PLY10BN1522R0R2M [MURATA]
EMI Suppression Filters for AC Power Lines; EMI静噪滤波器AC电源线型号: | PLY10BN1522R0R2M |
厂家: | muRata |
描述: | EMI Suppression Filters for AC Power Lines |
文件: | 总24页 (文件大小:490K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C09E.pdf
06.2.9
EMI Suppression Filters
(EMIFILr)
for AC Power Lines
Mu ra ta
Ma nu fa cturin g Co., Ltd .
Cat.No.C09E-11
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
1
CONTENTS
EMIFILr in this catalog is the trademark of Murata Manufacturing Co., Ltd.
Part Numbering
2
3
2
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
1
Common Mode Choke Coil
5
FKOB Series
5
PLA10 Series Standard Winding Type
PLA10 Series Sectional Winding Type
PLA10 Series (Safety Standard Recognized) Standard Winding Type
PLA10 Series (Safety Standard Recognized) Sectional Winding Type
PLH10 Series
6
6
8
8
10
11
12
12
12
14
14
16
16
18
18
20
21
22
PLH10 Series (Safety Standard Recognized)
Hybrid Choke Coil
2
PLY10 Series Standard Winding Type
PLY10 Series Sectional Winding Type
PLY10 Series (Safety Standard Recognized) Standard Winding Type
PLY10 Series (Safety Standard Recognized) Sectional Winding Type
PLY17 Series A Type
PLY17 Series B Type
PLY17 Series (Safety Standard Recognized) A Type
PLY17 Series (Safety Standard Recognized) B Type
Noise Suppression Effect of PLY10 Series
!Caution /Notice
Packaging
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
o Part Numbering
AC Line Filters
(Part Number)
R
2
B
PL
A
10
A
S
152 2R0
q
w
e
r
t
y
u
i
o
!
qProduct ID
yInductance
Expressed by three figures. The unit is micro-henry (µH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits. If inductance is less
than 0.1 µH, the inductance code is expressed by a combination
of two figures and capital letter "N", and the unit of inductance is
nano-henry (nH). The capital letter "N" indicates the unit of "nH",
and also expresses a decimal point. In this case, all figures are
significant digits.
Product ID
PL
Common Mode Choke Coils
wType
Code
A
Type
AC Standard Type
H
AC High-frequency Type
AC Hybrid Choke Coils Type
Y
eApplications
uRated Current
Expressed by three figures. The unit is in amperes (A). A decimal
point is expressed by the capital letter "R". In this case, all figures
are significant digits.
Code
10
Applications
for AC Line
17
iWinding Mode
rStructure
Code
A
Winding Mode
Parallel Winding Type
Code
A
Structure
Core Vertical Type
Core Horizontal Type
B
Parallel Winding Type (High Performance Type)
Sectional Winding Type
B
D
R
Standard Type
tFeatures
P
Single Layer Winding Type
Code
S
Features
Safety Recognized
General Use
oLead Dimensions
N
Code
Lead Dimensions
2
3.5mm
!Packaging
Code
B
Packaging
Bulk
Series
All series
M
Magazine Package
• Please contact us for FKOB series.
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
EMI (Electro Magnetic Interference) suppression filter for AC
power lines eliminate noise entering equipment from
commercial power lines or noise generated from electronic
equipment.
performance of total filter block MURATA provides two types
of common mode chokes. (Standard type, High frequency
type)
Hybrid choke coil is high performance EMI suppression
device which can suppress both common mode noise and
differential mode noise at the same time. It is effective in AC
power supplies with active device for higher harmonic
countermeasure, which tend to emit relatively higher
differential mode noise.
Common mode chokes, line bypass capacitors, across the
line capacitors are generally used as AC EMI suppression
filter device. In suppressing common mode noise, common
mode chokes are most important devices. Because the
characteristics of common mode chokes influences
■ Classification of EMI Suppression Filter for AC Power Lines
Effective Frequency Range (Hz)
Product Name
Appearance
Application
10k 100k 1M 10M 100M 1G
Common Mode Choke Coil
Standard Type
Suppression of general
common mode noise
PLA10
FKOB
High Frequency Type
Suppression of common mode
noise contains high frequency
noise above 10MHz
PLH10
Hybrid Choke Coil
Suppression of conduction
noise in AC power line with
active device for higher
harmonic countermeasure.
Suppression of AC power line
noise which contains both
common mode noise and
differential mode noise.
PLY10
Hybrid Choke Coil
For AC power supply,
AC adaptor.
