NTPAJ6R0LDKB0 [MURATA]
NTC Thermistors; NTC热敏电阻型号: | NTPAJ6R0LDKB0 |
厂家: | muRata |
描述: | NTC Thermistors |
文件: | 总47页 (文件大小:1387K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Feb.21,2011
!Note
R44E.pdf
NTC Thermistors
Cat.No.R44E-13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Feb.21,2011
!Note
R44E.pdf
EU RoHS Compliant
•
All the products in this catalog comply with EU RoHS.
•
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
•
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
R44E.pdf
Feb.21,2011
1
2
3
4
5
6
7
8
CONTENTS
Part Numbering
Basic Characteristics
2
6
1
2
3
4
Temperature Sensor and Compensation 0201 (0603) Size
Temperature Sensor and Compensation 0402 (1005) Size
Temperature Sensor and Compensation 0603 (1608) Size
Temperature Sensor and Compensation 0805 (2012) Size
7
8
10
12
13
14
18
22
25
26
28
29
31
32
34
35
37
41
43
Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions
Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Temp. Sensor and Compensation Chip Type !Caution/Notice
Temp. Sensor and Compensation Chip Type Package
5
Temperature Sensor Thermo String Type
Temperature Sensor Thermo String Type Specifications and Test Methods
Temperature Sensor Lead Type
6
7
Temperature Sensor Lead Insulation Type
Temperature Sensor Temperature Characteristics (Center Value)
Temperature Sensor Thermo String Type/Lead Type !Caution/Notice
Temperature Sensor Thermo String Type/Lead Type Package
8
Inrush Current Suppression Lead Type
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Inrush Current Suppression Lead Type !Caution/Notice
Inrush Current Suppression Lead Type Package
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
o Part Numbering
NTC Thermistors for Temp. Sensor and Compensation Chip Type
(Part Number)
03 RB
NC
P
18 XH 103
J
q
w
e
r
t
y
u
i
qProduct ID
tResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures.
Product ID
NC
NTC Thermistors Chip Type
wSeries
Ex.
Code
102
Resistance
1kΩ
Code
Series
P
103
10kΩ
Plated Termination Series
104
100kΩ
eDimensions (LgW)
yResistance Tolerance
Code
03
Dimensions (LgW)
0.60g0.30mm
1.00g0.50mm
1.60g0.80mm
2.00g1.25mm
EIA
Code
Resistance Tolerance
0201
0402
0603
0805
15
D
E
F
J
±0.5%
±3%
18
21
±1%
±5%
rTemperature Characteristics
uIndividual Specifications
Code
WB
WD
WF
WL
WM
XC
Temperature Characteristics
Structures and others are expressed by two figures.
Nominal B-Constant 4050e4099K
Nominal B-Constant 4150e4199K
Nominal B-Constant 4250e4299K
Nominal B-Constant 4450e4499K
Nominal B-Constant 4500e4549K
Nominal B-Constant 3100e3149K
Nominal B-Constant 3250e3299K
Nominal B-Constant 3350e3399K
Nominal B-Constant 3500e3549K
Nominal B-Constant 3650e3699K
Nominal B-Constant 3900e3949K
Nominal B-Constant 3950e3999K
Ex.
Individual Specifications
Code
Standard Type
03
iPackaging
Code
RA
Packaging
XF
Plastic Taping 4mm Pitch
XH
RB
Paper Taping 4mm Pitch
XM
XQ
XV
RC
Paper Taping 2mm Pitch (10000 pcs.)
Paper Taping 2mm Pitch (15000 pcs.)
RL
XW
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistor for Temperature Sensor Thermo String Type
(Part Number)
F
A
2
B
025
NXF
T
15 XH 103
q
w
e
r
t
y
u
i
o
!
qProduct ID
uLead Wire Type
Product ID
Code
Lead Wire Type
NXF
NTC Thermistors Sensor Thermo String Type
A
ø0.3 Copper Lead Wire with Polyurethane Coat
wIndividual Specifications
iShape of the Lead Wire Kink
Code
Individual Specifications
Shape of the Lead Wire Kink
Code
T
Commercial Type
The Twist of Lead Wire Type
Standard Type
1
2
eChip Dimensions
oPackaging
Code
Dimensions (LxT)
EIA
15
1.00 x 0.50mm
0402
Code
Packaging
B
Bulk
rTemperature Characteristics
!Dimensions (Full Length)
Code
WB
WF
Temperature Characteristics
Nominal B-Constant 4050–4099K
Nominal B-Constant 4250–4299K
Nominal B-Constant 3350–3399K
Code
025
030
040
050
060
070
080
090
100
110
120
130
140
150
Dimensions (Full Length)
25mm
XH
30mm
40mm
tResistance
50mm
Expressed by three figures. The unit is (Ω). The first and second
figures are significant digits, and the third figure expresses the
number of zeros which follow the two figures.
60mm
70mm
80mm
Ex.
Code
103
Resistance
10kΩ
90mm
100mm
110mm
120mm
130mm
140mm
150mm
473
47kΩ
104
100kΩ
yResistance Tolerance
Code
Resistance Tolerance
F
±1%
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors for Temperature Sensor Lead Type
(Part Number)
E1 B0
NT SA0 XH 103
F
q
w
e
r
t
y
u
qProduct ID
tResistance Tolerance
Product ID
Code
Resistance Tolerance
NT
NTC Thermistors
E
F
±3%
±1%
wSeries
yIndividual Specifications
Code
Series
A lead structure and other specifications are expressed by two-digit
alphanumerics.
SA0
for Temperature Sensors No Lead-coating Type
for Temperature Sensors Lead-coating Type
(Total Length 30mm max.)
SD0
SD1
Individual Specifications
Standard Bulk (NTSA, NTSD0 Series)
Standard Ammo Pack Taping (NTSA Series)
Standard Bulk (NTSD1 Series)
Code
E1
for Temperature Sensors Lead-coating Type
(Total Length 30 to 50mm)
N6
PB
eTemperature Characteristics
uPackaging (NTSA/NTSD0 Series)
Code
WB
WC
WD
WF
XH
Temperature Characteristics
Nominal B-Constant 4050e4099K
Nominal B-Constant 4100e4149K
Nominal B-Constant 4150e4199K
Nominal B-Constant 4250e4299K
Nominal B-Constant 3350e3399K
Nominal B-Constant 3500e3549K
Nominal B-Constant 3700e3749K
Nominal B-Constant 3900e3949K
Code
Packaging
A0
B0
Ammo Pack Taping
Bulk
uTotal Length (NTSD1 Series)
XM
XR
Code
30
Total Length
30mm
XV
40
40mm
50
50mm
rResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures.
Ex.
Code
202
Resistance
2kΩ
203
20kΩ
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors for Inrush Current Suppression Lead Type
(Part Number)
NT PA7 160
L
BM B0
q
w
e
r
t
y
qProduct ID
rResistance Tolerance
Product ID
Code
Resistance Tolerance
NT
NTC Thermistors
L
±15%
wSeries
tIndividual Specifications
A lead structure and other specifications are expressed
by two-digit alphanumerics.
Code
PA7
PA9
PAA
PAD
PAJ
PAN
Series
Nominal Body Diameter
ø7mm
ø9mm
Individual Specifications
Standard Type (Ammo Pack) ø7mm, ø9mm
Standard Type (Bulk) ø7mm, ø9mm
Standard Type (Ammo Pack) ø10mm, ø13mm
Body Diameter
Code
B1
Inrush Current
Suppression
Lead Type
ø10mm
ø13mm
BM
D6
ø18mm
ø22mm
Standard (Bulk)
Standard (Bulk)
ø18mm, ø22mm
ø10mm, ø13mm
DK
DN
eResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits.
yPackaging
Code
A0
Packaging
Ammo Pack Taping
Bulk
B0
Ex.
Code
3R0
100
Resistance
3Ω
10Ω
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Feb.21,2011
!Note
R44E.pdf
Basic Characteristics
!Basic Characteristics
1. Zero-power Resistance of Thermistor: R
R=R0 expB (1/T-1/T0) ..............(1)
R: Resistance in ambient temperature T (K)
(K: absolute temperature)
Resistance vs. Temperature
102
R0: Resistance in ambient temperature T0 (K)
B: B-Constant of Thermistor
101
2. B-Constant
as (1) formula
1
B=Rn (R/R0) / (1/T-1/T0) ............(2)
3. Thermal Dissipation Constant
10−1
When electric power P (mW) is spent in ambient
temperature T1 and thermistor temperature rises T2,
there is a formula as follows
B=3450
B=3900
B=4100
P=C (T2-T1) ..................(3)
C: Thermal dissipation constant (mW/°C)
Thermal dissipation constant is varied with dimensions,
measurement conditions, etc.
10−2
−20
0
20 40 60 80 100 120
Temperature (˚C)
4. Thermal Time Constant
Period in which Thermistor's temperature will change
63.2% of its temperature difference from ambient
temperature T0 (°C) to T1 (°C).
Thermal Time Constant
T1
X
63.2%
T0
Time
!Performance
Item
Condition
Resistance
B-Constant
Measured by zero-power in specified ambient temperature.
Calculated between two specified ambient temperatures by next formula.
T and T0 is absolute temperature (K).
Rn (R/R0)
B =
1/TY1/T0
Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating.
It is calculated by next formula (mW/˚C).
Thermal Dissipation
Constant
P
C =
TYT0
Shows the required electric power that causes Thermistor's temperature to rise to a specified temperature by self heating,
at ambient temperature of 25 °C.
Rated Electric Power
Permissive Operating Current
It is possible to keep Thermistor's temperature rising max. 1˚C.
Please inquire about test conditions and ratings.
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
1
NTC Thermistors
Temperature Sensor and Compensation 0201 (0603) Size
0201/0402/0603/0805 sized Chip NTC Thermistors
have a unique inner construction and nickel barrier
terminations which provide excellent solderability
and high stability in the application environment.
0.15±0.05
0.15±0.05
0.60±0.03
■ Features
1. Excellent solderability and high stability in environment
2. Excellent long-term aging stability
3. High accuracy in resistance and B-Constant
Electrode
(Ag System + Ni Plating + Sn Plating)
4. Reflow soldering possible
(in mm)
5. NCP series are recognized by UL/cUL
(UL1434, File No. E137188).
