TZY2Z060AC01 [MURATA]
Ceramic Trimmer Capacitors;
| 型号： | TZY2Z060AC01 |
| 厂家： | 
muRata |
| 描述： | Ceramic Trimmer Capacitors |
| 文件： | 总32页 (文件大小：639K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ceramic Trimmer Capacitors
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
EU RoHS Compliant
s
!LL THE PRODUCTS IN THIS CATALOG COMPLY WITH %5 2O(3ꢀ
%5 2O(3 IS ꢁTHE %UROPEAN $IRECTIVE ꢂꢃꢄꢄꢅꢆꢇꢅ%5 ON THE 2ESTRICTION OF THE 5SE
s
OF #ERTAIN (AZARDOUS 3UBSTANCES IN %LECTRICAL AND %LECTRONIC %QUIPMENTꢀꢁ
For MORE DETAILSꢈ PLEASE REFEr To Our WEBSITE 'MurATAgS APProAcH FoR %5 2O(3'
ꢉHTTPꢊꢅꢅWWWꢀMURATAꢀCOMꢅENꢋEUꢅSUPPORTꢅCOMPLIANCEꢅROHSꢌꢀ
s
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
1
Part Numbering
p2
p3
Contents
Selection Guide of Ceramic Trimmer Capacitors
Product specifications are as of May 2014.
1
2
3
4
5
TZR1 Series
p4
p8
Bluetoothr is a registered trademark
or trademark of Bluetooth SIG, Inc.
in the United States and other countries.
2
TZY2 Series
3
TZC3 Series
p13
p18
p21
4
TZW4 Series
5
TZB4 Series
Packaging
p26
p28
p29
Recommended Adjustment Tools
Qualified Standards
Please check the MURATA home page (http://www.murata.com/)
if you cannot find the part number in the catalog.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
o Part Numbering
Ceramic Trimmer Capacitors
(Part Number)
TZ Y2
R
200
A
C01 R00
q
w
e
r
t
y
u
qProduct ID
tTerminal Shape
Product ID
Code
A
Terminal Shape
Top Adjustment: TZR1, TZY2, TZC3, TZW4, TZB4
Top Adjustment: TZB4
TZ
Trimmer Capacitors
B
wSeries/Terminal
Please refer to dimensions for terminal details.
Code
B4
Series/Terminal
yIndividual Specifications
4mm Size SMD Type
4mm Size SMD Type
3mm Size SMD Type
2mm Size SMD Type
1mm Size SMD Type
W4
C3
Code
001
Individual Specifications
TZR1, TZW4 Standard Type
TZY2 Standard Type
Y2
C01
110
R1
TZC3 Standard Type
A10
B10
TZB4 No-cover Film Standard Type
TZB4 with Cover Film Standard Type
eTemperature Characteristics
Code
Temperature Characteristics
NP0ppm/°C
uPackaging
Z
R
K
P
N750ppm/°C
Code
B00
Packaging
Bulk
N1000ppm/°C
N1200ppm/°C
R00
Reel (Taping ø180mm)
Reel (Taping ø330mm)
Please refer to ratings for tolerance of temperature characteristics.
R01*
* TZB4 only.
rMaximum Capacitance
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
numbers. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Selection Guide of Ceramic Trimmer Capacitors
Mounting Method?
Surface Mount
Reflow
Flow
Height 0.90mm max.
Height 1.7mm max.
Height 3.2mm max.
High Frequency Power
TZB4_AB
TZR1
TZC3
Height 2.6mm max.
4.0(W) x 4.5(L)
(with cover film)
1.5(W) x 1.7(L)
3.2(W) x 4.5(L)
TZW4
Height 1.25mm max.
Height 3.2mm max.
4.2(W) x 5.2(L)
TZB4_BB
4.0(W) x 4.5(L)
(with cover film)
TZY2
TZB4_AA
2.5(W) x 3.2(L)
4.0(W) x 4.5(L)
TZB4_BB
4.0(W) x 4.5(L)
All Ceramic Trimmer Capacitor products comply with RoHS and ELV.
3
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.
!Note
T1±E.ꢀdf
Mar.12,2015
1
Ceramic Trimmer Capacitors
TZR1 Series
1.7
(Depth;0.15)
Features
0.2
c
1. Ultra-spall and thin with external dipensions
of 1.5(W)x1.7(L)x0.85(H)pp
(80% less in volupe than the current ꢀroduct).
2. Unique construction with no ꢀlastic paterial
ꢀrovides suꢀerior soldering heat resistance to
paintain excellent characteristic ꢀerforpance
after reflow soldering.
0.35
±. Suitable for high frequency circuit due to high
self-resonant frequency (6.2GHz of TZR1Z010 at
1.0ꢀF setting).
