NCP18XV103E03RB [MURATA]
NTC Thermistor, 10000ohm, Surface Mount, CHIP, 0603;型号: | NCP18XV103E03RB |
厂家: | muRata |
描述: | NTC Thermistor, 10000ohm, Surface Mount, CHIP, 0603 温度补偿 电阻器 |
文件: | 总47页 (文件大小:1032K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
R44E.pdf
Oct.6,2016
NTC Thermistors
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
Fꢀ
ꢁ**ꢀ2&#ꢀ.0-"3!21ꢀ',ꢀ2&'1ꢀ!ꢂ2ꢂ*-%ꢀ!-+.*7ꢀ
5'2&ꢀꢃꢄꢀꢅ-ꢆꢇ@
Fꢀ
ꢃꢄꢀꢅ-ꢆꢇꢀ'1ꢀ2&#ꢀꢃ30-.#ꢂ,ꢀꢈ'0#!2'4#ꢀ
|z{{GGꢃꢄꢀ-,ꢀ2&#ꢀꢅ#120'!2'-,ꢀ-$ꢀ2&#ꢀ
ꢄ1#ꢀ-$ꢀꢉ#02ꢂ',ꢀꢆꢂ8ꢂ0"-31ꢀꢇ3 12ꢂ,!#1ꢀ',ꢀ
ꢃ*#!20'!ꢂ*ꢀꢂ,"ꢀꢃ*#!20-,'!ꢀꢃ/3'.+#,2@ꢀ
Fꢀ
Forꢀ+-0#ꢀ"#2ꢂ'*1Aꢀ.*#ꢂ1#ꢀ0#$#rꢀ2oꢀ-urꢀ
5# 1'2#ꢀ'Murꢂ2ꢂ1ꢀA..roꢂc&ꢀ$o0ꢀꢃꢄꢀꢅ-ꢆꢇ'
ꢀH&22.BGG555@+30ꢂ2ꢂ@!-+G#,-
#3G13..-02G!-+.*'ꢂ,!#G0-&1J@ꢀ
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Part Numbering
p2
p6
Basic Characteristics
Contents
Product specifications are as of August 2016.
1 Temperature Sensor and Compensation
0201 (0603) Size
p7
2 Temperature Sensor and Compensation
0402 (1005) Size/NCP Series
2
3
4
5
6
7
8
p8
p9
Temperature Sensor and Compensation
0402 (1005) Size/NCU Series
3 Temperature Sensor and Compensation
0603 (1608) Size/NCP Series
p10
p11
Temperature Sensor and Compensation
0603 (1608) Size/NCU Series
4 Temperature Sensor and Compensation
0805 (2012) Size
p12
Temperature Sensor and Compensation Chip Type
Standard Land Pattern Dimensions
p13
p14
p17
p21
p24
p25
p27
p28
p29
p30
Temperature Sensor and Compensation Chip Type
Temperature Characteristics (Center Value)
Temperature Sensor and Compensation Chip Type
!Caution/Notice
Temperature Sensor and Compensation Chip Type
Package
5
Temperature Sensor Thermo String Type
Temperature Sensor Thermo String Type
Specifications and Test Methods
6 Temperature Sensor Lead Type
Temperature Sensor Lead Type
Specifications and Test Methods
7
Temperature Sensor Lead Insulation Type
Temperature Sensor Lead Insulation Type
Specifications and Test Methods
Temperature Sensor Thermo String/Lead Type
Temperature Characteristics (Center Value)
p31
p32
p34
p35
p37
p41
p43
Temperature Sensor Thermo String/Lead Type
!Caution/Notice
Temperature Sensor Thermo String/Lead Type
Package
8 Inrush Current Suppression Lead Type
Current-R Ratio (RT/R25)/
Current-Temperature Characteristics (Typical)
Inrush Current Suppression Lead Type
!Caution/Notice
Inrush Current Suppression Lead Type
Package
Please check the MURATA website (http://www.murata.com/)
if you cannot find a part number in this catalog.
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
NTC Thermistors for Temp. Sensor and Compensation Chip Type
NC
1
P
2
18 XH 103
J
6
03 RB
(Part Number)
3
4
5
7
8
1Product ID
5Resistance
Expressed by three-digit alphanumerics0 The unit is ohm (Ω)0
The first and second figures are significant digits, and the third
figure expresses the number of zeros that follow the two figures0
Product ID
NC
NTC Thermistors Chip Type
2Series
Ex0
Code
102
103
104
Resistance
ꢀkΩ
Code
P
Series
ꢀ±kΩ
Plated Termination Series
High Reliability Series
U
ꢀ±±kΩ
3Dimensions (L x W)
6Resistance Tolerance
Code
03
Dimensions (L x W)
±06± x ±0ꢁ±mm
ꢀ0±± x ±0.±mm
ꢀ06± x ±08±mm
20±± x ꢀ02.mm
EIA
Code
Resistance Tolerance
D
F
E
J
±±0.5
±ꢀ5
±2±ꢀ
±4±2
±6±ꢁ
±8±.
15
18
±ꢁ5
21
±.5
4Temperature Characteristics
7Individual Specifications
Structures and other specifications are expressed by two figures0
Code
XC
Temperature Characteristics
Ex0
Individual Specifications
Standard Type
Code
03/05/10/12/60
pS
Nominal B-Constant ꢁꢀ±±–ꢁꢀ49K
Nominal B-Constant ꢁ2.±–ꢁ299K
Nominal B-Constant ꢁꢁ.±–ꢁꢁ99K
Nominal B-Constant ꢁ.±±–ꢁ.49K
Nominal B-Constant ꢁ6.±–ꢁ699K
Nominal B-Constant ꢁ9±±–ꢁ949K
Nominal B-Constant ꢁ9.±–ꢁ999K
Nominal B-Constant 4±.±–4±99K
Nominal B-Constant 4ꢀ.±–4ꢀ99K
Nominal B-Constant 42.±–4299K
Nominal B-Constant 44.±–4499K
Nominal B-Constant 4.±±–4.49K
XF
XH
Automotive Type
XM
XQ
8Packaging
XV
Code
RA
Packaging
XW
WB
WD
WF
WL
WM
Plastic Taping 4mm Pitch (4±±± pcs0)
Paper Taping 4mm Pitch (4±±± pcs0)
Paper Taping 2mm Pitch (ꢀ±±±± pcs0)
Paper Taping 2mm Pitch (ꢀ.±±± pcs0)
RB
RC
RL
2
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistor for Temperature Sensor Thermo String Type
NXF
1
T
2
15 XH 103
F
6
A
7
2
8
B
9
025
:
(Part Number)
3
4
5
1Product ID
7Lead Wire Type
Product ID
Code
Lead Wire Type
NXF
NTC Thermistors Sensor Thermo String Type
ø0.3mm Copper Lead Wire
with Polyurethane Coat
A
2Individual Specifications
8Shape of the Lead Wire Kink
Code
Individual Specifications
T
Commercial Type
Shape of the Lead Wire Kink
Code
Twisted Lead Wire Type
Standard Type
1
2
3Chip Dimensions
Code
Dimensions (L x T)
1.00 x 0.50mm
EIA
9Packaging
15
0402
Code
Packaging
4Temperature Characteristics
B
Bulk
Code
XH
Temperature Characteristics
:Dimensions (Full Length)
Nominal B-Constant 3350–3399K
Nominal B-Constant 3900–3949K
Nominal B-Constant 4050–4099K
Nominal B-Constant 4250–4299K
XV
Code
025
030
040
050
060
070
080
090
100
110
120
130
140
150
Dimensions (Full Length)
25mm
WB
WF
30mm
40mm
5Resistance
50mm
Expressed by three figures. The unit is (Ω). The first and second
figures are significant digits, and the third figure expresses the
number of zeros that follow the two figures.
60mm
70mm
80mm
Ex.
Code
103
473
104
Resistance
10kΩ
90mm
100mm
110mm
120mm
130mm
140mm
150mm
47kΩ
100kΩ
6Resistance Tolerance
Code
Resistance Tolerance
F
1ꢀ
3
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistor for Temperature Sensor/Lead Type
NXR
1
T
2
15 XH 103
F
6
A
7
1
8
B
9
040
:
(Part Number)
3
4
5
1Product ID
7Lead Wire Type
Product ID
Code
Lead Wire Type
NXR
NTC Thermistor Sensor/Lead Type
Lead Type: ø0.4mm Copper-clad Fe Wire, Tinned
Lead Insulation Type: ø0.46mm Cu Wire with Coat
A
2Individual Specifications
8Shape of the Lead Wire
Code
Individual Specifications
T
Commercial Type
Shape of the Lead Wire
Lead Spacing 2.5mm
Lead Spacing 5.0mm
Code
1
3
3Chip Dimensions
Code
Dimensions (L x T)
Lead Spacing 2.5mm (Insulation Type)
5
15
1.00 x 0.50mm
9Packaging
4Temperature Characteristics
Code
A
Packaging
Ammo Pack Taping
Bulk
Code
XH
Temperature Characteristics
Nominal B-Constant ±±50–±±99K
Nominal B-Constant ±500–±549K
Nominal B-Constant ±900–±949K
Nominal B-Constant 4050–4099K
Nominal B-Constant 4250–4299K
B
XM
XV
:Dimensions (Full Length)
WB
WF
Code
010
020
025
030
035
040
016
Lead Type
Lead Insulation Type
10mm
–
–
20mm
5Resistance
–
25mm
±0mm
±5mm
–
Expressed by three figures. The unit is (Ω). The first and second
figures are significant digits, and the third figure expresses the
number of zeros that follow the two figures.
±0mm
–
40mm
Ex.
Code
202
103
104
Resistance
2.0kΩ
16mm (Taping Type)
–
10kΩ
100kΩ
6Resistance Tolerance
Code
Resistance Tolerance
F
E
J
±1ꢀ
±±ꢀ
±5ꢀ
4
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors for Inrush Current Suppression Lead Type
NT PA7 160
L
4
BM B0
(Part Number)
1
2
3
5
6
1Product ID
4Resistance Tolerance
Product ID
Code
Resistance Tolerance
NT
NTC Thermistors
L
±±15
2Series
5Individual Specifications
The lead structure and other specifications are expressed
by two-digit alphanumerics.
Code
PA5
PA6
PA7
PA9
PAA
PAD
PAJ
PAN
Series
Nominal Body Diameter
ø1mm
ø6mm
Individual Specifications
Standard Type (Ammo Pack) ø7mm, ø9mm
Standard Type (Bulk) ø7mm, ø9mm
Standard Type (Ammo Pack) ø±0mm, ø±3mm
Body Diameter
Code
B1
ø7mm
Inrush Current
Suppression
Lead Type
ø9mm
BM
D6
ø±0mm
ø±3mm
Standard (Bulk)
Standard (Bulk)
ø±8mm, ø22mm
ø±0mm, ø±3mm
DK
ø±8mm
DN
ø22mm
6Packaging
3Resistance
Code
A0
Packaging
Expressed by three-digit alphanumerics. The unit is ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros that follow the two figures.
If there is a decimal point, it is expressed by the capital letter "R."
In this case, all figures are significant digits.
Ammo Pack Taping
Bulk
B0
Ex.
Code
3R0
100
Resistance
3Ω
±0Ω
5
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Basic Characteristics
Basic Characteristics
1. Zero-power Resistance of Thermistor: R
.........................................
R=R0 expB (1/T–1/T0)
(1)
Resistance vs. Temperature
102
R: Resistance in ambient temperature T (K)
(K: absolute temperature)
R0: Resistance in ambient temperature T0 (K)
B: B-Constant of Thermistor
101
2. B-Constant
as (1) formula
B= n (R/R0) / (1/T–1/T0)
1
.....................................
(2)
(3)
3. Thermal Dissipation Constant
10–1
When electric power P (mW) is spent in ambient
temperature T1 and thermistor temperature rises T2,
the formula is as follows
........................................................
P=C (T2–T1)
C: Thermal dissipation constant (mW/°C)
B=3450
B=3900
B=4100
10–2
–20
0
20 40 60 80 100 120
Temperature (°C)
Thermal dissipation constant is varied with dimensions,
measurement conditions, etc.
4. Thermal Time Constant
Thermal Time Constant
Period in which the thermistor's temperature will change
63.2% of its temperature difference from ambient
temperature T0 (°C) to T1 (°C).
T1
X
63.2%
T0
Time
Performance
Item
Condition
Resistance
B-Constant
Measured by zero-power in specified ambient temperature.
Calculated between two specified ambient temperatures by the next formula.
T and T0 is absolute temperature (K).
n (R/R0)
B =
1/Tꢀ1/T0
Shows necessary electric power that Thermistor's temperature rises 1°C by self-heating.
It is calculated by the next formula (mW/°C).
Thermal Dissipation
Constant
P
C =
TꢀT0
Shows the required electric power that causes the thermistor's temperature to rise to a specified temperature by
self-heating, at ambient temperature of 25 °C.
Rated Electric Power
Permissible Operating Current
It is possible to keep the thermistor's temperature rising max. 1°C.
Please inquire about test conditions and ratings.
6
• Please read rating and CAUTION (for storage% operating% rating% soldering% mounting and handlingꢂ in this catalog to prevent smoking and/or burning% etc.
!
R44E.pdf
Oct.6%2016
Note
!
