PV32N252A01B00 [MURATA]
RESISTOR, TRIMMER, CERMET, 1 TURN(S), 0.5W, 2500ohm, ROHS COMPLIANT;型号: | PV32N252A01B00 |
厂家: | muRata |
描述: | RESISTOR, TRIMMER, CERMET, 1 TURN(S), 0.5W, 2500ohm, ROHS COMPLIANT |
文件: | 总90页 (文件大小:1941K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
Mu ra ta
Ma nu fa cturin g Co., Ltd .
Cat.No.R50E-13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
1
2
3
4
5
6
7
8
9
CONTENTS
Part Numbering
2
4
Selection Guide of Trimmer Potentiometers
1
2
3
4
5
6
7
8
9
SMD Open Type 2mm Size PVZ2 Series
PVZ2 Series Notice
5
7
SMD Open Type 3mm Size PVZ3/ PVS3/ PVA3 Series
PVZ3/PVS3/PVA3 Series Notice
9
16
19
21
23
26
28
31
33
39
41
52
54
71
73
75
77
79
82
83
88
SMD Sealed Type 2mm Size PVF2 Series
PVF2 Series Notice
SMD Sealed Type 3mm Size PVG3 Series
PVG3 Series Notice
SMD Sealed Type 4mm Size PVM4 Series
PVM4 Series Notice
SMD Sealed Type Multi-turns PVG5/ PV01 Series
PVG5/PV01 Series Notice
Lead Sealed Type Single-turn PVC6/ PV32/ PV34 Series
PVC6/PV32/PV34 Series Notice
Lead Sealed Type Multi-turns PV12/ PV37/ PV23/ PV22/ PV36 Series
PV12/PV37/PV23/PV22/PV36 Series Notice
Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series
PVS1 Series Notice
SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods
SMD Sealed Type/Lead Sealed Type Specifications and Test Methods
Angle Sensing Potentiometer Specifications and Test Methods
Packaging
Recommended Adjustment Tools/Qualified Standards
• The RoHS compliance means that we judge from EU Directive 2002/95/EC the products do not contain lead, cadmium, mercury, hexavalent
chromium, PBB and PBDE, except exemptions stated in EU Directive 2002/95/EC annex and impurities existing in natural world.
• This statement does not insure the complaince of any of the listed parts with any laws or legal imperatives developed by any EU members
individually with regards to the RoHS Directive.
Recycled Paper
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
o Part Numbering
Trimmer Potentiometers
(Part Number)
PV Z3
A
103 A01 R00
q
w
e
r
t
y
P
Y
W
Y
P
X
Z
Side, Triangle
Side, Triangle
Top, Inline
Lead Sealed 19mm
Rectangular 15-turns
23
36
qProduct ID
Product ID
PV
Trimmer Potentiometers
Top, Triangle
Side, Triangle
Side, Inline
Lead Sealed 10mm Square
25-turns
wSeries
eAdjustment Direction /Lead Type
Side, Triangle
Top, Triangle
Top, Inline
Adjustment Direction/
Lead Type
Code
Series
Code
W
Y
P
X
Z
A
K
A
K
R
Top
Rear
Top
Lead Sealed 6mm Square
12-turns
Z2
SMD Open 2mm Size
37
Side, Triangle
Side, Triangle
Side, Inline
Z3
SMD Open 3mm Size
Rear
Rear
rTotal Resistance
SMD Open 3mm Size
Stopper Low-profile
Expressed by three figures. The unit is ohm. The first and second
figures are significant digits, and the third figure expresses the
number of zeros which follow the two figures.
S3
A3
A
Top
SMD Open 3mm Size
A
A
A
G
K
A
A
H
P
W
X
A
D
E
G
H
M
Q
H
P
R
N
T
Top
F2 SMD Sealed type 2mm Size
Top
Ex.)
Code
100
Total Resistance
10ohm
Top, J-hook
Top, Gull-wing
Rear
G3
SMD Sealed 3mm Size
SMD Sealed 4mm Size
102
1000ohm
104
100000ohm (=100kohm)
M4
G5
Top
Top
SMD Sealed 5mm Square
11-turns
tIndividual Specification
Side
Code
Series
Individual Specification Code
Side
ꢀ
SMD Sealed 6mm Square
12-turns
PVZ2/PVZ3/PVS3/
PVA3/PV32/PV12
01
Top
A01
Standard Type
Side
PVG3/PVM4/PVG5/PV01/
Top, Triangle
Top, Triangle
Side, Triangle
Side, Triangle
Side, Triangle
Top, Inline
Side, Inline
Top, Triangle
Top, Triangle
Top, Inline
Side, Triangle
Side, Triangle
Side, Triangle
Top, Triangle
Top, Triangle
Side, Triangle
Side, Triangle
Side, Inline
Top, Triangle
Top, Triangle
Side, Triangle
Side, Triangle
Side
C01 PVC6/PV34/PV22/PV23/
PV36/PV37
Standard Type
A04
C01
E01
D01
C31
C04
PVZ2
PVZ3
Ultra-thin Type
High-heat Resistance Type (for Top Adjustment)
High-heat Resistance Type (for Rear Adjustment)
High-liability Type
Lead Sealed 6mm Square
Single-turn
C6
PVZ3
PVM4
PV36/PV37
PVC6
Radial Taping
Radial Taping
Standard Type (Resistance Change
Characteristics : Linear)
A11
A41
A81
A51
A91
PVF2
PVF2
PVF2
PVF2
PVF2
Lead Sealed 6mm Round
Single-turn
32
34
Standard Type (Resistance Change
Characteristics : Log curve)
Standard Type (Resistance Change
Characteristics : Log curve)
S
F
Standard Type (Resistance Change
Characteristics : Log-log curve)
P
H
X
W
H
P
T
Lead Sealed 9mm Square
Single-turn
Standard Type (Resistance Change
Characteristics : Log-log curve)
yPackaging
Lead Sealed 7mm Round
4-turns
12
22
Code
A00
Packaging
Ammo Pack
Bulk
S
L
B00
Lead Sealed
31mm Rectangular
22-turns
M00*
R00
Magazine
Reel
S
Y
Side, Inline
Side, Triangle
* M12 for PV36P Type and M15 for PV36W/Y/X/Z Type.
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Angle Sensing Potentiometers
(Part Number)
PV S1
A
103 A01 R00
q
w
e
r
t
y
qProduct ID
tIndividual Specification Code
Product ID
Code
A01
A03
Individual Specification Code
Trimmer Potentiometers
(Rotary Position Sensor)
SMD Type Standard
Lead Type Standard
PV
wSeries
yPackaging
Code
Series
Code
B00
R00
T00
Packaging
Bulk
S1
Dust-proof Type 12mm Size
Reel
eTerminal Shape
Tray
Code
Terminal Shape
SMD Type
A
L
Lead Type
rTotal Resistance
Expressed by three figures. The unit is ohm. The first and second
figures are significant digits, and the third figure expresses the
number of zeros which follow the two figures.
Ex.)
Code
Total Resistance
103
10000 ohm (=10k ohm)
PVS1 Series will be changed to new part number since Oct. 1, 2004. Details is as follows.
(Part Number)
SV 01
A
103 AE A01 R00
q
w
e
r
t
y
u
qProduct ID
tRotor Hole Shape/Rotor Hole Size
Product ID
Code
AD
Rotor Hole Shape/Rotor Hole Size
D Hole/3.5mm Dia.
SV
Rotary Position Sensor
AE
D Hole/4.0mm Dia.
wSeries
CE
T Hole/4.0mm Dia.
Code
Series
yIndividual Specification Code
01
Carbon Rotary Position Sensor
Code
A01
A03
Individual Specification Code
eTerminal Shape
SMD Type Standard
Lead Type Standard
Code
Terminal Shape
SMD Type
A
L
uPackaging
Lead Type
Code
B00
R00
T00
Packaging
Bulk
rTotal Resistance
Expressed by three figures. The unit is ohm. The first and second
figures are significant digits, and the third figure expresses the
number of zeros which follow the two figures.
Reel
Tray
Ex.)
Code
Total Resistance
103
10000 ohm (=10k ohm)
3
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Selection Guide of Trimmer Potentiometers
Start
Mounting Method
Surface Mount
PCB Insertion
Sealed Construction
Construction
Adjustment
Open
Sealed
Top
Side
Resistive Element
Resistive Element
Carbon
Cermet
Carbon
Cermet
Cermet Resistive Element
2mm size Single Turn
3mm size Single Turn
2mm size Single Turn
3mm size Single Turn
6mm size Single Turn
6mm size Single Turn
for Automatic Adjustment
with Rotational Stop
for Automatic Adjustment
with Rotational Stop
with Rotational Stop
with Rotational Stop
Low Height
with Rotational Stop
(0.85mm max.)
PVZ2A_A04
(1.0mm max.)
PVZ2A_A01
PVF2
PVS3
PVA3
PVG3A
PVC6A/D/M
PVC6E/G/H/Q
7mm size 4 Turns
7mm size 4 Turns
with Rotational Stop
Rear Adjustment
PVG3G
PV12H/P
PV12T/S
PVZ2K
6mm size 12 Turns
6mm size 12 Turns
Rear Adjustment
with Rotational Stop
3mm size Single Turn
for Automatic Adjustment
PVG3K
PV37W/Y
PV37P/X/Z
PVZ3A
Rear Adjustment
4mm size Single Turn
10mm size 25 Turns
10mm size 25 Turns
PVZ3K
Rear Adjustment
Low profile (1.5mm max.)
PVM4
PV36W/Y
PV36P/X/Z
5mm size 11 Turns
19mm size 15 Turns
PVZ3R
PVG5
PV23P/Y
4
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
1
Trimmer Potentiometers
SMD Open Type 2mm Size PVZ2 Series
2.1
0.8
#2
2
0.5
0.4
■ Features
Soldering Part
2.4 Dia.
1
1. Ultra-small and thin external dimensions of
2.1(W)x2.7(L)x0.85 max. (T)mm.
(PVZ2A_A04 Series)
2. Au plated termination achieves a high density
P.C.B. mounting.
#1
#3
#2
0.7
0.55
0.55
3. Cross-shaped driver slot allows for in-process
automatic adjustment and it provides superior
adjustability.
#1
#3
CLOCKWISE
1
2
Driver Plate Rotation Area :
Please do not place any components
more than 0.7mm in height within this area.
PVZ2A_A01 : 0.9±0.1
PVZ2A_A04 : 0.8±0.05
PVZ2A
in mm
4. Two-piece parts construction achieves low cost and
excellent quality.
(
)
Tolerance : ±0.2
5. Special resin substrate allows high peak temperature
for reflow soldering.
2.1
0.8
+0.1
0.9
-
0.2
#2
2.4 Dia.
*1
■ Applications
1. Pick-up module
3. Cellular-phone
5. Pager
2. LCD
4. PHS
6. DVC
7. Digital camera
8. Portable audio, etc.
Soldering
Part
#1
#3
#2
0.65 0.6 0.65
#1
CLOCKWISE
#3
1. Driver Plate Rotation Area :
Please do not place any components
more than 0.7mm in height within this area.
PVZ2K
in mm
(
)
Tolerance : ±0.2
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVZ2p501A01
PVZ2p102A01
PVZ2p202A01
PVZ2p302A01
PVZ2p502A01
PVZ2p103A01
PVZ2p203A01
PVZ2p303A01
PVZ2p503A01
PVZ2p104A01
PVZ2p204A01
PVZ2p304A01
PVZ2p504A01
PVZ2p105A01
PVZ2p501A04
PVZ2p102A04
PVZ2p202A04
PVZ2p302A04
PVZ2p502A04
PVZ2p103A04
PVZ2p203A04
PVZ2p303A04
PVZ2p503A04
PVZ2p104A04
PVZ2p204A04
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
500ohm ±30%
1k ohm ±30%
2k ohm ±30%
3k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
30k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
300k ohm ±30%
500k ohm ±30%
1M ohm ±30%
500ohm ±30%
1k ohm ±30%
2k ohm ±30%
3k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
30k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
Continued on the following page.
5
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
1
PVZ2p304A04
PVZ2p504A04
PVZ2p105A04
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(240°±10°)
1(240°±10°)
1(240°±10°)
300k ohm ±30%
500k ohm ±30%
1M ohm ±30%
±500ppm/°C
±500ppm/°C
±500ppm/°C
The blank column is filled with the code of adjustment direction A (top) or K (rear).
■ Construction
■ Standard Land Pattern
PVZ2A
PVZ2A
0.9
0.6
0.7
0.6
in mm
Tolerance : ±0.1
(
)
■ Construction
PVZ2K
■ Standard Land Pattern
PVZ2K
0.9
#2-Terminal
Driver Plate
3.4 Dia.
#1-Terminal
Wiper
Resistive
Element
0.7 0.6 0.7
Resin Substrate
#3-Terminal
in mm
Tolerance : ±0.1
(
)
■ Characteristics
Humidity Exposure
High Temperature
Exposure
Res. Change : +10, -2%
<
Res. Change : R 50kohm···+2, -10%
=
50kohm<R···+2, -15%
Humidity Load Life
Res. Change : ±10%
<
Res. Change : R 50kohm···+2, -10%
=
Load Life
50kohm<R···+2, -15%
Temperature Cycle
Temperature Coefficient
of Resistance
Res. Change : ±5%
±500ppm/˚C
Rotational Life
Res. Change : ±10% (10 cycles)
6
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVZ2 Series Notice
1
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
4. If the trimmer potentiometer is used in DC and high
humidity conditions, please connect wiper (#2) for
plus and resistive element (#1 or #3) for minus.
■ Notice (Soldering and Mounting)
1. Soldering
The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the
dimension of land pattern used should be Murata's
standard land pattern at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
(1) Reflow soldering and Soldering Iron are
available. Cannot be soldered using the flow
soldering method. If you use the flow soldering
method, the trimmer potentiometer may not
function.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of the
surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(5) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
(3) Standard soldering condition
(a) Reflow soldering :
2. Mounting
Refer to the standard temperature profile.
(b) Soldering iron:
(1) Do not apply excessive force (preferably 4.9N
(Ref.; 500gf) max.), when the trimmer
potentiometer is mounted to the PCB.
(2) Do not warp and/or bend PC board to prevent
trimmer potentiometer from breakage.
(3) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 1.5-1.8mm dia. and inner dimension
1.3mm dia.
>Temperature of tip 360 deg. C max.
>Soldering time
>Diameter
3 sec. max.
1mm max.
>Wattage of iron 30W max.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer potentiometer may deviate from the
specified characteristics.
3. Cleaning
(1) In case there is flux on the resistive element,
clean sufficiently with cleaning solvents and
completely remove all residual flux.
(2) Isopropyl-alcohol and Ethyl-alcohol are
Continued on the following page.
(4) Apply the appropriate amount of solder paste.
7
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVZ2 Series Notice
1
Continued from the preceding page.
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
performance by your product.
■ Reflow Soldering Standard Profile
For reflow soldering
Gradual Cooling
(in the air)
Pre-heating (in the air)
Soldering
230
200
100
0
60-120 sec.
30 sec. max.
Time
(Melting zone)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
PVZ2A_A01=Murata P/N : KMDR090
3. Please use within the effective rotational angle.
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
PVZ2A_A04=Murata P/N : KMDR150
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
4. When using a lock paint to fix slot position,
please consult with a Murata factory representative
prior to using to prevent corrosion and contact
intermittence.
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
8
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
SMD Open Type 3mm Size PVZ3/PVS3/PVA3 Series
2
PVZ3 Series
3.1
1.0
#2
1.15 Dia.
2.2 Dia.
1.85±0.1
■ Features
0.25±0.1
0.1max.
3.0 Dia.
1. Excellent solderability characteristics are
achieved via special plating techniques on each
termination.
2. Specially designed substrate prevents wicking of
#1
#3
0.75
1.0
0.75
flux onto the top of the part body.