Tolerance: 0.1
in mm
(
)
Applications
c
1. Bluetoothr
2. °rystal oscillators
±. °rystal filters
4. Hand radios
5. Miniature tuner ꢀacks (FM Radio, TV)
6. Repote keyless entry systeps
C min. (max.)
(pF)
C max.
(pF)
Part Number
TC
Q
Rated Voltage
Withstanding Voltage
TZR1Z010A001
TZR1Z1R5A001
TZR1Z040A001
TZR1R080A001
0.55
0.7
1.5
±.0
1.0 +100/-0%
1.5 +100/-0%
NP0±±00ꢀꢀp/ꢁ°
NP0±±00ꢀꢀp/ꢁ°
NP0±500ꢀꢀp/ꢁ°
N750±500ꢀꢀp/ꢁ°
200pin. at 200MHz, °pax.
200pin. at 200MHz, °pax.
±00pin. at 1MHz, °pax.
±00pin. at 1MHz, °pax.
25Vdc
25Vdc
25Vdc
25Vdc
55Vdc
55Vdc
55Vdc
55Vdc
4.0 +100/-0%
8.0 +100/-0%
Insulation Resistance: 10000M ohp
Torque: 0.1 to 1.0pNp
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°
Construction
c
Cover
Metal Rotor
Monolithic
Stator
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Temperature Characteristics
c
1
TZR1Z010
TZR1Z1R5
Z010 (NP0±±00 ꢀꢀpm/Cꢁ
Z1R5 (NP0±±00 ꢀꢀpm/Cꢁ
8
6
4
2
8
6
4
2
–25
20
85
Tepꢀ.(/Cꢁ
–25
20
85
Tepꢀ.(/Cꢁ
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
TZR1Z040
TZR1R080
Z040 (NP0±500 ꢀꢀpm/Cꢁ
R080 (N750±500 ꢀꢀpm/Cꢁ
8
6
4
8
6
4
2
2
–25
20
85
Tepꢀ.(/Cꢁ
–25
20
85
Tepꢀ.(/Cꢁ
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
Frequency Characteristics
c
TZR1Z010
TZR1Z1R5
Z010
Z1R5
10000
10000
1000
100
1000
100
0.55ꢀF set
0.7ꢀF set
Q
Q
10
1
10
1
1.0ꢀF set
1.5ꢀF set
0
0
0
2
4
6
8
10
0
2
4
6
8
10
Frequency (GHzꢁ
Frequency (GHzꢁ
TZR1Z040
TZR1R080
Z040
R080
1000
1000
100
1000
100
1000
100
100
10
1
Q
Q
10
10
1
10
500 1000 1500 2000 2500
Frequency (MHzꢁ
500
1000
Frequency (MHzꢁ
1500
2000
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Land Pattern
c
1
2.2
1.2
Tolerance: 0.1
in mm
Temperature Profile
c
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
t2
T1
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245 3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Soldering Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of soldering iron
350 10°C
3sec. max.
30W max.
1 time
Notice (Storage and Operating Conditions)
c
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitors, please store under
the conditions of -10 to +40°C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Notice (Soldering and Mounting)
1. Soldering
(1) TZR1 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
c
1
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(2) Soldering conditions
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
(2) Do not warp and/or bend PCB to protect trimmer
capacitor from breaking.
(3) Use a pick-up nozzle of a suitable dimension.
(1.6mm external diameter and 0.8mm bore
diameter.)
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
3. Cleaning
This product cannot be cleaned because of open
construction.
(5) When using soldering iron, the diameter of the
string solder shall be less than 0.5mm. The
string solder shall be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
driver slot.
*Recommended screwdriver for manual adjustment
MURATA: KMDR160
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 0.5 N [Ref: 50gf] max.)
to minimize capacitance drift. Excessive force applied
to the screwdriver slot may cause deformation of the
products.
Notice (Other)
c
Before using trimmer capacitors, please test after
assembly in your particular mass production system.
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T1±E.pdf
Mar.12,2015
Ceramic Trimmer Capacitors
TZY2 Series
3.2±±.2
±.45
2
c Features
1. Small and thin size with external dimensions
of 2.5(W)x±.2(L)x1.25max.(H)mm.
2. New shape of cover can improve the flux invasion
compared with current products.
±. Improvement of the adhesion between rotor and
stator leads to superior stability.
±.5
4. Unique construction with no plastic material
provides superior soldering heat resistance to
maintain excellent characteristic performance
after reflow soldering.
Tolerance: ±±.1
in mm
(
)
5. Suitable for high frequency circuit due to high
self-resonant frequency (4.8GHz of TZY2Z010 at
1.0pF setting).
