PVZ3G474C01B00 [MURATA]
RESISTOR, TRIMMER, CARBON FILM, 1 TURN(S), 0.1W, 470000ohm, ROHS COMPLIANT;
| 型号： | PVZ3G474C01B00 |
| 厂家： | 
muRata |
| 描述： | RESISTOR, TRIMMER, CARBON FILM, 1 TURN(S), 0.1W, 470000ohm, ROHS COMPLIANT 电阻器 |
| 文件： | 总11页 (文件大小：263K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Trimmer Potentiometers
SMD Open Type 3mm Size PVZ3 Series
2
PVZ3 Series
3.1
1.0
#2
1.15 Dia.
2.2 Dia.
1.85 0.1
Features
c
0.25 0.1
0.1 max.
3.0 Dia.
1. Excellent solderability characteristics are
achieved via special plating techniques on each
termination.
2. Specially designed substrate prevents wicking of
flux onto the top of the part body.
#1
#3
0.75
1.0
0.75
#2
3. Funnel shaped adjustment slot allows for in-process
automatic adjustment.
#1
CLOCKWISE
#3
PVZ3A
PVZ3H
PVZ3G
PVZ3K
(PVZ3A/PVZ3H/PVZ3K Series)
Tolerance: 0.3
4. High-heat resistance type is available
(PVZ3A_C01/PVZ3K_E01).
(
)
in mm
5. Enlarged bottom termination enhances soldering
strength while reducing the necessary land area
required, promoting high-density PCB mounting
(PVZ3A/PVZ3H/PVZ3G Series).
1.55
0.40
Soldering Part
0.25
6. The standard position of the driver plate is adjusted
at the center normally, but another position is also
available.
3.1
0.40
0.8
#2
7. This product meets PB-free standards.
8. Complies with RoHS directive.
Applications
c
1. Optical pick up
2. Cordless telephones
3. CD players
4. E-Book
6. CD-ROMs
#1
#3
in mm
Tolerance : 0.3
0.55
1.2
3.1
0.55
(
)
7. Car stereos
8. TFT-LCD TV sets
9. Headphone stereos
1.15 0.10
0.4
0.8
#2
5. Motor
#1
#3
0.55
0.55
1.2
#2 (Wiper Contact)
#3
#1
CLOCKWISE
CIRCUIT
Tolerance: 0.3
(
)
in mm
2.1
1.85±±.1
3.1
±.25±±.1
#2
#3
#1
Soldering Part
1.1
1.15 Dia.
2.2 Dia.
3.± Dia.
#2 (Wiper Contact)
#3
#1
CLOCKWISE
CIRCUIT
Tolerance: ±±.3
±.85 ±.9 ±.85
(
)
in mm
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Top Adjustment (H 1.85)
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
(W)
Mechanical Rotation Angle
Total Resistance Value
PVZ3A221C01
PVZ3A471C01
PVZ3A102C01
PVZ3A222C01
PVZ3A472C01
PVZ3A103C01
PVZ3A223C01
PVZ3A473C01
PVZ3A104C01
PVZ3A224C01
PVZ3A474C01
PVZ3A105C01
PVZ3A225C01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
2
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
Top Adjustment (H 1.55)
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
(W)
Mechanical Rotation Angle
Total Resistance Value
PVZ3H221C01
PVZ3H471C01
PVZ3H102C01
PVZ3H222C01
PVZ3H472C01
PVZ3H103C01
PVZ3H223C01
PVZ3H473C01
PVZ3H104C01
PVZ3H224C01
PVZ3H474C01
PVZ3H105C01
PVZ3H225C01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
Top Adjustment and Thin Type (H 1.15)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVZ3G221C01
PVZ3G471C01
PVZ3G102C01
PVZ3G222C01
PVZ3G472C01
PVZ3G103C01
PVZ3G223C01
PVZ3G473C01
PVZ3G104C01
PVZ3G224C01
PVZ3G474C01
PVZ3G105C01
PVZ3G225C01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Rear Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVZ3K221E01
PVZ3K471E01
PVZ3K102E01
PVZ3K222E01
PVZ3K472E01
PVZ3K103E01
PVZ3K223E01
PVZ3K473E01
PVZ3K104E01
PVZ3K224E01
PVZ3K474E01
PVZ3K105E01
PVZ3K225E01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
2
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
Construction
c
PVZ3A
Construction
Standard Land Pattern
c
c
PVZ3G
PVZ3A/PVZ3G/PVZ3H
1.1
Driver Plate
Wiper
#2-Terminal
Resistive
Element
#1-Terminal
Resin Substrate
#3-Terminal
1.0
0.7
1.0
Tolerance : 0.1
(
)
in mm
Construction
c
PVZ3H
Driver Plate
Wiper
1
#2 Terminal
#1 Terminal
4
Resistive Element
Resin Substrate
#3 Terminal
Continued on the following page.