3. Funnel shaped adjustment slot allows for in-process
automatic adjustment.
#2
#1
CLOCKWISE
#3
4. High-heat resistance type is available
(PVZ3A_C01/PVZ3K_E01/PVZ3R_E01).
5. Enlarged bottom termination enhance soldering
strength while reducing the necessary land area
required promoting high-density PCB mounting.
6. Flat surface is provided for smooth pick and place
(PVZ3K only).
PVZ3A
PVZ3K
PVZ3R
in mm
)
(
Tolerance : ±0.3
2.1
3.1
#2
1.85±0.1
0.25±0.1
7. The standard position of driver plate is adjusted
at the center normally, but another position is
also available.
#3
#1
Soldering part
1.1
1.15 Dia.
2.2 Dia.
3.0 Dia.
8. This product meets Pb-free.
#2 (Wiper Contact)
#3
#1
CLOCKWISE
■ Applications
CIRCUIT
(
1. Optical pick up
2. Cordless telephones
4. FDD
3. CD players
in mm
Tolerance : ±0.3
0.85 0.9 0.85
)
5. Motor
6. CD-ROMs
7. Car stereos
9. Headphone stereos
8. TFT-LCD TV sets
1.4±0.1 0.5±0.1
3.1
#2
#3
#1
Soldering part
1.15 Dia.
2.2 Dia.
3.0 Dia.
1.1
#2 (Wiper Contact)
#3
#1
CLOCKWISE
CIRCUIT
(
in mm
Tolerance : ±0.3
0.85 0.9 0.85
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
0.1W(50°C)
Soldering Method
Total Resistance Value
TCR
PVZ3A201p
PVZ3A301p
PVZ3A501p
PVZ3A102p
PVZ3A202p
PVZ3A302p
PVZ3A502p
PVZ3A103p
PVZ3A203p
PVZ3A303p
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
200ohm ±30%
300ohm ±30%
500ohm ±30%
1k ohm ±30%
2k ohm ±30%
3k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
30k ohm ±30%
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
Continued on the following page.
9
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVZ3A503p
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
0.1W(50°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
1(230°±10°)
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
300k ohm ±30%
500k ohm ±30%
1M ohm ±30%
2M ohm ±30%
200ohm ±30%
300ohm ±30%
500ohm ±30%
1k ohm ±30%
2k ohm ±30%
3k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
30k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
300k ohm ±30%
500k ohm ±30%
1M ohm ±30%
2M ohm ±30%
200ohm ±30%
300ohm ±30%
500ohm ±30%
1k ohm ±30%
2k ohm ±30%
3k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
30k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
300k ohm ±30%
500k ohm ±30%
1M ohm ±30%
2M ohm ±30%
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
PVZ3A104p
PVZ3A204p
PVZ3A304p
PVZ3A504p
PVZ3A105p
2
PVZ3A205p
PVZ3K201E01
PVZ3K301E01
PVZ3K501E01
PVZ3K102E01
PVZ3K202E01
PVZ3K302E01
PVZ3K502E01
PVZ3K103E01
PVZ3K203E01
PVZ3K303E01
PVZ3K503E01
PVZ3K104E01
PVZ3K204E01
PVZ3K304E01
PVZ3K504E01
PVZ3K105E01
PVZ3K205E01
PVZ3R201E01
PVZ3R301E01
PVZ3R501E01
PVZ3R102E01
PVZ3R202E01
PVZ3R302E01
PVZ3R502E01
PVZ3R103E01
PVZ3R203E01
PVZ3R303E01
PVZ3R503E01
PVZ3R104E01
PVZ3R204E01
PVZ3R304E01
PVZ3R504E01
PVZ3R105E01
PVZ3R205E01
The blank column is filled with the code of individual specification A01 (standard type) and C01 (high-heat resistance type).
10
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Construction
■ Standard Land Pattern
PVZ3A
PVZ3K
PVZ3R
PVZ3A
1.1
2
1.0
0.7
1.0
in mm
Tolerance : ±0.1
(
)
■ Construction
■ Standard Land Pattern
PVZ3K
Driver Plate
#2-Terminal
1.5
#1-Terminal
Wiper
0.5
3.0
Resistive Element
(Carbon)
#3-Terminal
in mm
Tolerance : ±0.1
(
)
Resin Substrate
■ Construction
■ Standard Land Pattern
PVZ3R
Driver Plate
#2-Terminal
1.5
#1-Terminal
4.0 Dia.
Wiper
Resistive Element
(Carbon)
1.25
1.25
3.0
#3-Terminal
in mm
Tolerance : ±0.1
Resin Substrate
(
)
■ Characteristics
Humidity Exposure
Res. Change : +10, -2%
<
High Temperature
Exposure
Res. Change : R 100kohm···+2, -10%
=
100kohm<R···+2, -15%
Humidity Load Life
Res. Change : ±10%
<
Res. Change : R 100kohm···+2, -10%
=
Load Life
100kohm<R···+2, -15%
Temperature Cycle
Temperature Coefficient
of Resistance
Res. Change : ±5%
±500ppm/˚C
Rotational Life
Res. Change : ±10% (10 cycles)
11
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVS3 Series
Soldering part
3.0
2.3±0.1
1.0
1.5±0.1
1.5
1.2 Dia.
3.0 Dia.
■ Features
1.25
#2
4.1Dia.
1
1. Funnel shaped slot allows for in-process automatic
adjustment and it provides superior adjustability.
2. Easy insertion and operation of adjustment
screwdriver
2
0.3±0.1
3. Low profile of 1.5mm height with stopper
4. Plated termination achieves high resistance to
solder leaching.
#3
#1
1.1
0.7 1.1 0.7
0.85
#2 (Wiper Contact)
1.Driver Plate Rotation Area:
Please do not place any components
more than 0.7mm in height within
this area.
#1
#3
5. Screwdrivers for adjustment are available on the
market.
CLOCKWISE
CIRCUIT
in mm
(
)
Tolerance : ±0.3
■ Applications
1. Camcorders
2. Video disk players
4. Headphone stereos
6. Micro-motors
3. TFT-LCD TV sets
5. Cordless telephones
7. Optical cameras
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
0.1W(70°C)
Soldering Method
Total Resistance Value
TCR
PVS3A101A01
PVS3A201A01
PVS3A301A01
PVS3A501A01
PVS3A102A01
PVS3A202A01
PVS3A302A01
PVS3A502A01
PVS3A103A01
PVS3A203A01
PVS3A303A01
PVS3A503A01
PVS3A104A01
PVS3A204A01
PVS3A304A01
PVS3A504A01
PVS3A105A01
PVS3A205A01
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
100ohm ±25%
200ohm ±25%
300ohm ±25%
500ohm ±25%
1k ohm ±25%
2k ohm ±25%
3k ohm ±25%
5k ohm ±25%
10k ohm ±25%
20k ohm ±25%
30k ohm ±25%
50k ohm ±25%
100k ohm ±25%
200k ohm ±25%
300k ohm ±25%
500k ohm ±25%
1M ohm ±25%
2M ohm ±25%
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
■ Construction
■ Standard Land Pattern
1.6
Driver Plate
Wiper
Stopper /
#2 Terminal
Stopper
Resistive
Element
#1 Terminal
#3 Terminal
1.1
0.8
1.1
Ceramic
Substrate
in mm
Tolerance : ±0.1
(
)
Continued on the following page.
12
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Characteristics
Humidity Exposure
Res. Change : ±3%
Res. Change : ±3%
High Temperature
Exposure
Humidity Load Life
Load Life
Res. Change : ±3%
Res. Change : ±3%
Res. Change : ±3%
Temperature Cycle
Temperature Coefficient
of Resistance
2
±250ppm/˚C
Rotational Life
Res. Change : ±10% (10 cycles)
13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVA3 Series
1.85±0.1
3.0
2.4±0.1
#2
2.2 Dia.
1.2 Dia.
3.0 Dia.
0.7
0.3±0.1
■ Features
1. Funnel shaped slot allows for in-process automatic
adjustment and it provides superior adjustability.
2. Easy insertion and operation of adjustment
screwdriver
#1
#3
1.1 0.7
0.7
0.7
2
1.5
0.6
3. Plated termination achieves high resistance to
solder leaching.
#2
#1
#3
4. Screwdrivers for adjustment are available on the
market.
CLOCKWISE
in mm
Tolerance : ±0.3
5. Recommended for both reflow and flow soldering
method. (Need cleaning for flow soldering method)
(
)
■ Applications
1. Camcorders
2. Video disk players
4. Headphone stereos
6. Micro-motors
3. TFT-LCD TV sets
5. Cordless telephones
7. Optical cameras
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
0.1W(70°C)
Soldering Method
Total Resistance Value
TCR
PVA3A101A01
PVA3A201A01
PVA3A301A01
PVA3A501A01
PVA3A102A01
PVA3A202A01
PVA3A302A01
PVA3A502A01
PVA3A103A01
PVA3A203A01
PVA3A303A01
PVA3A503A01
PVA3A104A01
PVA3A204A01
PVA3A304A01
PVA3A504A01
PVA3A105A01
PVA3A205A01
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
1(270°±10°)
100ohm ±25%
200ohm ±25%
300ohm ±25%
500ohm ±25%
1k ohm ±25%
2k ohm ±25%
3k ohm ±25%
5k ohm ±25%
10k ohm ±25%
20k ohm ±25%
30k ohm ±25%
50k ohm ±25%
100k ohm ±25%
200k ohm ±25%
300k ohm ±25%
500k ohm ±25%
1M ohm ±25%
2M ohm ±25%
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
■ Construction
■ Standard Land Pattern
1.6
1.1
0.8
1.1
in mm
Tolerance : ±0.1
(
)
Continued on the following page.
14
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Characteristics
Humidity Exposure
Res. Change : ±3%
Res. Change : ±3%
High Temperature
Exposure
Humidity Load Life
Load Life
Res. Change : ±3%
Res. Change : ±3%
Res. Change : ±3%
Temperature Cycle
Temperature Coefficient
of Resistance
2
±250ppm/˚C
Rotational Life
Res. Change : ±10% (10 cycles)
15
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVZ3/PVS3/PVA3 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
2
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
4. If the trimmer potentiometer is used in DC and high
humidity conditions, please connect wiper (#2) for
plus and resistive element (#1 or #3) for minus.
(PVZ3 Series only)
■ Notice (Soldering and Mounting)
1. Soldering
If you use the flow soldering method, the
trimmer potentiometer may not function.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
(1) Standard soldering condition
(a) Reflow soldering :
Refer to the standard temperature profile.
(b) Soldering iron:
*PVZ3A_A01 series
potentiometer may be damaged.
>Temperature of tip 260 deg. C max.
(4) Apply the appropriate amount of solder paste.
The thickness of solder paste should be printed
from 150 micro m to 200 micro m (PVZ3 series
should be printed from 100 micro m to 150 micro m)
and the dimension of land pattern used should be
Murata's standard land pattern at reflow
soldering. Insufficient amounts of solder can
lead to insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
>Soldering time
>Diameter
3 sec. max.
2mm max.
30W max.
>Wattage of iron
*PVZ3A_C01, PVZ3K_E01, PVZ3R_E01 series
*PVS3, PVA3 series
>Temperature of tip 360 deg. C max.
>Soldering time
>Diameter
3 sec. max.
2mm max.
30W max.
>Wattage of iron
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
2. Mounting
(1) Use our standard land dimension. Excessive land
area causes displacement due to the effect of the
surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(2) Do not apply excessive force (preferably 4.9N
(Ref.; 500gf) max.), when the trimmer
potentiometer is mounted to the PCB.
(3) Do not warp and/or bend PC board to prevent
Continued on the following page.
(2) Flow soldering is available for PVA3 series.
For PVZ3 and PVS3, do not use flow
soldering method (dipping).
16
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVZ3/PVS3/PVA3 Series Notice
Continued from the preceding page.
trimmer potentiometer from breakage.
(4) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 2.5-2.8mm dia. and inner dimension
2mm dia.
clean sufficiently with cleaning solvents and
completely remove all residual flux.
(2) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
performance by your product.
2
3. Cleaning
(1) In case there is flux on the resistive element,
■ Flow Soldering Standard Profile
PVA3 Series Only
For flow soldering
Gradual Cooling
(in the air)
Pre-heating (in the air)
Soldering
250
200
100
0
Time
60-120 sec.
5 sec. max.
■ Reflow Soldering Standard Profile
PVA3/PVS3/PVZ3_A01 Series
PVZ3_C01/E01 Series
For reflow soldering
For refllow soldering
Gradual cooling
(in the air)
Gradual Cooling
(in the air)
Pre-heating (in the air)
Soldering
Pre-heating (in the air)
Soldering
260
220
230
200
180
150
100
100
0
Time
60-120 sec.
30 sec. max.
Time
60-120 sec.
30-40 sec.
(Melting zone)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
<PVZ3/PVA3 series>
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
VESSEL MFG. : NO.9000+1.7x30
(Murata P/N : KMDR080)
3. For PVZ3 and PVA3 series, please use within the
effective rotational angle.
<PVZ3/PVA3/PVS3 series>
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
TORAY MFG. : SA-2225
(Murata P/N : KMDR070)
* Recommended screwdriver for automatic
adjustment
4. When using a lock paint to fix slot position,
please consult with a Murata factory representative
prior to using to prevent corrosion and contact
intermittence.
TORAY MFG. : JB-2225
(Murata P/N : KMBT070)
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
17
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVZ3/PVS3/PVA3 Series Notice
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
18
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
SMD Sealed Type 2mm Size PVF2 Series
2.30±0.15
0.50
0.30
■ Features
1. Ultra-compact size of "2x2x2.3mm"
Marking
2.00
#2
1.6dia.
0.50
2. A sealed structure prevents liquids (water,
cleaning liquid, sweat, etc.) from entering.
3. As for the resistance change characteristics, both
a log curve type and linear type are available.
4. A rotation service life of 100 cycles is quaranteed.
5. Can be automatically mounted using a chip placer,
as well as mounted using reflow soldering.
#1 #3
0.30
0.50
0.30±0.15
#2 (Wiper contact)
#3
3
#1
Clockwise
in mm
Tolerance : ±0.10
CIRCUIT
(
)
■ Applications
1. Hearing aids
2. Ultra-compact sensors or the like
3. Applications requiring ultra-compactness, and a
sealed structure
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVF2A501A11
PVF2A102A11
PVF2A202A11
PVF2A502A11
PVF2A103A11
PVF2A203A11
PVF2A503A11
PVF2A104A11
PVF2A204A11
PVF2A504A11
PVF2A105A11
PVF2A102A41
PVF2A202A41
PVF2A502A41
PVF2A103A41
PVF2A203A41
PVF2A503A41
PVF2A104A41
PVF2A204A41
PVF2A504A41
PVF2A102A51
PVF2A202A51
PVF2A502A51
PVF2A103A51
PVF2A203A51
PVF2A503A51
PVF2A104A51
PVF2A204A51
PVF2A504A51
PVF2A102A81
PVF2A202A81
PVF2A502A81
PVF2A103A81
PVF2A203A81
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
500ohm ±30%
1k ohm ±30%
2k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
500k ohm ±30%
1M ohm ±30%
1k ohm ±30%
2k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
500k ohm ±30%
1k ohm ±30%
2k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
500k ohm ±30%
1k ohm ±30%
2k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
Continued on the following page.
19
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVF2A503A81
PVF2A104A81
PVF2A204A81
PVF2A504A81
PVF2A102A91
PVF2A202A91
PVF2A502A91
PVF2A103A91
PVF2A203A91
PVF2A503A91
PVF2A104A91
PVF2A204A91
PVF2A504A91
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
0.001W(50°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
500k ohm ±30%
1k ohm ±30%
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
±500ppm/°C
2k ohm ±30%
5k ohm ±30%
10k ohm ±30%
20k ohm ±30%
50k ohm ±30%
100k ohm ±30%
200k ohm ±30%
500k ohm ±30%
3
The last three digits express the individual specification codes for Resistant Curve. Please refer to Resistance Curve on the following page for characteristics.
