XS3A4051PW [NEXPERIA]
Single low-ohmic 8-channel analog switchProduction;型号: | XS3A4051PW |
厂家: | Nexperia |
描述: | Single low-ohmic 8-channel analog switchProduction |
文件: | 总20页 (文件大小:310K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
XS3A4051
Single low-ohmic 8-channel analog switch
Rev. 1 — 11 February 2022
Product data sheet
1. General description
The XS3A4051 is a low-ohmic 8-channel analog switch, suitable for use as an analog or digital
multiplexer/demultiplexer. The XS3A4051 has three digital select inputs (S1 to S3), eight
independent inputs/outputs (Y0 to Y7) and a common input/output (Z). All eight switches share
an enable input (E). A HIGH on E causes all switches into the high impedance OFF-state,
independent of Sn.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall
times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V
applications without significant increase in supply current ICC. This makes it possible for the
XS3A4051 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level
translation. The XS3A4051 allows signals with amplitude up to VCC to be transmitted from Z to Yn
or from Yn to Z. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation
and distortion of transmitted signals.
2. Features and benefits
•
•
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
•
•
•
•
•
1.6 Ω (typical) at VCC = 1.4 V
1.0 Ω (typical) at VCC = 1.65 V
0.55 Ω (typical) at VCC = 2.3 V
0.50 Ω (typical) at VCC = 2.7 V
0.50 Ω (typical) at VCC = 4.3 V
•
•
•
Break-before-make switching
High noise immunity
ESD protection:
•
•
•
HBM ANSI/ESDA/JEDEC JS-001 exceeds 8000 V
CDM ANSI/ESDA/JEDEC JS-002 exceeds 1000 V
IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
•
•
•
•
•
•
•
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD78 Class II Level A
Low-switching threshold levels
Control input accepts voltages above supply voltage
Very low supply current, even when input is below VCC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Applications
•
•
•
•
•
•
Appliances
Communication Systems
Medical Equipment
Analog Sensor Monitoring
Audio Routing/Switching
Test and Measurement
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
4. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
XS3A4051PW
-40 °C to +125 °C
TSSOP16
plastic thin shrink small outline package; 16 leads;
body width 4.4 mm
SOT403-1
5. Functional diagram
11
0
0
7
10
9
8 X
2
6
G8
13
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
MUX/DMUX
11
10
9
14
15
12
1
S1
S2
S3
13
14
15
12
1
0
1
2
3
4
5
6
3
5
5
2
2
6
4
E
3
Z
4
7
001aal657
001aad542
Fig. 1. Logic symbol
Fig. 2. IEC logic symbol
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
2 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
V
CC
16
13
Y0
11
10
9
14
S1
S2
S3
E
Y1
15
Y2
12
Y3
LOGIC
LEVEL
CONVERSION
1-OF-8
DECODER
1
Y4
5
Y5
2
Y6
6
4
Y7
3
Z
GND
8
aaa-034306
Fig. 3. Functional diagram
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
3 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
6. Pinning information
6.1. Pinning
XS3A4051
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Y4
Y6
V
CC
Y2
Y1
Y0
Y3
S1
S2
S3
Z
Y7
Y5
E
n.c.
GND
aaa-034307
Fig. 4. Pin configuration SOT403-1 (TSSOP16)
6.2. Pin description
Table 2. Pin description
Symbol
Pin
Description
E
6
enable input (active LOW)
not connected
n.c.
7
GND
8
ground supply voltage
select input
S1, S2, S3
11, 10, 9
Y0, Y1, Y2, Y3, Y4, Y5, Y6, Y7
13, 14, 15, 12, 1, 5, 2, 4
independent input or output
common output or input
supply voltage
Z
3
VCC
16
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
4 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
7. Functional description
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care.
