MMBZ16VAL [NEXPERIA]
High surge current unidirectional double ESD protection diodesProduction;型号: | MMBZ16VAL |
厂家: | Nexperia |
描述: | High surge current unidirectional double ESD protection diodesProduction |
文件: | 总12页 (文件大小:232K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MMBZ16VAL
High surge current unidirectional double ESD protection
diodes
6 November 2017
Product data sheet
1. General description
Unidirectional double ElectroStatic Discharge (ESD) protection diodes in a common anode
configuration, encapsulated in a SOT23 (TO-236AB) small Surface-Mounted Device (SMD) plastic
package. The device is designed for ESD and transient overvoltage protection of up to two signal
lines.
2. Features and benefits
•
Unidirectional protection of two lines
•
•
•
•
Reverse standoff voltage: VRWM = 13 V
Average measured surge robustness: IPPM = 14 A (8/20 µs) / IPPM = 2.54 A (10/1000 µs)
Typical reverse leakage current: IRM = 0.1 nA
AEC-Q101 qualified
3. Applications
•
•
•
Automotive in-vehicle networks protection
Industrial application
Power management
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tj = 25 °C
-
-
13
V
IPPM
VCL
rated peak pulse
current
tp = 10/1000 µs
[1] [2]
-
-
-
1.9
23
A
V
clamping voltage
IPP = 1.7 A; tp = 10/1000 µs; Tj = 25 °C [1] [2]
19.5
[1] According to IEC 61643-321.
[2] Measured from pin 1 or 2 to pin 3.
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
5. Pinning information
Table 2. Pinning information
Pin
1
Symbol Description
Simplified outline
Graphic symbol
3
K1
K2
A
cathode
3
2
cathode
3
common anode
1
2
1
2
TO-236AB (SOT23)
006aaa154
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
Version
MMBZ16VAL
TO-236AB
plastic, surface-mounted package; 3 terminals; 1.9 mm pitch; 2.9 SOT23
mm x 1.3 mm x 1 mm body
7. Marking
Table 4. Marking codes
Type number
Marking code[1]
MMBZ16VAL
%H7
[1] % = placeholder for manufacturing site code
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
2 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
8. Limiting values
Table 5. Limiting values
In accordance with the Aboluste Maximum Rating System (IEC 60134)
Symbol
Parameter
Conditions
Min
Max
300
45
Unit
W
PPPM
rated peak pulse power tp = 8/20 µs
tp = 10/1000 µs
[1] [2]
[3] [2]
[1] [2]
[3] [2]
-
-
W
IPPM
rated peak pulse current tp = 8/20 µs
tp = 10/1000 µs
-
11
A
-
1.9
A
Tj
junction temperature
-
150
150
150
°C
°C
°C
Tamb
Tstg
ambient temperature
-55
-65
storage temperature
ESD maximum ratings
VESD electrostatic discharge
voltage
IEC 61000-4-2; contact discharge
IEC 61000-4-2; air discharge
[4] [2]
[4] [2]
-
-
30
30
kV
kV
[1] According to IEC 61000-4-5.
[2] Measured from pin 1 or 2 to pin 3.
[3] According to IEC 61643-321.
[4] Device stressed with ten non-repetitive ESD pulses.
001aaa631
001aaa630
120
I
PP
100 %
90 %
100 % I ; 8 µs
PP
I
PP
(%)
80
-t
e
50 % I ; 20 µs
PP
40
10 %
0
t
t = 0.6 ns to 1 ns
r
0
10
20
30
40
t (µs)
30 ns
60 ns
Fig. 1. 8/20 µs pulse waveform according to
IEC 61000-4-5
Fig. 2. ESD pulse waveform according to
IEC 61000-4-2
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
3 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
006aab319
150
I
PP
(%)
100 % I ; 10 µs
PP
100
50 % I ; 1000 µs
PP
50
0
0
1.0
2.0
3.0
4.0
t
(ms)
p
Fig. 3. 10/1000 µs pulse waveform according to IEC 61643-321
9. Characteristics
Table 6. Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tj = 25 °C
-
-
13
V
VBR
IRM
breakdown voltage
IR = 1 mA; Tj = 25 °C
[1]
[1]
15.2
-
16
16.8
5
V
reverse leakage
current
VRWM = 13 V; Tj = 25 °C
0.1
nA
Cd
diode capacitance
clamping voltage
f = 1 MHz; VR = 0 V; Tj = 25 °C
IPP = 11 A; tp = 8/20 µs; Tj = 25 °C
[1]
-
-
-
76
95
28
23
pF
V
VCL
[2] [1]
23
IPP = 1.7 A; tp = 10/1000 µs; Tj = 25 °C [3] [1]
19.5
V
[1] Measured from pin 1 or 2 to pin 3.
[2] According to IEC 61000-4-5.
[3] According to IEC 61643-321.
