IP3319CX6 [NEXPERIA]

Single-channel common-mode filter with integrated ESD protection networkProduction;


型号：	IP3319CX6
厂家：	Nexperia
描述：	Single-channel common-mode filter with integrated ESD protection networkProduction
文件：	总15页 (文件大小：923K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

IP3319CX6

Single-channel common-mode filter with integrated ESD

protection network

Rev. 2 — 29 May 2013

Product data sheet

1. Product profile

1.1 General description

2-lines (one differential channel) common-mode filter with integrated ESD protection up to

15 kV contact discharge, exceeding IEC 61000-4-2, level 4. The device can eliminate

efficiently common-mode noise from USB 2.0 and other high-speed interfaces with

differential lines. IP3319CX6 attenuates significantly common-mode noise above

800 MHz while differential-mode signal extends out to more than 1 GHz before reaching

the 3 dB point.

IP3319CX6 is designed to protect sensitive I/Os, such as USB 2.0, Ethernet, Digital Video

Interface (DVI) and Low-Voltage Differential Signaling (LVDS) interfaces from destruction

by ElectroStatic Discharge (ESD).

IP3319CX6 is a combination of an integrated copper-coils common-mode filter and a

monolithic silicon technology-based ESD protection. It integrates two ultra-low

capacitance rail-to-rail diodes plus a separated protection diode in a 0.4 mm pitch

Wafer-Level Chip-Size Package (WLCSP). Due to the rail-to-rail concept, the protection is

working independently from availability of a supply voltage

1.2 Features and benefits

 2-lines (one differential mode)

common-mode filter

 ESD protection up to 15 kV on external

contact pins

 ESD protection for the USB ID line

 Extremely low clamping voltage

 Ultra low ESD diode capacitance

 WLCSP6 with 0.4 mm pitch

1.3 Applications

 USB 2.0 High-speed lines

 LVDS interfaces

 DVI

1.4 Quick reference data

Table 1.

Quick reference data

Symbol Parameter

Conditions

channel series resistance single line; input to output

Min

Typ

Max Unit

R_s(ch)

C_d



[1]

diode capacitance

V_I= 0 V; f = 1 MHz;

pins A2, B2 to GND

1.5

[1] This parameter is guaranteed by design.

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

2. Pinning information

ꢎꢒꢓꢅꢇꢔꢕ

ꢊꢃꢍꢆꢖꢇꢂꢁꢆꢂ

ꢙ

ꢕ

ꢔ

ꢗ

ꢘ

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢆ

ꢀꢁꢂꢃꢄꢅꢂꢁꢆꢃꢀꢇꢀꢈꢅꢇꢉꢊꢆꢋ

ꢄꢈꢌꢍꢆꢁꢇꢎꢂꢌꢌꢄꢇꢏꢂꢐꢊꢃꢑꢇꢍꢈꢋꢃꢇ

Fig 1. Pin configuration

Table 2.

Pinning

Symbol ^[1]Description ^[1]

D+_OUT

D+_IN

D_OUT

D_IN

GND

USB data D+ (host side)

USB data D+ (connector side)

USB data D (host side)

USB data D (connector side)

ground

USB identification

[1] D+ and D are interchangeable.

3. Ordering information

Table 3.

Ordering information

Type number Package

Name

Description

Version

IP3319CX6

WLCSP6 wafer level chip-size package; 6 bumps (2  3) ^[1]

IP3319CX6

[1] Size: 1.34 mm  0.95 mm  0.57 mm

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

2 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

4. Marking

IP3319CX6 is laser-marked with the following information (see Figure 2):

• A marker indicating the pin A1 position.

• Two lines of characters or numbers:

– The first line (placeholder <marking code>) indicates the marking code.

Mapping of product type number to marking code is given in Table 4.

– The second line (placeholder <lot ID>) indicates the production lot.

This information enables tracking a device down to a particular production date.

ꢅꢊꢃꢇꢔꢕꢇꢓꢂꢁꢚꢆꢁꢇ

ꢀ ꢎ ꢊ ꢏ ꢈ ꢐ ꢑ ꢍ

ꢀ ꢁ ꢂ ꢃ ꢄ ꢅ ꢆ ꢇ ꢈ ꢉ ꢊ ꢋ ꢌ ꢍ ꢈ

ꢀꢀꢀꢁꢂꢂꢃꢇꢄꢈ

Fig 2. IP3319CX6: outline of the marking

Table 4.

Marking codes

Type number

Marking code

IP3319CX6

319

5. Functional diagram

ꢔꢕ

ꢗꢕ

ꢔꢙ

ꢗꢙ

ꢘꢙ

ꢘꢕ

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢅ

D+ and D- are interchangeable.

