SFELA10M7DF00-B0 [MURATA]
Ceramic Filters (CERAFIL) for FM Receivers; 陶瓷滤波器（ CERAFIL ）的FM接收器
| 型号： | SFELA10M7DF00-B0 |
| 厂家： | 
muRata |
| 描述： | Ceramic Filters (CERAFIL) for FM Receivers |
| 文件： | 总57页 (文件大小：981K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAMIC
FILTERS
(CERAFILr)
Mu ra ta
Ma nu fa cturin g Co., Ltd .
Cat.No.P61E-7
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
1
2
CONTENTS
CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
Part Numbering
2
3
1
CERAFILr Chip Type SFECV Series
Chip CERAFILr SFECV Series Notice
CERAFILr Small Chip Type SFECS Series
Chip CERAFILr SFECS Series Notice
CERAFILr Standard Lead Type
CERAFILr Low-loss Type
3
6
2
7
4
10
11
14
17
20
23
25
28
33
36
37
38
41
42
44
45
49
50
53
54
3
4
5
5
CERAFILr Low-profile Type
6
6
CERAFILr Lower Spurious Response Type
CERAFILr Wider Band-width Type
CERAFILr Narrow Band Type
7
7
8
9
CERAFILr For FM -IF Tuners
8
10
CERAFILr Three-Elements Type SFTLA Series
Lead Type CERAFILr Test Circuit and Characteristics Data
Lead Type CERAFILr Characteristics Data and Notice
9
11
12
13
Discriminators Chip Type CDACV Series
Chip Type Discriminators CDACV Series Notice
Discriminators Chip Low-profile Type CDSCA Series
Chip Type Discriminators CDSCA Series Notice
Discriminators CDALA Series
10
11
12
13
Lead Type Discriminators Notice
Packaging
Test Circuit of Ceramic Discriminator
Example of Appllied Circuit
Recycled Paper
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein.
If you have any questions about details, inquire at your usual Murata sales office or distributor.
o Part Numbering
(
)
r
CERAFIL for FM
(Global Part Number) SF
E
LA 10M7 FAA0 -R0
q
w
e
r
t
y
qProduct ID
tProduct Specification
Product ID
Product Specification
Code
SF
Ceramic Filters
Four-digit alphanumerics express
pass-bandwidth, center frequency tolerance,
rank, series, others.
FAA0
wOscillation/Numbers of Element
Oscillation/Numbers of Element
2 Elements Thickness Expander mode
3 Elements Thickness Expander mode
Code
yPackaging
E
T
Packaging
Bulk
Code
-B0
-R0
-R1
-A0
-A1
2 Elements Thickness Expander mode
(2nd Harmonic)
K
V
Plastic Taping ø180mm
Plastic Taping ø330mm
1500pcs. /Radial Taping H0=18mm
1000pcs. /Radial Taping H0=18mm
2 Elements Thickness Expander mode
(3rd Over Tone)
eStructure/Size
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, two-digit alphanumerics indicating
Structure/Size
Lead Type
Code
Lp
"Individual Specification" is added between " Product Specification"
t
and " Packaging".
y
Chip Type
Cp
is expressed "A" or subsequent code, which indicates the size.
p
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
Discriminators for FM
(Global Part Number) CD
A
LA 10M7 GA 001 -R0
q
w
e
r
t
y
u
qProduct ID
tProduct Specification
Product ID
Product Specification
Code
CD
Discriminators
Two-digit alphanumerics express
type, center frequency, rank, others
GA
wOscillation
yIC
Oscillation
Code
Thickness Expander mode
IC
A
Code
Applicable IC Control Code
001
eStructure/Size
uPackaging
Structure/Size
Lead Type
Code
Lp
Packaging
Bulk
Code
-B0
-A0
-R0
-R1
Chip Type
Cp
is expressed "A" or subsequent code, which indicates the size.
p
Radial Taping H0=18mm
Plastic Taping (ø180mm)
Plastic Taping (ø330mm)
rNominal Center Frequency
Expressed by four-digit alphanumerics . The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between " IC" and " Packaging".
y
u
2
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
1
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Chip Type SFECV Series
6.9±0.3
1.2±0.3
4.05±0.4
SFECV10M7 series for FM-receivers are monolithic type
1.2±0.5
1.5±0.2
1.2±0.5
ceramic filters which utilize the energy trapped
thickness vibration-mode of the piezoelectric ceramic.
By taking advantage of the very low profile, new SFECV
series and PFWCC(kHz filter for AM receiver) enable
costomers to make AM/FM set so thin, and it can be of
help to the total chip circuit.
*
*ꢀ
*
(3)
(2)
(1)
Bottom Electrode
Side Electrode
: Marking
(1) : Input
(2) : Ground
(3) : Output
1.0±0.5
1.0±0.5
1.0±0.5
■ Features
1. Super-thin. Only 1.5mm. The most suitable ceramic
filter available for thinning substrates.
2. Heat resistant. Reflow soldering can be performed
because of its excellent heat resistance.
3. Piezoelectric element is connected in the
sandwich shape by heat resistant substrate, thus
it has excellent mechanical strength, and it is
suitable for automatic mounting.
** : EIAJ Monthly Code
** : Center Frequency Rank Code
(in mm)
4. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
5. Electrical characteristics are the same as
conventional "CERAFIL".
■ Applications
1. Small, thin radios
2. Automotive radios
3. Headphone steros
Center Frequency (fo)
(MHz)
3dB Bandwidth
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious Attenuation
(dB)
Part Number
(kHz)
SFECV10M7KA00-R0
SFECV10M7JA00-R0
SFECV10M7HA00-R0
SFECV10M7GA00-R0
SFECV10M7FA00-R0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within110 ±30kHz
within150 ±40kHz
within180 ±40kHz
within230 ±50kHz
within280 ±50kHz
320 max.
380 max.
470 max.
510 max.
590 max.
within6.0 ±2.0dB
10.0 max.
35 min.
30 min.
35 min.
35 min.
35 min.
within4.0 ±2.0 dB
within3.5 ±2.0 dB
within3.0 ±2.0 dB
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
3
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Frequency Characteristics
1
SFECV10M7KA00-R0
SFECV10M7JA00-R0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
9.700
70
9.700
10.200
10.700
11.200
11.700
10.200
10.700
11.200
11.700
Frequency (MHz)
Frequency (MHz)
SFECV10M7HA00-R0
SFECV10M7GA00-R0
0
1
2
3
4
5
6
7
5.50
5.00
4.50
4.00
3.50
3.00
2.50
2.00
0
1
2
3
4
5
6.00
5.50
5.00
4.50
4.00
3.50
6
7
3.00
2.50
10.500
10.600
10.700
10.800
10.900
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
Frequency (MHz)
SFECV10M7FA00-R0
0
5.00
4.50
4.00
3.50
3.00
2.50
2.00
1.50
1
2
3
4
5
6
7
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
■ Frequency Characteristics (Spurious)
SFECV10M7KA00-R0
SFECV10M7JA00-R0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
70
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
4
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
1
SFECV10M7HA00-R0
SFECV10M7GA00-R0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
8.700
70
8.700
9.700
10.700
11.700
12.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
SFECV10M7FA00-R0
0
10
20
30
40
50
60
70
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
■ Standard Land Pattern Dimensions
■ Test Circuit
1.2
1.2
1.2
(1): Input
(2): Ground
(3): Output
R1
(1)
(3)
(2)
Rg
RF
Voltmeter
E1
C2
R2
E2
S.S.G.
=-10dBm
1.65
2.85
1.65
2.85
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF Volt Meter)
E1 : S.S.G. S.S.G. Output Voltage
Land
(in mm)
5
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Chip CERAFILr SFECV Series Notice
1
■ Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
5sec.
240
230
Gradual Cooling
150
Time(sec.)
60
30
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of 280±5˚C for 3.0±0.5 seconds.
2. Wash
The component cannot be withstand washing.
■ Notice (Handling)
1. The component will be damaged when an excessive
[Component direction]
stress is applied.
Put the
2. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
component
lateral to the
direction in
which stress
acts.
3. Design layout of components on the PC board to
[Component layout close to board]
minimize the stress imposed on the warp or flexure of the
board.
Perforation
B
Susceptibility to
stress is in the order
of : A>C>B
4. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause
destruction resistance characteristics to lower. To
prevent this, be extremely careful in determining shape
and dimension before designing the circuit board
diagram.
C
A
Slit
5. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
6. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. the use of
solder containing Ag should be done to prevent the
electrode erosion.
7. Do not clean or wash the component as it is not
hermetically sealed.
8. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated well.
9. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in re-flow soldering.
10. Accurate test circuit values are required to measure
electrical characteristics.It may be a cause of mis-
correlation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
6
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Small Chip Type SFECS Series
2
0.7T0.3 0.7T0.3 0.7T0.3
3.45T0.2
1.4T0.1
SFECS10M7 series for FM-receivers are small, high
performance and super thin (1.4mm) filters.
Piezoelectric element is connected in the sandwich
shape by ceramics substrate.
(1) (2)
(4)
(3)
F A
(1.30) (1.30)
Input electrode marker
0-0.3
0-0.3
They have 1.4mm thickness and small mounting area.
(3.5x3.1mm)
W0.3
0.4
Y0.2
0.6T0.3
0.6T0.3
0-0.3
0-0.3
(1) : Input
(2) : Ground
(3) : Float (Signal line)
(4) : Output
(*) : Reference
New SFECS series and PFWCC(kHz filter for AM receiver)
enable customers to make AM/FM set so thin and small
sized.
