LQH32PN2R2NN0K [MURATA]
General Purpose Inductor, 2.2uH, 30%, 1 Element, SMD, 1210, CHIP, 1210;型号: | LQH32PN2R2NN0K |
厂家: | muRata |
描述: | General Purpose Inductor, 2.2uH, 30%, 1 Element, SMD, 1210, CHIP, 1210 测试 射频感应器 电感器 |
文件: | 总2页 (文件大小:79K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Inductors (Coils) for Power Lines
1
Data Sheet
LQH32PN_N0 Series 1210/3225 (inch/mm)
Thickness
Wound
(Shield)
RoHS
General
1.7mm
Reflow
OK
max.
Dimensions
Packaging
c
c
Code
Packaging
Minimum Quantity
2.7±±.2
2.5±±.2
L
ø180mm Embossed Taping
ø330mm Embossed Taping
2000
7500
K
A
A
2.5±±.2
3.2±±.3
A: 2.8 max.
±.9±±.3
±.9±±.3
1.3±±.2
(in mm)
Rated Value ( : packaging code)
p
c
Inductance
Rated Current
Rated Current
Self-Resonance
Frequency (min.)
Part Number
Inductance
DC Resistance
Test Frequency (Based on Inductance Change) (Based on Temperature Rise)
LQH32PNR47NN0
LQH32PN1R0NN0
LQH32PN1R5NN0
LQH32PN2R2NN0
LQH32PN3R3NN0
LQH32PN4R7NN0
LQH32PN6R8NN0
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
0.47µH ±30%
1.0µH ±30%
1.5µH ±30%
2.2µH ±30%
3.3µH ±30%
4.7µH ±30%
6.8µH ±30%
10µH ±20%
15µH ±20%
22µH ±20%
33µH ±20%
47µH ±20%
68µH ±20%
100µH ±20%
120µH ±20%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
3400mA
2300mA
1750mA
1550mA
1250mA
1000mA
850mA
750mA
600mA
500mA
380mA
330mA
280mA
180mA
170mA
2550mA
2050mA
1750mA
1600mA
1200mA
1000mA
850mA
700mA
520mA
450mA
390mA
310mA
275mA
250mA
200mA
0.03Ω±20%
0.045Ω±20%
0.057Ω±20%
0.076Ω±20%
0.12Ω±20%
0.18Ω±20%
0.24Ω±20%
0.38Ω±20%
0.57Ω±20%
0.81Ω±20%
1.15Ω±20%
1.78Ω±20%
2.28Ω±20%
2.70Ω±20%
4.38Ω±20%
100MHz
100MHz
70MHz
70MHz
50MHz
40MHz
40MHz
30MHz
20MHz
20MHz
13MHz
11MHz
11MHz
8MHz
LQH32PN100MN0
LQH32PN150MN0
LQH32PN220MN0
LQH32PN330MN0
LQH32PN470MN0
LQH32PN680MN0
LQH32PN101MN0
LQH32PN121MN0
8MHz
Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40~125℃
Operating Temperature Range (Self-temperature rise is not included): -40~85℃
For reflow soldering only.
Notice (Rating)
c
When applied rated current to the products, inductance will be
within 30% of initial inductance value.
When applied rated current to the products, self-temperature rise
shall be limited to 40°C max.
Keep the temperature (ambient temperature plus self-generation
of heat) under 125°C.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.1.14
http://www.murata.com/
Inductors (Coils) for Power Lines
2
Data Sheet
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
c
c
1000
1000
100
10
120μH
100μH
68μH
47μH
120μH
100μH
68μH
47μH
33μH
22μH
15μH
10μH
33μH
100
22μH
15μH
10μH
6.8μH
4.7μH
3.3μH
2.2μH
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH
1.0μH
0.47μH
10
1.5μH
1.0μH
1
1
0.47μH
0.1
0.1
0.001
0.01
0.1
1
10
100
1000
1
10
100
1000
10000
Frequency (MHz)
Current (mA)
Temperature Rise Characteristics (Typ.)
c
100
90
0.47μH
80
70
60
50
40
30
20
10
0
15μH
10μH
3.3μH
4.7μH
2.2μH
1.5μH
33μH
22μH
1.0μH
6.8μH
47μH
68μH
100μH
120μH
0
500
1000
1500
2000
2500
3000
3500
4000
Current (mA)
Caution/Notice
c !
Caution (Rating)
Notice
!
Do not use products beyond the rated current as
this may create excessive heat.
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.1.14
http://www.murata.com/
相关型号:
©2020 ICPDF网 联系我们和版权申明