12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Continued from the preceding page.
Construction
Standard Land Pattern
c
c
PVZ3K
PVZ3K
Driver Plate
#2-Terminal
1.5
#1-Terminal
2
Wiper
0.5
3.0
Resistive Element
(Carbon)
#3-Terminal
Tolerance : 0.1
in mm
(
)
Resin Substrate
Characteristics
c
Humidity Exposure
Res. Change: +10, -2%
<
High Temperature
Exposure
Res. Change: R 100kohm···+2, -10%
=
100kohm<R···+2, -15%
Humidity Load Life
Load Life
Res. Change: 10%
<
Res. Change: R 100kohm···+2, -10%
=
100kohm<R···+2, -15%
Temperature Cycle
Rotational Life
Res. Change: 5%
Res. Change: 10% (10 cꢀcles)
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVZ3 Series Notice
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
2
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. If the trimmer potentiometer is used in DC and high
humidity conditions, please connect wiper (#2) for
plus and resistive element (#1 or #3) for minus.
Notice (Soldering and Mounting)
c
1. Soldering
(4) The soldering iron should not come in contact with
the case of the trimmer potentiometer. If such
contact does occur, the trimmer potentiometer
may be damaged. (PVZ Series only)
2. Mounting
(1) Soldering conditions
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
Do not use flow soldering method (dipping).
If you use the flow soldering method, the
trimmer potentiometer may not function.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(1) Do not apply excessive force, preferably 4.9N
max. (Ref. 500gf) when the trimmer potentiometer
is mounted to the PCB.
(2) Do not warp and/or bend the PC board to protect
trimmer potentiometer from breakage.
(3) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 2.5-2.8mm dia. and inner dimension
2mm dia.
3. Cleaning
(3) Apply the appropriate amount of solder paste.
The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the dimension
of land pattern used should be Murata's standard
land pattern at reflow soldering. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB.
(1) In case there is flux on the resistive element,
clean sufficiently with cleaning solvents and
completely remove all residual flux.
(2) Isopropyl alcohol and ethyl alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
performance with your product.
Excessive amounts of solder may cause bridging
between the terminals.
Continued on the following page.
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVZ3 Series Notice
Continued from the preceding page.
Soldering Profile
c
Reflow Soldering Profile
1. Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu)
T5
T3
T4
T2
2
T1
t2
t3
Limit Profile
Standard Profile
Time (s)
t1
Standard Profile
Heating
Limit Profile
Heating
Peak
Temperature
(T3)
Peak
Temperature
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
(T5)
Pre-heating
Pre-heating
Cycle of
Reflow
Cycle of
Series
Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
°C
sec.
°C
sec.
°C
Time
°C
sec.
°C
sec.
°C
Time
PVZ3
150 to 180 60 to 120
220
30 to 60
245 3
2
150 to 180 60 to 120
220
30 to 60
260
2
2. Soldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to 1)
Standard Profile
Heating
T3
Peak
Temperature
(T3)
Pre-heating
Cycle of
Reflow
Series
T2
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
t2
T1
Standard Profile
°C
sec.
°C
sec.
°C
Time
PVZ3
150
60 to 120
183
30
230 max.
1
t1
Time (s)
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
Soldering Time
sec.
Soldering Iron Power Output
Cycle of Soldering Iron
°C
W
Time
PVZ3
350 10
3 max.