■ Construction
■ Standard Land Pattern
Shaft
0.60
O-ring
Rotor
Case
0.60
0.60
0.40
Terminal
Wiper
Substrate
in mm
Tolerance : ±0.10
(
)
Resistive Element
■ Characteristics
Temperature Cycle
∆TR ±5%
Humidity
∆TR ±15, -2%
∆V.S.S. ±5%
∆V.S.S. ±5%
∆TR +2, -10%
∆TR ±3%
Vibration
Shock (100G)
Temperature Load Life
Low Temperature Exposure
Rotational Life (100 cycles)
∆TR: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
∆TR ±10%
■ Resistance Curve
Linear-log. curve (Measured from terminal 1 to 2)
Linear-log. log. curve (Measured from terminal 2 to 3)
100
90
80
70
60
50
40
30
20
10
0
100
90
80
A11
A81
A41
A11
70
A91
60
50
A51
40
30
20
10
0
0
#1
20
40
60
80
100
#3
0
#1
20
40
60
80
100
#3
Percent clockwise rotation
Percent clockwise rotation
20
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVF2 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
3
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
4. If the trimmer potentiometer is used in DC and high
humidity conditions, please connect wiper (#2) for
plus and resistive element (#1 or #3) for minus.
■ Notice (Soldering and Mounting)
1. Soldering
the trimmer potentiometer may not function.
2. Mounting
(1) Standard solder iron condition
(a) Reflow soldering:
(1) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
Refer to the standard temperature profile.
(b) Sodering iron:
>Temperature of tip 260 deg. C max.
>Soldering time
>Diameter
3 sec. max.
1mm dia. max.
30W max.
(2) Do not apply excessive force (preferably 4.9N
(Ref.; 500gf) max.), when the trimmer
potentiometer is mounted to the PCB.
(3) Do not warp and/or bend PC board to prevent
trimmer potentiometer from breakage.
3. Cleaning
>Wattage of iron
Before using other soldering conditions than
those listed above, please consult with a Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please consult with a
Murata factory representative prior to using.
(2) The total cleaning time by cold dipping, vapor
and ultrasonic washing (conditions as below)
method should be less than 3 minutes.
(3) For ultra-sonic cleaning, the available
condition is as follows.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
>Power: 600W (67 liter) max.
>Frequency: 28kHz
potentiometer may be damaged.
>Temperature: Ambient temperature
Due to the ultra-sonic cleaning equipment's
peculiar self-resonance point and that the
Continued on the following page.
(4) Cannot be soldered using the flow soldering
method. If you use the flow soldering method,
21
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVF2 Series Notice
Continued from the preceding page.
cleaning compatibility usually depends on the
jig construction and/or the cleaning condition
such as the depth of immersion, please check
the cleaning equipment to determine the suitable
conditions.
If the trimmer potentiometer is cleaned by
other conditions, the trimmer potentiometer may
be damaged.
■ Reflow Soldering Standard Profile
For reflow soldering
Gradual Cooling
(in the air)
Pre-heating (in the air)
Soldering
230
200
3
100
0
60-120 sec.
30 sec. max.
Time
(Melting zone)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
3. The rotational torque at the position of the
adjustment range should not exceed the stop
strength.
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
22
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
SMD Sealed Type 3mm Size PVG3 Series
3.6
2.0
0.45
0.4 Depth
■ Features
#2
1. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
2. Driver plate with cross-slot is suitable for
automatic adjustment.
0.1 Min.
0.6
#3
#1
2.3
1.00±0.15
3. Rotor with large diameter and deep groove improves
driver insertion.
#2
4. J-hook, Gull wing terminal shape. Rear and through
hole terminal shape.
#1
#3
PVG3A
PVG3G
PVG3K
CLOCKWISE
0.75±0.15
5. 3mm and 4mm land pattern can be used without change.
(Gull wing is suitable for 4mm size land pattern.)
6. Heat resistance performance enables high
temperature peak re-flow soldering.
7. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
in mm
Tolerance : ±0.3
(
)
3.6
2.0
0.45
4
0.4 Depth
#2
0.1 Min.
#3
#1
2.3
■ Applications
1.00±0.15
1. Small sensors
2. Optical Transceiver Module
4. Printer
3. Copier
#2
5. Compact Power Supply 6. Wireless Radio module
#1
#3
CLOCKWISE
(
0.75±0.15
in mm
Tolerance : ±0.3
)
3.6
1.1
(2.5)
2.0
#2
#3
#1
0.8±0.2
0.5
0.55 Depth
0.5
2.3
#2
#1
#3
CLOCKWISE
in mm
Tolerance : ±0.3
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVG3p100C01
PVG3p200C01
PVG3p500C01
PVG3p101C01
PVG3p201C01
PVG3p501C01
PVG3p102C01
PVG3p202C01
PVG3p502C01
PVG3p103C01
PVG3p203C01
PVG3p503C01
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(210°±10°)
1(210°±10)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
10ohm ±20%
20ohm ±20%
50ohm ±20%
100ohm ±20%
200ohm ±20%
500ohm ±20%
1k ohm ±20%
2k ohm ±20%
5k ohm ±20%
10k ohm ±20%
20k ohm ±20%
50k ohm ±20%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
Continued on the following page.
23
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVG3p104C01
PVG3p204C01
PVG3p504C01
PVG3p105C01
PVG3p205C01
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
100k ohm ±20%
200k ohm ±20%
500k ohm ±20%
1M ohm ±20%
2M ohm ±20%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
The blank column is filled with the code of adjustment direction and lead type A (top, J-hook), G (top, gull-wing), or K (rear).
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PVG3p100A01
PVG3p200A01
PVG3p500A01
PVG3p101A01
PVG3p201A01
PVG3p501A01
PVG3p102A01
PVG3p202A01
PVG3p502A01
PVG3p103A01
PVG3p203A01
PVG3p503A01
PVG3p104A01
PVG3p204A01
PVG3p504A01
PVG3p105A01
PVG3p205A01
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
1(210°±10°)
10 ohm±20%
20 ohm±20%
50 ohm±20%
100 ohm±20%
200 ohm±20%
500 ohm±20%
1k ohm±20%
2k ohm±20%
5k ohm±20%
10k ohm±20%
20k ohm±20%
50k ohm±20%
100k ohm±20%
200k ohm±20%
500k ohm±20%
1M ohm±20%
2M ohm±20%
±250
±250
±250
±250
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
4
(Cd included)
■ Construction
PVG3A/PVG3G
PVG3K
Rotor
Cover
Rotor
2
#2-Terminal
Cover
#2-Terminal
2
Case
M
Case
M
#3-Terminal
#3-Terminal
Wiper
Resistive
Element
Resistive
Element
Wiper
Ceramic
Substrate
Ceramic
Substrate
#1-Terminal
O-Ring
O-Ring
#1-Terminal
■ Standard Land Pattern
PVG3A
PVG3G
1.4
1.4
1.1
1.2
1.1
1.1
1.2
1.1
in mm
Tolerance : ±0.1
in mm
Tolerance : ±0.1
(
)
(
)
Continued on the following page.
24
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Standard Land Pattern
PVG3K
1.5
3.2 dia.
1.2
1.1
1.2
in mm
Tolerance : ±0.1
(
)
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S ±1%
∆TR ±2%
∆V.S.S ±1%
Humidity
4
IR
10Mohm min.
∆TR
±1%
Vibration (20G)
∆V.S.S ±1%
∆TR ±1%
∆V.S.S ±1%
Shock (100G)
∆TR
±3% or 3ohm max., whichever is greater
Temperature Load Life
∆V.S.S ±1%
∆TR
∆V.S.S ±2%
∆TR ±3%
∆V.S.S ±2%
∆TR RV100ohm ±3% or 2ohm max., whichever is greater
...
±2%
Low Temperature Exposure
High Temperature Exposure
Rotational Life (50cycles)
...
RG100kohm +0/-10%
∆TR
: Total Resistance Change
∆V.S.S : Voltage Setting Stability
IR
R
: Insulation ResistanceR
: Standard Total Resistance
25
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVG3 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
4
■ Notice (Soldering and Mounting)
1. Soldering
2. Mounting
(1) Standard soldering condition
(a) Reflow soldering :
(1) Use our standard land dimension. Excessive land
area causes displacement due to the effect of the
surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
Refer to the standard temperature profile.
(b) Soldering iron
Temperature of tip : 400 deg. C max.
Soldering time
Diameter of tip
Wattage of iron
: 3 sec. max.
: 2mm dia. max.
: 30W max.
(2) Do not apply excessive force (preferably 4.9N
(Ref.; 500gf) max.), when the trimmer
potentiometer is mounted to the PCB.
(3) Do not warp and/or bend PC board to prevent
trimmer potentiometer from breakage.
(4) In chip placers, the size of the cylindrical
pick-up nozzle should be outer dimension
2.5-3.0mm dia. and inner dimension
2.0-2.5mm dia..
Before using other soldering conditions more
than those listed above, please consult with a
Murata factory representative prior to using.
If the soldering conditions are not
suitable, e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
(2) Cannot be soldered using the flow soldering
method. If you use the flow soldering method,
the trimmer potentiometer may not function.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
3. Cleaning
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please consult with a
Murata factory representative prior to using.
(2) Less than 3 minutes of total cleaning time by
dipping, vapor and ultra-sonic method.
(3) In case of ultra-sonic cleaning method, cleaning
conditions should be as follows.
potentiometer may be damaged.
(4) Apply the appropriate amount of solder paste.
If the amount of solder paste applied to the
land is insufficient, the required adhesive
strength cannot be obtained. If an excessive
amount of solder paste is applied, solder
bridging or flux overflow to the resistive
element surface can occur.
(a) Power: 600W (67lit.) max.
(b) Frequency: 28kHz
(c) Temperature: Ambient temperature
Due to ultra-sonic cleaning equipment's peculiar
self-resonance point and that cleaning
compatibility usually depends on the jig
Continued on the following page.
26
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVG3 Series Notice
Continued from the preceding page.
construction and/or the cleaning condition such
as the depth of immersion, please check the
cleaning equipment to determine the suitable
conditions. If the condition is not suitable,
the trimmer potentiometer may deviate from
specified characteristics.
■ Reflow Soldering Standard Profile
Gradual cooling
in air
Pre-heating in air
Soldering
260
230
200
150
100
0
60-120 sec.
40 sec. max.
Time
(Melting zone)
4
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
and stress after mounting onto PCB to prevent
contact intermittence.
driver slot.
* Recommended screwdriver for manual adjustment
TORAY INDUSTRIES, INC. : SA-2225
(Murata P/N : KMDR070)
3. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
* Recommended screwdriver bit for automatic
adjustment
TORAY INDUSTRIES, INC. : JB-2225
(Mutata P/N : KMBT070)
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
27
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
SMD Sealed Type 4mm Size PVM4 Series
2.0±0.2
4.0
#2
1.5 Dia.
3.8 Dia.
0.7
■ Features
1. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
2. Available for flow and reflow soldering method
while maintaining unique sealed construction.
3. Simple construction by 3-piece parts achieves high
reliability.
#1
#3
0.55±0.1
0.35±0.1 Depth
0.75
1.7
0.6
#2
#1
#3
4. Large diameter slot of rotor improves driver
insertion.
CLOCKWISE
5. Available for cleaning after soldering
6. High grade version is available (PVM4AxxxD01).
7. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
in mm
Tolerance : ±0.3
1.8
0.85
0.85
(
)
■ Applications
1. Security
2. OA, FA equipments
3. Measuring equipments 4. Professional cameras
5. Encorders
6. Sensors
5
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVM4A101C01
PVM4A201C01
PVM4A301C01
PVM4A501C01
PVM4A102C01
PVM4A202C01
PVM4A302C01
PVM4A502C01
PVM4A103C01
PVM4A203C01
PVM4A303C01
PVM4A503C01
PVM4A104C01
PVM4A204C01
PVM4A304C01
PVM4A504C01
PVM4A105C01
PVM4A205C01
PVM4A101D01
PVM4A201D01
PVM4A301D01
PVM4A501D01
PVM4A102D01
PVM4A202D01
PVM4A302D01
PVM4A502D01
PVM4A103D01
PVM4A203D01
PVM4A303D01
PVM4A503D01
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
0.1W(70°C)
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
100ohm ±25%
200ohm ±25%
300ohm ±25%
500ohm ±25%
1k ohm ±25%
2k ohm ±25%
3k ohm ±25%
5k ohm ±25%
10k ohm ±25%
20k ohm ±25%
30k ohm ±25%
50k ohm ±25%
100k ohm ±25%
200k ohm ±25%
300k ohm ±25%
500k ohm ±25%
1M ohm ±25%
2M ohm ±25%
100ohm ±20%
200ohm ±20%
300ohm ±20%
500ohm ±20%
1k ohm ±20%
2k ohm ±20%
3k ohm ±20%
5k ohm ±20%
10k ohm ±20%
20k ohm ±20%
30k ohm ±20%
50k ohm ±20%
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±250ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±200ppm/°C
±200ppm/°C
±200ppm/°C
±200ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
Continued on the following page.
28
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVM4A104D01
PVM4A204D01
PVM4A304D01
PVM4A504D01
PVM4A105D01
PVM4A205D01
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
0.25W(70°C) Flow/Reflow/Soldering Iron
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
100k ohm ±20%
200k ohm ±20%
300k ohm ±20%
500k ohm ±20%
1M ohm ±20%
2M ohm ±20%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
The last three digits express the individual specification codes. C01 for standard type and D01 for high-liability type.
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PVM4A101A01
PVM4A201A01
PVM4A301A01
PVM4A501A01
PVM4A102A01
PVM4A202A01
PVM4A302A01
PVM4A502A01
PVM4A103A01
PVM4A203A01
PVM4A303A01
PVM4A503A01
PVM4A104A01
PVM4A204A01
PVM4A304A01
PVM4A504A01
PVM4A105A01
PVM4A205A01
PVM4A101B01
PVM4A201B01
PVM4A301B01
PVM4A501B01
PVM4A102B01
PVM4A202B01
PVM4A302B01
PVM4A502B01
PVM4A103B01
PVM4A203B01
PVM4A303B01
PVM4A503B01
PVM4A104B01
PVM4A204B01
PVM4A304B01
PVM4A504B01
PVM4A105B01
PVM4A205B01
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
Flow/Reflow/Soldering Iron
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
100 ohm±25%
200 ohm±25%
300 ohm±25%
500 ohm±25%
1k ohm±25%
2k ohm±25%
3k ohm±25%
5k ohm±25%
10k ohm±25%
20k ohm±25%
30k ohm±25%
50k ohm±25%
100k ohm±25%
200k ohm±25%
300k ohm±25%
500k ohm±25%
1M ohm±25%
2M ohm±25%
100 ohm±20%
200 ohm±20%
300 ohm±20%
500 ohm±20%
1k ohm±20%
2k ohm±20%
3k ohm±20%
5k ohm±20%
10k ohm±20%
20k ohm±20%
30k ohm±20%
50k ohm±20%
100k ohm±20%
200k ohm±20%
300k ohm±20%
500k ohm±20%
1M ohm±20%
2M ohm±20%
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±250
±150
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±150
±150
±150
±150
±150
±150
Non Standard
Product
(Cd Free)
Non Standard
Product
(Cd included)
5
Non Standard
Product
(Cd Free)
Non Standard
Product
(Cd included)
Continued on the following page.