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric circuits
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NCP03YS110J05RL
NCP03YS220J05RL
NCP03YS330J05RL
NCP03YS470J05RL
NCP03YS680J05RL
NCP03YS101J05RL
NCP03XM102p05RL
NCP03XM152p05RL
NCP03XM222p05RL
NCP03XM332p05RL
NCP03XM472p05RL
NCP03XH682p05RL
NCP03XH103F25RL
NCP03XH103F05RL
NCP03XH103p05RL
NCP03XV103p05RL
NCP03XH153p05RL
NCP03XH223p05RL
NCP03WF333p05RL
NCP03WB473p05RL
NCP03WL473p05RL
NCP03WF683p05RL
NCP03WL683p05RL
NCP03WF104F05RL
NCP03WF104p05RL
NCP03WL104p05RL
NCP03WL154p05RL
NCP03WL224p05RL
11 ±5%
22 ±5%
33 ±5%
47 ±5%
68 ±5%
100 ±5%
1.0k
2750 ±3%
2750 ±3%
2750 ±3%
2750 ±3%
2750 ±3%
2750 ±3%
3500 ±1%
3500 ±1%
3500 ±1%
3500 ±1%
3500 ±1%
3380 ±1%
3380 ±0.8%
3380 ±1%
3380 ±1%
3900 ±1%
3380 ±1%
3380 ±1%
4250 ±1%
4050 ±3%
4485 ±1%
4250 ±1%
4485 ±1%
4250 ±1%
4250 ±1%
4485 ±1%
4485 ±1%
4485 ±1%
2758
2758
2758
2758
2758
2758
3539
3539
3539
3539
3539
3428
3428
3428
3428
3930
3428
3428
4303
4101
4537
4303
4537
4303
4303
4537
4537
4537
2758
2758
2758
2758
2758
2758
3545
3545
3545
3545
3545
3434
3434
3434
3434
3934
3434
3434
4311
4108
4543
4311
4543
4311
4311
4543
4543
4543
2758
2758
2758
2758
2758
2758
3560
3560
3560
3560
3560
3455
3455
3455
3455
3944
3455
3455
4334
4131
4557
4334
4557
4334
4334
4557
4557
4557
9.50
6.70
5.50
4.60
3.80
3.10
1.00
0.81
0.67
0.55
0.46
0.38
0.31
0.31
0.31
0.31
0.25
0.21
0.17
0.14
0.14
0.12
0.12
0.10
0.10
0.10
0.08
0.06
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.5k
2.2k
3.3k
4.7k
6.8k
10k ±1%
10k ±1%
10k
10k
15k
22k
33k
47k
47k
68k
68k
100k ±1%
100k
100k
150k
220k
p is filled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors
Temperature Sensor and Compensation 0402 (1005) Size
0201/0402/0603/0805 sized Chip NTC Thermistors
have a unique inner construction and nickel barrier
terminations which provide excellent solderability
2
and high stability in the application environment.
0.25±0.10
0.25±0.10
1.0±0.05
■ Features
1. Excellent solderability and high stability in
environment
2. Excellent long-term aging stability
Electrode
(Ag System + Ni Plating + Sn Plating)
3. High accuracy in resistance and B-Constant
4. Reflow soldering possible
(in mm)
5. Provide flexibility to use the smaller size version
in certain circuits because of same B-Constant in
the same resistance.
6. NCP series are recognized by UL/cUL
(UL1434, File No. E137188).
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NCP15XC220p03RC
NCP15XC330p03RC
NCP15XC470p03RC
NCP15XC680p03RC
NCP15XF101p03RC
NCP15XF151p03RC
NCP15XM221p03RC
NCP15XM331p03RC
NCP15XQ471p03RC
NCP15XQ681p03RC
NCP15XQ102p03RC
NCP15XW152p03RC
NCP15XW222p03RC
NCP15XW332p03RC
NCP15XM472p03RC
NCP15XW472p03RC
NCP15XW682p03RC
NCP15XH103D03RC
NCP15XH103F03RC
NCP15XH103p03RC
NCP15XV103p03RC
NCP15XW153p03RC
NCP15XW223p03RC
NCP15WL223p03RC
NCP15WB333p03RC
22
3100 ±3%
3100 ±3%
3100 ±3%
3100 ±3%
3250 ±3%
3250 ±3%
3500 ±3%
3500 ±3%
3650 ±2%
3650 ±3%
3650 ±2%
3950 ±3%
3950 ±3%
3950 ±3%
3500 ±2%
3950 ±3%
3950 ±3%
3126
3126
3126
3126
3282
3282
3539
3539
3688
3688
3688
3982
3982
3982
3539
3982
3982
3428
3428
3428
3930
3982
3982
4537
4101
3128
3128
3128
3128
3284
3284
3545
3545
3693
3693
3693
3987
3987
3987
3545
3987
3987
3434
3434
3434
3934
3987
3987
4543
4108
3136
3136
3136
3136
3296
3296
3560
3560
3706
3706
3706
3998
3998
3998
3560
3998
3998
3455
3455
3455
3944
3998
3998
4557
4131
6.70
5.50
4.60
3.80
3.10
2.50
2.10
1.70
1.40
1.20
1.00
0.81
0.67
0.55
0.46
0.46
0.38
0.31
0.31
0.31
0.31
0.25
0.21
0.21
0.17
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
33
47
68
100
150
220
330
470
680
1.0k
1.5k
2.2k
3.3k
4.7k
4.7k
6.8k
10k ±0.5% 3380 ±0.7%
10k ±1%
10k
3380 ±1%
3380 ±1%
3900 ±3%
3950 ±3%
3950 ±3%
4485 ±1%
4050 ±3%
10k
15k
22k
22k
33k
Continued on the following page.
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Continued from the preceding page.
Resistance
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
Part Number
(25°C)
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
(ohm)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NCP15WL333p03RC
33k
4485 ±1%
4537
4101
4101
4101
4537
4201
4537
4303
4303
4303
4537
4537
4571
4571
4571
4543
4108
4108
4108
4543
4209
4543
4311
4311
4311
4543
4543
4582
4582
4582
4557
4131
4131
4131
4557
4232
4557
4334
4334
4334
4557
4557
4614
4614
4614
0.17
0.14
0.14
0.14
0.14
0.12
0.12
0.10
0.10
0.10
0.10
0.08
0.08
0.06
0.04
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NCP15WB473D03RC 47k ±0.5% 4050 ±0.5%
NCP15WB473F03RC
NCP15WB473p03RC
NCP15WL473p03RC
NCP15WD683p03RC
NCP15WL683p03RC
47k ±1%
47k
4050 ±1%
4050 ±1%
4485 ±1%
4150 ±3%
4485 ±1%
47k
68k
2
68k
NCP15WF104D03RC 100k ±0.5% 4250 ±0.5%
NCP15WF104F03RC
NCP15WF104p03RC
NCP15WL104p03RC
NCP15WL154p03RC
NCP15WM154p03RC
NCP15WM224p03RC
NCP15WM474p03RC
100k ±1%
100k
4250 ±1%
4250 ±1%
4485 ±1%
4485 ±1%
4500 ±3%
4500 ±3%
4500 ±3%
100k
150k
150k
220k
470k
p is filled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors
Temperature Sensor and Compensation 0603 (1608) Size
0201/0402/0603/0805 sized Chip NTC Thermistors
have a unique inner construction and nickel barrier
terminations which provide excellent solderability
and high stability in the application environment.
0.2-0.6
0.2-0.6
1.6±0.15
■ Features
1. Excellent solderability and high stability in
3
environment
2. Excellent long-term aging stability
Electrode
(Ag System + Ni Plating + Sn Plating)
3. High accuracy in resistance and B-constant
4. Flow / Reflow soldering possible
(in mm)
5. Provide flexibility to use the smaller size version
in certain circuits because of same B-Constant in
the same resistance.
6. NCP series are recognized by UL/cUL
(UL1434, File No. E137188).
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NCP18XF101p03RB
NCP18XF151p03RB
NCP18XM221p03RB
NCP18XM331p03RB
NCP18XQ471p03RB
NCP18XQ681p03RB
NCP18XQ102p03RB
NCP18XW152p03RB
NCP18XW222p03RB
NCP18XW332p03RB
NCP18XM472p03RB
NCP18XW472p03RB
NCP18XW682p03RB
NCP18XH103D03RB
NCP18XH103F03RB
NCP18XH103p03RB
NCP18XV103p03RB
NCP18XW153p03RB
NCP18XW223p03RB
NCP18WB333p03RB
100
150
220
330
470
680
1.0k
1.5k
2.2k
3.3k
4.7k
4.7k
6.8k
3250 ±3%
3250 ±3%
3500 ±3%
3500 ±3%
3650 ±2%
3650 ±3%
3650 ±2%
3950 ±3%
3950 ±3%
3950 ±3%
3500 ±2%
3950 ±3%
3950 ±3%
3282
3282
3539
3539
3688
3688
3688
3982
3982
3982
3539
3982
3982
3428
3428
3428
3930
3982
3982
4101
4101
4101
4101
4201
4255
3284
3284
3545
3545
3693
3693
3693
3987
3987
3987
3545
3987
3987
3434
3434
3434
3934
3987
3987
4108
4108
4108
4108
4209
4260
3296
3296
3560
3560
3706
3706
3706
3998
3998
3998
3560
3998
3998
3455
3455
3455
3944
3998
3998
4131
4131
4131
4131
4232
4282
3.10
2.50
2.10
1.70
1.40
1.20
1.00
0.81
0.67
0.55
0.46
0.46
0.38
0.31
0.31
0.31
0.31
0.25
0.21
0.17
0.14
0.14
0.14
0.12
0.10
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10k ±0.5% 3380 ±0.7%
10k ±1%
10k
3380 ±1%
3380 ±1%
3900 ±3%
3950 ±3%
3950 ±3%
4050 ±3%
10k
15k
22k
33k
NCP18WB473D03RB 47k ±0.5% 4030 ±0.5%
NCP18WB473F10RB
NCP18WB473p03RB
NCP18WD683p03RB
47k ±1%
47k
4050 ±1.5%
4050 ±2%
4150 ±3%
68k
NCP18WF104D03RB 100k ±0.5% 4200 ±0.5%
Continued on the following page.
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Continued from the preceding page.
Resistance
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
Part Number
(25°C)
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
(ohm)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NCP18WF104F12RB
NCP18WF104p03RB
NCP18WM154p03RB
NCP18WM224p03RB
NCP18WM474p03RB
100k ±1%
100k
4200 ±1%
4250 ±2%
4500 ±3%
4500 ±3%
4500 ±3%
4255
4303
4571
4571
4571
4260
4311
4582
4582
4582
4282
4334
4614
4614
4614
0.10
0.10
0.08
0.06
0.04
100
100
100
100
100
1
1
1
1
1
150k
220k
470k
p is filled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
3
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors
Temperature Sensor and Compensation 0805 (2012) Size
0201/0402/0603/0805 sized Chip NTC Thermistors
have a unique inner construction and nickel barrier
terminations which provide excellent solderability
0.2-0.7
0.2-0.7
and high stability in the application environment.
2.0±0.2
■ Features
1. Excellent solderability and high stability in
environment
2. Excellent long-term aging stability
3. High accuracy in resistance and B-constant
4. Flow / Reflow soldering possible
5. Provide flexibility to use the smaller size version
in certain circuits because of same B-Constant in
the same resistance.