• This catalog has only typical specifications. Therefore% please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
1
Temperature Sensor and Compensation 0201 (0603) Size
Chip NTC Thermistors' Ni barrier termination provides
excellent solderability and their unique construction
offers high stability in the application's environment.
0.15 0.05
0.15 0.05
0.60 0.0ꢀ
Features
1. Excellent solderability and high stability in the
application's environment
2. Excellent long-term stability
3. High accuracy in resistance and B-Constant
4. Reflow soldering possible
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
5. NCP series are recognized by UL/cUL.
(UL1434% File No.E137188ꢂ
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/ncp
Applications
1. Temperature compensation for transistors% ICs% and
crystal oscillators in mobile communications
2. Temperature sensor for rechargeable batteries
Resistance B-Constant
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Permissible Operating Rated Electric Typical Dissipation
Part Number
(25°C)
(ohm)
(25-50°C)
(K)
Current (25°C)
(mA)
Power (25°C)
(mW)
Constant (25°C)
(mW/°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
NCP03XM102 05RL
1.0k
1.5k
2.2k
3.3k
4.7k
6.8k
3500 1ꢀ
3500 1ꢀ
3500 1ꢀ
3500 1ꢀ
3500 1ꢀ
3380 1ꢀ
3539
3539
3539
3539
3539
3428
3428
3428
3930
3428
3428
4303
4101
4537
4303
4537
4303
4303
4537
4537
4537
3545
3545
3545
3545
3545
3434
3434
3434
3934
3434
3434
4311
4108
4543
4311
4543
4311
4311
4543
4543
4543
3560
3560
3560
3560
3560
3455
3455
3455
3944
3455
3455
4334
4131
4557
4334
4557
4334
4334
4557
4557
4557
1.00
0.81
0.67
0.55
0.46
0.38
0.31
0.31
0.31
0.25
0.21
0.17
0.14
0.14
0.12
0.12
0.10
0.10
0.10
0.08
0.06
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
p
NCP03XM152 05RL
p
NCP03XM222 05RL
p
NCP03XM332 05RL
p
NCP03XM472 05RL
p
NCP03XH682 05RL
p
NCP03XH103F05RL
10k 1ꢀ 3380 1ꢀ
NCP03XH103 05RL
10k
10k
15k
22k
33k
47k
47k
68k
68k
3380 1ꢀ
3900 1ꢀ
3380 1ꢀ
3380 1ꢀ
4250 1ꢀ
4050 3ꢀ
4485 1ꢀ
4250 1ꢀ
4485 1ꢀ
p
NCP03XV103 05RL
p
NCP03XH153 05RL
p
NCP03XH223 05RL
p
NCP03WF333 05RL
p
NCP03WB473 05RL
p
NCP03WL473 05RL
p
NCP03WF683 05RL
p
NCP03WL683 05RL
p
NCP03WF104F05RL
100k 1ꢀ 4250 1ꢀ
NCP03WF104 05RL
100k
100k
150k
220k
4250 1ꢀ
4485 1ꢀ
4485 1ꢀ
4485 1ꢀ
p
NCP03WL104 05RL
p
NCP03WL154 05RL
p
NCP03WL224 05RL
p
is filled with resistance tolerance codes (E: 3ꢀ% ꢁ: 5ꢀꢂ.
p
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating% at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
7
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Temperature Sensor and Compensation 0402 (1005) Size/NCP Series
Chip NTC Thermistors' Ni barrier termination provides
excellent solderability and their unique construction
offers high stability in the application's environment.
2
0.25 0.ꢀ0
0.25 0.ꢀ0
ꢀ.0 0.05
Features
1. Excellent solderability and high stability in the
application's environment
2. Excellent long-term stability
3. High accuracy in resistance and B-Constant
4. Reflow soldering possible
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
5. Same B-constant in the same resistance in the three
sizes (0805 size/0603 size/0402 size)
Downsize is easy for design.
6. NCP series are recognized by UL/cUL.
(UL1434, File No.E137188)
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/ncp
Applications
1. Temperature compensation for transistors, ICs, and
crystal oscillators in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric circuits
Resistance B-Constant
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Permissible Operating Rated Electric Typical Dissipation
Part Number
(25°C)
(ohm)
(25-50°C)
(K)
Current (25°C)
(mA)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mW)
(mW/°C)
NCP15XM221 03RC
220
330
470
680
1.0k
1.5k
2.2k
3.3k
4.7k
4.7k
6.8k
10k
3500 3ꢀ
3500 3ꢀ
3650 2ꢀ
3650 3ꢀ
3650 2ꢀ
3950 3ꢀ
3950 3ꢀ
3950 3ꢀ
3500 2ꢀ
3950 3ꢀ
3950 3ꢀ
3900 3ꢀ
3950 3ꢀ
3950 3ꢀ
4485 1ꢀ
4050 3ꢀ
4485 1ꢀ
4485 1ꢀ
4150 3ꢀ
4485 1ꢀ
4485 1ꢀ
4485 1ꢀ
4500 3ꢀ
4500 3ꢀ
4500 3ꢀ
3539
3539
3688
3688
3688
3982
3982
3982
3539
3982
3982
3930
3982
3982
4537
4101
4537
4537
4201
4537
4537
4537
4571
4571
4571
3545
3545
3693
3693
3693
3987
3987
3987
3545
3987
3987
3934
3987
3987
4543
4108
4543
4543
4209
4543
4543
4543
4582
4582
4582
3560
3560
3706
3706
3706
3998
3998
3998
3560
3998
3998
3944
3998
3998
4557
4131
4557
4557
4232
4557
4557
4557
4614
4614
4614
2.10
1.70
1.40
1.20
1.00
0.81
0.67
0.55
0.46
0.46
0.38
0.31
0.25
0.21
0.21
0.17
0.17
0.14
0.12
0.12
0.10
0.08
0.08
0.06
0.04
100
1
p
NCP15XM331 03RC
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
p
NCP15XQ471 03RC
p
NCP15XQ681 03RC
p
NCP15XQ102 03RC
p
NCP15XW152 03RC
p
NCP15XW222 03RC
p
NCP15XW332 03RC
p
NCP15XM472 03RC
p
NCP15XW472 03RC
p
NCP15XW682 03RC
p
NCP15XV103 03RC
p
NCP15XW153 03RC
15k
p
NCP15XW223 03RC
22k
p
NCP15WL223 03RC
22k
p
NCP15WB333 03RC
33k
p
NCP15WL333 03RC
33k
p
NCP15WL473 03RC
47k
p
NCP15WD683 03RC
68k
p
NCP15WL683 03RC
68k
p
NCP15WL104 03RC
100k
150k
150k
220k
470k
p
NCP15WL154 03RC
p
NCP15WM154 03RC
p
NCP15WM224 03RC
p
NCP15WM474 03RC
p
is filled with resistance tolerance codes (E: 3ꢀ, ꢁ: 5ꢀ).
p
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
8
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etcꢀ
!
R44Eꢀpdf
Octꢀ6,2016
Note
!
• This catalog has only typical specificationsꢀ Therefore, please approve our product specifications or transact the approval sheet for product specifications before orderingꢀ
NTC Thermistors
Temperature Sensor and Compensation 0402 (1005) Size/NCU Series
0402/0603 sized Chip NTC Thermistors have Ni
barrier termination, provide excellent solderability
and offer high stability in environment due to unique
inner constructionꢀ
This is new series, available market where request
the high reliability for wide temperature sensing and
compensationꢀ
2
0.25 0.ꢀ0
0.25 0.ꢀ0
ꢀ.0 0.05
Features
Electrode
(Cu System + Ni Plating + Sn Plating)
1ꢀ Excellent solderability and high stability in the
application's environment
(in mm)
2ꢀ Excellent long-term stability
Detailed are accessable from the following URLꢀ
http://www.murata.com/en-global/products/thermistor/ntc/ncu
3ꢀ High accuracy in resistance and B-Constant
4ꢀ Reflow soldering possible
.ꢀ Same B-constant in the same resistance in the three
sizes (080. size/0603 size/0402 size)
Downsize is easy for designꢀ
6ꢀ NCU series are recognized by UL/cULꢀ
(UL1434, File NoꢀE13ꢁ188)
Applications
1ꢀ Temperature compensation for transistors, ICs, and
crystal oscillators in mobile communications
2ꢀ Temperature sensor for rechargeable batteries
3ꢀ Temperature compensation of LCD
4ꢀ Temperature compensation in general use of electric circuits
Resistance
(25°C)
B-Constant
(25-50°C)
(K)
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Permissible Operating Rated Electric Typical Dissipation
Part Number
Current (25°C)
(mA)
Power (25°C) Constant (25°C)
(ohm)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mW)
(mW/°C)
NCU15XH103D60RC 10k 0ꢀ.5 3380 0ꢀꢁ5
3428
3428
3428
4101
4101
4101
4303
4303
4303
3434
3434
3434
4108
4108
4108
4311
4311
4311
34..
34..
34..
4131
4131
4131
4334
4334
4334
0ꢀ31
0ꢀ31
0ꢀ31
0ꢀ14
0ꢀ14
0ꢀ14
0ꢀ1
100
1
NCU15XH103F60RC
10k 15
10k
3380 15
3380 15
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
NCU15XH103 60RC
p
NCU15WB473D60RC 4ꢁk 0ꢀ.5 40.0 0ꢀ.5
NCU15WB473F60RC
4ꢁk 15
4ꢁk
40.0 15
40.0 15
NCU15WB473 60RC
p
NCU15WF104D60RC 100k 0ꢀ.5 42.0 0ꢀ.5
NCU15WF104F60RC
100k 15
100k
42.0 15
42.0 15
0ꢀ1
NCU15WF104 60RC
0ꢀ1
p
is filled with resistance tolerance codes (E: 35, ꢂ: .5)ꢀ
p
Rated Electric Power is necessary electric power for Thermistor's temperature to rise 100°C by self heating at 2.°C in still airꢀ
Operating Temperature Range: -40°C to +12.°C
If there is any additionally electrical characteristics, please contact from close sales office or websiteꢀ
9
• Please read rating and CAUTION (for storage% operating% rating% soldering% mounting and handlingꢂ in this catalog to prevent smoking and/or burning% etc.
!
R44E.pdf
Oct.6%2016
Note
!
• This catalog has only typical specifications. Therefore% please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Temperature Sensor and Compensation 0603 (1608) Size/NCP Series
Chip NTC Thermistors' Ni barrier termination provides
excellent solderability and their unique construction
offers high stability in the application's environment.
0.2-0.6
0.2-0.6
1.6 0.1ꢀ
Features
1. Excellent solderability and high stability in the
application's environment
2. Excellent long-term stability
3. High accuracy in resistance and B-constant
4. Flow/Reflow soldering possible
5. Same B-Constant in the same resistance in the three
sizes (0805 size/0603 size/0402 sizeꢂ
Downsize is easy for design.
3
Electrode
(in mm)
(Ag System + Ni Plating + Sn Plating)
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/ncp
6. NCP series are recognized by UL/cUL.
(UL1434% File No.E137188ꢂ
Applications
1. Temperature compensation for transistors% ICs% and
crystal oscillators in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Resistance B-Constant
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Permissible Operating Rated Electric Typical Dissipation
Part Number
(25°C)
(ohm)
(25-50°C)
(K)
Current (25°C)
(mA)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mW)
(mW/°C)
NCP18XM221 03RB
220
330
470
680
1.0k
1.5k
2.2k
3.3k
4.7k
4.7k
6.8k
10k
3500 3ꢀ
3500 3ꢀ
3650 2ꢀ
3650 3ꢀ
3650 2ꢀ
3950 3ꢀ
3950 3ꢀ
3950 3ꢀ
3500 2ꢀ
3950 3ꢀ
3950 3ꢀ
3900 3ꢀ
3950 3ꢀ
3950 3ꢀ
4050 3ꢀ
4150 3ꢀ
4500 3ꢀ
4500 3ꢀ
4500 3ꢀ
3539
3539
3688
3688
3688
3982
3982
3982
3539
3982
3982
3930
3982
3982
4101
4201
4571
4571
4571
3545
3545
3693
3693
3693
3987
3987
3987
3545
3987
3987
3934
3987
3987
4108
4209
4582
4582
4582
3560
3560
3706
3706
3706
3998
3998
3998
3560
3998
3998
3944
3998
3998
4131
4232
4614
4614
4614
2.10
1.70
1.40
1.20
1.00
0.81
0.67
0.55
0.46
0.46
0.38
0.31
0.25
0.21
0.17
0.12
0.08
0.06
0.04
100
1
p
NCP18XM331 03RB
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
p
NCP18XQ471 03RB
p
NCP18XQ681 03RB
p
NCP18XQ102 03RB
p
NCP18XW152 03RB
p
NCP18XW222 03RB
p
NCP18XW332 03RB
p
NCP18XM472 03RB
p
NCP18XW472 03RB
p
NCP18XW682 03RB
p
NCP18XV103 03RB
p
NCP18XW153 03RB
15k
p
NCP18XW223 03RB
22k
p
NCP18WB333 03RB
33k
p
NCP18WD683 03RB
68k
p
NCP18WM154 03RB
150k
220k
470k
p
NCP18WM224 03RB
p
NCP18WM474 03RB
p
is filled with resistance tolerance codes (E: 3ꢀ% ꢁ: 5ꢀꢂ.
p
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating% at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
10
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etcꢀ
!
