PTGL07AS5R6K4B51A0 [MURATA]
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type; PTC热敏电阻过电流保护/抑制突入电流/过热传感引线型型号: | PTGL07AS5R6K4B51A0 |
厂家: | muRata |
描述: | PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type |
文件: | 总103页 (文件大小:1803K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr
for Circuit Protection
Cat.No.R90E-13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
EU RoHS Compliant
s
All the products in this catalog comply with EU RoHS.
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
s
(http://www.murata.com/info/rohs.html).
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
1
CONTENTS
POSISTORr and "POSISTOR" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
2
3
Part Numbering
2
5
Basic Characteristics of POSISTORr
Selection Guide
7
Application Matrix
8
Application Notes
9
4
1
Overcurrent Protection Chip Type
13
20
22
25
30
33
36
43
49
56
64
66
67
68
69
70
71
72
73
76
78
81
82
86
87
97
98
Chip Type Specifications and Test Methods
5
2
3
4
5
6
7
8
9
Overcurrent Protection Narrow Current Band 30V Series
Overcurrent Protection Narrow Current Band 51/60V Series
Overcurrent Protection Narrow Current Band 140V Series
Overcurrent Protection 16V Series
6
7
Overcurrent Protection 24/30/32V Series
Overcurrent Protection 56/80V Series
8
Overcurrent Protection 125/140V Series
Overcurrent Protection 250/265V Series
PTGL Series Narrow Current Band Specifications and Test Methods
PTGL Series Specifications and Test Methods
9
10
11
Inrush Current Suppression (Less than 100μF)
10
11
12
13
14
Inrush Current Suppression for High Capacitance (100μF or more)
Inrush Current Suppression Specifications and Test Methods
12
13
Overheat Sensing Chip Tight Tolerance Type
Overheat Sensing Chip Type
Overheat Sensing Chip Type (Related Data)
Overheat Sensing Chip Tight Tolerance Type (Reference Data)
Overheat Sensing Chip Type (Reference Data)
Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods
Overheat Sensing Chip Type Specifications and Test Methods
14
Overheat Sensing Lead Type
Temperature Sensor Lead Type Specifications and Test Methods
!Caution/Notice
Chip Type PRG/PRF Series Package
Lead Type PTGL/PTF Series Package
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
o Part Numbering
PTC Thermistors (POSISTORr) for Overcurrent Protection Chip Type
(Part Number)
PR
G
18 BB 470
M
B1 RB
q
w
e
r
t
y
u
i
qProduct ID
tResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω). The
first and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R." In
this case, all figures are significant digits.
Product ID
PR
PTC Thermistors Chip Type
wSeries
Ex.
Code
Series
Code
470
Resistance
47Ω
G
for Overcurrent Protection
471
470Ω
eDimensions (LgW)
yResistance Tolerance
Code
18
Dimensions (LgW)
1.60g0.80mm
EIA
0603
0805
Code
Resistance Tolerance
21
2.00g1.25mm
M
20ꢀ
rTemperature Characteristics
uIndividual Specifications
Ex.
Code
BB
Temperature Characteristics
Individual Specifications
Code
Curie Point 100°C
Curie Point 90°C
Structure, others
B1
BC
iPackaging
Packaging
Code
Embossed Taping (4mm Pitch) (4000 pcs.)
Paper Taping (4mm Pitch) (4000 pcs.)
Embossed Taping (4mm Pitch) (3000 pcs.)
RA
RB
RK
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
PTC Thermistors (POSISTORr) for Overheat Sensing Chip Type
(Part Number)
PR
F
18 BB 471
Q
B5 RB
q
w
e
r
t
y
u
i
qProduct ID
tResistance
Expressed by three figures. The unit is ohm (Ω). The first and
second figures are significant digits, and the third figure expresses
the number of zeros which follow the two figures.
Product ID
PR
PTC Thermistors Chip Type
wSeries
Ex.
Code
Resistance
Code
Series
471
470Ω
F
for Overheat Sensing
yResistance Tolerance
eDimensions (LgW)
Code
Q
Resistance Tolerance Sensing Temp. Tolerance
Code
15
Dimensions (LgW)
1.00g0.50mm
1.60g0.80mm
2.00g1.25mm
EIA
Special Tolerance
Special Tolerance
5°C
3°C
0402
0603
0805
R
18
uIndividual Specifications
21
Ex.
Individual Specifications
Code
rTemperature Characteristics
Structure, others
B5
Code
AR
AS
Temperature Characteristics
iPackaging
Curie Point 120°C
Curie Point 130°C
Curie Point 110°C
Curie Point 100°C
Curie Point 90°C
Curie Point 80°C
Curie Point 70°C
Curie Point 60°C
Curie Point 50°C
Packaging
Code
BA
BB
BC
BD
BE
Embossed Taping (4mm Pitch) (4000 pcs.)
Paper Taping (4mm Pitch) (4000 pcs.)
Paper Taping (2mm Pitch) (10000 pcs.)
RA
RB
RC
BF
BG
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
PTC Thermistors (POSISTORr)
for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
(Part Number)
3P51 A0
PT GL 07 AR 220
M
q
w
e
r
t
y
u
i
qProduct ID
tResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω). The
first and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R." In
this case, all figures are significant digits.
Product ID
PT
PTC Thermistors
wSeries
Ex.
Code
FL
Series
Code
R22
2R2
220
Resistance
1.±±Ω
±.±Ω
for Overheat Sensing Lead Type
FM
for Overheat Sensing with Lug-terminal
±±Ω
for Current Control (Over Current Protection ·
Inrush Current Suppression) Lead Type
GL
yResistance Tolerance
eDimensions
Code
H
Resistance Tolerance
Code
04
Dimensions
±±25
±ꢀ15
Nominal Body Diameter 4mm Series
Nominal Body Diameter 2mm Series
Nominal Body Diameter 7mm Series
Nominal Body Diameter 9mm Series
Nominal Body Diameter ꢀ1mm Series
Nominal Body Diameter ꢀ±mm Series
Nominal Body Diameter ꢀꢁmm Series
Nominal Body Diameter ꢀ4mm Series
Nominal Body Diameter ꢀ6mm Series
Nominal Body Diameter ꢀ8mm Series
Nominal Body Diameter ±1mm Series
K
05
M
±±15
07
N
±ꢁ15
09
Q
Special Tolerance
10
uIndividual Specifications
12
Ex.
13
Individual Specifications
Code
14
Lead Type, others
3P51
16
iPackaging
18
20
Packaging
Ammo Pack
Bulk
Code
A*
rTemperature Characteristics
B*
Code
AR
AS
BA
BB
BC
BD
BE
BF
Temperature Characteristics
Curie Point ꢀ±1°C
Curie Point ꢀꢁ1°C
Curie Point ꢀꢀ1°C
Curie Point ꢀ11°C
Curie Point 91°C
Curie Point 81°C
Curie Point 71°C
Curie Point 61°C
Curie Point 21°C
Curie Point 41°C
BG
BH
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Basic Characteristics of POSISTORr
cBasic Characteristics
POSISTORr has three main characteristics.
1. Resistance - Temperature Characteristics
Although there is a negligible difference between the
normal and "Curie Point" temperature, POSISTORr
shows almost constant resistance-temperature
characteristics. Yet they have resistance-temperature
characteristics that cause resistance to sharply increase
when the temperature exceeds the Curie Point.
The Curie Point (C.P.) is defined as the temperature at
which the resistance value is twice the one at 25°C.
Resistance - Temperature Characteristic
105
BD BC BB AR
104
103
102
10
1
0
50
100
150
200
C.P. (AR: 120°C)
Temperature (°C)
2. Current - Voltage Characteristics (Static Characteristic)
This shows the relation between applied voltage when
voltage applied to POSISTORr causes balancing of
inner heating and outer thermal dissipation and stabilized
current. This has both a maximum point of current and
constant output power.
Current - Voltage Characteristic (Static Characteristic)
103
Ta=25°C
102
10
1
0.1
1
10
102
Voltage (V)
3. Current - Time Characteristics (Dynamic Characteristic)
This shows the relation between current and time before
inner heating and outer thermal dissipation arrive at
equilibrium state. This features having large initial current
and abruptly continuous attenuating portion.
Current - Time Characteristic (Dynamic Characteristic)
1.5
Ta=25°C
1.0
0.5
Time (sec.)
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Basic Characteristics of POSISTORr
Technical Terms
1. Protective Threshold Current
The maximum current value is called the "Protective
Threshold Current" for Voltage vs. Current characteristics
(static).
Load Curve of Circuit and Voltage - Current Characteristics
a
b
c
Load curve in normal state
(normal current)
Load curve in abnormal state
(abnormal current)
Voltage-current characteristics
of POSISTORr
of POSISTORr
When smaller than the protective threshold current flows
in POSISTORr, it reaches its stability (as shown in figure
on right) at the intersection (A) of the load curve (a) and
voltage-current characteristics of POSISTORr(c). And
POSISTORr works as a normal fixed resistor.
However, when larger than protective threshold current
flows, it stabilizes at the intersection (B) with the load
curve (b).
Vp
b
a
c
E
RL
I
A
E - Vp
RL
B
I =
E
Voltage (log)
2. Protective Threshold Current Range
Protective threshold current varies depending on the
ambient temperature, resistance value, temperature
characteristics and shape. (see Figure on right) The
maximum value of trip current and the minimum value of
the hold current are in the range of ambient temperature
-10 to +60°C.
Protective Threshold Current Range
1000
800
Trip Current
600
400
200
0
Protective Threshold Current
Hold Current
That is, when a current is smaller than the hold current,
POSISTORr works only as a fixed resistor. When larger
than the trip current flows, however, POSISTORr
protects the circuit from overload.
-20
0
20
40
60
Ambient Temperature (°C)
3. Operating Time
A period starting from the voltage input to the moment
current itself sharply attenuates is called "Operating
Time." Conventionally, operation time (t0) is determined
to be the period until inrush current (I0) decreases to a
level one half the original inrush current (I0/2).
Operating Current
I0
Operating Time
I0
2
t0
Time (sec.)
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Selection Guide
Please confirm the parameters according to the following questions.
The best selection is the product that matches three parameters.
o Confirmation Items
What is the potential maximum
How much current flows in the
circuit at normal conditions?
How much current flows in the
circuit at abnormal conditions?
voltage applied to POSISTORr?
o Example
Line Voltage 140V
Usual Current 200mA
Abnormal Current 580mA
o Selection Standards
Line
voltage
Maximum voltage
of POSISTORr
Usual
current
Hold current
of POSISTORr
Abnormal
current
Trip current of
POSISTORr
V
V
U
Hold
Trip
Resistance
(at 25°C)
(ohm)
Body
Diameter (D)
(mm)
Thickn
(T)
(mm)
Max. Voltage
(V)
Max. Current
(A)
Part Number
Current at +60°C Current at -10°C
(mA)
(mA)
PTGL18AR4R7M6B72B0
PTGL18AR3R3M6B72B0
PTGL07AR330M6A51B0
PTGL09AR220M6C61B0
PTGL10AR150M6C61B0
PTGL12AR100M6C01B0
PTGL13AR6R8M6C01B0
PTGL16AR5R6M6C01B0
4.7 20ꢀ
3.3 20ꢀ
33 20ꢀ
22 20ꢀ
15 20ꢀ
10 20ꢀ
6.8 20ꢀ
5.6 20ꢀ
125
125
140
140
140
140
140
140
360
900
1.7
2.0
0.5
1.0
1.0
1.0
1.0
2.0
18.5
18.5
7.4
5.5
5.5
6.0
6.
420
100
140
170
220
290
340
1050
230
330
400
510
670
780
9.6
11.6
13.0
14.0
17.0
PTGL12AR100M6C01B0 is the best selection in this case.
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Application Matrix
Overcurrent Protection
Overheat Sensing
Series
Chip type
Lead type
Chip type
Lead type
Application
PRG
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
PTGL
o
PRF
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
PTFL, PTFM
AV equipment
Plasma TV
LCD TV
Projection TV
CATV
o
o
o
o
o
o
STB
o
Video camera
Digital camera
DVD recorder
Audio
Electric keyboard, Electronic music instrument
Digital mobile audio
MD/CD player
TV game
Portable game
Laptop
Desktop computer
Server
Printer
Scanner
LCD display
USB access device
HDD
o
o
o
o
o
o
Information equipment
o
o
o
o
o
o
o
o
o
o
o
CD/DVD-ROM/RAM
Copy machine
o
o
o
o
o
o
o
o
o
Electronic dictionary/databook
Electronic blackboard
Electronic automatic exchange
Transmission equipment
PBX
Cordless telephone
Fax machine
Modem
o
o
o
o
o
o
o
Communications equipment
o
o
o
o
o
o
o
o
o
o
Cellular phone
Headset
Cellular phone base station
Intercom
Engine control ECU
Drive control ECU
Air bag
o
o
o
o
o
o
o
Car electronics
o
o
o
o
o
o
o
o
o
o
o
Anticollision radar
ABS/ESC
o
o
o
Instrument/display panel, Meter
Rechargeable battery for EV/HEV
Car air conditioner
HID/LED headlight, AFS
LED tail light
LED interior light
Retractable electric mirror
Door lock, trunk opener
Power seat
o
o
o
o
o
o
o
o
o
o
o
Shock absorber
VICS, ETC
o
Burglar alarm
Car navigation
Car audio
Refrigerator
Microwave, Oven
Electric rice-cooker
IH cooking device
Air conditioner
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Home electronics
Household equipment
o
Fan heater
Cleaner
Clothes washer, cloth dryer
Ventilator
Hot-water pot
Illumination device
Massage chair, healthcare equipment
Hot water spray toilet seat
Electric power tool
Switching supply
Inverter power
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Power supply
AC adapter, battery charger
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Application Notes
c Inrush Current Limit for Power Supply
POSISTORr Lead type: PTGL series
1. Applications
POSISTORr is an integrated solution to work as both
current limit resistor and overcurrent fuse. It works as a
stable resistor in normal operation and protects itself
against overcurrent situations.
(1) High wattage power supply (flat display panels etc.)
(±) Power supply for fluorescent lights
(3) Other switching power supplies
Replacement idea for a resistor and fuse solution
POSISTORr
+
+
-
-
Load
Load
2. Benefits
(1) Protection against overcurrent situations
(±) Automatic reset from protective trip mode
(3) Space-saving
(4) Various characteristics to meet a suitable resistance
value
3. Recommended part numbers
Choose an appropriate part number based on the
resistance value required to the inrush current limit.
Review the maximum voltage.
Max.
Voltage
(V)
Resistance
(at 25 °C)
(ohm)
Body
Diameter
(mm)
Lead
Space
(mm)
Lead
Diameter
(mm)
Thickness
(mm)
More
Details
Application
Part Number
PTGL13AR100H8B72B0
PTGL12AR150H8B72B0
PTGL14AR180M9C01B0
PTGL09AR250H8B52B0
PTGL09AR390M9C61B0
PTGL07AR560M9B51A0
PTGL07AR820M9B51A0
PTGL07AS121M0N51A0
PTGL07AS181M0N51A0
10 ±±25
12 ±±25
18 ±±05
±2 ±±25
39 ±±05
26 ±±05
8± ±±05
1±0 ±±05
180 ±±05
14.0
1±.2
12.7
10.0
10.0
8.±
6.0
6.0
6.2
6.0
6.2
6.2
6.2
6.0
6.0
7.2
7.2
10.0
2.0
6.2
2.0
2.0
2.0
2.0
0.60
0.60
0.62
0.60
0.62
0.60
0.60
0.20
0.20
page 27
page 27
page 27
page 27
page 27
-
For high
wattage power
supply
±62
±80
For power supply
of electronic
fluorescent
ballasts
8.±
-
7.8
page 67
page 67
7.8
Please ask for details.
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Application Notes
c Overcurrent Protection for Communication Facility
POSISTORr Lead type: PTGL series
1. Applications
POSISTORr is an efficient device to protect a telephone
line interface (SLIC: Subscriber-Loop-Interface-Circuit)
against AC line contact.
(1) Landline telephones or FAX machines
(2) Telephone interface of STB, VoIP equipment
(3) Any other equipment of communication facility having
a phone line interface
Replacement idea for a current fuse.
Ring
Ring
Tip
POSISTORr
SLIC
SLIC
Tip
2. Benefits
(1) Automatic reset from protective trip up to 265V AC
line contact
(2) Compatible with the 600V over voltage test by
UL60950
(3) High resistance to the lighting surge (*A surge
absorber is still required to protect SLIC)
3. Recommended part numbers
Choose an appropriate part number based on the hold
current and on the resistance value required to the
operation current of SLIC.
Max.
Max.
Hold Current
(at +60 °C)
(mA)
Trip Current
(at -10 °C)
(mA)
Resistance
(at +25 °C)
(ohm)
Body
Diameter
(mm)
Lead
Lead
Thickness
(mm)
More
Details
Part Number
Voltage Current
Space Diameter
(V)
(A)
(mm)
(mm)
PTGL07BB220N0B52A0
PTGL09AR390N0B52A0
PTGL09AR250H8B52B0
250
0.5
90
300
280
330
22 30ꢀ
39 30ꢀ
25 25ꢀ
8.0
6.0
6.0
6.0
5.0
0.6
page 56
page 56
page 57
250
265
0.6
1.0
100
118
10.0
10.0
5.0
5.0
0.6
0.6
Please ask for details.
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Application Notes
c Current Limiter for LED
Chip POSISTORr: PRG series
1. Applications
POSISTORr is an effective current limit solution based
on LED's allowable current and temperature
characteristics.
(1) LED lighting instruments
(2) LED backlight of flat displays
See below figures.
Protected by
POSISTORr
Higher brightness vs.
a fixed resistor
IC
IC
Current Limit by
a fixed resistor
Allowable LED
Working Zone
Allowable LED
Working Zone
Ambient Temp.
Ambient Temp.
LED Driving Circuit
LED Current
2. Benefits
(1) Higher LED brightness versus a fixed resistor. LED
can work in the smaller series resistance with
POSISTORr at normal operation temperature. The
number of LEDs is possibly reduced.
(2) LED lifetime may be extended due to the current
limiting function of the POSISTORr in cases of
overheat or overcurrent situation.
(3) Small 0805 package allows the POSISTORr to be
placed close to the LED. It offers accurate detection of
ambient temperature near LED and increases
flexibility of packaging.
3. Recommended part numbers
Choose an appropriate part number having max. voltage
and resistance value. Review the protective threshold
current range based on the operating current and
temperature of the LED.
Max.
Voltage
(V)
Max.
Current
(A)
Hold Current
(at +60 °C)
(mA)
Trip Current
(at -10 °C)
(mA)
Resistance
(at +25 °C)
(ohm)
Curie Point
More
Details
Part Number
(°C) *
PRG21BC0R6MM1RA
PRG21BC0R2MM1RA
PRG21BC1R0MM1RA
PRG21BC2R2MM1RA
PRG21BC3R3MM1RA
PRG21BC6R8MM1RA
PRG21BC4R7MM1RA
6
10
10
285
500
220
150
120
80
1100
2000
850
600
480
320
400
0.6 20ꢀ
0.2 20ꢀ
1.0 20ꢀ
2.2 20ꢀ
3.3 20ꢀ
6.8 20ꢀ
4.7 20ꢀ
90
90
90
90
90
90
90
page 14
page 14
page 14
page 14
page 14
page 14
page 14
6
12
16
20
30
30
10
6.5
6.0
3.5
5.0
100
*Curie Point means the temperature at which the resistance value reaches twice the resistance at 25°C.
Please ask for details.
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Application Notes
c Overheat/Overcurrent Protection for High Brightness LED
Leaded POSISTORr: PTGL series & Chip POSISTORr: PRG series
1. Applications
POSISTORr is an effective solution to protect the LED against overheat and overcurrent situation.
(1) LED lighting instruments (Appliances, Automotive etc.)
a) Overcurrent
Resistance up !!
Heat up by
overcurrent !
b) Overheat
Resistance up !!
Heat up by
overheat situation !
2. Benefits
(1) Posistor installed in series with LED provides both
(3) Automatic reset from protective trip mode
overheat and overcurrent protection
(4) 0603 and 0805 SMD type available (smaller than
1/2W or 1W chip resistor)
(2) No additional driver IC or software required
3. Recommended part numbers
Choose an appropriate part number having max. voltage
current range based on the operating current and
temperature of the LED.
and resistance value. Review the protective threshold
Max.
Voltage
(V)
Max.
Current
(A)
Hold Current
(at +60 °C)
(mA)
Trip Current
(at -10 °C)
(mA)
Resistance
(at +25 °C)
(ohm)
Curie Point
(°C) *
More
Details
Type
Part Number
PRG21BC0R6MM1RA
PRG21BC0R2MM1RA
PRG21BC1R0MM1RA
PRG21BC2R2MM1RA
PRG21BC3R3MM1RA
PRG21BC6R8MM1RA
PRG21BC4R7MM1RA
PTGL04AS100K2N51B0
PTGL04AS100K2B51B0
PTGL05AS3R9K2B51B0
PTGL07AS2R7K2B51B0
PTGL07AS1R8K2B51B0
PTGL09AS1R2K2B51B0
PTGL12AS0R8K2B51B0
PTGL04AS100K3B51B0
PTGL05AS6R8K3B51B0
PTGL07AS3R3K3B51B0
PTGL09AS2R2K3B51B0
PTGL12AS1R2K3B51B0
PTGL07AR220M3P51B0
PTGL07AR8R2M3P51B0
PTGL09AR150M3B51B0
PTGL10AR3R9M3P51B0
PTGL09AR4R7M3B51B0
PTGL10AR3R9M3B51B0
PTGL14AR3R3M3B71B0
6
10
10
285
500
220
150
120
80
1100
2000
850
600
480
320
400
240
330
530
663
829
1097
1352
332
388
606
814
1168
240
350
400
550
700
800
980
0.6 20ꢀ
0.2 20ꢀ
1.0 20ꢀ
2.2 20ꢀ
3.3 20ꢀ
6.8 20ꢀ
4.7 20ꢀ
10 10ꢀ
10 10ꢀ
3.9 10ꢀ
2.7 10ꢀ
1.8 10ꢀ
1.2 10ꢀ
0.8 10ꢀ
10 10ꢀ
6.8 10ꢀ
3.3 10ꢀ
2.2 10ꢀ
1.2 10ꢀ
22 20ꢀ
8.2 20ꢀ
15 20ꢀ
3.9 20ꢀ
4.7 20ꢀ
3.9 20ꢀ
3.3 20ꢀ
90
page 14
page 14
page 14
page 14
page 14
page 14
page 14
page 22
page 22
page 22
page 22
page 22
page 22
page 22
page 25
page 25
page 25
page 25
page 25
page 43
page 43
page 43
page 43
page 43
page 43
page 43
6
90
12
16
20
30
30
30
30
30
30
30
30
30
51
51
51
51
51
56
56
56
56
56
56
56
10
90
SMD
type
6.5
6.0
3.5
5.0
1.5
2.0
3.5
4.5
5.0
6.0
7.0
1.0
1.5
3.0
4.0
5.0
1.0
1.0
1.2
2.0
2.0
2.0
2.5
90
90
90
100
122
167
269
336
420
556
685
168
197
307
412
592
90
90
130
130
130
130
130
130
130
130
130
130
130
130
120
120
120
120
120
120
120
Lead
type
130
150
210
270
300
380
* Curie Point means the temperature at which the resistance value reaches twice the resistance at 25°C.
