FB96MSP2-A-1 [NEC]
Board Connector, 96 Contact(s), 4 Row(s), Male, Straight, Press Fit Terminal;
| 型号： | FB96MSP2-A-1 |
| 厂家： | 
NEC |
| 描述： | Board Connector, 96 Contact(s), 4 Row(s), Male, Straight, Press Fit Terminal PC 连接器 |
| 文件： | 总24页 (文件大小：329K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA S HEET
Connector
FB Series 4-row Type
4-row Metric Connectors for Printed Circuit Board
This m etric connector is ideal for connecting boards such as those of controllers and com m unication devices
that dem and high-perform ance and high-density characteristics.
FEATURES
™ Conform s to IEC61076-4-104 Standard
™ High-density m ounting using 2 m m pitch array
™ Num ber of pins can be selected from 24, 48, 96, and 192
™ Supports m ulti-stage connection structure for circuit protection
APPLICATIONS
Interface between boards such as switchboards, transfer devices, and m easurem ent control devices.
Notes on correct usage of connectors
* Do not use this device in conditions where the tem perature, voltage, and current exceed the
restricted range.
* Misuse could cause the product to overheat or catch fire.
The inform ation in this docum ent is subject to change w ithout notice.
Docum ent No. 0132EMDD03VOL01E
Date Published August 2002 M
Printed in J apan
©
NEC TOKIN Corporation 2002
FB Series 4-row Type
Perform ance
Param eter
F Type (Fem ale)
M Type (Male)
Withstand voltage
AC1000 Vrm s for 1 m inute (between adjacent / facing pins)
Insulation resistance
Connection resistance
5000 MΩ m in. (at DC 100V) (between adjacent / facing pins)
A row : 25 m Ω m ax.
B row : 35 m Ω m ax.
C row : 40 m Ω m ax.
D row : 45 m Ω m ax.
Curent capacity
1 A / pin (am bient tem perature 75˚C)
Connector total insertion force
192 pins : 120 N m ax.
96 pins : 60 N m ax.
48 pins : 30 N m ax.
24 pins : 15 N m ax.
Connector total withdrawal force
192 pins : 27 N m in.
96 pins : 14 N m in.
48 pins : 7 N m in.
24 pins : 4 N m in.
Gauge hold force
0.15N m in.
––
(0.5 w × 0.485 t gauge)
Num ber of insertions and withdrawals
100 cycles m ax. (with power off)
Connector total press-in force
(The value in press-fit connection is
shown about F type)
192 pins : 16 kN m in.
96 pins : 8 kN m in.
48 pins : 4 kN m in.
24 pins : 2 kN m in.
192 pins : 30 kN m in.
96 pins : 15 kN m in.
48 pins : 7.5 kN m in.
24 pins : 4 kN m in.
Press fit term inal hold force
(The value in press-fit connection is
shown about F type)
5N m in.
20N m in.
Pert Num ber System
1. F type
Part Num ber : FB#FR (a)-A
FB : Series nam e
#
: Num ber of pins (24, 48, 96, 192)
F
R
: Fem ale side connector
: Form of a lead term inal (Right-angle pin)
(a) : PCB m ounting (H : Through-hole soldering connection,
P : Press-fit connection)
A
: Gold plating thickness (0.8 µm m in.)
2. M type
Part Num ber : FB#MSP (a)-A-(b)(c)
FB : Series nam e
#
: Num ber of pins (24, 48, 96, 192)
: Male side connector
M
S
: Form of a lead term inal (Straight pin)
: PCB m ounting (Press-fit connection)
P
(a) : Cable connector side pin length (2 : 4.3 m m , 4 : 13.6 m m )
: Gold plating thickness (0.8 µm m in.)
A
(b) : Fem ale side connector connecting pin length (1 : 5.00 m m , 2 : 5.75 m m , 3 : 6.50 m m , S : sequence
“S” m eans the com bination of 5.0 m m , 5.75 m m and 6.50 m m .
(c) : Design order of sequence type
)
2
FB Series 4-row Type
Part Num bers
Fig. No.