Fig 3. Functional diagram

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

3 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

6. Limiting values

Table 5.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol

V_I

Parameter

Conditions

Min

Max

Unit

input voltage

0.5

5.5

V_ESD

electrostatic discharge IEC 61000-4-2, level 4;

voltage

pins A2, B2, C2 to GND (C1)

contact discharge

15

+15

air discharge

IEC 61000-4-2, level 4;

pins A1, B1 to GND (C1)

contact discharge

air discharge

2

C

2

T_stg

storage temperature

ambient temperature

55

40

+125

+85

T_amb

7. Characteristics

7.1 Electrical characteristics

Table 6.

Electrical characteristics

T_amb= 25 C unless otherwise specified.

Symbol Parameter Conditions

Min

Typ

Max Unit

R_s(ch)

channel series

resistance

single line; input to output



[1]

C_d

diode capacitance

V_I= 0 V; f = 1 MHz;

pins A2, B2 to GND

1.5

pin C2 to GND

1.7

I_RM

reverse leakage

current

pins A2, B2, C2 to GND;

V_I= 3 V

0.01

A

V_BR

breakdown voltage

pins A2, B2, C2 to GND;

I_R= 10 mA

V_F

forward voltage

I_F= 10 mA

0.7

[2]

[3]

R_dyn

dynamic resistance

TLP

positive transient

negative transient

surge

0.25

0.20



positive transient

negative transient

I_CL= 6 A

0.20

0.14



[3]

V_CL

clamping voltage

I_CL= 6 A

2.5

[1] This parameter is guaranteed by design.

[2] 100 ns Transmission Line Pulse (TLP); 50 ; pulser at 80 ns.

[3] According to IEC 61000-4-5 (8/20 s).

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

4 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢈ

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢇ

ꢕꢝ

ꢛ

)

ꢘ&

'ꢔ(

ꢘ&

'ꢔ(

ꢕꢛ$

*ꢜ$

ꢜ$

ꢛ

*ꢕꢛ$

*ꢕꢝ

ꢛ

ꢕ

ꢙ

ꢜ

ꢝ

*ꢝ

*ꢜ

*ꢙ

*ꢕ

% ꢇ'%(

ꢘ&

ꢛ

ꢇ'%(

ꢘ&

Pin A2; t_p= 100 ns; Transmission Line Pulse (TLP)

Fig 4. Dynamic resistance with positive clamping

Fig 5. Dynamic resistance with negative clamping

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢃ

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢉ

ꢕꢝ

ꢛ

)

ꢘ&

'ꢔ(

ꢘ&

'ꢔ(

ꢕꢛ$

*ꢜ$

ꢜ$

ꢛ

*ꢕꢛ$

*ꢕꢝ

ꢛ

ꢕ

ꢙ

ꢜ

ꢝ

*ꢝ

*ꢜ

*ꢙ

*ꢕ

% ꢇ'%(

ꢘ&

ꢛ

ꢇ'%(

ꢘ&

Pin C2; t_p= 100 ns; Transmission Line Pulse (TLP)

Fig 6. Dynamic resistance with positive clamping

Fig 7. Dynamic resistance with negative clamping

The device uses an advanced clamping structure showing a negative dynamic resistance.

This snap-back behavior strongly reduces the clamping voltage to the system behind the

ESD protection during an ESD event. Do not connect unlimited DC current sources to the

data lines to avoid keeping the ESD protection device in snap-back state after exceeding

breakdown voltage (due to an ESD pulse for instance).

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

5 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

7.2 Frequency characteristics

Table 7.

Frequency characteristics

Symbol Parameter

Common mode

Conditions

Min

Typ

Max

Unit

_il

insertion loss S21cc; R_gen= 50 ; R_L= 50 

700 MHz  f  1.8 GHz

13

11

f > 1.8 GHz

Differential mode

_ilinsertion loss S21dd; R_gen= 50 ; R_L= 50 

f = 500 MHz

f = 1 GHz

3

5

Figure 8 shows the common mode and differential mode attenuation measured in a 50 

NetWork Analyzer (NWA) system.

The 3 dB point for the differential-mode signal is above 1 GHz. The common-mode

attenuation reaches a typical value of 25 dB in the GSM band.