29
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Construction
■ Standard Land Pattern
1.7
Rotor
#2 Terminal
Wiper
Rubber
Ceramic
Substrate
#1 Terminal
Resistive
Element
in mm
Tolerance : ±0.1
1.1
1.6
1.1
(
)
#3 Terminal
■ Characteristics
Item
PVM4ApppC01
Res. Change : ±3%
PVM4ApppD01
Res. Change : ±2%
Res. Change : ±2%
Res. Change : ±3%
Res. Change : ±3%
Res. Change : ±2%
Humidity Exposure
High Temperature Exposure
Humidity Load Life
Temperature Load Life
Temperature Cycle
Rotational Life
Res. Change : ±3%
Res. Change : ±3%
Res. Change : ±3%
Res. Change : ±3%
Res. Change : ±10% (20 cycles)
Res. Change : ±5% (100 cycles)
5
30
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVM4 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
5
■ Notice (Soldering and Mounting)
1. Soldering
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
(1) Can be soldered by reflow soldering method, flow
soldering method, and soldering iron. (In case
of flow soldering, it is necessary to clean
after soldering.)
(5) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
2. Mounting
(1) Do not apply excessive force (preferably 9.8N
(Ref.; 1kgf) max.), when the trimmer
potentiometer is mounted to the PCB.
(2) Do not warp and/or bend PC board to prevent
trimmer potentiometer from breakage.
(3) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 4.0mm dia. and inner dimension 2.0mm
dia.
(3) Standard soldering condition
(a) Reflow and flow soldering :
Refer to the standard temperature profile.
(b) Soldering iron:
>Temperature of tip 400 deg.C max.
>Soldering time
>Diameter
5 sec. max.
2mm dia. max.
40W max.
>Wattage of iron
Before using other soldering conditions than
those listed above, please consult with a Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
3. Cleaning
(1) Isopropyl alcohol and Ethyl alcohol are
available materials for cleaning.
For other materials, please consult with a Murata
factory representative prior to using.
(2) The following are the recommended cleaning
conditions for the potentiometer. If this part
is cleanied under any other conditions than
these listed below, the sealing construction may
be damaged.
(4) Apply the appropriate amount of solder paste.
The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the
dimension of land pattern used should be Murata's
standard land pattern at reflow soldering.
(Condition)
Type1: Cold dipping/Max. 5 min.
Continued on the following page.
31
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVM4 Series Notice
Continued from the preceding page.
Type2: Hot dipping/Max. 2 min.
Type3: Ultra-sonic washing/Max. 1 min.
(20W/litre or below)
Due to ultra-sonic cleaning equipment's peculiar
self-resonance point and that cleaning compatibility
usually depends on the jig construction and/or the
cleaning condition such as the depth of immersion,
please check the cleaning equipment to determine
the suitable conditions.
Type4: Hot dipping/Max. 1 min.+
Ultra-sonic washing/Max.1 min.
(20W/litre or below)
Type5: Hot dipping/Max. 1 min.+
Ultra-sonic washing/Max. 30 sec.+
(20W/litre or below)/(Preferably max. 30 sec.)
Vapor/Max.30 sec.
If the condition is not suitable, the trimmer
potentiometer may deviate from specified
characteristics.
■ Flow Soldering Standard Profile
■ Reflow Soldering Standard Profile
Gradual Cooling
(in the air)
Gradual Cooling
(in the air)
Pre-heating(in the air)
Soldering
Pre-heating(in the air)
Soldering
260
260
200
180
200
150
100
150
100
0
0
Time
60 to 120 sec.
10 sec. max.
60 to 120 sec.
30 to 50 sec.
Time
5
150 to 180°C
(Melting zone)
(Melting zone)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
applied, the trimmer potentiometer may not
function.
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
VESSEL MFG.: NO. 9000-2.6x30
3. Please use within the effective rotational angle.
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
(Murata P/N : KMDR120)
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
32
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
SMD Sealed Type Multi-turns PVG5/PV01 Series
PVG5 Series
■ Features
ADJ. Slot
DIA 1.5
Width 0.6
Depth 0.5
1. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
2. Available with reflow soldering method
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. Both Top and side adjustment directions
6. Ultra smaller volume (1/5-1/2) than leaded multi-turn
5.0
0.2
3-0.7
#1
2.4
1.2
3-0.8
#2
#3
2.5
Schematic
#2
potentiometer.
PVG5A
#1
#3
7. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
CLOCKWISE
in mm
Tolerance : ±0.3
(
)
ADJ.Slot
■ Applications
1. Measuring instruments 2. OA equipment
DIA 1.5
Width 0.6
Depth 0.5
2.4
4.9
1.2
3. Madical equipment
5. Sensors
4. Power supply
6. Base station for cellular phone
3-0.7
3-0.9
#3
Schematic
#2
#2
#1
PVG5H
#1
#3
CLOCKWISE
in mm
Tolerance : ±0.3
(
)
6
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVG5p100C01
PVG5p200C01
PVG5p500C01
PVG5p101C01
PVG5p201C01
PVG5p501C01
PVG5p102C01
PVG5p202C01
PVG5p502C01
PVG5p103C01
PVG5p203C01
PVG5p503C01
PVG5p104C01
PVG5p204C01
PVG5p504C01
PVG5p105C01
PVG5p205C01
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
0.25W(70°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
10ohm ±10%
20ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
The blank column is filled with the code of adjustment direction A (top) or H (side).
33
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PVG5p100A01
PVG5p200A01
PVG5p500A01
PVG5p101A01
PVG5p201A01
PVG5p501A01
PVG5p102A01
PVG5p202A01
PVG5p502A01
PVG5p103A01
PVG5p203A01
PVG5p503A01
PVG5p104A01
PVG5p204A01
PVG5p504A01
PVG5p105A01
PVG5p205A01
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±200
±200
±200
±200
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Adjustment Screw
Case
Gear
#2 Terminal
Wiper
Resistive Element
Ceramic Substrate
#1, #3 Terminal
6
■ Standard Land Pattern
PVG5A
1.3
PVG5H
1.3
1.3
1.2
1.3
1.3
1.0
1.3
in mm
Tolerance : ±0.1
in mm
)
(
)
(
Tolerance : ±0.1
Continued on the following page.
34
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
10Mohm min.
±1%
∆TR
Vibration
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3% or 3ohm max.,
whichever is greater
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±3% or 3ohm max.,
Shock
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (100 cycles)
whichever is greater
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
6
35
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV01 Series
6.4
1.2
■ Features
1. Small size (6.35x6.35x4.3mm)
1.8±0.2 DIA
0.6±0.2
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available with reflow soldering method
4. Available for ultrasonic cleaning after soldering
5. Clutch mechanism prevents excessive wiper rotation.
6. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
#2
3−0.4±0.1 Dia.
#3
#1
2.5
2.5
#2
PV01P
PV01W
PV01X
#1
#3
in mm
Tolerance : ±0.3
Clockwise
(
)
■ Applications
1. Measuring instruments 2. FAX
6.4
1.2
#2
3. PPCs
4. Printers
5. Sensors
3−0.4±0.1 Dia.
#1
2.5
#3
2.5
1.8±0.2 Dia.
0.6±0.2
3−1.0
#2
#1
#3
in mm
Tolerance : ±0.3
(
)
Clockwise
6.4
#2
3−0.4±0.1 Dia.
#3
2.5
#1
2.5
1.1
6
0.6
1.0
3−1.0
#2
#1
#3
in mm
Tolerance : ±0.3
Clockwise
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV01p100C01
PV01p200C01
PV01p500C01
PV01p101C01
PV01p201C01
PV01p501C01
PV01p102C01
PV01p202C01
PV01p502C01
PV01p103C01
PV01p203C01
PV01p253C01
PV01p503C01
PV01p104C01
PV01p204C01
PV01p254C01
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
Reflow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10ohm ±10%
20ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
Continued on the following page.
36
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV01p504C01
PV01p105C01
0.25W(85°C)
0.25W(85°C)
Reflow/Soldering Iron
Reflow/Soldering Iron
12
12
500k ohm ±10%
1M ohm ±10%
±150ppm/°C
±150ppm/°C
The blank column is filled with the code of adjustment direction P (side), W (top) or X (side).
Magazine packaging is standard for PV01 series.
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV01p100A01
PV01p200A01
PV01p500A01
PV01p101A01
PV01p201A01
PV01p501A01
PV01p102A01
PV01p202A01
PV01p502A01
PV01p103A01
PV01p203A01
PV01p253A01
PV01p503A01
PV01p104A01
PV01p204A01
PV01p254A01
PV01p504A01
PV01p105A01
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
Refrow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Gear
Case
6
Terminal
Adjustment Screw
Wiper
Cermet Resistive
Element
Alumina Substrate
■ Standard Land Pattern
PV01P
PV01W/PV01X
1.6
1.6
1.6
3.4
1.6
1.6
3.4
1.6
in mm
)
in mm
Tolerance : ±0.1
(
(
)
Tolerance : ±0.1
Continued on the following page.
37
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Characteristics
∆TR
±1%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR RV100ohm ±3%
Shock (100G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
...
...
RG100ohm ±2%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR
R
: Insulation Resistance
: Standard Total Resistance
6
38
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVG5/PV01 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
■ Notice (Soldering and Mounting)
1. Soldering
surface tension of the solder. Insufficient land
area leads to insufficient soldering strength of
the chip.
(1) Standard soldering condition
(a) Reflow and flow soldering:
Refer to the standard temperature profile.
(b) Soldering iron:
(2) Do not apply excessive force (preferably 9.8N
(Ref.; 1kgf) max.), when the trimmer
potentiometer is mounted to the PCB.
(3) Do not warp and/or bend PC board to prevent
trimmer potentiometer from breakage.
(4) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 4.0mm dia. and inner dimension 2.0mm
dia.
6
>Temperature of tip 260 deg.C max.
>Soldering time
>Diameter
3 sec. max.
2mm dia. max.
30W max.
>Wattage of iron
Before using other soldering conditions than
those listed above, please consult with a Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer capacitor may deviate from the
specified characteristics.
3. Cleaning
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please consult with a
Murata factory representative prior to using.
(2) The total cleaning time by cold dipping, vapor
and ultrasonic washing (conditions as below)
method should be less than 3 minutes.
(3) For ultra-sonic cleaning, the available
condition is as follows.
(2) Cannot be soldered using the flow soldering
method. If you use the flow soldering method,
the trimmer potentiometer may not function.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
>Power: 600W (67 liter) max.
(4) Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
>Frequency: 28kHz
>Temperature: Ambient temperature
Due to the ultra-sonic cleaning equipment's
peculiar self-resonance point and that the
cleaning compatibility usually depends on the jig
construction and/or the cleaning condition such
as the depth of immersion, please check the
Continued on the following page.
2. Mounting
(1) Use our standard land dimension. Excessive land
area causes displacement due to the effect of the
39
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVG5/PV01 Series Notice
Continued from the preceding page.
cleaning equipment to determine the suitable
conditions.
conditions, the trimmer potentiometer may be
damaged.
If the trimmer potentiometer is cleaned by other
■ Reflow Soldering Standard Profile
For reflow soldering
Gradual Cooling
(in the air)
Pre-heating (in the air)
Soldering
230
200
100
0
60-120 sec.
30 sec. max.
Time
(Melting zone)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot. We recommend the screwdrivers below.
* Recommended screwdrivers for manual adjustment
<PVG5 series>
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
VESSEL MFG. : NO.9000-1.3x30
(Murata P/N : KMDR130)
3. When adjusting with a screwdriver, do not apply
excessive force (preferable 4.9N (Ref; 500gf) max.)
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
<PV01 series>
ENGINEER INC. : DA-40
(Murata P/N : KMDR180)
We can supply the screwdrivers above.
If you place order, please specify Murata P/N.
6
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
40
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
Lead Sealed Type Single-turn PVC6/PV32/PV34 Series
PVC6 Series
6.9
0.55W×3.2L×1.3D
■ Features
1. Enlarged and colored rotor provides superior
adjustability.
3.2 Dia.
2. Cone-shaped rotor improves driver insertion during
automatic adjustment.
3-0.5 Dia.
3. Available for "Zero" plus adjustment tool (taper
head) use
#3
2.5
#2
4. Easy to see 11-scales adjustment positions.
#2
#1
#3
5. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
6. Available for ultrasonic cleaning after soldering
7. During cutting process by the inserter machine, the
round shaped lead wire prevents clinch problems
and realizes longer life of cutter than flat shaped
lead wire.
PVC6A
PVC6D
PVC6E
PVC6H
CLOCKWISE
in mm
Tolerance : ±0.3
#1
(
)
6.9
0.55W×3.2L×1.3D
8. Flammability: UL94V-0
3.2 Dia.
9. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
3-0.5 Dia.
#3
#1
2.5
#2
■ Applications
#2
#1
CLOCKWISE
#3
1. DY
2. CRT display
4. Professional cameras
6. FAX
in mm
Tolerance : ±0.3
3. Power supply
5. CATV
(
)
7. Printers
9. Sensors
8. OA Equipment
0.55W×3.2L×1.3D
6.9
6.5
3.2 Dia.
7
3-0.5 Dia.
#1 #2 #3
2.5
2.5
6.0
#2
#1
CLOCKWISE
#3
in mm
Tolerance : ±0.3
(
)
0.55W×3.2L×1.3D
6.9
6.9
6.5
0.55W×3.2L×1.3D
3.2 Dia.
3.2 Dia.
3-0.5 Dia.
3-0.5 Dia.
#1 #2 #3
2.5
#3
2.5
6.0
#2
#2
#2
#1
#3
#1
CLOCKWISE
#3
CLOCKWISE
PVC6M
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
#1
(
)
(
)
Continued on the following page.
41
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
0.55W×3.2L×1.3D
6.9
0.55W×3.2L×1.3D
6.5
6.9
6.5
3.2 Dia.
3.2 Dia.
3-0.5 Dia.
3-0.5 Dia.
#1 #2 #3
#3 #2 #1
2.5
2.5
6.0
#3
6.0
#2
2.5
2.5
#2
#1
#1
CLOCKWISE
#3
PVC6G
PVC6Q
CLOCKWISE
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
(
)
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVC6p100C01
PVC6p200C01
PVC6p250C01
PVC6p500C01
PVC6p101C01
PVC6p201C01
PVC6p251C01
PVC6p501C01
PVC6p102C01
PVC6p202C01
PVC6p252C01
PVC6p502C01
PVC6p103C01
PVC6p203C01
PVC6p253C01
PVC6p503C01
PVC6p104C01
PVC6p204C01
PVC6p254C01
PVC6p504C01
PVC6p105C01
PVC6p205C01
PVC6p505C01
PVC6p100C04
PVC6p200C04
PVC6p250C04
PVC6p500C04
PVC6p101C04
PVC6p201C04
PVC6p251C04
PVC6p501C04
PVC6p102C04
PVC6p202C04
PVC6p252C04
PVC6p502C04
PVC6p103C04
PVC6p203C04
PVC6p253C04
PVC6p503C04
PVC6p104C04
PVC6p204C04
PVC6p254C04
PVC6p504C04
PVC6p105C04
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
10ohm ±10%
20ohm ±10%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
25ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
250ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
2.5k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
5M ohm ±10%
10ohm ±10%
7
20ohm ±10%
25ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
250ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
2.5k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
Continued on the following page.
42
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PVC6p205C04
PVC6p505C04
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
1(240°±5°)
1(240°±5°)
2M ohm ±10%
5M ohm ±10%
±100ppm/°C
±100ppm/°C
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (A, D, E, G, H, M and Q).
The order quantity should be an integral multiple of the "Minimum Quantity" .
The last three digits express the individual specification codes. C01 for standard type and C04 for radial taping type (PVC6M/PVC6Q series only).