Input
Channel ON
E
L
L
L
L
L
L
L
L
H
S3
L
S2
L
S1
L
Y0 to Z
Y1 to Z
Y2 to Z
Y3 to Z
Y4 to Z
Y5 to Z
Y6 to Z
Y7 to Z
switches off
L
L
H
L
L
H
H
L
L
H
L
H
H
H
H
X
L
H
L
H
H
X
H
X
8. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
-0.5
-0.5
-0.5
-50
-
Max
+4.6
+4.6
Unit
V
VCC
VI
supply voltage
input voltage
Sn and E inputs
[1]
[2]
V
VSW
IIK
switch voltage
VCC + 0.5 V
input clamping current
switch clamping current
switch current
VI < -0.5 V
-
mA
ISK
ISW
VI < -0.5 V or VI > VCC + 0.5 V
±50
±350
mA
mA
VSW > -0.5 V or VSW < VCC + 0.5 V;
source or sink current
-
VSW > -0.5 V or VSW < VCC + 0.5 V;
pulsed at 1 ms duration, < 10 % duty cycle;
peak current
-
±500
mA
Tstg
Ptot
storage temperature
total power dissipation
-65
-
+150
500
°C
Tamb = -40 °C to +125 °C
[3]
mW
[1] The minimum input voltage rating may be exceeded if the input current rating is observed.
[2] The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed but may not
exceed 4.6 V.
[3] For SOT403-1 (TSSOP16) package: Ptot derates linearly with 8.5 mW/K above 91 °C.
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
5 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
9. Recommended operating conditions
Table 5. Recommended operating conditions
Symbol Parameter
Conditions
Min
1.4
0
Max
4.3
Unit
V
VCC
VI
supply voltage
input voltage
Sn and E inputs
4.3
V
VSW
Tamb
Δt/ΔV
switch voltage
[1]
[2]
0
VCC
+125
200
V
ambient temperature
input transition rise and fall rate
-40
-
°C
ns/V
Sn and E inputs; VCC = 1.4 V to 4.3 V
[1] To avoid sinking GND current from terminal Z when switch current flows in terminal Yn, the voltage drop across the bidirectional switch
must not exceed 0.4 V. If the switch current flows into terminal Z, no GND current will flow from terminal Yn. In this case, there is no
limit for the voltage drop across the switch.
[2] Applies to control signal levels.
10. Static characteristics
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground 0 V).
Symbol Parameter
Conditions
Tamb = 25 °C
Tamb
=
Tamb
=
Unit
−40 °C to +85 °C
−40 °C to +125 °C
Min Typ Max
Min
0.9
0.9
1.1
1.3
1.4
-
Max
-
Min
0.9
0.9
1.1
1.3
1.4
-
Max
-
VIH
HIGH-level
input voltage
VCC = 1.4 V to 1.6 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 3.6 V to 4.3 V
VCC = 1.4 V to 1.6 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 3.6 V to 4.3 V
0.9
0.9
1.1
1.3
1.4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
V
V
V
V
V
V
V
V
V
V
μA
-
-
-
-
-
-
-
-
-
-
-
VIL
LOW-level
input voltage
0.3
0.4
0.4
0.5
0.6
-
0.3
0.4
0.4
0.5
0.6
±0.5
0.3
0.3
0.4
0.5
0.6
±1
-
-
-
-
-
-
-
-
-
-
-
-
II
input leakage Sn and E input;
-
-
-
current
VI = GND to 4.3 V;
VCC = 1.4 V to 4.3 V
IS(OFF)
OFF-state
leakage
current
Y1 and Y2 port; see Fig. 5
VCC = 1.4 V to 3.6 V
VCC = 3.6 V to 4.3 V
Z port; see Fig. 6
-
-
-
-
±5
-
-
±50
±50
-
-
±500
±500
nA
nA
±10
IS(ON)
ON-state
leakage
current
VCC = 1.4 V to 3.6 V
VCC = 3.6 V to 4.3 V
-
-
-
-
±15
±20
-
-
±150
±150
-
-
±1500 nA
±1500 nA
ICC
supply current VI = VCC or GND;
VSW = GND or VCC
VCC = 3.6 V
VCC = 4.3 V
-
-
-
-
100
150
-
-
690
800
-
-
6000 nA
7000 nA
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
6 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
Symbol Parameter
Conditions
Tamb = 25 °C
Tamb
=
Tamb
=
Unit
−40 °C to +85 °C
−40 °C to +125 °C
Min Typ Max
Min
Max
Min
Max
ΔICC
additional
VSW = GND or VCC
supply current
VI = 2.6 V; VCC = 4.3 V
VI = 2.6 V; VCC = 3.6 V
VI = 1.8 V; VCC = 4.3 V
VI = 1.8 V; VCC = 3.6 V
VI = 1.8 V; VCC = 2.5 V
Sn and E input
-
-
-
-
-
-
2.0 4.0
0.35 0.7
7.0 10.0
2.5 4.0
50 200
-
-
-
-
-
-
7
1
-
-
-
-
-
-
7
1
μA
μA
μA
μA
nA
pF
15
5
15
5
300
-
500
-
CI
input
capacitance
1.0
-
-
-
CS(OFF) OFF-state
capacitance
-
-
35
-
-
-
-
-
-
-
-
pF
pF
CS(ON)
ON-state
350
capacitance
Table 7. ON resistance
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for graphs see Fig. 8 to Fig. 14.