: EIAJ Monthly Code
(1.35) (1.35)
(in mm)
■ Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.4mm thickness, and have
a small mounting area (3.5x3.1mm) enabling
flexible PCB design.
3. Various bandwidths are available. Select a
suitable type in accordance with the desires
selectivity.
4. Operating temperature range :
-20 to +80 (degree C)
Storage temperature range :
-40 to +85 (degree C)
■ Applications
1. Small, thin radios
2. Headphone stereos
Center Frequency (fo)
(MHz)
3dB Bandwidth
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious Attenuation
(dB)
Part Number
(kHz)
SFECS10M7HA00-R0
SFECS10M7GA00-R0
SFECS10M7FA00-R0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within180 ±40kHz
within230 ±50kHz
within280 ±50kHz
470 max.
510 max.
590 max.
within4.5 ±2.0 dB
within3.5 ±2.0 dB
within3.0 ±2.0 dB
30 min.
30 min.
30 min.
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
7
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Frequency Characteristics
SFECS10M7HA00-R0
SFECS10M7GA00-R0
0
2
5.60
5.40
5.20
5.00
4.80
4.60
4.40
4.20
4.00
3.80
3.60
0
2
5.00
4.80
4.60
4.40
4.20
4.00
3.80
3.60
3.40
3.20
2
4
4
6
6
8
8
10
10
3.00
10.500
10.600
10.700
10.800
10.900
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
SFECS10M7FA00-R0
0
2
4.60
4.40
4.20
4.00
3.80
3.60
3.40
3.20
3.00
2.80
2.60
4
6
8
10
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
■ Frequency Characteristics (Spurious)
SFECS10M7HA00-R0
SFECS10M7GA00-R0
0
10
20
30
40
50
0
10
20
30
40
50
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
SFECS10M7FA00-R0
0
10
20
30
40
50
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
8
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Standard Land Pattern Dimensions
■ Test Circuit
(3)
(2)
R1
(4)
(1)
(4)
2
Rg
E1
R2
C2
E2
RF
Voltmeter
S.S.G.
=-10dBm
(1)
(2)
(3)
0.1
0.1
Rg=50Ω
(1) : Input
R1=280Ω
R2=330Ω
C2=10pF
(2) : Ground
(3) : Float
(4) : Output
0.8 0.6 0.8 0.6 0.8
(1) : Input (2) : Ground (3) : Float Signal Line (4) : Out put
It shows solder resist land pattern.
(Including stray capacitance
and Input capacitance of RF Voltmeter)
(in mm)
9
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Chip CERAFILr SFECS Series Notice
■ Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
2
Peak
(240˚C max.)
240
200
Heating
(200˚C)
Pre-heating
(120-170˚C)
100
Gradual
Cooling
30 sec.
min.
30 sec.
max.
120 sec.
min.
60-120 sec.
(2) Soldering Iron
Filter shall be soldered at 280±5˚C for 3.0±0.5 seconds.
The soldering iron shall not touch the filter white soldering.
2. Wash
The component cannot be withstand washing.
■ Notice (Handling)
1. The component will be damaged when an excessive
[Component layout close to board]
stress is applied.
2. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
Perforation
A
B
Susceptibility to
stress is in the order
of : A>C>B
C
Slit
3. Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of the
board.
4. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremly careful in determining shape and dimension
before designing the circuit board diagram.
5. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
6. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. The use
of solder containing Ag should be done to prevent the
electrode erosion.
7. Do not clean or wash the component as it is not
hermetically sealed.
8. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated well.
9. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in re-flow soldering.
10. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of mis-correlation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
10
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Standard Lead Type
7.0±2.0
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
M A R K I N G
3
E I A J
C O D E
1.38±0.2
1.7±0.1
■ Features
1. These miniature filters have high mechanical
0.5±0.1
strength.
2.5±0.2 2.5±0.2
2. Low loss, favorable waveform symmetry, and high
(1) : Input
(2) : Ground
(3) : Output
selectivity.
SFELA10M7HA00-B0
SFELA10M7GA00-B0
SFELA10M7FA00-B0
3. Various band widths are available for applications
in wide to narrow bands.
(in mm)
(3)
(2)
(1)
4. Small dispersion and stable characteristics.
5. Change in center frequency is typically within
±30ppm/(degree C) at -20 to +80 (degree C).
6. High reliability.
7.0±2.0
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(3)
(2)
(1)
7.0±2.0
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(3)
(2)
(1)
Center Frequency (fo)
(MHz)
3dB Bandwidth
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious Attenuation
(dB)
Part Number
(kHz)
SFELA10M7HA00-B0
SFELA10M7GA00-B0
SFELA10M7FA00-B0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within180 ±40kHz
within230 ±50kHz
within280 ±50kHz
520 max.
570 max.
650 max.
7.0 max.
40 min.
40 min.
30 min.
within4.0 ±2.0dB
within4.0 ±2.0dB
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
11
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
3
■ Frequency Characteristics
SFELA10M7HA00-B0
SFELA10M7GA00-B0
0
1
2
3
4
5
6
7
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.50
0
1
2
3
4
5
6
7
5.50
5.00
4.50
4.00
3.50
3.00
2.50
2.00
10.500
10.600
10.700
10.800
10.900
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
SFELA10M7FA00-B0
0
1
2
3
4
5
6
7
5.00
4.50
4.00
3.50
3.00
2.50
2.00
1.50
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
■ Frequency Characteristics (Spurious)
SFELA10M7HA00-B0
SFELA10M7GA00-B0
0
0
10
20
30
40
50
60
70
10
20
30
40
50
60
70
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
12
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFELA10M7FA00-B0
0
10
20
30
40
50
60
70
3
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
■ Spurious Response
SFELA10M7FA00-B0
0
10
20
30
40
50
60
70
0
20
40
60
80
100
Frequency (MHz)
13
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Low-loss Type
7.0±2.0
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
■ Features
1. Insertion loss is 1 to 1.5dB lower than
conventional products. This types are useful for
elevating the sensitivity of sets.
4
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
2. Small dispersion and stable characteristics.
3. Excellent shape factor of frequency response.
4. Good waveform symmetry.
SFELA_JAA0-B0
SFELA_HAA0-B0
SFELA_FAA0-B0
(in mm)
(3)
(2)
(1)
7.0±2.0
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
(in mm)
(3)
(2)
(1)
7.0±2.0
7.0±2.0
M A R K I N G
M A R K I N G
E I A J
C O D E
E I A J
C O D E
1.38±0.2
1.7±0.1
1.38±0.2
1.7±0.1
0.5±0.1
0.5±0.1
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
(1) : Input
(2) : Ground
(3) : Output
SFELA_GAA0-B0
(in mm)
(in mm)
(3)
(2)
(1)
(3)
(2)
(1)
Center Frequency (fo)
(MHz)
3dB Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious Attenuation
(dB)
Part Number
SFELA10M7JAA0-B0
SFELA10M7HAA0-B0
SFELA10M7GAA0-B0
SFELA10M7FAA0-B0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within150 ±40kHz
within180 ±40kHz
within230 ±50kHz
within280 ±50kHz
360 max.
470 max.
520 max.
590 max.
within4.5 ±2.0dB
within3.5 ±1.5dB
within3.0 ±2.0dB
within2.5 ±2.0dB
35 min.
35 min.
35 min.
30 min.
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
14
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
■ Frequency Characteristics
4
SFELA10M7JAA0-B0
SFELA10M7HAA0-B0
0
1
2
3
4
5
6
7
6.50
6.00
5.50
5.00
4.50
4.00
3.50
0
1
2
3
4
5
6
7
7.50
7.00
6.50
6.00
5.50
5.00
4.50
4.00
3.00
10.500
10.600
10.700
10.800
10.900
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
SFELA10M7GAA0-B0
SFELA10M7FAA0-B0
0
1
2
3
4
5
6
7
5.50
5.00
4.50
4.00
3.50
3.00
2.50
0
1
2
3
4
5
6
7
6.50
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.00
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
■ Frequency Characteristics (Spurious)
SFELA10M7JAA0-B0
SFELA10M7HAA0-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
Continued on the following page.
15
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFELA10M7GAA0-B0
SFELA10M7FAA0-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
4
16
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Low-profile Type
7.5±2.0
SFELB10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
E I A J
C O D E
M A R K I N G
1.5±0.1
1.3±0.1
■ Features
0.5±0.1
1. Installed height is 5 mm, making it well suited for
compact, thin sets.
2.5±0.2 2.5
±0.2
2. Environmental reliability is the same as those of
(1) : Input
(2) : Ground
(3) : Output
the ceramic filter SFELA10M7 series.
