TX2-L-9V [NAIS]
2 A CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE; 2具有高的浪涌电压和击穿电压高，容量继电器
| 型号： | TX2-L-9V |
| 厂家： | 
NAIS(MATSUSHITA ELECTRIC WORKS) |
| 描述： | 2 A CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE |
| 文件： | 总7页 (文件大小：168K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TESTING
2 A CAPACITY RELAY
WITH HIGH SURGE
VOLTAGE & HIGH
TX RELAYS
BREAKDOWN VOLTAGE
7.4
.291
7.4
.291
15
.591
15
.591
FEATURES
• Breakdown voltage between contacts and coil: 2,000 V
• Surge withstand between contacts and coil: 2,500 V
• High contact capacity: 2 A 30 V DC
8.4
8.2
.323
.331
• Surface-mount type available
mm inch
SPECIFICATIONS
Contact
Characteristics
Arrangement
2 Form C
Initial insulation resistance*1
Between open con-
tacts
Min. 1,000 MΩ (at 500 V DC)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
100 mΩ
Initial
Contact material
Gold-clad silver alloy
2 A 30 V DC
1,000 Vrms for 1 min.
(Detection current: 10 mA)
breakdown Between contact sets
Nominal switching capacity
(resistive load)
voltage
Between contact and
2,000 Vrms for 1 min.
coil
(Detection current: 10 mA)
Max. switching power
(resistive load)
60 W
Between open
contacts
(10×160 µs)
Between contacts
and coil (2×10 µs)
Rating
1,500 V (FCC Part 68)
Max. switching voltage
Max. switching current
Min. switching capacity ❇1
220 V DC
2 A
Initial surge
voltage
2,500 V (Telcordia)
10 µA 10 mV DC
140 mW (1.5 to 24 V DC)
270 mW (48 V DC)
Temperature rise*2 (at 20°C)
Max. 50°C
Max. 4 ms (Approx. 2 ms)
[Max. 4 ms (Approx. 2 ms)]
Single side stable
Nominal
operating
power
Operate time [Set time]*3 (at 20°C)
1 coil latching
100 mW (1.5 to 24 V DC)
200 mW (1.5 to 24 V DC)
108
2 coil latching
Release time [Reset time]*4 (at
Max. 4 ms (Approx. 1 ms)
[Max. 4 ms (Approx. 2 ms)]
Min. 750 m/s2 {75 G}
Min. 1,000 m/s2 {100 G}
196 m/s2 {20 G}, 10 to 55 Hz
at double amplitude of 3.3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
Mechanical (at 180 cpm)
2 A 30 V DC
20°C)
Expected
life (min.
operations)
Functional*5
Destructive*6
105
Shock resistance
resistive
Electrical
(at 20 cpm)
1 A 30 V DC
resistive
5×105
Functional*7
Vibration resistance
Destructive
Notes:
❇1This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the ac-
tual load. (SX relays are available for low level load switching [10 µA 1 mV DC –
10 mA 10 V DC])
❇2The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable tem-
perature range is from –40 to +70°C –40°C to +158°F.
Conditions for oper-
ation, transport and Ambient tem- –40°F to +185°F (up to 24 V coil)
–40°C to +85°C (up to 24 V coil)
storage*8
perature ❇2
–40°C to +70°C (48 V coil)
–40°F to +158°F (48 V coil)
(Not freezing and
condensing at low
temperature)
Humidity
5 to 85% R.H.
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
2 A.
Unit weight
Approx. 2 g .071 oz
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10 µs.
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TX
ORDERING INFORMATION
Ex. TX
2
SA
L
H
3V
Z
–
–
–
–
Contact arrangement Surface-mount availability
Operating function Terminal shape Coil voltage (DC)
Packing style
2: 2 Form C
Nil: Standard PC board terminal type or
Nil: self-clinching terminal type
Nil: Single side
Nil: stable
L: 1 coil latching
L2: 2 coil latching
Nil: Standard PC 1.5, 3, 4.5, 5, 6, Nil: Tube packing
board terminal or
surface-mount
terminal
9, 12, 24, 48* V Z: Tape and reel
packing(picked
SA: Standard surface-mount terminal type
SL: High connection reliability surface-mount
SL: terminal type
from the 8/9/10/12
-pin side
H: Self-clinching
terminal
SS: Space saving surface-mount terminal type
Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number suffix “-X” is
*48 V coil type: Single side stable only
needed when ordering.
