PV22L501A01B00 [MURATA]
RESISTOR, TRIMMER, CERMET, 22 TURN(S), 1W, 500ohm;型号: | PV22L501A01B00 |
厂家: | muRata |
描述: | RESISTOR, TRIMMER, CERMET, 22 TURN(S), 1W, 500ohm 电阻器 |
文件: | 总18页 (文件大小:348K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
Trimmer Potentiometers
Lead Sealed Multi-turn Type PV12/PV37/PV23/PV22/PV36 Series
PV12 Series
0.6±0.1
7.0±1.0
6.6±0.1
0.7±0.1 Depth
■ Features
1. Cermet with 4-turns construction in 7.6mm round.
2. Unique planetary drive enables precise wiper
setting.
0.5
#2
3. Clutch mechanism prevents excessive wiper rotation.
4. Compatible with ultrasonic cleaning.
#2
#3
#1
#1
#3
■ Applications
1. Measuring instruments 2. Facsimile machines
CLOCKWISE
90°±6°
PV12H
PV12P
PV12T
in mm
Tolerance : ±0.3
3. CPUs
4. PPCs
(
)
5. Printers
6. Sensors
0.6±0.1
0.7±0.1 Depth
7.0±1.0
6.6±0.1
0.5
2.5 2.5
#2
#2
#1
#3
#3
#1
CLOCKWISE
in mm
Tolerance : ±0.3
(
)
7.7±0.3
0.6±0.1
0.7±0.1 Depth
7.7±0.3
0.6±0.1
0.7±0.1 Depth
3−0.5±0.1 Dia.
3−0.5±0.1 Dia.
#1
#2 #3
7.6±0.3
#1
#2 #3
7.6±0.3
6.3±0.3
6.3±0.3
#2
#2
#1
#3
#1
CLOCKWISE
#3
CLOCKWISE
PV12S
in mm
Tolerance : ±0.3
in mm
)
(
)
(
2.5
2.5
2.5
2.5
Tolerance : ±0.3
8
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
PV12p100A01
Soldering Method
Total Resistance Value
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
4
4
4
4
4
4
4
4
4
4
10ohm ±10%
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
PV12p200A01
PV12p500A01
PV12p101A01
PV12p201A01
PV12p501A01
PV12p102A01
PV12p202A01
PV12p502A01
PV12p103A01
Continued on the following page.
51
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
Continued from the preceding page.
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
PV12p203A01
Soldering Method
Total Resistance Value
(W)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
4
4
4
4
4
4
4
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
±100
±100
±100
±100
±100
±100
±100
PV12p503A01
PV12p104A01
PV12p204A01
PV12p504A01
PV12p105A01
PV12p205A01
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (H, P, T and S).
The order quantity should be an integral multiple of the "Minimum Quantity" .
■ Construction
Shaft
Case
"O"-Ring
Gear
Rotor
Insert
Wiper
Ceramic Resistive
Element
Alumina Substrate
Terminal
■ Mounting Holes
PV12H
PV12P/PV12S
(2)
(3)
(1)
(2)
2.5
2.5
(1)
(3)
Tolerance:±0.1
Tolerance:±0.1
in mm
in mm
8
PV12T
2.5
2.5
(1)
(3)
(2)
Tolerance:±0.1
in mm
52
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±2%
∆TR ±3%
∆V.S.S. ±1.5%
∆TR ±3%
∆V.S.S. ±1.5%
Shock (100G)
Temperature Load Life
Low Tamperature Exposure
High Tamperature Exposure
Rotational Life (200 cycles)
∆TR
±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
53
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
PV37 Series
0.6
1.0
Marking
1.2
■ Features
1. High resolution, 12-turns cermet.
2. Listed on the QPL for style RJ26 per MIL-R-22097.
3. Small size. (6.35x6.35x4.3mm)
3−0.4±0.1 Dia.
