PS2911-1-L [NEC]
Transistor Output Optocoupler, 1-Element, 2500V Isolation;型号: | PS2911-1-L |
厂家: | NEC |
描述: | Transistor Output Optocoupler, 1-Element, 2500V Isolation |
文件: | 总8页 (文件大小:44K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY DATA SHEET
PHOTOCOUPLER
PS2911-1
HIGH CTR, 4-PIN ULTRA SMALL PACKAGE
FLAT-LEAD PHOTOCOUPLER
−NEPOCTM Series−
DESCRIPTION
The PS2911-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor in one package for high density mounting applications.
An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30%
compared with the PS28xx series.
FEATURES
•
•
•
•
Small and thin package (4.9 (L) × 2.5 (W) × 2.1 (H) mm)
High current transfer ratio (CTR = 200 % TYP. @ I
High isolation voltage (BV = 2 500 Vr.m.s.)
F
= 1 mA, VCE = 5 V)
Ordering number of taping product: PS2911-1-F3, F4: 3 500 pcs/reel
APPLICATIONS
•
•
DC/DC converter
Modem/PC card
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P14802EJ2V0DS00 (2nd edition)
Date Published August 2000 NS CP(K)
Printed in Japan
The mark • shows major revised points.
2000
©
PS2911-1
PACKAGE DIMENSIONS (in millimeters)
TOP VIEW
2.5±0.3
4
3
4
3
1. Anode
2. Cathode
3. Emitter
4. Collector
N
1
2
4.9±0.3
4.5±0.2
1
2
0.4±0.1
1.27
MARKING
Last number of
type No. : 11
11
An initial of "NEC"
Assembly lot
N
001
No. 1 pin
mark
(knicked
corner)
01
0
Week assembled
Year assembled
2
Preliminary Data Sheet P14802EJ2V0DS00
PS2911-1
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance
Unit (MIN.)
5 mm
Creepage Distance
Isolation Distance
5 mm
0.4 mm
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
Unit
mA
Diode
Forward Current
50
Reverse Voltage
VR
6
V
Power Dissipation Derating
∆PD/°C
PD
0.6
mW/°C
mW
A
Power Dissipation
60
Peak Forward Current*1
IFP
1
Transistor Collector to Emitter Voltage
Emitter to Collector Voltage
Collector Current
VCEO
VECO
IC
40
V
5
40
V
mA
Power Dissipation Derating
∆PC/°C
PC
1.2
mW/°C
mW
Vr.m.s.
mW
°C
Power Dissipation
120
Isolation Voltage*2
BV
2 500
160
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
PT
TA
−55 to +100
−55 to +150
Tstg
°C
*1 PW = 100 µs, Duty Cycle = 1 %
*2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output
3
Preliminary Data Sheet P14802EJ2V0DS00
PS2911-1
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter
Symbol
VF
Conditions
MIN.
TYP.
1.1
MAX.
1.4
5
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IF = 5 mA
VR = 5 V
IR
µA
pF
nA
%
Ct
V = 0 V, f = 1 MHz
IF = 0 mA, VCE = 40 V
IF = 1 mA, VCE = 5 V
30
Transistor Collector to Emitter Current
ICEO
CTR
100
400
Coupled
Current Transfer Ratio
(IC/IF)*1
100
1011
200
Collector Saturation Voltage
Isolation Resistance
Isolation Capacitance
Rise Time*2
VCE (sat)
RI-O
CI-O
tr
IF = 1 mA, IC = 0.2 mA
VI-O = 1 kVDC
0.3
V
Ω
V = 0 V, f = 1 MHz
0.4
4
pF
µs
VCC = 5 V, IC = 2 mA, RL = 100 Ω
Fall Time*2
tf
5
*1 CTR rank
N : 100 to 400 (%)
K : 200 to 400 (%)
L : 150 to 300 (%)
M: 100 to 200 (%)
*2 Test circuit for switching time
Pulse Input
V
V
CC
PW = 100 µs
Duty cycle = 1/10
I
F
In monitor
OUT
50 Ω
RL = 100 Ω
4
Preliminary Data Sheet P14802EJ2V0DS00
PS2911-1
[MEMO]
5
Preliminary Data Sheet P14802EJ2V0DS00
PS2911-1
[MEMO]
6
Preliminary Data Sheet P14802EJ2V0DS00
PS2911-1
[MEMO]
7
Preliminary Data Sheet P14802EJ2V0DS00
PS2911-1
CAUTION
Within this device there exists GaAs (Gallium Arsenide) material which is a
harmful substance if ingested. Please do not under any circumstances break the
hermetic seal.
NEPOC is a trademark of NEC Corporation.
•
The information in this document is current as of August, 2000. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
•
•
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
•
•
•
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
©2020 ICPDF网 联系我们和版权申明