SARCC433M92BXP0R05 [MURATA]
1-Port Saw Resonator, 433.92MHz Nom, CERAMIC, 6 PIN;型号: | SARCC433M92BXP0R05 |
厂家: | muRata |
描述: | 1-Port Saw Resonator, 433.92MHz Nom, CERAMIC, 6 PIN |
文件: | 总18页 (文件大小:310K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
SAW Resonators
SURFACE
ACOUSTIC
WAVE
RESONATORS
Mu ra ta
Ma nu fa cturin g Co., Ltd .
Cat.No.P36E
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
CONTENTS
Part Numbering
2
3
Applications and Data of SAW Resonator
SARCC Series
5
Oscillation Circuit
7
Actual measurments of SAW Oscillator
Keyless Entry System
9
15
16
Packaging/Notice
Recycled Paper
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein.
If you have any questions about details, inquire at your usual Murata sales office or distributor.
o Part Numbering
(
)
SAW Resonators
(Global Part Number)
M
0
R05
SA
R
CC 433M92
B
X
q
w
e
r
t
y
u
i
o
qProduct ID
yBoard
Code
Product ID
Board
SA
SAW
Crystal
X
wFunction
uResonant Frequency Tolerance
Code
Function
Resonant Frequency Tolerance
Code
L
R
Resonator
±50kHz
±75kHz
±100kHz
M
eStructure/Size
P
Code
Structure/Size
Package (SC33 package)
CC
iCustomer Code
Expressed by a figure.
rResonant Frequency
Expressed by six-digit alphanumerics. The unit is in hertz (Hz). A
decimal point is expressed by the capital letter "M".
oPackaging
Packaging
Code
R12
R05
tDesign
2000pcs. /ø178mm Reel
5000pcs. /ø330mm Reel
Code
Design
B
1 port
2
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Applications and Data of SAW Resonator
■ Application
SAW RESONATER has generally 2 types of 1-port type and
2-port type.
1-port SAW RESONATOR is basically a 2 terminal device
and its application is similar to that of quartz bulk wave
resonator or ceramic resonator. Most of the application
circuit is Colpitts or similar type that can be made with low
cost. 1-port SAW RESONATOR is also applicable to VCO
(Voltage Controlled Oscillator) application.
2-port SAW RESONATOR is a kind of very narrow, low loss
band-pass filter. Oscillation circuit is mostly like a RF
amplifier with feedback loop.
SARCC series is 1-port SAW RESONATOR. Later
application data is oscillation circuit by 1-port SAW
RESONATOR.
■ Basic structure of 1-port SAW RESONATOR
1-port SAW RESONATOR has one IDT (Inter Digital
Transducer), which generates and receives SAW, and two
grating reflectors, which reflect SAW and generate a
standing wave between the two reflectors. IDT and
reflectors are fabricated on quartz crystal substrate by
photolithographic process. Cut angle of the substrate shall
be selected carefully. SAW RESONATOR chip is
encapsuled in a ceramic package.
SAW
IDT
REFLECTOR
■ Test Circuit
4
Rg
3
2
1
5
6
RF
Voltmeter
V1
S.S.G.
Ri
■ Transmission Characteristics of 1-port SAW RESONATOR
SARCC315M00BXM0
SARCC433M92BXM0
0
0
10
20
30
40
50
60
70
Amplitude
Amplitude
5 dB/cm
10
20
5 dB/cm
30
40
50
60
70
180
90
0
180
90
0
Phase
Phase
90
90
180
180
314.50
314.70
314.90
315.10
315.30
315.50
433.42
433.62
433.82
434.02
434.22
434.42
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
3
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Applications and Data of SAW Resonator
Continued from the preceding page.
■ Temperature Characteristics of 1-port SAW RESONATOR
SARCC315M00BXM0
SARCC433M92BXM0
50
0
50
0
-50
-50
-100
-150
-200
-100
-150
-200
-60
-40
-20
0
20
40
60
80
100
120
-60
-40
-20
0
20
40
60
80
100
120
Temperature (˚C)
Temperature (˚C)
4
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
1
SAW Resonators
SARCC Series
3.0±0.2
Dot Marking(ø0.5)
SAW Resonator utilizes Surface acoustic Wave, and is
able to be applied to high frequency circuit where
conventional crystal, ceramic resonators are not
available, as SAW Resonator oscillates stably with its
fundamental mode over frequency range from 50 MHz to
around 1 GHz.
