LQH32PN100MN0K [MURATA]
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type);
| 型号： | LQH32PN100MN0K |
| 厂家： | 
muRata |
| 描述： | Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type) |
| 文件： | 总2页 (文件大小：91K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH32P_N0 Series (1210 Size)
I Dimensions
I Packaging
Code
Packaging
Minimum Quantity
2.7 0.2
2.5 0.2
L
180mm Embossed Tape
330mm Embossed Tape
2000
7500
K
A
A
2.5 0.2
3.2 0.3
A: 2.8 max.
0.9 0.3
0.9 0.3
1.3 0.2
(in mm)
I Rated Value (p: packaging code)
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
Self Resonance
Frequency (min.)
Part Number
Inductance
DC Resistance
LQH32PNR47NN0p
LQH32PN1R0NN0p
LQH32PN1R5NN0p
LQH32PN2R2NN0p
LQH32PN3R3NN0p
LQH32PN4R7NN0p
LQH32PN6R8NN0p
LQH32PN100MN0p
LQH32PN150MN0p
LQH32PN220MN0p
LQH32PN330MN0p
LQH32PN470MN0p
LQH32PN680MN0p
LQH32PN101MN0p
LQH32PN121MN0p
Test Frequency: 1MHz
0.47µH 30%
1.0µH 30%
1.5µH 30%
2.2µH 30%
3.3µH 30%
4.7µH 30%
6.8µH 30%
10µH 20%
15µH 20%
22µH 20%
33µH 20%
47µH 20%
68µH 20%
100µH 20%
120µH 20%
3400mA
2300mA
1750mA
1550mA
1250mA
1000mA
850mA
750mA
600mA
500mA
380mA
330mA
280mA
180mA
170mA
2550mA
2050mA
1750mA
1600mA
1200mA
1000mA
850mA
700mA
520mA
450mA
390mA
310mA
275mA
250mA
200mA
0.03ohm 20%
100MHz
0.045ohm 20%
0.057ohm 20%
0.076ohm 20%
0.12ohm 20%
0.18ohm 20%
0.24ohm 20%
0.38ohm 20%
0.57ohm 20%
0.81ohm 20%
1.15ohm 20%
1.78ohm 20%
2.28ohm 20%
2.70ohm 20%
4.38ohm 20%
100MHz
70MHz
70MHz
50MHz
40MHz
40MHz
30MHz
20MHz
20MHz
13MHz
11MHz
11MHz
8MHz
8MHz
Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40 to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, Inductance will be within 30% of nominal Inductance value.
*2 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.5.12
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
2
Continued from the preceding page.
I Notice (Rated Current)
<Rated Current>
(Based on Inductance Change)
When Rated Current is applied to the Products,
Inductance will be within +-30% of nominal
Inductance value.
<Rated Current>
(Based on Temperature Rise)
When Rated Current is applied to the Products,
self-generation of heat will rise to 40°C or less.
I Inductance-Frequency Characteristics (Typ.)
I Inductance-Current Characteristics (Typ.)
1000
1000
120µH
100µH
100
100
100µH
68µH
47µH
33µH
22µH
47µH
22µH
15µH
10µH
6.8µH
4.7µH
3.3µH
2.2µH
10
1
10
10µH
4.7µH
1.5µH
2.2µH
1.0µH
1
1.0µH
0.47µH
0.1
0.1
0.1
1
10
100
1
10
100
1000
10000
Frequency (MHz)
Current (mA)
I Temperature Rise Characteristics (Typ.)
50
100µH
47µH
22µH
4.7µH
1.0µH
10µH
2.2µH
40
30
20
10
0
0
500
1000
1500
2000
2500
Current (mA)
I !Caution/Notice
!Caution (Rating)
Notice
Do not use products beyond the rated current as
this may create excessive heat.
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.5.12
http://www.murata.com/
相关型号：
©2020 ICPDF网 联系我们和版权申明