SFELB10M7KA00-B0
SFELB10M7HA00-B0
SFELB10M7FA00-B0
5
in mm
(1)
(2)
(3)
7.5±2.0
7.5±2.0
E I A J
C O D E
E I A J
C O D E
M A R K I N G
M A R K I N G
1.5±0.1
1.3±0.1
1.5±0.1
1.3±0.1
0.5±0.1
0.5±0.1
2.5
±
0.2 2.5
±
0.2
2.5±0.2 2.5
±0.2
(1) : Input
(2) : Ground
(3) : Output
(1) : Input
(2) : Ground
(3) : Output
SFELB10M7JA00-B0
in mm
in mm
(1)
(2)
(3)
(1)
(2)
(3)
7.5±2.0
7.5±2.0
E I A J
C O D E
E I A J
C O D E
M A R K I N G
M A R K I N G
1.5±0.1
1.3±0.1
1.5±0.1
1.3±0.1
0.5±0.1
0.5±0.1
2.5
±
0.2 2.5
±
0.2
2.5±0.2 2.5
±0.2
(1) : Input
(2) : Ground
(3) : Output
(1) : Input
(2) : Ground
(3) : Output
SFELB10M7GA00-B0
in mm
in mm
(1)
(2)
(3)
(1)
(2)
(3)
Center Frequency (fo)
(MHz)
3dB Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious Attenuation
(dB)
Part Number
SFELB10M7KA00-B0
SFELB10M7JA00-B0
SFELB10M7HA00-B0
SFELB10M7GA00-B0
SFELB10M7FA00-B0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within110 ±30kHz
within150 ±40kHz
within180 ±40kHz
within230 ±50kHz
within280 ±50kHz
350 max.
360 max.
470 max.
570 max.
650 max.
within7.0 ±2.0dB
within4.5 ±2.0dB
within3.5 ±2.0dB
within3.0 ±2.0dB
within3.0 ±2.0dB
30 min.
35 min.
35 min.
40 min.
30 min.
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
17
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
■ Frequency Characteristics
SFELB10M7KA00-B0
SFELB10M7JA00-B0
0
1
2
3
4
5
6
7
7.50
7.00
6.50
6.00
5.50
5.00
4.50
0
1
8.00
7.50
5
2
3
7.00
6.50
4
5
6
7
6.00
5.50
5.00
4.50
4.00
10.620
10.660
10.700
10.740
10.780
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
SFELB10M7HA00-B0
SFELB10M7GA00-B0
0
1
2
3
4
5
6
7
6.50
6.00
5.50
5.00
4.50
4.00
3.50
0
1
2
3
4
5
6
7
7.00
6.50
6.00
5.50
5.00
4.50
4.00
3.50
3.00
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
SFELB10M7FA00-B0
0
1
2
3
4
5
6
7
5.50
5.00
4.50
4.00
3.50
3.00
2.50
2.00
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
18
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Frequency Characteristics (Spurious)
SFELB10M7KA00-B0
SFELB10M7JA00-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
70
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
5
SFELB10M7HA00-B0
SFELB10M7GA00-B0
0
0
10
10
20
30
40
50
60
20
30
40
50
60
70
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
SFELB10M7FA00-B0
0
10
20
30
40
50
60
70
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
19
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Lower Spurious Response Type
7.5±2.0
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
MARKING
EIAJ
CODE
1.38±0.2
1.7±0.1
■ Features
1. This type has lower spurious response compared to
0.5±0.1
the standard filters.
2.5±0.2 2.5±0.2
2. This types are suitable for higher spurious
suppression radio.
SFELA10M7KAB0-B0
SFELA10M7HAB0-B0
SFELA10M7FAB0-B0
(3)
(2)
(1)
7.5±2.0
7.5±2.0
6
MARKING
EIAJ
MARKING
EIAJ
CODE
CODE
1.38±0.2
1.7±0.1
1.38±0.2
1.7±0.1
0.5±0.1
0.5±0.1
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
SFELA10M7JAB0-B0
(3)
(2)
(1)
(3)
(2)
(1)
7.5±2.0
7.5±2.0
MARKING
EIAJ
MARKING
EIAJ
CODE
CODE
1.38±0.2
1.7±0.1
1.38±0.2
1.7±0.1
0.5±0.1
0.5±0.1
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
SFELA10M7GAB0-B0
(3)
(2)
(1)
(3)
(2)
(1)
Center Frequency (fo)
(MHz)
3dB Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
Spurious Attenuation
(dB)
Part Number
(dB)
SFELA10M7KAB0-B0
SFELA10M7JAB0-B0
SFELA10M7HAB0-B0
SFELA10M7GAB0-B0
SFELA10M7FAB0-B0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within110 ±30kHz
within150 ±40kHz
within180 ±40kHz
within230 ±50kHz
within280 ±50kHz
350 max.
380 max.
520 max.
570 max.
650 max.
7.0 ±2.0dB
5.5 ±2.0dB
5.0 ±2.0dB
3.0 ±2.0dB
3.0 ±2.0dB
45 min.
45 min.
45 min.
45 min.
45 min.
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
20
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
■ Frequency Characteristics
SFELA10M7KAB0-B0
SFELA10M7JAB0-B0
0
1
2
3
4
5
6
7
7.00
6.50
6.00
5.50
5.00
4.50
4.00
0
1
2
3
4
5
6
7
8.00
7.50
7.00
6.50
6.00
5.50
5.00
4.50
6
3.50
10.620
10.500
10.500
10.660
10.700
Frequency (MHz)
10.740
10.780
10.900
10.900
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
SFELA10M7HAB0-B0
SFELA10M7GAB0-B0
0
1
2
3
4
5
6
7
6.50
6.00
5.50
5.00
4.50
4.00
3.50
3.00
0
1
2
3
4
5
6
7
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.50
10.600
10.700
Frequency (MHz)
10.800
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
SFELA10M7FAB0-B0
0
1
2
3
4
5
6
7
5.00
4.50
4.00
3.50
3.00
2.50
2.00
1.50
10.600
10.700
10.800
Frequency (MHz)
21
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Frequency Characteristics (Spurious)
SFELA10M7KAB0-B0
SFELA10M7JAB0-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
SFELA10M7HAB0-B0
SFELA10M7GAB0-B0
0
0
10
20
30
40
50
60
70
10
20
30
40
50
60
70
6
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
Frequency (MHz)
SFELA10M7FAB0-B0
0
10
20
30
40
50
60
70
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
22
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Wider Band-width Type
7.0±2.0
SFELA10M7 Series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
■ Features
1. Realizes wider or narrower band characteristics not
obtained by conventional ceramic filters.
2. Temperature characteristics are the best available,
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
the same as those of Murata's conventional ceramic
filters. Thus, even in the case of narrow band
filters, the center frequency is stable even if
temperature changes.
SFELA10M7EA00-B0
(in mm)
(3)
(2)
(1)
7.0±2.0
M A R K I N G
E I A J
C O D E
7
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7DF00-B0
(in mm)
(3)
(2)
(1)
Nominal
Center Frequency(fn)
(MHz)
Center Frequency (fo)
(MHz)
3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
Part Number
(kHz)
(kHz)
(dB)
(dB)
SFELA10M7EA00-B0
SFELA10M7DF00-B0
10.700 ±30kHz
-
within330 ±50kHz
fn±175 min.
680 max. within4.0 ±2.0dB
950 max. within3.0 ±2.0dB
30 min.
20 min.
-
10.700
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
(fn) means nominal center frequency.
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
23
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Frequency Characteristics
SFELA10M7EA00-B0
SFELA10M7DF00-B0
0
1
2
3
4
5
6
7
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0
1
2
3
4
5
6
7
4.50
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
10.300
10.500
10.700
10.900
11.100
10.300
10.500
10.700
10.900
11.100
Frequency (MHz)
Frequency (MHz)
■ Frequency Characteristics (Spurious)
SFELA10M7EA00-B0
SFELA10M7DF00-B0
0
0
10
20
30
40
50
60
70
10
20
30
40
50
60
7
70
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
Frequency (MHz)
24
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Narrow Band Type
10.0±2.0
SFELA10M7LFTA/KAH0, SFVLA/SFKLA series realizes
narrower band characteristics not obtained by
conventional ceramic filters. Besides, low spurious
and temperature characteristics is stable. This series
suits for European car-audio or AM up conversion use
that needs narrow band characteristics.
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
SFKLA10M7NF00-B0
in mm
(3)
(2)
(1)
7.0±2.0
7.0±2.0
MARKING
MARKING
EIAJ
CODE
EIAJ
CODE
1.65±0.1
1.65±0.1
1.4±0.1
0.5±0.1
1.4±0.1
0.5±0.1
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
8
(1) : Input
(2) : Ground
(3) : Output
(1) : Input
(2) : Ground
(3) : Output
SFVLA10M7MF00-B0
SFVLA10M7LF00-B0
in mm
in mm
(3)
(2)
(1)
(3)
(2)
(1)
7.0±2.0
7.0±2.0
M A R K I N G
MARKING
E I A J
C O D E
EIAJ
CODE
1.38±0.2
1.7±0.1
1.38±0.2
1.7±0.1
0.5±0.1
0.5±0.1
2.5
2.5
±0.2 ±0.2
2.5±0.2 2.5±0.2
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7LFTA01-B0
SFELA10M7KAH0-B0
(1) Input
(2) Ground
(3) Output
(3)
(2)
(1)
(in mm)
(3)
(2)
(1)
Nominal
Center Frequency(fn)
(MHz)
Center Frequency (fo)
(MHz)
3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
Part Number
(kHz)
(kHz)
(dB)
(dB)
SFKLA10M7NF00-B0
SFVLA10M7MF00-B0
SFVLA10M7LF00-B0
SFELA10M7LFTA-B0
SFELA10M7KAH0-B0
10.700 ±15kHz
-
20 min.
fn±13 min.
95 max.
6.0 max.
24 min.
30 min.
30 min.
30 min.
30 min.
-
10.700
10.700
10.700
-
135 max. within5.5 ±2.5dB
200 max. within5.5 ±2.5dB
280 max. within7.0 ±2.0dB
350 max. within7.0 ±2.0dB
-
fn±25 min.
