NKA1209SC [MURATA]
Isolated Sub-Miniature 1W Dual Output DC/DC Converters; 孤立的超小型1W双输出DC / DC转换器型号: | NKA1209SC |
厂家: | muRata |
描述: | Isolated Sub-Miniature 1W Dual Output DC/DC Converters |
文件: | 总4页 (文件大小:150K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NKA Series
Isolated Sub-Miniature 1W Dual Output DC/DC Converters
SELECTION GUIDE
Nominal
Input
Output
Voltage
Output
Current
Isolation
Capacitance
Input
Current at Efficiency
Rated Load
MTTF1
Package
Style
Order Code
Voltage
V
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
5
V
3.3
5
mA
152
100
56
mA
407
383
402
390
384
407
383
402
390
384
259
285
249
263
255
253
259
285
249
263
255
253
112
106
104
102
112
106
104
102
%
74
79
75
78
79
74
79
75
78
79
77
70
80
76
78
79
77
70
80
76
78
79
74
79
81
82
74
79
81
82
pF
20
22
30
31
32
20
22
30
31
32
22
21
26
25
28
29
22
21
26
25
28
29
33
48
55
60
33
48
55
60
kHrs
195
1121
1035
375
206
195
1121
1035
375
206
205
1697
1557
682
343
188
205
1697
1557
682
343
188
559
375
243
154
559
375
243
154
NKA0303DC
NKA0305DC
NKA0309DC
NKA0312DC
NKA0315DC
NKA0303SC
NKA0305SC
NKA0309SC
NKA0312SC
NKA0315SC
NKA0503DC
NKA0505DC
NKA0505DEC
NKA0509DC
NKA0512DC
NKA0515DC
NKA0503SC
NKA0505SC
NKA0505SEC
NKA0509SC
NKA0512SC
NKA0515SC
NKA1205DC
NKA1209DC
NKA1212DC
NKA1215DC
NKA1205SC
NKA1209SC
NKA1212SC
NKA1215SC
9
DIP
SIP
12
15
3.3
5
42
33
152
100
56
9
12
15
3.3
5
42
FEATURES
ꢀRoHS compliant
33
152
100
100
56
5
ꢀEfficiency up to 82%
5
5
DIP
SIP
5
9
ꢀWide temperature performance at full
1 Watt load, –40°C to 85°C
5
12
15
3.3
5
42
5
33
ꢀUL 94V-0 package material
ꢀReduced footprint at 0.98cm2
ꢀIndustry standard pinout
5
152
100
100
56
5
5
5
5
9
ꢀPower sharing on output
5
12
15
5
42
5
33
ꢀ3.3V, 5V & 12V Input
12
12
12
12
12
12
12
12
100
56
ꢀ3.3V, 5V, 9V, 12V and 15V output
ꢀInternal SMD construction
9
DIP
SIP
12
15
5
42
33
ꢀFully encapsulated with toroidal magnetics
ꢀNo external components required
ꢀMTTF up to 1.6 Million hours
ꢀNo electrolytic or tantalum capacitors
100
56
9
12
15
42
33
When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external
capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the
additional external capacitance for reliable start up.
NKA0505DEC/NKA0505SEC offer higher efficiency than NKA0505SC/NKA0505DC but over a narrower operating temperature range.
See temperature characteristics graph.
DESCRIPTION
The NKA sub-miniature series of industrial
INPUT CHARACTERISTICS
temperature range DC/DC converters are the
standard building blocks for on-board distributed
power systems. The series offers smaller package
size, improved efficiency, lower output ripple and
3kVDC isolation capability through the use of state
of the art packaging and technology. Ideally suited
for providing dual rail supplies on primarily digital
boards with the added benefit of galvanic isolation
to reduce switching noise.
Parameter
Conditions
Min.
2.97
4.5
Typ.
3.3
5
Max.
3.63
5.5
Units
V
Continuous operation, 3.3V input types
Continuous operation, 5V input types
Continuous operation, 12V input types
3.3V input types
Voltage range
10.8
12
30
20
13.2
60
Reflected ripple current
mA p-p
All other types
35
ABSOLUTE MAXIMUM RATINGS
Short-circuit protection2
1 second
300°C
550mW
5.5V
All of the rated power may be drawn from a single
pin provided the total load does not exceed 1 watt.
Lead temperature 1.5mm from case for 10 seconds
Internal power dissipation
Input voltage VIN, NKA03 types
Input voltage VIN, NKA05 types
Input voltage VIN, NKA12 types
7V
15V
For full details go to
www.murata-ps.com/rohs
1. Calculated using MIL-HDBK-217F with nominal input voltage at full load.
2. Supply voltage must be discontinued at the end of the short circuit duration.
All specifications typical at T =25°C, nominal input voltage and rated output current unless otherwise specified.
A
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NKAC.I02 Page 1 of 4
NKA Series
Isolated Sub-Miniature 1W Dual Output DC/DC Converters
OUTPUT CHARACTERISTICS
Parameter
Rated Power1
Conditions
TA=-40°C to 120°C
Min.
Typ.
Max.
1
Units
W
Voltage Set Point Accuracy
Line regulation
See tolerance envelope
High VIN to low VIN
1.0
8
1.2
14
15
12
8
%/%
10% load to rated load, 0312 & 0315
10% load to rated load, 3.3V output types
10% load to rated load, 5V output types
10% load to rated load, 9V output types
10% load to rated load, 12V output types
10% load to rated load, 15V output types
BW=DC to 20MHz, 0312 & 0315
BW=DC to 20MHz, 3.3V output types
BW=DC to 20MHz, 5V output types
BW=DC to 20MHz, 9V output types
BW=DC to 20MHz, 12V output types
BW=DC to 20MHz, 15V output types
10
10
6.5
6
Load Regulation2
Ripple and Noise
%
8.5
7
6
25
40
50
40
40
40
60
80
75
65
60
60
mV p-p
ISOLATION CHARACTERISTICS
Parameter
Isolation test voltage
Resistance
Conditions
Flash tested for 1 second
Viso= 1000VDC
Min.
