74AHC1G08GW 概述
2-input AND gateProduction 逻辑芯片 栅极
74AHC1G08GW 规格参数
是否Rohs认证: | 符合 | 生命周期: | Active |
包装说明: | TSSOP, | Reach Compliance Code: | compliant |
ECCN代码: | EAR99 | HTS代码: | 8542.39.00.01 |
风险等级: | 5.05 | Is Samacsys: | N |
系列: | HC/UH | JESD-30 代码: | R-PDSO-G5 |
JESD-609代码: | e3 | 长度: | 2.05 mm |
逻辑集成电路类型: | AND GATE | 湿度敏感等级: | 1 |
功能数量: | 1 | 输入次数: | 2 |
端子数量: | 5 | 最高工作温度: | 125 °C |
最低工作温度: | -40 °C | 封装主体材料: | PLASTIC/EPOXY |
封装代码: | TSSOP | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | 峰值回流温度(摄氏度): | 260 |
传播延迟(tpd): | 16 ns | 认证状态: | Not Qualified |
座面最大高度: | 1.1 mm | 最大供电电压 (Vsup): | 5.5 V |
最小供电电压 (Vsup): | 2 V | 标称供电电压 (Vsup): | 5 V |
表面贴装: | YES | 技术: | CMOS |
温度等级: | AUTOMOTIVE | 端子面层: | Tin (Sn) |
端子形式: | GULL WING | 端子节距: | 0.65 mm |
端子位置: | DUAL | 处于峰值回流温度下的最长时间: | 30 |
宽度: | 1.25 mm | Base Number Matches: | 1 |
74AHC1G08GW 数据手册
通过下载74AHC1G08GW数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载74AHC1G08; 74AHCT1G08
2-input AND gate
Rev. 8 — 11 January 2022
Product data sheet
1. General description
The 74AHC1G08; 74AHCT1G08 is a single 2-input AND gate. Inputs are overvoltage tolerant. This
feature allows the use of these devices as translators in mixed voltage environments.
2. Features and benefits
•
Wide supply voltage range from 2.0 to 5.5 V
•
•
•
•
•
•
•
Overvoltage tolerant inputs to 5.5 V
High noise immunity
CMOS low power dissipation
Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
Symmetrical output impedance
Balanced propagation delays
Input levels:
•
•
For 74AHC1G08: CMOS level
For 74AHCT1G08: TTL level
•
ESD protection:
•
•
•
HBM JESD22-A114E: exceeds 2000 V
MM JESD22-A115-A: exceeds 200 V
CDM JESD22-C101C: exceeds 1000 V
•
Specified from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
-40 °C to +125 °C
Name
Description
Version
74AHC1G08GW
74AHCT1G08GW
74AHC1G08GV
74AHCT1G08GV
TSSOP5
plastic thin shrink small outline package;
5 leads; body width 1.25 mm
SOT353-1
-40 °C to +125 °C
SC-74A
plastic surface-mounted package; 5 leads
SOT753
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
4. Marking
Table 2. Marking codes
Type number
Marking[1]
74AHC1G08GW
74AHC1G08GV
74AHCT1G08GW
74AHCT1G08GV
AE
A08
CE
C08
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
A
1
2
1
2
B
A
&
4
Y
4
Y
B
mna113
mna114
mna221
Fig. 1. Logic symbol
Fig. 2. IEC logic symbol
Fig. 3. Logic diagram
6. Pinning information
6.1. Pinning
74AHC1G08
74AHCT1G08
1
2
3
5
4
B
A
V
CC
GND
Y
001aaf100
Fig. 4. Pin configuration SOT353-1 (TSSOP5) and SOT753 (SC-74A)
6.2. Pin description
Table 3. Pin description
Symbol
Pin
1
Description
data input
B
A
2
data input
GND
Y
3
ground (0 V)
data output
supply voltage
4
VCC
5
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
2 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
7. Functional description
Table 4. Function table
H = HIGH voltage level; L = LOW voltage level
Inputs
Output
A
L
B
L
Y
L
L
L
H
L
H
L
H
H
H
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VCC
VI
Parameter
Conditions
Min
-0.5
-0.5
-20
-
Max
+7.0
+7.0
-
Unit
V
supply voltage
input voltage
V
IIK
input clamping current
output clamping current
output current
VI < -0.5 V
mA
mA
mA
mA
mA
°C
IOK
VO < -0.5 V or VO > VCC + 0.5 V
-0.5 V < VO < VCC + 0.5 V
[1]
[2]
±20
±25
75
IO
-
ICC
supply current
-
IGND
Tstg
Ptot
ground current
-75
-65
-
-
storage temperature
total power dissipation
+150
250
Tamb = -40 °C to +125 °C
mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SOT353-1 (TSSOP5) package: Ptot derates linearly with 3.3 mW/K above 74 °C.