Symbol Parameter
Conditions
Tamb = -40 °C to +85 °C Tamb = -40 °C to +125 °C Unit
Min
Typ[1]
Max
Min
Max
RON(peak) ON resistance
(peak)
VI = GND to VCC;
ISW = 100 mA; see Fig. 7
VCC = 1.4 V
-
-
-
-
-
1.6
1.0
3.7
1.6
-
-
-
-
-
4.1
1.7
0.9
0.9
0.9
Ω
Ω
Ω
Ω
Ω
VCC = 1.65 V
VCC = 2.3 V
0.55
0.5
0.8
VCC = 2.7 V
0.75
0.75
VCC = 4.3 V
0.5
ΔRON
ON resistance
mismatch
between
VI = GND to VCC
ISW = 100 mA
;
[2]
VCC = 1.4 V; VSW = 0.4 V
VCC = 1.65 V; VSW = 0.5 V
VCC = 2.3 V; VSW = 0.7 V
VCC = 2.7 V; VSW = 0.8 V
VCC = 4.3 V; VSW = 0.8 V
-
-
-
-
-
0.07
0.07
0.05
0.05
0.05
0.30
0.20
0.10
0.10
0.10
-
-
-
-
-
0.30
0.30
0.13
0.13
0.13
Ω
Ω
Ω
Ω
Ω
channels
RON(flat) ON resistance
(flatness)
VI = GND to VCC
ISW = 100 mA
;
[3]
VCC = 1.4 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 4.3 V
-
-
-
-
-
1.0
0.5
3.3
1.2
0.3
0.3
0.4
-
-
-
-
-
3.6
1.3
Ω
Ω
Ω
Ω
Ω
0.15
0.13
0.2
0.35
0.35
0.45
[1] Typical values are measured at Tamb = 25 °C.
[2] Measured at identical VCC, temperature and input voltage.
[3] Flatness is defined as the difference between the maximum and minimum value of ON resistance measured at identical VCC and
temperature.
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
7 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
10.1. Test circuits and graphs
V
CC
Sn
Z
V
or V
IH
IL
Yn
I
S
E
V
V
O
I
V
IH
GND
001aal661
VI = 0.3 V or VCC - 0.3 V; VO = VCC - 0.3 V or 0.3 V
Fig. 5. Test circuit for measuring OFF-state leakage current
V
CC
Sn
Z
Y1-Y7
Y0
V
IL
or V
IH
I
S
n.c.
