TZY2R200A001 [MURATA]
Ceramic Trimmer Capacitors; 陶瓷微调电容器型号: | TZY2R200A001 |
厂家: | muRata |
描述: | Ceramic Trimmer Capacitors |
文件: | 总44页 (文件大小:1337K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
08.8.27
Ceramic Trimmer
Capacitors
Cat.No.T13E-13
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
0. 8.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for EU RoHS Compliant
•
All the products in this catalog comply with EU RoHS.
•
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
•
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
CONTENTS
Part Numbering
Selection Guide of Ceramic Trimmer Capacitor
2
3
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
TZR1 Series
TZS2 Series
TZY2 Series
TZV2 Series
TZC3 Series
TZW4 Series
TZB4 Series
TZ03 Series
4
8
12
16
20
24
27
32
37
39
41
Packaging
Recommended Adjustment Tools
Qualified Standards
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Ceramic Trimmer Capacitors
(Part Number)
TZ Y2
R
200
A
001 R00
q
w
e
r
t
y
u
qProduct ID
tTerminal Shape
Product ID
Code
Terminal Shape
Top Adjustment: TZR1, TZS2, TZY2, TZV2,
TZC3, TZW4, TZB4 (SMD Type)
TZ
Trimmer Capacitors
A
wSeries/Terminal
B
E
F
Top Adjustment: TZB4 (SMD Type)
Rear Adjustment: TZB4 (SMD Type)
Top Adjustment: TZ03 (Lead Type)
Rear Adjustment: TZ03 (Lead Type)
Code
03
Series/Terminal
6mm Size Lead Type
4mm Size SMD Type
4mm Size SMD Type
3mm Size SMD Type
B4
W4
C3
S2
N
Please refer to dimensions for terminals in detail.
yIndividual Specifications
2mm Size SMD Type (Height 1.0mm)
2mm Size SMD Type (Height 1.25mm)
2mm Size SMD Type (Height 1.45mm)
1mm Size SMD Type (Height 0.90mm)
Y2
Code
001
Individual Specifications
V2
TZR1, TZS2, TZY2, TZW4 Standard Type
TZV2, TZC3 Standard Type
R1
110
169
TZ03 Standard Type
eTemperature Characteristics
A10
B10
TZB4 No-cover Film Standard Type
TZB4 with Cover Film Standard Type
Code
Temperature Characteristics
Z
R
K
P
NP0ppm/°C
N750ppm/°C
N1000ppm/°C
N1200ppm/°C
uPackaging
Code
B00
Packaging
Bulk
Please refer to ratings for tolerance of temperature characteristics.
R00
Reel (Taping ø180mm)
Reel (Taping ø330mm)
R01*
rMaximum Capacitance
* Only TZB4.
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros which follow the two
numbers. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guide of Ceramic Trimmer Capacitor
Start
Mounting Method
Surface Mount
PCB Insertion
Soldering Method
Reflow
Flow
Manual Insertion
Height 0.90mm max.
1.5(W) x 1.7(L)
Height 1.7mm max.
3.2(W) x 4.5(L)
Height 3.2mm max.
4.0(W) x 4.5(L)
Height 5.3mm max.
6.0(W) x 6.0(L)
TZR1
TZC3
TZB4_A
(with cover film)
TZ03_F
TZ03_N
Height 1.00mm max.
2.2(W) x 2.7(L)
Height 3.2mm max.
4.0(W) x 4.5(L)
TZB4_B
(with cover film)
TZS2
TZB4_A
TZB4_B
Height 1.25mm max.
2.5(W) x 3.2(L)
TZB4_E
(with cover film)
TZY2
Height 1.45mm max.
2.3(W) x 3.2(L)
TZB4_E
High Frequency Power
TZV2
Height 2.6mm max.
4.2(W) x 5.2(L)
TZW4
All products of Ceramic Trimmer Capacitor comply with RoHS and ELV
3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Ceramic Trimmer Capacitors
TZR1 Series
1.7
■ Features
(Depth;0.15)
0.2
1. Ultra-small and thin with external dimensions
of 1.5(W)x1.7(L)x0.85(H)mm
(80% less in volume than the current product).
2. Unique construction with no plastic material
provides superior soldering heat resistance to
maintain excellent characteristic performance
after reflow soldering.
0.35
3. Suitable for high frequency circuit due to high
self resonant frequency (6.2GHz of TZR1Z010 at
1.0pF setting)
Tolerance: ±0.1
(
)
in mm
■ Applications
1. "Bluetooth"
2. Crystal oscillators
4. Hand radios
3. Crystal filters
5. Miniature tuner packs (FM Radio, TV)
6. Remote keyless entry systems
7. Pagers
C min. (max.)
C max.
(pF)
Rated
Voltage
Withstanding
Voltage
Part Number
(pF)
TC
Q
TZR1Z010A001
TZR1Z1R5A001
TZR1Z040A001
TZR1R080A001
0.55
0.7
1.0 +100/-0%
1.5 +100/-0%
4.0 +100/-0%
8.0 +100/-0%
NP0±300ppm/°C
NP0±300ppm/°C
NP0±500ppm/°C
N750±500ppm/°C
200min. at 200MHz, Cmax.
200min. at 200MHz, Cmax.
300min. at 1MHz, Cmax.
300min. at 1MHz, Cmax.