Please ask for details.
12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
1
POSISTORr for Circuit Protection
Overcurrent Protection Chip Type
Overcurrent Protection device with resettable function
suitable for current limiting resistor.
This product is a chip type PTC thermistor for
overcurrent protection that is suitable for the
following.
e
g
e
· Countermeasure for short circuit testing
· Current limiting resistor
L
W
Dimensions (mm)
Part Number
L
W
T
e
g
-
Features
c
1.6±±.1ꢀ ±.8±±.1ꢀ ±.8±±.1ꢀ ±.1 to ±.6
PRG18_RB
PRG21_RA
PRG21_RK
1. Rapid operation to protect the circuit in an
overcurrent condition abnormality such as a
short circuit.
2.±±±.2 1.2ꢀ±±.2 ±.9±±.2 ±.2 min. ±.ꢀ min.
2.±±±.2 1.2ꢀ±±.2 1.2ꢀ±±.2 ±.2 min. ±.ꢀ min.
By removing the overcurrent condition, these
products automatically return to the initial
condition and can be used repeatedly.
2. Suitable for countermeasure to short circuit test
in safety standard.
3. Stable resistance after operation due to ceramic
PTC.
4. Similar size (0603 size) is possible due to the
large capacity for electric power.
5. Possible to use these products as current
limiting resistors with overcurrent protection
functions
6. The SMD type's small size and light weight are
helpful in miniaturizing the circuit.
Chip Type 0603(1608) Size
Max.
Voltage
(V)
Hold Current
(at +60°C)
(mA)
Hold Current
(at +25°C)
(mA)
Trip Current
(at +25°C)
(mA)
Trip Current
(at -10°C)
(mA)
Max.
Current
(mA)
Resistance
(at +25°C)
(ohm)
Part Number
PRG18BB471MB1RB
PRG18BB221MB1RB
PRG18BB101MB1RB
PRG18BB470MB1RB
PRG18BB330MB1RB
PRG18BC6R8MM1RB
PRG18BC4R7MM1RB
PRG18BC3R3MM1RB
PRG18BC2R2MM1RB
PRG18BC1R0MM1RB
24
24
24
24
24
20
20
16
12
6
7
10
14
21
29
25
35
60
470 20ꢀ
220 20ꢀ
100 20ꢀ
47 20ꢀ
33 20ꢀ
6.8 20ꢀ
4.7 20ꢀ
3.3 20ꢀ
2.2 20ꢀ
1.0 20ꢀ
10
130
15
21
45
55
300
20
29
61
75
630
25
36
71
85
900
80
120
155
180
220
330
260
330
400
500
740
320
400
480
600
850
3500
5000
6000
6500
7500
100
120
150
220
Maximum Current shows typical capacities of the transformer which can be used.
This series is applied to reflow soldering.
This series is recognized by UL.
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
1
Chip Type 0805(2012) Size
Max.
Voltage
(V)
Hold Current
(at +60°C)
(mA)
Hold Current
(at +25°C)
(mA)
Trip Current
(at +25°C)
(mA)
Trip Current
(at -10°C)
(mA)
Max.
Current
(mA)
Resistance
(at +25°C)
(ohm)
Part Number
PRG21BB220MB1RK
PRG21BB150MB1RK
PRG21BC6R8MM1RA
PRG21BC4R7MM1RA
PRG21BC3R3MM1RA
PRG21BC2R2MM1RA
PRG21BC1R0MM1RA
PRG21BC0R6MM1RA
PRG21BC0R2MM1RA
20
20
30
30
20
16
12
6
30
40
44
91
116
260
330
400
500
740
920
1620
110
140
320
400
480
600
850
1100
2000
1100
1600
5500
8000
6000
6500
10000
10000
10000
22 20ꢀ
15 20ꢀ
6.8 20ꢀ
4.7 20ꢀ
3.3 20ꢀ
2.2 20ꢀ
1.0 20ꢀ
0.6 20ꢀ
0.2 20ꢀ
59
80
120
155
180
220
330
420
750
100
120
150
220
285
500
6
Maximum Current shows typical capacities of the transformer which can be used.
This series is applied to reflow soldering.
This series is recognized by UL.
Standard Land Pattern Dimensions
c
Solder resist
Chip
Land
b
a
(in mm)
Dimensions (mm)
Soldering
Methods
Part Number
Chip (LgW)
a
b
c
Reflow Soldering
Reflow Soldering 2.0g1.25 1.0-1.2 0.5-0.7 1.0-1.2
1.6g0.8 0.6-0.8 0.6-0.7 0.6-0.8
PRG18
PRG21
Protective Threshold Current Range
c
PRG18BB471MB1RB
PRG18BB221MB1RB
40
60
40
20
30
Trip current
Trip current
20
Protective threshold current
Protective threshold current
10
Hold current
Hold current
0
0
–10
0
10
20
30
40
50
60
–10
0
10
20
30
40
50
60
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page.
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Protective Threshold Current Range
c
1
PRG18BB101MB1RB
PRG18BB470MB1RB
100
80
80
60
Trip current
Trip current
60
40
Protective threshold current
Protective threshold current
40
20
Hold current
20
Hold current
0
0
–10
0
10
20
30
40
50
60
–10
0
10
20
30
40
50
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PRG18BB330MB1RB
PRG18/21BC6R8M Type
100
350
300
250
200
150
100
50
Trip current
Trip current
80
60
Protective threshold current
Protective threshold current
40
20
Hold current
Hold current
0
–10
0
10
20
30
40
50
60
0
–10
0
10
20
30
40
50
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PRG18/21BC4R7M Type
PRG18/21BC3R3M Type
450
700
600
500
400
300
200
100
0
Trip current
400
350
300
250
200
150
100
50
Trip current
Protective threshold current
Protective threshold current
Hold current
10
Hold current
–10
0
20
30
40
50
60
0
–10
0
10
20
30
40
50
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PRG18/21BC2R2M Type
PRG18/21BC1R0M Type
1200
1000
800
600
400
200
0
700
600
500
400
300
200
100
0
Trip current
Trip current
Protective threshold current
Protective threshold current
Hold current
10
Hold current
–10
0
20
30
40
50
60
–10
0
10
20
30
40
50
60
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page.
15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Protective Threshold Current Range
c
1
PRG21BB220MB1RK
PRG21BB150MB1RK
160
140
160
140
120
120
Trip current
Trip current
100
100
Protective threshold current range
80
80
60
40
20
0
Protective threshold current range
60
40
Hold current
Hold current
20
0
–10
0
10
20
30
40
50
60
–10
0
10
20
30
40
50
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PRG21BC0R6MM1RA
PRG21BC0R2MM1RA
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1200
1000
800
600
400
200
0
Trip current
Trip current
Protective threshold current
Protective threshold current
Hold current
Hold current
–10
0
10
20
30
40
50
60
–10
0
10
20
30
40
50
60
Ambient Temperature (°C)
Ambient Temperature (°C)
Operating Time (Typical Curve)
c
PRG18BB471MB1RB
PRG18BB221MB1RB
20
20
15
10
5
15
Y10°C
Y10°C
W25°C Ambient Temp.
W60°C
W25°C Ambient Temp.
W60°C
10
5
0
0
0
20
40
60
80
100
0
20
40
60
80
100
Overcurrent (mA)
Overcurrent (mA)
Continued on the following page.
16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time (Typical Curve)
c
1
PRG18BB101MB1RB
PRG18BB470MB1RB
20
15
20
15
Y10°C
Y10°C
W25°C Ambient Temp.
W25°C Ambient Temp.
W60°C
W60°C
10
10
5
5
0
0
0
0
0
100
200
300
0
0
0
100
200
300
1000
1500
Overcurrent (mA)
Overcurrent (mA)
PRG18BB330MB1RB
PRG18BC6R8MM1RB
10.0
8.0
6.0
4.0
2.0
0.0
20
15
10
5
–10°C
+25°C
+60°C
Ambient Temp.
Y10°C
W25°C Ambient Temp.
W60°C
0
100
200
300
400
500
200
400
600
800
Overcurrent (mA)
Overcurrent (mA)
PRG18BC4R7MM1RB
PRG18BC3R3MM1RB
10.0
8.0
6.0
4.0
2.0
0.0
10.0
8.0
6.0
4.0
2.0
0.0
–10°C
–10°C
+25°C
+60°C
Ambient Temp.
+25°C
+60°C
Ambient Temp.
200
400
600
800
1000
500
1000
Overcurrent (mA)
Overcurrent (mA)
Continued on the following page.
17
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time (Typical Curve)
c
1
PRG18BC2R2MM1RB
PRG18BC1R0MM1RB
10.0
10.0
8.0
6.0
4.0
2.0
0.0
8.0
–10°C
–10°C
+25°C
+60°C
Ambient Temp.
+25°C
+60°C
Ambient Temp.
6.0
4.0
2.0
0.0
0
0
0
500
1000
1500
0
0
0
500
1000
1500
2000
2500
3000
Overcurrent (mA)
Overcurrent (mA)
PRG21BB220MB1RK
PRG21BB150MB1RK
20
15
10
5
20
15
10
5
Y10°C
Y10°C
W25°C Ambient Temp.
W60°C
W25°C Ambient Temp.
W60°C
0
0
100
200
300
400
500
100
200
300
400
500
Overcurrent (mA)
Overcurrent (mA)
PRG21BC6R8MM1RA
PRG21BC4R7MM1RA
10
8
10
8
Y10°C
W25°C
W60°C
Ambient Temp.
6
6
Y10°C
W25°C
W60°C
Ambient Temp.
4
4
2
2
0
0
200
400
600
800
1000
200
400
600
800
1000
Overcurrent (mA)
Overcurrent (mA)
Continued on the following page.
18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time (Typical Curve)
c
1
PRG21BC3R3MM1RA
PRG21BC2R2MM1RA
10.0
10.0
8.0
6.0
4.0
2.0
0.0
8.0
–10°C
–10°C
+25°C
+60°C
Ambient Temp.
+25°C
+60°C
Ambient Temp.
6.0
4.0
2.0
0.0
0
0
0
500
1000
1500
3000
10
0
500
1000
1500
Overcurrent (mA)
Overcurrent (mA)
PRG21BC1R0MM1RA
PRG21BC0R6MM1RA
10.0
8.0
6.0
4.0
2.0
0.0
10.0
8.0
6.0
4.0
2.0
0.0
–10°C
–10°C
+25°C
+60°C
Ambient Temp.
+25°C
+60°C
Ambient Temp.
500
1000
1500
2000
2500
0
500
1000
1500
2000
2500
3000
Overcurrent (mA)
Overcurrent (mA)
PRG21BC0R2MM1RA
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Y10°C
W25°C Ambient Temp.
W60°C
1
2
3
4
5
6
7
8
9
Overcurrent (A)
19
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Chip Type Specifications and Test Methods
1
c PRG18/21BB Series
No.
Item
Rating Value
Method of Examination
1
Operating Temp.
-10 to 60ꢀ°
ꢂemperature range with maximum voltage applied to Pꢂ°.
After applying maximum operating voltage for ± mins. and
leaving for 2 hrs. in 25ꢀ°ꢁ measured by applying voltage of less
than 1.5Vdc (by a direct current of less than 10mA).
ꢂhe resistance value should be within the specified
tolerance.
Resistance Value (at 25°C)
Withstanding Voltage
2
3
We apply 120ꢃ of the maximum operating voltage to Pꢂ° by
raising gradually for 180±5 secs. at 25ꢀ°. (A protective resistor
is to be connected in seriesꢁ and the inrush current through
Pꢂ° must be limited below maximum rated value.)
Without damage
EIAJ Eꢂ-740± term 9
Soldered Pꢂ° to P°B and add a force of 5.0N in the direction
as shown below.
Pꢂ°
4
Adhesive Strength
ꢂhere is no sign of exfoliation on electrode.
F
F
Glass Epoxy P°B
F=5.0N
JIS ° 5102 term 8.2
Soldered Pꢂ° to P°B
Normal appearance
Resistance change: not to exceed ±20ꢃ (*)
Vibration: A 10-55-10ꢄz (1 min.)
Width: 1.5mm
5
Vibration
Vibrate for 2 hrs. in each of ± mutually perpendicular planes
for a total of 6 hrs.
JIS ° 5102 term 8.4
Solder: Sn 6±ꢃ/Pb ±7ꢃ (or 60/40ꢃ)
Solder temp: 2±0±5ꢀ°
Soaking time: ±±0.5 secs.
Min. 75ꢃ electrode is covered with new solder.
Resistance change: not to exceed ±20ꢃ (*)
6
7
Solderability
Soaking position: Until a whole electrode is soaked
Solder: Sn 6±ꢃ/Pb ±7ꢃ (or 60/40ꢃ)
Flux: Solder paste containing less than 0.2wtꢃ of chlorine.
Preheating: 150±5ꢀ° ± mins.
Peak temp.: 260±5ꢀ° 10±5 secs. (reflow)
P°B: Glass Epoxy P°B (JIS ° 6484)
Normal appearance
Resistance change: not to exceed ±20ꢃ (*)
Soldering Heat Resistance
JIS ° 5102 term 9.±
ꢂimes: 5 cycles
Temp. (°C)
-20 +0ꢁ -±
Room temp.
+85 +±ꢁ -0
Room temp.
Step
Time (min.)
±0
10-15
±0
Normal appearance
Resistance change: not to exceed ±20ꢃ (*)
1
2
±
4
8
9
Temperature Cycling
Damp Heat
10-15
Normal appearance
Resistance change: not to exceed ±20ꢃ (*)
JIS ° 5102 term 9.5
40±2ꢀ°ꢁ 90-95ꢃRꢄ leave for 500±4 hrs.
JIS ° 5102 term 9.10
60±±ꢀ° (in air)ꢁ Pꢂ° is applied maximum operating voltage for 1.5
hrs. on and 0.5 hrs. off. ꢂhis cycle is repeated for 1000±10 hrs.
Normal appearance
Resistance change: not to exceed ±20ꢃ (*)
10 High Temperature Load
(*) Measure resistance after the test by applying voltage of less than 1.5Vdc by a direct current of less than 10mA after product is left at 25±2ꢀ° for 2 hours.
Above mentioned soldering in "4. Adhesive Strength" and "5. Vibration" is done under the following conditions at our site.
#Glass-Epoxy P° board
#Standard land dimension
#Standard solder paste
#Standard solder profile
Above conditions are mentioned in Notice.
20
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Chip Type Specifications and Test Methods
1
c PRG18/21BC Series
No.
Item
Rating Value
Method of Examination
1
Operating Temp.
ꢄ10 to 60ꢀ°
Temperature range ꢂith maximum voltage applieꢃ to PT°.
After leaving for 24 hrs. or more in 25ꢀ°C it measures ꢁb 4 ꢂire
measuring methoꢃs using the ꢃirectꢄcurrent terminal current of
10mA or less (0.1 or less Vꢃcs).
The resistance value shoulꢃ ꢁe ꢂithin the specifieꢃ
tolerance.
2
3
Resistance Value (at 25°C)
Withstanding Voltage
We applb 120ꢅ of the maximum operating voltage to PT° ꢁb
raising graꢃuallb for 180±5 secs. at 25ꢀ°. (A protective resistor
is to ꢁe connecteꢃ in seriesC anꢃ the inrush current through
PT° must ꢁe limiteꢃ ꢁeloꢂ maximum rateꢃ value.)
Without ꢃamage
EIAJ ETꢄ740± term 9
Solꢃereꢃ PT° to P°B anꢃ aꢃꢃ a force of 5.0N in the ꢃirection
as shoꢂn ꢁeloꢂ.
PT°
4
Adhesive Strength
There is no sign of exfoliation on electroꢃe.
F
F
Glass Epoxb P°B
F=5.0N
JIS ° 5102 term 8.2
Solꢃereꢃ PT° to P°B
Normal appearance
%esistance change: not to exceeꢃ ±20ꢅ (*)
Viꢁration: A 10ꢄ55ꢄ10Rz (1 min.)
Wiꢃth: 1.5mm
5
Vibration
Viꢁrate for 2 hrs. in each of ± mutuallb perpenꢃicular planes for
a total of 6 hrs.
JIS ° 5102 term 8.4
Solꢃer: Snꢄ±Agꢄ0.5°u
Solꢃer temp: 245±5ꢀ°
Soaking time: ±±0.5 secs.
Soaking position: Until a ꢂhole electroꢃe is soakeꢃ.
Min. 75ꢅ electroꢃe is covereꢃ ꢂith neꢂ solꢃer.
%esistance change: not to exceeꢃ ±20ꢅ (*)
6
7
Solderability
Solꢃer: Snꢄ±Agꢄ0.5°u
Flax: Solꢃer paste containing less than 0.2ꢂtꢅ of chlorine.
Preheating: 150±5ꢀ° ± mins.
Peak temp.: 260±5ꢀ° 10±5 secs. (refloꢂ)
P°B: Glass Epoxb P°B (JIS ° 6484)
Normal appearance
%esistance change: not to exceeꢃ ±20ꢅ (*)
Soldering Heat Resistance
8
9
Dry Heat
Cold
60±±ꢀ° leave for 1000±12 hrs.
ꢄ10±±ꢀ° leave for 1000±12 hrs.
60±2ꢀ°C 90ꢄ95ꢅ%R leave for 500±4 hrs.
10 Damp Heat
JIS ° 5102 term 9.±
Times: 5 cbcles
Normal appearance
%esistance change: not to exceeꢃ ±20ꢅ (*)
Step
Temp. (°C)
ꢄ20 +0C ꢄ±
%oom temp.
+85 +±C ꢄ0
%oom temp.
Time (min.)
±0
10ꢄ15
±0
1
2
±
4
11 Temperature Cycling
10ꢄ15
60±±ꢀ° (in air)C PT° is applieꢃ maximum operating voltage for
1.5 hrs. on anꢃ 0.5 hrs. off. This cbcle is repeateꢃ for 500±10 hrs.
12 High Temperature Load
(*) The resistance measurement after the test.
After leaving for 24 hours or more in 25±2ꢀ°C it measures ꢁb 4 ꢂire measuring methoꢃs using the ꢃirectꢄcurrent terminal current of 10mA or less (0.1 or
less Vꢃcs).
Aꢁove mentioneꢃ solꢃering in "4. Aꢃhesive Strength" anꢃ "5. Viꢁration" is ꢃone unꢃer the folloꢂing conꢃitions at our site.
#GlassꢄEpoxb P° ꢁoarꢃ
#Stanꢃarꢃ lanꢃ ꢃimension
#Stanꢃarꢃ solꢃer paste
#Stanꢃarꢃ solꢃer profile
Aꢁove conꢃitions are mentioneꢃ in Notice.
21
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection Narrow Current Band 30V Series
2
This product is a leaded type PTC thermistor
D max1
T max1
for overcurrent protection which is suitable for
a current limiting resistor.
Features
c
1. Small fluctuation in the circuit due to resistance
tolerance +/-10%
2. Narrow current range (less than twice) between
operating and non-operating current at -10 to
60 degrees C.
ød±ꢀ1ꢀ.
F±±1.
3. Quick operating time due to small size compared
with conventional products.
(in mm)
4. Best suited to meet the requirements for power
supplies and motor protection. Error-free operations
are assured by rush current.
5. Circuit is protected until current is turned off.
6. Restores the original low resistance value
automatically once the overload is removed.
7. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration
and shock because it is a solid element.
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness Height Lead
Lead
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
(T)
(H)
Space
Diameter
(A)
(ohm)
(D) (mm)
(mm)
(mm) (F) (mm) (phi d) (mm)
PTGL04AS100K2N51B0
PTGL04AS100K2B51B0
PTGL05AS3R9K2B51B0
PTGL07AS2R7K2B51B0
PTGL07AS1R8K2B51B0
PTGL09AS1R2K2B51B0
PTGL12AS0R8K2B51B0
30
30
30
30
30
30
30
122
167
269
336
420
556
685
154
212
340
425
532
704
867
205
282
452
565
708
936
1153
240
330
1.5
10 10%
4.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
9.5
9.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.5
0.6
0.6
0.6
0.6
0.6
0.6
2.0
3.5
4.5
5.0
6.0
7.0
10 10%
3.9 10%
2.7 10%
1.8 10%
1.2 10%
0.8 10%
4.5
5.5
7.3
7.3
9.3
11.5
530
10.5
12.3
12.3
14.3
16.5
663
829
1097
1352
Maximum Current shows typical capacities of the transformer which can be used.
30V Series is recognized by UL.
Taping type is also available. Please refer to the page of "Package" information for details.
Protective Threshold Current Range
c
PTGL04AS100K2N51B0
PTGL04AS100K2B51B0
28ꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
Trip current
24ꢀ
2ꢀꢀ
±6ꢀ
±2ꢀ
8ꢀ
Trip current
Protective threshold
current
Protective threshold
current
Hold current
Hold current
4ꢀ
ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page1
22
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page1
Protective Threshold Current Range
c
PTGL05AS3R9K2B51B0
PTGL07AS2R7K2B51B0
7ꢀꢀ
6ꢀꢀ
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
6ꢀꢀ
Trip current
Trip current
.ꢀꢀ
2
Protective threshold
current
Protective threshold
current
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
Hold current
Hold current
-2ꢀ
-2ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL07AS1R8K2B51B0
PTGL09AS1R2K2B51B0
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
±2ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
Trip current
Trip current
Protective threshold
current
Protective threshold
current
Hold current
Hold current
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL12AS0R8K2B51B0
±6ꢀꢀ
±2ꢀꢀ
8ꢀꢀ
4ꢀꢀ
ꢀ
Trip current
Protective threshold
current
Hold current
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Operating Time (Typical Curve)
c
PTGL04AS100K2N51B0
PTGL04AS100K2B51B0
±ꢀꢀ
±ꢀ
±ꢀꢀ
- 3ꢀ°C
- ±ꢀ°C
±ꢀ
- 3ꢀ°C
2.°C Ambient Temp1
- ±ꢀ°C
6ꢀ°C
8.°C
2.°C
6ꢀ°C
8.°C
Ambient Temp1
±
±
ꢀ1±
ꢀ1±
ꢀ1ꢀ±
ꢀ1ꢀ±
ꢀ1±
ꢀ1±
±
±ꢀ
±
±ꢀ
Overcurrent (A)
Overcurrent (A)
Continued on the following page1
23
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time (Typical Curve)
c
PTGL05AS3R9K2B51B0
PTGL07AS2R7K2B51B0
100
100
10
- 30°C
- 10°C
25°C
- 30°C
Ambient Temp.
- 10°C
2
60°C
10
25°C Ambient Temp.
60°C
85°C
85°C
1
0.1
1
0.1
0.01
0.01
0.1
1
10
0.1
1
10
Overcurrent (A)
Overcurrent (A)
PTGL07AS1R8K2B51B0
PTGL09AS1R2K2B51B0
100
10
1
100
10
1
- 30°C
- 30°C
- 10°C
- 10°C
25°C Ambient Temp.