E
GND
V
I
V
O
V
IL
aaa-034308
VI = 0.3 V or VCC - 0.3 V; VO = VCC - 0.3 V or 0.3 V
Fig. 6. Test circuit for measuring ON-state leakage current
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
8 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
aaa-031205
1.6
R
ON
(Ω)
1.2
(1)
0.8
0.4
0
(2)
(3)
(4)
(5)
(6)
V
SW
V
0
1
2
3
4
5
V (V)
I
V
CC
(1) VCC = 1.5 V
(2) VCC = 1.8 V
(3) VCC = 2.5 V
(4) VCC = 2.7 V
(5) VCC = 3.3 V
(6) VCC = 4.3 V
Sn
Z
V
or V
IH
IL
Yn
E
V
I
SW
I
V
IL
GND
001aal663
Measured at Tamb = 25 °C
RON = VSW / ISW
Fig. 8. Typical ON resistance as a function of input
voltage
Fig. 7. Test circuit for measuring ON resistance
aaa-031206
aaa-031207
1.6
1.0
R
ON
(Ω)
R
ON
(Ω)
0.8
1.2
(1)
(2)
(3)
(4)
0.6
0.4
0.2
0
(1)
(2)
(3)
(4)
0.8
0.4
0
0
1
2
3
0
1
2
3
V (V)
I
V (V)
I
(1) Tamb = 125 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = -40 °C
(1) Tamb = 125 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = -40 °C
Fig. 9. ON resistance as a function of input voltage;
VCC = 1.5 V
Fig. 10. ON resistance as a function of input voltage;
VCC = 1.8 V
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
9 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
aaa-031208
aaa-031209
1.0
1.0
R
ON
(Ω)
R
ON
(Ω)
0.8
0.8
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
0.6
0.4
0.2
0
0.6
0.4
0.2
0
0
1
2
3
0
1
2
3
V (V)
V (V)
I
I
(1) Tamb = 125 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = -40 °C
(1) Tamb = 125 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = -40 °C
Fig. 11. ON resistance as a function of input voltage;
VCC = 2.5 V
Fig. 12. ON resistance as a function of input voltage;
VCC = 2.7 V
aaa-031210
aaa-031211
1.0
1.0
R
ON
(Ω)
R
ON
(Ω)
0.8
0.8
(1)
(2)
(3)
(4)
0.6
0.4
0.2
0
0.6
0.4
0.2
0
(1)
(2)
(3)
(4)
0
1
2
3
4
0
1
2
3
4
5
V (V)
I
V (V)
I
(1) Tamb = 125 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = -40 °C
(1) Tamb = 125 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = -40 °C
Fig. 13. ON resistance as a function of input voltage;
VCC = 3.3 V
Fig. 14. ON resistance as a function of input voltage;
VCC = 4.3 V
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
10 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
11. Dynamic characteristics
Table 8. Dynamic characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for test circuit see Fig. 17.
Symbol Parameter Conditions
Tamb = 25 °C
Tamb = −40 °C
to +85 °C
Tamb = −40 °C Unit
to +125 °C
Min
Typ[1]
Max
Min
Max
Min
Max
ten
enable time E, Sn to Z or Yn;
see Fig. 15
VCC = 1.4 V to 1.6 V
-
-
-
-
-
50
36
24
22
22
110
70
45
40
40
-
-
-
-
-
120
80
50
45
45
-
-
-
-
-
120 ns
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
90
55
50
50
ns
ns
ns
ns
VCC = 2.7 V to 3.6 V
VCC = 3.6 V to 4.3 V
tdis
disable time E, Sn or Yn; see Fig. 15
VCC = 1.4 V to 1.6 V
-
-
-
-
-
32
20
12
10
10
90
55
25
20
20
-
-
-
-
-
90
60
30
25
25
-
-
-
-
-
90
65
35
30
30
ns
ns
ns
ns
ns
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 3.6 V to 4.3 V
tb-m
break-
see Fig. 16
[2]
before-make
time
VCC = 1.4 V to 1.6 V
-
-
-
-
-
19
17
13
10
10
-
-
-
-
-
9
7
4
3
2
-
-
-
-
-
9
7
4
3
2
-
-
-
-
-
ns
ns
ns
ns
ns
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 3.6 V to 4.3 V
[1] Typical values are measured at Tamb = 25 °C and VCC = 1.5 V, 1.8 V, 2.5 V, 3.3 V and 4.3 V respectively.
[2] Break-before-make guaranteed by design.