25Vdc
25Vdc
25Vdc
25Vdc
55Vdc
55Vdc
55Vdc
55Vdc
1.5
3.0
Insulation Resistance: 10000M ohm Torque: 0.1 to 1.0mNm Operating Temperature Range: -25 to +85°C
■ Construction
Cover
Metal Rotor
Monolithic
Stator
4
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
1
TZR1Z010
TZR1Z1R5
Z010 (NP0±300 ppm/°C)
Z1R5 (NP0±300 ppm/°C)
+8
+6
+4
+8
+6
+4
+2
0
+2
0
65
85
65
85
-25
-25
20
20
0
0
-2
-4
-2
-4
-10
-10
45
45
Temp. (°C)
Temp. (°C)
-6
-6
-8
-8
-10
-12
-10
-12
TZR1Z040
TZR1R080
R080 (N750±500 ppm/°C)
Z040 (NP0±500 ppm/°C)
+8
+6
+8
+6
+4
+4
+2
20
Temp.(°C)
+2
85
45
65
85
65
0
0
−2
−25
−10
0
−25
20
−2
−4
0
45
−10
−4
Temp.(°C)
−6
−8
−6
−8
−10
−10
−12
−12
■ Frequency Characteristics
TZR1Z010
TZR1Z1R5
Z010
Z1R5
10000
10000
1000
100
1000
100
0.55pF set
0.7pF set
Q
Q
10
1
10
1
1.0pF set
1.5pF set
0
0
0
2
4
6
8
10
0
2
4
6
8
10
Frequency (GHz)
Frequency (GHz)
TZR1Z040
TZR1R080
Z040
R080
1000
1000
100
1000
100
1000
100
100
10
1
Q
Q
10
10
1
10
500 1000 1500 2000 2500
Frequency (MHz)
500
1000
Frequency (MHz)
1500
2000
Continued on the following page.
5
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Land Pattern
1
2.2
1.2
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245±3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
6
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Soldering and Mounting)
1. Soldering
1
(6) Our recommended chlorine content of solder is
as follows.
(1) TZR1 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(2) Soldering condition
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breaking.
(3) Use the suitable dimension of the pick-up nozzle
(1.1-1.2mm external diameter and 0.8-0.9mm bore
diameter).
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
driver slot.
*Recommended screwdriver for manual adjustment
MURATA: KMDR160
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 0.5 N [Ref: 50gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
7
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZS2 Series
2.7
0.6
0.20 Depth
■ Features
2
1. Ultra-small and thin type with external dimensions
of 2.2(W)x2.7(L)x0.95(H)mm
(30% less in volume from the current product).
2. Unique construction with no plastic material
provides superior soldering heat resistance to
0.4
maintain excellent characteristic performance
after reflow soldering.
3. Pierced square hole allows for high resistance to
Tolerance: ±0.1
tuning force and in-process automatic adjustment.
in mm
■ Applications
1. Crystal oscillators
2. Crystal filters
3. Hand radios
4. Cordless telephones
5. Cellular telephones 6. Tuner packs
7. Pagers
8. Remote keyless entry systems
9. PHS
10. Radar detectors
12. Compact radios
11. W-LAN
13. Headphone stereos
C min. (max.)
(pF)
C max.
(pF)
Rated
Voltage
Withstanding
Voltage
Part Number
TC
Q
TZS2Z060A001
TZS2Z100A001
TZS2R200A001
3.0
3.5
7.0
6.0 +100/-0%
10.0 +100/-0%
20.0 +100/-0%
NP0±300ppm/°C
NP0±300ppm/°C
N750±500ppm/°C
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
25Vdc
25Vdc
25Vdc
55Vdc
55Vdc
55Vdc
Insulation Resistance: 10000M ohm Torque: 0.5 to 5.0mNm Operating Temperature Range: -25 to +85°C
■ Construction
Cover
Metal Rotor
Monolithic
Stator
8
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZS2Z060
TZS2Z100
Z100 (NP0±300 ppm/°C)
Z060 (NP0±300 ppm/°C)
+8
+6
+4
+8
+6
+4
+2
+2
85
Temp.(°C)
2
65
0
0
−25
−25
20
65
20
85
−2
−4
0
0
−2
−4
45
−10
45
−10
Temp.(°C)
−6
−8
−6
−8
−10
−10
−12
−12
TZS2R200
R200 (N750±500 ppm/°C)
+8
+6
+4
+2
20
Temp.(°C)
85
45
65
0
−2
−25
−10
0
−4
−6
−8
−10
−12
■ Frequency Characteristics
TZS2Z060
TZS2Z100
Z100
Z060
1000
1000
1000
1000
100
100
100
100
Q
Q
10
10
10
10
1
1
200
400
600
800
1000
500
1000
1500
2000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
9
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZS2R200
R200
1000
1000
2
100
100
Q
10
10
1
200
400
600
800
1000
Frequency (MHz)
■ Land Pattern
3.2
2.1
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245±3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
10
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
2
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)
1. Soldering
part and/or the contact point. The soldering
iron should not come in contact with the
monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(1) TZS2 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
(6) Our recommended chlorine content of solder is
as follows.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer capacitor may deviate from the
specified characteristics.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.3mm bore
diameter).
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower part
of the terminal only. Do not apply flux except
to the terminals. Excessive amounts of solder
and/or applying solder to the upper part of the
terminal may cause fixed metal rotor or contact
failure due to flux invasion into the movable
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR050
(2) Recommended screwdriver bit for automatic
adjustment
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
MURATA: KMBT050
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
11
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZY2 Series
3.2±0.2
0.45
■ Features
1. Small and thin size with external dimensions
of 2.5(W)x3.2(L)x1.25max.(H)mm
2. New shape of cover can improve the flux invasion
compared with current products.
3. Improvement of the adhesion between rotor and
stator leads to superior stability.
0.5
3
4. Unique construction with no plastic material
provides superior soldering heat resistance to
maintain excellent characteristic performance
Tolerance: ±0.1
(
)
in mm
after reflow soldering.