Set for low profile equipment.
PLY17
3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
■ Common Mode Choke Coil Standard Winding and Sectional Winding
Standard Winding
End of Winding
Standard Winding
36 35 34 33 32 31 30 29 28
Large inductance is available
→Highly Efficient in Low Frequency
19 20 21 22 23 24 25 26 27
18 17 16 15 14 13 12 11 10
1
2 3 4 5 6 7 8 9
Sectional Winding
Excellent performance in high frequency
Beginning of Winding
Stray capacity between windings is low
High-frequency noise can pass through the
Filter easily because both edges of coils are
close as shown above
0
20
40
Sectional Winding
End of Winding
(Standard Winding)
16 15 14 13 32 31 30 29
9
8
1
10 11 12 25 26 27 28
7
2
6
3
5
4
24 23 22 21
17 18 19 20
(Sectional Winding)
60
80
Beginning of Winding
High-frequency noise can hardly pass
through the Filter because both edges
of coil are not close as shown above
0.01
0.1
1
10
100
Frequency (MHz)
■ Noise Measures for Switching Power Supply
Common Mode Choke Coil
suppresses Common
Mode Noise
Line Bypass Capacitor
(Y Capacitor) suppresses
Common Mode Noise
Differential Mode Choke Coil
suppresses Differential Mode Noise
Common Mode Noise
Differential Mode Noise
Noise are generated from
Switching Power Supply
Switching
Load
Power Supply
PLA10/PLH10
Across the Line Capacitor
(X Capacitor) suppresses
Differential Mode Noise
Differential Mode Choke Coil
suppresses Differential Mode
Noise
Across the Line Capacitor
(X Capacitor) suppresses
Differential Mode Noise
4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
1
EMI Suppression Filters (EMIFILr) for AC Power Lines
Common Mode Choke Coil
FKOB Series
The FKOB series is compact size AC common mode choke
coil which uses troidal type ferrite core.
Its broad band frequency characteristic enables simple
filter composition in relative low noise equipments.
ø23 max.
10±0.5
(in mm)
FKOB160MH02/25/23/26/24
ø23 max.
10±0.5
(in mm)
FKOB160MH06/13/14/16/15
Common Mode Inductance
Insulation Resistance
(min.)
Rated Current
(A)
Rated Voltage
(V)
Part Number
(min.)
(µH)
(M ohm)
FKOB160MH02
FKOB160MH06
FKOB160MH13
FKOB160MH25
FKOB160MH14
FKOB160MH23
FKOB160MH16
FKOB160MH26
FKOB160MH15
FKOB160MH24
250
250
2.5
2.5
2.5
2.5
2.5
2.5
1.5
1.5
1.5
1.5
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
600
600
800
800
1000
1000
1500
1500
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -20°C to 95°C
Winding Temperature Rise (at Rated Current) (max.): 35K
■ Equivalent Circuit Diagram
■ Insertion Loss-Frequency Characteristics
0
10
02, 06
20
13, 14, 23, 25
(1)
(2)
N1
30
16, 26
N1 : N2 = 1 : 1
40
15, 24
50
60
70
N2
(4)
(3)
0.1
0.5
1
5
10
50 100
Frequency (MHz)
5
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
1
PLA10 Series
16 max.
18 max.
The PLA10 series is a compact size AC common mode
choke coil. It can obtain a high inductance value in
spite of its compact size.
■ Features
1. Compact and light weight
2. Low profile in vertical core layout
3. Both a standard winding type and a sectional
winding type for higher frequency noise are
available.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
[(1)]
(3)
Standard Winding Type
[(2)]
[(3)]
[(2)]
(in mm)
18 max.
16 max.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
Sectional Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
Insulation Resistance
(min.)
Rated Current
(A)
Rated Voltage
(V)
Part Number
(min.)
(mH)
(M ohm)
PLA10AN1522R0R2
PLA10AN1821R7R2
PLA10AN2221R5R2
PLA10AN3021R3R2
PLA10AN3521R2R2
PLA10AN5521R0R2
PLA10AN7420R8R2
PLA10AN1030R7R2
PLA10AN1230R6R2
PLA10AN2030R5R2
PLA10AN3030R4R2
PLA10AN4330R3R2
1.5
1.8
2.0
1.7
1.5
1.3
1.2
1.0
0.8
0.7
0.6
0.5
0.4
0.3
300
300
300
300
300
300
300
300
300
300
300
300
100
100
100
100
100
100
100
100
100
100
100
100
2.2
3.0
3.5
5.5
7.4
10.0
12.0
20.0
30.0
43.0
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
Insulation Resistance
Rated Voltage
Rated Current
Part Number
(min.)