M
(0.20)
Marking : Laser Printing
: EIAJ Code
(3)
(4)
(5)
(6)
Murata SAW Resonator - SARCC series - has high
stability, good temperature characteristics provided
by quartz crystal substrate and is developed with SAW
technology accumulated for SAW filters through
Murata's long experience.
(2)
(1)
Pin
(2)(5) : Input
Others : Ground
0.75±0.20
1.50±0.20
5-0.75±0.20
0.75±0.10
(in mm)
SAW Resonator can be applied to many types of high
frequency devices including RF remote controls,
CATV FSK demodulators and CATV 2nd local oscillators.
■ Features
1. High Oscillation Frequency Stability
Both initial tolerance and temperature coefficient
of oscillating frequency of SAW Resonator are
between quartz bulk resonator's and LC's / RC's.
Temperature coefficient of oscillating frequency
for quartz crystal :
10**-6/degree C, LC : 10**-3-10**-4/dgree C,
while SAW Resonator : 5x10**-6/dgree C.
(The number following ** means multiplier.)
2. Adjustment Free
As SAW Resonator utilizes mechanical vibration of
piezoelectric material, while LC/RC utilizes
electrical resonance, oscillator using
SAW Resonator is stable against peripheral circuit
or supply voltage fluctuation, and is basically
free from adjustment.
3. Simple/Low Cost Circuit by Fundamental Oscillation
Multiplying circuit necessary for quartz bulk wave
resonator is not required as SAW Resonator
oscillates with its fundamental mode over the
frequency range of 50 MHz to 1 GHz. Therefore,
oscillation circuit is simple and low cost.
4. Quartz Crystal Substrate
SARCC series realizes better temperature
characteristics, higher stability against
peripheral circuit, by utilizing quartz crystal
substrate, compared to SAW Resonators with other
materials.
5. Small Size Package
SARCC series use small size ceramic package with
3.0x3.0x1.15mm. This is good for high density mount.
6. They can be applied Corpitts Oscillator circuit.
7. Components do not contain lead.
5
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Resonant Loss
(dB)
Resonant Frequency
(MHz)
Parallel Capacitance (at 1MHz)
(pF)
Part Number
1
SARCC304M30BXL0
SARCC304M30BXM0
SARCC304M30BXP0
SARCC315M00BXL0
SARCC315M00BXM0
SARCC315M00BXP0
SARCC423M22BXL0
SARCC423M22BXM0
SARCC423M22BXP0
SARCC433M87BXL0
SARCC433M87BXM0
SARCC433M87BXP0
SARCC433M92BXL0
SARCC433M92BXM0
SARCC433M92BXP0
SARCC434M15BXL0
SARCC434M15BXM0
SARCC434M15BXP0
2.2 max.
2.2 max.
2.2 max.
2.2 max.
2.2 max.
2.2 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
2.5 max.
304.300
304.300
304.300
315.000
315.000
315.000
423.220
423.220
423.220
433.870
433.870
433.870
433.920
433.920
433.920
434.150
434.150
434.150
2.4
2.4
2.4
2.4
2.4
2.4
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
Operating Temperature Range: -40 to +85 dgree C, Storage Temperature Range: -40 to +85 dgree C.
■ Equivalent Circuit
■ Recommended Land Pattern
L1
C1
C0
R1
2.0
1.4
Part Number
L1 (µH)
164.495
159.331
110.088
92.747
C1 (pF)
0.001663
0.001602
0.001284
0.001451
0.001394
0.00141
R1 (Ω)
22.0
22.0
22.2
20.2
22.1
20.0
C0 (pF)
2.37
SARCC304M30BX_0
SARCC315M00BX_0
SARCC423M22BX_0
SARCC433M87BX_0
SARCC433M92BX_0
SARCC434M15BX_0
2.25
2.00
2.00
96.529
2.112
1.97
4.0
95.288
(in mm)
6
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Oscillation Circuit
1
■ Theory of Oscillation Circuit
Oscillation circuits using LC or quartz crystal are called
'Feedback Oscillators'. Feedback oscillator consists of an
amplifier and a feedback circuit.
