PS8101-F3-N [NEC]
Linear IC Output Optocoupler, 1-Element, 2500V Isolation, 1MBps, PLASTIC, SOP-5;型号: | PS8101-F3-N |
厂家: | NEC |
描述: | Linear IC Output Optocoupler, 1-Element, 2500V Isolation, 1MBps, PLASTIC, SOP-5 |
文件: | 总11页 (文件大小:72K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
PHOTOCOUPLER
PS8101
1 Mbps HIGH CMR ANALOG OUTPUT TYPE
5-PIN SOP PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS8101 is an optically coupled isolator containing a GaAlAs LED on the light emitting diode (input side) and a
PIN photodiode and a high-speed amplifier transistor on the output side on one chip.
This is a plastic SOP (Small Out-line Package) type for high density applications.
FEATURES
•
•
•
•
•
•
Wave soldering (260°C, 10 s, One)
High common mode transient immunity (CMH, CML = ±10 kV/µs MIN.)
High supply voltage (VCC = 35 V)
High isolation voltage (BV = 2 500 Vr.m.s.)
High-speed response (tPHL = 0.8 µs MAX., tPLH = 1.2 µs MAX.)
Ordering number of taping product: PS8101-F3, F4: 2 500 pcs/reel
APPLICATIONS
•
•
•
•
Computer and peripheral manufactures
General purpose inverter
Substitutions for relays and pulse transformers
Power supply
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
Document No. PN10260EJ01V0DS (1st edition)
Date Published February 2003 CP(K)
Printed in Japan
NEC Compound Semiconductor Devices 2003
PS8101
PACKAGE DIMENSIONS (UNIT: mm)
+0.3
3.4
–0.1
TOP VIEW
5
1
4
3
1. Anode
2. Cathode
3. GND
4. VO
5. VCC
2
7.0±0.3
4.4
0.5±0.3
1.27
+0.10
0.25 M
0.4
–0.05
MARKING EXAMPLE
8101
N234
Assembly Lot
No. 1 pin Mark
Initial of NEC
N
(Engraved mark)
N
2
34
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
2
Data Sheet PN10260EJ01V0DS
PS8101
ORDERING INFORMATION
Part Number
Package
Packing Style
Application Part
Number*1
PS8101
5-pin SOP
20 pcs (Tape 20 pcs cut)
PS8101
PS8101-F3
PS8101-F4
Embossed Tape 2 500 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
Unit
mA
V
Diode
Forward Current
Reverse Voltage
Power Dissipation*1
Supply Voltage
Output Voltage
Output Current
Power Dissipation*2
25
VR
5.0
45
PD
mW
V
Detector
VCC
VO
35
35
V
IO
8.0
mA
mW
Vr.m.s.
°C
PC
100
Isolation Voltage*3
BV
TA
2 500
–55 to +100
–55 to +125
Operating Ambient Temperature
Storage Temperature
Tstg
°C
*1 Reduced to 0.45 mW/°C at TA = 25°C or more.
*2 Reduced to 1.00 mW/°C at TA = 25°C or more.
*3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output.
3
Data Sheet PN10260EJ01V0DS
PS8101
ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
Parameter
Symbol
Conditions
MIN.
TYP.
1.7
MAX.
2.2
Unit
V
Diode
Forward Voltage
Reverse Current
VF
IR
IF = 16 mA
VR = 3 V
10
µA
Forward Voltage
Temperature Coefficient
∆VF/∆T IF = 16 mA
−2.1
mV/°C
Terminal Capacitance
High Level Output Current
High Level Output Current
Low Level Output Voltage
Low Level Supply Current
High Level Supply Current
Current Transfer Ratio*1
Isolation Resistance
Ct
IOH (1)
IOH (2)
VOL
V = 0 V, f = 1 MHz
30
3
pF
nA
µA
V
Detector
IF = 0 mA, VCC = VO = 5.5 V
500
100
0.4
IF = 0 mA, VCC = VO = 30 V
IF = 16 mA, VCC = 4.5 V, IO = 1.2 mA
IF = 16 mA, VO = open, VCC = 30 V
IF = 0 mA, VO = open, VCC = 30 V
IF = 16 mA, VCC = 4.5 V, VO = 0.4 V
VI-O = 1 kVDC, RH = 40 to 60 %
V = 0 V, f = 1 MHz
0.1
50
ICCL
µA
ICCH
0.01
20
2
Coupled
CTR
RI-O
15
35
%
Ω
1011
Isolation Capacitance
CI-O
0.4
0.5
pF
µs
Propagation Delay Time
IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ,
CL = 15 pF
tPHL
0.8
1.2
(H → L)*2
Propagation Delay Time
tPLH
0.6
(L → H)*2
Common Mode
IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
CMH
10
kV/µs
Transient Immunity at
High Level Output*3
Common Mode
IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
CML
−10
Transient Immunity at
Low Level Output*3
*1 CTR rank
K : 20 to 35 (%)
N : 15 to 35 (%)
4
Data Sheet PN10260EJ01V0DS
PS8101
*2 Test circuit for propagation delay time
Input
V
CC = 5 V
50 %
Pulse input
0.1 µF
R
L
= 2.2 kΩ
(Pulse width = 100 µs,
Duty cycle = 1/10)
VO (Monitor)
5 V
CL = 15 pF
Output
Input
(Monitor)
1.5 V
47 Ω
VOL
t
PHL
t
PLH
CL is approximately 15 pF which includes probe and stray wiring capacitance
*3 Test circuit for common mode transient immunity
1.5 kV
90 %
10 %
VCM
VCC = 5 V
RL = 4.1 kΩ
VO (Monitor)
IF
0 V
0.1 µF
tr
tf
VO
5 V
(IF = 0 mA)
2 V
0.8 V
VOL
VCM
VO
(IF = 16 mA)
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
5
Data Sheet PN10260EJ01V0DS
PS8101
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
TRANSISTOR POWER DISSIPATION vs.
