首页 |元器件品牌

SFPKA455KG1A-R1 [MURATA]

Ceramic Discriminators for Communications Equipment; 陶瓷鉴通讯设备
SFPKA455KG1A-R1
型号： SFPKA455KG1A-R1
厂家： muRata    muRata
描述：

Ceramic Discriminators for Communications Equipment
陶瓷鉴通讯设备

陶瓷滤波器 过滤器
文件： 总78页 (文件大小：1389K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr)/  
Ceramic Discriminators  
for Communications  
Equipment  
Cat.No.P05E-16  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
EU RoHS Compliant  
s
All the products in this catalog comply with EU RoHS.  
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use  
of Certain Hazardous Substances in Electrical and Electronic Equipment."  
For more details, please refer to our website 'Murata's Approach for EU RoHS'  
s
(http://www.murata.com/info/rohs.html).  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
CERAFILr and "CERAFIL" in this catalog are  
1
CONTENTS  
the trademarks of Murata Manufacturing Co., Ltd.  
2
3
Part Numbering  
Products Guide  
2
4
1
2
3
4
5
6
CERAFILr kHz SMD Type SFPKA Series  
5
4
CERAFILr kHz SMD Type CFUKG Series  
CERAFILr kHz SMD Type CFUKG_X Series  
CERAFILr kHz SMD Type CFUKF Series  
CERAFILr kHz SMD Type CFWKA Series  
CERAFILr kHz SMD Type CFWKA_Y Series  
7
9
5
11  
13  
15  
17  
21  
23  
25  
31  
32  
34  
35  
37  
39  
41  
43  
45  
47  
49  
51  
52  
65  
70  
74  
6
7
kHz SMD Type CERAFILr Notice  
7
8
CERAFILr MHz SMD Type SFECF10M7 Series  
CERAFILr MHz SMD Type SFSCE10M7 Series  
8
MHz SMD Type CERAFILr Notice  
9
SMD Type CERAFILr Standard Land Pattern Dimensions  
kHz SMD Type CERAFILr Packaging  
10  
11  
12  
13  
14  
15  
16  
17  
18  
MHz SMD Type CERAFILr Packaging  
9
CERAFILr Plastic Case General Use CFULA Series  
10  
11  
12  
13  
14  
15  
16  
CERAFILr Plastic Case General Use CFWLA Series  
CERAFILr Plastic Case Miniaturized Type CFULB Series  
CERAFILr Plastic Case Miniaturized Type CFWLB Series  
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series  
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series  
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series  
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series  
Plastic Case Type CERAFILr Minimum Quantity/Notice  
17  
18  
kHz Type Ceramic Discriminators  
MHz Type Ceramic Discriminators  
Ceramic Discriminators Notice  
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
o Part Numbering  
Ceramic Filters (CERAFILr) for IF  
(Part Number)  
-R0  
SF  
P
KA 455K D4A  
SF  
E
CF 10M7 DF00 S0 -R0  
q
w
e
r
t
y
u
qProduct ID  
wOscillating/Element  
tProduct Specification  
Product ID  
Oscillating/Element  
Product Specification  
Code  
U
W
P
4 Elements Area Expansion mode  
6 Elements Area Expansion mode  
4 Elements Area Expansion mode  
2 Elements Thickness Expansion mode  
2 Elements Thickness Shear mode  
Three-digit alphanumerics express pass bandwidth,  
center frequency tolerance and design type.  
CF  
D4A  
SFE/S/J series are expressed by four-digit alphanumerics.  
Ceramic Filters  
SF  
E
yIndividual Specification  
S
Individual Specification Code  
Code  
eStructure/Size  
Expressed by three-digit alphanumerics.  
001  
SFE/S/J series are expressed by two-digit alphanumerics.  
Structure/Size  
Chip Type  
Code  
Cp/Kp  
Lp  
With standard type,  
is omitted.  
y
Lead Type  
uPackaging  
p is "A" or subsequent code, which indicates the size. It varies  
depending on vibration mode and number of elements.  
Chip type is only applied for SF series.  
Packaging  
Code  
-B0  
Bulk  
Embossed Taping ø=180mm  
Embossed Taping ø=330mm  
-R0  
rNominal Center Frequency  
-R1  
Expressed by four-digit alphanumerics. The unit is hertz (Hz). If  
the unit is "kHz", it is expressed by three figures plus "K." If the  
unit is "MHz", a decimal point is expressed by the capital letter  
"M."  
Embossed taping is applied to chip type.  
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators for IF (kHz)  
(Part Number)  
X
16 -B0  
CD  
B
LB 450K  
C
A
q
w
e
r
t
y
u
i
o
qProduct ID  
yApplication  
Product ID  
Application  
Standard  
Code  
CD  
Ceramic Discriminators  
A
L
Application with coil  
wOscillating  
uElement Type  
Oscillating  
Code  
Area Expansion mode  
Element Type  
Low-capacitance  
High-capacitance  
B
Code  
X
Y
eStructure/Size  
Structure/Size  
Chip Type  
Code  
Cp/Kp  
Lp  
iIC  
Lead Type  
IC  
Code  
is "A" or subsequent code, which indicates the size. It varies  
depending on vibration mode and number of elements.  
p
Applicable IC Control code  
16  
oPackaging  
rNominal Center Frequency  
Packaging  
Bulk  
Code  
-B0  
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).  
Capital letter "K" following three figures expresses the unit of  
"kHz."  
Embossed Taping ø=180mm  
Embossed Taping ø=330mm  
-R0  
-R1  
tDetection  
Embossed taping is applied to chip type. With non-standard products,  
one letter indicating "Individual Specification" is added between  
Detection  
Code  
"
Applicable IC" and " Package Specification code."  
o
i
Quadrature Detection  
C
Ceramic Discriminators for IF (MHz)  
(Part Number)  
CD  
S
CB 10M7 GF 001 -R0  
q
w
e
r
t
y
u
qProduct ID  
tProduct Specification  
Product ID  
Product Specification  
Code  
CD  
Discriminators  
Two-digit alphanumerics express  
type, center frequency, rank, others  
GF  
wOscillation  
yIC  
Oscillation  
Code  
Thickness Shear mode  
IC  
S
Code  
Applicable IC Control Code  
001  
eStructure/Size  
uPackaging  
Structure/Size  
Code  
Chip Type  
Packaging  
Cp  
Code  
is expressed "A" or subsequent code, which indicates the size.  
p
Embossed Taping ø=180mm  
-R0  
With non-standard products, an alphanumerics indicating "Individual  
Specification" is added between " IC" and " Packaging."  
y
u
rNominal Center Frequency  
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).  
Decimal point is expressed by capital letter "M."  
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Products Guide  
oSMD Type (kHz)  
Applications  
Series  
General Use  
Attenuation  
(dB) min.  
Type  
6dB Bandwidth (kHz) min.  
A
B
C
D
E
F
G
H
J
K
L
Within 455 80 or 100kHz  
17.5 15 12.5 10  
7.5  
6
4.5  
3
2
1.5  
1
SFPKA455KM  
(4 Elements)  
–
–
–
–
–
–
o
o
o
o
o
o
o
o
o
–
–
–
–
–
–
27 (G to H; 25)  
High Selectivity  
Series  
(Plastic Case Type)  
CFUKG455KM  
(4 Elements)  
–
27 (G; 25)  
Narrow Bandwidth  
GDT Flat Type  
Miniature Series  
(Plastic Case Type)  
CFUKG455KMX  
(4 Elements)  
–
o
–
–
o
o
–
–
o
–
–
o
–
o
o
–
o
–
o
–
o
–
–
–
–
–
–
–
–
–
–
–
–
–
27 (G to H; 25)  
GDT Flat Type  
Miniature Series  
(Plastic Case Type)  
CFUKF455KM  
(4 Elements)  
25 (D to E; 23)  
GDT Flat Type  
High Selectivity  
SMD Series  
CFWKA450KBFY  
(6 Elements)  
–
–
–
45  
50  
(Plastic Case Type)  
High Selectivity  
SMD Series  
(Plastic Case Type)  
CFWKA450KM  
(6 Elements)  
–
–
o
o
o
o
–
oLead Type (kHz)  
Applications  
Series  
General Use  
6dB Bandwidth (kHz) min.  
Attenuation  
Type  
(dB) min.  
A
B
C
D
E
F
G
H
J
2
K
1.5  
–
L
Within 455 80 or 100kHz  
1
(G; 25)  
17.5 15 12.5 10  
7.5  
o
o
o
o
o
o
o
o
6
4.5  
o
o
o
o
o
o
o
o
3
CFULA455KM (4 Elements)  
CFWLA455KM (6 Elements)  
CFULB455KM (4 Elements)  
CFWLB455KM (6 Elements)  
CFULA455KMY (4 Elements)  
CFWLA455KMY (6 Elements)  
CFULB455KMY (4 Elements)  
CFWLB455KMY (6 Elements)  
27  
–
–
–
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
–
–
High Selectivity  
Low Profile Series  
(H; 35)  
35 (H, J; 60)  
–
(G; 25)  
o
o
o
–
–
27  
–
–
–
High Selectivity  
Miniature Series  
(H, J; 35)  
35 (H, J; 55)  
–
–
–
25 (D to G; 23)  
–
–
–
GDT Flat Type  
Series  
40  
–
o
–
–
–
–
25 (D to G; 23)  
–
–
–
–
GDT Flat Type  
Miniature Series  
40 (F; 35)  
–
o
–
–
–
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
1
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL kHz SMD Type SFPKA Series  
r
7.±±±.ꢀ  
ꢀ.±±±.ꢀ  
The SFPKA series is comprised of small, high-performance,  
economical, thin (5.0mm) filters consisting of 4 ceramic  
elements. Their innovative construction is perfect for  
shrinking mobile communication products such as cordless  
phones, pagers and transceivers.  
MARKING  
EIAJ  
CODE  
±.9±±.1  
Features  
c
1.5±±.ꢀ  
2.±±±.ꢀ  
1.5±±.ꢀ  
1. The filters are mountable by automatic placers.  
2. The filters can be reflow soldered and withstand  
washing.  
1.6±±.ꢀ  
2.±±±.ꢀ  
Connection  
(1): Input  
(2): Ground  
(ꢀ): Output  
(1) (2) (ꢀ)  
3. They are slim, at only 5.0mm maximum thickness.  
4. The bandwidth ranges from D to H.  
(in mm)  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Ripple  
(dB)  
Part Number  
Frequency (fo) Bandwidth  
(kHz)  
(kHz)  
455  
±1.5kHꢀ  
fn±10.0  
min.  
fn±20.0 max.  
27 min.  
4.0 max.  
2.0 max.  
SFPKA455KD4A-R1  
SFPKA455KE4A-R1  
SFPKA455KF4A-R1  
SFPKA455KG1A-R1  
SFPKA455KH1A-R1  
1500  
1500  
1500  
1500  
2000  
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±7kHꢀ]  
455  
±1.5kHꢀ  
fn±7.5  
min.  
fn±15.0 max. 27 min. 6.0 max. 1.5 max.  
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±5kHꢀ]  
fn±12.5 max. 27 min. 6.0 max. 1.5 max.  
455  
±1.5kHꢀ  
fn±6.0  
min.  
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±4kHꢀ]  
455  
±1.0kHꢀ  
fn±4.5  
min.  
fn±10.0 max. 25 min. 6.0 max. 1.5 max.  
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±3kHꢀ]  
fn±±.0 max. 35 min. 6.0 max. 1.5 max.  
455  
±1.0kHꢀ  
fn±3.0  
min.  
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±2kHꢀ]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kHꢀ.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(ꢀ)  
(1)  
(2)  
RF Voltmeter  
Rg  
E1  
R2  
E2  
S.S.G.  
±dBm  
(1): Input  
(2): Ground  
(ꢀ): Output  
Rg+R1=R2=Input/Output Impedance  
E1: S.S.G. Output Voltage  
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
1
SFPKA455KE4A-R1  
SFPKA455KE4A-R1  
0
0
400  
10  
20  
30  
40  
10  
20  
30  
40  
360  
320  
280  
240  
50  
60  
50  
60  
200  
160  
70  
70  
120  
80  
90  
80  
90  
80  
40  
100  
200  
100  
0
430  
455  
480  
300  
400  
500  
600  
700  
800  
900  
1000  
Frequency (kHz)  
Frequency (kHz)  
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL kHz SMD Type CFUKG Series  
r
2
The CFUKG series is comprised of small, high-performance,  
thin (4.0mm) filters consisting of 4 ceramic elements.  
Their innovative construction is perfect for shrinking  
mobile communication products such as pocket pagers  
and cellular phones.  
MARKING  
EIAJ  
CODE  
1.2±±.1  
C±.5  
1.±±±.1  
1.±±±.ꢀ  
1.±±±.1  
1.±±±.ꢀ  
4.±±±.ꢀ  
6.±±±.ꢀ  
Features  
c
1.5±±.ꢀ  
ꢀ.±±±.ꢀ  
1.5±±.ꢀ  
1. The filters are mountable by automatic placers.  
2. The filters can be reflow soldered and withstand  
washing.  
Connection  
(1): Input  
(2): Output  
(ꢀ): Ground  
(1)  
(2)  
(ꢀ)  
3. They are slim, at only 4.0mm maximum thickness,  
and have a small mounting area (7.5x6.0mm)  
enabling flexible PCB design.  
(in mm)  
4. The bandwidth ranges from D to G.  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Ripple  
(dB)  
Part Number  
Frequency (fo) Bandwidth  
(kHz)  
(kHz)  
455  
1.5kꢀH  
fn 10.0  
min.  
fn 20.0 max.  
27 min.  
4.0 max.  
2.0 max.  
CFUKG455KD4A-R0  
CFUKG455KE4A-R0  
CFUKG455KF4A-R0  
CFUKG455KG1A-R0  
1500  
1500  
1500  
1500  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 7kꢀH]  
455  
1.5kꢀH  
fn 7.5  
min.  
fn 15.0 max. 27 min. 6.0 max. 1.5 max.  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 5kꢀH]  
fn 12.5 max. 27 min. 6.0 max. 1.5 max.  
455  
1.5kꢀH  
fn 6.0  
min.  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 4kꢀH]  
455  
1.0kꢀH  
fn 4.5  
min.  
fn 10.0 max. 25 min. 6.0 max. 1.5 max.  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 3kꢀH]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kꢀH.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(2)  
Rg  
RF Voltmeter  
Connection  
E1  
R2  
E2  
(ꢀ)  
S.S.G.  
±dBm  
(1): Input  
(2): Output  
(ꢀ): Ground  
Rg+R1=R2=Input/Output Impedance  
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFUKG455KE4A-R0  
CFUKG455KE4A-R0  
±
4±±  
ꢀ±±  
2±±  
1±±  
±
±
1±  
2±  
ꢀ±  
4±  
1±  
2±  
ꢀ±  
4±  
2
5±  
6±  
5±  
6±  
7±  
7±  
8±  
9±  
8±  
9±  
1±±  
2±±  
1±±  
4ꢀ±  
455  
48±  
ꢀ±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
Frequency (kHz)  
Frequency (kHz)  
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL kHz SMD Type CFUKG_X Series  
r
The CFUKG_X series is comprised of small, high-  
performance, thin (4.0mm) filters consisting of 4  
ceramic elements.  
3
MARKING  
EIAJ  
CODE  
The filters exhibit an extremely flat GDT  
characteristic combined with a narrow bandwidth.  
The filters are recommended for narrow band digital  
communication applications.  
1.2±±.1  
C±.5  
1.±±±.1  
1.±±±.ꢀ  
1.±±±.1  
1.±±±.ꢀ  
4.±±±.ꢀ  
6.±±±.ꢀ  
1.5±±.ꢀ  
ꢀ.±±±.ꢀ  
1.5±±.ꢀ  
Connection  
(1): Input  
(2): Output  
(ꢀ): Ground  
Features  
c
(1)  
(2)  
1. The filters are mountable by automatic placers.  
2. The filters can be reflow soldered and withstand  
washing.  
(ꢀ)  
(in mm)  
3. They are slim, at only 4.0mm maximum thickness,  
and have a small mounting area (7.5x6.0mm)  
enabling flexible PCB design.  
4. The bandwidth ranges from E to H.  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
6dB  
Stop  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Ripple  
(dB)  
GDT Deviation  
(µs)  
Part Number  
Frequency (fo) Bandwidth Bandwidth  
(kHz)  
(kHz)  
(kHz)  
455  
1.5kHꢀ  
fn 7.5  
min.  
fn 17.5 max.  
27 min.  
6.0 max.  
1.0 max.  
25.0 max.  
CFUKG455KE4X-R0  
CFUKG455KF4X-R0  
CFUKG455KG1X-R0  
CFUKG455KH1X-R0  
1500  
1500  
1500  
1500  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 5kHꢀ] [within fn 5kHꢀ]  
455  
1.5kHꢀ  
fn 6.0  
min.  
fn 15.0 max.  
27 min.  
6.0 max.  
1.0 max.  
25.0 max.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 4kHꢀ] [within fn 4kHꢀ]  
455  
1.0kHꢀ  
fn 4.5  
min.  
fn 12.5 max.  
25 min.  
6.0 max.  
1.0 max.  
25.0 max.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 3kHꢀ] [within fn 3kHꢀ]  
455  
1.0kHꢀ  
fn 3.0  
min.  
fn 10.0 max.  
25 min.  
7.0 max.  
1.0 max.  
25.0 max.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 2kHꢀ] [within fn 2kHꢀ]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kHꢀ.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(2)  
Rg  
RF Voltmeter  
Connection  
E1  
R2  
E2  
(ꢀ)  
S.S.G.  
±dBm  
(1): Input  
(2): Output  
(ꢀ): Ground  
Rg+R1=R2=Input/Output Impedance  
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFUKG455KE4X-R0  