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
4
6. NCP series are recognized by UL/cUL
(UL1434, File No. E137188).
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
NCP21XM221J03RA
NCP21XQ471J03RA
NCP21XQ102J03RA
NCP21XW222J03RA
NCP21XM472J03RA
NCP21XV103J03RA
NCP21XW153J03RA
NCP21XW223J03RA
NCP21WB333J03RA
NCP21WB473J03RA
NCP21WF104J03RA
220 ±5%
470 ±5%
1.0k ±5%
2.2k ±5%
4.7k ±5%
10k ±5%
15k ±5%
22k ±5%
33k ±5%
47k ±5%
100k ±5%
3500 ±3%
3650 ±3%
3650 ±3%
3950 ±3%
3500 ±3%
3900 ±3%
3950 ±3%
3950 ±3%
4050 ±3%
4050 ±3%
4250 ±3%
3539
3688
3688
3982
3539
3930
3982
3982
4101
4101
4303
3545
3693
3693
3987
3545
3934
3987
3987
4108
4108
4311
3560
3706
3706
3998
3560
3944
3998
3998
4131
4131
4334
3.00
2.00
1.40
0.90
0.65
0.44
0.36
0.30
0.24
0.20
0.14
200
200
200
200
200
200
200
200
200
200
200
2
2
2
2
2
2
2
2
2
2
2
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions
Solder Resist
Land
Chip
b
a
Dimensions (mm)
Soldering
Methods
Part Number
Chip (LxW)
a
b
c
NCP03
NCP15
Reflow Soldering 0.6x0.3
Reflow Soldering 1.0x0.5
0.25
0.25
0.3
0.4 0.4-0.5 0.5
0.6-1.0 0.8-0.9 0.6-0.8
0.6-0.8 0.6-0.7 0.6-0.8
1.0-1.1 0.9-1.0 1.0-1.2
1.0-1.1 0.6-0.7 1.0-1.2
Flow Soldering
Reflow Soldering
NCP18
NCP21
1.6x0.8
Flow Soldering
Reflow Soldering
2.0x1.25
4
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Part Number NCPppYS110 NCPppYS220 NCPppXC220 NCPppYS330 NCPppXC330
NCPppYS470 NCPppXC470 NCPppYS680
Resistance
B-Constant
11Ω
2750K
22Ω
2750K
22Ω
3100K
33Ω
2750K
33Ω
3100K
47Ω
2750K
47Ω
3100K
68Ω
2750K
Temp. (°C) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)
Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
127.366
101.662
81.726
66.148
53.946
44.273
36.494
30.262
25.226
21.150
17.828
15.103
12.859
11.000
9.452
8.162
7.077
6.161
5.389
4.731
4.168
3.687
3.273
254.732
203.325
163.452
132.296
107.893
88.546
72.987
60.523
50.451
42.300
35.657
30.205
25.719
22.000
18.904
16.323
14.155
12.323
10.778
9.461
8.336
7.374
6.545
5.830
5.210
4.671
4.201
3.789
3.427
3.107
2.825
2.574
2.352
2.153
355.823
273.975
213.003
166.943
131.997
105.318
84.670
68.628
55.981
45.859
37.819
31.396
26.211
22.000
18.560
15.735
13.403
11.462
9.842
8.488
7.348
6.399
5.595
4.896
4.299
3.795
3.360
382.098
304.987
245.178
198.444
161.839
132.819
109.481
90.785
75.677
63.449
53.485
45.308
38.578
33.000
28.356
24.485
21.232
18.484
16.167
14.192
12.504
11.061
9.817
533.734
410.962
319.504
250.415
197.996
157.978
127.005
102.942
83.972
68.789
56.728
47.094
39.317
33.000
27.840
23.603
20.104
17.193
14.763
12.732
11.022
9.598
8.392
7.345
6.448
5.692
5.040
4.474
3.983
3.551
3.173
2.851
2.568
2.314
544.201
434.376
349.193
282.633
230.498
189.167
155.927
129.299
107.782
90.367
76.176
64.529
54.944
47.000
40.386
34.872
30.239
26.326
23.025
20.213
17.809
15.753
13.982
12.454
11.130
9.979
760.166
585.310
455.051
356.652
281.994
224.998
180.886
146.614
119.596
97.972
80.794
67.073
55.997
47.000
39.651
33.616
28.633
24.487
21.026
18.133
15.698
13.670
11.952
10.461
9.184
787.354
628.459
505.215
408.915
333.487
273.688
225.597
187.071
155.940
130.744
110.212
93.361
79.494
68.000
58.430
50.454
43.750
38.089
33.313
29.244
25.766
22.792
20.230
18.019
16.102
14.437
12.984
11.710
10.591
9.604
4
2.915
2.605
2.335
2.100
1.894
1.713
1.554
1.412
8.744
7.814
7.006
6.301
5.683
5.140
4.661
4.237
8.107
7.179
6.373
5.673
5.057
4.520
4.060
3.657
8.974
8.094
7.320
6.638
6.035
5.500
5.024
4.600
2.983
2.656
2.367
2.116
1.901
1.712
1.543
8.731
7.957
7.269
6.655
1.287
1.176
1.077
3.862
3.528
3.230
3.296
Part Number NCPppXC680 NCPppYS101 NCPppXF101 NCPppXF151 NCPppXM221 NCPppXM331
NCPppXQ471 NCPppXQ681
Resistance
B-Constant
68Ω
3100K
100Ω
2750K
100Ω
3250K
150Ω
3250K
220Ω
3500K
330Ω
3500K
470Ω
3650K
680Ω
3650K
Temp. (°C) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)
Resistance (Ω) Resistance (Ω)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
1099.815
846.832
658.372
516.007
407.991
325.529
261.707
212.123
173.033
141.747
116.894
97.042
81.016
68.000
57.368
48.636
41.426
35.428
30.421
26.235
22.712
19.778
17.293
15.134
13.288
11.729
10.386
9.220
1157.874
924.204
742.963
601.346
490.422
402.482
331.760
275.105
229.324
192.270
162.076
137.296
116.902
100.000
85.927
74.197
64.339
56.013
48.989
43.006
37.891
33.517
29.750
26.498
23.680
21.231
19.094
17.221
15.575
14.124
12.840
11.702
10.690
9.787
1824.175
1390.685
1070.653
831.138
650.960
514.441
409.700
328.877
265.759
215.785
176.395
145.161
120.152
100.000
83.669
70.361
59.456
50.470
43.029
36.830
31.649
27.364
23.756
20.651
18.011
15.800
13.908
12.263
10.844
9.622
2736.262
2086.028
1605.979
1246.708
976.440
771.661
614.550
493.315
398.639
323.677
264.592
217.742
180.228
150.000
125.503
105.541
89.184
75.705
64.543
55.246
47.473
41.045
35.634
30.976
27.016
4947.904
3703.755
2798.873
2135.887
1645.037
1278.034
1000.620
789.612
627.752
502.474
405.010
328.480
268.044
220.000
181.576
150.668
125.681
105.336
88.717
75.059
63.777
54.415
46.631
40.115
34.637
30.013
26.110
7421.856
5555.632
4198.309
3203.831
2467.555
1917.051
1500.930
1184.418
941.628
753.711
607.514
492.720
402.066
330.000
272.365
226.002
188.521
158.004
133.076
112.588
95.666
81.622
69.946
60.172
51.955
45.019
39.165
34.186
29.935
26.312
23.180
20.494
18.171
11822.473
8767.745
6570.224
4971.784
3796.933
2923.400
2269.599
1775.225
1399.050
1110.220
887.257
713.463
577.375
470.000
384.800
316.757
262.177
218.069
182.297
153.150
129.249
109.551
93.281
17104.854
12685.248
9505.855
7193.219
5493.436
4229.599
3283.675
2568.411
2024.158
1606.275
1283.691
1032.245
835.351
680.000
556.733
458.287
379.320
315.504
263.749
221.579
186.998
158.499
134.960
115.383
99.029
79.750
68.446
58.996
51.036
44.332
38.640
33.790
29.664
23.700
20.862
18.394
16.265
14.434
12.844
11.472
10.275
85.356
73.839
64.140
55.905
48.888
42.918
37.795
33.409
22.790
19.957
17.541
15.453
13.663
12.114
10.778
8.208
7.317
6.539
5.874
5.291
4.768
8.563
7.648
6.850
6.162
26.123
23.091
20.472
9.243
16.168
29.618
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
Continued on the following page.
