LQW21HNR82J00L [MURATA]
Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound Ferrite Type;
| 型号： | LQW21HNR82J00L |
| 厂家： | 
muRata |
| 描述： | Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound Ferrite Type 测试 射频感应器 电感器 |
| 文件： | 总2页 (文件大小：51K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound Ferrite Type
Data Sheet
1
Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound Ferrite Type
LQW21H_00 Series (0805 Size)
I Dimensions
I Packaging
Code
Packaging
180mm Embossed Tape
Bulk(Bag)
Minimum Quantity
2.0 0.2
L
3000
500
B
1.2 0.2
0.45 0.1
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance Test Frequency Rated Current
Max. of DC resistance Q (min.) Test Frequency
Self Resonance Frequency (min.)
LQW21HNR47J00p
LQW21HNR56J00p
LQW21HNR68J00p
LQW21HNR82J00p
LQW21HN1R0J00p
LQW21HN1R2J00p
LQW21HN1R5J00p
LQW21HN1R8J00p
LQW21HN2R2J00p
0.47µH 5%
0.56µH 5%
0.68µH 5%
0.82µH 5%
1.0µH 5%
1.2µH 5%
1.5µH 5%
1.8µH 5%
2.2µH 5%
10MHz
10MHz
10MHz
10MHz
10MHz
10MHz
10MHz
10MHz
10MHz
160mA
150mA
130mA
125mA
115mA
100mA
85mA
1.30ohm
1.43ohm
2.21ohm
2.34ohm
2.86ohm
3.12ohm
5.33ohm
5.85ohm
6.50ohm
35
35
35
35
35
35
35
35
35
100MHz
100MHz
100MHz
100MHz
100MHz
100MHz
100MHz
100MHz
100MHz
620MHz
580MHz
520MHz
480MHz
450MHz
400MHz
350MHz
320MHz
300MHz
80mA
75mA
Operating Temperature Range: -40°C to +85°C
Only for reflow soldering.
I Q-Frequency Characteristics (Typ.)
I Inductance-Frequency Characteristics (Typ.)
80
10
2.2µH
2.2µH
60
1.5µH
1.0µH
1.0µH
0.68µH
1.5µH
0.68µH
40
1
0.47µH
0.47µH
20
0
0.1
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound Ferrite Type
Data Sheet
2
Continued from the preceding page.
I !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/
相关型号：
©2020 ICPDF网 联系我们和版权申明