PV23P102C01B00 [MURATA]
RESISTOR, TRIMMER, CERMET, 15 TURN(S), 0.75W, 1000ohm;型号: | PV23P102C01B00 |
厂家: | muRata |
描述: | RESISTOR, TRIMMER, CERMET, 15 TURN(S), 0.75W, 1000ohm PC 电阻器 |
文件: | 总22页 (文件大小:379K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series
PV12 Series
0.6±0.1
6.6±0.1
7.0±1.0
0.7±0.1 Depth
■ Features
1. The unique inner gear system recognizes the
position of the center of the shaft of the
potentiometer.
0.5
#2
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
#2
#3
#1
#1
#3
4. Clutch mechanism prevents excessive wiper rotation.
CLOCKWISE
90°±6°
PV12H
PV12P
PV12T
in mm
Tolerance : ±0.3
■ Applications
1. HDTVs
(
)
2. Professional cameras
4. FAX
3. CATV
5. Printers
6. Sensors
0.6±0.1
7.0±1.0
6.6±0.1
0.7±0.1 Depth
7. Switching power supplies
0.5
2.5 2.5
#2
#2
#1
#3
#3
#1
CLOCKWISE
in mm
Tolerance : ±0.3
(
)
7.7±0.3
0.6±0.1
7.7±0.3
0.6±0.1
0.7±0.1 Depth
0.7±0.1 Depth
3−0.5±0.1 Dia.
3−0.5±0.1 Dia.
#1
#2 #3
7.6±0.3
#1
#2 #3
7.6±0.3
6.3±0.3
6.3±0.3
#2
#2
#1
#3
#1
CLOCKWISE
#3
CLOCKWISE
PV12S
in mm
Tolerance : ±0.3
in mm
)
(
)
(
2.5
2.5
2.5
2.5
Tolerance : ±0.3
8
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV12p100A01
PV12p200A01
PV12p500A01
PV12p101A01
PV12p201A01
PV12p501A01
PV12p102A01
PV12p202A01
PV12p502A01
PV12p103A01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
4
4
4
4
4
4
4
4
4
4
10ohm ±10%
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
Continued on the following page.
54
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV12p203A01
PV12p503A01
PV12p104A01
PV12p204A01
PV12p504A01
PV12p105A01
PV12p205A01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
4
4
4
4
4
4
4
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (H, P, T and S).
The order quantity should be an integral multiple of the "Minimum Quantity".
■ Construction
Shaft
Case
"O"-Ring
Gear
Rotor
Insert
Wiper
Ceramic Resistive
Element
Alumina Substrate
Terminal
■ Mounting Holes
PV12H
PV12P/PV12S
(2)
(3)
(1)
(2)
2.5
2.5
(1)
(3)
Tolerance:±0.1
Tolerance:±0.1
in mm
in mm
8
PV12T
2.5
2.5
(1)
(3)
(2)
Tolerance:±0.1
in mm
55
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±2%
∆TR ±3%
∆V.S.S. ±1.5%
∆TR ±3%
∆V.S.S. ±1.5%
Shock (100G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
56
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV37 Series
0.6
1.0
Marking
1.2
■ Features
1. Smaller volume (about one-third) than 25-turns
potentiometer
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. 5 standard terminal styles
3−0.4±0.1 Dia.
#1 #2
6.4
#3
#2
#1
CLOCKWISE
#3
6. Both Top and side adjustment directions
7. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
PV37P
PV37W
PV37X
PV37Z
in mm
Tolerance : ±0.3
2.5 2.5
(
)
1.1
6.4
1.8±0.2 Dia.
0.6±0.2
1.2
■ Applications
1. Measuring instruments 2. OA equipment
Marking
3. Medical equipment
4. Power supply
5. Base station for cellular phone
3−0.4±0.1 Dia.
#3
#2
#1
#2
2.5 2.5
#1
CLOCKWISE
#3
in mm
Tolerance : ±0.3
(
)
6.4
0.6
1.0
Marking
1.1
3−0.4±0.1 Dia.
#3
#2
#1
2.5 2.5
#2
#1
CLOCKWISE
#3
in mm
Tolerance : ±0.3
(
)
1.1
0.6
1.0
6.4
6.4
Marking
1.8±0.2 Dia.