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Part Number NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 NCPppXM222 NCPppXW222 NCPppXM332 NCPppXW332
Resistance
B-Constant
1kΩ
3500K
1kΩ
3650K
1.5kΩ
3500K
1.5kΩ
3950K
2.2kΩ
3500K
2.2kΩ
3950K
3.3kΩ
3500K
3.3kΩ
3950K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
21.266
16.150
12.347
9.503
7.365
5.747
4.516
3.572
2.844
2.280
1.839
1.492
1.218
1.000
0.825
0.685
0.571
0.479
0.403
0.341
0.290
0.247
0.212
0.182
0.157
0.136
0.119
0.104
0.091
0.080
0.070
0.062
0.055
0.049
25.154
18.655
13.979
10.578
8.079
6.220
4.829
3.777
2.977
2.362
1.888
1.518
1.229
1.000
0.819
0.674
0.558
0.464
0.388
0.326
0.275
0.233
0.199
0.170
0.146
0.126
0.109
0.094
0.082
0.072
0.063
0.056
0.049
0.044
31.899
24.225
18.520
14.255
11.047
8.621
6.773
5.358
4.266
3.419
2.758
2.238
1.827
1.500
1.238
1.027
0.857
0.718
0.605
0.512
0.435
0.371
0.318
0.274
0.236
0.205
0.178
0.155
0.136
0.120
0.105
0.093
0.083
0.074
51.791
37.172
27.005
19.843
14.728
11.044
8.362
6.389
4.922
3.825
2.994
2.361
1.876
1.500
1.207
0.978
0.797
0.653
0.538
0.446
0.371
0.311
0.261
0.221
0.187
0.160
0.137
0.117
0.101
0.088
0.076
0.067
0.058
0.051
46.786
35.530
27.162
20.907
16.203
12.644
9.934
7.858
6.257
5.015
4.045
3.283
2.680
2.200
1.816
1.507
1.257
1.053
0.887
0.751
0.638
0.544
0.466
0.401
0.346
0.300
0.261
0.228
0.200
0.175
0.155
0.137
0.121
0.108
75.961
54.520
39.607
29.103
21.601
16.198
12.264
9.370
7.219
5.609
4.391
3.463
2.751
2.200
1.771
1.434
1.169
0.958
0.789
0.654
0.545
0.456
0.383
0.324
0.275
0.234
0.200
0.172
0.149
0.129
0.112
0.098
0.085
0.075
70.179
53.295
40.743
31.360
24.304
18.966
14.901
11.787
9.386
7.523
6.067
4.924
4.019
3.300
2.724
2.260
1.885
1.580
1.331
1.126
0.957
0.816
0.700
0.602
0.520
0.450
0.392
0.342
0.299
0.263
0.232
0.205
0.182
0.162
113.941
81.779
59.411
43.654
32.401
24.297
18.396
14.055
10.829
8.414
6.586
5.195
4.126
3.300
2.656
2.152
1.753
1.437
1.184
0.981
0.817
0.684
0.575
0.486
0.412
0.351
0.301
0.258
0.223
0.193
0.168
0.146
0.128
0.113
4
Part Number NCPppXM472 NCPppXW472 NCPppXH682 NCPppXW682 NCPppXH103 NCPppXV103 NCPppXH153 NCPppXW153
Resistance
B-Constant
4.7kΩ
3500K
4.7kΩ
3950K
6.8kΩ
3380K
6.8kΩ
3950K
10kΩ
3380K
10kΩ
3900K
15kΩ
3380K
15kΩ
3950K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
105.705
79.126
59.794
45.630
35.144
27.303
21.377
16.869
13.411
10.735
8.653
7.018
5.726
4.700
3.879
3.219
2.685
2.250
1.895
1.604
1.363
1.163
0.996
0.857
0.740
0.641
0.558
0.487
0.426
0.375
0.330
0.292
0.259
0.230
162.279
116.474
84.615
62.173
46.147
34.604
26.200
20.018
15.423
11.984
9.380
7.399
5.877
4.700
3.783
3.064
2.497
2.046
1.686
1.397
1.164
0.974
0.819
0.692
0.587
0.500
0.428
0.368
0.318
0.275
0.239
0.208
0.182
0.160
133.043
100.756
77.076
59.540
46.401
36.482
28.904
23.047
18.509
14.974
12.189
9.978
8.215
6.800
5.654
4.725
3.967
3.344
2.829
2.404
2.050
1.759
1.515
1.309
1.135
0.988
0.862
0.755
0.662
0.583
0.515
0.457
0.406
0.361
234.787
168.515
122.422
89.953
66.766
50.066
37.906
28.963
22.313
17.338
13.571
10.705
8.503
6.800
5.474
4.434
3.613
2.961
2.440
2.022
1.683
1.409
1.185
1.001
0.849
0.724
0.620
0.532
0.459
0.398
0.346
0.302
0.264
0.232
195.652
148.171
113.347
87.559
68.237
53.650
42.506
33.892
27.219
22.021
17.926
14.674
12.081
10.000
8.315
6.948
5.834
4.917
4.161
3.535
3.014
2.586
2.228
328.996
237.387
173.185
127.773
95.327
71.746
54.564
41.813
32.330
25.194
19.785
15.651
12.468
10.000
8.072
6.556
5.356
4.401
3.635
3.019
2.521
2.115
1.781
293.478
222.256
170.021
131.338
102.355
80.474
63.759
50.838
40.828
33.032
26.888
22.010
18.121
15.000
12.472
10.422
8.751
7.375
6.241
5.302
4.521
3.879
3.341
2.887
2.503
517.912
371.724
270.048
198.426
147.278
110.439
83.617
63.888
49.221
38.245
29.936
23.613
18.756
15.000
12.074
9.780
7.969
6.531
5.382
4.459
3.713
3.108
2.613
2.208
1.925
1.669
1.452
1.268
1.110
0.974
0.858
0.758
1.509
1.284
1.097
0.941
0.810
0.701
0.608
0.530
1.873
1.597
1.367
1.174
1.013
0.878
0.763
0.665
2.178
1.902
1.664
1.461
1.287
1.137
1.007
0.895
0.672
0.596
0.531
0.463
0.406
0.358
0.582
0.511
0.797
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
Continued on the following page.
15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Part Number NCPppXH223 NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333 NCPppWL333 NCPppWB473 NCPppWL473
Resistance
B-Constant
22kΩ
3380K
22kΩ
3950K
22kΩ
4485K
33kΩ
4050K
33kΩ
4250K
33kΩ
4485K
47kΩ
4050K
47kΩ
4485K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
430.434
325.976
249.364
192.629
150.121
118.029
93.514
74.563
59.881
48.446
39.436
32.282
26.577
22.000
18.292
15.285
12.834
10.817
9.154
759.605
545.196
396.070
291.025
216.008
161.977
122.638
93.702
72.191
56.093
43.907
34.633
27.509
22.000
17.709
14.344
11.688
9.578
1073.436
753.900
535.073
383.590
277.643
202.813
149.462
111.082
83.233
62.858
47.831
36.664
28.304
22.000
17.214
13.557
10.744
8.566
1227.263
874.449
630.851
460.457
339.797
253.363
190.766
144.964
111.087
85.842
66.861
52.470
41.471
33.000
26.430
21.298
17.266
14.076
11.538
9.506
1451.049
1019.238
725.084
522.021
379.842
279.371
207.566
155.639
117.814
89.925
69.204
53.675
41.937
33.000
26.143
20.845
16.723
13.498
10.954
8.940
1610.154
1130.850
802.609
575.385
416.464
304.219
224.193
166.623
124.850
94.287
71.747
54.996
42.455
33.000
25.822
20.335
16.115
12.849
10.306
8.317
1747.920
1245.428
898.485
655.802
483.954
360.850
271.697
206.463
158.214
122.259
95.227
74.730
59.065
47.000
37.643
30.334
24.591
20.048
16.433
13.539
11.209
9.328
2293.249
1610.605
1143.110
819.487
593.146
433.281
319.305
237.312
177.816
134.287
102.184
78.327
60.467
47.000
36.776
28.962
22.952
18.301
14.679
11.845
9.610
7.894
6.540
5.446
4.559
6.871
5.544
4.498
3.669
7.777
6.631
5.690
4
7.870
6.549
7.334
6.046
6.748
5.504
65
7.839
70
4.901
3.832
3.009
5.475
5.011
4.513
7.798
6.427
75
4.234
3.239
2.479
4.595
4.170
3.718
6.544
5.296
80
3.671
2.748
2.052
3.874
3.487
3.078
5.518
4.384
85
3.195
2.342
1.707
3.282
2.928
2.560
4.674
3.646
90
2.790
2.004
1.426
2.789
2.469
2.139
3.972
3.046
95
2.441
1.722
1.196
2.379
2.091
1.794
3.388
2.555
100
105
110
115
120
125
2.142
1.888
1.668
1.477
1.312
1.169
1.486
1.287
1.119
0.975
0.854
0.750
1.008
0.852
0.724
0.617
0.528
0.454
2.038
1.751
1.509
1.306
1.134
0.987
1.777
1.516
1.298
1.116
0.962
0.832
1.511
1.278
1.085
0.925
0.792
0.681
2.902
2.494
2.150
1.860
1.615
1.406
2.152
1.820
1.546
1.318
1.128
0.970
Part Number NCPppWD683 NCPppWF683 NCPppWL683 NCPppWF104
NCPppWL104 NCPppWL154 NCPppWM154
NCP18WF104F
100kΩ±1%
4200K
Resistance
B-Constant
68kΩ
4150K
100kΩ
150kΩ
150kΩ
68kΩ
4250K
68kΩ
4485K
100kΩ
4250K
4485K
4485K
4500K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Resistance (kΩ) Resistance (kΩ)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
2735.359
1937.391
1389.345
1008.014
738.978
547.456
409.600
309.217
235.606
180.980
140.139
109.344
85.929
68.000
54.167
43.421
35.016
28.406
23.166
18.997
15.657
12.967
10.794
9.021
2990.041
2100.247
1494.113
1075.679
782.705
575.674
427.712
320.710
242.768
185.300
142.603
110.602
86.415
68.000
53.871
42.954
34.460
27.814
22.572
18.422
15.113
12.459
10.325
8.592
3317.893
2330.237
1653.862
1185.641
858.168
626.875
461.974
343.345
257.266
194.287
147.841
113.325
87.484
68.000
53.208
41.903
33.208
26.477
21.237
17.137
13.904
11.342
9.299
4397.119
3088.599
2197.225
1581.881
1151.037
846.579
628.988
471.632
357.012
272.500
209.710
162.651
127.080
100.000
79.222
63.167
50.677
40.904
33.195
27.091
22.224
18.323
15.184
12.635
10.566
8.873
4879.254
3426.818
2432.149
1743.590
1262.012
921.875
679.373
504.919
378.333
285.717
217.414
166.654
128.653
100.000
78.247
61.622
48.835
38.937
31.231
25.202
20.448
16.679
13.675
11.268
9.329
7318.881
5140.228
3648.224
2615.385
1893.018
1382.813
1019.059
757.379
567.499
428.575
326.121
249.981
192.979
150.000
117.370
92.433
73.252
58.406
46.846
37.803
30.671
25.018
20.513
16.902
13.993
11.638
9.721
7899.466
5466.118
3834.499
2720.523
1951.216
1415.565
1036.984
767.079
572.667
431.264
327.405
250.538
193.166
150.000
117.281
92.293
73.090
58.240
46.665
37.605
30.453
24.804
20.293
16.679
13.776
11.428
9.520
4205.686
2966.436
2118.789
1531.319
1118.422
825.570
615.526
463.104
351.706
269.305
207.891
161.722
126.723
100.000
79.439
63.509
51.084
41.336
33.628
27.510
22.621
18.692
15.525
12.947
10.849
9.129
65
70
75
80
85
90
7.662
6.343
5.276
4.407
7.575
6.387
5.407
7.185
6.033
5.087
7.758
6.481
7.481
7.713
95
4.598
4.309
3.697
6.337
5.437
8.155
7.966
6.546
100
105
110
115
120
125
3.922
3.359
2.887
2.489
2.155
1.870
3.661
3.124
2.675
2.299
1.983
1.715
3.114
2.634
2.236
1.907
1.632
1.403
5.384
4.594
3.934
3.380
2.916
2.522
4.580
3.873
3.289
2.804
2.400
2.064
6.869
5.810
4.933
4.206
3.601
3.096
6.688
5.639
4.772
4.052
3.454
2.955
5.572
4.764
4.087
3.518
3.040
2.634
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
Continued on the following page.
