PTVS24VU1UPA [NEXPERIA]
300 W Transient Voltage SuppressorProduction;
| 型号： | PTVS24VU1UPA |
| 厂家： | 
Nexperia |
| 描述： | 300 W Transient Voltage SuppressorProduction |
| 文件： | 总13页 (文件大小：259K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PTVS24VU1UPA
300 W Transient Voltage Suppressor
27 June 2017
Product data sheet
1. General description
300 W unidirectional Transient Voltage Suppressor (TVS) in a DFN2020-3 (SOT1061) leadless
medium power Surface-Mounted Device (SMD) plastic package, designed for transient overvoltage
protection.
2. Features and benefits
•
Unidirectional protection of one line
•
•
•
•
•
•
Reverse standoff voltage range: VRWM = 24 V
Surge current for 8/20 µs pulse: IPPM = 79 A (rated) / IPP = 100 A (average measured)
Surge current for 10/1000 µs pulse: IPPM = 7.7 A (rated) / IPP = 9.3 A (average measured)
Reverse current: IRM = 1 nA
Very low package height: 0.65 mm
AEC-Q101 qualified
3. Applications
•
•
•
Power supply protection
Industrial applications
Power management
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tamb = 25 °C
-
-
24
V
IPPM
rated peak pulse
current
tp = 8/20 µs
[1] [2]
[3] [2]
-
-
-
-
79
A
A
tp = 10/1000 μs
7.7
[1] In accordance with IEC 61000-4-5 (8/20 µs current waveform).
[2] Measured from pin 1 and 2 to pin 3.
[3] In accordance with IEC 61643-321 (10/1000 µs current waveform).
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
5. Pinning information
Table 2. Pinning information
Pin
1
Symbol Description
Simplified outline
Graphic symbol
A
A
K
anode
anode
cathode
3
1, 2
3
2
006aab838
3
1
2
Transparent top view
DFN2020-3 (SOT1061)
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
Version
PTVS24VU1UPA
DFN2020-3
plastic, thermal enhanced ultra thin small outline package; 3
terminals; 1.3 mm pitch; 2 mm x 2 mm x 0.65 mm body
SOT1061
7. Marking
Table 4. Marking codes
Type number
Marking code
PTVS24VU1UPA
D6
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
3500
Unit
PPPM
rated peak pulse power tp = 8/20 µs
tp = 10/1000 μs
[1] [2]
[3] [2]
[1] [2]
[3] [2]
-
W
-
300
79
W
A
IPPM
rated peak pulse current tp = 8/20 µs
tp = 10/1000 μs
-
-
7.7
A
Tj
junction temperature
-
150
150
150
°C
°C
°C
Tamb
Tstg
ambient temperature
-55
-65
storage temperature
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
2 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
Symbol
Parameter
Conditions
Min
Max
Unit
ESD maximum ratings
VESD electrostatic discharge
voltage
IEC 61000-4-2; contact discharge
IEC 61000-4-2; air discharge
[4]
[4]
-
-
30
30
kV
kV
[1] In accordance with IEC 61000-4-5 (8/20 µs current waveform).
[2] Measured from pin 1 and 2 to pin 3.
[3] In accordance with IEC 61643-321 (10/1000 µs current waveform).
[4] Device stressed with ten non-repetitive ESD pulses.
001aaa631
001aaa630
120
I
PP
100 %
90 %
100 % I ; 8 µs
PP
I
PP
(%)
80
-t
e
50 % I ; 20 µs
PP
40
10 %
0
t
t = 0.6 ns to 1 ns
r
0
10
20
30
40
t
(µs)
p
30 ns
60 ns
Fig. 1. 8/20 µs pulse waveform according to
IEC 61000-4-5
Fig. 2. ESD pulse waveform according to
IEC 61000-4-2
006aab319
150
I
PP
(%)
100 % I ; 10 µs
PP
100
50 % I ; 1000 µs
PP
50
0
0
1.0
2.0
3.0
4.0
t
(ms)
p
Fig. 3. 10/1000 µs pulse waveform according to IEC 61643-321
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
3 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
9. Characteristics
Table 6. Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tamb = 25 °C
-
-
24
V
VBR
IRM
breakdown voltage
IR = 1 mA; Tamb = 25 °C
VR = 24 V; Tamb = 25 °C
26.7
-
28.1
1
29.5
50
V
reverse leakage
current
nA
Cd
diode capacitance
clamping voltage
f = 1 MHz; VR = 0 V; Tamb = 25 °C
-
-
-
650
38.5
-
-
pF
V
VCL
IPPM = 79 A; tp = 8/20 µs; Tamb = 25 °C [1] [2]
44.2
38.8
IPPM = 7.7 A; tp = 10/1000 μs;
Tamb = 25 °C
[3] [2]
V
[1] In accordance with IEC 61000-4-5 (8/20 µs current waveform).