R44Eꢀpdf
Octꢀ6,2016
Note
!
• This catalog has only typical specificationsꢀ Therefore, please approve our product specifications or transact the approval sheet for product specifications before orderingꢀ
NTC Thermistors
Temperature Sensor and Compensation 0603 (1608) Size/NCU Series
0402/0603 sized Chip NTC Thermistors have Ni
barrier termination, provide excellent solderability
and offer high stability in environment due to unique
inner constructionꢀ
This is new series, available market where request
the high reliability for wide temperature sensing and
compensationꢀ
0.2-0.6
0.2-0.6
1.6 0.1ꢀ
Features
3
Electrode
(Cu System + Ni Plating + Sn Plating)
1ꢀ Excellent solderability and high stability in the
application's environment
(in mm)
2ꢀ Excellent long-term stability
Detailed are accessable from the following URLꢀ
http://www.murata.com/en-global/products/thermistor/ntc/ncu
3ꢀ High accuracy in resistance and B-constant
4ꢀ Flow/Reflow soldering possible
.ꢀ Same B-Constant in the same resistance in the three
sizes (080. size/0603 size/0402 size)
Downsize is easy for designꢀ
6ꢀ NCU series are recognized by UL/cULꢀ
(UL1434, File NoꢀE13ꢁ188)
Applications
1ꢀ Temperature compensation for transistors, ICs, and
crystal oscillators in mobile communications
2ꢀ Temperature sensor for rechargeable batteries
3ꢀ Temperature compensation of LCD
4ꢀ Temperature compensation in general use of electric
circuits
Resistance
(25°C)
B-Constant
(25-50°C)
(K)
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Permissible Operating Rated Electric Typical Dissipation
Part Number
Current (25°C)
(mA)
Power (25°C) Constant (25°C)
(ohm)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mW)
(mW/°C)
NCU18XH103D60RB
NCU18XH103F60RB
10k 0ꢀ.5 3380 0ꢀꢁ5
3428
3428
3428
4101
4101
4101
4303
4303
4303
3434
3434
3434
4108
4108
4108
4311
4311
4311
34..
34..
34..
4131
4131
4131
4334
4334
4334
0ꢀ31
0ꢀ31
0ꢀ31
0ꢀ14
0ꢀ14
0ꢀ14
0ꢀ1
100
1
10k 15
10k
3380 15
3380 15
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
NCU18XH103 60RB
p
NCU18WB473D60RB 4ꢁk 0ꢀ.5 40.0 0ꢀ.5
NCU18WB473F60RB
4ꢁk 15
4ꢁk
40.0 15
40.0 15
NCU18WB473 60RB
p
NCU18WF104D60RB 100k 0ꢀ.5 42.0 0ꢀ.5
NCU18WF104F60RB
100k 15
100k
42.0 15
42.0 25
0ꢀ1
NCU18WF104 60RB
0ꢀ1
p
is filled with resistance tolerance codes (E: 35, ꢂ: .5)ꢀ
p
Rated Electric Power is necessary electric power for Thermistor's temperature to rise 100°C by self heating at 2.°C in still airꢀ
Operating Temperature Range: -40°C to +12.°C
If there is any additionally electrical characteristics, please contact from close sales office or websiteꢀ
11
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Temperature Sensor and Compensation 0805 (2012) Size
Chip NTC Thermistors' Ni barrier termination provides
excellent solderability and their unique construction
offers high stability in the application's environment.
0.2-0.7
0.2-0.7
Features
2.0 0.2
1. Excellent solderability and high stability in the
application's environment
2. Excellent long-term stability
3. High accuracy in resistance and B-constant
4. Flow/Reflow soldering possible
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
±. Same B-Constant in the same resistance in the three
sizes (080± size/0603 size/0402 size)
Downsize is easy for design.
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/ncp
6. NCP series are recognized by UL/cUL.
(UL1434, File No.E137188)
4
Applications
1. Temperature compensation for transistors, ICs, and
crystal oscillators in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Resistance B-Constant
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Permissible Operating Rated Electric Typical Dissipation
Part Number
(25°C)
(ohm)
(25-50°C)
(K)
Current (25°C)
(mA)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mW)
(mW/°C)
NCP21XM221J03RA
NCP21XQ471J03RA
NCP21XQ102J03RA
220 ±±5 3±00 ±35
470 ±±5 36±0 ±35
1.0k ±±5 36±0 ±35
3±39
3688
3688
3982
3±39
3930
3982
3982
4101
4101
4303
3±4±
3693
3693
3987
3±4±
3934
3987
3987
4108
4108
4311
3±60
3706
3706
3998
3±60
3944
3998
3998
4131
4131
4334
3.00
2.00
1.40
0.90
0.6±
0.44
0.36
0.30
0.24
0.20
0.14
200
2
200
200
200
200
200
200
200
200
200
200
2
2
2
2
2
2
2
2
2
2
NCP21XW222J03RA 2.2k ±±5 39±0 ±35
NCP21XM472J03RA
NCP21XV103J03RA
NCP21XW153J03RA
NCP21XW223J03RA
NCP21WB333J03RA
NCP21WB473J03RA
4.7k ±±5 3±00 ±35
10k ±±5 3900 ±35
1±k ±±5 39±0 ±35
22k ±±5 39±0 ±35
33k ±±5 40±0 ±35
47k ±±5 40±0 ±35
NCP21WF104J03RA 100k ±±5 42±0 ±35
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 12±°C by self-heating, at ambient temperature of 2± °C.
Operating Temperature Range: -40°C to +12±°C
12
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions
Solder Resist
Land
Chip
b
a
Dimensions (mm)
Soldering
Methods
Part Number
Chip (LxW)
0.6x0.3
a
0.25
b
0.3
c
0.3
Reflow Soldering
Reflow Soldering
Flow Soldering
Reflow Soldering
Flow Soldering
Reflow Soldering
Flow Soldering
Reflow Soldering
NCP03
NCP15/NCU15
1.0x0.5
0.4 0.4-0.5 0.5
0.6-1.0 0.8-0.9 0.6-0.8
0.6-0.8 0.6-0.7 0.6-0.8
0.6-1.2 0.8-0.9 0.6-0.8
0.6-1.2 0.6-0.7 0.6-0.8
1.0-1.1 0.9-1.0 1.0-1.2
1.0-1.1 0.6-0.7 1.0-1.2
NCP18
NCU18
NCP21
1.6x0.8
1.6x0.8
2.0x1.25
13
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Part Number NCP
XM221 NCP
XM331 NCP
XQ471 NCP
XQ681 NCP
XM102 NCP
XQ102
pp
pp
pp
pp
pp
pp
NCPppXM152 NCP
1.5kΩ
XW152
pp
Resistance
B-Constant
Temp. (°C)
–40
–35
–30
–25
–20
–15
–10
–5
220Ω
330Ω
470Ω
680Ω
1.0kΩ
1.0kΩ
1.5kΩ
3500K
3500K
3650K
3650K
3500K
3650K
3500K
3950K
Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ) Resistance (kΩ)
4947.904
3703.755
2798.873
2135.887
1645.037
1278.034
1000.620
789.612
627.752
502.474
405.010
328.480
268.044
220.000
181.576
150.668
125.681
105.336
88.717
7421.856
5555.632
4198.309
3203.831
2467.555
1917.051
1500.930
1184.418
941.628
753.711
607.514
492.720
402.066
330.000
272.365
226.002
188.521
158.004
133.076
112.588
95.666
11822.473
8767.745
6570.224
4971.784
3796.933
2923.400
2269.599
1775.225
1399.050
1110.220
887.257
713.463
577.375
470.000
384.800
316.757
262.177
218.069
182.297
153.150
129.249
109.551
93.281
17104.854
12685.248
9505.855
7193.219
5493.436
4229.599
3283.675
2568.411
2024.158
1606.275
1283.691
1032.245
835.351
680.000
556.733
458.287
379.320
315.504
263.749
221.579
186.998
158.499
134.960
115.383
99.029
21.266
16.150
12.347
9.503
7.365
5.747
4.516
3.572
2.844
2.280
1.839
1.492
1.218
1.000
0.825
0.685
0.571
0.479
0.403
0.341
0.290
0.247
0.212
0.182
0.157
0.136
0.119
0.104
0.091
0.080
0.070
0.062
0.055
0.049
25.154
18.655
13.979
10.578
8.079
6.220
4.829
3.777
2.977
2.362
1.888
1.518
1.229
1.000
0.819
0.674
0.558
0.464
0.388
0.326
0.275
0.233
0.199
0.170
0.146
0.126
0.109
0.094
0.082
0.072
0.063
0.056
0.049
0.044
31.899
24.225
18.520
14.255
11.047
8.621
6.773
5.358
4.266
3.419
2.758
2.238
1.827
1.500
1.238
1.027
0.857
0.718
0.605
0.512
0.435
0.371
0.318
0.274
0.236
0.205
0.178
0.155
0.136
0.120
0.105
0.093
0.083
0.074
51.791
37.172
27.005
19.843
14.728
11.044
8.362
6.389
4.922
3.825
2.994
2.361
1.876
1.500
1.207
0.978
0.797
0.653
0.538
0.446
0.371
0.311
0.261
0.221
0.187
0.160
0.137
0.117
0.101
0.088
0.076
0.067
0.058
0.051
0
5
10
15
20
25
30
35
40
45
50
55
75.059
60
63.777
65
54.415
81.622
70
46.631
69.946
75
40.115
60.172
79.750
80
34.637
51.955
68.446
85
30.013
45.019
58.996
85.356
90
26.110
39.165
51.036
73.839
95
22.790
34.186
44.332
64.140
100
105
110
115
120
125
19.957
29.935
38.640
55.905
17.541
26.312
33.790
48.888
15.453
23.180
29.664
42.918
13.663
20.494
26.123
37.795
12.114
18.171
23.091
33.409
10.778
16.168
20.472
29.618
Part Number NCP
Resistance
pp
XM222 NCP
XW222 NCPppXM332 NCPppXW332 NCP
XM472 NCPppXW472 NCP
XH682
NCP
pp
pp
pp
XW682
pp
2.2kΩ
2.2kΩ
3.3kΩ
3.3kΩ
4.7kΩ
4.7kΩ
6.8kΩ
3380K
6.8kΩ
3950K
B-Constant
3500K
3950K
3500K
3950K
3500K
3950K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ)
234.787
168.515
122.422
89.953
66.766
50.066
37.906
28.963
22.313
17.338
13.571
10.705
8.503
–40
–35
–30
–25
–20
–15
–10
–5
46.786
35.530
27.162
20.907
16.203
12.644
9.934
7.858
6.257
5.015
4.045
3.283
2.680
2.200
1.816
1.507
1.257
1.053
0.887
0.751
0.638
0.544
0.466
0.401
0.346
0.300
0.261
0.228
0.200
0.175
0.155
0.137
0.121
0.108
75.961
54.520
39.607
29.103
21.601
16.198
12.264
9.370
7.219
5.609
4.391
3.463
2.751
2.200
1.771
1.434
1.169
0.958
0.789
0.654
0.545
0.456
0.383
0.324
0.275
0.234
0.200
0.172
0.149
0.129
0.112
0.098
0.085
0.075
70.179
53.295
40.743
31.360
24.304
18.966
14.901
11.787
9.386
7.523
6.067
4.924
4.019
3.300
2.724
2.260
1.885
1.580
1.331
1.126
0.957
0.816
0.700
0.602
0.520
0.450
0.392
0.342
0.299
0.263
0.232
0.205
0.182
0.162
105.705
79.126
59.794
45.630
35.144
27.303
21.377
16.869
13.411
10.735
8.653
7.018
5.726
4.700
3.879
3.219
2.685
2.250
1.895
1.604
1.363
1.163
0.996
0.857
0.740
0.641
0.558
0.487
0.426
0.375
0.330
0.292
0.259
0.230
162.279
116.474
84.615
62.173
46.147
34.604
26.200
20.018
15.423
11.984
9.380
7.399
5.877
4.700
3.783
3.064
2.497
2.046
1.686
1.397
1.164
0.974
0.819
0.692
0.587
0.500
0.428
0.368
0.318
0.275
0.239
0.208
0.182
0.160
133.043
100.756
77.076
59.540
46.401
36.482
28.904
23.047
18.509
14.974
12.189
9.978
8.215
6.800
5.654
4.725
3.967
3.344
2.829
2.404
2.050
1.759
1.515
1.309
1.135
0.988
0.862
0.755
0.662
0.583
0.515
0.457
0.406
0.361
113.941
81.779
59.411
43.654
32.401
24.297
18.396
14.055
10.829
8.414
6.586
5.195
4.126
3.300
2.656
2.152
1.753
1.437
1.184
0.981
0.817
0.684
0.575
0.486
0.412
0.351
0.301
0.258
0.223
0.193
0.168
0.146
0.128
0.113
0
5
10
15
20
25
6.800
30
5.474
35
4.434
40
3.613
45
2.961
50
2.440
55
2.022
60
1.683
65
1.409
70
1.185
75
1.001
80
0.849
85
0.724
90
0.620
95
0.532
100
105
110
115
120
125
0.459
0.398
0.346
0.302
0.264
0.232
Continued on the following page.