(mH)
(min.)
(A)
(V)
(M ohm)
PLA10AN9012R0D2
PLA10AN1321R7D2
PLA10AN1821R5D2
PLA10AN2021R3D2
PLA10AN3621R0D2
PLA10AN7720R7D2
PLA10AN1330R5D2
PLA10AN2230R4D2
PLA10AN3630R3D2
0.9
1.3
2.0
1.7
1.5
1.3
1.0
0.7
0.5
0.4
0.3
300
300
300
300
300
300
300
300
300
100
100
100
100
100
100
100
100
100
1.8
2.0
3.6
7.7
13.0
22.0
36.0
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
6
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
■ Equivalent Circuit Diagram
1
(1)
(4)
(2)
N1
N2
N1 : N2 = 1 : 1
(3)
■ Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
20
40
0
PLA10AN1522R0R2
PLA10AN1821R7R2
PLA10AN2221R5R2
PLA10AN3021R3R2
PLA10AN9012R0D2
PLA10AN1321R7D2
PLA10AN1821R5D2
PLA10AN2021R3D2
PLA10AN3521R2R2
20
PLA10AN5521R0R2
40
PLA10AN7420R8R2
PLA10AN1030R7R2
PLA10AN1230R6R2
PLA10AN2030R5R2
PLA10AN3030R4R2
PLA10AN4330R3R2
PLA10AN3621R0D2
PLA10AN7720R7D2
PLA10AN1330R5D2
PLA10AN2230R4D2
PLA10AN3630R3D2
60
80
60
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
7
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
1
PLA10 Series (Safety Standard Recognized)
16 max.
18 max.
■ Features
1. Compact and light weight
2. Low profile in vertical core layout
3. Both a standard winding type and a sectional
winding type for higher frequency noise are
available.
4. Safety standards: EN60065
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
[(1)]
(3)
■ Applications
Standard Winding Type
[(2)]
[(3)]
[(2)]
Noise suppression of AC power lines
(in mm)
18 max.
16 max.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
Sectional Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
Insulation Resistance
(min.)
Rated Current
(A)
Rated Voltage
(V)
Part Number
(min.)
(mH)
(M ohm)
PLA10AS1522R0R2
PLA10AS1821R7R2
PLA10AS2221R5R2
PLA10AS3021R3R2
PLA10AS3521R2R2
PLA10AS5521R0R2
PLA10AS7420R8R2
PLA10AS1030R7R2
PLA10AS1230R6R2
PLA10AS2030R5R2
PLA10AS3030R4R2
PLA10AS4330R3R2
1.5
1.8
2.0
1.7
1.5
1.3
1.2
1.0
0.8
0.7
0.6
0.5
0.4
0.3
250
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
100
100
100
2.2
3.0
3.5
5.5
7.4
10.0
12.0
20.0
30.0
43.0
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
Insulation Resistance
(min.)
Rated Current
(A)
Rated Voltage
(V)
Part Number
(min.)
(mH)
(M ohm)
PLA10AS9012R0D2
PLA10AS1321R7D2
PLA10AS1821R5D2
PLA10AS2021R3D2
PLA10AS3621R0D2
PLA10AS7720R7D2
PLA10AS1330R5D2
PLA10AS2230R4D2
PLA10AS3630R3D2
0.9
1.3
2.0
1.7
1.5
1.3
1.0
0.7
0.5
0.4
0.3
250
250
250
250
250
250
250
250
250
100
100
100
100
100
100
100
100
100
1.8
2.0
3.6
7.7
13.0
22.0
36.0
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) (max.): 60K
8
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
■ Equivalent Circuit Diagram
1
(1)
(4)
(2)
N1
N2
N1 : N2 = 1 : 1
(3)
■ Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
20
40
0
PLA10AS9012R0D2
PLA10AS1321R7D2
PLA10AS1821R5D2
PLA10AS2021R3D2
PLA10AS3621R0D2
PLA10AS7720R7D2
PLA10AS1522R0R2
PLA10AS1821R7R2
PLA10AS2221R5R2
PLA10AS3021R3R2
PLA10AS3521R2R2
PLA10AS5521R0R2
20
40
PLA10AS7420R8R2
PLA10AS1030R7R2
PLA10AS1230R6R2
PLA10AS2030R5R2
PLA10AS3030R4R2
PLA10AS4330R3R2
60
80
60
80
PLA10AS1330R5D2
PLA10AS2230R4D2
PLA10AS3630R3D2
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
9
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
1
PLH10 Series
16 max.