-
fn±25 min.
10.700 ±30kHz
within110 ±30kHz
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
25
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
■ Frequency Characteristics
SFKLA10M7NF00-B0
SFVLA10M7MF00-B0
0
0
1
19.0
18.0
2
3
17.0
16.0
4
5
6
7
15.0
14.0
13.0
10
10.800
10.750
10.650
10.700
10.600
12.0
10.620
10.660
10.700
Frequency (MHz)
10.740
10.780
Frequency ( kHz )
8
SFVLA10M7LF00-B0
SFELA10M7LFTA01-B0
0
1
13.0
12.0
0
1
2
3
4
5
6
7
8
9
11.00
10.50
10.00
9.50
9.00
8.50
8.00
7.50
7.00
2
3
11.0
10.0
4
5
6
7
9.00
8.00
7.00
6.00
6.50
10.580
10.640
10.700
10.760
10.820
10.620
10.660
10.700
10.740
10.780
Frequency (MHz)
Frequency (MHz)
SFELA10M7KAH0-B0
0
1
2
3
4
5
6
7
8.00
7.50
7.00
6.50
6.00
5.50
5.00
4.50
10.620
10.660
10.700
10.740
10.780
Frequency (MHz)
26
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Frequency Characteristics (Spurious)
SFKLA10M7NF00-B0
SFVLA10M7MF00-B0
0
10
20
30
0
10
20
30
40
50
60
40
50
60
70
70
8.700
11.700
11.200
9.700
10.200
10.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency ( MHz )
SFVLA10M7LF00-B0
SFELA10M7LFTA01-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
80
90
70
8.700
11.200
9.700
10.200
10.700
11.700
9.700
10.700
11.700
12.700
8
Frequency (MHz)
Frequency (MHz)
SFELA10M7KAH0-B0
0
10
20
30
40
50
60
70
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
27
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr For FM -IF Tuners
9.0 max.
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
MARKING
EIAJ
CODE
1.38±0.2
1.7±0.1
■ Features
1. Little dispersion of amplitude characteristics and
phase characteristics (G. D. T. characteristics).
2. The SFELA10M7G_X series has G. D. T characteristics
0.5±0.1
2.5±0.2 2.5±0.2
and is useful for obtaining low distortion.
SFELA10M7F_L series, in these ceramic filters,
being in harmony with flatness of G. D. T. ,
roundness of the amplitude and selectivity
characteristics, therefore, these ceramic filters
are suitable to high-grade stereo tuners. Even if
mismatching condition, they can keep little
distortion because of low Qm of ceramic material.
The SFELA10M7FA0G series is based on
SFELA10M7FA00/GA00/HA00, and it obtains high
selectivity with low loss.
SFELA10M7JAXE-B0
SFELA10M7HA0G-B0
SFELA10M7HAXD-B0
SFELA10M7GALM-B0
(3)
(2)
(1)
7.0±2.0
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
0.5±0.1
There is little dispersion of amplitude and
G. D. T. characteristics, and low distortion rate
can be obtained.
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
3. All products are inspected for symmetry and
roundness of amplitude characteristics, and the
flatness of G. D. T. characteristics.
(in mm)
(3)
(2)
(1)
9
9.0 max.
MARKING
EIAJ
CODE
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
(3)
(2)
(1)
7.0±2.0
7.0±2.0
M A R K I N G
M A R K I N G
E I A J
C O D E
E I A J
C O D E
1.38±0.2
1.7±0.1
1.38±0.2
1.7±0.1
0.5±0.1
0.5±0.1
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
(1) : Input
(1) : Input
(2) : Ground
(3) : Output
(2) : Ground
(3) : Output
SFELA10M7GA0G-B0
(in mm)
(in mm)
(3)
(2)
(1)
(3)
(2)
(1)
Continued on the following page.
28
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
7.0±2.0
9.0 max.
M A R K I N G
MARKING
EIAJ
CODE
E I A J
C O D E
1.38±0.2
1.7±0.1
1.38±0.2
1.7±0.1
0.5±0.1
0.5±0.1
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GAXA-B0
SFELA10M7FA0G-B0
(in mm)
in mm
(3)
(2)
(1)
(3)
(2)
(1)
7.0±2.0
9.0 max.
M A R K I N G
MARKING
EIAJ
CODE
E I A J
C O D E
1.38±0.2
1.38±0.2
1.7±0.1
1.7±0.1
0.5±0.1
0.5±0.1
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7GALP03-B0
SFELA10M7GAXX-B0
(in mm)
in mm
(3)
(2)
(1)
(3)
(2)
(1)
7.0±2.0
M A R K I N G
E I A J
C O D E
1.38±0.2
1.7±0.1
9
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
SFELA10M7FALL-B0
(in mm)
(3)
(2)
(1)
Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
GDT Bandwidth
(kHz)
Part Number
(MHz)
(kHz)
(kHz)
(dB)
(dB)
SFELA10M7JAXE-B0
SFELA10M7HA0G-B0
SFELA10M7HAXD-B0
SFELA10M7GA0G-B0
SFELA10M7GALM-B0
SFELA10M7GAXA-B0
SFELA10M7FA0G-B0
SFELA10M7GALP03-B0
SFELA10M7GAXX-B0
SFELA10M7FALL-B0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within150 ±30kHz 500 max.
within180 ±40kHz 520 max.
within180 ±30kHz 530 max.
within230 ±50kHz 600 max.
14.0 max.
7.0 max.
14.0 max.
7.0 max.
35 min.
40 min.
33 min.
40 min.
30 min.
30 min.
30 min.
30 min.
25 min.
25 min.
fo±50 min.[within 0.15µsec.]
fo±45 min.[within 0.5µsec.]
fo±60 min.[within 0.15µsec.]
fo±60 min.[within 0.5µsec.]
fo±60 min.[within 0.25µsec.]
fo±80 min.[within 0.15µsec.]
fo±85 min.[within 0.5µsec.]
fo±65 min.[within 0.25µsec.]
fo±110 min.[within 0.2µsec.]
fo±70 min.[within 0.25µsec.]
within230 ±50kHz 600 max. within9.0 ±2.0dB
within220 ±40kHz 610 max. 12.5 max.
within280 ±50kHz 650 max. within4.0 ±2.0dB
within250 ±50kHz 650 max.
within250 ±40kHz 670 max.
10.0 max.
12.0 max.
within280 ±50kHz 700 max. within7.0 ±2.0dB
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
29
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
■ Freq. Characteristics
SFELA10M7JAXE-B0
SFELA10M7HA0G-B0
0
1
2
3
4
5
6
7
6.00
5.50
5.00
4.50
4.00
3.50
3.00
0
1
2
3
4
5
6
7
5.00
4.75
4.50
4.25
4.00
3.75
3.50
3.25
2.50
10.500
10.500
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
10.900
10.900
10.500
10.500
10.500
10.600
10.700
Frequency (MHz)
10.800
10.900
SFELA10M7HAXD-B0
SFELA10M7GA0G-B0
0
1
2
3
4
5
6
7
4.50
4.25
4.00
3.75
3.50
3.25
3.00
2.75
0
1
6.00
5.50
2
3
5.00
4.50
9
4
5
6
7
4.00
3.50
3.00
2.50
10.600
10.700
Frequency (MHz)
10.800
10.600
10.700
Frequency (MHz)
10.800
10.900
SFELA10M7GALM-B0
SFELA10M7GAXA-B0
0
1
2
3
4
5
6
7
4.00
3.75
3.50
3.25
3.00
2.75
2.50
2.25
0
1
2
3
4
5
6
7
3.75
3.50
3.25
3.00
2.75
2.50
2.25
2.00
10.600
10.700
10.800
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
30
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ Freq. Characteristics
SFELA10M7FA0G-B0
SFELA10M7GALP03-B0
0
1
2
3
4
5
6
7
3.75
3.50
3.25
3.00
2.75
2.50
2.25
0
1
5.00
4.50
2
3
4.00
3.50
4
5
6
7
3.00
2.50
2.00
1.50
2.00
10.500
10.600
10.700
10.800
10.900
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
SFELA10M7GAXX-B0
SFELA10M7FALL-B0
0
1
2
3
4
5
6
7
3.25
3.00
2.75
2.50
2.25
2.00
1.75
1.50
0
1
2
3
4
5
6
7
3.25
3.00
2.75
2.50
2.25
2.00
1.75
1.50
10.500
10.600
10.700
10.800
10.900
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
■ Spurious Frequency
9
SFELA10M7JAXE-B0
SFELA10M7HA0G-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
9.900
10.300
10.700
11.100
11.500
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
SFELA10M7HAXD-B0
SFELA10M7GA0G-B0
0
0
10
20
30
40
50
60
10
20
30
40
50
60
70
70
8.700
9.700
10.700
11.700
12.700
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
31
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ Spurious Frequency
SFELA10M7GALM-B0
SFELA10M7GAXA-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
8.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
12.700
12.700
9.700
10.700
Frequency (MHz)
11.700
12.700
SFELA10M7FA0G-B0
SFELA10M7GALP03-B0
0
0
10
20
30
40
50
60
10
20
30
40
50
60
70
8.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
9.700
10.700
11.700
Frequency (MHz)
9
SFELA10M7GAXX-B0
SFELA10M7FALL-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
8.700
70
8.700
9.700
10.700
11.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Frequency (MHz)
32
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
CERAFILr Three-Elements Type SFTLA Series
10.0±1.0
SFTLA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
M A R K I N G
E I A J
C O D E
0.4±0.1
■ Features
0.65±0.1
1.4±0.1
0.5±0.1
1. It has an excellent shape factor, and it is
possible to obtain 1.5 times more excellent
selectivity than SFELA10M7 series (by detuning
+-300 or 400kHz).
