PESD1ETH1GLS-Q [NEXPERIA]
ESD protection for In-vehicle networksProduction;
| 型号： | PESD1ETH1GLS-Q |
| 厂家： | 
Nexperia |
| 描述： | ESD protection for In-vehicle networksProduction |
| 文件： | 总11页 (文件大小：221K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
6 October 2022
Product data sheet
1. General description
Fully OPEN Alliance IEEE 100BASE-T1 and 1000BASE-T1 compliant ElectroStatic Discharge
(ESD) protection device in a small DFN1006BD-2 (SOD882BD) surface-mounted plastic package,
designed to protect one automotive in-vehicle network bus line from the damage caused by ESD
and other transients.
2. Features and benefits
•
Fully OPEN Alliance IEEE 100BASE-T1 and 1000BASE-T1 compliant
•
•
•
•
•
High trigger voltage: Vt1 = 100 V min
Low capacitance: Cd < 1.8 pF
ESD protection up to 30 kV (IEC 61000-4-2; ISO10605)
1000 contact discharges (OPEN Alliance specification) with 15 kV (IEC 61000-4-2)
Qualified according to AEC-Q101 and recommended for use in automotive applications
3. Applications
ESD protection for In-vehicle network lines in automotive environments
•
•
OPEN Alliance IEEE 100/1000BASE-T1 Ethernet
Low-Voltage Differential Signaling (LVDS) automotive
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tamb = 25 °C
-
-
24
V
Cd
diode capacitance
trigger voltage
f = 1 MHz; VR = 0 V; Tamb = 25 °C
tp = 100 ns; Tamb = 25 °C
-
1.5
130
-
1.8
pF
V
Vt1
[1]
100
-
-
VESD
electrostatic discharge ISO 10605; contact discharge;
[2] [3] 30
kV
voltage
C = 150 pF; R = 330 Ω
ISO 10605; contact discharge;
C = 330 pF; R = 330 Ω
[2] [3] 30
-
-
-
-
kV
kV
1000 contact discharges
(IEC 61000-4-2); OPEN Alliance
specification
[3]
15
[1] Non-repetitive current pulse, Transmission Line Pulse (TLP); square pulse; ANSI / ESD STM5.5.1-2008
[2] Device stressed with ten non-repetitive ESD pulses.
[3] Measured from pin 1 to pin 2.
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
5. Pinning information
Table 2. Pinning information
Pin
1
Symbol
K1
Description
Simplified outline
Graphic symbol
cathode (diode 1)
cathode (diode 2)
1
2
2
K2
K1
K2
Transparent
top view
sym045
DFN1006BD-2 (SOD882BD)
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
Version
PESD1ETH1GLS-Q
DFN1006BD-2 Leadless ultra small plastic package with side-wettable
SOD882BD
flanks (SWF); 2 terminals; 0.65 mm pitch; 1 mm x 0.6 mm
x 0.47 mm body
7. Marking
Table 4. Marking codes
Type number
Marking code
HSH
PESD1ETH1GLS-Q
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
2 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC60134)
Symbol
IPPM
Tj
Parameter
Conditions
Min
-
Max
2.3
150
150
150
-
Unit
A
rated peak pulse current tp = 8/20 µs
junction temperature
[1]
-
°C
°C
°C
kV
kV
Tamb
Tstg
ambient temperature
-55
-65
storage temperature
VESD
electrostatic discharge
voltage
IEC 61000-4-2; contact discharge
[2] [3] 30
[2] [3] 30
ISO 10605; contact discharge;
C = 150 pF; R = 330 Ω
-
ISO 10605; contact discharge;
C = 330 pF; R = 330 Ω
[2] [3] 30
-
-
kV
kV
1000 contact discharges (IEC 61000-4-2); [3]
OPEN Alliance specification
15
[1] Device stressed with 8/20 μs exponential decay waveform according to IEC 61000-4-5.
[2] Device stressed with ten non-repetitive ESD pulses.
[3] Measured from pin 1 to pin 2.