18 max.
The PLH10 series is a common mode choke coil for high
frequency use. The same dimensions as the PLA10 series
enables flexible design.
■ Features
1. High performance in high frequency range
2. Low profile in vertical core layout
3. Compact and light weight
ø0.9 max.
10±0.5
13±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
Common Mode Inductance
Insulation Resistance
(min.)
Rated Current
(A)
Rated Voltage
(V)
Part Number
(min.)
(µH)
(M ohm)
PLH10AN7003R6P2
PLH10AN1112R6P2
PLH10AN1612R1P2
PLH10AN2211R5P2
PLH10AN2911R2P2
PLH10AN3711R0P2
70
3.6
2.6
2.1
1.5
1.2
1.0
300
300
300
300
300
300
100
100
100
100
100
100
110
160
220
290
370
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
■ Equivalent Circuit Diagram
■ Insertion Loss-Frequency Characteristics
0
PLH10AN7003R6P2
10
20
PLH10AN1112R6P2
PLH10AN1612R1P2
(1)
(2)
N1
N1 : N2 = 1 : 1
30
40
50
PLH10AN2211R5P2
PLH10AN2911R2P2
PLH10AN3711R0P2
N2
(4)
(3)
0.1
1.0
10
Frequency (MHz)
100
1000
10
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
1
PLH10 Series (Safety Standard Recognized)
16 max.
18 max.
■ Features
1. High performance in high frequency range
2. Low profile in vertical core layout
3. Compact and light weight
4. Safety standards: EN60065
■ Applications
ø0.9 max.
10±0.5
13±0.5
Suppressing radiation noise in switching power
(1)
(4)
(4)
(3)
supply and inverter (AC-AC converter)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
Common Mode Inductance
Insulation Resistance
(min.)
Rated Current
(A)
Rated Voltage
(V)
Part Number
(min.)
(µH)
(M ohm)
PLH10AS7003R6P2
PLH10AS1112R6P2
PLH10AS1612R1P2
PLH10AS2211R5P2
PLH10AS2911R2P2
PLH10AS3711R0P2
70
3.6
2.6
2.1
1.5
1.2
1.0
250
250
250
250
250
250
100
100
100
100
100
100
110
160
220
290
370
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) (max.): 60K
■ Equivalent Circuit Diagram
■ Insertion Loss-Frequency Characteristics
0
PLH10AS7003R6P2
10
20
PLH10AS1112R6P2
PLH10AS1612R1P2
(1)
(2)
N1
N1 : N2 = 1 : 1
30
40
50
PLH10AS2211R5P2
PLH10AS2911R2P2
PLH10AS3711R0P2
N2
(4)
(3)
0.1
1.0
10
Frequency (MHz)
100
1000
11
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
EMI Suppression Filters (EMIFILr) for AC Power Lines
Hybrid Choke Coil
2
PLY10 Series
16 max.
18 max.
The PLY10 is a compact and high performance hybrid
choke coil which can handle differential mode noise
caused by the harmonics currents regulation circuit as
well as common mode noise. It can handle noise
problems much more compactly than a combination of a
conventional common mode choke coil and a differential
mode choke coil.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
■ Features
Standard Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
1. PLY10 has both functions of a common mode choke
coil and a differential mode choke coil in its
compact body.
(in mm)
2. Low profile in vertical core layout
16 max.
18 max.
3. PLY10 has the same pin layout as a general type
common mode choke coil which enables it to replace
conventional components.
4. Both a standard winding type and a sectional winding
type for higher frequency noise are available.
■ EMI Problem for harmonics currents regulation
There are some methods meet harmonics currents
regulations (IEC1000-3, EN60555-2) such as an active
filter type and one converter type. However, they
cause new EMI problems of differential mode noise
because they use active components. For that reason,
additional filter components to meet differential mode
noise must be applied.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
Sectional Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
(Vac)
Part Number
(min.)
(mH)
(min.)
(µH)
PLY10AN9012R0R2
PLY10AN1121R8R2
PLY10AN1521R6R2
PLY10AN2121R4R2
PLY10AN2821R2R2
PLY10AN4321R0R2
PLY10AN6220R8R2
PLY10AN8720R7R2
PLY10AN9920R6R2
PLY10AN1430R5R2
0.9
1.1
1.5
2.1
2.8
4.3
6.2
8.7
9.9
14.0
65
90
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.7
0.6
0.5
300
300
300
300
300
300
300
300
300
300
110
150
190
300
400
530
690
1000
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
Part Number
(min.)