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
SFTLA10M7HA00-B0
SFTLA10M7GA00-B0
SFTLA10M7FA00-B0
2. Good performance of spurious suppression.
3. Having the same terminal pitch as the SFELA10M7
series, it easily replaces that series.
in mm
(3)
(2)
(1)
10.0±1.0
4. By replacing two SFELA10M7 series filters with one
SFTLA10M7 filter,more compact sets can be made.
5. Well-suited for 1-chip ICs.
M A R K I N G
E I A J
C O D E
0.4±0.1
0.65±0.1
1.4±0.1
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
in mm
(3)
(2)
(1)
10.0±1.0
M A R K I N G
E I A J
C O D E
10
0.4±0.1
0.65±0.1
1.4±0.1
0.5±0.1
2.5±0.2 2.5±0.2
(1) : Input
(2) : Ground
(3) : Output
in mm
(3)
(2)
(1)
Center Frequency (fo)
(MHz)
3dB Bandwidth
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious Attenuation
(dB)
Part Number
(kHz)
SFTLA10M7HA00-B0
SFTLA10M7GA00-B0
SFTLA10M7FA00-B0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
within180 ±40kHz
within230 ±40kHz
within280 ±50kHz
550 max.
650 max.
700 max.
within5.5 ±2.5dB
within6.0 ±2.0dB
within6.0 ±2.0dB
50 min.
50 min.
50 min.
Area of Attenuation : [within 40dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
33
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
■ Frequency Characteristics
SFTLA10M7HA00-B0
SFTLA10M7GA00-B0
0
1
2
3
4
5
6
7
8.00
7.50
7.00
6.50
6.00
5.50
5.00
4.50
0
1
2
3
4
5
6
7
7.00
6.50
6.00
5.50
5.00
4.50
4.00
3.50
10.500
10.600
10.700
10.800
10.900
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
Frequency (MHz)
SFTLA10M7FA00-B0
0
1
2
3
4
5
6
7
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.50
10
10.500
10.600
10.700
10.800
10.900
Frequency (MHz)
■ Frequency Characteristics (Spurious)
SFTLA10M7HA00-B0
SFTLA10M7GA00-B0
0
0
10
20
30
40
50
60
70
10
20
30
40
50
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
Continued on the following page.
34
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics (Spurious)
SFTLA10M7FA00-B0
0
10
20
30
40
50
60
70
8.700
9.700
10.700
11.700
12.700
Frequency (MHz)
10
35
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Lead Type CERAFILr Test Circuit and Characteristics Data
■ Test Circuit
(1) : Input
(2) : Output
(3) :Ground
(1) (2) (3)
R1
RF
Voltmeter
Rg
C
R2
S.S.G
Rg + R1 = R2 = 330Ω
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
■ Temperature Characteristics
W40
W20
0
W40
W20
0
SFELA10M7GA00-B0
SFELA10M7HA00-B0
Center frequency
Center frequency
Y20
Y40
Y20
Y40
Y20
0
0
0
W20
W40
W40
W40
W60
W60
W60
W80
W80
W80
Y20
0
0
0
W20
W40
W40
W40
W60
W60
W60
W80
W80
W80
Temperature (˚C)
Temperature (˚C)
W2
W1
0
W2
W1
0
Insertion loss
Insertion loss
Y1
Y2
Y1
Y2
Y20
W20
Y20
W20
Temperature (˚C)
Temperature (˚C)
W40
W20
0
W40
W20
0
3dB Band width
3dB Band width
Y20
Y40
Y20
Y40
Y20
W20
Y20
W20
Temperature (˚C)
Temperature (˚C)
■ Matching Conditions
•When using ceramic filters, it is most important to
•The SFELA10M7 and SFTLA10M7 series are of
input/output symmetric structure so that in theory
there is no input/output directionality. Actual
circuits may use different input/output loading
conditions (for example, mismatched impedance) or
capacitance load. In such cases, the waveform will
be a little changed by the direction of the
10
match the input/output load to impedance 330 ohm
(only SFELA10M7DF00-B0 is 470 ohm matching).
Waveform symmetry is damaged when reactance
is added to the input/output load.
•Two ceramic filters directly connected can be used
for high selelctivity. For reducing waveform
variation, it is recommended to input a buffer AMP
between ceramic filters.
input/output of the ceramic filters.
36
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Lead Type CERAFILr Characteristics Data and Notice
■ Loaded Resistance and Waveform (Rg+R1=330ohm)
SFELA10M7GA00-B0
R2=220Ω
R2=330Ω
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
R2=560Ω
R2=1kΩ
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
■ Loaded Capacitance and Waveform (Rg+R1=R2=330ohm)
SFELA10M7GA00-B0
C=10pF
C=33pF
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
C=56pF
C=82pF
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
0
1
2
3
4
5
6
7
1.2
1.0
0.8
0.6
0.4
0.2
0
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
■ Notice (Soldering and Mounting)
The component cannot be withstand washing.
10
■ Notice (Handling)
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
will be applied.
chlorine content, in flow soldering.
6. In case of covering discriminator with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated well.
7. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of mis-correlation if there is any deviation,
especially stray capacitance, from the test
circuit in the specification.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
37
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
Discriminators Chip Type CDACV Series
3.4±0.5
1.5±0.3
CDACV10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in wide
bandwidths.
■ Features
0.9±0.3
0.9±0.3
1. Compact and excellent mechanical strength.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be obtained
without adjustment.
: EIAJ Monthly Code
: Rank
in mm
4. The MG type for wide bandwidths and the MC type for
narrow bandwidths are available.
5. Stable temperature characteristics.
6. We recommend kits : ceramic discriminator
CDACV10M7 series and "CERAFIL" SFECV10M7 of the
same frequency rank.
Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion
Part Number
IC
Detection Method
(MHz)
(kHz)
(mV)
(% )
CDACV10M7GA001-R0
CDACV10M7GA016-R0
CDACV10M7GA046-R0
CDACV10M7GA069-R0
CDACV10M7CA001-R0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
fo±150 min.
300 min.
55 min.
within60 to 90mV
280 min.
1.0 max. CX20029
0.9 max. TA8122F
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
330 min.
1.5 max.
LA1832
330 min.
80 min.
1.0 max. CXA1538N
1.0 max. CX20091
fo±150 min.
55 min.
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
11
Combination A,B,C,D,E
Combination A,B,C
M
■ Standard Land Pattern Dimensions
1.5
1.5
1.4
1.5
1.4
38
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ CDACV10M7GA001-R0
Test Circuit
Frequency Characteristics
1000
100
AFC
REF
5
33
1µ
0.01µ
280
AF OUTPUT
32
+
–
39
100
10
CX20029
28
AF Output
9
S.S.G.
Vcc=+3.0V
10
1
Unit
R : Ω
C : F
Distortion
1
0.1
Input signal conditions
Input Level
Mod. Freq.
Freq.Dev.
100dBµ
1000Hz
±22.5kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0
Frequency (MHz)
■ CDACV10M7GA016-R0
Test Circuit
Frequency Characteristics
1000
100
VCC +3V
DC Out AF Out
+
24 23 22 21 20 19 18 17 16 15 14 13
TA8122F (TOSHIBA)
100
10
AF Output
1
2
3
4
5
6
7
8
9 10 11 12
+
CDACV10M7GA016
10
1
SFELA10M7DF00
IF in
Distortion
Unit
R : Ω
C : F
1
0.1
Input signal conditions
Input Level
Mod. Freq.
Freq.Dev.
80dBµ
1000Hz
±22.5kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
11
■ CDACV10M7GA046-R0
Test Circuit
Frequency Characteristics
AF OUT
1000
100
CSBLA456KE2ZF15 0.01µ
1200p
AF Output
5.6k
0.047µ
0.01µ
1µ
+
22µ
+
AFC
+
+
1µ
3.3µ
24 23 22 21 20 19 18 17 16 15 14 13
100
10
6.8k
LA1832 (SANYO)
1
2
3
4
5
6
7
8
9
10 11 12
300
75
270
3k
2.2µ
0.047µ
CDALA10M7GA046
Distortion
IF-IN
1µ
+
10µ
0.047µ
10
1
+
100µ
Unit
R : Ω
C : F
REG
Vcc (5V)
1
0.1
Input signal conditions
Input Level
Mod. Freq.
Freq.Dev.
112dBµ
1000Hz
±75kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
Continued on the following page.
39
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ CDACV10M7GA069-R0
Test Circuit
Frequency Characteristics
VCC (3V)
CDACV10M7GZ069-B0
Reg
1000
100
10
100
3.3µ
2.2k
+
100
10µ
0.01µ
+
10µ
+
AF Output
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
10
CXA1538N
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
100 µ
0.01µ
+
1µ
0.01µ 0.01µ
+
+
+
+
AF OUT
1
Distortion
VCC (3V)
3.3k
AFC
IF IN
0.022µ
3.3k
Unit
R : Ω
C : F
0.022µ
0.1
1
Input signal conditions
Input Level
Mod.Freq.
Freq.Dev.
