TZ03Z050Y169A00 [MURATA]
Variable Capacitor, Ceramic, 100V, 1.5pF Min, 5pF Max, Vertical Adjuster, Through Hole Mount, RADIAL LEADED;
| 型号： | TZ03Z050Y169A00 |
| 厂家： | 
muRata |
| 描述： | Variable Capacitor, Ceramic, 100V, 1.5pF Min, 5pF Max, Vertical Adjuster, Through Hole Mount, RADIAL LEADED |
| 文件： | 总7页 (文件大小：111K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
T13E8.pdf 02.9.2
Ceramic Trimmer Capacitors
TZ03 Series
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
■ Features
1. Color coded case facilitates identification of
capacitance range.
2. Sealed construction prevents the penetration of
flux and dust.
6
6.6
0.25±0.05
0.2±0.05
1.2±0.1
1.0±0.1
3.1
3.5
3. Available in three adjustment styles : Top/Rear/
Side.
4. Available in both tape and reel and magazine
packaging for automatic insertion.
5. +(Cross-shaped) slot enables automatic adjustment.
B Type
E Type
N Type
Y Type
Tolerance:±0.5
in mm
■ Applications
2.5±0.2 dia.
•Car audio systems
•Car clocks
0.5±0.2 Depth 0.5 min .
•Stereos
•Radio cassette tape recorders
•Cordless telephones •Video games
•Compact radio equipments
•Remote keyless entry systems
•Burglarproof devices
6
1.0±0.1
1.0±0.1
Tolerance:±0.5
in mm
0.25±0.05
0.2±0.05
2.5±0.2 dia.
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
0.5±0.2 Depth 0.5 min.
6.0
6
7.8
6.4
1.2±0.1
1.0±0.1
3.0
3.4
7
1.0±0.1
1.0±0.1
F Type
6.6
Tolerance:±0.5
Tolerance:±0.5
in mm
in mm
2.5±0.2 dia.
Trimmer Cap. Body
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
2.5
0.5±0.2 Depth 0.5 min.
Socket
6.0
1.2
3.7
3.5
5
7
0.3
4.5
1.2
1.2
7.5
Solder
T Type
2.5±0.3
Tolerance:±0.5
in mm
Tolerance:±0.5
in mm
34
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
T13E8.pdf 02.9.2
Cmin.
(pF)
Cmax.
(pF)
Rated Withstanding
Part Number
TC
Q
Stator/Case Color
Voltage
Voltage
TZ03Z2R3p169
TZ03Z050p169
TZ03Z070p169
TZ03N100p169
TZ03Z100p169
TZ03T110p169
TZ03R200p169
TZ03T200p169
TZ03R300p169
TZ03P450p169
TZ03P600p169
TZ03Z500p169
TZ03R900p169
TZ03R121p169
1.25 max.
1.5 max.
2.0 max.
2.1 max.
2.7 max.
3.0 max.
4.2 max.
4.2 max.
5.2 max.
6.8 max.
9.8 max.
6.0 max.
9.0 max.
10.0 max.
2.3 +50/-0%
5.0 +50/-0%
NP0±200ppm/°C
NP0±200ppm/°C
NP0±200ppm/°C
N200±200ppm/°C
NP0±200ppm/°C
N450±300ppm/°C
N750±300ppm/°C
N450±300ppm/°C
N750±300ppm/°C
300min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
110Vdc
110Vdc
110Vdc
Black
Blue
7.0 +50/-0%
Blue
10.0 +50/-0%
10.0 +50/-0%
11.0 +50/-0%
20.0 +50/-0%
20.0 +50/-0%
30.0 +50/-0%
45.0 +50/-0%
60.0 +50/-0%
50.0 +100/-0%
90.0 +100/-0%
White
Blue
White
Red
Pink
Green
Yellow
Brown
Orange
Black+Dot
Black
N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc
N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc
NP0±300ppm/°C
N750±300ppm/°C
300min. at 1MHz, Cmax. 50Vdc
300min. at 1MHz, Cmax. 50Vdc
300min. at 1MHz, Cmax. 50Vdc
120.0 +100/-0% N750±300ppm/°C
Insulation Resistance : 10000M ohm min. Torque : 2.0~15.0mNm Operating Temperature Range : -25~+85°C
A blank column is filled with terminal type codes.