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢊ

ꢛ

ꢞ

ꢊꢌ

'ꢍꢗ(

'ꢕ(

'ꢙ(

*ꢕꢙ

*ꢕ#

*ꢙꢝ

*ꢜꢛ

ꢕꢛ

ꢏꢇ',-(

(1) S21dd: differential mode

(2) S21cc: common mode

Fig 8. Common-mode and differential-mode insertion loss

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

6 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢋ

Data rate: 480 Mbit/s (USB 2.0 High-speed)

Vertical scale = 124 mV/div

Horizontal scale = 260 ps/div

Fig 9. USB 2.0 eye diagram Printed-Circuit Board (PCB) with IP3319CX6

ꢀꢀꢀꢁꢂꢂꢃꢄꢈꢂ

Data rate: 480 Mbit/s (USB 2.0 High-speed)

Vertical scale = 124 mV/div

Horizontal scale = 260 ps/div

Fig 10. USB 2.0 eye diagram PCB without IP3319CX6 (reference)

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

7 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

8. Package outline

ꢒꢓꢔꢕꢖꢗꢘꢈꢙꢂꢚꢌꢃꢈꢎꢌꢛꢌꢎꢈꢉꢜꢅꢝ !ꢅ"ꢌꢈꢝꢂꢉꢄꢂꢇꢌ#ꢈꢗꢈ$%ꢁꢝ!ꢈ&'ꢈ(ꢈ)*

ꢎꢒꢓꢅꢇꢔꢕ

ꢊꢃꢍꢆꢖꢇꢂꢁꢆꢂ

ꢔ

ꢕ

ꢔ

ꢍꢆꢀꢂꢊꢌꢇ1

ꢆ

ꢎ

ꢘ

ꢗ

ꢔ

ꢆ

ꢕ

ꢙ

/ꢒꢁꢈꢅꢆꢂꢃ

ꢅꢁꢈ0ꢆꢐꢀꢊꢈꢃ

ꢌꢍꢎꢏꢐꢃꢑꢆꢒꢅꢑꢓꢔꢕꢔꢓꢏꢔꢖꢑꢐꢗ

Fig 11. Package outline WLCSP6

Table 8.

Package outline dimensions of WLCSP6

Symbol

Min

Typ

Max

0.60

0.38

0.31

1.00

1.39

0.42

0.84

Unit

0.54

0.36

0.21

0.90

1.29

0.38

0.76

0.57

0.37

0.26

0.95

1.34

0.40

0.80

A₁

e₁

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

8 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

9. Packing information

Table 9.

Packing methods

The indicated -xxx are the last three digits of the 12NC ordering code.^[1]

Type number

Package

Description

Packing quantity

4 500

IP3319CX6

WLCSP6 4 mm pitch, 8 mm tape and reel

-135

[1] For further information and the availability of packing methods, see Section 14.

10. Soldering

ꢆ

ꢐ

ꢄꢈꢌꢍꢆꢁꢇꢁꢆꢄꢊꢄꢀ

ꢆ

ꢄꢈꢌꢍꢆꢁꢇꢅꢂꢄꢀꢆꢇ4ꢇꢄꢈꢌꢍꢆꢁꢌꢂꢃꢍ

ꢈꢐꢐꢒꢅꢊꢆꢍꢇꢂꢁꢆꢂ

ꢏ

2ꢊꢓꢆꢃꢄꢊꢈꢃꢄꢇꢊꢃꢇꢓꢓ

ꢆ

ꢋꢌꢐꢄꢅ!3ꢙꢖꢜ3ꢏꢁ

Fig 12. Reflow soldering footprint WLCSP6

Table 10. Reflow soldering dimensions of WLCSP6

Symbol

Min

Typ

Max

Unit

0.25

0.96

1.36

0.40

0.325

0.91

1.01

1.31

1.41

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

9 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

11. Design and assembly recommendations

11.1 PCB design guidelines

For optimum performance, use a Non-Solder Mask Defined (NSMD), also known as a

copper-defined design, incorporating laser-drilled micro-vias connecting the ground pads

to a buried ground-plane layer. This results in the lowest possible ground inductance and

provides the best high frequency and ESD performance. Refer to Table 11 for the

recommended Printed-Circuit Board (PCB) design parameters.

Table 11. Recommended PCB design parameters

Parameter

Value or specification

250 m

PCB pad diameter

Micro-via diameter

Solder mask aperture diameter

Copper thickness

Copper finish

100 m (0.004 inch)

325 m

20 m to 40 m

AuNi

PCB material

FR4

11.2 PCB assembly guidelines for Pb-free soldering

Table 12. Assembly recommendations

Parameter

Value or specification

Solder screen aperture diameter

Solder screen thickness

Solder paste: Pb-free

Solder to flux ratio

290 m

100 m (0.004 inch)

SnAg (3 % to 4 %) Cu (0.5 % to 0.9 %)

50 : 50

Solder reflow profile

see Figure 13

(°C)

reflow(peak)

250

230

217

cooling rate

preheat

t (s)

001aai943

The device can withstand at least three reflows of this profile.