CFUKG455KE4X-R0  
±
±
2±±  
1±  
2±  
ꢀ±  
4±  
1±  
2±  
ꢀ±  
4±  
15±  
1±±  
3
5±  
6±  
5±  
6±  
7±  
7±  
5±  
8±  
9±  
8±  
9±  
1±±  
2±±  
1±±  
±
4ꢀ±  
455  
48±  
ꢀ±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
Frequency (kHz)  
Frequency (kHz)  
10  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL kHz SMD Type CFUKF Series  
r
The CFUKF series is comprised of small, high-performance,  
thin (4.0mm) filters consisting of 4 ceramic elements.  
The filters exhibit an extremely flat GDT  
characteristic.  
MARKING  
EIAJ  
CODE  
1.2±±.1  
C±.5  
4
1.±±±.1  
1.±±±.ꢀ  
1.±±±.1  
1.±±±.ꢀ  
The filters are recommended for digital  
communication applications and are perfect in hand-held  
cellular phones, etc.  
4.±±±.ꢀ  
6.±±±.ꢀ  
1.5±±.ꢀ  
ꢀ.±±±.ꢀ  
1.5±±.ꢀ  
Connection  
(1): Input  
(2): Output  
(ꢀ): Ground  
Features  
c
(1)  
(2)  
1. The filters are mountable by automatic placers.  
2. The filters can be reflow soldered and withstand  
washing.  
(ꢀ)  
(in mm)  
3. They are slim, at only 4.0mm maximum thickness,  
and have a small mounting area (7.5x6.0mm)  
enabling flexible PCB design.  
4. The bandwidth ranges from A to E.  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
6dB  
Stop  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Ripple  
(dB)  
GDT Deviation  
(µs)  
Part Number  
Frequency (fo) Bandwidth Bandwidth  
(kHz)  
(kHz)  
(kHz)  
455  
2.0kꢀH  
fn 17.5  
min.  
fn 40.0 max.  
25 min.  
4.0 max.  
1.0 max.  
15.0 max.  
CFUKF455KA2X-R0  
CFUKF455KB4X-R0  
CFUKF455KC4X-R0  
CFUKF455KD1X-R0  
CFUKF455KE1X-R0  
1000  
1000  
1000  
1500  
1500  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 12kꢀH] [within fn 12kꢀH]  
455  
1.5kꢀH  
fn 15.0  
min.  
fn 35.0 max.  
25 min.  
5.0 max.  
1.0 max.  
15.0 max.  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 10kꢀH] [within fn 10kꢀH]  
455  
1.5kꢀH  
fn 12.5  
min.  
fn 30.0 max.  
25 min.  
6.0 max.  
1.0 max.  
15.0 max.  
[within fn 8kꢀH]  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 8kꢀH]  
455  
1.0kꢀH  
fn 10.0  
min.  
fn 25.0 max.  
23 min.  
7.0 max.  
1.0 max.  
20.0 max.  
[within fn 7kꢀH]  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 7kꢀH]  
455  
1.0kꢀH  
fn 7.5  
min.  
fn 20.0 max.  
23 min.  
8.0 max.  
1.0 max.  
20.0 max.  
[within fn 5kꢀH]  
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 5kꢀH]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kꢀH.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(2)  
Rg  
RF Voltmeter  
Connection  
E1  
R2  
E2  
(ꢀ)  
S.S.G.  
±dBm  
(1): Input  
(2): Output  
(ꢀ): Ground  
Rg+R1=R2=Input/Output Impedance  
11  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFUKF455KE1X-R0  
CFUKF455KE1X-R0  
±
2±±  
15±  
±
1±  
2±  
ꢀ±  
4±  
1±  
2±  
ꢀ±  
4±  
1±±  
5±  
6±  
5±  
6±  
4
7±  
7±  
5±  
8±  
9±  
8±  
9±  
1±±  
2±±  
1±±  
±
4ꢀ±  
455  
48±  
ꢀ±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
Frequency (kHz)  
Frequency (kHz)  
12  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL kHz SMD Type CFWKA Series  
r
The CFWKA series is comprised of small, high-performance,  
thin (3.0mm) filters consisting of 6 ceramic elements.  
The filters are recommend for pager or hand-held  
cellular phones.  
MARKING  
EIAJ  
CODE  
Dot marking  
Sealing  
1.2 0.1  
C0.3  
1.2 0.1  
1.2 0.1  
1.2 0.1  
Features  
c
5.5 3.0  
11.5  
5.5 3.0  
1.5 0.3  
Sealing  
3.0  
1. The filters are mountable by automatic placers.  
1.5 0.3  
5
2. The filters can be reflow soldered.  
(1): Input  
(2): Output  
(3)(4): Ground  
3. They are slim, at only 3.0mm maximum thickness.  
4. The filters are wide bandwidth, flat GDT within  
pass band.  
(1)  
(4)  
(2)  
(3)  
Tolerance 0.3mm  
in mm  
(
)
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Nominal Center  
3dB  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Stop Band Att.(2)  
(dB)  
Insertion Loss  
(dB)  
Ripple  
(dB)  
Part Number  
Frequency (fn) Bandwidth Bandwidth  
(kHz)  
(kHz)  
(kHz)  
fn±10.0  
min.  
fn±20.0 max.  
[within 50dB] [within fn±100kꢀH]  
50 min.  
4.0 max.  
3.0 max.  
CFWKA450KDFA-R0  
CFWKA450KEFA-R0  
CFWKA450KEFA001-R0  
CFWKA450KFFA-R0  
CFWKA450KGFA-R0  
450.0  
-
-
1500  
1500  
1500  
1500  
1500  
[at minimum loss point] [within fn±±kꢀH]  
fn±±.5  
min.  
fn±15.0 max.  
[within 50dB] [within fn±100kꢀH]  
50 min.  
6.0 max.  
3.0 max.  
450.0  
450.0  
450.0  
450.0  
-
-
[at minimum loss point] [within fn±5kꢀH]  
fn±6.5  
min.  
fn±15.0 max.  
55 min.  
50 min.  
4.0 max.  
[at fn]  
3.0 max.  
[within fn±6.5kꢀH]  
-
[within 50dB] [fn±18 to ±33kꢀH] [within fn±100kꢀH]  
fn±6.0  
min.  
fn±12.5 min.  
[within 50dB] [within fn±100kꢀH]  
50 min.  
6.0 max.  
3.0 max.  
-
-
-
-
[at minimum loss point] [within fn±4kꢀH]  
fn±4.5  
min.  
fn±11.0 max.  
[within 50dB] [within fn±100kꢀH]  
50 min.  
6.0 max.  
2.0 max.  
[at minimum loss point] [within fn±3kꢀH]  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(4)  
(2)  
(3)  
Rg  
E1  
RF Voltmeter  
Connection  
R2  
E2  
S.S.G.  
0dBm  
(1): Input  
(2): Output  
(3)(4): Ground  
Rg+R1=R2=Input/Output Impedance  
13  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFWKA450KEFA001-R0  
CFWKA450KEFA001-R0  
0
0
400  
300  
200  
100  
0
10  
4
8
20  
30  
40  
12  
16  
50  
60  
20  
24  
28  
32  
36  
70  
80  
5
90  
40  
100  
440.0  
450.0  
460.0  
430  
455  
480  
Frequency (kHz)  
Frequency (kHz)  
CFWKA450KEFA001-R0  
0
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
200  
300  
400  
500  
600  
700  
800  
900  
1000  
Frequency (kHz)  
14  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL kHz SMD Type CFWKA_Y Series  
r
The CFWKA_Y series is comprised of small, high-  
performance, thin (3.0mm) filters consisting of 6  
ceramic elements. The filters are recommend for  
digital communication applications and are perfect  
in hand-held cellular phones.  
Y50  
B 1  
EIAJ  
CODE  
Dot marking  
Sealing  
C0.3 1.2 0.1  
1.5 0.3  
1.2 0.1  
1.2 0.1  
1.2 0.1  
5.5 3.0  
11.5  
5.5 3.0  
Sealing  
3.0  
1.5 0.3  
Features  
c
1. The filters are mountable by automatic placers, and  
(1)  
(4)  
(2)  
(3)  
(1): Input  
(2): Output  
(3)(4): Ground  
can be reflow soldered.  
2. They are slim, at only 3.0mm maximum thickness.  
3. The filters are wide bandwidth, flat GDT within  
pass band.  
Tolerance 0.3mm  
in mm  
6
(
)
4. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Nominal Center  
3dB  
6dB  
Stop  
Stop Band  
Attenuation  
(dB)  
Spurious  
Response  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
GDT Deviation  
(µs)  
Part Number  
Frequency (fn) Bandwidth Bandwidth Bandwidth  
(kHz)  
(kHz)  
(kHz)  
(kHz)  
fn 11.5  
min.  
fn 13.0  
min.  
fn 30.0 max.  
45 min.  
4.0 max.  
20 min.  
30.0 max.  
CFWKA450KBFY001-R0  
450.0  
1000  
[within 50dB] [within fn 100kꢀH] [at minimum loss point] [within 0.1 to 1.0MꢀH] [within fn 10kꢀH]  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(4)  
(2)  
(3)  
Rg  
E1  
RF Voltmeter  
Connection  
R2  
E2  
S.S.G.  
0dBm  
(1): Input  
(2): Output  
(3)(4): Ground  
Rg+R1=R2=Input/Output Impedance  
15  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
0
0
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
200  
150  
100  
50  
2
4
6
8
10  
12  
14  
16  
18  
20  
0
420  
430  
440  
450  
460  
470  
480  
200  
300  
400  
500  
600  
700  
800  
900  
1000  
Frequency (kHz)  
Frequency (kHz)  
6
16  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
kHz SMD Type CERAFIL Notice  
r
SFPKA/CFUKG/CFUKF Series Notice  
c
o Soldering and Mounting  
1. Standard Reflow Soldering Conditions  
(1) Reflow  
Filter is soldered twice within the following temperature  
0EAK  
conditions.  
(260ꢀC max.)  
260  
230  
Heating  
(230ꢀC)  
Pre-heating  
100  
(150-180ꢀC)  
Gradual  
Cooling  
30 sec.  
min.  
60-120 sec.  
ꢄꢅ SECꢃ  
max.  
120 sec.  
min.  
(2) Soldering Iron  
Electrode is directly soldered with the tip of soldering iron  
at +350 5ꢀC for 3.0 0.5 seconds.  
(3) Other  
Do not use strong acidity flux, more than 0.2wt% chlorine  
content, in reflow soldering.  
2. Wash  
(1) Cleaning Solvent  
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),  
7ATER ꢀ$EMINERALIZED 7ATERꢁꢂ #LEANING 7ATER 3OLUTION  
(Cleanthrough-750H, Pine Alpha 100S), Silicon  
ꢀ4ECHNOCARE &27ꢁ  
(2) Cleaning Conditions  
s )MMERSION 7ASH  
2 minutes max. in above solvent at +60ꢀC max.  
s 3HOWER OR 2INSE 7ASH  
2 minutes max. in above solvent at +60ꢀC max.  
(3) Notice  
s 7HEN COMPONENTS ARE IMMERSED IN SOLVENTꢂ BE SURE TO  
maintain the temperature of components below the  
temperature of solvent.  
s 0LEASE DO NOT USE ULTRASONIC CLEANINGꢃ  
s 4OTAL WASHING TIME SHOULD BE ꢄ MINUTES MAXIMUMꢃ  
s 0LEASE ENSURE THE COMPONENT IS THOROUGHLY EVALUATED IN  
your application circuit.  
s 0LEASE DO NOT USE CHLORINEꢂ PETROLEUM OR ALKALI CLEANING  
solvent.  
s )F YOU PLAN TO USE ANY OTHER TYPES OF SOLVENTSꢂ PLEASE  
consult with Murata or Murata representative prior to  
using.  
3. Coating  
In case of overcoating the component, conditions such as  
material of resin, cure temperature, and so on should be  
evaluated well.  
Continued on the following page.  
17  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
kHz SMD Type CERAFIL Notice  
r
Continued from the preceding page.  
o Storage and Operating Conditions  
1. Product Storage Condition  
(2) Please do not put the products directly on the floor  
without anything under them to avoid damp places  
and/or dusty places.  
Please store the products in a room where the  
temperature/humidity is stable, and avoid such places  
where there are large temperature changes. Please store  
the products under the following conditions:  
Temperature: -10 to +40°C  
(3) Please do not store the products in places such as a  
damp heated place or any place exposed to direct  
sunlight or excessive vibration.  
Humidity: 15 to 85% R.H.  
(4) Please use the products immediately after the  
package is opened, because the characteristics may  
be reduced in quality and/or be degraded in  
solderability due to storage under poor condition.  
(5) Please do not drop the products to avoid cracking of  
ceramic element.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six months  
after delivery under the conditions of a sealed and  
unopened package. Please use the products within six  
months after delivery. If you store the products for a long  
time (more than six months), use carefully because  
solderability may be degraded due to storage under poor  
conditions.  
4. Other  
Please be sure to consult with our sales representative or  
engineer whenever the products are to be used in  
conditions not listed above.  
Please confirm solderability and characteristics for the  
products regularly.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Sulfides and so on), because the characteristics may  
be reduced in quality and may be degraded in  
solderability due to storage in a chemical atmosphere.  
o Rating  
The component may be damaged if excessive mechanical  
stress is applied.  
o Handling  
1. If the component is cleaned, please confirm that the  
3. For safety purposes, connect the output of filters to the IF  
amplifier through a D.C. blocking capacitor. Avoid  
reliability has not been degraded.  
2. The components, packed in a moisture-proof bag (dry  
pack), are sensitive to moisture. The following treatment  
is required before applying reflow soldering, to avoid  
package cracks or reliability degradation caused by  
thermal stress. When unpacked, store the component in  
an atmosphere of below 25°C and below 65%R.H., and  
solder within 48 hours.  
applying a direct current to the output of ceramic filters.  
18  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
kHz SMD Type CERAFIL Notice  
r
CFWKA Series Notice  
c
o Soldering and Mounting  
1. Standard Reflow Soldering Conditions  
(1) Reflow  
Filter is soldered twice within the following temperature  
Peak  
conditions.  
(260ꢀC max.)  
260  
230  
Heating  
(230ꢀC)  
Pre-heating  
100  
(150-180ꢀC)  
Gradual  
Cooling  
30 sec.  
min.  
60-120 sec.  
40 sec.  
max.  
120 sec.  
min.  
(2) Soldering Iron  
Electrode is directly soldered with the tip of soldering iron  
at +350 5ꢀC for 3.0 0.5 seconds.  
(3) Other  
Do not use strong acidity flux, more than 0.2wt% chlorine  
content, in reflow soldering.  
2. Wash  
Do not clean or wash the component as it is not  
hermetically sealed.  
3. Coating  
Do not apply conformal coating onto the component as  
it's not hermetically sealed.  
o Storage and Operating Conditions  
1. Product Storage Condition  
Sulfides and so on), because the characteristics may  
be reduced in quality and may be degraded in  
solderability due to storage in a chemical atmosphere.  
(2) Please do not put the products directly on the floor  
without anything under them to avoid damp places  
and/or dusty places.  
Please store the products in a room where the  
temperature/humidity is stable, and avoid places where  
there are large temperature changes. Please store the  
products under the following conditions:  
Temperature: -10 to + 40ꢀC  
Humidity: 15 to 85% R.H.  
(3) Please do not store the products in places such as a  
damp heated place or any place exposed to direct  
sunlight or excessive vibration.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six months  
after delivery under the conditions of a sealed and  
unopened package. Please use the products within six  
months after delivery. If you store the products for a long  
time (more than six months), use carefully because the  
solderability may be degraded due to storage under poor  
conditions.  
(4) Please use the products immediately after the  
package is opened, because the characteristics may  
be reduced in quality and/or be degraded in  
solderability due to storage under poor condition.  
(5) Please do not drop the products to avoid cracking of  
ceramic element.  
Please confirm solderability and characteristics for the  
products regularly.  
4. Other  
Please be sure to consult with our sales representative or  
engineer whenever the products are to be used in  
conditions not listed above.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Continued on the following page.  
19  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
kHz SMD Type CERAFIL Notice  
r
Continued from the preceding page.  