001aaa630
I
PP
120
100 %
90 %
100 % I ; 8 µs
PP
I
PP
(%)
80
-t
e
50 % I ; 20 µs
PP
40
10 %
t
t = 0.6 ns to 1 ns
r
0
0
10
20
30
40
30 ns
60 ns
t (µs)
001aaa631
Fig. 2. ESD pulse waveform according to
IEC 61000-4-2
Fig. 1. 8/20 µs pulse waveform according to
IEC 61000-4-5
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
3 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
9. Characteristics
Table 6. Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tamb = 25 °C
-
-
24
V
Vh
holding voltage
trigger voltage
tp = 100 ns; Tamb = 25 °C
[1]
[1]
28
-
-
V
Vt1
IRM
Cd
100
130
1
-
V
reverse leakage current VRWM = 24 V; VR = 0 V; Tamb = 25 °C
-
-
-
100
1.8
-
nA
pF
Ω
diode capacitance
dynamic resistance
f = 1 MHz; VR = 0 V; Tamb = 25 °C
IR = 40 A; tp = 100 ns; Tamb = 25 °C
1.5
0.6
Rdyn
[1]
[1] Non-repetitive current pulse, Transmission Line Pulse (TLP); square pulse; ANSI / ESD STM5.5.1-2008
001aaa193
I
1.2
reverse
P
PP
P
PP(25°C)
I
R
dyn
=
V/ I
0.8
V
V
0.4
V
V
t1
h
forward
0
0
50
100
150
200
T (°C)
j
aaa-030568
Fig. 4. Relative variation of peak pulse power as a
function of junction temperature; typical values
Fig. 3. V-I characteristics for a bidirectional ESD
protection diode
aaa-033655
1.6
C
d
(pF)
1.2
0.8
0.4
0
-40
-20
0
20
40
V
(V)
R
f = 1 MHz; Tamb = 25 °C
Fig. 5. Diode capacitance as a function of reverse voltage; typcial values
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
4 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
aaa-035216
aaa-035215
10
PP
90
I
I
PP
(A)
(A)
-10
70
-30
-50
-70
-90
50
30
10
-10
0
-160
-120
-80
-40
0
40
80
120
160
V
(V)
V
(V)
CL
CL
Transmission Line Pulse (TLP);
tp = 100 ns; tr = 1 ns
Transmission Line Pulse (TLP);
tp = 100 ns; tr = 1 ns
Fig. 7. Dynamic resistance with negative clamping;
typical values
Fig. 6. Dynamic resistance with positive clamping;
typical values
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
5 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
10. Application information
In the IEEE 100BASE-T1 and 1000BASE-T1 EMC Test Specification for ESD suppression devices1
document (further referred as OPEN Alliance 100/1000BASE-T1 specification), the OPEN Alliance
describes four different tests to ensure compliance of ESD suppressor devices and PHYs which
are compliant according to the document “Transceiver EMC Test Specification”.
The return loss and insertion loss are evaluated using the differential S-parameters Sdd11 and
Sdd21. These measurements replace the requirement for a certain capacitance value. To ensure
symmetry, the differential to common mode rejection is evaluated using the S-parameter Ssd21. This
measurement replaces the requirement for a matching of the capacitances per line. To ensure that
the device does not degrade and changes behavior after repetitive ESD events, the S-parameter
measurements are repeated after discharging 20 times ±8 kV ESD on signal lines 1 and 2, with
C = 150 pF, R = 330 Ω according to ISO 10605. Subsequently, the S-parameters are measured
again and compared to the original data.
To predict if the ESD suppressor device would protect a PHY of a certain robustness class (Class I
(JEDEC-HBM 4 kV) and Class II (JEDEC-HBM 2 kV)), the ESD discharge current is measured
in a reference circuit according to OPEN Alliance 100/1000BASE-T1 specification for ±4 kV
and ±6 kV according to IEC 61000-4-2 with C = 150 pF and R = 330 Ω. Unlike in the OPEN
Alliance 100BASE-T1 specification of October 29 2017, the „Transceiver Simulation network“ is
implemented with 2 Ω and 50 Ω resistors.
To ensure that the ESD suppressor device is not impacting the EMC performance of the complete
module, the RF clamping test as defined in the OPEN Alliance 100/1000BASE-T1 specification is
applied. First a measurement at a reference power level of 25 dBm is conducted in an environment
defined by the OPEN Alliance 100/1000BASE-T1 specification. Next, the power is increased to
33 dBm (Class I), 36 dBm (Class II), and 39 dBm (Class III). No change in the measured common
mode rejection indicates that the ESD suppressor device is not impacting the modules EMC
performance.