Figure No. of Conform ance
Board Dim ensions
Type
Part Num ber
FB24FRH-A
Num ber of pins
of Dim ensions
24
48
1 – 1
FB48FRH-A
1 – 2
3
4
FB96FRH-A
96
1 – 3
FB192FRH-A
FB24FRP-A
192
24
1 – 4
F type
(fem ale side)
1 – 5
FB48FRH-A
48
1 – 6
FB96FRP-A
96
1 – 7
FB192FRP-A
192
24
1 – 8
FB24MSP2-A-1
FB24MSP2-A-3
FB48MSP2-A-1
FB96MSP2-A-1
FB192MSP2-A-1
FB192MSP2-A-S1
FB192MSP4-A-S1
2 – 1
24
2 – 2
48
2 – 3
M type
96
2 – 4
5
(m ale side)
192
192
192
2 – 5
2 – 6
2 – 7
3
FB Series 4-row Type
Dim ensions
Fig. 1-1 FB24FRH-A
Lot code marking
11.9
2 × 5 = 10
2
1
2
6
2 1 Pin line No.
3
A
4
(Front view )
(Bottom view )
2
A in detail
2 × 5 = 10
Piece No.
Part No.
FB-24FA housing
FB-FA locator block
FB-FA contact
Material
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
e
1
1
24
4
FB Series 4-row Type
Dim ensions
Fig. 1-2 FB48FRH-A
Lot code marking
23.9
2 × 11 = 22
1
2
2
12
8
2 1 Pin line No.
3
A
4
(Front view )
(Bottom view )
2
A in detail
2 × 11 = 22
Piece No.
Part No.
Material
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
e
FB-48FA housing
FB-FA locator block
FB-FA contact
1
2
48
5
FB Series 4-row Type
Dim ensions
Fig. 1-3 FB96FRH-A
Lot code marking
47.9
2 × 23 = 46
1
2
2
24
20
14
8
2 1 Pin line No.
3
A
4
(Front view )
(Bottom view )
2
A in detail
2 × 23 = 46
Piece No.
Part No.
FB-96FA housing
FB-FA locator block
FB-FA contact
Material
Quantity
q
w
e
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
1
note
4 or 1
96
Note: This quantity changes with the size of locator block.
6
FB Series 4-row Type
Dim ensions
Fig. 1-4 FB192FRH-A
Lot code marking
95.9
2 × 47 = 94
1
2
2
48
44
38
32
26
20
14
8
2 1 Pin line No.
3
A
4
(Front view )
(Bottom view )
A in detail
2
2 × 47 = 94
Piece No.
Part No.
FB-192FA housing
FB-FA locator block
FB-FA contact
Material
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
Quantity
1
q
w
e
note
8 or 2
192
Note: This quantity changes with the size of locator block.
7
FB Series 4-row Type
Dim ensions
Fig. 1-5 FB24FRP-A
※
※
※
※
※
Lot code marking
11.9
2 × 5 = 10
2
2
1
Pin line No.
1
6
A
2
B
4
3
4
6
2
2 × 5 = 10
(Front view )
(Bottom view )
A in detail
B in detail
Piece No.
Part No.
Material
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
e
FB-24FA housing
FB-FA locator block
FB-FA contact
1
1
24
8
FB Series 4-row Type
Dim ensions
Fig. 1-6 FB48FRP-A
※
※
※
※
※
Lot code marking
23.9
2 ×11 = 22
2
1
2
Pin line No.
1
12
A
2
B
3
4
4
6
2
2×11 = 22
(Front view )
(Bottom view )
A in detail
B in detail
Piece No.
Part No.
Material
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
e
FB-48FA housing
1
2
FB-FA locator block
FB-FA contact
48
9
FB Series 4-row Type
Dim ensions
Fig. 1-7 FB96FRP-A
※
※
※
※
※
Lot code marking
47.9
2×23 = 46
2
1
2
24
1
Pin line No.
A
2
B
3
4
4
6
2
2×23 = 46
(Front view )
(Bottom view )
B in detail
A in detail
Piece No.
Part No.
FB-96FA housing
FB-FA locator block
FB-FA contact
Material
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
e
1
note
4 or 1
96
Note: This quantity changes with the size of locator block.