11.1. Waveforms and test circuit
V
I
Sn, E input
V
V
t
M
M
GND
t
dis
en
V
OH
V
V
X
X
output
OFF to HIGH
HIGH to OFF
GND
t
t
en
dis
V
OH
V
V
X
X
output
HIGH to OFF
OFF to HIGH
GND
001aal664
Measurement points are given in Table 9.
Logic level: VOH is typical output voltage level that occurs with the output load.
Fig. 15. Enable and disable times
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
11 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
Table 9. Measurement points
Supply voltage
Input
VM
Output
VX
VCC
1.4 V to 4.3 V
0.5VCC
0.9VOH
V
CC
V
or V
IH
IL
Sn
Z
Yn
E
G
V
I
V = 1.5 V
EXT
V
R
L
C
L
V
O
V
IL
GND
001aal665
a. Test circuit
V
0.5 V
I
I
0.9 V
0.9 V
O
O
V
O
t
b-m
aaa-031214
b. Input and output measurement points
Fig. 16. Test circuit for measuring break-before-make times
V
CC
V
or V
IH
IL
Sn
Z
Yn
E
G
V
I
V
EXT
= 1.5 V
V
R
L
C
L
V
O
V
IL
GND
001aal666
Test data is given in Table 10.
Definitions test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
VEXT = External voltage for measuring switching times.
Fig. 17. Test circuit for measuring switching times
Table 10. Test data
Supply voltage
VCC
Input
VI
Load
CL
tr, tf
RL
1.4 V to 4.3 V
VCC
≤ 2.5 ns
35 pF
50 Ω
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
12 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
11.2. Additional dynamic characteristics
Table 11. Additional dynamic characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V);
VI = GND or VCC (unless otherwise specified); tr = tf ≤ 2.5 ns.
Symbol Parameter
Conditions
Tamb = 25 °C
Typ
Unit
Min
Max
THD
total harmonic
distortion
fi = 20 Hz to 20 kHz; RL = 32 Ω; see Fig. 18
VCC = 1.4 V; VI = 1 V (p-p)
VCC = 1.65 V; VI = 1.2 V (p-p)
VCC = 2.3 V; VI = 1.5 V (p-p)
VCC = 2.7 V; VI = 2 V (p-p)
VCC = 4.3 V; VI = 2 V (p-p)
RL = 50 Ω; see Fig. 19
[1]
-
-
-
-
-
0.17
0.10
0.05
0.04
0.01
-
-
-
-
-
%
%
%
%
%
f(-3dB)
-3 dB frequency
response
[1]
[1]
[1]
VCC = 1.4 V to 4.3 V
-
-
15
-
-
MHz
dB
αiso
isolation (OFF-state) fi = 100 kHz; RL = 50 Ω; see Fig. 20
VCC = 1.4 V to 4.3 V
-90
Vct
crosstalk voltage
between digital inputs and switch; fi = 1 MHz;
CL = 50 pF; RL = 50 Ω; see Fig. 21
VCC = 1.4 V to 3.6 V
VCC = 3.6 V to 4.3 V
-
-
0.2
0.3
-
-
V
V
Xtalk
Qinj
crosstalk
between switches; fi = 100 kHz; RL = 50 Ω;
see Fig. 22
[1]
VCC = 1.4 V to 4.3 V
-
-90
-
dB
charge injection
fi = 1 MHz; CL = 0.1 nF; RL = 1 MΩ; Vgen = 0 V; [1]
Rgen = 0 Ω; see Fig. 23
VCC = 1.5 V
VCC = 1.8 V
VCC = 2.5 V
VCC = 3.3 V
VCC = 4.3 V
-
-
-
-
-
3
4
-
-
-
-
-
pC
pC
pC
pC
pC
6
9
15
[1] fi is biased at 0.5VCC
.