Applications
c
1. Crystal oscillators
2. Crystal filters
±. Stylus pen
9. Remote keyless entry systems
10. W-LAN
11. Radar detectors
4. Cordless telephones 12. Compact radios
5. PHS
1±. DVD
6. Hand radios
7. Cellular telephones
8. Watches
14. Burglarproof devices
15. Headphone stereos
C min. (max.)
C max.
(pF)
Part Number
TC
Q
Rated Voltage Withstanding Voltage
(pF)
TZY2Z010AC01
TZY2Z2R5AC01
TZY2Z030AC01
TZY2Z060AC01
TZY2Z100AC01
TZY2R200AC01
TZY2R250AC01
TZY2K450AC01
0.6
1.0
1.5
2.5
±.0
4.5
5.5
8.0
1.0 +100/-0%
2.5 +100/-0%
NP0±±00ppm/°C
NP0±±00ppm/°C
NP0±±00ppm/°C
NP0±±00ppm/°C
NP0±±00ppm/°C
N750±500ppm/°C
N750±500ppm/°C
N1000±500ppm/°C
200min. at 200MHz, Cmax.
200min. at 200MHz, Cmax.
±00min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
500min. at 1MHz, Cmax.
±00min. at 1MHz, Cmax.
±00min. at 1MHz, Cmax.
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
55Vdc
±.0 +100/-0%
6.0 +100/-0%
10.0 +100/-0%
20.0 +100/-0%
25.0 +100/-0%
45.0 +100/-0%
Torque: 0.7 to 4.9mNm
Insulation Resistance: 10000M ohm
Operating Temperature Range: -25 to +85°C
Construction
c
Cover
Metal Rotor
Monolithic
Stator
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Temperature Characteristics
c
TZY2Z010
TZY2Z2R5
Z010 (NP0±±00 ꢀꢀpm/Cꢁ
Z2R5 (NP0±±00 ꢀꢀpm/Cꢁ
8
6
4
2
8
6
4
2
–25
–25
–25
20
85
Tepꢀ.(/Cꢁ
–25
20
85
Tepꢀ.(/Cꢁ
2
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
TZY2Z030
TZY2Z060
Z0±0 (NP0±±00 ꢀꢀpm/Cꢁ
Z060 (NP0±±00 ꢀꢀpm/Cꢁ
8
6
4
8
6
4
2
2
20
85
Tepꢀ.(/Cꢁ
–25
20
85
Tepꢀ.(/Cꢁ
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
TZY2Z100
TZY2R200
Z100 (NP0±±00 ꢀꢀpm/Cꢁ
R200 (N750±500 ꢀꢀpm/Cꢁ
8
6
4
8
6
4
2
2
20
85
Tepꢀ.(/Cꢁ
–25
20
85
Tepꢀ.(/Cꢁ
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
TZY2R250
TZY2K450
R250 (N750±500 ꢀꢀpm/Cꢁ
K450 (N1000±500 ꢀꢀpm/Cꢁ
8
6
4
8
6
4
2
2
–25
20
85
Tepꢀ.(/Cꢁ
–25
20
85
Tepꢀ.(/Cꢁ
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Frequency Characteristics
c
TZY2Z010
TZY2Z100
Z010
Z100
1000
1000
1000
2
100
100
100
Q
Q
0.5pF set
10
10
10
1.0pF set
1
1
0
2
4
6
8
200
400
600
800
1000
Frequency (GHz)
Frequency (MHz)
TZY2R200
TZY2K450
R200
K450
1000
1000
1000
1000
100
10
1
100
100
100
Q
Q
10
10
10
1
200
400
600
800
1000
200
400
600
800
Frequency (MHz)
Frequency (MHz)
Land Pattern
c
4.0
2.4
Tolerance: 0.1
in mm
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Temperature Profile
c
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
t2
T1
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
2
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245 3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Soldering Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of soldering iron
350 10°C
3sec. max.
30W max.
1 time
Notice (Storage and Operating Conditions)
c
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitors, please store under
the conditions of -10 to +40°C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Notice (Soldering and Mounting)
c
1. Soldering
(6) Our recommended chlorine content of solder is
as follows.
(1) TZY2 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(2) Soldering conditions
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
2
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 120 micro m to 170 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
(2) Do not warp and/or bend PCB to protect trimmer
capacitor from breakage.
(3) Use a pick-up nozzle of a suitable dimension.
(2.5mm external diameter and 1.2mm bore
diameter.)
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
3. Cleaning
This product cannot be cleaned because of open
construction.
(5) When using soldering iron, the diameter of the
string solder shall be less than 0.5mm. The
string solder shall be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. Excessive force applied
to the screwdriver slot may cause deformation of the
products.
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR060
(2) Recommended screwdriver bit for automatic
adjustment
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
MURATA: KMBT060
Notice (Other)
c
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
12
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.
