LQM2MPNR47MGH [MURATA]
LQM2MPN_GH Series 2016/0806 (mm/inch) Inductors (Coils) for Power Lines; LQM2MPN_GH系列2016/0806 （毫米/英寸），电感器（线圈）的电源线
| 型号： | LQM2MPNR47MGH |
| 厂家： | 
muRata |
| 描述： | LQM2MPN_GH Series 2016/0806 (mm/inch) Inductors (Coils) for Power Lines |
| 文件： | 总2页 (文件大小：95K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Inductors (Coils) for Power Lines
1
Data Sheet
LQM2MPN_GH Series 2016/0806 (mm/inch)
Multi-
layer
Thickness
LowRdc
Bias
RoHS
General
1.0mm
Reflow
OK
max.
Dimensions
Packaging
c
c
Code
Packaging
Minimum Quantity
0.5 0.2
L
ø180mm Embossed taping
3000
1.6 0.2
2.0 0.ꢀ
(in mm)
Rated Value ( : packaging code)
p
c
Inductance
Rated current
Rated current
Self resonance
frequency (min.)
Part Number
Inductance
DC resistance
test frequency (Based on Inductance change) (Based on Temperature rise)
LQM2MPNR16MGH
LQM2MPNR24MGH
LQM2MPNR33MGH
LQM2MPNR47MGH
LQM2MPNR68MGH
LQM2MPN1R0MGH
LQM2MPN1R5MGH
LQM2MPN2R2MGH
p
p
p
p
p
p
p
p
0.16µH ±20%
0.24µH ±20%
0.33µH ±20%
0.47µH ±20%
0.68µH ±20%
1.0µH ±20%
1.5µH ±20%
2.2µH ±20%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
4.8A
4.0A
3.2A
3.2A
2.1A
1.6A
1.5A
1.0A
4.0A
3.4A
3.1A
2.5A
1.9A
1.9A
1.5A
1.0A
0.014Ω±25%
0.020Ω±25%
0.024Ω±25%
0.037Ω±25%
0.060Ω±25%
0.064Ω±25%
0.104Ω±25%
0.210Ω±25%
150MHz
130MHz
90MHz
80MHz
60MHz
60MHz
50MHz
40MHz
Class of magnetic shield: Magnetic shield of ferrite
Operating temperature range: -40～85℃
Only for reflow soldering.
Notice (Rating)
c
When applied Rated current to the Products,
Inductance will be within 30% of initial Inductance
value.
When applied Rated current to the Products, self
temperature rise shall be limited to 40°C max.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
Inductors (Coils) for Power Lines
2
Data Sheet
Continued from the preceding page.
Inductance-Frequency characteristics (Typ.)
Inductance-Current characteristics (Typ.)
c
c
10
10
2.2μH
1.5μH
2.2μH
1.5μH
1.0μH
1.0μH
0.68μH
0.47μH
1
1
0.68μH
0.47μH
0.33μH
0.24μH
0.16μH
0.33μH
0.24μH
0.16μH
0.1
0.1
0.1
1
10
100
1000
1
10
100
1000
10000
Frequency (MHz)
Current (mA)
Temperature rise characteristics (Typ.)
c
50
45
40
0.24μH
35
1.0μH
0.16μH
1.5μH
0.33μH
0.47μH
30
25
20
15
10
5
0.68μH
2.2μH
0
0
500
1000
1500
2000
2500
3000
3500
4000
4500
Current (mA)
Caution/Notice
c !
Caution (Rating)
Notice
!
Do not use products beyond the rated current as
this may create excessive heat.
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
相关型号：
LQM2MPNR47NG0L
General Purpose Inductor, 0.47uH, 30%, 1 Element, Ferrite-Core, SMD, 0806, CHIP, 0806
MURATA
©2020 ICPDF网 联系我们和版权申明