Fig 13. Pb-free solder reflow profile

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

10 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

Table 13. Characteristics

Symbol Parameter

T_reflow(peak)peak reflow temperature

Conditions

Min

230

Typ

Max Unit

260

180

C

t₁

time 1

time 2

time 3

time 4

time 5

soak time

t₂

time during T  250 C

t₃

time during T  230 C 10

t₄

time during T > 217 C 30

150

540

6

t₅

dT/dt

rate of change of temperature cooling rate

pre-heat

C/s

2.5

4.0

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

11 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

12. Revision history

Table 14. Revision history

Document ID

IP3319CX6 v.2

Modifications:

Release date

20130529

Data sheet status

Change notice

Supersedes

Product data sheet

IP3319CX6 v.1

• Section 1.1 “General description”: corrected

• Table 5: V_Iand V_ESDupdated

• Table 6: R_s(ch), C_dand V_BRupdated

• Section 13 “Legal information”: updated

IP3319CX6 v.1

20130130

Product data sheet

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

12 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

13. Legal information

13.1 Data sheet status

Document status^[1][2]

Product status^[3]

Development

Definition

Objective [short] data sheet

This document contains data from the objective specification for product development.

This document contains data from the preliminary specification.

This document contains the product specification.

Preliminary [short] data sheet Qualification

Product [short] data sheet Production

[1]

[2]

[3]

Please consult the most recently issued document before initiating or completing a design.

The term ‘short data sheet’ is explained in section “Definitions”.

The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nexperia.com.

Suitability for use — Nexperia products are not designed,

13.2 Definitions

authorized or warranted to be suitable for use in life support, life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of a Nexperia product can reasonably be expected

to result in personal injury, death or severe property or environmental

damage. Nexperia and its suppliers accept no liability for

inclusion and/or use of Nexperia products in such equipment or

applications and therefore such inclusion and/or use is at the customer’s own

risk.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the Nexperia

product is suitable and fit for the customer’s applications and

products planned, as well as for the planned application and use of

customer’s third party customer(s). Customers should provide appropriate

design and operating safeguards to minimize the risks associated with their

applications and products.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the Nexperia product is

deemed to offer functions and qualities beyond those described in the

Product data sheet.

Nexperia does not accept any liability related to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party customer(s). Customer is responsible for doing all necessary

testing for the customer’s applications and products using Nexperia

products in order to avoid a default of the applications and

13.3 Disclaimers

Limited warranty and liability — Information in this document is believed to

be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no

responsibility for the content in this document if provided by an information

source outside of Nexperia.

the products or of the application or use by customer’s third party

customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

In no event shall Nexperia be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Terms and conditions of commercial sale — Nexperia

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nexperia.com/profile/terms, unless otherwise

agreed in a valid written individual agreement. In case an individual

agreement is concluded only the terms and conditions of the respective

agreement shall apply. Nexperia hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of Nexperia products by customer.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

No offer to sell or license — Nothing in this document may be interpreted or

construed as an offer to sell products that is open for acceptance or the grant,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

13 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards, customer

(a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s

own risk, and (c) customer fully indemnifies Nexperia for any

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified,

the product is not suitable for automotive use. It is neither qualified nor tested

in accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of

liability, damages or failed product claims resulting from customer design and

use of the product for automotive applications beyond Nexperia’s

standard warranty and Nexperia’s product specifications.

non-automotive qualified products in automotive equipment or applications.

13.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

14. Contact information

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

IP3319CX6

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2 — 29 May 2013

14 of 15

IP3319CX6

Nexperia

1-channel common-mode filter with integrated ESD protection network

15. Contents

Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1

General description . . . . . . . . . . . . . . . . . . . . . 1

Features and benefits. . . . . . . . . . . . . . . . . . . . 1

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Quick reference data . . . . . . . . . . . . . . . . . . . . 1

1.1

1.2

1.3

1.4

Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

Ordering information. . . . . . . . . . . . . . . . . . . . . 2

Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Functional diagram . . . . . . . . . . . . . . . . . . . . . . 3

Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4

7.1

7.2

Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4

Electrical characteristics. . . . . . . . . . . . . . . . . . 4

Frequency characteristics. . . . . . . . . . . . . . . . . 6

Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8

Packing information . . . . . . . . . . . . . . . . . . . . . 9

Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

11.1

11.2

Design and assembly recommendations . . . 10

PCB design guidelines . . . . . . . . . . . . . . . . . . 10

PCB assembly guidelines for Pb-free soldering . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Revision history. . . . . . . . . . . . . . . . . . . . . . . . 12

Legal information. . . . . . . . . . . . . . . . . . . . . . . 13

Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13

Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14

13.1

13.2

13.3

13.4

Contact information. . . . . . . . . . . . . . . . . . . . . 14

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 29 May 2013

IP3319CX6 [NEXPERIA]

相关型号：

IP3337CX18

IP3337CX18/LF

IP3337CX18/LF/P,13

IP3337CX18_09

IP3338CX24

IP3338CX24/LF

IP3338CX24/LF,135

IP3338CX24/LF/P,13

IP3338CX24_09

IP3348CX10

IP3348CX10,135

IP3348CX15