14
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
XH153 NCP
XW153
NCP
pp
XH223
NCP
WB333 NCP
pp
WF333
Part Number NCP
Resistance
XV103 NCP
pp
NCP
XW223 NCP
WL223
pp
pp
pp
pp
pp
22kΩ
33kΩ
33kΩ
10kΩ
15kΩ
15kΩ
22kΩ
22kΩ
3380K
3950K
3380K
4050K
4250K
B-Constant
3900K
3950K
4485K
Resistance (kΩ)
430.434
325.976
249.364
192.629
150.121
118.029
93.514
74.563
59.881
48.446
39.436
32.282
26.577
22.000
18.292
15.285
12.834
10.817
9.154
Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ) Resistance (kΩ)
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
–40
–35
–30
–25
–20
–15
–10
–5
293.478
222.256
170.021
131.338
102.355
80.474
63.759
50.838
40.828
33.032
26.888
22.010
18.121
15.000
12.472
10.422
8.751
1227.263
874.449
630.851
460.457
339.797
253.363
190.766
144.964
111.087
85.842
66.861
52.470
41.471
33.000
26.430
21.298
17.266
14.076
11.538
9.506
328.996
237.387
173.185
127.773
95.327
71.746
54.564
41.813
32.330
25.194
19.785
15.651
12.468
10.000
8.072
517.912
371.724
270.048
198.426
147.278
110.439
83.617
63.888
49.221
38.245
29.936
23.613
18.756
15.000
12.074
9.780
759.605
545.196
396.070
291.025
216.008
161.977
122.638
93.702
72.191
56.093
43.907
34.633
27.509
22.000
17.709
14.344
11.688
9.578
1073.436
753.900
535.073
383.590
277.643
202.813
149.462
111.082
83.233
62.858
47.831
36.664
28.304
22.000
17.214
13.557
10.744
8.566
1451.049
1019.238
725.084
522.021
379.842
279.371
207.566
155.639
117.814
89.925
69.204
53.675
41.937
33.000
26.143
20.845
16.723
13.498
10.954
8.940
0
5
10
15
20
25
30
35
6.556
40
5.356
7.969
45
7.375
4.401
6.531
50
6.241
3.635
5.382
7.894
6.871
55
5.302
7.777
3.019
4.459
6.540
5.544
60
4.521
6.631
7.870
7.334
2.521
3.713
5.446
4.498
65
3.879
5.690
6.549
6.046
2.115
3.108
4.559
3.669
70
3.341
4.901
5.475
5.011
1.781
2.613
3.832
3.009
75
2.887
4.234
4.595
4.170
1.509
2.208
3.239
2.479
80
2.503
3.671
3.874
3.487
1.284
1.873
2.748
2.052
85
2.178
3.195
3.282
2.928
1.097
1.597
2.342
1.707
90
1.902
2.790
2.789
2.469
0.941
1.367
2.004
1.426
95
1.664
2.441
2.379
2.091
0.810
1.174
1.722
1.196
100
105
110
115
120
125
1.461
2.142
2.038
1.777
0.701
1.013
1.486
1.008
1.287
1.888
1.751
1.516
0.608
0.878
1.287
0.852
1.137
1.668
1.509
1.298
0.530
0.763
1.119
0.724
1.007
1.477
1.306
1.116
0.463
0.665
0.975
0.617
0.895
1.312
1.134
0.962
0.406
0.582
0.854
0.528
0.797
1.169
0.987
0.832
0.358
0.511
0.750
0.454
Part Number NCP
Resistance
pp
WL333 NCP
pp
WL473 NCP
WD683 NCP
WF683
NCP
pp
WL683 NCP
pp
WL104 NCP
pp
WL154 NCP
WM154
pp
pp
pp
33kΩ
4485K
47kΩ
4485K
68kΩ
4485K
100kΩ
4485K
150kΩ
4485K
150kΩ
4500K
68kΩ
4150K
68kΩ
B-Constant
4250K
Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
–40
–35
–30
–25
–20
–15
–10
–5
1610.154
1130.850
802.609
575.385
416.464
304.219
224.193
166.623
124.850
94.287
71.747
54.996
42.455
33.000
25.822
20.335
16.115
12.849
10.306
8.317
2293.249
1610.605
1143.110
819.487
593.146
433.281
319.305
237.312
177.816
134.287
102.184
78.327
60.467
47.000
36.776
28.962
22.952
18.301
14.679
11.845
9.610
2735.359
1937.391
1389.345
1008.014
738.978
547.456
409.600
309.217
235.606
180.980
140.139
109.344
85.929
68.000
54.167
43.421
35.016
28.406
23.166
18.997
15.657
12.967
10.794
9.021
2990.041
2100.247
1494.113
1075.679
782.705
575.674
427.712
320.710
242.768
185.300
142.603
110.602
86.415
68.000
53.871
42.954
34.460
27.814
22.572
18.422
15.113
12.459
10.325
8.592
3317.893
2330.237
1653.862
1185.641
858.168
626.875
461.974
343.345
257.266
194.287
147.841
113.325
87.484
68.000
53.208
41.903
33.208
26.477
21.237
17.137
13.904
11.342
9.299
4879.254
3426.818
2432.149
1743.590
1262.012
921.875
679.373
504.919
378.333
285.717
217.414
166.654
128.653
100.000
78.247
61.622
48.835
38.937
31.231
25.202
20.448
16.679
13.675
11.268
9.329
7318.881
5140.228
3648.224
2615.385
1893.018
1382.813
1019.059
757.379
567.499
428.575
326.121
249.981
192.979
150.000
117.370
92.433
73.252
58.406
46.846
37.803
30.671
25.018
20.513
16.902
13.993
11.638
9.721
7899.466
5466.118
3834.499
2720.523
1951.216
1415.565
1036.984
767.079
572.667
431.264
327.405
250.538
193.166
150.000
117.281
92.293
73.090
58.240
46.665
37.605
30.453
24.804
20.293
16.679
13.776
11.428
9.520
0
5
10
15
20
25
30
35
40
45
50
55
60
6.748
65
5.504
7.839
70
4.513
6.427
75
3.718
5.296
7.662
80
3.078
4.384
7.575
7.185
6.343
85
2.560
3.646
6.387
6.033
5.276
7.758
90
2.139
3.046
5.407
5.087
4.407
6.481
95
1.794
2.555
4.598
4.309
3.697
5.437
8.155
7.966
100
105
110
115
120
125
1.511
2.152
3.922
3.661
3.114
4.580
6.869
6.688
1.278
1.820
3.124
2.634
3.873
5.810
5.639
3.359
1.085
1.546
2.675
2.236
3.289
4.933
4.772
2.887
0.925
1.318
2.299
1.907
2.804
4.206
4.052
2.489
0.792
1.128
1.983
1.632
2.400
3.601
3.454
2.155
0.681
0.970
1.715
1.403
2.064
3.096
2.955
1.870
Continued on the following page.
15
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Part Number
Resistance
B-Constant
Temp. (°C)
–40
–35
–30
–25
–20
–15
–10
–5
NCP
WM224 NCPppWM474
NCP
WL224
pp
pp
220kΩ
4500K
470kΩ
4500K
220kΩ
4485K
Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ)
10734.358
7539.001
5350.729
3835.898
2776.427
2028.126
1494.620
1110.822
832.332
628.577
478.310
366.639
283.036
220.000
172.143
135.569
107.436
85.662
11585.884
8016.973
5623.931
3990.100
2861.784
2076.162
1520.909
1125.049
839.912
632.521
480.194
367.455
283.310
220.000
172.012
135.364
107.198
85.419
24751.661
17127.169
12014.762
8524.305
6113.811
4435.437
3249.216
2403.515
1794.358
1351.294
1025.870
785.018
605.252
470.000
367.480
289.186
229.014
182.485
146.215
117.828
95.420
0
5
10
15
20
25
30
35
40
45
50
68.708
68.441
55
55.444
55.153
60
44.984
44.665
65
36.694
36.379
77.718
70
30.085
29.763
63.584
75
24.789
24.462
52.260
80
20.523
20.205
43.166
85
17.068
16.761
35.808
90
14.258
13.962
29.828
95
11.961
11.684
24.961
100
105
110
115
120
125
10.075
9.809
20.955
8.521
8.270
17.668
7.236
6.998
14.951
6.169
5.942
12.695
5.281
5.067
10.824
4.540
4.334
9.259
Part Number NCUppXH103D NCU
XH103 NCU
WB473D NCU
WB473 NCU
WF104D
NCU
pp
pp
pp
pp
WF104
pp
Resistance
B-Constant
10kΩ 0.5ꢀ
3380K
10kΩ
3380K
47kΩ 0.5ꢀ
4050K
47kΩ
4050K
100kΩ 0.5ꢀ
4250K
100kΩ
4250K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ)
4397.119
3088.599
2197.225
1581.881
1151.037
846.579
628.988
471.632
357.012
272.500
209.710
162.651
127.080
100.000
79.222
63.167
50.677
40.904
33.195
27.091
22.224
18.323
15.184
12.635
10.566
8.873
197.390
149.390
114.340
88.381
68.915
54.166
42.889
34.196
27.445
22.165
18.010
14.720
12.099
10.000
8.309
195.652
148.171
113.347
87.559
68.237
53.650
42.506
33.892
27.219
22.021
17.926
14.674
12.081
10.000
8.315
1690.586
1215.318
882.908
647.911
480.069
359.009
270.868
206.113
158.126
122.267
95.256
74.754
59.075
47.000
37.636
30.326
24.583
20.043
16.433
13.545
11.223
9.345
4221.283
2995.044
2146.996
1554.599
1136.690
839.019
624.987
469.678
355.975
272.011
209.489
162.559
127.057
100.000
79.222
63.167
50.677
40.904
33.195
27.091
22.224
18.323
15.184
12.635
10.566
8.873
–40
–35
–30
–25
–20
–15
–10
–5
1747.920
1245.428
898.485
655.802
483.954
360.850
271.697
206.463
158.214
122.259
95.227
74.730
59.065
47.000
37.643
30.334
24.591
20.048
16.433
13.539
11.209
9.328
0
5
10
15
20
25
30
6.939
6.948
35
5.824
5.834
40
4.911
4.917
45
4.160
4.161
50
3.539
3.535
55
3.024
3.014
60
2.593
2.586
65
2.233
2.228
7.818
7.798
70
1.929
1.925
6.571
6.544
75
1.673
1.669
5.548
5.518
80
1.455
1.452
4.704
4.674
85
1.270
1.268
4.004
3.972
7.481
7.481
90
1.112
1.110
3.422
3.388
6.337
6.337
95
0.976
0.974
2.936
2.902
5.384
5.384
100
105
110
115
120
125
0.860
0.858
2.528
2.494
4.594
4.594
0.759
0.758
2.184
2.150
3.934
3.934
0.673
0.672
1.893
1.860
3.380
3.380
0.598
0.596
1.646
1.615
2.916
2.916
0.532
0.531
1.436
1.406
2.522
2.522
Continued on the following page.
16
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Caution/Notice
!
Caution (Storage and Operating Conditions)
!
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because
all of these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
2. Volatile or flammable gas
3. Dusty conditions
4. Under vacuum, or under high or low pressure
5. Wet or humid locations
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
8. Other places where similar hazardous conditions
exist
Caution (Others)
!
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damage that may be
caused by the abnormal function or the failure of our
product.
Notice (Storage and Operating Conditions)
To keep the solderability of the product from degrading,
the following storage conditions are recommended.
1. Storage condition:
Temperature -10 to +40°C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
3. Storage place:
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
Notice (Handling)
The ceramic of this product is fragile, and care must
be taken not to load an excessive press-force or to
cause a shock at handling.
Such forces may cause cracking or chipping.
17
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Caution/Notice
!
Notice (Soldering and Mounting)
1. Mounting Position
Component Direction
Choose a mounting position that minimizes the stress
imposed on the chip during flexing or bending of the
board.
Locate this
product
horizontal to
the direction in
which stress
acts.
Mounting Close to Board Separation Line
C
Perforation
Holes
B
Keep this product on the PC
Board away from the
Separation Line.
D
A
Slit
Worst
← A-C-B-D → Better
2. Allowable Soldering Temperature and Time
(a) Solder within the temperature and time combinations
indicated by the slanted lines in the following graphs.
(b) Excessive soldering conditions may cause dissolution of
metallization or deterioration of solder-wetting on the
external electrode.
(c) In case of repeated soldering, the accumulated soldering
time should be within the range shown in the figure
below. (For example, Reflow peak temperature: 260°C,
twice -> The total accumulated soldering time at 260°C
is within 30 seconds.)
NCP03/15 Series, NCU15 Series
Allowable Reflow Soldering Temp. and Time
280
270
260
250
240
230
220
0
10 20 30 40 50 60 70 80 90
Time (sec.)
NCP18/21 Series, NCU18 Series
Allowable Flow Soldering Temp. and Time
Allowable Reflow Soldering Temp. and Time
280
270
260
250
240
230
220
210
280
270
260
250
240
230
220
210
0
10
20
30
0
10 20 30 40 50 60 70 80 90 100110
Time (sec.)
Time (sec.)
Continued on the following page.
18
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Caution/Notice
!
Continuel ꢄrom the preceling page.
3. Recommenlel Temperature Profiꢁe ꢄor Soꢁlering
(a) Inꢀufficient preheating may cauꢀe a crack on the ceramic
ꢃoly. The lifference ꢃetꢅeen preheating temperature
anl maximum temperature in the profiꢁe ꢀhaꢁꢁ ꢃe 100 °C.