■ Construction
■ Mounting Holes
B Type
E Type
3 dia.
1±0.1
7
3
3.3
5
6.3
Tolerance:±0.5
in mm
Tolerance:±0.5
in mm
Continued on the following page.
35
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
T13E8.pdf 02.9.2
Continued from the preceding page.
■ Mounting Holes
F Type
N Type
3 dia.
1±0.1
3
3.3
5
Tolerance:±0.5
in mm
Tolerance:±0.5
in mm
T Type
Y Type
5
5
Tolerance:±0.5
in mm
Tolerance:±0.5
in mm
■ Temperature Characteristics
Z070 (NP0±200ppm/°C)
T110 (N450±300ppm/°C)
+6
+4
+2
+6
+4
+2
85
55
Temp. (°C)
20
55
85
20
0
0
–25
0
0
7
–25
–2
Temp. (°C)
–2
–4
–6
–4
–6
R200 (N750±300ppm/°C)
P600 (N1200±500ppm/°C)
+6
+8
+4
+2
+6
+4
+2
55
85
20
20
55
85
0
0
–25
0
Temp. (°C)
0
–25
Temp. (°C)
–2
–2
–4
–6
–8
–4
–6
–10
Continued on the following page.
36
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
T13E8.pdf 02.9.2
Continued from the preceding page.
■ Temperature Characteristics
Z500 (NP0±300ppm/°C)
R121 (N750±300ppm/°C)
+8
+8
+6
+4
+6
+4
+2
55
20
85
+2
55
85
20
0
–2
–25
0
–2
–25
0
Temp. (°C)
Temp. (°C)
0
–4
–6
–8
–4
–6
–8
–10
–10
■ Frequency Characteristics
T110
Z070
1000
100
10
1000
1000
100
10
1000
100
100
Q
Q
10
10
1
100 200 300 400 500 600 700 800 900 1000
Frequency(MHz)
1
100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
R200
P450
7
1000
1000
1000
1000
100
100
100
100
Q
Q
10
10
10
10
1
100
200
300
400
500
1
100
200
300
400
500
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
37
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
T13E8.pdf 02.9.2
Continued from the preceding page.
■ Frequency Characteristics
P600
R900
1000
1000
1000
100
10
1000
100
10
100
100
Q
Q
10
10
1
100
200
300
400
500
1
100
200
300
400
500
Frequency (MHz)
Frequency (MHz)
■ Temperature Profile
Flow
Gradual Cooling
(in air)
Solderring
Preheating (in air)
250
200
100
0
60 sec. to 120 sec.
5 sec. max.
■ Screwdriver and Screwdriver Bit
Please use the following recommended screwdriver.
You can order this driver with below part number.
Though you can also adjust the capacitance value by
commercial products, please use one which has the same
head size as the below driver.
7
Screwdriver for Manual Adjustment
Screwdriver Bit for Automatic Adjustment
Murata Part No. : KMDR010
Murata Part No. : KMBT010
122
30
50
20
Bit shape ; Minus (2.2×0.4)
Bit shape ; Minus (2.2×0.4)
(in mm)
(in mm)
38
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
T13E8.pdf 02.9.2
■ Notice (Storage and operating condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
8. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxie gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 C. and 30 to 85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of deliverly.
(2) In liquid (Ex. water, oil, medical liquid,
organic solvent, etc.)
5. Open the package just before using.
(3) Dusty / dirty atmosphere
6. Prior to storing previously opened packages, the
packaging should be heat-sealed. Avoid using
rubber bands for repackage.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
7. Do not store under direct sunlight.
(7) Other variations of the above
■ Notice (Soldering)
1. Soldering
cleaning).
