23
LQH32MN2R7K23
LQH32MN3R3K23
LQH32MN3R9K23
LQH32MN4R7K23
LQH32MN5R6K23
LQH32MN6R8K23
LQH32MN8R2K23
20
20
20
20
20
20
20
20
20
20
20
20
0.50
0.60
0.60
0.70
0.80
0.90
1.00
1.10
1.20
1.30
1.50
1.60
445
425
400
390
370
320
300
290
270
250
240
225
3
4
5
6
7
8
9
10
11
12
Continued on the following page.
79
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Quantity
(pcs.)
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
10µH
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
LQH32MN100K23
LQH32MN120K23
LQH32MN150K23
LQH32MN180K23
LQH32MN220K23
LQH32MN270K23
LQH32MN330K23
LQH32MN390K23
LQH32MN470K23
LQH32MN560K23
LQH32MN680K23
LQH32MN820K23
LQH32MN101K23
LQH32MN121K23
LQH32MN151K23
LQH32MN181K23
LQH32MN221K23
LQH32MN271K23
LQH32MN331K23
LQH32MN391K23
LQH32MN471K23
LQH32MN561K23
1.8
2.0
190
180
170
165
150
125
115
110
100
85
12µH
15µH
2.2
18µH
2.5
22µH
2.8
27µH
3.1
33µH
3.5
39µH
3.9
47µH
4.3
56µH
4.9
68µH
5.5
80
82µH
6.2
70
100µH
120µH
150µH
180µH
220µH
270µH
330µH
390µH
470µH
560µH
7.0
80
8.0
75
9.3
70
10.2
11.8
12.5
13.0
22.0
25.0
28.0
65
65
65
65
50
45
40
oEKLMH43MB (for General Use Winding Type)
Inductance
Quantity
(pcs.)
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
1.0µH
1.2µH
1.5µH
1.8µH
2.2µH
2.7µH
3.3µH
3.9µH
4.7µH
5.6µH
6.8µH
8.2µH
10µH
12µH
15µH
18µH
22µH
27µH
33µH
39µH
47µH
56µH
68µH
82µH
100µH
120µH
Tolerance
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1
LQH43MN1R0M03
LQH43MN1R2M03
LQH43MN1R5M03
LQH43MN1R8M03
LQH43MN2R2M03
LQH43MN2R7M03
LQH43MN3R3M03
LQH43MN3R9M03
LQH43MN4R7K03
LQH43MN5R6K03
LQH43MN6R8K03
LQH43MN8R2K03
LQH43MN100K03
LQH43MN120K03
LQH43MN150K03
LQH43MN180K03
LQH43MN220K03
LQH43MN270K03
LQH43MN330K03
LQH43MN390K03
LQH43MN470K03
LQH43MN560K03
LQH43MN680K03
LQH43MN820K03
LQH43MN101K03
LQH43MN121K03
0.20
0.20
0.30
0.30
0.30
0.32
0.35
0.38
0.40
0.47
0.50
0.56
0.56
0.62
0.73
0.82
0.94
1.10
1.20
1.40
1.50
1.7
500
500
500
500
500
500
500
500
500
500
450
450
400
380
360
340
320
300
270
240
220
200
180
170
160
150
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
12
1.9
2.2
2.5
3.0
Continued on the following page.
80
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
Inductance
Quantity
(pcs.)
DC Resistance
Rated Current
(mA)
No.
Part Number
(Ω) max.
Nominal
150µH
180µH
220µH
270µH
330µH
390µH
470µH
560µH
680µH
820µH
1000µH
1200µH
1500µH
1800µH
2200µH
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
3.7
4.5
130
120
110
100
95
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
LQH43MN151K03
LQH43MN181K03
LQH43MN221K03
LQH43MN271K03
LQH43MN331K03
LQH43MN391K03
LQH43MN471K03
LQH43MN561K03
LQH43MN681K03
LQH43MN821K03
LQH43MN102K03
LQH43MN122K03
LQH43MN152K03
LQH43NN182K03
LQH43NN222K03
5.4
6.8
8.2
9.7
90
11.8
14.5
17.0
20.5
25.0
30.0
37.0
45.0
50.0
80
70
65
60
50
45
40
35
30
oEKLMH32CB (for Choke Winding Type)
Inductance
Quantity
DC Resistance
Rated Current
(mA)
No.