4. Compatible with ultrasonic cleaning.
5. Clutch mechanism prevents excessive wiper rotation.
#1 #2
6.4
#3
#2
#1
CLOCKWISE
#3
■ Applications
1. Measuring instruments 2. Facsimile machines
PV37P
PV37X
PV37Z
in mm
Tolerance : ±0.3
3. CPUs
4. PPCs
2.5 2.5
(
)
5. Printers
6. Sensors
6.4
1.1
6.4
1.2
0.6
1.0
1.8±0.2 Dia.
0.6±0.2
Marking
1.1
Marking
3−0.4±0.1 Dia.
#3
3−0.4±0.1 Dia.
#2
#1
2.5 2.5
#3
#2
#1
#2
2.5 2.5
#2
#1
CLOCKWISE
#3
#1
CLOCKWISE
#3
PV37W
in mm
in mm
Tolerance : ±0.3
(
)
(
)
Tolerance : ±0.3
1.1
0.6
1.0
6.4
1.2
6.4
Marking
1.8±0.2 Dia.
0.6±0.2
1.1
Marking
3−0.4±0.1 Dia.
3−0.4±0.1 Dia.
#3 #2
2.5 2.5
#1
#3 #2 #1
2.5 2.5
#2
#2
#1
CLOCKWISE
#3
#1
#3
PV37Y
CLOCKWISE
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
(
)
(
)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
PV37p100A01
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10ohm ±10%
20ohm ±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
PV37p200A01
PV37p500A01
PV37p101A01
PV37p201A01
PV37p501A01
PV37p102A01
PV37p202A01
PV37p502A01
PV37p103A01
PV37p203A01
PV37p253A01
PV37p503A01
PV37p104A01
PV37p204A01
PV37p254A01
8
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
Continued on the following page.
54
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
Continued from the preceding page.
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
PV37p504A01
Soldering Method
Total Resistance Value
(W)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
10ohm ±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
PV37p105A01
PV37p205A01
PV37p100A31
PV37p200A31
PV37p500A31
PV37p101A31
PV37p201A31
PV37p501A31
PV37p102A31
PV37p202A31
PV37p502A31
PV37p103A31
PV37p203A31
PV37p253A31
PV37p503A31
PV37p104A31
PV37p204A31
PV37p254A31
PV37p504A31
PV37p105A31
PV37p205A31
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).
The order quantity should be an integral multiple of the "Minimum Quantity" .
The last three digits express the individual specification codes. A01 for standard type and A31 for radial taping type (PV36W/PV36X series only).
■ Construction
Gear
Case
Adjustment Screw
Terminal
Wiper and
Ratchet Arm
Cermet Resistive
Element
Alumina Substrate
8
■ Mounting Holes
PV37P
PV37W/PV37X
2.5
2.5
2.5
2.5
(3)
(1)
(1)
(3)
(2)
(2)
Tolerance:±0.1
in mm
Tolerance ±0.1
in mm
Continued on the following page.
55
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
Continued from the preceding page.
■ Mounting Holes
PV37Y/PV37Z
(3)
(2)
(1)
2.5
2.5
Tolerance:±0.1
in mm
■ Characteristics
∆TR
±1%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Temperature Load Life
Low Tamperature Exposure
High Tamperature Exposure
Rotational Life (200 cycles)
∆TR
±2%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
56
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
PV23 Series
19.1
1.5
0.8
■ Features
1. Recommended for applications requiring side
4.6
adjustment
2. Rectangular parallelepiped, 15-turns, space saving
design. (4.6x6.4x19.1mm)
3−0.5±0.1 Dia.
#1
#2
#3
3. Compatible with ultrasonic cleaning.
4. Clutch mechanism prevents excessive wiper rotation.
#2
3.3
12.7
#1
#3
5.1
CLOCKWISE
■ Applications
PV23P
in mm
Tolerance : ±0.3
1. Measuring instruments 2. Facsimile machines
(
)
3. CPUs
4. PPCs
5. Printers
6. Sensors
19.1
1.5
0.8
4.6
3−0.5±0.1 Dia.