5. Suitable for high frequency circuit due to high
self resonant frequency (4.8GHz of TZY2Z010 at
1.0pF setting)
■ Applications
1. Crystal oscillators
2. Crystal filters
4. Cordless telephones
6. Hand radios
3. Pagers
5. PHS
7. Cellular telephones
8. Watches
9. Remote keyless entry systems
10. W-LAN
11. Radar detectors
12. Compact radios
14. Burglarproof devices
13. DVDs
15. Headphone stereos
C min. (max.)
C max.
(pF)
Rated
Voltage
Withstanding
Voltage
Part Number
TC
Q
(pF)
TZY2Z010A001
TZY2Z2R5A001
TZY2Z030A001
TZY2Z060A001
TZY2Z100A001
TZY2R200A001
TZY2R250A001
TZY2K450A001
0.5
0.65
1.5
2.5
3.0
4.5
5.5
8.0
1.0 +100/-0%
2.5 +100/-0%
3.0 +100/-0%
6.0 +100/-0%
10.0 +100/-0%
20.0 +100/-0%
25.0 +100/-0%
45.0 +100/-0%
NP0±300ppm/°C
NP0±300ppm/°C
NP0±300ppm/°C
NP0±300ppm/°C
NP0±300ppm/°C
N750±500ppm/°C
N750±500ppm/°C
N1000±500ppm/°C
200min. at 200MHz, Cmax.
200min. at 200MHz, Cmax.
300min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
300min. at 1MHz, Cmax.
300min. at 1MHz, Cmax.
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
Insulation Resistance: 10000M ohm Torque: 0.5 to 5.0mNm Operating Temperature Range: -25 to +85°C
■ Construction
Cover
Metal Rotor
Monolithic
Stator
12
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZY2Z010
TZY2Z100
Z100 (NP0±300 ppm/°C)
Z010 (NP0±300 ppm/°C)
+8
+6
+4
+8
+6
+4
+2
0
Temp. (°C)
+2
Temp.(°C)
0
65
85
-25
20
−25
0
65
-2
-4
20
85
-10
45
0
−2
−4
45
−10
-6
−6
−8
-8
-10
-12
−10
−12
3
TZY2R200
TZY2K450
K450 (N1000±500ppm/°C)
R200 (N750±500 ppm/°C)
+12
+10
+8
+6
+8
+6
+4
+2
+4
+2
20
Temp.(°C)
Temp. (°C)
85
85
45
65
45
65
20
0
−2
−25
−10
0
0
0
25
–2
–4
–6
−4
−6
−8
–8
–10
–12
−10
−12
■ Frequency Characteristics
TZY2Z010
TZY2Z100
Z010
Z100
1000
1000
1000
100
10
100
100
Q
Q
0.5pF set
10
10
1.0pF set
1
1
0
2
4
Frequency (GHz)
6
8
200
400
600
800
1000
Frequency (MHz)
Continued on the following page.
13
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZY2R200
TZY2K450
R200
K450
1000
1000
1000
1000
100
10
1
100
100
100
Q
Q
10
10
10
3
1
200
400
600
800
1000
200
400
600
800
Frequency (MHz)
Frequency (MHz)
■ Land Pattern
4.0
2.4
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245±3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
14
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
3
■ Notice (Soldering and Mounting)
1. Soldering
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(1) TZY2 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
(6) Our recommended chlorine content of solder is
as follows.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 120 micro m to 170 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.3mm bore
diameter).
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
driver slot.
(1) Recommended screwdriver for manual adjustment
ENGINEER INC.: DA-89
(Murata: KMDR060)
(2) Recommended screwdriver bit for automatic
adjustment
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
MURATA: KMBT060
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
15
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZV2 Series
3.2±0.2
0.5 Depth 0.2
■ Features
1. Small size with external dimensions of
2.3(W)x3.2(L)x1.45max.(H)mm
Marking(6pF)
2. Unique construction with no plastic material
Marking(10pF)
provides superior soldering heat resistance to
maintain excellent characteristic performance after
reflow soldering.
3. Designed for automatic placement in surface mount
applications.
Tolerance: ±0.1
4. Funnel shaped metal case enables in-process
in mm
automatic adjustment.
■ Applications
4
1. Crystal oscillator
3. Hand radios
5. Cellular telephones
7. Pagers
2. Crystal filters
4. Cordless telephones
6. Tuner packs
8. Remote keyless entry systems
10. Radar detectors
12. Compact radios
9. PHS
11. W-LAN
13. Headphone stereos 14. DVDs
15. Burglarproof devices
C min. (max.)
C max.
(pF)
Rated
Voltage
Withstanding
Voltage
Part Number
(pF)
TC
Q
TZV2Z2R5A110
TZV2Z030A110
TZV2Z060A110
TZV2Z100A110
TZV2R200A110
0.65
1.5
2.5
3.0
4.5
2.5 +100/-0%
3.0 +100/-0%
6.0 +100/-0%
10.0 +100/-0%
20.0 +100/-0%
NP0±300ppm/°C
NP0±300ppm/°C
NP0±300ppm/°C
NP0±300ppm/°C
N750±500ppm/°C
200min. at 200MHz, Cmax.