100dBµ
1000Hz
±75kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
■ CDACV10M7CA001-R0
Test Circuit
Frequency Characteristics
Vcc 3V
AF OUT
AFC OUT
INPUT
10
1000
100
10
S.S.G.(Rg=50)
+
+
+
+
10
28
27
26
25
24
23
22
21
20
19
18
11
17
12
16
13
15
14
AF Output
CX20091 (SONY)
1
2
3
4
5
6
7
8
9
10
1
+
Distortion
Unit
R : Ω
C : F
REG OUT
CDACV10M7CZ001-B0
0.1
1
Input signal conditions
Input Level
Mod.Freq.
Freq.Dev.
100dBµ
10.4
10.5
10.6
10.7
10.8
10.9
11.0
1000Hz
Frequency (MHz)
±22.5kHz
11
40
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Chip Type Discriminators CDACV Series Notice
■ Notice (soldering and mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
5sec.
240
230
Gradual
Cooling
150
60
30
Time (sec.)
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of 280±5˚C for 3.0±0.5 seconds.
2. Wash
The component cannot be withstand washing.
■ Notice (handling)
1. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
[Component direction]
Put the
component
lateral to the
direction in
which stress
acts.
2. Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of the
board.
[Component layout close to board]
3. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
4. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
Perforation
B
Susceptibility to
stress is in the order
of : A>C>B
C
A
Slit
11
5. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. the use of
solder containing Ag should be done to prevent the
electrode erosion.
6. Do not clean or wash the component as it is not
hermetically sealed.
7. In case of covering discriminator with over coat,
conditions such as material of resin, cure temperature,
and so on should be evaluated well.
8. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of mis-correlation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
41
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
Discriminators Chip Low-profile Type CDSCA Series
4.5±0.1
CDSCA10M7 series forms a resonator on a piezo electric
ceramic sabstrate. In combination with ICs, this type
obtains stable demoduration characteristics in wide
0.2±0.2
0.4±0.05
bandwidth.
4.1max
■ Features
0.4(ref.)
0.4(ref.)
0.8±0.1
1. Compact and high reliability and recommended for
0.8
±
0.1
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demoduration characteristics can be
obtained without adjustment.
1.5
±
0.1
1.5±0.1
(in mm)
4. Stable temperature characteristics.
5. Recommended for Pb free soldering.
Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion
Part Number
IC
Detection Method
(MHz)
(kHz)
(mV)
(% )
CDSCA10M7GF107-R0
10.700 (fn)
fn±80 min.
52 min.
3.0 max. TA31272F
Quadrature
(fn) means nominal center frequency.
■ Standard Land Pattern Dimensions
3.0
1.0
2.0
1.0
(in mm)
12
42
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ Test Circuit
■ Frequency Characteristics
Vcc (5.0V)
AF OUT
1000
100
0.01µF
0.01µF
24 23 22 21 20 19 18 17 16 15 14 13
TA31272F
100
10
AF Output
1
2
3
4
5
6
7
8
9
10 11 12
Distortion
X
R
C
0.1µF
0.1µF
10
1
0.01µF
X: CDSCA10M7GF107-B0
R: 1.2 [kohm]
C: open
S.S.G.
Input signal conditions
1
0.1
Input Level
Mod. Freq.
Freq.Dev.
100dBµ
1000Hz
±40kHz
10.4 10.5 10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
12
43
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Chip Type Discriminators CDSCA Series Notice
■ Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
5 sec
260
240
Gradual
Cooling
150
60
60
Time (sec.)
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of +280±5°C for 3.0 seconds±0.5 seconds.
2. Wash
The component cannot be withstand washing.
■ Notice (Handling)
1. The component mounted on the PCB may be damaged if
[Component direction]
excess mechanical stress is applied.
Put the
component
laterally to the
direction in
which stress
acts.
2. Layout the components on the PCB to minimize the
stress imposed by the warp or flexure of the board.
3. After installing components, if solder is excessively
applied to the circuit board, mechanical stress will cause
[Component layout close to board]
destruction resistance characteristics to be lower. To
prevent this, be extremely careful in determining shape
and dimension before designing the circuit board diagram.
4. When the positioning claw or pick up nozzle are worn, the
excess load is applied to the components while
positioning or placing are performed. Careful checking
and maintenance are necessary to prevent unexpected
trouble.
Perforation
B
Susceptibility to
stress is in the order
of : A>C>B
C
A
Slit
5. When correcting component's position with a soldering
iron, the tip of the soldering iron should not directly touch
the chip component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. The use of solder containing Ag should be
considerd to prevent the electrode erosion.
6. Do not clean or wash the component as it is not
hermetically sealed.
12
7. In case of overcoating the part, coating conditions such
as material, curing temperature, and so on must be
evaluated deeply.
8. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of mis-correlation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
44
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Ceramic Filters (CERAFILr) for FM Receivers
Discriminators CDALA Series
8.0±1.0
Freq. Rank (Color Dot)
CDALA10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in wide
E
C
I
A
J
M
A
R
K
I
N
G
O
D
E
bandwidths.
0.4±0.1
0.5±0.1
0.65±0.1
5.0±0.2
■ Features
1. Compact and excellent mechanical strength.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be obtained
without adjustment.
CDALA10M7G_ Series
(in mm)
4. The MG type for wide bandwidths and the MC type for
narrow bandwidths are available.
8.0±1.0
Freq. Rank (Color Dot)
5. Stable temperature characteristics.
6. We recommend combination : ceramic discriminator
CDALA10M7 series and "CERAFIL" SFELA10M7 of the
same frequency rank.
E
C
I
A
J
M
A
R
K
I
N
G
O
D
E
0.4±0.1
0.5±0.1
0.65±0.1
5.0±0.2
CDALA10M7C_ Series
(in mm)
Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion
Part Number
IC
Detection Method
(MHz)
(kHz)
(mV)
(% )
CDALA10M7GA001-B0
CDALA10M7GA016-B0
CDALA10M7GA018-B0
CDALA10M7GA046-B0
CDALA10M7GA048-B0
CDALA10M7GA092-B0
CDALA10M7CA001-B0
CDALA10M7CA005A-B0
CDALA10M7CA040-B0
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
10.700 ±30kHz
345 min.
300 min.
300 min.
330 min.
400 min.
300 min.
242 min.
100 min.
130 min.
25 min.
within60 to 90mV
60 min.
0.6 max. CX20029
0.9 max. TA8122F
0.9 max. TA8132N
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
280 min.
1.0 max.
1.0 max.
LA1832
LA1835
700 min.
60 min.
1.0 max. TA2132P
35 min.
-
CX20091
LA7770
600 min.
6.0 max.
40 min.
0.7 max. TEA5710
■ Center Frequency Rank Code
CODE
30kHz Step
25kHz Step
13
D
B
A
C
E
Z
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A,B,C,D,E
Combination A,B,C
M
45
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
■ CDALA10M7GA001-B0
Test Circuit
Frequency Characteristics
500
100
AFC
REF
5
33
10
1µ
0.01µ
280
AF OUTPUT
32
+
–
39
AF Output
CX20029
28
9
S.S.G.
Vcc=+3.0V
10
1
Unit
R : Ω
C : F
Distortion
1
0.1
Input signal conditions
Input Level
Mod. Freq.
Freq.Dev.
110dBµ
400Hz
±22.5kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
■ CDALA10M7GA016-B0
Test Circuit
Frequency Characteristics
500
100
VCC +3V
DC Out AF Out
+
10
24 23 22 21 20 19 18 17 16 15 14 13
TA8122F (TOSHIBA)
AF Output
1
2
3
4
5
6
7
8
9 10 11 12
+
CDACV10M7GA016
10
1
Distortion
SFELA10M7DF00
IF in
Unit
R : Ω
C : F
1
0.1
Input signal conditions
Input Level
80dBµ
Mod. Freq.
Freq.Dev.
1000Hz
±22.5kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
■ CDALA10M7GA018-B0
Test Circuit
Frequency Characteristics
1F in
Vcc 3V
DC out
AF out
1000
100
2.2µ
+
SFELA10M7DF00
0.033µ
330p
AF Output
10
100
10
1
13
24 23 22 21 20 19 18 17 16 15 14 13
TA8132N (TOSHIBA)
1
2
3
4
5
6
7
8
9
10 11 12
1
22µ
Distortion
+
Unit
R : Ω
C : F
0.022µ
Vcc 3V
0.1
Input signal conditions
Input Level 80 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±22.5 kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0
Frequency ( MHz )
Continued on the following page.
46
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ CDALA10M7GA046-B0
Test Circuit
Frequency Characteristics
AF OUT
100
10
1
1000
100
10
CSBLA456KE2ZF15 0.01µ
1200p
AF Output
5.6k
0.047µ
0.01µ
1µ
+
22µ
+
AFC
+
+
1µ
3.3µ
24 23 22 21 20 19 18 17 16 15 14 13
6.8k
LA1832 (SANYO)
1
2
3
4
5
6
7
8
9
10 11 12
300
75
Distortion
270
3k
2.2µ
0.047µ
CDALA10M7GA046
IF-IN
1µ
+
10µ
0.047µ
+
100µ
Unit
R : Ω
C : F
REG
Vcc (5V)
0.1
1
Input signal conditions
Input Level 112 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±75 kHz
10.4
10.5
10.6
10.7
10.9
11.0
10.8
Frequency ( MHz )
■ CDALA10M7GA048-B0
Test Circuit
Frequency Characteristics
Vt
500
100
CSBLA456KE2ZF15
1500p
33n
L. P. F.
L. P. F.
33n
3.3µ
+
AFC
47n
AF Output
Rch
Lch
10µ
10µ
+
5k
10
15k
1µ
24
+
+
30
1
29
2
28
3
27
4
26
25
23
22
21
20
19
18
17
14
16
15
LA1835 (SANYO)
5
6
7
8
9
10
11
12
13
300
75
+
0.047µ
0.047µ
1µ
10µ
3k
1k 1k
IF-IN
10
1
20k
0.47µ
+
+ +
10µ
Distortion
Unit
R : Ω
C : F
CDALA10M7GA048
VCC(7V)
47n
10µ
REG.