(ꢃ) Rapil cooꢁing ꢃy lipping in ꢀoꢁvent or ꢃy other meanꢀ iꢀ
not recommenlel.
NCP03/15 Serieꢀꢂ NCU15 Serieꢀ
Refloꢅ Soꢁlering Conlitionꢀ
Graluaꢁ Cooꢁing
Soꢁlering
(in air)
Preheating (in air)
300
200
100
0
1-2 min.
*20ꢀec.
Preheating: 160 10°Cꢂ 1-2 min.
Soꢁlering: 240-270°Cꢂ 20ꢀec.
* In caꢀe oꢄ repeatel ꢀoꢁleringꢂ the accumuꢁatel ꢀoꢁlering
time ꢀhouꢁl ꢃe ꢅithin the range ꢀhoꢅn in the figure oꢄ
ꢀection 2.
NCP18/21 Serieꢀꢂ NCU18 Serieꢀ
Fꢁoꢅ Soꢁlering Conlitionꢀ
Refloꢅ Soꢁlering Conlitionꢀ
Graluaꢁ Cooꢁing
Graluaꢁ Cooꢁing
Soꢁlering
(in air)
Preheating (in air)
Soꢁlering
Preheating (in air)
300
(in air)
300
200
100
0
200
100
0
1-2 min.
1-2 min.
*10ꢀec.
*20ꢀec.
Preheating: 160 10°Cꢂ 1-2 min.
Soꢁlering: 230-260°Cꢂ 10ꢀec.
Preheating: 160 10°Cꢂ 1-2 min.
Soꢁlering: 230-270°Cꢂ 20ꢀec.
4. Soꢁler anl Fꢁux
(1) Soꢁler anl Paꢀte
(a) Refloꢅ Soꢁlering: NCP03/15/18/21 Serieꢀꢂ NCU15/18 Serieꢀ
Uꢀe RA/RMA type or equivaꢁent type oꢄ ꢀoꢁler paꢀte. For
your reꢄerenceꢂ ꢅe uꢀe the ꢀoꢁler paꢀte ꢃeꢁoꢅ ꢄor any
internaꢁ teꢀtꢀ oꢄ thiꢀ proluct.
aSn:Pꢃ=63ꢅt%:37ꢅt%
aSn:Ag:Cu=96.5ꢅt%:3.0ꢅt%:0.5ꢅt%
(2) Fꢁux
Uꢀe roꢀin type flux in the ꢀoꢁlering proceꢀꢀ.
Iꢄ the flux ꢁiꢀtel ꢃeꢁoꢅ iꢀ uꢀelꢂ ꢀome proꢃꢁemꢀ might ꢃe
cauꢀel in the proluct characteriꢀticꢀ anl reꢁiaꢃiꢁity.
Pꢁeaꢀe lo not uꢀe the ꢄoꢁꢁoꢅing flux.
a Strong acilic flux (ꢅith haꢁile content exceeling
0.1ꢅt%).
a Water-ꢀoꢁuꢃꢁe flux
(*Water-ꢀoꢁuꢃꢁe flux can ꢃe lefinel aꢀ non-roꢀin type
flux incꢁuling ꢅaꢀh-type flux anl non-ꢅaꢀh-type flux.)
aRMA9086 90-4-M20 (Sn:Pꢃ=63ꢅt%:37ꢅt%)
(Manuꢄacturel ꢃy Aꢁpha Metaꢁꢀ Japan Ltl.)
a
M705-221BM5-42-11 (Sn:Ag:Cu=96.5ꢅt%:3.0ꢅt%:0.5ꢅt%)
(Manuꢄacturel ꢃy Senju Metaꢁ Inluꢀtry Co.ꢂ Ltl.)
(ꢃ) Fꢁoꢅ Soꢁlering: NCP18/21 Serieꢀꢂ NCU18 Serieꢀ
We uꢀe the ꢀoꢁler paꢀte ꢃeꢁoꢅ ꢄor any internaꢁ teꢀtꢀ oꢄ
thiꢀ proluct.
5. Cꢁeaning Conlitionꢀ
NCP03/15, NCU15
NCP18/21, NCU18
For removing the flux afer ꢀoꢁleringꢂ oꢃꢀerve the ꢄoꢁꢁoꢅing
pointꢀ in orler to avoil leterioration oꢄ the characteriꢀticꢀ
or any change oꢄ the externaꢁ eꢁectroleꢀ' quaꢁity.
a Pꢁeaꢀe keep mountel partꢀ anl a ꢀuꢃꢀtrate ꢄrom an
occurrence oꢄ reꢀonance in uꢁtraꢀonic cꢁeaning.
a Pꢁeaꢀe lo not cꢁean the proluctꢀ in the caꢀe oꢄ uꢀing a
non-ꢅaꢀh-type flux.
Solvent
Iꢀopropyꢁ Aꢁcohoꢁ
Iꢀopropyꢁ Aꢁcohoꢁ
Leꢀꢀ than 5 minuteꢀ at
room temp. or ꢁeꢀꢀ than room temp. or ꢁeꢀꢀ than
2 minuteꢀ at 40°C max. 2 minuteꢀ at 40°C max.
Leꢀꢀ than 5 minuteꢀ at
Dipping Cleaning
Leꢀꢀ than 5 minuteꢀ anl Leꢀꢀ than 1 minute anl
20W/
Frequency oꢄ 28kHz to
40kHz
Ultrasonic
Cleaning
20W/
Frequency oꢄ ꢀeveraꢁ
10kHz to 100kHz
6. Drying
Afer cꢁeaningꢂ promptꢁy lry thiꢀ proluct.
Continuel on the ꢄoꢁꢁoꢅing page.
19
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Caution/Notice
!
Continued from the preceding page.
7. Printing Conditions of Solder Paste
o The amount of solder is critical. Standard height of fillet is
shown in the table below.
Reference: Optimum Solder Amount
o Too much solder may cause mechanical stress, resulting
in cracking, mechanical and/or electronic damage.
E
T
Electrode
Solder
Solder
Part Number
Solder Paste Thickness
T
1/3E<T<E
NCP03
100μm
150μm
200μm
= =
1/3E<T<E
NCP15, NCU15
= =
0.2mm<T<E
= =
NCP18/NCP21, NCU18
8. Adhesive Application and Curing
o Thin or insufficient adhesive may result in loose
component contact with land during flow soldering.
o Low viscosity adhesive causes chips to slip aꢀer
mounting.
20
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Package
Minimum Quantity Guide
Quantity (pcs.)
Part Number
Paper Tape Embossed Tape
NCP03
15000
10000
4000
-
NCP15, NCU15
NCP18, NCU18
NCP21
-
4000
Tape Carrier Packaging
1. Dimensions of Reel
2.0 0.5
ø13.0 0.2
ø21.0 0.8
9.0–+1.0
0
ø180+–0
1.5
(in mm)
2. Taping Method
(1) A tape in a reel contains Leader unit and Trailer unit where
products are not packed. (Please refer to the figure at the
right.)
(2) The top and base tapes or plastic and cover tape are not
stuck at the first five pitches minimum.
Leader Unit
190-250 210-250
Vacant Section Top Tape alone
Cover Tape alone
40 min.
Trailer Unit
Chip-mounting Unit
(3) A label should be attached on the reel. (MURATA's part
number, inspection number and quantity should be marked
on the label.)
Direction of Feed
(in mm)
(4) Taping reels are packed in a package.
Continued on the following page.
21
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Package
Continued from the preceding page.
3. Paper Tape (NCP03/15/18 Series, NCU15/18 Series)
NCP03 Series
NCP15, NCU15 Series
2.0 0.05
2.0 0.05
0.5 max.
0.8 max.
4.0 0.1
4.0 0.1
ø1.5+0.1/–0
ø1.5+0.1/–0
*
*
0.38
0.65
Direction of Feed
Direction of Feed
* Reference Value
* Reference Value
NCP18, NCU18 Series
2.0 0.05
1.1 max.
4.0 0.1
4.0 0.1
ø1.5+0.1/–0
*
1.05
Direction of Feed
* Reference Value
(in mm)
(1) Other Conditions
(a) Packaging
Products are packaged in the cavity of the base tape and
sealed by a top tape and bottom tape.
(b) Tape
The top tape and bottom tape have no joints and
products are packaged and sealed in the cavity of the
base tape, continuously.
(2) Peeling Force of Top Tape
F
165-180°
* 1 Peeling angle: 165 to 180° against the fixed surface of tape.
* 2 Peeling speed: 300mm/min.
* 3 Peeling force: 0.1 - 0.6N
(3) Pull Strength
Pull strength of top tape is specified at 10N minimum.
Pull strength of bottom tape should be specified 5N
minimum.
Continued on the following page.
22
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor and Compensation Chip Type Package
Continued from the preceding page.
4. Embossed Tape (NCP21 Series)
(1) Other Conditions
2.0 0.05
4.0 0.1 4.0 0.1
1.05
0.2
(a) Packaging
+0.1
-1
ø1.5
Products are packaged in the each cavity of Embossed
tape and sealed by Cover tape.
(b) Tape
Cover tape has no joints.
+0.3
*
1.45
ø1.0
-0
* Reference Value
(in mm)
Direction of Feed
(2) Peeling Force of Cover Tape
165-180°
* 1 Peeling angle: 165 to 180° against the fixed surface of tape.
* 2 Peeling speed: 300mm/min.
* 3 Peeling force: 0.1 - 0.7N
(3) Tape Strength
Pull strength of Embossed tape and Cover tape should be
specified 10N minimum.
23
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Temperature Sensor Thermo String Type
1.2±±.ꢀ
1.2±±.ꢀ
This product is a small flexible lead type NTC Thermistor
with a small head and a thin lead wire.
Features
1. This small and highly accurate NTC Thermistor
provides extremely precise temperature sensing.
2. The small sensing head and thin lead wire deliver
temperature sensing in a narrow space.
3. Flexibility and a wide variety of lengths (25mm to
150mm)
ø±.ꢁ±±±.±5
enable the design of flexible temperature sensing
architectures.
4. This product is compatible with our 0402 (EIA) size
chip Thermistor.
(in mm)
The full length 25mm, ꢁ± to 15±mm interval 1±mm.
NXFT15_1B Type (twist)
1.2±±.ꢀ
1.2±±.ꢀ
5. Excellent long-term stability
6. This is a halogen free product. *
* Cl= max.900ppm, Br=max.900ppm and
Cl+Br=max.1500ppm
7. NXFT series are recognized by UL/cUL.
(UL1434, File No.E137188).
Applications
ø±.ꢁ±±±.±5
1. Temperature compensation for transistors, ICs, and
crystal oscillators in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
5
(in mm)
The full length 25mm, ꢁ± to 15±mm interval 1±mm.
NXFT15_2B Type (without twist)
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/nxf
Resistance B-Constant
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Operating Current Rated Electric Typical Dissipation Thermal Time
Part Number
(25°C)
(ohm)
(25-50°C)
(K)
for Sensor (25°C) Power (25°C)
Constant (25°C)
(mW/°C)
Constant
(25°C) (s)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NXFT15XH103FA
NXFT15XV103FA
NXFT15WB473FA
NXFT15WF104FA
B
10k 1ꢀ
10k 1ꢀ
47k 1ꢀ
3380 1ꢀ
3936 1ꢀ
4050 1ꢀ
3428
3971
4101
4303
3434
3977
4108
4311
3455
3988
4131
4334
0.12
7.5
1.5
1.5
1.5
1.5
4
4
4
4
p ppp
B
0.12
0.06
0.04
7.5
7.5
7.5
p ppp
B
p ppp
B
p ppp
100k 1ꢀ 4250 1ꢀ
is filled with lead shape (1: twist, 2: without twist).
p
is filled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm)
ppp
Operating Current for Sensor rises Thermistor's temperature by 0.1°C
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 30°C by self-heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
24
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Thermo String Type Specifications and Test Methods
No.
1
Item
Specifications
Test Methods
High Temperature
Storage Test
125±2°C in air, for 1±±± +ꢀ8/-± hours without loading.
· Resistance (R25°C) fluctuation rate: less than ±1ꢃ.
· B-Constant (B25/5±°C) fluctuation rate: less than ±1ꢃ.
Low Temperature
Storage Test
-ꢀ± +±/-ꢁ°C in air, for 1±±± +ꢀ8/-± hours without loading.
2
3
6±±2°C, 9± to 95ꢃRH in air, for 1±±± +ꢀ8/-± hours without
loading.
Humidity
Storage Test
-ꢀ± +±/-ꢁ°C, ꢁ± minutes in air
+25±2°C, 1± to 15 minutes in air
+125±2°C, ꢁ± minutes in air
+25 +2/-±°C, 1± to 15 minutes in air (1 cycle)
Continuous 1±± cycles, without loading.
· Resistance (R25°C) fluctuation rate: less than ±2ꢃ.
· B-Constant (B25/5±°C) fluctuation rate: less than ±1ꢃ.
Temperature
Cycle
4
85±2°C in air, with ꢄ'perating Current for Sensorꢄ for 1±±±
+ꢀ8/-± hrs.
High Temperature
Load
5
6
2mm length of coating resin from the top of Thermistor is to be
dipped into beads of lead (Pb), and DC1±±V 1 minute is applied
to circuit between beads of lead (Pb) and lead wire.
Insulation Break -
down Voltage
· No damage electrical characteristics at DC1±± V, 1 min.