16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Part Number NCPppWL224 NCPppWM224 NCPppWM474
Resistance
B-Constant
220kΩ
4485K
220kΩ
4500K
470kΩ
4500K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
10734.358
7539.001
5350.729
3835.898
2776.427
2028.126
1494.620
1110.822
832.332
628.577
478.310
366.639
283.036
220.000
172.143
135.569
107.436
85.662
11585.884
8016.973
5623.931
3990.100
2861.784
2076.162
1520.909
1125.049
839.912
632.521
480.194
367.455
283.310
220.000
172.012
135.364
107.198
85.419
24751.661
17127.169
12014.762
8524.305
6113.811
4435.437
3249.216
2403.515
1794.358
1351.294
1025.870
785.018
605.252
470.000
367.480
289.186
229.014
182.485
146.215
117.828
95.420
68.708
55.444
44.984
68.441
55.153
44.665
4
65
36.694
36.379
77.718
70
30.085
29.763
63.584
75
24.789
24.462
52.260
80
20.523
20.205
43.166
85
17.068
16.761
35.808
90
14.258
13.962
29.828
95
11.961
11.684
24.961
100
105
110
115
120
125
10.075
8.521
7.236
6.169
5.281
4.540
9.809
8.270
6.998
5.942
5.067
4.334
20.955
17.668
14.951
12.695
10.824
9.259
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
17
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
2. Volatile or flammable gas
3. Dusty conditions
4. Under vacuum, or under high or low pressure
5. Wet or humid locations
Do not use under the following conditions because
all these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
8. Other places where similar hazardous conditions
exist
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may be
caused by the abnormal function or the failure of our
product.
4
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
Temperature -10 to +40 degrees C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
3. Storage place:
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
■ Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
■ Notice (Handling)
The ceramic of this product is fragile, and care must
be taken not to load an excessive press-force or
not to give a shock at handling.
Such forces may cause cracking or chipping.
18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type !Caution/Notice
■ Notice (Soldering and Mounting)
1. Mounting Position
Choose a mounting position that minimizes the stress
imposed on the chip during flexing or bending of the
board.
Component Direction
Locate this
product
horizontal to the
direction in
which stress
acts.
Mounting Close to Board Separation Line
C
Perforation
Holes
B
Keep this product on the
PC Board away from the
Separation Line.
D
A
Slit
Worst ← A-C-B-D → Better
4
2. Allowable Soldering Temperature and Time
(a) Solder within the temperature and time combinations
indicated by the slanted lines in the following graphs.
(b) Excessive soldering conditions may cause dissolution of
metallization or deterioration of solder-wetting on the
external electrode.
NCP03/15 Series
Allowable Reflow Soldering Temp. and Time
280
270
260
250
240
230
220
(c) In case of repeated soldering, the accumulated soldering
time should be within the range shown in the figure
below. (For example, Reflow peak temperature: 260°C,
twice -> The total accumulated soldering time at 260°C is
within 30 seconds.)
0
10 20 30 40 50 60 70 80 90
Time (sec.)
NCP18/21 Series
Allowable Flow Soldering Temp. and Time
Allowable Reflow Soldering Temp. and Time
280
270
260
250
240
230
220
210
280
270
260
250
240
230
220
210
0
10
20
30
0
10 20 30 40 50 60 70 80 90 100110
Time (sec.)
Time (sec.)
Continued on the following page.
19
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type !Caution/Notice
Continued from the preceding page.
3. Recommended Temperature Profile for Soldering
(a) Insufficient preheating may cause a crack on ceramic
NCP03/15 Series
body. The difference between preheating temperature
Reflow Soldering Conditions
and maximum temperature in the profile shall be 100 °C.
(b) Rapid cooling by dipping in solvent or by other means is
not recommended.
Gradual Cooling
(in air)
Preheating (in air) Soldering
300
200
100
0
1-2 min.
*20sec.
Preheating: 160±10°C, 1-2 min.
Soldering: 240-270°C, 20sec.
* In case of repeated soldering, the accumulated soldering
time should be within the range shown in the figure 2 above.
NCP18/21 Series
Flow Soldering Conditions
Reflow Soldering Conditions
4
Gradual Cooling
Gradual Cooling
Preheating (in air) Soldering
(in air)
Preheating (in air) Soldering
(in air)
300
200
100
0
300
200
100
0
1-2 min.
1-2 min.
*10sec.
*20sec.
Preheating: 160±10°C, 1-2 min.
Soldering: 230-260°C, 10sec.
Preheating: 160±10°C, 1-2 min.
Soldering: 230-270°C, 20sec.
4. Solder and Flux
(1) Solder and Paste
•Sn:Pb=63wt%:37wt%
(a) Reflow Soldering: NCP03/15/18/21 Series
Use RA/RMA type or equivalent type of solder paste. For
your reference, we are using the solder paste below for
any internal tests of this product.
•Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%
(2) Flux
Use rosin type flux in soldering process.
If the flux listed below is used, some problems might be
caused in the product characteristics and reliability.
Please do not use the following flux.
•RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%)
(Manufactured by Alpha Metals Japan Ltd.)
•M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%)
(Manufactured by Senju Metal Industry Co., Ltd.)
(b) Flow Soldering: NCP18/21 Series
• Strong acidic flux (with halide content exceeding
0.1wt%).
• Water-soluble flux
We are using the solder paste below for any internal tests
of this product.
(*Water-soluble flux can be defined as non rosin type
flux including wash-type flux and non-wash-type flux.)
5. Cleaning Conditions
NCP03/15
NCP18/21
For removing the flux after soldering, observe the following
points in order to avoid deterioration of the characteristics or
any change of the external electrodes' quality.
• Please keep mounted parts and a substrate from an
occurrence of resonance in ultrasonic cleaning.
• Please do not clean the products in the case of using a
non-washed type flux.
Solvent
Isopropyl Alcohol
Isopropyl Alcohol
Less than 5 minutes at
Dipping Cleaning room temp. or less than room temp. or less than
2 minutes at 40°C max. 2 minutes at 40°C max.
Less than 5 minutes at
Less than 5 minutes and Less than 1 minute and
20W/r
Frequency of 28kHz to
40kHz
20W/r
Frequency of several
10kHz to 100kHz
Ultrasonic Cleaning
6. Drying
After cleaning, promptly dry this product.
Continued on the following page.
20
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type !Caution/Notice
Continued from the preceding page.
7. Printing Conditions of Solder Paste
The amount of solder is critical. Standard height of fillet is
shown in the table below.
Reference: Optimum Solder Amount
Too much soldering may cause mechanical stress,
resulting in cracking, mechanical and/or electronic
damage.
E
T
Electrode
Solder
Solder
Part Number
The Solder Paste Thickness
T
NCP03
100µm
150µm
200µm
1/3EVTVE
1/3EVTVE
NCP15
NCP18/NCP21
0.2mmVTVE
4
8. Adhesive Application and Curing
Thin or insufficient adhesive may result in loose
component contact with land during flow soldering.
Low viscosity adhesive causes chips to slip after
mounting.
21
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Package
Minimum Quantity Guide
Quantity (pcs.)
Part Number
Paper Tape
15,000
10,000
4,000
Embossed Tape
NCP03
NCP15
NCP18
NCP21
-
-
4,000
Tape Carrier Packaging
1. Dimensions of Reel
2.0±0.5
ø13.0±0.2
ø21.0±0.8
4
W1.0
Y0
9.0
W0
Y1.5
13.0±1.0
ø180
(in mm)
2. Taping Method
(1) A tape in a reel contains Leader unit and Trailer unit where
products are not packed. (Please refer to the figure at the
right.)
Leader Unit
190-250 210-250
40 min.
Trailer Unit
Vacant Section Top Tape alone
Cover Tape alone
(2) The top and base tapes or, plastic and cover tape are not
stuck at the first five pitches minimum.
Chip-mounting Unit
(3) A label should be attached on the reel. (MURATA's part
number, inspection number and quantity should be marked
on the label.)
Direction of Feed
(4) Taping reels are packed in a package.
(in mm)
Continued on the following page.
22
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Package
Continued from the preceding page.
3. Paper Tape (NCP03/15/18 Series)
NCP03 Series
NCP15 Series
2.0±0.05
4.0±0.1
2.0±0.05
0.5 max.
0.8 max.
4.0±0.1
ø1.5+0.1/–0
ø1.5+0.1/–0
0.38
0.65
Direction of Feed
Direction of Feed
Reference Value
Reference Value
NCP18 Series
2.0±0.05
4.0±0.1 4.0±0.1
1.1 max.
ø1.5+0.1/–0
4
1.05
Direction of Feed
Reference Value
(in mm)
(1) Other Conditions
(a) Packaging
Products are packaged in the cavity of the base tape and
sealed by top tape and bottom tape.
(b) Tape
Top tape and bottom tape have no joints and products
are packaged and sealed in the cavity of the base tape,
continuously.
(2) Peeling Force of Top Tape
F
165-180 °
1 Peeling angle: 165 to 180 degrees against the fixed surface of tape.
2 Peeling speed: 300mm/min.
3 Peeling force: 0.1 - 0.6N
(3) Pull Strength
Pull strength of top tape is specified at 10N minimum.
Pull strength of bottom tape should be specified 5N minimum.
Continued on the following page.
23
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temp. Sensor and Compensation Chip Type Package
Continued from the preceding page.
4. Embossed Tape (NCP21 Series)
(1) Other Conditions
(a) Packaging
2.0±0.05
4.0±0.1 4.0±0.1
1.05
0.2
Products are packaged in each cavity of the Embossed
tape and sealed by Cover tape.
+0.1
-1
φ1.5
(b) Tape
Cover tape has no joints.
+0.3
-0
φ1.0
1.45
Reference Value
(in mm)
Direction of Feed
(2) Peeling Force of Cover Tape
165-180 °
4
1 Peeling angle: 165 to 180 degrees against the fixed surface of tape.
2 Peeling speed: 300mm/min.
3 Peeling force: 0.1 - 0.7N
(3) Tape Strength
Pull strength of Embossed tape and Cover tape should be
specified 10N minimum.
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors
Temperature Sensor Thermo String Type
1.2±0.4
1.2±0.4
This product is a small flexible lead type NTC Thermistor
with a small head and a thin lead wire.
■ Features
1. High accuracy and highly sensitive temperature sensing
is mode possible by the small size and high accuracy
NTC Thermistor.
ø0.30±0.05
2. Narrow space temperature sensing is made possible
by the small sensing head and the thin lead wire.
3. Flexibility and a wide variety of lengths (25 mm to 150mm)
enables the design of flexible temperature sensing
architectures.
(in mm)
The full length 25mm, 30 to 150mm Interval 10mm.
NXFT15_1B Type(twist)
4. This product is compatible with our 0402 (EIA) size
chip Thermistor.
1.2±0.4
1.2±0.4
5. Excellent long-term aging stability
6. This is halogen free product. *
* Cl= max.900ppm, Br=max.900ppm and
Cl+Br=max.1500ppm
7. NXFT series are recognized by UL/cUL
(UL1434, File No. E137188).
5
ø0.30±0.05
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
(in mm)
The full length 25mm, 30 to 150mm Interval 10mm.