0.6±0.2
1.1
1.2
Marking
8
3−0.4±0.1 Dia.
3−0.4±0.1 Dia.
#3 #2
2.5 2.5
#1
#3 #2 #1
2.5 2.5
#2
#2
#1
CLOCKWISE
#3
#1
#3
PV37Y
CLOCKWISE
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
(
)
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV37p100C01
PV37p200C01
PV37p500C01
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
10ohm ±10%
20ohm ±10%
50ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
Continued on the following page.
57
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV37p101C01
PV37p201C01
PV37p501C01
PV37p102C01
PV37p202C01
PV37p502C01
PV37p103C01
PV37p203C01
PV37p253C01
PV37p503C01
PV37p104C01
PV37p204C01
PV37p254C01
PV37p504C01
PV37p105C01
PV37p205C01
PV37p100C31
PV37p200C31
PV37p500C31
PV37p101C31
PV37p201C31
PV37p501C31
PV37p102C31
PV37p202C31
PV37p502C31
PV37p103C31
PV37p203C31
PV37p253C31
PV37p503C31
PV37p104C31
PV37p204C31
PV37p254C31
PV37p504C31
PV37p105C31
PV37p205C31
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
10ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).
The order quantity should be an integral multiple of the "Minimum Quantity".
The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV37Y/PV37Z series only).
8
58
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV37p100A01
PV37p200A01
PV37p500A01
PV37p101A01
PV37p201A01
PV37p501A01
PV37p102A01
PV37p202A01
PV37p502A01
PV37p103A01
PV37p203A01
PV37p253A01
PV37p503A01
PV37p104A01
PV37p204A01
PV37p254A01
PV37p504A01
PV37p105A01
PV37p205A01
PV37p100A31
PV37p200A31
PV37p500A31
PV37p101A31
PV37p201A31
PV37p501A31
PV37p102A31
PV37p202A31
PV37p502A31
PV37p103A31
PV37p203A31
PV37p253A31
PV37p503A31
PV37p104A31
PV37p204A31
PV37p254A31
PV37p504A31
PV37p105A31
PV37p205A31
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Gear
Case
8
Adjustment Screw
Terminal
Wiper
Cermet Resistive
Element
Alumina Substrate
59
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Mounting Holes
PV37P
PV37W/PV37X
2.5
2.5
2.5
2.5
(3)
(1)
(1)
(3)
(2)
(2)
Tolerance:±0.1
Tolerance ±0.1
in mm
in mm
PV37Y/PV37Z
(3)
(2)
(1)
2.5
2.5
Tolerance:±0.1
in mm
■ Characteristics
∆TR
±1%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR RV100ohm ... ±3%
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
8
RG100ohm ... ±2%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR
R
: Insulation Resistance
: Standard Total Resistance
60
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV23 Series
19.1
1.5
0.8
■ Features
4.6
1. Small size (4.6x6.4x19.1mm) and high power rating
(0.75W at 70deg.C)
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
3−0.5±0.1 Dia.
#1
#2
#3
#2
3.3
12.7
#1
#3
5.1
CLOCKWISE
PV23P
in mm
(
)
Tolerance : ±0.3
■ Applications
19.1
1. Measuring instruments 2. FAX
1.5
0.8
3. Copier
4. Printers
4.6
5. Sensors
3−0.5±0.1 Dia.
#1
#2
#3
#2
17.8
0.6
#1
CLOCKWISE
#3
7.6
PV23Y
in mm
Tolerance : ±0.3
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV23p100C01
PV23p200C01
PV23p500C01
PV23p101C01
PV23p201C01
PV23p501C01
PV23p102C01
PV23p202C01
PV23p502C01
PV23p103C01
PV23p203C01
PV23p503C01
PV23p104C01
PV23p204C01
PV23p504C01
PV23p105C01
PV23p205C01
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
10ohm ±10%
20ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
8
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P and Y).
The order quantity should be an integral multiple of the "Minimum Quantity".