o Rating  
The component may be damaged if excessive mechanical  
stress is applied.  
o Handling  
For safety purposes, connect the output of filters to the IF  
amplifier through a D.C. blocking capacitor. Avoid applying a  
direct current to the output of ceramic filters.  
20  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL MHz SMD Type SFECF10M7 Series  
r
1.ꢀ 0.1  
ꢀ.45 0.ꢁ  
SFECF10M7 series for FM receivers are small,  
high-performance and super thin (1.4mm max.) filters.  
The piezoelectric element is sandwiched by the  
ceramics substrate.  
Input electrode  
marker  
(0.6)  
(0.6)(0.6)  
0 to 0.4  
0 to 0.4  
They have 1.4mm max. thickness and a small mounting  
area (3.45x3.1mm).  
(1.ꢁ8)(1.ꢁ8)  
SFECF series and CDSCB series (MHz Discriminator)  
enable customers to make VICS/RKE/TPMS set very thin  
and small.  
0.ꢀ min. 0.ꢀ min.  
0.65 0.ꢀ 0.7 0.ꢀ 0.65 0.ꢀ  
(1): Input  
(ꢁ)(5): Ground  
(ꢀ)(4): No connect  
(6): Output  
(1)  
(6)  
(ꢀ)  
(4)  
(ꢁ)  
(5)  
: EIAJ Monthly Code  
): Reference  
(
(1.ꢁ8)(1.ꢁ8)  
0 to 0.ꢀ5  
Features  
c
(in mm)  
0 to 0.ꢀ5  
1. The filters are mountable by automatic placers.  
2. They are slim, at only 1.4mm max. thickness, and  
have a small mounting area (3.45x3.1mm) enabling  
flexible PCB design.  
7
3. Various bandwidths are available. Select a  
suitable type in accordance with the desired  
selectivity.  
4. Operating Temperature Range:  
-20 to +80 (°C)(Standard Type)  
-40 to +85 (°C)(High-reliability Type)  
Storage Temperature Range:  
-40 to +85 (°C)(Standard Type)  
-55 to +85 (°C)(High-reliability Type)  
Standard Type  
Center  
Nominal Center  
3dB  
Bandwidth  
(kHz)  
Spurious  
Attenuation  
(1) (dB)  
Spurious  
Attenuation  
(2) (dB)  
Input/Output  
Impedance  
(ohm)  
Attenuation Insertion Loss Ripple  
Part Number  
Frequency Frequency (fn)  
(kHz)  
(dB)  
(dB)  
(fo) (MHz)  
(MHz)  
10.700  
30kHz  
30 min.  
30 min.  
SFECF10M7HA00-R0  
SFECF10M7HF00-R0  
SFECF10M7GA00-R0  
SFECF10M7GF00-R0  
SFECF10M7FA00-R0  
SFECF10M7FF00-R0  
SFECF10M7EA00-R0  
SFECF10M7DA0001-R0  
SFECF10M7DF00-R0  
-
180 40kHz  
fn 25 min.  
230 50kHz  
fn 45 min.  
280 50kHz  
fn 65 min.  
330 50kHz  
420 min.  
470 max.  
4.0 2.0dB  
1.0 max.  
330  
330  
330  
330  
330  
330  
330  
330  
330  
[within 9MHz to fo] [within fo to 12MHz]  
8.0max.  
[at fn]  
30 min.  
25 min.  
-
10.700  
510 max.  
510 max.  
560 max.  
590 max.  
620 max.  
700 max.  
950 max.  
990 max.  
1.0 max.  
1.0 max.  
1.0 max.  
1.0 max.  
1.0 max.  
1.0 max.  
3.0 max.  
3.0 max.  
[within 9MHz to fn] [within fn to 12MHz]  
10.700  
30kHz  
30 min.  
30 min.  
-
3.5 2.0dB  
[within 9MHz to fo] [within fo to 12MHz]  
8.0max.  
[at fn]  
30 min.  
25 min.  
-
10.700  
[within 9MHz to fn] [within fn to 12MHz]  
10.700  
30kHz  
30 min.  
30 min.  
-
3.0 2.0dB  
[within 9MHz to fo] [within fo to 12MHz]  
7.0max.  
[at fn]  
30 min.  
25 min.  
-
10.700  
[within 9MHz to fn] [within fn to 12MHz]  
10.700  
30kHz  
30 min.  
30 min.  
-
3.0 2.0dB  
3.0 2.0dB  
[within 9MHz to fo] [within fo to 12MHz]  
10.700  
30kHz  
35 min.  
25 min.  
-
[within 9MHz to fo] [within fo to 12MHz]  
6.0max.  
[at fn]  
20 min.  
20 min.  
-
10.700  
fn 150 min.  
[within 9MHz to fn] [within fn to 12MHz]  
Area of Attenuation: [within 20dB]  
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.  
Center frequency (fo) defined by center of 3dB bandwidth.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
21  
• Please reaꢃ rating anꢃ !CAUTION (for storage, operating, rating, solꢃering, mounting anꢃ hanꢃling) in this catalog to prevent smoꢀing anꢃ/or burning, etc.  
• This catalog has only typical specifications because there is no space for ꢃetaileꢃ specifications. Therefore, please review our proꢃuct specifications or consult the approval sheet for proꢃuct specifications before orꢃering. Nov.ꢂꢁ,ꢂ011  
!Note  
P02E.pꢃf  
High-reliability Type  
Center  
Nominal Center  
3dB  
Spurious  
Attenuation  
(1) (dB)  
Spurious  
Attenuation  
(2) (dB)  
Input/Output  
Impedance  
(ohm)  
Attenuation Insertion Loss Ripple  
Part Number  
Frequency Frequency (fn) Bandwidth  
(kHz)  
(dB)  
(dB)  
(fo) (MHz)  
(MHz)  
(kHz)  
10.700  
±±0ꢀkH  
±0 min.  
±0 min.  
SFECF10M7HA00S0-R0  
SFECF10M7HF00S0-R0  
SFECF10M7GA00S0-R0  
SFECF10M7GF00S0-R0  
SFECF10M7FA00S0-R0  
SFECF10M7FF00S0-R0  
SFECF10M7EA00S0-R0  
SFECF10M7DF00S0-R0  
-
180 ±ꢁ0ꢀkH  
ꢁ70 max.  
ꢁ.0±ꢂ.0ꢃd  
1.0 max.  
±±0  
±±0  
±±0  
±±0  
±±0  
±±0  
±±0  
±±0  
[within 9MkH to fo] [within fo to 1ꢂMkH]  
8.0max.  
[at fn]  
±0 min.  
ꢂ2 min.  
-
10.700  
fn±ꢂ2 min.  
ꢂ±0 ±20ꢀkH  
fn±ꢁ2 min.  
ꢂ80 ±20ꢀkH  
fn±62 min.  
±±0 ±20ꢀkH  
fn±1ꢁ2 min.  
210 max.  
210 max.  
260 max.  
290 max.  
6±0 max.  
700 max.  
990 max.  
1.0 max.  
1.0 max.  
1.0 max.  
1.0 max.  
1.0 max.  
1.0 max.  
±.0 max.  
[within 9MkH to fn] [within fn to 1ꢂMkH]  
10.700  
±±0ꢀkH  
±0 min.  
±0 min.  
-
±.2±ꢂ.0ꢃd  
[within 9MkH to fo] [within fo to 1ꢂMkH]  
8.0max.  
[at fn]  
±0 min.  
ꢂ2 min.  
-
10.700  
-
[within 9MkH to fn] [within fn to 1ꢂMkH]  
10.700  
±±0ꢀkH  
±0 min.  
±0 min.  
±.0±ꢂ.0ꢃd  
[within 9MkH to fo] [within fo to 1ꢂMkH]  
7.0max.  
[at fn]  
±0 min.  
ꢂ2 min.  
-
10.700  
-
[within 9MkH to fn] [within fn to 1ꢂMkH]  
10.700  
±±0ꢀkH  
±0 min.  
±0 min.  
±.0±ꢂ.0ꢃd  
[within 9MkH to fo] [within fo to 1ꢂMkH]  
6.0max.  
[at fn]  
ꢂ0 min.  
ꢂ0 min.  
-
10.700  
[within 9MkH to fn] [within fn to 1ꢂMkH]  
7
Area of Attenuation: [within ꢂ0ꢃd]  
Area of Insertion Loss: at minimum loss point Area of Ripple: within ±ꢃd d.W.  
Center frequency (fo) ꢃefineꢃ by center of ±ꢃd banꢃwiꢃth.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocꢀing capacitor. Avoiꢃ applying a ꢃirect current to the output of ceramic filters.  
The orꢃer quantity shoulꢃ be an integral multiple of the "Minimum Quantity" shown in pacꢀage page in this catalog.  
Test Circuit  
c
(3)  
(2)  
(4)  
(5)  
R1  
(1)  
(6)  
Rg  
RF  
Voltmeter  
E1  
C2  
R2  
E2  
S.S.G.  
Rg = 50Ω R1 = 280Ω 5ꢀ R2 = 330Ω 5ꢀ  
C2 = 10 2 ꢁF (ꢂInlꢃudIg ꢄtrꢅa nꢅꢁꢅndtꢅIne ꢅIu ꢂIꢁꢃt nꢅꢁꢅndtꢅIne  
of RF Volt Meter)  
(1): ꢂIꢁꢃt  
(2)(5): GroꢃIu  
(3)(4): No noIIent  
(6): Oꢃtꢁꢃt  
E1: S.S.G. Oꢃtꢁꢃt Voltꢅge  
Frequency Characteristics  
c
SFECF10M7FA00-R0  
SFECF10M7FA00-R0  
0
7.0  
6.0  
5.0  
4.0  
3.0  
2.0  
1.0  
0
10  
20  
30  
40  
50  
60  
1
2
3
4
5
6
7
0.0  
70  
10.300  
10.500  
10.700  
10.900  
11.100  
8.700  
9.700  
10.700  
11.700  
12.700  
FreqꢃeIna (MHz)  
FreqꢃeIna (MHz)  
ꢂꢂ  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL MHz SMD Type SFSCE10M7 Series  
r
4.5  
0.4  
(1)  
(4)  
(2)  
SFSCE series are chip surface mount filters available for  
3dB bandwidth at 700kHz to 1.3MHz. (more than twice  
width compared with current types)  
They have 1.0mm max. thickness and small mounting area  
(4.5x3.8mm).  
(3)  
(4.0)  
Features  
c
(4-R0.3)  
(1): Input  
(2): Output  
(3): No Connect  
(4): Ground  
1. The filters are mountable by automatic placers.  
2. They are slim, at only 1.0mm max. thickness, and  
have a small mounting area (4.5x3.8mm) enabling  
flexible PCB design.  
(0.3)  
(4)  
(1)  
(3)  
(2)  
: EIAJ Monthly Code  
Tolerance unless  
*
otherwise specified: 0.1  
(
): Reference  
0.6 1.1  
0.15  
(2.25)  
(in mm)  
3. Available lead (Pb) free solder reflow.  
4. Operating temperature range:  
-20 to +80 (°C)  
Storage temperature range:  
-40 to +85 (°C)  
8
Applications  
c
1. SS digital communication system  
2. Digital wireless audio  
3. PHS Evolution system  
4. RFID Reader Writer  
5. RKE  
Nominal Center  
3dB  
Stop  
Bandwidth  
(MHz)  
Spurious  
Response  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Ripple  
(dB)  
GDT Deviation  
(µs)  
Part Number  
Frequency (fn) Bandwidth  
(MHz)  
(kHz)  
fn 500.0  
min.  
2.2 max. (Total)  
[within 20dB]  
6.0 max.  
2.0 max.  
30/25 min.  
0.6 max.  
SFSCE10M7WF03-R0  
SFSCE10M7WF04-R0  
SFSCE10M7WF05-R0  
10.700  
470  
470  
470  
[at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn 400kHz]  
fn 400.0  
min.  
1.8 max. (Total)  
[within 20dB]  
6.0 max.  
1.5 max.  
35/25 min.  
0.6 max.  
10.700  
10.700  
[at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn 325kHz]  
fn 325.0  
min.  
1.7 max. (Total)  
[within 20dB]  
6.0 max.  
1.5 max.  
40/30 min.  
0.6 max.  
[at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn 250kHz]  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
(4)  
(1)  
(3)  
(2)  
R1  
Rg  
R2  
C2  
S.S.G.  
RF  
Voltmeter  
(1): Input  
(2): Output  
(3): No Connect  
(4): Ground  
R1+Rg=R2=Input/Output Impedance, Rg=50Ω  
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)  
E1: S.S.G. Output Voltage  
23  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
SFSCE10M7WF03-R0  
SFSCE10M7WF03-R0  
0
2
4
6
8
2.0  
1.6  
1.2  
0.8  
0.4  
0
20  
40  
60  
80  
10  
0.0  
6.700  
8.700  
10.700  
12.700  
14.700  
9.500  
9.900  
10.300  
10.700  
11.100  
11.500  
11.900  
Frequency (MHz)  
Frequency (MHz)  
8
24  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
MHz SMD Type CERAFIL Notice  
r
SFECF10M7 Series Notice  
c
o Soldering and Mounting  
1. Standard Reflow Soldering Conditions  
(1) Reflow  
Filter is soldered twice within the following temperature  
Peak  
(260ꢀC max.)  
conditions.  
260  
230  
Heating  
(230ꢀC)  
Pre-heating  
(150-180ꢀC)  
100  
Gradual  
Cooling  
30 sec.  
min.  
40 sec.  
max.  
120 sec.  
min.  
60-120 sec.  
(2) Soldering Iron  
Filter is soldered at +350 5ꢀC for 3.0 0.5 seconds. ꢁhe  
soldering iron should not touch the filter while soldering.  
(3) Condition for Placement Machines  
ꢁhe component is recommended with placement  
machines that employ optical placement capabilities. ꢁhe  
component might be damaged by excessive mechanical  
force. Please make sure that you have evaluated by  
using placement machines before going into mass  
production. Do not use placement machines that utilize  
mechanical positioning. Please contact Murata for details  
beforehand.  
(4) Other  
(a) ꢁhe component may be damaged if excess  
[Component Direction]  
mechanical stress is applied to it mounted on the  
printed circuit board.  
Place the  
component  
lateral to the  
direction in  
which stress  
acts.  
(b) Design layout of components on the PC board to  
minimize the stress imposed on the warp or flexure of  
the board.  
[Component Layout Close to Board]  
(c) After installing components, if solder is excessively  
applied to the circuit board, mechanical stress will  
cause destruction resistance characteristics to  
degrade. ꢁo prevent this, be extremely careful in  
determining shape and dimension before designing  
the circuit board diagram.  
Perforation  
B
Susceptibility to  
stress is in the order  
of : A>C>B  
C
A
Slit  
(d) When the positioning claws and pick-up nozzle are  
worn, the load is applied to the components while  
positioning is concentrated on positioning accuracy,  
etc. Careful checking and maintenance are necessary  
to prevent unexpected trouble.  
(e) When correcting components with a soldering iron,  
the tip of the soldering iron should not directly touch  
the component. Depending on the soldering  
conditions, the effective area of terminations may be  
reduced. Solder containing Ag should be used to  
prevent the electrode erosion.  
(f) Do not use strong acidity flux, more than 0.2wt%  
chlorine content, in reflow soldering.  
Continued on the following page.  
25  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
MHz SMD Type CERAFIL Notice  
r
Continued from the preceding page.  
2. Wash  
Do not clean or wash the component as it is not  
hermetically sealed.  
3. Coating  
In case of overcoating the component, conditions such as  
material of resin, cure temperature, and so on should be  
evaluated well.  
o Storage and Operating Conditions  
1. Product Storage Condition  
(2) Please do not put the products directly on the floor  
without anything under them to avoid damp places  
and/or dusty places.  
Please store the products in a room where the  
temperature/humidity is stable, and avoid places where  
there are large temperature changes. Please store the  
products under the following conditions:  
Temperature: -10 to +40°C  
(3) Please do not store the products in places such as a  
damp heated place or any place exposed to direct  
sunlight or excessive vibration.  
Humidity: 15 to 85% R.H.  
(4) Please use the products immediately after the  
package is opened, because the characteristics may  
be reduced in quality and/or be degraded in  
solderability due to storage under poor condition.  
(5) Please do not drop the products to avoid cracking of  
ceramic element.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six months  
after delivery under the conditions of a sealed and  
unopened package. Please use the products within six  
months after delivery. If you store the products for a long  
time (more than six months), use carefully because  
solderability may be degraded due to storage under poor  
conditions.  
4. Other  
Please be sure to consult with our sales representative or  
engineer whenever the products are to be used in  
conditions not listed above.  
Please confirm solderability and characteristics for the  
products regularly.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Sulfides and so on), because the characteristics may  
be reduced in quality and may be degraded in  
solderability due to storage in a chemical atmosphere.  
o Rating  
The component may be damaged if excessive mechanical  
stress is applied.  
o Handling  
1. Accurate test circuit values are required to measure  
electrical characteristics. Miscorrelation may be caused if  
there is any deviation, especially stray capacitance, from  
the test circuit in the specification.  
3. For safety purposes, connect the output of filters to the IF  
amplifier through a D.C. blocking capacitor. Avoid  
applying a direct current to the output of ceramic filters.  
2. The components, packed in a moisture proof bag (dry  
pack), are sensitive to moisture. The following treatment  
is required before applying reflow soldering, to avoid  
reliability degradation caused by thermal stress. When  
unpacked, store the component in an atmosphere of  
reflow 30°C and below 60%R.H., and solder within 1  
week.  
26  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
MHz SMD Type CERAFIL Notice  
r
SFSCE10M7WF03-R0 Notice  
c
