SAFFB876MFL0F0AR15 [MURATA]
SAW Filter, 1 Function(s), 876.5MHz, ROHS COMPLIANT PACKAGE-5;
| 型号： | SAFFB876MFL0F0AR15 |
| 厂家： | 
muRata |
| 描述： | SAW Filter, 1 Function(s), 876.5MHz, ROHS COMPLIANT PACKAGE-5 |
| 文件： | 总8页 (文件大小：527K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Datasheet of SAW Device
SAW Single Filter
for Band26 / Balanced / 5pin /1109
Murata PN: SAFFB876MFL0F0A
Feature
Smallest size
High Att.
Note : Murata SAW Component is applicable for Cellular /Cordless
phone (Terminal) relevant market only.
Please also read caution at the end of this document.
SAFFB876MFL0F0A ( Band26 / Balanced / 5pin / 1109 )
Revision No.
Description
Date
SAFFB876MFL0F0A_rev. A
■ Initial Release
Apr-04-2013
: -30 to +85 deg.C
: -40 to +85 deg.C
: 31.6mW (+15dBm), 2000 hours
: 3V (25+/-2 deg.C)
: 10M ohm
- Operating temperature
- Storage temperature
- Input Power
- D.C. Volatage between the terminals
- Minimum Resistance betweem the terminals
- RoHS compliance
: Yes
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd
1/7
SAFFB876MFL0F0A ( Band26 / Balanced / 5pin / 1109 )
Package Dimensions & Recommended Land Pattern
unit: mm
Dimensions
Marking : Laser Printing
* : Month code(Refer to the table A)
$
: Date code(Refer to the table B)
1 : Q
2
: S
Terminal Number
(1) : Unbalance Port
(3)(4) : Balance Port
Others : GND.
Land Pattern
Measurement Circuit (Top View)
R1 : 50 ohm
R2 : 100 ohm
L : 47 nH(Ideal inductor)
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd
2/7
SAFFB876MFL0F0A ( Band26 / Balanced / 5pin / 1109 )
Electrical Characteristic < Single Filter >
Matching Impedance (nominal)
- : Unbalance Port
- : Balance Port
: 50 ohm
: 100 ohm // 47 nH(Ideal inductor)
Characteristics
( -30 to +85 deg.C )
Item
Unit
Note
min. typ. max.
876.5
MHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Center Frequency
Insertion Loss
859.
894.
894.
875.
875.
869.
894.
894.
890.
891.6
891.6
894.
894.
875.
875.
869.
869.
894.
894.
894.
894.
875.
875.
869.
869.
894.
894.
894.
894.
814.
849.
849.
845.
845.
915.
3000.
6000.
2.0
2.0
1.8
1.8
1.8
2.0
2.0
1.6
1.8
1.8
0.7
0.7
0.6
0.6
0.6
0.6
0.7
0.7
1.9
1.9
1.8
1.8
1.8
1.8
1.9
1.9
0.2
182
61
3.3
2.5
2.7
2.2
2.2
3.2
2.2
2.1
2.2
2.1
2.5
1.5
1.9
1.2
1.4
1.2
2.4
1.2
2.3
2.2
2.3
2.2
2.3
2.2
2.3
2.2
0.8
185
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
859.
871.4
871.4
862.
869.
869.
875.
871.4
871.4
859.
859.
860.
860.
862.
862.
869.
869.
859.
859.
860.
860.
862.
862.
869.
869.
859.
859.
1.
+23 to +27deg.C
+23 to +27deg.C
+23 to +27deg.C
Any 3.84MHz +23 to +27deg.C
+23 to +27deg.C
Ripple Deviation
+23 to +27deg.C
+23 to +27deg.C
+23 to +27deg.C
VSWR
+23 to +27deg.C
+23 to +27deg.C
+23 to +27deg.C
+23 to +27deg.C
-0.8
175
50
44
50
50
50
1.5
45
40
dB
deg.
dB
dB
dB
dB
dB
dB
dB
dB
Amplitude Balance
Phase Balance
Absolute Attenuation
814.
814.
815.
815.
900.
979.
3000.