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
13 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
11.3. Additional test circuits
V
0.5V
CC
CC
Sn
Z
R
L
V
IL
or V
IH
Yn
E
f
D
i
V
IL
GND
001aal667
Fig. 18. Test circuit for measuring total harmonic distortion
V
0.5V
CC
CC
Sn
Z
R
L
V
IL
or V
IH
Yn
E
f
dB
i
V
IL
GND
001aal668
Adjust fi voltage to obtain 0 dBm level at output. Increase fi frequency until dB meter reads -3 dB.
RS = RL = 50 Ω (standard 50 Ω system).
Fig. 19. Test circuit for measuring the frequency response when channel is in ON-state
0.5V
0.5V
CC
CC
V
CC
R
L
R
L
Sn
Z
V
or V
IH
IL
Yn
E
f
dB
i
V
IH
GND
001aal669
Adjust fi voltage to obtain 0 dBm level at input.
Fig. 20. Test circuit for measuring isolation (OFF-state)
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
14 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
0.5V
0.5V
CC
CC
V
CC
R
L
R
L
Sn
V
or V
IL
IH
Z
E
Yn
logic
input
G
V
I
C
L
V
O
V
GND
001aal670
a. Test circuit
logic input
(Sn, E)
off
on
off
V
V
ct
O
001aal671
b. Input and output pulse definitions
Fig. 21. Test circuit for measuring crosstalk voltage between digital input and switch
0.5V
0.5V
CC
CC
V
CC
R
L
R
L
Sn
Z
Y0
Yn
V
or V
IL
IH
IH
E
f
dB
i
V
GND
001aal672
Fig. 22. Test circuit for measuring crosstalk between switches
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
15 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
V
CC
Sn
Z
Yn
E
R
gen
V
IL
G
V
I
V
gen
V
R
L
C
L
V
O
GND
001aal673
a. Test circuit
logic input
(Sn, E)
off
on
off
V
O
V
O
001aal674
b. Input and output pulse definitions
Qinj = ΔVO × CL.
ΔVO = output voltage variation.
Rgen = generator resistance.
Vgen = generator voltage.
Fig. 23. Test circuit for measuring charge injection
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
16 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
12. Package outline
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
D
E
A
X
c
y
H
v
M
A
E
Z
9
16
Q
(A )
3
A
2
A
A
1
pin 1 index
θ
L
p
L
1
8
detail X
w
M
b
p
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(2)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
Q
v
w
y
Z
θ
1
2
3
p
E
p
max.
8o
0o
0.15
0.05
0.95
0.80
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
6.6
6.2
0.75
0.50
0.4
0.3
0.40
0.06
mm
1.1
0.65
1
0.2
0.13
0.1
0.25
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-18
SOT403-1
MO-153
Fig. 24. Package outline SOT403-1 (TSSOP16)
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
17 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
13. Abbreviations
Table 12. Abbreviations
Acronym
CDM
Description
Charged Device Model
CMOS
ESD
Complementary Metal-Oxide Semiconductor
ElectroStatic Discharge
HBM
Human Body Model
14. Revision history
Table 13. Revision history
Document ID
Release date
20220211
Data sheet status
Change notice
Supersedes
XS3A4051 v.1
Product data sheet
-
-
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
18 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
15. Legal information
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status Product
Definition
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1][2]
status [3]
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
19 / 20
Nexperia
XS3A4051
Single low-ohmic 8-channel analog switch
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Ordering information....................................................2
5. Functional diagram.......................................................2
6. Pinning information......................................................4
6.1. Pinning.........................................................................4
6.2. Pin description.............................................................4
7. Functional description................................................. 5
8. Limiting values............................................................. 5
9. Recommended operating conditions..........................6
10. Static characteristics..................................................6
10.1. Test circuits and graphs.............................................8
11. Dynamic characteristics...........................................11
11.1. Waveforms and test circuit.......................................11
11.2. Additional dynamic characteristics...........................13
11.3. Additional test circuits..............................................14
12. Package outline........................................................ 17
13. Abbreviations............................................................18
14. Revision history........................................................18
15. Legal information......................................................19
© Nexperia B.V. 2022. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 11 February 2022
©
XS3A4051
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 1 — 11 February 2022
20 / 20
相关型号:
©2020 ICPDF网 联系我们和版权申明