30 max.
1
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
>VESSEL MFG.: NO.9000+1.7x30
3. Please use within the effective rotational angle.
Do not have a mechanical stop for over rotation.
In cases out of effective rotational angle,
the trimmer potentiometer may not function.
4. When using a lock paint to fix the slot position or
cover the rotor, please evaluate performance with
your product. Lock paint may cause corrosion or
electrical contact problems.
(Murata P/N: KMDR080)
* Recommended screwdriver for automatic adjustment
>TORAY MFG.: JB-2225 (Murata P/N: KMBT070)
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
15
o Part Numbering
Trimmer Potentiometers
(Part Number)
PV Z3
A
103 C01 R00
q
w
e
r
t
y
qProduct ID
rTotal Resistance
Expressed by three figures. The unit is ohm. The first and second
figures are significant digits, and the third figure expresses the
number of zeros that follow the two figures.
Product ID
PV
Trimmer Potentiometers
wSeries
Ex.)
Code
100
Total Resistance
10Ω
eAdjustment Direction /Lead Type
102
1000Ω
Adjustment Direction/
Lead Type
Code
Series
Code
104
100000Ω (=100kΩ)
A
R
A
A
G
H
K
A
G
A
A
H
H
N
P
Top
Rear
SMD Open 2mm Size
Carbon Resistive Element
Z2
A2
tIndividual Specification
SMD Open 2mm Size
Top
Series
Code
Individual Specification Code
Top
Standard Type
PVA2
A01
Top
SMD Open 3mm Size
Carbon Resistive Element
Standard Type (High-heat Resistance
Type/Ultra-thin Type)
Z3
PVZ2
PVZ3
C04
Top
Rear
Standard Type (High-heat Resistance
Type/Top Adjustment)
C01
F01
E01
Top, J-hook
Top, Gull-wing
Top
G3
M4
G5
SMD Sealed 3mm Size
SMD Sealed 4mm Size
High Characteristic Carbon
Type (only PVZ3G)
Top
SMD Sealed 5mm Square
11 turns
High-heat Resistance Type
(for Rear Adjustment)
Side
Top, Triangle
Side, Triangle
Top, Triangle
Side, Triangle
Top, Inline
Side, Inline
Top, Triangle
Side, Triangle
Standard Type
High-reliability Type
Standard Type
C01
D01
A01
Lead Sealed 6mm Round
Single turn
32
12
36
37
PVM4
PV32/PV12
Lead Sealed 7mm Round
4 turns
T
PVG3/
PV36/PV37
Standard Type
Standard Type
C01
C03
W
X
Lead Sealed 10mm Square
25 turns
PVG5
W
X
Lead Sealed 6mm Square
12 turns
yPackaging
Code
B00
Packaging
Bulk
R00
Reel
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Packaging
Minimum Quantity
c
Minimum Quantity (pcs.)
Part Number
ø180mm reel
3000
3000
3000
2000
2500
1500
1000
500
Bulk
1000
1000
1000
1000
1000
1000
500
PVZ2A
PVZ2R
PVA2
PVZ3A/H
PVZ3G
PVZ3K
PVG3A/G
PVM4
500
250
100
PVG5A
PVG5H
PV32
500
100
—
100
—
50
PV12
—
100
PV36
—
100
PV37
Dimensions of Reel
c
PVZ2A/PVA2/PVZ3A/PVZ3G/PVZ3H
PVZ2R/PVZ3K/PVM4/PVG3/PVG5H
13.0o0.5 Dia.
21.0o0.8 Dia.
13.0o0.5 Dia.
2.0o0.5
2.0o0.5
21.0o0.8 Dia.
9.0o1.0
13.0o1.0
17.0o1.0
13.0o1.0
178o2 Dia.
178o2 Dia.
(in mm)
(in mm)
PVG5A
13.0 0.5 Dia.
2.0 0.5
21.0 0.8 Dia.
17.0 1.0
19.4 1.0
178.0 2.0 Dia.
(in mm)
Continued on the following page.
49
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Packaging
Continued from the preceding page.
