PLY10AS4321R0R2M [MURATA]
300V, SINGLE PHASE EMI FILTER,;
| 型号： | PLY10AS4321R0R2M |
| 厂家： | 
muRata |
| 描述： | 300V, SINGLE PHASE EMI FILTER, LTE |
| 文件： | 总3页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Hybrid Choke Coils
1
Data Sheet
AC Line Filters
Hybrid Choke Coils
PLY10 Series (Safety Standard Recognized)
PLY10 Series (Safety Standard Recognized) Standard Winding Type
Dimensions
c
c
c
16 max.
18 max.
ø±.9 max.
13±±.5
1±±±.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
Common Mode Insertion Loss-Frequency Characteristics
Differential Mode Insertion Loss-Frequency Characteristics
c
±
±
PLY1±AS9±12R±R2
PLY1±AS1121R8R2
PLY1±AS1521R6R2
PLY1±AS9±12R±R2
PLY1±AS1121R8R2
PLY1±AS1521R6R2
2±
PLY1±AS2121R4R2
2±
4±
4±
PLY1±AS2121R4R2
PLY1±AS2821R2R2
PLY1±AS4321R±R2
PLY1±AS2821R2R2
PLY1±AS622±R8R2
PLY1±AS4321R±R2
PLY1±AS622±R8R2
PLY1±AS872±R7R2
PLY1±AS992±R6R2
PLY1±AS143±R5R2
6±
6±
8±
PLY1±AS872±R7R2
PLY1±AS992±R6R2
PLY1±AS143±R5R2
8±
±.±1
±.1
1
1±
1±±
±.±1
±.1
1
1±
1±±
Frequency (MHz)
Frequency (MHz)
Rated Value ( : packaging code)
p
Part Number
Common Mode Inductance (min.)
Normal Mode Inductance (min.)
Rated Current
Rated Voltage
PLY10AS9012R0R2
PLY10AS1121R8R2
PLY10AS1521R6R2
PLY10AS2121R4R2
PLY10AS2821R2R2
PLY10AS4321R0R2
PLY10AS6220R8R2
PLY10AS8720R7R2
PLY10AS9920R6R2
PLY10AS1430R5R2
0.9mH
1.1mH
1.5mH
2.1mH
2.8mH
4.3mH
6.2mH
8.7mH
9.9mH
14.0mH
65µH
90µH
2.0A
1.8A
1.6A
1.4A
1.2A
1.0A
0.8A
0.7A
0.6A
0.5A
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
p
p
p
p
p
p
p
p
p
p
110µH
150µH
190µH
300µH
400µH
530µH
690µH
1000µH
Operating Temperature Range: -25°C to 60°C
Winding Temperature Rise (at Rated Current): 60°C (max.)
Continued on the following page.
oThis data sheet is applied for AC Line Filters Hybrid Choke Coils used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Hybrid Choke Coils
2
Data Sheet
Continued from the preceding page.
PLY10 Series (Safety Standard Recognized) Sectional Winding Type
Dimensions
c
c
c
16 max.
18 max.
ø±.9 max.
13±±.5
1±±±.5
(1)
(4)
(4)
[(1)]
(3)
[(2)]
[(3)]
[(2)]
(in mm)
Common Mode Insertion Loss-Frequency Characteristics
Differential Mode Insertion Loss-Frequency Characteristics
c
±
±
PLY1±AS7±12R±D2
PLY1±AS1121R7D2
PLY1±AS1421R4D2
PLY1±AS7±12R±D2
PLY1±AS1121R7D2
PLY1±AS1421R4D2
PLY1±AS2321R2D2
PLY1±AS3521R±D2
PLY1±AS442±R8D2
2±
2±
PLY1±AS2321R2D2
4±
4±
PLY1±AS3521R±D2
PLY1±AS442±R8D2
PLY1±AS872±R7D2
PLY1±AS972±R6D2
6±
PLY1±AS113±R5D2
6±
8±
PLY1±AS872±R7D2
PLY1±AS972±R6D2
PLY1±AS113±R5D2
8±
±.±1
±.1
1
1±
1±±
±.±1
±.1
1
1±
1±±
Frequency (MHz)
Frequency (MHz)
Rated Value ( : packaging code)
p
Part Number
Common Mode Inductance (min.)
Normal Mode Inductance (min.)
Rated Current
Rated Voltage
PLY10AS7012R0D2
PLY10AS1121R7D2
PLY10AS1421R4D2
PLY10AS2321R2D2
PLY10AS3521R0D2
PLY10AS4420R8D2
PLY10AS8720R7D2
PLY10AS9720R6D2
PLY10AS1130R5D2
0.7mH
1.1mH
1.4mH
2.3mH
3.5mH
4.4mH
8.7mH
9.7mH
11.0mH
50µH
65µH
2.0A
1.7A
1.4A
1.2A
1.0A
0.8A
0.7A
0.6A
0.5A
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
300Vac
p
p
p
p
p
p
p
p
p
110µH
160µH
240µH
320µH
500µH
670µH
840µH
Operating Temperature Range: -25°C to 60°C
Winding Temperature Rise (at Rated Current): 60°C (max.)
Continued on the following page.
oThis data sheet is applied for AC Line Filters Hybrid Choke Coils used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Hybrid Choke Coils
3
Data Sheet
Continued from the preceding page.
Equivalent Circuit
Packaging
c
c
Code
Packaging
Magazine
Box
Minimum Quantity
M
1800
1200
Differential Mode Inductor
(2)
B
(1)
(4)
(3)
Common Mode Inductor
No polarity.
Caution (Rating)
Notice (Soldering and Mounting)
c
Magnetic Flux Leakage
c !
1. Rated Current
Operating current should not exceed the rated
value. Even if operating current is under the
rated value, adequate ventilation is required to
avoid excessive heat generated within the product
(choke coil) and from surrounding heat sources.
If exceeding these conditions, excessive heat may
cause fumes or permanent damage to the product.
Please ensure that product (choke coil) is
evaluated and confirmed against the specification
when it is mounted in your final assembled product.
-> Winding temperature should be less than
120 degree C.
*As for FKOB series winding temperature should be
less than 95 degree C.
Maximum allowable temperature at the surface of
coil (ambient temperature + winding temperature
rise) is in accordance with each safety standard
applicable to final assembled product.
Choke coils generate small amounts of magnetic flux
leakage that may adversely affect equipment operation
according to component arrangement.
Testing should be completed on final assembly to
ensure equipment performance is not affected.
Notice (Other)
Coil Humming Noise
c
Magnetic flux generated between coil and core or
between the choke coil windings creates repulsive
power between the coil windings. This repulsive
power causes the coil winding to vibrate and create
a humming noise. The amount of hum produced by the
coil is proportionate to the amount of harmonic
distortion generated by the operating current. This
does not influence the electrical performance of
the coils, but it should be considered and tested
in actual circuit application.
When the temperature at winding exceeds maximum
allowable temperature of safety standard, the
rated current should be derated.
2. Inrush Current
Inrush current should not exceed 10 times rated
current within 1/4 cycle of 50/60Hz commercial
power line. Inrush current should be limited to a
minimum of 10 seconds after last inrush.
If these conditions are exceeded, excessive heat may
cause fumes or permanent damage to the component,
or at worst cause ignition.
oThis data sheet is applied for AC Line Filters Hybrid Choke Coils used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
相关型号：
©2020 ICPDF网 联系我们和版权申明