o Soldering and Mounting  
1. Standard Reflow Soldering Conditions  
(1) Reflow  
Filter is soldered twice within the following temperature  
Peak  
conditions.  
(2405C max.)  
240  
2ꢀ0  
Heating  
(2ꢀ05C)  
Pre-heating  
100  
(1±0-1805C)  
Gradual  
Cooling  
ꢀ0 sec.  
min.  
60-120 sec.  
ꢀ0 sec.  
max.  
120 sec.  
min.  
(2) Soldering Iron  
Filter is soldered at +280±±5C for ꢀ.0±0.± seconds. ꢁhe  
soldering iron should not touch the filter while soldering.  
(ꢀ) Condition for Placement Machines  
ꢁhe component is recommended with placement  
machines that employ optical placement capabilities. ꢁhe  
component might be damaged by excessive mechanical  
force. Please make sure that you have evaluated by  
using placement machines before going into mass  
production. Do not use placement machines that utilize  
mechanical positioning. Please contact Murata for details  
beforehand.  
(4) Other  
(a) ꢁhe component may be damaged if excess  
[Component Layout Close to Board]  
mechanical stress is applied to it mounted on the  
printed circuit board.  
Susceptibility to  
stress is in the order  
of : A>C>B  
(b) Design layout of components on the PC board to  
minimize the stress imposed on the warp or flexure of  
the board.  
Perforation  
A
B
C
Slit  
(c) After installing components, if solder is excessively  
applied to the circuit board, mechanical stress will  
cause destruction resistance characteristics to  
degrade. ꢁo prevent this, be extremely careful in  
determining shape and dimension before designing  
the circuit board diagram.  
[Component Direction]  
Place the compon-  
ent laterally to the  
direction in which  
stress acts.  
(d) When the positioning claws and pick-up nozzle are  
worn, the load is applied to the components while  
positioning is concentrated on positioning accuracy,  
etc. Careful checking and maintenance are necessary  
to prevent unexpected trouble.  
(e) When correcting components with a soldering iron,  
the tip of the soldering iron should not directly touch  
the component.  
(f) Do not use strong acidity flux, more than 0.2wt%  
chlorine content, in reflow soldering.  
Continued on the following page.  
27  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
MHz SMD Type CERAFIL Notice  
r
Continued from the preceding page.  
2. Wash  
Do not clean or wash the component as it is not  
hermetically sealed.  
3. Coating  
In case of overcoating the component, conditions such as  
material of resin, cure temperature, and so on should be  
evaluated well.  
o Storage and Operating Conditions  
1. Product Storage Condition  
(2) Please do not put the products directly on the floor  
without anything under them to avoid damp places  
and/or dusty places.  
Please store the products in a room where the  
temperature/humidity is stable, and avoid places where  
there are large temperature changes. Please store the  
products under the following conditions:  
Temperature: -10 to + 40°C  
(3) Please do not store the products in places such as a  
damp heated place or any place exposed to direct  
sunlight or excessive vibration.  
Humidity: 15 to 85% R.H.  
(4) Please use the products immediately after the  
package is opened, because the characteristics may  
be reduced in quality and/or be degraded in  
solderability due to storage under poor condition.  
(5) Please do not drop the products to avoid cracking of  
ceramic element.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six months  
after delivery under the conditions of a sealed and  
unopened package. Please use the products within six  
months after delivery. If you store the products for a long  
time (more than six months), use carefully because  
solderability may be degraded due to storage under poor  
conditions.  
4. Other  
Please be sure to consult with our sales representative or  
engineer whenever the products are to be used in  
conditions not listed above.  
Please confirm solderability and characteristics for the  
products regularly.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Sulfides and so on), because the characteristics may  
be reduced in quality and may be degraded in  
solderability due to storage in a chemical atmosphere.  
o Rating  
The component may be damaged if excessive mechanical  
stress is applied.  
o Handling  
1. Accurate test circuit values are required to measure  
electrical characteristics. Miscorrelation may be caused if  
there is any deviation, especially stray capacitance, from  
the test circuit in the specification.  
2. For safety purposes, connect the output of filters to the IF  
amplifier through a D.C. blocking capacitor. Avoid  
applying a direct current to the output of ceramic filters.  
28  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
MHz SMD Type CERAFIL Notice  
r
SFSCE10M7WF04/05-R0 Notice  
c
o Soldering and Mounting  
1. Standard Reflow Soldering Conditions  
(1) Reflow  
Filter is soldered twice within the following temperature  
Peak  
conditions.  
(2605C max.)  
260  
2ꢀ0  
Heating  
(2ꢀ05C)  
Pre-heating  
100  
(1±0-1805C)  
Gradual  
Cooling  
ꢀ0 sec.  
min.  
60-120 sec.  
40 sec.  
max.  
120 sec.  
min.  
(2) Soldering Iron  
Filter is soldered at +280±±5C for ꢀ.0±0.± seconds. ꢁhe  
soldering iron should not touch the filter while soldering.  
(ꢀ) Condition for Placement Machines  
ꢁhe component is recommended with placement  
machines that employ optical placement capabilities. ꢁhe  
component might be damaged by excessive mechanical  
force. Please make sure that you have evaluated by  
using placement machines before going into mass  
production. Do not use placement machines that utilize  
mechanical positioning. Please contact Murata for details  
beforehand.  
(4) Other  
(a) ꢁhe component may be damaged if excess  
[Component Layout Close to Board]  
mechanical stress is applied to it mounted on the  
printed circuit board.  
Susceptibility to  
stress is in the order  
of : A>C>B  
(b) Design layout of components on the PC board to  
minimize the stress imposed on the warp or flexure of  
the board.  
Perforation  
A
B
C
Slit  
(c) After installing components, if solder is excessively  
applied to the circuit board, mechanical stress will  
cause destruction resistance characteristics to  
degrade. ꢁo prevent this, be extremely careful in  
determining shape and dimension before designing  
the circuit board diagram.  
[Component Direction]  
Place the compon-  
ent laterally to the  
direction in which  
stress acts.  
(d) When the positioning claws and pick-up nozzle are  
worn, the load is applied to the components while  
positioning is concentrated on positioning accuracy,  
etc. Careful checking and maintenance are necessary  
to prevent unexpected trouble.  
(e) When correcting components with a soldering iron,  
the tip of the soldering iron should not directly touch  
the component.  
(f) Do not use strong acidity flux, more than 0.2wt%  
chlorine content, in reflow soldering.  
Continued on the following page.  
29  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
MHz SMD Type CERAFIL Notice  
r
Continued from the preceding page.  
2. Wash  
Do not clean or wash the component as it is not  
hermetically sealed.  
3. Coating  
In case of overcoating the component, conditions such as  
material of resin, cure temperature, and so on should be  
evaluated well.  
o Storage and Operating Conditions  
1. Product Storage Condition  
(2) Please do not put the products directly on the floor  
without anything under them to avoid damp places  
and/or dusty places.  
Please store the products in a room where the  
temperature/humidity is stable, and avoid places where  
there are large temperature changes. Please store the  
products under the following conditions:  
Temperature: -10 to + 40°C  
(3) Please do not store the products in places such as a  
damp heated place or any place exposed to direct  
sunlight or excessive vibration.  
Humidity: 15 to 85% R.H.  
(4) Please use the products immediately after the  
package is opened, because the characteristics may  
be reduced in quality and/or be degraded in  
solderability due to storage under poor condition.  
(5) Please do not drop the products to avoid cracking of  
ceramic element.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six months  
after delivery under the conditions of a sealed and  
unopened package. Please use the products within six  
months after delivery. If you store the products for a long  
time (more than six months), use carefully because  
solderability may be degraded due to storage under poor  
conditions.  
4. Other  
Please be sure to consult with our sales representative or  
engineer whenever the products are to be used in  
conditions not listed above.  
Please confirm solderability and characteristics for the  
products regularly.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Sulfides and so on), because the characteristics may  
be reduced in quality and may be degraded in  
solderability due to storage in a chemical atmosphere.  
o Rating  
The component may be damaged if excessive mechanical  
stress is applied.  
o Handling  
1. Accurate test circuit values are required to measure  
electrical characteristics. Miscorrelation may be caused if  
there is any deviation, especially stray capacitance, from  
the test circuit in the specification.  
2. For safety purposes, connect the output of filters to the IF  
amplifier through a D.C. blocking capacitor. Avoid  
applying a direct current to the output of ceramic filters.  
30  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
SMD Type CERAFIL Standard Land Pattern Dimensions  
r
SFPKA Series  
CFUKG/CFUKF Series  
c
c
c
c
0.7  
0.7  
6.95  
2.0  
1.2  
1.4  
1.2  
2.475  
1.1  
2.0  
0.925  
2.0  
(in mm)  
(in mm)  
CFWKA Series  
SFECF10M7 Series  
c
11.5  
5.5  
3.0  
3.0  
(6)  
(5)  
(4)  
1.2  
(1)  
(2)  
(3)  
4-R3.0  
0.1  
0.1  
(1): Input  
(2)(5): Ground  
(3)(4): No connect  
(6): Output  
0.8 0.6 0.8 0.6 0.8  
1.8  
(in mm)  
It shows solder resist land pattern.  
(in mm)  
SFSCE10M Series  
1.05  
1.4  
0.1  
0.1  
(4)  
(3)  
(2)  
(1)  
0.5  
(1): Input  
(2): Output  
(3): No Connect  
(4): Ground  
It shows solder resist land pattern.  
(in mm)  
31  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
kHz SMD Type CERAFIL Packaging  
r
Minimum Quantity  
c
Part Number  
ø180mm  
ø330mm  
SFPKA  
CFUKG  
CFUKF  
CFWKA  
1,000  
450  
450  
350  
SFPKA Series  
c
Dimensions of Carrier Tape  
Dimensions of Reel  
Trailer  
160 to 190  
Leader  
Cover film  
4.0 0.1  
+0.1  
ø1.5 -0  
2.0 0.1  
Empty Components  
ø13.0 0.2  
Empty  
240 to 280  
400 to 560  
2.2 0.5  
12.0 0.1  
5.3 0.1  
User direction of feed  
Cover film  
Label  
17.5 0.5  
21.5 1.0  
7.4 0.1  
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ  
(in mm)  
CFUKG/CFUKF Series  
c
Dimensions of Carrier Tape  
Dimensions of Reel  
Trailer  
160 to 190  
Leader  
Cover film  
4.0 0.1  
ø1.5  
2.0 0.1  
+0.1  
-0.0  
Empty Components  
Empty  
160 to 200  
400 to 560  
2.0 0.2  
ø13.0 0.5  
8.0 0.1  
4.2 0.1  
5SER DIRECTION OF FEED  
Cover film  
17.0 1.0  
19.4 0.3  
6.7 0.1  
6.3 0.1  
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ  
(in mm)  
Continued on the following page.  
32  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
kHz SMD Type CERAFIL Packaging  
r
Continued from the preceding page.  
CFWKA Series  
c
Dimensions of Carrier Tape  
Dimensions of Reel  
Trailer  
Leader  
4.0 0.1  
160 to 190  
Cover film  
2.0 0.1  
+0.1  
ø1.5  
-0.0  
Empty Components  
Empty  
240 to 280  
2.0 0.2  
ø1ꢀ.0 0.5  
400 to 560  
25.5 1.0  
29.9 1.0  
0.4 0.1  
ꢀ.2 0.1  
12.0 0.1  
User direction of feed  
Cover film  
8.1 0.1  
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ  
7.7 0.1  
(in mm)  
33  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
MHz SMD Type CERAFIL Packaging  
r
Minimum Quantity  
c
Part Number  
ø180mm  
2,000  
SFECF  
SFSCE  
1,500  
SFECF10M7 Series  
c
Dimensions of Carrier Tape  
Dimensions of Reel  
Trailer  
160 to 190  
Leader  
Cover film  
4.0 0.1  
Chip filter  
ø1.55 0.05 2.0 0.05  
Empty  
240 to 280  
Empty Components  
ø13.0 0.5  
400 to 560  
2.0 0.5  
+0.1  
-0.05  
4.0 0.1  
Peeling strength  
(0.1 to 0.7N)  
3.35  
17.0 1.0  
(3°)  
10° max.  
+1.0  
13.0  
Cover film  
-0  
User direction of feed  
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ  
( ): Reference  
(in mm)  
SFSCE10M7 Series  
c
Dimensions of Carrier Tape  
Dimensions of Reel  
Trailer  
ꢃꢉꢂ TO ꢃꢊꢂ  
,EADER  
Cover film  
ꢁꢀꢂ ꢂꢀꢃ  
ꢂꢀꢈ ꢂꢀꢂꢅ  
ꢄꢀꢂ ꢂꢀꢂꢅ  
’ꢃꢀꢅꢅ ꢂꢀꢂꢅ  
%MPTY  
ꢄꢁꢂ TO ꢄꢇꢂ  
%MPTY #OMPONENTS  
’ꢃꢈꢀꢂ ꢂꢀꢅ  
ꢁꢂꢂ TO ꢅꢉꢂ  
ꢃꢀꢃ ꢂꢀꢃ  
’ꢃꢀꢅꢅ ꢂꢀꢂꢅ  
ꢄꢀꢂ ꢂꢀꢅ  
ꢇꢀꢂ ꢂꢀꢃ  
0EELING STRENGTH  
ꢂꢀꢃ TO ꢂꢀꢆ.  
ꢃꢆꢀꢂ ꢃꢀꢂ  
ꢋꢃꢀꢂ  
ꢃꢈꢀꢂ  
ꢌꢂ  
(3°)  
Cover film  
ꢁꢀꢈ ꢂꢀꢃ  
ꢃꢂ MAXꢀ  
5SER DIRECTION OF FEED  
s 0ART .UMBER MARKED SIDE IS ALWAYS FACING UPꢀ  
(in mm)  
34  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoꢀing and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case General Use CFULA Series  
r
8.0 0.3  
CFULA series are high selectivity ceramic filters,  
which consist of 4 ceramic elements connected in a  
ladder form.  
MARKING  
EIAJ  
CODE  
They are most suitable for digital communications  
and cellular phones because of their improved GDT  
characteristics.  
0.8 0.ꢀ  
0.6 0.ꢀ  
0.ꢀꢁ 0.0ꢁ  
2.7 0.3  
Features  
c
ꢀ.2 0.ꢁ  
1. High selectivity  
(2) (ꢀ)  
(3)  
Connection  
(ꢀ): Input  
(2): Ground  
(3): Output  
2. A variety of bandwidths available  
3. Excellent GDT characteristics are available within  
pass bandwidth.  
3.3 0.ꢁ  
(in mm)  
4. Easily mounted on a printed circuit board  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
Frequency (fo)  
(kHz)  
6dB  
Bandwidth  
(kHz)  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Part Number  
455  
±2.0ꢀHꢁ  
fn±15.0  
min.  
fn±30.0 max.  
[within 40dB]  
27 min.  
[within fn±100ꢀHꢁ]  
4.0 max.  
[at minimum loss point]  
CFULA455KB2A-B0  
CFULA455KC2A-B0  
CFULA455KD4A-B0  
CFULA455KE4A-B0  
CFULA455KF4A-B0  
CFULA455KG1A-B0  
CFULA455KH1A-B0  
1500  
1500  
1500  
1500  
2000  
2000  
2000  
±
455  
±2.0ꢀHꢁ  
fn±12.5  
min.  
fn±24.0 max.  
[within 40dB]  
27 min.  
[within fn±100ꢀHꢁ]  
4.0 max.  
[at minimum loss point]  
455  
±1.5ꢀHꢁ  
fn±10.0  
min.  
fn±20.0 max.  
[within 40dB]  
27 min.  
[within fn±100ꢀHꢁ]  
4.0 max.  
[at minimum loss point]  
455  
±1.5ꢀHꢁ  
fn±7.5  
min.  
fn±15.0 max.  