Dimensions of Plastic Tape
c
PVZ2 / PVA2 / PVZ3
2.±±±.1
+±.1
1.5
–±
Dia.
I
4.±±
±.1
4.±±±.1
a
J
1.75±±.1
D
C
B
A
Across a – a'
a'
Tape feeding direction
Part Number
PVZ2A
A
B
C
D
I
J
3.1±±.1
5.1±±.2
3.1±±.1
8.±±±.2
12.±±±.2
3.5±±.1
5.5±±.1
1.1±±.1
1.±±±.1
1.1±±.1
1.95±±.1
1.3±±.1
2.3±±.1
±.2±±.1
±.3±±.1
2.4±±.2
PVZ2R
PVA2
8.±±±.2
3.5±±.1
5.5±±.1
±.2±±.1
±.3±±.1
PVZ3A/H
PVZ3G
PVZ3K
3.8±±.2
5.8±±.2
3.3±±.2
12.±±±.2
s 4HE SIDE CONTAINING TERMINALS ꢀꢁ AND ꢀꢂ FACES THE PLASTIC TAPE PILOT HOLESꢃ
(in mm)
Dimensions of Plastic Tape
c
PVG3A / PVG3G / PVM4 / PVG5H
2.±±±.1
+±.1
I
8.±±±.1
4.±±±.1
1.5
$IAꢃ
nꢆ
A
J
B
!CROSS A n Ag
Ag
A
4APE FEEDING DIRECTION
Part Number
PVG3A
A
B
I
J
4.±±±.1
4.9±±.1
5.5±±.2
5.8±±.2
4.±±±.1
2.1±±.1
±.3±±.1
PVG3G
PVM4
4.5±±.2
5.4±±.2
2.15±±.1
4.±±±.1
±.3±±.1
±.4±±.1
PVG5H
s 4HE SIDE CONTAINING TERMINALS ꢀꢁ AND ꢀꢂ FACES THE PLASTIC TAPE PILOT HOLES
ꢄEXCEPT 06'ꢂꢅꢃ
(in mm)
Continued on the following page.
50
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Packaging
Continued from the preceding page.
Dimensions of Plastic Tape
c
PVG5A
ꢀ.±±±.ꢁ
4.±±±.ꢁ ꢁ.5
+±.ꢁ
–±
I
ꢁꢀ.±±±.ꢀ
Dia.
a
J
B
Across a – a'
a'
A
Tape feeding direction
Part Number
A
B
I
J
4.3±±.ꢀ
5.4±±.ꢀ
5.4±±.ꢁ
±.4±±.ꢁ
PVG5A
(in mm)
51
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Recommended Adjustment Tools/Qualified Standards
Recommended Adjustment Tools
c
Trimmer Potentiometer Series
Manufacturers
Model Number
KMDR190
MURATA Model Number
KMDR190
Blade
+ Cross
MURATA MFG.
PVZ2/PVA2
PVZ3G
VESSEL MFG.
No.9000+1.7Z30
SA-2225
KMDR080
+ Cross
TORAY INDUSTRIES, INC.
VESSEL MFG.
KMDR070
– Minus (round edge)
– Minus
PVZ3A/PVZ3H/PVG3
PVM4
No.9000–2.6Z30
No.9000–1.3Z30
No.9000–1.8Z30
KMDR120
VESSEL MFG.
KMDR130
– Minus
PVG5
VESSEL MFG.
KMDR110
– Minus
others
For Automatic Adjustment
Trimmer Potentiometer Series
Manufacturers
Model Number
MURATA Model Number
Blade
PVZ3
PVG3
TORAY INDUSTRIES, INC
JB-2225
KMBT070
– Minus (round edge)
Qualified Standards
c
The products listed here have been produced by the ISO9001 and ISO/TS16949 certified factory.
MURATA FACTORY
Qualified Date
Standard
Qualified Number
Wuxi Murata Electronics Co.,Ltd.
May 12, 1999
UNDERWRITERS LABORATORIES INC.
A7924
* No ODCs (Ozone Depleting Chemicals) are used on all Murata's trimmer potentiometers.
52
相关型号：
©2020 ICPDF网 联系我们和版权申明