!Note
T13E.ꢀdf
Mar.12,2015
Ceramic Trimmer Capacitors
TZC3 Series
Features
c
1. Spall size with external dipension of
±05
205 dia0
405
3.2(W)x4.5(L)x1.6(H)pp.
2. °olor coded stator ꢀerpits easy identification of
caꢀacitance and reduces pounting errors.
3. °an be adjusted with conventional adjustpent tools
having a thickness of 0.5pp.
3
4. Designed for autopatic ꢀlacepent in surface pount
aꢀꢀlications.
Tolerance: ±±0.
in mm
5. Heat resistant resin withstands reflow soldering
tepꢀeratures.
±06
±06
Applications
c
1. °opꢀact radios
2. Headꢀhones
3. Stylus ꢀen
4. Portable radio equiꢀpent
5. Hybrid I°s
6. °ellular teleꢀhones
7. °ordless teleꢀhones
8. Repote keyless entry systeps
C min. (max.)
(pF)
C max.
(pF)
Part Number
TC
Q
Rated Voltage Withstanding Voltage Stator/Case Color
TZC3Z030A110
TZC3Z060A110
TZC3R100A110
TZC3P200A110
TZC3P300A110
1.4
2.0
3.0
5.0
6.5
3.0 +50/-0% NP0 300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.
6.0 +50/-0% NP0 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.
10.0 +50/-0% N750 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.
20.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.
30.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
220Vdc
220Vdc
220Vdc
220Vdc
220Vdc
Brown
Blue
White
Red
Green
Insulation Resistance: 10000M ohp
Torque: 1.5 to 9.8pNp
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°
Construction
c
Center axis
Rotor spring terminal
Ceramic plate
Stator
(One molded injection
with stator terminal)
Stator terminal
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Temperature Characteristics
c
TZC3Z030
TZC3Z060
Z030 (NP0 300 ppmꢀ/C)
Z060 (NP0 300 ppmꢀ/C)
8
6
4
2
8
6
4
2
–25
–25
–25
20
85
Temp.(/C)
–25
20
85
Temp.(/C)
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
3
TZC3R100
TZC3P200
R100 (N750 300 ppmꢀ/C)
P200 (N1200 500 ppmꢀ/C)
8
6
4
8
6
4
2
2
20
85
Temp.(/C)
–25
20
85
Temp.(/C)
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
TZC3P300
P300 (N1200 500 ppmꢀ/C)
8
6
4
2
20
85
Temp.(/C)
–2
–4
–6
–8
–10
–12
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Frequency Characteristics
c
TZC3Z030
TZC3Z060
Z030
Z060
1000
1000
1000
1000
100
100
Q
100
100
Q
10
10
10
10
3
1
1
100
500
1000
1500
2000
100
500
1000
1500
2000
Frequency (MHz)
Frequency (MHz)
TZC3R100
TZC3P200
R100
P200
1000
1000
100
10
1000
1000
Q
Q
100
100
100
10
10
10
1
1
200
400
600
800
1000
200
400
600
800
1000
Frequency (MHz)
Frequency (MHz)
Land Pattern
c
+0
5.0
–0.5
3.3 0.1
Tolerance: 0.1
in mm
15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Temperature Profile
c
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
t2
T1
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245 3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
3
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Soldering Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of soldering iron
350 10°C
3sec. max.
30W max.
1 time
Notice (Storage and Operating Conditions)
c
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitors, please store under
the conditions of -10 to +40°C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Notice (Soldering and Mounting)
c
1. Soldering
(6) Our recommended chlorine content of solder is
as follows.
(1) TZC3 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(2) Soldering conditions
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(8) When soldering the TZC3 series, the solder
should not flow into the staking part of the
substrate. If such flow does occur, driver slot
rotation will be damaged.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
2. Mounting
3
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(2) Do not warp and/or bend PCB to protect trimmer
capacitor from breakage.
(3) Use a pick-up nozzle of a suitable dimension.
(2.5mm external diameter and 1.5mm bore
diameter.)
(5) When using soldering iron, the diameter of the
string solder shall be less than 0.5mm. The
string solder shall be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into the
movable part and/or the contact point. The
soldering iron should not come in contact with
the stator of the trimmer capacitor. If such
contact does occur, the trimmer capacitor may
be damaged.
3. Cleaning
This product cannot be cleaned because of open
construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
driver slot.
(1) Recommended screwdriver for manual adjustment
Standard type --> MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
Standard type --> MURATA: KMBT010
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. Excessive force applied
to the screwdriver slot may cause deformation of the
products.
Notice (Other)
c
Before using trimmer capacitors, please test after
assembly in your particular mass production system.
17
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.