Both lead wires are dipped into ꢁ5±±1±°C solder for ꢁ.5±±.5
seconds, or 26±±5°C solder for 1±±1 seconds according to
Fig-1 (solder <JIS Z ꢁ282 SnAgCu>).
· Resistance (R25°C) fluctuation rate: less than ±1ꢃ.
· B-Constant (B25/5±°C) fluctuation rate: less than ±1ꢃ.
Resistance to
Soldering Heat
7
1 to 2mm
Solder
5
Fig-1
Both lead wires are dipped into flux (25wtꢃ colophony <JIS K
59±2> isopropyl alcohol <JIS K 88ꢁ9>) for 5 to 1± seconds.
Then both lead wires are dipped into 2ꢀ5±5°C solder
More than 9±ꢃ of lead wire surface shall be covered by solder.
8
Solderability
<JIS Z ꢁ282 SnAgCu> for 2±±.5 seconds according to Fig-1.
The lead wire shall be inserted in a ø1.±mm hole until resin part
contacts with a substrate as shown in fig.-2, and 1N force for
1± seconds shall be applied to the lead wire.
· Resistance (R25°C) fluctuation rate: less than ±1ꢃ.
· B-Constant (B25/5±°C) fluctuation rate: less than ±1ꢃ.
Lead Wire
Pull Strength
9
1N (1± sec.)
Fig-2
Hold the lead wires as in Fig-ꢁ. Bend by 9± degrees and again
bend back to the initial position. Then bend to the other side by
9± degrees and again bend back to the initial position. Aꢂer
bending process, 1±N force for ꢁ seconds shall be applied to
the lead wire.
Lead Wire
Bending Strength
· Lead wire does not break.
10
1±N (ꢁ sec.)
Fig-ꢁ
* · R25 is zero-power resistance at 25°C.
· B25/5± is calculated by zero-power resistance of Thermistor in 25°C-5±°C.
· Aꢂer each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
Continued on the following page.
25
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Thermo String Type Specifications and Test Methods
Continued from the preceding page.
No. Item
Specifications
Test Methods
NTC Thermistor shall be dropped without any force onto
concrete floor from 1 meter height one time.
11 Free Fall
NTC Thermistor shall be fixed to the vibration test equipment.
Vibration of total 1.5 mm amplitude, Frequency sequence of
10Hz - 55Hz - 10Hz in 1 minute shall be applied for right
angled 3 directions for 2 hours duration each.
· Resistance (R25°C) fluctuation rate: less than 1ꢀ.
· B-Constant (B25/50°C) fluctuation rate: less than 1ꢀ.
· No visible damage at resin part.
12 Vibration
Mount
Oscillating
Direction Z
Solder is attached
from the reverse side.
Oscillating
Direction Y
Oscillating
Direction X
* · R25 is zero-power resistance at 25°C.
· B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C.
· Aꢁer each test, NTC Thermistor should be ꢂept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
5
26
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Temperature Sensor Lead Type
4.0 max.
This thermistor is for normal temperature level sensors
having self-subsistence due to strong lead strength
based on chip NTC.
2.0 max.
Features
1. This highly accurate NTC Thermistor provides extremely
precise temperature sensing.
2.5
1
2. This product is compatible with 1005 (1.0mm x 0.5mm)
size NTC Thermistor.
ø0.40 0.05
3. The variation per hour of this product is highly stable.
4. This product is produced with an automation line that
was consistent from lead to packaging so that a product
of uniform quality may be obtained at low cost in large
quantities.
5. Since this product has strong lead intensity with original
lead mounting technique, it is bent at the time of use and
can withstand processing, etc., readily.
The full length 10.0 to 40.0mm interval 10.0mm
(in mm)
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/nxr
Taping package can be supported.
Applications
1. For temperature detection of a rechargeable battery pack
2. For temperature detection of a charge circuit
3. For temperature detection of a printer head
4. For temperature detection of a DC fan motor
5. For temperature detection of home electronics
Resistance B-Constant
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Operating Current Rated Electric Typical Dissipation Thermal Time
Part Number
(25°C)
(ohm)
(25-50°C)
(K)
for Sensor (25°C) Power (25°C)
Constant (25°C)
(mW/°C)
Constant
(25°C) (s)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
6
NXRT15XM202EA1B
NXRT15XV502FA1B
NXRT15XH103FA1B
NXRT15XV103FA1B
2k 3ꢀ 3500 1.5ꢀ
3539
3972
3428
3971
4101
4101
4303
3545
3977
3434
3977
4108
4108
4311
3560
3989
3455
3988
4131
4131
4334
0.27
7.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
4
4
4
4
4
4
4
ppp
5k 1ꢀ
10k 1ꢀ
10k 1ꢀ
33k 5ꢀ
47k 1ꢀ
3936 1ꢀ
3380 1ꢀ
3936 1ꢀ
4050 3ꢀ
4050 1ꢀ
0.17
0.12
0.12
0.07
0.06
0.04
7.5
7.5
7.5
7.5
7.5
7.5
ppp
ppp
ppp
NXRT15WB333JA1B
NXRT15WB473FA1B
NXRT15WF104FA1B
ppp
ppp
ppp
100k 1ꢀ 4250 1ꢀ
is filled with Total-length codes. (10 to 40mm interval 10mm, ex. 040=40mm)
ppp
Operating Current for Sensor rises Thermistor's temperature by 0.1°C.
Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air.
Taping type of part numbers with "3A016" is available (Lead Spacing=5mm).
Operating Temperature Range: -40°C to +125°C
27
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Lead Type Specifications and Test Methods
No.
1
Item
Specifications
Test Methods
Low Temperature
Storage Test
-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.
· Resistance (R25°C) fluctuation rate: less than 1ꢀ.
· B-Constant (B25/50°C) fluctuation rate: less than 1ꢀ.
High Temperature
Storage Test
125 2°C in air, for 1000 +48/-0 hours without loading.
2
3
4
85 2°C in air, with ꢃOperating Current for Sensorꢄ for
1000 +48/-0 hrs.
High Temperature
Load
60 2°C, 90 to 95ꢀRH in air, for 1000 +48/-0 hours without
loading.
Humidity Storage
Test
· Resistance (R25°C) fluctuation rate: less than 2ꢀ.
· B-Constant (B25/50°C) fluctuation rate: less than 1ꢀ.
-40°C +0/-3°C, 30 minutes in air
+25°C 2°C, 10 to 15 minutes in air
+125°C +3/-0°C, 30 minutes in air
+25°C +2/-0°C, 10 to 15 minutes in air (1 cycle)
Continuous 100 cycles, without loading.
Temperature
Cycle
5
6
2mm length of coating resin from the top of thermistor is to be
dipped into beads of lead (Pb), and DC100V 1 minute is applied
to circuit between beads of lead (Pb) and lead wire.
Insulation Break -
down Voltage
· No damage electrical characteristics on D.C.100 V, 1 min.
Both lead wires are dipped into 350 10°C solder for 3.5 0.5
seconds, or 260 5°C solder for 10 1 seconds according to
Fig-1. (solder <Sn-3Ag-0.5Cu>)
· Resistance (R25°C) fluctuation rate: less than 1ꢀ.
· B-Constant (B25/50°C) fluctuation rate: less than 1ꢀ.
Resistance to
Soldering Heat
7
Solder
Fig-1
Both lead wires are dipped into flux (25wtꢀ colophony
<JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10
seconds. Then both lead wires are dipped into 245 5°C solder
<Sn-3Ag-0.5Cu> for 2 0.5 seconds according to Fig-1.
· More than 90ꢀ of lead wire surface shall be covered by
solder.
8
9
Solderability
One end of a lead wire shall be fixed and 2.5N force for 10
seconds shall be applied to the other lead wire as shown in
Fig-2.
· Resistance(R25°C) fluctuation rate: less than 1ꢀ.
· B-Constant(B25/50°C) fluctuation rate: less than 1ꢀ.
· No visible damage at resin part.
Lead Wire Pull
Strength
6
2.5N (10sec.)
Fig-2
One lead wire is held and 2.5N force is applied. Then the body
of NTC thermistor is bent by 90° and again bent bacꢂ to the
initial position. This sequence shall be completed twice. See
Fig-3.
Lead Wire Bending
Strength
· Lead wire does not breaꢂ.
10
90°
2.5N
Fig-3
NTC thermistor shall be dropped without any force onto
concrete floor from 1 meter height one time.
11 Free Fall
12 Vibration
· Resistance (R25°C) fluctuation rate: less than 1ꢀ.
· B-Constant (B25/50°C) fluctuation rate: less than 1ꢀ.
· No visible damage at resin part.
NTC thermistor shall be fixed to the vibration test Equipment.
Vibration of total 1.5mm amplitude, Frequency sequence of
10Hz – 55Hz – 10Hz in 1 minute, shall be applied for right
angled 3 directions for 2 hours duration each.
* · R25 is zero-power resistance at 25°C.
· B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C.
· Aꢁer each test, NTC Thermistor should be ꢂept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
28
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Temperature Sensor Lead Insulation Type
4.0 max.
2.0 max.
This thermistor is for normal temperature level sensors
having self-subsistence due to strong lead strength
based on chip NTC.
A
Features
2.5±±.0
1. NXR series can accurately detect temperature with
NCP15 series on the head of parts.
B
2. The insulation coat with polyulethane on the surface of
lead wire : 100VDC.
0.46±0.05
3. You can choose NTC characteristics from NCP15 series.
4. The resistance drift is low in the reliability test.
5. The production capacity is bigger and NXR is produced
almost entirely in an automation line.
The full length 25.0 to 45.0mm interval 5.0mm
A: Epoxy Resin
B: Copper Lead Wire with Polyurethane Coat
(in mm)
6. Adopt to Sb regulation
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/nxr
Applications
1. Secondary battery
2. Temperature detection for charging
3. Temperature detection for DC fan motor
4. Temperature sensing for appliance
5. Self-standing temperature sensing for fire detector
Resistance B-Constant
B-Constant
(25-80°C)
B-Constant
(25-85°C)
B-Constant
(25-100°C)
Operating Current Rated Electric Typical Dissipation Thermal Time
Part Number
(25°C)
(ohm)
(25-50°C)
(K)
for Sensor (25°C) Power (25°C)
Constant (25°C)
(mW/°C)
Constant
(25°C) (s)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NXRT15XM202EA5B
NXRT15XV502FA5B
NXRT15XH103FA5B
NXRT15XV103FA5B
2k 3ꢀ
5k 1ꢀ
3500 1.5ꢀ
3936 1ꢀ
3380 1ꢀ
3936 1ꢀ
4050 3ꢀ
4050 1ꢀ
3539
3972
3428
3971
4101
4101
4303
3545
3977
3434
3977
4108
4108
4311
3560
3989
3455
3988
4131
4131
4334
0.36
13
2.6
2.6
2.6
2.6
2.6
2.6
2.6
4
4
4
4
4
4
4
ppp
0.22
0.16
0.16
0.08
0.07
0.05
13
13
13
13
13
13
ppp
ppp
ppp
10k 1ꢀ
10k 1ꢀ
33k 5ꢀ
47k 1ꢀ
NXRT15WB333JA5B
NXRT15WB473FA5B
NXRT15WF104FA5B
ppp
ppp
ppp
100k 1ꢀ 4250 1ꢀ
is fulled with Total-length codes. (25 to 35mm interval 5mm, ex. 030=30mm)
ppp
Operating Current for Sensor rises Thermistor's temperature by 0.1°C.
Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
7
29
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Lead Insulation Type Specifications and Test Methods
No.
Item
Specifications
Test Methods
Both lead wires are dipped into 350±±0°C solder for 3.5±0.5
seconds, or 260 ±5°C solder for ±0±± seconds according to
Fig-±. (solder <ꢅnAgCu>)
Resistance to
Soldering Heat
(Flow)
· Resistance (R25°C) fluctuation rate: less than ±±ꢁ.
· B-Constant (B25/50°C) fluctuation rate: less than ±±ꢁ.
1
ꢅolder
± to 2mm
Fig-±
Both lead wires are dipped into flux (25wtꢁ colophony
<JIꢅ K 5ꢀ02> isopropyl alcohol <JIꢅ K ꢃꢃ3ꢀ>) for 5 to ±0
seconds. Then both lead wire are dipped into 245±5°C solder
<ꢅnAgCu> for 2±0.5 seconds according to Fig-±.
· More than ꢀ0ꢁ of lead wsire surface shall be covered by
solder.
Solderability
(Flow)
2
3
‘ne end of a lead wire shall be fixed and 2.5N force for ±0
seconds shall be applied to the other lead wire as shown in
Fig-2.
· Resistance (R25°C) fluctuation rate: less than ±±ꢁ.
· B-Constant (B25/50°C) fluctuation rate: less than ±±ꢁ.
Lead Wire
Breaking Strength
2.5N (±0sec.)
Fig-2
‘ne lead wire is held and 2.5N force is applied. Then the body
of NTC thermistor is bent by ꢀ0° and again bent back to the
initial position. This sequence shall be completed twice. ꢅee
Fig-3.
Lead Wire Bending
Strength
· Lead wire does not break.
4
ꢀ0°
2.5N
Fig-3
NTC thermistor shall be dropped without any force onto
concrete floor from ± meter height one time.
5
6
Free Fall
Vibration
· Resistance (R25°C) fluctuation rate: less than ±±ꢁ.