1
0.1
Input signal conditions
Input Level
Mod. Freq.
Freq.Dev.
112dBµ
1000Hz
±75kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
■ CDALA10M7GA092-B0
Test Circuit
Frequency Characteristics
DC OUT
2.2µ
500
100
AF OUT
+
CDALA10M7GZ092-B0
Vcc(3.0V)
+
10
13
AF Output
16
15
14
13
12
11
10
9
TA2132P(TOSHIBA)
10
1
Distortion
1
2
3
4
5
6
7
8
+
Unit
R : Ω
C : F
0.1
1
IF-IN
Input signal conditions
Input Level
Mod.Freq.
Freq.Dev.
80dBµ
1000Hz
±22.5kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
Continued on the following page.
47
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Continued from the preceding page.
■ CDALA10M7CA001-B0
Test Circuit
Frequency Characteristics
VCC 5V
AF Output
AFC
1000
100
10
100
10
1
IF in
0.01µ
+
+
+
+
+
AF Output
28 27 26 25 24 23 22 21 20 19 18 17 16 15
CX20090 (SONY)
1
2
3
4
5
6
7
8
9
10 11 12 13 14
+
Unit
R : Ω
C : F
Distortion
Ref.
0.1
1
Input signal conditions
Input Level 110 dBµ
Mod. Freq. 400 Hz
Freq. Dev. ±22.5 kHz
10.4
10.5
10.6
10.7
10.8
10.9
11.0
Frequency ( MHz )
■ CDALA10M7CA005A-B0
Test Circuit
Frequency Characteristics
5000
500
DC Bias
+5.2V
DC Bias
+5V
AF Output
10k
10k
Demod.OUT
2k
100
10
1
1000
220p
DATA OUT
20
1
19
18
17
16
15
14
13
12
9
11
IC : LA7770 (SANYO)
Distortion
2
3
4
5
6
7
8
10
5p
50
100
Vcc=12V
+
-
IF IN
Unit
R : Ω
C : F
10
Input signal conditions
Input Level 100 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±75 kHz
10.6
10.7
10.8
Frequency ( MHz )
■ CDALA10M7CA040-B0
Test Circuit
Frequency Characteristics
VCC (3V)
1000
100
+
AF-OUT
0.01µ 1µ
0.01µ
10µ
100µ
100µ
+
+
+
DC-OUT
100
10
1
10
24 23 22 21 20 19 18 17 16 15 14 13
13
AF Output
TEA5710 (PHILIPS)
1
2
3
4
5
6
7
8
9
10 11 12
Distortion
0.01µ
0.22µ
1
280
0.22µ
50
Unit
R : Ω
C : F
S.S.G.
0.1
Input signal conditions
Input Level 100 dBµ
Mod. Freq. 1000 Hz
Freq. Dev. ±22.5 kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0
Frequency ( MHz )
48
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Lead Type Discriminators Notice
■ Notice (Soldering and Mounting)
The component cannot be withstand washing.
■ Notice (Handling)
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
will be applied.
chlorine content, in flow soldering.
6. In case of covering discriminator with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated well.
7. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of mis-correlation if there is any deviation,
especially stray capacitance, from the test
circuit in the specification.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
13
49
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Packaging
■ Minimum Quantity
Part Number
Taping ø180mm
2,000
Ammo Pack
Bulk
SFECV
SFECS
2,000
SFELA
1,500
1,500
1,000
1,500
500
500
500
500
500
SFELB
SFVLA
SFKLA
SFTLA
CDACV / CDSCA
CDALA
2,000
1,500
500
■ Chip Type CERAFILr
■ Small Chip Type CERAFILr
SFECV Series
SFECS Series
40T0.15
W0.1
Y0.0
10 pitch accumulated
2.0T0.05
4.0T0.1
φ1.5
4.0T0.1
φ1.55T0.05 2.0T0.05
Chip Filter
3.0T0.1
Peeling strength
0.1~0.7N
3.35T0.1
Chip Filter
4.0T0.1
4.0T0.1
Peeling strengh (0.1Y0.7N)
Cover Tape
3˚max.
3.45
3 max.
10˚ max.
Cover film
10 max.
User direction of feed
Part number marked side is always facing upside.
The feeding holes side of cavity tape is always input terminal.
· Part Number marked side is always facing upside.
User Direction of Feed
· The feeding holes side of cavity tape is always input terminal.
(in mm)
■ Chip Type Discriminator
■ Chip Type Low-Profile Type Discriminator
CDACV Series
CDSCA Series
4.0±0.1
+0.1
Ø1.5 -0
W0.1
Y0.0
2.0T0.05
4.0T0.1
φ1.5
2.0±0.05
+0.1
Ø1.5 -0
3.0T0.1
4.0±0.1
4.0T0.1
2.2±0.1
Peeling strengh (0.1Y0.7N)
Cover Tape
The cover film peel
strength force 0.1~0.7N
3˚max.
Cover Film
10˚
10 max.
Part number marked side is always facing upside.
User Direction of Feed
Part Number marked side is always facing upside
Direction of Feed
(in mm)
Continued on the following page.
13
50
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Packaging
Continued from the preceding page.
■ Lead Type CERAFILr SF_LA Series
∆h ∆h
P2
P
∆S1
F1 F1
D0
P1
F
t
P0
Item
Code
L1
Dimensions
3.0 min.
2.0 max.
12.7
Tolerance
Remarks
Lead Length under the Hold Down Tape
Length of Cat off
L2
To distinguish the direction
Pitch of Components
P
±0.5
±0.2
±0.5
±0.5
Pitch of Sprocket Hole (1)
Length from Hole Center to Lead
P0
P1
P2
F
12.7
3.85
Length from Hole Center to Component Center
Pitch of the Terminal (1)
6.35
+0.5
5.0
–0.2
Pitch of the Terminal (2)
F1
2.5
±0.2
±1.0
±1.0
±0.5
Slant to the Forward or Backward
Slant to the Left or Right
∆h
∆S1
W
0
0
Width of Carrier Tape
18.0
Width of Hold Down Tape
W0
W1
W2
6.0 min.
9.0
Must not protrude to the carrier tape
Position of Sprocket Hole
±0.5
+0.5
–0
Gap of Hold Down Tape and Carrier Tape
0
Distance Between the Center of Sprocket
Hole and Lead Stpper
H0
18.0
±0.5
Diameter of Sprocket Hole
Total Tape Thickness
D0
t
ø4.0
0.6
±0.2
±0.2
±1.5
Pitch of Sprocket Hole (2)
P020
254.0
The pitch of 20 sprocket holes
(in mm)
Continued on the following page.
13
51
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Packaging
Continued from the preceding page.
■ Lead Type Discriminator CDALA Series
∆h ∆h
P2
P
∆S1
D0
P1
F
t
P0
Item
Code
L1
Dimensions
3.0 min.
12.7
Tolerance
———
±0.5
Remarks
Lead length under the hole down tape
Pitch of component
P
Pitch of sprocket hole (1)
Length from hole center to lead
P0
P1
P2
12.7
±0.2
3.85
±0.5
Length from hole center to component center
6.35
±0.5
+0.5
-0.2
Lead spacing
F
5.0
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
∆h
∆S1
W
0
0
±1.0
±1.0
±0.5
———
±0.5
18.0
6.0 min.