#1
#2
#3
#2
17.8
0.6
#1
CLOCKWISE
#3
7.6
PV23Y
in mm
Tolerance : ±0.3
(
)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
PV23p100A01
PV23p200A01
PV23p500A01
PV23p101A01
PV23p201A01
PV23p501A01
PV23p102A01
PV23p202A01
PV23p502A01
PV23p103A01
PV23p203A01
PV23p503A01
PV23p104A01
PV23p204A01
PV23p504A01
PV23p105A01
PV23p205A01
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
10ohm ±10%
20ohm ±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
8
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P and Y).
The order quantity should be an integral multiple of the "Minimum Quantity" .
57
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
■ Construction
Post
Adjustment
Screw
Case
Terminal
Alumina Substrate
Wiper
Cermet
Resistive
Element
■ Mounting Holes
PV23P
PV23Y
12.7
17.8
7.6
5.1
(3)
(1)
(1)
(3)
(2)
(2)
Tolerance:±0.1
Tolerance:±0.1
in mm
in mm
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Shock (50G)
Temperature Load Life
Low Tamperature Exposure
High Tamperature Exposure
Rotational Life (200 cycles)
8
∆TR
±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
58
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
PV22 Series
31.8
3.2±0.2
25.4±0.2
■ Features
1. Recommended for applications requiring side
152 min.
5.0
1.7
adjustment.
0.8±0.2
2. High power rating (1W at 70deg. C), 22-turns.
3. Compatible with ultrasonic cleaning.
4. Clutch mechanism prevents excessive wiper rotation.
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
#2
#1(Yellow)
#2
■ Applications
#1
CLOCKWISE
#3
(Red)
1. Measuring instruments 2. Facsimile machines
PV22L
#3(Green)
Insulated standard wire
in mm
Tolerance : ±0.3
3. CPUs
4. PPCs
(
)
5. Printers
6. Sensors
31.8
31.8
3.2±0.2
25.4±0.2
3.2±0.2
25.4±0.2
5.0
1.7
5.0
1.7
0.8±0.2
3−0.7±0.1 Dia.
0.8±0.2
3−0.7±0.1 Dia.
#2 #1
#3
#1
#2
#3
Mounting holes 2−2.5±0.2 Dia.
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
6.6
#2
6.0
6.0
6.6
#2
#1
#3
#1
#3
CLOCKWISE
CLOCKWISE
PV22S
PV22Y
17.8
22.9
7.6
in mm
in mm
17.8
(
)
(
)
Tolerance : ±0.3
Tolerance : ±0.3
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
PV22p100A01
Soldering Method
Total Resistance Value
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
10ohm ±10%
20ohm ±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
PV22p200A01
PV22p500A01
PV22p101A01
PV22p201A01
PV22p501A01
PV22p102A01
PV22p202A01
PV22p502A01
PV22p103A01
PV22p203A01
PV22p503A01
PV22p104A01
PV22p204A01
PV22p504A01
PV22p105A01
PV22p205A01
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
8
Operating Temperature Range: -55 to 150 °C
The blank column is filled with the code of adjustment direction and lead type (L, S and Y).
The order quantity should be an integral multiple of the "Minimum Quantity" .
59
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
■ Construction
■ Mounting Holes
PV22S
Adjustment
Screw
Post
17.8
(2)
(1)
(3)
Alumina
Substrate
22.9
Case
Cermet
Resistive
Element
Wiper
Terminal
Tolerance:±0.1
in mm
PV22Y
17.8
7.6
(3)
(1)
(2)
Tolerance:±0.1
in mm
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Shock (50G)
Temperature Load Life
Low Tamperature Exposure
High Tamperature Exposure
Rotational Life (200 cycles)
8
∆TR
±2%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
60
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
PV36 Series
1.3
0.7
Marking
1.3
■ Features
1. 25-turns, cermet, square, 9.5mm package.
2. 5 terminal styles, top and side adjustment.