Part Number
(pcs.)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
(Ω)
Nominal
0.15µH
0.27µH
0.47µH
1.0µH
2.2µH
4.7µH
10µH
Tolerance
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
LQH32CNR15M33
LQH32CNR27M33
LQH32CNR47M33
LQH32CN1R0M33
LQH32CN2R2M33
LQH32CN4R7M33
LQH32CN100K33
LQH32CN1R0M23
LQH32CN2R2M23
LQH32CN4R7M23
LQH32CN100K23
LQH32CN220K23
LQH32CN470K23
LQH32CN101K23
LQH32CN221K23
LQH32CN331K23
LQH32CN391K23
LQH32CN471K23
LQH32CN561K23
LQH32CN1R0M53
LQH32CN2R2M53
LQH32CN4R7M53
LQH32CN100K53
LQH32CN150K53
LQH32CN220K53
LQH32CN330K53
LQH32CN470K53
LQH32CN680K53
LQH32CN101K53
0.028±30%
0.034±30%
0.042±30%
0.06±30%
0.097±30%
0.15±30%
0.3±30%
0.09±30%
0.13±30%
0.2±30%
0.44±30%
0.71±30%
1.3±30%
3.5±30%
8.4±30%
10±30%
1450
1250
1100
1000
790
650
450
800
600
450
300
250
170
100
70
2
3
4
5
6
7
1.0µH
2.2µH
4.7µH
10µH
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
22µH
47µH
100µH
220µH
330µH
390µH
470µH
560µH
1.0µH
2.2µH
4.7µH
10µH
60
17±30%
60
12
19±30%
60
22±30%
60
0.06±30%
0.097±30%
0.15±30%
0.3±30%
0.58±30%
0.71±30%
1.1±30%
1.3±30%
2.2±30%
3.5±30%
1000
790
650
450
300
250
200
170
130
100
15µH
22µH
33µH
47µH
68µH
100µH
Continued on the following page.
81
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Design Kits
Continued from the preceding page.
oEKLMH43CB (for Choke Winding Type)
Inductance
Quantity
DC Resistance
Rated Current
(mA)
No.
Part Number
(pcs.)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
(Ω)
Nominal
1.0µH
1.5µH
2.2µH
3.3µH
4.7µH
6.8µH
10µH
Tolerance
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±30%
±30%
±30%
±30%
±30%
1
2
LQH43CN1R0M03
LQH43CN1R5M03
LQH43CN2R2M03
LQH43CN3R3M03
LQH43CN4R7M03
LQH43CN6R8M03
LQH43CN100K03
LQH43CN150K03
LQH43CN220K03
LQH43CN330K03
LQH43CN470K03
LQH43CN680K03
LQH43CN101K03
LQH43CN151K03
LQH43CN221K03
LQH43CN331K03
LQH43CN471K03
LQH3KSN561N23
LQH3KSN681N23
LQH3KSN102N23
LQH3KSN152N23
LQH3KSN222N23
0.08 max
0.09 max
0.11 max
0.13 max
0.15 max
0.20 max
0.24 max
0.32 max
0.60 max
1.00 max
1.10 max
1.70 max
2.20 max
3.50 max
4.00 max
6.80 max
8.50 max
7.8±30%
9.1±30%
11±30%
1080
1000
900
800
750
720
650
570
420
310
280
220
190
130
110
100
90
3
4
5
6
7
15µH
8
22µH
9
33µH
10
11
12
13
14
15
16
17
18
19
20
21
22
47µH
68µH
100µH
150µH
220µH
330µH
470µH
560µH
680µH
1000µH
1500µH
2200µH
50
40
30
23±30%
25
28±30%
20
12
82
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Information
1. Land Area and Q-F Characteristics
PCB: Ag-Pb printed land formed on 0.6mm-thick alumina plate
Solder: H60A
Soldering: Reflow soldering
Solder layer: Sections shown by oblique lines in figure
LQH32MN680K23
100
A : Characteristic of coil itself
80
60
40
B :
C :
Characteristic of chip mounted on land
A
1
1
1.3
5.5
Characteristic of chip mounted on land
B
Q
2.5 2.5
1
(in mm)
C
20
0
10k
50k
100k
500k
Frequency (Hz)
1M
5M
2. Coupling coefficient versus Coil-to-coil Spacing
LQH32M Series
14
Coil-to-coil Spacing
12
10
8
6
4
330µH
1µH
2
0
0
1
2
3
4
5
6
Coil-to-coil Spacing (mm)
83
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Mu ra t a Ch ip S -P a ra m e t e r & Im p e d a n c e Lib ra ry
Mu ra t a Ch ip S -P a ra m e t e r & Im p e d a n c e Lib ra ry
Download Service
The program enables you to calculate, view and print graphs of impedance and S parameter of
chip capacitors or chip inductors.
S parameter data in Touchstone format can also be copied.
Main Window
• Easy operation due to using Windows interface.
• Fast calculation of data and graph for S parameter and impedance of chip
capacitors or chip inductors.
• S parameter is saved in your personal computer and utilized for circuit simulation.
This software uses the Global Part Numbers that have been adopted since June 2001.
The Previous Part Numbers can be used by selecting "view" menu. Please check carefully
when referring to the contents.
This simulator can be downloaded from Murata web site.
http://www.murata.com/designlib/mcsil.html
84
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
O05E13.pdf 05.3.4
Note:
1. Export Control
For customers outside Japan
<
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use
in applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
t Medical equipment
u Traffic signal equipment
o Data-processing equipment
r Power plant equipment
y Transportation equipment (vehicles, trains, ships, etc.)
i Disaster prevention / crime prevention equipment
! Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of January 2005. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
He a d O ffice
In te rn a tio n a l Divisio n
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
相关型号:
LQH31HNR88K03B
General Purpose Inductor, 0.88uH, 10%, 1 Element, Ferrite-Core, SMD, CHIP, 1206
MURATA
©2020 ICPDF网 联系我们和版权申明