25°C Ambient Temp.
60°C
85°C
60°C
85°C
0.1
0.1
0.1
0.1
1
10
1
10
Overcurrent (A)
Overcurrent (A)
PTGL12AS0R8K2B51B0
100
10
1
- 30°C
- 10°C
25°C Ambient Temp.
60°C
85°C
0.1
0.1
1
10
Overcurrent (A)
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection Narrow Current Band 51/60V Series
This product is a leaded type PTC thermistor
D max1
T max1
for overcurrent protection which is suitable for
a current limiting resistor.
3
Features
c
1. Small fluctuation in the circuit due to resistance
tolerance +/-10%
2. Narrow current range (less than twice) between
operating and non-operating current at -10 to
60 degrees C.
ød±ꢀ1ꢀ.
F±±1.
3. Quick operating time due to small size compared
with conventional products.
(in mm)
4. Best suited to meet the requirements for power
supplies and motor protection. Error-free operations
are assured by rush current.
5. Circuit is protected until current is turned off.
6. Restores the original low resistance value
automatically once the overload is removed.
7. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration
and shock because it is a solid element.
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness Height Lead
Lead
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
(T)
(H)
Space
Diameter
(A)
(ohm)
(D) (mm)
(mm)
(mm) (F) (mm) (phi d) (mm)
PTGL04AS100K3B51B0
PTGL05AS6R8K3B51B0
PTGL07AS3R3K3B51B0
PTGL09AS2R2K3B51B0
PTGL12AS1R2K3B51B0
PTGL04AS220K4N51B0
PTGL04AS220K4B51B0
PTGL05AS100K4B51B0
PTGL07AS5R6K4N51B0
PTGL07AS5R6K4B51B0
PTGL09AS3R3K4B51B0
PTGL12AS2R2K4B51B0
51
51
51
51
51
60
60
60
60
60
60
60
168
197
307
412
592
88
213
249
389
522
749
112
145
215
236
290
421
556
283
331
517
694
996
149
193
286
314
386
560
739
332
388
606
814
1168
175
226
335
368
452
656
867
1.0
10 10%
4.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
9.5
10.5
12.3
14.3
16.5
9.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.5
0.6
0.6
0.5
0.6
0.6
0.6
1.5
3.0
4.0
5.0
1.0
1.0
1.5
2.2
3.0
4.0
5.0
6.8 10%
3.3 10%
2.2 10%
1.2 10%
22 10%
22 10%
10 10%
5.6 10%
5.6 10%
3.3 10%
2.2 10%
5.5
7.3
9.3
11.5
4.5
4.5
5.5
7.3
7.3
9.3
11.5
115
170
186
229
333
439
9.5
10.5
12.3
12.3
14.3
16.5
Maximum Current shows typical capacities of the transformer which can be used.
51/60V Series are recognized by UL.
Taping type is also available. Please refer to the page of "Package" information for details.
25
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Protective Threshold Current Range (51V Series)
c
PTGL04AS100K3B51B0
PTGL05AS6R8K3B51B0
4ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
Trip current
Trip current
3ꢀꢀ
Protective threshold
current
Protective threshold
current
2ꢀꢀ
Hold current
Hold current
3
±ꢀꢀ
ꢀ
-2ꢀ
-2ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
8ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL07AS3R3K3B51B0
PTGL09AS2R2K3B51B0
7ꢀꢀ
6ꢀꢀ
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
Trip current
Trip current
Protective threshold
current
Protective threshold
current
Hold current
Hold current
ꢀ
2ꢀ
4ꢀ
6ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL12AS1R2K3B51B0
±4ꢀꢀ
±2ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
Trip current
Protective threshold
current
Hold current
ꢀ
2ꢀ
4ꢀ
6ꢀ
Ambient Temperature (°C)
Protective Threshold Current Range (60V Series)
c
PTGL04AS220K4N51B0
PTGL04AS220K4B51B0
2ꢀꢀ
24ꢀ
2ꢀꢀ
±6ꢀ
±2ꢀ
8ꢀ
Trip current
Trip current
±6ꢀ
Protective threshold
Protective threshold
current
current
±2ꢀ
8ꢀ
Hold current
Hold current
4ꢀ
ꢀ
4ꢀ
ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page1
26
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Protective Threshold Current Range (60V Series)
c
PTGL05AS100K4B51B0
PTGL07AS5R6K4N51B0
400
400
300
200
100
0
Trip current
Trip current
300
Protective threshold
current
Protective threshold
current
200
Hold current
3
Hold current
100
0
-20
0
20
40
60
80
-20
0
20
40
60
80
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL07AS5R6K4B51B0
PTGL09AS3R3K4B51B0
700
600
500
400
300
200
100
0
500
400
300
200
100
0
Trip current
Trip current
Protective threshold
current
Protective threshold
current
Hold current
Hold current
-20
0
20
40
60
80
-20
0
20
40
60
80
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL12AS2R2K4B51B0
1000
800
600
400
200
0
Trip current
Protective threshold
current
Hold current
-20
0
20
40
60
80
Ambient Temperature (°C)
Operating Time 51V Series (Typical Curve)
c
PTGL04AS100K3B51B0
PTGL05AS6R8K3B51B0
100
10
1
100
- 30°C
- 10°C
- 30°C
- 10°C
Ambient Temp.
25°C
60°C
85°C
Ambient Temp.
25°C
60°C
85°C
10
1
0.1
0.1
0.1
0.1
1
10
1
10
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
27
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 51V Series (Typical Curve)
c
PTGL07AS3R3K3B51B0
PTGL09AS2R2K3B51B0
100
100
10
1
- 30°C
- 30°C
- 10°C
- 10°C
25°C Ambient Temp.
25°C Ambient Temp.
60°C
60°C
85°C
85°C
10
3
1
0.1
0.1
0.1
1
10
0.1
1
10
Overcurrent (A)
Overcurrent (A)
PTGL12AS1R2K3B51B0
100
10
1
- 30°C
- 10°C
25°C Ambient Temp.
60°C
85°C
0.1
0.1
1
10
Overcurrent (A)
Operating Time 60V Series (Typical Curve)
c
PTGL04AS220K4N51B0
PTGL04AS220K4B51B0
100
10
100
- 30°C
- 10°C
25°C Ambient Temp.
60°C
- 30°C
85°C
10
- 10°C
25°C Ambient Temp.
60°C
85°C
1
1
0.1
0.1
0.01
0.1
0.01
0.01
1
10
0.1
1
Overcurrent (A)
Overcurrent (A)
PTGL05AS100K4B51B0
PTGL07AS5R6K4N51B0
100
100
10
1
- 30°C
- 30°C
- 10°C
- 10°C
25°C Ambient Temp.
25°C Ambient Temp.
60°C
85°C
60°C
85°C
10
1
0.1
0.1
0.1
0.1
1
10
1
10
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
28
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 60V Series (Typical Curve)
c
PTGL07AS5R6K4B51B0
PTGL09AS3R3K4B51B0
100
100
10
1
- 30°C
- 30°C
- 10°C
- 10°C
25°C
60°C
85°C
Ambient Temp.
25°C Ambient Temp.
60°C
10
85°C
3
1
0.1
0.1
0.1
0.1
1
10
1
10
Overcurrent (A)
Overcurrent (A)
PTGL12AS2R2K4B51B0
100
10
1
- 30°C
- 10°C
25°C Ambient Temp.
60°C
85°C
0.1
0.1
1
10
Overcurrent (A)
29
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection Narrow Current Band 140V Series
This product is a leaded type PTC thermistor
D max1
T max1
for overcurrent protection which is suitable for
a current limiting resistor.
Features
c
1. Small fluctuation in the circuit due to resistance
4
tolerance +/-10%
2. Narrow current range (less than twice) between
operating and non-operating current at -10 to
60 degrees C.
ød±ꢀ1ꢀ.
F±±1.
3. Quick operating time due to small size compared
with conventional products.
(in mm)
4. Best suited to meet the requirements for power
supplies and motor protection. Error-free operations
are assured by rush current.
5. Circuit is protected until current is turned off.
6. Restores the original low resistance value
automatically once the overload is removed.
7. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration
and shock because it is a solid element.
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness Height Lead
Lead
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
(T)
(H)
Space
Diameter
(A)
(ohm)
(D) (mm)
(mm)
(mm) (F) (mm) (phi d) (mm)
PTGL04AS560K6B51B0 140
PTGL05AS270K6B51B0 140
PTGL07AS150K6B51B0 140
PTGL09AS120K6B51B0 140
PTGL09AS7R6K6B51B0 140
PTGL12AS4R7K6B51B0 140
74
94
125
178
249
324
382
523
147
209
292
380
447
613
0.5
56 10%
4.5
4.5
4.5
4.5
4.5
4.5
4.5
9.5
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
106
148
192
227
310
134
187
244
287
393
1.0
1.5
2.0
2.2
3.5
27 10%
15 10%
12 10%
7.6 10%
4.7 10%
5.5
7.3
10.5
12.3
14.3
14.3
16.5
9.3
9.3
11.5
Maximum Current shows typical capacities of the transformer which can be used.
140V Series is recognized by UL.
Taping type is also available. Please refer to the page of "Package" information for details.
Protective Threshold Current Range
c
PTGL04AS560K6B51B0
PTGL05AS270K6B51B0
24ꢀ
±6ꢀ
Trip current
2ꢀꢀ
±6ꢀ
±2ꢀ
8ꢀ
Trip current
±2ꢀ
Protective threshold
current
Protective threshold
current
8ꢀ
Hold current
Hold current
4ꢀ
ꢀ
4ꢀ
ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page1
30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page1
Protective Threshold Current Range
c
PTGL07AS150K6B51B0
PTGL09AS120K6B51B0
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
3ꢀꢀ
Trip current
Trip current
Protective threshold
Protective threshold
current
current
2ꢀꢀ
Hold current
Hold current
±ꢀꢀ
ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
4
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09AS7R6K6B51B0
PTGL12AS4R7K6B51B0
7ꢀꢀ
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
Trip current
6ꢀꢀ
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
±ꢀꢀ
ꢀ
Trip current
Protective threshold
current
Protective threshold
current
Hold current
Hold current
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
-2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
Operating Time (Typical Curve)
c
PTGL04AS560K6B51B0
PTGL05AS270K6B51B0
±ꢀꢀ
±ꢀ
±
±ꢀꢀ
- 3ꢀ°C
- 3ꢀ°C
- ±ꢀ°C
- ±ꢀ°C
2.°C Ambient Temp1
2.°C Ambient Temp1
6ꢀ°C
8.°C
6ꢀ°C
8.°C
±ꢀ
±
ꢀ1±
ꢀ1±
ꢀ1±
ꢀ1ꢀ±
±
±ꢀ
ꢀ1±
±
Overcurrent (A)
Overcurrent (A)
PTGL07AS150K6B51B0
PTGL09AS120K6B51B0
±ꢀꢀ
±ꢀ
±
±ꢀꢀ
±ꢀ
±
- 3ꢀ°C
- 3ꢀ°C
- ±ꢀ°C
- ±ꢀ°C
2.°C Ambient Temp1
2.°C Ambient Temp1
6ꢀ°C
8.°C
6ꢀ°C
8.°C
ꢀ1±
ꢀ1±
ꢀ1±
ꢀ1±
±
±ꢀ
±
±ꢀ
Overcurrent (A)
Overcurrent (A)
Continued on the following page1
31
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time (Typical Curve)
c
PTGL09AS7R6K6B51B0
PTGL12AS4R7K6B51B0
100
100
10
1
- 30°C
- 10°C
- 30°C
- 10°C
25°C Ambient Temp.
25°C Ambient Temp.
60°C
85°C
60°C
85°C
10
1
0.1
0.1
0.1
0.1
1
10
1
10
4
Overcurrent (A)
Overcurrent (A)
32
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection 16V Series
This low-voltage, low-resistance type "POSISTOR" is
a circuit protector whose resistance value in normal
operation is very low and in abnormal situations like
motor lock or short circuit, will be increased to
restrain overcurrent. This "POSISTOR" is most
suitable for low-voltage circuits.
D max1
T max1
Features
c
1. Best suited to meet the requirements for power
supplies and motor protection. Error-free operation
is assured by rush current.
ød±ꢀ1ꢀ.
F±±1.
5
(in mm)
2. Circuit is protected until current is turned off.
3. Restores the original low resistance value
automatically once the overload is removed.
4. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration and
shock because it is a solid element.
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness Height Lead
Lead
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
(T)
(H)
Space
Diameter
(A)
(ohm)
(D) (mm)
(mm)
(mm) (F) (mm) (phi d) (mm)
PTGL05AR1R0M1B51B0
PTGL06AR0R8M1B51B0
PTGL07ARR47M1B51B0
PTGL09ARR33M1B51B0
PTGL10ARR27M1B51B0
PTGL12AR0R2M1B51B0
PTGL14ARR15M1B51B0
16
16
16
16
16
16
16
370
400
470
505
880
955
1040
1120
1570
1900
2250
2800
3360
2.0
1.0 20ꢀ
6.0
3.5
9.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
3.0
5.0
7.0
8.0
9.0
10
0.8 20ꢀ
0.47 20ꢀ
0.33 20ꢀ
0.27 20ꢀ
0.2 20ꢀ
0.15 20ꢀ
6.5
7.5
3.5
3.5
3.5
3.5
3.5
3.5
10.0
12.0
14.0
15.0
16.0
18.5
560
705
1310
1625
1900
2410
2855
680
875
9.0
800
1025
1300
1545
10.1
11.3
13.5
1000
1200
Maximum Current shows typical capacities of the transformer which can be used.
Taping type is also available(except PTGL14ARR15M1B51B0). Please refer to the page of "Package" information for details.
Protective Threshold Current Range (16V Series)
c
PTGL05AR1R0M1B51B0
PTGL06AR0R8M1B51B0
±4ꢀꢀ
±2ꢀꢀ
±4ꢀꢀ
±2ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
±ꢀꢀꢀ
Trip current
Trip current
8ꢀꢀ
Protective threshold
current
Protective threshold
current
6ꢀꢀ
4ꢀꢀ
Hold current
Hold current
2ꢀꢀ
ꢀ
-2ꢀ
-±ꢀ
ꢀ
±ꢀ
2ꢀ
3ꢀ
4ꢀ
.ꢀ
6ꢀ
7ꢀ
8ꢀ
-2ꢀ
-±ꢀ
ꢀ
±ꢀ
2ꢀ
3ꢀ
4ꢀ
.ꢀ
6ꢀ
7ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page1
33
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page1
Protective Threshold Current Range (16V Series)
c
PTGL07ARR47M1B51B0
PTGL09ARR33M1B51B0
2ꢀꢀꢀ
±8ꢀꢀ
±6ꢀꢀ
26ꢀꢀ
24ꢀꢀ
22ꢀꢀ
2ꢀꢀꢀ
±8ꢀꢀ
±6ꢀꢀ
±4ꢀꢀ
±2ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
Trip current
Trip current
±4ꢀꢀ
±2ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
Protective threshold
current
Protective threshold
current
Hold current
Hold current
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
-2ꢀ
-2ꢀ
-±ꢀ
ꢀ
±ꢀ
2ꢀ
3ꢀ
4ꢀ
.ꢀ
6ꢀ
6ꢀ
6ꢀ
7ꢀ
7ꢀ
7ꢀ
8ꢀ
8ꢀ
8ꢀ
-±ꢀ
ꢀ
±ꢀ
2ꢀ
3ꢀ
4ꢀ
.ꢀ
6ꢀ
7ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL10ARR27M1B51B0
PTGL12AR0R2M1B51B0
5
3ꢀꢀꢀ
28ꢀꢀ
26ꢀꢀ
24ꢀꢀ
22ꢀꢀ
2ꢀꢀꢀ
±8ꢀꢀ
±6ꢀꢀ
±4ꢀꢀ
±2ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
4ꢀꢀꢀ
3.ꢀꢀ
3ꢀꢀꢀ
2.ꢀꢀ
2ꢀꢀꢀ
±.ꢀꢀ
±ꢀꢀꢀ
.ꢀꢀ
Trip current
Trip current
Protective threshold
current
Protective threshold
current
Hold current
Hold current
6ꢀꢀ
4ꢀꢀ
2ꢀꢀ
ꢀ
-2ꢀ
ꢀ
-2ꢀ
-±ꢀ
ꢀ
±ꢀ
2ꢀ
3ꢀ
4ꢀ
.ꢀ
-±ꢀ
ꢀ
±ꢀ
2ꢀ
3ꢀ
4ꢀ
.ꢀ
6ꢀ
7ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL14ARR15M1B51B0
4ꢀꢀꢀ
3.ꢀꢀ
3ꢀꢀꢀ
2.ꢀꢀ
2ꢀꢀꢀ
±.ꢀꢀ
±ꢀꢀꢀ
.ꢀꢀ
Trip current
Protective threshold
current
Hold current
ꢀ
-2ꢀ
-±ꢀ
ꢀ
±ꢀ
2ꢀ
3ꢀ
4ꢀ
.ꢀ
Ambient Temperature (°C)
Operating Time 16V Series (Typical Curve)
c
PTGL05AR1R0M1B51B0
PTGL06AR0R8M1B51B0
±ꢀꢀ1ꢀ
±ꢀꢀ1ꢀ
±ꢀ1ꢀ
±1ꢀ
-±ꢀ°C
-±ꢀ°C
+2.°C Ambient
+2.°C Ambient
+6ꢀ°C
Temp1
+6ꢀ°C
Temp1
±ꢀ1ꢀ
±1ꢀ
ꢀ1±
ꢀ1±
ꢀ1±
±
±ꢀ
Overcurrent (A)
±ꢀꢀ
ꢀ1±
±
±ꢀ
Overcurrent (A)
±ꢀꢀ
Continued on the following page1
34
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 16V Series (Typical Curve)
c
PTGL07ARR47M1B51B0
PTGL09ARR33M1B51B0
100.0
100.0
10.0
1.0
-10°C
-10°C
+25°C Ambient
+25°C Ambient
+60°C
+60°C
Temp.
Temp.
10.0
1.0
0.1
0.1
0.1
1
10
Overcurrent (A)
100
0.1
1
10
Overcurrent (A)
100
PTGL10ARR27M1B51B0
PTGL12AR0R2M1B51B0
5
100.0
10.0
1.0
100.0
10.0
1.0
-10°C
-10°C
+25°C Ambient
+25°C Ambient
+60°C
Temp.
+60°C
Temp.
0.1
0.1
0.1
1
10
Overcurrent (A)
100
0.1
1
10
Overcurrent (A)
100
PTGL14ARR15M1B51B0
100.0
10.0
1.0
-10°C
+25°C Ambient
+60°C
Temp.
0.1
0.1
1
10
Overcurrent (A)
100
35
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection 24/30/32V Series
D max.
T max.
The safety resistor "POSISTOR" is most suited to meet
the requirements of the safety standard short-circuit tests
such as IEC, VDE, BS, UL, CSA, etc., worldwide.
Features
c
1. Best suited to meet the requirements of the short-
circuit test. Quick response compared with current
fuse and resistor and error-free operation are
assured.
ød
±0.0ꢀ
2. Small size save board space. Capable of being
mounted anywhere because replacement is not
required.
F±±.ꢀ
(in mm)
3. Actuates by excessive current during the short-
circuit test to restrain abnormal heat generation
in other circuit components and printed boards.
This state will be maintained until the abnormal
state is removed or power is turned off to reset
the "POSISTOR" to the original state. Surface
temperature of "POSISTOR" is kept low, below a
certain value, during the actuation.
6
4. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration
and shock because it is a solid element.
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness
Lead
Lead
Diameter
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
(T)
Space
(A)
(ohm)
(D) (mm)
(mm)
(F) (mm) (phi d) (mm)
PTGL07BD100N2B51B0
PTGL07BD6R8N2B51B0
PTGL09BD4R7N2B51B0
PTGL09BD3R3N2B51B0
PTGL09BD2R2N2B51B0
PTGL04AR130H2B51B0
PTGL07AR4R6H2B51B0
PTGL09AR1R8H2B51B0
PTGL12AR1R2H2B51B0
PTGL13AR0R8H2B71B0
PTGL07BD470N3B51B0
PTGL07BD330N3B51B0
PTGL07BD220N3B51B0
PTGL07BD150N3B51B0
24
24
24
24
24
30
30
30
30
30
32
32
32
32
80
90
124
139
216
248
326
180
340
510
645
870
55
251
296
398
461
431
350
610
970
1225
1600
115
135
160
195
320
370
500
580
710
400
700
1120
1420
1900
140
170
200
240
2.0
10 30ꢀ
7.4
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
2.0
2.0
2.0
2.0
0.7
2.0
3.0
4.3
5.5
1.5
1.5
1.5
1.5
6.8 30ꢀ
4.7 30ꢀ
3.3 30ꢀ
2.2 30ꢀ
13 25ꢀ
4.6 25ꢀ
1.8 25ꢀ
1.2 25ꢀ
0.8 25ꢀ
47 30ꢀ
33 30ꢀ
22 30ꢀ
15 30ꢀ
7.4
9.5
9.5
9.5
5.5
7.4
9.5
12.0
13.5
7.4
7.4
7.4
7.4
120
140
180
145
250
410
520
680
30
40
60
45
75
60
100
Maximum Current shows typical capacities of the transformer which can be used.
24/30/32V Series are recognized by UL (except PTGL13AR0R8H2B71B0).
Only PTGL_51B0 series are available in taping type (except PTGL12AR1R2H2B51B0). Please refer to the page of "Package" information for details.
36
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Protective Threshold Current Range (24V Series)
c
PTGL07BD100N2B51B0
PTGL07BD6R8N2B51B0
600
600
400
400
200
Trip current
Trip current
Protective threshold current
200
0
Protective threshold current
Hold current
Hold current
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09BD4R7N2B51B0
PTGL09BD3R3N2B51B0
600
600
Trip current
6
Trip current
400
200
400
200
Protective threshold current
Protective threshold current
Hold current
Hold current
0
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09BD2R2N2B51B0
±ꢀ00
±000
ꢀ00
Trip current
Protective threshold current
Hold current
0
–20
0
20
40
60
Ambient Temperature (°C)
Protective Threshold Current Range (30V Series)
c
PTGL04AR130H2B51B0
PTGL07AR4R6H2B51B0
600
800
600
400
200
0
Trip current
Trip current
400
Protective threshold current
Protective threshold current
200
Hold current
Hold current
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page.
37
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Protective Threshold Current Range (30V Series)
c
PTGL09AR1R8H2B51B0
PTGL12AR1R2H2B51B0
1500
1500
Trip current
Trip current
1000
1000
500
Protective threshold current
Protective threshold current
500
Hold current
Hold current
0
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL13AR0R8H2B71B0
2000
1500
1000
500
0
Trip current
6
Protective threshold current
Hold current
–20
0
20
40
60
Ambient Temperature (°C)
Protective Threshold Current Range (32V Series)
c
PTGL07BD470N3B51B0
PTGL07BD330N3B51B0
300
300
200
100
200
Trip current
Trip current
Protective threshold current
Hold current
100
Protective threshold current
Hold current
0
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL07BD220N3B51B0
PTGL07BD150N3B51B0
300
300
Trip current
200
100
200
100
Trip current
Protective threshold current
Hold current
Protective threshold current
Hold current
0
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
38
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Operating Time 24V Series (Typical Curve)
c
PTGL07BD100N2B51B0
PTGL07BD6R8N2B51B0
25
20
15
10
5
25
20
–10°C
25°C Ambient Temp.