3. Compatible with ultrasonic cleaning.
4. Clutch mechanism presents excessive wiper rotation.
3-0.5±0.1 Dia.
#1 #2 #3
9.6
■ Applications
1. Measuring instruments 2. Facsimile machines
#2 (Wiper)
#3
#1
3. CPUs
4. PPCs
Clockwise
PV36P
PV36X
PV36Z
(in mm)
(Tolerance : ±0.3)
5. Printers
6. Sensors
2.5 2.5
1.2
9.6
9.6
1.3
2.0 Dia.
0.6
0.7
1.3
Marking
1.2
Marking
3-0.5±0.1 Dia.
3-0.5±0.1 Dia.
#3 #2 #1
2.5 2.5
#3 #2 #1
2.5 2.5
#2 (Wiper)
#3
#2 (Wiper)
#3
#1
#1
Clockwise
PV36W
Clockwise
(in mm)
(Tolerance : ±0.3)
(in mm)
(Tolerance : ±0.3)
9.6
1.2
9.6
1.3
2.0 Dia.
0.6
0.7
1.3
Marking
1.2
Marking
3-0.5±0.1 Dia.
3-0.5±0.1 Dia.
#3 #2 #1
#3 #2 #1
2.5 2.5
#2 (Wiper)
#2 (Wiper)
#1
#3
#1
#3
Clockwise
(in mm)
PV36Y
Clockwise
(in mm)
2.5 2.5
(Tolerance : ±0.3)
(Tolerance : ±0.3)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
PV36p100A01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10ohm ±10%
20ohm ±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
PV36p200A01
PV36p500A01
PV36p101A01
PV36p201A01
PV36p501A01
PV36p102A01
PV36p202A01
PV36p502A01
PV36p103A01
PV36p203A01
PV36p253A01
PV36p503A01
PV36p104A01
PV36p204A01
PV36p254A01
8
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
Continued on the following page.
61
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
Continued from the preceding page.
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
PV36p504A01
Soldering Method
Total Resistance Value
(W)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
10ohm ±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
PV36p105A01
PV36p205A01
PV36p100A31
PV36p200A31
PV36p500A31
PV36p101A31
PV36p201A31
PV36p501A31
PV36p102A31
PV36p202A31
PV36p502A31
PV36p103A31
PV36p203A31
PV36p253A31
PV36p503A31
PV36p104A31
PV36p204A31
PV36p254A31
PV36p504A31
PV36p105A31
PV36p205A31
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).
The order quantity should be an integral multiple of the "Minimum Quantity" .
The last three digits express the individual specification codes. A01 for standard type and A31 for radial taping type (PV37Y/PV37Z series only).
■ Construction
Adjustment Screw
Terminal
Case
Wiper and Ratchet Arm
Cermet Resistive Element
Gear
Alumina Substrate
8
■ Mounting Holes
PV36P
PV36W
2.5
2.5
(3)
(2)
(1)
(1)
(3)
(2)
2.5
2.5
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
Continued on the following page.
62
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
Continued from the preceding page.
■ Mounting Holes
PV36X
PV36Y
2.5
2.5
(3)
(2)
(1)
(3)
(1)
(2)
2.5
2.5
Tolerance ±0.1
in mm
Tolerance:±0.1
in mm
PV36Z
2.5
2.5
(3)
(1)
(2)
Tolerance ±0.1
in mm
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
Temperature Load Life
Low Tamperature Exposure
High Tamperature Exposure
Rotational Life (200 cycles)
8
∆TR
±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
63
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
PV12/PV37/PV23/PV22/PV36 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store that the temperature is -10 to +40deg. C and
the relative humidity is 30-85%RH.
using.
(1) Corrosive gaseous atmosphere.
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxie gas, etc.)
(2) In liquid.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere.
6. The trimmer potentiometer should not be used under
the following environmental conditions:
(4) Direct sunlight.
If you use the trimmer potentiometer in an
environment other these listed below, please
consult with Murata factory representative prior to
(5) Static voltage nor electric/magnetic fields.