[within 40dB]  
27 min.  
[within fn±100ꢀHꢁ]  
6.0 max.  
[at minimum loss point]  
455  
±1.5ꢀHꢁ  
fn±6.0  
min.  
fn±12.5 max.  
[within 40dB]  
27 min.  
[within fn±100ꢀHꢁ]  
6.0 max.  
[at minimum loss point]  
455  
±1.0ꢀHꢁ  
fn±4.5  
min.  
fn±10.0 max.  
[within 40dB]  
25 min.  
[within fn±100ꢀHꢁ]  
6.0 max.  
[at minimum loss point]  
455  
±1.0ꢀHꢁ  
fn±3.0  
min.  
fn±±.0 max.  
[within 40dB]  
35 min.  
[within fn±100ꢀHꢁ]  
6.0 max.  
[at minimum loss point]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455ꢀHꢁ.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocꢀing capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in pacꢀage page in this catalog.  
Test Circuit  
c
(3)  
(ꢀ) (2)  
Rꢀ  
Rg  
Eꢀ  
R2  
E2  
RF Voltmeter  
Connection  
(ꢀ): Input  
S.S.G.  
0dBm  
(2): Ground  
(3): Output  
Rg+Rꢀ=R2=Input/Output Impedance  
35  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFULA455KE4A-B0  
CFULA455KE4A-B0  
0
0
200  
ꢀꢁ0  
ꢀ0  
20  
30  
40  
ꢀ0  
20  
30  
40  
ꢀ00  
ꢁ0  
0
ꢁ0  
60  
ꢁ0  
60  
70  
70  
80  
90  
80  
90  
ꢀ00  
200  
ꢀ00  
300  
400  
ꢁ00  
600  
700  
800  
900  
ꢀ000  
430  
4ꢁꢁ  
480  
Frequency (kHz)  
Frequency (kHz)  
9
36  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case General Use CFWLA Series  
r
11.±±±.5  
Ceramic filter CFWLA series are low profile high  
selectivity ceramic filters, which use 6 elements in  
ladder form.  
MARKING  
EIAJ  
CODE  
They are best suitable to high-class transceivers,  
cordless telephones and amateur radios.  
±.8±±.1  
Features  
1. Low profile, high selectivity  
2. Available bandwidths are B to J as standard  
3. Easily mountable on any PC board  
4. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
c
±.15  
±.6±±.1  
2.9±±.3  
2.6±±.3  
1.2±±.5  
2.9—±±±.3.3  
Connection  
(1): Input  
(2)(3)(4): Ground  
(5): Output  
(4)  
(3)  
(2) (1)  
(5)  
(in mm)  
2.3±±.5  
2.±±±.3  
Nominal Center  
6dB  
Stop  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Ripple  
(dB)  
Part Number  
Frequency (fn) Bandwidth Bandwidth  
(kHz)  
(kHz)  
(kHz)  
fn±15.0  
min.  
fn±30.0 maꢀ.  
35 min.  
4.0 maꢀ.  
3.0 maꢀ.  
CFWLA455KBFA-B0  
CFWLA455KCFA-B0  
CFWLA455KDFA-B0  
CFWLA455KEFA-B0  
CFWLA455KFFA-B0  
CFWLA455KGFA-B0  
CFWLA455KHFA-B0  
CFWLA455KJFA-B0  
455.0  
1500  
1500  
1500  
1500  
2000  
2000  
2000  
2000  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±10kꢁH]  
fn±12.5  
min.  
fn±24.0 maꢀ. 35 min. 4.0 maꢀ. 3.0 maꢀ.  
455.0  
455.0  
455.0  
455.0  
455.0  
455.0  
455.0  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±8kꢁH]  
fn±20.0 maꢀ. 35 min. 4.0 maꢀ. 3.0 maꢀ.  
fn±10.0  
min.  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±±kꢁH]  
fn±±.5  
min.  
fn±15.0 maꢀ. 35 min. 6.0 maꢀ. 3.0 maꢀ.  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±5kꢁH]  
fn±12.5 maꢀ. 35 min. 6.0 maꢀ. 3.0 maꢀ.  
10  
fn±6.0  
min.  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±4kꢁH]  
fn±4.5  
min.  
fn±10.0 maꢀ. 35 min. 6.0 maꢀ. 2.0 maꢀ.  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±3kꢁH]  
fn±9.0 maꢀ. 60 min. 6.0 maꢀ. 2.0 maꢀ.  
fn±3.0  
min.  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±2kꢁH]  
fn±2.0  
min.  
fn±±.5 maꢀ. 60 min. ±.0 maꢀ. 2.0 maꢀ.  
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±1.5kꢁH]  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
(5)  
R1  
(1) (2) (3) (4)  
RF Voltmeter  
Connection  
(1): Input  
R2  
E2  
Rg  
E1  
(5): Output  
S.S.G.  
±dBm  
(2)(3)(4): Ground  
Rg+R1=R2=Input/Output Impedance  
3±  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFWLA455KEFA-B0  
CFWLA455KEFA-B0  
±
4±±  
3±±  
2±±  
1±±  
±
±
1±  
2±  
3±  
4±  
1±  
2±  
3±  
4±  
5±  
6±  
5±  
6±  
7±  
7±  
8±  
9±  
8±  
9±  
1±±  
2±±  
1±±  
43±  
455  
48±  
3±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
Frequency (kHz)  
Frequency (kHz)  
10  
38  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case Miniaturized Type CFULB Series  
r
6.5±±.3  
CFULB series ceramic filters are miniature, high-  
MARKING  
performance ceramic filters composed of piezoelectric  
EIAJ  
CODE  
elements connected in a ladder form.  
These filters, only 6.3mm high, are 65% the  
volume of conventional types.  
±.7±±.1  
±.5±±.1  
They are well suited for miniaturizing various kinds  
of communications equipment, pocket pagers, car  
radios, cordless telephones and mobile telephones.  
±.15±±.±5  
±.8±±.3  
2.4±±.3 1.8±±.3  
±.7±±.3  
Connection  
(1)  
(2)  
(1): Input  
(2): Output  
(3)  
Features  
c
(3) (4)  
: Ground  
}
(4)  
1. Miniature and high selectivity  
(in mm)  
2. A variety of bandwidths are available  
3. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
Frequency (fo)  
(kHz)  
6dB  
Bandwidth  
(kHz)  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Part Number  
455  
±2.0kꢀz  
fn±15.0  
min.  
fn±30.0 maꢁ.  
[within 40dB]  
27 min.  
[within fn±100kꢀz]  
4.0 maꢁ.  
[at minimum loss point]  
CFULB455KB2A-B0  
CFULB455KC2A-B0  
CFULB455KD4A-B0  
CFULB455KE4A-B0  
CFULB455KF4A-B0  
CFULB455KG1A-B0  
CFULB455KH1A-B0  
CFULB455KJ1A-B0  
1500  
1500  
1500  
1500  
2000  
2000  
2000  
2000  
455  
±2.0kꢀz  
fn±12.5  
min.  
fn±24.0 maꢁ.  
[within 40dB]  
27 min.  
[within fn±100kꢀz]  
4.0 maꢁ.  
[at minimum loss point]  
455  
±1.5kꢀz  
fn±10.0  
min.  
fn±20.0 maꢁ.  
[within 40dB]  
27 min.  
[within fn±100kꢀz]  
4.0 maꢁ.  
[at minimum loss point]  
455  
±1.5kꢀz  
fn±7.5  
min.  
fn±15.0 maꢁ.  
[within 40dB]  
27 min.  
[within fn±100kꢀz]  
6.0 maꢁ.  
[at minimum loss point]  
455  
±1.5kꢀz  
fn±6.0  
min.  
fn±12.5 maꢁ.  
[within 40dB]  
27 min.  
[within fn±100kꢀz]  
6.0 maꢁ.  
[at minimum loss point]  
11  
455  
±1.0kꢀz  
fn±4.5  
min.  
fn±10.0 maꢁ.  
[within 40dB]  
25 min.  
[within fn±100kꢀz]  
6.0 maꢁ.  
[at minimum loss point]  
455  
±1.0kꢀz  
fn±3.0  
min.  
fn±±.0 maꢁ.  
[within 40dB]  
35 min.  
[within fn±100kꢀz]  
6.0 maꢁ.  
[at minimum loss point]  
455  
±1.0kꢀz  
fn±2.0  
min.  
fn±7.5 maꢁ.  
[within 40dB]  
35 min.  
[within fn±100kꢀz]  
6.0 maꢁ.  
[at minimum loss point]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kꢀz.  
CFULB455K_series filters are 4-element ceramic filters and miniature versions of CFULA455K_series.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(3)  
(2)  
(4)  
Rg  
RF Voltmeter  
Connection  
E1  
R2  
E2  
S.S.G.  
±dBm  
(1): Input  
(2): Output  
(3)(4): Ground  
Rg+R1=R2=Input/Output Impedance  
3±  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFULB455KE4A-B0  
CFULB455KE4A-B0  
±
±
2±±  
1±  
2±  
3±  
4±  
1±  
2±  
3±  
4±  
15±  
1±±  
5±  
6±  
5±  
6±  
7±  
7±  
5±  
8±  
9±  
8±  
9±  
1±±  
2±±  
1±±  
±
3±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
43±  
455  
48±  
Frequency (kHz)  
Frequency (kHz)  
11  
40  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case Miniaturized Type CFWLB Series  
r
9.5±±.3  
CFWLB series ceramic filters are miniature, high-  
MARKING  
performance ceramic filters composed of piezoelectric  
EIAJ  
CODE  
elements connected in a ladder form.  
These filters, only 6.3mm high, are 67% the volume  
of conventional types.  
±.7±±.1  
±.5±±.1  
They are well suited for miniaturizing various kinds  
±.15±±.±5  
of communications equipment, pocket pagers, pagers,  
2.7±±.3 2.8±±.3  
2.5±±.3  
±.9±±.3  
car radios, cordless telephones and mobile telephones.  
Connection  
(1): Input  
(2): Output  
(3)  
(2)  
(1)  
(4)  
±.7±±.3  
(3)  
(5)  
(4) : Ground  
(5)  
Features  
1. Miniature and high selectivity  
c
}
(in mm)  
2. A variety of bandwidths are available.  
3. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Nominal Center  
Frequency (fn)  
(kHz)  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
Part Number  
CFWLB455KBFA-B0  
CFWLB455KCFA-B0  
CFWLB455KDFA-B0  
CFWLB455KEFA-B0  
CFWLB455KEFA004-B0  
CFWLB455KFFA-B0  
CFWLB455KGFA-B0  
CFWLB455KHFA-B0  
CFWLB455KJFA-B0  
Bandwidth  
(kHz)  
fn±15.0  
min.  
fn±30.0 maꢀ.  
[within 50dB]  
35 min.  
[within fn±100kꢁz]  
4.0 maꢀ.  
[at minimum loss point]  
455.0  
455.0  
455.0  
455.0  
455.0  
455.0  
455.0  
455.0  
455.0  
1500  
1500  
1500  
1500  
1500  
2000  
2000  
2000  
2000  
fn±12.5  
min.  
fn±24.0 maꢀ.  
[within 50dB]  
35 min.  
[within fn±100kꢁz]  
4.0 maꢀ.  
[at minimum loss point]  
fn±10.0  
min.  
fn±20.0 maꢀ.  
[within 50dB]  
35 min.  
[within fn±100kꢁz]  
4.0 maꢀ.  
[at minimum loss point]  
fn±7.5  
min.  
fn±15.0 maꢀ.  
[within 50dB]  
35 min.  
[within fn±100kꢁz]  
6.0 maꢀ.  
[at minimum loss point]  
fn±7.5  
min.  
fn±15.0 maꢀ.  
[within 60dB] [within fn±15kꢁz to 30kꢁz]  
60 min.  
5.0 maꢀ.  
[at fn]  
fn±6.0  
min.  
fn±12.5 maꢀ.  
[within 50dB]  
35 min.  
[within fn±100kꢁz]  
6.0 maꢀ.  
[at minimum loss point]  
12  
fn±4.5  
min.  
fn±10.0 maꢀ.  
[within 50dB]  
35 min.  
[within fn±100kꢁz]  
6.0 maꢀ.  
[at minimum loss point]  
fn±3.0  
min.  
fn±±.0 maꢀ.  
[within 50dB]  
55 min.  
[within fn±100kꢁz]  
6.0 maꢀ.  
[at minimum loss point]  
fn±2.0  
min.  
fn±7.0 maꢀ.  
[within 50dB]  
55 min.  
[within fn±100kꢁz]  
7.0 maꢀ.  
[at minimum loss point]  
CFWLB455K_series filters are 4-element ceramic filters and miniature versions of CFWLA455K_series.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
41  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Test Circuit  
c
R1  
(1)  
(2)  
(3) (4) (5)  
Rg  
RF Voltmeter  
Connection  
E1  
R2  
E2  
S.S.G.  
±dBm  
(1): Input  
(2): Output  
(3)(4)(5): Ground  
Rg+R1=R2=Input/Output Impedance  
Frequency Characteristics  
c
CFWLB455KEFA-B0  
CFWLB455KEFA-B0  
±
±
2±±  
15±  
1±  
2±  
3±  
4±  
1±  
2±  
3±  
4±  
1±±  
5±  
±
5±  
6±  
5±  
6±  
7±  
7±  
8±  
9±  
8±  
9±  
1±±  
2±±  
1±±  
43±  
455  
48±  
3±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
Frequency (kHz)  
Frequency (kHz)  
12  
42  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case Group Delay Flat Type CFULA_Y Series  
r
8.0 0.3  
CFULA_Y series are high selectivity ceramic filters,  
MARKING  
which consist of 4 ceramic elements connected in a  
EIAJ  
CODE  
ladder form.  
They are most suitable for digital communications  
and cellular phones because of their improved GDT  
0.8 0.ꢀ  
characteristics.  
0.ꢀꢁ 0.0ꢁ  
2.7 0.3  
Features  
c
0.6 0.ꢀ  
ꢀ.2 0.ꢁ  
1. High selectivity  
(2) (ꢀ)  
(3)  
Connection  
(ꢀ): Input  
(2): Ground  
(3): Output  
2. A variety of bandwidths are available.  
3. Excellent GDT characteristics are available within  
pass bandwidth.  
3.3 0.ꢁ  
(in mm)  
4. Easily mounted on a printed circuit board  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
GDT Deviation  
(µs)  
Part Number  
Frequency (fo) Bandwidth  
(dB)  
(kHz)  
(kHz)  
455  
1.5kHꢀ  
fn 15.0  
min.  
fn 35.0 max.  
25 min.  
5.0 max.  
15.0 max.  
CFULA455KB4Y-B0  
CFULA455KC4Y-B0  
CFULA455KD1Y-B0  
CFULA455KE1Y-B0  
CFULA455KF1Y-B0  
CFULA455KG1Y-B0  
1500  
1500  
1500  
1500  
2000  
2000  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 10kHꢀ]  
455  
1.5kHꢀ  
fn 12.5  
min.  
fn 30.0 max. 25 min. 6.0 max. 15.0 max.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 8kHꢀ]  
fn 25.0 max. 23 min. 7.0 max. 20.0 max.  
455  
1.0kHꢀ  
fn 10.0  
min.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 7kHꢀ]  
455  
1.0kHꢀ  
fn 7.5  
min.  
fn 20.0 max. 23 min. 8.0 max. 20.0 max.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 5kHꢀ]  
fn 17.5 max. 23 min. 9.0 max. 20.0 max.  
455  
1.0kHꢀ  
fn 6.0  
min.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 4kHꢀ]  
455  
1.0kHꢀ  
fn 4.5  
min.  
fn 15.0 max. 23 min. 10.0 max. 20.0 max.  
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 3kHꢀ]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kHꢀ.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
13  
Test Circuit  
c
(3)  
(ꢀ) (2)  
Rꢀ  
Rg  
Eꢀ  
R2  
E2  
RF Voltmeter  
Connection  
(ꢀ): Input  
S.S.G.  
0dBm  
(2): Ground  
(3): Output  
Rg+Rꢀ=R2=Input/Output Impedance  
43  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFULA455KE1Y-B0  
CFULA455KE1Y-B0  
0
ꢀ0  
20  
30  
40  
ꢁ0  
60  
70  
80  
90  
ꢀ00  
0
ꢀ0  
20  
30  
40  
ꢁ0  
60  
70  
80  
200  
ꢀꢁ0  
ꢀ00  
ꢁ0  
90  
ꢀ00  
200  
0
300  
400  
ꢁ00  
600  
700  
800  
900  
ꢀ000  
430  
4ꢁꢁ  
480  
Frequency (kHz)  
Frequency (kHz)  
13  
44  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case Group Delay Flat Type CFWLA_Y Series  
r
11.±±±.5  
CFWLA_Y series are high selectivity ceramic filters,  
MARKING  
which consist of 6 ceramic elements connected in a  
EIAJ  
CODE  
ladder form.  
They are most suitable for digital communications  
and mobile telephones because of their improved  
GDT characteristics.  
±.8±±.1  
±.15  
±.6±±.1  
Features  
1. High selectivity  
2. A variety of bandwidths are available  
3. Excellent GDT characteristics are available within  
pass bandwidth.  
2.9±±.3  
c
2.6±±.3  
1.2±±.5  
2.9—±±±.3.3  
Connection  
(1): Input  
(2)(3)(4): Ground  
(5): Output  
(4)  
(3)  
(2) (1)  
(5)  
(in mm)  
2.3±±.5  
2.±±±.3  
4. Easily mounted on a printed circuit board  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
Center  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
GDT Deviation  
(µs)  
Part Number  
Frequency (fo) Bandwidth  
(kHz)  
(kHz)  
455  
1.5kHꢀ  
fn 15.0  
min.  
fn 30.0 max.  
40 min.  
6.0 max.  
30.0 max.  
CFWLA455KB4Y-B0  
CFWLA455KC4Y-B0  
CFWLA455KD1Y-B0  
CFWLA455KE1Y-B0  
CFWLA455KF1Y-B0  
CFWLA455KG1Y-B0  
1500  
1500  
1500  
1500  
2000  
2000  
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 10kHꢀ]  
455  
1.5kHꢀ  
fn 12.5  
min.  
fn 2ꢁ.5 max. 40 min. ꢁ.0 max. 30.0 max.  
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 8kHꢀ]  
fn 25.0 max. 40 min. 8.0 max. 30.0 max.  
455  
1.0kHꢀ  
fn 10.0  
min.  
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn ꢁkHꢀ]  
455  
1.0kHꢀ  
fn ꢁ.5  
min.  
fn 20.0 max. 40 min. 9.0 max. 30.0 max.  
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 5kHꢀ]  
fn 1ꢁ.5 max. 40 min. 10.0 max. 40.0 max.  
455  
1.0kHꢀ  
fn 6.0  
min.  
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 4kHꢀ]  
455  
1.0kHꢀ  
fn 4.5  
min.  
fn 15.0 max. 40 min. 11.0 max. 40.0 max.  
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 3kHꢀ]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kHꢀ.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
14  
Test Circuit  
c
(5)  
R1  
(1) (2) (3) (4)  
RF Voltmeter  
Connection  
(1): Input  
R2  
E2  
Rg  
E1  
(5): Output  
S.S.G.  
±dBm  
(2)(3)(4): Ground  
Rg+R1=R2=Input/Output Impedance  