61
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV23p100A01
PV23p200A01
PV23p500A01
PV23p101A01
PV23p201A01
PV23p501A01
PV23p102A01
PV23p202A01
PV23p502A01
PV23p103A01
PV23p203A01
PV23p503A01
PV23p104A01
PV23p204A01
PV23p504A01
PV23p105A01
PV23p205A01
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Post
Adjustment
Screw
Case
Terminal
Alumina Substrate
Wiper
Cermet
Resistive
Element
■ Mounting Holes
PV23P
PV23Y
12.7
17.8
7.6
5.1
(3)
(1)
(1)
(3)
(2)
(2)
8
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
62
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Shock (50G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
63
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV22 Series
31.8
3.2±0.2
25.4±0.2
■ Features
152 min.
5.0
1.7
1. High power rating (1W at 70 deg.C)
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
0.8±0.2
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
#2
#1(Yellow)
#2
#1
CLOCKWISE
#3
(Red)
PV22L
PV22S
PV22Y
#3(Green)
Insulated standard wire
in mm
Tolerance : ±0.3
(
)
■ Applications
1. Measuring instruments 2. FAX
31.8
3. Copier
4. Printers
3.2±0.2
25.4±0.2
5. Sensors
5.0
1.7
0.8±0.2
3−0.7±0.1 Dia.
#2 #1
#3
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
6.6
#2
#1
#3
CLOCKWISE
17.8
22.9
in mm
Tolerance : ±0.3
(
)
31.8
3.2±0.2
25.4±0.2
5.0
1.7
0.8±0.2
3−0.7±0.1 Dia.
#1
#2
#3
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
6.6
#2
#1
#3
CLOCKWISE
7.6
in mm
Tolerance : ±0.3
17.8
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV22p100C01
PV22p200C01
PV22p500C01
PV22p101C01
PV22p201C01
PV22p501C01
PV22p102C01
PV22p202C01
PV22p502C01
PV22p103C01
PV22p203C01
PV22p503C01
PV22p104C01
PV22p204C01
PV22p504C01
PV22p105C01
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
10ohm ±10%
20ohm ±10%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
8
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
Continued on the following page.
64
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV22p205C01
1.0W(70°C)
Flow/Soldering Iron
22
2M ohm ±10%
±100ppm/°C
Operating Temperature Range: -55 to 150 °C
The blank column is filled with the code of adjustment direction and lead type (L, S and Y).
The order quantity should be an integral multiple of the "Minimum Quantity".
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV22p100A01
PV22p200A01
PV22p500A01
PV22p101A01
PV22p201A01
PV22p501A01
PV22p102A01
PV22p202A01
PV22p502A01
PV22p103A01
PV22p203A01
PV22p503A01
PV22p104A01
PV22p204A01
PV22p504A01
PV22p105A01
PV22p205A01
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Adjustment
Screw
Post
Alumina
Substrate
Case
Cermet
Resistive
Element
Wiper
Terminal
■ Mounting Holes
PV22S
PV22Y
8
17.8
17.8
7.6
(2)
(1)
(3)
(3)
(1)
22.9
(2)
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
Continued on the following page.
65
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Shock (50G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±2%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
66
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV36 Series
1.3
0.7
Marking
1.3
■ Features
1. High resolution 25-turns enables precision
adjustment easily.
3-0.5±0.1 Dia.
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. 5 standard terminal styles
#1 #2 #3
9.6
#2 (Wiper)
#3
#1
6. Both Top and side adjustment directions.
7. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
Clockwise
PV36P
PV36W
PV36X
PV36Z
(in mm)
(Tolerance : ±0.3)
2.5 2.5
1.2
9.6
1.3
2.0 Dia.
0.6
■ Applications
1. Measuring instruments 2. OA equipment
Marking
3. Medical equipment
4. Power supply
5. Base station for cellular phone
3-0.5±0.1 Dia.
#3 #2 #1
2.5 2.5
#2 (Wiper)
#1
#3
Clockwise
(in mm)
(Tolerance : ±0.3)
9.6
0.7
1.3
Marking
1.2
3-0.5±0.1 Dia.