3000
Typ.
10
Max.
Max.
Units
VDC
GΩ
GENERAL CHARACTERISTICS
Parameter
Conditions
0303, 0305, 0312, 0315, 0503 and 0505XE
All other types
Min.
Typ.
95
Units
kHz
Switching frequency
120
TEMPERATURE CHARACTERISTICS
Parameter
Specification
Storage
Conditions
All output types
Min.
-40
Typ.
Max.
85
Units
°C
-50
130
5V output types
30
21
Case temperature rise above
ambient
All other output types
Free air convection
Cooling
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage,
applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions NKA series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 second.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
For a part holding no specific agency approvals, such as the NKA series, both input and output should normally be maintained within SELV limits i.e. less than 42.4V peak, or
60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system. The part
could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier; but then the circuitry on both sides of the barrier must
be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according to
safety standard requirements.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials,
construction and environment. The NKA series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While
parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically
polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We
therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage.
This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further
insulation system of physical spacing or barriers.
1. See Derating Graphs.
2. 12V input types have typically 3% less load regulation.
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NKAC.I02 Page 2 of 4
NKA Series
Isolated Sub-Miniature 1W Dual Output DC/DC Converters
TEMPERATURE DERATING GRAPHS
NKA0303DC/SC, 0305DC/SC
0309DC/SC, 0505DEC/SEC
types only.
1.5
1.5
1.0
All other types.
85°C
85°C
1.0
0.5 Safe Operating Area
0
0.5 Safe Operating Area
120°C
150
0
-40
100
150
0
50
-40
100
0
50
Ambient Temperature (°C)
Ambient Temperature (°C)
TOLERANCE ENVELOPES
3.3V output types.
+9%
All other types.
+10%
+5%
VNOM
+2.5%
+1%
VNOM
+1%
-7%
-2.5%
-7.5%
-7%
-15%
100
75
100
10 25
50
75
Output Load Current (%)
10 25
50
Output Load Current (%)
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS - 14 PIN DIP
Pin
1
Function
-VIN
0.768 (19.50)
0.652 (16.55)
7
NC
0.234 (5.95)
8
OV
0.386 (9.80)
9
+VOUT
-VOUT
+VIN
NKA0505DC
XYYWW
11
14
PIN CONNECTIONS - 6 PIN SIP
Pin
1
Function
+VIN
0.297
(7.55)
0.213 (5.40)
NKA0515SC
XYYWW
2
-VIN
0.024 (0.60)
0.020 (0.50)
0.181 (4.60)
0.142 (3.60)
4
-VOUT
OV
0.181 (4.60)
0.142 (3.60)
1
2
4
5
6
0.0196 0.00196 (0.50 0.05)
5
6
+VOUT
0.10 (2.54)
0.600 (15.24)
0.066 0.02
(1.675 0.50)
0.0196 0.00196 (0.50 0.05)
1
7
8
0.043 (1.09)
0.300 (7.62)
14
11
9
0.012(0.30)
0.008(0.20)
0.012 (0.30)
0.008 (0.20)
0.049
(1.25)
0.10 (2.54)
0.084 (2.13)
0.50(12.70)
All dimensions in inches 0.01 (mm 0.25mm). All pins on a 0.1 (2.54) pitch and within 0.01 (0.25) of true position.
Weight: 1.4g (SIP) 1.9g (DIP)
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NKAC.I02 Page 3 of 4
NKA Series
Isolated Sub-Miniature 1W Dual Output DC/DC Converters
PACKAGE SPECIFICATIONS (continued)
RECOMMENDED FOOTPRINT DETAILS
14 Pin DIP Package
6 Pin SIP Package
0.0453 (1.00)
0.0394 (1.15)
0.0453 (1.00)
Ø
Ø
6 HOLES
5 HOLES
Ø0.1
Ø0.1
0.0394 (1.15)
0.1 (2.54)
0.1 (2.54)
0.1 (2.54)
0.1 (2.54)
TUBE OUTLINE DIMENSIONS
14 Pin DIP Tube
6 Pin SIP Tube
ꢀꢁꢌꢀꢌꢅꢆꢄꢁꢄꢀꢉꢅ
ꢀꢁꢂꢃꢄꢅꢆꢇꢇꢁꢈꢀꢅꢉ
ꢀꢁꢋꢇꢌꢅꢆꢃꢁꢂꢀꢉ
ꢀꢁꢇꢊꢄꢅꢆꢃꢁꢀꢀꢉ
ꢀꢁꢀꢋꢌꢈꢀꢁꢀꢀꢈꢅꢆꢀꢁꢈꢀꢀꢁꢇꢃꢉꢅ
Unless otherwise stated all dimensions in inches (mm) 0.5mm.
Tube length (14 Pin DIP) : 20.47 (520mm 2mm).
Tube length (6 Pin SIP) : 20.67 (525mm 2mm).
ꢀꢁꢇꢄꢃꢅꢆꢂꢁꢂꢃꢉꢅ
DIP Tube Quantity : 25
SIP Tube Quantity : 30
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination
finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate.
Both types in this series are backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs
USA:
Canada: Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com
UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com
Tucson (Az), Tel: (800) 547 2537, email: sales@murata-ps.com
Murata Power Solutions, Inc.
France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com
Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED
Japan: Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com
Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com
Website: www.murata-ps.jp
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
China:
Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com
Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com
notice.
© 2008 Murata Power Solutions, Inc.
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KDC_NKAC.I02 Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明