45  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFWLA455KE1Y-B0  
CFWLA455KE1Y-B0  
±
1±  
2±  
3±  
4±  
5±  
6±  
7±  
8±  
9±  
1±±  
±
1±  
2±  
3±  
4±  
5±  
6±  
7±  
8±  
4±±  
3±±  
2±±  
1±±  
±
9±  
1±±  
2±±  
3±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
43±  
455  
48±  
Frequency (kHz)  
Frequency (kHz)  
14  
46  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series  
r
6.5±±.3  
Ceramic filter CFULB_Y series are miniature and high-  
MARKING  
performance filters. These filters, only 6.3mm  
EIAJ  
CODE  
high, are 65% the volume of conventional types.  
Well suited for miniaturizing communications  
equipment, especially for a cellular phone.  
±.7±±.1  
±.5±±.1  
±.15±±.±5  
Features  
1. Miniature, flat GDT characteristics  
2. Suitable for a cellular phone  
3. A variety of bandwidths are available.  
4. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
c
±.8±±.3  
2.4±±.3 1.8±±.3  
±.7±±.3  
Connection  
(1)  
(2)  
(1): Input  
(2): Output  
(3)  
(3) (4)  
: Ground  
}
(4)  
(in mm)  
Center  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
GDT Deviation  
(µs)  
Part Number  
Frequency (fo) Bandwidth  
(kHz)  
(kHz)  
455  
1.5kꢀz  
fn 15.0  
min.  
fn 35.0 maꢁ.  
25 min.  
5.0 maꢁ.  
15.0 maꢁ.  
CFULB455KB4Y-B0  
CFULB455KC4Y-B0  
CFULB455KD1Y-B0  
CFULB455KE1Y-B0  
CFULB455KF1Y-B0  
CFULB455KG1Y-B0  
1500  
1500  
1500  
1500  
2000  
2000  
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 10kꢀz]  
455  
1.5kꢀz  
fn 12.5  
min.  
fn 30.0 maꢁ. 25 min. 6.0 maꢁ. 15.0 maꢁ.  
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 8kꢀz]  
fn 25.0 maꢁ. 23 min. 7.0 maꢁ. 20.0 maꢁ.  
455  
1.0kꢀz  
fn 10.0  
min.  
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 7kꢀz]  
455  
1.0kꢀz  
fn 7.5  
min.  
fn 20.0 maꢁ. 23 min. 8.0 maꢁ. 20.0 maꢁ.  
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 5kꢀz]  
fn 17.5 maꢁ. 23 min. 9.0 maꢁ. 20.0 maꢁ.  
455  
1.0kꢀz  
fn 6.0  
min.  
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 4kꢀz]  
455  
1.0kꢀz  
fn 4.5  
min.  
fn 15.0 maꢁ. 23 min. 10.0 maꢁ. 20.0 maꢁ.  
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 3kꢀz]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kꢀz.  
CFULB455K_Y series filters are 4-element ceramic filters and miniature versions of CFULA455K_Y series.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(3)  
(2)  
(4)  
15  
Rg  
RF Voltmeter  
Connection  
E1  
R2  
E2  
S.S.G.  
±dBm  
(1): Input  
(2): Output  
(3)(4): Ground  
Rg+R1=R2=Input/Output Impedance  
47  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFULB455KE1Y-B0  
CFULB455KE1Y-B0  
±
1±  
2±  
3±  
4±  
5±  
6±  
7±  
8±  
9±  
1±±  
±
1±  
2±  
3±  
4±  
5±  
6±  
7±  
8±  
2±±  
15±  
1±±  
5±  
9±  
1±±  
2±±  
±
3±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
43±  
455  
48±  
Frequency (kHz)  
Frequency (kHz)  
15  
48  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Filters (CERAFILr) for Communications Equipment  
CERAFIL Plastic Case Group Delay Flat Type CFWLB_Y Series  
r
9.5±±.3  
Ceramic filter CFWLB_Y series are miniature and  
MARKING  
high-performance filters. These filters, only  
EIAJ  
CODE  
6.3mm high, are 67% the volume of conventional types.  
Well suited for miniaturizing communications  
equipment, especially for a cellular phone.  
±.7±±.1  
±.15±±.±5  
2.5±±.3  
Features  
1. Miniature, flat GDT characteristics  
2. Suitable for a cellular phone  
3. A variety of bandwidths are available.  
4. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
c
±.5±±.1  
Connection  
2.7±±.3 2.8±±.3  
±.9±±.3  
(1): Input  
(2): Output  
(3)  
(2)  
(1)  
(3)  
(4)  
(5)  
(4) : Ground  
}
(5)  
±.7±±.3  
(in mm)  
Center  
6dB  
Stop  
Bandwidth  
(kHz)  
Stop Band  
Attenuation  
(dB)  
Input/Output  
Impedance  
(ohm)  
Insertion Loss  
(dB)  
GDT Deviation  
(µs)  
Part Number  
Frequency (fo) Bandwidth  
(kHz)  
(kHz)  
455  
1.5kꢀz  
fn 15.0  
min.  
fn 30.0 maꢁ.  
40 min.  
6.0 maꢁ.  
30.0 maꢁ.  
CFWLB455KB4Y-B0  
CFWLB455KC4Y-B0  
CFWLB455KD1Y-B0  
CFWLB455KE1Y-B0  
CFWLB455KF1Y-B0  
CFWLB455KG1Y-B0  
1500  
1500  
1500  
1500  
2000  
2000  
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 10kꢀz]  
455  
1.5kꢀz  
fn 12.5  
min.  
fn 27.5 maꢁ. 40 min. 7.0 maꢁ. 30.0 maꢁ.  
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 8kꢀz]  
fn 25.0 maꢁ. 40 min. 8.0 maꢁ. 30.0 maꢁ.  
455  
1.0kꢀz  
fn 10.0  
min.  
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 7kꢀz]  
455  
1.0kꢀz  
fn 7.5  
min.  
fn 20.0 maꢁ. 40 min. 9.0 maꢁ. 30.0 maꢁ.  
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 5kꢀz]  
fn 17.5 maꢁ. 35 min. 10.0 maꢁ. 40.0 maꢁ.  
455  
1.0kꢀz  
fn 6.0  
min.  
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 4kꢀz]  
455  
1.0kꢀz  
fn 4.5  
min.  
fn 15.0 maꢁ. 40 min. 11.0 maꢁ. 40.0 maꢁ.  
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 3kꢀz]  
Center frequency (fo) defined by the center of 6dB bandwidth.  
(fn) means nominal center frequency 455kꢀz.  
CFWLB455K_Y series filters are 4-element ceramic filters and miniature versions of CFWLA455K_Y series.  
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
Test Circuit  
c
R1  
(1)  
(2)  
(3) (4) (5)  
Rg  
RF Voltmeter  
Connection  
E1  
R2  
E2  
S.S.G.  
±dBm  
16  
(1): Input  
(2): Output  
(3)(4)(5): Ground  
Rg+R1=R2=Input/Output Impedance  
49  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Frequency Characteristics  
c
CFWLB455KE1Y-B0  
CFWLB455KE1Y-B0  
±
1±  
2±  
3±  
4±  
5±  
6±  
7±  
8±  
9±  
1±±  
2±±  
15±  
1±±  
5±  
±
1±  
2±  
3±  
4±  
5±  
6±  
7±  
8±  
9±  
1±±  
2±±  
±
43±  
455  
48±  
3±±  
4±±  
5±±  
6±±  
7±±  
8±±  
9±±  
1±±±  
Frequency (kHz)  
Frequency (kHz)  
16  
50  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Plastic Case Type CERAFIL Minimum Quantity/Notice  
r
Minimum Quantity  
c
Part Number  
Bulk  
200  
250  
150  
150  
CFULA Series  
CFULB Series  
CFWLA Series  
CFWLB Series  
(pcs.)  
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.  
Notice  
c
o Soldering and Mounting  
The component cannot withstand washing.  
o Storage and Operating Conditions  
1. Product Storage Condition  
(2) Please do not put the products directly on the floor  
Please store the products in a room where the  
temperature/humidity is stable, and avoid places where  
there are large temperature changes. Please store the  
products under the following conditions:  
Temperature: -10 to +40°C  
without anything under them to avoid damp places  
and/or dusty places.  
(3) Please do not store the products in places such as a  
damp heated place or any place exposed to direct  
sunlight or excessive vibration.  
Humidity: 15 to 85% R.H.  
(4) Please use the products immediately after the  
package is opened, because the characteristics may  
be reduced in quality and/or be degraded in  
solderability due to storage under poor condition.  
(5) Please do not drop the products to avoid cracking of  
ceramic element.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six months  
after delivery under the conditions of a sealed and  
unopened package. Please use the products within six  
months after delivery. If you store the products for a long  
time (more than six months), use carefully because  
solderability may be degraded due to storage under poor  
conditions.  
4. Other  
Please be sure to consult with our sales representative or  
engineer whenever the products are to be used in  
conditions not listed above.  
Please confirm solderability and characteristics for the  
products regularly.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Sulfides and so on), because the characteristics may  
be reduced in quality and may be degraded in  
solderability due to storage in a chemical atmosphere.  
o Rating  
The component may be damaged if excessive mechanical  
stress is applied.  
o Handling  
1. Do not use this product with bend. The component may  
be damaged if excessive mechanical stress is applied to  
it mounted on the printed circuit board.  
2. All kinds of reflow soldering must not be applied on the  
component.  
5. Conformal coating of the component is not acceptable  
due to non-sealed construction.  
6. Accurate test circuit values are required to measure  
electrical characteristics. Miscorrelation may be caused if  
there is any deviation, especially stray capacitance, from  
the test circuit in the specification.  
3. Do not clean or wash the component as it is not  
hermetically sealed.  
7. For safety purposes, connect the output of filters to the IF  
amplifier through a D.C. blocking capacitor. Avoid  
applying a direct current to the output of ceramic filters.  
4. Do not use strong acidity flux, more than 0.2wt% chlorine  
content, in flow soldering.  
51  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators for Communications Equipment  
kHz Type Ceramic Discriminators  
6.±±±.ꢁ  
Ceramic discriminator consists of a wide band  
piezoelectric resonator.  
MARKING  
It is ideal for mobile communications equipment due to  
its small size and light weight.  
EIAJ  
CODE  
1.±±±.1  
Standard line includes products for a wide range of  
applications, from cordless telecom to cellular  
telephone. Practically adjustment free at the detection  
circuit, small size is suitable for downsizing.  
ꢀ.7±±.ꢁ  
1.15±±.ꢁ  
CDBKB Series  
Features  
c
1. Small in size and light weight  
(in mm)  
2. Adjustment free at detection circuit  
3. High sensitivity and stability  
6.±±±.ꢁ  
4. Wide range of standard products are available for  
various ICs.  
ꢀ.±±±.ꢀ  
5. Operating temperature range: -20 to +80 (°C)  
Storage temperature range: -40 to +85 (°C)  
MARKING  
EIAJ  
CODE  
±.5±±.1  
±.15±±.±5  
CDBLB_CAX Series  
4.ꢁ±±.ꢁ  
(in mm)  
±.9±±.ꢁ  
6.±±±.ꢁ  
ꢀ.±±±.ꢀ  
MARKING  
EIAJ  
CODE  
±.5±±.1  
±.15±±.±5  
CDBLB_CAY Series  
4.ꢁ±±.ꢁ  
(in mm)  
±.9±±.ꢁ  
Specified by Impedance Characteristics (Type 1)  
Nominal Center  
Inclination of  
Impedance Curve (1)  
Inclination of  
Impedance Curve (2)  
Capacitance  
Part Number  
Frequency (fn)  
(kHz)  
IC  
IC Maker  
TOSHIBA  
TOSHIBA  
Type  
Lead  
Lead  
(C)  
447.0 1.5kHz  
(at |Z|=2.05kohm)  
463.0 1.5kHz  
(at |Z|=10.0kohm)  
CDBLB455KCAX02-B0  
CDBLB455KCAX31-B0  
455  
455  
140pF 20ꢀ  
TA8104F  
TA31141  
17  
447.0 1.5kHz  
(at |Z|=2.05kohm)  
463.0 1.5kHz  
(at |Z|=10.0kohm)  
140pF 20ꢀ  
For safety purposes, avoid applying a direct current between the terminals.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.  
52  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smo5ing and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,20±±  
!Note  
P0ꢀE.pdf  
Impedance Curve  
c
CDBLB455KCAX02-B0  
CDBLB455KCAX31-B0  
5±±K  
5±±K  
18±  
9±  
18±  
9±  
1±±K  
5±K  
1±±K  
5±K  
1±K  
5K  
1±K  
5K  
±
±
1K  
1K  
–9±  
–9±  
5±±  
5±±  
1±±  
5±  
1±±  
5±  
–18±  
–18±  
4±±  
4ꢁ±  
44±  
46±  
48±  
5±±  
4±±  
4ꢁ±  
44±  
46±  
48±  
5±±  
Frequency (kHz)  
Frequency (kHz)  
Specified by Impedance Characteristics (Type 2)  
Nominal Center  
Frequency (fn)  
Anti-resonant  
Frequency (Fa)  
Delta F  
(Fa-Fr)  
Resonant  
Resistance (R)  
Capacitance  
(C)  
Part Number  
IC  
IC Maker  
Type  
CDBKB455KCAX33-R0  
CDBLB455KCAY03-B0  
CDBLB455KCAX15-B0  
CDBLB455KCAX25-B0  
CDBLB455KCAX33-B0  
-
-
-
-
-
462.0±±.ꢀ5kH  
4ꢀꢀ.0±±.ꢀ5kH  
463.ꢀ±±.05kH  
46ꢀ.0±±.ꢀ5kH  
46ꢀ.0±±.ꢀ5kH  
40±4.05kH  
46±ꢀ.05kH  
43±2.05kH  
4ꢀ±4.05kH  
4ꢀ±4.05kH  
200ohm max.  
70ohm max.  
300ohm max.  
300ohm max.  
300ohm max.  
±ꢀ0pF±20ꢁ  
ꢀꢀ0pF±20ꢁ  
±40pF±20ꢁ  
±3ꢀpF±20ꢁ  
±3ꢀpF±20ꢁ  
CXA±474  
CXA±±84M  
CXA±±83M  
CXA±484  
CXA±474  
SONY  
SONY  
SONY  
SONY  
SONY  
SMD  
Lead  
Lead  
Lead  
Lead  
For safety purposes, avoid applying a direct current between the terminals.  
The order quantity should be an integral multiple of the "Minimum Quantity" shown in pac5age page in this catalog.  
Impedance Curve  
c
CDBKB455KCAX33-R0  
CDBLB455KCAY03-B0  
500K  
180  
90  
0
100K  
50K  
180  
90  
100K  
50K  
10K  
5K  
10K  
5K  
1K  
0
500  
1K  
–90  
500  
–90  
100  
50  
100  
50  
–180  
480  
–180  
500  
10  
380  
400  
420  
440  
460  
400  
420  
440  
460  
480  
Frequency (kHz)  
Frequency (kHz)  
±7  
Continued on the following page.  
ꢀ3  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Impedance Curve  
c
CDBLB455KCAX15-B0  
CDBLB455KCAX25-B0  
500K  
500K  
180  
90  
0
180  
90  
100K  
50K  
100K  
50K  
10K  
5K  
10K  
5K  
0
1K  
1K  
–90  
500  
500  
–90  
100  
50  
100  
50  
–180  
–180  
500  
390  
410  
430  
450  
470  
490  
400  
420  
440  
460  
480  
Frequency (kHz)  
Frequency (kHz)  
CDBLB455KCAX33-B0  
500K  
180  
90  
0
100K  
50K  
10K  
5K  
1K  
500  
–90  
100  
50  
–180  
500  
400  
420  
440  
460  
480  
Frequency (kHz)  
17  
54  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Specified by Recovered Audio Characteristics  
Nominal Center Recovered  
Recovered Distortion  
Distortion  
(%)  
Part Number  
Frequency (fn) Audio 3dB BW Audio Output  
(at fn)  
(%)  
IC  
TB±2±02FG  
MC±±57  
IC Maker  
Type  
(kHz)  
(kHz)  
(mV)  
CDBKB450KCAY79-R0  
CDBKB455KCAY07-R0  
CDBKB455KCAY09-R0  
CDBKB455KCAY13-R0  
CDBKB455KCAY16-R0  
CDBKB455KCAY24-R0  
CDBKB455KCAY27-R0  
CDBKB455KCAY28-R0  
CDBKB455KCAY29-R0  
CDBKB455KCAY35-R0  
CDBKB455KCAY40-R0  
CDBKB455KCAY49-R0  
CDBKB455KCAY50-R0  
CDBKB455KCAY66-R0  
CDBKB455KCLX36-R0  
CDBKB455KCLX39-R0  
CDBKB455KCLY13-R0  
CDBLB455KCAY07-B0  
CDBLB455KCAY13A-B0  
CDBLB455KCAY24-B0  
CDBLB455KCAY28-B0  
CDBLB455KCAY34-B0  
CDBLB455KCAY40-B0  
CDBLB455KCAY42-B0  
CDBLB455KCAY49-B0  
CDBLB455KCAY50-B0  
CDBLB455KCLY09-B0  
450  
fn±±.0 min.  
145 ±40  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TOSHIBA  
SMD  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
455  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.2 min.  
fn±1±.0 min.  
fn±11.0 min.  
fn±1±.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±4.0 min.  
fn±15.0 min.  
±50 ±ꢀ0  
120 ±40  
±±0 ±50  
175 ±40  
100 ±40  
90 ±±0  
40 ±20  
100 ±±0  
100 ±40  
40 ±20  
45 ±10  
ꢀ4 ±ꢀ.4  
40 ±10  
90 ±±0  
1±0 ±20  
120 ±±0  
±40 ±ꢀ0  
±50 ±50  
100 ±40  
40 ±20  
ꢀ5 ±20  
40 ±20  
40 ±15  
45 ±10  
ꢀ4 ±ꢀ.4  
70 ±20  
±.0 max.  
1.5 max.  
4.0 max.  
2.0 max.  
2.0 max.  
2.0 max.  
±.0 max.  
2.5 max.  
2.5 max.  
±.5 max.  
±.0 max.  
4.0 max.  
4.0 max.  
2.5 max.  
2.5 max.  
1.5 max.  
±.0 max.  
±.0 max.  
2.0 max.  
±.0 max.  
2.5 max.  
