PFWCC450KS2A-R0 [MURATA]
Ceramic BPF, 0.45MHz;型号: | PFWCC450KS2A-R0 |
厂家: | muRata |
描述: | Ceramic BPF, 0.45MHz |
文件: | 总2页 (文件大小:46K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
P50E.pdf 03.4.16
CERAFILr (Filters/ Traps/ Discriminators) for Audio/ Visual Equipment
CERAFILr 455kHz Chip Type PFWCC Series
1.2±0.2
1.2±0.2
Input Mark
GND
PFWCC series for AM use is one of the most
recommendable intermediate filters, having such
distinctive features as high selectivity, high
stability, and adjustment-free operation.
IN
(2)
(3)
Additionally its easy matching with IC helps create an
(1)
(4)
OUT
GND
easy circuit design.
4.0±0.2
5.7±0.3
This is the most recommendable for portable radio with
small package. Especially, reflowable with SMD package.
(in mm)
■ Features
1. Center frequency range between 450 and 470 kHz
are available standard tolerance of +-2 kHz.
2. For frequency synthesizers, center frequencies
of 450, 459 and 468 kHz are available standard
tolerance of +-1 kHz.
Center
Frequency (fo)
(kHz)
Input/Output
Impedance
(ohm)
3dB Bandwidth
(kHz)
Selectivity (+)
Selectivity (-)
(dB)
Insertion Loss
(dB)
Part Number
Element
(dB)
PFWCC450KS2A-R0
450 ±2.0kHz
5.5 ±1.5kHz
17 min.[fo+9kHz]
17 min.[fo-9kHz]
6.0 max.
3000
2
16
Insertion Loss: at minimum loss point
Center frequency (fo) is defined by the center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
■ Standard Land Pattern Dimensions
6.0
4.0
1.2
1.2
(in:mm)
The solder resist should be printed except for the land
pattern on the P.C.B..
The material of P.C.B. is the epoxy resin of glass fabric
base (t=0.8mm)
51
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
P50E.pdf 03.4.16
■ Recommended IFT
Type
7×7mm IFT
5×5mm IFT
Item
(1)—(2)
85T
(2)—(3)
(4)—(6)
23T
(1)—(2)
84T
(2)—(3)
(4)—(6)
33T
Winding Specification
S(3)
(4)S
(6)
(2)
(1)
67T
98T
(Bottom view)
No load Qu
90
65
Tuning Capacitance
180pF
180pF
• Maching of CERAFILrPFWLA series with IFT is decided by the IFT secondary side
impedance, |Z2|. Set the |Z2| at about 4.2kΩ.
■ Test Circuit (CERAFILr Only)
■ Test Circuit (CERAFILr with IFT)
7pF
3kΩ
(1)
(2)
(3)
(1)
(4)
(2)
(3)
IFT
(4)
(4)
300kΩ
(3)
(2)
S.S.G.
(Rg=50Ω)
RF
Voltmeter
RF
Voltmeter
S.S.G.
(Rg=50Ω)
(1)
(6)
16
■ Frequency Characteristics
■ Frequency Characteristics (Spurious)
IFT+PFWCC450KS2A-R0
IFT+PFWCC450KS2A-R0
0
0
10
20
10
20
30
40
50
30
40
50
60
70
60
70
0.000
1.000
2.000
3.000
4.000
430
440
450
460
470
Frequency (kHz)
Frequency (kHz)
52
相关型号:
PFZ15A
1500W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-27, PLASTIC, DO-27A, CB-197, 2 PIN
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明