[2] Measured from pin 1 and 2 to pin 3.
[3] In accordance with IEC 61643-321 (10/1000 µs current waveform).
006aab321
I
1.2
P
PPM
P
PPM(25°C)
0.8
- V
- V
- V
RWM
V
CL
BR
- I
- I
RM
R
0.4
-
+
P-N
0
0
50
100
150
200
- I
PP
T (°C)
j
- I
PPM
006aab324
Fig. 5. Relative variation of rated peak pulse power
as a function of junction temperature; typical
values
Fig. 4. V-I characteristics for a unidirectional TVS
protection diode
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
4 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
aaa-026934
700
600
500
400
300
200
100
0
C
d
(pF)
0
6
12
18
24
V
(V)
R
f = 1 MHz; Tamb = 25 °C
Fig. 6. Diode capacitance as a function of reverse voltage; typical values
aaa-011962
4
10
P
PPM
(W)
3
2
10
10
10
2
3
4
10
10
10
10
t
(µs)
p
Fig. 7. Rated peak pulse power as a function of a pulse duration; typical values
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
5 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
aaa-026935
aaa-026936
50
0
-2
-4
-6
-8
V
CL
(V)
V
CL
(V)
40
30
20
10
0
-10
-12
-14
0
20
40
60
80
100
120
(A)
-350 -300 -250 -200 -150 -100
-50
0
(A)
I
I
PP
PP
tp = 8/20 μs; according to IEC 61000-4-5
tp = 8/20 μs; according to IEC 61000-4-5
Fig. 8. Positive clamping voltage (8/20 μs pulse);
typical values
Fig. 9. Negative clamping voltage (8/20 μs pulse);
typical values
aaa-026937
aaa-026938
90
0
I
I
PP
PP
(A)
-10
(A)
80
70
60
50
-20
-30
-40
-50
-60
-70
-80
-90
R
= 0.04 Ω
dyn
40
30
20
10
0
0
5
10
15
20
25
30
V
35
(V)
-3
-2
-1
0
V
(V)
CL
CL
tp = 100 ns; Transmission Line Pulse (TLP)
tp = 100 ns; Transmission Line Pulse (TLP)
Fig. 10. Dynamic resistance with positive clamping
voltage; typical value
Fig. 11. Dynamic resistance with negative clamping
voltage; typical value
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
6 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
ESD TESTER
4 GHz DIGITAL
OSCILLOSCOPE
RG 223/U
50 Ω coax
R
d
40 dB
ATTENUATOR
C
s
50 Ω
DUT
(DEVICE
UNDER
TEST)
IEC 61000-4-2 ed.2
= 150 pF; R = 330 Ω
C
s
d
10
8
2
0
V
(kV)
V
(kV)
6
-2
-4
4
2
-6
-8
0
-2
-10
-10
-10
0
10
20
30
40
50
t (ns)
60
70
0
10
20
30
40
50
t (ns)
60
70
unclamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
unclamped -8 kV ESD pulse waveform
(IEC 61000-4-2 network)
aaa-003952
aaa-026940
Fig. 12. ESD clamping test setup and waveforms
aaa-026939
100
CL
60
CL
(V)
V
(V)
80
V
40
60
40
20
0
20
0
V
at 30 ns = 26 V
CL_ESD
V
at 30 ns = -1.7 V
CL_ESD
-20
-40
-60
-20
-40
-10
0
10
20
30
40
50
60
70
-10
0
10
20
30
40
50
60
t (ns)
70
t (ns)
Fig. 13. Clamped +8 kV pulse waveform (IEC 61000-4-2 Fig. 14. Clamped -8 kV pulse waveform (IEC 61000-4-2
network)
network)
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
7 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
10. Application information
The device is designed for the protection of one unidirectional data line from surge pulses and ESD
damage. The device is suitable on lines where the signal polarities are either positive or negative
with respect to ground.
line to be protected
line to be protected
(positive signal polarity)
(negative signal polarity)
TVS diode
TVS diode
GND
GND
unidirectional protection of one line
aaa-019403
Fig. 15. Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge
transients. The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.