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
4 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
006aab321
I
1.2
P
PPM
P
PPM(25°C)
0.8
- V
- V
- V
RWM
V
CL
BR
- I
- I
RM
R
0.4
-
+
P-N
0
0
50
100
150
200
- I
PP
T (°C)
j
- I
PPM
006aab324
Fig. 5. Relative variation of rated peak pulse power
as a function of junction temperature; typical
values
Fig. 4. V-I characteristics for a unidirectional TVS
protection diode
aaa-027131
aaa-027130
90
120
C
(pF)
d
P
(W)
PPM
80
70
60
50
40
30
20
10
0
100
80
60
40
20
0
2
3
4
0
4
8
12
16
10
10
10
t
p
V
(V)
R
Fig. 6. Diode capacitance as a function of reverse
voltage; typical values
Fig. 7. Rated peak pulse power as a function of a
pulse duration; typical values
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
5 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
aaa-027132
aaa-027133
30
0
-2
-4
V
CL
(V)
V
CL
(V)
20
-6
-8
-10
-12
10
-14
-16
0
0
5
10
15
-100
-75
-50
0
-25
I
(A)
I
(A)
PP
PP
tp = 8/20 μs; according to IEC 61000-4-5
tp = 8/20 μs; according to IEC 61000-4-5
Fig. 8. Positive clamping voltage (8/20 μs pulse);
typical values
Fig. 9. Negative clamping voltage (8/20 μs pulse);
typical values
aaa-027134
aaa-027135
21
0
V
CL
(V)
V
CL
(V)
-0.5
20
-1
-1.5
-2
19
18
-2.5
-6
-5
-4
-3
-2
-1
0
0
1
2
3
I
(A)
I
(A)
PP
PP
tp = 10/1000 μs; according to IEC 61643-321
tp = 10/1000 μs; according to IEC 61643-321
Fig. 10. Positive clamping voltage (10/1000 μs pulse);
typical values
Fig. 11. Negative clamping voltage (10/1000 μs pulse);
typical values
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
6 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
ESD TESTER
4 GHz DIGITAL
OSCILLOSCOPE
RG 223/U
50 Ω coax
R
d
40 dB
ATTENUATOR
50 Ω
C
s
DUT
(DEVICE
UNDER
TEST)
IEC 61000-4-2 ed.2
= 150 pF; R = 330 Ω
C
s
d
10
8
2
0
V
(kV)
V
(kV)
6
-2
-4
4
2
-6
-8
0
-2
-10
-10
-10
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
t (ns)
t (ns)
unclamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
unclamped -8 kV ESD pulse waveform
(IEC 61000-4-2 network)
aaa-003952
aaa-027137
Fig. 12. ESD clamping test setup and waveforms
aaa-027136
120
60
40
V
V
CL
(V)
CL
(V)
100
80
60
40
20
0
20
0
V
at 30 ns = 17 V
CL_ESD
-20
-40
-60
-80
V
at 30 ns = -2 V
CL_ESD
-20
-40
-60
-100
-10
-10
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
t (ns)
t (ns)
Fig. 13. Clamped +8 kV pulse waveform (IEC61000-4-2
network)
Fig. 14. Clamped -8 kV pulse waveform (IEC61000-4-2
network)
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
7 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
10. Application information
The device is designed for the protection of one bidirectional or up to two unidirectional data or
signal lines from the damage caused by ESD and surge pulses.
The devices may be used on lines where the signal polarities are either positive or negative
with respect to ground for the unidirectional configuration or both positive and negative for the
bidirectional configuration.
line 1 to be protected
line 2 to be protected
line 1 to be protected
MMBZxAL
GND
MMBZxAL
GND
unidirectional protection
bidirectional protection
of two lines
of one line
006aab842
Fig. 15. Application diagram
11. Package outline
3.0
2.8
1.1
0.9
3
0.45
0.15
2.5 1.4
2.1 1.2
1
2
0.48
0.38
0.15
0.09
1.9
Dimensions in mm
04-11-04
Fig. 16. Package outline TO-236AB (SOT23)
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
8 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
12. Soldering
3.3
2.9
1.9
solder lands
solder resist
2
3
1.7
solder paste
occupied area
0.6
0.7
(3×)
(3×)
Dimensions in mm
0.5
(3×)
0.6
(3×)
1
sot023_fr
Fig. 17. Reflow soldering footprint for TO-236AB (SOT23)
2.2
1.2
(2×)
1.4
(2×)
solder lands
solder resist
occupied area
2.6
4.6
Dimensions in mm
1.4
preferred transport direction during soldering
2.8
4.5
sot023_fw
Fig. 18. Wave soldering footprint for TO-236AB (SOT23)
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
9 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
13. Revision history
Table 7. Revision history
Data sheet ID
Release date
20171106
Data sheet status
Change notice
Supersedes
MMBZ16VAL v.1
Product data sheet
-
-
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
10 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
14. Legal information
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Data sheet status
Suitability for use in automotive applications — This Nexperia product
has been qualified for use in automotive applications. Unless otherwise
agreed in writing, the product is not designed, authorized or warranted to
Document
status [1][2] status [3]
Product
Definition
Objective
[short] data
sheet
Development This document contains data from
the objective specification for product
development.
be suitable for use in life support, life-critical or safety-critical systems or
equipment, nor in applications where failure or malfunction of an Nexperia
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. Nexperia and its suppliers accept
no liability for inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Preliminary
[short] data
sheet
Qualification This document contains data from the
preliminary specification.
Product
[short] data
sheet
Production
This document contains the product
specification.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1] Please consult the most recently issued document before initiating or
completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the Internet at URL http://www.nexperia.com.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Definitions
Preview — The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
Nexperia does not give any representations or warranties as to the accuracy
or completeness of information included herein and shall have no liability for
the consequences of use of such information.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Disclaimers
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’ aggregate and cumulative liability towards customer
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
11 / 12
Nexperia
MMBZ16VAL
High surge current unidirectional double ESD protection diodes
15. Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 3
9. Characteristics..............................................................4
10. Application information............................................. 8
11. Package outline.......................................................... 8
12. Soldering..................................................................... 9
13. Revision history........................................................10
14. Legal information..................................................... 11
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 6 November 2017
©
MMBZ16VAL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
6 November 2017
12 / 12
相关型号:
©2020 ICPDF网 联系我们和版权申明