Please ask your Nexperia contact for full test report with all details and graphs.
common
100 nF
mode choke
BI_DA+
100BASE-T1
or
1000BASE-T1
transceiver
100 nF
BI_DA-
according
to OPEN
alliance
PESD1ETHx
2
1
2
1
1 kΩ
1 kΩ
PESD1ETHx
100 kΩ
4.7 nF
aaa-032880
Fig. 8. Application diagram
1 OPEN Alliance: "100BASE-T1 EMC Test Specification for ESD suppression devices", version 2.0 final,
October 30, 2020; "1000BASE-T1 EMC Test Specification for ESD suppression devices", version 1.0 final,
October 30, 2020
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
6 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
11. Package outline
DFN1006BD-2 Leadless ultra small plastic package with side-wettable flanks (SWF); 2 terminals;
0.65 mm pitch; 1 mm x 0.6 mm x 0.47 mm body
SOD882BD
L
(2x)
T
1
2
b
bf
(2x)
(2x)
v
B
C A
C
w
e
y
1
C
A
A
C
1
SEATING PLANE
y
C
C
E
A
u
D
B
(3)
(3)
(2)
u
C
0
0.5
1 mm
scale
Dimensions
Unit
(1)
(1)
(1)
A
A
bf
b
D
E
e
L
T
u
v
w
y
y
1
1
max 0.50 0.04
mm nom 0.47
min 0.44
0.55
0.50 0.60 1.00 0.65 0.25 0.16 0.05 0.10 0.05 0.05 0.05
0.20 0.45 0.22 0.10
0.30 0.22
Note
1. Dimension including plating thickness.
2. The marking bar indicates the cathode.
3. Solderable lead end, protrusion max. 0.02 mm.
sod882bd_po
References
Outline
version
European
projection
Issue date
IEC
JEDEC
JEITA
20-06-22
20-06-23
SOD882BD
MO-343AA
Fig. 9. Package outline DFN1006BD-2 (SOD882BD)
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
7 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
12. Soldering
Footprint information for reflow soldering of DFN1006BD-2 package
SOD882BD
1.4
0.2
0.8
0.6
0.7
(2×)
(2×) (2×)
0.3
0.4
1.0
1.3
solder resist
solder paste
solder lands
Dimensions in mm
20-05-01
20-12-15
Issue date
sod882bd_fr
Fig. 10. Reflow soldering footprint for DFN1006BD-2 (SOD882BD)
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
8 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
13. Revision history
Table 7. Revision history
Data sheet ID
Release date
Data sheet status
Change notice
Supersedes
PESD1ETH1GLS-Q v.3 20221006
Product data sheet
-
PESD1ETH1GLS-Q v.2
Modifications:
•
•
Parameter Vt1 (trigger voltage): typical value changed
Figures 6 and 7 (dynamic resistance): update with latest test results
PESD1ETH1GLS-Q v.2 20220106
PESD1ETH1GLS-Q v.1 20210727
Product data sheet
Product data sheet
-
-
PESD1ETH1GLS-Q v.1
-
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
9 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
equipment, nor in applications where failure or malfunction of an Nexperia
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. Nexperia and its suppliers accept
no liability for inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
14. Legal information
Data sheet status
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status Product
Definition
[1][2]
status [3]
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Disclaimers
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use in automotive applications — This Nexperia product
has been qualified for use in automotive applications. Unless otherwise
agreed in writing, the product is not designed, authorized or warranted to
be suitable for use in life support, life-critical or safety-critical systems or
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
10 / 11
Nexperia
PESD1ETH1GLS-Q
ESD protection for In-vehicle networks
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 3
9. Characteristics..............................................................4
10. Application information............................................. 6
11. Package outline.......................................................... 7
12. Soldering..................................................................... 8
13. Revision history..........................................................9
14. Legal information......................................................10
© Nexperia B.V. 2022. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 6 October 2022
©
PESD1ETH1GLS-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
6 October 2022
11 / 11
相关型号：
PESD1FLEX,235
Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Bidirectional, 2 Element, Silicon, TO-236AB
NXP
©2020 ICPDF网 联系我们和版权申明