(6) Direct sea breeze.
(7) Other variations of the above.
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depend on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P•R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
■ Notice (Soldering and Mounting)
1. Soldering
trimmer potentimeter may be damaged by
mechanical stress.
(1) Standard soldering condition
(a) Flow soldering :
(2) Do not apply excessive force (preferable 9.8N
(Ref.; 1kgf) max.), when the trimmer
potentiometer is mounted to the PCB.
3. Cleaning
>Pre-haeting temp. 80-100deg. C
>Soldering temp.
>Soldering time
260deg. C max.
3sec. max.
(b) Soldering iron :
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvent for cleaning. If you use any
other types of solvents, please consult with
Murata factory representative prior to using.
(2) The total cleaning time by cold dipping, vaper
and ultrasonic washing (conditions as below)
method shall be less than 3 minutes.
(3) For ultra-sonic cleaning, the available
condition is as follows.
>Temperature of tip 300deg. C max.
>Soldering time
>Wattage of iron
3sec. max.
40W max.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e. g.,
excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
>Power
: 600W (67liter) max.
: 28kHz
8
>Frequency
(2) To minimize mechanical stress when adjusting,
the trimmer potentiometer shall be mounted onto
PCB without gap.
>Temperature : Ambient temperature
Due to the ultra-sonic cleaning equipment
peculiar self resonance point and the cleaning
compatibility usually depends on the jig
construction and/or the cleaning condition such
as the depth of immersion, please check the
cleaning equipment to determine the suitable
conditions.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
2. Mounting
(1) Use PCB hole to meet the pin of the trimmer
potentiometer. If the trimmer potentiometer
instools into insufficient PCB hole, the
If the trimmer potentiometer is cleaned by
other conditions, the trimmer potentiometer may
be damaged.
64
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
PV12/PV37/PV23/PV22/PV36 Series Notice
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.We recommend the below screwdrivers.
* Recommended screwdriver for manual adjustment
VESSEL MFG. : NO. 9000-1.8x30
applied, the trimmer potentiometer may not
function.
3. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
(Murata P/N : KMDR110)
We can supply above screwdrivers.
If you place order, please nominate Murata P/N.
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
and stress after mounted onto PCB to prevent
contact intermittence. If excessive force is
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401series").
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata connot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
8
65
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
SMDSealedType/LeadSealedType Specifications and Test Methods
The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification
for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts).
No.
Item
Test Methods
Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned
against a stop. The positioning of the contact arm and terminal shall be the same for subsequent total resistance
measurements on the same device. Use the test voltage specified in Table-1 for total resistance measurements.
This voltage shall be used for all subsequent total resistance measurements.
Total resistance,
Nominal (ohm)
Maximum Test
Voltage (V)
1
Total Resistance
10VRV100
100FRV1k
1kFRV10k
10kFRV100k
100kFR
1.0
3.0
10.0
30.0
100.0
Table-1 Total resistance test voltage
Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance
between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-
wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-
minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not
exceeded.
2
Residual Resistance
Contact resistance variation shall be measured with the measuring circuit shown in Figure-1, or its equivalent. The
adjustment rotor (screw) shall be rotated in both directions through 90% of the actual effective-electrical rotational
angle(number of turns) for a total of 6 cycles. Only the last 3 cycles shall count in determining whether or not a con-
tact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points
where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the
adjustment rotor (screw) shall be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum to
2 minutes maximum. The test current used shall follow the value given in Table-2 unless otherwise limited by power
rating.
Standard total resistance
Oscilloscope
Test current
Rx
#3
#1
R (ohm)
Contact Resistance
Variation
3
RV100
20mA
10mA
4mA
2mA
1mA
200µA
100µA
50µA
30µA
#
2
Constant Current Source not to
Exceed Rating of Unit Being
100FRF500
500VRF1k
1kVRF2k
2kVRF50k
50kVRF200k
200kVRF1M
1MVRF2M
2MVR
Proofreaded
Resistance
AC
Amplifier
Rx : Trimmer Potentiometer
Oscilloscope bandwidth :100Hz to 50kHz
Figure-1 CRV measuring circuit
Table-2 Test current for CRV
The trimmer potentiometer shall be subjected to the following each temperature (see Table-3) for 30-45 minutes.