Amplifier
Gain:α
Phase delay:θ1
The circuit oscillates, with no input signal applied from
outside of the oscillator, when feedback signal from the
output of the amplifier has the same amplitude and phase to
the input signal. The conditions required to the feedback to
enable oscillation are as follows;
Feedback Circuit
Gain:β
Phase delay:θ2
Amplitude : G = α + β U 0 [dB]
Phase : θ = θ1 + θ2 = 360 x n [degree]
(n: Natural number)
1-port SAW RESONATOR is a kind of two terminal resonant
device utilizing piezoelectricity, like quartz crystal bulk wave
resonator or ceramic resonator. The equivalent circuit of
1-port SAW RESONATOR is same to that of quartz or
ceramic resonator, and therefore, impedance characteristics
of SAW RESONATOR is as shown in Fig.1.
1. Fig. 1 Impedance Characteristics of 1-port SAW RESONATOR
SARCC315M00BXM0
SARCC433M92BXM0
Fr Fa
Fr
Fa
Cor
Cor
Hid
Cor
Hid
Hid
Cor
Hid
CENTER 315.000 000 MHz
SPAN 1.000 000MHz
CENTER 433.920 000 MHz
SPAN 1.000 000MHz
2. Basic Structure of Corpitts Oscillator
Colpitts is one of the popular oscillation circuits. Basic
structure of Colpitts oscillator is as shown in Fig.2. The
oscillating frequency is approximately same to resonant
frequency of L, CL1 and CL2.
Fig. 2. Corpitts Oscillator Circuit.
fosc = 1 / (2 π ( L x CL1 x CL2 / ( CL1 + CL2 ))1/2)
CL2
CL1
L
Continued on the following page.
7
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Oscillation Circuit
1
Continued from the preceding page.
3. Example of 1-port SAW Oscillator
Fig. 3. 1-port SAW Oscillator Circuit
In the case of an oscillation circuit using piezo resonator, the
inductor in Fig.2 can be replaced by the resonator because
its impedance is inductive between fr (impedance minimum)
and fa (impedance maximum) as shown in Fig.1.
Fig.3 shows an example of oscillation circuit using 1-port
SAW RESONATOR. Rb1 and Rb2 are for DC bias. Re is a
load impedance. Cd is for power line de-coupling. CL1 and
CL2 are load capacitance to satisfy oscillation conditions.
Values of CL1 and CL2 must be evaluated to get desired
oscillating frequency.
Vcc
Rb2
Cd
Tr
CL1
Co
Out
SAW
Rb1
CL2
Re
Transistor shall be a high frequency type - fT a few GHz or
more.
SMT type transistor, resistor, capacitor are recommended
for application more than 100 MHz due to the inductance of
the lead terminals.
8
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Actual measurments of SAW Oscillator
1
■ 315 MHz 1-port SAW Oscillator
Fig.4 shows an example of oscillator with 1-port SAW
RESONATOR. Here, transistor is 2SC4228(NEC), SAW
RESONATOR is SARCC315M00BXL0 (315.00 MHz
resonator).
Supply voltage (Vcc) characteristics and temperature
characteristics are shown in Fig.6. CL1, CL2, Co and Re
characteristics are shown in Fig. 7 ti Fig. 10.
Tr: 2SC4228
SAW: SARCC315M00BXL0
Rb1=Rb2=2kΩ
Re=160Ω
CL1=12pF GRM18821CH120JA01B
CL2=8pF GRM1882C2D8RDV01B
Co=2pF GRM1884C1H2R0CZ01B
Fig. 4 Oscilltor Circuit
Fig. 5 Land Pattern
Vcc
Output
Co
Rb2
Cd
CL2
Re
0Ω
Tr
Tr
CL1
Vcc
Rb2
Rb1
0Ω
CL1
Co
Cd
Out
SC
SAW
SAW
Rb1
CL2
Re
25mm
1. Fig. 6 Vcc Characteristics
Frequency
Output Power
315.020
315.000
314.980
314.960
314.940
0
-40°C
0°C
-40°C
-5
0°C
-10
25°C
60°C
85°C
25°C
-15
60°C
-20
-25
85°C
0
2
4
6
8
0
2
4
6
8
Vc (V)
Vc (V)
Current Consumption
Rise Time
20
15
10
5
1000
800
600
400
200
0
-40°C
-40°C
0°C
0°C
25°C
60°C
85°C
25°C
60°C
85ºC
0
0
2
4
6
8
0
2
4
6
8
Continued on the following page.