(mH)
(min.)
(Vac)
(µH)
PLY10AN7012R0D2
PLY10AN1121R7D2
PLY10AN1421R4D2
0.7
1.1
1.4
50
65
2.0
1.7
1.4
300
300
300
110
Continued on the following page.
12
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
Continued from the preceding page.
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
(Vac)
Part Number
(min.)
(mH)
(min.)
(µH)
PLY10AN2321R2D2
PLY10AN3521R0D2
PLY10AN4420R8D2
PLY10AN8720R7D2
PLY10AN9720R6D2
PLY10AN1130R5D2
PLY10AN2430R4D2
2.3
3.5
160
240
320
500
670
840
1800
1.2
1.0
0.8
0.7
0.6
0.5
0.4
300
300
300
300
300
300
300
4.4
8.7
9.7
11.0
24.0
2
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
■ Equivalent Circuit Diagram
Differential Mode Inductor
(1)
(2)
(4)
(3)
Common Mode Inductor
■ Common Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
PLY10AN9012R0R2
PLY10AN1121R8R2
PLY10AN1521R6R2
PLY10AN7012R0D2
PLY10AN1121R7D2
PLY10AN1421R4D2
PLY10AN2321R2D2
PLY10AN3521R0D2
PLY10AN2121R4R2
20
40
20
40
PLY10AN2821R2R2
PLY10AN4321R0R2
PLY10AN6220R8R2
PLY10AN8720R7R2
PLY10AN9920R6R2
PLY10AN1430R5R2
PLY10AN4420R8D2
60
60
80
PLY10AN8720R7D2
PLY10AN9720R6D2
PLY10AN1130R5D2
PLY10AN2430R4D2
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
20
40
PLY10AN9012R0R2
PLY10AN1121R8R2
PLY10AN1521R6R2
PLY10AN7012R0D2
PLY10AN1121R7D2
PLY10AN1421R4D2
PLY10AN2321R2D2
20
40
PLY10AN3521R0D2
PLY10AN2121R4R2
PLY10AN2821R2R2
PLY10AN4321R0R2
PLY10AN4420R8D2
PLY10AN8720R7D2
PLY10AN9720R6D2
PLY10AN1130R5D2
PLY10AN2430R4D2
PLY10AN6220R8R2
60
60
80
PLY10AN8720R7R2
PLY10AN9920R6R2
PLY10AN1430R5R2
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
13
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
PLY10 Series (Safey Standard Recognized)
16 max.
18 max.
The PLY10 is a compact and high performance hybrid
choke coil which can handle differential mode noise
caused by the harmonics currents regulation circuit as
well as common mode noise. It can handle noise
problems much more compactly than a combination of a
conventional common mode choke coil and a differential
mode choke coil.
2
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
■ Features
Standard Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
1. PLY10 has both functions of a common mode choke
coil and a differential mode choke coil in its
compact body.
(in mm)
2. Low profile in vertical core layout
3. PLY10 has the same pin layout as a general type
common mode choke coil which enables it to replace
conventional components.
16 max.
18 max.
4. Safety standards: EN60065
■ EMI Problem for harmonics currents regulation
There are some methods meet harmonics currents
regulations (IEC1000-3, EN60555-2) such as an active
filter type and one converter type. However, they
cause new EMI problems of differential mode noise
because they use active components. For that reason,
additional filter components to meet differential mode
noise must be applied.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
Sectional Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
(Vac)
Part Number
(min.)
(mH)
(min.)
(µH)
PLY10AS9012R0R2
PLY10AS1121R8R2
PLY10AS1521R6R2
PLY10AS2121R4R2
PLY10AS2821R2R2
PLY10AS4321R0R2
PLY10AS6220R8R2
PLY10AS8720R7R2
PLY10AS9920R6R2
PLY10AS1430R5R2
0.9
1.1
1.5
2.1
2.8
4.3
6.2
8.7
9.9
14.0
65
90
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.7
0.6
0.5
300
300
300
300
300
300
300
300
300
300
110
150
190
300
400
530
690
1000
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
Part Number
(min.)
(mH)
(min.)
