UPG2030TB [NEC]
NECs 1W L, S-BAND SPDT SWITCH; NEC的1W L， S波段SPDT开关
| 型号： | UPG2030TB |
| 厂家： | 
NEC |
| 描述： | NECs 1W L, S-BAND SPDT SWITCH |
| 文件： | 总9页 (文件大小：126K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEC's 1W
UPG2030TB
L, S-BAND SPDT SWITCH
DESCRIPTION
FEATURES
NEC's UPG2030TB is a GaAs MMIC L, S-band SPDT (Single
Pole Double Throw) switch for mobile phone and L, S-band
applications.
• SWITCH CONTROL VOLTAGE:
Vcont (H) = 2.7 to 3.0 V (2.8 V TYP.)
Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
This device can operate from 0.5 to 2.5 GHz, with low inser-
tion loss and high isolation.
• LOW INSERTION LOSS:
LINS1 = 0.25 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont = 2.8 V/0 V
LINS2 = 0.30 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont = 2.8 V/0 V
LINS3 = 0.35 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont = 2.8 V/0 V
This device is housed in a 6-pin super minimold package,
suitable for high-density surface mounting.
• HIGH ISOLATION:
ISL1 = = 27 dB TYP. @ f = 0.5 to 2.0 GHz, Vcont = 2.8 V/0 V
ISL2 = 24 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont = 2.8 V/0 V
• POWER HANDLING:
Pin (0.1 dB) = +27.0 dBm TYP. @ f = 2.0 GHz, Vcont = 2.8 V/0 V
Pin (1 dB) = +30.0 dBm TYP. @ f = 2.0 GHz, Vcont = 2.8 V/0 V
(Reference value)
APPLICATIONS
•
•
•
L, S-band digital cellular or cordless handsets
PCS, W-LAN, WLL and BluetoothTM etc.
Short Range Wireless
• HIGH-DENSITY SURFACE MOUNTING:
6-pin super minimold package (2.0 × 1.25 × 0.9 mm)
ORDERING INFORMATION
Part Number
Package
Marking
Supplying Form
µPG2030TB-E3
6-pin super minimold
G3P
• Embossed tape 8 mm wide
• Pin 1, 2, 3 face the perforation side of the tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: UPG2030TB
Caution
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
UPG2030TB
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
(Top View)
(Top View)
(Bottom View)
Pin No.
Pin Name
OUTPUT1
GND
1
2
3
4
5
6
3
2
1
4 3
5 2
6 1
4 4
5 5
6 6
3
2
1
OUTPUT2
VCont2
INPUT
VCont1
TRUTH TABLE
Vcont1
Vcont2
INPUT−OUTPUT1
INPUT−OUTPUT2
Low
High
Low
ON
OFF
ON
High
OFF
ABSOLUTE MAXIMUM RATINGS(TA = 25°C, unless otherwise specified)
Parameter
Switch Control Voltage
Input Power
Symbol
Vcont
Pin
Ratings
Unit
6.0
V
+33
dBm
°C
Operating Ambient Temperature
Storage Temperature
TA
−45 to +85
−55 to +150
Tstg
°C
RECOMMENDED OPERATING RANGE (TA = 25°C, unless otherwise specified)
Parameter
Switch Control Voltage (H)
Switch Control Voltage (L)
Symbol
Vcont (H)
Vcont (L)
MIN.
TYP.
2.8
0
MAX.
Unit
2.7
3.0
V
−0.2
0.2
V
UPG2030TB
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss 1
Symbol
LINS1
LINS2
LINS3
ISL1
Test Conditions
f = 0.5 to 1.0 GHz
MIN.
−
TYP.
0.25
0.30
0.35
27
MAX.
Unit
0.45
0.50
0.55
−
dB
dB
−
Insertion Loss 2
Insertion Loss 3
Isolation 1
f = 1.0 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.5 GHz
f = 0.5 to 2.5 GHz
−
dB
23
dB
−
Isolation 2
ISL2
20
24
dB
−
Input Return Loss
Output Return Loss
0.1 dB Gain Compression
Input Power Note
RLin
15
20
dB
−
RLout
15
20
dB
−
Pin (0.1 dB) f = 2.0 GHz
f = 2.5 GHz
+25.5
+25.5
+27.0
+27.0
dBm
dBm
−
−
−
Switch Control Current
Switch Control Speed
Icont
No signal
4
20
µA
tSW
50
500
ns
Note Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear
range.