60°C
15
10
5
–10°C
25°C Ambient Temp.
60°C
0
0
0
0.5
1.0
1.5
2.0
0
0.5
1.0
1.5
2.0
Overcurrent (A)
Overcurrent (A)
6
PTGL09BD4R7N2B51B0
PTGL09BD3R3N2B51B0
30
25
–10°C
25°C Ambient Temp.
60°C
25
20
15
10
5
20
15
10
5
–10°C
25°C Ambient Temp.
60°C
0
0
0
0.5
1.0
1.5
2.0
0
0.5
1.0
1.5
2.0
Overcurrent (A)
Overcurrent (A)
PTGL09BD2R2N2B51B0
70
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
0
0.5
1.0
1.5
2.0
Overcurrent (A)
39
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Operating Time 30V Series (Typical Curve)
c
PTGL04AR130H2B51B0
PTGL07AR4R6H2B51B0
70
60
50
70
60
50
40
30
20
10
0
40
–10°C
25°C
60°C
30
–10°C
25°C Ambient Temp.
60°C
Ambient Temp.
20
10
0
0
0.2
0.4
0.6
0
0.2
0.4
0.6
Overcurrent (A)
0.8
1.0
Overcurrent (A)
6
PTGL09AR1R8H2B51B0
PTGL12AR1R2H2B51B0
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
0
1.0
2.0
3.0
0
1.0
2.0
3.0
4.0
Overcurrent (A)
Overcurrent (A)
PTGL13AR0R8H2B71B0
70
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
0
1.0
2.0
3.0
4.0
5.0
Overcurrent (A)
40
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Operating Time 32V Series (Typical Curve)
c
PTGL07BD470N3B51B0
PTGL07BD330N3B51B0
25
20
15
10
5
25
20
15
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
10
5
0
0
0
0.5
1.0
1.5
0
0.5
1.0
1.5
Overcurrent (A)
Overcurrent (A)
6
PTGL07BD220N3B51B0
PTGL07BD150N3B51B0
25
20
15
10
5
25
20
15
10
5
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
0
0
0.5
1.0
1.5
0
0
0.5
1.0
1.5
Overcurrent (A)
Overcurrent (A)
Application Circuit
c
(1) Short - Circuit Test of Transistor
(2) Short - Circuit Test of Diode
PTH
PTH
R1
R2
R3
Short
C
E
+
R1
B
–
Short
AC
100V
R4
AC
100V
Continued on the following page.
41
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Application Circuit
c
(3) Short - Circuit Test of IC
(4) Short - Circuit Test of Electrolytic Capacitor
PTH
+V0
PTH
+
IC
Short
Short
–
Electrolytic
Capacitor
AC
100V
(5) Lock Test of Motor
(6) Transistor Protection Circuit
PTH
RL
PTH
RB
6
Motor
(Lock)
DC24V
M
RA
RE
C
(7) Transformer Protection Circuit
PTH
Power
Supply
42
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection 56/80V Series
"POSISTOR" is a circuit protector whose resistance
value in normal operation is very low and in abnormal
situations like overcurrent or overheating, will be
increased to restrain overcurrent. "POSISTOR" can be
used for overcurrent protection against current
fuse or temperature fuse, due to its ability to return
to its initial condition when overcurrent is removed.
D max1
T max1
Features
c
ød±ꢀ1ꢀ.
F±±1.
1. Best suited to meet the requirements for power
supplies and motor protection. Error-free
(in mm)
operations are assured by rush current.
2. Circuit is protected until current is turned off.
3. Restores the original low resistance value
automatically once the overload is removed.
4. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration
and shock because it is a solid element.
7
Applications
c
1. DC cooling fan motors in office equipment, e.g.,
computers, facsimiles, floppy disk drives and power
units.
2. DC drive motors in VTRs and cassette tape recorders.
Power transformers (at secondary winding)
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness
(T)
(mm)
Lead
Space
Lead
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
Diameter
(A)
(ohm)
(D) (mm)
(F) (mm) (phi d) (mm)
PTGL07AR220M3P51B0
PTGL07AR8R2M3P51B0
PTGL09AR150M3B51B0
PTGL10AR3R9M3P51B0
PTGL09AR4R7M3B51B0
PTGL10AR3R9M3B51B0
PTGL14AR3R3M3B71B0
PTGL05AR550H4P51B0
PTGL07AR250H4B51B0
PTGL09AR9R4H4B51B0
PTGL12AR5R6H4B71B0
PTGL13AR3R7H4B71B0
56
56
56
56
56
56
56
80
80
80
80
80
90
115
165
190
260
350
390
490
62
205
300
340
470
600
680
830
115
260
450
650
750
240
350
400
550
700
800
980
135
300
530
760
860
1.0
22 20ꢀ
7.4
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.5
4.5
4.5
4.5
4.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
5.0
7.5
7.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
130
150
210
270
300
380
50
1.0
1.2
2.0
2.0
2.0
2.5
0.7
1.0
3.0
4.3
5.5
8.2 20ꢀ
15 20ꢀ
3.9 20ꢀ
4.7 20ꢀ
3.9 20ꢀ
3.3 20ꢀ
55 25ꢀ
25 25ꢀ
9.4 25ꢀ
5.6 25ꢀ
3.7 25ꢀ
7.4
9.5
10.5
9.5
10.5
14.5
5.5
110
190
270
310
140
240
350
405
7.4
9.5
12.0
13.5
Maximum Current shows typical capacities of the transformer which can be used.
Please contact us for UL recognized products.
Only PTGL_51B0 type is available in taping type. Please refer to the page of "Package" information for details.
43
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Protective Threshold Current Range (56V Series)
c
PTGL07AR220M3P51B0
PTGL07AR8R2M3P51B0
3ꢀꢀ
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
Trip current
2ꢀꢀ
Trip current
Protective threshold current
Protective threshold current
Hold current
±ꢀꢀ
Hold current
±ꢀꢀ
ꢀ
ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
6ꢀ
6ꢀ
6ꢀ
8ꢀ
8ꢀ
8ꢀ
8ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
6ꢀ
6ꢀ
8ꢀ
8ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09AR150M3B51B0
PTGL10AR3R9M3P51B0
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
Trip current
Trip current
Protective threshold current
Hold current
Protective threshold current
2ꢀꢀ
ꢀ
7
±ꢀꢀ
ꢀ
Hold current
–2ꢀ
ꢀ
2ꢀ
4ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09AR4R7M3B51B0
PTGL10AR3R9M3B51B0
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
Trip current
Trip current
Protective threshold current
Protective threshold current
Hold current
Hold current
2ꢀꢀ
ꢀ
2ꢀꢀ
ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL14AR3R3M3B71B0
±.ꢀꢀ
±ꢀꢀꢀ
Trip current
Protective threshold current
Hold current
.ꢀꢀ
ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
Ambient Temperature (°C)
44
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Protective Threshold Current Range (80V Series)
c
PTGL05AR550H4P51B0
PTGL07AR250H4B51B0
150
400
300
200
100
0
Trip current
Trip current
100
Protective threshold current
Protective threshold current
50
Hold current
Hold current
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09AR9R4H4B51B0
PTGL12AR5R6H4B71B0
800
600
400
200
0
800
600
400
200
0
Trip current
Trip current
Protective threshold current
Protective threshold current
Hold current
Hold current
7
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL13AR3R7H4B71B0
1500
1000
500
Trip current
Protective threshold current
Hold current
0
–20
0
20
40
60
Ambient Temperature (°C)
45
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Operating Time 56V Series (Typical Curve)
c
PTGL07AR220M3P51B0
PTGL07AR8R2M3P51B0
50
40
30
20
10
0
70
60
50
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
40
30
20
10
0
0
0.2
0.4
0.6
0.8
0
0.5
1.0
1.5
2.0
Overcurrent (A)
Overcurrent (A)
PTGL09AR150M3B51B0
PTGL10AR3R9M3P51B0
25
70
60
50
40
30
20
10
0
–10°C
25°C
60°C
Ambient Temp.
7
20
15
10
5
–10°C
25°C Ambient Temp.
60°C
0
0
0.2
0.4
0.6
0.8
0
1
2
3
4
Overcurrent (A)
Overcurrent (A)
PTGL09AR4R7M3B51B0
PTGL10AR3R9M3B51B0
25
20
15
10
5
25
20
15
10
5
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
0
0
0
1
2
3
4
0
1
2
3
4
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
46
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 56V Series (Typical Curve)
c
PTGL14AR3R3M3B71B0
40
30
–10°C
25°C
60°C
Ambient Temp.
20
10
0
0
1
2
3
4
Overcurrent (A)
Operating Time 80V Series (Typical Curve)
c
PTGL05AR550H4P51B0
PTGL07AR250H4B51B0
70
60
50
40
30
70
60
50
40
30
20
10
0
7
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C
60°C
Ambient Temp.
20
10
0
0
0.2
0.4
0.6
0
0.2
0.4
0.6
0.8
1.0
Overcurrent (A)
Overcurrent (A)
PTGL09AR9R4H4B51B0
PTGL12AR5R6H4B71B0
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
0
1.0
2.0
3.0
0
1.0
2.0
3.0
4.0
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
47
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 80V Series (Typical Curve)
c
PTGL13AR3R7H4B71B0
70
60
50
40
–10°C
30
25°C Ambient Temp.
60°C
20
10
0
0
1.0
2.0
3.0
4.0
5.0
Overcurrent (A)
Application Circuit
c
(1) DC Motor Protection Circuit
(2) Transistor Protection Circuit
PTH
7
RL
PTH
RB
M
Power Supply
RA
Motor
RE
C
(3) Transformer Protection Circuit
PTH
Power
Supply
48
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection 125/140V Series
D max1
T max1
"POSISTOR" is a circuit protector whose resistance
value in normal operation is very low and in abnormal
situations like overcurrent or overheating, will be
increased to restrain overcurrent. "POSISTOR" can be
used for overcurrent protection against current fuse
or temperature fuse, due to its ability to return to
its initial condition when overcurrent is removed.
Features
c
125V Series
F±±1.
ød±ꢀ1ꢀ.
1. Best suited to meet the requirements for power
supplies and motor protection. Error-free operations
are assured by rush current.
(in mm)
2. Circuit is protected until current is turned off.
3. Restores the original low resistance value
automatically once the overload is removed.
4. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration
and shock because it is a solid element.
D max1
T max1
Applications
c
Circuit Protection :
1. Transformers
2. Transistors
8
ød
±ꢀ1ꢀ.
140V Series
3. Fluorescent Lamps
F±±1.
(in mm)
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness
Lead
Space
(F) (mm) (phi d) (mm)
Lead
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
(T)
Diameter
(A)
(ohm)
(D) (mm)
(mm)
PTGL05AR181M7P52B0
PTGL07AR750M7B52B0
PTGL09AR470M6B52B0
PTGL09AR220M6B52B0
PTGL12AR150M6B72B0
PTGL14AR100M6B72B0
PTGL18AR6R8M6B72B0
PTGL18AR4R7M6B72B0
PTGL18AR3R3M6B72B0
PTGL07AR330M6A51B0
PTGL09AR220M6C61B0
PTGL10AR150M6C61B0
PTGL12AR100M6C01B0
PTGL13AR6R8M6C01B0
PTGL16AR5R6M6C01B0
125
125
125
125
125
125
125
125
125
140
140
140
140
140
140
30
38
64
75
165
230
340
440
550
750
900
1050
230
330
400
510
670
780
0.3
180 20ꢀ
6.0
5.0
6.0
5.5
5.5
5.5
5.5
5.5
5.5
5.5
6.0
6.0
6.0
6.0
6.0
6.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
6.5
6.5
10.0
10.0
10.0
0.6
0.6
65
82
142
200
290
380
475
640
775
900
200
280
345
440
575
670
0.3
0.5
0.8
1.0
1.2
1.4
1.7
2.0
0.5
1.0
1.0
1.0
1.0
2.0
75 20ꢀ
47 20ꢀ
22 20ꢀ
15 20ꢀ
10 20ꢀ
6.8 20ꢀ
4.7 20ꢀ
3.3 20ꢀ
33 20ꢀ
22 20ꢀ
15 20ꢀ
10 20ꢀ
6.8 20ꢀ
5.6 20ꢀ
8.0
90
120
175
220
280
380
450
540
130
180
220
290
370
440
10.0
10.0
12.5
15.0
18.5
18.5
18.5
7.4
0.6
135
175
220
300
360
420
100
140
170
220
290
340
0.6
0.6
0.6
0.6
0.6
0.6
0.5
9.6
0.65
0.65
0.65
0.65
0.65
11.6
13.0
14.0
17.0
Maximum Current shows typical capacities of the transformer which can be used.
Please contact us for UL recognized products.
Only PTGL_52B0 type is available in taping type. Please refer to the page of "Package" information for details.
49
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Protective Threshold Current Range (125V Series)
c
PTGL05AR181M7P52B0
PTGL07AR750M7B52B0
±ꢀꢀ
2ꢀꢀ
±.ꢀ
±ꢀꢀ
8ꢀ
Trip current
Trip current
6ꢀ
Protective threshold current
Hold current
Protective threshold current
4ꢀ
Hold current
2ꢀ
.ꢀ
ꢀ
ꢀ
–2ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
6ꢀ
6ꢀ
6ꢀ
8ꢀ
8ꢀ
8ꢀ
8ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09AR470M6B52B0
PTGL09AR220M6B52B0
3ꢀꢀ
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
Trip current
2ꢀꢀ
Trip current
Protective threshold current
Protective threshold current
Hold current
±ꢀꢀ
Hold current
±ꢀꢀ
ꢀ
ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
8
PTGL12AR150M6B72B0
PTGL14AR100M6B72B0
.ꢀꢀ
4ꢀꢀ
3ꢀꢀ
2ꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
Trip current
Trip current
Protective threshold current
Protective threshold current
Hold current
Hold current
2ꢀꢀ
ꢀ
±ꢀꢀ
ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL18AR6R8M6B72B0
PTGL18AR4R7M6B72B0
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
±ꢀꢀꢀ
8ꢀꢀ
6ꢀꢀ
4ꢀꢀ
Trip current
Trip current
Protective threshold current
Hold current
Protective threshold current
Hold current
2ꢀꢀ
ꢀ
2ꢀꢀ
ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
8ꢀ
–2ꢀ
ꢀ
2ꢀ
4ꢀ
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page1
50
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Protective Threshold Current Range (125V Series)
c
PTGL18AR3R3M6B72B0
1200
1000
Trip current
800
Protective threshold current
600
400
Hold current
200
0
–20
0
20
40
60
80
Ambient Temperature (°C)
Protective Threshold Current Range (140V Series)
c
PTGL07AR330M6A51B0
PTGL09AR220M6C61B0
800
600
300
Trip current
200
Protective threshold current
400
200
Trip current
100
Protective threshold current
Hold current
Hold current
0
0
–20
–20
–20
0
20
40
60
60
60
80
80
80
–20
0
20
40
60
80
Ambient Temperature (°C)
8
Ambient Temperature (°C)
PTGL10AR150M6C61B0
PTGL12AR100M6C01B0
800
600
800
600
Trip current
Trip current
400
200
400
200
Protective threshold current
Hold current
Protective threshold current
Hold current
0
0
–20
0
20
40
60
80
0
20
40
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL13AR6R8M6C01B0
PTGL16AR5R6M6C01B0
800
600
800
600
Trip current
Trip current
Protective threshold current
Hold current
Protective threshold current
Hold current
400
200
400
200
0
0
–20
0
20
40
60
80
0
20
40
Ambient Temperature (°C)
Ambient Temperature (°C)
51
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Operating Time 125V Series (Typical Curve)
c
PTGL05AR181M7P52B0
PTGL07AR750M7B52B0
–10°C
25°C
60°C
Ambient Temp.
70
60
70
60
50
40
30
20
10
0
50
–10°C
25°C Ambient Temp.
60°C
40
30
20
10
0
0
0.1
0.2
0.3
0
0.1
0.2
Overcurrent (A)
0.3
0.4
Overcurrent (A)
PTGL09AR470M6B52B0
PTGL09AR220M6B52B0
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
–10°C
25°C
60°C
Ambient Temp.
8
–10°C
25°C Ambient Temp.
60°C
0
200
400
600
800
0
0.2
0.4
0.6
0.8
Overcurrent (A)
Overcurrent (A)
PTGL12AR150M6B72B0
PTGL14AR100M6B72B0
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
–10°C
25°C
60°C
Ambient Temp.
–10°C
25°C
60°C
Ambient Temp.
0
0.5
1.0
1.5
0
0.5
1.0
1.5
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
52
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 125V Series (Typical Curve)
c
PTGL18AR6R8M6B72B0
PTGL18AR4R7M6B72B0
70
60
50
40
30
20
10
0
70
60
–10°C
25°C Ambient Temp.
60°C
50
–10°C
25°C Ambient Temp.
60°C
40
30
20
10
0
0
0.5
1.0
1.5
2.0
2.5
0
1.0
2.0
3.0
4.0
5.0
Overcurrent (A)
Overcurrent (A)
PTGL18AR3R3M6B72B0
70
60
50
40
30
20
10
0
8
–10°C
25°C Ambient Temp.
60°C
0
1.0
2.0
3.0
4.0
5.0
Overcurrent (A)
Operating Time 140V Series (Typical Curve)
c
PTGL07AR330M6A51B0
PTGL09AR220M6C61B0
70
60
50
70
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
40
30
20
10
0
0
0.25
0.50
0.75
0
0.5
1.0
1.5
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
53
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 140V Series (Typical Curve)
c
PTGL10AR150M6C61B0
PTGL12AR100M6C01B0
70
60
50
70
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
40
30
20
10
0
0
0.5
1.0
1.5
0
0.5
1.0
1.5
Overcurrent (A)
Overcurrent (A)
PTGL13AR6R8M6C01B0
PTGL16AR5R6M6C01B0
70
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
8
–10°C
25°C
60°C
Ambient Temp.
0
0.5
1.0
Overcurrent (A)
1.5
0
1.0
2.0
3.0
Overcurrent (A)
54
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Application Circuit
c
(1) Transformer Protection Circuit 1)
(2) Transformer Protection Circuit 2)
PTH
PTH
D
Power
Supply
C
Power
Supply
(3) Transistor Protection Circuit
(4) Fluorescent Lamp Protection Circuit
PTH
RL
S
S
RB
Fluorescent Lamp
CH
C
Power
Source
R
C
C
RA
RE
C
PTH
8
55
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overcurrent Protection 250/265V Series
D max0
T max0
"POSISTOR" is a circuit protector whose resistance
value in normal operation is very low and in abnormal
situations like overcurrent or overheating, will be
increased to restrain overcurrent. "POSISTOR" can be
used for overcurrent protection against current fuse
or temperature fuse, due to its ability to return to
its initial condition when overcurrent is removed.
Features
c
250V Series
1. Best suited to meet the requirements for power
supplies and motor protection. Error-free operations
are assured by rush current.
+±08
–±03
F
ød±±0±ꢀ
(in mm)
2. Circuit is protected until current is turned off.
3. Restores the original low resistance value
automatically once the overload is removed.
4. Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration
and shock because it is a solid element.
D max0
T max0
ød
±±0±ꢀ
265V Series
(PTGL_1B0)
F±ꢁ0ꢀ
(in mm)
9
D max0
T max0
265V Series
(PTGL_2B0)
F±ꢁ0ꢀ
ød±±0±ꢀ
(in mm)
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness
(T)
(mm)
Lead
Space
(F) (mm) (phi d) (mm)
Lead
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
Diameter
(A)
(ohm)
(D) (mm)
PTGL07BB220N0B52A0
PTGL10BB120N0P52A0
PTGL09AR390N0B52A0
PTGL05AR151H8P52B0
250
250
250
265
90
90
100
28
29
35
60
66
68
80
80
130
130
115
35
250
250
245
65
300
300
280
78
0.5
22 30ꢀ
8.0
6.0
6.0
6.0
6.0
6.5
6.5
6.5
6.0
6.0
6.0
6.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.6
0.6
0.6
0.5
0.6
0.6
0.2
0.3
0.3
0.5
0.4
1.0
1.0
0.8
12 30ꢀ
39 30ꢀ
150 25ꢀ
180 20ꢀ
120 20ꢀ
82 20ꢀ
70 25ꢀ
65 25ꢀ
45 25ꢀ
56 20ꢀ
11.0
10.0
6.0
6.5
6.5
8.2
8.0
8.0
8.0
8.2
PTGL05AR181M9N51B0 265
PTGL05AR121M9N51B0 265
PTGL07AR820M9A51B0 265
37
60
70
47
75
85
75
125
160
162
200
165
150
185
190
220
190
PTGL07AR700H8B52B0
PTGL07AR650H8B52B0
PTGL07AR450H8B52B0
265
265
265
85
84
105
95
PTGL07AR560M9A51B0 265
Continued on the following page0
56
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page0
Max.
Voltage
(V)
Hold Current Hold Current Trip Current Trip Current
Max.
Resistance
Body
Thickness
(T)
(mm)
Lead
Lead
Diameter
Part Number
(at +60°C)
(mA)
(at +25°C)
(mA)
(at +25°C)
(mA)
(at -10°C)
(mA)
Current (at +25°C) Diameter
Space
(A)
(ohm)
(D) (mm)
(F) (mm) (phi d) (mm)
PTGL09AR390M9C61B0 265
PTGL09AR250H8B52B0
265
PTGL12AR270M9C01B0 265
PTGL12AR150H8B72B0
265
PTGL14AR180M9C01B0 265
PTGL13AR100H8B72B0
265
PTGL18AR6R0H8B72B0 265
100
118
150
165
180
200
300
130
150
200
210
230
260
380
210
290
310
400
380
480
715
240
330
360
460
440
560
830
1.2
39 20ꢀ
10.0
6.5
6.0
6.5
6.0
6.5
6.0
6.0
6.5
5.0
0.65
0.6
1.0
1.5
1.5
1.8
2.2
4.1
25 25ꢀ
27 20ꢀ
15 25ꢀ
18 20ꢀ
10 25ꢀ
6.0 25ꢀ
10.0
14.0
12.5
15.7
14.0
18.5
10.0
7.5
0.65
0.6
10.0
7.5
0.65
0.6
7.5
0.6
Maximum Current shows typical capacities of the transformer which can be used.
250/265V Series are recognized by UL.
Only PTGL_52B0 type is available in taping type. Please refer to the page of "Package" information for details.