300min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
Insulation Resistance: 10000M ohm Torque: 1.0 to 9.8mNm Operating Temperature Range: -25 to +85°C
■ Construction
Cover
Spring Washer
Metal Rotor
Monolithic Stator
16
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZV2Z2R5
TZV2Z060
Z2R5 (NP0±300 ppm/°C)
Z060 (NP0±300 ppm/°C)
+8
+6
+4
+8
+6
+4
+2
Temp.(°C)
+2
0
85
65
0
−25
65
85
20
−2
−25
0
20
45
−10
−2
−4
0
45
−10
−4
Temp.(°C)
−6
−8
−6
−8
−10
−10
−12
−12
TZV2Z100
TZV2R200
R200 (N750±500 ppm/°C)
Z100 (NP0±300 ppm/°C)
+8
+6
+8
+6
+4
4
+4
+2
20
Temp.(°C)
+2
85
45
65
Temp.(°C)
85
0
0
−2
−25
−10
0
−25
65
20
0
−2
−4
45
−10
−4
−6
−8
−6
−8
−10
−10
−12
−12
■ Frequency Characteristics
TZV2Z2R5
TZV2Z060
Z060
Z2R5
1000
1000
1000
1000
100
100
100
100
Q
Q
10
10
10
10
1
1
500
1000
1500
2000
500
1000
1500
2000
2500
3000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
17
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZV2Z100
TZV2R200
R200
Z100
1000
1000
1000
1000
100
100
100
100
Q
Q
10
10
10
10
1
1
200
400
600
800
1000
200
400
600
800
1000
Frequency (MHz)
Frequency (MHz)
4
■ Land Pattern
4.0
2.4
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245±3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
18
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)
1. Soldering
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(1) TZV2 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
4
(2) Soldering condition
Refer to the temperature profile.
(6) Our recommended chlorine content of solder is
as follows.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 120 micro m to 170 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause
bridging between the terminals or contact
failure due to flux wicking up.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.3mm bore
diameter).
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
driver slot.
(1) Recommended screwdriver for manual adjustment
VESSEL: No.9000 -0.9x30
(Murata: KMDR020)
(2) Recommended screwdriver bit for automatic
adjustment
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
MURATA: KMBT020
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
19
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZC3 Series
■ Features
1. Small size with external dimension of
0.5
2.5 dia.
3.2(W)x4.5(L)x1.6(H)mm
4.5
2. Color coded stator permits easy identification of
capacitance and reduces mounting errors.
3. Can be adjusted with conventional adjustment tools
having a thickness of 0.5mm.
4.5
4. Designed for automatic placement in surface mount
applications.
Tolerance: ±0.1
5. Heat resistant resin withstands reflow soldering
in mm
0.6
0.6
temperatures.
■ Applications
1. Compact radios
3. Pagers
2. Headphone stereos
4. Portable radio equipments
6. Cellular telephones
5. Hybrid ICs
7. Cordless telephones 8. Remote keyless entry systems
C min. (max.)
(pF)
C max.
(pF)
Rated Withstanding
Part Number
TC
Q
Stator/Case Color
Voltage
Voltage
5
TZC3Z030A110
TZC3Z060A110
TZC3R100A110
TZC3P200A110
TZC3P300A110
1.4
2.0
3.0
5.0
6.5
3.0 +50/-0%
6.0 +50/-0%
10.0 +50/-0%
20.0 +50/-0%
30.0 +50/-0%
NP0±300ppm/°C
NP0±300ppm/°C
N750±300ppm/°C
300min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
Brown
Blue
White
Red
N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc
N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc
Green
Insulation Resistance: 10000M ohm Torque: 1.5 to 9.8mNm Operating Temperature Range: -25 to +85°C
■ Construction
Center axis
Rotor spring terminal
Ceramic plate
Stator
(One molded injection
with stator terminal)
Stator terminal
20
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZC3Z030
TZC3Z060
Z060 (NP0±300 ppm/°C)
Z030 (NP0±300 ppm/°C)
+8
+6
+4
+8
+6
+4
Temp.(°C)
Temp.(°C)
+2
0
+2
0
20
20
85
0
45
0
45
−10
−10
−2
−4
−2
−4
65
−25
65
−25
85
−6
−8
−6
−8
−10
−10
−12
−12
TZC3R100
TZC3P200
R100 (N750±300 ppm/°C)
P200 (N1200±500ppm/°C)
+8
+6
+4
+2
+8
+6
+4
+2
65
45
0
85
85
45
65
0
20
−2
20
–2
−25
Temp.(°C)
−10
0
–25
–10
0
Temp.(°C)
−4
–4
−6
−8
–6
–8
–10
−10
5
–12
−12
■ Frequency Characteristics
TZC3Z030
TZC3Z060
Z030
Z060
1000
1000
1000
1000
100
100
Q
100
100
Q
10
10
10
10
1
1
100
500
1000
1500
2000
100
500
1000
1500
2000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
21
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZC3R100
TZC3P200
R100
P200
1000
1000
100
10
1000
1000
Q
Q
100
100
100
10
10
10
1
1
200
400
600
800
1000
200
400
600
800
1000
Frequency (MHz)
Frequency (MHz)
■ Land Pattern
+0
−0.5
5.0
3.3±0.1
5
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245±3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
22
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
(4) Direct sunlight
5. Do not store under direct sunlight.
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)
1. Soldering
soldering iron should not come in contact with
the stator of the trimmer capacitor. If such
contact does occur, the trimmer capacitor may
be damaged.
(1) TZC3 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
(6) Our recommended chlorine content of solder is as follows.
(a) Solder paste: 0.2wt% max.
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(3) The amount of solder is critical.
5
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
(8) When soldering the TZC3 series, the solder
should not flow into the staking part of the
substrate. If such flow does occur, driver slot
rotation will be damaged.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into the
movable part and/or the contact point. The
(3) Use the suitable dimension of the pick-up nozzle
(2.5mm external diameter and 1.5mm bore diameter).
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
driver slot.