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25°C, Vcont = 3.0 V/0 V, DC blocking capacitors = 51 pF, unless otherwise specified)
Parameter
Symbol
Test Conditions
f = 2.0 GHz
MIN.
TYP.
MAX.
Unit
−
−
1 dB Gain Compression
Input Power Note
Pin (1 dB)
+30.0
dBm
Note Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear
range.
Caution It is necessary to use DC blocking capacitors with the device.
The value of DC blocking capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of recommended
DC blocking capacitor value is less than 100 pF.
UPG2030TB
EVALUATION CIRCUIT (Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF)
OUTPUT2
OUTPUT1
56 pF
56 pF
1
6
2
3
5
4
56 pF
1 000 pF
1 000 pF
Vcont1 INPUT Vcont2
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4-277
UPG2030TB
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
Vcont1
6pin SMM SPDT SW
Vc1
OUTPUT1
OUT 1
C2
C1
C3
INPUT
C1
C1
IN
C2
OUT 2
OUTPUT2
Vc2
Vcont2
USING THE NEC EVALUATION BOARD
Symbol
C1, C2, C3
C4, C5
Values
56 pF
1 000 pF
UPG2030TB
TYPICAL CHARACTERISTICS
(TA = 25ºC, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified)
INPUT–OUTPUT1
INSERTION LOSS vs. FREQUENCY
INPUT–OUTPUT2
INSERTION LOSS vs. FREQUENCY
0.5
0.4
0.3
0.2
0.1
0
0.5
0.4
0.3
0.2
0.1
0
–0.1
–0.2
–0.1
–0.2
–0.3
–0.4
–0.5
–0.3
–0.4
–0.5
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
Frequency f (GHz)
Frequency f (GHz)
INPUT–OUTPUT1
INPUT–OUTPUT2
ISOLATION vs. FREQUENCY
ISOLATION vs. FREQUENCY
50
50
40
30
40
30
20
20
10
10
0
0
–10
–20
–30
–10
–20
–30
–40
–50
–40
–50
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
Frequency f (GHz)
Frequency f (GHz)
INPUT–OUTPUT1
INPUT RETURN LOSS vs. FREQUENCY
INPUT–OUTPUT2
INPUT RETURN LOSS vs. FREQUENCY
50
50
40
30
40
30
20
20
10
10
0
0
–10
–20
–30
–10
–20
–30
–40
–50
–40
–50
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
Frequency f (GHz)
Frequency f (GHz)
Remark The graphs indicate nominal characteristics.
UPG2030TB
INPUT–OUTPUT1
INPUT–OUTPUT2
OUTPUT RETURN LOSS vs. FREQUENCY
OUTPUT RETURN LOSS vs. FREQUENCY
50
50
40
40
30
30
20
20
10
10
0
0
–10
–20
–30
–40
–10
–20
–30
–40
–50
–50
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
Frequency f (GHz)
Frequency f (GHz)
OUTPUT POWER vs. INPUT POWER
OUTPUT POWER vs. INPUT POWER
33
33
f = 1.0 GHz
f = 2.5 GHz
31
31
29
27
25
23
21
19
29
27
25
23
21
19
17
15
17
15
13
13
15 17 19 21 23 25 27 29 31 33 35
15 14 19 21 23 25 27 29 31 33
35
Input Power Pin (dBm)
Input Power Pin (dBm)
Remark The graphs indicate nominal characteristics.
UPG2030TB
PACKAGE DIMENSIONS
6-PIN SUPER MINIMOLD (UNIT: mm)
2.1±0.1
1.25±0.1
0.1 MIN.
UPG2030TB
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature (package surface temperature)
Time at peak temperature
: 260°C or below
: 10 seconds or less
: 60 seconds or less
: 120±30 seconds
: 3 times
IR260
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
VPS
Peak temperature (package surface temperature)
Time at temperature of 200°C or higher
Preheating time at 120 to 150°C
: 215°C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
VP215
WS260
HS350
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Wave Soldering
Partial Heating
Peak temperature (molten solder temperature)
Time at peak temperature
: 260°C or below
: 10 seconds or less
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (pin temperature)
: 350°C or below
Soldering time (per side of device)
: 3 seconds or less
: 0.2%(Wt.) or below
Maximum chlorine content of rosin flux (% mass)
Caution Do not use different soldering methods together (except for partial heating).
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
02/18/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
相关型号：
©2020 ICPDF网 联系我们和版权申明