!Note
T13E.ꢀdf
Mar.12,2015
Ceramic Trimmer Capacitors
TZW4 Series
5.2±±.2
ꢀ.6
±.4 Depth
Features
c
1. To peet high ꢀower aꢀꢀlication due to withstanding
voltage 550Vdc.
2. Extrepely high self-resonant frequency.
(More than 3GHz at rated ° pax.)
3. Tyꢀical aꢀꢀlication: Ipꢀedance patching for °ellular
Base Station.
3.±
2.2
4. High Q value in pore than VHF, UHF and Microwave
bands.
(More than 200 in 500MHz, ° pax.)
5. Available for ꢀick and ꢀlace pachine. Possible
thinner design due to 2.6pp low ꢀrofile.
6. Non-electrical contact construction
(rotor as piddle electrode) ꢀrovides high reliability.
7. °opꢀact size: 4.2(W)x5.2(L)x2.6pax.(H)pp.
+±.ꢀ
Tolerance: ±±.ꢀ
±.3
-±.2
(
)
in mm
4
Applications
c
1. Transpitting ꢀower apꢀlifier for °ellular base station
2. Transpitting apꢀlifier for PHS base station
3. High frequency electric circuit
4. High ꢀower radio transpission
5. Transꢀonder apꢀlifier for cable TV
C min. (max.)
(pF)
C max.
(pF)
Part Number
TC
Q
Rated Voltage
Withstanding Voltage
TZW4Z010A001
0.4
0.4
1.0 +50/-0%
NP0 150ꢀꢀp/ꢁ°
NP0 150ꢀꢀp/ꢁ°
200pin. at 500MHz, °pax.
200pin. at 500MHz, °pax.
250Vdc
250Vdc
550Vdc
550Vdc
TZW4Z1R5A001
1.5 +100/-0%
Insulation Resistance: 10000M ohp
Torque: 1.5 to 10.0pNp
Oꢀerating Tepꢀerature Range: -55 to +125ꢁ°
Construction
c
Cover
Metal Rotor
Monolithic
Stator
18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Temperature Characteristics
c
TZW4Z010
TZW4Z1R5
Z010 (NP0±150 ꢀꢀpm/Cꢁ
Z1R5 (NP0±±00 ꢀꢀpm/Cꢁ
8
6
4
2
8
6
4
2
–55
20
125
Tepꢀ.(/Cꢁ
–55
20
125
Tepꢀ.(/Cꢁ
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
Frequency Characteristics
Land Pattern
c
c
TZW4Z1R5
Z1R5
7.0
4.4
1000
4
1.5ꢀF set
100
Q
Tolerance: ±0.1
in pp
10
1
500
1000
1500
2000
2500
±000
Frequency (MHzꢁ
Temperature Profile
c
Reflow Soldering Profile
qSoldering ꢀrofile for Lead-free solder (96.5Snm±Agm0.5Cuꢁ
wSoldering ꢀrofile for Eutectic solder (6±Snm±7Pbꢁ
(Lipit ꢀrofile: refer to qꢁ
T5
T±
T4
T2
T±
T2
t2
T1
t2
t±
Lipit Profile
T1
Standard Profile
Standard Profile
t1
t1
tipe (sꢁ
tipe (sꢁ
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180/C 60 to 120sec. 220/C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
±0 to 60sec. 245±±/C
2 tipes
150/C 60 to 120sec. 18±/C
±0sec. 2±0 +5m-0/C 1 tipe
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180/C 60 to 120sec. 2±0/C
±0 to 50sec. 260 +5m-0/C 2 tipes
Soldering Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of soldering iron
±50±10/C
±sec. pax.
±0W pax.
1 tipe
19
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Notice (Storage and Operating Conditions)
c
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitors, please store under
the conditions of -10 to +40°C and 30
to 85%RH.
(2) In liquid (Ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty/dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Soldering and Mounting)
c
1. Soldering
the contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(1) TZW4 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
4
(2) Soldering conditions
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(3) The amount of solder is critical.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
2. Mounting
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to protect trimmer
capacitor from breaking.
(5) When using soldering iron, the diameter of the
string solder shall be less than 0.5mm. The
string solder shall be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
(3) Use a pick-up nozzle of a suitable dimension.
(4.0mm external diameter and 1.2mm bore
diameter.)
3. Cleaning
This product cannot be cleaned because of open
construction.
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
driver slot.
-Recommended screwdriver for manual adjustment
VESSEL : No.9000 -1.3x30
(Murata P/N is KMDR130)
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. Excessive force applied
to the screwdriver slot may cause deformation of the
products.
Notice (Other)
c
Before using trimmer capacitors, please test after
assembly in your particular mass production system.
20
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.