±.0 max.  
±.0 max.  
±.0 max.  
4.0 max.  
1.5 max.  
MOTOROLA SMD  
NEꢀ04N  
PHILIPS  
SONY  
SMD  
SMD  
CXA100±BM  
MC±±72  
MOTOROLA SMD  
TA±11±ꢀ  
TOSHIBA  
TOKO  
SMD  
SMD  
SMD  
SMD  
SMD  
SMD  
TK10487  
TA±1142F  
NEꢀ05  
TOSHIBA  
PHILIPS  
TOKO  
TK109±0  
TA±1145  
TOSHIBA  
MC±±ꢀ1  
MOTOROLA SMD  
CXA±117N  
NJM2590  
SONY  
JRC  
SMD  
SMD  
SMD  
SMD  
SMD  
5.0 max.  
[within fn ±ꢀkHꢁz  
NE(SA)ꢀ0ꢀ/NE(SA)ꢀ1ꢀ  
NEꢀ07/NEꢀ17  
CXA100±BM  
MC±±57  
PHILIPS  
PHILIPS  
SONY  
7.0 max.  
[within fn ±8kHꢁz  
5.0 max.  
[within fn ±8kHꢁz  
-
-
-
-
-
-
-
-
-
MOTOROLA Lead  
CXA100±BM  
TA±11±ꢀ  
SONY  
Lead  
Lead  
Lead  
TOSHIBA  
TOSHIBA  
TA±1142FN  
MC1±1±ꢀ  
MOTOROLA Lead  
TA±1145  
TOSHIBA  
TOKO  
Lead  
Lead  
TK14590/TK14591  
MC±±ꢀ1  
17  
MOTOROLA Lead  
CXA±117N  
NEꢀ04N  
SONY  
Lead  
Lead  
±.5 max.  
[within fn ±8kHꢁz  
PHILIPS  
Continued on the following page.  
55  
•0Please0read0ratmng0and0!CAUTION0(for0storage,0operatmng,0ratmng,0soldermng,0 ountmng0and0handlmng)0mn0thms0catalog0to0prevent0s o8mng0and/or0burnmng,0etcꢀ  
•0Thms0catalog0has0only0typmcal0specmfi0catmons0because0there0ms0no0space0for0detamled0specmfi0catmonsꢀ0Therefore,0please0revmew0our0product0specmfi0catmons0or0consult0the0approval0sheet0for0product0specmfi0catmons0before0ordermngꢀ Novꢀ24,2.±±  
!Note  
P.5Eꢀpdf  
Continued from the preceding page.  
Nominal Center Recovered  
Recovered Distortion  
Distortion  
(%)  
Part Number  
Frequency (fn) Audio 3dB BW Audio Output  
(at fn)  
(%)  
IC  
IC Maker  
Type  
(kHz)  
(kHz)  
(mV)  
5ꢀ.0 axꢀ  
[wmthmn0fn0±ꢂ8kHz  
CDBLB455KCLY13-B0  
CDBLB455KCAX16-B0  
CDBLB455KCAX18-B0  
CDBLB455KCAX36-B0  
455  
fn±±5ꢀ.0 mnꢀ  
±±.0±ꢁ.  
±ꢀ50 axꢀ  
2ꢀ.0 axꢀ  
2ꢀ.0 axꢀ  
ꢁꢀ50 axꢀ  
CXA±..ꢁBM  
MCꢁꢁ72  
SONY  
Lead  
455  
455  
455  
fn±4ꢀ.0 mnꢀ  
fn±ꢁꢀ.0 mnꢀ  
fn±ꢁꢀ50 mnꢀ  
±ꢂ50±4.  
±ꢂ.0±4.  
±..0±25  
-
-
-
MOTOROLA Lead  
MOTOROLA Lead  
MCꢁꢁ7±  
NE6.6/NE6±6  
PkILIPS  
Lead  
For0safety0purposes,0avomd0applymng0a0dmrect0current0between0the0ter mnalsꢀ  
The0order0quantmty0should0be0an0mntegral0 ultmple0of0the0"Mmnm u 0Quantmty"0shown0mn0pac8age0page0mn0thms0catalogꢀ  
Test Circuit  
c
MC3357  
NE604N  
IF input  
8.2k AF output  
0.01μ  
10k  
16 15 14 13 12 11 10  
MC3357  
0.1μ  
9
8
0.1μ  
16  
1
15  
2
14  
3
13  
12  
11  
6
10  
9
8
1
2
3
4
5
6
7
NE604  
C
0.1μ  
50  
0.1μ  
0.022μ  
C
X
4
5
7
47k  
Vcc  
R
FM S. S. G.  
(Rg = 50Ω)  
X
+
10μ  
Vcc  
Unit C: F  
100p  
1000p  
R
R: Ω  
L
+
47μ  
0.01μ  
Part Number (X)  
C
R
Part Number (X)  
CDBKB455KCAY09-R0 120pF 1.8kΩ  
CDBLB455KCLY09-B0 120pF 560Ω 220μH  
C
R
L
–
CDBLB455KCAY07-B0  
CDBKB455KCAY07-R0  
150pF  
150pF  
1.5kΩ  
1.3kΩ  
AF output  
Unit C: F  
R: Ω  
CXA1003BM  
MC3372  
IF input  
L
0.01μ  
0.1μ  
51  
510k  
8.2k  
0.01μ  
X
R
0.01μ  
51k  
AF output  
0.01μ  
23  
0.01μ  
21  
0.01μ  
19  
0.01μ  
0.01μ  
C
16  
15  
14  
13  
12  
11  
10  
9
8
24  
1
22  
3
20  
5
18  
17  
16  
15  
14  
13  
12  
MC3372  
CXA1003BM  
1
2
3
4
5
6
7
2
4
6
7
8
9
10  
11  
0.1μ 51k  
C
Vcc  
0.01μ  
68p  
Unit C: F  
1.8k  
0.1μ  
220p  
51k  
X
R
0.01μ  
R: Ω  
100μ 100μ  
Vcc  
0.01μ  
(Rg = 50Ω)  
FM S. S. G  
AF output  
Part Number (X)  
C
R
L
–
–
Part Number (X)  
CDBLB455KCAX16-B0  
C
R
CDBLB455KCAY13A-B0 82pF 1.2kΩ  
CDBKB455KCAY13-R0 82pF 1.0kΩ  
CDBLB455KCLY13-B0  
27pF  
4.3kΩ  
1.0kΩ  
Unit C: F  
CDBKB455KCAY16-R0 100pF  
82pF 560Ω 220μH  
CDBKB455KCLY13-R0  
R: Ω  
MC3371  
TA31136  
RF input  
+
10μ  
X
C
R
+
0.1μ  
1μ  
AF output  
0.01μ  
51  
510k  
8.2k  
51k  
0.01μ  
16  
AF output  
0.01μ  
16 15 14 13 12 11 10  
TA31136F  
9
15  
2
14  
3
13  
12  
11  
10  
7
9
Vcc  
(+2.0V)  
MC3371  
1
2
3
4
5
6
7
8
Test condition  
Vcc = +4.0V  
R = 6.2kΩ  
1
4
5
6
8
+
10μ  
X: CDBLB455KCAX18-B0  
Unit C: F  
Vcc  
68p  
R: Ω  
220p  
X
R
±7  
0.1μ  
IF input  
Part Number (X)  
C
R
0.01μ  
CDBLB455KCAY24-B0 91pF 1.5kΩ  
CDBKB455KCAY24-R0 91pF 1.2kΩ  
IF input  
Unit C: F  
R: Ω  
Continued on the following page.  
56  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Test Circuit  
c
TK10487  
TA31142  
Vcc  
2SC1048  
2.2μ  
8.2k  
+
430  
560p  
68k 68k  
3300p  
20 19 18 17 16 15 14 13 12 11  
TK10487  
0.01μ  
20 19 18 17 16 15 14 13 12 11  
TA31142F  
68k  
1
2
3
4
5
6
7
8
9
10  
AF  
output  
Vcc  
1
2
3
4
5
6
7
8
9
10  
C
+
+
10μ  
0.01μ  
X
R
0.1μ  
Unit C: F  
0.01μ  
C
X
Vcc  
R: Ω  
R
Unit C: F  
2k  
0.01μ  
Vcc  
R: Ω  
+
10μ  
+
Part Number (X)  
C
R
10μ  
Part Number (X)  
C
R
IF input  
CDBKB455KCAY27-R0 33pF  
1.0kΩ  
CDBLB455KCAY28-B0  
22pF  
3.3kΩ  
2.7kΩ  
CDBKB455KCAY28-R0 22pF  
NE605  
MC13136  
IF input  
0.01μ  
AF input  
0.1μ  
0.1μ  
X
R
0.15μ  
C
1k  
20 19 18 17 16 15 14 13 12 11  
24 23 22 21 20 19 18 17 16 15 14 13  
MC13136  
NE605  
C
Vcc  
1
2
3
4
5
6
7
8
9
10  
1
2
3
4
5
6
7
8
9
10 11 12  
0.1μ  
Vcc  
22k  
X
+
0.1μ  
R
22μ  
0.1μ  
+
0.1μ  
0.01μ  
0.1μ  
Part Number (X)  
CDBKB455KCAY29-R0  
C
R
IF input  
Unit C: F  
R: Ω  
Part Number (X)  
CDBLB455KCAY34-B0  
C
R
AF output  
56pF  
2.2kΩ  
Unit C: F  
100pF  
1.2kΩ  
R: Ω  
TK10930  
NE(SA)606/616  
IF input  
0.01μ  
0.1μ  
0.1μ  
24 23 22 21 20 19 18 17 16 15 14 13  
TK10930  
AF  
output  
20 19 18 17 16 15 14 13 12 11  
NE606 or NE616  
1
2
3
4
5
6
7
8
9
10 11 12  
C
X
C
Vcc  
8.2k  
0.01μ  
R2  
Vcc  
1
2
3
4
5
6
7
8
9
10  
R1  
+
20k  
10μ  
+
0.1μ  
0.1μ  
X
L
+
8.2k  
0.1μ  
2.2μ  
0.1μ  
R
Unit C: F  
2.2μ  
IF input  
R: Ω  
2k  
0.1μ  
Part Number (X)  
CDBKB455KCAY35-R0  
C
R1  
R2  
Part Number (X)  
C
R
L
–
33pF  
2.0kΩ  
1.0kΩ  
CDBLB455KCAX36-B0  
CDBKB455KCLX36-R0  
22pF  
27pF  
4.7kΩ  
2.2kΩ  
AF output  
Unit C: F  
1mH  
R: Ω  
NE(SA)607/617  
TA31145  
Vcc  
IF input  
51  
0.1μ 0.1μ  
20 19 18 17 16 15 14 13 12 11  
NE607/617 (PHILIPS)  
+
2.2μ  
3300p  
68k  
430  
C
0.01μ  
20 19 18 17 16 15 14 13 12 11  
TA31145 (TOSHIBA)  
1
2
3
4
5
6
7
8
9
10  
22k  
1
2
3
+
4
5
6
7
8
9
10  
Vcc  
1.5k  
0.01μ  
+10μ  
8.2k  
0.1μ  
X
+
10μ  
R
L
X
Unit C: F  
17  
R
R: Ω  
+
0.1μ  
AF output  
Part Number (X)  
R
IF input  
CDBLB455KCAY40-B0  
CDBKB455KCAY40-R0  
3.3kΩ  
2.7kΩ  
Unit C: F  
R: Ω  
AF output  
Part Number (X)  
CDBKB455KCLX39-R0  
C
R
2.7kΩ  
L
22pF  
1mH  
L: H  
Continued on the following page.  
57  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Test Circuit  
c
TK14590/14591  
MC3361  
Vcc  
(1.3V)  
AF output  
100p  
0.1μ  
0.1μ 1000p  
1μ  
1k  
0.15μ  
100k  
24 23 22 21 20 19 18 17 16 15 14 13  
150k  
16 15 14 13 12 11 10  
9
8
TK14590V (TOKO)  
0.01μ  
8.2k  
AF  
output  
MC3361  
1
2
3
4
5
6
7
8
9 10 11 12  
C
1
2
3
4
5
6
7
0.1μ  
0.01μ  
Unit C: F  
Vcc  
47μ  
R
X
Unit C: F  
0.1μ 0.1μ  
100k 560p  
22  
0.01μ 1μ  
X
R
R: Ω  
R: Ω  
0.1μ  
Part Number (X)  
R
0.022μ  
IF input  
CDBLB455KCAY49-B0  
CDBKB455KCAY49-R0  
1.8kΩ  
1.5kΩ  
Part Number (X)  
C
R
IF input  
CDBLB455KCAY42-B0  
22pF 3.3kΩ  
CXA3117  
NJM2590  
Vcc  
+
100k  
100k  
AF out  
24 23 22 21 20 19 18 17 16 15 14 13  
CXA3117(SONY)  
10μ  
14 13 12  
11 10  
9
8
NJM2590(JRC)  
1
2
3
4
5
6
7
8
9
10 11 12  
Vcc  
1
2
3
4
5
6
7
1200p  
1200p  
0.1μ  
0.1μ  
51  
10k  
Unit C: F  
R: Ω  
X
R
R
X
S.G.  
Part Number (X)  
R
33μ  
0.01μ  
CDBLB455KCAY50-B0  
CDBKB455KCAY50-R0  
8.2kΩ  
6.2kΩ  
+
10μ  
Unit C: F  
R: Ω  
0.01μ  
Part Number (X)  
R
CDBKB455KCAY66-R0  
3.0kΩ  
AF output  
Recovered Audio Curve  
c
CDBKB455KCAY07-R0  
CDBLB455KCAY07-B0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
Continued on the following page.  
17  
58  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Recovered Audio Curve  
c
CDBKB455KCAY09-R0  
CDBLB455KCLY09-B0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
395  
435  
475  
515  
Frequency (kHz)  
Frequency (kHz)  
CDBKB455KCAY13-R0  
CDBKB455KCLY13-R0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
425  
445  
465  
485  
Frequency (kHz)  
Frequency (kHz)  
CDBLB455KCAY13A-B0  
CDBLB455KCLY13-B0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
17  
1
0.1  
1
0.1  
440  
450  
460  
470  
395  
435  
475  
515  
Frequency (kHz)  
Frequency (kHz)  
Continued on the following page.  
59  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Recovered Audio Curve  
c
CDBKB455KCAY16-R0  
CDBLB455KCAX16-B0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
CDBLB455KCAX18-B0  
CDBKB455KCAY24-R0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
CDBLB455KCAY24-B0  
CDBKB455KCAY27-R0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
17  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
Continued on the following page.  
60  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Recovered Audio Curve  
c
CDBKB455KCAY28-R0  
CDBLB455KCAY28-B0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
CDBKB455KCAY29-R0  
CDBLB455KCAY34-B0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
CDBKB455KCAY35-R0  
CDBKB455KCLX36-R0  
500  
50.0  
50  
500  
10  
5
100  
50  
100  
50  
10.0  
5.0  
1
10  
5
10  
5
1.0  
0.5  
0.5  
17  
1
0.1  
1
0.1  
425  
445  
465  
486  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
Continued on the following page.  
61  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Recovered Audio Curve  
c
CDBLB455KCAX36-B0  
CDBKB455KCLX39-R0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
425  
445  
465  
485  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
CDBKB455KCAY40-R0  
CDBLB455KCAY40-B0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
CDBLB455KCAY42-B0  
CDBKB455KCAY49-R0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
17  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
Continued on the following page.  
62  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.±4,±211  
!Note  
P25E.pdf  
Continued from the preceding page.  
Recovered Audio Curve  
c
CDBLB455KCAY49-B0  
CDBKB455KCAY50-R0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
CDBLB455KCAY50-B0  
CDBKB455KCAY66-R0  
500  
50.0  
500  
50.0  
100  
50  
10.0  
5.0  
100  
50  
10.0  
5.0  
10  
5
1.0  
0.5  
10  
5
1.0  
0.5  
1
0.1  
1
0.1  
440  
450  
460  
470  
440  
450  
460  
470  
Frequency (kHz)  
Frequency (kHz)  
Specified by S Curve Characteristics  
Nominal Center  
Frequency (fn)  
(kHz)  
S Curve (1)  
Output Volt. at fn  
(mV)  
S Curve (2)  
at fn 4.8kHz  
(mV)  
Part Number  
IC  
IC Maker  
Type  
CDBKB455KCAY54-R0  
455  
165 ±±2  
172 ±±2  
TA31149  
TOSHIBA  
SMD  
17  
63  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Test Circuit  
S Curve  
c
c
TA31149  
CDBKB455KCAY54-R0  
Vcc (+1.4V)  
0.4  
0.3  
0.2  
0.1  
0.0  
Vcc Vcc Vcc  
10μ  
+
+
430  
24 23 22 21 20 19 18 17 16 15 14 13  
TA31149(TOSHIBA)  
1
2
3
4
5
6
7
8
9
10 11 12  
+
R
X
Unit C: F  
R: Ω  
0.1μ  
IF  
input  
Part Number (X)  
R
CDBKB455KCAY54-R0  
2.7kΩ  
440  
450  
460  
470  
Frequency (kHz)  
17  
64  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators for Communications Equipment  
MHz Type Ceramic Discriminators  
CDSCB10M7 series forms a resonator on a piezoelectric  
ceramic substrate. In combination with ICs, this type  
obtains stable demodulation characteristics in a wide  
bandwidth.  
4.5 0.1  
0.2 0.2  
0.4 0.05  
They have 1.0mm max. thickness and small mounting area  
(4.5x2.0mm).  
4.1 max.  
0.4(ref.)  
0.4(ref.)  
0.8 0.1  
0.8 0.1  
Features  
c
1. Compact and high reliability and recommended for  
CDSCB Series  
automotive applications.  
2. Can be combined with various ICs. The IC is  
determined by the last number in the part number.  
3. Stable demodulation characteristics can be  
obtained without adjustment.  
1.5 0.1 1.5 0.1  
(in mm)  
4. Stable temperature characteristics  
5. Available lead (Pb) free solder reflow.  
Center  
Frequency (fo)  
(MHz)  
Recovered  
Audio 3dB BW  
(kHz)  
Recovered  
Audio Output  
(mV)  
Distortion  
(%)  
S Curve  
(mV)  
Part Number  
IC  
CDSCB10M7GA105A-R0  
CDSCB10M7GA113-R0  
CDSCB10M7GA119-R0  
CDSCB10M7GA121-R0  
CDSCB10M7GA135-R0  
CDSCB10M7GA136-R0  
CDSCB10M7GF072-R0  
CDSCB10M7GF107S-R0  
CDSCB10M7GF109-R0  
CDSCB10M7GF123-R0  
CDSCB10M7GF123S-R0  
CDSCB10M7GF126-R0  
(fn) means nominal center frequency.  
10.700 30kꢀz  
10.700 30kꢀz  
10.700 30kꢀz  
10.700 30kꢀz  
10.700 30kꢀz  
10.700 30kꢀz  
10.700 (fn)  
220 min.  
300 min.  
500 min.  
390 min.  
155 min.  
140 min.  
fn 150 min.  
fn 80 min.  
fn 100 min.  
-
110 min.  
110 min.  
75 min.  
80 min.  
75 min.  
120 min.  
130 min.  
52 min.  
170 min.  
-
1.5 max.  
-
TEA5757ꢀL  
TA2154FN  
TRF6901  
1.0 max.  
-
1.0 max.  
-
1.0 max.  
-
LV23100V  
Tꢀ71101  
-
-
-
-
Tꢀ7122  
2.0 max.  
-
TA31161  
10.700 (fn)  
3.0 max.  
-
TA31272FN  
TK14588V  
TA31275FN  
TA31275FN  
NJM2295AV  
10.700 (fn)  
3.0 max.  
-
10.700 (fn)  
-
-
-
900 min.  
900 min.  
400 min.  
10.700 (fn)  
-
-
10.700 (fn)  
-
-
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.  
For safety purposes, avoid applying a direct current between the terminals.  
18  
65  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Test Circuit  
c
CDSCB10M7GA105A-R0  
CDSCB10M7GA113-R0  
Vcc (1.2V)  
Vcc (3.0V)  
0.1μ  
10μ  
+
48 47 46 45 44 43 42 41 40 39 38 37  
0.1μ  
1
2
36  
35  
34  
33  
32  
31  
30  
29  
28  
27  
26  
25  
+
100μ  
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16  
TA2154FN (TOSHIBA)  
S.S.G.  
3
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15  
4
+
5
X
2.2μ  
6
TEA5757HL  
(PHILIPS)  
7
D.C. OUT  
AF OUT  
8
9
100k  
X: CDSCB10M7GA113-R0  
S.S.G.  
10  
11  
12  
Unit C: F  
R: Ω  
10  
DC OUT  
330p  
13 14 15 16 17 18 19 20 21 22 23 24  
+
4.7μ  
X
0.22μ  
X: CDSCB10M7GA105A-R0  
150  
Unit C: F  
AF OUT  
R: Ω  
CDSCB10M7GA119-R0  
CDSCB10M7GA121-R0  
Vcc (3.0V)  
0.01μ  
AF Output  
D.C. Output  
Vcc (3.2V)  
IF Input  
AF Output  
220k  
68p  
0.01μ  
0.01μ  
0.015μ  
15p  
10  
22μ+  
120p  
4.7μ  
82p  
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19  
LV23100V (SANYO)  
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18  
48 47 46 45 44 43 42 41 40 39 38 37  
0.01μ  
0.01μ  
1
2
3
4
5
6
7
8
9
36  
35  
34  
X
10k  
+
10μ  
0.047μ  
1000p  
+
33  
32  
31  
30  
29  
28  
27  
26  
25  
47p  
TRF6901  
(TEXAS INSTRUMENTS)  
+
0.47μ  
0.01μ  
100p 10  
11  
12  
3.3k  
13 14 15 16 17 18 19 20 21 22 23 24  
+
0.1μ  
0.01μ  
1μ  
0.22μ  
+
0.47μ  
+
S.G.  
10k  
100p  
10k  
18 17 16 15 14 13 12 11 10  
PIC16F84 (Control IC)  
18 17 16 15 14 13 12 11 10  
PIC16F84  
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
X: CDSCB10M7GA119-R0  
1k  
2.2μ  
1k  
10k  
Unit C: F  
R: Ω  
10k  