10
FB Series 4-row Type
Dim ensions
Fig. 1-8 FB192FRP-A
※
※
※
※
※
Lot code marking
95.9
2×47= 94
2
1
2
48
1
Pin line No.
A
2
B
3
4
4
6
2
2×47= 94
(Front view )
(Bottom view )
B in detail
A in detail
Piece No.
Part No.
FB-192FA housing
FB-FA locator block
FB-FA contact
Material
Quantity
1
q
w
e
LCP (UL94-V0)
LCP (UL94-V0)
Phosphor bronze
note
8 or 2
192
Note: This quantity changes with the size of locator block.
11
FB Series 4-row Type
Dim ensions
Fig. 2-1 FB24MSP2-A-1
Lot code marking
2 × 5 = 10
2
5
4.3
Pin line No. 1
2
6
D
C
B
A
2
1
11.9
2
2 × 5 = 10
Piece No.
Part No.
FB-24MA housing
FB-MA contact 12
Material
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
1
24
12
FB Series 4-row Type
Dim ensions
Fig. 2-2 FB24MSP2-A-3
Lot code marking
2 × 5 = 10
2
6.5
4.3
Pin line No. 1
2
6
D
C
B
A
2
1
11.9
2
2 × 5 = 10
Piece No.
Part No.
FB-24MA housing
FB-MA contact 32
Material
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
1
24
13
FB Series 4-row Type
Dim ensions
Fig. 2-3 FB48MSP2-A-1
Lot code marking
2 × 11 = 22
2
5
4.3
Pin line No. 1
2
8
12
D
C
B
A
2
1
23.9
2
2 × 11 = 22
Piece No.
Part No.
FB-48MA housing
FB-MA contact 12
Material
Quantity
q
w
LCP (UL94-V0)
1
Phosphor bronze
48
14
FB Series 4-row Type
Dim ensions
Fig. 2-4 FB96MSP2-A-1
Lot code marking
2 × 23 = 46
2
5
4.3
Pin line No. 1
2
8
14
20
24
D
C
B
A
2
1
47.9
2
2 × 23 = 46
Piece No.
Part No.
Material
LCP (UL94-V0)
Phosphor bronze
Quantity
q
w
FB-96MA housing
FB-MA contact 12
1
96
15
FB Series 4-row Type
Dim ensions
Fig. 2-5 FB192MSP2-A-1
Lot code marking
2 × 47 = 94
2
5
4.3
Pin line No. 1 2
8
14
20
26
32
38
44
48
D
C
B
A
2
1
95.9
2
2 × 47 = 94
Piece No.
Part No.
Material
Quantity
q
w
FB-192MA housing
FB-MA contact 12
LCP (UL94-V0)
1
Phosphor bronze
192
16
FB Series 4-row Type
Dim ensions
Fig. 2-6 FB192MSP2-A-S1
Lot code marking
2 × 47 = 94
2
4.3
note
Pin line No. 1 2
8
14
20
26
32
38
44
48
D
C
B
A
4
1
3
2
95.9
2
2 × 47 = 94
Pin line No.
Note Contact sequence configration (for front view)
1
2
3
4
5
6
43 44 45 46 47 48
Contact length 01 : 5.00 (FB-MA Contact 12)
02 : 5.75 (FB-MA Contact 22)
03 02 02 01 01 01
03 02 02 01 01 01
03 02 02 01 01 01
03 02 02 01 01 01
01 01 01 02 02 03
01 01 01 02 02 03
01 01 01 02 02 03
01 01 01 02 02 03
D
C
B
A
03 : 6.50 (FB-MA Contact 32)
Piece No.
Part No.
FB-192MA housing
FB-MA contact 12
FB-MA contact 22
FB-MA contact 32
Material
Quantity
q
w
e
r
LCP (UL94-V0)
Phosphor bronze
Phosphor bronze
Phosphor bronze
1
168
16
8
17
FB Series 4-row Type
Dim ensions
Fig. 2-7 FB192MSP4-A-S1
Lot code marking
2 × 47 = 94
2
note
13.6
Pin line No. 1 2
8
14
20
26
32
36
44
48
D
C
B
A
4
1
3
2
95.9
2
2 × 47 = 94
Pin line No.