!Note
T13E.ꢀdf
Mar.1±,±015
Ceramic Trimmer Capacitors
TZB4 Series
0.6 0.ꢀ1 Dept10.ꢁ
ꢀ.4 0.ꢀ1ꢂdi.
Features
c
1. Miniature rectangular shaꢀe:
4.0(W)x4.5(L)x3.0(H)pp.
4.ꢁ 0.2
±. °olor coded case facilitates identification of
caꢀacitance range.
3. Designed for autopatic ꢀlacepent in surface pount
aꢀꢀlications.
2.7 0.ꢃ
ꢀ.2 0.ꢀ
4. Designed to withstand flux baths and solder baths
(with cover filp tyꢀe).
A Type
TolDrincD:1 0.ꢁ
dn1mm
5. °an be tepꢀorarily attached to P°B with adhesives
(Terpinal style A and B).
ꢁ.0
6. °an be reflow and flow (with cover filp tyꢀe)
soldering pethod.
0.6 0.ꢀ1 Dept10.ꢁ
ꢀ.4 0.ꢀ1ꢂdi.
7. Stable characteristics over a wide frequency range.
(Resonant frequency: 1000MHz pin. / 6ꢀF)
4.ꢁ 0.2
Applications
c
1. °ar audio systeps
±. °ordless teleꢀhones
3. Hybrid I°s
5
ꢀ.2 0.ꢀ
4. Repote keyless entry systeps
5. Tuner ꢀacks
B Type
TolDrincD:1 0.ꢁ
dn1mm
6. Surveillance caperas
7. DVD
7.0
8. Burglarꢀroof devices
9. Entry ꢀhone
C min. (max.)
(pF)
C max.
(pF)
Part Number
TC
Q
Rated Voltage Withstanding Voltage Stator/Case Color
TZB4Z030
TZB4Z060
TZB4Z100
10
10
10
1.4
±.0
3.0
4.5
6.5
8.5
4.0
7.0
3.0 +50/-0%
6.0 +50/-0%
10.0 +50/-0%
±0.0 +50/-0%
NP0±±00ꢀꢀp/ꢁ°
300pin. at 1MHz, °pax
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
50Vdc
±±0Vdc
±±0Vdc
±±0Vdc
±±0Vdc
±±0Vdc
±±0Vdc
110Vdc
110Vdc
Brown
Blue
pp
pp
pp
NP0±±00ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.
NP0±300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.
N750±400ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax
White
TZB4R200
TZB4P300
TZB4P400
10
10
10
Red
pp
pp
pp
30.0 +50/-0% N1±00±500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax
40.0 +50/-0% N1±00±500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax
Green
Yellow
TZB4Z250
10
pp
±5.0 +100/-0%
50.0 +100/-0% N750±300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax
Torque: 1.5 to 9.8pNp Oꢀerating Tepꢀerature Range: -±5 to +85ꢁ°
Second blank: °over filp codes (A: not ꢀrovided, B: ꢀrovided)
rex. TZB4Z100AB10: Terpinal Tyꢀe is A, and °over filp is ꢀrovided.
NP0±300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.
Black+Marking
Black+Marking
TZB4R500
10
pp
50Vdc
Insulation Resistance: 10000M ohp
First blank: Terpinal Tyꢀe
Construction
c
Cover Film (Cover film type)
Rotor Spring
Plastic Case
–
Metal Rotor
Ceramic Plate
Stator Terminal
+
Rotor Terminal
±1
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Land Pattern/Mounting Holes
c
A Type
B Type
+±
+±
8.±
- ±.5
7.±
- ±.5
4.±±±.2
2.4±±.2
(in mm)
(in mm)
Temperature Characteristics
c
TZB4Z030
TZB4Z060
Z±3± (NP±±2±± ppmꢀ/C)
Z±6± (NP±±2±± ppmꢀ/C)
8
6
4
2
8
6
4
2
–25
2±
85
Temp.(/C)
–25
2±
85
Temp.(/C)
–2
–4
–2
–4
–6
–6
–8
–8
5
–1±
–12
–1±
–12
TZB4Z100
TZB4R200
Z1±± (NP±±3±± ppmꢀ/C)
R2±± (N75±±4±± ppmꢀ/C)
8
6
4
8
6
4
2
2
–25
2±
85
Temp.(/C)
–25
2±
85
Temp.(/C)
–2
–4
–2
–4
–6
–6
–8
–8
–1±
–12
–1±
–12
TZB4P300
TZB4P400
P300 (N1200 500 ꢀꢀpm/°C
P400 (N1200 500 ꢀꢀpm/°C
8
6
4
8
6
4
2
2
–25
20
85
Tepꢀ.(/°C
–25
20
85
Tepꢀ.(/°C
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
Continued on the following page.