Protective Threshold Current Range (250V Series)
c
PTGL07BB220N0B52A0
PTGL10BB120N0P52A0
400
400
300
350
300
Trip current
Trip current
250
200
200
100
Protective threshold current
Protective threshold current
150
Hold current
100
Hold current
50
0
0
–20
0
20
40
60
80
–20
0
20
40
60
80
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09AR390N0B52A0
400
300
200
9
Trip current
Protective threshold current
100
0
Hold current
–20
0
20
40
60
80
Ambient Temperature (°C)
Protective Threshold Current Range (265V Series)
c
PTGL05AR151H8P52B0
PTGL05AR181M9N51B0
80
Trip current
120
60
100
80
Protective threshold current
Trip current
40
60
Protective threshold current
Hold current
Hold current
40
20
20
0
0
–20
0
20
40
60
–20
0
20
40
60
80
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page.
57
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Protective Threshold Current Range (265V Series)
c
PTGL05AR121M9N51B0
PTGL07AR820M9A51B0
120
100
250
200
150
100
50
Trip current
80
Trip current
60
40
20
0
Protective threshold current
Protective threshold current
Hold current
Hold current
0
–20
0
20
40
60
80
–20
0
20
40
60
80
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL07AR700H8B52B0
PTGL07AR650H8B52B0
200
300
Trip current
150
200
100
Trip current
Protective threshold current
100
50
Protective threshold current
Hold current
Hold current
0
0
–20
0
20
40
60
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL07AR450H8B52B0
PTGL07AR560M9A51B0
300
9
250
Trip current
200
150
100
50
200
100
Trip current
Protective threshold current
Protective threshold current
Hold current
Hold current
0
0
–20
0
20
40
60
80
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL09AR390M9C61B0
PTGL09AR250H8B52B0
400
Trip current
300
300
200
Protective threshold current
Trip current
200
100
0
Protective threshold current
100
0
Hold current
Hold current
–20
0
20
40
60
80
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page.
58
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Protective Threshold Current Range (265V Series)
c
PTGL12AR270M9C01B0
PTGL12AR150H8B72B0
400
600
400
200
Trip current
300
Trip current
Protective threshold current
200
Protective threshold current
Hold current
100
Hold current
0
0
–20
0
20
40
60
–20
0
20
40
60
80
Ambient temperature (°C)
Ambient Temperature (°C)
PTGL14AR180M9C01B0
PTGL13AR100H8B72B0
800
600
600
400
200
0
Trip current
Trip current
400
200
Protective threshold current
Protective threshold current
Hold current
Hold current
0
–20
0
20
40
60
80
–20
0
20
40
60
Ambient Temperature (°C)
Ambient Temperature (°C)
PTGL18AR6R0H8B72B0
1500
9
1000
500
Trip current
Protective threshold current
Hold current
0
–20
0
20
40
60
Ambient Temperature (°C)
59
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Operating Time 250V Series (Typical Curve)
c
PTGL07BB220N0B52A0
PTGL10BB120N0P52A0
40
70
60
50
40
30
20
10
0
30
–10°C
25°C Ambient Temp.
60°C
20
–10°C
25°C Ambient Temp.
60°C
10
0
0.5
1.0
1.5
0.5
1.0
1.5
Overcurrent (A)
Overcurrent (A)
PTGL09AR390N0B52A0
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
9
0
0.5
1.0
1.5
2.0
Overcurrent (A)
Operating Time 265V Series (Typical Curve)
c
PTGL05AR151H8P52B0
PTGL05AR181M9N51B0
70
60
50
40
25
20
15
10
5
–10°C
25°C Ambient Temp.
60°C
30
–10°C
25°C Ambient Temp.
60°C
20
10
0
0
0
0.04
0.08
0.12
0.16
0.20
0
0.2
0.4
0.6
0.8
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
60
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 265V Series (Typical Curve)
c
PTGL05AR121M9N51B0
PTGL07AR820M9A51B0
25
20
15
10
5
25
20
15
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
10
5
0
0
0
0.5
1.0
1.5
0
0.2
0.4
0.6
0.8
Overcurrent (A)
Overcurrent (A)
PTGL07AR700H8B52B0
PTGL07AR650H8B52B0
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
9
0
0.2
0.4
0.6
0.8
1.0
0
0.2
0.4
0.6
0.8
Overcurrent (A)
Overcurrent (A)
PTGL07AR450H8B52B0
PTGL07AR560M9A51B0
70
60
50
40
30
25
20
15
10
5
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
20
10
0
0
0
0.2
0.4
0.6
0.8
1.0
1.2
0
0.5
1.0
1.5
Overcurrent (A)
Overcurrent (A)
Continued on the following page.
61
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 265V Series (Typical Curve)
c
PTGL09AR390M9C61B0
PTGL09AR250H8B52B0
70
60
50
40
30
20
10
0
25
20
15
–10°C
25°C Ambient Temp.
60°C
10
–10°C
25°C Ambient Temp.
60°C
5
0
0
0.2
0.4
0.6
0.8
1.0
0
1.0
2.0
3.0
Overcurrent (A)
Overcurrent (A)
PTGL12AR270M9C01B0
PTGL12AR150H8B72B0
70
60
50
40
30
20
10
0
25
20
15
10
5
–10°C
25°C
60°C
–10°C
25°C Ambient Temp.
60°C
Ambient Temp.
9
0
0.4
0.8
1.2
0
Overcurrent [A]
0
1.0
2.0
3.0
Overcurrent (A)
PTGL14AR180M9C01B0
PTGL13AR100H8B72B0
70
60
50
40
30
20
10
0
25
20
15
10
5
–10°C
25°C Ambient Temp.
60°C
–10°C
25°C Ambient Temp.
60°C
0
0.4
0.8
1.2
1.6
0
0
1.0
2.0
3.0
Overcurrent [A]
Overcurrent (A)
Continued on the following page.
62
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Operating Time 265V Series (Typical Curve)
Application Circuit
c
c
PTGL18AR6R0H8B72B0
(1) Transistor Protection Circuit
70
60
50
40
PTH
RL
RB
RA
RE
C
30
–10°C
25°C Ambient Temp.
60°C
20
10
0
0
1.0
2.0
3.0
4.0
Overcurrent [A]
(2) Transformer Protection Circuit 1)
(3) Transformer Protection Circuit 2)
PTH
PTH
D
Power
Supply
C
Power
Supply
9
(4) Fluorescent Lamp Protection Circuit
(5) Telecommunication Circuit
PTH
S
S
Fluorescent Lamp
Varistor
CH
C
Arrester
Telephone
or
PBX
Power
Source
R
C
C
Varistor
PTH
PTH
63
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
PTGL Series Narrow Current Band Specifications and Test Methods
No.
Item
Rating Value
Method of Examination
The temperature range with maximum voltage applied to the
POSISTORr.
1
2
Operating Temperature
Storage Temperature
-±0 to +85ꢀC
-ꢃ0 to +125ꢀC
The temperature range with zero voltage.
Resistance value is measured by applying voltage under 1.0Vdc
(by a direct current of less than 10mAꢁ at 25ꢀC. But it must be
measured after maximum voltage is applied for 180 seconds and
then is left for 2 hours at 25ꢀC.
Resistance Value (at 25°C)
Withstanding Voltage
3
4
5
Satisfies ratings
We apply AC voltage 120ꢂ that of the maximum voltage to
POSISTORr by raising voltage gradually for 180±5 seconds at
25ꢀC. (A protective resistor is to be connected in series, and
the inrush current through POSISTORr must be limited below
maximum rated value.ꢁ
No problem
Maximum current is measured in this examination. Voltage is
applied to POSISTORr for ± minutes step by step on still air
based on "Protective Threshold Current Test Conditions"
shown in next page. Stable current is measured at each step.
Satisfies ratings
(Trip Current, Hold Currentꢁ
Protective Threshold Current
The load is gradually applied to each terminal of POSISTORr
until the force of the following table in the axial direction with
fixing POSISTORr's body itself and this load is kept for 10
seconds.
Tensile Strength of Lead
Wire Terminal
6
No damage
Lead Diameter
ø0.60mm max.
ø0.65mm min.
Force
ꢃ.90N
9.80N
POSISTORr is held so that it is perpendicular to the lead wire
with the following lead hanging in the axial direction of the lead
wire.
The lead wire is slowly bent to 90ꢀ and returned.
Then it is slowly bent in the opposite direction and returned to
original state.
Bending Strength of Lead
Wire Terminal
7
Lead wire does not come off
Lead Diameter
ø0.60mm max.
ø0.65mm min.
Force
2.ꢃ5N
ꢃ.90N
The Lead wire of POSISTORr is soaked in an Isopropyl
Alcohol (JIS K 88±9ꢁ solution (about 25wtꢂꢁ of colophony (JIS
K 5902ꢁ for 5-10 sec. Each lead wire is soaked in molten solder
(JIS Z ±282 H60Aꢁ at 2±5±5ꢀC from the bottom to a point of
2.0-2.5mm for 2±0.5 seconds.
Solder is applied around the lead wire covering ±/ꢃ
or more of the circumference without gap in the axial
direction.
8
9
Solderability
The lead wire of POSISTORr is soaked in molten solder (JIS Z
±282 H60Aꢁ at ±50±10ꢀC from the bottom to a point of
2.0-2.5mm for ±.5±0.5 seconds.
After the device is left at room temperature (25ꢀCꢁ for 2ꢃ±ꢃ
hours, the resistance is then measured.
Terminal Durability of
Soldering
ΔR/R25V±15ꢂ
ΔR/R25V±20ꢂ
POSISTORr is set in an environmental chamber at 60±2ꢀC
and 90-95ꢂ humidity for 500±ꢃ hours.
After the device is left at room temperature (25ꢀCꢁ for one hour,
the resistance measurement is then performed.
10 Humidity Test
POSISTORr is set in an environmental chamber at 85±±ꢀC
with maximum voltage applied for 500±ꢃ hours. After the
device is left at room temperature (25ꢀCꢁ for one hour, the
resistance measurement is performed. (A protective resistor is
to be connected in series and the inrush current through
POSISTORr must be limited below maximum rated value.ꢁ
Load Test at High
11
ΔR/R25V±20ꢂ
ΔR/R25V±20ꢂ
Temperature
POSISTORr is set at room temperature (25±2ꢀCꢁ with
maximum voltage applied for 1 minute and then is left without
voltage applied for 5 minutes. This cycle is repeated for 100
cycles, and after the device is left at room temperature (25ꢀCꢁ
for one hour, the resistance measurement is performed. (A
protective resistor is to be connected in series and the inrush
current through POSISTORr must be limited below maximum
rated value.ꢁ
Load Cycle Test at Room
12
Temperature
Continued on the following page.
64
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
PTGL Series Narrow Current Band Specifications and Test Methods
Continued from the preceding page.
c Protective Threshold Current Test Conditions
1. Substrate
Materials: Phenol
Size: 50x50xt1.6mm
Land Pattern: Cu land without through hole
25.0
2.5
2.5
5.0
2.5
ø0.9
25.0
3.0
1.0
25.0
25.0
(in mm)
2. Measurement condition
Solder POSISTORr on the substrate, then put a
150mm3 cover surrounding POSISTORr to prevent
airflow.
3. Measurement circuit
POSISTORr
+
-
+
-
Digital
Voltmeter
Digital
Voltmeter
D.C POWER
SUPPLY
D.V
1Ω
D.V
65
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
PTGL Series Specifications and Test Methods
Item
Rating Value
Method of Examination
Continuous Operating
Temperature
The temperature range with maximum voltage applied to the
POSISTORr.
-10 to +60 3°
Resistance value is measured by applying voltage under
1.5Vdc (by a direct current of less than 10mA) at 253°.
But it must be measured after maximum voltage is applied for
180 seconds and then is left for 2 hours at 253°.
As for 16V seriesꢀ measurement probes should be connected
on the lead wire at the point within 2mm from the below side of
the forming.
Resistance Value
(at 25°C)
Satisfies ratings
Resistance should be measured by 4 wiring method.
We apply A° voltage 120ꢁ (16V Series: 110ꢁ) that of the
maximum voltage to POSISTORr by raising voltage gradually
for 180±5 seconds at 253°. (A protective resistor is to be
connected in seriesꢀ and the inrush current through
Withstanding Voltage
No problem
No damage
POSISTORr must be limited below max. rated value.)
The load is gradually applied to each terminal of POSISTORr
until the force of the following table in the axial direction with
fixing POSISTORr's body itself and this load is being kept for
10 seconds.
Tensile Strength of
Lead Wire Terminal
Lead Diameter
ø0.60mm max.
ø0.65mm min.
Force
4.90N
9.80N
POSISTORr is held so that it is perpendicular to the lead wire
with the following lead hanging in the axial direction of the lead
wire. The lead wire is slowly bent to 903 and returned. Then it is
slowly bent in the opposite direction and returned to original
state.
Bending Strength of
Lead Wire Terminal
Lead wire does not come off.
Lead Diameter
ø0.60mm max.
ø0.65mm min.
Force
2.45N
4.90N
The Lead wire of POSISTORr is soaked in an Isopropyl alcohol
(JIS K 88±9) or ethanol (JIS K 8101) solution (about 25wtꢁ) of
colophony (JIS K 5902) for 5 to 10 sec. Andꢀ each lead wire is
soaked in molten solder (JIS Z ±282 H60A) at 2±5±53° from
the bottom to a point of 2.0 to 2.5mm for 2±0.5 sec.
Solder is applied around the lead wire covering ±/4 or more of
the circumference without gap in the axial direction.
Solderability
The lead wire of POSISTORr is soaked in molten solder (JIS Z
±282 H60A) at ±50±103° from the bottom to a point of 2.0 to
2.5mm for ±.5±0.5 sec. After the device is being left at room
temperature (253°) for 24±4 hoursꢀ the resistance is measured.
Terminal Durability
of Soldering
<
ΔR/R25 ±15ꢁ
=
POSISTORr is set in an environmental chamber at 40±23°
and 90 to 95ꢁ humidity for 500±4 hours. After the device is left
at room temperature (253°) for one hourꢀ the resistance
measurement is performed.
<
Humidity Test
ΔR/R25 ±20ꢁ
=
POSISTORr is set in an environmental chamber at 60±±3°
with maximum voltage applied for 1.5 hours and then is left
without voltage applied for 0.5 hours. This cycle is repeated for
1000±10 hoursꢀ and after the device is left at room temperature
(253°) for one hourꢀ the resistance measurement is performed.
(A protective resistor is to be connected in series and the
inrush current through POSISTORr must be limited below
max. rated value.)
Load Cycle Test at
High Temperature
<
ΔR/R25 ±20ꢁ
=
66
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Inrush Current Suppression (Less than 100µF)
POSISTORr is one of lead type PTC Thermistor that is able
to support overcurrent or inrush current issue on the power
supply circuit.
D max1
T max1
It is able to integrated circuit for protection from inrush
current suppression with POSISTORr and relay or
semiconductor switch as thyristor.
c Features
1. Protection against overcurrent situations
2. Automatic reset from protective trip mode
3. Space-saving
ød±ꢀ1ꢀ.
F±±1.
(in mm)
4. Various characteristics to meet a suitable resistance
value
c Applications
POSISTORr is an integrated solution to work as both
current limit resistor and overcurrent fuse. It works as a
stable resistor in normal operation and products itself
against overcurrent situation.
It can be replaced from normal resistor or the resistor with
temperature fuses solution as Fig.1.
POSISTORr
+
+
Load
Load
-
-
Fig.1
10
POSISTORr works as normal resistor in normal condition,
and it works as protector against over current situation on
the circuit.
1. High-power switching power supply (LCD TV)
2. The power supply for inverter on outside unit for
Air-conditioner
3. The power supply for inverter type fluorescent lamp
4. Other SW type power supply
Max.
Voltage
(V)
Resistance Max. Inrush Max. Applying
Body
Diameter (D)
(mm)
Thickness
(T)
(mm)
Lead
Lead
Part Number
(at +25°C)
(ohm)
Current
(A)
Time of Inrush
(ms)
Space (F) Diameter (phi d)
(mm)
(mm)
PTGL07AS121M0N51B0
PTGL07AS181M0N51B0
PTGL07AS201M0N51B0
280
280
280
120 20ꢀ
180 20ꢀ
200 20ꢀ
8.46 peak
6.22 peak
5.66 peak
10
10
10
7.8
7.8
7.8
6.0
6.0
6.0
5.0
0.5
5.0
0.5
5.0
0.5
Max. inrush current shows the maximum inrush current value which be introduced into "POSISTOR" at operating temperature range.
Max. applying time of inrush shows the maximum applying time of inrush current value at operating temperature range.
Operating temperature range is -40 to +105°C.
Taping type of part numbers with "A0" is available.
67
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Inrush Current Suppression for High Capacitance (100µF or more)
D max.
T max.
POSISTORr is one of lead type PTC Thermistor that is able
to support overcurrent or inrush current issue on the power
supply circuit.
It is able to integrated circuit for protection from inrush
current suppression with POSISTORr and relay or
semiconductor switch as thyristor.
c Features
1. Protection against overcurrent situations
2. Automatic reset from protective trip mode
3. Space-saving
F±1.ꢀ
ød±±.±ꢀ
(in mm)
4. Various characteristics to meet a suitable resistance
value
c Applications
POSISTORr is an integrated solution to work as both
current limit resistor and overcurrent fuse. It works as a
stable resistor in normal operation and products itself
against overcurrent situation.
It can be replaced from normal resistor or the resistor with
temperature fuses solution as Fig.1.
POSISTORr
+
+
Load
Load
-
-
Fig.1
POSISTORr works as normal resistor in normal condition,
and it works as protector against over current situation on
the circuit.
1. High-power switching power supply (LCD TV)
2. The power supply for inverter on outside unit for
Air-conditioner
11
3. The power supply for inverter type fluorescent lamp
4. Other SW type power supply
Max.
Resistance Max. Inrush
Max. Charge
Max. Charge
Body
Thickness
Lead
Lead
Part Number
Voltage (at +25°C)
Current
(A)
Energy (at +60°C) Energy (at +85°C) Diameter (D)
(T) Space (F) Diameter (phi d)
(V)
(ohm)
(J)
(J)
(mm)
16.0
18.0
18.0
18.0
18.0
22.0
22.0
(mm)
(mm)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
(mm)
0.6
0.6
0.6
0.6
0.6
0.8
0.8
PTGL14AS470H0B02BZ
PTGL16AS330H0B02BZ
PTGL16AS470H0B02BZ
PTGL16AS680H0B02BZ
PTGL16AS101H0B02BZ
PTGL20AS330H0D02BZ
PTGL20AS470H0D02BZ
280
280
280
280
280
280
280
47 2ꢀ5
33 2ꢀ5
47 2ꢀ5
68 2ꢀ5
100 2ꢀ5
33 2ꢀ5
47 2ꢀ5
27 peak
39 peak
27 peak
19 peak
13 peak
39 peak
27 peak
106.9
130.8
130.8
130.8
130.8
181.7
181.7
ꢀ6.9
80.8
80.8
80.8
80.8
131.7
131.7
6.ꢀ
6.ꢀ
6.ꢀ
6.ꢀ
6.ꢀ
6.ꢀ
6.ꢀ
Max. inrush current shows the maximum applying time of inrush current value at operating temperature range.
Max charge energy is defined as the maximum charged up energy value of over 9ꢀ5.
The capacitance is calculated as the following formula.
J=CV^2/2 C: capacitance, V: peak voltage
Note: The criteria of the standard for the maximum charged up energy value of over 9ꢀ5.
If there is the difference between our definition and yours, could you ask us free?
Operating temperature range is -20 to +8ꢀ°C.
68
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Inrush Current Suppression Specifications and Test Methods
Item
Rating Value
Method of Examination
POSISTORr is set in an environmental chamber at 85 3ꢀC
and 85ꢁ humidity for 500 4 hours.
After the device is left at room temperature (25ꢀC) for one hour,
the resistance measurement is performed.
Humidity Test
ΔR/R25V 20ꢁ
ΔR/R25V 20ꢁ
POSISTORr is set in an environmental chamber at 85 3ꢀC
with maximum voltage applied for 500 4 hours.
After the device is left at room temperature (25ꢀC) for one hour,
the resistance measurement is performed.
High Temperature
Continuous Load
POSISTORr is set in a room temperature (25 2ꢀC) with
maximum voltage applied for 1 minute, and then is left without
voltage applied for 5 minutes. This cycle is repeated for 10k
cycles, and after the device is left at room temperature (25ꢀC)
for one hour, the resistance measurement is performed.
Load Cycle Test at
Room Temperature
ΔR/R25V 20ꢁ
69
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overheat Sensing Chip Tight Tolerance Type
This chip PTC Thermistor is a reflow soldering SMD type
for overheat sensing for power transistors, power
diodes and power ICs in hybrid circuits.
e
g
e
Features
c
1. SMD type is helpful for miniaturizing circuits
L
W
because of its small size and light weight.
2. Excellent thermal response due to small size
3. Solid-state construction provides excellent resistance
to mechanical vibration and impact resistance.
4. Contactless operation provides noiseless operation.
Dimensions (mm)
Part Number
L
W
T
e
g
1.0 0.0ꢀ 0.ꢀ 0.0ꢀ 0.ꢀ 0.0ꢀ 0.1ꢀ to 0.4 0.3 min.
1.6 0.1ꢀ 0.8 0.1ꢀ 0.8 0.1ꢀ 0.1 to 0.6
PRF15_RC
PRF18_RB
-
Chip Tight Tolerance Type 0402 (1005) Size
Sensing Temperature
(at 10k ohm)
(°C)
Sensing Temperature
Maximum
Voltage
(V)
Resistance
(at 25°C)
(k ohm)
Operating
Temperature Range
(°C)
Part Number
(at 100k ohm)
(°C)
PRF15AR102RB6RC
PRF15BA102RB6RC
PRF15BB102RB6RC
PRF15BC102RB6RC
PRF15BD102RB6RC
PRF15BE102RB6RC
PRF15BF102RB6RC
PRF15BG102RB6RC
135 5ꢀC
125 5ꢀC
115 5ꢀC
105 5ꢀC
95 5ꢀC
85 5ꢀC
75 5ꢀC
65 5ꢀC
150 3ꢀC
140 3ꢀC
130 3ꢀC
120 3ꢀC
110 3ꢀC
100 3ꢀC
90 3ꢀC
32
32
32
32
32
32
32
32
1
1
1
1
1
1
1
1
50ꢁ
50ꢁ
50ꢁ
50ꢁ
50ꢁ
50ꢁ
50ꢁ
50ꢁ
-40 to 160
-40 to 150
-40 to 140
-40 to 130
-40 to 120
-40 to 110
-40 to 100
-40 to 90
80 3ꢀC
This series is applied to reflow soldering.
Sensing Temperature
(at 4.7M ohm)
(°C)
Maximum
Voltage
(V)
Resistance
(at 25°C)
(k ohm)
Operating
Temperature Range
(°C)
Part Number
PRF15BB103RB6RC
130 3ꢀC
100 3ꢀC
80 3ꢀC
32
32
32
10 50ꢁ
10 50ꢁ
10 50ꢁ
-20 to 140
-20 to 110
-20 to 90
PRF15BE103RB6RC
PRF15BG103RB6RC
This series is applied to reflow soldering.