Note Contact sequence configration (for front view)
1
2
3
4
5
6
43 44 45 46 47 48
Contact length
01 : 5.00 (FB-MA Contact 14)
02 : 5.75 (FB-MA Contact 24)
03 : 6.50 (FB-MA Contact 34)
03 02 02 01 01 01
03 02 02 01 01 01
03 02 02 01 01 01
03 02 02 01 01 01
01 01 01 02 02 03
01 01 01 02 02 03
01 01 01 02 02 03
01 01 01 02 02 03
D
C
B
A
Piece No.
Part No.
FB-192MA housing
FB-MA contact 14
FB-MA contact 24
FB-MA contact 34
Material
LCP (UL94-V0)
Phosphor bronze
Phosphor bronze
Phosphor bronze
Quantity
q
w
e
r
1
168
16
8
18
FB Series 4-row Type
Conform ance Board Dim ensions
Fig. 3 Mounting side for F type (Through-hole soldering connection)
48 to 192 pins
+ 0.05
φ
2.05
– 0
+ 0.1
φ
1.5
– 0
φ
0.6 ± 0.1
4
4
1
Pin line No.1
2
3
n
A
B
C
D
2 ± 0.05
A ± 0.1
Number of Pins
Dimension A
Note F type connector mounting side figure
48
96
22
46
94
192
24 pins
+ 0.05
φ
2.05
– 0
+ 0.1
φ
1.5
– 0
4
4
1
φ
0.6 ±0.1
Pin line No.
1 2 3 4 5 6
A
B
C
D
2 ± 0.05
10±0.1
Note F type connector mounting side figure
19
FB Series 4-row Type
Conform ance Board Dim ensions
Fig. 4 Mounting side for F type (Press-fit connection)
48 to 192 pins
φ
φ
0.65 to 0.8 (finished diameter),
25 m min. (copper plating thickness)
+0.05
+ 0.1
φ
2.05
–0
µ
1
4
4
φ
1.5
–0
0.81 to 0.86 (prepared hole diameter)
n
Pin line No. 1 2 3
A
B
C
D
2±0.05
A±0.1
Note F type connector mounting side figure
Number of Pins
Dimension A
48
96
22
46
94
192
24 pins
+ 0.05
φ
2.05
– 0
φ
1.5 + 0.1
–0
4
4
1
φ
φ
0.65 to 0.8 (finished diameter),
25
µ
m min. (copper plating thickness)
0.81 to 0.86 (prepared hole diameter)
Pin line No.1 2 3 4 5 6
A
B
C
D
2±0.05
10±0.1
Note F type connector mounting side figure
20
FB Series 4-row Type
Conform ance Board Dim ensions
Fig. 5 Mounting side for M type
φ
φ
0.65 to 0.8 (finished diameter),
25 m min. (copper plating thickness)
0.81 to 0.86 (prepared hole diameter)
µ
Pin line No.
1 2 3
n
A
B
C
D
2 ± 0.05
A ± 0.1
Number of Pins
Dimension A
24
48
10
22
46
94
96
192
21
FB Series 4-row Type
Precautions
1. General precautions
(1) Make sure to design the circuit in such a m anner that no current flows which exceed the rating specified
for each product.
A sustained excess current will cause degradation of the insulation orland connection due to overheat-
ing of the connector.
(2) The basic function of the connector is such that the connection is com pleted when the m ale and fem ale
connectors fit together.
If the connector is designed to prevent reverse-fitting, m ake sure that the m ale and fem ale connectors
are fitted together in the correct orientation.
Forcibly inserting the connector in the reverse orientation will result in dam age to the housing or pins,
thus m arring the function of the connector.
(3) If possible, apply force evenly across the connector when connecting and parting the m ale and fem ale
connectors.
Excessive prying of the connector for insertion/rem oval will result in dam age to the hous-ing or pins.
(4) The shape of m olded parts such as housing m ay change to prevent the warp etc. However, this does not
affect perform ance of the parts.