+
+
Unit C: F  
0.1μ  
2.2μ  
0.1μ  
X: CDSCB10M7GA121-R0  
L: H  
R: Ω  
CDSCB10M7GA135-R0  
CDSCB10M7GA136-R0  
Vcc (5.0V)  
0.1μ  
Vcc (5.0V)  
AF-OUT  
FKS-OUT  
330p  
0.1μ  
24 23 22 21 20 19 18 17  
25  
26  
27  
28  
29  
30  
31  
32  
16  
15  
14  
13  
12  
11  
10  
9
0.01μ  
0.01μ  
100p 1000p 0.01μ  
330k  
TH7122  
[Internal AFC Enabled]  
(MELEXIS)  
330p  
220k  
24 23 22 21 20 19 18 17  
0.01μ  
25  
26  
27  
28  
29  
30  
31  
32  
16  
15  
14  
13  
12  
11  
10  
9
1
2
3
4
5
6
7
8
FKS-OUT  
12p  
C.D.  
0.01μ  
0.1μ  
330p  
0.01μ  
AF-OUT  
1000p  
1000p  
TH71101, TH71102,  
TH71111 or TH71112  
(MELEXIS)  
330p  
100k  
0.033μ  
0.01μ  
S.G.  
0.01μ  
0.01μ  
C.D.  
3.3k  
330p  
330p  
100k  
100p  
1
2
3
4
5
6
7
8
18 17 16 15 14 13 12 11 10  
0.01μ  
PIC16F84 (Control IC)  
S.G.  
1
2
3
4
5
6
7
8
9
18  
1k  
10k  
X: CDSCB10M7GA135-R0  
X: CDSCB10M7GA136-R0  
Unit C: F  
0.1μ  
+
+
10μ  
330p  
Unit C: F  
2.2μ  
R: Ω  
R: Ω  
Continued on the following page.  
66  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Test Circuit  
c
CDSCB10M7GF072-R0  
CDSCB10M7GF107S-R0  
Vcc (5.0V)  
AF Output  
Vcc (3V)  
0.01μ  
+
4.7μ  
24 23 22 21 20 19 18 17 16 15 14 13  
TA31272FN (TOSHIBA)  
R
X
0.01μ  
AF OUT  
10p  
1
2
3
4
5
6
7
8
9
10 11 12  
16 15 14 13 12 11 10  
TA31161 (TOSHIBA)  
9
8
C.D.  
1
2
3
4
5
6
7
0.01μ  
0.01μ  
X: CDSCB10M7GF072-R0  
S.S.G.  
C.D.: Ceramic Discriminator  
+
R: 820  
Unit C: F  
R: Ω  
Unit R: Ω  
C: F  
33μ  
0.01μ  
IF IN  
L: H  
L: H  
CDSCB10M7GF109-R0  
CDSCB10M7GF123-R0  
Vcc (5.0V)  
AF OUT  
DC-OUT  
Vcc (3V)  
R
24 23 22 21 20 19 18 17 16 15 14 13  
TA31275FN (TOSHIBA)  
X
0.01μ  
D.C. OUT  
AF OUT  
1
2
3
4
5
6
7
8
9
10 11 12  
0.01μ  
1000p  
51k  
8p  
12k  
16 15 14 13 12 11 10  
TK14588V (TOKO)  
9
8
X: CDSCB10M7GF123-R0  
S.S.G.  
1
2
3
4
5
6
7
Unit C: F  
R: Ω  
+
S.S.G.  
X: CDSCB10M7GF109-R0  
R: 820  
Unit C: F  
R: Ω  
L: H  
CDSCB10M7GF126-R0  
Vcc (5.0V)  
DC-OUT  
+
20 19 18 17 16 15 14 13 12 11  
NJM2295AV (JRC)  
1
2
3
4
5
6
7
8
9
10  
+
8p  
C.D.  
180  
+
+
X: CDSCB10M7GF126-R0  
S.G.  
Unit C: F  
R: Ω  
18  
67  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Recovered Audio Curve  
c
CDSCB10M7GA105A-R0  
CDSCB10M7GA113-R0  
1000  
100  
10  
100  
10  
1
1000  
100  
10  
100  
10  
1
AF Output  
Distortion  
AF Output  
Distortion  
1
0.1  
1
0.1  
Input = 100dBμ  
fdev. = ±±75Hz  
fmod. = 15Hz  
Vcc = 3.0V  
Input = 100dBμ  
fdev. = ±±75Hz  
fmod. = 15Hz  
Vcc = 1.2V  
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1  
Frequency (MHz)  
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1  
Frequency (MHz)  
CDSCB10M7GA119-R0  
CDSCB10M7GA121-R0  
1000  
100  
1000  
100  
AF Output  
AF Output  
100  
10  
1
10  
100  
10  
1
10  
Distortion  
Distortion  
1
1
0.1  
0.1  
Input = 100dBμ  
fdev. = ±605Hz  
fmod. = 15Hz  
Vcc = 3.0V  
Input = 100dBμ  
fdev. = ±±75Hz  
fmod. = 15Hz  
Vcc = 3.2V  
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1  
Frequency (MHz)  
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1  
Frequency (MHz)  
CDSCB10M7GA135-R0  
CDSCB10M7GA136-R0  
1000  
100  
10  
1000  
100  
10  
1
1
Input = 100dBμ  
fdev. = ±705Hz  
fmod. = 15Hz  
Vcc = 7.0V  
Input = 100dBμ  
fdev. = ±705Hz  
fmod. = 15Hz  
Vcc = 7.0V  
0.1  
10.4  
0.1  
10.4  
18  
10.7  
10.6  
10.±  
10.8  
10.9  
11.0  
10.7  
10.6  
10.±  
10.8  
10.9  
11.0  
Frequency (MHz)  
Frequency (MHz)  
Continued on the following page.  
68  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Continued from the preceding page.  
Recovered Audio Curve  
c
CDSCB10M7GF072-R0  
CDSCB10M7GF109-R0  
1000  
100  
1000  
100  
10  
100  
10  
1
100  
10  
10  
1
1
0.1  
1
0.1  
Input = 100dBμ  
fdev. 80ꢀHz  
Input = 100dBμ  
fdev. 64ꢀHz  
=
=
fmod. = 1ꢀHz  
Vcc = 3.0V  
fmod. = 1ꢀHz  
Vcc = 3.0V  
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1  
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1  
Frequency (MHz)  
Frequency (MHz)  
S Curve  
c
CDSCB10M7GF123-R0  
CDSCB10M7GF126-R0  
2.5  
2.0  
1.5  
1.0  
4.0  
3.0  
2.0  
0.5  
0.0  
1.0  
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1  
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1  
Frequency (MHz)  
Frequency (MHz)  
18  
69  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators Notice  
CDBKB Series Notice (Soldering and Mounting)  
c
1. Standard Reflow Soldering Conditions  
(1) Reflow  
Filter is soldered twice within the following temperature  
conditions.  
Peak  
(260°C max.)  
260  
230  
Heating  
(230°C)  
Pre-heating  
(150-180°C)  
100  
Gradual  
Cooling  
30 sec.  
min.  
60-120 sec.  
40 sec.  
max.  
120 sec.  
min.  
(2) Soldering Iron  
Electrode is directly soldered with the tip of soldering iron  
at +350 5°C for 3.0 0.5 seconds.  
2. Wash  
(1) Cleaning Solvent  
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),  
Water (Demineralized Water), Cleaning Water Solution  
(Cleanthrough-750H, Pine Alpha 100S), Silicon  
(Technocare FRW)  
(2) Cleaning Conditions  
o Immersion Wash  
2 minutes max. in above solvent at +60°C max.  
o Shower or Rinse Wash  
2 minutes max. in above solvent at +60°C max.  
(3) Notice  
o When components are immersed in solvent, be sure to  
maintain the temperature of components below the  
temperature of solvent.  
o Please do not use ultrasonic cleaning.  
o Total washing time should be within 4 minutes.  
o Please ensure the component is thoroughly evaluated  
in your application circuit.  
o Please do not use chlorine, petroleum or alkaline  
cleaning solvents.  
o If you plan to use any other type of solvents, please  
consult with Murata or Murata representative prior to  
using.  
CDBKB Series Notice (Handling)  
c
1. The component will be damaged when an excessive  
5. The product, packed in a moisture-proof bag (dry  
pack), is sensitive to moisture.  
stress is applied.  
2. If the component is cleaned, please confirm  
that the reliability has not been degraded.  
3. In case of covering filter with over coating,  
conditions such as material of resin, cure  
temperature, and so on should be evaluated  
carefully.  
The following treatment is required before  
applying reflow soldering, to avoid package  
cracks or reliability degradation caused by  
thermal stress. When unpacked, store the component  
in an atmosphere of below 25 degrees C. and below  
65%R.H., and solder within 48 hours.  
4. Do not use strong acidity flux, more than 0.2wt%  
chlorine content, in reflow soldering.  
Continued on the following page.  
70  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators Notice  
Continued from the preceding page.  
CDBLB Series Notice (Handling)  
c
1. Do not use this product with bend. The component  
may be damaged if excess mechanical stress is  
applied to it mounted on the printed circuit board.  
2. The component will be damaged when an excessive  
stress is applied.  
5. Do not use strong acidity flux, more than 0.2wt%  
chlorine content, in flow soldering.  
6. In case of covering discriminator with over coating,  
conditions such as material of resin, cure  
temperature, and so on should be evaluated  
carefully.  
3. No type of reflow soldering should be applied to this  
component.  
4. Do not clean or wash the component as it is not  
hermetically sealed.  
71  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators Notice  
CDSCB Series Notice  
c
o Soldering and Mounting  
1. Standard Reflow Soldering Conditions  
(1) Reflow  
Filter is soldered twice within the following temperature  
Peak  
(2605C max.)  
conditions.  
260  
230  
Heating  
(2305C)  
Pre-heating  
(1±0-1805C)  
100  
Gradual  
Cooling  
30 sec.  
min.  
40 sec.  
max.  
120 sec.  
min.  
60-120 sec.  
(2) Soldering Iron  
Filter is soldered at +300±±5C for 3.0±0.± seconds. ꢀhe  
soldering iron should not touch the filter while soldering.  
(3) Condition for Placement Machines  
ꢀhe component is recommended with placement  
machines that employ optical placement capabilities. ꢀhe  
component might be damaged by excessive mechanical  
force. Please make sure that you have evaluated by  
using placement machines before going into mass  
production. Do not use placement machines that utilize  
mechanical positioning. Please contact Murata for details  
beforehand.  
(4) Other  
(a) ꢀhe component may be damaged if excess  
[Component Direction]  
mechanical stress is applied to it mounted on the  
printed circuit board.  
Place the  
component  
laterally to the  
direction in  
which stress  
acts.  
(b) Design layout of components on the PC board to  
minimize the stress imposed on the warp or flexure of  
the board.  
[Component Layout Close to Board]  
(c) After installing components, if solder is excessively  
applied to the circuit board, mechanical stress will  
cause destruction resistance characteristics to  
degrade. ꢀo prevent this, be extremely careful in  
determining shape and dimension before designing  
the circuit board diagram.  
Perforation  
B
Susceptibility to  
stress is in the order  
of : A>C>B  
C
A
Slit  
(d) When the positioning claws and pick-up nozzle are  
worn, the load is applied to the components while  
positioning is concentrated on positioning accuracy,  
etc. Careful checking and maintenance are necessary  
to prevent unexpected trouble.  
(e) When correcting components with a soldering iron,  
the tip of the soldering iron should not directly touch  
the component. Depending on the soldering  
conditions, the effective area of terminations may be  
reduced. Solder containing Ag should be used to  
prevent the electrode erosion.  
Continued on the following page.  
72  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators Notice  
Continued from the preceding page.  
2. Wash  
Do not clean or wash the component as it is not  
hermetically sealed.  
3. Coating  
In case of overcoating the component, conditions such as  
material of resin, cure temperature, and so on should be  
evaluated well.  
o Storage and Operating Conditions  
1. Product Storage Condition  
(2) Please do not put the products directly on the floor  
without anything under them to avoid damp places  
and/or dusty places.  
Please store the products in a room where the  
temperature/humidity is stable, and avoid places where  
there are large temperature changes. Please store the  
products under the following conditions:  
Temperature: -10 to +40°C  
(3) Please do not store the products in places such as a  
damp heated place or any place exposed to direct  
sunlight or excessive vibration.  
Humidity: 15 to 85% R.H.  
(4) Please use the products immediately after the  
package is opened, because the characteristics may  
be reduced in quality and/or be degraded in  
solderability due to storage under poor condition.  
(5) Please do not drop the products to avoid cracking of  
ceramic element.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six months  
after delivery under the conditions of a sealed and  
unopened package. Please use the products within six  
months after delivery. If you store the products for a long  
time (more than six months), use carefully because  
solderability may be degraded due to storage under poor  
conditions.  
4. Other  
Please be sure to consult with our sales representative or  
engineer whenever the products are to be used in  
conditions not listed above.  
Please confirm solderability and characteristics for the  
products regularly.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Sulfides and so on), because the characteristics may  
be reduced in quality and may be degraded in  
solderability due to storage in a chemical atmosphere.  
o Rating  
The component may be damaged if excessive mechanical  
stress is applied.  
o Handling  
1. Accurate test circuit values are required to measure  
electrical characteristics. Miscorrelation may be caused if  
there is any deviation, especially stray capacitance, from  
the test circuit in the specification.  
2. For safety purposes, avoid applying a direct current  
between the terminals.  
73  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging  
Standard Land Pattern Dimensions  
c
CDBKB Series  
CDSCB Series  
3.0  
1.2  
2.6  
1.2  
1.0  
2.0  
1.0  
(in mm)  
(in mm)  
Minimum Quantity  
c
Part Number  
Taping ø180mm  
Bulk  
CDBKB Series  
CDBLB Series  
CDSCB Series  
500  
500  
2000  
(pcs.)  
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.  
CDBKB Series  
c
Dimensions of Carrier Tape  
Dimensions of Reel  
Trailer  
160 to 190  
Leader  
Cover film  
4.0 0.1  
ø1.5  
2.0 0.1  
+0.1  
-0.0  
Empty Components  
Empty  
160 to 200  
400 to 560  
2.0 0.2  
ø13.0 0.5  
8.0 0.1  
3.3 0.1  
User direction of feed  
Cover film  
17.0 0.3  
19.4 1.0  
3° max.  
6.3 0.1  
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ  
(in mm)  
Continued on the following page.  
74  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  
!Note  
P05E.pdf  
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging  
Continued from the preceding page.  
CDSCB Series  
c
$IMENSIONS OF #ARRIER 4APE  
Dimension of reel  
4RAILER  
ꢀ60 to ꢀ90  
,EADER  
Cover film  
4.0 0.ꢀ  
+0.ꢀ  
øꢀ.ꢁ  
-0  
2.0 0.0ꢁ  
%MPTY #OMPONENTS  
%MPTY  
240 to 280  
øꢀ3.0 0.2  
400 to ꢁ60  
+0.ꢀ  
2.0 0.ꢁ  
4.0 0.ꢀ  
øꢀ.ꢁ  
-0  
2.2 0.ꢀ  
0EELING STRENGTH  
0.ꢀ to 0.7N  
(3°)  
Cover film  
+ꢀ.0  
ꢀ0°  
ꢀ3.0  
-0  
ꢀ7.0 ꢀ.0  
User direction of feed  
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ  
(
): Reference  
(in mm)  
75  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
!Note  
P05E.pdf  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011  

相关型号：

SFPKA455KH1A-R1

 Ceramic Discriminators for Communications Equipment
MURATA

SFPL-52

 Ultra-Fast-Recovery Rectifier Diodes (Surface Mount)
SANKEN

SFPL-52

 Rectifier Diode, 1 Element, 0.9A, 200V V(RRM), Silicon, SFP, 2 PIN
ALLEGRO

SFPL-52V3

 Rectifier Diode, 1 Element, 0.9A, Silicon
SANKEN

SFPL-52V4

 Rectifier Diode, 1 Element, 0.9A, Silicon
SANKEN

SFPL-52VL

 暂无描述
SANKEN

SFPL-52W

 暂无描述
SANKEN

SFPL-62

 Ultra-Fast-Recovery Rectifier Diodes (Surface Mount)
SANKEN

SFPL-62

 Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, SFP, 2 PIN
ALLEGRO

SFPL-62V

 Rectifier Diode, 1 Element, 1A, Silicon
SANKEN

SFPL-62VL

 Rectifier Diode, 1 Element, 1A, Silicon
SANKEN

SFPL-64

 Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, SFP, 2 PIN
ALLEGRO
©2020 ICPDF网 联系我们和版权申明