9.0
Width of hold down tape
Position of sprocket hole
W0
W1
Gap of hold down tape and
Carrier tape
+0.5
-0.0
W2
H0
0
Hold down tape doesn't exceed the carrier tape
Distance between the center of
sprocket hole and lead stopper
18.0
±0.5
Diameter of sprocket hole
Total tape thickness
D0
t
ø4.0
0.6
±0.2
±0.2
±1.5
Pitch of sprocket hole (2)
Po20
254.0
The pitch of 20 sprocket holes
(in mm)
13
52
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Test Circuit of Ceramic Discriminator
Part Number
IC Manufacturer
IC
Part Number
IC Manufacturer
IC
CDALA10M7GA001
CDALA10M7GA002
CDALA10M7GA004
CDALA10M7GA005
CDALA10M7GA006
CDALA10M7GA007
CDALA10M7GA008
CDALA10M7GA009
CDALA10M7GA011
CDALA10M7GA012
CDALA10M7GA013
CDALA10M7GA014A
CDALA10M7GA015
CDALA10M7GA016
CDALA10M7GA017
CDALA10M7GA018
CDALA10M7GA019
CDALA10M7GA020
CDALA10M7GF021A
CDALA10M7GA022
CDALA10M7GA023
CDALA10M7GF024
CDALA10M7GA025
CDALA10M7GA026
CDALA10M7GA027
CDALA10M7GA027N
CDALA10M7GA028
CDALA10M7GA029
CDALA10M7GA030
CDALA10M7GA031
CDALA10M7GA032
CDALA10M7GA033
CDALA10M7GA034V
CDALA10M7GA035
CDALA10M7GA036
CDALA10M7GA037
CDALA10M7GA038
CDALA10M7GA039
CDALA10M7GA040
CDALA10M7GA041
CDALA10M7GA042
CDALA10M7GA043
CDALA10M7GA044
CDALA10M7GA045
CDALA10M7GA046
CDALA10M7GA047
CDALA10M7GA048
CDALA10M7GA049
CDALA10M7GA050
CDALA10M7GA051
CDALA10M7GA052
CDALA10M7GA053
CDALA10M7GA054
CDALA10M7GA055
CDALA10M7GA056
CDALA10M7GA057
CDALA10M7GA058
CDALA10M7GA059
CDALA10M7GA060
CDALA10M7GA061
Sony
Sony
CDALA10M7GF062
CDALA10M7GA063
CDALA10M7GA064
CDALA10M7GA065
CDALA10M7GA066
CDALA10M7GA067
CDALA10M7GA068
CDALA10M7GA069
CDALA10M7GA070
CDALA10M7GA071
CDALA10M7GF072
CDALA10M7GA073
CDALA10M7GA075
CDALA10M7GA076
CDALA10M7GA077
CDALA10M7GA078
CDALA10M7GA079
CDALA10M7GA080
CDALA10M7GA080A
CDALA10M7GA081
CDALA10M7GA082
CDALA10M7GA083
CDALA10M7GA084
CDALA10M7GA085
CDALA10M7GA086
CDALA10M7GA087
CDALA10M7GA088
CDALA10M7GA089
CDALA10M7GA090
CDALA10M7GA091
CDALA10M7GA092
CDALA10M7GA092D
CDALA10M7GA093
CDALA10M7GA094
CDALA10M7GA095
CDALA10M7GA096
CDALA10M7GA097
CDALA10M7GA098
CDALA10M7GA100
CDALA10M7GA100A
CDALA10M7GA101
CDALA10M7GA102
CDALA10M7GA103
CDALA10M7GA104
CDALA10M7GA105A
CDALA10M7GA106
CDALA10M7GF107
CDALA10M7GF108A
CDALA10M7GF109
CDALA10M7GA110
Toko
Samsung
Samsung
Samsung
Rohm
CX20029
CX20076
BA4234L
BA4230AF
TA7640AP
LA1260
TK14581
KA2292
Rohm
KA2295
Rohm
KA2298
Toshiba
Sanyo
BA4110
Rohm
BA4240L
CXA1991N
CXA1538M/N/S
LA1150
Toshiba
Toshiba
Panasonic
Sony
TA7303P
TA7130P
AN7004
Sony
Sony
Sanyo
CXA1030P
AN7007SU
AN7006S
LA1816
Toshiba
Toshiba
Motorola
Sony
TA7765
Panasonic
Panasonic
Sanyo
TA31161
MC13158
CXA1611
CXA3067M
TA2111
Toshiba
Philips
TA8122AN/F
TEA5591
TA8132AN/AF
BA1440
Sony
Toshiba
Sony
Toshiba
Rohm
CX1691M
LA1838/M
TA2104AFN
TA2104F
U4313B
Sanyo
Philips
NE604
Toshiba
Toshiba
Telefunken
Toshiba
Sanyo
Philips
TBA229-2
LA1810
Sanyo
Sanyo
LA7770
TA2099N
LA1827
Philips
TDA2557
U829B
Telefunken
Sanyo
Rohm
BH4126FV
SA639
LA1805
Philips
Sony
CXA1238
CXA1238N
U2501B
Sanyo
LA1833
Sony
Motorola
Toshiba
Samsung
Samsung
Samsung
Toshiba
Toshiba
Sony
MC3363
Telefunken
Philips
TA8721ASN
KA22425
KA22901
KA2297
TBA120U
TEA5592
TA2003
Philips
Toshiba
Sony
CXA1343M
TA2007N
U4490B
TA2132
Toshiba
Telefunken
Philips
TA2132BP
CXA1111
LA1822
TEA5594
TA2029
Sanyo
Toshiba
Sanyo
Temic
U2765B
LA1830
Philips
SA636DK
AN6138SH
CAA3220TS
TA2149N
TA2149AN
LA1823
Siemens
Toshiba
Philips
TDA6160X
TA8186
Matsushita
Philips
TEA5710
BA4220
Toshiba
Toshiba
Sanyo
Rohm
Philips
SA605
Sanyo
LA1831
Toshiba
Samsung
Rfmd
TA2142FN
KB22902
RF2925
Siemens
Toshiba
Sanyo
TDA6160-2X
TA2008A/AN
LA1832/M
SA626
Philips
TEA5757HL
MB15G611
TA31272FN
LA1225M
TK14588
DS9RF21
Philips
Fujitsu
Sanyo
LA1835/M
MC13156
TA2022
Toshiba
Sanyo
13
Motorola
Toshiba
Siemens
Motorola
Panasonic
Sony
Toko
TDA1576T
MC13173
AN7232
Dspg
Part Number
CDALA10M7CA001
CDALA10M7CA002
CDALA10M7CA004A
CDALA10M7CA005A
CDALA10M7CA006
CDALA10M7CA009
CDALA10M7CA040
IC Manufacturer
Sony
IC
CXA1376AM
TEA5712T
µPC1391M
TA2057
CX20091
TA7687P/F
MC3356P
LA7770
Philips
Toshiba
Motorola
Sanyo
NEC
Toshiba
Toshiba
Samsung
Rohm
TA2046
Philips
TEA5591
TA7640AP
TEA5710
KA2244
Toshiba
Philips
BA1448
Philips
TEA5762/5757
53
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Example of Appllied Circuit
■ LA1140(Automotive Radio)
L1 2.2µH
AGC
R7 200
C7
0.047
C3
0.047
VR1
150k
C8
0.047
L2
Vref.
SFELA10M7HAA0-B0
R14
R4
R6
330
SFELA10M7HAA0-B0
C.F.
R13
12k
16
12
9
11
15
13
10k
AFC
R1
100
1
7
8
C1
0.022
+
C9 0.047
C10 4.7µ
R8
330
0.047
C6
FRONT
END
LA1140
2
3
(SANYO)
R2
R3
C.F.
+
C2
0.022
C4
C5
1.8k 1.8k
C11
33p
R2
1k
C14
0.047
4
5
6
14
10
22k
R10
0.047 x 2
R9
220k
+
2.2µ
R2
47k
C13
33p
C15
■ CXA1019M(Radio)
FM PF
FM OSC
FM CERAFIL®
CERAMIC DISCRIMINATOR
(SFELA10M7FA00-B0) (CDALA10M7CA001-B0)
W
FM/AM
BAND SELECT
R
W
IF
OUT
FM IF
IN
25
26
Vcc
13
8
7
6
14 17
2
19
FM DISCRI
METER
REG
OUT
FM
FM IF
AMP
8
FM
TUNING
METER
RIPPLE
FILTER
FRONT
END
REGULATOR
12
13
10
W
BPF
DETECTOR
28
1
AM ANT
CXA1019M(SONY)
VOL
AM
FRONT
END
AM IF
AF
PRE
AMP
AMP
/
POWER
27
SP
W
DETECTOR
AM IF
IN
20 16
AF IN
11
5
18
22
23
21
4
24
3
DEP
OUT
W
AM OSC
W
W
W
AM CERAFIL®
(SFULA455KU2B-B0)
VOL
No adjustment is needed the FM detection stage due to use the ceramic discriminator.
Continued on the following page.
13
54
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Example of Appllied Circuit
Continued from the preceding page.
■ TA8122F(Radio)
IS2236
0.022µF
100k
CSBLA456KE2ZF16-B0
FM
ST
L3
L1
L2
T1
W
4.7µ
10µF
W
L
MO
AM
W
15p
FM
OSC
W
W
FM
PF
R
AM
OSC
DEF
OUT
MPX
IN
OUT Vcc1
LPF1 LPF2
VCO
OUT
L
OUT
R
AM
PF IN
4.7µ
24
23
22
21
20
19
AF
18
17
16
15
14
ST
13
PRE
Phase
COM
Phase
COM
FM
AM
TA8122F(TOSHIBA)
VCO
Freq
DECODER
OSC OSC
AM
MIX
AM/FM
MONO SW
AM
RF
FM
DET
HYX
SW
Divider
AM
MIX
AM
AGC
AM
IF
L
FM
DET
TUN
LED
ST
LED
FM
RF
FM
IF
DET
1
RF IN
2
3
4
5
6
7
8
9
10
TUN
LED
11
12
FM
FM
MIX
AM
MIX
AM
AGC
AM
IF IN
FM
IF IN
GND1
Vcc2
ST
LED
GND2
QUAD
W
BPF
0.033µ
T2
Vcc
(3V)
10µH
W
SFULA455KU2B-B0 SFELA10M7FA00-B0
CDALA
10M7GA16-B0
Detection and MPX stage adjustment ceramic discriminator and ceramic resonator (CERALOCK®)
13
55
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Note:
1. Export Control
For customers outside Japan
<
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require
especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one
of our products for other applications than specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Power plant equipment
t Medical equipment
y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment
i Disaster prevention / crime prevention equipment
o Data-processing equipment
! Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of May 2001. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product
specification or to transact the approval sheet for product specification, before your ordering.
5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us.
http://www.murata.co.jp/products/
He a d O ffice
In te rn a tio n a l Divisio n
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp
相关型号：
©2020 ICPDF网 联系我们和版权申明