(ex.) TX2SA-3 V-X
2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.
TYPES AND COIL DATA (at 20°C 68°F)
1) Standard PC board terminal type and self-clinching terminal type
1. Single side stable
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Pick-up
voltage,
V DC (max.)
Drop-out
voltage,
V DC (min.)
Coil
resistance,
Ω ( 10%)
Standard PC
Self-clinching
terminal
board terminal
mA ( 10%)
TX2-1.5 V
TX2-3 V
TX2-H-1.5 V
TX2-H-3 V
TX2-H-4.5 V
TX2-H-5 V
TX2-H-6 V
TX2-H-9 V
TX2-H-12 V
TX2-H-24 V
TX2-H-48 V
1.5
3
1.13
2.25
3.38
3.75
4.5
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
4.8
93.8
46.7
31
16
140
140
140
140
140
140
140
140
270
2.2
4.5
6.7
7.5
9
64.3
145
TX2-4.5 V
TX2-5 V
4.5
5
28.1
23.3
15.5
11.7
5.8
178
TX2-6 V
6
257
TX2-9 V
9
6.75
9
579
13.5
18
TX2-12 V
TX2-24 V
TX2-48 V
12
24
48
1,028
4,114
8,533
18
36
36
5.6
57.6
2. 1 Coil latching
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Coil
resistance,
Ω ( 10%)
Set voltage, Resetvoltage,
Standard PC
Self-clinching
terminal
V DC (max.)
V DC (max.)
board terminal
mA ( 10%)
TX2-L-1.5 V
TX2-L-3 V
TX2-L-4.5 V
TX2-L-5 V
TX2-L-6 V
TX2-L-9 V
TX2-L-12 V
TX2-L-24 V
TX2-L-H-1.5 V
TX2-L-H-3 V
TX2-L-H-4.5 V
TX2-L-H-5 V
TX2-L-H-6 V
TX2-L-H-9 V
TX2-L-H-12 V
TX2-L-H-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
66.7
33.3
22.2
20
22.5
90
100
100
100
100
100
100
100
100
2.2
4.5
6.7
7.5
9
4.5
5
202.5
250
6
16.7
11.1
8.3
360
9
6.75
9
6.75
9
810
13.5
18
12
24
1,440
5,760
18
18
4.2
36
3. 2 Coil latching
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Coil
resistance,
Ω ( 10%)
Set voltage, Resetvoltage,
Standard PC
Self-clinching
terminal
V DC (max.)
V DC (max.)
board terminal
mA ( 10%)
TX2-L2-1.5 V
TX2-L2-3 V
TX2-L2-4.5 V
TX2-L2-5 V
TX2-L2-6 V
TX2-L2-9 V
TX2-L2-12 V
TX2-L2-24 V
Notes:
TX2-L2-H-1.5 V
TX2-L2-H-3 V
TX2-L2-H-4.5 V
TX2-L2-H-5 V
TX2-L2-H-6 V
TX2-L2-H-9 V
TX2-L2-H-12 V
TX2-L2-H-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
133.9
66.7
44.5
40
11.2
45
200
200
200
200
200
200
200
200
2.2
4.5
6.7
7.5
9
4.5
5
101.2
125
6
33.3
22.2
16.7
8.3
180
9
6.75
9
6.75
9
405
13.5
18
12
24
720
18
18
2,880
36
1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of
square wave coil pulse.
2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TX
2) Surface-mount terminal type
1. Single side stable
Nominal
operating
current,
Nominal
voltage,
V DC
Drop-out
voltage,
V DC (min.)
Nominal
operatingpower,
mW
Max. allowable
voltage,
Pick-up voltage,
V DC (max.)
Coil resistance,
Part No.
Ω ( 10%)
V DC
mA ( 10%)
TX2S❍-1.5 V
TX2S❍-3 V
TX2S❍-4.5 V
TX2S❍-5 V
TX2S❍-6 V
TX2S❍-9 V
TX2S❍-12 V
TX2S❍-24 V
TX2S❍-48 V
1.5
3
1.13
2.25
3.38
3.75
4.5
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
4.8
93.8
46.7
31
16
140
140
140
140
140
140
140
140
270
2.2
4.5
6.7
7.5
9
64.3
145
4.5
5
28.1
23.3
15.5
11.7
5.8
178
6
257
9
6.75
9
579
13.5
18
12
24
48
1,028
4,114
8,533
18
36
36
5.6
57.6
2. 1 coil latching
Nominal
operating
current,
Nominal
voltage,
V DC
Nominal
operatingpower,
mW
Max. allowable
voltage,
Set voltage,
V DC (max.)
Reset voltage,
V DC (max.)
Coil resistance,
Part No.
Ω ( 10%)
V DC
mA ( 10%)
TX2S❍-L-1.5 V
TX2S❍-L-3 V
TX2S❍-L-4.5 V
TX2S❍-L-5 V
TX2S❍-L-6 V
TX2S❍-L-9 V
TX2S❍-L-12 V
TX2S❍-L-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
66.7
33.3
22.2
20
22.5
90
100
100
100
100
100
100
100
100
2.2
4.5
6.7
7.5
9
4.5
5
202.5
250
6
16.7
11.1
8.3
360
9
6.75
9
6.75
9
810
13.5
18
12
24
1,440
5,760
18
18
4.2
36
3. 2 coil latching
Nominal
operating
current,
Nominal
voltage,
V DC
Nominal
operatingpower,
mW
Max. allowable
voltage,
Set voltage,
V DC (max.)
Reset voltage,
V DC (max.)
Coil resistance,
Part No.
Ω ( 10%)
V DC
mA ( 10%)
TX2S❍-L2-1.5 V
TX2S❍-L2-3 V
TX2S❍-L2-4.5 V
TX2S❍-L2-5 V
TX2S❍-L2-6 V
TX2S❍-L2-9 V
TX2S❍-L2-12 V
TX2S❍-L2-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
133.9
66.7
44.5
40
11.2
45
200
200
200
200
200
200
200
200
2.2
4.5
6.7
7.5
9
4.5
5
101.2
125
6
33.3
22.2
16.7
8.3
180
9
6.75
9
6.75
9
405
13.5
18
12
24
720
18
18
2,880
36
❍: For each surface-mounted terminal variation, input the following letter.
SA type: A , SL type: L , SS type: S
Notes:
1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
3. Tape and reel packing is also available for surface-mount type by request. Part number suffix "-X" or "-Z" is needed when ordering.
In this case, "X" or "Z" are not marked on the relay.
Quantity in tape and reel: 500 pcs.
(ex.) • TX2SA-3V-X
• TX2SA-L-3V-Z
Picked from the 1/3/4/5-pin side
Picked from the 8/9/10/12-pin side
4. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TX
mm inch
DIMENSIONS
PC board pattern
(Copper-side view)
Schematic (Bottom view)
1. Single side stable and 1 coil latching type
15
Single side stable
(Deenergized condition)
1 coil latching
(Reset condition)
Standard PC board terminal
7.4
.591
.291
0.65
8.2
10.16
.026
.323
1
3
4
5
1
3
4 5
.400
2.54
+
–
3.5
.100
.138
0.5
0.25
.010
5.08
.200
.020
5.08
.200
1.15
5.08
.200
2.54
.100
–
+
.045
12
10
9
8
12
10 9 8
8-1.0 dia
Direction indication*
Direction indication*
8-.039 dia
15
.591
7.4
Self clinching terminal
.291
Tolerance: 0.1 .004
*Orientation stripe located on top of relay.
0.65
8.2
.026
.323
3.5
.138
0.5
0.25
.010
.020
5.08
.200
1.15
5.08
.200
2.54
.100
.045
General tolerance: 0.3 .012
Suggested mounting pad
Schematic (Top view)
Surface-mount terminal
SA type
(Top view)
Single side stable
(Deenergized condition)
1 coil latching
(Reset condition)
5.08
.200
2.54
1
.100
.039
15
7.4
12 10
9
8
12
10
9
8
.591
1.6
.0.63
.291
–
+
3.16
.124
7.24
8.2
8.4
.285
.323
+
–
.331
1
3
4
5
1
3
4
5
5.08
0.5
0.3
0.65
.026
.020
Direction indication
Direction indication
.200
9.4 0.5
.370 .020
.012
0.25
.010
For glue-pad
2.54
.100
15
.591
5.08
.200
15
.591
7.4
5.08
.200
SL type
SS type
2.54
1
.291
.100
.039
8.2
Max.
10.0
.390
3.16
.124
.323
7.24
.285
0.5
5.08
0.65
.026
.020
0.25
.010
.200
9.4 0.5
.370 .020
2.54
.100
5.08
.200
15
.591
5.08
.200
7.4
2.54
.100
1
.291
.039
8.2
Max.
10.0
.390
2.16
.085
.323
6.24
.246
0.5
5.08
.200
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
7.4 0.5
.291 .020
Tolerance: 0.1 .004
General tolerance: 0.3 .012
PC board pattern
(Copper side view)
Schematic (Bottom view)
2 coil latching (Reset condition)
2. Coil latching type
Standard PC board terminal
15
7.4
.591
.291
12.7
1
3
4
5
6
0.65
.500
2.54
8.2
.026
.323
.100
+
–
3.5
.138
5.08
.200
+
12
–
7
0.5
0.25
.010
.020
10
9
8
5.08
.200
1.15
5.08
.200
2.54
.100
.045
10-1.0 dia
Direction indication*
10-.039 dia
15
.591
7.4
Self clinching terminal
.291
Tolerance: 0.1 .004
0.65
8.2
.026
.323
3.5
.138
0.5
0.25
.010
.020
5.08
.200
1.15
5.08
.200
2.54
.100
.045
General tolerance: 0.3 .012
Suggested mounting pad (Top view)
Schematic (Top view)
2 coil latching (Reset condition)
Surface-mount terminal
SA type
5.08
15
2.54
1
7.4
.591
.100
.200
.039
.291
1.6
.0.63
12 10
9
8
7
–
–
6
8.2
3.16
.124
8.4
.323
.331
+
+
7.24
.285
5.08
0.5
0.65
.026
.020
.200
9.4 0.5
.370 .020
1
3
4
5
0.25
.010
2.54
.100
5.08
.200
0.3
.012
For glue-pad
Direction indication
15
.591
15
.591
7.4
SL type
SS type
5.08
.200
.291
2.54
1
.100
.039
8.2
Max.
10.0
.390
.323
3.16
.124
0.5
7.24
.285
5.08
0.65
.026
.020
0.25
.010
.200
9.4 0.5
.370 .020
2.54
.100
5.08
.200
15
.591
7.4
5.08
.200
2.54
.100
.291
1
.039
8.2
Max.
10.0
.390
2.16
.085
.323
6.24
.285
0.5
5.08
.200
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
7.4 0.5
.291 .020
General tolerance: 0.3 .012
Tolerance: 0.1 .004
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TX
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TX2-5V, 10 pcs.
Operating frequency: 180 cpm
100
90
3.0
2.0
100
50
80
Pick-up voltage
Max.
Min.
70
60
50
40
30
20
10
0
DC resistive load
1.0
30
20
30V DC
resistive load
0.5
0.4
0.3
Drop-out voltage
10
0
0.2
Max.
Min.
0
20 30 50
100
200 300
1.0
2.0
10
100
1,000
10,000
Contact voltage, V
No. of operations, ×104
Switching current, A
4. Electrical life
5-(1). Coil temperature rise
Tested sample: TX2-5V, 6 pcs.
Operating frequency: 20 cpm
Tested sample: TX2-5V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F, 85°C 185°F
Change of pick-up and drop-out voltage
Change of contact resistance
70
100
90
100
90
80
70
60
50
40
30
20
10
0
+25°C +77°F
+85°C +185°F
60
50
40
30
20
10
0
80
Pick-up voltage
Max.