NXFT15_2B Type(without twist)
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Operating Current
for Sensor (25°C)
(mA)
Rated Electric Typical Dissipation Thermal Time
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Power (25°C)
Constant (25°C)
(mW/°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mW)
(25°C) (s)
NXFT15XH103FApBppp 10k ±1% 3380 ±1%
NXFT15WB473FApBppp 47k ±1% 4050 ±1%
NXFT15WF104FApBppp 100k ±1% 4250 ±1%
3423
4091
4303
3431
4097
4311
3452
4114
4334
0.12
0.06
0.04
7.5
7.5
7.5
1.5
1.5
1.5
4
4
4
p is the filled with lead shape (1: twist, 2: without twist).
ppp is the filled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm)
Operating Current for Sensor rises Thermistor's temperature by 0.1°C
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 30°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
25
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temperature Sensor Thermo String Type Specifications and Test Methods
No.
1
Item
Specifications
Test Methods
High Temperature
Storage Test
125±2°C in air, for 1000 +48/-0 hours without loading.
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
Low Temperature
Storage Test
2
3
-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.
Humidity
Storage Test
60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without
loading.
-40 +0/-3°C, 30 minutes in air
+25±2°C, 10 to 15 minutes in air
+125±2°C, 30 minutes in air
+ 25 +2/-0°C, 10 to 15 minutes in air (1 cycle)
Continuous 100 cycles, without loading.
Temperature
Cycle
· Resistance (R25°C) fluctuation rate: less than ±2%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
4
High Temperature
Load
85±2°C in air, with 'Operating Current for Sensor' for 1000
+48/-0 hrs.
5
6
2mm length of coating resin from the top of Thermistor is to be
dipped into beads of lead (Pb), and DC100V 1 minute is
applied to circuit between beads of lead (Pb) and lead wire.
Insulation Break -
down Voltage
· No damage electrical characteristics at DC100 V, 1 min.
Both lead wires are dipped into 350±10°C solder for 3.5±0.5
seconds, or 260±5°C solder for 10±1 seconds according to
Fig-1 (solder <JIS Z 3282 H60A>).
Resistance to
Soldering Heat
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
7
5
1 to 2mm
Solder
Fig-1
Both lead wires are dipped into flux (25wt% colophony <JIS K
5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds.
Then both lead wires are dipped into 235±5°C solder
<JIS Z 3282 H60A> for 2±0.5 seconds according to Fig-1.
8
Solderability
More than 90% of lead wire surface shall be covered by solder.
The lead wire shall be inserted in a ø1.0mm hole until resin part
contacts with a substrate as shown in fig.-2, and 1N force for 10
seconds shall be applied to the lead wire.
Lead Wire
Pull Strength
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
9
1N (10 sec.)
Fig-2
Hold the lead wires as in Fig-3. Bend by 90 degrees and again
bend back to the initial position. Then bend to the other side by
90 degrees and again bend back to the initial position. After
bending process, 10N force for 3 seconds shall be applied to
the lead wire.
Lead Wire
Bending Strength
10
· Lead wire does not break.
10N (3 sec.)
Fig-3
* · R25 is zero-power resistance at 25°C.
· B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C.
· After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
Continued on the following page.
26
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temperature Sensor Thermo String Type Specifications and Test Methods
Continued from the preceding page.
Item
11 Free Fall
No.
Specifications
Test Methods
NTC Thermistor shall be dropped without any force onto
concrete floor from 1 meter height one time.
NTC Thermistor shall be fixed to the vibration test equipment.
Vibration of total 1.5 mm amplitude, Frequency sequence of
10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right
angled 3 directions for each 2 hours duration.
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
· No visible damage at resin part.
12 Vibration
Mount
Oscillating
Direction Z
Solder is attached
from the reverse side.
Oscillating
Direction Y
Oscillating
Direction X
* · R25 is zero-power resistance at 25°C.
· B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C.
· After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
5
27
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors
Temperature Sensor Lead Type
3.0 max. ( 3.3 max.) 1.8 max. ( 2.5 max.)
This product is a sensor type NTC Thermistor developed
by our unique ceramic technology and automatic assemble,
to be used in normal temperature ranges.
Epoxy Resin
■ Features
1. High accuracy of B-Constant tolerance +/-0.5%
+/-1% of resistance and +/-0.5% of B-Constant is
realized due to technical advantages of the
material and manufacturing process.
2. Quick response
Solder Plated Copper Ply Wire
ø0.4±0.03
2.5±1.0
Applicable to NTSA0XM202, NTSA0WB203
and NTSA0WC303 Types.
(in mm)
This product provides faster response time due
to its smaller size.
3. Taping type is available.
4. Strong lead strength
Original lead-wiring technique assures reliable
connection. It can be formed and bent flexibly
according to the mounting conditions.
■ Applications
1. Rechargeable batteries
2. Battery charging circuits
3. Printer heads
4. DC fan motors
5. Home appliance equipment
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
6
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(25°C) (s)
NTSA0XM202pE1B0
NTSA0XR502pE1B0
NTSA0XH103pE1B0
NTSA0XV103pE1B0
NTSA0WB203pE1B0
NTSA0WC303pE1B0
NTSA0WD503pE1B0
NTSA0WF104pE1B0
2.0k
5.0k
10k
10k
20k
30k
50k
100k
3500 ±0.5%
3700 ±1%
3380 ±0.5%
3900 ±0.5%
4050 ±1%
4100 ±1%
4150 ±1%
4250 ±1%
3523
3727
3428
3930
4078
4128
4205
4303
3526
3738
3434
3934
4080
4130
4213
4311
3543
3760
3455
3944
4096
4147
4234
4334
1.05
0.68
0.38
0.46
0.31
0.26
0.20
0.14
21
15
15
15
21
21
15
15
2.1
1.5
1.5
1.5
2.1
2.1
1.5
1.5
7
7
7
7
7
7
7
7
p is filled with resistance tolerance codes (F: ±1%, E: ±3%).
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
Taping type of part numbers with "N6A0" is available (Lead Spacing=5mm, Lead Diameter=ø0.5mm).
28
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors
Temperature Sensor Lead Insulation Type
3.0 max. ( 3.8 max.)
2.0 max. ( 2.5 max.)
This product is a sensor type NTC Thermistor developed
by our unique ceramic technology and automatic assemble,
to be used in normal temperature ranges.
■ Features
+1.5
−0.5
2.5
1. Electric insulation on lead wire
2. Excellent bending resistance due to suitable
hardness of surface coating
0.60-0.95
ø0.4±0.03
(Solder Plated
Copper Ply Wire)
3. Easy handling due to most suitable hardness of
surface of coating
NTSD0 Series
Applicable to NTSD0XM202, NTSD0WB203
and NTSD0WC303 Types.
(in mm)
4. High accuracy of B-Constant tolerance +/-0.5%
+/-1% of resistance and +/-0.5% of B-Constant is
realized due to technical advantages of the
material and manufacturing processes.
3.0 max. ( 3.8 max.)
2.0 max. ( 2.5 max.)
Epoxy Resin
ø0.46±0.03
Polyurethane Wire
■ Applications
2.5+1.5
-0.5
1. Rechargeable batteries
2. Battery charging circuits
3. Printer heads
ø0.45±0.05
Sn-Ag Solder Copper Wire
NTSD1XM202/NTSD1WB203/NTSD1WC303 Types
4. DC fan motors
(0.8)
5. Home appliance equipment
(in mm)
Type
L (mm)
30
NTSD1 Series
NTSD1_FPB30
NTSD1_FPB40
NTSD1_FPB50
40
50
NTSD0 Series
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
(25°C) (s)
NTSD0XM202pE1B0
NTSD0XR502pE1B0
NTSD0XH103pE1B0
NTSD0XV103pE1B0
NTSD0WB203pE1B0
NTSD0WC303pE1B0
NTSD0WD503pE1B0
NTSD0WF104pE1B0
2.0k
5.0k
10k
10k
20k
30k
50k
100k
3500 ±0.5%
3700 ±1%
3380 ±0.5%
3900 ±0.5%
4050 ±1%
4100 ±1%
4150 ±1%
4250 ±1%
3523
3727
3428
3930
4078
4128
4205
4303
3526
3738
3434
3934
4080
4130
4213
4311
3543
3760
3455
3944
4096
4147
4234
4334
1.05
0.68
0.38
0.46
0.31
0.26
0.20
0.14
21
2.1
7
7
7
7
7
7
7
7
15
15
15
21
21
15
15
1.5
1.5
1.5
2.1
2.1
1.5
1.5
7
p is filled with resistance tolerance codes (F: ±1%, E: ±3%).
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
NTSD1 Series
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
Part Number
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
(25°C) (s)
NTSD1XM202FPBpp
NTSD1XR502FPBpp
NTSD1XH103FPBpp
NTSD1XV103FPBpp
NTSD1WB203FPBpp
NTSD1WC303FPBpp
2.0k ±1% 3500 ±0.5%
5.0k ±1% 3700 ±1%
10k ±1% 3380 ±0.5%
10k ±1% 3900 ±0.5%
20k ±1% 4050 ±1%
30k ±1% 4100 ±1%
3523
3727
3428
3930
4078
4128
3526
3738
3434
3934
4080
4130
3543
3760
3455
3944
4096
4147
1.05
0.68
0.38
0.46
0.31
0.26
21
2.1
7
7
7
7
7
7
15
15
15
21
21
1.5
1.5
1.5
2.1
2.1
Continued on the following page.
29
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Continued from the preceding page.
Resistance
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
Part Number
(25°C)
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C)
Constant (25°C)
(mW/°C)
Constant
(ohm)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(25°C) (s)
NTSD1WD503FPBpp
NTSD1WF104FPBpp
50k ±1% 4150 ±1%
100k ±1% 4250 ±1%
4205
4303
4213
4311
4234
4334
0.20
0.14
15
15
1.5
1.5
7
7
pp is filled with Total-length codes (30, 40, 50).
Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35°C by self heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
■ Temperature Tolerance - Temperature Characteristics
Resistance Tolerance: +/-1% B-Constant Tolerance: +/-1%
Resistance Tolerance: +/-1% B-Constant Tolerance: +/-0.5%
3.0
3.0
2.0
1.0
0
2.0
1.0
0
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
7
30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temperature Sensor Temperature Characteristics (Center Value)
Part Number NXFpXH103
NXFpWB473
47kΩ
NXFpWF104
100kΩ
Resistance
B-Constant
10kΩ
3380K
4050K
4250K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
0
5
10
15
20
25
30
35
40
45
50
55
60
197.388
149.395
114.345
88.381
68.915
54.166
42.889
34.196
27.445
22.165
18.010
14.720
12.099
10.000
8.309
6.939
5.824
4.911
4.160
3.539
3.024
2.593
2.233
1690.590
1215.320
882.908
647.911
480.069
359.009
270.868
206.113
158.126
122.267
95.256
74.754
59.075
47.000
37.636
30.326
24.583
20.043
16.433
13.545
11.223
9.345
4221.280
2995.040
2147.000
1554.600
1136.690
839.019
624.987
469.678
355.975
272.011
209.489
162.559
127.057
100.000
79.222
63.167
50.677
40.904
33.195
27.091
22.224
18.323
15.184
12.635
10.566
8.873
65
70
75
80
7.818
6.571
5.548
4.704
1.929
1.673
1.455
85
90
1.270
4.004
7.481
95
1.112
3.422
6.337
100
105
110
115
120
125
0.976
0.860
0.759
0.673
0.598
0.532
2.936
2.528
2.184
1.893
1.646
1.436
5.384
4.594
3.934
3.380
2.916
2.522
Part Number
NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103 NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104
Resistance
20kΩ
30kΩ
50kΩ
100kΩ
2.0kΩ
5.0kΩ
10kΩ
10kΩ
B-Constant
Temp. (°C)
Y40
Y35
Y30
Y25
Y20
Y15
Y10
Y5
3500K
3700K
3380K
3900K
4050K
4100K
4150K
4250K
Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
44.657
33.505
25.388
19.402
14.961
11.644
9.133
7.198
5.716
4.571
3.682
2.987
2.437
2.000
1.651
1.371
1.143
0.958
0.807
0.683
0.582
0.497
0.426
0.367
0.318
0.276
0.240
0.210
0.183
0.161
0.142
0.125
0.111
0.099
123.484
92.295
69.614
52.860
40.480
31.275
24.339
19.154
15.148
11.964
9.520
7.624
6.160
5.000
4.082
3.354
2.773
2.299
1.914
1.607
1.356
1.149
0.978
0.834
0.714
0.612
0.527
0.456
0.396
0.345
0.302
0.264
0.232
0.205
195.652
148.171
113.347
87.559
68.237
53.650
42.506
33.892
27.219
22.021
17.926
14.674
12.081
10.000
8.315
6.948
5.834
4.917
4.161
3.535
3.014
2.586
2.228
347.808
248.591
179.973
131.832
97.679
73.119
55.301
42.257
32.582
25.324
19.847
15.679
12.478
10.000
8.068
6.552
5.353
4.399
3.635
3.020
2.521
2.115
1.783
733.007
524.831
380.184
277.845
205.260
153.642
116.016
88.125
67.522
52.168
40.617
31.847
25.151
20.000
16.014
12.902
10.457
8.527
6.993
5.771
4.789
3.992
3.343
2.809
2.376
2.020
1149.500
819.651
591.391
430.529
316.870
236.337
177.842
134.630
102.816
79.183
61.460
48.045
37.834
30.000
23.955
19.249
15.560
12.657
10.354
8.525
7.058
5.869
4.905
4.113
3.472
2.945
2.509
2.143
1.832
1.571
1.350
1.171
1.019
0.886
1948.575
1387.289
999.456
728.895
537.039
399.167
299.469
226.186
172.393
132.857
103.089
80.430
63.201
50.000
39.825
31.918
25.733
20.877
17.034
13.929
11.439
9.485
7.906
6.614
5.558
4.686
3.967
3.373
2.878
2.465
2.118
1.828
1.583
1.374
4256.752
3005.888
2148.514
1555.020
1137.312
839.314
625.338
469.127
355.224
272.045
209.803
162.713
127.117
100.000
79.215
63.150
50.649
40.885
33.195
27.014
22.079
18.226
15.124
12.598
10.542
8.852
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
7
1.925
1.669
1.452
1.268
1.110
0.974
0.858
0.758
1.510
1.284
1.096
0.939
0.808
0.698
0.605
0.527
1.724
1.476
1.264
1.085
0.935
0.812
0.708
0.617
7.463
6.321
5.374
4.585
3.925
3.376
2.913
2.520
0.671
0.596
0.531
0.460
0.403
0.354
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
31
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temperature Sensor Thermo String Type/Lead Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
2. Volatile or flammable gas
3. Dusty conditions
4. Under vacuum, or under high or low pressure
5. Wet or humid locations
Do not use under the following conditions because
all these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
8. Other places where similar hazardous conditions
exist
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may be
caused by the abnormal function or the failure of our
product.
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
3. Handling after unpacking:
After unpacking, reseal product promptly or
store it in a sealed container with a drying agent.
4. Storage place:
Temperature -10 to +40 degrees C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
Use this product within 6 months after delivery by
first-in and first-out stocking system.
■ Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
7
■ Notice (Soldering and Mounting) NTS Series
1. Be sure that the preheat-up does not melt the
soldering of this product. Excessive heat may
cause failure to open, short or insulation break
down.
2. Do not touch the body with soldering iron.
The soldering point should be min. 5mm away from
the root of lead wire.
32
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temperature Sensor Thermo String Type/Lead Type !Caution/Notice
■ Notice (Soldering and Mounting) NXF Series
Please notice as shown below when you mount this product.
1. When you solder this product, do not melt the solder
in resin head. If you melt the solder in resin head,
there is the possibility of breaks in the wire, shorts
and breaks of the lead insulation. In case you cut the
lead wire of this product less than 20mm from resin
head, the heat of melted solder at lead wire edge is
propagated easily to the resin head along the lead wire.
2. Do not touch the resin head directly with solder iron.
It may cause the melting of solder in resin head.
3. Do not separate the parallel lead wires 10mm or less
from the resin head, when you separate parallel lead
wires.
4. If you mold by resin this product, please evaluate
the quality before you use it.
5. Do not bend the lead wire radius 1mm or less when
you bend the lead wire.
■ Notice (Handling)
1. The ceramic element of this product is fragile,
and care must be taken not to load an excessive
press-force or not to cause a shock while handling.
Such forces may cause cracking or chipping.
2. Do not apply excessive force to the lead.
Otherwise, it may cause the junction between lead and
element to break or crack. Holding element by side lead
wire is recommended when lead wire is bent or cut.
7
33
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Temperature Sensor Thermo String Type/Lead Type Package
Minimum Order Quantity
Bulk
Ammo Pack Taping
Part Number
NXFT
Minimum Quantity (pcs.)
Part Number
Minimum Quantity (pcs.)
1,000
500
500
500
200
200
-
-
NTSA_E1B0
NTSD0
NTSA_N6A0
3,000
-
-
-
-
-
-
-
-
NTSD1_30
NTSD1_40
NTSD1_50
Taping Dimensions (NTSA_N6A0 Series)
P2
P
∆S
∆h2
∆h1
T
D
e
H2
H0
P1
ød
W2
W0
F
L
W1
W
t2
t1
I
P0
øD0
Item
Code
Dimensions (mm)
12.7
P
P0
F
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
12.7±0.3
5.0+0.8/–0.2
6.35±1.3
P2
P1
D
Length from Hole Center to Component Center
Length from Hole Center to Lead
Body Diameter
3.85±0.8
3.5 max.
∆S
W
0±2.0
Deviation along Tape, Left or Right
Carrier Tape Width
18.0±0.5
7
W1
H0
H2
I
9.0±0.5
Position of Sprocket Hole
16.0±1.0
Lead Distance between Reference and Bottom Planes
Height of Component
4.0 max.
+0.5 to –1.0
4.0±0.1
Protrusion Length
D0
d
Diameter of Sprocket Hole
Lead Diameter
0.50±0.03
0.6±0.3
t1
Total Tape Thickness
t2
1.6 max.
Total Thickness, Tape and Lead Wire
Deviation across Tape
∆h1, ∆h2
L
1.0 max.
11.0+0/–2.0
11.0 min.
1.5±1.5
Portion to Cut in Case of Defect
Hold down Tape Width
W0
W2
e
Hold down Tape Position
Coating Extension on Lead
Body Thickness
Up to the crimp point
2.6 max.
T
(in mm)
34
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
NTC Thermistors
Inrush Current Suppression Lead Type
NTPAN : 23.0 max.
NTPAJ : 20.0 max.
This product effectively suppresses surge currents
which are generated when switching power regulators
are turned on.
5.5 max.
■ Features
Coating Extension
on Lead : to line A
A
1. Lead is not contained in the ceramic element, the
terminations, the solder for inner connection or
the coating resin.
ø0.8±0.05
Sn plated Cu wire
10.0±1.5
2. Most suitable for power supplies of less than 100W
3. Excellent recovery characteristics due to resin
coating with excellent heat characteristics
4. Highly reliable
NTPAN/NTPAJ Series
NTPAD/NTPAA Series
NTPA7/NTPA9 Series
(in mm)
NTPAD : 16.0 max.
NTPAA : 12.0 max.
5.5 max.
5.0 max.
■ Applications
1. Switching power supplies
2. CRT monitors
3. Televisions
4. VCR Power supplies
5. Other power circuits
Coating Extension
on Lead : to line A
A
ø0.8±0.05
Sn plated Cu wire
7.5±1.5
(in mm)
NTPA9 : 11.0 max.
NTPA7 : 9.0 max.
5.0 max.
Coating Extension
on Lead : to line A
A
ø0.6±0.05
Sn plated Cu wire
5.0±1.5
(in mm)
Resistance
(25°C)
(ohm)
Permissible Max.
Permissible Max.
Current (55°C)
(A)
Thermal Time
Constant (25°C)
(s)
Thermal Dissipation
Constant (25°C)
(mW/°C)
8
Part Number
Current (25°C)
(A)
NTPAN3R0LDKB0
NTPAN4R0LDKB0
NTPAN6R0LDKB0
NTPAJ4R0LDKB0
NTPAJ6R0LDKB0
NTPAJ8R0LDKB0
NTPAJ100LDKB0
NTPAD3R9LDNB0
NTPAD5R1LDNB0
NTPAD8R0LDNB0
NTPAD160LDNB0
NTPAA2R2LDNB0
3.0 ±15%
4.0 ±15%
6.0 ±15%
4.0 ±15%
6.0 ±15%
8.0 ±15%
10.0 ±15%
3.9 ±15%
5.1 ±15%
8.0 ±15%
16.0 ±15%
2.2 ±15%
5.4
4.7
3.9
4.0
3.4
3.0
2.6
3.3
3.0
2.7
2.0
3.7
4.7
4.1
3.4
3.5
2.9
2.6
2.2
2.9
2.6
2.3
1.7
3.2
135
130
130
125
125
130
130
65
26.8
26.8
26.8
21.8
21.8
21.8
21.8
18.2
18.8
18.7
19.1
13.5
85
65
100
70
Continued on the following page.
35
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Continued from the preceding page.
Resistance
Permissible Max.
Current (25°C)
(A)
Permissible Max.