For SOT753 (SC-74A) package: Ptot derates linearly with 3.8 mW/K above 85 °C.
9. Recommended operating conditions
Table 6. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
74AHC1G08
74AHCT1G08
Unit
Min
2.0
0
Typ
Max
5.5
Min
4.5
0
Typ
Max
5.5
VCC
VI
supply voltage
input voltage
5.0
5.0
V
V
V
-
5.5
-
5.5
VO
output voltage
ambient temperature
0
-
VCC
+125
100
20
0
-
VCC
Tamb
Δt/ΔV
-40
-
+25
-40
-
+25
+125 °C
input transition rise and VCC = 3.3 V ± 0.3 V
fall rate
-
-
-
-
-
ns/V
ns/V
VCC = 5.0 V ± 0.5 V
-
-
20
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
3 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
10. Static characteristics
Table 7. Static characteristics
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
25 °C
Min Typ Max
-40 °C to +85 °C -40 °C to +125 °C Unit
Min
Max
Min
Max
74AHC1G08
VIH
HIGH-level
input voltage
VCC = 2.0 V
VCC = 3.0 V
VCC = 5.5 V
VCC = 2.0 V
VCC = 3.0 V
VCC = 5.5 V
VI = VIH or VIL
1.5
-
-
-
-
-
-
-
-
1.5
-
-
1.5
-
-
V
V
V
V
V
V
2.1
2.1
2.1
3.85
-
3.85
-
3.85
-
VIL
LOW-level
input voltage
-
-
-
0.5
0.9
1.65
-
-
-
0.5
0.9
1.65
-
-
-
0.5
0.9
1.65
VOH
HIGH-level
output voltage
IO = -50 μA; VCC = 2.0 V
1.9
2.9
4.4
2.0
3.0
4.5
-
-
-
-
-
-
1.9
2.9
-
-
-
-
-
1.9
2.9
-
-
-
-
-
V
V
V
V
V
IO = -50 μA; VCC = 3.0 V
IO = -50 μA; VCC = 4.5 V
4.4
4.4
IO = -4.0 mA; VCC = 3.0 V 2.58
IO = -8.0 mA; VCC = 4.5 V 3.94
2.48
3.8
2.40
3.70
-
VOL
LOW-level
VI = VIH or VIL
output voltage
IO = 50 μA; VCC = 2.0 V
-
-
-
-
-
-
0
0
0
-
0.1
0.1
-
-
-
-
-
-
0.1
0.1
-
-
-
-
-
-
0.1
0.1
V
IO = 50 μA; VCC = 3.0 V
IO = 50 μA; VCC = 4.5 V
IO = 4.0 mA; VCC = 3.0 V
IO = 8.0 mA; VCC = 4.5 V
V
0.1
0.1
0.1
V
0.36
0.36
0.1
0.44
0.44
1.0
0.55
0.55
2.0
V
-
V
II
input leakage VI = 5.5 V or GND;
current VCC = 0 V to 5.5 V
-
μA
ICC
CI
supply current VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
-
1.0
10
-
-
10
10
-
-
40
10
μA
pF
input
1.5
capacitance
74AHCT1G08
VIH
HIGH-level
input voltage
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
2.0
-
-
-
-
2.0
-
-
2.0
-
-
V
V
VIL
LOW-level
0.8
0.8
0.8
input voltage
VOH
HIGH-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = -50 μA
4.4
4.5
-
-
-
4.4
3.8
-
-
4.4
-
-
V
V
IO = -8.0 mA
3.94
3.70
VOL
LOW-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = 50 μA
-
-
-
0
-
0.1
0.36
0.1
-
-
-
0.1
0.44
1.0
-
-
-
0.1
0.55
2.0
V
IO = 8.0 mA
V
II
input leakage VI = 5.5 V or GND;
current VCC = 0 V to 5.5 V
-
μA
ICC
supply current VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
1.0
-
10
-
40
μA
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
4 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
Symbol Parameter
Conditions
25 °C
Min Typ Max
-40 °C to +85 °C -40 °C to +125 °C Unit
Min
Max
Min
Max
ΔICC
additional
per input pin; VI = 3.4 V;
-
-
1.35
-
1.5
-
1.5
mA
pF
supply current other inputs at VCC or GND;
IO = 0 A; VCC = 5.5 V
CI
input
-
1.5
10
-
10
-
10
capacitance
11. Dynamic characteristics
Table 8. Dynamic characteristics
GND = 0 V; tr = tf = ≤ 3.0 ns. For test circuit see Fig. 6.
Symbol Parameter Conditions
74AHC1G08
25 °C
-40 °C to +85 °C -40 °C to +125 °C Unit
Min Typ Max
Min
Max
Min
Max
tpd
propagation A and B to Y; see Fig. 5
[1]
[2]
delay
VCC = 3.0 V to 3.6 V
CL = 15 pF
CL = 50 pF
-
-
4.6
8.8
1.0
1.0
10.5
14.0
1.0
1.0
12.0
16.0
ns
ns
6.5 12.3
VCC = 4.5 V to 5.5 V
CL = 15 pF
[3]
[4]
-
-
-
3.2
4.6
17
5.9
7.9
-
1.0
1.0
-
7.0
9.0
-
1.0
1.0
-
8.0
10.5
-
ns
ns
pF
CL = 50 pF
CPD
power
CL = 50 pF; f = 1 MHz;
dissipation VI = GND to VCC
capacitance
74AHCT1G08
tpd
propagation A and B to Y; see Fig. 5
[1]
[3]
delay
VCC = 4.5 V to 5.5 V
CL = 15 pF
-
-
-
3.6
5.1
19
6.2
7.9
-
1.0
1.0
-
7.1
9.0
-
1.0
1.0
-
8.0
10.5
-
ns
ns
pF
CL = 50 pF
CPD
power
CL = 50 pF; f = 1 MHz;
[4]
dissipation VI = GND to VCC
capacitance
[1] tpd is the same as tPLH and tPHL
.
[2] Typical values are measured at VCC = 3.3 V.
[3] Typical values are measured at VCC = 5.0 V.
[4] CPD is used to determine the dynamic power dissipation PD (μW).
PD = CPD × VCC 2 × fi + Σ(CL × VCC 2 × fo) where:
fi = input frequency in MHz; fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in Volts
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
5 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
11.1. Waveform and test circuit
V
A, B input
M
t
t
PLH
PHL
V
Y output
M
mna116
Measurement points are given in Table 9.
Fig. 5. Input (A and B) to output (Y) propagation delays
Table 9. Measurement point
Type
Input
Output
VM
VI
VM
74AHC1G08
GND to VCC
GND to 3.0 V
0.5 × VCC
1.5 V
0.5 × VCC
0.5 × VCC
74AHCT1G08
V
CC
V
V
O
I
PULSE
GENERATOR
DUT
C
L
R
T
mna101
Test data is given in Table 8. Definitions for test circuit:
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
Fig. 6. Test circuit for measuring switching times
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
6 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
12. Package outline
TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm
SOT353-1
D
B
E
A
X
c
(5x)
y
H
E
v
M
A
e
1
5
4
pin 1 index
A
A
2
A
1
1
2
3
A
3
θ
L
w
M B
p
b
p
(5x)
detail X
e
e
0
3 mm
scale
Dimensions (mm are the original dimensions)
Unit
(1)
(1)
A
A
A
A
b
c
D
E
e
e
1
H
E
L
p
v
w
y
θ
1
2
3
p
max 1.1 0.1 1.0
0.8 0.8
0.30 0.25 2.2 1.35
0.15 0.08 1.8 1.15
2.4 0.46
1.8 0.26
8°
0°
mm
0.15
0.65 1.3
0.3 0.1 0.1
0
min
Note
1. Plastic or metal protrusions of 0.2 mm maximum per side are not included.
sot353-1_po
References
Outline
version
European
projection
Issue date
IEC
JEDEC
JEITA
21-12-15
21-12-16
SOT353-1
SC-88A
MO-203
Fig. 7. Package outline SOT353-1 (TSSOP5)
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
7 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
Plastic surface-mounted package; 5 leads
SOT753
D
B
E
A
X
y
H
v
M
A
E
5
4
Q
A
A
1
c
L
p
1
2
3
detail X
b
e
w
M B
p
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A
1
b
c
D
e
H
L
Q
v
w
y
E
p
p
E
0.100
0.013
0.40
0.25
1.1
0.9
0.26
0.10
3.1
2.7
1.7
1.3
3.0
2.5
0.6
0.2
0.33
0.23
mm
0.95
0.2
0.2
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
02-04-16
06-03-16
SOT753
SC-74A
Fig. 8. Package outline SOT753 (SC-74A)
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
8 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
13. Abbreviations
Table 10. Abbreviations
Acronym
CDM
CMOS
DUT
Description
Charged Device Model
Complementary Metal-Oxide Semiconductor
Device Under Test
ESD
ElectroStatic Discharge
Human Body Model
HBM
MM
Machine Model
TTL
Transistor-Transistor Logic
14. Revision history
Table 11. Revision history
Document ID
Release date Data sheet status
20220111 Product data sheet
Change notice
Supersedes
74AHC_AHCT1G08 v.8
Modifications:
-
74AHC_AHCT1G08 v.7
•
The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
•
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Section 1 and Section 2 updated.
Fig. 7: SOT353-1 (TSSOP5) package outline drawing has changed.
Section 8: Derating values for Ptot total power dissipation updated.
74AHC_AHCT1G08 v.7
Modifications:
20141118
Section 4: table note added.
20070629 Product data sheet
Product data sheet
-
74AHC_AHCT1G08 v.6
•
74AHC_AHCT1G08 v.6
Modifications:
-
74AHC_AHCT1G08 v.5
•
The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Package SOT353 changed to SOT353-1 in Section 3 and Section 12.
Quick reference data and Soldering sections removed.
74AHC_AHCT1G08 v.5
74AHC_AHCT1G08 v.4
74AHC_AHCT1G08 v.3
74AHC_AHCT1G08 v.2
20020606
20020221
20010209
19990127
Product specification
Product specification
Product specification
Product specification
Preliminary specification
-
-
-
-
-
74AHC_AHCT1G08 v.4
74AHC_AHCT1G08 v.3
74AHC_AHCT1G08 v.2
74AHC_AHCT1G08_N v.1
-
74AHC_AHCT1G08_N v.1 19981125
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
9 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
15. Legal information
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status Product
Definition
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1][2]
status [3]
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
10 / 11
Nexperia
74AHC1G08; 74AHCT1G08
2-input AND gate
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Marking..........................................................................2
5. Functional diagram.......................................................2
6. Pinning information......................................................2
6.1. Pinning.........................................................................2
6.2. Pin description.............................................................2
7. Functional description................................................. 3
8. Limiting values............................................................. 3
9. Recommended operating conditions..........................3
10. Static characteristics..................................................4
11. Dynamic characteristics.............................................5
11.1. Waveform and test circuit.......................................... 6
12. Package outline.......................................................... 7
13. Abbreviations..............................................................9
14. Revision history..........................................................9
15. Legal information......................................................10
© Nexperia B.V. 2022. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 11 January 2022
©
74AHC_AHCT1G08
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 8 — 11 January 2022
11 / 11
74AHC1G08GW 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
74AHC1G08GV | NEXPERIA | 2-input AND gateProduction | 完全替代 | |
74AHC1G08GW,125 | NXP | 74AHC(T)1G08 - 2-input AND gate TSSOP 5-Pin | 类似代替 | |
TC7SH08FU(TE85L,F) | TOSHIBA | IC LV/LV-A/LVX/H SERIES, 2-INPUT AND GATE, PDSO5, 0.65 MM PITCH, PLASTIC, SSOP-5, Gate | 功能相似 |
74AHC1G08GW 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
74AHC1G08GW,125 | NXP | 74AHC(T)1G08 - 2-input AND gate TSSOP 5-Pin | 获取价格 | |
74AHC1G08GW,132 | NXP | AND Gate, HC/UH Series, 1-Func, 2-Input, CMOS, PDSO5 | 获取价格 | |
74AHC1G08GW,165 | NXP | 74AHC(T)1G08 - 2-input AND gate TSSOP 5-Pin | 获取价格 | |
74AHC1G08GW-G | NXP | 2-input AND gate | 获取价格 | |
74AHC1G08GW-Q100 | NXP | AHC/VHC/H/U/V SERIES, 2-INPUT AND GATE, PDSO5, 1.25 MM, PLASTIC, MO-203, SC-88A, SOT353-1,TSSOP-5 | 获取价格 | |
74AHC1G08GW-Q100 | NEXPERIA | 2-input AND gate | 获取价格 | |
74AHC1G08GW-Q100,1 | NXP | 74AHC(T)1G08-Q100 - 2-input AND gate TSSOP 5-Pin | 获取价格 | |
74AHC1G08GW-T | NXP | HC/UH SERIES, 2-INPUT AND GATE, PDSO5 | 获取价格 | |
74AHC1G08GW/C,125 | NXP | 74AHC(T)1G08 - 2-input AND gate TSSOP 5-Pin | 获取价格 | |
74AHC1G08GW/T1 | ETC | IC-SM-CMOS LOGIC | 获取价格 |
74AHC1G08GW 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6