Min.
70
60
50
2A
2A
Max.
Min.
40
Drop-out voltage
Max.
Min.
0A
0A
30
20
10
0
100 110 120 130 140 150
No. of operate, ×104
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
No. of operations, ×104
No. of operations, ×104
5-(2). Coil temperature rise
Tested sample: TX2-48V, 6 pcs.
Point measured: Inside the coil
6-(1). Operate and release time (with diode)
Tested sample: TX2-5V, 10 pcs.
6-(2). Operate and release time (without diode)
Ambient temperature: 25°C 77°F, 70°C 158°F
5
5
70
+25°C +77°F
+70°C +158°F
Operate time
Release time
Operate time
Release time
60
50
40
30
20
10
0
4
4
Max.
Max.
2A
Min.
3
Min.
3
2A
0A
0A
Max.
2
2
Min.
Max.
Min.
1
0
1
0
70
80
90
100 110 120
70
80
90
100 110 120
100 110 120 130 140 150
No. of operations, ×104
Coil applied voltage, %V
Coil applied voltage, %V
7. Distribution of pick-up and drop-out voltage
Tested sample: TX2-5V, 50 pcs.
8. Distribution of set and reset voltage
Tested sample: TX2-L2-12V, 30 pcs.
9. Ambient temperature characteristics
Tested sample: TX2-5V, 5 pcs.
Set voltage
40
Reset voltage
30
15
10
5
Pick-up voltage
Drop-out
voltage
x
x
20
Drop-out voltage
20
Pick-up voltage
–40 –20
0
20 40 60 80
Ambient temperature, °C
10
0
–20
–40
0
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TX
10. Distribution of contact resistance
11-(1). High frequency characteristics
11-(2). High frequency characteristics
Tested sample: TX2-5V, 30 pcs. (30 × 4 contacts)
Tested sample: TX2-12V, 2 pcs.
Isolation characteristics
Tested sample: TX2-12V, 2 pcs.
Insertion loss characteristics
1
3
4
5
Terminal
Nos. 4-5, 8-9
35
30
25
20
15
10
5
12 10 9
8
(BOTTOM VIEW)
100
50
Terminal
Nos. 3-4, 9-10
1.0
0.8
0.6
0.4
0.2
0
10
100
1,000
10
100
1,000
0
20
30
40
50
Frequency, MHz
Contact resistance, mΩ
Frequency, MHz
12-(1). Malfunctional shock (single side stable)
Tested sample: TX2-5V, 6 pcs
12-(2). Malfunctional shock (latching)
Tested sample: TX2-L2-12V, 6 pcs.
Deenergized condition
Energized condition
Reset state
Set state
X
Z
X
X'
Z
X'
Z'
Z'
Y
Y
1000m/s2
Y
1000m/s2
Y
Y'
Y'
X
Z
X
Z
1000m/s2
2
1000m/s
1000m/s2
2
1000m/s
1000m/s2
X'
2
1000m/s
Z'
1000m/s2
X'
2
1000m/s
Z'
1000m/s2
1000m/s2
Y'
Y'
13-(1). Influence of adjacent mounting
13-(2). Influence of adjacent mounting
13-(3). Influence of adjacent mounting
ON
5
0
5
5
ON ON
ON
Pick-up voltage
Pick-up voltage
Pick-up voltage
0
0
ON
ON
ON
–5
–5
–5
ON
ON
ON
OFF
OFF OFF
5
0
5
5
0
OFF
OFF
OFF
Drop-out voltage
Drop-out voltage
Drop-out voltage
0
OFF
–5
–5
–5
OFF
OFF
OFF
0
2
4
6
8
10
0
2
4
6
8
10
0
2
4
6
8
10
.079.157.236.315.394
.079.157.236.315.394
.079.157.236.315.394
Inter-relay distance , mm inch
Inter-relay distance , mm inch
Inter-relay distance , mm inch
14. Pulse dialing test
Tested sample: TX2-5V, 6 pcs.