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PVC6p100A01
PVC6p200A01
PVC6p250A01
PVC6p500A01
PVC6p101A01
PVC6p201A01
PVC6p251A01
PVC6p501A01
PVC6p102A01
PVC6p202A01
PVC6p252A01
PVC6p502A01
PVC6p103A01
PVC6p203A01
PVC6p253A01
PVC6p503A01
PVC6p104A01
PVC6p204A01
PVC6p254A01
PVC6p504A01
PVC6p105A01
PVC6p205A01
PVC6p505A01
PVC6p100A04
PVC6p200A04
PVC6p250A04
PVC6p500A04
PVC6p101A04
PVC6p201A04
PVC6p251A04
PVC6p501A04
PVC6p102A04
PVC6p202A04
PVC6p252A04
PVC6p502A04
PVC6p103A04
PVC6p203A04
PVC6p253A04
PVC6p503A04
PVC6p104A04
PVC6p204A04
PVC6p254A04
PVC6p504A04
PVC6p105A04
PVC6p205A04
PVC6p505A04
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
1(240°±5°)
10 ohm±10%
20 ohm±10%
25 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
250 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
2.5k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
5M ohm±10%
10 ohm±10%
20 ohm±10%
25 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
250 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
2.5k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
5M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd Free)
Non Standard
Product
(Cd included)
Non Standard
Product
7
(Cd Free)
Non Standard
Product
(Cd included)
Continued on the following page.
43
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Construction
Rotor
Cover
"O"-Ring
Ceramic
Substrate
Wiper
Case
Terminal
■ Mounting Holes
PVC6A/PVC6E
PVC6D/PVC6H
2.5
2.5
(2)
(3)
(1)
(3)
(1)
2.5
2.5
(2)
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
PVC6M/PVC6Q
PVC6G
2.5
2.5
(1)
(2)
(3)
(3)
(1)
7
2.5
2.5
(2)
Tolerance ±0.1
Tolerance:±0.1
in mm
in mm
Continued on the following page.
44
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Characteristics
∆TR
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
±2%
Temperature Cycle
Humidity
IR
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±2%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Shock (100G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±4%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
7
45
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV32 Series
0.6
1.0 Depth
■ Features
1. 6 standard terminal styles
6.6±0.5 Dia.
2. Round shaped body enables smaller area mount than
same 6mm square potentiometer.
3. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
4. Available for ultrasonic cleaning after soldering
5. Flammability : UL94V-0
0.85 Dia. max.
3−0.5±0.1 Dia.
#1#2 #3
#2
90°±6°
#1
CLOCKWISE
#3
PV32H
PV32R
PV32N
PV32T
■ Applications
1. HDTVs
in mm
Tolerance : ±0.3
(
)
2. Professional cameras
4. FAX
3. CATV
0.6
1.0 Depth
5. Printers
7. Power supply
6. Sensors
6.6±0.5 Dia.
3−0.5±0.1 Dia.
#1 #2 #3
#2
#1
CLOCKWISE
#3
2.5
2.5
in mm
Tolerance : ±0.3
(
)
0.6
1.0 Depth
6.4±0.4
5.9±0.4
6.9
0.6
1.0 Depth
6.6±0.5 DIA.
3−0.5±0.1 Dia.
#3 #2 #1
3−0.5±0.1 DIA.
5.0
#2
#1 #2 #3
#2
#1
CLOCKWISE
#3
#1
#3
CLOCKWISE
(
PV32P
2.5 2.5
2.5
2.5
in mm
in mm
Tolerance : ±0.3
(
)
)
7
Tolerance : ±0.3
6.4±0.4
5.9±0.4
6.4±0.4
6.9
0.6
6.9
5.9±0.4
0.6
1.0 Depth
1.0 Depth
3−0.5±0.1 Dia.
3−0.5±0.1 Dia.
#1 #2 #3
#1 #2 #3
5.0
#2
5.0
#2
#1
#3
#1
#3
CLOCKWISE
CLOCKWISE
PV32S
2.5 2.5
2.5 2.5
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
(
)
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV32p100A01
PV32p200A01
PV32p250A01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
1(230°±5°)
1(230°±5°)
1(230°±5°)
10ohm ±20%
20ohm ±20%
25ohm ±20%
±100ppm/°C
±100ppm/°C
±100ppm/°C
Continued on the following page.
46
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV32p500A01
PV32p101A01
PV32p201A01
PV32p251A01
PV32p501A01
PV32p102A01
PV32p202A01
PV32p252A01
PV32p502A01
PV32p103A01
PV32p203A01
PV32p253A01
PV32p503A01
PV32p104A01
PV32p204A01
PV32p254A01
PV32p504A01
PV32p105A01
PV32p205A01
PV32p505A01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
1(230°±5°)
50ohm ±20%
100ohm ±20%
200ohm ±20%
250ohm ±20%
500ohm ±20%
1k ohm ±20%
2k ohm ±20%
2.5k ohm ±20%
5k ohm ±20%
10k ohm ±20%
20k ohm ±20%
25k ohm ±20%
50k ohm ±20%
100k ohm ±20%
200k ohm ±20%
250k ohm ±20%
500k ohm ±20%
1M ohm ±20%
2M ohm ±20%
5M ohm ±20%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (H, P, R, N, S and T).
The order quantity should be an integral multiple of the "Minimum Quantity".
■ Construction
Rotor
Cover
"O"-Ring
Wiper
Resistive
Element
Ceramic
Substrate
Terminal
7
■ Mounting Holes
PV32H
PV32R
(1)
(2)
(3)
(2)
2.5
2.5
(1)
(3)
Tolerance:±0.1
Tolerance:±0.1
in mm
in mm
Continued on the following page.
47
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Mounting Holes
PV32P/PV32S
PV32N
2.5
2.5
(2)
(3)
(1)
(3)
(1)
2.5
2.5
(2)
Tolerance ±0.1
in mm
Tolerance:±0.1
in mm
PV32T
2.5
2.5
(1)
(3)
(2)
Tolerance:±0.1
in mm
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±2%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
7
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±4%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
48
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV34 Series
9.6
5.5±0.5
4.9
0.3
■ Features
1. 5 standard terminal styles
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Flammability : UL94V-0
2.5 2.5
#1
#3
5. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
#2
#1
#3
CLOCKWISE
#2
PV34F
PV34H
PV34P
PV34X
in mm
(
)
Tolerance : ±0.3
■ Applications
1. HDTVs
2. Professional cameras
4. Printers
9.6
3. CATV
4.9
5. Sensors
6. Switching power supplies
3−0.5±0.1 DIA.
#1
#2 #3
#2
#1
CLOCKWISE
#3
2.5 2.5
in mm
(
(
Tolerance ±0.3
9.6
5.5±0.5
4.9
0.3
2.5 2.5
#2
#1
#3
#1
#3
CLOCKWISE
in mm
(
)
#2
Tolerance : ±0.3
7
9.6
9.6
4.9
4.9
3−0.5±0.1 Dia.
3−0.5±0.1 Dia.
#1
#2 #3
#1
#3 #2
#2
#2
#1
CLOCKWISE
#3
#1
#3
CLOCKWISE
PV34W
2.5 2.5
2.5 2.5
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
(
)
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV34p100C01
PV34p200C01
PV34p500C01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
1(280°±15°)
1(280°±15°)
1(280°±15°)
10ohm ±10%
20ohm ±10%
50ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
Continued on the following page.
49
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV34p101C01
PV34p201C01
PV34p501C01
PV34p102C01
PV34p202C01
PV34p502C01
PV34p103C01
PV34p203C01
PV34p253C01
PV34p503C01
PV34p104C01
PV34p204C01
PV34p254C01
PV34p504C01
PV34p105C01
PV34p205C01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
±150ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (F, H, P, X and W).
The order quantity should be an integral multiple of the "Minimum Quantity".
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV34p100A01
PV34p200A01
PV34p500A01
PV34p101A01
PV34p201A01
PV34p501A01
PV34p102A01
PV34p202A01
PV34p502A01
PV34p103A01
PV34p203A01
PV34p253A01
PV34p503A01
PV34p104A01
PV34p204A01
PV34p254A01
PV34p504A01
PV34p105A01
PV34p205A01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
1(280°±15°)
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
7
■ Construction
Case
Rotor
"O"-Ring
Alumina Substrate
Terminal
Wiper
Cermet Resistive
Element
50
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Mounting Holes
PV34F
PV34H/PV34P
2.5
2.5
2.5
2.5
(1)
(3)
(1)
(3)
(2)
(2)
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
PV34W
PV34X
2.5
2.5
(1)
(2)
(3)
(3)
(1)
2.5
2.5
(2)
Tolerance ±0.1
Tolerance:±0.1
in mm
in mm
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±2%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR RV100kohm ... ±3%
7
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
RG100kohm ... ±5%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR
R
: Insulation Resistance
: Standard Total Resistance
51
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVC6/PV32/PV34 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
■ Notice (Soldering and Mounting)
1. Soldering
trimmer potentimeter may be damaged by
mechanical stress.
(1) Standard soldering condition
(a) Flow soldering :
(2) Do not apply excessive force (preferably 9.8N
(Ref.; 1kgf) max.), when the trimmer
potentiometer is mounted to the PCB.
3. Cleaning
>Pre-heating temp. 80-100 deg. C
>Soldering temp.
>Soldering time
260 deg. C max.
3 sec. max.
(b) Soldering iron :
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please consult with a
Murata factory representative prior to using.
(2) The total cleaning time by cold dipping, vapor
and ultrasonic washing (conditions as below)
method should be less than 3 minutes.
(3) For ultra-sonic cleaning, the available
condition is as follows.
>Temperature of tip 300 deg. C max.
>Soldering time
>Wattage of iron
3 sec. max.
40W max.
7
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
>Power: 600W (67 liter) max.
>Frequency: 28kHz
(2) To minimize mechanical stress when adjusting,
the trimmer potentiometer should be mounted onto
PCB without gap.
>Temperature: Ambient temperature
Due to the ultra-sonic cleaning equipment's
peculiar self-resonance point and that the
cleaning compatibility usually depends on the jig
construction and/or the cleaning condition such
as the depth of immersion, please check the
cleaning equipment to determine the suitable
conditions.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
2. Mounting
(1) Use PCB hole to meet the pin of the trimmer
potentiometer. If the trimmer potentiometer
installs into insufficient PCB hole, the
If the trimmer potentiometer is cleaned by
other conditions, the trimmer potentiometer may
be damaged.
52
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVC6/PV32/PV34 Series Notice
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
<PVC6 series>
If you place an order, please specify the
Murata P/N.
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
VESSEL MFG. : NO.9000+0x30
(Murata P/N : KMDR150)
TORAY INDUSTRIES, INC. : SA-2225
(Murata P/N : KMDR070)
3. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
<PV32/34 series>
ENGINEER INC. : DA-40
(Murata P/N : KMDR180)
* Recommended screwdriver bit for automatic
adjustment
4. The rotational torque at the position of the
adjustment range should not exceed the stop
strength.
<PVC6 series>
VESSEL MFG. : NO.CA-10
(Murata P/N : KMBT090)
5. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
TORAY INDUSTRIES, INC. : JB-2225
(Murata P/N : KMBT070)
We can supply the screwdrivers avobe.
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
7
53
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series
PV12 Series
0.6±0.1
6.6±0.1
7.0±1.0
0.7±0.1 Depth
■ Features
1. The unique inner gear system recognizes the
position of the center of the shaft of the
potentiometer.
0.5
#2
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
#2
#3
#1
#1
#3
4. Clutch mechanism prevents excessive wiper rotation.
CLOCKWISE
90°±6°
PV12H
PV12P
PV12T
in mm
Tolerance : ±0.3
■ Applications
1. HDTVs
(
)
2. Professional cameras
4. FAX
3. CATV
5. Printers
6. Sensors
0.6±0.1
7.0±1.0
6.6±0.1
0.7±0.1 Depth
7. Switching power supplies
0.5
2.5 2.5
#2
#2
#1
#3
#3
#1
CLOCKWISE
in mm
Tolerance : ±0.3
(
)
7.7±0.3
0.6±0.1
7.7±0.3
0.6±0.1
0.7±0.1 Depth
0.7±0.1 Depth
3−0.5±0.1 Dia.
3−0.5±0.1 Dia.
#1
#2 #3
7.6±0.3
#1
#2 #3
7.6±0.3
6.3±0.3
6.3±0.3
#2
#2
#1
#3
#1
CLOCKWISE
#3
CLOCKWISE
PV12S
in mm
Tolerance : ±0.3
in mm
)
(
)
(
2.5
2.5
2.5
2.5
Tolerance : ±0.3
8
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV12p100A01
PV12p200A01
PV12p500A01
PV12p101A01
PV12p201A01
PV12p501A01
PV12p102A01
PV12p202A01
PV12p502A01
PV12p103A01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
4
4
4
4
4
4
4
4
4
4
10ohm ±10%
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
Continued on the following page.
54
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV12p203A01
PV12p503A01
PV12p104A01
PV12p204A01
PV12p504A01
PV12p105A01
PV12p205A01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
4
4
4
4
4
4
4
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (H, P, T and S).
The order quantity should be an integral multiple of the "Minimum Quantity".
■ Construction
Shaft
Case
"O"-Ring
Gear
Rotor
Insert
Wiper
Ceramic Resistive
Element
Alumina Substrate
Terminal
■ Mounting Holes
PV12H
PV12P/PV12S
(2)
(3)
(1)
(2)
2.5
2.5
(1)
(3)
Tolerance:±0.1
Tolerance:±0.1
in mm
in mm
8
PV12T
2.5
2.5
(1)
(3)
(2)
Tolerance:±0.1
in mm
55
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±2%
∆TR ±3%
∆V.S.S. ±1.5%
∆TR ±3%
∆V.S.S. ±1.5%
Shock (100G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
56
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV37 Series
0.6
1.0
Marking
1.2
■ Features
1. Smaller volume (about one-third) than 25-turns
potentiometer
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. 5 standard terminal styles
3−0.4±0.1 Dia.
#1 #2
6.4
#3
#2
#1
CLOCKWISE
#3
6. Both Top and side adjustment directions
7. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
PV37P
PV37W
PV37X
PV37Z
in mm
Tolerance : ±0.3
2.5 2.5
(
)
1.1
6.4
1.8±0.2 Dia.
0.6±0.2
1.2
■ Applications
1. Measuring instruments 2. OA equipment
Marking
3. Medical equipment
4. Power supply
5. Base station for cellular phone
3−0.4±0.1 Dia.
#3
#2
#1
#2
2.5 2.5
#1
CLOCKWISE
#3
in mm
Tolerance : ±0.3
(
)
6.4
0.6
1.0
Marking
1.1
3−0.4±0.1 Dia.
#3
#2
#1
2.5 2.5
#2
#1
CLOCKWISE
#3
in mm
Tolerance : ±0.3
(
)
1.1
0.6
1.0
6.4
6.4
Marking
1.8±0.2 Dia.
0.6±0.2
1.1
1.2
Marking
8
3−0.4±0.1 Dia.
3−0.4±0.1 Dia.
#3 #2
2.5 2.5
#1
#3 #2 #1
2.5 2.5
#2
#2
#1
CLOCKWISE
#3
#1
#3
PV37Y
CLOCKWISE
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
(
)
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV37p100C01
PV37p200C01
PV37p500C01
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
10ohm ±10%
20ohm ±10%
50ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
Continued on the following page.
57
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV37p101C01
PV37p201C01
PV37p501C01
PV37p102C01
PV37p202C01
PV37p502C01
PV37p103C01
PV37p203C01
PV37p253C01
PV37p503C01
PV37p104C01
PV37p204C01
PV37p254C01
PV37p504C01
PV37p105C01
PV37p205C01
PV37p100C31
PV37p200C31
PV37p500C31
PV37p101C31
PV37p201C31
PV37p501C31
PV37p102C31
PV37p202C31
PV37p502C31
PV37p103C31
PV37p203C31
PV37p253C31
PV37p503C31
PV37p104C31
PV37p204C31
PV37p254C31
PV37p504C31
PV37p105C31
PV37p205C31
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
0.25W(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
10ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).
The order quantity should be an integral multiple of the "Minimum Quantity".
The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV37Y/PV37Z series only).