9
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Actual measurments of SAW Oscillator
1
Continued from the preceding page.
2. Fig. 7 CL1 Characteristics
Frequency
Output Power
315.030
315.025
315.020
315.015
315.010
315.005
315.000
-10
-15
-20
-25
-30
6
8
10
12
14
16
6
8
10
12
14
16
CL1 (pF)
CL1 (pF)
Current Consumption
Rise Time
8
7
6
5
4
3
2
2000
1500
1000
500
0
6
8
10
12
14
16
6
8
10
12
14
16
CL1 (pF)
CL1 (pF)
3. Fig. 8 CL2 Characteristics
Frequency
Output Power
315.030
315.025
315.020
315.015
315.010
315.005
315.000
-10
-15
-20
-25
-30
4
6
8
10
12
14
4
6
8
10
12
14
CL2 (pF)
CL2 (pF)
Current Consumption
Rise Time
8
7
6
5
4
3
2
2000
1500
1000
500
0
4
6
8
10
12
14
4
6
8
10
12
14
CL2 (pF)
CL2 (pF)
Continued on the following page.
10
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Actual measurments of SAW Oscillator
1
Continued from the preceding page.
4. Fig. 9 Co Characteristics
Frequency
Output Power
315.030
315.025
315.020
315.015
315.010
315.005
315.000
-10
-15
-20
-25
-30
0
1
2
3
4
5
0
1
2
3
4
5
Co (pF)
Co (pF)
Current Consumption
Rise Time
8
7
6
5
4
3
2
2000
1500
1000
500
0
0
1
2
3
4
5
0
1
2
3
4
5
Co (pF)
Co (pF)
5. Fig. 10 Re Characteristics
Frequency
Output Power
315.030
315.025
315.020
315.015
315.010
315.005
315.000
-10
-15
-20
-25
-30
0
150
200
250
100
150
200
250
Re (ohm)
Re (ohm)
Current Consumption
Rise Time
8
7
6
5
4
3
2
2000
1500
1000
500
0
100
150
200
250
100
150
200
250
Re (ohm)
Re (ohm)
Continued on the following page.
11
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Actual measurments of SAW Oscillator
1
Continued from the preceding page.
■ 433.92 MHz 1-port SAW Oscillator
Fig. 11 shows an example of oscillator with 1-port SAW
RESONATOR. Here, transistor is 2SC4228(NEC), SAW
RESONATOR is SARCC433M92BXM0 (433.92 MHz
resonator).
Supply voltage (Vcc) characteristics and temperature
characteristics are shown in Fig. 13.
Tr: 2SC4228
SAW: SARCC433M92BXM0
Rb1=Rb2=2kΩ
Re=160Ω
CL1=10pF GRM1882C1H100JA01B
CL2=8pF GRM1882C1H8RD201B
Co=2pF GRM1884C1H2R0CZ01B
Fig. 11 Oscillator Circuit
Fig. 12 Land Pattern
Vcc
Output
Co
Rb2
Cd
CL2
Tr
Re
0Ω
Tr
CL1
Rb1
Vcc
Rb2
Cd
0Ω
CL1
Co
Out
SC
SAW
SAW
Rb1
CL2
Re
25mm
1. Fig. 13 Vcc Characteristics
Frequency
Output Power
434.100
434.050
434.000
433.950
433.900
433.850
433.800
0
-5
-40°C
0°C
-40°C
0°C
-10
-15
-20
-25
-30
-35
25°C
60°C
85°C
25°C
60°C
85°C
0
2
4
6
8
0
2
4
6
8
Vc (V)
Vc (V)
Current Consumption
Rise Time
20
15
10
5
500
400
300
200
100
0
-40°C
-40°C
0°C
0°C
25°C
60°C
85°C
25°C
60°C
85ºC
0
0
2
4
6
8
0
2
4
6
8
Vc (V)
Vc (V)
Continued on the following page.