(Vac)
(µH)
PLY10AS7012R0D2
PLY10AS1121R7D2
PLY10AS1421R4D2
PLY10AS2321R2D2
PLY10AS3521R0D2
PLY10AS4420R8D2
PLY10AS8720R7D2
PLY10AS9720R6D2
PLY10AS1130R5D2
PLY10AS2430R4D2
0.7
1.1
50
65
2.0
1.7
1.4
1.2
1.0
0.8
0.7
0.6
0.5
0.4
300
300
300
300
300
300
300
300
300
300
1.4
110
160
240
320
500
670
840
1800
2.3
3.5
4.4
8.7
9.7
11.0
24.0
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
14
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
■ Equivalent Circuit Diagram
Differential Mode Inductor
(1)
(2)
2
(4)
(3)
Common Mode Inductor
■ Common Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
20
40
PLY10AS7012R0D2
PLY10AS1121R7D2
PLY10AS1421R4D2
PLY10AS2321R2D2
PLY10AS3521R0D2
PLY10AS4420R8D2
PLY10AS9012R0R2
PLY10AS1121R8R2
PLY10AS1521R6R2
PLY10AS2121R4R2
20
40
PLY10AS2821R2R2
PLY10AS4321R0R2
PLY10AS6220R8R2
PLY10AS8720R7R2
PLY10AS9920R6R2
PLY10AS1430R5R2
60
80
60
80
PLY10AS8720R7D2
PLY10AS9720R6D2
PLY10AS1130R5D2
PLY10AS2430R4D2
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
20
40
PLY10AS9012R0R2
PLY10AS1121R8R2
PLY10AS1521R6R2
PLY10AS7012R0D2
PLY10AS1121R7D2
PLY10AS1421R4D2
20
PLY10AS2321R2D2
PLY10AS3521R0D2
PLY10AS4420R8D2
PLY10AS8720R7D2
PLY10AS9720R6D2
PLY10AS1130R5D2
PLY10AS2430R4D2
40
PLY10AS2121R4R2
PLY10AS2821R2R2
PLY10AS4321R0R2
PLY10AS6220R8R2
60
60
80
PLY10AS8720R7R2
PLY10AS9920R6R2
PLY10AS1430R5R2
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
15
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
PLY17 Series
22.5±0.5
■ Features
1. Integration of choke coil function to suppress
differential mode/Low and High Frequency common
mode noise.
2. Low Profile (H=<13mm)
2
■ Applications
1. For AC power supply, AC adapter
ø1.0 max.
(1)
[(2)]
(4)
[(3)]
12.5±0.5
2. Low profile equipment such as lighting equipment,
FPD, Digital Amplifier
A/B Type
(in mm)
o A Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
Part Number
(min.)
(mH)
(min.)
(Vac)
(µH)
PLY17BN4912R4A2
PLY17BN9612R0A2
PLY17BN1023R0A2
PLY17BN1121R8A2
PLY17BN1721R5A2
PLY17BN2921R2A2
PLY17BN3721R0A2
PLY17BN5620R8A2
PLY17BN7820R7A2
PLY17BN9320R6A2
0.49
0.96
1.0
1.1
1.7
2.9
3.7
5.6
7.8
9.3
18
36
2.4
2.0
3.0
1.8
1.5
1.2
1.0
0.8
0.7
0.6
300
300
300
300
300
300
300
300
300
300
36
44
67
110
140
210
290
350
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o B Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
Part Number
(min.)
(mH)
(min.)
(Vac)
(µH)
PLY17BN4912R4B2
PLY17BN9612R0B2
PLY17BN1023R0B2
PLY17BN1121R8B2
PLY17BN1721R5B2
PLY17BN2921R2B2
PLY17BN3721R0B2
PLY17BN5620R8B2
PLY17BN7820R7B2
PLY17BN9320R6B2
0.49
0.96
1.0
1.1
1.7
2.9
3.7
5.6
7.8
9.3
24
47
2.4
2.0
3.0
1.8
1.5
1.2
1.0
0.8
0.7
0.6
300
300
300
300
300
300
300
300
300
300
47
58
88
140
180
280
390
460
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
16
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
■ Equivalent Circuit Diagram
■
Common Mode Insertion Loss-Frequency Characteristics
0
PLY17BN9612R0-2
20
40
PLY17BN4912R4-2
PLY17BN1023R0-2
(1)
(4)
(2)
(3)
2
PLY17BN9320R6-2
PLY17BN7820R7-2
PLY17BN5620R8-2
PLY17BN3721R0-2
PLY17BN2921R2-2
PLY17BN1721R5-2
PLY17BN1121R8-2
60
80
0.01
0.1
1
10
100
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
PLY17BN***A2
PLY17BN***B2
0
0
20
40
20
PLY17BN9320R6A2
PLY17BN7820R7A2
PLY17BN5620R8A2
PLY17BN3721R0A2
PLY17BN2921R2A2
PLY17BN1721R5A2
PLY17BN1121R8A2
PLY17BN9612R0A2
PLY17BN4912R4A2
PLY17BN1023R0A2
PLY17BN9320R6B2
PLY17BN7820R7B2
PLY17BN5620R8B2
PLY17BN3721R0B2
PLY17BN2921R2B2
PLY17BN1721R5B2
PLY17BN1121R8B2
PLY17BN9612R0B2
PLY17BN4912R4B2
PLY17BN1023R0B2
40
60
60
80
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
17
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
PLY17 Series (Safety Standard Recognized)
22.5±0.5
■ Features
1. Integration of choke coil function to suppress
differential mode/Low and High Frequency common
mode noise.