(1) Recommended screwdriver for manual adjustment
Standard type --> MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
Standard type --> MURATA: KMBT010
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
23
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZW4 Series
5.2±0.2
1.6
0.4 Depth
■ Features
1. To meet high power application due to withstanding
voltage 550Vdc
2. Extremely high self resonant frequency
(More than 3GHz at rated C max.)
3. Typical application: Impedance matching for Cellular
3.0
Base Station
4. High Q value in more than VHF, UHF and Microwave bands
(More than 200 in 500MHz, C max.)
5. Available for pick and place machine. Possible
thinner design due to 2.6mm low profile.
+0.1
0.3
-0.2
Tolerance: ±0.1
2.2
(
)
in mm
6. Non electrical contact construction
(rotor as middle electrode) provides high reliability.
7. Compact size due to 4.2(W)x5.2(L)x2.6max.(H)mm.
■ Applications
1. Transmitting power amplifier for Cellular Base Station
2. Transmitting amplifier for PHS Base Station
3. High frequency electric circuit
4. High power radio transmission
5. Transponder amplifier for cable TV
C min. (max.)
(pF)
C max.
(pF)
Rated
Voltage
Withstanding
Voltage
Part Number
TC
Q
TZW4Z010A001
TZW4Z1R5A001
0.4
0.4
1.0 +50/-0%
NP0±150ppm/°C
NP0±150ppm/°C
200min. at 500MHz, Cmax.
200min. at 500MHz, Cmax.
250Vdc
250Vdc
550Vdc
550Vdc
1.5 +100/-0%
6
Insulation Resistance: 10000M ohm Torque: 1.5 to 10.0mNm Operating Temperature Range: -55 to +125°C
■ Construction
Cover
Metal Rotor
Monolithic
Stator
24
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
■ Frequency Characteristics
TZW4Z1R5
TZW4Z1R5
Z1R5 (NP0±150 ppm/˚C)
Z1R5
+8
+6
+4
+2
1000
Temp. (˚C)
45
0
20
105
125
1.5pF set
65
−55
−25
−10
0
85
−2
100
−4
−6
−8
Q
−10
−12
10
1
500
1000
1500
2000
2500
3000
Frequency (MHz)
■ Land Pattern
7.0
4.4
Tolerance: ±0.1
in mm
6
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245±3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
25
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxie gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30
to 85%RH.
(2) In liquid (Ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty/dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)
1. Soldering
of the terminal may cause fixed metal rotor or
the contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(1) TZW4 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(3) The amount of solder is critical.
(b) String solder: 0.5wt% max.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
6
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breaking.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.1mm bore
diameter).
3. Cleaning
Cannot be cleaned because of open construction.
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
driver slot.
-Recommended screwdriver for manual adjustment
VESSEL: No.9000 -1.3x30
(Murata: KMDR130)
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
applied to the screwdriver slot, it may cause
deformation of the products.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
26
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZB4 Series
0.6±0.1 Depth 0.5
1.4±0.1 dia.
■ Features
1. Miniature rectangular shape:
4.0(W)x4.5(L)x3.0(H)mm
4.5±0.2
2. Color coded case facilitates identification of
capacitance range.
3. Designed for automatic placement in surface mount
applications.
2.7±0.3
1.2±0.1
4. Designed to withstand flux baths and solder baths
(with cover film type)
A Type
Tolerance: ±0.5
5. Can be temporarily attached to PCB with adhesives
(Terminal style A and B)
in mm
5.0
6. Can be reflow and flow (with cover film type)
soldering method
0.6±0.1 Depth 0.5
1.4±0.1 dia.
7. Stable characteristics over a wide frequency range
(Resonant frequency: 1000MHz min. / 6pF)
4.5±0.2
■ Applications
1. Car audio systems
2. Cordless telephones
4. Pagers
3. Hybrid ICs
5. Remote keyless entry systems
1.2±0.1
6. Tuner packs
8. DVDs
7. Surveillance cameras
9. Burglarproof devices
B Type
Tolerance: ±0.5
in mm
7.0
0.6±0.1 Depth 0.5
4.5±0.2
7.0
4.8
4.0±0.2
7
4.5
E Type
Tolerance: ±0.5
in mm
C min. (max.)
(pF)
C max.
(pF)
Rated Withstanding
Part Number
TC
Q
Stator/Case Color
Voltage
Voltage
TZB4Z030pp10
TZB4Z060pp10
TZB4Z100pp10
TZB4R200pp10
TZB4P300pp10
TZB4P400pp10
TZB4Z250pp10
TZB4R500pp10
1.4
2.0
3.0
4.5
6.5
8.5
4.0
7.0
3.0 +50/-0%
6.0 +50/-0%
NP0±200ppm/°C
NP0±200ppm/°C
NP0±300ppm/°C
N750±400ppm/°C
300min. at 1MHz, Cmax 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax 100Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
110Vdc
110Vdc
Brown
Blue
10.0 +50/-0%
20.0 +50/-0%
30.0 +50/-0%
40.0 +50/-0%
25.0 +100/-0%
50.0 +100/-0%
White
Red
N1200±500ppm/°C 300min. at 1MHz, Cmax 100Vdc
N1200±500ppm/°C 300min. at 1MHz, Cmax 100Vdc
Green
Yellow
NP0±300ppm/°C
N750±300ppm/°C
300min. at 1MHz, Cmax. 50Vdc
300min. at 1MHz, Cmax 50Vdc
Black+Marking
Black+Marking
Insulation Resistance: 10000M ohm Torque: 1.5 to 9.8mNm Operating Temperature Range: -25 to +85°C
First blank: Terminal Type Second blank: Cover film codes (A: not provided, B: provided)
ex. TZB4Z100AB10: Terminal Type is A, and Cover film is provided.