Temperature coefficient of resistance shall be applied to the following formula.
R2 – R1
R1 (T2 – T1)
TCR=
Z 106 (ppm/°C)
T1 : Reference temperature in degrees celsius
T2 : Test temperature in degrees celsius
R1 : Resistance at reference temperature ohm
R2 : Resistance at test temperature in ohm
Temperature Coefficient of
Resistance
4
Sequence
Temperature(°C)
1*
2
3
4*
5
6
Min. operating
temperature
Max. operating
temperature
+25
-15
+25
+65
Note) * : Reference temperature
Table-3 Test temperatures
The wiper shall be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An
adequate DC test potential shall be applied between the terminal #1 and the terminal #3. The voltage between the
terminal #1 and the terminal #3, and the voltage between the terminal #1 and the terminal #2, shall be measured
and applied to the following formula.
E
e'
E
e
E
9
Voltage Setting
Stability
Voltage setting stability=
e : Before test
–
Z100 (%)
(
)
5
#1
#3
(The voltage between the terminal #1 and the terminal #2)
e': After test
#2
e
(The voltage between the terminal #1 and the terminal #2)
E: The voltage between the terminal #1 and the terminal #3
Figure-2
Continued on the following page.
72
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
SMDSealedType/Lead Sealed Type Specifications and Test Methods
Continued from the preceding page.
No.
Item
Test Methods
The trimmer potentiometer shall be subjected to Table-4 temperature for 5 cycles. The trimmer potentiometer shall
be removed from the chamber, and maintained at a temperature of 25±5°C for 1~2 hours.
Sequence
1
2
3
4
+125±3
+25±2 +150±3 +25±2
+60±3
PV-- series
PV22 series
PVF2 series
Temp.
(°C)
-55±3
6
Temperature Cycle
-25±3
30
Time (min.)
5 max.
30
5 max.
Table-4 One cycle of temperature cycle.
1) PVC6, PV12, PV32, PV34 PVM4A---B01series
The trimmer potentiometer shall be placed in a chamber at a temperature of 40±2°C and a humidity of 90~95% with-
out loading for 250±8 hours. The trimmer potentiometer shall be removed from the chamber, and maintained at a
temperature of 25±5°C for 5±1/6 hours.
2) PVF2series
The trimmer potentiometer shall be placed in a chamber at 60±2°C and 90~95% without loading for 1000±12 hours.
The trimmer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for
5±1/6 hours
2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37series
The trimmer potentiometer shall be subjected Figure-3 the programmed humidity environment for 10 cycle. The trim-
mer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/2 hours.
MIL-STD-202 METHOD 106
80-98%RH
80-98%RH
70
65
60
55
50
45
40
35
30
25
20
90-98%RH
90-98%RH
90-98%RH
INITIAL CONDITIONING
IN A DRY OVEN
24 HOURS
RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.