12
Chip Tight Tolerance Type 0603 (1608) Size
Sensing Temperature
(at 4.7k ohm)
(°C)
Sensing Temperature
(at 47k ohm)
(°C)
Maximum
Voltage
(V)
Resistance
(at 25°C)
(ohm)
Operating
Temperature Range
(°C)
Part Number
PRF18BB471RB5RB
PRF18BC471RB5RB
PRF18BD471RB5RB
PRF18BE471RB5RB
PRF18BF471RB5RB
PRF18BG471RB5RB
115 3ꢀC
105 3ꢀC
95 3ꢀC
85 3ꢀC
75 3ꢀC
65 3ꢀC
130 7ꢀC
120 7ꢀC
110 7ꢀC
100 7ꢀC
90 7ꢀC
32
32
32
32
32
32
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
-20 to 140
-20 to 130
-20 to 120
-20 to 110
-20 to 100
-20 to 90
80 7ꢀC
This series is applied to flow/reflow soldering.
This series is recognized by UL.
70
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overheat Sensing Chip Type
This chip PTC Thermistor is a reflow soldering SMD type
for overheat sensing for power transistors, power
diodes and power ICs in hybrid circuits.
e
g
e
Features
c
1. SMD type is helpful for miniaturizing circuits
L
W
because of its small size and light weight.
2. Excellent thermal response due to small size
3. Solid-state construction provides excellent resistance
to mechanical vibration and impact resistance.
4. Contactless operation provides noiseless operation.
Dimensions (mm)
Part Number
L
W
T
e
g
-
1.6±±.1ꢀ ±.8±±.1ꢀ ±.8±±.1ꢀ ±.1 to ±.6
2.±±±.2 1.2ꢀ±±.2 ±.9±±.2 ±.2 min. ±.ꢀ min.
PRF18_RB
PRF21_RA
Chip Type 0603 (1608) Size
Sensing Temperature
(at 4.7k ohm)
(°C)
Sensing Temperature
Maximum
Voltage
(V)
Resistance
(at 25°C)
(ohm)
Operating
Temperature Range
(°C)
Part Number
(at 47k ohm)
(°C)
PRF18AS471QB5RB
PRF18AR471QB5RB
PRF18BA471QB5RB
PRF18BB471QB5RB
PRF18BC471QB5RB
PRF18BD471QB5RB
PRF18BE471QB5RB
PRF18BF471QB5RB
PRF18BG471QB5RB
145 5ꢀC
135 5ꢀC
125 5ꢀC
115 5ꢀC
105 5ꢀC
95 5ꢀC
85 5ꢀC
75 5ꢀC
65 5ꢀC
-
32
32
32
32
32
32
32
32
32
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
-20 to 160
-20 to 160
-20 to 150
-20 to 140
-20 to 130
-20 to 120
-20 to 110
-20 to 100
-20 to 90
150 7ꢀC
140 7ꢀC
130 7ꢀC
120 7ꢀC
110 7ꢀC
100 7ꢀC
90 7ꢀC
80 7ꢀC
This series is applied to flow/reflow soldering.
This series is recognized by UL.
Chip Type 0805 (2012) Size
Sensing Temperature
Maximum
Voltage
(V)
Resistance
(at 25°C)
(ohm)
Operating
Temperature Range
(°C)
Part Number
(at 4.7k ohm)
(°C)
PRF21AS471QB5RA
PRF21AR471QB5RA
PRF21BA471QB5RA
PRF21BB471QB5RA
PRF21BC471QB5RA
PRF21BD471QB5RA
PRF21BE471QB5RA
145 5ꢀC
135 5ꢀC
125 5ꢀC
115 5ꢀC
105 5ꢀC
95 5ꢀC
32
32
32
32
32
32
32
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
470 50ꢁ
-20 to 160
-20 to 150
-20 to 140
-20 to 130
-20 to 120
-20 to 110
-20 to 100
13
85 5ꢀC
This series is applied to flow/reflow soldering.
This series is recognized by UL.
71
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Type (Related Data)
Standard Land Pattern Dimensions
Resistance - Temperature Characteristics (Typical)
c
c
Solder resist
BG
BE
BC
BA
BF
BD
BB
Chip
Land
1±±±
1±±
1±
AR
AS
b
a
(in mm)
Dimensions (mm)
Soldering
Methods
Part Number
Chip (LgW)
1.±g±.ꢀ
1.6g±.8
a
b
c
±.ꢀ ±.4-±.ꢀ ±.ꢀ
±.6-±.8 ±.6-±.7 ±.6-±.8
2.±g1.2ꢀ 1.±-1.2 ±.ꢀ-±.7 1.±-1.2
PRF15
PRF18
PRF21
Reflow Soldering
1
±.1
–2±
±
2±
4±
6±
8±
1±±
12±
14±
16±
Temperature (°C)
Overheat Protection Circuit
Temperature Sensing Circuit
c
c
+Vcc
+Vcc
RE2
R1
RL
RL1
Thermal
Connection
PTH
R1
RL2
R2
Load
RE
RE1
PTH
72
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Tight Tolerance Type (Reference Data)
Resistance - Temperature Characteristics Range
c
PRF15AR102RB6RC
PRF15BA102RB6RC
1000
100
10
1000
100
10
1
1
0.1
0.1
–40
0
0
0
40
80
120
160
160
160
200
200
200
–40
0
0
0
40
80
120
160
160
160
200
200
200
Ambient Temperature (°C)
Ambient Temperature (°C)
PRF15BB102RB6RC
PRF15BC102RB6RC
1000
1000
100
10
100
10
1
1
0.1
–40
0.1
–40
40
80
120
40
80
120
Ambient Temperature (°C)
Ambient Temperature (°C)
PRF15BD102RB6RC
PRF15BE102RB6RC
1000
100
10
1000
100
10
1
1
0.1
–40
0.1
–40
40
80
120
40
80
120
Ambient Temperature (°C)
Ambient Temperature (°C)
Continued on the following page.
73
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Tight Tolerance Type (Reference Data)
Continued from the preceding page.
Resistance - Temperature Characteristics Range
c
PRF15BF102RB6RC
PRF15BG102RB6RC
1000
100
10
1000
100
10
1
1
0.1
0.1
–40
0
40
80
120
160
200
–40
0
40
80
120
160
200
140
160
Ambient Temperature (°C)
Ambient Temperature (°C)
PRF15BB103RB6RC
PRF15BE103RB6RC
100000
10000
1000
100
100000
10000
1000
100
10
10
1
–20
1
-20
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
Ambient Temperature (°C)
Ambient Temperature (°C)
PRF15BG103RB6RC
PRF18BB471RB5RB
100000
10000
1000
100
100000
10000
1000
10
1
–20
100
–20
0
20
40
60
80
100
120
140
0
20
40
60
80
100
120
140
Ambient Temperature (°C)
Temperature (°C)
Continued on the following page.
74
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Tight Tolerance Type (Reference Data)
Continued from the preceding page.
Resistance - Temperature Characteristics Range
c
PRF18BC471RB5RB
PRF18BD471RB5RB
100000
100000
10000
10000
1000
1000
100
–20
100
–20
0
0
0
20
40
60
80
100
120
120
120
140
140
140
160
160
160
0
20
40
60
80
100
120
140
160
Temperature (°C)
Temperature (°C)
PRF18BE471RB5RB
PRF18BF471RB5RB
100000
100000
10000
10000
1000
1000
100
–20
100
–20
20
40
60
80
100
0
20
40
60
80
100
120
140
160
Temperature (°C)
Temperature (°C)
PRF18BG471RB5RB
100000
10000
1000
100
–20
20
40
60
80
100
Temperature (°C)
75
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Type (Ref. Only)
Resistance - Temperature Characteristics Range
c
PRF18/21AS471Q Type
PRF18/21AR471Q Type
100000
100000
10000
10000
1000
1000
100
–20
100
–20
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
140
160
Temperature (°C)
Temperature (°C)
PRF18/21BA471Q Type
PRF18/21BB471Q Type
100000
100000
10000
10000
1000
1000
100
–20
100
–20
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
140
160
Temperature (°C)
Temperature (°C)
PRF18/21BC471Q Type
PRF18/21BD471Q Type
100000
100000
10000
10000
1000
1000
100
–20
100
–20
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
140
160
Temperature (°C)
Temperature (°C)
Continued on the following page.
76
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Type (Ref. Only)
Continued from the preceding page.
Resistance - Temperature Characteristics Range
c
PRF18/21BE471Q Type
PRF18BF471Q Type
100000
100000
10000
10000
1000
1000
100
–20
100
–20
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
140
160
Temperature (°C)
Temperature (°C)
PRF18BG471Q Type
100000
10000
1000
100
–20
0
20
40
60
80
100
120
140
160
Temperature (°C)
77
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods
PRF15_102R Series
c
No.
Item
Creteria
Test Conditions
After applying maximum operating voltage for ꢂ mins. and
leaving for 2 hours in 25ꢀCꢁ measured by applying voltage less
than DC1.0V.
Resistance Value at 25°C
1
Within the specified range
Reference standard: IEC 60068-2-6 (1995)
· Soldered PTC to PCB (**)
· Frequency range: 10 to 55%z
· Amplitude: 1.5mm
· Sweep rate: 1 octave/min.
· Direction: X-Y-Z (ꢂ direction)
· 24 cycles in each axis
s 2ESISTANCE ꢀ2ꢁꢂꢃ CHANGEꢄ ,ESS THAN ±20± (*)
s !PPEARANCEꢄ .O DEFECTS OR ABNORMALITIES
2
Vibration
Reference standard: IEC 60068-2-58 (2004)
· Solder: Sn-ꢂ.0Ag-0.5Cu
· Solder temp.: 245±5ꢀC
3
4
Solderability
Wetting of soldering area: U95±
· Immersion time: ꢂ±0.ꢂs
Reference standard: IEC 60068-2-58 (2004)
[ Solder bath method ]
· Solder: Sn-ꢂ.0Ag-0.5Cu
· Preheat: 150±5ꢀCꢁ 90 to 120s
· Solder temp.: 260±5ꢀC
· Appearance: No defects or abnormalities
· Resistance (R25) change: Less than ±20± (*)
Resistance to Soldering Heat
· Immersion time: 10±1s
Reference standard: IEC 60068-2-2 (2007)
· Soldered PTC to PCB (**)
· (Max. operating temp.)±2ꢀC
· 1000+48/-0 hrs.
5
6
7
High Temperature Storage
Low Temperature Storage
Damp Heat, Steady State
Reference standard: IEC 60068-2-1 (2007)
· Soldered PTC to PCB (**)
· (Min. operating temp.)±ꢂꢀC
· 1000+48/-0 hrs
Reference standard: IEC 60068-2-67 (1995)
· Soldered PTC to PCB (**)
· +85±2ꢀCꢁ 85±5±R%
· 1000+48/-0 hrs
· Appearance: No defects or abnormalities
· Resistance (R25) change: Less than ±20± (*)
Reference standard: IEC 60068-2-14 (2009)
[ Test Na ]
· Soldered PTC to PCB (**)
· Transport time: <10 sec.
· Test condition: See below table
8
Thermal Shock
Step
1
2
Condition
(Min. Operating temp.)±ꢂꢀC
(Max. Operating temp.)±2ꢀC
Time
ꢂ0min.
ꢂ0min.
· Test cycle: 5 cycles
Reference standard: IEC 60068-2-2 (2007)
· Soldered PTC to PCB (**)
· (Max. operating temp.)±2ꢀC
· Applied max. voltage
9
High Temperature Load
· 1000+48/-0 hrs.
*: The resistance value after the test. It is measured by applying voltage less than DC1.0V after left at 25±2ꢀC for 2hrs.
**: Above mentioned soldering is done under the following conditions at our side.
· Glass-Epoxy PC board
· Standard land dimension
· Standard solder paste
· Standard solder profile
Above conditions are mentioned in Notice.
78
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods
c PRF15_103R Series
No.
Item
Rating value
Method of Examination
After ꢁpplyꢀig ꢃꢁaꢀꢃuꢃ operꢁtꢀig voltꢁge for ± ꢃꢀiutes ꢁid
leꢁvꢀig for 2 hours ꢁt 253Cꢂ ꢃeꢁsured by ꢁpplyꢀig voltꢁge of
less thꢁi ±VDC.
The resꢀstꢁice vꢁlue should be wꢀthꢀi the
specꢀfꢀed tolerꢁice.
Resistance Value (at 25°C)
1
Soldered PTC to PCB (**)
· Vꢀbrꢁtꢀoi: 10 to 55 to 10Rz (1ꢃꢀi.)
· Mꢁa. Aꢃplꢀtude: 1.5ꢃꢃ
Vꢀbrꢁte for 2 hours ꢀi eꢁch of ± ꢃutuꢁlly perpeidꢀculꢁr plꢁie for
ꢁ totꢁl of 6 hours.
There ꢀs io ꢁbiorꢃꢁl ꢁppeꢁrꢁice ꢁfter the test.
%esꢀstꢁice chꢁige ꢀs less thꢁi ±20ꢅ.(*)
2
3
Vibration
Thꢀs test coidꢀtꢀoi ꢀs ꢁccordꢀig to "JIS C 60068-2-6 (1ꢄꢄꢄ)."
· Solder teꢃp.: 2±0±53C
· Solder: Si 6±ꢅ/Pb ±7ꢅ (or 60/40ꢅ)
· Soꢁkꢀig tꢀꢃe: ±±0.5 secs.
· Soꢁkꢀig posꢀtꢀoi: Uitꢀl ꢁ whole electrode ꢀs soꢁked.
Thꢀs test coidꢀtꢀoi ꢀs ꢁccordꢀig to "JIS C 60068-2-58 (2006)."
Mꢀi. ꢄ5ꢅ electrode ꢀs covered wꢀth iew solder.
%esꢀstꢁice chꢁige ꢀs less thꢁi ±20ꢅ.(*)
Solderability
· Solder teꢃp.: 260±53C
· Solder: Si 6±ꢅ/Pb ±7ꢅ (or 60/40ꢅ)
· Flua: Coitꢁꢀiꢀig less thꢁi 0.2wtꢅ of chlorꢀie.
· Soꢁkꢀig tꢀꢃe: 10±1 secs.
· Soꢁkꢀig posꢀtꢀoi: Uitꢀl ꢁ whole electrode ꢀs soꢁked.
· Preheꢁtꢀig: 150±53C ± ꢃꢀis.
There ꢀs io ꢁbiorꢃꢁl ꢁppeꢁrꢁice ꢁfter the test.
%esꢀstꢁice chꢁige ꢀs less thꢁi ±20ꢅ.(*)
4
5
Soldering Heat Resistance
Thꢀs test coidꢀtꢀoi ꢀs ꢁccordꢀig to "JIS C 60068-2-58 (2006)."
· Soldered PTC to PCB. (**)
· +125±±3C leꢁve for 1000+12/-0 hrs.
Dry Heat
Thꢀs test coidꢀtꢀoi ꢀs ꢁccordꢀig to "JIS C 60068-2-2 (1ꢄꢄ5)."
· Soldered PTC to PCB. (**)
· -20±±3C leꢁve for 1000+12/-0 hrs.
6
7
Cold
· Soldered PTC to PCB. (**)
· +60±±3Cꢂ ꢄ0 to ꢄ5ꢅ%R leꢁve for 1000+12/-0 hrs.
Damp Heat
· Soldered PTC to PCB. (**)
· Cycles: 5 cycles
· Coidꢀtꢀois: See below tꢁble
There ꢀs io ꢁbiorꢃꢁl ꢁppeꢁrꢁice ꢁfter the test.
%esꢀstꢁice chꢁige ꢀs less thꢁi ±20ꢅ.(*)
Temp. (°C)
-20+0ꢂ -±
%ooꢃ teꢃp.
+125+±ꢂ -0
%ooꢃ teꢃp.
Step
Time (minute)
±0
10 to 15
±0
8
Temperature Cycling
1
2
±
4
10 to 15
· Soldered PTC to PCB. (**)
· 85±±3C (ꢀi ꢁꢀr)ꢂ loꢁd ꢃꢁa.
9
High Temperature Load
operꢁtꢀig voltꢁge for 1000+12/-0 hrs.
*: The resꢀstꢁice ꢃeꢁsureꢃeit ꢁfter the test.
It ꢀs ꢃeꢁsured by ꢁpplyꢀig voltꢁge less thꢁi ±VDC ꢁfter left ꢁt 25±23C for 2 hours.
**: Above ꢃeitꢀoied solderꢀig ꢀs doie uider the followꢀig coidꢀtꢀois ꢁt our sꢀde.
· Glꢁss-Epoay PC boꢁrd
· Stꢁidꢁrd lꢁid dꢀꢃeisꢀoi
· Stꢁidꢁrd solder pꢁste
· Stꢁidꢁrd solder profꢀle
Above coidꢀtꢀois ꢁre ꢃeitꢀoied ꢀi Notꢀce.
79
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods
c PRF18_471R Series
No.
Item
Specification
Test Condition
After ꢁꢄꢄlyꢀin ꢃꢁa. oꢄerꢁtꢀin ꢅoltꢁne for 3 ꢃꢀiꢇteꢈ ꢁid
leꢁꢅꢀin for ± ꢆoꢇrꢈ ꢀi ±52Cꢂ ꢃeꢁꢈꢇred by ꢁꢄꢄlyꢀin ꢅoltꢁne leꢈꢈ
tꢆꢁi 1.5VDC. (by ꢁ dꢀrect cꢇrreit leꢈꢈ tꢆꢁi 10ꢃA).
Tꢆe reꢈꢀꢈtꢁice ꢅꢁlꢇe ꢈꢆꢁll be wꢀtꢆꢀi tꢆe ꢈꢄecꢀfꢀed
tolerꢁice.
1
Resistance Value (25°C)
EIAJ ETꢊ7403 terꢃ ꢉ
Preꢄꢁre ꢈoldered PTC to PCB (**)
ꢁid ꢁdd tꢆe force of 5.0N ꢀi tꢆe dꢀrectꢀoi ꢁꢈ ꢈꢆowi below.
(PTC=POSISTO%r)
PTC
2
Adhesive Strength
Tꢆere ꢀꢈ io ꢈꢀni of eafolꢀꢁtꢀoi oi electrode.
F
F
'LASS %POXY 0#"
JIS C 510± terꢃ 8.±
Soldered PTC to PCB (**)
Norꢃꢁl ꢁꢄꢄeꢁrꢁice
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
Vꢀbrꢁtꢀoi: 10ꢊ55ꢊ10Rz (1 ꢃꢀi.)
Wꢀdtꢆ: 1.5ꢃꢃ
Vꢀbrꢁte for ± ꢆoꢇrꢈ. ꢀi eꢁcꢆ of 3 ꢃꢇtꢇꢁlly
ꢄerꢄeidꢀcꢇlꢁr ꢄlꢁie for ꢁ totꢁl of 6 ꢆoꢇrꢈ
3
4
Vibration Resistance
Solderability
JIS C 60068ꢊ±ꢊ±0(1ꢉꢉ6)
Solder teꢃꢄ.: ±30±52C
Solder: Si63ꢋ/Pb37ꢋ (or 60ꢋ/40ꢋ)
Soꢁkꢀin tꢀꢃe: 3±0.5 ꢈecoidꢈ
Mꢀi. ꢉ5ꢋ electrode ꢀꢈ coꢅered wꢀtꢆ iew ꢈolder.
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
Soꢁkꢀin ꢄoꢈꢀtꢀoi: Uitꢀl ꢁ wꢆole electrode ꢀꢈ ꢈoꢁked.
JIS C 60068ꢊ±ꢊ±0 (1ꢉꢉ6)
Solder teꢃꢄ.: ±60±52C
Solder: Si63ꢋ/Pb37ꢋ (or 60ꢋ/40ꢋ)
Flꢇa: coitꢁꢀiꢀin leꢈꢈ tꢆꢁi 0.±wtꢋ of cꢆlorꢀie
Soꢁkꢀin tꢀꢃe: 10±0.5 ꢈecoidꢈ
5
Soldering Heat Resistance
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
Soꢁkꢀin ꢄoꢈꢀtꢀoi: Uitꢀl ꢁ wꢆole electrode ꢀꢈ ꢈoꢁked.
Preꢆeꢁtꢀin: 150±52Cꢂ 3 ꢃꢀiꢇteꢈ
Soldered PTC to PCB. (**)
150±±2C leꢁꢅe for 1000±1± ꢆoꢇrꢈ
6
7
Dry Heat
Cold
Soldered PTC to PCB. (**)
ꢊ±0±32C leꢁꢅe for 1000±1± ꢆoꢇrꢈ
JIS C 510± terꢃ ꢉ.3
Soldered PTC to PCB. (**)
Tꢀꢃeꢈ: 5 cycleꢈ
Norꢃꢁl ꢁꢄꢄeꢁrꢁice
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
Seiꢈꢀin teꢃꢄerꢁtꢇre cꢆꢁine: iot to eaceed ±12C
Step
Temp. (°C)
ꢊ±0+0ꢂ ꢊ3
rooꢃ teꢃꢄ.
+150+3ꢂ ꢊ0
rooꢃ teꢃꢄ.
Time (min.)
30
10 to 15
30
8
9
Temperature Cycling
Damp Heat
1
±
3
4
10 to 15
Soldered PTC to PCB. (**)
+40±±2Cꢂ ꢉ0ꢊꢉ5ꢋ%R leꢁꢅe for 500±8 ꢆoꢇrꢈ
Soldered PTC to PCB. (**)
10 High Temperature Load
85±±2C (ꢀi ꢁꢀr)ꢂ loꢁd ꢃꢁa. oꢄerꢁtꢀin ꢅoltꢁne
for 1000±1± ꢆoꢇrꢈ
(*) Tꢆe reꢈꢀꢈtꢁice ꢃeꢁꢈꢇreꢃeit ꢁfter tꢆe teꢈt.
It ꢀꢈ ꢃeꢁꢈꢇred by ꢁꢄꢄlyꢀin ꢅoltꢁne leꢈꢈ tꢆꢁi 1.5VDC.
(by ꢁ dꢀrect cꢇrreit leꢈꢈ tꢆꢁi 10ꢃA.) ꢁfter left ꢁt ±5±±2C for ± ꢆoꢇrꢈ.
(**) Aboꢅe ꢃeitꢀoied ꢈolderꢀin ꢀꢈ doie ꢇider tꢆe followꢀin coidꢀtꢀoiꢈ ꢁt oꢇr ꢈꢀde.
s 'LASSꢅ%POXY 0# BOARD
s 3TANDARD LAND DIMENSIONS
s 2ECOMMENDABLE SOLDER PASTE
s 2ECOMMENDABLE SOLDER PROFILE
Aboꢅe coidꢀtꢀoiꢈ ꢁre ꢃeitꢀoied ꢀi Notꢀce.
80
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Overheat Sensing Chip Type Specifications and Test Methods
c PRF18/21_471Q Series
No.
Item
Specification
Test Condition
After ꢁꢄꢄlyꢀin ꢃꢁa. oꢄerꢁtꢀin ꢅoltꢁne for 3 ꢃꢀiꢇteꢈ ꢁid
leꢁꢅꢀin for ± ꢆoꢇrꢈ ꢀi ±52Cꢂ ꢃeꢁꢈꢇred by ꢁꢄꢄlyꢀin ꢅoltꢁne leꢈꢈ
tꢆꢁi 1.5VDC. (by ꢁ dꢀrect cꢇrreit leꢈꢈ tꢆꢁi 10ꢃA).