(35 mA 48 V DC wire spring relay load)
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
80
70
60
50
40
30
20
10
0
100
90
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
40
458 Ω
+
0.08
µF
0.08
µF
Max.
Min.
4
3
48V DC
30
20
10
0
Drop-out voltage
–
Max.
Min.
458 Ω
Wire spring relay
10
20
30
40
50
10
20
30
40
50
No. of operation, ×104
No. of operations, ×104
Note: Data of surface-mount type are the same as those of PC board terminal type.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TX
Notes
1. Packing style
2) Tape and reel packing (surface-mount
terminal type)
(1) Tape dimensions
(i) SA type
(2) Dimensions of plastic reel
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
mm inch
21 0.6 dia.
.827 .024 dia.
mm inch
0.5
Orientation (indicates PIN No.1)stripe
2.0
.020
1.5+0.1 dia.
.079
0
Relay polarity bar
(Z type)
.059+.004 dia.
1.75
.069
0
0.4
.016
2.0
4.0
.079 .157
100 1 dia.
C
3.937 .039 dia.
A
B
11.5
.453
15.5
.610
370 2 dia.
14.567 .079 dia.
Stopper (gray)
Stopper (green)
D
TX/TX-D/TX-S
-SMD relays
16.0
.630
0.3
10.0 .394
24.0
9.2 0.2
13 0.5 dia.
.012
.945
.362 .008
.512 .020 dia.
24.4+02
2.0 0.2
Tape coming out direction
.961+0.079
.079 .008
(ii) SL type
mm inch
1.5+0.1 dia.
0
Relay polarity bar
(Z type)
.059+.004 dia.
1.75
.069
0
0.4
.016
2.0
4.0
.079 .157
11.5
.453
15.5
.610
0.3
16.0
.630
TX/TX-D/TX-S
-SMD relays
24.0
.945
.012 10.8 0.2
.425 .008
10.0
.394
Tape coming out direction
(iii) SS type
mm inch
2.2 dia.
.087 dia.
1.5+0.1 dia.
0
Relay polarity bar
(Z type)
.059+.004 dia.
2.0
4.0
1.75
.069
0
0.4
.016
.079 .157
11.5
.453
15.5
.610
0.3
TX/TX-D/TX-S
-SMD relays
16.0
.630
8.0 24.0
.01210.8 0.2
.425 .008
.945
.315
Tape coming out direction
For Cautions for Use, see Relay Technical Information.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号：
TX2-L-9V-1-X
Electromechanical Relay, DPDT, 13.5VDC (Coil), 1A (Contact), 220VDC (Contact), Random, DC Output
PANASONIC
TX2-L-9V-1-Z
Electromechanical Relay, DPDT, 13.5VDC (Coil), 1A (Contact), 220VDC (Contact), Random, DC Output
PANASONIC
TX2-L-9V-TH-X
Electromechanical Relay, DPDT, 13.5VDC (Coil), 7.5A (Contact), 220VDC (Contact), Random, AC/DC Output
PANASONIC
TX2-L-9V-TH-Z
Electromechanical Relay, DPDT, 13.5VDC (Coil), 7.5A (Contact), 220VDC (Contact), Random, AC/DC Output
PANASONIC
TX2-L-9V-X
Electromechanical Relay, DPDT, 13.5VDC (Coil), 2A (Contact), 220VDC (Contact), Random, DC Output
PANASONIC
TX2-L-9V-Z
Power/Signal Relay, 2 Form C, DPDT, Latched, 0.011A (Coil), 9VDC (Coil), 100mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Through Hole-Straight Mount,
PANASONIC
TX2-L-H-1.5V-1
Power/Signal Relay, DPDT, Latched, 0.067A (Coil), 1.5VDC (Coil), 100mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
TX2-L-H-1.5V-Z
Power/Signal Relay, DPDT, Latched, 0.067A (Coil), 1.5VDC (Coil), 100mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount
PANASONIC
TX2-L-H-12V-1
Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 12VDC (Coil), 100mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
TX2-L-H-12V-TH
Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 12VDC (Coil), 100mW (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明