8
58
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV37p100A01
PV37p200A01
PV37p500A01
PV37p101A01
PV37p201A01
PV37p501A01
PV37p102A01
PV37p202A01
PV37p502A01
PV37p103A01
PV37p203A01
PV37p253A01
PV37p503A01
PV37p104A01
PV37p204A01
PV37p254A01
PV37p504A01
PV37p105A01
PV37p205A01
PV37p100A31
PV37p200A31
PV37p500A31
PV37p101A31
PV37p201A31
PV37p501A31
PV37p102A31
PV37p202A31
PV37p502A31
PV37p103A31
PV37p203A31
PV37p253A31
PV37p503A31
PV37p104A31
PV37p204A31
PV37p254A31
PV37p504A31
PV37p105A31
PV37p205A31
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Gear
Case
8
Adjustment Screw
Terminal
Wiper
Cermet Resistive
Element
Alumina Substrate
59
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Mounting Holes
PV37P
PV37W/PV37X
2.5
2.5
2.5
2.5
(3)
(1)
(1)
(3)
(2)
(2)
Tolerance:±0.1
Tolerance ±0.1
in mm
in mm
PV37Y/PV37Z
(3)
(2)
(1)
2.5
2.5
Tolerance:±0.1
in mm
■ Characteristics
∆TR
±1%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR RV100ohm ... ±3%
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
8
RG100ohm ... ±2%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR
R
: Insulation Resistance
: Standard Total Resistance
60
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV23 Series
19.1
1.5
0.8
■ Features
4.6
1. Small size (4.6x6.4x19.1mm) and high power rating
(0.75W at 70deg.C)
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
3−0.5±0.1 Dia.
#1
#2
#3
#2
3.3
12.7
#1
#3
5.1
CLOCKWISE
PV23P
in mm
(
)
Tolerance : ±0.3
■ Applications
19.1
1. Measuring instruments 2. FAX
1.5
0.8
3. Copier
4. Printers
4.6
5. Sensors
3−0.5±0.1 Dia.
#1
#2
#3
#2
17.8
0.6
#1
CLOCKWISE
#3
7.6
PV23Y
in mm
Tolerance : ±0.3
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV23p100C01
PV23p200C01
PV23p500C01
PV23p101C01
PV23p201C01
PV23p501C01
PV23p102C01
PV23p202C01
PV23p502C01
PV23p103C01
PV23p203C01
PV23p503C01
PV23p104C01
PV23p204C01
PV23p504C01
PV23p105C01
PV23p205C01
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
0.75W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
10ohm ±10%
20ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
8
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P and Y).
The order quantity should be an integral multiple of the "Minimum Quantity".
61
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV23p100A01
PV23p200A01
PV23p500A01
PV23p101A01
PV23p201A01
PV23p501A01
PV23p102A01
PV23p202A01
PV23p502A01
PV23p103A01
PV23p203A01
PV23p503A01
PV23p104A01
PV23p204A01
PV23p504A01
PV23p105A01
PV23p205A01
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
0.75(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Post
Adjustment
Screw
Case
Terminal
Alumina Substrate
Wiper
Cermet
Resistive
Element
■ Mounting Holes
PV23P
PV23Y
12.7
17.8
7.6
5.1
(3)
(1)
(1)
(3)
(2)
(2)
8
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
62
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Shock (50G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
63
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV22 Series
31.8
3.2±0.2
25.4±0.2
■ Features
152 min.
5.0
1.7
1. High power rating (1W at 70 deg.C)
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
0.8±0.2
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
#2
#1(Yellow)
#2
#1
CLOCKWISE
#3
(Red)
PV22L
PV22S
PV22Y
#3(Green)
Insulated standard wire
in mm
Tolerance : ±0.3
(
)
■ Applications
1. Measuring instruments 2. FAX
31.8
3. Copier
4. Printers
3.2±0.2
25.4±0.2
5. Sensors
5.0
1.7
0.8±0.2
3−0.7±0.1 Dia.
#2 #1
#3
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
6.6
#2
#1
#3
CLOCKWISE
17.8
22.9
in mm
Tolerance : ±0.3
(
)
31.8
3.2±0.2
25.4±0.2
5.0
1.7
0.8±0.2
3−0.7±0.1 Dia.
#1
#2
#3
Mounting holes 2−2.5±0.2 Dia.
6.0
6.0
6.6
#2
#1
#3
CLOCKWISE
7.6
in mm
Tolerance : ±0.3
17.8
(
)
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV22p100C01
PV22p200C01
PV22p500C01
PV22p101C01
PV22p201C01
PV22p501C01
PV22p102C01
PV22p202C01
PV22p502C01
PV22p103C01
PV22p203C01
PV22p503C01
PV22p104C01
PV22p204C01
PV22p504C01
PV22p105C01
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
1.0W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
10ohm ±10%
20ohm ±10%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
8
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
500k ohm ±10%
1M ohm ±10%
Continued on the following page.
64
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV22p205C01
1.0W(70°C)
Flow/Soldering Iron
22
2M ohm ±10%
±100ppm/°C
Operating Temperature Range: -55 to 150 °C
The blank column is filled with the code of adjustment direction and lead type (L, S and Y).
The order quantity should be an integral multiple of the "Minimum Quantity".
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV22p100A01
PV22p200A01
PV22p500A01
PV22p101A01
PV22p201A01
PV22p501A01
PV22p102A01
PV22p202A01
PV22p502A01
PV22p103A01
PV22p203A01
PV22p503A01
PV22p104A01
PV22p204A01
PV22p504A01
PV22p105A01
PV22p205A01
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
1.0(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Adjustment
Screw
Post
Alumina
Substrate
Case
Cermet
Resistive
Element
Wiper
Terminal
■ Mounting Holes
PV22S
PV22Y
8
17.8
17.8
7.6
(2)
(1)
(3)
(3)
(1)
22.9
(2)
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
Continued on the following page.
65
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
±1%
∆TR
Vibration (20G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
Shock (50G)
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
∆TR
±2%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR : Insulation Resistance
8
66
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV36 Series
1.3
0.7
Marking
1.3
■ Features
1. High resolution 25-turns enables precision
adjustment easily.
3-0.5±0.1 Dia.
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering
4. Clutch mechanism prevents excessive wiper rotation.
5. 5 standard terminal styles
#1 #2 #3
9.6
#2 (Wiper)
#3
#1
6. Both Top and side adjustment directions.
7. To be complied with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
Clockwise
PV36P
PV36W
PV36X
PV36Z
(in mm)
(Tolerance : ±0.3)
2.5 2.5
1.2
9.6
1.3
2.0 Dia.
0.6
■ Applications
1. Measuring instruments 2. OA equipment
Marking
3. Medical equipment
4. Power supply
5. Base station for cellular phone
3-0.5±0.1 Dia.
#3 #2 #1
2.5 2.5
#2 (Wiper)
#1
#3
Clockwise
(in mm)
(Tolerance : ±0.3)
9.6
0.7
1.3
Marking
1.2
3-0.5±0.1 Dia.
#3 #2 #1
2.5 2.5
#2 (Wiper)
#3
#1
Clockwise
(in mm)
(Tolerance : ±0.3)
9.6
1.2
2.0 Dia.
9.6
1.3
0.7
1.3
Marking
1.2
0.6
Marking
8
3-0.5±0.1 Dia.
3-0.5±0.1 Dia.
#3 #2 #1
#3 #2 #1
2.5 2.5
#2 (Wiper)
#3
#2 (Wiper)
#1
#1
#3
Clockwise
PV36Y
Clockwise
(in mm)
(Tolerance : ±0.3)
(in mm)
(Tolerance : ±0.3)
2.5 2.5
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV36p100C01
PV36p200C01
PV36p500C01
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
10ohm ±10%
20ohm ±10%
50ohm ±10%
±150ppm/°C
±150ppm/°C
±150ppm/°C
Continued on the following page.
67
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
Number of Turns
(Effective Rotation Angle)
Part Number
Power Rating
Soldering Method
Total Resistance Value
TCR
PV36p101C01
PV36p201C01
PV36p501C01
PV36p102C01
PV36p202C01
PV36p502C01
PV36p103C01
PV36p203C01
PV36p253C01
PV36p503C01
PV36p104C01
PV36p204C01
PV36p254C01
PV36p504C01
PV36p105C01
PV36p205C01
PV36p100C31
PV36p200C31
PV36p500C31
PV36p101C31
PV36p201C31
PV36p501C31
PV36p102C31
PV36p202C31
PV36p502C31
PV36p103C31
PV36p203C31
PV36p253C31
PV36p503C31
PV36p104C31
PV36p204C31
PV36p254C31
PV36p504C31
PV36p105C31
PV36p205C31
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
0.5W(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
10ohm ±10%
±150ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±150ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
20ohm ±10%
50ohm ±10%
100ohm ±10%
200ohm ±10%
500ohm ±10%
1k ohm ±10%
2k ohm ±10%
5k ohm ±10%
10k ohm ±10%
20k ohm ±10%
25k ohm ±10%
50k ohm ±10%
100k ohm ±10%
200k ohm ±10%
250k ohm ±10%
500k ohm ±10%
1M ohm ±10%
2M ohm ±10%
Operating Temperature Range: -55 to 125 °C
The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).
The order quantity should be an integral multiple of the "Minimum Quantity".
The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV36W/PV36X series only).
8
68
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Soldering Method
Total Resistance Value
Remarks
PV36p100A01
PV36p200A01
PV36p500A01
PV36p101A01
PV36p201A01
PV36p501A01
PV36p102A01
PV36p202A01
PV36p502A01
PV36p103A01
PV36p203A01
PV36p253A01
PV36p503A01
PV36p104A01
PV36p204A01
PV36p254A01
PV36p504A01
PV36p105A01
PV36p205A01
PV36p100A31
PV36p200A31
PV36p500A31
PV36p101A31
PV36p201A31
PV36p501A31
PV36p102A31
PV36p202A31
PV36p502A31
PV36p103A31
PV36p203A31
PV36p253A31
PV36p503A31
PV36p104A31
PV36p204A31
PV36p254A31
PV36p504A31
PV36p105A31
PV36p205A31
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
Flow/Soldering Iron
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
10 ohm±10%
20 ohm±10%
50 ohm±10%
100 ohm±10%
200 ohm±10%
500 ohm±10%
1k ohm±10%
2k ohm±10%
5k ohm±10%
10k ohm±10%
20k ohm±10%
25k ohm±10%
50k ohm±10%
100k ohm±10%
200k ohm±10%
250k ohm±10%
500k ohm±10%
1M ohm±10%
2M ohm±10%
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Non Standard
Product
(Cd included)
■ Construction
Adjustment Screw
Terminal
8
Case
Wiper
Cermet Resistive Element
Gear
Alumina Substrate
69
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
■ Mounting Holes
PV36P
PV36W/X
2.5
2.5
(3)
(2)
(1)
(1)
(3)
(2)
2.5
2.5
Tolerance:±0.1
in mm
Tolerance:±0.1
in mm
PV36Y/Z
2.5
2.5
(3)
(1)
(2)
Tolerance ±0.1
in mm
■ Characteristics
∆TR
±2%
Temperature Cycle
∆V.S.S. ±1%
∆TR
IR
±2%
Humidity
100Mohm min.
∆TR
±1%
Vibration (20G)
Shock (100G)
∆V.S.S. ±1%
∆TR ±1%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR ±2%
∆V.S.S. ±1%
∆TR ±3%
∆V.S.S. ±1%
∆TR RV1kohm, RU500kohm ±5%
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life (200 cycles)
...
8
...
1kohmFRF500kohm ±3%
∆TR
: Total Resistance Change
∆V.S.S. : Voltage Setting Stability
IR
R
: Insulation Resistance
: Standard Total Resistance
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV12/PV37/PV23/PV22/PV36 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40 deg. C and
relative humidity of 30-85%RH.
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty / dirty atmosphere
6. If you use the trimmer potentiometer in an
environment other than listed below, please
consult with a Murata factory representative prior
to using.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
The trimmer potentiometer should not be used under
(7) Other variations of the above
■ Notice (Rating)
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P.R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. The maximum input current to a trimmer
potentiometer should not exceed (P/R)^1/2 or the
allowable wiper current, whichever is smaller.
■ Notice (Soldering and Mounting)
1. Soldering
trimmer potentimeter may be damaged by
mechanical stress.
(1) Standard soldering condition
(a) Flow soldering :
(2) Do not apply excessive force (preferably 9.8N
(Ref.; 1kgf) max.), when the trimmer
potentiometer is mounted to the PCB.
3. Cleaning
>Pre-heating temp. 80-100 deg. C
>Soldering temp.
>Soldering time
260 deg. C max.
3 sec. max.
(b) Soldering iron :
(1) Isopropyl-alcohol and Ethyl-alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please consult with a
Murata factory representative prior to using.
(2) The total cleaning time by cold dipping, vapor
and ultrasonic washing (conditions as below)
method should be less than 3 minutes.
(3) For ultra-sonic cleaning, the available
condition is as follows.
>Temperature of tip 300 deg. C max.
>Soldering time
>Wattage of iron
3 sec. max.
40W max.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
>Power: 600W (67 liter) max.
8
>Frequency: 28kHz
(2) To minimize mechanical stress when adjusting,
the trimmer potentiometer should be mounted onto
PCB without gap.
>Temperature: Ambient temperature
Due to the ultra-sonic cleaning equipment's
peculiar self-resonance point and that the
cleaning compatibility usually depends on the jig
construction and/or the cleaning condition such
as the depth of immersion, please check the
cleaning equipment to determine the suitable
conditions.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
2. Mounting
(1) Use PCB hole to meet the pin of the trimmer
potentiometer. If the trimmer potentiometer
installs into insufficient PCB hole, the
If the trimmer potentiometer is cleaned by
other conditions, the trimmer potentiometer may
be damaged.
71
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PV12/PV37/PV23/PV22/PV36 Series Notice
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
ENGINEER INC. : DA-40
applied, the trimmer potentiometer may not
function.
3. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
(Murata P/N : KMDR180)
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
4. When using a lock paint to fix slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
■ Notice (Other)
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
8
72
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Trimmer Potentiometers
Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series
0.6
2.1
C0.2 max.
#2
C0.15 max.
■ Features
0.5 rib
1.5±0.1
(D formation
thru-hole length)
1. Dust-proof construction protects the interior from
dust, which maintains stable characteristics.
2. Compliant to high peak temperature lead free
soldering.
2-R0.05rib
#1 #2 #3
11.0
+0.1
4.0
Dia.
-0
0.2
1.0
5.0
3. Excellent resistance materials and high reliability
wiper achieves 1M cycles.
4. D formation thru-hole rotor enables selection of
any kind of gear shape.
PVS1A
4-0.8±0.1
5.0
(in mm)
(Tolerance: ±0.3)
5. Leaded terminal type is available.
6. Ultra-thin size (2.1mm height)
7. Au plated terminals without Lead.
8.5±0.1
Mounting Face
2.9 3.5
#2
0.8
■ Applications
2.0
0.5 rib
1. Animal robot
1.5±0.1
(D formation
thru-hole length)
2. Switch for automotive
3. Motor drive unit
2-R0.05rib
+0.1
#1 #2 #3
4.0
Dia.
-0
11.0
5.0
4. Radio control equipment
5. Electric motor-driven bicycle
0.2
1.0
PVS1L
4-0.8±0.2
2.52.5
5.0
(in mm)
(Tolerance: ±0.3)
Total Resistance Value
(k ohm)
Linearity
(% )
Part Number
Effective Rotational Angle
333.3° (Ref.)
TCR
Rotational Life
1M cycles
PVS1A103A01
(SV01A103AEA01)
10 ±30%
10 ±30%
±2
±2
±500ppm/°C
±500ppm/°C
PVS1L103A03
(SV01L103AEA11)
333.3° (Ref.)
1M cycles
PVS1 series will be changed to new part number "SV01" since Oct. 1, 2004.