Current (55°C)
(A)
Thermal Time
Constant (25°C)
(s)
Thermal Dissipation
Constant (25°C)
(mW/°C)
Part Number
(25°C)
(ohm)
NTPAA3R9LDNB0
NTPAA5R1LDNB0
NTPAA8R2LDNB0
NTPAA100LDNB0
NTPA9160LBMB0
NTPA74R0LBMB0
NTPA75R0LBMB0
NTPA78R0LBMB0
NTPA7100LBMB0
NTPA7160LBMB0
NTPA7220LBMB0
3.9 ±15%
5.1 ±15%
8.2 ±15%
10.0 ±15%
16.0 ±15%
4.0 ±15%
5.0 ±15%
8.0 ±15%
10.0 ±15%
16.0 ±15%
22.0 ±15%
2.7
2.5
2.0
1.7
1.4
2.3
1.9
1.7
1.4
1.2
1.0
2.3
2.2
1.7
1.5
1.2
2.0
1.6
1.5
1.2
1.0
0.88
70
70
70
70
65
40
40
40
40
40
40
13.5
13.5
13.5
13.5
11.6
9.4
9.4
9.5
9.5
9.9
9.1
NTPAD/NTPAA/NTPA9/NTPA7 series are also availabe on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0".
Operating Temperature Range: -20°C to +160°C
■ Permissible Electrolytic Capacitor
Voltage (AC)
100Vrms
120Vrms
132Vrms
220Vrms
240Vrms
264Vrms
Part Number
NTPAN
8600µF
5000µF
2700µF
1400µF
800µF
5972µF
3472µF
1875µF
972µF
4936µF
2870µF
1550µF
803µF
1777µF
1033µF
558µF
289µF
165µF
1493µF
868µF
469µF
243µF
139µF
1234µF
717µF
387µF
201µF
115µF
NTPAJ
NTPAD
NTPAA
NTPA9
556µF
459µF
NTPA74R0
NTPA75R0
NTPA78R0
NTPA7100
NTPA7160
NTPA7220
700µF
570µF
400µF
486µF
396µF
278µF
402µF
327µF
230µF
145µF
118µF
83µF
122µF
99µF
69µF
100µF
82µF
57µF
■ Application Circuit
■ Determination of Allowable Current
1.0
NTC
−t˚
+
0.5
−
0
20
40
60
80
100
120
140
160
Ambient Temperature (˚C)
8
36
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
■ NTPAN3R0L Type
■ NTPAN4R0L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
1
0.01
1
0.01
0.1
1
10
10
10
0.01
0.1
1
10
10
10
Current (A)
Current (A)
Current (A)
Current (A)
Current (A)
Current (A)
■ NTPAN6R0L Type
■ NTPAJ4R0L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
0.01
1
0.01
0.01
1
0.1
1
0.1
1
■ NTPAJ6R0L Type
■ NTPAJ8R0L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
0.01
1
0.01
0.01
1
0.1
1
0.1
1
8
Continued on the following page.
37
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPAJ100L Type
■ NTPAD3R9L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
1
0.01
1
0.01
0.1
1
10
10
10
0.01
0.1
1
10
10
10
Current (A)
Current (A)
Current (A)
Current (A)
Current (A)
Current (A)
■ NTPAD5R1L Type
■ NTPAD8R0L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
0.01
1
0.01
0.01
1
0.1
1
0.1
1
■ NTPAD160L Type
■ NTPAA2R2L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
0.01
1
0.01
0.01
1
0.1
1
0.1
1
8
Continued on the following page.
38
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPAA3R9L Type
■ NTPAA5R1L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
1
0.01
1
0.01
0.1
1
10
0.01
0.1
1
10
Current (A)
Current (A)
■ NTPAA8R2L Type
■ NTPAA100L Type
Ta=25˚C
Ta=25°C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature
0.1
0.01
0.1
1
0.01
1
10
0.01
0.1
1
10
0.01
0.1
1
Current (A)
Current (A)
■ NTPA9160L Type
■ NTPA74R0L Type
Ta=25˚C
Ta=25°C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Resistance Ratio
Thermistor's Temperature (˚C)
Thermistor's Temperature
0.1
0.01
0.1
1
0.01
0.01
1
10
0.01
0.1
1
10
0.1
1
Current (A)
8
Current (A)
Continued on the following page.
39
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPA75R0L Type
■ NTPA78R0L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
1
0.01
1
0.01
0.1
1
10
10
10
0.01
0.1
1
10
Current (A)
Current (A)
Current (A)
Current (A)
■ NTPA7100L Type
■ NTPA7160L Type
Ta=25˚C
Ta=25˚C
10
1
1000
100
10
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.1
0.01
1
0.01
0.01
1
10
0.01
0.1
1
0.1
1
Current (A)
■ NTPA7220L Type
Ta=25˚C
10
1
1000
100
10
Resistance Ratio
Thermistor's Temperature (˚C)
0.1
0.01
0.01
1
0.1
1
8
40
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Inrush Current Suppression Lead Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
1. This product is designed for the Switching Power
Supply with smoothing capacitors.
(1) Corrosive gas or deoxidizing gas
(Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) Volatile or flammable gas
(3) Dusty conditions
Other applications of this product may result in
fire.
2. Use this product within the specified maximum
current. Otherwise it may catch fire in the worst
case.
(4) Under high or low pressure
(5) Wet or humid conditions
3. Use this product with smoothing capacitor within
the specified maximum capacitance value. Otherwise
it may catch fire in the worst case.
(6) Near with salt water, oils, chemical liquids or
organic solvents
(7) Strong vibrations
4. This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
(8) Other places where similar hazardous conditions
exist.
Do not use under the following conditions because
all of these factors can deteriorate the product
characteristics causing failure and burn-out.
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may be
caused by the abnormal function or the failure of our
product.
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
3. Handling after unpacking:
After unpacking, reseal product promptly or
store it in a sealed container with a drying agent.
4. Storage place:
Temperature -10 to +40 degrees C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
Use this product within 6 months after delivery by
first-in and first-out stocking system.
■ Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
8
■ Notice (Soldering and Mounting)
1. Be sure that the preheat-up does not melt the
soldering of this product. Excessive heat may
cause failure to open, short or insulation break
down.
2. Do not touch the body with soldering iron.
The soldering point should be min. 5mm away from
the root of lead wire.
41
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Inrush Current Suppression Lead Type !Caution/Notice
■ Notice (Handling)
1. When this product is operated, temperature of some
3. The ceramic element of this product is fragile, and
areas may be about 160 (degree C).
care must be taken not to load an excessive
press-force or give a shock at handling.
Such forces may cause cracking or chipping to the
element.
Use proper surrounding parts and material which
withstand such temperature. If they are inadequate
and kept at high temperature for a long time, they
may be deteriorated or may produce harmful gas;
such harmful gas may deteriorate the element of
this product.
4. Do not apply excessive force to the lead wire.
Otherwise, it may cause the junction between lead
and element to break or crack.
2. This product does not have waterproof construction.
Splashed water may cause failure mode such as
deterioration of characteristics or current leak.
Therefore, do not immerse it in water or any solvent.
So, fix lead wire of element side when lead wire
is bent or cut.
■ Notice (Others)
1. This product may allow passing higher current than
its initial value when it receives inrush current again
shortly after the previous one after it cools down and
sufficiently recovers its original resistance. Be sure the
highest current under actual condition remains within
the operating repetition and the operating temperature.
2. The resin coating of this product does not guarantee
insulating. Keep an adequate insulating distance to
surrounding parts.
8
42
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Inrush Current Suppression Lead Type Package
■ Minimum Order Quantity
Bulk
Ammo Pack Taping
Part Number
NTPAN_DKB0
NTPAJ_DKB0
NTPAD_DNB0
NTPAA_DNB0
NTPA9_BMB0
NTPA7_BMB0
Minimum Quantity (pcs.)
Part Number
Minimum Quantity (pcs.)
50
-
-
100
150
300
300
500
-
-
NTPAD_D6A0
NTPAA_D6A0
NTPA9_B1A0
NTPA7_B1A0
400
750
1,000
1,000
■ Taping Dimensions (NTPAD/NTPAA_D6A0 Series)
∆S
P2
D
P
∆h1
∆h2
T
A
P1
F
d
P0
Item
Code
Dimensions (mm)
30.0
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
P
P0
F
15.0±0.3
7.5±0.5
Length from Hole Center to Component Center
Length from Hole Center to Lead
Body Diameter
P2
P1
D
7.5±1.5
3.75±1.0
(refer to the table below)
(refer to the table below)
±2.0
Body Thickness
T
Deviation Along Tape, Left or Right
Carrier Tape Width
∆S
W
18.0±0.5
Position of Sprocket Hole
W1
H0
H2
I
9.0±0.5
Lead Distance between Reference and Bottom Plane
Height of Component
16.0±0.5
10.0 max.
W0.5 to Y6.0
4.0±0.1
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
D0
d
0.8±0.05
Total Tape Thickness
t1
0.6±0.3
Total Thickness, Tape and Lead Wire
Deviation Across Tape
t2
2.0 max.
8
∆h1, ∆h2
L
2.0 max.
+0
–2.0
Portion to Cut in Case of Defect
Hold down Tape Width
11.0
W0
W2
e
11.5 min.
4.0 max.
to line A
Hold down Tape Position
Coating Extension on Lead
Type
NTPAD
NTPAA
D (mm)
16.0 max.
12.0 max.
T (mm)
5.5 max.
5.0 max.
Continued on the following page.
43
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has onlytypicalspecificationsbecausethereisnospacefordetailedspecifications. Therefore, pleasereviewourproductspecificationsorconsulttheapprovalsheetforproduct specificationsbeforeordering.
!Note
R44E.pdf
Feb.21,2011
Inrush Current Suppression Lead Type Package
Continued from the preceding page.
■ Taping Dimensions (NTPA9/NTPA7_B1A0 Series)
∆S
P2
P
∆h1
∆h2
D
T
A
P1
F
d
P0
Item
Code
P
Dimensions (mm)
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
12.7
P0
F
12.7±0.3
+0.8
5.0
–0.3
Length from Hole Center to Component Center
Length from Hole Center to Lead
Body Diameter
P2
P1
D
6.35±1.3
3.85±0.8
(refer to the table below)
5.0 max.
Body Thickness
T
Deviation Along Tape, Left or Right
Carrier Tape Width
∆S
W
W1
H0
H2
I
±1.5
18.0±0.5
+0.5
–0.75
Position of Sprocket Hole
9.0
Lead Distance between Reference and Bottom Planes
Height of Component
16.0±1.0
6.0 max.
W0.5 to Y4.0
4.0±0.3
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
D0
d
0.6±0.05
0.6±0.3
Total Tape Thickness
t1
Total Thickness, Tape and Lead Wire
Deviation Across Tape
t2
2.0 max.
∆h1, ∆h2
1.5 max.
+0
Portion to Cut in Case of Defect
Hold down Tape Width
L
11.0
–2.0
W0
W2
e
11.0 min.
4.0 max.
to line A
Hold down Tape Position
Coating Extension on Lead
Type
NTPA9
NTPA7
D (mm)
11.0 max.
9.0 max.
8
44
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
R44E.pdf
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Feb.21,2011
相关型号:
©2020 ICPDF网 联系我们和版权申明