Tꢆe reꢈꢀꢈtꢁice ꢅꢁlꢇe ꢈꢆꢁll be wꢀtꢆꢀi tꢆe ꢈꢄecꢀfꢀed
tolerꢁice.
1
Resistance Value (25°C)
EIAJ ETꢊ7403 terꢃ ꢉ
Preꢄꢁre ꢈoldered PTC to PCB (**)
ꢁid ꢁdd tꢆe force of 5.0N ꢀi tꢆe dꢀrectꢀoi ꢁꢈ ꢈꢆowi below.
(PTC=POSISTO%r)
PTC
2
Adhesive Strength
Tꢆere ꢀꢈ io ꢈꢀni of eafolꢀꢁtꢀoi oi electrode.
F
F
'LASS %POXY 0#"
JIS C 510± terꢃ 8.±
Soldered PTC to PCB (**)
Norꢃꢁl ꢁꢄꢄeꢁrꢁice
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
Vꢀbrꢁtꢀoi: 10ꢊ55ꢊ10Rz (1 ꢃꢀi.)
Wꢀdtꢆ: 1.5ꢃꢃ
Vꢀbrꢁte for ± ꢆoꢇrꢈ. ꢀi eꢁcꢆ of 3 ꢃꢇtꢇꢁlly
ꢄerꢄeidꢀcꢇlꢁr ꢄlꢁie for ꢁ totꢁl of 6 ꢆoꢇrꢈ
3
4
Vibration Resistance
Solderability
JIS C 60068ꢊ±ꢊ±0(1ꢉꢉ6)
Solder teꢃꢄ.: ±30±52C
Solder: Si63ꢋ/Pb37ꢋ (or 60ꢋ/40ꢋ)
Soꢁkꢀin tꢀꢃe: 3±0.5 ꢈecoidꢈ
Mꢀi. ꢉ5ꢋ electrode ꢀꢈ coꢅered wꢀtꢆ iew ꢈolder.
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
Soꢁkꢀin ꢄoꢈꢀtꢀoi: Uitꢀl ꢁ wꢆole electrode ꢀꢈ ꢈoꢁked.
JIS C 60068ꢊ±ꢊ±0 (1ꢉꢉ6)
Solder teꢃꢄ.: ±60±52C
Solder: Si63ꢋ/Pb37ꢋ (or 60ꢋ/40ꢋ)
Flꢇa: coitꢁꢀiꢀin leꢈꢈ tꢆꢁi 0.±wtꢋ of cꢆlorꢀie
Soꢁkꢀin tꢀꢃe: 10±0.5 ꢈecoidꢈ
5
Soldering Heat Resistance
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
Soꢁkꢀin ꢄoꢈꢀtꢀoi: Uitꢀl ꢁ wꢆole electrode ꢀꢈ ꢈoꢁked.
Preꢆeꢁtꢀin: 150±52Cꢂ 3 ꢃꢀiꢇteꢈ
Soldered PTC to PCB. (**)
150±±2C leꢁꢅe for 1000±1± ꢆoꢇrꢈ
6
7
Dry Heat
Cold
Soldered PTC to PCB. (**)
ꢊ±0±32C leꢁꢅe for 1000±1± ꢆoꢇrꢈ
JIS C 510± terꢃ ꢉ.3
Soldered PTC to PCB. (**)
Tꢀꢃeꢈ: 5 cycleꢈ
Step
Temp. (°C)
ꢊ±0+0ꢂ ꢊ3
rooꢃ teꢃꢄ.
+150+3ꢂ ꢊ0
rooꢃ teꢃꢄ.
Time (min.)
30
10 to 15
30
8
9
Temperature Cycling
Damp Heat
Norꢃꢁl ꢁꢄꢄeꢁrꢁice
%eꢈꢀꢈtꢁice cꢆꢁine: iot to eaceed ±±0ꢋ (*)
1
±
3
4
10 to 15
Soldered PTC to PCB. (**)
+40±±2Cꢂ ꢉ0ꢊꢉ5ꢋ%R leꢁꢅe for 500±8 ꢆoꢇrꢈ
Soldered PTC to PCB. (**)
10 High Temperature Load
85±±2C (ꢀi ꢁꢀr)ꢂ loꢁd ꢃꢁa. oꢄerꢁtꢀin ꢅoltꢁne
for 1000±1± ꢆoꢇrꢈ
(*) Tꢆe reꢈꢀꢈtꢁice ꢃeꢁꢈꢇreꢃeit ꢁfter tꢆe teꢈt.
It ꢀꢈ ꢃeꢁꢈꢇred by ꢁꢄꢄlyꢀin ꢅoltꢁne leꢈꢈ tꢆꢁi 1.5VDC.
(by ꢁ dꢀrect cꢇrreit leꢈꢈ tꢆꢁi 10ꢃA.) ꢁfter left ꢁt ±5±±2C for ± ꢆoꢇrꢈ.
(**) Aboꢅe ꢃeitꢀoied ꢈolderꢀin ꢀꢈ doie ꢇider tꢆe followꢀin coidꢀtꢀoiꢈ ꢁt oꢇr ꢈꢀde.
s 'LASSꢅ%POXY 0# BOARD
s 3TANDARD LAND DIMENSIONS
s 2ECOMMENDABLE SOLDER PASTE
s 2ECOMMENDABLE SOLDER PROFILE
Aboꢅe coidꢀtꢀoiꢈ ꢁre ꢃeitꢀoied ꢀi Notꢀce.
81
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
POSISTORr for Circuit Protection
Overheat Sensing Lead Type
5.0 max.
4.0 max.
PTFM Series has been developed for protecting power
transistors, stereo main amplifiers, etc. from
overheating, and also for sensing the temperature of
other components which may be overheated.
The "POSISTOR" offers an excellent temperature
sensing ability, exhibiting a steep change in electrical
resistivity near the temperature setting. PTFL Series is
suitable for use as an air temperature sensor.
3.5±±.5
ø0.5±0.05
PTFL Series
Features
c
1. PTFM Series is a screw-fixing type and PTFL Series is a
(in mm)
lead type, providing ease of mounting.
2. Compact and light design as well as excellent
thermal response.
7.5±0.4
3.7±0.3
3.0±0.3
t0.5±0.05
3. Solid-state construction withstands mechanical
vibration and impact sufficiently.
4. Contactless operation provides a prolonged service
life, yet permits noiseless operation.
5. The operating point of "POSISTOR" is set on the
steepest point along the resistance-temperature
characteristic curve, thus performing the overheat
protective operation securely.
3.5±±.5
ø0.5±0.05
PTFM Series
6. PTFM Series and PTFL Series have the same
temperature characteristic, providing a selection
depending on the mounting method.
in mm
Resistance Value
at 25°C (max.)
(ohm)
Resistance Value
(TS-10°C) (max.)
(ohm)
Resistance Value
(TS°C) (min.)
(ohm)
Max. Voltage
(V)
Sensing Temp. (TS)
Part Number
PTF 4BH471Q2N34B0
(°C)
p
16
16
16
16
16
16
16
16
16
16
16
16
16
16
60
70
100
100
100
100
100
100
100
330
330
330
330
330
330
330
330
330
330
330
330
330
330
1.5k
1.5k
1.5k
1.5k
1.5k
1.5k
1.5k
470
470
470
470
470
470
470
2.2k
2.2k
2.2k
2.2k
2.2k
2.2k
2.2k
PTF 4BG471Q2N34B0
p
PTF 4BF471Q2N34B0
p
80
PTF 4BE471Q2N34B0
p
90
PTF 4BD471Q2N34B0
p
100
110
120
60
PTF 4BC471Q2N34B0
p
PTF 4BB471Q2N34B0
p
PTF 4BH222Q2N34B0
p
PTF 4BG222Q2N34B0
p
70
PTF 4BF222Q2N34B0
p
80
PTF 4BE222Q2N34B0
p
90
PTF 4BD222Q2N34B0
p
100
110
120
PTF 4BC222Q2N34B0
p
PTF 4BB222Q2N34B0
p
A blank is filled with type codes. (L: Lead type, M: with Lug-terminal)
Operating temperature range is -10 to TS+10°C.
14
Please contact us for UL recognized products.
82
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Resistance - Temperature Characteristics
Example of Thermal Response Time
c
c
Operating Time of POSISTOR
r
±00
4
±0
BB
BC
80
60
BD
BE
BF
BG
BH
3
PTFM04BE222Q2N34B0
±0
±0
POSISTORr
R meter
Screw
2
40
20
0
Heater
Aluminum plate
T=90°C constant
±0
±
0
±0
20
30
Time (sec.)
Relation between resistance change and time after POSISTORr
40
50
60
PTFM04BE222Q2N34B0 is installed on the part heated at a constant
–20
0
20
40
60
80
±00 ±20 ±40
temperature of 90°C (3mm thick alminum sheet) is shown in the figure above.
Temperature (°C)
Overheat Protection Circuit
Overheat Sensing Circuit
c
c
+Vcc
+Vcc
RE2
R±
RL
RL±
Thermal
Connection
PTH
R±
RL2
R2
Load
RE
RE±
PTH
Resistance - Temperature Characteristics Range (Ref. Only)
c
PTF_04BH471Q2N34B0
PTF_04BG471Q2N34B0
4
4
±0
±0
±0
±0
3
3
±0
2
2
±0
±0
±0
14
–20
0
20
40
60
80
±00 ±20 ±40
–20
0
20
40
60
80
±00 ±20 ±40
Temperature (°C)
Temperature (°C)
Continued on the following page.
83
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Resistance - Temperature Characteristics Range (Ref. Only)
c
PTF_04BF471Q2N34B0
PTF_04BE471Q2N34B0
4
4
3
2
10
10
10
10
3
10
2
10
10
10
–20
0
20
40
60
80
100 120 140
–20
0
20
40
60
80
100 120 140
Temperature (°C)
Temperature (°C)
PTF_04BD471Q2N34B0
PTF_04BC471Q2N34B0
4
4
3
2
10
10
10
10
3
10
2
10
10
10
–20
0
20
40
60
80
100 120 140
0
20
40
60
80
100 120 140 160
Temperature (°C)
Temperature (°C)
PTF_04BB471Q2N34B0
PTF_04BH222Q2N34B0
5
4
3
2
10
10
10
10
4
3
2
10
10
10
14
10
–20
0
20
40
60
80
100 120 140
0
20
40
60
80
100 120 140 160
Temperature (°C)
Temperature (°C)
Continued on the following page.
84
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Continued from the preceding page.
Resistance - Temperature Characteristics Range (Ref. Only)
c
PTF_04BG222Q2N34B0
PTF_04BF222Q2N34B0
5
5
10
10
4
4
3
2
10
10
10
10
3
10
2
10
–20
0
20
40
60
80
100 120 140
–20
0
20
40
60
80
100 120 140
Temperature (°C)
Temperature (°C)
PTF_04BE222Q2N34B0
PTF_04BD222Q2N34B0
5
5
10
10
4
3
2
4
3
2
10
10
10
10
10
10
–20
0
20
40
60
80
100 120 140
–20
0
20
40
60
80
100 120 140
Temperature (°C)
Temperature (°C)
PTF_04BC222Q2N34B0
PTF_04BB222Q2N34B0
5
5
10
10
4
3
2
4
3
2
10
10
10
10
10
10
14
0
20
40
60
80
100 120 140 160
0
20
40
60
80
100 120 140 160
Temperature (°C)
Temperature (°C)
85
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Temperature Sensor Lead Type Specifications and Test Methods
No.
1
Item
Rating Value
Satisfies specification
Method of Examination
Resistance value is measured by applying voltage under 1.5Vdc
(by a direct current of less than 10mA) in a silicone oil vessel.
Resistance Value
We apply A° voltage 120% that of the maximum voltage to
POSISTORr by raising voltage gradually for 180±5 seconds at
253°. (A protective resistor is to be connected in seriesꢁ and the
inrush current through POSISTORr must be limited beloꢀ max.
rated value.)
2
3
Withstanding Voltage
No problem
No damage
The load is gradually applied to each terminal of POSISTORr
until 4.90N in the axial-direction ꢀith fixing POSISTORr's body
itself and this load is kept for 10 seconds.
Tensile Strength of
Lead Wire Terminal
POSISTORr is held so that it is perpendicular to the lead ꢀire
ꢀith the folloꢀing load hanging in the axial direction of the lead
ꢀire. The lead ꢀire is sloꢀly bent to 903 and returned; then it is
sloꢀly bent in the opposite direction and returned to original state.
(Above mentioned procedure is done sloꢀly ꢀith one cycle.)
Bending Strength of
Lead Wire Terminal
4
5
Lead ꢀire does not come off.
Series
PTFL
PTFM
Force
2.45N
4.90N
The lead ꢀire of POSISTORr is soaked in a Isopropyl Alcohol
(JIS K 88±9) or ethanol (JIS K 8101) solution (about 25ꢀt%) of
colophony (JIS K 5902) for 5-10 sec. Andꢁ each lead ꢀire is
soaked in molten solder (JIS Z ±282 H60A) at 2±5±53° from the
bottom to a point of 2.0-2.5mm for 2±0.5 seconds.
Solder is applied around the lead ꢀire covering
±/4 or more of the circumference ꢀithout gap in
the axial-direction.
Solderability
The lead ꢀire of POSISTORr is soaked in molten solder (JIS Z
±282 H60A) at ±50±103° from the bottom to a point of 2.0-2.5
mm for ±.5±0.5 seconds. Andꢁ after the device is left at room
temperature (253°) for 24±4 hoursꢁ the resistance is measured.
Terminal Durability of
Soldering
6
7
ΔR/R25VT15%
ΔR/R25VT20%
POSISTORr is set in an environmental chamber at 40±23°
and 90-95% humidity for 500±4 hours.
And after the device is left at room temperature (253°) for one
hourꢁ the resistance measurement is performed.
Damp Heat
ΔR/R25VT20%
POSISTORr is set in an environmental chamber at 85±±3° ꢀith
maximum voltage applied for 1.5 hours and then is left ꢀithout
voltage applied for 0.5 hours.
PTH
This cycle is repeated for 1000±10 hoursꢁ and after the device is
left at room temperature (253°) for one hourꢁ the resistance
measurement is performed.
8
High Temperature Load
Rs
(A protective resistor is to be connected in series and the inrush
current through POSISTORr must be limited beloꢀ max. rated
value.)
S.W
Test circuit
14
86
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Caution (Storage and Operating Condition)
c !
This product is designed for application in an
2. Volatile or flammable gas
3. Dusty conditions
ordinary environment (normal room temperature,
humidity and atmospheric pressure). Do not use under
the following conditions because all of these factors
can deteriorate the characteristics or cause product
failure and burn-out.
4. Under vacuum, or under high or low pressure
5. Wet or humid conditions
6. Places with salt water, oils, chemical liquids or
organic solvents
1. Corrosive gas or deoxidizing gas (Chlorine gas,
Hydrogen sulfide gas, Ammonia gas, Sulfuric acid
gas, Nitric oxide gas, etc.)
7. Strong vibrations
8. Other places where similar hazardous conditions
exist
Caution (Other)
c !
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damage that may be
caused by the abnormal function or the failure of our
product.
Notice (Storage and Operating Condition)
c
To keep solderability of product from declining,
the following storage conditions are recommended.
1. Storage condition:
3. Handling after unpacking:
After unpacking, promptly reseal this product or
store it in a sealed container with a drying agent.
4. Storage place:
Temperature -10 to +40 degrees C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Do not store this product in corrosive gas
(Sulfuric acid, Chlorine, etc.) or in direct
sunlight.
Use this product within 6 months after delivery
by first-in and first-out stocking system.
Notice (Soldering and Mounting)
c
PTGL Series
When the lead of this product is soldered, observe
the following points to avoid the decline of element
characteristics or break-down of the element.
1. Use rosin type flux or non-activated flux
2. Do not dip the body into flux (flux should be
coated to lead wire only for soldering).
3. Be sure that preheating does not melt the
soldering of this product.
Notice (Soldering and Mounting)
c
PTFL/PTFM Series
1. PTFM Series is to be screwed beside the Power-
Transistor on the radiative plate.
4. When the lead of this product is soldered, observe
the following points to avoid the decline of
element characteristics or break-down of the
element.
2. If PTFL Series is to be mounted with thermal cement,
the cement should not be of the Cyano Acrylate
family.
(1) Use rosin type flux or non-activated flux.
(2) Do not dip the body into flux.
(Flux should be coated to lead wire only for
soldering.)
3. Please bend the lead wire far from the root of the
body and do not apply force to the lead wire of
the product.
(3) Be sure that preheating does not melt the
soldering of this product.
87
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Notice (Soldering and Mounting) PRG Series
c
1. Solder and Flux
(1) Solder Paste
(2) Flux
Use rosin type flux in the soldering process.
Use solder paste Sn:Pb=63:37wt%.
For your reference, we are using
If the flux below is used, some problems might be
caused in the product characteristics and reliability.
Please do not use these types of flux.
s 3TRONG ACIDIC FLUX ꢀWITH HALIDE CONTENT EXCEEDING
0.2wt%).
63Sn/37Pb RMA9086 90-3-M18,
manufactured by Alpha Metals Japan Ltd.
96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V,
manufactured by Senju Metal Industry Co., LTD for any
internal tests of this product.
s 7ATERꢅSOLUBLE FLUX
(*Water-soluble flux can be defined as non-rosin type
flux including wash-type flux and non-wash-type flux.)
2. Cleaning Conditions
To remove the flux after soldering, observe the following
points in order to avoid deterioration of the characteristics
or any change to the external electrodes' quality.
Solvent
Dipping Cleaning
Ultrasonic Cleaning
Drying
Less than 5 minutes
at room temp.
or
Less than 2 minutes
at 40˚C max.
Less than 1 minute
20W/L Frequency
of several 10kHz
to 100kHz.
After cleaning,
promptly dry
this product.
2-propanol
A sufficient cleaning should be applied to remove flux completely.
3. Soldering Conditions
In your mounting process, observe the following points in
order to avoid deterioration of the characteristics or
destruction of this product. The mounting quality of this
product may also be affected by the mounting conditions,
shown in the points below.
This product is for reflow soldering only. Flow soldering
should not be allowed.
(1) Printing Conditions of Solder Paste
(a) Standard thickness of solder paste printing should
be from 0.15 to 0.20 mm.
E
T
(b) After soldering, the solder fillet should be a height
from 0.2 mm to the thickness of this product (see the
figure at right).
Solder
Electrode
Solder
(c) Too much solder result in excessive mechanical
stress to this product. Such stress may cause
cracking or other mechanical damage. Also, it can
destroy the electrical performance of this product.
0.2mm V T V E
Continued on the following page.
88
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Continued from the preceding page.
(2) Allowable Soldering Temperature and Time
(a) Solder within the temperature and time
combinations, indicated by the slanted lines in the
graphs at right.
Allowable Reflow Soldering Temp. and Time
270
260
250
(b) Excessive soldering conditions may cause
dissolution of metallization or deterioration of
solder-wetting on the external electrode.
(c) In the case of repeated soldering, the accumulated
soldering time should be within the range shown at
right. (For example, Reflow peak temperature: 260°C,
twice –> The accumulated soldering time at 260°C is
within 15sec.)
240
230
220
210
200
0
10
20
30
40
50
60
Time (second)
(3) Standard Temperature Profile for Soldering
(a) Insufficient preheating may cause a crack on the
ceramic body. The difference between preheating
temperature and maximum temperature in the profile
should be 100°C.
Reflow Soldering Conditions
Gradual cooling
(in air)
Preheating (in air)
Soldering
240°C
200
(b) Rapid cooling by dipping in solvent or by other
means is not recommended.
100
0
*20 sec.
1 to 2 min.
Preheating: 150 10°C, 1 to 2 minutes
Soldering: 240°C, 20 sec.
* In the case of repeated soldering, the accumulated soldering
time should be within the range shown in "(2) Allowable
Soldering Temperature and Time."
(4) There may be a risk of unexpected failures
(tombstone, insufficient solder-wetting, etc.) in the
mounting process, caused by the mounting conditions.
Please make sure that this product is correctly
mounted under the specified mounting conditions.
89
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Notice (Soldering and Mounting) PRF15_102R Series
c
1. Solder and Flux
(1) Solder Paste
(2) Flux
Use rosin type flux in soldering process.
Use solder paste Sn:Pb=63:37wt%.
For your reference, we are using
If below flux is used, some problems might be caused
in the product characteristics and reliability.
Please do not use below flux.
63Sn/37Pb RMA9086 90-3-M18,
manufactured by Alpha Metals Japan Ltd.
96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V,
manufactured by Senju Metal Industry Co., LTD for any
Internal tests of this product.
s 3TRONG ACIDIC FLUX ꢀWITH HALIDE CONTENT EXCEEDING
0.2wt%).
s 7ATERꢅSOLUBLE FLUX
(*Water-soluble flux can be defined as non rosin type
flux including wash-type flux and non-wash-type flux.)
2. Cleaning Conditions and Drying
To remove the flux after soldering, observe the following
points in order to avoid deterioration of the characteristics
or any change to the external electrodes quality.
(1) Cleaning Conditions
Solvent
Dipping Cleaning
Ultrasonic Cleaning
Less than 5 minutes
at room temp.
or
Less than 2 minutes
at 40˚C max.
Less than 1 minute
20W/L Frequency
of several 10kHz
to 100kHz.
2-propanol
A sufficient cleaning should be applied to remove flux completely.
(2) Drying
After cleaning, promptly dry this product.
3. Soldering Conditions
In your mounting process, observe the following points in
order to avoid deterioration of the characteristics or
destruction of this product. The mounting quality of this
product may also be affected by the mounting conditions,
shown in the points below.
This product is for reflow soldering only. Flow soldering
should not be allowed.
(1) Printing Conditions of Solder Paste
(a) Standard thickness of solder paste printing should
be from 0.10 to 0.15 mm.
E
T
(b) After soldering, the solder fillet should be a height
from 0.15 mm to the thickness of this product (see the
figure at right).
Solder
Electrode
Solder
(c) Too much solder gives too strong mechanical stress
to this product. Such stress may cause cracking or
other mechanical damage. Also, it can destroy the
electrical performance of this product.
0.15mm V T V E
Continued on the following page.
90
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Continued from the preceding page.
(2) Reflow soldering conditions
The following figure and table show our recommended
reflow profile.
Temp. (°C)
270°C
250°C
(a) Insufficient preheating may cause a crack on
ceramic body. The temperature difference between
preheat and peak should be control within 100°C to
prevent this.
220°C
Limit Profile
180°C
150°C
(b) The excessive soldering conditions may cause
dissolution of metallization or deterioration of
solder-wetting on the external electrode.
(c) Rapid cooling by dipping in solvent or by other
means is not recommended.
Standard Profile
Time (s)
90 30s
30 to 60s
(d) Please evaluate it on your condition if you will do
mounting using not applying condition to the
above-mentioned.
90s
Standard Profile
Limit Profile
150 to 180°C, 90 30s
Preheat
Soldering Time (U220°C)
Peak Temp.
30 to 60s
250°C
90s
270°C
Reflow Cycle
Max. 2 times
Max. 2 times
(3) There may be a risk of unexpected failures
(tombstone, insufficient solder-wetting, etc.) in the
mounting process, caused by the mounting conditions.
Please make sure that this product is correctly
mounted under specified mounting conditions.
91
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Notice (Soldering and Mounting) PRF15_103R Series
c
1. Solder and Flux
(1) Solder Paste
(2) Flux
Use rosin type flux in soldering process.
Use solder paste Sn:Pb=63:37wt%.
For your reference, we are using
If below flux is used, some problems might be caused
in the product characteristics and reliability.
Please do not use below flux.
63Sn/37Pb RMA9086 90-3-M18,
manufactured by Alpha Metals Japan Ltd.
96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V,
manufactured by Senju Metal Industry Co., LTD for any
Internal tests of this product.
s 3TRONG ACIDIC FLUX ꢀWITH HALIDE CONTENT EXCEEDING
0.2wt%).
s 7ATERꢅSOLUBLE FLUX
(*Water-soluble flux can be defined as non rosin type
flux including wash-type flux and non-wash-type flux.)
2. Cleaning Conditions and Drying
To remove the flux after soldering, observe the following
points in order to avoid deterioration of the characteristics
or any change to the external electrodes quality.
(1) Cleaning Conditions
Solvent
Dipping Cleaning
Ultrasonic Cleaning
Less than 5 minutes
at room temp.
or
Less than 2 minutes
at 40˚C max.
Less than 1 minute
20W/L Frequency
of several 10kHz
to 100kHz.
2-propanol
A sufficient cleaning should be applied to remove flux completely.
(2) Drying
After cleaning, promptly dry this product.
3. Soldering Conditions
In your mounting process, observe the following points in
order to avoid deterioration of the characteristics or
destruction of this product. The mounting quality of this
product may also be affected by the mounting conditions,
shown in the points below.
This product is for reflow soldering only. Flow soldering
should not be allowed.
(1) Printing Conditions of Solder Paste
(a) Standard thickness of solder paste printing should
be from 0.10 to 0.15 mm.
E
T
(b) After soldering, the solder fillet should be a height
from 0.15 mm to the thickness of this product (see the
figure at right).
Solder
Electrode
Solder
(c) Too much solder gives too strong mechanical stress
to this product. Such stress may cause cracking or
other mechanical damage. Also, it can destroy the
electrical performance of this product.
0.15mm V T V E
Continued on the following page.
92
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Continued from the preceding page.
(2) Allowable Soldering Temperature and Time
(a) Solder within the temperature and time
combinations, indicated by the slanted lines in the
graphs at right.
Allowable Reflow Soldering Temp. and Time
280
270
260
250
240
230
220
210
(b) The excessive soldering conditions may cause
dissolution of metallization or deterioration of
solder-wetting on the external electrode.
(c) In case of repeated soldering, the accumulated
soldering time should be within the range shown
below figure. ( For example, Reflow peak temperature:
260°C, twice –> The accumulated soldering time at
260°C is within 30 sec. )
0
10 20 30 40 50 60 70 80 90 100110
Time (sec.)
(3) Standard Temperature Profile for Soldering
(a) Insufficient preheating may cause a crack on
ceramic body. Difference between preheating
temperature and maximum temperature in the profile
should be 100°C.
Reflow Soldering Conditions
Gradual cooling
(in air)
Preheating (in air)
Soldering
250°C
200
(b) Rapid cooling by dipping in solvent or by other
means is not recommended.
100
0
*20 sec.
1 to 2 min.
Preheating: 150 10°C, 1 to 2 minutes
Soldering: 250°C, 20 seconds
* In case of repeated soldering, the accumulated soldering
time should be within the range shown above figure (2).
(4) There may be a risk of unexpected failures
(tombstone, insufficient solder-wetting, etc.) in the
mounting process, caused by the mounting conditions.
Please make sure that this product is correctly
mounted under specified mounting conditions.
93
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Notice (Soldering and Mounting) PRF18/21 Series
c
1. Solder and Flux
(1) Solder Paste
(2) Flux
Use rosin type flux in the soldering process.
(a) Flow Soldering: Use Sn:Pb=60:40wt%,
Sn:Pb=63:37wt%, Sn:Ag:Cu=96.5:3.0:0.5wt% or
equivalent type of solder.
If the flux below is used, some problems might be
caused in the product characteristics and reliability.
Please do not use these types of flux.
s 3TRONG ACIDIC FLUX ꢀWITH HALIDE CONTENT EXCEEDING
0.2wt%).
(b) Reflow Soldering: Use Sn:Pb=60:40wt%,
Sn:Pb=63:37wt%, Sn:Ag:Cu=96.5:3.0:0.5wt% or
equivalent type of solder paste.
For your reference, we are using "63Sn/37Pb
RMA9086 90-3-M18," manufactured by Alpha Metals
Japan Ltd., "96.5Sn/3.0Ag/0.5Cu
s 7ATERꢅSOLUBLE FLUX
(*Water-soluble flux can be defined as non-rosin type
flux including wash-type flux and non-wash-type flux.)
M705-GRN360-K2-V," manufactured by Senju Metal
Industry Co., Ltd. for any internal tests of this product.
2. Cleaning Conditions and Drying
To remove the flux after soldering, observe the following
points in order to avoid deterioration of the characteristics
or any change to the external electrodes' quality.
(1) Cleaning Conditions
Solvent
Dipping Cleaning
Ultrasonic Cleaning
Less than 5 minutes
at room temp.
or
Less than 2 minutes
at 40˚C max.
Less than 1 minute
20W/L Frequency
of several 10kHz
to 100kHz.
2-propanol
A sufficient cleaning should be applied to remove flux completely.
(2) Drying
After cleaning, promptly dry this product.
3. Soldering Conditions
In your mounting process, observe the following points in
order to avoid deterioration of the characteristics or
destruction of this product. The mounting quality of this
product may also be affected by the mounting conditions,
shown in the points below.
(1) Printing Conditions of Solder Paste
(a) Recommended thickness of solder paste printing
should be from 0.15 to 0.20mm.
(b) After soldering, the solder fillet should be a height
from 0.2 mm to the thickness of this product (see the
figure at right).
E
T
Solder
Electrode
Solder
(c) Too much solder result in excessive mechanical
stress on this product. Such stress may cause
cracking or other mechanical damage. Also, it can
destroy the electrical performance of this product.
0.2mm V T V E
Continued on the following page.
94
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Continued from the preceding page.
(2) Adhesive Application and Curing
(3) Allowable Soldering Temperature and Time
(a) Solder within the temperature and time
combinations, indicated by the slanted lines in the
following graphs.
(a) If insufficient adhesive is applied, or if the adhesive
is not sufficiently hardened, this product may have a
loose contact with the land, during flow soldering.
(b) Too low viscosity of adhesive causes this product to
slip on the board, after mounting.
(b) Excessive soldering conditions may cause
dissolution of metallization or deterioration of
solder-wetting on the external electrode.
(c) In the case of repeated soldering, the accumulated
soldering time should be within the range shown in
the figures below. (For example, Reflow peak
temperature: 260°C, twice –> The accumulated
soldering time at 260°C is within 30sec.)
Allowable Flow Soldering Temp. and Time
Allowable Reflow Soldering Temp. and Time
280
270
270
260
250
240
230
220
210
260
250
240
230
220
210
200
0
10
20
30
0
10 20 30 40 50 60 70 80 90 100110
Time (sec.)
Time (sec.)
(4) Recommendable Temperature Profile for Soldering
(a) Insufficient preheating may cause a crack on the
ceramic body. The difference between preheating
temperature and maximum temperature in the profile
should be 100°C.
(b) Rapid cooling by dipping in solvent or by other
means is not recommended.
Flow Soldering Conditions
Reflow Soldering Conditions
Gradual cooling
Gradual cooling
(in air)
Preheating (in air)
Soldering
250°C
Preheating (in air)
Soldering
250°C
(in air)
200
100
200
100
0
0
*3 sec.
1 to 2 min.
*20 sec.
1 to 2 min.
Preheating: 150 10°C, 1-2 minutes.
Soldering: 250°C, 3 sec.
Preheating: 150 10°C, 1-2 minutes.
Soldering: 250°C, 20 sec.
* In the case of repeated soldering, the accumulated soldering
time should be within the range shown in "(3) Allowable
Soldering Temperature and Time."
* In the case of repeated soldering, the accumulated soldering
time should be within the range shown in "(3) Allowable
Soldering Temperature and Time."
(5) There may be a risk of unexpected failures
(tombstone, insufficient solder-wetting, etc.) in the
mounting process caused by mounting conditions.
Please make sure that this product is correctly mounted
under the specified mounting conditions.
95
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Caution/Notice
!
Notice (Handling)
c
PTGL Series
1. Do not apply an excessive force to the lead.
Otherwise, it may cause the junction between lead
and element to break, or may crack the element.
Therefore, holding the element side lead wire is
recommended when lead wire is bent or cut.
2. This product does not have waterproof construction.
Splashed water may cause failure mode such as
decline of characteristics or current leak.
3. When this product is operated, the temperature of some
areas may be over 100 to 160 degrees C. Be sure that
surrounding parts and inserting material can
withstand the temperature. If the surrounding part
and material are kept under such conditions, they
may deteriorate or produce harmful gas
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.), and
such harmful gas may deteriorate the element.
Notice (Handling)
c
PTFL/PTFM Series
1. Do not apply an excessive force to the lead.
Otherwise, it may cause the junction between lead
and element to break, or may crack the element.
Therefore, holding the element side lead wire is
recommended when lead wire is bent or cut.
2. This product does not have waterproof construction.
Splashed water may cause failure mode such as
decline of characteristics or current leak.
Notice (Handling)
c
PRG/PRF Series
1. When this product is operated, the temperature of some
area may be over 100 to 150 degrees C. Be sure that
surrounding parts and inserting material can
withstand the temperature. If the surrounding parts
and material are kept under such conditions, they
may deteriorate or produce harmful gas
2. Do not assemble this product with air-sealing or resin
casting. Such sealing may deteriorate element.
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.), and
such harmful gas may deteriorate the element.
96
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Chip Type PRG/PRF Series Package
c Minimum Quantity Guide
Quantity (pcs.)
Part Number
Paper Tape
Embossed Tape
PRF15_RC
PR*18_RB
PR*21_RA
PR*21_RK
-
10,000
4,000
-
-
-
4,000
3,000
c Tape Dimensions
PRF15_RC Series: Paper Tape
PR*18_RB Series: Paper Tape
2.0 0.1
W0.1
Y0
W0.1
0.8 max.
4.0 0.1
2.0 0.05 4.0 0.1
4.0 0.1
1.1 max.
ø1.5
ø1.5
Y0
*1.05
*0.65 * Reference Value
Direction of feed
* Reference Value
Direction feed
PR*21_RA Series: Embossed Tape
PR*21_RK Series: Embossed Tape
1.1
0.2
1.30 0.05
0.25 0.05
2.0 0.1
2.0 0.1
W0.1
W0.1
4.0 0.1
4.0 0.1
4.0 0.1
4.0 0.1
ø1.5
ø1.5
Y0
Y0
1.45
1.45 0.1
W0.3
ø1.0 0.1
Direction feed
Direction feed
ø1.0
Y0
(in mm)
c Reel Dimensions
Reel Dimensions
2.0 0.5
ø13.0 0.2
ø21.0 0.8
W1.0
Y0
9.0
13.0 1.0
W0
Y1.5
ø180
(in mm)
97
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Lead Type PTGL/PTF Series Package
c
Minimum Order Quantity (for Overcurrent Protection)
Bulk Type
Ammo Pack Taping Type
Bulk Type
Part Number
Ammo Pack Taping Type
Series
Series
Part Number
Min. Qty.
Part Number
Min. Qty.
Min. Qty.
Part Number
Min. Qty.
PTGL05AR550H4P51B0
PTGL07AR250H4B51B0
PTGL09AR9R4H4B51B0
PTGL12AR5R6H4B71B0
PTGL13AR3R7H4B71B0
PTGL05AR181M7P52B0
PTGL07AR750M7B52B0
PTGL09AR470M6B52B0
PTGL09AR220M6B52B0
PTGL12AR150M6B72B0
PTGL14AR100M6B72B0
PTGL18AR6R8M6B72B0
PTGL18AR4R7M6B72B0
PTGL18AR3R3M6B72B0
PTGL07AR330M6A51B0
PTGL09AR220M6C61B0
PTGL10AR150M6C61B0
PTGL12AR100M6C01B0
PTGL13AR6R8M6C01B0
PTGL16AR5R6M6C01B0
-
PTGL05AR550H4P51A0
PTGL04AS100K2B51B0
PTGL04AS100K2N51B0
PTGL05AS3R9K2B51B0
PTGL07AS2R7K2B51B0
PTGL07AS1R8K2B51B0
PTGL09AS1R2K2B51B0
PTGL12AS0R8K2B51B0
PTGL04AS100K3B51B0
PTGL05AS6R8K3B51B0
PTGL07AS3R3K3B51B0
PTGL09AS2R2K3B51B0
PTGL12AS1R2K3B51B0
PTGL04AS220K4B51B0
PTGL04AS220K4N51B0
PTGL05AS100K4B51B0
PTGL07AS5R6K4B51B0
PTGL07AS5R6K4N51B0
PTGL09AS3R3K4B51B0
PTGL12AS2R2K4B51B0
PTGL04AS560K6B51B0
PTGL05AS270K6B51B0
PTGL07AS150K6B51B0
PTGL09AS120K6B51B0
PTGL09AS7R6K6B51B0
PTGL12AS4R7K6B51B0
PTGL05AR1R0M1B51B0
PTGL06AR0R8M1B51B0
PTGL07ARR47M1B51B0
PTGL09ARR33M1B51B0
PTGL10ARR27M1B51B0
PTGL12AR0R2M1B51B0
PTGL14ARR15M1B51B0
PTGL07BD100N2B51B0
PTGL07BD6R8N2B51B0
PTGL09BD4R7N2B51B0
PTGL09BD3R3N2B51B0
PTGL09BD2R2N2B51B0
PTGL04AR130H2B51B0
PTGL07AR4R6H2B51B0
PTGL09AR1R8H2B51B0
PTGL12AR1R2H2B51B0
PTGL13AR0R8H2B71B0
PTGL07BD470N3B51B0
PTGL07BD330N3B51B0
PTGL07BD220N3B51B0
PTGL07BD150N3B51B0
PTGL07AR220M3P51B0
PTGL07AR8R2M3P51B0
PTGL09AR150M3B51B0
PTGL10AR3R9M3P51B0
PTGL09AR4R7M3B51B0
PTGL10AR3R9M3B51B0
PTGL14AR3R3M3B71B0
PTGL04AS100K2B51A0
PTGL04AS100K2N51A0
PTGL05AS3R9K2B51A0
PTGL07AS2R7K2B51A0
PTGL07AS1R8K2B51A0
PTGL09AS1R2K2B51A0
PTGL12AS0R8K2B51A0
PTGL04AS100K3B51A0
PTGL05AS6R8K3B51A0
PTGL07AS3R3K3B51A0
PTGL09AS2R2K3B51A0
PTGL12AS1R2K3B51A0
PTGL04AS220K4B51A0
PTGL04AS220K4N51A0
PTGL05AS100K4B51A0
PTGL07AS5R6K4B51A0
PTGL07AS5R6K4N51A0
PTGL09AS3R3K4B51A0
PTGL12AS2R2K4B51A0
PTGL04AS560K6B51A0
PTGL05AS270K6B51A0
PTGL07AS150K6B51A0
PTGL09AS120K6B51A0
PTGL09AS7R6K6B51A0
PTGL12AS4R7K6B51A0
PTGL05AR1R0M1B51A0
PTGL06AR0R8M1B51A0
PTGL07ARR47M1B51A0
PTGL09ARR33M1B51A0
PTGL10ARR27M1B51A0
PTGL12AR0R2M1B51A0
-
PTGL07AR250H4B51A0
1500
500
80V Series
PTGL09AR9R4H4B51A0
Narrow
Current Band
30V series
500
-
-
-
1500
1500
1500
300
500
300
-
PTGL05AR181M7P52A0
1500
PTGL07AR750M7B52A0
300
500
300
PTGL09AR470M6B52A0
1000
PTGL09AR220M6B52A0
Narrow
Current Band
51V series
-
-
-
-
-
-
-
-
-
-
-
-
125V Series
250
150
-
-
-
100
-
-
500
300
Narrow
Current Band
60V series
500
-
-
140V Series
250V Series
-
250
-
300
500
200
-
150
PTGL07BB220N0B52A0
-
-
-
Narrow
Current Band
140V series
-
PTGL09AR390N0B52A0
1000
1500
2000
-
PTGL10BB120N0P52A0
PTGL05AR151H8P52B0
PTGL05AR181M9N51B0
PTGL05AR121M9N51B0
PTGL07AR820M9A51B0
PTGL07AR700H8B52B0
PTGL07AR650H8B52B0
PTGL07AR450H8B52B0
PTGL07AR560M9A51B0
PTGL09AR390M9C61B0
PTGL09AR250H8B52B0
PTGL12AR270M9C01B0
PTGL12AR150H8B72B0
PTGL14AR180M9C01B0
PTGL13AR100H8B72B0
PTGL18AR6R0H8B72B0
PTGL05AR151H8P52A0
1000
-
-
300
500
500
-
-
-
-
PTGL07AR700H8B52A0
1000
PTGL07AR650H8B52A0
1000
16V Series
PTGL07AR450H8B52A0
1000
300
200
-
-
265V Series
300
500
-
-
-
PTGL09AR250H8B52A0
1000
PTGL07BD100N2B51A0
PTGL07BD6R8N2B51A0
PTGL09BD4R7N2B51A0
PTGL09BD3R3N2B51A0
PTGL09BD2R2N2B51A0
PTGL04AR130H2B51A0
PTGL07AR4R6H2B51A0
PTGL09AR1R8H2B51A0
-
-
-
-
-
-
-
-
-
-
-
24V Series
1500
150
100
500
300
1500
c
Minimum Order Quantity (for Inrush Current Suppression)
30V Series
32V Series
PTGL07AS121M0N51B0
PTGL07AS181M0N51B0
PTGL07AS201M0N51B0
PTGL14AS470H0B02BZ
PTGL16AS330H0B02BZ
PTGL16AS470H0B02BZ
PTGL16AS680H0B02BZ
PTGL16AS101H0B02BZ
PTGL20AS330H0D02BZ
PTGL20AS470H0D02BZ
PTGL07AS121M0N51A0
1000
500
500
500
150
150
150
150
150
100
100
-
-
Less than 100μF
Series
PTGL07AS181M0N51A0
1000
-
PTGL07AS201M0N51A0
1000
PTGL07BD470N3B51A0
PTGL07BD330N3B51A0
PTGL07BD220N3B51A0
PTGL07BD150N3B51A0
PTGL07AR220M3P51A0
PTGL07AR8R2M3P51A0
PTGL09AR150M3B51A0
PTGL10AR3R9M3P51A0
PTGL09AR4R7M3B51A0
PTGL10AR3R9M3B51A0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
500
1500
100μF or more
Series
500
300
1500
56V Series
c Minimum Order Quantity (for Overheat Sensing)
-
PTFL Series
-
-
400
PTF Series
-
-
PTFM Series
200
Continued on the following page.
98
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Lead Type PTGL/PTF Series Package
Continued from the preceding page.
Narrow Current Band 30 - 140V Series / 16 - 80V Series / Inrush Current Suppression Taping Dimensions
c
ΔS
P2
P
Δh1
Δh2
D
T
P1
F
d
P0
Item
Pitch of Component
Code
P
Dimensions (mm)
12.7
Note
Tolerance is determined by ΔS.
Pitch of Sprocket Hole
P0
F
12.7 0.ꢀ
+0.8
Lead Spacing
5.0
–0.ꢀ
Length from Hole Center to Lead
Length from Hole Center to Component Center
Body Diameter
P1
P2
D
ꢀ.85 0.8
6.ꢀ5 1.ꢀ
Deviation in the feeding direction
Please see in Ratings
Please see in Ratings
1.5
Body Thickness
T
Deviation along Tape, Left or Right Defect
Carrier Tape Width
ΔS
W
W1
H0
H2
I
Including the inclination caused by lead bending
Deviation of tape width
18.0 0.5
+0.5
Position of Sprocket Hole
9.0
–0.75
16.0 1.0
6.0 max.
Lead Distance between Reference and
Bottom Planes
Protrusion Length
+0.5 to –1.0
4.0 0.2
Diameter of Sprocket Hole
Lead Diameter
D0
d
Please see in Ratings
0.6 0.ꢀ
Total Tape Thickness
t1
Total Thickness of Tape and Lead Wire
Deviation across Tape
t2
2.0 max.
Δh1, Δh2
1.5 max.
+0
11.0
–2.0
Portion to cut in Case of Defect
Hold down Tape Width
Hold down Tape Position
Coating Extension on Lead
L
W0
W2
e
11.0 min.
4.0 max.
Up to the center of crimp
Continued on the following page.
99
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R90E.pdf
Sep.24,2012
Lead Type PTGL/PTF Series Package
Continued from the preceding page.
125/250/265V Series Taping Dimensions
c
ΔS
P2
P
Δh1
Δh2
T
D
P1
F
d
P0
Item
Pitch of Component
Code
P
Dimensions (mm)
12.7
Note
Tolerance is determined by ΔS.
Pitch of Sprocket Hole
Lead Spacing
P0
F
12.7 0.ꢀ
+0.8
5.0
–0.ꢀ
Length from Hole Center to Lead
Length from Hole Center to Component Center
Body Diameter
P1
P2
D
ꢀ.85 0.8
6.ꢀ5 1.ꢀ
Deviation in the feeding direction
Please see Ratings
Please see Ratings
1.5
Body Thickness
T
Deviation along Tape, Left or Right
Carrier Tape Width
ΔS
W
W1
H0
H2
I
Including the inclination caused by lead bending.
Deviation of tape width.
18.0 0.5
+0.5
Position of Sprocket Hole
9.0
–0.75
16.0 1.0
6.0 max.
W0.5 to Y1.0
4.0 0.2
Lead Distance between Reference and
Bottom Planes
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
D0
d
0.6 0.05
0.6 0.ꢀ
Total Tape Thickness
t1
Total Thickness of Tape and Lead Wire
t2
2.0 max.
1.5 max.
Deviation across Tape
Δh1, Δh2
+0
11.0
–2.0
Portion to cut in Case of Defect
Hold down Tape Width
L
W0
W2
e
11.0 min.
4.0 max.
Hold down Tape Position
Coating Extension on Lead
Up to the center of crimp
100
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
R90E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.24,2012
相关型号:
PTGL07AS5R6K4B51B0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07AS5R6K4N51A0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07AS5R6K4N51B0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BB220N0B52A0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD100N2B51A0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD100N2B51B0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD150N3B51A0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD150N3B51B0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD220N3B51A0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD220N3B51B0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD330N3B51A0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
PTGL07BD330N3B51B0
PTC Thermistors for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type
MURATA
©2020 ICPDF网 联系我们和版权申明