AMBIENT TEMPERATURE
50
40
30
20
10
120
100
80
60
40
20
0
25
50
75
100
0
25
50
75
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
HIGH LEVEL OUTPUT CURRENT vs.
AMBIENT TEMPERATURE
100
10
1 000
100
10
IF = 0 mA
TA = +100 ˚C
+50 ˚C
+25 ˚C
VCC = VO = 30 V
VCC = VO = 5.5 V
1
0 ˚C
–25 ˚C
0.1
0.01
1
0.1
–25
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0
25
50
75
100
Forward Voltage VF (V)
Ambient Temperature TA (˚C)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
80
70
60
50
40
30
20
10
0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
VCC = 4.5 V,
VO = 0.4 V
Normalized to 1.0
at TA = 25 ˚C, IF = 16 mA,
VCC = 4.5 V, VO = 0.4 V
0.2
0.0
0.5
1
5
10
50
–50
–25
0
25
50
75
100
Forward Current IF (mA)
Ambient Temperature TA (˚C)
6
Data Sheet PN10260EJ01V0DS
PS8101
OUTPUT CURRENT vs.
OUTPUT VOLTAGE
OUTPUT VOLTAGE vs.
FORWARD CURRENT
10
8
6
5
4
3
2
1
IF = 25 mA
20 mA
6
15 mA
4
RL = 2.2 kΩ
10 mA
5 mA
2
5.6 kΩ
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20
Output Voltage VO (V)
Forward Current IF (mA)
PROPAGATION DELAY TIME vs.
FORWARD CURRENT
PROPAGATION DELAY TIME vs.
LOAD RESISTANCE
3.0
2.0
1.0
10
VCC = 5 V,
RL = 2.2 kΩ
VCC = 5 V,
IF = 16 mA
µ
µ
tPLH
1
tPHL
tPHL
tPLH
0.1
0
5
10
15
20
25
1 k
10 k
100 k
Forward Current IF (mA)
Load Resistance RL (Ω)
NORMALIZED PROPAGATION DELAY TIME
vs. AMBIENT TEMPERATURE
5
Normalized to 1.0
at TA = 25 ˚C,
IF = 16 mA, VCC = 5 V,
RL = 2.2 kΩ
4
3
2
1
tPLH
tPHL
0
–50
–25
0
25
50
75
100
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10260EJ01V0DS
PS8101
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.0±0.05
4.0±0.1
+0.1
–0
3.45 MAX.
1.5
1.55±0.1
3.0±0.1
3.9±0.1
8.0±0.1
0.3±0.05
Taping Direction
PS8101-F4
PS8101-F3
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
φ
R 1.0
φ
φ
φ
φ21.0±0.8
13.5±1.0
17.5±1.0
11.9 to 15.4
Outer edge of
flange
Packing: 2 500 pcs/reel
8
Data Sheet PN10260EJ01V0DS
PS8101
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
9
Data Sheet PN10260EJ01V0DS
PS8101
•
The information in this document is current as of February, 2003. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
•
•
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
•
•
•
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4-0110
10
Data Sheet PN10260EJ01V0DS
PS8101
SAFETY INFORMATION ON THIS PRODUCT
The product contains gallium arsenide, GaAs.
Caution GaAs Products
GaAs vapor and powder are hazardous to human health if inhaled or ingested.
• Do not destroy or burn the product.
• Do not cut or cleave off any part of the product.
• Do not crush or chemically dissolve the product.
• Do not put the product in the mouth.
Follow related laws and ordinances for disposal. The product should be excluded from general
industrial waste or household garbage.
For further information, please contact
NEC Compound Semiconductor Devices, Ltd.
5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 E-mail: salesinfo@csd-nec.com
NEC Compound Semiconductor Devices Hong Kong Limited
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
TEL: +852-3107-7303
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120
FAX: +82-2-558-5209
http://www.ee.nec.de/
TEL: +49-211-6503-01 FAX: +49-211-6503-487
FAX: +852-3107-7309
NEC Electronics (Europe) GmbH
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
0302
相关型号:
PS8101-F4-A-N
Linear IC Output Optocoupler, 1-Element, 2500V Isolation, 1MBps, LEAD FREE, PLASTIC, SOP-5
NEC
PS8101-F4-AX-K
Linear IC Output Optocoupler, 1-Element, 3750V Isolation, 1MBps, LEAD FREE, PLASTIC, SOP-5
NEC
PS8101-V-A-K
Linear IC Output Optocoupler, 1-Element, 2500V Isolation, 1MBps, LEAD FREE, PLASTIC, SOP-5
NEC
©2020 ICPDF网 联系我们和版权申明