2. Low Profile (H=<13mm)
2
3. Safety standards: EN60065
ø1.0 max.
■ Applications
(1)
[(2)]
(4)
[(3)]
12.5±0.5
1. For AC power supply, AC adapter
2. Low profile equipment such as lighting equipment,
FPD, Digital Amplifier
A/B Type
(in mm)
o A Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
Part Number
(min.)
(mH)
(min.)
(Vac)
(µH)
PLY17BS4912R4A2
PLY17BS9612R0A2
PLY17BS1023R0A2
PLY17BS1121R8A2
PLY17BS1721R5A2
PLY17BS2921R2A2
PLY17BS3721R0A2
PLY17BS5620R8A2
PLY17BS7820R7A2
PLY17BS9320R6A2
0.49
0.96
1.0
1.1
1.7
2.9
3.7
5.6
7.8
9.3
18
36
2.4
2.0
3.0
1.8
1.5
1.2
1.0
0.8
0.7
0.6
250
250
250
250
250
250
250
250
250
250
36
44
67
110
140
210
290
350
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o B Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
Part Number
(min.)
(mH)
(min.)
(Vac)
(µH)
PLY17BS4912R4B2
PLY17BS9612R0B2
PLY17BS1023R0B2
PLY17BS1121R8B2
PLY17BS1721R5B2
PLY17BS2921R2B2
PLY17BS3721R0B2
PLY17BS5620R8B2
PLY17BS7820R7B2
PLY17BS9320R6B2
0.49
0.96
1.0
1.1
1.7
2.9
3.7
5.6
7.8
9.3
24
47
2.4
2.0
3.0
1.8
1.5
1.2
1.0
0.8
0.7
0.6
250
250
250
250
250
250
250
250
250
250
47
58
88
140
180
280
390
460
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
18
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
■ Equivalent Circuit Diagram
■
Common Mode Insertion Loss-Frequency Characteristics
0
PLY17BS9612R0-2
20
40
PLY17BS4912R4-2
PLY17BS1023R0-2
(1)
(4)
(2)
(3)
2
PLY17BS9320R6-2
PLY17BS7820R7-2
PLY17BS5620R8-2
PLY17BS3721R0-2
PLY17BS2921R2-2
PLY17BS1721R5-2
PLY17BS1121R8-2
60
80
0.01
0.1
1
10
100
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
PLY17BS***A2
PLY17BS***B2
0
0
20
40
20
PLY17BS9320R6A2
PLY17BS7820R7A2
PLY17BS5620R8A2
PLY17BS3721R0A2
PLY17BS2921R2A2
PLY17BS1721R5A2
PLY17BS1121R8A2
PLY17BS9612R0A2
PLY17BS4912R4A2
PLY17BS1023R0A2
PLY17BS9320R6B2
PLY17BS7820R7B2
PLY17BS5620R8B2
PLY17BS3721R0B2
PLY17BS2921R2B2
PLY17BS1721R5B2
PLY17BS1121R8B2
PLY17BS9612R0B2
PLY17BS4912R4B2
PLY17BS1023R0B2
40
60
60
80
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
19
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
Noise Suppression Effect of PLY10 Series
The data shows noise suppression effects comparison PLY10 with existing common mode choke coil. (In AC adaptor of note PC)
2
Common mode choke coil and differentical mode choke coil are used.
0.33µF 0.1µF
Hybrid choke coil PLY10
0.1µF
0.33µF
24mH
680µH
1000pF
1000pF
PLY10A1130R5D
• Noise Level
The filter circuit with hybrid choke coil has suppressed conducted noise as well as conventional filter in spite of its compact
composition.