22
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
°ontinued frop the ꢀreceding ꢀage.
Temperature Characteristics
c
TZB4Z250
TZB4R500
Z250 (NP0 300 ꢀꢀpm/°C
R500 (N750 300 ꢀꢀpm/°C
8
6
4
2
8
6
4
2
–25
20
85
Tepꢀ.(/°C
–25
20
85
Tepꢀ.(/°C
–2
–4
–2
–4
–6
–6
–8
–8
–10
–12
–10
–12
Frequency Characteristics
c
TZB4Z060
TZB4Z100
Z060
Z100
1000
1000
1000
1000
100
Q
100
100
100
Q
5
10
10
10
10
1
1
100 200 300 400 500 600 700 800 900 1000
100 200 300 400 500 600 700 800 900 1000
Frequency (MHzC
Frequency (MHzC
TZB4R200
TZB4R500
R500
R200
1000
1000
100
10
1000
1000
100
100
100
Q
Q
10
10
10
1
1
100
200
300
400
500
600
100
200
300
400
500
Frequency (MHz)
Frequency (MHz)
23
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Temperature Profile
c
Flow Soldering Profile
Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
Standard Profile
Heating
t2
Limit Profile
Pre-heating
Cycle
T1
of reflow
Standard Profile
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
150°C
60 to 120sec.
250°C
5sec. max.
1 time
t1
time (s)
Limit Profile
Pre-heating
Heating
s )MMERSE THE BODY IN SOLDER BATHꢀ AVAILABLE FOR COVER FILM TYPEꢁ
Cycle
of reflow
Temp. (T1)
Time (t1)
Temp. (T3)
Time (t2)
150°C
60 to 120sec.
265 3°C
5sec. max.
2 times
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
T1
t2
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
time (s)
t1
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
5
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245 3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Peak
temperature
(T5)
Pre-heating
Cycle
of reflow
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
s !VAILABLE FOR TERMINAL SHAPE !ꢀ "ꢀ AND %ꢁ
Soldering Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of soldering iron
350 10°C
3sec. max.
30W max.
1 time
Notice (Storage and Operating Conditions)
c
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitors, please store under
the conditions of -10 to +40°C and 30 to
85%RH.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(3) Dusty / dirty atmosphere
5. Do not store under direct sunlight.
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Notice (Soldering and Mounting)
c
1. Soldering
2. Mounting
(1) Can be soldered by reflow soldering method, flow
soldering method, and soldering iron.
(2) Soldering conditions
(1) Do not apply excessive force (preferably 5.0N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
Refer to the temperature profile.
(2) Do not warp and/or bend PCB to protect trimmer
capacitor from breakage.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) When bending the terminals, do not apply
excessive force to the body of the product to
protect the terminal fixing part from damage.
(4) Use a pick-up nozzle of a suitable dimension.
> Without cover film type
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the terminals
or contact failure due to flux wicking up.
(5) When using soldering iron, the string solder
shall be applied to the lower part of the
terminal only. Do not apply flux except to the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the
terminal may cause fixed rotor or contact failure
due to flux invasion into the movable part and/or
the contact point. The soldering iron should not
come in contact with the plastic case of the
trimmer capacitor. If such contact does occur,
the trimmer capacitor may be damaged.
(6) Our recommended chlorine content of solder is
as follows.
- External dimensions of 4.5x4.0mm and
2.5mm bore diameter.
> With cover film type
- 4.0mm external diameter and 2.0mm bore
diameter.
3. Cleaning [with cover film type]
Isopropyl alcohol and ethyl alcohol are available
material for cleaning. If you use any other type of
solvent, please evaluate performance in your
application. Moreover, please confirm that no
damage has occurred to the trimmer capacitor
after cleaning in your conditions.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
5
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
4. Do not break the cover film before the completion
of PCB mounting, soldering, and cleaning.
5. Do not clean the trimmer capacitor after the cover
film has been broken.
MURATA: KMBT010
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. Excessive force applied
to the screwdriver slot may cause deformation of the
products.
6. To break the cover film, first turn the screwdriver
more than 360°, and set the capacitance value.
(Inserting the screwdriver only will not break the
cover film.)
Notice (Other)
c
Before using trimmer capacitors, please test after
assembly in your particular mass production system.
25
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Packaging
Minimum Quantity
c
Minimum Quantity (pcs.)
Part Number
ø180mm Reel
3000
ø330mm Reel
Bulk
500
500
500
100
500
-
TZR1
TZY2
TZC3
TZW4
TZB4
2000
-
1000
-
-
500
500
2500
Tape Dimensions
c
TZR1 Series
TZY2 Series
+0.1
1.5
A
dia.
– 0
2.0
4.0
t
2.0 0.1
4.0 0.1
0.25
1.05 0.2
0.25 0.1
4.0 0.1
+0.1
-0
1.5
dia.