#3 #2 #1
2.5 2.5
#2 (Wiper)
#3
#1
Clockwise
(in mm)
(Tolerance : ±0.3)
9.6
1.2
2.0 Dia.
9.6
1.3
0.7
1.3
Marking
1.2
0.6
Marking
8
3-0.5±0.1 Dia.
3-0.5±0.1 Dia.
#3 #2 #1
#3 #2 #1
2.5 2.5
#2 (Wiper)
#3
#2 (Wiper)
#1
#1
#3
Clockwise
PV36Y
Clockwise
(in mm)
(Tolerance : ±0.3)
(in mm)
(Tolerance : ±0.3)
2.5 2.5
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV36p100C01
PV36p200C01
PV36p500C01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
10ohm ±10%
20ohm ±10%
50ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
Continued on the following page.
67
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV36p101C01
PV36p201C01
PV36p501C01
PV36p102C01
PV36p202C01
PV36p502C01
PV36p103C01
PV36p203C01
PV36p253C01
PV36p503C01
PV36p104C01
PV36p204C01
PV36p254C01
PV36p504C01
PV36p105C01
PV36p205C01
PV36p100C31
PV36p200C31
PV36p500C31
PV36p101C31
PV36p201C31
PV36p501C31
PV36p102C31
PV36p202C31
PV36p502C31
PV36p103C31
PV36p203C31
PV36p253C31
PV36p503C31
PV36p104C31
PV36p204C31
PV36p254C31
PV36p504C31
PV36p105C31
PV36p205C31
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
10ohm ±10%
±150ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).
The order quantity should be an integral multiple of the "Minimum Quantity".
The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV36W/PV36X series only).
8
68
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV36p100A01
PV36p200A01
PV36p500A01
PV36p101A01
PV36p201A01
PV36p501A01
PV36p102A01
PV36p202A01
PV36p502A01
PV36p103A01
PV36p203A01
PV36p253A01
PV36p503A01
PV36p104A01
PV36p204A01
PV36p254A01
PV36p504A01
PV36p105A01
PV36p205A01
PV36p100A31
PV36p200A31
PV36p500A31
PV36p101A31
PV36p201A31
PV36p501A31
PV36p102A31
PV36p202A31
PV36p502A31
PV36p103A31
PV36p203A31
PV36p253A31
PV36p503A31
PV36p104A31
PV36p204A31
PV36p254A31
PV36p504A31
PV36p105A31
PV36p205A31
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Adjustment Screw
Terminal
8
Case
Wiper
Cermet Resistive Element
Gear
Alumina Substrate
69
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Mounting Holes
PV36P
PV36W/X
2.5
2.5
(3)
(2)
(1)
(1)
(3)
(2)
2.5
2.5
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
PV36Y/Z
2.5
2.5
(3)
(1)
(2)
Tolerance ±0.1
in mm
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR RV1kohm, RU500kohm ±5%
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
...
8
...
1kohmFRF500kohm ±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR
R
: Insulation Resistance
: Standard Total Resistance
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV12/PV37/PV23/PV22/PV36 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
■ Notice (Soldering and Mounting)
1. Soldering
trimmer potentimeter may be damaged by
mechanical stress.
(1) Standard soldering condition
(a) Flow soldering :
(2) Do not apply excessive force (preferably 9.8N
(Ref.; 1kgf) max.), when the trimmer
potentiometer is mounted to the PCB.
3. Cleaning
>Pre-heating temp. 80-100 deg. C
>Soldering temp.
>Soldering time
260 deg. C max.
3 sec. max.
(b) Soldering iron :
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please consult with a
Murata factory representative prior to using.
(2) The total cleaning time by cold dipping, vapor
and ultrasonic washing (conditions as below)
method should be less than 3 minutes.
(3) For ultra-sonic cleaning, the available
condition is as follows.
>Temperature of tip 300 deg. C max.
>Soldering time
>Wattage of iron
3 sec. max.
40W max.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
>Power: 600W (67 liter) max.
8
>Frequency: 28kHz
(2) To minimize mechanical stress when adjusting,
the trimmer potentiometer should be mounted onto
PCB without gap.