Common mode choke coil and differencial mode choke coil are used.
90
Hybrid choke coil PLY10
90
80
70
60
50
40
80
70
60
50
40
30
20
30
20
0.5
1
5
10
30
0.5
1
5
10
30
Frequency (MHz)
Frequency (MHz)
20
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
!Caution /Notice
■ !Caution (Rating)
1. Rated Current
Maximum allowable temperature at the surface of
coil (ambient temperature + winding temperature
rise) is in accordance with each safety standard
applicable to final assembled product.
Operating current should not exceed the rated
value. Even if operating current is under the
rated value, adequate ventilation is required to
avoid excessive heat generated within the product
(choke coil) and from surrounding heat sources.
If exceeding these conditions, excessive heat may
cause fumes or permanent damage to the product.
Please ensure that product (choke coil) is
evaluated and confirmed against the specification
when it is mounted in your final assembled product.
-> Winding temperature should be less than
120 degree C.
2
When the temperature at winding exceeds maximum
allowable temperature of safety standard, the
rated current should be derated.
2. Inrush Current
Inrush current should not exceed 10 times rated
current within 1/4 cycle of 50/60Hz commercial
power line. Inrush current should be limited to a
minimum of 10 seconds after last inrush.
*As for FKOB series winding temperature should be
less than 95 degree C.
If these conditions are exceeded, excessive heat may
cause fumes or permanent damage to the component,
or at worst cause ignition.
■ Notice (Storage and Operating Condition)
1. Soldering Conditions
2. Cleaning
(1) Flux, Solder
Avoid cleaning product due to non-waterproof
construction.
3. Storage and Handling Requirements
(1) Storage period
· Rosin-based flux should be used. Do not use strong
acidic flux with halide content exceeding 0.2wt%
(chlorine conversion value)
· Use 63/37 solder (Sn/Pb = 63/37) or 60/40 solder
(Sn/Pb = 60/40). In case of lead-free solder, use
Sn-3.0Ag-0.5Cu solder
Product should be used within 12 months after receiving.
Solderability should be checked if this period is
exceeded.
(2) Flow soldering profile
(2) Storage conditions
Storage Temperature: -10 to 40 °C
Relative humidity: 30 to 70%
Gradual cooling
Pre-heating
Soldering
(in air)
300
250
200
150
100
50
Soldering temperature
Avoid sudden changes in temperature and humidity.
Don't keep products in corrosive gases such as sulfur,
chlorine gas or acid, or it may cause oxidation of lead
terminals resulting in poor solderability or corrosion of
component windings.
150°C
(3) Handling conditions
60s min.
Soldering time
Care should be taken when transporting or handling
product to avoid excessive vibration or mechanical shock.
Standard profile
Limit profile
Sn/Pb = 60/40, Sn/Pb = 63/37 Sn-3.0Ag-0.5Cu solder
Soldering temp. Soldering time Soldering temp. Soldering time Soldering temp. Soldering time Cycle of flow
240-260°C 5s max. 250±2°C
4-6s
265±3°C
5s
2 times
For additional mounting methods, please contact Murata.
■ Notice (Soldering and Mounting)
Magnetic Flux Leakage
■ Notice (Rating)
Coil Humming Noise
Choke coils generate small amounts of magnetic flux
leakage that may adversely affect equipment operation
according to component arrangement.
Magnetic flux generated between coil and core or
between the choke coil windings creates repulsive
power between the coil windings. This repulsive
power causes the coil winding to vibrate and create
a humming noise. The amount of hum produced by the
coil is proportionate to the amount of harmonic
distortion generated by the operating current. This
does not influence the electrical performance of
the coils, but it should be considered and tested
in actual circuit application.
Testing should be completed on final assembly to
ensure equipment performance is not affected.
21
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
C09E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
06.2.9
Packaging
■ Minimum Quantity
Minimum Quantity (pcs.)
Part Number
Magazine Package
Box
100
-
FKOB
PLA10
PLH10
PLY10
PLY17
1800
1800
1800
1920
1260
1260
1200
1080
2
22
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C09E.pdf
06.2.9
Note:
1. Export Control
For customers outside Japan
<
>
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
t Medical equipment
u Traffic signal equipment
o Data-processing equipment
r Power plant equipment
y Transportation equipment (vehicles, trains, ships, etc.)
i Disaster prevention / crime prevention equipment
! Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of January 2006. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
He a d O ffice
In te rn a tio n a l Divisio n
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
相关型号:
©2020 ICPDF网 联系我们和版权申明