27
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Construction
Cover Film (Cover film type)
Rotor Spring
Plastic Case
−
Metal Rotor
Ceramic Plate
Stator Terminal
+
Rotor Terminal
■ Land Pattern/Mounting Holes
A Type
B Type
+0
- 0.5
+0
8.0
7.0
- 0.5
4.0±0.2
2.4±0.2
(in mm)
(in mm)
E Type
+0
- 0.5
8.0
4.2±0.2
7
3.2±0.2 dia.
(in mm)
■ Temperature Characteristics
TZB4Z060
TZB4Z100
Z060 (NP0±200ppm/°C)
Z100 (NP0±300ppm/°C)
+10
+8
+6
+4
+2
+10
+8
+6
+4
+2
+20
+55
+55
+85
Temp. (°C)
+20
+85
0
–2
0
–2
–25
Temp. (°C)
–25
0
0
–4
–6
–4
–6
–8
–8
–10
–10
Continued on the following page.
28
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Temperature Characteristics
TZB4R200
TZB4R500
R200 (N750±400ppm/°C)
R500 (N750±300ppm/°C)
+10
+8
+6
+4
+2
+10
+8
+6
+4
+2
+20
+85
+55
+20
+55
+85
0
–2
0
–2
Temp. (°C)
Temp.(°C)
0
–25
0
–25
–4
–6
–4
–6
–8
–8
–10
–10
■ Frequency Characteristics
TZB4Z060
TZB4Z100
Z060
Z100
1000
1000
1000
1000
100
Q
100
100
100
Q
10
10
10
10
1
1
100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
TZB4R200
TZB4R500
R500
R200
7
1000
1000
1000
1000
100
100
100
100
Q
Q
10
10
10
10
1
1
100
200
300
400
500
600
100
200
300
400
500
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
29
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Temperature Profile
Flow Soldering Profile
Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
Standard Profile
t2
Limit Profile
Pre-heating
Heating
Temp. (T2)
Cycle
T1
of reflow
Standard Profile
Temp. (T1)
Time (t1)
Time (t2)
150°C
60 to 120sec.
250°C
5sec. max.
1 time
t1
time (s)
Limit Profile
Pre-heating
Heating
• Immerse the body in solder bath, available for cover film type.
Cycle
of reflow
Temp. (T1)
Time (t1)
Temp. (T3)
Time (t2)
150°C
60 to 120sec.
265±3°C
5sec. max.
2 times
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
time (s)
t1
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245±3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Peak
temperature
(T5)
Pre-heating
Cycle
of reflow
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
• Available for terminal shape A, B, and E..
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
7
350±10°C
3sec. max.
30W max.
1 time
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
30
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Soldering and Mounting)
1. Soldering
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(1) Can be soldered by reflow soldering method, flow
soldering method, and soldering iron.
(2) Soldering condition
Refer to the temperature profile.
2. Mounting
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(1) Do not apply excessive force (preferably 5.0N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the terminals
or contact failure due to flux wicking up.
(5) When using soldering iron, the string solder
should be applied to the lower part of the
terminal only. Do not apply flux except to the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the
terminal may cause fixed rotor or contact failure
due to flux invasion into the movable part and/or
the contact point. The soldering iron should not
come in contact with the plastic case of the
trimmer capacitor. If such contact does occur,
the trimmer capacitor may be damaged.
(6) Our recommended chlorine content of solder is
as follows.
(3) In case of bending the terminals, do not apply
excessive force to the body of the product and
prevent the terminal fixing part from damaging.
(4) Use the suitable dimension of the pick-up nozzle.
> Without cover film type
- External dimensions of 4.5x4.0mm and
2.5mm bore diameter.
> With cover film type
- 4.0mm external diameter and 2.0mm bore
diameter.
3. Cleaning [with cover film type]
Isopropyl alcohol and Ethyl alcohol are available
material for cleaning. If you use any other types
of solvents, please evaluate performance by
your set. Moreover, please confirm no damage for
trimmer capacitor after cleaning by your conditions.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
driver slot.
7
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
4. Do not break the cover film before the completion
of PCB mounting, soldering, and cleaning.
5. Do not clean the trimmer capacitor after the cover
film has been broken.
MURATA: KMBT010
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
6. To break the cover film, first turn the screwdriver
more than 360 deg., and set the capacitance value.
(Only inserting the screwdriver cannot break the
cover film.)
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
31
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZ03 Series
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
■ Features
1. Color coded case facilitates identification of
capacitance range.
2. Sealed construction prevents the penetration of
6
flux and dust.
3. Available in two adjustment styles: Top/Rear.
4. + (Cross-shaped) slot enables automatic adjustment.
1.0±0.1
1.0±0.1
■ Applications
1. Car audio systems
3. Stereos
F Type
6.6
Tolerance: ±0.5
2. Car clocks
in mm
4. Radio cassette tape recorders
5. Cordless telephones 6. Video games
7. Compact radio equipment
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
8. Remote keyless entry systems
9. Burglarproof devices
6.0
7.8
6.4
1.2±0.1
1.0±0.1
3.0
3.4
N Type
Tolerance: ±0.5
in mm
C min. (max.)
(pF)
C max.