· B-Constant (B25/50°C) fluctuation rate: less than ±±ꢁ.
· No visible damage at resin part.
NTC thermistor shall be fixed to the vibration test equipment.
Vibration of total ±.5 mm amplitude, frequency sequence of
±0ꢂz - 55ꢂz - ±0ꢂz in ± minute, shall be applied for right
angled 3 directions for 2 hours duration each.
7
-40 +0/-3°C in air, for ±000 +4ꢃ/-0 hours without loading.
±25±2°C in air, for ±000 +4ꢃ/-0 hours without loading.
7
8
Cold
· Resistance (R25°C) fluctuation rate: less than ±±ꢁ.
· B-Constant (B25/50°C) fluctuation rate: less than ±±ꢁ.
Dry Heat
High Temperature
with Continuous
Load
ꢃ5±2°C in air, with ꢄ‘perating Current for ꢅensorꢆ
for ±000 +4ꢃ/-0 hrs.
9
60±2°C, ꢀ0 to ꢀ5ꢁRꢂ in air, for ±000 +4ꢃ/-0 hours without
loading.
10 Damp Heat
· Resistance (R25°C) fluctuation rate: less than ±2ꢁ.
· B-Constant (B25/50°C) fluctuation rate: less than ±±ꢁ.
-40°C +0/-3°C, 30 minutes in air
+25°C±2°C, ±0 to ±5 minutes in air
+±25°C +3/-0°C, 30 minutes in air
+25°C +2/-0°C, ±0 to ±5 minutes in air (± cycle)
Continuous ±00 +4/-0 cycles, without loading.
Change of
11
Temperature
2mm length of coating resin from the top of thermistor is to be
dipped into beads of lead (Pb), and DC±00V ± minute is applied
to circuit between beads of lead (Pb) and lead wire.
Dielectric
12 Breakdown
Voltage
· No damage electrical characteristics on D.C.±00V, ± min.
30
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value)
Part Number NXFT15XH103 NXFT15XV103 NXFT15WB473 NXFT15WF104
Resistance
B-Constant
10kΩ
10kΩ
47kΩ
100kΩ
4250K
3380K
3936K
4050K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
–40
–35
–30
–25
–20
–15
–10
–5
197.388
149.395
114.345
88.381
68.915
54.166
42.889
34.196
27.445
22.165
18.010
14.720
12.099
10.000
8.309
337.503
243.332
177.496
130.859
97.428
73.230
55.529
42.467
32.747
25.450
19.932
15.727
12.498
10.000
8.054
4221.280
2995.040
2147.000
1554.600
1136.690
839.019
624.987
469.678
355.975
272.011
209.489
162.559
127.057
100.000
79.222
63.167
50.677
40.904
33.195
27.091
22.224
18.323
15.184
12.635
10.566
8.873
1690.590
1215.320
882.908
647.911
480.069
359.009
270.868
206.113
158.126
122.267
95.256
74.754
59.075
47.000
37.636
30.326
24.583
20.043
16.433
13.545
11.223
9.345
0
5
10
15
20
25
30
35
6.939
6.529
40
5.824
5.324
45
4.911
4.366
50
4.160
3.601
55
3.539
2.985
60
3.024
2.488
65
2.593
2.083
70
2.233
1.752
7.818
75
1.929
1.480
6.571
80
1.673
1.256
5.548
85
1.455
1.070
4.704
90
1.270
0.916
7.481
4.004
95
1.112
0.787
6.337
3.422
100
105
110
115
120
125
0.976
0.679
5.384
2.936
0.860
0.588
2.528
4.594
0.759
0.512
2.184
3.934
0.673
0.446
1.893
3.380
0.598
0.391
1.646
2.916
0.532
0.343
1.436
2.522
Part Number NXRT15XM202 NXRT15XV502 NXRT15XH103 NXRT15XV103
NXRT15WF104
100kΩ
NXRT15WB333 NXRT15WB473
Resistance
B-Constant
2.0kΩ
5.0kΩ
10kΩ
10kΩ
33kΩ
47kΩ
3500K
3936K
3380K
3936K
4050K
4050K
4250K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ)
4397.119
3088.599
2197.225
1581.881
1151.037
846.579
628.988
471.632
357.012
272.500
209.710
162.651
127.080
100.000
79.222
Resistance (kΩ) Resistance (kΩ)
–40
–35
–30
–25
–20
–15
–10
–5
44.981
33.671
25.444
19.417
14.955
11.619
9.097
7.178
5.707
4.568
3.682
2.986
2.437
2.000
1.651
1.370
1.143
0.958
0.807
0.682
0.580
0.495
0.424
0.365
0.315
0.273
0.237
0.207
0.181
0.160
0.141
0.124
0.110
0.098
195.652
148.171
113.347
87.559
68.237
53.650
42.506
33.892
27.219
22.021
17.926
14.674
12.081
10.000
8.315
337.503
243.332
177.496
130.859
97.428
73.230
55.529
42.467
32.747
25.450
19.932
15.727
12.498
10.000
8.054
168.752
121.666
88.748
65.430
48.714
36.615
27.764
21.233
16.374
12.725
9.966
7.864
6.249
5.000
4.027
3.264
2.662
2.183
1.801
1.493
1.244
1.041
0.876
0.740
0.628
0.535
0.458
0.394
0.340
0.294
0.256
0.223
0.195
0.172
1227.263
874.449
630.851
460.457
339.797
253.363
190.766
144.964
111.087
85.842
66.861
52.470
41.471
33.000
26.430
21.298
17.266
14.076
11.538
9.506
1747.920
1245.428
898.485
655.802
483.954
360.850
271.697
206.463
158.214
122.259
95.227
74.730
59.065
47.000
37.643
30.334
24.591
20.048
16.433
13.539
11.209
9.328
0
5
10
15
20
25
30
35
6.948
6.529
63.167
40
5.834
5.324
50.677
45
4.917
4.366
40.904
50
4.161
3.601
33.195
55
3.535
2.985
27.091
60
3.014
2.488
7.870
22.224
65
2.586
2.083
6.549
18.323
70
2.228
1.752
5.475
7.798
15.184
75
1.925
1.480
4.595
6.544
12.635
80
1.669
1.256
3.874
5.518
10.566
85
1.452
1.070
3.282
4.674
8.873
90
1.268
0.916
2.789
3.972
7.481
95
1.110
0.787
2.379
3.388
6.337
100
105
110
115
120
125
0.974
0.679
2.038
2.902
5.384
0.858
0.588
1.751
4.594
2.494
0.758
0.512
1.509
3.934
2.150
0.672
0.446
1.306
3.380
1.860
0.596
0.391
1.134
2.916
1.615
0.531
0.343
0.987
2.522
1.406
31
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
Note
R44E.pdf
Oct.6,2016
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Thermo String/Lead Type Caution/Notice
!
Caution (Storage and Operating Conditions)
!
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because
all of these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
2. Volatile or flammable gas
3. Dusty conditions
4. Under vacuum, or under high or low pressure
5. Wet or humid locations
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
8. Other places where similar hazardous conditions
exist
Caution (Others)
!
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damage that may be
caused by the abnormal function or the failure of our
product.
Notice (Storage and Operating Conditions)
To keep the solderability of the product from degrading,
the following storage condition is recommended.
1. Storage condition:
3. Handling after unpacking:
After unpacking, reseal product promptly or
store it in a sealed container with a drying agent.
4. Storage place:
Temperature -10 to +40°C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
Notice (Soldering and Mounting) NXF Series
Please note as shown below when you mount this product.
1. Do not melt the solder in the resin head when you solder
this product. If you do so, there is a possibility of wire
breakage, electric short mode failure and wire coating
breakage. If you cut the lead wire of this product less
than 20mm from the resin head, the heat of the melted
solder at the lead wire edge is propagated easily to the
resin head along the lead wire.
2. Do not touch the resin head directly with the soldering
iron. It may cause the melting of solder in the resin head.
3. Do not separate the parallel lead wires 10mm or less
from the resin.
4. If you mold this product with resin, please evaluate
the quality of this product before you use it.
5. Do not bend the lead wire radius 1mm or more.
Continued on the following page.
32
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
Note
R44E.pdf
Oct.6,2016
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Thermo String/Lead Type Caution/Notice
!
Continued from the preceding page.
Notice (Soldering and Mounting) NXR Series
Please note as shown below when you mount this product.
1. Do not melt the solder in the resin head, when you solder
this product. If you melt the solder in resin the head,
the wire could break and short.
2. Do not touch the resin head directly with the solder iron.
It may cause the melting of solder in the resin head.
3. If you mold this product with resin, please evaluate
the quality of this product before you use it.
If you cut the lead wire of this product less than 8mm
from the resin head, the heat of the melted solder at the
lead wire edge is propagated easily to the resin head
along the lead wire. Please do not cut this product below
9mm.
Notice (Soldering and Mounting) NXR Series (Insulation Type)
Please note as shown below when you mount this product.
1. Do not melt the solder in the resin head when you solder
this product. (more than 25mm in full length of the
product).
If you melt the solder in the resin head, it has posibility
that the wire could break and short.
Please talk to us if you have concern matter, like
process it under the high temperature and the high
pressure.
(For example, exposed to high-temperature and
high-pressure environment as mold sealing with
injection molding.)
2. Do not touch the resin head directly with the solder iron.
It may cause the melting of solder in the resin head.
3. When additonal processing is carried out on this product
(such as bonding, resin molding, and resin coating, etc.),
please perform an audit of quality level on an automated
machine and only use the product after confirming its
reliability.
Notice (Handling) NXF/NXR Series
1. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to cause a shock at handling.
Such forces may cause cracking or chipping.
2. Do not apply excessive force to the lead.
Otherwise, it may cause the junction between lead and
element to break or crack. Holding the element by the
side lead wire is recommended when lead wire is bent
or cut.
Notice (Handling) NXR Series (Insulation Type)
1. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to cause a shock at handling.
Such forces may cause cracking or chipping.
Especially under high-temperature environment,
there is a possibility that epoxy resin will become soft.
When you set up the processing environment, please
examine the processing method after evaluating the
quality of this product.
2. Do not apply excessive force to the lead.
Otherwise, it may cause the junction between lead and
element to break or crack.
Holding the element by the side lead wire is recommended
when lead wire is bent or cut.
Handle the lead with care; there is a possibility
that a crack may go into the polyurethane
insulated coat when bending the lead.
33
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Sensor Thermo String/Lead Type Package
Minimum Order Quantity
Bulk
Ammo Pack Taping
Part Number Minimum Quantity (pcs.)
Part Number
NXF
Minimum Quantity (pcs.)
1000
500
-
-
NXR
NXRT_3A016
2500
Taping Dimensions (NXRT_3A016 Series)
Δh1
Δh2
P2
P
ΔS
T
D
F
ød
P1
øD0
P0
Item
Code
P
Dimensions (mm)
12.7 1.0
12.7 0.3
5.0 1.0
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
P0
F
Length from Hole Center to Component Center
Length from Hole Center to Lead
Body Diameter
P2
6.35 1.3
3.85 0.7
4.0 max.
0 2.0
P1
D
Deviation Along Tape, Leꢀ or Right
Carrier Tape Width
ΔS
W3
W1
H0
H3
I
18.0 0.5
9.0 0.5
Position of Sprocket Hole
Lead Distance between Reference and Bottom Planes
Height of Component
16.0 1.0
7.5 1.0
Protrusion Length
+0.5 to −1.0
4.0 0.1
Diameter of Sprocket Hole
Lead Diameter
øD0
ød
0.40 0.05
0.6 0.3
Total Tape Thickness
t1
Total Thickness, Tape and Lead Wire
Deviation Across Tape
t2
1.6 max.
Δh1, Δh2
L3
1.0 max.
+0
Portion to Cut in Case of Defect
Hold down Tape Width
11.0
–2.0
W0
W2
T
9.5 min.
1.5 1.5
2.0 max.
Hold down Tape Position
Thickness
34
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,20±6
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Inrush Current Suppression Lead Type
NTPAN : 23.0 max.
NTPAJ : 20.0 max.
This product effectively supresses surge currents
that are generated when switching power regulators
are turned on.
5.5 max.
Features
Coating Extension
on Lead : to line A
A
±. Lead is not contained in the ceramic element, the
terminations, the solder for inner connection and
the coating resin.
2. Most suitable for power supplies of less than ±00W
3. Excellent recovery characteristics due to resin
coating with excellent heat characteristics
4. Highly reliable
ø0.8 0.05
Sn plated Cu wire
NTPAN/NTPAJ Series
10.0 1.5
(in mm)
NTPAD : 16.0 max.
NTPAA : 12.0 max.
5.5 max.
5.0 max.
Applications
±. Switching power supplies
2. CRT monitors
3. Color televisions
4. VCR power supplies
1. Other power circuits
Coating Extension
on Lead : to line A
A
ø0.8 0.05
Sn plated Cu wire
NTPAD/NTPAA Series
7.5 1.5
(in mm)
NTPA9: 11.0 max.
NTPA7: 9.0 max.
NTPA5: 6.0 max.
5.0 max.
Coating Extension
on Lead: to line A
A
ø0.6 0.05
Sn plated Cu wire
NTPA5/NTPA7/NTPA9
Series
5.0 1.5
(in mm)
Detailed are accessable from the following URL.
http://www.murata.com/en-global/products/thermistor/ntc/ntp
Resistance
(25°C)
Permissible Max.