(5) The color of m olded parts such as the housing m ay differ from one m anufacturing lot to another; how-
ever, this does not affect perform ance.
2. Precautions in operating environm ent
(1) Atm osphere
Avoid, wherever possible, exposure to organic gases, dusty locations. and salty/hum id environm ents
which m ay dam age reliability of the connection.
If the connectors are likely to be exposed while not connected, m ake sure that they are placed indoors
where they can be protected from such environm ents as described above or the devices them selves have
such a structure m aking such a protection possible.
(2) Operating
When rem oving connectors with a lock function, be sure to unlock them . Forcibly rem ov-ing connectors
without unlocking them m ay cause the lock to be weakened or, in the worst case, cause dam age to the
lock.
(3) Handling
Avoid dropping or handling the products carelessly.
Never use connectors which have been dropped: an excessive im pact m ay have been applied to the
pins, causing them to bend or dam aging the connection reliability.
3. Precautions in m ounting (surface-packaging type excluded)
The precautions here apply to m ounting NEC connectors onto a printed-circuit board.
(1) Thickness of printed-circuit board
Press-in type: Use a board of recommended thickness.
The standard back-panel board thickness is 2.4 mm.
(2) Printed-circuit board dim ensions
If a part has specified connector m ounting hole dim ensions (pitch; hole diam eter) and a specified plat-
ing thickness for the printed board, m ake sure that it is m ounted in accordance with the drawing. (This is
very im portant especially for printed boards for m ounting press-fit connectors,)
(3) Inserting press-in type connectors into the back panel
q When inserting a connector, consider a suitable insertion force for the num ber of pins before determ ining
the specifications for the pressing m achine.
w press fitting requires dedicatedjig and tools (such as ones having a structure to press down the pin
stopper).
4. Storing connectors
1) Avoid storing connectors under high-tem perature and high-hum idity conditions.
2) Avoid dusty places.
22
FB Series 4-row Type
23
FB Series 4-row Type
No part of this docum ent m ay be copied or reproduced in any form or by any m eans without the prior
written consent of NEC/TOKIN Corporation. NEC/TOKIN Corporation assum es no responsibility for any
errors which m ay appear in this docum ent.
NEC/TOKIN Corporation does not assum e any liability for infringem ent of patents, copyrights or other
intellectual property rights of third parties by or arising from use of a device described herein or any
other liability arising from use of such device. No license, either express, im plied or otherwise, is granted
under any patents, copyrights or other intellectual property rights of NEC/TOKIN Corporation or others.
While NEC/TOKIN Corporation has been m aking continuous effort to enhance the reliability of its electronic
com ponents, the possibility of defects cannot be elim inated entirely. To m inim ize risks of dam age or
injury to persons or property arising from a defect in an NEC/TOKIN electronic com ponent, custom ers
m ust incorporate sufficient safety m easures in its design, such as redundancy, fire-containm ent, and
anti-failure features. NEC/TOKIN devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based
on a custom er designated "quality assurance program " for a specific application. The recom m ended
applications of a device depend on its quality grade, as indicated below. Custom ers m ust check the
quality grade of each device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipm ent, hom e electronic appliances, m achine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
system s, anti-crim e system s, safety equipm ent and m edical equipm ent (not specifically de-
signed for life support)
Specific: Aircrafts, aerospace equipm ent, subm ersible repeaters, nuclear reactor control system s, life
support systems or medical equipment for life support, etc.
The quality grade of NEC/TOKIN devices is "Standard" unless otherwise specified in NEC/TOKIN's Data Sheets
or Data Books. If customers intend to use NEC/TOKIN devices for applications other than those specified for
Standard quality grade, they should contact an NEC/TOKIN sales representative in advance.
(Note)
(1) "NEC/TOKIN" as used in this statement means NEC/TOKIN Corporation and also includes its majority-
owned subsidiaries.
(2) "NEC/TOKIN electronic component products" means any electronic component product developed or manu-
factured by or for NEC/TOKIN (as defined above).
DE0202
Printed on recycled paper
相关型号：
©2020 ICPDF网 联系我们和版权申明