HS-A292C-FREQ [NEL]

Differential Positive ECL (DPECL) Fast Edge; 差分正ECL ( DPECL )快速边沿
HS-A292C-FREQ
型号: HS-A292C-FREQ
厂家: NEL FREQUENCY CONTROLS,INC    NEL FREQUENCY CONTROLS,INC
描述:

Differential Positive ECL (DPECL) Fast Edge
差分正ECL ( DPECL )快速边沿

文件: 总2页 (文件大小:262K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Data Sheet 9734D  
CRYSTAL CLOCK OSCILLATORS  
Rev. J  
Differential Positive ECL (DPECL)  
Fast Edge  
HS-2920 Series  
Description  
The HS-2920 Series of quartz crystal oscillators provide DPECL Fast Edge compatible signals in industry  
standard four-pin DIP hermetic packages. Systems designers may now specify space-saving, cost-  
effective packaged PECL oscillators to meet their timing requirements.  
Features  
• Wide frequency range–50.0MHz to 200.000MHz  
• User specified tolerance available  
• Low Jitter  
• Overtone technology  
• Will withstand vapor phase temperatures of 253°C • High Q Crystal actively tuned oscillator circuit  
for 4 minutes maximum  
• Power supply decoupling internal  
• Space-saving alternative to discrete component  
oscillators  
• High shock resistance, to 3000g  
• Metal lid electrically connected to ground to  
reduce EMI  
• No internal PLL avoids cascading PLL problems  
• High frequencies due to proprietary design  
• Gold plated leads - Solder dipped leads available  
upon request  
• RoHS Compliant, Lead Free Construction  
(unless solder dipped leads are supplied)  
• Fast rise and fall times <600 ps  
Electrical Connection  
Pin  
Connection  
1
7
8
Output Complement  
VEE /Ground  
Output  
14  
VCC  
Dimensions are in inches and (MM)  
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881  
Email: nelsales@nelfc.com www.nelfc.com  
Data Sheet 9734D  
CRYSTAL CLOCK OSCILLATORS  
Rev. J  
HS-2920 Series Continued  
Differential Positive ECL (DPECL) Fast Edge  
Operating Conditions and Output Characteristics  
Electrical Characteristics  
Parameter  
Frequency  
Symbol  
-----  
-----  
VOL  
VOH  
Conditions  
-----  
@ VCC-1.29V  
-----  
Min  
Typical  
Max  
50.0MHz  
45/55%  
1.35V  
2.28V  
-----  
-----  
-----  
-----  
-----  
-----  
-----  
-----  
200.0MHz  
55/45%  
1.70V  
Duty Cycle  
Logic 0 (2)  
Logic 1(2)  
-----  
2.56V  
Rise & Fall Time  
tr,tf 20-80%VO with 50 ohm load to VCC-2V -----  
600 psec  
+200 psec  
5 psec  
Tpd (4)  
-----  
-----  
dF/F  
-----  
-----  
-200 psec  
-----  
-100ppm  
Jitter, RMS(3)  
Frequency Stability (1)  
Overall conditions including:  
voltage, calibration, temp.,  
10 yr aging, shock, vibration  
+100ppm  
General Characteristics  
Parameter  
Supply Voltage  
Supply Current  
Symbol  
VCC  
ICC  
Conditions  
-----  
50 ohm termination  
To 2.00V below VCC  
Min  
4.75V  
0.0 mA  
Typical  
5.0V  
-----  
Max  
5.25V  
80 mA  
Output current  
IO  
Low level Output Current 0.0 mA  
-----  
-----  
-----  
-----  
-----  
±50.0 mA  
70°C  
125°C  
420 mW  
300°C  
Operating temperature  
Storage temperature  
Power Dissipation  
Lead temperature  
Load  
TA  
TS  
PD  
TL  
------  
-----  
-----  
0°C  
-55°C  
-----  
Soldering, 10 sec.  
-----  
50 Ohm to VCC-2V or Thevenin Equivalent, Bias Required  
tS ----- -----  
Start-up time  
2 ms  
10 ms  
Environmental and Mechanical Characteristics  
Mechanical Shock  
Thermal Shock  
Vibration  
Soldering Condition  
Hermetic Seal  
Per MIL-STD-202, Method 213, Condition E  
Per MIL-STD-833, Method 1011, Condition A  
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz  
300°C for 10 seconds  
Leak rate less than 1 x 10 -8 atm.cc/sec of helium  
Footnotes:  
1) Standard frequency stability (±20,±25,±50ppm & others available)  
2) VOL, VOH, referenced to ground (VEE) with VCC = 5.0V  
3) Jitter performance is frequency dependent. Please contact factory for full characterization.  
RMS jitter bandwidth of 12kHz to 20MHz.  
4) Tpd is phase shift between the falling edge of pin 8 at 2.0V and the rising edge of pin 1 at 2.01V.  
Creating a Part Number  
HS - A292X - FREQ  
Package Code  
Tolerance/Performance  
0 ±100ppm 0-70°C  
1 ±50ppm 0-70°C  
HS Leaded 4 pin (14 pin)  
SM Leaded 4 pin (14 pin ) SMD  
Gull Wing  
7 ±25ppm 0-70°C  
Input Voltage  
Code Specification  
9 Customer Specific  
A ±20ppm 0-70°C  
A
3.3V  
5V  
B ±50ppm -40 to +85°C  
C ±100ppm -40 to +85°C  
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881  
Email: nelsales@nelfc.com www.nelfc.com  

相关型号:

NEL

HS-A390

CRYSTAL CLOCK OSCILLATORS
NEL

HS-A390-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

HS-A391-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

HS-A397-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL