CBT3257APW-Q100 [NEXPERIA]
Quad 1-of-2 multiplexer/demultiplexerProduction;型号: | CBT3257APW-Q100 |
厂家: | Nexperia |
描述: | Quad 1-of-2 multiplexer/demultiplexerProduction 逻辑集成电路 |
文件: | 总10页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
Rev. 1 — 28 November 2019
Product data sheet
1. General description
The CBT3257A-Q100 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer.
The low ON resistance of the switch allows inputs to be connected to outputs without adding
propagation delay or generating additional ground bounce noise.
Output enable (OE) and select-control (S) inputs select the appropriate nB1 and nB2 outputs for
the nA input data.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100
(Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
•
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
•
•
•
•
•
•
5 Ω switch connection between two ports
TTL-compatible input levels
Minimal propagation delay through the switch
Latch-up protection exceeds 100 mA per JEDEC standard JESD78 class II level A
ESD protection:
•
•
•
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115B exceeds 200 V (C = 200 pF, R = 0 Ω)
3. Ordering information
Table 1. Ordering information
Type number
Temperature range Package
Name
Description
Version
CBT3257APW-Q100 -40 °C to +125 °C
TSSOP16
plastic thin shrink small outline package;
16 leads; body width 4.4 mm
SOT403-1
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
4. Functional diagram
4
7
2
1A
1B1
3
1B2
5
2A
3A
4A
2B1
6
2B2
9
11
3B1
10
3B2
12
14
4B1
13
4B2
1
S
15
OE
002aab779
Fig. 1. Logic diagram
5. Pinning information
5.1. Pinning
CBT3257A
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
S
1B1
1B2
1A
V
CC
OE
4B1
4B2
4A
2B1
2B2
2A
3B1
3B2
3A
GND
001aai365
Fig. 2. Pin configuration SOT403-1 (TSSOP16)
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
2 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
5.2. Pin description
Table 2. Pin description
Symbol
Pin
Description
S
1
select control input
B1 outputs/inputs
B2 outputs/inputs
A inputs/outputs
1B1, 2B1, 3B1, 4B1,
2, 5, 11, 14
1B2, 2B2, 3B2, 4B2
3, 6, 10, 13
1A, 2A, 3A, 4A
4, 7, 9, 12
GND
OE
8
ground (0 V)
15
16
output enable (active LOW)
positive supply voltage
VCC
6. Functional description
Table 3. Function selection
H = HIGH voltage level; L = LOW voltage level; X = Don’t care.
Inputs
Switch
OE
L
S
L
nA to nB1
nA to nB2
switch off
L
H
X
H
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
-0.5
-0.5
-
Max
+7.0
+7.0
128
-
Unit
V
VCC
VI
supply voltage
input voltage
[1]
[2]
V
ISW
IIK
switch current
continuous current through each switch
VI < 0 V
mA
mA
°C
input clamping current
storage temperature
total power dissipation
-50
-65
-
Tstg
Ptot
+150
500
Tamb = -40 °C to +125 °C
mW
[1] The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
[2] For SOT403-1 package: Ptot derates linearly at 8.5 mW/K above 91 °C.
8. Recommended operating conditions
Table 5. Operating conditions
All unused control inputs of the device must be held at VCC or GND to ensure proper device operation.
Symbol
VCC
Parameter
Conditions
Min
4.5
2.0
-
Max
5.5
-
Unit
supply voltage
V
VIH
HIGH-level input voltage
LOW-level input voltage
ambient temperature
V
VIL
0.8
+125
V
Tamb
operating in free-air
-40
°C
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
3 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
9. Static characteristics
Table 6. Static characteristics
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Tamb = -40 °C to +85 °C Tamb = -40 °C to +125 °C Unit
Min
Typ[1]
Max
Min
Max
VIK
input
VCC = 4.5 V; II = -18 mA
-
-
-1.2
-
-1.2
V
clamping
voltage
Vpass
II
pass voltage VI = VCC = 5.0 V; IO = -100 μA
3.6
-
3.9
-
4.2
±1
3.6
-
4.4
V
input leakage VCC = 5.5 V; VI = GND or 5.5 V
current
±15
μA
ICC
supply current VCC = 5.5 V; IO = 0 mA;
VI = VCC or GND
-
-
-
-
3
-
-
25
3
μA
ΔICC
additional
per input; VCC = 5.5 V; one input [2]
2.5
mA
supply current at 3.4 V, other inputs at VCC or
GND
CI
input
control pins; VI = 3 V or 0 V
-
3.3
-
-
-
pF
capacitance
Cio(off)
off-state
input/output
capacitance
A port; VO = 3 V or 0 V; OE = VCC
B port; VO = 3 V or 0 V; OE = VCC
-
-
9.9
6.4
-
-
-
-
-
-
pF
pF
RON
ON resistance VCC = 4.5 V
VI = 0 V; II = 64 mA
[3]
-
-
-
-
-
-
-
5
5
7
7
8
8
Ω
Ω
Ω
VI = 0 V; II = 30 mA
VI = 2.4 V; II = 15 mA
10
15
17
[1] All typical values are measured at VCC = 5 V; Tamb = 25 °C.
[2] This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND.
[3] Measured by the voltage drop between the nA and the nBn terminals at the indicated current through the switch. The lowest voltage of
the two (nA or nBn) terminals determines the ON resistance.
10. Dynamic characteristics
Table 7. Dynamic characteristics
VCC = 4.5 V to 5.5 V; for test circuit see Fig. 5.
Symbol Parameter Conditions
Tamb = -40 °C to +85 °C
Tamb = -40 °C to +125 °C Unit
Min
Max
Min
Max
tpd
propagation nA to nBn or nBn to nA;
[1][2]
-
0.25
-
0.3
ns
delay
see Fig. 3
S to nA; see Fig. 3
[1][2]
[2]
1.4
1.5
1.4
2.2
1.0
5.0
5.1
5.2
5.5
5.0
1.4
1.5
1.4
2.2
1.0
5.8
5.9
6.0
6.4
5.8
ns
ns
ns
ns
ns
ten
enable time OE to nA or nBn; see Fig. 4
S to nBn; see Fig. 4
[2]
tdis
disable time OE to nA or nBn; see Fig. 4
S to nBn; see Fig. 4
[2]
[2]
[1] This parameter is warranted but not production tested. The propagation delay is based on the RC time constant of the typical ON
resistance of the switch and a load capacitance, when driven by an ideal voltage source (zero output impedance).
[2] tPLH and tPHL are the same as tpd; tPZL and tPZH are the same as ten; tPLZ and tPHZ are the same as tdis
.
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
4 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
10.1. Waveforms and test circuit
V
I
V
V
M
input
0 V
M
t
t
PLH
PHL
V
OH
V
V
M
output
M
V
OL
001aai367
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig. 3. The input (nA; nBn) to output (nBn; nA) or input (S) to output (nA) propagation delay times
V
I
OE, S input
V
M
GND
t
t
PLZ
PZL
V
CC
output
LOW-to-OFF
OFF-to-LOW
V
M
V
X
V
OL
t
t
PHZ
PZH
V
OH
V
Y
output
HIGH-to-OFF
V
M
OFF-to-HIGH
GND
outputs
enabled
outputs
disabled
outputs
enabled
001aai368
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig. 4. Enable and disable times
Table 8. Measurement points
Supply voltage
VCC
Input
Output
VM
VI
VM
VX
VY
4.5 V to 5.5 V
GND to 3.0 V
1.5 V
1.5 V
VOL + 0.3 V
VOH - 0.3 V
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
5 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
t
W
V
I
90 %
negative
pulse
V
V
V
M
M
10 %
0 V
t
t
f
r
t
t
f
r
V
I
90 %
positive
pulse
V
M
M
10 %
0 V
t
W
V
EXT
R
V
CC
L
V
V
O
I
G
DUT
R
T
C
L
R
L
001aae331
Test data is given in Table 9.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig. 5. Test circuit for measuring switching times
Table 9. Test data
Supply voltage Input
Load
CL
VEXT
VCC
VI
tr, tf
RL
tPLH, tPHL
open
tPLZ, tPZL
tPHZ, tPZH
4.5 V to 5.5 V
GND to 3.0 V
≤ 2.5 ns
50 pF
500 Ω
7.0 V
open
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
6 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
11. Package outline
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
D
E
A
X
c
y
H
v
M
A
E
Z
9
16
Q
(A )
3
A
2
A
A
1
pin 1 index
θ
L
p
L
1
8
detail X
w
M
b
p
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(2)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
Q
v
w
y
Z
θ
1
2
3
p
E
p
max.
8o
0o
0.15
0.05
0.95
0.80
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
6.6
6.2
0.75
0.50
0.4
0.3
0.40
0.06
mm
1.1
0.65
1
0.2
0.13
0.1
0.25
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-18
SOT403-1
MO-153
Fig. 6. Package outline SOT403-1 (TSSOP16)
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
7 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
12. Abbreviations
Table 10. Abbreviations
Acronym
DUT
ESD
HBM
MIL
Description
Device Under Test
ElectroStatic Discharge
Human Body Model
Military
MM
Machine Model
TTL
Transistor-Transistor Logic
13. Revision history
Table 11. Revision history
Document ID
Release date
20191128
Data sheet status
Change notice
Supersedes
CBT3257A_Q100 v.1
Product data sheet
-
-
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
8 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
equipment, nor in applications where failure or malfunction of an Nexperia
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. Nexperia and its suppliers accept
no liability for inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
14. Legal information
Data sheet status
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status Product
Definition
[1][2]
status [3]
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Disclaimers
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use in automotive applications — This Nexperia product
has been qualified for use in automotive applications. Unless otherwise
agreed in writing, the product is not designed, authorized or warranted to
be suitable for use in life support, life-critical or safety-critical systems or
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
9 / 10
Nexperia
CBT3257A-Q100
Quad 1-of-2 multiplexer/demultiplexer
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Functional diagram.......................................................2
5. Pinning information......................................................2
5.1. Pinning.........................................................................2
5.2. Pin description.............................................................3
6. Functional description................................................. 3
7. Limiting values............................................................. 3
8. Recommended operating conditions..........................3
9. Static characteristics....................................................4
10. Dynamic characteristics............................................ 4
10.1. Waveforms and test circuit........................................ 5
11. Package outline.......................................................... 7
12. Abbreviations..............................................................8
13. Revision history..........................................................8
14. Legal information........................................................9
© Nexperia B.V. 2019. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 28 November 2019
©
CBT3257A_Q100
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2019. All rights reserved
Product data sheet
Rev. 1 — 28 November 2019
10 / 10
相关型号:
©2020 ICPDF网 联系我们和版权申明