>Temperature: Ambient temperature
Due to the ultra-sonic cleaning equipment's
peculiar self-resonance point and that the
cleaning compatibility usually depends on the jig
construction and/or the cleaning condition such
as the depth of immersion, please check the
cleaning equipment to determine the suitable
conditions.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
2. Mounting
(1) Use PCB hole to meet the pin of the trimmer
potentiometer. If the trimmer potentiometer
installs into insufficient PCB hole, the
If the trimmer potentiometer is cleaned by
other conditions, the trimmer potentiometer may
be damaged.
71
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV12/PV37/PV23/PV22/PV36 Series Notice
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
ENGINEER INC. : DA-40
applied, the trimmer potentiometer may not
function.
3. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
(Murata P/N : KMDR180)
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
8
72
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
SMDSealedType/Lead Sealed Type Specifications and Test Methods
The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification
for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts).
No.
Item
Test Methods
Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned
against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance
measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements.
This voltage should be used for all subsequent total resistance measurements.
Total Resistance,
Nominal (ohm)
Maximum Test
Voltage (V)
1
Total Resistance
10VRV100
100FRV1k
1kFRV10k
10kFRV100k
100kFR
1.0
3.0
10.0
30.0
100.0
Table 1: Total resistance test voltage
Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance
between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-
wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-
minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not
exceeded.
2
Residual Resistance
Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The
adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational
angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a
contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points
where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the
adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum
to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by
power rating.
Standard Total Resistance
Oscilloscope
Rx
Test Current
#3
#1
R (ohm)
Contact Resistance
Variation
3
RV100
20mA
10mA
4mA
2mA
1mA
200µA
100µA
50µA
30µA
#
2
Constant Current Source
(Test current shown in Table2)
100FRF500
500VRF1k
1kVRF2k
2kVRF50k
50kVRF200k
200kVRF1M
1MVRF2M
2MVR
Proofread
Resistance
AC
Amplifier
Rx : Trimmer Potentiometer
Oscilloscope bandwidth :100Hz to 50kHz
Figure 1: CRV measuring circuit
Table 2: Test current for CRV
The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45 min-
utes. Temperature coefficient of resistance should be applied to the following formula.
R2 – R1
R1 (T2 – T1)
TCR=
Z 106 (ppm/°C)
T1 : Reference temperature in degrees celsius
T2 : Test temperature in degrees celsius
R1 : Resistance at reference temperature ohm
R2 : Resistance at test temperature in ohm
Temperature Coefficient of
Resistance
4
Sequence
Temperature (°C)
1*
2
3
4*
5
6
Min. operating
Temperature
Max. operating
Temperature
+25
-15
+25
+65
Note*: Reference temperature
Table 3: Test temperatures
The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An
adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1
and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the
following formula.
E
e'
E
e
E
9
Voltage Setting
Stability
Voltage setting stability=
e : Before test
–
Z100 (%)
(
)
5
#1
#3
(The voltage between terminal #1 and terminal #2)
e': After test
#2
e
(The voltage between terminal #1 and terminal #2)
E: The voltage between terminal #1 and terminal #3
Figure 2
Continued on the following page.
79
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
SMDSealedType/LeadSealedType Specifications and Test Methods
Continued from the preceding page.
No.
Item
Test Methods
The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer
should be removed from the chamber, and maintained at a temperature of 25±5°C for 1~2 hours.
Sequence
1
2
3
4
+125±3
+25±2 +150±3 +25±2
+60±3
PV-- series
PV22 series
PVF2 series
Temp.
(°C)
-55±3
6
Temperature Cycle
-25±3
30
Time (min.)
5 max.
30
5 max.
Table 4: One cycle of temperature cycle.
1) PVC6, PV12, PV32, PV34 PVM4A---D01 series
The trimmer potentiometer should be placed in a chamber at a temperature of 40±2°C and a humidity of 90~95%
without loading for 250±8 hours (500±12 hours for PVM4A---D01 series). The trimmer potentiometer should be
removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours.
2) PVF2 series
The trimmer potentiometer should be placed in a chamber at 60±2°C and 90~95% without loading for 1000±12
hours. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C
for 5±1/6 hours
2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37 series
The trimmer potentiometer should be subjected Figure-3 the programmed humidity environment for 10 cycle. The trim-
mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1.5±1/2
hours.
MIL-STD-202 METHOD 106
80-98%RH
80-98%RH
70
65
60
55
50
45
40
35
30
25
20
90-98%RH
90-98%RH
90-98%RH
INITIAL CONDITIONING
IN A DRY OVEN
24 HOURS
RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.
HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED
TO RADIANT HEAT FROM CHAMBER-CONDITIONING
PROCESSES
7
Humidity
HUMIDITY
UNCONTROLLED
END OF FINAL CYCLE
MEASUREMENTS AS
SPECIFIED IN 3.6
+10°C
-2°C
CIRCULATION OF CONDITIONING AIR SHOULD
BE AT A MINIMUM CUBIC RATE PER MINUTE
EQUIVALENT TO 5 TIMES THE VOLUME OF
THE CHAMBER
INITIAL MEASUREMENTS
15 AS SPECIFIED IN 3.2
10
5
VOLTAGE APPLIED AS SPECIFIED IN 3.5
0
UNLESS OTHERWISE SPECIFIED
TEMPERATURE TOLERANCE IS,
-5
STEPS 7a AND 7b PERFORMED DURING ANY
5 OF THE FIRST 9 CYCLES. HUMIDITY
UNCONTROLLED DURING STEPS 7a AND 7b
ONLY
-10 ±2°C AT ALL POINTS WITHIN THE
STEP 7b
STEP 7a
CHAMBER EXCEPT THE IMMEDIATE
VICINITY OF THE SPECIMENS AND
THE CHAMBER SURFACES
PRIOR TO FIRST CYCLE
UNLESS OTHERWISE
SPECIFIED
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6
STEP 7
ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Figure 3
1) PV-- series
The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete frequen-
cy range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the three
axis direction for a total of 12 sweeps.
8
9
Vibration
2) PVF2 series
The trimmer potentiometer should be subjected to vibration at 0.3 inch amplitude. The frequency should be varied
uniformly between the approximate limits of 10Hz and 55Hz. This motion should be applied for period of 2 hours in
each of 3 mutually perpendicular directions (total of 6 hours).
1) PV-- series
The trimmer potentiometer should be shocked at the 100G (50G for PV22 and PV23 series) level and should be
subjected to 4 shocks in each of the three axis directions for a total of 12 shocks.
2) PVM4A---D01 series
Shock
The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the
six axis directions for a total of 18 shocks.
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently
between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of
1000±12 hours, at a temperature of 70±2°C (85±2°C for PV01 and PV37 series, 50±2°C for PVF2 series). The trim-
mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours.
10 Temperature Road Life
9
The trimmer potentiometer should be placed in a chamber at a temperature of 125±3°C (150±3°C for PV22 series)
250±8 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a
temperature of 25±5°C for 1 to 2 hours.
High Temperature Exposure
(Except for PVF2)
11
The trimmer potentiometer should be placed in a chamber at a temperature of -55±3°C for 1 hours without loading.
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes.
The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for
approximately 24 hours.
Low Temperature Exposure
(Except for PVF2 and
PVM4A---D01)
12
Continued on the following page.
80
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
SMDSealedType/Lead Sealed Type Specifications and Test Methods
Continued from the preceding page.
No.
13
Item
Test Methods
Low Temperature Operation
(Only for PVF2 and
PVM4A---D01)
The trimmer potentiometer should be placed in a chamber at a temperature of -25±3°C (-55±3°C for PVM4A---
D01 series) 48±4 hours without loading. The trimmer potentiometer should be removed from the chamber, and main-
tained at a temperature of 25±5°C for 1-2 hours
1)PV-- series
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit
shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of effec-
tive-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maxi-
mum for total of 200 cycles.
Resistor 1
Resistor 2
End Terminal
End Terminal
End Terminal
End Terminal
14 Rotational Life
DC supply
Figure 4
2) PVG3, PVG5 series
The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical rotation-
al angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50
(100 for PVG5) cycles, without loading.
3) PVF2, PVM4A---D01 series
The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per
minute, for 100 cycles continuously.
9
81
相关型号:
©2020 ICPDF网 联系我们和版权申明