2. Minimize the path length between the device and the protected line.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Use ground planes whenever possible. For multilayer PCBs, use ground vias.
11. Test information
Quality information
This product has been qualified in accordance with the Automotive Electronics Council (AEC)
standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in
automotive applications.
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
8 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
12. Package outline
HUSON3: plastic thermal enhanced ultra thin small outline package; no leads;
3 terminals; body 2 x 2 x 0.65 mm
SOT1061
X
v
A B
b
B
A
D
A
A
1
E
terminal 1
index area
detail X
C
terminal 1
index area
y
1
y
e
C
1
2
L
(6×)
e
1
E
h
3
D
h
0
h
1
2 mm
scale
Dimensions
Unit
(1)
A
A
b
D
D
h
E
E
e
e
1
L
v
y
y
1
1
max 0.65 0.04 0.35 2.1 1.6 2.1
1.1
0.9
0.3 0.45
0.2 0.35
mm nom
min
2.0
2.0
1.3
0.1 0.05 0.05
0.25 1.9 1.4 1.9
Note
1. Including plating thickness
sot1061_po
Issue date
References
Outline
version
European
projection
IEC
JEDEC
- - -
JEITA
08-02-04
08-10-07
SOT1061
Fig. 16. Package outline DFN2020-3 (SOT1061)
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
9 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
13. Soldering
2.1
1.3
0.5 (2×)
0.4 (2×)
0.5 (2×) 0.6 (2×)
1.05
0.6
0.55
2.3
0.25
1.1
1.2
0.25
0.25
0.4
0.5
1.6
1.7
Dimensions in mm
solder paste = solder lands
solder resist
occupied area
sot1061_fr
Fig. 17. Reflow soldering footprint for DFN2020-3 (SOT1061)
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
10 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
14. Revision history
Table 7. Revision history
Data sheet ID
Release date
20170627
Data sheet status
Change notice
Supersedes
PTVS24VU1UPA v.1
Product data sheet
-
-
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
11 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
15. Legal information
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Data sheet status
Suitability for use in automotive applications — This Nexperia product
has been qualified for use in automotive applications. Unless otherwise
agreed in writing, the product is not designed, authorized or warranted to
be suitable for use in life support, life-critical or safety-critical systems or
equipment, nor in applications where failure or malfunction of an Nexperia
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. Nexperia and its suppliers accept
no liability for inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Document
status [1][2] status [3]
Product
Definition
Objective
[short] data
sheet
Development This document contains data from
the objective specification for product
development.
Preliminary
[short] data
sheet
Qualification This document contains data from the
preliminary specification.
Product
[short] data
sheet
Production
This document contains the product
specification.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1] Please consult the most recently issued document before initiating or
completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the Internet at URL http://www.nexperia.com.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Definitions
Preview — The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
Nexperia does not give any representations or warranties as to the accuracy
or completeness of information included herein and shall have no liability for
the consequences of use of such information.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Disclaimers
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’ aggregate and cumulative liability towards customer
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
12 / 13
Nexperia
PTVS24VU1UPA
300 W Transient Voltage Suppressor
16. Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 2
9. Characteristics..............................................................4
10. Application information............................................. 8
11. Test information......................................................... 8
12. Package outline.......................................................... 9
13. Soldering................................................................... 10
14. Revision history........................................................11
15. Legal information..................................................... 12
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 27 June 2017
©
PTVS24VU1UPA
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
27 June 2017
13 / 13
相关型号：
PTVS26VP1UP-115
DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC PACKAGE-2, Transient Suppressor
NXP
PTVS26VS1UR-115
DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC PACKAGE-2, Transient Suppressor
NXP
©2020 ICPDF网 联系我们和版权申明