(pF)
Rated Withstanding
Part Number
TC
Q
Stator/Case Color
Voltage
Voltage
TZ03Z2R3p169
TZ03Z050p169
TZ03Z070p169
TZ03Z100p169
TZ03R200p169
TZ03R300p169
TZ03P450p169
TZ03P600p169
TZ03Z500p169
TZ03R900p169
TZ03R121p169
1.25
1.5
2.0
2.7
4.2
5.2
6.8
9.8
6.0
9.0
10.0
2.3 +50/-0%
5.0 +50/-0%
NP0±200ppm/°C
NP0±200ppm/°C
NP0±200ppm/°C
NP0±200ppm/°C
N750±300ppm/°C
N750±300ppm/°C
300min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
500min. at 1MHz, Cmax. 100Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
110Vdc
110Vdc
110Vdc
Black
Blue
7.0 +50/-0%
Blue
10.0 +50/-0%
20.0 +50/-0%
30.0 +50/-0%
45.0 +50/-0%
60.0 +50/-0%
50.0 +100/-0%
90.0 +100/-0%
Blue
Red
Green
Yellow
Brown
Orange
Black+Dot
Black
N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc
N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc
NP0±300ppm/°C
N750±300ppm/°C
300min. at 1MHz, Cmax. 50Vdc
300min. at 1MHz, Cmax. 50Vdc
300min. at 1MHz, Cmax. 50Vdc
120.0 +100/-0% N750±300ppm/°C
8
Insulation Resistance: 10000M ohm Torque: 2.0 to 14.7mNm Operating Temperature Range: -25 to +85°C
A blank column is filled with terminal type codes.
32
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Construction
■ Mounting Holes
F Type
N Type
3 dia.
1.1±0.1
3
3.3
5
Tolerance: ±0.5
in mm
Tolerance: ±0.5
(
)
in mm
■ Temperature Characteristics
TZ03Z070
TZ03R200
Z070 (NP0±200ppm/°C)
R200 (N750±300ppm/°C)
+6
+6
+4
+2
+4
+2
85
55
55
85
20
20
0
–25
0
Temp. (°C)
0
0
–2
–25
–2
Temp. (°C)
–4
–6
–4
–6
8
TZ03P600
TZ03Z500
P600 (N1200±500ppm/°C)
Z500 (NP0±300ppm/°C)
+8
+8
+6
+4
+6
+4
+2
+2
55
20
85
20
55
85
0
0
–2
0
0
–25
–25
Temp. (°C)
Temp. (°C)
–2
–4
–4
–6
–6
–8
–8
–10
–10
Continued on the following page.
33
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Temperature Characteristics
TZ03R121
R121 (N750±300ppm/°C)
+8
+6
+4
+2
55
85
20
0
–2
–25
0
Temp. (°C)
–4
–6
–8
–10
■ Frequency Characteristics
TZ03Z070
TZ03R200
R200
Z070
1000
100
10
1000
100
10
1000
1000
100
100
Q
Q
10
10
1
100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
1
100
200
300
400
500
Frequency (MHz)
TZ03P450
TZ03P600
P600
P450
1000
1000
1000
100
10
1000
100
100
100
8
Q
Q
10
10
10
1
100
200
300
400
500
1
100
200
300
400
500
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
34
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZ03R900
R900
1000
1000
100
10
100
Q
10
1
100
200
300
400
500
Frequency (MHz)
■ Temperature Profile
Flow Soldering Profile
Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
Standard Profile
Heating
t2
Limit Profile
Pre-heating
Cycle
Heating
T1
of reflow
Standard Profile
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
150°C
60 to 120sec.
250°C
5sec. max.
1 time
t1
time (s)
Pre-heating
Limit Profile
Pre-heating
Heating
Cycle
of reflow
Temp. (T1)
Time (t1)
Temp. (T3)
Time (t2)
150°C
60 to 120sec.
265±3°C
5sec. max.
2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
8. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
8
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Open the package just before using.
6. Prior to storing previously opened packages, the
packaging should be heat-sealed. Avoid using
rubber bands for repackaging.
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
7. Do not store under direct sunlight.
35
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Soldering and Mounting)
1. Soldering
2. Mounting
(1) TZ03 series can be soldered by flow soldering
method and soldering iron. Do not use reflow
soldering method.
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Soldering condition
(2) Use the suitable PCB holes which are the same
pitch as the terminal of the trimmer capacitor.
If it would not fit with the terminal, the
excessive stress would be applied to the
terminal and the trimmer capacitor may deviate
from the specified characteristics.
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer capacitor may deviate from the
specified characteristics.
(3) The dimension of mounting hole should be Murata's
standard mounting hole used at flow soldering.
The amount of solder is critical. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the terminals
or contact failure due to flux wicking up.
(4) When using soldering iron, the string solder
should be applied to the lower part of the
terminal only. Do not apply flux except to the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the
terminal may cause fixed rotor or the contact
failure due to flux invasion into the movable
part and/or the contact point. The soldering
iron should not come in contact with the plastic
case of the trimmer capacitor. If such contact
does occur, the trimmer capacitor may be damaged.
(5) Our recommended chlorine content of string
solder is 0.5wt% max.
(3) Do not apply bending stress more than 10.0N
(Ref: 1kgf) after the trimmer capacitor has
been mounted on the PCB.
(4) Mount trimmer capacitor in contact with PCB.
(5) In case of bending the terminals, do not apply
excessive force to the body of the product and
prevent the terminal fixing part from damaging.
3. Cleaning
Isopropyl alcohol and Ethyl alcohol are available
material for cleaning. If you use any other types
of solvents, please evaluate performance by
your set. Moreover, please confirm no damage for
trimmer capacitor after cleaning by your conditions.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
(6) Do not use water-soluble flux (for water cleaning).
To prevent the deterioration of trimmer
capacitor characteristics, apply flux only to
terminals.
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
MURATA: KMBT010
8
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
36
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
■ Minimum Quantity
Minimum Quantity (pcs.)