60
60
62
62
9.0
58
51
+23 to +27deg.C,'B26Tx,B18Tx,B5Tx
+23 to +27deg.C,B18Tx,B19Tx
* Typical value at 25±2deg.C
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd
3/7
SAFFB876MFL0F0A ( Band26 / Balanced / 5pin / 1109 )
Electrical Characteristic
< Single Filter >
Narrow-Segment
Ssd13(Ssd12) 1dB/div
Sds31(Ssd21) 10dB/div
START 750.00 MHz
STOP 950.00 MHz
Wide-Segment
Ssd13(Ssd12) 1dB/div
Sds31(Ssd21) 10dB/div
START .10 MHz
STOP 8000.00 MHz
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd
4/7
SAFFB876MFL0F0A ( Band26 / Balanced / 5pin / 1109 )
Dimensions of Tape & Reel
unit: mm
Carrier Tape
A: 8.0
B: 1.75
C: 3.50
D: 4.0
E: 2.00
F: 2.0
J:
1.05
K: 1.25
L: 0.55
G: φ1.5
H: 0.75
Tape
160 min.
Trailer tape
Components
Cover tape
80~280
Leader Cavity
400~560
Unit: mm
Reel
φ178Reel
φ330Reel
A: -
B: -
A: φ13.0
B: 13.5max
C: 9.0
C: -
D: φ60
D: -
E: -
E: φ178
SAFFB876MFL0F0AR1X… 10000pcs (φ178)
SAFFB876MFL0F0AR15… 5000pcs (φ178)
SAFFB876MFL0F0AR1S… sample Order (φ178)
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd
5/7
SAFFB876MFL0F0A ( Band26 / Balanced / 5pin / 1109 )
Marking Code
Table A: Month Code
Table B: Date Code
date
code
date
code
date
code
1st
A
11th
L
2nd
B
12th
M
3rd
C
13th
N
4th
D
14th
P
24th
Z
5th
E
15th
Q
25th
a
6th
F
16th
R
26th
b
7th
G
17th
S
27th
c
8th
H
18th
T
28th
d
9th
J
19th
U
29th
e
10th
K
20th
V
30th
f
21st 22nd 23rd
31st
g
W
X
Y
Important Notice (1/2)
PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS.
Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the
specifications of our product when our product is mounted to your product.
All the items and parameters in this product specification/datasheet/catalog have been prescribed on the
premise that our product is used for the purpose, under the condition and in the environment specified in
this specification. You are requested not to use our product deviating from the condition and the
environment specified in this specification.
Please note that the only warranty that we provide regarding the products is its conformance to the
specifications provided herein. Accordingly, we shall not be responsible for any defects in products or
equipment incorporating such products, which are caused under the conditions other than those specified
in this specification.
WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF
INTELLECTUAL PROPERTY RIGHTS.
The product shall not be used in any application listed below which requires especially high reliability for the
prevention of such defect as may directly cause damage to the third party's life, body or property. You
acknowledge and agree that, if you use our products in such applications, we will not be responsible for any
failure to meet such requirements.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd
6/7
SAFFB876MFL0F0A ( Band26 / Balanced / 5pin / 1109 )
Important Notice (2/2)
Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL
CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT
LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH
APPLICATIONS.
- Aircraft equipment.
- Aerospace equipment
- Undersea equipment.
- Power plant control equipment
- Medical equipment.
- Transportation equipment (vehicles, trains, ships, elevator, etc.).
- Traffic signal equipment.
- Disaster prevention / crime prevention equipment.
- Burning / explosion control equipment
- Application of similar complexity and/ or reliability requirements to the applications listed in the above.
We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing
our product. Our product cannot be used for the product which is prohibited from being manufactured, used,
and sold by the regulations and laws in the world.
We do not warrant or represent that any license, either express or implied, is granted under any our patent right,
copyright, mask work right, or our other intellectual property right relating to any combination, machine, or
process in which our products or services are used. Information provided by us regarding third-party products or
services does not constitute a license from us to use such products or services or a warranty or endorsement
thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from us under our patents or other intellectual property.
Please do not use our products, our technical information and other data provided by us for the purpose of
developing of mass-destruction weapons and the purpose of military use.
Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration
regulations", etc.
Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of
materials and/or components from our suppliers.
Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged
defect of Products only at the level required for consumer grade Products, and thus such analysis may not always
be available or be in accordance with your request (for example, in cases where the defect was caused by
components in Products supplied to Murata from a third party).
The product shall not be used in any other application/model than that of claimed to Murata.
Customer acknowledges that engineering samples may deviate from specifications and may contain defects due
to their development status.
We reject any liability or product warranty for engineering samples.
In particular we disclaim liability for damages caused by
・the use of the engineering sample other than for evaluation purposes, particularly the installation or
integration in the product to be sold by you,
・deviation or lapse in function of engineering sample,
・improper use of engineering samples.
We disclaim any liability for consequential and incidental damages.
If you can’t agree the above contents, you should inquire our sales.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd
7/7
相关型号：
©2020 ICPDF网 联系我们和版权申明