SR-B29B9-FREQ [NEL]

Frequency Range: 250.0 MHz-1.7 GHz; 频率范围: 250.0兆赫, 1.7千兆赫
SR-B29B9-FREQ
型号: SR-B29B9-FREQ
厂家: NEL FREQUENCY CONTROLS,INC    NEL FREQUENCY CONTROLS,INC
描述:

Frequency Range: 250.0 MHz-1.7 GHz
频率范围: 250.0兆赫, 1.7千兆赫

文件: 总2页 (文件大小:156K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Differential Positive ECL (DPECL)  
SR-A29B0  
Series  
SR-A29B0 Series Rev G  
Frequency Range: 250.0 MHz-1.7 GHz  
Description  
The SR-A29B0 Series of quartz crystal oscillators provide DPECL Fast Edge compatible  
signals. This device is to operate using positive voltage and uses multiple ground pins for  
improved signal integrity. This device is intended to operate on positive voltage for PECL  
applications.  
Features  
Size, mm  
• High Reliability - NEL HꢁLT/HꢁSS  
qualified for crystal oscillator start-up  
conditions  
• Cover connected to ground  
• 3.3V and 2.5V versions available  
• Wide frequency range – 25ꢀ.ꢀMHz to  
1.7GHz  
9 x 14  
I/O  
8 pad  
• User specified tolerance available  
• Will withstand SMD reflow temperatures of  
183°C for 4 minutes maximum  
• High shock resistance, to 1ꢀꢀꢀg  
Supply Voltage  
3.3V / 2.5V  
• Patent Pending, harmonic  
multiplication for  
Creating a Part Number  
extremely low jitter  
SR - A29BX - FREQ  
Tolerance/Performance  
• High frequency output  
eliminates the need for  
PLL multiplication  
1
7
1ꢀꢀ ppm ꢀ-7ꢀ°C  
5ꢀ ppm ꢀ-7ꢀ°C  
25 ppm ꢀ-7ꢀ°C  
Package Code  
SR  
8 pad 9x14 mm SMD  
9 Customer Specific  
Input Voltage  
• Stabilities over  
B
C
2ꢀ ppm ꢀ-7ꢀ°C  
5ꢀ ppm -4ꢀ to ꢂ85°C  
1ꢀꢀ ppm -4ꢀ to ꢂ85°C  
Code  
Specification  
3.3 V  
2.5 V  
temperatures as low as  
2ꢀppm eliminates SW  
oscillator temperature  
problems  
B
Drawing Specifications  
Electrical Connections  
Pin  
1
2
3
4
5
6
7
8
Connection  
VCC  
Ground  
NC or Ground  
Q Output  
/Q Output  
Ground  
Recommended Board Layout  
Dimensions shown in inches (mm).  
For the most up to date  
specifications on each NEL  
product, log on to our  
website—www.nelfc.com  
The metallic center pad was designed for  
mechanical support. Grounding of this pad is  
optional. It measures 0.088 x 0.190 NOM  
(2.24 x 4.83 NOM).  
Ground  
Enable  
357 Beloit Street, P.O. Box 457, Burlington, WI 531ꢀ5-ꢀ457 U.S.ꢁ.  
Phone: 262-763-3591 Fax: 262-763-2881 Email: nelsales@nelfc.com www.nelfc.com  
Differential Positive ECL (DPECL)  
SR-A29B0 Series Rev G  
Frequency Range: 250.0 MHz-1.7 GHz  
Operating Conditions and Output Characteristics  
Electrical Characteristics  
Parameter  
Symbol  
Conditions  
Min  
25ꢀ.ꢀMHz  
45/55%  
VCC -1.81ꢀV  
VCC -1.ꢀ25V  
ꢀV  
3.ꢀV  
-1ꢀꢀppm  
Typical  
Max  
1.7GHz  
55/45%  
VCC -1.62ꢀV  
VCC -ꢀ.88ꢀV  
6ꢀꢀ psec  
1 psec  
1.ꢀV  
VCC  
ꢂ1ꢀꢀppm  
Frequency  
Duty Cycle  
@ 5ꢀ% points  
Logic ꢀ (1)  
VOL  
VOH  
35ꢀ psec  
Logic 1(1)  
t t  
Rise & Fall Time  
RMS Random Jitter(5)  
Enable Voltage(2)  
Disable Voltage  
Frequency Stability(3)  
r, f 2ꢀ-8ꢀ%VO with 5ꢀ ohm load to VCC -2V  
with VEE=ꢀV  
with VEE=ꢀV  
dF/F  
Overall conditions including:  
voltage, calibration, temp.,  
1ꢀ yr aging, shock, vibration  
@1ꢀꢀHz  
Phase Noise(4)  
-8ꢀ dBc/Hz  
-115 dBc/Hz  
-13ꢀ dBc/Hz  
-13ꢀ dBc/Hz  
-135 dBc/Hz  
-135 dBc/Hz  
@1kHz  
@1ꢀkHz  
@1ꢀꢀkHz  
@1MHz  
@1ꢀMHz  
General Characteristics  
Parameter  
Symbol  
VCC  
Conditions  
Min  
Typical  
3.3 V  
Max  
Supply Voltage  
5ꢀ ohm termination  
to 2.ꢀꢀV below VCC  
Low level Output Current  
3.135 V  
ꢀ.ꢀ mꢁ  
3.465 V  
12ꢀ mꢁ  
Supply Current  
ICC  
Output Current  
Operating Temperature  
Storage Temperature  
IO  
Tꢁ  
TS  
ꢀ.ꢀ mꢁ  
5ꢀ.ꢀ mꢁ  
º
º
ꢀ C  
7ꢀ C  
º
º
-55 C  
125 C  
Input: Logic High (ECL) - Disables  
VEE or Open - Enables  
º
Lead Temperature  
Load  
TL  
Soldering, 1ꢀ sec.  
3ꢀꢀ C  
5ꢀ ohm to VCC -2V or Thevenin Equivalent, Bias Required  
tS  
Start-up Time  
2 ms  
1ꢀ ms  
Environmental and Mechanical Characteristics  
Mechanical Shock  
Thermal Shock  
Vibration  
Per MIL-STD-2ꢀ2, Method 213, Condition E  
Per MIL-STD-833, Method 1ꢀ11, Condition ꢁ  
ꢀ.ꢀ6ꢀ" double amplitude 1ꢀ Hz to 55 Hz, 35g’s 55 Hz to 2ꢀꢀꢀ Hz  
º
Soldering Condition 3ꢀꢀ C for 1ꢀ seconds  
Footnotes:  
1) VOL, VOH, referenced to ground.  
2) Open to enable pin also enables the output.  
3) Standard frequency stability (others available).  
4) Phase Noise characterization available. Phase Noise is frequency dependent,  
phase noise specification references a 1.ꢀGHz part.  
5) RMS jitter bandwidth of 12kHz to 2ꢀMHz.  

相关型号:

SR-B29BA-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B29BB-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B29BC-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B2A70-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B2A71-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B2A77-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B2A79-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B2A7A-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B2A7B-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL

SR-B2A7C-FREQ

Frequency Range: 250.0 MHz-1.7 GHz
NEL