12
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Actual measurments of SAW Oscillator
1
Continued from the preceding page.
2. Fig. 14 CL1 Characteristics
Frequency
Output Power
434.040
434.035
434.030
434.025
434.020
434.015
434.010
-10
-15
-20
-25
-30
4
6
8
10
12
14
16
4
6
8
10
12
14
16
CL1 (pF)
CL1 (pF)
Current Consumption
Rise Time
8
7
6
5
4
3
2
1000
800
600
400
200
0
4
6
8
10
12
14
16
4
6
8
10
12
14
16
CL1 (pF)
CL1 (pF)
3. Fig. 15 CL2 Characteristics
Frequency
Output Power
434.030
434.025
434.020
434.015
434.010
434.005
434.000
-10
-15
-20
-25
-30
4
6
8
10
12
14
4
6
8
10
12
14
CL2 (pF)
CL2 (pF)
Current Consumption
Rise Time
8
7
6
5
4
3
2
1000
800
600
400
200
0
4
6
8
10
12
14
4
6
8
10
12
14
CL2 (pF)
CL2 (pF)
Continued on the following page.
13
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Actual measurments of SAW Oscillator
1
Continued from the preceding page.
4. Fig. 16 Co Characteristics
Frequency
Output Power
434.030
434.025
434.020
434.015
434.010
434.005
434.000
-10
-15
-20
-25
-30
0
1
2
3
4
5
0
1
2
3
4
5
Co (pF)
Co (pF)
Current Consumption
Rise Time
8
7
6
5
4
3
2
1000
800
600
400
200
0
0
1
2
3
4
5
0
1
2
3
4
5
Co (pF)
Co (pF)
5. Fig. 17 Re Characteristics
Frequency
Output Power
434.030
434.025
434.020
434.015
434.010
434.005
434.000
-10
-15
-20
-25
-30
0
150
200
250
100
150
200
250
Re (ohm)
Re (ohm)
Current Consumption
Rise Time
8
7
6
5
4
3
2
1000
800
600
400
200
0
100
150
200
250
100
150
200
250
Re (ohm)
Re (ohm)
14
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Keyless Entry System
1
RF remote control transmitter and reciver for automotive
security device is getting popular. MURATA SARCC series
are suitable for this application due to the advantage of
adjustment-free (or easy adjustment) and high stability.
Example of application circuit is shown in Fig.18 and Fig.19.
Fig. 18 Transmitter Circuit
Oscillator
Encoder
SAW Resonator
(433.92MHz etc)
Fig. 19 Receiver Circuit
LNA
LNA
DEMOD
SAW Filter
IF Filter
Oscillator
SAW Resonator
(423.22MHz etc)
15
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P36E.pdf 02.8.5
Packaging/Notice
1
4.0±0.1
2.0±0.1
+0.1
-0.0
ø1.5
0.30±0.05
1.25±0.10
4.0±0.1
+0.1
-0.0
ø1.5
Direction of Feed
3° max.
Cover Tape
3.3±0.1
(in mm)
2.0±0.5
2.0±0.5
13.0±0.5
13.5±1.0
17.5 max.
19.5 max.
ø13.0±0.5
ø13.0±0.5
ø178 Reel Dimension
ø330 Reel Dimension
(in mm)
(in mm)
■ Notice (Handling)
1. Mount this component at the position so that stress
by warp or bend of the PCB may not apply to it.
2. It might be a cause of destruction to apply
excessive shock on mounting this component on PCB
when positioning claw, pick-up nozzle, etc of
component placement machine are abraded. Keep
regular maintenance which is instructed on each
machine to prevent from these kinds of troubles.
3. Mount all terminals, or terminal strength might be
degraded.
4. Face this component to PCB.
16
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
P36E.pdf 02.8.5
Note:
1. Export Control
For customers outside Japan
<
>
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
t Medical equipment
u Traffic signal equipment
o Data-processing equipment
r Power plant equipment
y Transportation equipment (vehicles, trains, ships, etc.)
i Disaster prevention / crime prevention equipment
! Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of May 2002. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
He a d O ffice
In te rn a tio n a l Divisio n
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
相关型号:
©2020 ICPDF网 联系我们和版权申明