■ Construction
PVS1A
PVS1L
Rotor
Rotor
Cover
Cover
#2 Terminal
#2 Terminal
Resin Substrate
Resin Substrate
#3 Terminal
#3 Terminal
#2 Terminal
#1 Terminal
9
#2 Terminal
Wiper
Wiper
Resistive Element
Resistive Element
#1 Terminal
Continued on the following page.
73
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Continued from the preceding page.
■ Standard Land Pattern
■ Standard Mounting Holes
PVS1A
PVS1L
+0.1
4-1.0
Dia.
-0
(1.1)
2.5 2.5
5.0
4-1.8
5.0
(in mm)
(Tolerance : ±0.1)
(in mm)
(Tolerance: ±0.1)
(8.5)
■ Characteristics
Temperature Cycle
(Thermal Shock)
∆TR
Linearity ±3%
∆TR ±20%
Linearity ±3%
∆TR ±10%
Linearity ±3%
∆TR ±10%
Linearity ±3%
∆TR ±20%
Linearity ±3%
±20%
Humidity
Vibration
Shock (20G)
Humidity Load Life
∆TR
+5/-30%
High Temperature
Exposure
Linearity ±3%
∆TR
Linearity ±3%
∆TR ±20%
Linearity ±3%
∆TR: Total Resistance Change
±20%
Low Temperature
Exposure
Rotational Life
(1M cycles)
9
74
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVS1 Series Notice
■ Notice (Operating and Storage Conditions)
1. Store in temperatures of -10 to +40deg. C and
relative humidity of 30-85%RH.
(1) Corrosive gasses atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
(Ex. Water, Oil, Medical liquid, Organic
solvent, etc.)
5. Do not store under direct sunlight.
6. Do not use the rotary position sensor under the
following environmental conditions. If you use
the rotary position sensor in an environment other
these listed below, please consult with Murata
factory representative prior to using.
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)-PVS1A Type
1. Soldering
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the rotary position sensor may deviate from the
specified characteristics.
(1) PVS1A series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) The dimension of land pattern used should be
Murata's standard land pattern at reflow
soldering. Excessive land area may cause
displacement due to the effect of the surface
tension of the solder. Insufficient land area
may cause insufficient soldering strength on PCB.
(3) Standard soldering condition
(4) The amount of solder is critical. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the
terminals.
(5) The soldering iron should not come in contact
with the cover of the rotary position sensor. If
such contact does occur, the rotary position
sensor may be damaged.
(a) Reflow soldering : Refer to the standard
temperature profile.
(b) Soldering iron:
2. Mounting
>Temperature of tip 360 deg. C max.
(1) Do not apply excessive force (preferable 9.8N
(Ref.; 1kgf) max.), when the rotary position
sensor is mounted to the PCB.
>Soldering time
>Diameter
3 sec. max./1 terminal
3mm max.
>Wattage of iron 30W max.
(2) Do not warp and/or bend PCB to prevent the rotary
position sensor from breakage.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
3. Cleaning
Cannot be cleaned because of open construction.
■ Notice (Soldering and Mounting)-PVS1L Type
1. Soldering
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the rotary position sensor may deviate from the
specified characteristics.
(1) PVS1L series can be soldered by flow soldering
method and soldering iron. Do not use reflow
soldering method.
(2) Standard soldering condition
(a) Flow soldering
(3) The amount of solder is critical.
(4) The soldering iron should not come in contact
with the cover of the rotary position sensor. If
such contact does occur, the rotary position
sensor may be damaged.
>Pre-haeting temp.: 80-100 deg. C
>Soldering temp. : 260 deg. C max.
>Soldering time : 3 sec. max.
(b) Soldering iron
2. Mounting
9
>Temperature of tip: 360 deg. C max.
>Soldering time : 3 sec. max./1 terminal
(1) Use PCB hole to meet the pin of the rotary
position sensor. If the rotary position sensor
is installed into insufficient PCB hole, the
rotary position sensor may be damaged by
mechanical stress.
>Diameter
: 3mm max.
>Wattage of iron : 30W max.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
(2) Do not apply excessive force (preferably 9.8N
(Ref.; 1kgf) max.), when the rotary position
Continued on the following page.
75
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
PVS1 Series Notice
Continued from the preceding page.
sensor is mounted to the PCB.
3. Cleaning
Cannot be cleaned because of open construction.
■ Reflow Soldering Standard Profile
Gradual cooling
in air
Pre-heating in air
Soldering
260
230
200
150
100
0
60-120 sec.
40 sec. max.
Time
(Melting zone)
■ Notice (Handling)
Uncontrolled mechanical force except usual rotation on
the hollow rotor of product, may cause big change of
electrical characteristic, big increase of rotational
torque or mechanical damage of product.
Therefore, please pay your attention on the following
points for your design.
1. The fixing method of product must be soldering by
the terminals of product. And please don't fix by
screw cramping of supporting board which might
cause mechanical deformation of product.
2. Your connecting shaft must be sustained by your
bearing and any uncontrolled force should not
apply on the hollow rotor of product.
■ Notice (Other)
1. Please make sure the connecting impedance is not to
be less than 10M ohm. The rotary position sensor
is designed to connect the output terminal and A/D
port of the microprocessor directly. Therefore,
connecting impedance presupposes certain M ohm and
the contact resistance is set high.
applied the mean value.
(2) Data considered as error should be invalid.
(3) If suspicious data is found, the data should be
re-installed.
3. Before using rotary position sensor, please test
after assembly in your particular mass production
system.
2. To minimize the processing error and noise
influence which occur in rare cases, when data is
installed through the product, please note the
following items and program your software.
(1) Data install should be done plural times and
4. MURATA cannot guarantee rotary position sensor
integrity when used under conditions other than
those specified in this document.
9
76
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods
The tests and measurements should be conducted under the condition of 15 to 35°C of temperature, 25 to 75% of relative humidity and 86 to 106 kpa of
atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned
conditions, the tests and measurements should be conducted under the condition of 25±2°C of temperature and, 45 to 55% of relative humidity and 86 to
106 kpa of atmospheric pressure.
No.
Item
Test Methods
Measure total resistance between the resistance element and terminals (terminals #1 and #3) with the contact arm
positioned against a stop. The positioning of the contact arm and terminal should be the same for subsequent total
resistance measurements on the same device.
Use the test voltage specified in Table-1 for total resistance measurements. This voltage should be used whenever a
subsequent total resistance measurement is made.
Total Resistance,
Nominal (ohm)
Maximum Test
Voltage (V)
1
Total Resistance
10VRV100
100FRV1k
1kFRV10k
10kFRV100k
100kFR
1.0
3.0
10.0
30.0
100.0
Table 1: Total resistance test voltage
Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance
between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-
wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-
minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not
exceeded.
2
Residual Resistance
Contact resistance variation should be measured with the measuring circuit shown below, or its equivalent. The
operating wiper should be rotated in both directions through 90% of the actual effective-electrical travel for a total of
6 cycles.
The rate of rotation of the operating wiper should be such that the wiper completes 1 count in determining whether or
not a contact resistance variation is observed at least twice in the same location. The test current should follow the
value given in Table-2 unless otherwise limited by the power rating.
Oscilloscope
Standard Total
Resistance R (ohm)
Rx
#3
#1
Test Current
3
Contact Resistance
#2
Proofread
Resistence
Constant Current
Source
(Test current
shown in Table 2)
100VRF10k
10kVRF100k
100kVR
10mA max.
1mA max.
100µA max.
AC
Amplifier
Table 2: Test current for CRV
Rx : Trimmer Potentiometer
Oscilloscope bandwidth :100Hz to 50kHz
Figure 1: CRV measuring circuit
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 40±2°C and 90 - 95% without loading for 500±12 hours.
The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.
4
5
Humidity Exposure
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 70±2°C without loading for 500±12 hours. The resistance value should be
measured after keeping the potentiometer in a room for 1.5±1/6 hours.
High Temperature
Exposure
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 40±2°C and 90 - 95% with loading the 1/2 rated voltage between #1 and
#2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12hours.
Humidity Load Life
Load Life
6
7
The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be placed in a chamber at 70±2°C (50±2°C for PVZ) with loading the 1/2 rated voltage between #1
and #2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12 hours. The resistance value should be
measured after keeping the potentiometer in a room for 1.5±1/6 hours.
The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-
tiometer should be subjected to Table 3,Table 4 temperature for 5 cycles. The resistance value should be measured
after keeping the potentiometer in a room for 1.5±10 minutes.
8
Temperature Cycle
Sequence
1
2
3
4
Sequence
1
2
3
4
Temp. (°C) -25±3 +25±2 +85±3 +25±2
Time (min.) 30±3 10max. 30±3 10max.
Temp. (°C) -55±3 +25±2 +125±3 +25±2
Time (min.) 30±3 10max. 30±3 10max.
Table 4: PVA3/PVS3/PVM4A---C01
Table 3: PVZ
9
Continued on the following page.
77
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
S
M
D
O
p
e
n
T
y
pe
a
n
d
S
M
D
S
ea
le
d
T
y
pe PVM4A_C01 Series Specifications and Test Methods
Continued from the preceding page.
No.
Item
Test Methods
The trimmer potentiometer should be subjected to each of the following temperatures (see Table 5, Table 6) for 30
to 45 minutes. The resistance value should be measured in the chamber.
R2 – R1
R1 (T2 – T1)
TCR=
Z 106 (ppm/°C)
T1 : Reference temperature in degrees celsius
T2 : Test temperature in degrees celsius
R1 : Resistance at reference temperature in ohm
R2 : Resistance at test temperature in ohm
Temperature Coefficient of
Resistance
9
Sequence
1*
2
3*
4
Sequence
1
2
3*
4
Temp. (°C) +25±2 -25±3 +25±2 +85±3
Note*: Norm temp.
Temp. (°C) +25±2 -55±3 +25±2 +125±3
Table 6: PVA3/PVS3/PVM4A---C01
Table 5: PVZ
The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per
minute, for 10 cycles continuously. The resistance value should be measured after keeping the potentiometer in a
room for 10±5 minutes.
10 Rotational Life
9
78
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
SMDSealedType/Lead Sealed Type Specifications and Test Methods
The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification
for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts).
No.
Item
Test Methods
Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned
against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance
measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements.
This voltage should be used for all subsequent total resistance measurements.
Total Resistance,
Nominal (ohm)
Maximum Test
Voltage (V)
1
Total Resistance
10VRV100
100FRV1k
1kFRV10k
10kFRV100k
100kFR
1.0
3.0
10.0
30.0
100.0
Table 1: Total resistance test voltage
Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance
between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-
wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-
minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not
exceeded.
2
Residual Resistance
Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The
adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational
angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a
contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points
where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the
adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum
to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by
power rating.
Standard Total Resistance
Oscilloscope
Rx
Test Current
#3
#1
R (ohm)
Contact Resistance
Variation
3
RV100
20mA
10mA
4mA
2mA
1mA
200µA
100µA
50µA
30µA
#
2
Constant Current Source
(Test current shown in Table2)
100FRF500
500VRF1k
1kVRF2k
2kVRF50k
50kVRF200k
200kVRF1M
1MVRF2M
2MVR
Proofread
Resistance
AC
Amplifier
Rx : Trimmer Potentiometer
Oscilloscope bandwidth :100Hz to 50kHz
Figure 1: CRV measuring circuit
Table 2: Test current for CRV
The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45 min-
utes. Temperature coefficient of resistance should be applied to the following formula.
R2 – R1
R1 (T2 – T1)
TCR=
Z 106 (ppm/°C)
T1 : Reference temperature in degrees celsius
T2 : Test temperature in degrees celsius
R1 : Resistance at reference temperature ohm
R2 : Resistance at test temperature in ohm
Temperature Coefficient of
Resistance
4
Sequence
Temperature (°C)
1*
2
3
4*
5
6
Min. operating
Temperature
Max. operating
Temperature
+25
-15
+25
+65
Note*: Reference temperature
Table 3: Test temperatures
The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An
adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1
and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the
following formula.
E
e'
E
e
E
9
Voltage Setting
Stability
Voltage setting stability=
e : Before test
–
Z100 (%)
(
)
5
#1
#3
(The voltage between terminal #1 and terminal #2)
e': After test
#2
e
(The voltage between terminal #1 and terminal #2)
E: The voltage between terminal #1 and terminal #3
Figure 2
Continued on the following page.
79
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
SMDSealedType/LeadSealedType Specifications and Test Methods
Continued from the preceding page.
No.
Item
Test Methods
The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer
should be removed from the chamber, and maintained at a temperature of 25±5°C for 1~2 hours.
Sequence
1
2
3
4
+125±3
+25±2 +150±3 +25±2
+60±3
PV-- series
PV22 series
PVF2 series
Temp.
(°C)
-55±3
6
Temperature Cycle
-25±3
30
Time (min.)
5 max.
30
5 max.
Table 4: One cycle of temperature cycle.
1) PVC6, PV12, PV32, PV34 PVM4A---D01 series
The trimmer potentiometer should be placed in a chamber at a temperature of 40±2°C and a humidity of 90~95%
without loading for 250±8 hours (500±12 hours for PVM4A---D01 series). The trimmer potentiometer should be
removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours.
2) PVF2 series
The trimmer potentiometer should be placed in a chamber at 60±2°C and 90~95% without loading for 1000±12
hours. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C
for 5±1/6 hours
2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37 series
The trimmer potentiometer should be subjected Figure-3 the programmed humidity environment for 10 cycle. The trim-
mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1.5±1/2
hours.
MIL-STD-202 METHOD 106
80-98%RH
80-98%RH
70
65
60
55
50
45
40
35
30
25
20
90-98%RH
90-98%RH
90-98%RH
INITIAL CONDITIONING
IN A DRY OVEN
24 HOURS
RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.
HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED
TO RADIANT HEAT FROM CHAMBER-CONDITIONING
PROCESSES
7
Humidity
HUMIDITY
UNCONTROLLED
END OF FINAL CYCLE
MEASUREMENTS AS
SPECIFIED IN 3.6
+10°C
-2°C
CIRCULATION OF CONDITIONING AIR SHOULD
BE AT A MINIMUM CUBIC RATE PER MINUTE
EQUIVALENT TO 5 TIMES THE VOLUME OF
THE CHAMBER
INITIAL MEASUREMENTS
15 AS SPECIFIED IN 3.2
10
5
VOLTAGE APPLIED AS SPECIFIED IN 3.5
0
UNLESS OTHERWISE SPECIFIED
TEMPERATURE TOLERANCE IS,
-5
STEPS 7a AND 7b PERFORMED DURING ANY
5 OF THE FIRST 9 CYCLES. HUMIDITY
UNCONTROLLED DURING STEPS 7a AND 7b
ONLY
-10 ±2°C AT ALL POINTS WITHIN THE
STEP 7b
STEP 7a
CHAMBER EXCEPT THE IMMEDIATE
VICINITY OF THE SPECIMENS AND
THE CHAMBER SURFACES
PRIOR TO FIRST CYCLE
UNLESS OTHERWISE
SPECIFIED
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6
STEP 7
ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Figure 3
1) PV-- series
The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete frequen-
cy range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the three
axis direction for a total of 12 sweeps.
8
9
Vibration
2) PVF2 series
The trimmer potentiometer should be subjected to vibration at 0.3 inch amplitude. The frequency should be varied
uniformly between the approximate limits of 10Hz and 55Hz. This motion should be applied for period of 2 hours in
each of 3 mutually perpendicular directions (total of 6 hours).
1) PV-- series
The trimmer potentiometer should be shocked at the 100G (50G for PV22 and PV23 series) level and should be
subjected to 4 shocks in each of the three axis directions for a total of 12 shocks.
2) PVM4A---D01 series
Shock
The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the
six axis directions for a total of 18 shocks.
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently
between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of
1000±12 hours, at a temperature of 70±2°C (85±2°C for PV01 and PV37 series, 50±2°C for PVF2 series). The trim-
mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours.
10 Temperature Road Life
9
The trimmer potentiometer should be placed in a chamber at a temperature of 125±3°C (150±3°C for PV22 series)
250±8 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a
temperature of 25±5°C for 1 to 2 hours.
High Temperature Exposure
(Except for PVF2)
11
The trimmer potentiometer should be placed in a chamber at a temperature of -55±3°C for 1 hours without loading.
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes.
The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for
approximately 24 hours.
Low Temperature Exposure
(Except for PVF2 and
PVM4A---D01)
12
Continued on the following page.
80
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
SMDSealedType/Lead Sealed Type Specifications and Test Methods
Continued from the preceding page.
No.
13
Item
Test Methods
Low Temperature Operation
(Only for PVF2 and
PVM4A---D01)
The trimmer potentiometer should be placed in a chamber at a temperature of -25±3°C (-55±3°C for PVM4A---
D01 series) 48±4 hours without loading. The trimmer potentiometer should be removed from the chamber, and main-
tained at a temperature of 25±5°C for 1-2 hours
1)PV-- series
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit
shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of effec-
tive-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maxi-
mum for total of 200 cycles.
Resistor 1
Resistor 2
End Terminal
End Terminal
End Terminal
End Terminal
14 Rotational Life
DC supply
Figure 4
2) PVG3, PVG5 series
The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical rotation-
al angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50
(100 for PVG5) cycles, without loading.
3) PVF2, PVM4A---D01 series
The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per
minute, for 100 cycles continuously.
9
81
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Angle Sensing Potentiometer Specifications and Test Methods
Test Methods
No.
Item
Independent linearity should vary no more than ±2% within ±160° to 50% voltage ratio.
Taper : linear, 100%/333.3° Measured with the circuit as below (Figure 1).
100%
Guarantee limit for linearity
DC5V (#3)
GND (#1)
Output voltage ratio (%)
V (1-2)
V (1-3)
50%
0%
Connection Impedance : 1M ohm min.
Output (#2)
X100
1
Linearity
100% / 333.3°
-160°
0°
Rotational angle (°)
+160°
CCW
CW
Figure-1
The rotary position sensor should be subjected to each of the following temperatures (see Table 1) for 30-45 minutes.
Temperature coefficient of resistance should be applied to the following formula.
R2 – R1
R1 (t2 – t1)
TCR=
Z 106 (ppm/°C)
t1 : Reference temperature in degrees celsius
t2 : Test temperature in degrees celsius
R1 : Resistance at reference temperature in ohm
R2 : Resistance at test temperature in ohm
Temperature
Coefficient of
Resistance
2
Sequence
*1
2
*3
4
Temperature (°C)
+25
-40
+25
+85
Note * : Reference temperature
Table-1 Test temperatures
The rotary position sensor should be subjected to Table 2 temperature for 5 cycles.
Then, the rotary position sensor should be kept in the dry box for 24 +8/-0 hrs.
Temperature
Cycle
(Thermal Shock)
Sequence
Temperature (°C)
Time (min.)
1
2
3
4
3
-40±3
30
+25±2
5 max.
+85±3
30
+25±2
5 max.
Table 2: One cycle of temperature cycle
The rotary position sensor should be stored in a chamber at temperature of +60±2°C and relative Humidity of 90-95% for 250±8
hrs. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.
4
5
Humidity
Vibration
The rotary position sensor should be tested under the condition of the amplitude of 1.5mm, the frequency range from 10 to 55Hz
(should be traversed in approximately one minute) and 2 hours in each of 3 mutually perpendicular directions (total 6 hours).
Then, the rotary position sensor should be kept in the dry box for 1-2 hrs.
The rotary position sensor should be tested under the condition of the peak acceleration 20G max. in half-sine wave and 5 shocks
in each of 3 mutually perpendicular directions (total 15 shocks). Then, the rotary position sensor should be kept in the dry box for
1-2 hrs.
6
7
Shock
Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of
the rotary position sensor, 1.5 hours on and 0.5 hours off, for 96±4 hours in total in a chamber at a temperature of +40±2°C and
relative humidity of 90-95%. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-
0 hours.
Humidity Load
Life
High Temp.
Exposure
The rotary position sensor should be stored in a chamber at the temperature of +85±3°C without loading for 250±8 hours. After
removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.
8
9
Low Temp.
Exposure
The rotary position sensor should be stored in a chamber at the temperature of -40±3°C without loading for 168±4 hours. After
removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.
The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of one cycle for
6 seconds for 1 Million cycles under the condition of +25±2°C of temperature without loading.
10 Rotational Life
9
82
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Packaging
■ Minimum Quantity
Minimum Quantity (pcs.)
Part Number
Bulk
1000
1000
1000
1000
500
500
500
—
ø330mm reel
Ammo Pack
Magazine
—
Tray
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1000
ø180mm reel
3000
3000
2000
1500
2500
2000
1000
500
500
500
250
500
—
12000
—
—
—
PVZ2A
PVZ2K
PVZ3A
PVZ3K/R
PVS3
—
8000
—
—
—
—
—
8000
8000
—
—
—
—
—
PVA3
—
—
PVG3A/G
PVG3K
PVM4
—
—
—
500
100
50
3000
—
—
—
—
—
PVF2A
PVG5A
PVG5H
PV01W
PV01P
—
—
—
50
—
—
—
—
—
—
50
50
50
50
50
—
—
—
—
—
—
—
—
—
PV01X
—
—
—
50
PVC6A/D/G/H/E
PVC6M/Q
PV34
—
—
1000
—
50
—
—
100
100
50
—
—
—
—
PV32
—
—
—
—
PV23/12
PV22
—
—
—
—
30
—
—
1000
—
50
50
40
40
—
50
PV36W
PV36Y
—
—
50
—
—
1000
—
50
PV36X
—
—
50
PV36Z/P
PV37Y/Z
PV37W/X/P
PVS1A
PVS1L
—
—
1000
—
50
—
—
—
50
—
1000
—
—
—
50
—
—
—
—
■ Dimensions of Reel
13.0±0.5 dia.
21.0±0.8 dia.
2.0±0.5
178±2 dia.
*
2.0±0.5 (PVG5A—1.0±0.5)
* 10.0±1.5 ( 8mm Width) — PVZ2A, PVZ3A, PVS3, PVA3, PVF2
9
14.0±1.5 (12mm Width) — PVG5H, PVG3, PVZ2K, PVZ3K, PVZ3R, PVM4
17.0±1.5 (16mm Width) — PVG5A
(in mm)
Continued on the following page.
83
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Packaging
Continued from the preceding page.
■ Dimensions of Reel
PVS1
13.0±0.5 Dia.
2.0±0.5
21.0±0.8 Dia.
2.0±0.5
25.5±1.0
328±2 Dia.
(in mm)
■ Dimensions of Plastic Tape
PVZ2 / PVZ3 / PVA3 / PVS3 / PVF2
2.0±0.1
+0.1
1.5
dia.
I
–0
4.0±
0.1
4.0±0.1
a
J
1.75±0.1
D
C
B
A
Across a – a'
a'
Tape feeding direction
Part Number
PVZ2A
A
B
C
D
I
J
3.1±0.1
5.7±0.1
3.8±0.2
5.8±0.2
6.5±0.2
4.1±0.2
2.3±0.2
8.0±0.2
12.0±0.1
8.0±0.2
3.5±0.1
5.5±0.1
3.5±0.1
0.2±0.1
0.3±0.1
0.2±0.1
2.4±0.1
1.1±0.1
PVZ2K
PVZ3A/PVA3
PVZ3K
PVZ3R
PVS3
1.95±0.1
2.3±0.1
2.1±0.1
1.6±0.1
2.3±0.1
3.3±0.2
2.3±0.2
12.0±0.2
8.0±0.2
5.5±0.1
3.5±0.1
0.3±0.1
0.2±0.1
0.3±0.1
PVF2
• The side containing terminals #1 and #3 faces the plastic tape pilot holes.
(in mm)
Continued on the following page.
9
84
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Packaging
Continued from the preceding page.
■ Dimensions of Plastic Tape
PVG3A / PVG3G / PVM4 / PVG5H
2.0±0.1
+0.1
–0
I
8.0±0.1
4.0±0.1
1.5
dia.
a
J
B
Across a – a'
a'
A
Tape feeding direction
Part Number
PVG3A
A
B
I
J
4.0±0.1
4.9±0.1
5.5±0.2
5.8±0.2
4.0±0.1
2.1±0.1
0.3±0.1
PVG3G
PVM4
4.5±0.2
5.4±0.2
2.15±0.1
4.0±0.1
0.3±0.1
0.4±0.1
PVG5H
• The side containing terminals #1 and #3 faces the plastic tape pilot holes
(except PVG3).
(in mm)
PVG5A
2.0±0.1
+0.1
–0
I
12.0±0.2
4.0±0.1 1.5
dia.
a
J
B
Across a – a'
a'
A
Tape feeding direction
Part Number
A
B
I
J
4.3±0.2
5.4±0.2
5.4±0.1
0.4±0.1
PVG5A
(in mm)
Continued on the following page.
9
85
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Packaging
Continued from the preceding page.
■ Dimensions of Plastic Tape
PVG3K
PVS1
3.5
4.0
4.0±0.1
0.4±0.05
2.8±0.1
0.3±0.1
+0.1
-0
2.0±0.05
1.5
Dia.
+0.1
-0
a
1.5
dia.
2.0±0.1
a
a'
8.0±0.1
Across a-a'
11.4
Across a-a'
4.0±0.1
a'
16.0
Tape feeding direction
(in mm)
(Tolerance: ±0.1)
Tape feeding direction
(in mm)
■ Dimensions of Radial Taping
PVC6M
PVC6Q
0.55W×3.2L×1.3D
0.55W×3.2L×1.3D
6.9
12.7±1.0
6.9
0±2
3.2 Dia.
3.2 Dia.
12.7±1.0
#2
0±2
B
B'
3-0.5 Dia.
#3
#1
2.5
2.5
3-0.5 Dia.
B
B'
A
A'
Across B-B'
2.5±0.5 2.5±0.5
Across B-B'
#1 #2 #3
A
A'
2.5±0.5 2.5±0.5
#1 #2 #3
6.35±0.70
4.0±0.1 Dia.
Across A-A'
(
12.7±0.3
Across A-A'
(
6.35±0.70
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
4.0±0.1 Dia.
12.7±0.3
)
)
PV37Y
PV37Z
12.7±1.0
12.7±1.0
0±2.0
6.4
0±2.0
6.4
3−0.4±0.1 Dia
B
B'
3−0.4±0.1 Dia
B
B'
A
A'
A
A'
#3 #2 #1
#3 #2 #1
4.0±0.1 Dia.
4.0±0.1 Dia.
6.35±0.70
2.5
2.5
6.35±0.70
2.5
2.5
12.7±0.3
12.7±0.3
2.5±0.5
2.5±0.5
2.5±0.5
2.5±0.5
Across A-A'
in mm
)
in mm
Tolerance : ±0.3
Across A-A'
(
(
)
Tolerance : ±0.3
Across B-B'
Across B-B'
Continued on the following page.
9
86
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Packaging
Continued from the preceding page.
■ Dimensions of Radial Taping
PV36W
PV36X
12.7±1.0
12.7±1.0
0±2.0
9.6
0±2.0
9.6
3−0.5±0.1 Dia
3−0.5±0.1 Dia
B
B'
A
B
B'
A
A'
A'
#3#2 #1
#3 #2 #1
6.35±0.70
4.0±0.1 Dia.
4.0±0.1 Dia.
6.35±0.70
2.5
2.5
12.7±0.3
12.7±0.3
2.5
2.5
2.5±0.5
2.5±0.5
2.5±0.5
2.5±0.5
Across A-A'
in mm
Tolerance : ±0.3
in mm
Tolerance : ±0.3
Across A-A'
Across B-B'
Across B-B'
(
)
(
)
■ Dimensions of Ammo Pack
T
3
1
T
(in mm)
■ Dimensions of Magazine Packaging
PV01
PVC6
9.0±0.5
+0
370
–1.0
+0
–1.0
413
9.8±0.5
PV36W/Y/X/Z
PV36P
+0
+0
7.3±0.5
508
–1.0
11.5±0.5
508
–1.0
9
(in mm)
87
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Recommended Adjustment Tools/Qualified Standards
■ Recommended Adjustment Tools
Trimmer Potentiometer Series
Manufacturers
Model Number
KMDR090
MURATA Model Number
KMDR090
Blade
– Minus (round edge)
+ Cross
MURATA MFG.
PVZ2
VESSEL MFG.
No.9000+0Z30
No.9000+1.7Z30
SA-2225
KMDR150
PVZ2A_A04
VESSEL MFG.
KMDR080
+ Cross
PVZ3
PVA3
TORAY INDUSTRIES, INC.
VESSEL MFG.
KMDR070
– Minus (round edge)
+ Cross
No.9000+1.7Z30
SA-2225
KMDR080
TORAY INDUSTRIES, INC.
TORAY INDUSTRIES, INC.
TORAY INDUSTRIES, INC.
VESSEL MFG.
KMDR070
– Minus (round edge)
– Minus (round edge)
– Minus (round edge)
– Minus
SA-2225
KMDR070
PVS3
PVG3
PVM4
SA-2225
KMDR070
No.9000–2.6Z30
No.9000–1.3Z30
DA-54
KMDR120
VESSEL MFG.
KMDR130
– Minus
PVG5
PVC6
ENGINEER INC.
– Minus
VESSEL MFG.
No.9000+0Z30
SA-2225
KMDR150
KMDR070
KMDR110
KMDR180
+ Cross
TORAY INDUSTRIES, INC.
VESSEL MFG.
– Minus (round edge)
– Minus
No.9000–1.8Z30
DA-40
– Minus (both ends)
– Minus
others
ENGINEER INC.
DA-55
For Automatic Adjustment
Trimmer Potentiometer Series
Manufacturers
Model Number
MURATA Model Number
Blade
PVZ3
PVA3
PVS3
PVG3
TORAY INDUSTRIES, INC.
JB-2225
KMBT070
– Minus (round edge)
No.CA-10
JB-2225
KMBT090
KMBT070
+ Cross
VESSEL MFG.
PVC6
– Minus (round edge)
TORAY INDUSTRIES, INC.
■ Qualified Standards
The products listed here have been produced by the QS9000 and ISO9001 certified factory.
MURATA FACTORY
Qualified Date
Standard
Qualified Number
Sabae Murata Mfg.Co.,Ltd.
August 14, 1997
May 12, 1999
UNDERWRITERS LABORATORIES INC.
UNDERWRITERS LABORATORIES INC.
A5704
A7924
Wuxi Murata Electronis Co.,Ltd.
No ODCs (Ozone Depleting Chemicals) are used on all Murata's trimmer potentiometers.
9
88
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note
R50E13.pdf 04.6.11
Note:
1. Export Control
For customers outside Japan
<
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use
in applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
t Medical equipment
u Traffic signal equipment
o Data-processing equipment
r Power plant equipment
y Transportation equipment (vehicles, trains, ships, etc.)
i Disaster prevention / crime prevention equipment
! Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of April 2004. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
He a d O ffice
In te rn a tio n a l Divisio n
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
相关型号:
PV32N253A01B00
Trimmer, Cermet, 0.5W, 25000ohm, 300V, 20% +/-Tol, -100,100ppm/Cel, 1 Turn(s), 2725, ROHS COMPLIANT
MURATA
PV32N254A01B00
Trimmer, Cermet, 0.5W, 250000ohm, 300V, 20% +/-Tol, -100,100ppm/Cel, 1 Turn(s), 2725, ROHS COMPLIANT
MURATA
PV32N500A01B00
Trimmer, Cermet, 0.5W, 50ohm, 300V, 20% +/-Tol, -100,100ppm/Cel, 1 Turn(s), 2725, ROHS COMPLIANT
MURATA
©2020 ICPDF网 联系我们和版权申明