Part Number
φ180mm Reel
3000
3000
2000
2000
1000
500
φ330mm Reel
Bulk
500
500
500
500
500
100
500
1000
-
TZR1
TZS2
TZY2
TZV2
TZC3
TZW4
TZB4
TZ03
-
-
-
-
-
2500
-
500
-
■ Dimension of Tape
TZR1 Series
TZS2 Series
2.0±0.1
4.0±0.1
2.0±0.1
4.0±0.1
1.05±0.2
0.25±0.1
1.25±0.2
0.25±0.1
4.0±0.1
4.0±0.1
+0.1
1.5 -0 dia.
+0.1
-0
1.5
Dia.
1.8±0.2
2.5±0.2
(in mm)
(in mm)
TZY2/TZV2 Series
TZC3 Series
+0.1
− 0
1.5
A
dia.
+0.1
dia.
1.5
2.0
4.0
t
2.0±0.2
0.3
− 0
0.25
2
4
A
A-Across
section
A
A-Across
section
A
3.6±0.2
8
2.7±0.2
t=TZY2 (TZVY2) : 1.6±0.2
TZV2 (TZV02) : 1.9±0.2
4.0
Tolerance : ±0.1
in mm
Tolerance: ±0.1
in mm
8
TZW4 Series
TZB4 Series
+0.1
− 0
1.5
dia.
+0.1
− 0
1.5
dia.
3.55±0.2
2.6
2.0
8.0
4 .0
0.3±0.1
2
4
0.3
A
A
A
A-Across
section
4.6
8
1.8
4.3
A-Across
section
A
Direction of feed
Tolerance: ±0.1
in mm
Tolerance: ±0.1
in mm
37
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
■ Dimension of dia. 178mm Reel
TZR1/TZS2/TZY2/TZV2 Series
TZC3/TZW4/TZB4 Series
13.0±0.5 Dia.
21.0±0.8 Dia.
13.0±0.5 Dia.
21.0±0.8 Dia.
2.0±0.5
2.0±0.5
9.0±1.0
13.0±1.0
17.0±1.0
13.0±1.0
178±2 Dia.
178±2 Dia.
(in mm)
(in mm)
■ Dimension of dia. 330mm Reel
TZB4 Series
13.0±0.5 dia.
2.0±0.5
21.0±0.8 dia.
13.5±1.0
17.5±1.0
328±2 dia.
(in mm)
8
38
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Recommended Adjustment Tools
Please use the following recommended screwdriver.
You can order this driver with part number below.
Though you can also adjust the capacitance value by commercial products, please use one which has the same head size as
the driver below.
■ For Manual Adjustment
MURATA
Model Number
Manufacturers
Model Number
Series
Shape
80
1.5
MURATA MFG.
TZR1
TZS2
TZY2
TZV2
TZC3
TZW4
KMDR160
KMDR050
KMDR060
KMDR020
KMDR010
KMDR130
KMDR010
KMDR160
Bit shape:
Minus (0.3×0.13)
(in mm)
(in mm)
(in mm)
(in mm)
(in mm)
80
1.5
MURATA MFG.
KMDR050
Bit shape: Square (0.54×0.54)
108
18
ENGINEER INC.
DA-89
Bit shape: Minus (0.8×0.35)
125
15
9 0 0 0
VESSEL MFG.
0.9-30
NO.9000 -0.9g30
Bit shape: Minus (0.9×0.4)
122
50
20
MURATA MFG.
KMDR010
Bit shape: Minus (2.2×0.4)
125
15
VESSEL MFG.
CERAMIC BLADE
ELECTRONICS
9 0 0 0
1.3-30
NO.9000 -1.3g30
8
Bit shape: Minus (1.3×30)
(in mm)
122
50
20
TZB4
TZ03
MURATA MFG.
KMDR010
Bit shape: Minus (2.2×0.4)
(in mm)
Continued on the following page.
39
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Recommended Adjustment Tools
Continued from the preceding page.
■ For Automatic Adjustment
MURATA
Model Number
Manufacturers
Model Number
Series
Shape
20
2
MURATA MFG.
TZS2
TZY2
TZV2
KMBT050
KMBT060
KMBT020
KMBT010
KMBT050
Bit shape: Square (0.54×0.54)
(in mm)
(in mm)
(in mm)
(in mm)
25
0.6
MURATA MFG.
KMBT060
Bit shape: Minus (0.56 ×0.25)
25
0.6
MURATA MFG.
KMBT020
Bit shape: Minus (0.9×0.4)
30
TZC3
TZB4
TZ03
MURATA MFG.
KMBT010
Bit shape: Minus (2.2×0.4)
8
40
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
T13E.pdf
sales representatives or product engineers before ordering.
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Qualified Standards
The products listed herein have been produced
by the QS9000 and ISO9001 certified factory
MURATA FACTORY
Sabae Murata Mfg. Co., Ltd.
No ODCs (Ozone Depleting Chemicals) are used on
any Murata trimmer potentiometers.
41
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
!Note
T13E.pdf
08.8.27
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
相关型号:
TZY2R200A001A00
Ceramic Trimmer CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R200A001B00
New shape of cover can improve the flux invasion compared with current productsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R200A001R00
New shape of cover can improve the flux invasion compared with current productsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R200AC01
Ceramic Trimmer CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R200AC01B00
New shape of cover can improve the flux invasion compared with current productsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R200AC01R00
Ceramic Trimmer CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R200B001A00
Ceramic Trimmer CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R200C001A00
Ceramic Trimmer CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R250A001
Ceramic Trimmer CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R250A001B00
New shape of cover can improve the flux invasion compared with current productsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R250A001R00
New shape of cover can improve the flux invasion compared with current productsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
TZY2R250AC01
Ceramic Trimmer CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MURATA
©2020 ICPDF网 联系我们和版权申明