HOWEVER, SPECIMENS SHALL NOT BE SUBJECTED TO
RADIANT HEAT FROM CHAMBER-CONDITIONING
PROCESSES
HUMIDITY
UNCONTROLLED
7
Humidity
END OF FINAL CYCLE
MEASUREMENTS AS
SPECIFIED IN 3.6
+10°C
-2°C
CIRCULATION OF CONDITIONING AIR SHALL
BE AT A MINIMUM CUBIC RATE PER MINUTE
EQUIVALENT TO 5 TIMES THE VOLUME OF
THE CHAMBER
INITIAL MEASUREMENTS
15 AS SPECIFIED IN 3.2
10
5
VOLTAGE APPLIED AS SPECIFIED IN 3.5
0
UNLESS OTHERWISE SPECIFIED
TEMPERATURE TOLERANCE IS,
-5
STEPS 7a AND 7b PERFORMED DURING ANY
5 OF THE FIRST 9 CYCLES. HUMIDITY
UNCONTROLLED DURING STEPS 7a AND 7b
ONLY
-10 ±2°C AT ALL POINTS WITHIN THE
STEP 7b
STEP 7a
CHAMBER EXCEPT THE IMMEDIATE
VICINITY OF THE SPECIMENS AND
THE CHAMBER SURFACES
PRIOR TO FIRST CYCLE
UNLESS OTHERWISE
SPECIFIED
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6
STEP 7
ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Figure-3
1) PV-- series
The trimmer potentiometer shall be vibrated throughout the frequency range at the 20G level. A complete frequency
range, 10Hz to 2000Hz and back, shall be made within 15 minutes for a total of 4 sweeps in each of the three axis
direction for a total of 12 sweeps.
8
9
Vibration
2) PVF2 series
The trimmer potentiometer shall be subjected to vibration at 0.3 inch amplitude. The frequency shall be varied uni-
formly between the approximate limits of 10 Hz and 55Hz. This motion shall be applied for preiod of 2 hours in each
of 3 mutually perpendicular direction (total of 6 hours).
1) PV-- series
The trimmer potentiometer shall be shocked at the 100G (50G for PV22 and PV23series) level and shall be subject-
ed to 4 shocks in each of the three axis direction for a total of 12 shocks.
2) PVM4A---B01series
Shock
The trimmer potentiometer shall be shocked at the 100G level and shall be subjected to 3 shocks in each of the six
axis direction for a total of 18 shocks.
Full rated continuous working voltage not exceeding the maximum rated voltage shall be applied intermittently
between the terminal #1 and the terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total
of 1000±12 hours, at a temperature of 70±2°C (85±2°C for PV01 and PV37series, 50±2°C for PVF2series). The trim-
mer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours.
10 Temperature Road Life
9
The trimmer potentiometer shall be placed in a camber at a temperature of 125±3°C (150±3°C for PV12series)
250±8 hours without loading. The trimmer potentiometer shall be removed from the camber, and maintained at a
temperature of 25±5°C for 1 to 2 hours.
High Temperature Exposure
(Except for PVF2)
11
The trimmer potentiometer shall be placed in a camber at a temperature of -55±3°C for 1 hours without loading. Full
rated continuous working voltage not exceeding the maximum rated voltage shall be applied for 45 minutes. The
trimmer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for approxi-
mately 24 hours.
Low Temperature Exposure
(Except for PVF2 and
PVM4A---B01)
12
Continued on the following page.
73
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
R50E12.pdf 02.9.5
SMDSealedType/LeadSealedType Specifications and Test Methods
Continued from the preceding page.
No.
13
Item
Test Methods
Low Temperature Operation
(Only for PVF2 and
PVM4A---B01)
The trimmer potentiometer shall be placed in a camber at a temperature of -25±3°C (-55±3°C for PVM4A---
B01series) 48±4 hours without loading. The trimmer potentiometer shall be removed from the chamber, and main-
tained at a temperature of 25±5°C for 5±1/6 hours
1)PV-- series
Full rated continuous working voltage not exceeding the maximum rated voltage shall be applied with the circuit
shown in the figure. The adjustment rotor (screw) shall be continuously cycled through not less than 90% of effec-
tive-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 a minutes maxi-
mum for total of 200 cycles.
Resistor 1
Resistor 2
End Terminal
End Terminal
End Terminal
End Terminal
14 Rotational Life
DC supply
Figure-4
2) PVG3, PVG5series
The adjustment rotor (screw) shall be continuously cycled though not less than 90% of effective- electrical rotational
angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50 (100
for PVG5) cycles, without loading.
3) PVF2, PVM4A---B01series
The wiper shall be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per
minute, for 100 cycles continuously.
9
74
相关型号:
©2020 ICPDF网 联系我们和版权申明