(1) TZ03 series can be soldered by flow soldering
method and soldering iron. Do not use reflow
soldering method.
To prevent the deterioration of trimmer
capacitor characteristics, apply flux only to
terminals.
(2) Standard soldering condition
(a) Flow soldering : Refer to the standard
temperature profile.
2. Mounting
(1) Do not apply excessive force (preferable 5.0N
(Ref.; 500gf)max.), when the trimmer capacitor
is mounted on the PCB.
(b) Soldering iron :
> Temperature of tip 260+-10 C.
(2) Use the suitable PCB holes which are the same
pitch as the terminal of the trimmer capacitor.
If it would not fit with the terminal, the
excessive stress would be applied to the
terminal and the trimmer capacitor may deviate
from the specified characteristics.
> Soldering time
> Diameter
3 sec. max.
3mm max.
30W max.
> Wattage of iron
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer capacitor may deviate from the
specified characteristics.
(3) Do not apply bending stress more than 10.0N
(Ref.; 1kgf) after the trimmer capacitor has
been mounted on the PCB.
(4) Mount trimmer capacitor in contact with PCB.
(5) In case of bending the terminals, do not apply
excessive force to the body of the product and
prevent the terminal fixing part from damaging.
3. Cleaning [with cover film type]
(3) The dimension of mounting hole should be used
Murata's standard mounting hole at flow
soldering. The amount of solder is critical.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause the
bridging between the terminals or the contact
failure due to flux wicking up.
7
(1) Isopropyl alcohol and Ethyl alcohol are
available material for cleaning. Water group
material like Pinealpha, Cleanthru can not be
used. For other materials, please consult with
Murata factory representative prior to using.
(2) The total cleaning time by dipping, vapor and
ultra-sonic method shall be less than 2 minutes.
For ultra-sonic cleaning, the available
condition is as follows.
(4) When using soldering iron, the string solder
shall be applied to the lower part of the
terminal only and do not apply flux except the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the
terminal may cause fixed rotor or the contact
failure due to flux invasion into the movable
part and/or the contact point. The soldering
iron should not come in contact with the
plastic case of the trimmer capacitor. If such
contact does occur, the trimmer capacitor may
be damaged.
> Cleaning time
> Power
: 30 sec. max.
: 20W/liter max.
: 20 - 60kHz
> Frequency
> Temperature
: Ambient temperature
Due to the ultra-sonic cleaning equipment
peculiar self resonance point and the cleaning
compatibility usually depends on the jig
construction and/or the cleaning condition such
as the depth of immersion, please check the
cleaning equipment to determine the suitable
conditions. If the trimmer capacitor is cleaned
(5) Our recommendable chlorine content of string
solder is 0.5wt% max.
(6) Do not use water-soluble flux (for water
Continued on the following page.
39
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
T13E8.pdf 02.9.2
Continued from the preceding page.
by other conditions, the trimmer capacitor may
deviate from the specified characteristics.
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
4. Other
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
excessive force(preferable 1.0N(Ref; 100gf) max.)
to minimize capacitance drift. If excessive force
applied to the screwdriver slot, it may cause
deformation of the products.
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA : KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
MURATA : KMBT010
2. When adjusting with a screwdriver, do not apply
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
7
40
相关型号：
TZ03Z070B169A00
Variable Capacitor, Ceramic, 100V, 2pF Min, 7pF Max, Vertical Adjuster, Through Hole Mount, RADIAL LEADED
MURATA
TZ03Z070F169M00
Variable Capacitor, Ceramic, 100V, 2pF Min, 7pF Max, Vertical Adjuster, Through Hole Mount, RADIAL LEADED
MURATA
TZ03Z100E169B00
Variable Capacitor, Ceramic, 100V, 2.7pF Min, 10pF Max, Vertical Adjuster, Through Hole Mount, RADIAL LEADED
MURATA
©2020 ICPDF网 联系我们和版权申明