A-Across
section
A
2.7 0.2
1.8 0.2
4.0
t=TZY2 (TZVY2) : 1.6 0.2
(in mm)
Tolerance: 0.1
in mm
TZC3 Series
TZW4 Series
+0.1
+0.1
dia.
– 0
1.5
dia.
1.5
2.0 0.2
0.3
2.6
– 0
2
4
2
4
0.3
A
A
A
A-Across
section
A
A-Across
section
3.6 0.2
4.6
8
8
Tolerance : 0.1
in mm
Tolerance: 0.1
in mm
TZB4 Series
+0.1
1.5
dia.
– 0
3.55 0.2
2.0
8.0
4 .0
0.3 0.1
A
1.8
4.3
A-Across
section
A
Direction of feed
Tolerance: 0.1
in mm
Continued on the following page.
26
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Packaging
Continued from the preceding page.
Reel Dimensions (180mm diameter)
c
TZR1/TZY2 Series
TZC3/TZW4/TZB4 Series
13.0 0.ꢀ dia.
13.0 0.ꢀ dia.
21.0 0.ꢁ dia.
2.0 0.ꢀ
2.0 0.ꢀ
21.0 0.ꢁ dia.
9.0 1.0
13.0 1.0
17.0 1.0
13.0 1.0
17ꢁ 2 dia.
17ꢁ 2 dia.
(in mm)
(in mm)
Reel Dimensions (330mm diameter)
c
TZB4 Series
13.0 0.ꢀ dia.
2.0 0.ꢀ
21.0 0.ꢁ dia.
13.ꢀ 1.0
17.ꢀ 1.0
32ꢁ 2 dia.
(in mm)
27
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Recommended Adjustment Tools
Please use the following recommended screwdrivers.
You can order these drivers using the part numbers below.
Although you can also adjust the capacitance value using commercial products, please use one with the same head size as the
driver listed below.
c For Manual Adjustment
MURATA
Model Number
Manufacturer’s
Model Number
Series
Shape
80
1.5
MURATA MFG.
TZR1
TZY2
KMDR160
KMDR060
KMDR010
KMDR130
KMDR160
Bit shape:
Minus (0.3x0.13)
108
(in mm)
(in mm)
(in mm)
18
ENGINEER INC.
DA-89
Bit shape: Minus (0.8x0.35)
122
50
20
TZC3
TZB4
MURATA MFG.
KMDR010
Bit shape: Minus (2.2x0.4)
125
15
VESSEL MFG.
CERAMIC BLADE
ELECTRONICS
9000
1.3-30
TZW4
NO.9000 -1.3g30
Bit shape: Minus (1.3x30)
(in mm)
c For Automatic Adjustment
MURATA
Model Number
Manufacturer’s
Model Number
Series
Shape
25
0.6
MURATA MFG.
TZY2
KMBT060
KMBT010
KMBT060
Bit shape: Minus (0.56x0.25)
(in mm)
30
TZC3
TZB4
MURATA MFG.
KMBT010
Bit shape: Minus (2.2x0.4)
(in mm)
28
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
T13E.pdf
Mar.12,2015
Qualified Standards
The products listed herein have been produced
by a ISO9001 certified factory.
MURATA FACTORY
Sabae Murata Mfg. Co., Ltd.
∗ No ODCs (Ozone Depleting Chemicals) are used on
any Murata trimmer capacitors.
29
Cat. No. T13E-16
Global Locations
For details please visit www.murata.com
Note
1 Export Control
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
3 Product specifications in this catalog are as of May
2014. They are subject to change or our products
in it may be discontinued without advance notice.
Please check with our sales representatives
or product engineers before ordering. If there
are any questions, please contact our sales
representatives or product engineers.
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
1
2
3
4
5
6
Aircraf equipment
Aerospace equipment
Undersea equipment
Power plant equipment
Medical equipment
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
Transportation equipment (vehicles, trains,
ships, etc.)
7
8
Traffic signal equipment
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10 Application oꢀ similar complexity and/or
reliability requirements to the applications
listed above
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Murata Manufacturing Co., Ltd.
www.murata.com
相关型号：
TZY2Z060AC01B00
New shape of cover can improve the flux invasion compared with current products
MURATA
TZY2Z060AC01R00
New shape of cover can improve the flux invasion compared with current products
MURATA
TZY2Z100A001B00
New shape of cover can improve the flux invasion compared with current products
MURATA
TZY2Z100AC01B00
New shape of cover can improve the flux invasion compared with current products
MURATA
TZY2Z100AC01R00
New shape of cover can improve the flux invasion compared with current products
MURATA
©2020 ICPDF网 联系我们和版权申明