Current (25°C)
(A)
Permissible Max.
Current (55°C)
(A)
Thermal Time
Constant (25°C)
(s)
Thermal Dissipation
Constant (25°C)
(mW/°C)
8
Part Number
(ohm)
NTPAN3R0LDKB0
NTPAN4R0LDKB0
NTPAN6R0LDKB0
NTPAJ4R0LDKB0
NTPAJ6R0LDKB0
NTPAJ8R0LDKB0
NTPAJ100LDKB0
3.0 ±±15
4.0 ±±15
6.0 ±±15
4.0 ±±15
6.0 ±±15
8.0 ±±15
±0.0 ±±15
1.4
4.7
3.9
4.0
3.4
3.0
2.6
4.7
4.±
3.4
3.1
2.9
2.6
2.2
±31
±30
±30
±21
±21
±30
±30
26.8
26.8
26.8
2±.8
2±.8
2±.8
2±.8
Continued on the following page.
31
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,20±6
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Resistance
Permissible Max.
Current (25°C)
(A)
Permissible Max.
Current (55°C)
(A)
Thermal Time
Constant (25°C)
(s)
Thermal Dissipation
Constant (25°C)
(mW/°C)
Part Number
(25°C)
(ohm)
NTPAD3R9LDNB0
NTPAD5R1LDNB0
NTPAD8R0LDNB0
NTPAD160LDNB0
NTPAA2R2LDNB0
NTPAA3R9LDNB0
NTPAA5R1LDNB0
NTPAA8R2LDNB0
NTPAA100LDNB0
NTPA9160LBMB0
NTPA74R0LBMB0
NTPA75R0LBMB0
NTPA78R0LBMB0
NTPA7100LBMB0
NTPA7160LBMB0
NTPA7220LBMB0
NTPA55R0LBMB0
NTPA5100LBMB0
3.9 ±±15
1.± ±±15
8.0 ±±15
±6.0 ±±15
2.2 ±±15
3.9 ±±15
1.± ±±15
8.2 ±±15
±0.0 ±±15
±6.0 ±±15
4.0 ±±15
1.0 ±±15
8.0 ±±15
±0.0 ±±15
±6.0 ±±15
22.0 ±±15
1.0 ±±15
±0.0 ±±15
3.3
3.0
2.7
2.0
3.7
2.7
2.1
2.0
±.7
±.4
2.3
±.9
±.7
±.4
±.2
±.0
±.7
±.2
2.9
2.6
2.3
±.7
3.2
2.3
2.2
±.7
±.1
±.2
2.0
±.6
±.1
±.2
±.0
0.88
±.1
±.±
61
81
61
±00
70
70
70
70
70
61
40
40
40
40
40
40
20
20
±8.2
±8.8
±8.7
±9.±
±3.1
±3.1
±3.1
±3.1
±3.1
±±.6
9.4
9.4
9.1
9.1
9.9
9.±
1.6
1.6
NTPAD/NTPAA/NTPA9/NTPA7 series are also available on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B±A0".
Operating Temperature Range: -20°C to +±60°C
Permissible Electrolytic Capacitor
Voltage (AC)
100Vrms
120Vrms
132Vrms
220Vrms
240Vrms
264Vrms
Part Number
NTPAN
8600μF
5000μF
2700μF
1400μF
800μF
5972μF
3472μF
1875μF
972μF
4936μF
2870μF
1550μF
803μF
1777μF
1033μF
558μF
289μF
165μF
1493μF
868μF
469μF
243μF
139μF
1234μF
717μF
387μF
201μF
115μF
NTPAJ
NTPAD
NTPAA
NTPA9
556μF
459μF
NTPA74R0
NTPA75R0
NTPA78R0
NTPA7100
NTPA7160
NTPA7220
NTPA5
700μF
570μF
486μF
396μF
402μF
327μF
145μF
118μF
122μF
99μF
100μF
82μF
400μF
346μF
278μF
240μF
230μF
198μF
83μF
71μF
69μF
60μF
57μF
50μF
Application Circuit
Determination of Allowable Current
1.0
NTC
–t°
+
0.5
–
8
0
20
40
60
80
100
120
140
160
Ambient Temperature (°C)
36
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical)
NTPAN3R0L Type
NTPAN4R0L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
10
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
0.1
0.1
0.01
0.01
1
0.01
0.01
1
0.1
0.1
0.1
0.1
1
10
0.1
0.1
0.1
0.1
1
10
Current (A)
Current (A)
NTPAN6R0L Type
NTPAJ4R0L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
10
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
0.1
0.1
0.01
0.01
1
0.01
0.01
1
1
10
1
10
Current (A)
Current (A)
NTPAJ6R0L Type
NTPAJ8R0L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
10
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
0.1
0.1
0.01
0.01
1
0.01
0.01
1
1
10
1
10
Current (A)
Current (A)
NTPAJ100L Type
NTPAD3R9L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
10
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
8
1
1
0.1
0.1
0.01
0.01
1
0.01
0.01
1
1
10
1
10
Current (A)
Current (A)
Continued on the following page.
37
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical)
Continued from the preceding page.
NTPAD5R1L Type
NTPAD8R0L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
10
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
0.1
1
0.1
0.01
1
0.01
0.01
1
0.01
0.1
0.1
0.1
0.1
1
10
0.1
0.1
0.1
0.1
1
10
Current (A)
Current (A)
NTPAD160L Type
NTPAA2R2L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
10
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
0.1
0.1
0.01
0.01
1
0.01
0.01
1
1
10
1
10
Current (A)
Current (A)
NTPAA3R9L Type
NTPAA5R1L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
10
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
0.1
0.1
0.01
0.01
1
0.01
0.01
1
1
10
1
10
Current (A)
Current (A)
NTPAA8R2L Type
NTPAA100L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
8
1
1
0.1
0.1
10
1
0.01
0.01
1
0.01
0.01
1
10
1
10
Current (A)
Current (A)
Continued on the following page.
38
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical)
Continued from the preceding page.
NTPA9160L Type
NTPA74R0L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
100
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
0.1
0.1
10
1
0.01
0.01
1
0.01
0.01
0.1
0.1
0.1
0.1
1
10
0.1
0.1
0.1
0.1
1
10
Current (A)
Current (A)
NTPA75R0L Type
NTPA78R0L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
100
10
1
0.1
0.1
0.01
0.01
0.01
0.01
1
1
10
1
10
Current (A)
Current (A)
NTPA7100L Type
NTPA7160L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
1
1
100
10
1
0.1
0.1
0.01
0.01
0.01
0.01
1
1
10
1
10
Current (A)
Current (A)
NTPA7220L Type
NTPA55R0L Type
Ta=25°C
Ta=25°C
10
1000
100
10
10
1000
Resistance Ratio
Thermistor's Temperature (°C)
Resistance Ratio
Thermistor's Temperature (°C)
8
1
1
100
10
1
0.1
0.1
0.01
0.01
1
0.01
0.01
1
10
1
10
Current (A)
Current (A)
Continued on the following page.
39
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current-R Ratio (RT/R25)/Current-Temperature Characteristics (Typical)
Continued from the preceding page.
NTPA5100L Type
Ta=25°C
10
1000
Resistance Ratio
Thermistor's Temperature (°C)
1
100
10
1
0.1
0.01
0.01
0.1
1
10
Current (A)
8
40
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
Note
R44E.pdf
Oct.6,2016
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Inrush Current Suppression Lead Type Caution/Notice
!
Caution (Storage and Operating Conditions)
!
1. This product is designed for Switching Power Supplies
with smoothing capacitors.
Do not use under the following conditions because
all these factors can deteriorate the
product characteristics cause failure and burn-out.
(1) Corrosive gas or deoxidizing gas.
(Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) Volatile or flammable gas
Other applications of this product may result in fire.
2. Use this product within the specified maximum current.
Otherwise it may catch fire in the worst case.
3. Use this product with smoothing capacitors within
the specified maximum capacitance value. Otherwise
it may catch fire in the worst case.
(3) Dusty conditions
4. This product is designed for application in an
ordinary environment
(4) Under high or low pressure
(5) Wet or humid conditions
(normal room temperature, humidity and atmospheric
pressure).
(6) Near with salt water, oils, chemical liquids or
organic solvents
(7) Strong vibrations
(8) Other places where similar hazardous conditions
exist.
Caution (Others)
!
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damage that may be
caused by the abnormal function or the failure of our
product.
Notice (Storage and Operating Conditions)
To keep the solderability of the product from degrading,
the following storage condition is recommended.
1. Storage condition:
3. Handling after unpacking:
After unpacking, reseal product promptly or
store it in a sealed container with a drying agent.
4. Storage place:
Temperature -10 to +40°C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
Notice (Soldering and Mounting)
8
1. Be sure that the preheat-up does not melt the
soldering of this product. Excessive heat may
cause failure to open, short or insulation break
down.
2. Do not touch the body with the soldering iron.
The soldering point should be min. 5mm away from
the root of the lead wire.
41
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
Note
R44E.pdf
Oct.6,2016
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Inrush Current Suppression Lead Type Caution/Notice
!
Notice (Handling)
1. When this product is operated, the temperature of
some areas may be about 160°C.
3. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to cause a shock at handling.
Such forces may cause cracking or chipping to the
element.
4. Do not apply excessive force to the lead wire.
Otherwise, it may cause the junction between lead
wire and element to break or crack, or may crack the
element.
Use proper surrounding parts and material that
withstand such temperature. If they are inadequate
and kept at high temperature for a long time, they
may be deteriorated or may produce harmful gas.
Such harmful gas may deteriorate the element of
this product.
2. This product does not have waterproof construction.
Splashed water may cause failure mode such as
deterioration of characteristics or current leak.
Therefore, do not apply clean by immersing it into
water or any solvent.
Therefore, fix the lead wire of the element side when
the lead wire is bent or cut.
Notice (Others)
1. This product may allow the passing of higher current
than its initial value if it receives inrush current again
before it cools down enough to recover its original
resistance.
Be sure to consider the highest current under actual
operating conditions operating temperature.
2. The resin coating of this product does not
guarantee insulating. Keep an adequate insulating
distance from surrounding parts.
8
42
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Inrush Current Suppression Lead Type Package
Minimum Order Quantity
Bulk
Ammo Pack Taping
Part Number Minimum Quantity (pcs.)
Part Number
NTPAN_DKB0
NTPAJ_DKB0
NTPAD_DNB0
NTPAA_DNB0
NTPA9_BMB0
NTPA7_BMB0
NTPA5_BMB0
Minimum Quantity (pcs.)
50
-
-
100
150
300
300
500
500
-
-
NTPAD_D6A0
NTPAA_D6A0
NTPA9_B1A0
NTPA7_B1A0
NTPA5_B1A0
400
750
1000
1000
1500
Taping Dimensions (NTPAD/A_D6A0 Series)
ΔS
P2
P
Δh1
Δh2
T
D
A
P1
F
d
P0
Item
Pitch of Component
Code
Dimensions (mm)
30.0
P
P0
F
Pitch of Sprocket Hole
15.0 0.3
Lead Spacing
7.5 0.5
Length from Hole Center to Component Center
Length from Hole Center to Lead
Body Diameter
P2
P1
D
7.5 1.5
3.75 1.0
(refer to the table below)
(refer to the table below)
2.0
Body Thickness
T
Deviation Along Tape, Leꢀ or ꢁight
Carrier Tape Width
ΔS
W
18.0 0.5
Position of Sprocket Hole
Lead Distance between ꢁeference and Bottom Plane
Height of Component
W1
H0
H2
I
9.0 0.5
16.0 0.5
10.0 max.
+0.5 to -6.0
4.0 0.1
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
D0
d
0.8 0.05
Total Tape Thickness
t1
0.6 0.3
Total Thickness, Tape and Lead Wire
Deviation Across Tape
t2
2.0 max.
Δh1, Δh2
L
2.0 max.
+0
Portion to Cut in Case of Defect
Hold down Tape Width
11.0
–2.0
W0
W2
e
11.5 min.
4.0 max.
to line A
Hold down Tape Position
Coating Extension on Lead
8
Type
NTPAD
NTPAA
D (mm)
16.0 max.
12.0 max.
T (mm)
5.5 max.
5.0 max.
Continued on the following page.
43
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
R44E.pdf
Oct.6,2016
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Inrush Current Suppression Lead Type Package
Continued from the preceding page.
Taping Dimensions (NTPA9/7/5_B1A0 Series)
ΔS
P2
P
Δh1
Δh2
T
D
A
P1
F
d
P0
Type
NTPA9
D (mm)
11.0 max.
9.0 max.
6.0 max.
NTPA7
NTPA5
8
44
R44E.pdf
Oct.6,2016
Cat. No. R44E-17
Global Locations
For details please visit www.murata.com
Note
1 Export Control
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
3 Product specifications in this catalog are as of
August 2016. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
1
2
3
4
5
6
Aircraf equipment
Aerospace equipment
Undersea equipment
Power plant equipment
Medical equipment
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
Transportation equipment (vehicles, trains,
ships, etc.)
7
8
Traffic signal equipment
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10 Application oꢀ similar complexity and/or
reliability requirements to the applications
listed above
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Murata Manufacturing Co., Ltd.
www.murata.com
相关型号:
©2020 ICPDF网 联系我们和版权申明